[PL 009-011] I/A Series Multirange Pressure Transmitters

Parts List
PL 009-011
April 2015
I/A Series®
Multirange Pressure Transmitters
—
IGP25 Series
with
FoxCom™, HART, and FOUNDATION Fieldbus
Communication Protocols
—
for Gauge Pressure Measurement
—
Style A
Give instrument Model Code when ordering.
*Parts preceded by an asterisk are recommended spare parts.
See Recommended Spare Parts Summary section for quantities.
TO ORDER PARTS, CALL 1-866-746-6477.
PL 009-011
Page 2
NOTES
1 For Transmitter Assembly Topworks, refer to Figure 1.
2 For Transmitter Replacement Sensor Assemblies (not flameproof), refer to Figure 2.
3 For Flameproof Transmitter Replacement Sensor Assemblies, refer to Figure 3.
4 For Sanitary & Pulp/Paper Transmitter Replacement Sensor Assemblies, see Figure 4.
5 For Optional LCD Indicator Assembly, refer to Figure 5.
6 For Optional Custody Transfer Lock and Seal, refer to Figure 6.
7 For Optional Metric Process Connection, refer to Figure 7.
8 For Optional Block and Bleed Valve, refer to Figure 8.
9 For Optional Vent Screw, refer to Figure 9.
10 For Optional Conduit Thread Adapters, refer to Figure 10.
11 For Optional Pipe Mounting Sets used with Standard Transmitters, refer to Figures 11 and 12.
12 For Optional Pipe Mounting Sets used with Flameproof Transmitters, refer to 12.
13 For Pressure Seals used with IGP25 Transmitters, refer to Figures 13, 14, and 15.
14 For Integral Sanitary Process Connectors and Accessories, refer to Figure 16.
15 For Integral Pulp and Paper Process Connectors and Accessories, refer to Figure 17.
16 For Recommended Spare Parts Summary, refer to tables at end of document.
PL 009-011
Page 3
MODEL CODE
Model Code
Description
I/A Series, Multirange, Direct Connected Gauge Pressure Transmitter
Model
IGP25
Electronics Versions and Output Signal
Intelligent; Digital FoxCom and 4 to 20 mA dc, Configurable (Version -D)
Intelligent; Digital HART and 4 to 20 mA (Version -T)
Intelligent; Digital FOUNDATION Fieldbus (Version -F)
-D
-T
-F
Structure Code - Select from one of the following eight groups:
1. Transmitter Only (no seals; see below for flameproof versions)
Connection
Sensor
Fill Fluid
Connection Type
316L ss
316L ss
Silicone
1/2 NPT External Thread, 1/4 NPT Internal Thread
316L ss
316L ss
Inert
1/2 NPT External Thread, 1/4 NPT Internal Thread
22
23
2. Transmitter Prepared for Foxboro Model Coded Seals (see below for flameproof versions) (a)
Transmitter Prepared for Foxboro Direct Connect Seal; Silicone Fill in Sensor (b)
Transmitter Prepared for Foxboro Direct Connect Seal; Inert Fill in Sensor and Seal (b)
Transmitter Prepared for Foxboro Remote Mount Seal; Silicone Fill in Sensor (c)
Transmitter Prepared for Foxboro Remote Mount Seal; Inert Fill in Sensor (c)
D1
D2
S3
S4
3. Transmitters Prepared for non-Foxboro Seals (see below for flameproof versions)
Transmitter Prepared for Remote Seal; Silicone Fill in Sensor (d)
Transmitter Prepared for Remote Seal; Inert Fill in Sensor (e)
SC
SD
4. Transmitter with Sanitary Process Connections (f)
ConnectionDiaphragm
Fluid
316L ss
316L ss
NEOBEE M-20
316L ss
316L ss
NEOBEE M-20
316L ss
316L ss
NEOBEE M-20
316L ss
Nickel alloy (h)
NEOBEE M-20
316L ss
Nickel alloy (h)
NEOBEE M-20
316L ss
Nickel alloy (h)
NEOBEE M-20
316L ss
316L ss
NEOBEE M-20
316L ss
316L ss
NEOBEE M-20
316L ss
316L ss
NEOBEE M-20
Process Connector
1.5-in Tri-Clamp Type, Sanitary (g)
2.0-in Tri-Clamp Type, Sanitary (g)
3.0-in Tri-Clamp Type, Sanitary (g)
1.5-in Tri-Clamp Type, Sanitary (g)
2.0-in Tri-Clamp Type, Sanitary (g)
3.0-in Tri-Clamp Type, Sanitary (g)
Mini Tank Spud Seal, 1 1/2-in ext. (g) (i)
Mini Tank Spud Seal, 6-in ext. (g) (i)
Mini Tank Spud Seal, 9-in ext. (g) (i)
5. Transmitter with Pulp and Paper Process Connections (f)
ConnectionDiaphragm
Fluid
Connection Type
316L ss
316L ss
Silicone
Sleeve Type, 1-inch nominal
316L ss
316L ss
Silicone
Threaded Type, 1-inch nominal
316L ss
316L ss
Silicone
Sleeve Type, 1 1/2-inch nominal
316L ss
316L ss
Silicone
Threaded Type, 1 1/2-inch nominal
316L ss
Nickel alloy (h)
Silicone
Sleeve Type, 1-inch nominal
316L ss
Nickel alloy (h)
Silicone
Threaded Type, 1-inch nominal
316L ss
Nickel alloy (h)
Silicone
Sleeve Type, 1 1/2-inch nominal
316L ss
Nickel alloy (h)
Silicone
Threaded Type, 1 1/2-inch nominal
316L ss
Nickel alloy (h)
Silicone
Threaded Type, 1 1/2-inch nominal
(fits Ametek spud)
6. Flameproof Transmitter Only (no seals)
Connection
Sensor
Fill Fluid
316L ss
316L ss
Silicone
316L ss
316L ss
Inert
Clamps/Gaskets
By User
By User
By User
By User
By User
By User
By Foxboro
By Foxboro
By Foxboro
Clamps/Gaskets
By Foxboro
By Foxboro
By Foxboro
By Foxboro
By Foxboro
By Foxboro
By Foxboro
By Foxboro
By Foxboro
Connection Type
1/2 NPT External Thread, 1/4 NPT Internal Thread
1/2 NPT External Thread, 1/4 NPT Internal Thread
7. Flameproof Transmitter Prepared for Foxboro Model Coded Seals (a)
Flameproof Transmitter Prepared for Direct Connect Seal; Silicone Fill in Sensor (b) (j)
Flameproof Transmitter Prepared for Direct Connect Seal; Inert Fill in Sensor (b) (j)
Flameproof Transmitter Prepared for Remote Mount Seal; Silicone Fill in Sensor (c) (j)
Flameproof Transmitter Prepared for Remote Mount Seal; Inert Fill in Sensor (c) (j)
TA
T2
T3
TB
T4
T5
M1
M6
M9
PA
PB
PC
PD
PE
PF
PG
PH
PJ
52
53
D5
D6
S5
S6
PL 009-011
Page 4
MODEL CODE
Model Code (Continued)
Description
8. Flameproof Transmitter Prepared for non-Foxboro Seals
Flameproof Transmitter Prepared for Remote Seal; Silicone Fill in Sensor (d) (j)
Flameproof Transmitter Prepared for Remote Seal; Inert Fill in Sensor (e) (j)
Span Limits - Absolute or Gauge Pressure Units, as Applicable
MPa
psi bar or kg/cm2
0.0035 and 1.4 0.5 and 2000.035 and 14
0.035 and 14
5 and 20000.35 and 140
Model
SH
SJ
D
E (k)
Conduit Connections and Housing Material
1/2 NPT Connection, Aluminum Housing
PG 13.5 Connection, Aluminum Housing (Available with Electrical Safety Codes E, D, M, N, and P only)
1/2 NPT Connection, 316 ss Housing
PG 13.5 Connection, 316 ss Housing (Available with Electrical Safety Codes E, D, M, N, and P only)
M20 Connection, Aluminum Housing (Available with Electrical Safety Codes E, D, M, N, and P only)
M20 Connection, 316 ss Housing (Available with Electrical Safety Codes E, D, M, N, and P only)
1
2
3
4
5
6
Electrical Safety
ATEX II 1 GD, EEx ia IIC, Zone 0; or II 1/2 GD, EEx ib IIC, Zone 0/1 (Versions D and T only)
ATEX FISCO, II 1 G, EEx ia IIC, Zone 0 (Version F only)
ATEX II 2 GD, EEx d IIC, Zone 1 (l) (m)
ATEX II 3 GD, EEx nL IIC, Zone 2 (Versions D and T only)
ATEX FNICO, II 3 G, EEx nL IIC, Zone 2 (Version F only)
ATEX Multiple Certifications (includes ATEX Codes E and N) (Versions D and T only)
ATEX Multiple Certifications (includes ATEX Codes E, D, and N) (Versions D and T only) (l) (m)
E
E
D
N
N
M
P
CSA Certifications: (n) (o)
Intrinsically Safe, Division 1, Classes I, II, & III; and suitable for Division 2, Classes I, II, & III (Versions D & T only)
Zone Certified intrinsically safe, Ex ia IIC, and energy limited Ex nA II (Version T only)
Explosionproof and dust-ignitionproof, Division I, Classes I, II, and III (All Versions)
CSA Certifications: (l) (m) (o)
Zone certified flameproof, Ex d IIC. Also all certifications of Code C above (All Versions)
CSA Certifications: (p)
Intrinsically safe, Division 1, Classes 1, 2, and 3; and Suitable for Division 2, Classes 1, 2, and 3.
Zone certified Ex ia IIC and Ex nA II (Electronic Version -T only)
FISCO Intrinsically safe, Division 1, Classes I, II, and III (Version -F only)
FNICO Nonincendive, Division 2, Classes I, II, and III (Version -F only)
C
FM Approvals: (n) (o)
Intrinsically Safe, Division 1, Classes I, II, & III; and Nonincendive, Division 2, Class I, II, & III (Versions D & T only)
Zone approved intrinsically safe, AEx ia IIC (Version T only)
Explosionproof and dust-ignitionproof, Division I, Classes I, II, and III (All Versions)
FM Approvals: (l) (m) (o)
Zone approved flameproof, AEx d IIC. Also all certifications of Code F above (All Versions).
FM Approvals: (p)
Intrinsically safe, Division 1, Classes 1, 2, and 3; and Nonincendive, Division 2, Classes 1, 2, and 3.
Zone approved AEx ia IIC and AEx nA II (Electronic Version -T only)
FISCO Intrinsically safe, Division 1, Classes I, II, and III (Version -F only)
FNICO Nonincendive, Division 2, Classes I, II, and III (Version -F only)
F
B
L
G
R
IECEx FISCO, Ex ia IIC, Zone 0; Version F only (o)
IECEx flameproof, Ex d IIC; All Versions (o)
IECEx FNICO, Ex nL IIC, Zone 2; Version F only (o)
T
V
U
SAA intrinsically safe, Ex ia IIC, Zone 0. (Version T only)
SAA nonincendive, Ex n IIC, Zone 2. (Version T only)
H
K
Multi-marked for ATEX, CSA, and FM Intrinsically Safe Applications (with Electronic Version -T/HART only)
W
Optional Selections - see Descriptions below.
Mounting Bracket Set (q) (r)
Painted Steel Bracket with Plated Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only) (s)
Stainless Steel Bracket with Stainless Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only) (s)
Painted Steel Bracket with Plated Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only) (s)
Stainless Steel Bracket with Stainless Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only) (s)
Painted Steel Bracket with Plated Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only) (s)
Stainless Steel Bracket with Stainless Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only) (s)
-M1
-M2
-M3
-M4
-M5
-M6
PL 009-011
Page 5
MODEL CODE
Model Code (Continued)
Description
Digital Indicator with Pushbuttons
Digital Indicator, Pushbuttons, and Window Cover
Vent Screw and Block & Bleed Valve (t)
316 ss Vent Screw in Process Connection
Not available with: Options -G, -X1, and -X2; Pressure Seals; Sanitary and Pulp/Paper Process Connections; and
Nickel alloy (h) Structure Codes 32, 33, 62, and 63
Block and Bleed Valve, Carbon Steel
Block and Bleed Valve, 316 ss
Block and Bleed Valve, 316 ss w/Monel Trim
-V2
-V3
-V4
Electronics Housing Features
External Zero Adjustment
Custody Transfer Lock and Seal
External Zero Adjustment and Custody Transfer Lock and Seal
-Z1
-Z2
-Z3
Cleaning and Preparation
Unit Degreased – for Silicone Filled Sensors only
Not for Oxygen/Chlorine Service, Option -V1 to -V4, or Pressure Seals
Cleaned and Prepared for Oxygen Service – for Inert Filled Sensors only
Not with Option -V1 to -V4 or Pressure Seals
-G
-C1
-C2
-X1
-X2
Seal Surface Finish
15 Ra Seal Surface Finish (g)
-F1
Instruction Books (Common MI, Brochure, and Full Documentation Set on CD-ROM is Standard)
Without Instruction Book and CD - Only “Getting Started” Brochure is supplied
-K1
Miscellaneous Optional Selections
Low Temperature Operative Limit of Electronics Housing Extended Down to -50°C (-58°F) (w)
R 1/2 Process Connection (1/2 NPT to R 1/2 Adapter)
Not available with pressure seals, Nickel alloy (h) Sensors, or sanitary/pulp and paper process connections.
Supplemental Customer Tag (Stainless Steel Tag wired onto Transmitter)
Seventeen Year Warranty (x)
l.
m.
n.
o.
-V1
-A1
-A2
-A3
-A4
Custom Factory Configuration
Digital Output (4 to 20 mA Default if not selected) - available with FoxCom Only (Electronics Version -D)
Full Factory Configuration (requires Configuration Form to be filled out)
h.
i.
j.
k.
-L1
Conduit Thread Adapters (Not with Conduit Connection Codes 5 and 6)
Hawke-Type 1/2 NPT Cable Gland for use with Conduit Connection Codes 1 and 3 (u)
Plastic PG 13.5 Cable Gland for use with Conduit Connection Codes 2 and 4 (v)
M20 Connector for use with Conduit Connection Codes 1 and 3 (u)
Brass PG 13.5 Cable Gland (Trumpet-Shaped) for use with Conduit Connection Codes 2 and 4 (v)
Process Connections
G 1/2 B Manometer Process Connection
Not available with Option -V1, pressure seals, or sanitary and pulp and paper process connections
a.
b.
c.
d.
e.
f.
g.
Model
-J
-R
-T
-W
Both transmitter and pressure seal Model Numbers are required. Refer to PSS 2A-1Z11 A for pressure seal Model Codes.
Direct Mount Seal Models that may be specified are PSTAD, PSFAD, and PSISD.
Remote Mount Seal Models that may be specified are PSFPS, PSFES, PSFAR, PSTAR, PSISR, PSSCR, and PSSSR.
For transmitters with silicone fill prepared for remote seal by others, specify Structure Codes 22 or 52.
For transmitters with Inert fill prepared for remote seals by others, specify Structure Codes 23 or 53.
Accessories used with Sanitary and Pulp and Paper Connections are ordered and supplied separately. See ACCESSORIES section.
Option -F1 (15 Ra seal surface finish) is available with Structure Codes TA, TB, T2 to T5, M1, M6, and M9. The standard seal surface finish is
32 Ra.
Equivalent to Hastelloy® C. Hastelloy is a registered trademark of Haynes International, Inc.
Structure Codes M1, M6, M9 are supplied with clamps and gaskets. All spuds are accessories that are specified by part number.
Requires selection of Electrical Safety Code D.
Not available with Pulp and Paper process connections. Available with Sanitary Process Connections Structure Codes TA, TB, and T2 to T5;
when used with these sanitary Structure Codes, the span limit is limited to 4.2 MPa (600 psi), or the rating of the Tri-Clamp type connector
used, whichever is less.
Only available with flameproof transmitter Structure Codes 52, 53, D5, D6, S5, S6, SH, and SJ.
A cover lock is provided as standard with Electrical Safety Codes D, B, G, and P.
Not available with flameproof transmitter Structure Codes 52, 53, D5, D6, S5, S6, SH, and SJ.
Not available with Sanitary or Pulp/Paper process connections: Structure Codes TA-T5, M1, M6, M9, PA-PJ.
PL 009-011
Page 6
PARTS
p. Only available with Sanitary or Pulp/Paper process connections: Structure Codes TA-T5, M1, M6, M9, PA-PJ.
q. Mounting sets not offered with direct mounted seals, or sanitary and pulp/paper process connections. However, if a direct mounted PSTAD
threaded seal with a 1/4 NPT process connection is used, then a mounting set is recommended.
r. Mounting Bracket Sets -M1 to -M6 are not available with ATEX Electrical Safety Codes D and P
s. Mounting Bracket Sets -M1 to -M6 are available with all transmitter structures.
t. Not available with sanitary and pulp/paper process connections.
u. Available with Electrical Safety Codes E, D, M, N, and P only.
v. Available with Electrical Safety Code E only.
w. Not available with Electronics Version -V or Inert fill in sensor or seal.
x. Standard Warranty is five years.
Parts
Figure 1. Transmitter Assembly
ALWAYS A SOLID
COVER ON THIS END
1
2
3
4
5
6
2
7
9
8
17
7
6
15
3
13
15
FLAMEPROOF
SENSOR ASSEMBLY
(Figure 3)
12
18
STANDARD SENSOR
ASSEMBLY (Figure 2)
SEE NOTE BELOW
11
10
SEE FIGURE 4
FOR OPTIONAL
LCD INDICATOR
Table 1. Parts for Figure 1
Part No.
Qty.
Part Name
1
Table 1
2
Cover, Electronics Housing
2
*3
X0118CC
1
Grease, Lubriplate (1-3/4 ounce tube)
X0201FC
2
O-Ring, Cover
Below
4
Screw, Terminal Block Assy, 0.138-32 x 0.750
4
5
1
X0133UW
Steel Screw - used with Aluminum Housing
X0133VP
316 ss Screw - used with 316 ss Housing
Below
2
(WINDOW COVER
WITH OPTIONAL
LCD INDICATOR,
SEE FIGURE 4)
14
Item
SOLID COVER
1
Terminal Block Assembly
D0149YB
Electronics Versions -D and -T
D0149HN
Electronics Version -F
PL 009-011
Page 7
PARTS
Table 1. Parts for Figure 1 (Continued)
Item
Part No.
6
7
8
P0177JE
9
Qty.
1
D0162VJ
2
Screw Assembly, Earth (Ground), 0.164-32 x 0.750
X0144KR
1
O-Ring
Below
1
Pipe Plug for Unused Housing Conduit Connection – see WARNING
on next page
Pipe Plug, Aluminum, 1/2 NPT; with Housing Code 1
B0139CA
*10
11
*12
Part Name
Cable, Power, Replaceable (Version -F only)
B0139SK
Pipe Plug, 316 ss, 1/2 NPT; with Housing Code 3
X0178GT
Pipe Plug, 316 ss, PG 13.5; with Housing Codes 2 and 4
D0179FJ
Pipe Plug, Aluminum, M20; with Housing Code 5
D0179FK
Pipe Plug, 316 ss, M20; with Housing Code 6
Below
1
Electronics Module
D0162UJ
Digital FoxCom or 4 to 20 mA (Version -D)
D0162UL
Digital HART and 4 to 20 mA (Version -T)
D0162UN
Digital FOUNDATION Fieldbus (Version -F)
D0197PS
1
Clip, Retention
Below
1
Transmitter Replacement Sensor Assembly
Figure 2
Standard Transmitter (not flameproof)
Figure 4
Sanitary or Pulp/Paper Transmitters
*13
Figure 3
1
Flameproof Transmitter Replacement Sensor Assembly
14
S0102BT
1
Plug, Poly (remove prior to Transmitter Installation)
15
Below
2
Screw, Captive, Pan Head, 0.138-32 x 0.615
D0162VM
Steel Screw - used with Aluminum Housing
D0166CY
316 ss Screw - used with 316 ss Housing
16
–
17
18
X0173YA
1
Washer, Ext. Ground, 0.196 ID, 0.383 OD
X0174EK
1
Screw, Button Head; 0.164-32 x 0.25 long
–
Item 16 is intentionally not used
NOTE
For replacement sensor assemblies with sanitary or pulp and paper process connections, see
Figure 4. Also see Figures 16 and 17 for vented housing with a membrane breather plug used only
with the IGP25 Transmitter (Span Limit Code D only) having sanitary or pulp and paper
process connections.
PL 009-011
Page 8
PARTS
Table 2. Housing Covers (Item 1) for Electronics Versions -D, -T, and -F
Part Numbers for Electronics Housing covers
Aluminum Housing
Stainless Steel Housing
Option -L1
See Note (a)
Field Wiring End
Electronics End
Field Wiring End
Electronics End
NO
YES
D0162AP (b)
D0162AP (b)
D0162AP (b)
D0162LH (c)
D0162VD (b)
D0162VD (b)
D0162VD (b)
D0162VH (c)
a. Option -L1 provides the user with an LCD indicator along with a window cover. See Figure 4.
b. Blind (solid) cover.
c. Optional window cover with optional LCD indicator. See Figure 4.
! WARNING
To maintain IP66 (IEC 529) and NEMA 4X protection, unused conduit opening must be closed with
a metal plug. In addition, the threaded housing covers must be properly installed.
Figure 2. Transmitter Replacement Sensor Assembly
(See Figure 3 for Flameproof Transmitter Replacement Sensor Assemblies)
(See Figure 4 for Replacement Sensor Assemblies for Transmitters with
Sanitary or Pulp and Paper Process Connections)
TYPICAL
2
1
! WARNING
Failure to install the
proper Housing
Neck O-Ring (Item
1) for CSA-labeled
products violates
ANSI/ISA 12.27.01
STANDARD
0.500-14 NPT
CONNECTION
OPTION -G
G 1/2 B
CONNECTION
(MANOMETER)
OPTION -V1
0.500-14 NPT
CONNECTION
WITH VENT SCREW
Table 3. Parts for Figure 2
Item
*1
Part No.
Qty.
Below
1
X0201LY
X0118CC
O-Ring, Housing Neck
O-Ring, Standard
X0144KW
2
Part Name
O-Ring for use with CSA Certifications only; see WARNING
A/R
Lubricant
PL 009-011
Page 9
PARTS
316L ss Sensor, Silicone Oil Fill, 316L ss Process Connection
Part Number
Reference Model Code
Maximum Span
D0185CA
D0179RR
D0179GW
D0185CB
D0179RS
D0180HA
IGP25-.22D
IGP25-.22D..-G
IGP25-.22D..-V1
IGP25-.22E
IGP25-.22E..-G
IGP25-.22E..-V1
1.4 MPa (200 psig)
1.4 MPa (200 psig)
1.4 MPa (200 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
316L ss Sensor, Inert Oil Fill, 316L ss Process Connection
Part Number
Reference Model Code
Maximum Span
D0185CC
D0179RT
D0179HB
D0185CD
D0179RU
D0179HC
IGP25-.23D
IGP25-.23D..-G
IGP25-.23D..-V1
IGP25-.23E
IGP25-.23E..-G
IGP25-.23E..-V1
1.4 MPa (200 psig)
1.4 MPa (200 psig)
1.4 MPa (200 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
PL 009-011
Page 10
PARTS
Figure 3. Flameproof Transmitter Replacement Sensor Assembly
(See Figure 2 for Transmitter (not flameproof) Replacement Sensor Assemblies)
(See Figure 4 for Replacement Sensor Assemblies for Transmitters with
Sanitary or Pulp and Paper Process Connections)
TYPICAL
2
1
! WARNING
Failure to install the
proper Housing Neck
O-Ring (Item 1) for
CSA-labeled
products violates
ANSI/ISA 12.27.01
STANDARD
0.500-14 NPT
CONNECTION
OPTION -G
G 1/2 B
CONNECTION
(MANOMETER)
OPTION -V1
0.500-14 NPT
CONNECTION
WITH VENT SCREW
Table 4. Parts for Figure 3
Item
*1
2
Part No.
Below
Qty.
1
Part Name
O-Ring, Housing Neck
X0201LY
O-Ring, Standard
X0144KW
O-Ring for use with CSA Certifications only; see WARNING
X0118CC
A/R
Lubricant
316L ss Sensor, Silicone Oil Fill, 316L ss Process Connection
Part Number
Reference Model Code
Maximum Span
D0179RZ
D0179VB
D0179XK
D0179SA
D0179VC
D0179XL
IGP25-.52D
IGP25-.52D..-G
IGP25-.52D..-V1
IGP25-.52E
IGP25-.52E..-G
IGP25-.52E..-V1
1.4 MPa (200 psig)
1.4 MPa (200 psig)
1.4 MPa (200 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
PL 009-011
Page 11
PARTS
316L ss Sensor, Silicone Oil Fill, 316L ss Process Connection
Part Number
Reference Model Code
Maximum Span
D0179SB
D0179VD
D0179XM
D0179SE
D0179VE
D0179XN
IGP25-.53D
IGP25-.53D..-G
IGP25-.53D..-V1
IGP25-.53E
IGP25-.53E..-G
IGP25-.53E..-V1
1.4 MPa (200 psig)
1.4 MPa (200 psig)
1.4 MPa (200 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
14 MPa (2000 psig)
Figure 4. Replacement Sensor Assemblies for Transmitters with Sanitary or Pulp and
Paper Process Connections
(See Figure 2 for Transmitter Replacement Sensor Assemblies - not Flameproof)
(See Figure 3 for Flameproof Transmitter Replacement Sensor Assemblies)
IGP25 REPLACEMENT SENSOR ASSEMBLIES - SPAN LIMIT CODE D
VENT
TUBE TO
MEMBRANE
PLUG ON
HOUSING.
SEE BELOW.
SANITARY
PULP/PAPER
PULP/PAPER
SANITARY
IGP25 REPLACEMENT SENSOR ASSEMBLIES - SPAN LIMIT CODE E
(ONLY AVAILABLE WITH SANITARY STRUCTURES TA, TB, AND T2 TO T5)
SANITARY
SANITARY
PL 009-011
Page 12
PARTS
IGP25 Sanitary and Pulp/Paper Transmitters - Configurations Offered (a)
Span Limit
Code
Used with Sanitary
Structure Codes
Used with Pulp/Paper
Structure Codes
D
All Sanitary Structure Codes
E
TA, TB, and T2 to T5 only (b)
All Pulp/Paper
Structure Codes
Not available
Vent Tube to Membrane Breather Plug on
Housing
Used with Sanitary and Pulp/Paper
Transmitters.
Vent Tube not required; no breather plug in
housing.
a. Also refer to “Model Code” on page 3.
b. When used with Span Limit Code E, limit is 4.2 MPa (600 psi), or the rating of the Tri-Clamp type connector used, whichever is less.
NOTE
Seals provided with all IGP25 Sanitary Transmitter Structure Codes have a seal surface finish of 32
Ra. Seals with IGP25 Sanitary Transmitter Structure Codes TA, TB, T2 to T5, M1, M6, and M9 can
be provided with a seal surface finish of 15 Ra when Option -F1 is selected.
IGP25 Transmitters - Pulp and Paper Process Connections
Replacement Sensor Assemblies - 316L ss Process Connection; Silicone Fill
Reference IGP25
Model Number
Part Number
Diaphragm Material
Maximum Span
IGP25-.PAD
IGP25-.PBD
IGP25-.PCD
IGP25-.PDD
IGP25-.PED
IGP25-.PFD
IGP25-.PGD
IGP25-.PHD
IGP25-.PJD
D0186TV
D0186TX
D0186TZ
D0186UB
D0186UD
D0186UF
D0186UH
D0186UK
D0186UM
316L ss
316L ss
316L ss
316L ss
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
a. Equivalent to Hastelloy C.
PL 009-011
Page 13
PARTS
IGP25 Transmitters - Sanitary Process Connections - Seal Surface Finish is 32 Ra.
Replacement Sensor Assemblies - 316L ss Process Connection; NEOBEE M-20 Fill
Reference IGP25
Model Number
Part Number
Diaphragm Material
Maximum Span
IGP25-.TAD
IGP25-.TAE
IGP25-.T2D
IGP25-.T2E
IGP25-.T3D
IGP25-.T3E
IGP25-.TBD
IGP25-.TBE
IGP25-.T4D
IGP25-.T4E
IGP25-.T5D
IGP25-.T5E
IGP25-.M1D
IGP25-.M6D
IGP25-.M9D
D0186TA
D0186TB
D0186TC
D0186TD
D0186TE
D0186TF
D0186TG
D0186TH
D0186TJ
D0186TK
D0186TL
D0186TM
D0186TN
D0186TP
D0186TQ
316L ss
316L ss
316L ss
316L ss
316L ss
316L ss
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
316L ss
316L ss
316L ss
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
a. Equivalent to Hastelloy C.
IGP25 Transmitters - Sanitary Process Connections - Seal Surface Finish is 15 Ra.
Replacement Sensor Assemblies - 316L ss Process Connection; NEOBEE M-20 Fill
Reference IGP25
Model Number
Part Number
Diaphragm Material
Maximum Span
IGP25-.TAD..-F1
IGP25-.TAE..-F1
IGP25-.T2D..-F1
IGP25-.T2E..-F1
IGP25-.T3D..-F1
IGP25-.T3E..-F1
IGP25-.TBD..-F1
IGP25-.TBE..-F1
IGP25-.T4D..-F1
IGP25-.T4E..-F1
IGP25-.T5D..-F1
IGP25-.T5E..-F1
IGP25-.M1D..-F1
IGP25-.M6D..-F1
IGP25-.M9D..-F1
D0197LG
D0197LH
D0197LJ
D0197LK
D0197LL
D0197LM
D0197LN
D0197LP
D0197LQ
D0197LR
D0197LS
D0197LT
D0197LU
D0197LV
D0197LW
316L ss
316L ss
316L ss
316L ss
316L ss
316L ss
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
Nickel alloy (a)
316L ss
316L ss
316L ss
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
4.2 MPa (600 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
1.4 MPa (200 psi)
a. Equivalent to Hastelloy C.
PL 009-011
Page 14
PARTS
! CAUTION
The IGP25 replacement sensors with Span Limit Code D listed above are for use with electronics
housings having a membrane breather plug. These replacement sensors are distinguishable by
the vent tube shown in Figure 4. Conversely, housings that do not have a membrane breather plug
must be used with sensor assemblies not having a vent tube. For users with an existing IGP25
transmitter with Span Limit Code D, not having a housing with a membrane breather plug, and that
require a replacement sensor assembly, contact Global Customer Support for a replacement
housing assembly with a membrane breather plug.
Figure 5. Optional Liquid Crystal Display (LCD) Digital Indicator Assembly
Optional Selection -L1
5
3
2
1
4
Table 5. Parts for Figure 5
Item
1
*2
3
4
5
Part No.
Below
Qty.
1
Part Name
Cover Assembly with Window - used with LCD Indicator
D0162LH
Aluminum Cover Assembly
D0162VH
Stainless Steel Cover Assembly
D0162LQ
1
X0118CC
A/R
P0177HB
1
0048130
A/R
Indicator Module
Grease, Lubriplate (1-3/4 ounce tube)
Indicator Cable
Grease, Silicone (150 gram tube)
PL 009-011
Page 15
PARTS
Figure 6. Optional Custody Transfer Lock and Seal
Optional Selection -Z2
2
3
3
4
2
1
Table 6. Parts for Figure 6
Item
1
2
3
4
Part No.
Qty.
Part Name
S001806
2
Lead Seal
D0162WM
2
Screw, Lock, 0.164-32
X0118CC
A/R
Grease, Lubriplate (1-3/4 ounce tube)
S001807
A/R
Sealing Wire
Figure 7. Optional Metric Process Connection
(Available with Structure Codes 22, 23, D1, and D2 only)
Optional Selection -R
DIRECT
CONNECTED
TRANSMITTER
(REFERENCE)
1
Table 7. Parts for Figure 7
Item
1
Part No.
X0171ZX
Qty.
1
Part Name
Adapter, Pipe, 316 ss, 1/2 NPT to R 1/2
PL 009-011
Page 16
PARTS
Figure 8. Optional Block and Bleed Valve
(Available with Structure Codes 22, 23, D1, and D2 only)
Optional Selection -V2, -V3, or -V4
DIRECT
CONNECTED
TRANSMITTER
(REFERENCE)
1
Table 8. Parts for Figure 8
Item
1
Part No.
Below
X0172BU
X0172BV
X0172BW
Qty.
1
Part Name
Block and Bleed Valve
Carbon Steel (Optional Selection -V2)
316 ss (Optional Selection -V3)
316 ss Body, Monel Trim, NACE Approved (Optional Selection -V4)
Figure 9. Optional Vent Screw
Optional Selection -V1
1
DIRECT
CONNECTED
TRANSMITTER
(REFERENCE)
Table 9. Parts for Figure 9
Item
1
Part No.
D0161SW
Qty.
1
Part Name
Vent Screw, 316 ss
PL 009-011
Page 17
PARTS
Figure 10. Optional Conduit-Connections
Optional Selections -A1, -A2, -A3, and -A4
1
HAWKE-TYPE CABLE
GLAND (1/2 NPT)
NYLON CABLE
GLAND (PG 13.5)
2
CABLE
GLAND
CABLE
GLAND
1/2 NPT
3
1/2 NPT
PG 13.5
BRASS CABLE
GLAND (PG 13.5)
CABLE
GLAND
M20
(-A1)
4
M20 CONDUIT
CONNECTION (1/2 NPT)
(-A2)
PG 13.5
(-A3)
Table 10. Parts for Figure 10
Item
1
2
3
4
Part No.
Qty.
N7141HX
X0178GU
N7141DX
N7141DW
1
1
1
1
Part Name
Hawke-Type Cable Gland (for 1/2 NPT)
Nylon Cable Gland (for PG 13.5)
Metric Conduit Thread Connection, M20/20 mm (for 1/2 NPT)
Plated Brass Cable Gland (for PG 13.5)
Figure 11. Optional Pipe Mounting Sets
Optional Selection -M1, -M2, -M3, -M4, -M5, and -M6 (See NOTE)
5
4
VERTICAL
PIPE
MOUNTING
NOTE
1
3
2
HORIZONTAL
PIPE MOUNTING
FOR FLAMEPROOF
TRANSMITTERS,
REFER TO FIGURE 12.
(-A4)
PL 009-011
Page 18
PARTS
Table 11. Parts for Figure 11
Optional Selections -M1, -M3, and -M5 (Painted Steel)
Item
Part No.
Qty.
Part Name
–
Below
B0188DL
D0166AP
D0179FN
–
Mounting Bracket Set; Options -M1, -M3, and -M5
Option -M1, Aluminum Housing; 1/2 NPT Connections
Option -M3, Aluminum Housing; PG 13.5 Connections
Option -M5, Aluminum Housing; M20 Connections
1
2
3
N0141ZW
D0114SM
0011962
1
1
2
Bracket, Mounting, painted steel
U-Bolt, Steel
Nut, Hex Head, plated cs, 0.312-18
4
Below
B0188DN
D0166AM
D0179FM
1
Adapter Plug
1/2 NPT to 0.375-24, ss, Option -M1
PG 13.5 to 0.375-24, ss, Option -M3
M20 to 0.375-24, ss, Option -M5
5
X0116FB
1
Screw, Hex Head, plated cs, 0.375-24 x 0.625
Optional Selection -M2, -M4, and -M6 (Stainless Steel)
Item
Part No.
Qty.
Part Name
–
Below
N1207AE
D0166AN
D0179FP
–
Mounting Bracket Set; Options -M2, -M4, and -M6
Option -M2, 316 ss Housing; 1/2 NPT Connections
Option -M4, 316 ss Housing; PG 13.5 Connections
Option -M6, 316 ss Housing; M20 Connections
1
2
3
N1205MF
N1205MX
Z1217HV
1
1
2
Bracket, Mounting, stainless steel
U-Bolt, stainless steel
Nut, Hex Head, ss, 0.312-18
4
Below
B0188DN
D0166AM
D0179FM
P0120RM
1
Adapter Plug
1/2 NPT to 0.375-24, ss, Option -M2
PG 13.5 to 0.375-24, ss, Option -M4
M20 to 0.375-24, ss, Option -M6
Screw, Hex Head, ss, 0.375-24 x 0.625
5
1
PL 009-011
Page 19
PARTS
Figure 12. Optional Pipe Mounting Sets
Optional Selections -M1 to -M6 for Use with Flameproof Transmitters
FLAMEPROOF
TRANSMITTER WITH
OPTIONS -M1 TO -M6
1
2
4
5
3
Table 12. Parts for Table 12
Optional Selections -M1 to -M6
(Refer to Figure 11 for part numbers of Items 1 to 5)
Item
Part No.
Qty.
Part Name
–
Below
B0188DL
D0166AP
D0179FN
1
Mounting Bracket Set; Painted Steel; Options -M1, -M3, and -M5
Option -M1, Aluminum Housing; 1/2 NPT Connections
Option -M3, Aluminum Housing; PG 13.5 Connections
Option -M5, Aluminum Housing; M20 Connections
–
Below
N1207AE
D0166AN
D0179FP
1
Mounting Bracket Set; Stainless Steel; Options -M2, -M4, and -M6
Option -M2, 316 ss Housing; 1/2 NPT Connections
Option -M4, 316 ss Housing; PG 13.5 Connections
Option -M6, 316 ss Housing; M20 Connections
PL 009-011
Page 20
PARTS
Figure 13. Pressure Seals for Use with IGP25 Transmitters (Page 1)
NOTE
The pressure seals shown below are used with IGP25 Transmitters. Pressure seals are not
replaceable items; they must be replaced with the entire transmitter/seal assembly. In this case,
both transmitter and pressure seal Model Numbers must be used for the assembled
transmitter/seal system. Refer to data plates attached to transmitter and pressure seal(s) for
applicable part numbers, or refer to PSS 2A-1Z11 A for Pressure Seal Model Codes.
FIELD
TERMINALS
MODEL PSISR
RECESSED DIAPHRAGM-IN-LINE SADDLE WELD
REMOTE MOUNT SEAL
CAPILLARY
CONNECTION
WELDED TO
TRANSMITTER
EIGHT BOLTS FOR
ATTACHING UPPER
HOUSING TO LOWER
HOUSING
EIGHT BOLTS FOR
ATTACHING UPPER
HOUSING TO LOWER
HOUSING
4-INCH
PROCESS
PIPE AND
LARGER
IN-LINE SADDLE WELD
THE LOWER HOUSING
TO PROCESS PIPE PRIOR
TO ASSEMBLING UPPER
HOUSING TO LOWER
HOUSING.
3-INCH (BUT
LESS THAN
4-INCH)
PROCESS
PIPE.
FIELD
TERMINALS
MODEL PSSSR
SANITARY, DIRECT CONNECT TO STANDARD OR MINI SPUD
REMOTE MOUNT SEAL
CAPILLARY
CONNECTION
WELDED TO
TRANSMITTER
CAPILLARY
CONNECTION
WELDED TO
SEAL
TRI-CLAMP CONNECTION
SPUD
EXTENSION
VARIES WITH
SPUD SIZE
PL 009-011
Page 21
PARTS
Figure 14. Pressure Seals for Use with IGP25 Transmitters (Page 2)
MODEL PSFAR
RECESSED DIAPHRAGM-FLANGED CONNECTION
REMOTE MOUNT SEALS
FIELD
TERMINALS
FIELD
TERMINALS
MODELS PSFPS AND PSFES
FLUSH DIAPHRAGM-FLANGED CONNECTION
REMOTE MOUNT SEALS
CAPILLARY
CONNECTION
WELDED TO
TRANSMITTER
PSFPS HAS
FLUSH
DIAPHRAGM
PSFES HAS
EXTENDED
FLUSH
DIAPHRAGM
CAPILLARY
CONNECTION
WELDED TO
TRANSMITTER
USER SUPPLIED
FLANGE BOLTS
CONNECT TO
PROCESS FLANGE
WHEN SEAL HAS
A 2.4 OR 3.0 INCH
DIAPHRAGM
FOUR STUDS FOR CONNECTION
TO PROCESS FLANGE WHEN SEAL
HAS A 4.0 INCH DIAPHRAGM
FIELD
TERMINALS
CAPILLARY
CONNECTION
WELDED TO
TRANSMITTER
MODEL PSSCR
FLUSH DIAPHRAGM
SANITARY TRI-CLAMP
REMOTE MOUNT SEAL
FIELD
TERMINALS
MODEL PSTAR
RECESSED DIAPHRAGM
THREADED CONNECTION
REMOTE MOUNT SEAL
CAPILLARY
CONNECTION
WELDED TO
TRANSMITTER
USER-SUPPLIED
O-RING AND
TRI-CLAMP
(REFERENCE)
SIX BOLTS FOR
ATTACHING UPPER
HOUSING TO LOWER
HOUSING
3.0 OR 4.0 in.
DIAPHRAGM
INTERNALLY
THREADED
NPT PROCESS
CONNECTION
PROCESS PIPE
(REFERENCE)
PL 009-011
Page 22
PARTS
Figure 15. Pressure Seals for Use with IGP25 Transmitters (Page 3)
FIELD
TERMINALS
FIELD
TERMINALS
FIELD
TERMINALS
MODELS PSFAD, PSTAD, AND PSISD DIRECT CONNECT SEALS
1/2 NPT
CONNECTION
1/2 NPT
CONNECTION
1/2 NPT
CONNECTION
PSFAD
BOLT MOUNT
PSTAD
THREADED CONNECTION
FIELD
TERMINALS
FIELD
TERMINALS
PSFAD
STUD MOUNT
1/2 NPT
CONNECTION
1/2 NPT
CONNECTION
PSISD
3-INCH PIPE
PSISD
4-INCH PIPE
PL 009-011
Page 23
PARTS
Figure 16. Integral Sanitary Process Connectors for Use with IGP25 Transmitters
NOTE
The integral sanitary process connectors shown below are used with IGP25 Transmitters. Refer to
Figure 4 for replacement sensor assemblies, and to pages that follow for accessories used with
these transmitters.
TRANSMITTER WITH INTEGRAL
SANITARY TRI-CLAMP
PROCESS CONNECTOR
MEMBRANE
BREATHER
PLUG, TYPICAL.
TRANSMITTER WITH INTEGRAL
MINI TANK SPUD SEAL
TRI-CLAMP CONNECTOR
STRUCTURE
CODES
TA, T2, T3,
TB, T4, T5
STRUCTURE
CODES
M1, M6, M9
OPTIONAL
EXTERNAL
ZERO
ADJUSTMENT
2 1/2 in
TRI-CLAMP
1 1/2 , 2, OR 3 in
TRI-CLAMP
1 1/2, 6, OR 9 in
EXTENSION
Table 13. Parts for Figure 16
Item
1
Part No.
Qty.
1
D0186DR
Part Number
Membrane Breather Plug
(for use with Span Limit Code D only)
Accessories
Configuration of Mini Tank Spuds, Weld Spuds, Heat Sinks/Plugs, and Calibration Adapters
MINI
TANK
SPUDS
MINI
TANK
SPUDS
3.047
3.047
2.135
2.135
Spud Extension
Structure
Spud Extension
Structure
Part No.
A
Code Code
Part No.
A
1.50
A A N1212GG
N1212GG
1.50
N1214BP
6.00 6.00
N1214BP
N1214BQ
9.00 9.00
N1214BQ
2.155
2.155
3.73
3.73
M1
M6
M9
M1
M6
M9
PL 009-011
Page 24
PARTS
Table 14. Tri-Clamp Type Connector Part Numbers (a)
Nominal Tube O.D.
MWP at 70°F
MWP at 250°F
Part Number
1.5 in Tube
2 in Tube
3 in Tube
1.5 in Tube
2 in Tube
2.5 in Tube
3 in Tube
4 in Tube
1.5 in Tube
2 in Tube
4 in Tube
500 psi
450 psi
350 psi
600 psi
550 psi
450 psi
350 psi
300 psi
1500 psi
1000 psi
800 psi
300 psi
300 psi
195 psi
300 psi
275 psi
225 psi
175 psi
150 psi
1200 psi
800 psi
600 psi
N1212DA
N1212DB
N1212DC
N1212PP
N1212PQ
N1212HG (b)
N1212PR
N1212PS
N1212FV
N1212FW
N1212AW
a. Tri-Clamps are generally supplied by user but can be ordered from Global Customer Support.
b. The Foxboro N1212HG Tri-Clamp Type Connector for a 2.5 in tube is used with Mini Tank Spud Connectors M1, M6, and M9.
Table 15. Package of O-ring Supplied by Foxboro (a)
Structure
Code
M1, M6, M9
Description
O-Rings
Application
For use with Mini Tank Spud Connector
Part Number
N1212LB
a. Part number is for a package of five O-rings. Each transmitter is shipped with its required O-rings. This package of O-rings is
recommended extras or spares.
PL 009-011
Page 25
PARTS
Figure 17. Integral Pulp and Paper Process Connectors for Use with IGP25 Transmitters.
NOTE
The integral pulp and paper process connectors shown below are used with IGP25 Transmitters.
Refer to Figure 4 for replacement sensor assemblies, and to pages that follow for accessories used
with these transmitters.
TRANSMITTER WITH INTEGRAL
PULP AND PAPER THREADED
TYPE CONNECTOR
TRANSMITTER WITH INTEGRAL
PULP AND PAPER SLEEVE
TYPE CONNECTOR
MEMBRANE
BREATHER
PLUG, TYPICAL.
1
(TYPICAL)
OPTIONAL
EXTERNAL
ZERO
ADJUSTMENT.
HEX HEAD
1 inch
SLEEVE TYPE
HEX HEAD
1 3/12 - 20 OR
M44 x 1.25
OR 1 1/2 -18
O-RING
GROOVES
WELD
SPUD
WELD SPUD
TAPERED HEAD
1 1/2 inch
SLEEVE TYPE
WELD
SPUD
VESSEL
WALL
WELD
VESSEL WALL
WELD
O-RING
GASKET
Table 16. Parts for Figure 17
Item
1
Part No.
D0186DR
Qty.
1
Part Number
Membrane Breather Plug
(for use with Span Limit Code D only)
PL 009-011
Page 26
PARTS
Configuration of Weld Spuds, Heat Sinks/Plugs, and Calibration Adapters
WELD SPUD - N1214MM (a)
WELD SPUD - N1214LH (a)
0.32 DIA. TWO PLACES
1.02
1.00
1.59
1.05
1.90
1.315
(a) Used with Structure Codes PC, PG
(a) Used with Structure Codes PA, PE
C
WELD SPUDS
Part No. (a)
N1214XW
N1214LG
N1216AM
B
B
Thread
C
1.50
2.12
1.99
0.80
0.80
1.00
1 3/32-20
M44 x 1.25
1 1/2-18
Struct.
Code
PB, PF
PD, PH
PJ
a. Must be used with heat sinks/plugs below to prevent metal
distortion due to high temperature of welding process.
A
HEAT SINKS/PLUGS
A
A
Part No. (a)
0.28
C
1.15
0.40
N1214Y
N1214YR
N1216AP
A
B
Thread
C
1.125
1.75
1.75
1.000
1.595
1.595
1 3/32 - 20
M44 x 1.25
1 1/2-18
Struct.
Code
PB, PF
PD, PH
PJ
a. Must be used with weld spuds above to prevent metal
distortion due to high temperature of welding process.
B
THREADED-TYPE
CALIBRATION ADAPTERS
C
Part No.
B
N1214XX
N1216AN (a)
A
B
1.50
1.99
1.50
1.75
Thread
C
1 3/32-20
1 1/2-18
Struct.
Code
PB, PF
PJ
a. For Ametak spud.
1/4 NPT
A
SLEEVE-TYPE
CALIBRATION ADAPTERS
THREADED-TYPE
CALIBRATION ADAPTER - N1214MN (a)
A
B
WRENCH FLATS
1.05
1/4 NPT
2.20
0.28
1.50
C
Part No.
A
B
C
1/4 NPT
Struct.
Code
N1214MG
1.90
1.60
1.62
PA, PE
N1216MP
1.315
1.05
1.05
PC, PG
0.76
M44 x 1.25
2.12
(a) Used with Structure Codes PD, PH
PL 009-011
Page 27
PARTS
Accessories
Table 17. Weld Spuds, Calibration Adapters, Heat Sinks/Plugs, O-Rings, and Gaskets
used with Threaded and Sleeve Type Process Connectors
Description of Accessory (a)
For use with 1-inch Sleeve Type Connector
Weld Spud
Calibration Adapter
Process O-Ring at Diaphragm (Viton), 1-in Sleeve
Process O-Ring, Outer (Viton), 1-in Sleeve
For use with 1-inch Flush, Threaded Type Connector
Weld Spud (e)
Heat Sink/Plug (e)
Calibration Adapter
Process Gasket (Gylon)
For use with 1.5-inch Sleeve Type Connector
Weld Spud
Calibration Adapter
Process O-Ring (Viton)
For use with 1.5-inch Flush, Threaded Type Connector
Weld Spud (e)
Heat Sink/Plug (e)
Calibration Adapter
Process Gasket (Gylon)
For use with 1.5-inch Threaded Type Connector for Ametek Spud
Weld Spud (e)
Heat Sink/Plug (e)
Calibration Adapter
Process Gasket (Gylon)
a.
b.
c.
d.
Used with
Structure Code
Part Number (b)
PA, PE
PA, PE
PA, PE
PA, PE
N1214LH (c)
N1214MP (c)
N1214YY (d)
N1214YZ (d)
PB, PF
PB, PF
PB, PF
PB, PF
N1214XW (c)
N1214YS (c)
N1214XX (d)
N1214YX (d)
PC, PG
PC, PG
PC, PG
N1214MM (c)
N1214MQ (c)
N1214YW (d)
PD, PH
PD, PH
PD, PH
PD, PH
N1214LG (c)
N1214YR (c)
N1214MN (c)
N1214YV (d)
PJ
PJ
PJ
PJ
N1216AM
N1216AP
N1216AN
N1216AQ (d)
Accessories are ordered and supplied separately.
Refer to Figure 17 for configuration and dimensions of certain accessories listed.
Weld spuds, heat sinks/plugs, and calibration adapters are supplied by user.
Each transmitter is shipped with its required gaskets or O-rings. Part number is for a package of five O-rings or gaskets. The gaskets and
O-rings listed are offered as extras (spares).
e. When ordering a weld spud for use with a threaded type connector, note that use of a heat sink/plug is required to prevent metal distortion
due to the high temperature of the welding process.
PL 009-011
Page 28
RECOMMENDED SPARE PARTS SUMMARY
Recommended Spare Parts Summary
Number of Parts
Recommended for
Figure
Number
Item
Number
Figure 1
3
10
Part
Number
X0201FC
Below
D0162UJ
D0162UL
D0162UN
O-Ring, Cover
Electronics Module
Digital FoxCom or 4 to 20 mA (Code –D)
Digital HART and 4 to 20 mA (Code –T)
Digital FOUNDATION Fieldbus (Code –F)
Transmitter Sensor Assembly
12
Reference Model Code
(Also see Below
IGP25-.22D
Figure 2)
D0185CA
IGP25-.22D..-G
D0179RR
IGP25-.22D..-V1
D0179GW
IGP25-.22E
D0185CB
IGP25-.22E..-G
D0179RS
IGP25-.22E..-V1
D0180HA
D0185CC
D0179RT
D0179HB
D0185CD
D0179RU
D0179HC
13
(Also see Below
Figure 3)
D0179RZ
D0179VB
D0179XK
D0179SA
D0179VC
D0179XL
D0179SB
D0179VD
D0179XM
D0179SE
D0179VE
D0179XN
Figure 1
Part Name
12
(Also see Below
Figure 4)
D0186TA
D0186TB
D0186TC
D0186TD
D0186TE
D0186TF
D0186TG
D0186TH
D0186TJ
D0186TK
D0186TL
D0186TM
D0186TN
D0186TP
D0186TQ
IGP25-.23D
IGP25-.23D..-G
IGP25-.23D..-V1
IGP25-.23E
IGP25-.23E..-G
IGP25-.23E..-V1
Flameproof Transmitter Sensor Assembly
Reference Model Code
IGP25-.52D
IGP25-.52D..-G
IGP25-.52D..-V1
IGP25-.52E
IGP25-.52E..-G
IGP25-.52E..-V1
IGP25-.53D
IGP25-.53D..-G
IGP25-.53D..-V1
IGP25-.53E
IGP25-.53E..-G
IGP25-.53E..-V1
IGP25 Sanitary Transmitter Sensor Assembly
(Reference Model Code)
IGP25-.TAD
IGP25-.TAE
IGP25-.T2D
IGP25-.T2E
IGP25-.T3D
SEAL
IGP25-.T3E
SURFACE
IGP25-.TBD
FINISH
IGP25-.TBE
IS
IGP25-.T4D
32
Ra
IGP25-.T4E
IGP25-.T5D
IGP25-.T5E
IGP25-.M1D
IGP25-.M6D
IGP25-.M9D
1
Inst.
5
Inst.
20
Inst.
0
0
2
1
4
1
0
1
1
0
1
1
0
1
1
PL 009-011
Page 29
RECOMMENDED SPARE PARTS SUMMARY
Recommended Spare Parts Summary (Continued)
Number of Parts
Recommended for
Figure
Number
Item
Number
Figure 1
12
(Also see Below
Figure 4)
D0197LG
D0197LH
D0197LJ
D0197LK
D0197LL
D0197LM
D0197LN
D0197LP
D0197LQ
D0197LR
D0197LS
D0197LT
D0197LU
D0197LV
D0197LW
12
(Also see Below
Figure 4)
D0186TV
D0186TX
D0186TZ
D0186UB
D0186UD
D0186UF
D0186UH
D0186UK
D0186UM
1
Below
X0201LY
X0144KW
1
Below
X0201LY
X0144KW
2
D0162LQ
1
D0186DR (a)
1
D0186DR (a)
Figure 1
Figure 2
Figure 3
Figure 5
Figure 16
Figure 17
Part
Number
Part Name
IGP25 Sanitary Transmitter Sensor Assembly
(Reference Model Code)
IGP25-.TAD..-F
IGP25-.TAE..-F
IGP25-.T2D..-F
IGP25-.T2E..-F
IGP25-.T3D..-F
IGP25-.T3E..-F
IGP25-.TBD..-F
SEAL
IGP25-.TBE..-F
SURFACE
IGP25-.T4D..-F
FINISH
IGP25-.T4E..-F
IS
IGP25-.T5D..-F
15
Ra
IGP25-.T5E..-F
IGP25-.M1D..-F
IGP25-.M6D..-F
IGP25-.M9D..-F
IGP25 Pulp/Paper Transmitter Sensor Assy (Reference
Model Code)
IGP25-.PAD
IGP25-.PBD
IGP25-.PCD
IGP25-.PDD
IGP25-.PED
IGP25-.PFD
IGP25-.PGD
IGP25-.PHH
IGP25-.PJD
O-Ring, Housing Neck
Standard
For use with CSA Certifications only.
O-Ring, Housing Neck
Standard
For use with CSA Certifications only.
LCD Indicator Module
Plug, Membrane Breather
Plug, Membrane Breather
1
Inst.
5
Inst.
20
Inst.
0
1
1
0
1
1
1
2
4
1
2
4
0
0
0
1
2
2
1
4
4
a. Breather plugs are only used with Sanitary and Pulp and Paper process connections having Span Limit Code D.
PL 009-011
Page 30
RECOMMENDED ACCESSORIES FOR USE WITH
INTEGRAL SANITARY PROCESS CONNECTORS
Recommended Accessories for Use With Integral Sanitary Process Connectors
Number of Parts
Recommended for
Figure
Number
Table
Number
Part
Number
-
Table 15
Below
N1212LB
Part Name
O-Rings (a)
O-Ring; used with Mini Tank Spud
1
Inst.
5
Inst.
20
Inst.
1
2
4
a. Part number is for a package of five O-rings. Although each transmitter is shipped with its required O-rings, additional O-rings are
recommended as spares.
Recommended Accessories for Use With Integral Pulp and Paper Process Connectors
Number of Parts
Recommended for
Figure
Table
Number Number
-
Part
Number
Part Name
O-Rings and Gaskets (a)
Table 17 Below
Process O-ring at Diaphragm; 1-in Sleeve
N1214YY
Process O-ring outer; 1-in Sleeve
N1214YZ
Process Gasket; 1-in Threaded
N1214YX
Process O-ring; 1.5-in Sleeve
N1214YW
Process Gasket; 1.5-in Threaded
N1214YV
Process Gasket; 1.5 in Threaded
N1216AQ
for Ametek Spud
1
Inst.
5
Inst.
20
Inst.
1
2
4
a. Part number is for a package of five O-rings or gaskets. Although each transmitter is shipped with its required O-rings or gaskets, additional
O-rings and gaskets are recommended as spares.
PL 009-011
Page 31
NOTES
Notes
PL 009-011
Page 32
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
United States of America
http://www.invensys.com
Global Customer Support
Inside U.S.: 1-866-746-6477
Outside U.S.: 1-508-549-2424
Website: http://support.ips.invensys.com
Copyright 2002-2015 Invensys Systems, Inc.
All rights reserved.
Invensys, Foxboro, FoxCom, and I/A Series are trademarks
of Invensys Limited, its subsidiaries, and affiliates. All other
trademarks are the property of their respective owners.
Invensys is now part of Schneider Electric.
0415