Instructional Sheet Multi Color 9 Piece Accent Light Kit

Instructional Sheet
Part Number:
ALK9-RGB93
Important: Read all instructions prior to installation.
Multi Color 9 Piece Accent Light Kit
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
Antenna
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
V+
G
R
B
3. Mount controller and connection box in with wire ties dry locations away
from heat sources and moving parts and route power wires to power source
then connect. Route white antenna wire away from metal objects for maximum
operating range.
V+
G
R
B
2. Mark the desired location of the strips. Mount strips using double sided tape
or silicone in desired location and away from heat sources and moving parts.
V+
G
R
B
RGB LED Flexible Light Strip
V+
G
R
B
1. Connect strips to the connection box then connect to the controller.
Temporarily apply power to the controller and test strip locations for proper
lighting effect.
V+
G
R
B
V+
G
R
B
Installation
V+
G
R
B
2 - RF Wireless Key chain Remotes
1 - Connection Box
15 - Wire Ties
V+
G
R
B
3 - 15 LED Weatherproof Accent Light Strips
2 - 12 LED Weatherproof Accent Light Strips
4 - 6 LED Weatherproof Accent Light Strips
1 - RF RGB Accent Light Controller
V+
G
R
B
Diagram
Parts Included
Specifications
Operating Voltage: 10-15VDC
Current Draw: 1.5 Amp Max
Beam Angle: 120°
Operating Temp: -10 – 50 C
IP Rating: IP68 (strips only)
Remote Frequency: 315MHz
Remote Range: 100ft Max
Remote Battery: 27A x 1
Strip Lengths: 4.775”L, 8.7”L, 11.025”L
Strip Wire Length: 5’
Controller Size: 3.4”L x 1.185”W x .6”D
Power Out
To LEDs
Connection Box
12VDC
Power In
Fuse 2A
•
•
•
•
•
•
•
•
•
•
•
Cautions
1/4” Snap Spades
Connect strips prior to applying power to the controller.
Be sure to mount controller and connection box in dry locations.
Any water damage or corrosion to the controller or connection box will void
the warranty.
WARNING: Negative (-) battery cable must be unhooked first to avoid
fire hazard
RF Controller Box
Battery
Power Supply
(CPS-12VDC-50W)
OR
CPS connector
(CPS-F2ST)
Controller Modes
1
2
3
4
5
6
7
8
9
Red
Blue
Magenta
Green
Yellow
Cyan
Amber
Fuchsia
Lime
10
11
12
13
14
15
16
17
RGB Cool White
Aqua
Pink
Light Purple
RGB Natural White
RGB Warm White
Multiple Color Strobing Mode
Multiple Color Fading Mode
Warranty
•
2 year
4400 Earth City Expy, St. Louis MO 63045
Remote Battery Replacement
1. Remove three philips head screws and remove the button panel.
2. Carefully remove battery and replace with new.
3. Reposition button panel then insert and tighten screws
Remote Functions
Button
Single Press
Cycles through one of 15 solid
color modes along with one
multiple color fade one multiple
color strobe modes.
Activates one of three single
color strobing modes.
Activates single color fading
mode.
Toggles power On/Off
866-590-3533
Long Press
Selects brightness level in five
steps during single color non
dynamic modes.
N/A
N/A
N/A
[email protected]