E-Brochure - Thermal Insulation Tiles
Transcription
E-Brochure - Thermal Insulation Tiles
Sensible Cooling PCM TECHNOLOGY TM insulla Planet Protection As Per IS 1237-1980 Y DL EC FRIEN Tiles For Roof & Deck Heat Reflective Waterproof Stainfree Anti-Skid Think Smart Think Different TM insulla Thermal Insulating Tiles for External Use TM insulla Heat Insulation Tiles are made from PCM Technology by using micro encapsulated PCM’s (Phase Change Material) which being leak-proof and stable and selected geo-in-organic products as binders using a special mechanical process. The external surface of the tiles is also designed to provide a smooth, glozzy and 100% waterproofing guaranteed surface which remains permanent. After uses it reduces power consumption and save money and hence this technology is helpful in strengthening countries economy. How do PCMs Work? All materials have the capacity to absorb & release heat energy with an accompanying temperature change, and such absorbed or released heat is known as sensible heat. Sensible heat is readily determined from the material’s mass, specific heat capacity and temperature change. Capsule Shell Core: PCM in solid state Temperature Raises As PCM solifies, heat energy is released back to the environment Photomicrograph of PCM Capsules Temperature Fails Capsule Shell As PCM melts, it absorbs heat energy Core: PCM in liquid state PCMs (Phase Change Material) undergo sensible heat change like other materials, however at certain temperatures, depending on the selected PCM, they additionally undergo a phase change, whereby the material melts or freezes. The absorbed or released heat energy associated with such phase changes is known as latent heat, and PCMs are sometimes referred to as latent heat storage materials. As the phase change process is roughly isothermal, with a minimal temperature change, the heat absorbed or released can work to buffer the temperature of the PCM’s immediate environment towards this phase change applications. High thermal storage density also allows PCMs to be used for efficient storage of heat or cold, and in this sense the PCM can be considered to be a thermal battery. Salient Features Provide Thermal Insulation; Replaces lime terracing; Cost Effective; Reusable for many times; Natural Airconditioning to maintain a congenial thermal environment; Reduces use of AC & hence lessens CFC emission; Reduces power consumption & hence reduces electricity bill; light weight and high dimensional stability; Durable condition; Withstand considerable amount of load; Provide smooth surface finish and act as a good waterproofing; Fireproofing; Colourful surface it looks decorative; Anti-skid by specially treated surface; Stainfree & 100% washable. Dimensions 9” X 9” (225mm X 225mm) Standard Sizes 9” X 4.5” (225mm X 112.5mm) 4.5” X 4.5” (112.5mm X 112.5mm) Standard Thickness 15mm Colours Available: White Yellow Green Sandal Yellow Blue Copper Brown Sky Blue Infrared Reflective Chart White TSR 93% 100% 80% 60% 40% 20% 0% 1000 700 400 1600 1300 Yellow 2200 2500 TSR 81% Sandal Yellow TSR 66% 100% 100% 80% 80% 60% 60% 40% 40% 20% 20% 0% 400 700 1000 1300 Sky Blue 1600 2200 0% 2500 TSR 74% 80% 80% 60% 60% 40% 40% 20% 20% 700 1000 1300 Copper Brown 1600 2200 0% 2500 TSR 38% 80% 80% 60% 60% 40% 40% 20% 20% 700 1000 1300 1600 2200 2500 1600 2200 2500 400 700 1000 1300 1600 2200 2500 TSR 25% 100% 400 1300 Green 100% 0% 1000 TSR 28% 100% 400 700 Blue 100% 0% 400 0% 400 700 1000 1300 1600 2200 2500 TSR = “Total Solar Reflectance” (uv, visible, IR, according to ASTM E903-96, with opaque PVDF films). Colors swatches are approximate and for representation only. TM Physical Properties - INSULLA White Colour Specific Gravity 1.45 - 1.5 gm/cm3 Water Absorption 8.5% (at sat. after 96hrs.) Solar Reflectance Index (SRI) 96.0 Reflectance 0.76 Emittance 0.92 Thermal Conductivity 0.18 W/mK (As per ASTM C518 : 2010 Standard) Abrasion Resistance 0.3mm to 0.5mm Max IS Standard As per IS 1237 - 1980 Waterproofing 100% (Exterior Surface) Surface Non-Skid Unit wt. 3.0 kg/Sq.ft Mechanical Properties Crushing Strength (28 days) 113.7 kg/cm2 (min) Flexural Strength (7 days) 52Kg/cm2 (min) Physical and mechanical properties of the tile were tested as per BIS Standards. Why INSULLATM Tiles Because it: Cools inside the room of top floor Replaces the lime terracing as well as it acts as waterproofing layer Reduces the roofing cost of building Cools inside room in the summer and warm in winter Reduces the dead load of building Reduces the electricity bill Fulfilling the BIS Values Reduces the CFC emissions Cost effective than lime terracing Easy in handling and placing High Durability Roof top can be utilized for various purposes Applications It is for exterior use to cover the roof or wall cladding. The application procedures are same as normal roof tiles. Roof Top of Buildings Wall of Buildings Cold Storage (Roof top, inner and outer side of wall) Swimming Pool Bays Temple Walk Ways Cool Concepts Scheme1 Scheme2 Scheme3 Demo Scheme4 Scheme5 Scheme6 Demo Scheme7 Scheme8 Scheme9 Demo Scheme10 Scheme11 Scheme12 Demo TM JAPEVA ENGINEERING PVT.LTD., #115, MB Plot, Vanagaram Main Road, Metro Nagar, Alapakkam, Chennai-600 116.Tamil Nadu. India. E-Mail: [email protected] web: www.insulla.com Phone: 91-44-24 76 62 12 / 30 62 62 62 / 8056-345678