Pro Finish Bravo I XC Propeller Information Sheet

Transcription

Pro Finish Bravo I XC Propeller Information Sheet
THE MERCURY RACING PRO FINISH BRAVO I XC PROPELLER, designed
specifically for single outboard powered hulls, features a tremendous
amount of blade cup. The enhanced cup enables the engine to be run at
elevated transom heights – without sacrificing performance. The larger
blade area enables the prop to stay hooked up for quick planing and
enhanced performance throughout the engine rpm range. The exhaust
tube is designed to support planing and stability at lower speeds.
The Bravo I XC diameter is increased to 15.3" and currently features a
pitch range of 20", 22” and 24” right hand rotation. Simmons Custom
Boats, a manufacturer of high performance flats boats, has been
instrumental in development and testing. The Bravo I XC outperformed
many four blade offerings with shorter time to plane, improved grip at
lower speeds and quicker throttle response.
PART # MC 2243 Rev B ©2015 MERCURY MARINE All Rights Reserved. Reproduction in whole or in part without permission is
prohibited. All models and specifications are subject to change without notice or without incurring obligations to modify previously
manufactured products. All other trademarks belong to Brunswick Corporation.
PITCH/DIA
RIGHT-HAND
20”/15.3”
48-8M0100110
22”/15.3”
48-8M0100111
24”/15.3”
48-8M0100112