Intended Recipient - nanoPrecision Products Inc

Transcription

Intended Recipient - nanoPrecision Products Inc
Date: April 22, 2015
Job Title: Mechanical Engineer
Location: El Segundo, CA
Educational Requirement: Masters in Mechanical Engineering
Job Summary:

Responsible to create and develop the Optical Fiber Sub Assembly (OFSA) Products as
required by the customer. This requires creating top and subassembly layouts, detailed
drawings and process /working instructions conforming to the drawings and specifications.
Develop process fixture drawings to enhance or improve the manufacturing processes.
Work diligently in teams to continuously satisfy project schedule requirements. Support a
highly professional staff on design and process elements of the OFSA line, and others as
needed. Coordinate with other tool designers and technical staff on high-volume design
and implementation for OFSA products. Additional manufacturing support duties include
monitoring process trends by observing product yields and failures over time and per
process. Work with Quality Department on vendor product improvements and conformity.
Must be a self starter and passionate on his/her responsibilities and assignments.
Responsibilities:








Work on detailed OFSA drawing and release them to Production level with corresponding
Production part numbers
Design tooling/fixtures for OFSA ramp up efforts
Assemble and release Bill of Materials list that supports each of the OFSA assembly levels
Implement Test standards for process monitoring
Monitor Yield trends and Pareto failures
Failure analysis/corrective action plan
Work with Part vendors on quality, lead-times
Execute on leadership initiative and drive task from start to finish
Requirements:




Preferred Masters Degree in Mechanical Engineering from a 4-year college or university, or
equivalent, with a minimum GPA of 3.0/4.0. and 1+ years’ industry experience, or
Bachelor’s degree in Mechanical Engineering from a 4-year college or university, or
equivalent, with a minimum GPA of 3.0/4.0. and 3+ years’ industry experience.
3+ years in CAD software and capable to apply drawing design disciplines
Knowledgeable in Material Science with various applications of solders and epoxies.
411 Coral Circle, El Segundo, CA 90245-4622
Phone: (310) 597-4991
www.nanoprecision.com
NOTE: This document is for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender and destroy all copies of the document.








Industry experience preferably in an optical/photonics component environment.
Able to understand problem statements, provide conclusive data analysis and draw
conclusions.
Capable to multi-task in a fast-pace work environment
Proficient in Microsoft Office (Word, Excel, Power Point, and Project)
Ability to read, analyze and interpret detailed drawings
Knowledgeable on statistical data analysis, histograms, Cpk, Gage R&R, etc.
Ability to communicate effectively to a professional staff, in an oral, written and
presentation manner
Must be able to travel by car or plane for customer meetings, or supplier sites ~10-15% of
time.
411 Coral Circle, El Segundo, CA 90245-4622
Phone: (310) 597-4991
www.nanoprecision.com
NOTE: This document is for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender and destroy all copies of the document.
2