Trasram Plaster LM-104

Trasram Plaster LM-104
Premium Mortar
09/13(1)
__________________________________________________________________________________
Description
LeichtMixTrasram Plaster LM-104 is a premium Quality cement base waterproofing Plaster. It exhibits
durable hydrophobic protection layer to most masonry and brick wall substrate.
ADVANTAGE
- Practical, ready to use just added water
- Premixed to ensure consistent quality
- Good adhesion with high water retention properties
- Easy to mix with good workability
- Application for interior or exterior area.
TECHNICAL DATA
Color
Binder
Filler
Density (wet)
Water retentivity %
Grey
Portland cement
Graded Silica Sand
Approx. 2000 kg/m3
>93%
BS 4551Pt 1:1998
Compressive strength
10 N/mm2
BS EN1015-11:1999
Stiffening Time: (min)
BS EN1015-9:1999
Mixing Ratio
Thickness of Application
Theoretical Coverage
1.0N/mm2: <350
2.0N/mm2: <400
5.6 to 6.4 litre of water
per 40 kgs bag
10 to 15 mm/coat
Approx. 2.5 m2/40
kg/10 mm thickness
APPLICATION METHOD
Surface Preparation
The substrate must be clean & free from grease and
loose particles. Pre-wet porous substrate prior to application
of plaster to prevent premature loss of water from the plaster.
Mixing
Placed required amount of water in a bucket, Pour the powder
while mixing for at least 3 minutes with a mechanical mixer to
achieve good consistency.
Placing
Insert pressure while applying plaster to the substrate with steel
or wooden trowel to ensure optimum bonding of plaster to the
substrate.
To enchance the adhesion of Leichtmix WP, a splatter dash with
Leichtmix bonding agent is recommended to be applied to the
substrate prior to placing the plaster.
Packing & storage
Leichtmix Trasram Plaster LM-104 is packed in 40 kg bag.
Storage
Shelf life is 6 month if stored in original seal under cool & dry condition.
PT Broco Aerated Concrete Industry
Jl.Raya Serang KM59 Desa Situterate.
Kec. Cikande, Serang 42186
Banten Indonesia.
Tel: 0254-406193 Fax: 0254-400137
Cust. Service :0807 1 Broco 8 (0807 1 27626 8)
WWW.leichtmix .com
a signature of
All information contained in this product data sheet are to be used as a guide and reference only, based on laboratory testing and theoretical
calculations. It is the duty and responsibility of users to discern and interpret the said information and to make the decision based on his/her intended
application and desired effect. We therefore cannot be held responsible for final outcome and performance of product used at site, which differs one
from another due to local conditions, methods of applications, and workmanship level. We reserve the right to make changes at any time to said
information without prior notice to anyone.