Document

Pandoc User’s Guide
John MacFarlane
July 02, 2015
Synopsis
pandoc [options] [input-file]…
Description
Pandoc is a Haskell library for converting from one markup format to another,
and a command-line tool that uses this library. It can read Markdown, CommonMark, and (subsets of) Textile, reStructuredText, HTML, LaTeX, MediaWiki
markup, TWiki markup, Haddock markup, OPML, Emacs Org-mode, DocBook,
txt2tags, EPUB and Word docx; and it can write plain text, Markdown, reStructuredText, XHTML, HTML 5, LaTeX (including beamer slide shows),
ConTeXt, RTF, OPML, DocBook, OpenDocument, ODT, Word docx, GNU
Texinfo, MediaWiki markup, DokuWiki markup, Haddock markup, EPUB (v2
or v3), FictionBook2, Textile, groff man pages, Emacs Org-Mode, AsciiDoc, InDesign ICML, and Slidy, Slideous, DZSlides, reveal.js or S5 HTML slide shows.
It can also produce PDF output on systems where LaTeX is installed.
Pandoc’s enhanced version of markdown includes syntax for footnotes, tables,
flexible ordered lists, definition lists, fenced code blocks, superscript, subscript,
strikeout, title blocks, automatic tables of contents, embedded LaTeX math,
citations, and markdown inside HTML block elements. (These enhancements, described below under Pandoc’s markdown, can be disabled using the
markdown_strict input or output format.)
In contrast to most existing tools for converting markdown to HTML, which use
regex substitutions, Pandoc has a modular design: it consists of a set of readers,
which parse text in a given format and produce a native representation of the
document, and a set of writers, which convert this native representation into a
target format. Thus, adding an input or output format requires only adding a
reader or writer.
1
Using pandoc
If no input-file is specified, input is read from stdin. Otherwise, the input-files
are concatenated (with a blank line between each) and used as input. Output
goes to stdout by default (though output to stdout is disabled for the odt, docx,
epub, and epub3 output formats). For output to a file, use the -o option:
pandoc -o output.html input.txt
By default, pandoc produces a document fragment, not a standalone document
with a proper header and footer. To produce a standalone document, use the
-s or --standalone flag:
pandoc -s -o output.html input.txt
For more information on how standalone documents are produced, see Templates, below.
Instead of a file, an absolute URI may be given. In this case pandoc will fetch
the content using HTTP:
pandoc -f html -t markdown http://www.fsf.org
If multiple input files are given, pandoc will concatenate them all (with blank
lines between them) before parsing. This feature is disabled for binary input
formats such as EPUB and docx.
The format of the input and output can be specified explicitly using commandline options. The input format can be specified using the -r/--read or
-f/--from options, the output format using the -w/--write or -t/--to
options. Thus, to convert hello.txt from markdown to LaTeX, you could
type:
pandoc -f markdown -t latex hello.txt
To convert hello.html from html to markdown:
pandoc -f html -t markdown hello.html
Supported output formats are listed below under the -t/--to option. Supported input formats are listed below under the -f/--from option. Note that
the rst, textile, latex, and html readers are not complete; there are some
constructs that they do not parse.
If the input or output format is not specified explicitly, pandoc will attempt
to guess it from the extensions of the input and output filenames. Thus, for
example,
2
pandoc -o hello.tex hello.txt
will convert hello.txt from markdown to LaTeX. If no output file is specified
(so that output goes to stdout), or if the output file’s extension is unknown,
the output format will default to HTML. If no input file is specified (so that
input comes from stdin), or if the input files’ extensions are unknown, the input
format will be assumed to be markdown unless explicitly specified.
Pandoc uses the UTF-8 character encoding for both input and output. If your local character encoding is not UTF-8, you should pipe input and output through
iconv:
iconv -t utf-8 input.txt | pandoc | iconv -f utf-8
Note that in some output formats (such as HTML, LaTeX, ConTeXt, RTF,
OPML, DocBook, and Texinfo), information about the character encoding is
included in the document header, which will only be included if you use the
-s/--standalone option.
Creating a PDF
Earlier versions of pandoc came with a program, markdown2pdf, that used pandoc and pdflatex to produce a PDF. This is no longer needed, since pandoc can
now produce pdf output itself. To produce a PDF, simply specify an output
file with a .pdf extension. Pandoc will create a latex file and use pdflatex (or
another engine, see --latex-engine) to convert it to PDF:
pandoc test.txt -o test.pdf
Production of a PDF requires that a LaTeX engine be installed (see
--latex-engine, below), and assumes that the following LaTeX packages are
available: amssymb, amsmath, ifxetex, ifluatex, listings (if the --listings
option is used), fancyvrb, longtable, booktabs, url, graphicx and grffile
(if the document contains images), hyperref, ulem, babel (if the lang variable
is set), fontspec (if xelatex or lualatex is used as the LaTeX engine),
xltxtra and xunicode (if xelatex is used).
hsmarkdown
A user who wants a drop-in replacement for Markdown.pl may create a symbolic
link to the pandoc executable called hsmarkdown. When invoked under the
name hsmarkdown, pandoc will behave as if invoked with -f markdown_strict
--email-obfuscation=references, and all command-line options will be
treated as regular arguments. However, this approach does not work under
Cygwin, due to problems with its simulation of symbolic links.
3
Options
General options
-f FORMAT, -r FORMAT, --from=FORMAT, --read=FORMAT
Specify input format. FORMAT can be native (native Haskell), json
(JSON version of native AST), markdown (pandoc’s extended markdown),
markdown_strict (original unextended markdown), markdown_phpextra
(PHP Markdown Extra extended markdown), markdown_github (github
extended markdown), commonmark (CommonMark markdown), textile
(Textile), rst (reStructuredText), html (HTML), docbook (DocBook),
t2t (txt2tags), docx (docx), epub (EPUB), opml (OPML), org
(Emacs Org-mode), mediawiki (MediaWiki markup), twiki (TWiki
markup), haddock (Haddock markup), or latex (LaTeX). If +lhs
is appended to markdown, rst, latex, or html, the input will be
treated as literate Haskell source: see Literate Haskell support, below.
Markdown syntax extensions can be individually enabled or
disabled by appending +EXTENSION or -EXTENSION to the format name.
So, for example, markdown_strict+footnotes+definition_lists
is strict markdown with footnotes and definition lists enabled, and
markdown-pipe_tables+hard_line_breaks is pandoc’s markdown
without pipe tables and with hard line breaks. See Pandoc’s markdown,
below, for a list of extensions and their names.
-t FORMAT, -w FORMAT, --to=FORMAT, --write=FORMAT
Specify output format. FORMAT can be native (native Haskell),
json (JSON version of native AST), plain (plain text), markdown
(pandoc’s extended markdown), markdown_strict (original unextended
markdown), markdown_phpextra (PHP Markdown extra extended markdown), markdown_github (github extended markdown), commonmark
(CommonMark markdown), rst (reStructuredText), html (XHTML
1), html5 (HTML 5), latex (LaTeX), beamer (LaTeX beamer slide
show), context (ConTeXt), man (groff man), mediawiki (MediaWiki
markup), dokuwiki (DokuWiki markup), textile (Textile), org (Emacs
Org-Mode), texinfo (GNU Texinfo), opml (OPML), docbook (DocBook),
opendocument (OpenDocument), odt (OpenOffice text document), docx
(Word docx), haddock (Haddock markup), rtf (rich text format),
epub (EPUB v2 book), epub3 (EPUB v3), fb2 (FictionBook2 e-book),
asciidoc (AsciiDoc), icml (InDesign ICML), slidy (Slidy HTML and
javascript slide show), slideous (Slideous HTML and javascript slide
show), dzslides (DZSlides HTML5 + javascript slide show), revealjs
(reveal.js HTML5 + javascript slide show), s5 (S5 HTML and javascript
slide show), or the path of a custom lua writer (see Custom writers,
below). Note that odt, epub, and epub3 output will not be directed
to stdout; an output filename must be specified using the -o/--output
option. If +lhs is appended to markdown, rst, latex, beamer, html, or
4
html5, the output will be rendered as literate Haskell source: see Literate
Haskell support, below. Markdown syntax extensions can be individually
enabled or disabled by appending +EXTENSION or -EXTENSION to the
format name, as described above under -f.
-o FILE, --output=FILE Write output to FILE instead of stdout. If FILE
is -, output will go to stdout. (Exception: if the output format is odt,
docx, epub, or epub3, output to stdout is disabled.)
--data-dir=DIRECTORY Specify the user data directory to search for pandoc data files. If this option is not specified, the default user data directory
will be used. This is
$HOME/.pandoc
in unix,
C:\Documents And Settings\USERNAME\Application Data\pandoc
in Windows XP, and
C:\Users\USERNAME\AppData\Roaming\pandoc
in Windows 7. (You can find the default user data directory on your system by looking at the output of pandoc --version.) A reference.odt,
reference.docx, default.csl, epub.css, templates, slidy, slideous,
or s5 directory placed in this directory will override pandoc’s normal defaults.
--verbose Give verbose debugging output. Currently this only has an effect
with PDF output.
-v, --version Print version.
-h, --help Show usage message.
Reader options
-R, --parse-raw Parse untranslatable HTML codes and LaTeX environments
as raw HTML or LaTeX, instead of ignoring them. Affects only HTML
and LaTeX input. Raw HTML can be printed in markdown, reStructuredText, HTML, Slidy, Slideous, DZSlides, reveal.js, and S5 output;
raw LaTeX can be printed in markdown, reStructuredText, LaTeX, and
ConTeXt output. The default is for the readers to omit untranslatable
HTML codes and LaTeX environments. (The LaTeX reader does pass
through untranslatable LaTeX commands, even if -R is not specified.)
5
-S, --smart Produce typographically correct output, converting straight
quotes to curly quotes, --- to em-dashes, -- to en-dashes, and ... to
ellipses. Nonbreaking spaces are inserted after certain abbreviations,
such as “Mr.” (Note: This option is significant only when the input
format is markdown, markdown_strict, textile or twiki. It is selected
automatically when the input format is textile or the output format is
latex or context, unless --no-tex-ligatures is used.)
--old-dashes Selects the pandoc <= 1.8.2.1 behavior for parsing smart dashes:
- before a numeral is an en-dash, and -- is an em-dash. This option is
selected automatically for textile input.
--base-header-level=NUMBER Specify the base level for headers (defaults
to 1).
--indented-code-classes=CLASSES Specify classes to use for indented
code blocks–for example, perl,numberLines or haskell. Multiple
classes may be separated by spaces or commas.
--default-image-extension=EXTENSION Specify a default extension to
use when image paths/URLs have no extension. This allows you to use the
same source for formats that require different kinds of images. Currently
this option only affects the markdown and LaTeX readers.
--filter=EXECUTABLE Specify an executable to be used as a filter transforming the Pandoc AST after the input is parsed and before the output
is written. The executable should read JSON from stdin and write JSON
to stdout. The JSON must be formatted like pandoc’s own JSON input
and output. The name of the output format will be passed to the filter as
the first argument. Hence,
pandoc --filter ./caps.py -t latex
is equivalent to
pandoc -t json | ./caps.py latex | pandoc -f json -t latex
The latter form may be useful for debugging filters.
Filters may be written in any language. Text.Pandoc.JSON exports
toJSONFilter to facilitate writing filters in Haskell. Those who would
prefer to write filters in python can use the module pandocfilters,
installable from PyPI. See http://github.com/jgm/pandocfilters for the
module and several examples. There are also pandoc filter libraries in
PHP, perl, and javascript/node.js.
Note that the EXECUTABLE will be sought in the user’s PATH, and not
in the working directory, if no directory is provided. If you want to run a
script in the working directory, preface the filename with ./.
6
-M KEY [=VAL], --metadata=KEY [:VAL] Set the metadata field KEY to
the value VAL. A value specified on the command line overrides a value
specified in the document. Values will be parsed as YAML boolean or
string values. If no value is specified, the value will be treated as Boolean
true. Like --variable, --metadata causes template variables to be set.
But unlike --variable, --metadata affects the metadata of the underlying document (which is accessible from filters and may be printed in some
output formats).
--normalize Normalize the document after reading: merge adjacent Str or
Emph elements, for example, and remove repeated Spaces.
-p, --preserve-tabs Preserve tabs instead of converting them to spaces (the
default). Note that this will only affect tabs in literal code spans and code
blocks; tabs in regular text will be treated as spaces.
--tab-stop=NUMBER Specify the number of spaces per tab (default is 4).
--track-changes=accept|reject|all Specifies what to do with insertions and
deletions produced by the MS Word “track-changes” feature. accept (the
default), inserts all insertions, and ignores all deletions. reject inserts all
deletions and ignores insertions. all puts in both insertions and deletions,
wrapped in spans with insertion and deletion classes, respectively. The
author and time of change is included. all is useful for scripting: only
accepting changes from a certain reviewer, say, or before a certain date.
This option only affects the docx reader.
--extract-media=DIR Extract images and other media contained in a docx
or epub container to the path DIR, creating it if necessary, and adjust
the images references in the document so they point to the extracted files.
This option only affects the docx and epub readers.
General writer options
-s, --standalone Produce output with an appropriate header and footer
(e.g. a standalone HTML, LaTeX, or RTF file, not a fragment). This
option is set automatically for pdf, epub, epub3, fb2, docx, and odt
output.
--template=FILE Use FILE as a custom template for the generated document.
Implies --standalone. See Templates below for a description of template
syntax. If no extension is specified, an extension corresponding to the
writer will be added, so that --template=special looks for special.html
for HTML output. If the template is not found, pandoc will search for
it in the user data directory (see --data-dir). If this option is not used,
a default template appropriate for the output format will be used (see
-D/--print-default-template).
7
-V KEY [=VAL], --variable=KEY [:VAL] Set the template variable KEY
to the value VAL when rendering the document in standalone mode. This
is generally only useful when the --template option is used to specify a
custom template, since pandoc automatically sets the variables used in
the default templates. If no VAL is specified, the key will be given the
value true.
-D FORMAT, --print-default-template=FORMAT Print the default
template for an output FORMAT. (See -t for a list of possible FORMATs.)
--print-default-data-file=FILE Print a default data file.
--no-wrap Disable text wrapping in output. By default, text is wrapped appropriately for the output format.
--columns=NUMBER Specify length of lines in characters (for text wrapping).
--toc, --table-of-contents Include an automatically generated table of contents (or, in the case of latex, context, and rst, an instruction to create
one) in the output document. This option has no effect on man, docbook,
slidy, slideous, s5, docx, or odt output.
--toc-depth=NUMBER Specify the number of section levels to include in
the table of contents. The default is 3 (which means that level 1, 2, and
3 headers will be listed in the contents).
--no-highlight Disables syntax highlighting for code blocks and inlines, even
when a language attribute is given.
--highlight-style=STYLE Specifies the coloring style to be used in
highlighted source code. Options are pygments (the default), kate,
monochrome, espresso, zenburn, haddock, and tango. For more
information on syntax highlighting in pandoc, see Syntax highlighting,
below.
-H FILE, --include-in-header=FILE Include contents of FILE, verbatim,
at the end of the header. This can be used, for example, to include special
CSS or javascript in HTML documents. This option can be used repeatedly to include multiple files in the header. They will be included in the
order specified. Implies --standalone.
-B FILE, --include-before-body=FILE Include contents of FILE, verbatim, at the beginning of the document body (e.g. after the <body> tag
in HTML, or the \begin{document} command in LaTeX). This can be
used to include navigation bars or banners in HTML documents. This option can be used repeatedly to include multiple files. They will be included
in the order specified. Implies --standalone.
8
-A FILE, --include-after-body=FILE Include contents of FILE, verbatim,
at the end of the document body (before the </body> tag in HTML, or
the \end{document} command in LaTeX). This option can be be used
repeatedly to include multiple files. They will be included in the order
specified. Implies --standalone.
Options affecting specific writers
--self-contained Produce a standalone HTML file with no external dependencies, using data: URIs to incorporate the contents of linked
scripts, stylesheets, images, and videos. The resulting file should be
“self-contained,” in the sense that it needs no external files and no net
access to be displayed properly by a browser. This option works only with
HTML output formats, including html, html5, html+lhs, html5+lhs,
s5, slidy, slideous, dzslides, and revealjs. Scripts, images, and
stylesheets at absolute URLs will be downloaded; those at relative URLs
will be sought relative to the working directory (if the first source file
is local) or relative to the base URL (if the first source file is remote).
--self-contained does not work with --mathjax.
--offline Deprecated synonym for --self-contained.
-5, --html5 Produce HTML5 instead of HTML4. This option has no effect
for writers other than html. (Deprecated: Use the html5 output format
instead.)
--html-q-tags Use <q> tags for quotes in HTML.
--ascii Use only ascii characters in output. Currently supported only for
HTML output (which uses numerical entities instead of UTF-8 when this
option is selected).
--reference-links Use reference-style links, rather than inline links, in writing markdown or reStructuredText. By default inline links are used.
--atx-headers Use ATX style headers in markdown and asciidoc output. The
default is to use setext-style headers for levels 1-2, and then ATX headers.
--chapters Treat top-level headers as chapters in LaTeX, ConTeXt, and DocBook output. When the LaTeX template uses the report, book, or memoir class, this option is implied. If beamer is the output format, top-level
headers will become \part{..}.
-N, --number-sections Number section headings in LaTeX, ConTeXt, HTML,
or EPUB output. By default, sections are not numbered. Sections with
class unnumbered will never be numbered, even if --number-sections is
specified.
9
--number-offset=NUMBER[,NUMBER,…] Offset for section headings in
HTML output (ignored in other output formats). The first number is
added to the section number for top-level headers, the second for secondlevel headers, and so on. So, for example, if you want the first top-level
header in your document to be numbered “6”, specify --number-offset=5.
If your document starts with a level-2 header which you want to be numbered “1.5”, specify --number-offset=1,4. Offsets are 0 by default. Implies --number-sections.
--no-tex-ligatures Do not convert quotation marks, apostrophes, and
dashes to the TeX ligatures when writing LaTeX or ConTeXt. Instead,
just use literal unicode characters. This is needed for using advanced
OpenType features with XeLaTeX and LuaLaTeX. Note: normally
--smart is selected automatically for LaTeX and ConTeXt output, but
it must be specified explicitly if --no-tex-ligatures is selected. If you
use literal curly quotes, dashes, and ellipses in your source, then you may
want to use --no-tex-ligatures without --smart.
--listings Use listings package for LaTeX code blocks
-i, --incremental Make list items in slide shows display incrementally (one
by one). The default is for lists to be displayed all at once.
--slide-level=NUMBER Specifies that headers with the specified level create slides (for beamer, s5, slidy, slideous, dzslides). Headers above
this level in the hierarchy are used to divide the slide show into sections;
headers below this level create subheads within a slide. The default is to
set the slide level based on the contents of the document; see Structuring
the slide show, below.
--section-divs Wrap sections in <div> tags (or <section> tags in HTML5),
and attach identifiers to the enclosing <div> (or <section>) rather than
the header itself. See Section identifiers, below.
--email-obfuscation=none|javascript|references Specify a method for obfuscating mailto: links in HTML documents. none leaves mailto: links
as they are. javascript obfuscates them using javascript. references
obfuscates them by printing their letters as decimal or hexadecimal character references.
--id-prefix=STRING Specify a prefix to be added to all automatically generated identifiers in HTML and DocBook output, and to footnote numbers
in markdown output. This is useful for preventing duplicate identifiers
when generating fragments to be included in other pages.
-T STRING, --title-prefix=STRING Specify STRING as a prefix at the
beginning of the title that appears in the HTML header (but not in
the title as it appears at the beginning of the HTML body). Implies
--standalone.
10
-c URL, --css=URL Link to a CSS style sheet. This option can be be used
repeatedly to include multiple files. They will be included in the order
specified.
--reference-odt=FILE Use the specified file as a style reference in producing
an ODT. For best results, the reference ODT should be a modified version
of an ODT produced using pandoc. The contents of the reference ODT are
ignored, but its stylesheets are used in the new ODT. If no reference ODT
is specified on the command line, pandoc will look for a file reference.odt
in the user data directory (see --data-dir). If this is not found either,
sensible defaults will be used.
--reference-docx=FILE Use the specified file as a style reference in producing a docx file. For best results, the reference docx should be a modified
version of a docx file produced using pandoc. The contents of the reference
docx are ignored, but its stylesheets and document properties (including
margins, page size, header, and footer) are used in the new docx. If no
reference docx is specified on the command line, pandoc will look for a
file reference.docx in the user data directory (see --data-dir). If this
is not found either, sensible defaults will be used. The following styles are
used by pandoc: [paragraph] Normal, Compact, Title, Subtitle, Authors,
Date, Abstract, Heading 1, Heading 2, Heading 3, Heading 4, Heading 5,
Block Text, Definition Term, Definition, Bibliography, Body Text, Table
Caption, Image Caption, Figure, FigureWithCaption; [character] Default
Paragraph Font, Body Text Char, Verbatim Char, Footnote Reference,
Hyperlink.
--epub-stylesheet=FILE Use the specified CSS file to style the EPUB. If no
stylesheet is specified, pandoc will look for a file epub.css in the user data
directory (see --data-dir). If it is not found there, sensible defaults will
be used.
--epub-cover-image=FILE Use the specified image as the EPUB cover.
It is recommended that the image be less than 1000px in width and
height. Note that in a markdown source document you can also specify
cover-image in a YAML metadata block (see EPUB Metadata, below).
--epub-metadata=FILE Look in the specified XML file for metadata for the
EPUB. The file should contain a series of Dublin Core elements, as documented at http://dublincore.org/documents/dces/. For example:
<dc:rights>Creative Commons</dc:rights>
<dc:language>es-AR</dc:language>
By default, pandoc will include the following metadata elements:
<dc:title> (from the document title), <dc:creator> (from the document authors), <dc:date> (from the document date, which should be
11
in ISO 8601 format), <dc:language> (from the lang variable, or, if is
not set, the locale), and <dc:identifier id="BookId"> (a randomly
generated UUID). Any of these may be overridden by elements in the
metadata file.
Note: if the source document is markdown, a YAML metadata block in
the document can be used instead. See below under EPUB Metadata.
--epub-embed-font=FILE Embed the specified font in the EPUB. This option
can be repeated to embed multiple fonts. Wildcards can also be used:
for example, DejaVuSans-*.ttf. However, if you use wildcards on the
command line, be sure to escape them or put the whole filename in single
quotes, to prevent them from being interpreted by the shell. To use the
embedded fonts, you will need to add declarations like the following to
your CSS (see --epub-stylesheet):
@font-face {
font-family: DejaVuSans;
font-style: normal;
font-weight: normal;
src:url("DejaVuSans-Regular.ttf");
}
@font-face {
font-family: DejaVuSans;
font-style: normal;
font-weight: bold;
src:url("DejaVuSans-Bold.ttf");
}
@font-face {
font-family: DejaVuSans;
font-style: italic;
font-weight: normal;
src:url("DejaVuSans-Oblique.ttf");
}
@font-face {
font-family: DejaVuSans;
font-style: italic;
font-weight: bold;
src:url("DejaVuSans-BoldOblique.ttf");
}
body { font-family: "DejaVuSans"; }
--epub-chapter-level=NUMBER Specify the header level at which to split
the EPUB into separate “chapter” files. The default is to split into chapters at level 1 headers. This option only affects the internal composition
of the EPUB, not the way chapters and sections are displayed to users.
Some readers may be slow if the chapter files are too large, so for large
12
documents with few level 1 headers, one might want to use a chapter level
of 2 or 3.
--latex-engine=pdflatex|lualatex|xelatex Use the specified LaTeX engine
when producing PDF output. The default is pdflatex. If the engine is
not in your PATH, the full path of the engine may be specified here.
--latex-engine-opt=STRING Use the given string as a command-line argument to the latex-engine. If used multiple times, the arguments are
provided with spaces between them. Note that no check for duplicate
options is done.
Citation rendering
--bibliography=FILE Set the bibliography field in the document’s metadata to FILE, overriding any value set in the metadata, and process
citations using pandoc-citeproc. (This is equivalent to --metadata
bibliography=FILE --filter pandoc-citeproc.) If --natbib or
--biblatex is also supplied, pandoc-citeproc is not used, making
this equivalent to --metadata bibliography=FILE. If you supply this
argument multiple times, each FILE will be added to bibliography.
--csl=FILE Set the csl field in the document’s metadata to FILE, overriding any value set in the metadata. (This is equivalent to --metadata
csl=FILE.) This option is only relevant with pandoc-citeproc.
--citation-abbreviations=FILE Set the citation-abbreviations field
in the document’s metadata to FILE, overriding any value set in the metadata. (This is equivalent to --metadata citation-abbreviations=FILE.)
This option is only relevant with pandoc-citeproc.
--natbib Use natbib for citations in LaTeX output. This option is not for use
with the pandoc-citeproc filter or with PDF output. It is intended for
use in producing a LaTeX file that can be processed with pdflatex and
bibtex.
--biblatex Use biblatex for citations in LaTeX output. This option is not for
use with the pandoc-citeproc filter or with PDF output. It is intended
for use in producing a LaTeX file that can be processed with pdflatex and
bibtex or biber.
Math rendering in HTML
-m [URL], --latexmathml[=URL] Use the LaTeXMathML script to display
embedded TeX math in HTML output. To insert a link to a local copy
of the LaTeXMathML.js script, provide a URL. If no URL is provided,
13
the contents of the script will be inserted directly into the HTML header,
preserving portability at the price of efficiency. If you plan to use math
on several pages, it is much better to link to a copy of the script, so it can
be cached.
--mathml[=URL] Convert TeX math to MathML (in docbook as well as html
and html5). In standalone html output, a small javascript (or a link to
such a script if a URL is supplied) will be inserted that allows the MathML
to be viewed on some browsers.
--jsmath[=URL] Use jsMath to display embedded TeX math in HTML
output.
The URL should point to the jsMath load script (e.g.
jsMath/easy/load.js); if provided, it will be linked to in the header of
standalone HTML documents. If a URL is not provided, no link to the
jsMath load script will be inserted; it is then up to the author to provide
such a link in the HTML template.
--mathjax[=URL] Use MathJax to display embedded TeX math in HTML
output. The URL should point to the MathJax.js load script. If a URL
is not provided, a link to the MathJax CDN will be inserted.
--gladtex Enclose TeX math in <eq> tags in HTML output. These can then be
processed by gladTeX to produce links to images of the typeset formulas.
--mimetex[=URL] Render TeX math using the mimeTeX CGI script. If URL
is not specified, it is assumed that the script is at /cgi-bin/mimetex.cgi.
--webtex[=URL] Render TeX formulas using an external script that converts
TeX formulas to images. The formula will be concatenated with the URL
provided. If URL is not specified, the Google Chart API will be used.
--katex[=URL] Use KaTeX to display embedded TeX math in HTML output.
The URL should point to the katex.js load script. If a URL is not
provided, a link to the KaTeX CDN will be inserted.
--katex-stylesheet=URL The URL should point to the katex.css
stylesheet. If this option is not specified, a link to the KaTeX CDN will
be inserted. Note that this option does not imply --katex.
Options for wrapper scripts
--dump-args Print information about command-line arguments to stdout, then
exit. This option is intended primarily for use in wrapper scripts. The
first line of output contains the name of the output file specified with the
-o option, or - (for stdout) if no output file was specified. The remaining
lines contain the command-line arguments, one per line, in the order they
appear. These do not include regular Pandoc options and their arguments,
but do include any options appearing after a -- separator at the end of
the line.
14
--ignore-args Ignore command-line arguments (for use in wrapper scripts).
Regular Pandoc options are not ignored. Thus, for example,
pandoc --ignore-args -o foo.html -s foo.txt -- -e latin1
is equivalent to
pandoc -o foo.html -s
Templates
When the -s/--standalone option is used, pandoc uses a template to add
header and footer material that is needed for a self-standing document. To see
the default template that is used, just type
pandoc -D FORMAT
where FORMAT is the name of the output format. A custom template can
be specified using the --template option. You can also override the system default templates for a given output format FORMAT by putting a file
templates/default.FORMAT in the user data directory (see --data-dir,
above). Exceptions: For odt output, customize the default.opendocument
template. For pdf output, customize the default.latex template.
Templates may contain variables. Variable names are sequences of alphanumerics, -, and _, starting with a letter. A variable name surrounded by $ signs will
be replaced by its value. For example, the string $title$ in
<title>$title$</title>
will be replaced by the document title.
To write a literal $ in a template, use $$.
Some variables are set automatically by pandoc. These vary somewhat depending on the output format, but include metadata fields (such as title, author,
and date) as well as the following:
header-includes contents specified by -H/--include-in-header (may have
multiple values)
toc non-null value if --toc/--table-of-contents was specified
include-before contents specified by -B/--include-before-body (may have
multiple values)
15
include-after contents specified by -A/--include-after-body (may have
multiple values)
body body of document
lang language code for HTML or LaTeX documents
slidy-url base URL for Slidy documents (defaults to http://www.w3.org/Talks/Tools/Slidy2)
slideous-url base URL for Slideous documents (defaults to slideous)
s5-url base URL for S5 documents (defaults to s5/default)
revealjs-url base URL for reveal.js documents (defaults to reveal.js)
theme reveal.js or LaTeX beamer theme
transition reveal.js transition
fontsize font size (10pt, 11pt, 12pt) for LaTeX documents
documentclass document class for LaTeX documents
classoption option for LaTeX documentclass, e.g. oneside; may be repeated
for multiple options
geometry options for LaTeX geometry class, e.g. margin=1in; may be repeated
for multiple options
linestretch adjusts line spacing (requires the setspace package)
fontfamily font package to use for LaTeX documents (with pdflatex): TeXLive
has bookman (Bookman), utopia or fourier (Utopia), fouriernc (New
Century Schoolbook), times or txfonts (Times), mathpazo or pxfonts
or mathpple (Palatino), libertine (Linux Libertine), arev (Arev Sans),
and the default lmodern, among others.
mainfont, sansfont, monofont, mathfont, CJKmainfont fonts for LaTeX
documents (works only with xelatex and lualatex).
Note that if
CJKmainfont is used, the xeCJK package must be available.
colortheme colortheme for LaTeX beamer documents
fonttheme fonttheme for LaTeX beamer documents
linkcolor color for internal links in LaTeX documents (red, green, magenta,
cyan, blue, black)
toccolor color for links in table of contents in LaTeX documents
urlcolor color for external links in LaTeX documents
citecolor color for citation links in LaTeX documents
links-as-notes causes links to be printed as footnotes in LaTeX documents
toc include table of contents in LaTeX documents
toc-depth level of section to include in table of contents in LaTeX documents
toc-title title of table of contents (works only with EPUB and docx)
lof include list of figures in LaTeX documents
lot include list of tables in LaTeX documents
bibliography bibliography to use for resolving references
biblio-style bibliography style in LaTeX, when used with --natbib
section section number in man pages
header header in man pages
footer footer in man pages
Variables may be set at the command line using the -V/--variable option.
Variables set in this way override metadata fields with the same name.
16
Templates may contain conditionals. The syntax is as follows:
$if(variable)$
X
$else$
Y
$endif$
This will include X in the template if variable has a non-null value; otherwise
it will include Y. X and Y are placeholders for any valid template text, and may
include interpolated variables or other conditionals. The $else$ section may
be omitted.
When variables can have multiple values (for example, author in a multi-author
document), you can use the $for$ keyword:
$for(author)$
<meta name="author" content="$author$" />
$endfor$
You can optionally specify a separator to be used between consecutive items:
$for(author)$$author$$sep$, $endfor$
A dot can be used to select a field of a variable that takes an object as its value.
So, for example:
$author.name$ ($author.affiliation$)
If you use custom templates, you may need to revise them as pandoc changes.
We recommend tracking the changes in the default templates, and modifying
your custom templates accordingly. An easy way to do this is to fork the pandoctemplates repository (http://github.com/jgm/pandoc-templates) and merge in
changes after each pandoc release.
Pandoc’s markdown
Pandoc understands an extended and slightly revised version of John Gruber’s
markdown syntax. This document explains the syntax, noting differences from
standard markdown. Except where noted, these differences can be suppressed
by using the markdown_strict format instead of markdown. An extensions can
be enabled by adding +EXTENSION to the format name and disabled by adding
-EXTENSION. For example, markdown_strict+footnotes is strict markdown
with footnotes enabled, while markdown-footnotes-pipe_tables is pandoc’s
markdown without footnotes or pipe tables.
17
Philosophy
Markdown is designed to be easy to write, and, even more importantly, easy to
read:
A Markdown-formatted document should be publishable as-is, as
plain text, without looking like it’s been marked up with tags or
formatting instructions. – John Gruber
This principle has guided pandoc’s decisions in finding syntax for tables, footnotes, and other extensions.
There is, however, one respect in which pandoc’s aims are different from the
original aims of markdown. Whereas markdown was originally designed with
HTML generation in mind, pandoc is designed for multiple output formats.
Thus, while pandoc allows the embedding of raw HTML, it discourages it, and
provides other, non-HTMLish ways of representing important document elements like definition lists, tables, mathematics, and footnotes.
Paragraphs
A paragraph is one or more lines of text followed by one or more blank lines.
Newlines are treated as spaces, so you can reflow your paragraphs as you like.
If you need a hard line break, put two or more spaces at the end of a line.
Extension: escaped_line_breaks
A backslash followed by a newline is also a hard line break. Note: in multiline
and grid table cells, this is the only way to create a hard line break, since trailing
spaces in the cells are ignored.
Headers
There are two kinds of headers, Setext and atx.
Setext-style headers
A setext-style header is a line of text “underlined” with a row of = signs (for a
level one header) or - signs (for a level two header):
A level-one header
==================
18
A level-two header
-----------------The header text can contain inline formatting, such as emphasis (see Inline
formatting, below).
Atx-style headers
An Atx-style header consists of one to six # signs and a line of text, optionally
followed by any number of # signs. The number of # signs at the beginning of
the line is the header level:
## A level-two header
### A level-three header ###
As with setext-style headers, the header text can contain formatting:
# A level-one header with a [link](/url) and *emphasis*
Extension: blank_before_header
Standard markdown syntax does not require a blank line before a header. Pandoc does require this (except, of course, at the beginning of the document).
The reason for the requirement is that it is all too easy for a # to end up at the
beginning of a line by accident (perhaps through line wrapping). Consider, for
example:
I like several of their flavors of ice cream:
#22, for example, and #5.
Header identifiers in HTML, LaTeX, and ConTeXt
Extension: header_attributes
Headers can be assigned attributes using this syntax at the end of the line
containing the header text:
{#identifier .class .class key=value key=value}
Thus, for example, the following headers will all be assigned the identifier foo:
19
# My header {#foo}
## My header ##
My other header
---------------
{#foo}
{#foo}
(This syntax is compatible with PHP Markdown Extra.)
Note that although this syntax allows assignment of classes and key/value attributes, writers generally don’t use all of this information. Identifiers, classes,
and key/value attributes are used in HTML and HTML-based formats such as
EPUB and slidy. Identifiers are used for labels and link anchors in the LaTeX,
ConTeXt, Textile, and AsciiDoc writers.
Headers with the class unnumbered will not be numbered, even if
--number-sections is specified. A single hyphen (-) in an attribute context
is equivalent to .unnumbered, and preferable in non-English documents. So,
# My header {-}
is just the same as
# My header {.unnumbered}
Extension: auto_identifiers
A header without an explicitly specified identifier will be automatically assigned
a unique identifier based on the header text. To derive the identifier from the
header text,
•
•
•
•
•
•
Remove all formatting, links, etc.
Remove all footnotes.
Remove all punctuation, except underscores, hyphens, and periods.
Replace all spaces and newlines with hyphens.
Convert all alphabetic characters to lowercase.
Remove everything up to the first letter (identifiers may not begin with a
number or punctuation mark).
• If nothing is left after this, use the identifier section.
Thus, for example,
Header
Identifier
Header identifiers in HTML
header-identifiers-in-html
20
Header
Identifier
Dogs?–in my house?
HTML, S5, or RTF?
3. Applications
33
dogs--in-my-house
html-s5-or-rtf
applications
section
These rules should, in most cases, allow one to determine the identifier from the
header text. The exception is when several headers have the same text; in this
case, the first will get an identifier as described above; the second will get the
same identifier with -1 appended; the third with -2; and so on.
These identifiers are used to provide link targets in the table of contents generated by the --toc|--table-of-contents option. They also make it easy to
provide links from one section of a document to another. A link to this section,
for example, might look like this:
See the section on
[header identifiers](#header-identifiers-in-html-latex-and-context).
Note, however, that this method of providing links to sections works only in
HTML, LaTeX, and ConTeXt formats.
If the --section-divs option is specified, then each section will be wrapped in a
div (or a section, if --html5 was specified), and the identifier will be attached
to the enclosing <div> (or <section>) tag rather than the header itself. This
allows entire sections to be manipulated using javascript or treated differently
in CSS.
Extension: implicit_header_references
Pandoc behaves as if reference links have been defined for each header. So,
instead of
[header identifiers](#header-identifiers-in-html)
you can simply write
[header identifiers]
or
[header identifiers][]
21
or
[the section on header identifiers][header identifiers]
If there are multiple headers with identical text, the corresponding reference
will link to the first one only, and you will need to use explicit links to link to
the others, as described above.
Like regular reference links, these references are case-insensitive.
Explicit link reference definitions always take priority over implicit header references. So, in the following example, the link will point to bar, not to #foo:
# Foo
[foo]: bar
See [foo]
Block quotations
Markdown uses email conventions for quoting blocks of text. A block quotation
is one or more paragraphs or other block elements (such as lists or headers),
with each line preceded by a > character and a space. (The > need not start at
the left margin, but it should not be indented more than three spaces.)
>
>
>
>
>
This is a block quote. This
paragraph has two lines.
1. This is a list inside a block quote.
2. Second item.
A “lazy” form, which requires the > character only on the first line of each block,
is also allowed:
> This is a block quote. This
paragraph has two lines.
> 1. This is a list inside a block quote.
2. Second item.
Among the block elements that can be contained in a block quote are other
block quotes. That is, block quotes can be nested:
> This is a block quote.
>
> > A block quote within a block quote.
22
Extension: blank_before_blockquote
Standard markdown syntax does not require a blank line before a block quote.
Pandoc does require this (except, of course, at the beginning of the document).
The reason for the requirement is that it is all too easy for a > to end up at the
beginning of a line by accident (perhaps through line wrapping). So, unless the
markdown_strict format is used, the following does not produce a nested block
quote in pandoc:
> This is a block quote.
>> Nested.
Verbatim (code) blocks
Indented code blocks
A block of text indented four spaces (or one tab) is treated as verbatim text:
that is, special characters do not trigger special formatting, and all spaces and
line breaks are preserved. For example,
if (a > 3) {
moveShip(5 * gravity, DOWN);
}
The initial (four space or one tab) indentation is not considered part of the
verbatim text, and is removed in the output.
Note: blank lines in the verbatim text need not begin with four spaces.
Fenced code blocks
Extension: fenced_code_blocks
In addition to standard indented code blocks, Pandoc supports fenced code
blocks. These begin with a row of three or more tildes (~) and end with a row
of tildes that must be at least as long as the starting row. Everything between
these lines is treated as code. No indentation is necessary:
~~~~~~~
if (a > 3) {
moveShip(5 * gravity, DOWN);
}
~~~~~~~
23
Like regular code blocks, fenced code blocks must be separated from surrounding
text by blank lines.
If the code itself contains a row of tildes or backticks, just use a longer row of
tildes or backticks at the start and end:
~~~~~~~~~~~~~~~~
~~~~~~~~~~
code including tildes
~~~~~~~~~~
~~~~~~~~~~~~~~~~
Extension: backtick_code_blocks
Same as fenced_code_blocks, but uses backticks (`) instead of tildes (~).
Extension: fenced_code_attributes
Optionally, you may attach attributes to fenced or backtick code block using
this syntax:
~~~~ {#mycode .haskell .numberLines startFrom="100"}
qsort []
= []
qsort (x:xs) = qsort (filter (< x) xs) ++ [x] ++
qsort (filter (>= x) xs)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here mycode is an identifier, haskell and numberLines are classes, and
startFrom is an attribute with value 100. Some output formats can use this
information to do syntax highlighting. Currently, the only output formats
that uses this information are HTML and LaTeX. If highlighting is supported
for your output format and language, then the code block above will appear
highlighted, with numbered lines. (To see which languages are supported, do
pandoc --version.) Otherwise, the code block above will appear as follows:
<pre id="mycode" class="haskell numberLines" startFrom="100">
<code>
...
</code>
</pre>
A shortcut form can also be used for specifying the language of the code block:
```haskell
qsort [] = []
```
24
This is equivalent to:
``` {.haskell}
qsort [] = []
```
If the fenced_code_attributes extension is disabled, but input contains class
attribute(s) for the codeblock, the first class attribute will be printed after the
opening fence as a bare word.
To prevent all highlighting, use the --no-highlight flag. To set the highlighting style, use --highlight-style. For more information on highlighting, see
Syntax highlighting, below.
Line blocks
Extension: line_blocks
A line block is a sequence of lines beginning with a vertical bar (|) followed by a
space. The division into lines will be preserved in the output, as will any leading
spaces; otherwise, the lines will be formatted as markdown. This is useful for
verse and addresses:
| The limerick packs laughs anatomical
| In space that is quite economical.
|
But the good ones I've seen
|
So seldom are clean
| And the clean ones so seldom are comical
| 200 Main St.
| Berkeley, CA 94718
The lines can be hard-wrapped if needed, but the continuation line must begin
with a space.
| The Right Honorable Most Venerable and Righteous Samuel L.
Constable, Jr.
| 200 Main St.
| Berkeley, CA 94718
This syntax is borrowed from reStructuredText.
25
Lists
Bullet lists
A bullet list is a list of bulleted list items. A bulleted list item begins with a
bullet (*, +, or -). Here is a simple example:
* one
* two
* three
This will produce a “compact” list. If you want a “loose” list, in which each
item is formatted as a paragraph, put spaces between the items:
* one
* two
* three
The bullets need not be flush with the left margin; they may be indented one,
two, or three spaces. The bullet must be followed by whitespace.
List items look best if subsequent lines are flush with the first line (after the
bullet):
* here is my first
list item.
* and my second.
But markdown also allows a “lazy” format:
* here is my first
list item.
* and my second.
The four-space rule
A list item may contain multiple paragraphs and other block-level content. However, subsequent paragraphs must be preceded by a blank line and indented four
spaces or a tab. The list will look better if the first paragraph is aligned with
the rest:
26
* First paragraph.
Continued.
* Second paragraph. With a code block, which must be indented
eight spaces:
{ code }
List items may include other lists. In this case the preceding blank line is
optional. The nested list must be indented four spaces or one tab:
* fruits
+ apples
- macintosh
- red delicious
+ pears
+ peaches
* vegetables
+ broccoli
+ chard
As noted above, markdown allows you to write list items “lazily,” instead of
indenting continuation lines. However, if there are multiple paragraphs or other
blocks in a list item, the first line of each must be indented.
+ A lazy, lazy, list
item.
+ Another one; this looks
bad but is legal.
Second paragraph of second
list item.
Note: Although the four-space rule for continuation paragraphs comes from
the official markdown syntax guide, the reference implementation, Markdown.pl,
does not follow it. So pandoc will give different results than Markdown.pl when
authors have indented continuation paragraphs fewer than four spaces.
The markdown syntax guide is not explicit whether the four-space rule applies
to all block-level content in a list item; it only mentions paragraphs and code
blocks. But it implies that the rule applies to all block-level content (including
nested lists), and pandoc interprets it that way.
27
Ordered lists
Ordered lists work just like bulleted lists, except that the items begin with
enumerators rather than bullets.
In standard markdown, enumerators are decimal numbers followed by a period
and a space. The numbers themselves are ignored, so there is no difference
between this list:
1.
2.
3.
one
two
three
and this one:
5.
7.
1.
one
two
three
Extension: fancy_lists
Unlike standard markdown, Pandoc allows ordered list items to be marked
with uppercase and lowercase letters and roman numerals, in addition to arabic
numerals. List markers may be enclosed in parentheses or followed by a single
right-parentheses or period. They must be separated from the text that follows
by at least one space, and, if the list marker is a capital letter with a period, by
at least two spaces.1
The fancy_lists extension also allows ‘#’ to be used as an ordered list marker
in place of a numeral:
#. one
#. two
1 The
point of this rule is to ensure that normal paragraphs starting with people’s initials,
like
B. Russell was an English philosopher.
do not get treated as list items.
This rule will not prevent
(C) 2007 Joe Smith
from being interpreted as a list item. In this case, a backslash escape can be used:
(C\) 2007 Joe Smith
28
Extension: startnum
Pandoc also pays attention to the type of list marker used, and to the starting
number, and both of these are preserved where possible in the output format.
Thus, the following yields a list with numbers followed by a single parenthesis,
starting with 9, and a sublist with lowercase roman numerals:
9)
10)
11)
Ninth
Tenth
Eleventh
i. subone
ii. subtwo
iii. subthree
Pandoc will start a new list each time a different type of list marker is used. So,
the following will create three lists:
(2)
(5)
1.
*
Two
Three
Four
Five
If default list markers are desired, use #.:
#.
#.
#.
one
two
three
Definition lists
Extension: definition_lists
Pandoc supports definition lists, using the syntax of PHP Markdown Extra with
some extensions.2
Term 1
:
Definition 1
Term 2 with *inline markup*
:
Definition 2
2I
have been influenced by the suggestions of David Wheeler.
29
{ some code, part of Definition 2 }
Third paragraph of definition 2.
Each term must fit on one line, which may optionally be followed by a blank
line, and must be followed by one or more definitions. A definition begins with
a colon or tilde, which may be indented one or two spaces.
A term may have multiple definitions, and each definition may consist of one
or more block elements (paragraph, code block, list, etc.), each indented four
spaces or one tab stop. The body of the definition (including the first line, aside
from the colon or tilde) should be indented four spaces. However, as with other
markdown lists, you can “lazily” omit indentation except at the beginning of a
paragraph or other block element:
Term 1
:
Definition
with lazy continuation.
Second paragraph of the definition.
If you leave space before the definition (as in the example above), the text of
the definition will be treated as a paragraph. In some output formats, this
will mean greater spacing between term/definition pairs. For a more compact
definition list, omit the space before the definition:
Term 1
~ Definition 1
Term 2
~ Definition 2a
~ Definition 2b
Note that space between items in a definition list is required. (A variant that
loosens this requirement, but disallows “lazy” hard wrapping, can be activated
with compact_definition_lists: see Non-pandoc extensions, below.)
Numbered example lists
Extension: example_lists
The special list marker @ can be used for sequentially numbered examples. The
first list item with a @ marker will be numbered ‘1’, the next ‘2’, and so on,
throughout the document. The numbered examples need not occur in a single
list; each new list using @ will take up where the last stopped. So, for example:
30
(@)
(@)
My first example will be numbered (1).
My second example will be numbered (2).
Explanation of examples.
(@)
My third example will be numbered (3).
Numbered examples can be labeled and referred to elsewhere in the document:
(@good)
This is a good example.
As (@good) illustrates, ...
The label can be any string of alphanumeric characters, underscores, or hyphens.
Compact and loose lists
Pandoc behaves differently from Markdown.pl on some “edge cases” involving
lists. Consider this source:
+
+
First
Second:
Fee
Fie
Foe
+
Third
Pandoc transforms this into a “compact list” (with no <p> tags around “First”,
“Second”, or “Third”), while markdown puts <p> tags around “Second” and
“Third” (but not “First”), because of the blank space around “Third”. Pandoc
follows a simple rule: if the text is followed by a blank line, it is treated as
a paragraph. Since “Second” is followed by a list, and not a blank line, it
isn’t treated as a paragraph. The fact that the list is followed by a blank line
is irrelevant. (Note: Pandoc works this way even when the markdown_strict
format is specified. This behavior is consistent with the official markdown syntax
description, even though it is different from that of Markdown.pl.)
Ending a list
What if you want to put an indented code block after a list?
31
-
item one
item two
{ my code block }
Trouble! Here pandoc (like other markdown implementations) will treat { my
code block } as the second paragraph of item two, and not as a code block.
To “cut off” the list after item two, you can insert some non-indented content,
like an HTML comment, which won’t produce visible output in any format:
-
item one
item two
<!-- end of list -->
{ my code block }
You can use the same trick if you want two consecutive lists instead of one big
list:
1.
2.
3.
one
two
three
<!-- -->
1.
2.
3.
uno
dos
tres
Horizontal rules
A line containing a row of three or more *, -, or _ characters (optionally separated by spaces) produces a horizontal rule:
*
*
*
*
---------------
Tables
Four kinds of tables may be used. The first three kinds presuppose the use of
a fixed-width font, such as Courier. The fourth kind can be used with proportionally spaced fonts, as it does not require lining up columns.
32
Extension: table_captions
A caption may optionally be provided with all 4 kinds of tables (as illustrated
in the examples below). A caption is a paragraph beginning with the string
Table: (or just :), which will be stripped off. It may appear either before or
after the table.
Extension: simple_tables
Simple tables look like this:
Right
------12
123
1
Table:
Left
Center
------ ---------12
12
123
123
1
1
Default
------12
123
1
Demonstration of simple table syntax.
The headers and table rows must each fit on one line. Column alignments are
determined by the position of the header text relative to the dashed line below
it:3
• If the dashed line is flush with the header text on the right side but extends
beyond it on the left, the column is right-aligned.
• If the dashed line is flush with the header text on the left side but extends
beyond it on the right, the column is left-aligned.
• If the dashed line extends beyond the header text on both sides, the column
is centered.
• If the dashed line is flush with the header text on both sides, the default
alignment is used (in most cases, this will be left).
The table must end with a blank line, or a line of dashes followed by a blank
line.
The column headers may be omitted, provided a dashed line is used to end the
table. For example:
------12
123
1
------3 This
------ ---------12
12
123
123
1
1
------ ----------
------12
123
1
-------
scheme is due to Michel Fortin, who proposed it on the Markdown discussion list.
33
When headers are omitted, column alignments are determined on the basis of
the first line of the table body. So, in the tables above, the columns would be
right, left, center, and right aligned, respectively.
Extension: multiline_tables
Multiline tables allow headers and table rows to span multiple lines of text (but
cells that span multiple columns or rows of the table are not supported). Here
is an example:
------------------------------------------------------------Centered
Default
Right Left
Header
Aligned
Aligned Aligned
----------- ------- --------------- ------------------------First
row
12.0 Example of a row that
spans multiple lines.
Second
row
5.0 Here's another one. Note
the blank line between
rows.
------------------------------------------------------------Table: Here's the caption. It, too, may span
multiple lines.
These work like simple tables, but with the following differences:
• They must begin with a row of dashes, before the header text (unless the
headers are omitted).
• They must end with a row of dashes, then a blank line.
• The rows must be separated by blank lines.
In multiline tables, the table parser pays attention to the widths of the columns,
and the writers try to reproduce these relative widths in the output. So, if you
find that one of the columns is too narrow in the output, try widening it in the
markdown source.
Headers may be omitted in multiline tables as well as simple tables:
----------- ------- --------------- ------------------------First
row
12.0 Example of a row that
spans multiple lines.
Second
row
5.0 Here's another one. Note
the blank line between
34
rows.
----------- ------- --------------- ------------------------: Here's a multiline table without headers.
It is possible for a multiline table to have just one row, but the row should be
followed by a blank line (and then the row of dashes that ends the table), or
the table may be interpreted as a simple table.
Extension: grid_tables
Grid tables look like this:
: Sample grid table.
+---------------+---------------+--------------------+
| Fruit
| Price
| Advantages
|
+===============+===============+====================+
| Bananas
| $1.34
| - built-in wrapper |
|
|
| - bright color
|
+---------------+---------------+--------------------+
| Oranges
| $2.10
| - cures scurvy
|
|
|
| - tasty
|
+---------------+---------------+--------------------+
The row of =s separates the header from the table body, and can be omitted for
a headerless table. The cells of grid tables may contain arbitrary block elements
(multiple paragraphs, code blocks, lists, etc.). Alignments are not supported,
nor are cells that span multiple columns or rows. Grid tables can be created
easily using Emacs table mode.
Extension: pipe_tables
Pipe tables look like this:
| Right | Left | Default | Center |
|------:|:-----|---------|:------:|
|
12 | 12 |
12
|
12 |
| 123 | 123 |
123
|
123 |
|
1 |
1 |
1
|
1 |
: Demonstration of pipe table syntax.
35
The syntax is the same as in PHP markdown extra. The beginning and ending
pipe characters are optional, but pipes are required between all columns. The
colons indicate column alignment as shown. The header cannot be omitted. To
simulate a headerless table, include a header with blank cells.
Since the pipes indicate column boundaries, columns need not be vertically
aligned, as they are in the above example. So, this is a perfectly legal (though
ugly) pipe table:
fruit| price
-----|-----:
apple|2.05
pear|1.37
orange|3.09
The cells of pipe tables cannot contain block elements like paragraphs and lists,
and cannot span multiple lines. Note also that in LaTeX/PDF output, the cells
produced by pipe tables will not wrap, since there is no information available
about relative widths. If you want content to wrap within cells, use multiline
or grid tables.
Note: Pandoc also recognizes pipe tables of the following form, as can be produced by Emacs’ orgtbl-mode:
| One | Two
|
|-----+-------|
| my | table |
| is | nice |
The difference is that + is used instead of |. Other orgtbl features are not
supported. In particular, to get non-default column alignment, you’ll need to
add colons as above.
Metadata blocks
Extension: pandoc_title_block
If the file begins with a title block
% title
% author(s) (separated by semicolons)
% date
it will be parsed as bibliographic information, not regular text. (It will be used,
for example, in the title of standalone LaTeX or HTML output.) The block may
36
contain just a title, a title and an author, or all three elements. If you want to
include an author but no title, or a title and a date but no author, you need a
blank line:
%
% Author
% My title
%
% June 15, 2006
The title may occupy multiple lines, but continuation lines must begin with
leading space, thus:
% My title
on multiple lines
If a document has multiple authors, the authors may be put on separate lines
with leading space, or separated by semicolons, or both. So, all of the following
are equivalent:
% Author One
Author Two
% Author One; Author Two
% Author One;
Author Two
The date must fit on one line.
All three metadata fields may contain standard inline formatting (italics, links,
footnotes, etc.).
Title blocks will always be parsed, but they will affect the output only when the
--standalone (-s) option is chosen. In HTML output, titles will appear twice:
once in the document head – this is the title that will appear at the top of the
window in a browser – and once at the beginning of the document body. The title
in the document head can have an optional prefix attached (--title-prefix
or -T option). The title in the body appears as an H1 element with class “title”,
so it can be suppressed or reformatted with CSS. If a title prefix is specified
with -T and no title block appears in the document, the title prefix will be used
by itself as the HTML title.
The man page writer extracts a title, man page section number, and other
header and footer information from the title line. The title is assumed to be
37
the first word on the title line, which may optionally end with a (single-digit)
section number in parentheses. (There should be no space between the title and
the parentheses.) Anything after this is assumed to be additional footer and
header text. A single pipe character (|) should be used to separate the footer
text from the header text. Thus,
% PANDOC(1)
will yield a man page with the title PANDOC and section 1.
% PANDOC(1) Pandoc User Manuals
will also have “Pandoc User Manuals” in the footer.
% PANDOC(1) Pandoc User Manuals | Version 4.0
will also have “Version 4.0” in the header.
Extension: yaml_metadata_block
A YAML metadata block is a valid YAML object, delimited by a line of three
hyphens (---) at the top and a line of three hyphens (---) or three dots (...)
at the bottom. A YAML metadata block may occur anywhere in the document,
but if it is not at the beginning, it must be preceded by a blank line. (Note that,
because of the way pandoc concatenates input files when several are provided,
you may also keep the metadata in a separate YAML file and pass it to pandoc
as an argument, along with your markdown files:
pandoc chap1.md chap2.md chap3.md metadata.yaml -s -o book.html
Just be sure that the YAML file begins with --- and ends with --- or ....)
Metadata will be taken from the fields of the YAML object and added to any
existing document metadata. Metadata can contain lists and objects (nested
arbitrarily), but all string scalars will be interpreted as markdown. Fields with
names ending in an underscore will be ignored by pandoc. (They may be given
a role by external processors.)
A document may contain multiple metadata blocks. The metadata fields will
be combined through a left-biased union: if two metadata blocks attempt to set
the same field, the value from the first block will be taken.
When pandoc is used with -t markdown to create a markdown document, a
YAML metadata block will be produced only if the -s/--standalone option is
38
used. All of the metadata will appear in a single block at the beginning of the
document.
Note that YAML escaping rules must be followed. Thus, for example, if a title
contains a colon, it must be quoted. The pipe character (|) can be used to begin
an indented block that will be interpreted literally, without need for escaping.
This form is necessary when the field contains blank lines:
--title: 'This is the title: it contains a colon'
author:
- name: Author One
affiliation: University of Somewhere
- name: Author Two
affiliation: University of Nowhere
tags: [nothing, nothingness]
abstract: |
This is the abstract.
It consists of two paragraphs.
...
Template variables will be set automatically from the metadata. Thus, for
example, in writing HTML, the variable abstract will be set to the HTML
equivalent of the markdown in the abstract field:
<p>This is the abstract.</p>
<p>It consists of two paragraphs.</p>
Note: The author variable in the default templates expects a simple list or
string. To use the structured authors in the example, you would need a custom
template. For example:
$for(author)$
$if(author.name)$
$author.name$$if(author.affiliation)$ ($author.affiliation$)$endif$
$else$
$author$
$endif$
$endfor$
Backslash escapes
Extension: all_symbols_escapable
39
Except inside a code block or inline code, any punctuation or space character preceded by a backslash will be treated literally, even if it would normally
indicate formatting. Thus, for example, if one writes
*\*hello\**
one will get
<em>*hello*</em>
instead of
<strong>hello</strong>
This rule is easier to remember than standard markdown’s rule, which allows
only the following characters to be backslash-escaped:
\`*_{}[]()>#+-.!
(However, if the markdown_strict format is used, the standard markdown rule
will be used.)
A backslash-escaped space is parsed as a nonbreaking space. It will appear in
TeX output as ~ and in HTML and XML as \&#160; or \&nbsp;.
A backslash-escaped newline (i.e. a backslash occurring at the end of a line) is
parsed as a hard line break. It will appear in TeX output as \\ and in HTML as
<br />. This is a nice alternative to markdown’s “invisible” way of indicating
hard line breaks using two trailing spaces on a line.
Backslash escapes do not work in verbatim contexts.
Smart punctuation
Extension
If the --smart option is specified, pandoc will produce typographically correct
output, converting straight quotes to curly quotes, --- to em-dashes, -- to
en-dashes, and ... to ellipses. Nonbreaking spaces are inserted after certain
abbreviations, such as “Mr.”
Note: if your LaTeX template uses the csquotes package, pandoc will detect
automatically this and use \enquote{...} for quoted text.
40
Inline formatting
Emphasis
To emphasize some text, surround it with *s or _, like this:
This text is _emphasized with underscores_, and this
is *emphasized with asterisks*.
Double * or _ produces strong emphasis:
This is **strong emphasis** and __with underscores__.
A * or _ character surrounded by spaces, or backslash-escaped, will not trigger
emphasis:
This is * not emphasized *, and \*neither is this\*.
Extension: intraword_underscores
Because _ is sometimes used inside words and identifiers, pandoc does not interpret a _ surrounded by alphanumeric characters as an emphasis marker. If
you want to emphasize just part of a word, use *:
feas*ible*, not feas*able*.
Strikeout
Extension: strikeout
To strikeout a section of text with a horizontal line, begin and end it with ~~.
Thus, for example,
This ~~is deleted text.~~
Superscripts and subscripts
Extension: superscript, subscript
Superscripts may be written by surrounding the superscripted text by ˆ characters; subscripts may be written by surrounding the subscripted text by ~
characters. Thus, for example,
41
H~2~O is a liquid.
2^10^ is 1024.
If the superscripted or subscripted text contains spaces, these spaces must be
escaped with backslashes. (This is to prevent accidental superscripting and
subscripting through the ordinary use of ~ and ˆ.) Thus, if you want the letter
P with ‘a cat’ in subscripts, use P~a\ cat~, not P~a cat~.
Verbatim
To make a short span of text verbatim, put it inside backticks:
What is the difference between `>>=` and `>>`?
If the verbatim text includes a backtick, use double backticks:
Here is a literal backtick `` ` ``.
(The spaces after the opening backticks and before the closing backticks will be
ignored.)
The general rule is that a verbatim span starts with a string of consecutive
backticks (optionally followed by a space) and ends with a string of the same
number of backticks (optionally preceded by a space).
Note that backslash-escapes (and other markdown constructs) do not work in
verbatim contexts:
This is a backslash followed by an asterisk: `\*`.
Extension: inline_code_attributes
Attributes can be attached to verbatim text, just as with fenced code blocks:
`<$>`{.haskell}
Small caps
To write small caps, you can use an HTML span tag:
<span style="font-variant:small-caps;">Small caps</span>
(The semicolon is optional and there may be space after the colon.) This will
work in all output formats that support small caps.
42
Math
Extension: tex_math_dollars
Anything between two $ characters will be treated as TeX math. The opening
$ must have a non-space character immediately to its right, while the closing
$ must have a non-space character immediately to its left, and must not be
followed immediately by a digit. Thus, $20,000 and $30,000 won’t parse
as math. If for some reason you need to enclose text in literal $ characters,
backslash-escape them and they won’t be treated as math delimiters.
TeX math will be printed in all output formats. How it is rendered depends on
the output format:
Markdown, LaTeX, Org-Mode, ConTeXt It
between $ characters.
will
appear
verbatim
reStructuredText It will be rendered using an interpreted text role :math:,
as described here
AsciiDoc It will be rendered as latexmath:[...].
Texinfo It will be rendered inside a @math command.
groff man It will be rendered verbatim without $’s.
MediaWiki, DokuWiki It will be rendered inside <math> tags.
Textile It will be rendered inside <span class="math"> tags.
RTF, OpenDocument, ODT It will be rendered, if possible, using unicode
characters, and will otherwise appear verbatim.
Docbook If the --mathml flag is used, it will be rendered using mathml in an
inlineequation or informalequation tag. Otherwise it will be rendered,
if possible, using unicode characters.
Docx It will be rendered using OMML math markup.
FictionBook2 If the --webtex option is used, formulas are rendered as images
using Google Charts or other compatible web service, downloaded and
embedded in the e-book. Otherwise, they will appear verbatim.
HTML, Slidy, DZSlides, S5, EPUB The way math is rendered in HTML
will depend on the command-line options selected:
1. The default is to render TeX math as far as possible using unicode
characters, as with RTF, DocBook, and OpenDocument output. Formulas are put inside a span with class="math", so that they may
be styled differently from the surrounding text if needed.
43
2. If the --latexmathml option is used, TeX math will be displayed
between $ or $$ characters and put in <span> tags with class LaTeX.
The LaTeXMathML script will be used to render it as formulas.
(This trick does not work in all browsers, but it works in Firefox.
In browsers that do not support LaTeXMathML, TeX math will appear verbatim between $ characters.)
3. If the --jsmath option is used, TeX math will be put inside <span>
tags (for inline math) or <div> tags (for display math) with class
math. The jsMath script will be used to render it.
4. If the --mimetex option is used, the mimeTeX CGI script will be
called to generate images for each TeX formula. This should work in
all browsers. The --mimetex option takes an optional URL as argument. If no URL is specified, it will be assumed that the mimeTeX
CGI script is at /cgi-bin/mimetex.cgi.
5. If the --gladtex option is used, TeX formulas will be enclosed in
<eq> tags in the HTML output. The resulting htex file may then be
processed by gladTeX, which will produce image files for each formula
and an html file with links to these images. So, the procedure is:
pandoc -s --gladtex myfile.txt -o myfile.htex
gladtex -d myfile-images myfile.htex
# produces myfile.html and images in myfile-images
6. If the --webtex option is used, TeX formulas will be converted to
<img> tags that link to an external script that converts formulas to
images. The formula will be URL-encoded and concatenated with the
URL provided. If no URL is specified, the Google Chart API will be
used (http://chart.apis.google.com/chart?cht=tx&chl=).
7. If the --mathjax option is used, TeX math will be displayed between
\(...\) (for inline math) or \[...\] (for display math) and put in
<span> tags with class math. The MathJax script will be used to
render it as formulas.
Raw HTML
Extension: raw_html
Markdown allows you to insert raw HTML (or DocBook) anywhere in a document (except verbatim contexts, where <, >, and & are interpreted literally).
(Technically this is not an extension, since standard markdown allows it, but it
has been made an extension so that it can be disabled if desired.)
The raw HTML is passed through unchanged in HTML, S5, Slidy, Slideous,
DZSlides, EPUB, Markdown, and Textile output, and suppressed in other formats.
44
Extension: markdown_in_html_blocks
Standard markdown allows you to include HTML “blocks”: blocks of HTML
between balanced tags that are separated from the surrounding text with blank
lines, and start and end at the left margin. Within these blocks, everything
is interpreted as HTML, not markdown; so (for example), * does not signify
emphasis.
Pandoc behaves this way when the markdown_strict format is used; but by
default, pandoc interprets material between HTML block tags as markdown.
Thus, for example, Pandoc will turn
<table>
<tr>
<td>*one*</td>
<td>[a link](http://google.com)</td>
</tr>
</table>
into
<table>
<tr>
<td><em>one</em></td>
<td><a href="http://google.com">a link</a></td>
</tr>
</table>
whereas Markdown.pl will preserve it as is.
There is one exception to this rule: text between <script> and <style> tags
is not interpreted as markdown.
This departure from standard markdown should make it easier to mix markdown with HTML block elements. For example, one can surround a block of
markdown text with <div> tags without preventing it from being interpreted
as markdown.
Extension: native_divs
Use native pandoc Div blocks for content inside <div> tags. For the most part
this should give the same output as markdown_in_html_blocks, but it makes
it easier to write pandoc filters to manipulate groups of blocks.
Extension: native_spans
Use native pandoc Span blocks for content inside <span> tags. For the most
part this should give the same output as raw_html, but it makes it easier to
write pandoc filters to manipulate groups of inlines.
45
Raw TeX
Extension: raw_tex
In addition to raw HTML, pandoc allows raw LaTeX, TeX, and ConTeXt to
be included in a document. Inline TeX commands will be preserved and passed
unchanged to the LaTeX and ConTeXt writers. Thus, for example, you can use
LaTeX to include BibTeX citations:
This result was proved in \cite{jones.1967}.
Note that in LaTeX environments, like
\begin{tabular}{|l|l|}\hline
Age & Frequency \\ \hline
18--25 & 15 \\
26--35 & 33 \\
36--45 & 22 \\ \hline
\end{tabular}
the material between the begin and end tags will be interpreted as raw LaTeX,
not as markdown.
Inline LaTeX is ignored in output formats other than Markdown, LaTeX, and
ConTeXt.
LaTeX macros
Extension: latex_macros
For output formats other than LaTeX, pandoc will parse LaTeX \newcommand
and \renewcommand definitions and apply the resulting macros to all LaTeX
math. So, for example, the following will work in all output formats, not just
LaTeX:
⟨a, b, c⟩
In LaTeX output, the \newcommand definition will simply be passed unchanged
to the output.
Links
Markdown allows links to be specified in several ways.
46
Automatic links
If you enclose a URL or email address in pointy brackets, it will become a link:
<http://google.com>
<[email protected]>
Inline links
An inline link consists of the link text in square brackets, followed by the URL
in parentheses. (Optionally, the URL can be followed by a link title, in quotes.)
This is an [inline link](/url), and here's [one with
a title](http://fsf.org "click here for a good time!").
There can be no space between the bracketed part and the parenthesized part.
The link text can contain formatting (such as emphasis), but the title cannot.
Email addresses in inline links are not autodetected, so they have to be prefixed
with mailto:
[Write me!](mailto:[email protected])
Reference links
An explicit reference link has two parts, the link itself and the link definition,
which may occur elsewhere in the document (either before or after the link).
The link consists of link text in square brackets, followed by a label in square
brackets. (There can be space between the two.) The link definition consists of
the bracketed label, followed by a colon and a space, followed by the URL, and
optionally (after a space) a link title either in quotes or in parentheses. The
label must not be parseable as a citation (assuming the citations extension is
enabled): citations take precedence over link labels.
Here are some examples:
[my
[my
[my
[my
label
label
label
label
1]:
2]:
3]:
4]:
/foo/bar.html "My title, optional"
/foo
http://fsf.org (The free software foundation)
/bar#special 'A title in single quotes'
The URL may optionally be surrounded by angle brackets:
47
[my label 5]: <http://foo.bar.baz>
The title may go on the next line:
[my label 3]: http://fsf.org
"The free software foundation"
Note that link labels are not case sensitive. So, this will work:
Here is [my link][FOO]
[Foo]: /bar/baz
In an implicit reference link, the second pair of brackets is empty:
See [my website][].
[my website]: http://foo.bar.baz
Note: In Markdown.pl and most other markdown implementations, reference
link definitions cannot occur in nested constructions such as list items or block
quotes. Pandoc lifts this arbitrary seeming restriction. So the following is fine
in pandoc, though not in most other implementations:
> My block [quote].
>
> [quote]: /foo
Extension: shortcut_reference_links
In a shortcut reference link, the second pair of brackets may be omitted entirely:
See [my website].
[my website]: http://foo.bar.baz
Internal links
To link to another section of the same document, use the automatically generated identifier (see Header identifiers in HTML, LaTeX, and ConTeXt, below).
For example:
See the [Introduction](#introduction).
48
or
See the [Introduction].
[Introduction]: #introduction
Internal links are currently supported for HTML formats (including HTML slide
shows and EPUB), LaTeX, and ConTeXt.
Images
A link immediately preceded by a ! will be treated as an image. The link text
will be used as the image’s alt text:
![la lune](lalune.jpg "Voyage to the moon")
![movie reel]
[movie reel]: movie.gif
Extension: implicit_figures
An image occurring by itself in a paragraph will be rendered as a figure with a
caption.4 (In LaTeX, a figure environment will be used; in HTML, the image
will be placed in a div with class figure, together with a caption in a p with
class caption.) The image’s alt text will be used as the caption.
![This is the caption](/url/of/image.png)
If you just want a regular inline image, just make sure it is not the only thing
in the paragraph. One way to do this is to insert a nonbreaking space after the
image:
![This image won't be a figure](/url/of/image.png)\
Footnotes
Extension: footnotes
Pandoc’s markdown allows footnotes, using the following syntax:
4 This feature is not yet implemented for RTF, OpenDocument, or ODT. In those formats,
you’ll just get an image in a paragraph by itself, with no caption.
49
Here is a footnote reference,[^1] and another.[^longnote]
[^1]: Here is the footnote.
[^longnote]: Here's one with multiple blocks.
Subsequent paragraphs are indented to show that they
belong to the previous footnote.
{ some.code }
The whole paragraph can be indented, or just the first
line. In this way, multi-paragraph footnotes work like
multi-paragraph list items.
This paragraph won't be part of the note, because it
isn't indented.
The identifiers in footnote references may not contain spaces, tabs, or newlines.
These identifiers are used only to correlate the footnote reference with the note
itself; in the output, footnotes will be numbered sequentially.
The footnotes themselves need not be placed at the end of the document. They
may appear anywhere except inside other block elements (lists, block quotes,
tables, etc.).
Extension: inline_notes
Inline footnotes are also allowed (though, unlike regular notes, they cannot
contain multiple paragraphs). The syntax is as follows:
Here is an inline note.^[Inlines notes are easier to write, since
you don't have to pick an identifier and move down to type the
note.]
Inline and regular footnotes may be mixed freely.
Citations
Extension: citations
Using an external filter, pandoc-citeproc, pandoc can automatically generate
citations and a bibliography in a number of styles. Basic usage is
pandoc --filter pandoc-citeproc myinput.txt
50
In order to use this feature, you will need to specify a bibliography file using the
bibliography metadata field in a YAML metadata section, or --bibliography
command line argument. You can supply multiple --bibliography arguments
or set bibliography metadata field to YAML array, if you want to use multiple
bibliography files. The bibliography may have any of these formats:
Format
File extension
BibLaTeX
BibTeX
Copac
CSL JSON
CSL YAML
EndNote
EndNote XML
ISI
MEDLINE
MODS
RIS
.bib
.bibtex
.copac
.json
.yaml
.enl
.xml
.wos
.medline
.mods
.ris
Note that .bib can generally be used with both BibTeX and BibLaTeX files,
but you can use .bibtex to force BibTeX.
Note that pandoc-citeproc --bib2json and pandoc-citeproc --bib2yaml
can produce .json and .yaml files from any of the supported formats.
In-field markup: In bibtex and biblatex databases, pandoc-citeproc parses (a
subset of) LaTeX markup; in CSL JSON databases, an HTML-like markup
(specs); and in CSL YAML databases, pandoc markdown. pandoc-citeproc
-j and -y interconvert these markup formats as far as possible.
As an alternative to specifying a bibliography file, you can include the citation
data directly in the references field of the document’s YAML metadata. The
field should contain an array of YAML-encoded references, for example:
--references:
- type: article-journal
id: WatsonCrick1953
author:
- family: Watson
given: J. D.
- family: Crick
given: F. H. C.
issued:
date-parts:
- - 1953
51
- 4
- 25
title: 'Molecular structure of nucleic acids: a structure for deoxyribose
nucleic acid'
title-short: Molecular structure of nucleic acids
container-title: Nature
volume: 171
issue: 4356
page: 737-738
DOI: 10.1038/171737a0
URL: http://www.nature.com/nature/journal/v171/n4356/abs/171737a0.html
language: en-GB
...
(pandoc-citeproc --bib2yaml can produce these from a bibliography file in
one of the supported formats.)
By default, pandoc-citeproc will use the Chicago Manual of Style author-date
format for citations and references. To use another style, you will need to specify
a CSL 1.0 style file in the csl metadata field. A repository of CSL styles
can be found at https://github.com/citation-style-language/styles. See also
http://zotero.org/styles for easy browsing. A primer on creating and modifying
CSL styles can be found at http://citationstyles.org/downloads/primer.html.
Citations go inside square brackets and are separated by semicolons. Each
citation must have a key, composed of ‘@’ + the citation identifier from the
database, and may optionally have a prefix, a locator, and a suffix. The citation
key must begin with a letter, digit, or _, and may contain alphanumerics, _, and
internal punctuation characters (:.#$%&-+?<>~/). Here are some examples:
Blah blah [see @doe99, pp. 33-35; also @smith04, ch. 1].
Blah blah [@doe99, pp. 33-35, 38-39 and *passim*].
Blah blah [@smith04; @doe99].
A minus sign (-) before the @ will suppress mention of the author in the citation.
This can be useful when the author is already mentioned in the text:
Smith says blah [-@smith04].
You can also write an in-text citation, as follows:
@smith04 says blah.
@smith04 [p. 33] says blah.
52
If the style calls for a list of works cited, it will be placed at the end of the
document. Normally, you will want to end your document with an appropriate
header:
last paragraph...
# References
The bibliography will be inserted after this header. Note that the unnumbered
class will be added to this header, so that the section will not be numbered.
If you want to include items in the bibliography without actually citing them
in the body text, you can define a dummy nocite metadata field and put the
citations there:
--nocite: |
@item1, @item2
...
@item3
In this example, the document will contain a citation for item3 only, but the
bibliography will contain entries for item1, item2, and item3.
For LaTeX or PDF output, you can also use NatBib or BibLaTeX to render
bibliography. In order to do so, specify bibliography files as outlined above,
and add --natbib or --biblatex argument to pandoc invocation. Bear in
mind that bibliography files have to be in respective format (either BibTeX or
BibLaTeX).
Non-pandoc extensions
The following markdown syntax extensions are not enabled by default
in pandoc, but may be enabled by adding +EXTENSION to the format
name, where EXTENSION is the name of the extension. Thus, for example,
markdown+hard_line_breaks is markdown with hard line breaks.
Extension: lists_without_preceding_blankline
Allow a list to occur right after a paragraph, with no intervening blank space.
Extension: hard_line_breaks
Causes all newlines within a paragraph to be interpreted as hard line breaks
instead of spaces.
53
Extension: ignore_line_breaks
Causes newlines within a paragraph to be ignored, rather than being treated as
spaces or as hard line breaks. This option is intended for use with East Asian
languages where spaces are not used between words, but text is divided into
lines for readability.
Extension: tex_math_single_backslash
Causes anything between \( and \) to be interpreted as inline TeX math, and
anything between \[ and \] to be interpreted as display TeX math. Note: a
drawback of this extension is that it precludes escaping ( and [.
Extension: tex_math_double_backslash
Causes anything between \\( and \\) to be interpreted as inline TeX math,
and anything between \\[ and \\] to be interpreted as display TeX math.
Extension: markdown_attribute
By default, pandoc interprets material inside block-level tags as markdown. This
extension changes the behavior so that markdown is only parsed inside blocklevel tags if the tags have the attribute markdown=1.
Extension: mmd_title_block
Enables a MultiMarkdown style title block at the top of the document, for
example:
Title:
Author:
Date:
Comment:
My title
John Doe
September 1, 2008
This is a sample mmd title block, with
a field spanning multiple lines.
See the MultiMarkdown documentation for details. If pandoc_title_block or
yaml_metadata_block is enabled, it will take precedence over mmd_title_block.
Extension: abbreviations
Parses PHP Markdown Extra abbreviation keys, like
*[HTML]: Hyper Text Markup Language
Note that the pandoc document model does not support abbreviations, so if
this extension is enabled, abbreviation keys are simply skipped (as opposed to
being parsed as paragraphs).
54
Extension: autolink_bare_uris
Makes all absolute URIs into links, even when not surrounded by pointy braces
<...>.
Extension: ascii_identifiers
Causes the identifiers produced by auto_identifiers to be pure ASCII. Accents are stripped off of accented latin letters, and non-latin letters are omitted.
Extension: link_attributes
Parses multimarkdown style key-value attributes on link and image references.
Note that pandoc’s internal document model provides nowhere to put these, so
they are presently just ignored.
Extension: mmd_header_identifiers
Parses multimarkdown style header identifiers (in square brackets, after the
header but before any trailing #s in an ATX header).
Extension: compact_definition_lists
Activates the definition list syntax of pandoc 1.12.x and earlier. This syntax
differs from the one described above in several respects:
• No blank line is required between consecutive items of the definition list.
• To get a “tight” or “compact” list, omit space between consecutive items;
the space between a term and its definition does not affect anything.
• Lazy wrapping of paragraphs is not allowed: the entire definition must be
indented four spaces.5
Markdown variants
In addition to pandoc’s extended markdown, the following markdown variants
are supported:
5 To see why laziness is incompatible with relaxing the requirement of a blank line between
items, consider the following example:
bar
:
foo
:
definition
definition
Is this a single list item with two definitions of “bar,” the first of which is lazily wrapped,
or two list items? To remove the ambiguity we must either disallow lazy wrapping or require
a blank line between list items.
55
markdown_phpextra (PHP Markdown Extra) footnotes, pipe_tables,
raw_html, markdown_attribute, fenced_code_blocks, definition_lists,
intraword_underscores,
header_attributes,
abbreviations,
shortcut_reference_links.
markdown_github (GitHub-flavored Markdown) pipe_tables, raw_html,
tex_math_single_backslash, fenced_code_blocks, auto_identifiers,
ascii_identifiers, backtick_code_blocks, autolink_bare_uris,
intraword_underscores, strikeout, hard_line_breaks, shortcut_reference_links.
markdown_mmd (MultiMarkdown) pipe_tables raw_html, markdown_attribute,
link_attributes, raw_tex, tex_math_double_backslash, intraword_underscores,
mmd_title_block, footnotes, definition_lists, all_symbols_escapable,
implicit_header_references, auto_identifiers, mmd_header_identifiers,
shortcut_reference_links.
markdown_strict (Markdown.pl) raw_html
Extensions with formats other than markdown
Some of the extensions discussed above can be used with formats other than
markdown:
• auto_identifiers can be used with latex, rst, mediawiki, and textile
input (and is used by default).
• tex_math_dollars, tex_math_single_backslash, and tex_math_double_backslash
can be used with html input. (This is handy for reading web pages
formatted using MathJax, for example.)
Producing slide shows with Pandoc
You can use Pandoc to produce an HTML + javascript slide presentation that
can be viewed via a web browser. There are five ways to do this, using S5,
DZSlides, Slidy, Slideous, or reveal.js. You can also produce a PDF slide show
using LaTeX beamer.
Here’s the markdown source for a simple slide show, habits.txt:
% Habits
% John Doe
% March 22, 2005
# In the morning
## Getting up
56
- Turn off alarm
- Get out of bed
## Breakfast
- Eat eggs
- Drink coffee
# In the evening
## Dinner
- Eat spaghetti
- Drink wine
-----------------![picture of spaghetti](images/spaghetti.jpg)
## Going to sleep
- Get in bed
- Count sheep
To produce an HTML/javascript slide show, simply type
pandoc -t FORMAT -s habits.txt -o habits.html
where FORMAT is either s5, slidy, slideous, dzslides, or revealjs.
For Slidy, Slideous, reveal.js, and S5, the file produced by pandoc with the
-s/--standalone option embeds a link to javascripts and CSS files, which are
assumed to be available at the relative path s5/default (for S5), slideous
(for Slideous), reveal.js (for reveal.js), or at the Slidy website at w3.org (for
Slidy). (These paths can be changed by setting the slidy-url, slideous-url,
revealjs-url, or s5-url variables; see --variable, above.) For DZSlides, the
(relatively short) javascript and css are included in the file by default.
With all HTML slide formats, the --self-contained option can be used to
produce a single file that contains all of the data necessary to display the slide
show, including linked scripts, stylesheets, images, and videos.
To produce a PDF slide show using beamer, type
pandoc -t beamer habits.txt -o habits.pdf
Note that a reveal.js slide show can also be converted to a PDF by printing it
to a file from the browser.
57
Structuring the slide show
By default, the slide level is the highest header level in the hierarchy that is
followed immediately by content, and not another header, somewhere in the
document. In the example above, level 1 headers are always followed by level 2
headers, which are followed by content, so 2 is the slide level. This default can
be overridden using the --slide-level option.
The document is carved up into slides according to the following rules:
• A horizontal rule always starts a new slide.
• A header at the slide level always starts a new slide.
• Headers below the slide level in the hierarchy create headers within a slide.
• Headers above the slide level in the hierarchy create “title slides,” which
just contain the section title and help to break the slide show into sections.
• A title page is constructed automatically from the document’s title block,
if present. (In the case of beamer, this can be disabled by commenting
out some lines in the default template.)
These rules are designed to support many different styles of slide show. If you
don’t care about structuring your slides into sections and subsections, you can
just use level 1 headers for all each slide. (In that case, level 1 will be the slide
level.) But you can also structure the slide show into sections, as in the example
above.
Note: in reveal.js slide shows, if slide level is 2, a two-dimensional layout will be
produced, with level 1 headers building horizontally and level 2 headers building
vertically. It is not recommended that you use deeper nesting of section levels
with reveal.js.
Incremental lists
By default, these writers produce lists that display “all at once.” If you want
your lists to display incrementally (one item at a time), use the -i option. If you
want a particular list to depart from the default (that is, to display incrementally
without the -i option and all at once with the -i option), put it in a block quote:
> - Eat spaghetti
> - Drink wine
In this way incremental and nonincremental lists can be mixed in a single document.
58
Inserting pauses
You can add “pauses” within a slide by including a paragraph containing three
dots, separated by spaces:
# Slide with a pause
content before the pause
. . .
content after the pause
Styling the slides
You can change the style of HTML slides by putting customized CSS
files in $DATADIR/s5/default (for S5), $DATADIR/slidy (for Slidy), or
$DATADIR/slideous (for Slideous), where $DATADIR is the user data directory
(see --data-dir, above). The originals may be found in pandoc’s system data
directory (generally $CABALDIR/pandoc-VERSION/s5/default). Pandoc will
look there for any files it does not find in the user data directory.
For dzslides, the CSS is included in the HTML file itself, and may be modified
there.
For reveal.js, themes can be used by setting the theme variable, for example:
-V theme=moon
Or you can specify a custom stylesheet using the --css option.
To style beamer slides, you can specify a beamer “theme” or “colortheme” using
the -V option:
pandoc -t beamer habits.txt -V theme:Warsaw -o habits.pdf
Note that header attributes will turn into slide attributes (on a <div> or
<section>) in HTML slide formats, allowing you to style individual slides. In
Beamer, the only header attribute that affects slides is the allowframebreaks
class, which sets the allowframebreaks option, causing multiple slides to be
created if the content overfills the frame. This is recommended especially for
bibliographies:
# References {.allowframebreaks}
59
Speaker notes
reveal.js has good support for speaker notes. You can add notes to your markdown document thus:
<div class="notes">
This is my note.
- It can contain markdown
- like this list
</div>
To show the notes window, press s while viewing the presentation. Notes are
not yet supported for other slide formats, but the notes will not appear on the
slides themselves.
Marking frames “fragile” in beamer
Sometimes it is necessary to add the LaTeX [fragile] option to a frame in
beamer (for example, when using the minted environment). This can be forced
by adding the fragile class to the header introducing the slide:
# Fragile slide {.fragile}
EPUB Metadata
EPUB metadata may be specified using the --epub-metadata option, but if
the source document is markdown, it is better to use a YAML metadata block.
Here is an example:
--title:
- type: main
text: My Book
- type: subtitle
text: An investigation of metadata
creator:
- role: author
text: John Smith
- role: editor
text: Sarah Jones
60
identifier:
- scheme: DOI
text: doi:10.234234.234/33
publisher: My Press
rights: © 2007 John Smith, CC BY-NC
...
The following fields are recognized:
identifier Either a string value or an object with fields text and scheme.
Valid values for scheme are ISBN-10, GTIN-13, UPC, ISMN-10, DOI, LCCN,
GTIN-14, ISBN-13, Legal deposit number, URN, OCLC, ISMN-13, ISBN-A,
JP, OLCC.
title Either a string value, or an object with fields file-as and type, or a
list of such objects. Valid values for type are main, subtitle, short,
collection, edition, extended.
creator Either a string value, or an object with fields role, file-as, and
text, or a list of such objects. Valid values for role are marc relators,
but pandoc will attempt to translate the human-readable versions (like
“author” and “editor”) to the appropriate marc relators.
contributor Same format as creator.
date A string value in YYYY-MM-DD format. (Only the year is necessary.) Pandoc will attempt to convert other common date formats.
language A string value in RFC5646 format. Pandoc will default to the local
language if nothing is specified.
subject A string value or a list of such values.
description A string value.
type A string value.
format A string value.
relation A string value.
coverage A string value.
rights A string value.
cover-image A string value (path to cover image).
stylesheet A string value (path to CSS stylesheet).
page-progression-direction Either ltr or rtl. Specifies the page-progression-direction
spine attribute.
Literate Haskell support
If you append +lhs (or +literate_haskell) to an appropriate input or output format (markdown, markdown_strict, rst, or latex for input or output;
beamer, html or html5 for output only), pandoc will treat the document as
literate Haskell source. This means that
61
• In markdown input, “bird track” sections will be parsed as Haskell
code rather than block quotations. Text between \begin{code} and
\end{code} will also be treated as Haskell code.
• In markdown output, code blocks with classes haskell and literate will
be rendered using bird tracks, and block quotations will be indented one
space, so they will not be treated as Haskell code. In addition, headers
will be rendered setext-style (with underlines) rather than atx-style (with
‘#’ characters). (This is because ghc treats ‘#’ characters in column 1 as
introducing line numbers.)
• In restructured text input, “bird track” sections will be parsed as Haskell
code.
• In restructured text output, code blocks with class haskell will be rendered using bird tracks.
• In LaTeX input, text in code environments will be parsed as Haskell code.
• In LaTeX output, code blocks with class haskell will be rendered inside
code environments.
• In HTML output, code blocks with class haskell will be rendered with
class literatehaskell and bird tracks.
Examples:
pandoc -f markdown+lhs -t html
reads literate Haskell source formatted with markdown conventions and writes
ordinary HTML (without bird tracks).
pandoc -f markdown+lhs -t html+lhs
writes HTML with the Haskell code in bird tracks, so it can be copied and
pasted as literate Haskell source.
Syntax highlighting
Pandoc will automatically highlight syntax in fenced code blocks that are
marked with a language name. (See [Extension: inline_code_attributes]
and [Extension: fenced_code_attributes], above.) The Haskell library
highlighting-kate is used for highlighting, which works in HTML, Docx,
and LaTeX/PDF output. The color scheme can be selected using the
--highlight-style option. The default color scheme is pygments, which
62
imitates the default color scheme used by the Python library pygments, but
pygments is not actually used to do the highlighting.
To see a list of language names that pandoc will recognize, type pandoc
--version.
To disable highlighting, use the --no-highlight option.
Custom writers
Pandoc can be extended with custom writers written in lua. (Pandoc includes
a lua interpreter, so lua need not be installed separately.)
To use a custom writer, simply specify the path to the lua script in place of the
output format. For example:
pandoc -t data/sample.lua
Creating a custom writer requires writing a lua function for each possible element in a pandoc document. To get a documented example which you can
modify according to your needs, do
pandoc --print-default-data-file sample.lua
Authors
© 2006-2015 John MacFarlane ([email protected]). Released under the GPL,
version 2 or greater. This software carries no warranty of any kind. (See COPYRIGHT for full copyright and warranty notices.)
Contributors include Aaron Wolen, Albert Krewinkel, Alexander Kondratskiy,
Alexander Sulfrian, Alexander V Vershilov, Alfred Wechselberger, Andreas
Lööw, Antoine Latter, Arlo O’Keeffe, Artyom Kazak, Ben Gamari, Beni
Cherniavsky-Paskin, Bjorn Buckwalter, Bradley Kuhn, Brent Yorgey, Bryan
O’Sullivan, B. Scott Michel, Caleb McDaniel, Calvin Beck, Christoffer Ackelman, Christoffer Sawicki, Clare Macrae, Clint Adams, Conal Elliott, Craig
S. Bosma, Daniel Bergey, Daniel T. Staal, David Lazar, David Röthlisberger,
Denis Laxalde, Douglas Calvert, Douglas F. Calvert, Eric Kow, Eric Seidel,
Florian Eitel, François Gannaz, Freiric Barral, Fyodor Sheremetyev, Gabor
Pali, Gavin Beatty, Greg Maslov, Grégory Bataille, Greg Rundlett, gwern,
Gwern Branwen, Hans-Peter Deifel, Henry de Valence, Ilya V. Portnov,
infinity0x, Jaime Marquínez Ferrándiz, James Aspnes, Jamie F. Olson, Jason
Ronallo, Jeff Arnold, Jeff Runningen, Jens Petersen, Jérémy Bobbio, Jesse
63
Rosenthal, J. Lewis Muir, Joe Hillenbrand, John MacFarlane, Jonas Smedegaard, Jonathan Daugherty, Josef Svenningsson, Jose Luis Duran, Julien
Cretel, Justin Bogner, Kelsey Hightower, Konstantin Zudov, Lars-Dominik
Braun, Luke Plant, Mark Szepieniec, Mark Wright, Masayoshi Takahashi,
Matej Kollar, Mathias Schenner, Matthew Pickering, Matthias C. M. Troffaes,
Max Bolingbroke, Max Rydahl Andersen, mb21, Merijn Verstraaten, Michael
Snoyman, Michael Thompson, MinRK, Nathan Gass, Neil Mayhew, Nick Bart,
Nicolas Kaiser, Nikolay Yakimov, Paulo Tanimoto, Paul Rivier, Peter Wang,
Philippe Ombredanne, Phillip Alday, Puneeth Chaganti, qerub, Ralf Stephan,
Recai Oktaş, rodja.trappe, RyanGlScott, Scott Morrison, Sergei Trofimovich,
Sergey Astanin, Shahbaz Youssefi, Shaun Attfield, shreevatsa.public, Simon
Hengel, Sumit Sahrawat, takahashim, thsutton, Tim Lin, Timothy Humphries,
Todd Sifleet, Tom Leese, Uli Köhler, Václav Zeman, Viktor Kronvall, Vincent,
and Wikiwide.
64