steel trims - Bailey Metal Products Limited

AND ACCESSORIES FOR DRYWALL CONSTRUCTION
Quality in your corner.
MONTREAL
• TORONTO
•
CALGARY
•
EDMONTON
• VANCOUVER
THE STRENGTH WITHIN
STEEL TRIMS
S TEE L T R IMS A N D ACCESSOR I ES
for Dr ywall Co ns t ruc t i on
BAILEY H AS YO U R TR I M SO LU TIO N
Quality in your corner.
The Bailey Group of Companies is recognized as the industry leader, offering building solutions to both the commercial framing and drywall finishing residential markets. We offer a range of drywall trim solutions including metal trims, Platinum® Paper-faced metal beads and vinyl trims.
For further information on our Platinum® Paper-faced product line or our vinyl trims please visit us at www.bmp-group.com.
Our metal trims are made of sturdy zinc-coated steel, for excellent protection to external corners.
Our trims provide superior compound adhesion and can be applied either with nails or screws.
Custom-made profiles and shapes are available to meet your specifications.
2
B A I L E Y M E TA L P R O D U C T S LT D . S T E E L T R I M S A N D A C C E S S O R I E S F O R D R Y WA L L C O N S T R U C T I O N
STANDARDS
BAILEY products are designed and produced to meet and exceed
all codes and standards.
Applicable standards for Trims and Accessories are as follows:
PROFILE, STEEL THICKNESS AND DIMENSIONS – ASTM C645
(With permissible tolerance) for stud and track and furring channel.
GRADE OF STEEL – ASTM A1003
For sheet metal, metallic and nonmetallic coated.
COATING (GALVANIZING)
Zinc/galvanized coated steel to – ASTM A653
Aluminum zinc coated steel to – ASTM A792
INSTALLATION – ASTM C754
STANDARDS FOR TRIMS AND ACCESSORIES – ASTM C1047
WWW.BMP-GROUP.COM
3
DRYWALL CO RN ER BEA D & METAL TR I MS
D1 00 - 90 ˚ DRYWAL L C ORN E R B E AD
• P rovides excellent protection and precision to 90˚
external corners
• Holes and knurled surface allow for superior joint compound adhesion
• Can be applied either with nails, screws or clinch-on tools
• Available from stock with 1-1/4” or 1-1/8” flanges
Stud
Stud
1-1/4” or 1-1/8”
1-1/4” or 1-1/8”
D100
Drywall
D100
D1 00 - 13 0 ˚ DRYWAL L C ORN E R B E AD
• Provides excellent protection and precision to wide angle corners from 130˚ to 135˚
• Holes and knurled surface allow for superior joint compound adhesion
• Can be applied either with nails, screws or clinch-on tools
• Available from stock with 1-1/4” or 1-1/8” flanges
1-1/4”
or 1-1/8”
130˚
4
B A I L E Y M E TA L P R O D U C T S LT D . S T E E L T R I M S A N D A C C E S S O R I E S F O R D R Y WA L L C O N S T R U C T I O N
Drywall
D2 0 0 DRYWALL M E TAL L T RIM
• P rovides a neat finish and solid protection to gypsum wallboard at window and door jambs where wood trim is omitted
• U
sed with 1/2” and 5/8” wallboard
• H
oles and knurled surface allow for superior joint compound
adhesion
• C
an be applied either with nails or screws
Metal
Metal
StudStud
= 1/2”
A = A1/2”
or 5/8”
or 5/8”
A A
Drywall
Drywall
1-1/8”
1-1/8”
D200
D200
D4 0 0 DRYWALL M E TAL J T RIM
• P rovides edge protection at window and door openings, and
where wallboard butts against concrete or other materials
• U
sed with 3/8”, 1/2” or 5/8” wallboard
• F inishing compound is optional
3/8”
5/8” or 3/8” or 1/2”
WWW.BMP-GROUP.COM
5
DRYWALL CO RN ER BEA D & METAL TR I MS
4 4 11 C H A N N E L T RIM
• P rovides a tapeable steel casing that provides maximum protection at door and window jambs
• Used with 1/2” and 5/8” wallboard
• Quickly installed by nailing through channel and board into
the jamb or framing
Stud
Stud
A=
= 1/2”
1/2”
A
or 5/8”
5/8”
or
A
A
1/2”
1/2”
1-1/8”
1-1/8”
6
Drywall
Drywall
4411
4411
B A I L E Y M E TA L P R O D U C T S LT D . S T E E L T R I M S A N D A C C E S S O R I E S F O R D R Y WA L L C O N S T R U C T I O N
DRYWALL REV EAL TRIM S
D3 0 0 DRYWALL RE V E AL T RIM
• Provides crisp clean reveals around openings or at ceilings and floors
• Holes and knurled surface allow for superior joint compound adhesion
• Available from stock with 1/2” or 5/8” flanges to provide a 1/2” reveal
B = 1/2”
B = 1/2”
B
B
1”
A = 1”
A = 5/8”
1/2”or
1/2”or 5/8”
A
A
Drywall
Drywall
D8 0 0 DRYWALL RE V E AL T RIM (DIFFUSER TR IM)
• Used at doors, windows, ceilings, etc.
• Surface is ready for painting and additional finishing is not required
• Available from stock with 1/2” reveal
• Custom reveals are available upon request (please inquire for availability by region)
1/2” or 5/8”
WWW.BMP-GROUP.COM
7
T R I M S & SPECIA L PRO FILE S
D5 00 A N G L E T RIM
• F inishes and protects
drywall edges
• A
pplied using standard joint compound
adhesion after board is in place
• Available from stock 1-1/4” X 1/2”
90˚
1-1/4”
1/2”
D7 00 A N G L E FRAM IN G T RIM
• V
ery versatile 90˚ angle used to connect, reinforce or secure framing in various drywall applications
• Common applications include column framing, bulkheads, soffit framing and floor and ceiling runners
• Available from stock 1” X 2”
Stud
Stud
1”
1”
D-700
D-700
90˚
90˚
2”
2”
Drywall
Drywall
1 3 0˚ A N G L E T RIM S
130˚
• Designed for 130˚ external corner construction
1-1/2” or 2”
130˚
• F lange size and angle can be varied to meet
design criteria
vailable from stock with 2” x 2” or 1-1/2” x
• A
1-1/2”
8
B A I L E Y M E TA L P R O D U C T S LT D . S T E E L T R I M S A N D A C C E S S O R I E S F O R D R Y WA L L C O N S T R U C T I O N
D9 0 0 Z T RIM
1-1/4”
olds rigid insulation in place and provides • H
a face to fasten finishing (drywall, siding, etc.)
A
• Suitable for interior or exterior applications
• Available in steel thicknesses up to 68 mils (14ga)
1-1/4”
Stock A = 1-1/2” or 2”
vailable from stock 1-1/2” X 2” insulation • A
thickness
S P E C I A L PROFILE S
• S pecial profiles and custom shapes are manufactured from
different steel thicknesses and widths up to 68 mils
• Girts, battens and purlins are made to specification
• Please inquire for availability by region
R E TAI N ER TEE S TU D : FOR R I GI D I N SUL ATI ON
D1 0 0 5 RE TAIN E R T E E ST UD
1-7/8”
D-1005 Retainer Tee Stud
Placed Between Adjoing
Sheets of Rigid insulation
Rigid Insulation
1/2”
Drywall Screws
Drywall
• H
olds rigid insulation against a masonry wall when placed between adjoining sheets
• The top surface is knurled to easily accept screws to secure drywall
• M
anufactured from zinc-coated steel with pierced holes for securing the “Tee” to the masonry wall
One Edge of Rigid Insulation
Either Ship-Lap or Butt
Insulation May Be Used
Note: To Finish at Openings
and Wall Junctions an Angle
such as D700 is Recommended
• H
oles are 5/16” diameter spaced 6” o.c. to allow for greater
flexibility
1-7/8”
1/2”
WWW.BMP-GROUP.COM
9
F UR R I NG CHAN N ELS & TO P H AT SECTI ON S
D1 00 1 DRY WALL FU RRIN G C HAN NELS
• A
hat-shaped framing accessory designed to “furr” out any surface for the application of the final finish (i.e. metal siding on steel studs, drywall on masonry, etc.)
• Furring channel used in conjunction with cold rolled channel is the ideal system for the construction of a drywall ceiling
• Install 1-1/2” cold rolled galvanized channel at 4’ o.c. suspended
from floor joist or deck using the specified hanger wire (Lighter than #9 (gauge) wire should not be used)
• Drywall furring channel is installed perpendicular to the cold rolled channel at 16” o.c.
• Steel stud or D700 1” x 2” angle may be used for perimeter
connection of gypsum board
• Fully engineered in .018, .033 and .043 thicknesses
• Contact us at www.bmp-group.com for the published span tables
Hanger Spacing
4’0” o.c. Maximum
1-3/8”
1 1/2” Cold
Rolled Channel
4’0” o.c. Maximum
Tie Wire
1-3/8”
7/8”
7/8”
2-3/4”
2-3/4”
Drywall
Furring
Channel
TO P H AT S E CT IO N S
• Similar to D1001 Drywall Furring Channel, Top Hat sections are designed for areas where a wider face or a deeper section is required (roof purlins, etc.)
• A
vailable in .018, .033 and .043 thicknesses to enable construction
over greater spans
10 B A I L E Y M E T A L P R O D U C T S L T D . S T E E L T R I M S A N D A C C E S S O R I E S F O R D R Y W A L L C O N S T R U C T I O N
R E SI LI EN T CHAN N EL S YSTEM: F OR SOUN D CON TROL
BAILEY RC PLUS™ DELIVERS SUPERIOR STC RATINGS*
Although there are many products and techniques available to enhance
sound attenuation between living spaces, resilient channel remains the
most cost effective and commonly used technique.
Bailey RC PLUS™ Resilient Channel is a single leg specially formed metal
component that, when used to support the drywall (instead of directly
fastening drywall to the studs or joists), greatly improves the sound transmission
characteristics of the wall or ceiling assembly.
1-1/4”
1/2”
2-1/4”
• Installs on wood or metal framing
• National Research Council tested for Bailey Metal Products Limited
• Use RC PLUS™ to meet sound ratings with less board, or use the same layers
of board to get enhanced ratings
• F eatures knurled face for easy screw penetration. Innovative slots punched in the metal web provide resiliency to reduce sound transmission through the steel
• P re-drilled holes at 1" o.c. coordinate with web slots to offer inherent alignment
of stud to web slots, thereby eliminating potential for installer error
• T
he unique design of the slotted web assists in faster, more accurate spacing
and easier installation
* Sound Transmission Class (or STC) is a rating of how well a building partition attenuates airborne sound
W W W . B M P - G R O U P . C O M 11
STEEL TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION
The technical data in this brochure is intended as an aid to the design professional and should not be used to replace the judgement of a qualified Engineer or Architect.
[email protected] • www.bmp-group.com
ST08IN16-2000
MONTREAL
TORONTO
CALGARY
EDMONTON
VANCOUVER
525 Avenue Edward VII
Dorval, QC H9P 1E7
Tel. (514) 735-3455
800-263-3455
Fax. (514) 735-5052
1 Caldari Road
Concord, ON L4K 3Z9
Tel. (905) 738-9267
800-668-2154
Fax. (905) 738-5712
3924 27th Street NE
Calgary, AB T1Y 5K7
Tel. (403) 248-3536
800-665-2013
Fax. (403) 248-0288
101-5710 Roper Road NW
Edmonton, AB T6B 3G7
Tel. (780) 462-5757
800-563-1751
Fax. (780) 450-3378
7715 Anvil Way
Surrey, BC V3W 6A2
Tel. (604) 590-5100
800-818-2666
Fax. (604) 590-5105