Avid Editing Application

Transcription

Avid Editing Application
Avid Editing Application
ReadMe
Revision History
Date
Description
5/13/2015
Updated Fixed title to include v10.5.4.6.
Installation Note
On a Windows® system, if you have already installed a patch on your system, you must first
uninstall the previous patch before installing a new patch.
On a Macintosh system, there is a full installer, not just a patch. You must completely
uninstall the previous Macintosh version.
For details on installing a patch, see the Patch Installer Instructions pdf on the download
page.
Fixed in v6.5.4.6 and v10.5.4.6
The following have been fixed:
➤
Bug Number: MCCET-477. You might have received “Core Consistency Check” errors
when playing back some P2 clips from a Panasonic x800 camera.
➤
Bug Number: MCCET-606. After saving a story in the NRCS Tool, some characters such
as “<< >>” and “&” did not display correctly.
➤
Bug Number: MCCET-60. AMA linking ProRes SD files resulted in an “Exception:
CDCIDescriptor: Unknown component width” error.
2
➤
Bug Number: MCCET-59. After adding a locator to a mixed frame rate AMA clip while in
toggle Source/Record mode, the Timeline zoom would reset.
➤
Bug Number: MCCET-201. In some instances, you could not AMA Link to mp4 files.
➤
Bug Number: MCCET-579. (Interplay) Last Checkin Date and Initial Checkin Date
columns did not display correctly.
➤
Bug Number: MCCET-608. The editing application would crash when importing files with
120+ characters in the file name.
➤
Bug Number: MCCET-595. The system might have crashed if you decreased the video
track size when Clip Frames was enabled in the Timeline fast menu.
➤
Bug Number: MCCET-517. You might have experienced intermittent audio hits when
playing back AMA-linked OP1A files.
➤
Bug Number: MCCET-128. When in Best Performance or Draft quality mode in the
Timeline, you might have seen video artifacts on media that did not display artifacts in
previous versions of the editing application.
➤
Bug Number: MCCET-557. Markers on Data track previously did not import back into
Media Composer.
➤
Bug Number: MCCET-154. You might have received an assertion error when AMA
linking to an XDCAM file greater than 2GB.
➤
Bug Number: MCCET-513. Playing back clips with resolutions listed in the
DisabledRes.txt file resulted in an “unsupported resolution” error. You should be able to
playback resolutions listed in this text file.
➤
Bug Number: MCCET-92. You might have received “An error occurred on event #”
message when importing an ALE if there was a greater than 12 hour timecode gap between
clips.
➤
Bug Number: MCCET-157. When minimizing and then restoring the Interplay Window,
the window did not come into focus. Instead it would open behind other windows in the User
Interface.
➤
Bug Number: MCCET-198. (NewsCutter) The ENPS rundown appeared blank in the
NRCS Tool.
Changed in v6.5.4.5
➤
Bug Number: MCCET-511. In an Interplay environment, checking sequences in and out
took longer than usual.
➤
Bug Number: MCCET-418. In some instances, when a bug created a crash report, multiple
crash report windows were displayed. Now, only one crash report window will be displayed.
➤
Bug Number: MCCET-267. In some instances, it would take an extremely long time to
open a bin.
Changed in v6.5.4.5
Mac OS X v10.9.5 support
This release of the editing application supports Mac OS X v10.9.5.
Fixed in v6.5.4.5 and v10.5.4.5
The following have been fixed:
➤
Bug Number: UDevC00183163. Pan and Zoom effects created in older versions of the
editing application might not have loaded properly in newer versions. In some instances, you
might have received an assertion error.
➤
Bug Number: MCCET-56. (Interplay environment) The BCC effects created by an earlier
version of BCC plug-ins might have resulted in the segments missing in the Timeline after
opening them with BCCv8.2 or later.
➤
Bug Number: MCCET-232. You might have received “Core consistency check” errors
when playing back h.264 proxy media in Media Composer or in Avid Interplay Assist.
➤
Bug Number: MCCET-150. In some instances, double-clicking a clip in the Interplay
Window to load it in the Source monitor would also insert it in the Timeline.
➤
Bug Number: MCCET-101. (Mac) If the “Automatically hide and show the Dock” option
was enabled, the Timeline would shrink to the upper left of the window when you toggled
the Smart Tool.
➤
Bug Number: MCCET-100. If you had Media Services set as a Site Setting, the “Use STP
Encode” option would not be available on new projects.
3
4
➤
Bug Number: MCCET-64. The wrong window might become activated after dragging a
tabbed bin.
➤
Bug Number: MCCET-48. In some instances every 15th frame of an XDCAM50 capture
was distorted.
➤
Bug Number: MCCET-123. (Mac) You might have lost frames and received a
“segmentation fault” error when moving transitions in the Timeline.
➤
Bug Number: UDevC00184514. You could not successfully import markers that crossed
the 00:00:00:00 Timecode.
➤
Bug Number: MCCET-285. (NRCS) Directory shortcuts did not retain their names after
logging in and out of the iNews server.
➤
Bug Number: MCCET-267. In some instances, it would take an extremely long time to
open a bin.
➤
Bug Number: MCCET-258. Information in the video ID column was truncated and did not
display properly in the NRCS Tool.
➤
Bug Number: MCCET-222. Stories with blank titles in iNews did not appear properly in
the NRCS Tool.
➤
Bug Number: MCCET-226. If you have long clip names, moving columns in bin view
resulted in text overlapping.
➤
Bug Number: MCCET-118. AAFs created from the Sony PDZ Content Browser software
would not relink properly.
➤
Bug Number: MCCET-162. If you had Mac Drive installed on your Windows system, the
editing application would freeze when trying to eject a CD.
➤
Bug Number: UDevC00183903. After exporting a file as XDCAM MXF OP1a, if you
reimported the file, the audio tracks would be swapped.
➤
Bug Number: UDevC00182576. Some audio tracks displayed as mono instead of stereo
tracks when AMA linking to J2K.
➤
Bug Number: UDevC00186194. If the path to a QuickTime file was multiple subfolders on
shared storage, it took longer than usual to import the file.
Fixed in v6.5.4.5 and v10.5.4.5
➤
Bug Number: UDevC00177415. Same as source RGB exports displayed YCbCr 601 in the
color space column when AMA linked.
➤
Bug Number: UDevC00183993. (Macintosh) You might have received an assertion error
when playing back AMA linked ProRes movies.
➤
Bug Number: UDevC00185733. In some instances, after performing a record with the
Punch-in tool, the audio was muted.
➤
Bug Number: UDevC00186125. (Video Satellite) Media Composer would become
unresponsive after performing a loop play in Pro Tools.
➤
Bug Number: UDevC00186112, UDevC00182301. Add Edit marks were not available on
5.1 and 7.1 channel audio tracks.
➤
Bug Number: UDevC00186287. The Time Compression Expansion effect did not render
properly.
➤
Bug Number: UDevC00186526. You could not close the Clipboard Monitor after opening
it the second time.
➤
Bug Number: UDevC00185778. Some letters, such as upper case A, V, W, etc, were
clipped when using the SubCap effect.
➤
Bug Number: UDevC00182718. Thumbnails in Bin Frame View looked washed out or
jagged.
➤
Bug Number: UDevC00184943. In some instances, entering an Activation ID resulted in a
successful activation message followed by a window asking you to enter an Activation ID
again.
➤
Bug Number: UDevC00183038. A scroll bar did not always appear when you opened a
folder in the Interplay Window. This might have occurred if you first opened a folder that did
not contain enough items to require a scroll bar. Opening a subsequent folder that did require
a scroll bar did not display one.
➤
Bug Number: UDevC00184430. Performing a Digital Cut to XDCAM with a Black Magic
Decklink 4K, created a black first frame.
➤
Bug Number: UDevC00174704. When Dynamic Relink was enabled, some clips appeared
offline in the Timeline when they were actually online.
5
Fixed in v6.5.4.4 and v10.5.4.4
The following have been fixed:
6
➤
Bug Number: UDevC00178918. You could not print 2 or more copies of a bin in Media
Log.
➤
Bug Number: UDevC00183794. Importing or AMA linking to DVC ProHD QuickTime
might have had the wrong timecode.
➤
Bug Number: UDevC00184196. You might have received “XDCAM: Insufficient free
space” errors when exporting XDCAM OP1a to an UNC path.
➤
Bug Number: UDevC00185451. (NewsCutter NRCS Tool) In some instances, opening
certain stories would cause the editing application to crash.
➤
Bug Number: UDevC00184259. (Symphony Option) In some instances, if you had already
activated your software license, you would be prompted to activate again.
➤
Bug Number: UDevC00184921, UDevC00184920. (NewsCutter) When working with
Armenian Unicode or Tamil Unicode, Story Names in the NRCS Tool appeared as question
marks (?).
➤
Bug Number: UDevC00184890. After moving or copying AMA media to a new drive and
performing a new AMA link, the Drive column in the bin still listed the old location.
➤
Bug Number: UDevC00185506. You might have received an “Assertion failed” error when
performing an Audio Punch-in.
➤
Bug Number: UDevC00184952. When exporting a sequence as OMF 2.0 with “Render
video effects” deselected, you would receive a “Bus Segmentation” error.
➤
Bug Number: UDevC00184156. In some instances, exporting, rendering and mixing down
video can produce video levels that are reserved for timing signals according to SMPTE
296M and SMPTE 274M. A fix has been implemented that prohibits producing these values
on decode.
➤
Bug Number: UDevC00184747. The editing application would crash when trying to
transcode H.264 MP4 files.
➤
Bug Number: UDevC00185357. You might have received “Audio Underrun” errors when
playing back complex audio sequences from Shared Storage.
Fixed in v6.5.4.4 and v10.5.4.4
➤
Bug Number: UDevC00183755. When performing a search in the Interplay window, the
Interplay window would go behind other windows in the User interface. The Interplay
window now stays in focus when you perform a search.
➤
Bug Number: UDevC00184308. You might have received an “ADMConsummer and
Legend Audio Communication” error when playing back AMA linked RED clips which
contained audio.
➤
Bug Number: UDevC00184286. The editing application was slow to launch on certain
MacBook Pro systems.
➤
Bug Number: UDevC00182057. When importing a 30fps QuickTime After Effects file, the
first frame of the clip was moved to the last frame.
➤
Bug Number: UDevC00183391. The editing application appeared hung when using the
Normalize AudioSuite effect.
➤
Bug Number: UDevC00185223. You might have received Audio Preload errors playing
back sequences containing AudioSuite effects.
➤
Bug Number: UDevC00184063. In some instances, the editing application would crash if
you changed the field order option in the Import Settings image tab and then imported a
.mov file.
➤
Bug Number: UDevC00183059. You might have experienced audio dropouts when playing
back Edit While Capture clips.
➤
Bug Number: UDevC00183675. In previous releases, you could map a button from the
Command Palette to the HW/SW button on the Timeline. When you restarted the system, it
returned to the HW/SW button. You can no longer map another button to the HW/SW button
on the Timeline.
➤
Bug Number: UDevC00183745. In some instances, sequences that did not contain pan
data would pan when playing back.
➤
Bug Number: UDevC00184066. AVI files did not import properly in some 6.5.4.x patch
releases.
➤
Bug Number: UDevC00175398. In some instances, while working in the editing
application, a Windows OS window would appear in front of the editing application and take
focus away from the editing application.
7
➤
Bug Number: UDevC00183059. Fixed an issue that would cause audio to pop in and out if
playback is started too close to the edge of incoming media.
➤
Bug Number: UDevC00182792. When working with Armenian Unicode, Story Text in the
NRCS Tool appeared as question marks (?).
➤
Bug Number: UDevC00184060. When you opened the Marker window, the cursor did not
automatically appear in the text field.
➤
Bug Number: UDevC00183122. In some instances, when the User Interface was set to a
darker setting, the text in the Marker window was not visible if it was not selected.
➤
Bug Number: UDevC00183734. Pan might have changed on destination tracks after
performing a dual mono mixdown.
➤
Bug Number: UDevC00184266. (NewsCutter) Simplified Chinese characters displayed as
a “?” in the NRCS Tool slug/story name.
➤
Bug Number: UDevC00184593. You might have received “Assertion Failed” errors when
importing certain AAF files into a bin.
➤
Bug Number: UDevC00180516. (Mac) Macintosh Interplay editing systems were not
creating new media folders after reaching a limit of 5000 files.
➤
Bug Number: UDevC00184307. Performing a QuickTime Reference export was taking an
unusually long time.
Changed in v6.5.4.2 and v10.5.4.2
The following changes are included with this release:
Interplay Sphere Plug-in Update
With this release of the editing application, a Sphere plug-in is no longer automatically
installed when you install the editor. In order to work with Interplay Sphere, you must go to
the avid.com/download site, navigate to the Media Composer | Cloud page and download the
Media_Composer_Cloud_Playback_Setup_1.1.2_Win.exe
Media_Composer_Cloud_Playback_Installer_1.1.2_Mac.zip
After you install the editing application, run this executable to install the Sphere playback
plug-in.
8
Fixed in v6.5.4.2 and v10.5.4.2
OS Update
Mac OS 10.9.2 is supported in this release.
Nvidia Update
This release includes the 331.65 Nvidia Driver. Do not use this driver if you have a Quadro
FX 3700, Quadro FX 3800, or Quadro FX 4800 card.
Color Bars Update
SMPTE RP 219:2002 High-Definition Color Bar Signal bars have been added to the Test
Patterns folders.
•
(Windows) drive:\Program Files\Avid\Avid editing application
\SupportingFiles\Test_Patterns
•
(Macintosh) Macintosh HD/Applications/Avid editing application/
SupportingFiles/Test_Patterns
Fixed in v6.5.4.2 and v10.5.4.2
The following have been fixed in this release:
➤
Bug Number: UDevC00182911. (Interplay) In some instances rendered audio dissolves
were referencing the wrong media.
➤
Bug Number: UDevC00182940. In some instances when “Use Enable Tracks” was
selected, sequences with MP2 audio track exported successfully.
➤
Bug Number: UDevC00183430. When launching the editing application on a new Mac
Pro (late 2013) you might have received a “failed to initialize audio hardware” error.
➤
Bug Number: UDevC00180403. (NewsCutter) The clip color for Freeze Frames might
have been wrong if Dynamic Relink was enabled.
➤
Bug Number: UDevC00183848. When performing a send to playback on a sequence
directly from a bin with multiple audio mixes enabled in transfer settings, you might have
received an Access violation error.
➤
Bug Number: UDevC00178823. QuickTime reference export of a stereoscopic sequence
created two right eye files instead of a left and a right.
9
10
➤
Bug Number: UDevC00181948. (Macintosh) You might have received “UME-1012
Exception” errors when launching the editor as a different user than the user who initially
launched the application.
➤
Bug Number: UDevC00181001. (EDL Manager) CDL information in an EDL (ASC_SOP
and ACS_SAT) might have wrapped to a second line. The CDL information is now on one
line.
➤
Bug Number: UDevC00181765. P2 Legacy imported clips appeared offline if Dynamic
Relink was enabled.
➤
Bug Number: UDevC00183298. Certain audio clips did not retain pan values when cut into
a sequence.
➤
Bug Number: UDevC00182149. In some instances, you would receive a
“kAudioUnderrun” error when playing a sequence containing AMA linked P2 media.
➤
Bug Number: UDevC00182880. When performing a check-in to ProTools, the mixdown
would not create a stereo clip.
➤
Bug Number: UDevC00180337. When importing spanned XDCAM clips, the second to
last frame in was repeated and the last frame was cut.
➤
Bug Number: UDevC00181187. Performing a Dynamic Relink from a proxy resolution to
a high resolution did not relink correctly.
➤
Bug Number: UDevC00180663. Color Correction mode did not refresh if you switched
back from another workspace.
➤
Bug Number: UDevC00175919, UDevC00178267. (Marquee) In some languages, text in
the Tabs and tool tips was unreadable.
➤
Bug Number: UDevC00178268. Chinese text can now be imported and cut/paste into Title
Tool (using Hei or Kai fonts).
➤
Bug Number: UDevC0177337. (NewsCutter) The default keyboard shortcut for Trim Mode
did not work with a Spanish keyboard.
➤
Bug Number: UDevC00182511. The default Segment Mode Lift/Overwrite button on a
Dutch keyboard did not work properly.
➤
Bug Number: UDevC00182518. In some instances, selecting AltGR with foreign special
characters did not work properly.
Fixed in v6.5.4.2 and v10.5.4.2
➤
Bug Number: UDevC00175274. If video was not selected in the background, Marquee
Title Tool “color picker” menu could be black and unreadable.
➤
Bug Number: UDevC00179406. You could not rename a 4GB or greater file on an ISIS
workspace if the Avid editing application was open.
➤
Bug Number: UDevC00183183. You might have received an “ADMConsumer::PreLoad”
error when trying to start play near several dissolves on audio tracks with 5.1 media.
➤
Bug Number: UDevC00182577. In some instances, selecting Special > Read Audio
Timecode did not read timecode accurately.
➤
Bug Number: UDevC00181088. Consolidating DNxHD 444 resulted in a “foreign
compression type” error.
➤
Bug Number: UDevC00183421. Rendered audio dissolve played at different level than real
time.
➤
Bug Number: UDevC0182509. The creation time was incorrect for AS02 volume exports.
➤
Bug Number: UDevC00182340. Slate text was truncated on long clip names in the Script
Window.
➤
Bug Number: UDevC00180834. When performing a Digital Cut, Audio Project Output
settings would change from Direct to Stereo when connected to Mojo DX.
➤
Bug Number: UDevC00182828. Exporting to a P2 device resulted in a “connect a P2
device” error even when the device was properly connected.
➤
Bug Number: UDevC00183369. Black lines appeared on the sides of Color Bars.
➤
Bug Number: UDevC00183358. Audio Punch-in did not work properly on some supported
laptops.
➤
Bug Number: UDevC00182324. AMA Linking to H.264 MP4 clips resulted in the video
freezing on the first frame.
➤
Bug Number: UDevC00182781. In some sequences, if tracks were sync locked and you
performed a Transcode with media of different frame rates, black holes were created.
➤
Bug Number: UDevC00182762. A Subcap .stl file took a long time to import.
11
➤
Bug Number: UDevC00177165. In some instances, a saved title appeared shifted in the
Timeline.
➤
Bug Number: UDevC00182176. If you saved an effect to the bin, assigned a color to it, you
could not apply the effect to multiple clips in your sequence.
➤
Bug Number: UDevC00183269. After minimizing a Tool (for example, the Console
window of the NRCS Tool) and switching between workspaces, the Tool window would not
respond if you tried to access it again.
➤
Bug Number: UDevC00183367. You might have received “ADM_Coreaudio_underrun”
errors when performing an Audio Punch-In.
➤
Bug Number: UDevC00182704. Exporting XDCAM QT Reference file times has been
improved considerably.
➤
Bug Number: UDevC00170179. When performing a dynamic relink to XDCAM 50-bit
media after using the master clip in a sequence that was subsequently consolidated, the first
frame of the consolidated portion of the original master clip may have been pixelated.
➤
Bug Number: UDevC00182403. Igekami AMA material did not import with the correct
timecode.
Changed in v6.5.4.1 and v10.5.4.1
The following changes have been made to Media Composer v6.5.4.1 and NewsCutter
v10.5.4.1.
Mac OS X Mavericks v10.9 support
This release of the editing application supports Mac OS X Mavericks v10.9 and v10.9.1.
n
UDevC00182920 When working on a Mac v10.9 system, AMA file types do not
automatically update when you select a plug-in.
Exporting a Simplified AAF
A new “Link To Effects Mixdown” export setting allows you to mix down both audio and
video effects so that the exported AAF references only master clips. This might be useful for
workflows with third party applications, such as Telestream® that want to link to the
exported AAF media for further encoding. When the video is mixed down, if a segment of
the video is an existing master clip or filler, a reference to that segment is added to the new
12
Changed in v6.5.4.1 and v10.5.4.1
sequence. If the segment is a transition or effect, a video mixdown occurs which creates a
new master clip. The new mixed-down master clip is added to the project bin and a reference
is added to the new sequence. For the audio mixdown, the editing application can limit the
number of tracks included in the exported sequence to the first 2, 4, 8, or 16 tracks. If an
audio track contains at least one effect or gain change, the entire track is mixed down to a
new master clip. The new mixed-down master clip is added to the project bin and a reference
is added to the new sequence.
To perform a simplified AAF Export:
1. In the Project Window, click the Settings tab and select the Export Link to Effects
Mixdown setting.
If the setting does not appear, click the User Profile Selection menu and select Update
User Profiles. The new setting appears in the settings list.
2. Select the sequence you want to export as a simplified AAF.
3. Select File > Export.
4. Click Options.
The Export Settings dialog opens.
5. Select AAF from the Export As menu.
13
6. Leave the following options enabled: In the Video/Data Details pane, the Mixdown
Video/Effects to V1 is enabled. In the Audio Details pane, Flatten Audio Tracks that
Contain Effects is enabled.
7. Select the number of audio tracks to include in the sequence.
8. Select the Media Destination Drive where you want to save any newly created media.
(This should be a drive that your third party encoding application has access to.)
9. Click Save.
10. Select a location for the AAF file, name the file and click Save.
The AAF file is saved to the selected location.
Fixed in v6.5.4.1 and v10.5.4.1
The following were fixed in Avid Media Composer v6.5.4.1, Avid Symphony v6.5.4.1, and
NewsCutter v10.5.4.1.
14
Fixed in v6.5.4.1 and v10.5.4.1
➤
Bug Number: UDevC00173262. Consolidating and transcoding AMA linked 1080
XDCAM HD 50 MB media was extremely slow.
➤
Bug Number: UDevC00182788. The DisabledRes.txt file did not filter out the desired
resolutions. This has been fixed. Reminder: When adding resolutions to the DisabledRes.txt
file, do not Include OMF or MXF in the resolution name.
➤
Bug Number: UDevC00182788. If you AMA linked to ProRes 444 material, you might
have seen image corruption.
➤
Bug Number: UDevC00182399. Sequences with real-time Subcap effects stuttered during
playback.
➤
Bug Number: UDevC00182484. (Mac) Audio Punch-In was always monitored even if the
audio punch in was set to OFF.
➤
Bug Number: UDevC00182990. In some instances, right-clicking on video in the
Composer window and selecting Export and then sending as an AAF resulted in an Access
Violation error.
➤
Bug Number: UDevC00180741. With Fast Scrub enabled, you could not hear audio during
horizontal movement of the keyframes.
➤
Bug Number: UDevC00178910. Color Decision List (CDL) data was not extracted
properly from sequences.
➤
Bug Number: UDevC00181388. Importing an MXF file that was created by Rhozet and
OpenCube might have resulted in an “MXFDomain_INT_FAILED” error.
➤
Bug Number: UDevC00181352. Performing a Send to Workgroup between two editing
systems was much slower on the 9.5.3.x editing systems than on previous releases.
➤
Bug Number: UDevC00182605. In some instances, performing a Ctrl + X on a sequence
resulted in “Calling a method on freed object” error.
➤
Bug Number: UDevC00181315. You would receive an error message if you searched for
the apostrophe (‘) in the Find window.
➤
Bug Number: UDevC00182411. In the version 6.5.4 editing application, you could not link
to a Pan&Zoom image created on a v5.5.3.7 editing application.
➤
Bug Number: UDevC00182758. After opening the Capture Tool via “Go to capture mode”
some fields were unavailable after moving or resizing the window.
15
16
➤
Bug Number: UDevC00182029. (NewsCutter) Mouse Settings were not saved.
➤
Bug Number: UDevC00172315. The Color Picker window in the Title Tool did not redraw
properly.
➤
Bug Number: UDevC00182528. (Macintosh) You could not drag and drop clips or
sequences from the Interplay Window to a bin.
➤
Bug Number: UDevC00171433. If CAP LOCK was on, you could hear one frame of audio
playback when entering an audio level change from the numeric keypad in the Audio Mixer
tool with an audio only clip loaded in the Source monitor.
➤
Bug Number: UDevC00182233. Markers did not export if the clip or sequence name
contained special characters.
➤
Bug Number: UDevC00182430. (Macintosh) Double-clicking to open a bin at the Finder
level did not open the bin.
➤
Bug Number: UDevC00178480. When playing DNxHD through the hardware codec, you
might have received an Audio Sample Rate error when performing an Audio Punch in
through optical ADAT.
➤
Bug Number: UDevC00175253. Audio would play the same frame twice if you stepped by
frame on group clips in Quad Split mode.
➤
Bug Number: UDevC00182115. DV Scene extraction resulted in Access Violation errors
when recording audio only from AES or ADAT.
➤
Bug Number: UDevC00179177. AMA linking XDCAM MXF did not consolidate.
➤
Bug Number: UDevC00182316. The editing application did not respond to Video Satellite
commands from Pro Tools when playing beyond the last clip in the editing application.
➤
Bug Number: UDevC00180757. The Aspect Ratio was not properly detected for import of
certain media.
➤
Bug Number: UDevC00173841. You might have seen quality issues in the background in
the Title Tool.
➤
Bug Number: UDevC00181798. Subcaps did not display International special characters
when you entered them in the Caption Text box. The characters will be noted as a question
mark (?).
Fixed in v6.5.4.1 and v10.5.4.1
➤
Bug Number: UDevC00181902. Auto-indexing occurred for local storage, even if it was
deselected in the Media Creation Settings.
➤
Bug Number: UDevC00182226. The Restore to Default option was not working for
Transfer Settings.
➤
Bug Number: UDevC00181129. Occasionally, you were unable to save a title.
➤
Bug Number: UDevC00173113. The Timeline window became inactive after opening and
closing a Tool window from the Tools menu.
➤
Bug Number: UDevC00178801. Maximizing the editor did not work in dual monitor
configurations.
➤
Bug Number: UDevC00180609. The Media Tool did not open for projects with names over
31 characters. The project name limit is now 56 characters.
➤
Bug Number: UDevC00181053. If you performed an audio scrub of an Edit While Capture
clip, you would lose audio if you scrubbed into an uncaptured portion of the clip and then
back into the captured portion.
➤
Bug Number: UDevC00181370. Printing Markers printed with an unnecessary gray background.
➤
Bug Number: UDevC00176851. The scroll bar did not work properly to allow you to see
the entire path of the “Interplay Root Folder for This Project” in the Interplay Folder Settings.
➤
Bug Number: UDevC00182469. In some instances, if you deleted a clip you had
transcoded from an AMA linked clip, the AMA QuickTime file was also deleted.
➤
Bug Number: UDevC00169584. EDLs created from S3D clips might have had Start TC out
of sync.
➤
Bug Number: UDevC00182110. You might have received “Core_Consistency” errors
when transcoding media from Final Cut Pro to AVC-150.
➤
Bug Number: UDevC00181971. In some instances, AVC-Intra 50 and AVC-Intra 100 did
not export to P2 devices.
➤
Bug Number: UDevC00182191. You might have received Decomp stream errors when
exporting OP1a XDCAM 50 MXF files.
17
➤
Bug Number: UDevC00182134. Importing mp4 files crashed the editing application.
➤
Bug Number: UDevC00182126. When switching between HD and SD, video input settings
did not always stick.
➤
Bug Number: UDevC00180416. Clips created in a Film project 23.97 and opened in a non
film project resulted in an error if Dynamic Relink was enabled.
➤
Bug Number: UDevC00182107. Immediately after performing a capture, a
“Monpaintwindow” error appeared if you switched from a Capture workspace to an Edit
workspace.
➤
Bug Number: UDevC00179128. PhraseFind did not index UNC mounted ISIS volumes on
an Interplay client.
➤
Bug Number: UDevC00175168. You would receive an Assertion failed error when
exporting from a 25 project to XDCAM.
➤
Bug Number: UDevC00181470. The Specify Bin Name setting in the AMA settings did
not stick after a restart.
➤
Bug Number: UDevC00177652. You might have seen Sync offsets when modifying the
frame rate of a sequence.
➤
Bug Number: UDevC00181762. You might have received “Failed to Get the sample
temporal offset” errors when AMA linking to QuickTime XDCAM HD.
Known Issue
➤
18
Bug Number: UDevC00178823. When a QuickTime reference sequence is created for a
stereoscopic sequence, the files created for the left eye and right eye are actually reversed.
Both files are created, they are just named incorrectly.
Legal Notices
Legal Notices
Product specifications are subject to change without notice and do not represent a commitment on the part of Avid
Technology, Inc.
The software described in this document is furnished under a license agreement. You can obtain a copy of that license by
visiting Avid's Web site at www.avid.com. The terms of that license are also available in the product in the same directory as
the software. The software may not be reverse assembled and may be used or copied only in accordance with the terms of the
license agreement. It is against the law to copy the software on any medium except as specifically allowed in the license
agreement.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, for any purpose without the express written permission of Avid Technology, Inc.
Copyright © 2014 Avid Technology, Inc. and its licensors. All rights reserved.
Attn. Government User(s). Restricted Rights Legend
U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or
“commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf
of a unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms
of the License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.
This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents.
Trademarks
Avid and the Avid logo are trademarks or registered trademarks of Avid Technology, Inc. in the United States and/or other
countries. See www.avid.com/US/about-avid/legal-notices/trademarks for more information on Avid's trademarks.
Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries. Apple and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries. All other trademarks contained herein are the property of their respective owners.
ReadMe v6.5.4.6 • May 2015
19
20