PHENOM 100 - Inwavetech
Transcription
PHENOM 100 - Inwavetech
PHENOM 100 AM Technology Antenna • • • • • • • • • • • • Fully Integrated Electronic Two loop Antenna Detection up to 1,00m each side with labels Compatible with all 58kHz Hard Tags and Labels providers Mono antenna Master with optional Slave Antenna Wireless setting with Palm© or web browser (wifi, internet / ethernet) Ultra Fast Logical Technology Easy to fix and install Independent setting Buzzer/Lamp duration and type Fast detection up to 3,00m/sec Easy Trimmer setting monitoring antenna current Only need 220Vac/110Vac supply connection INWAVE TECHNOLOGIES: Our EAS Solutions use significantly more advanced technology than other products on the market for an equivalent investment. The PHENOM system is a stand-alone antenna able to detect 58kHz Labels and Hard Tags, from any provider. The anti-theft system emits a beep and red light signal at the exit of the store when an activated Label (that has not been deactivated at the checkout) or when a Hard Tag (that cannot be deactivated) is passing through the magnetic field of the antennas. The PHENOM System allows full adjustments by a Palm Software communicating with the electronic board through an IR wireless interface. That includes basic adjust as buzzer duration and volume as complex adjust only authorized for trained technician. The PHENOM antenna is fitted with all the electronic boards inside providing easier installation and connection. [email protected] www.inwavetech.com Phone: + 55 21 2604 2685 Electronic Technician Settings Operating Frequency Field rotation 58.0/58.2 kHz Field rotation Hor/Ver/Multiplex Vertical/Horizontal Frequency transmission 58.0/58.2/Multiplex Antenna Current Receiver Inputs 16A peak 2Ports multiplexed Step Frequency receiver 28.5Hz Integrated Counter Alarm 4Bytes EEprom Burst Transmission duration Sinal/Noise Ratio 0-6dB (15steps) 3-10 (7steps) AC-191 Adjustment interface (palm) AC-192 Web ethernet adjustment interface AC-193 Web wifi adjustment interface AC-300 Events remote logger AC-310 Relay output board AC-460 Anti-jamming AC-410 Pager transmiter AC-411 Pager receiver 0-3 (3steps) >57.597 <59.831 255 steps Buzzer duration 0 to 15sec (16 steps for change Q filter limits) Lamp duration Lamp blinking choice 0 to 15sec 4 Electrical Entry voltage Frequency Consumption Primary Power Fuse [email protected] www.inwavetech.com >20 <120 Mechanical Size 42.7x11.3cm Height 152cm Weight Master Pedestal 12.3Kg Weight Single Pedestal 11.8Kg Weight Slave Pedestal 8.1Kg 220/110Vac 50/60Hz 160W Max 2.5A Accessories Hits for Alarm Sensibility 15 steps or trimpot PHENOM slave antenna IRDA adapter (for adjustments) Q tag range Buzzer Volume PHENOM master antenna PH-102 AC-190 Frequency tag range 4 PH-101 300-920µS (15steps) 255 steps Buzzer melody choice PHENOM System (Mst.+Slv.) 1.6/1.0/0.8/0.5 ms (16 steps for change Frequency filter limits) Transmission delay PH-100 Receiver delay Background filter Basic Settings Purchase code External Conditions Temperature 0 to 45° C Relative air humidity up to 90% Add “I” for Ipoint Wireless setting with Palm© or web browser (wifi, internet / Ethernet) Tested LCIE - Laboratoire Central des Industies Electriques - Une Société de Bureau Veritas - France Phone: + 55 21 2604 2685