Technologies Inc. - LTMC-SHOP

Transcription

2013
Technologies Inc.
Catalog
photo by On Tra
ck Media
Sportbike products that make sense!
Welcome
At Woodcraft, innovation is one of the primary driving forces for our company. We use both the experience of our staff and
the feedback from our customers to produce products that not only aim directly at the needs of track riders but also do it in
a way that provides new benefits. If we can’t make something that is more crash-worthy, easier to repair or with some other
real world benefit then we simply won’t get into that product line.
Below are a few of the new things that we are introducing for 2013, along with some of the advantages that we are aiming to
provide with these product lines. Thanks again for taking the time to check out our catalog. Eric Wood
President
A
Sampling of 2013 Innovations
The 5 second Axle Slider
For some time now, we have had people (including our company
president) who wanted to run axle sliders on their track bikes, but
could not put up with the extra time that axle sliders added to a wheel
change. After much R&D, Woodcraft is proud to unveil our patent
pending quick release sliders that provide the protection of a solid
slider puck (a company trademark) while adding only 5 seconds to a
wheel change. We are really excited about this new line, be sure to
check them out on page 31.
Woodcraft Solid Bar End Sliders
Now available for all Woodcraft handlebars, these heavy duty sliders
feature the tradmark Woodcraft solid slider for maximum protection.
Designed just like our top selling frame slider line, the slider pucks
are quickly replaced with the removal of a single bolt that is easy to
access after a fall (as opposed digging out a typical center mount
bolt). They are availble in three styles; lightweight for competition,
heavyweight for vibration damping, and with a special mount for our
patent pending hand / lever guards. See more on page 4.
High Grip, Energy Absorbing Footpegs
These new pegs were tested all throughout 2012 and got rave
reviews for the extra grip that they provided on the racetrack. They
have been described as “striking the perfect balance between foot
grip and boot sole life”. In addition, Woodcraft added a break-away
section at the end, designed to absorb much of the energy of a
big fall, but still leaving a rider with enough peg to continue riding
when possible. These pegs are now standard on about 75% of the
Woodcraft rearset kits.
1
Woodcraft Technologies Inc
Table of Contents
Hand Controls
3
Hand Guards
7
Foot Controls
8
3-piece Split Clip-Ons & OEM Fork Sizing Chart
Clip-On Risers
Bar End Sliders
Rearset Kits
3-piece Pedals
Brake Switches & Return Springs
Case Covers 16
Frame Sliders
19
Shark Guards
21
Tire Warmers
22
Wheel Stands
23
Armour Bodies
27
Solo Operation Front Stand
Front Stand Pin Application Chart
Rear Stands (spool & pad)
Swingarm Spools
Bodywork - Pro Series
Custom Seat Foam & Dzus Fasteners
Axle Sliders 31
Klucky Pucks
32
Ceramic Bearings
33
Apparel & Accessories
34
Terms & Conditions
35
Sportbike products that make sense!
www.woodcraft-cfm.com
2
Hand Controls
3-piece Split Clip-On
The motivation behind the Woodcraft 3-piece Split Clip-ons is simple: installing, servicing, and
removing clip-ons can be a real pain and eat up valuable time at the track! Our original 3-piece design eliminates the
need to disassemble the front-end to service your Clip-ons.
Light weight, great looks, improved strength, adjustability and easy installation make Woodcraft 3-piece Split Clip-ons
an essential addition to any sportbike.
All Woodcraft Clip-ons are proudly made in the USA.
Street & Track friendly 7-degree down angle
Ease of Installation
Woodcraft’s trademark 2-piece body clamp installs easier and faster
than the competition. You will never have to disassemble your front
end again just to change bars.
Economical
The universal replacement bars can pay for themselves in one crash!
Most OEM bars are expensive 1-piece assemblies and require complete front end disassembly to replace.
Two-piece clamp
Lightweight
Replaceable bar
(all sets sold complete with
handlebars)
Replacemet bars
(available in black)
Extra time was taken on these pieces to make them lightweight,
strong and great looking.
Clip-On Application (mm) & Part Number
29mm
12-0129
38mm
12-0138
52mm
12-0152
30mm
12-0130
41mm
12-0141
53mm
12-0153
31mm
12-0131
54mm
12-0154
32mm
12-0132
41mm Kawi650R 12-0141S
43mm
12-0143
55mm
12-0155
33mm
12-0133
45mm
12-0145
57mm
12-0157
34mm
12-0134
46mm
12-0146
35mm
12-0135
48mm
12-0148
36mm
12-0136
50mm
12-0150
37mm
12-0137
51mm
12-0151
!
Notes-
> Special Clip-On sizes
are available: We can
modify our standard
clip-ons for applications
between 29mm to 55mm.
> For special applications please
call us: 978-297-2977
Clip-On Accessories
Accessory & Part Number
7/8” Standard Bar (Silver) (ea.)
13-0100
7/8” Standard Bar (Black) (ea.)
13-4100
1” Bar (Silver) (ea.)
13-0101
1” Bar (Black) (ea.)
13-4101
Extra Long 7/8” Bar (Black)
Adds 1.5 inches (ea.)
13-4105
Bar Mount Res. Bracket
12-3200
GSX-R Brake Res. Brackets
600/750 to 2005
1000 to 2004
12-3240
600/750 2006+
1000 2005+
12-3245
3
Replacement Handlebar
All Woodcraft Clip-Ons feature a easily removable and replaceable
handlebar tube for quick and cost-effective fixes in case of a crash.
12-3200
Bar Mount Brake Reservoir Bracket
Built for bikes that present challenges in mounting the brake
reservoir, this trick bracket will do the job. This bracket allows the
reservoir to be oriented either parallel or perpendicular to the bar.
Note- All Riser Clip-Ons (p.4) require this style of mount.
GSX-R Brake Reservoir Bracket
12-3245
For Suzuki GSX-R models that use a remote brake fluid reservoir
these simple brackets bolt through the top triple clamp pinch bolt
and provide a solid mounting point for OEM reservoir.
Note- These are not compatible with Woodcraft Riser Clip-Ons.
“My Woodcraft clip-ons feel excellent and have withstood multiple crashes..
Hand Controls
Clip-On Risers
Replaceable bar
(all risers are sold
complete with handlebars)
1” rise
Adjustability
*custom risers are available in certain sizes
by special order with a $40 machining
charge (2 week lead time).
1” rise
Woodcraft’s clip-on risers consist of special indexed
risers that are easily changed and come in 1”, 1.5”, 2”, 2.5”,
and 3” rises over a standard Woodcraft Clip-On.
Necessity
Several models have very tight clearances from the factory.
Our Woodcraft risers are crafted for a perfect fit in these
applications.
Comfort
Many riders find stock sportbike ergonomics uncomfortable
for real-world riding. The Woodcraft risers allow you to
custom tailor the fit and feel of your motorcycle, resulting in
a more enjoyable ride.
2” rise
1.5” rise
Note: See our website for clip-on riser measurment instructions.
www.woodcraft-cfm.com.
3” rise
2.5” rise
!
Riser Spacer Kit
Part #
10mm spacer
for 1” risers
12-Spacer1.0
10mm spacers
for 1.5-3” risers
12-Spacer1.5
An Important Note About Clipn Rise-
> The rise on these parts is referenced from the standard Woodcraft clip-on (not OEM bars).
> When evaluating your motorcycle for fitment it is important to note that the center of
the handlebar on these risers sits about one (1) inch forward of the edge of the fork
tubes. A complete fitting guide for risers is available at www.woodcraft-cfm.com.
Riser Application (mm) & Part Number
Rise
37mm
1.0”
12-1537
41mm
43mm
45mm
48mm
50mm
12-1541 12-1543
12-1545
12-1548
12-1550
51mm
52mm
53mm
12-1551 12-1552 12-1553
1.5”
12-2537
12-2541 12-2543
12-2545
12-2548
12-2550
12-2551 12-2552 12-2553
2.0”
12-3537
12-3541 12-3543
12-3545
12-3548
12-3550
12-3551 12-3552 12-3553
2.5”
12-4537
12-4541 12-4543
12-4545
12-4548
12-4550
12-4551 12-4552 12-4553
3.0”
12-5537
12-5541 12-5543
12-5545
12-5548
12-5550
12-5551 12-5552 12-5553
Bar End Sliders
HD Slider quick change
New for 2013, these sliders offer riders the option of a
Heavy Duty plastic slider, a vibration reducing weighted
slider and an option to have a heavy duty slider with an
integrated mount for a Woodcraft Lever Guard
>Some models may have
interference between the fork
pinch bolt and the riser. Our
10mm riser spacer moves the
riser forward allowing clearance
on many models. Spacer kits
come complete with all needed
hardware.
With Stainless Steel
weight for vibration
reduction
16-0299
Bar End Slider Part Number
HD Plastic Bar End Slider (lightweight)
16-0299
HD Plastic Weighted Bar End Slider (heavyweight)
16-5299
HD Plastic Bar End Slider with Guard Mount
16-9299
16-0599
..Woodcraft is now my first stop anytime I need parts”
-DK
16-9299
Integrated mounting
surface for Woodcraft
Lever Guards (pg 7)
4
Hand Controls
Specialty Applications
Model
Part #
Kawasaki EX250 (to 07)
12-0236
Kawasaki EX500 (87-83)
12-0236
Kawasaki EX500 (94+)
12-0237
Kawasaki EX250 08+
12-4537
Kawasaki EX300 2013
12-4537
Honda CBR250R
12-1537
Honda CBR600RR 07+
12-2548
Honda CBR1000RR 08+
12-1550
Ducati Monster 696-1100
12-1660
Ducati Panigale R/ Std
12-0153/57**
Suzuki GSXR600/750
(06-10)
12-0350^
Suzuki GSXR1000(03-04) 12-0250*^
Legend
GSXR1000 (03-04)
12-0250*^
* Race Only
^ Requires Reservoir Bracket
**Requires Damper Mount 12-0645
2008+ Kawasaki Ninja 250/300
The new Ninja 250 is a great bike for both the street and track, new or
experienced riders. We sat down and designed a set of risers just for this cool
machine. The result is a set of 37mm Risers with a rider-friendly 5-degree angle that
offer a vastly better racing position while not interfering with the gauges, tank and
fairing. (12-4537)
Ducati Monster 696 / 796 / 1100
The front end design of this motorcycle makes difficult to install conventional clip-ons
or risers without interference issues with the fuel tank. Our unique adaptor plate
design bolts on top of the stock handlebar mount, keeping all of the stock clearances
while giving you the advantage of having replaceable bar tubes, plus the ability to
add extra rise to the bars at any time. (12-1660)
Note: This kit requires extra long replacement bars, which are included with the kit.
Ducati Panigale
Ducati Panigale
stabilizer mount
Ducati’s first all new, from the ground up superbike in 2 decades provided some
challenges when designing clip-ons. The OEM clip-ons have the steering stabilizer mount directly to them making conventional race clip-ons a problem. Our
new Panigale kit comes with a stabilers mount allowing you to run race clip-ons
while keeping your stock stabilizer.
Honda CBR600RR 07+/CBR1000RR 08+
Honda designed this motorcycle with extremely tight clearance between the
handlebars & bodywork, leaving no room for conventional race clip-ons for riders
with the stock upper fairing stay. We have developed special risers for these models
(12-2548 for the CBR600RR) (12-1550 for the CBR1000RR) allowing the benefits of
a race clip-on while keeping the stock clearances.
Honda CBR250R 2011+
When we looked at this bike, one thing that we all agreed on is that the bars needed
to be lower. Our CBR250R clip-ons bolt on top of the top clamp and drop the
handlebars a full 1.5” from stock, making for a much sportier feel. (12-1537)
Suzuki GSXR 600/750 2006-10, GSXR 1000 2003-04
Woodcraft’s are the only clip-ons that fit the 03-04 Suzuki GSX-R 1000 (track
only) and 06-10 Suzuki GSX-R 600/750’s (street & track) properly. Due to the
fork taper regular clip-ons cannot grasp the fork leg correctly. With its internal
step, Woodcraft’s exclusive 2-piece clamp ensures a secure grip! (12-0350 for
the 600/750, 12-0250 for the 1000)
Kawasaki Ninja 250 / 300
5
Hand Controls
Clip-on Application Chart
Fitment: The chart below lists the sizes of the upper portion of the fork tubes for each model. There are some models that require
modifications in order for the clip-ons to be fitted properly and to have the required amount of clearance with the fairings, gauges and other
parts of the motorcycle. We have noted some models with known interference issues. If you have any questions about your model, please
give us a call and we would be happy to assist you.
Aprilia
Kawasaki continued...
RS250
50
Ninja 650 (06+)
41S
Superduke
48
Mille
53
ZX6E (93+)
41
RC8
51*^
Mille R / RSVR
51
ZX6R (95-97)
41
Ohlins
RSV4
51^^
ZX6R (98-02)
46
SB Forks (Pre-95)
51
Falco / Tuono
53
ZX6R (03-08)
50
SB Forks (96-03)
53.5
RSVR (Showa)
53
ZX6R (09+)
51
SB Forks 04+
52
ZX7R (91-03)
52
Triumph
M2 Cyclone
43
ZX9R (94-97)
52
Speed Triple (Pre-04)
45
S1, S2 (95-98)
54*
ZX9R (98-03)
46
Speed Triple (05-06)
50 or 52**
Firebolt
54
ZX10R (04+)
50
**Must Measure Forks
1125
54
ZRX1100/1200
43
Speed Triple (07+)
52
Daytona 675
50
Buell
Suzuki
BMW
S1000RR
55*
GS500
37
Street Triple
50
GSXR600 (94-96)
50
Thruxton (08-11)
41
50
GSXR600 (97-03)
45
White Bros
GSXR600 (04-05)
50
SB Forks
Ducati
620-1000SS
Monster (93-09)
50
Monster 696/796/1100
MAP
748/749/916/996/998/999
53
GSXR600 (06-10)
48/50
Yamaha
848/1098/1198/ Panigale S
53
GSXR600 (11+)
50
TZ250
52
Panigale Std
57
GSXR750 (93-05)
50
FZR400,600
38
GSXR750 (06-10)
48/50
R6 (99-04)
43
Honda
54
CBR600 F1/F2
41
GSXR750 (11+)
50
R6 (05)
50
CBR600 F4/F4I
43*
GSXR1000 (01-04)
49/50*
R6 (06+)
50^^
CBR600RR (03-04)
45
GSXR1000 (05-06)
50
YZF750
50
CBR600RR (05-06)
48
GSXR1000 (07-08)
50^^
R1 (98-02)
50
CBR600RR (07+)
48^
GSXR1000 (09+)
50
R1 (04+)
50*^^
CBR1000RR (04-07)
50
GSXR1100
50
CBR1000RR (08+)
50^
SV650
41^^
* Interference issue with stock
bodywork
SV650S
41
^
EX250 (88-07)
EX36
SV1000 (03+)
46
^^ Cannot use risers
EX250/300 (08+)
37^
TL1000R/S
50
EX500 (87-93)
EX36
Hayabusa
50
EX500 (94+)
EX37
MAP=Monster Adapter Plate
Woodcraft does not guarantee
clip-on fitment. This chart is a reference
tool for fork tube sizes.
Clayton Potter
Kawasaki
Chris Ormonde CCS #617
KTM
Require risers
6
Hand Guards
Clamps to any 7/8” handlebar
A ppr o v e d
Now required by AMA Pro Racing, Canadian
Superbike, British Superbike, FIM and MotoGp
Our new line of hand guards are designed to prevent a common
and often violent crash on the race track when two riders make
contact. Our exclusive design is easily mounted, durable and
adjustable.
Patent
Pending
1” of adjustment
to fit all levers
Safety
New for 2013!
Colored Guards
Just about everyone we talked to knows someone who has crashed due to their brake lever coming into
contact with another rider. Our new hand guard line not only prevents inadvertant lever contact but also
helps to protect your hands during a crash by keeping them out of harms way. We have a few friends
whose pinky fingers have been “shortened” in a crash....
Adjustability
Our patent-pending design mounts to any 7/8” handlebar and is adjustable for any sized levers. The
unique 30 degree down angle helps to keep the guards from interfering with the riders hands while on the
track.
Durability
Each mount is machined from tough 6061-T6 aluminum with a durable anodized finish. The guards are
made from a special plastic that is tough enough to withstand an impact but pliable enough not to splinter
in a crash. Replacement plastic guards are available individually.
“After watching the Daytona 200 in 2011, I
never want to race without a set of these on
my bike ever again” - T.S.
Lever Guard
Part Number
Lever Guard Kit (LH+RH) BLK
15-0100
Lever Guard Kit (LH+RH) Blue
15-0200
Lever Guard Kit (LH+RH) Green
15-0300
Lever Guard Kit (LH+RH) Red
15-0400
Lever Guard Kt (LH+RH) Yellow
15-0500
Lever Guard Kit (LH+RH) Silver
15-0600
Right Hand Guard Kit
15-010(X)RSA*
Left Hand Guard Kit
15-010(X)LSA*
Replacement Plastic Guard LH
15-050(X)L*
Replacement Plastic Guard RH
15-050(X)R*
Extra Long Black Bar Tubes
13-4105
*To order replacement parts, please the number for your color of choice
in place of the (X). Example: 15-0103RSA = RH Guard Kit in Green
What do I need a left
side hand guard for??
7
Foot Controls
Rearset Kits
by CFMotorsports
These foot controls are made in the USA and are one of the most vital connections you have with your motorcycle. As a result Woodcraft designs and builds the best rearsets available to give you the
clearance, feel and durability that today’s riders demand.
Our rearset kits can use OEM pedals (whenever possible) to give you less expensive puchase options and to make
spares easy to find. Our Full Kits include Woodcraft’s 3-piece pedals, giving you a even stronger assembly and continuing our tradition of easy part replacement.
New For 2013 : High Grip Break-Away Footpegs
Now available on most rearsets. These pegs are designed
to break off in a crash, saving the rearset bracket while still
leaving enough peg to finish the race or ride back to the pits.
Toughness
CFMotorsports rearset kits are CNC machined from 6061-T6
billet aluminum and offer more than twice the durability of OEM
rearset brackets. 6061-T6 is not only strong, but can bend without
cracking, making our kits repairable.
Billet 6061-T6
Confidence
Our knurled footpegs give supreme feedback and some of
the best traction available today. Footpegs feature a raised
lip at the end for optimum grip, especially in the rain.
Parts Accessibility
Many kits will accept the OEM levers and footpegs for
no-hassle spares. Woodcraft will sell any individual piece
for replacement parts.
Race Proven
Replaceable Pegs
Full Kits include 3-piece Pedals
Each kit is custom tailored for rise and setback.
CFMotorsports rearsets have proven their worth with
hundreds of National and Regional Championships.
Upgradable
Our rearset kits are upgradable to fit any budget. Save
money by choosing from one of our basic kits or upgrade to a full
rearset. Our full rearset kits can be further upgraded with our folding
pedal tips or matching brake side heel guards*.
*Billet heel guards are not available for all models. Check for model availability
in our rearset chart.
Legend
GP = GP shift only
SLV = Silver
STD = Standard shift only
[1] = KIt comes w/shift pedal
No GP or STD Listed = Works either way
[2] = Kit comes w/brake pedal
BLK = Black
?
What is GP-shift?
GP-shift is the common term for reversing the shift pattern of your motorcycle. A bike equipped with GP-shift engages first
gear by pulling UP on the shift lever and is primarily done for racetrack applications.
“I’ve been through 3 crashes - 1 of which totaled the bike
but the rearsets held up perfectly!”- Jimmy Wood
8
Aprilia
Foot Controls
Rearset Kit
Rearset Kit w/pedals
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
Pedals Fit
OEM Braket?
RS125 GP • SLV
----------
05-0731B
06-0801
OEM
----------
Adjustable
Brake Only
RS250 • SLV
05-0700
05-0700B
06-0700
07-1225
----------
1”, 1”
No
Mille 1998-03 / Tuono 2002-05 • SLV
05-0710
----------
06-0300
OEM
----------
.5”, .5”
No
Mille 1998-03 / Tuono 2002-05 GP • SLV
05-0712 [1]
----------
06-0300
07-2600
----------
.5”, .5”
No
Tuono 2006-11 • SLV
05-0720
----------
06-0300
OEM
----------
.5”, .5”
No
Tuono 2006-11 • SLV
05-0722 [1]
----------
06-0300
07-0675
----------
.5”, .5”
No
Factory/R 2004-11 • SLV
BMW
Buell
Ducati
Honda
by CFMotorsports
Model • Color
05-0720
----------
06-0300
OEM
----------
.5”, .5”
No
05-0722 [1]
----------
06-0300
07-0675
----------
.5”, .5”
No
RSV4 08-10 • SLV
----------
05-0740B
06-0811
07-0625
----------
Adjustable
Brake Only
RSV4 APRC 11+ GP • SLV
----------
05-0741B
06-0811
07-0118
----------
Adjustable
Yes
RSV4 APRC 11+ STD • SLV
----------
05-0742B
06-0811
07-0130
----------
Adjustable
Yes
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
Pedals Fit
OEM Braket?
Factory/R 2004-11 GP • SLV
Model • Color
Rearset Kit
S1000RR STD • BLK
----------
05-0750B
06-4801
OEM
----------
Adjustable
No
S1000RR GP • BLK
----------
05-0751B
06-4801
OEM
----------
Adjustable
No
S1000RR STD/GP Race Only • BLK
----------
05-0752B
06-4801
07-3752
----------
Adjustable
No
Rearset Kit
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
Pedals Fit
OEM Braket?
XB9 / XB12 STD • SLV
----------
05-0800B
06-0800
07-2178
----------
Adjustable
No
XB9 / XB12 GP • SLV
----------
05-0805B
06-0800
07-2178
----------
Adjustable
No
Model • Color
Rearset Kit
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
Pedals Fit
OEM Braket?
Monster 696 /796/ 1100 • BLK
----------
05-0660B
06-4801
07-2550
----------
Adjustable
No
750 / 900SS 1991-98 • SLV
05-0600
05-0600B
06-0300
07-2750
----------
1”, 1”
Yes
750 / 800 / 900 / 1000SS 1999-06 • SLV
05-0620
05-0620B
06-0800
07-2550
----------
Adjustable
Yes
Paul Smart Replica/Sport Classic 06 • SLV
05-0620
05-0620B
06-0800
07-2550
----------
Adjustable
Yes
748 / 916 / 996 / 998 • SLV
05-0610 [1]
05-0610B
06-0610
OEM
----------
Adjustable
Brake only
749 / 999 • BLK
05-0625 [1]
05-0625B
06-4811
07-2750
----------
Adjustable
Brake only
848 / 1098 / 1198 • BLK
05-0640 [1]
05-0640B
06-4811
OEM
----------
Adjustable
Brake only
848 / 1098 / 1198 • SLV
Model • Color
05-0640A [1]
05-0640BA
06-0811
OEM
----------
Adjustable
Brake only
Hypermotard • BLK
----------
05-0650B
06-4811
07-0275
----------
Adjustable
No
Panigale STD • BLK
----------
05-0645B
06-4801
OEM
----------
Adjustable
No
Panigale GP • BLK
----------
05-0646B
06-4801
OEM
----------
Adjustable
No
Diavel STD • BLK
----------
05-0670B
06-4670
OEM
----------
Adjustable
No
Diavel GP • BLK
----------
05-0671B
06-4670
OEM
----------
Adjustable
No
Model • Color
Rearset Kit
CBR600F2 / F3 1991-98 • SLV
05-0300
----------
CBR600 F4 1999-2000 • SLV
05-0330
05-0330B
CBR600 F4i 2001-06 • SLV
CBR600RR 2003-2006 • SLV
CBR600RR 2007+ • BLK
NT647 Hawk (Doesn’t work w/Stock Exhaust) • SLV
9
Rearset Kits
Shift Rod
Optional
Heel Guard
06-0300
07-0925
----------
1”, 1”
No
07-0850
----------
1.25”, 1”
Yes
Repl. Pegs
Rise Up &
Back
Pedals Fit
OEM Bracket?
05-0330
05-0332B
06-0300 (L)
06-0301 (R)
06-0300 (L)
06-0301 (R)
07-0850
----------
1.25”, 1”
Yes
05-0335 [1]
05-0335B
06-0360
07-2875
----------
1”, 1.25”
No
05-0338 [1]
05-0338B
06-4361 (L)
06-4301 (R)
07-2925
----------
Adjustable
No
05-0320
----------
06-0300
07-0675
----------
1.375”, 1”
No
06-0300 (L)
06-0301 (R)
OEM
----------
1”, .5”
No
07-0675
07-0600
-------------------
RC51 • SLV
05-0340
----------
CBR 250 STD • BLK
CBR 250 GP • BLK
05-0375
05-0376
05-0375B
05-0376B
06-4801
06-4801
Adjustable No
Adjustable No
Legend : [1] Designates kit comes with shift pedal.
3-piece Pedals
by CFMotorsports
Shift Pedal
Repl. Shift
Shaft
RS125 2006+ • SLV
08-0731
RS250 • SLV
Mille 1998-03 / Tuono 2002-05 • SLV
Mille 1998-03 / Tuono 2002-05 GP • SLV
Honda
Ducati
Buell
BMW
Aprilia
Model • Color
Standard
Pedal Tip
Folding
Pedal Tip
Brake Pedal
Repl. Brake
Shaft
Standard
Pedal tip
Folding
Pedal Tip
08-1145
08-0899
08-7899A
09-0730
09-1330
08-0099
08-7099A
08-0700
08-2099
08-0099
08-7099A
08-0712
08-1199
08-0099
08-7099A
09-0700
09-1099
08-0099
08-7099A
----------
----------
08-0099
08-7099A
08-0722
08-1199
08-0099
08-7099A
----------
----------
08-0099
08-7099A
Tuono 2006+ • SLV
----------
----------
08-0099
08-7099A
----------
----------
08-0099
08-7099A
Tuono 2006+ GP • SLV
08-0712
08-1199
08-0099
08-7099A
----------
----------
08-0099
08-7099A
Factory/R 2004+ • SLV
----------
----------
08-0099
----------
----------
----------
08-0099
----------
Factory/R 2004+ GP • SLV
08-0712
08-1199
08-0099
08-7099A
----------
----------
08-0099
08-7099A
RSV4 • SLV
08-0740
08-1145
08-0899
08-7899A
09-0740
09-1330
08-0099
08-7099A
RSV4 APRC 11+ GP • SLV
08-0741
08-1145
08-0899
08-7899A
09-0740
09-1330
08-0099
08-7099A
RSV4 APRC 11+ STD • SLV
08-0740
08-1145
08-0899
08-7899A
09-0740
09-1330
08-0099
08-7099A
Standard
Pedal tip
Folding
Pedal Tip
Model • Color
Shift Pedal
Repl. Shift
Shaft
Brake Pedal
Repl. Brake
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
S1000RR GP • BLK
08-0751
08-4145
08-4899
08-7899
09-0750
09-4330
08-4099
08-7099
S1000RR STD • BLK
08-0750
08-4145
08-4899
08-7899
09-0750
09-4330
08-4099
08-7099
S1000RR Race Only • BLK
08-0752
09-4145
08-4899
08-7899
09-0750
09-4330
08-4099
08-7099
Shift Pedal
Repl. Shift
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
Brake Pedal
Repl. Brake
Shaft
Standard
Pedal Tip
Folding
Pedal TIp
XB9 / XB12 STD • SLV
08-0800
08-1800
08-0899
08-7899A
09-0800
09-1099
08-0099
08-7099A
XB9 / XB12 GP • SLV
08-0805
08-1805
08-0899
08-7899A
09-0800
09-1099
08-0099
08-7099A
Repl. Shift
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
Brake Pedal
Model • Color
Model • Color
Shift Pedal
Repl. Brake Standard
Shaft
Pedal Tip
Folding
Pedal Tip
Monster 696 / 1100 • BLK
08-0660
08-4145
08-4899
08-7899
09-0660
08-4660*
08-4899
08-7899
750 / 900SS 1991-98 • SLV
08-0600
08-1199
08-0099
08-7099A
09-0600
09-1099
08-0099
08-7099A
750/800/900/1000 99-07 • SLV
08-0620
08-1620
08-0899
08-7099A
09-0620
09-1620
08-0099
08-7099A
Paul Smart Replica/Sport Classic 06
08-0620
08-1620
08-0899
08-7099A
09-0620
09-1620
08-0099
08-7099A
748/916/996/998 • SLV
08-0610
08-1199
08-0099
08-7099A
09-0610
08-1620
08-0099
08-7099A
749/999 • BLK
08-0625
08-4620
08-4899
08-7899
09-0625
09-4620
08-4099
08-7099
848/1098/1198 • BLK
08-0640
08-4620
08-4899
08-7899
09-0640
09-4620
08-4099
08-7099
848/1098/1198 • SLV
08-0640A
08-1620
08-0899
08-7899A
09-0640A
09-1620
08-0099
08-7099A
Hypermotard • BLK
08-0650
08-4145
08-4899
08-7899
09-0650
08-4247*
08-4899
08-7899
Panigale STD • BLK
08-0645
08-4145
08-4899
08-7899
09-0645
09-4145
08-4899
08-7899
Panigale GP • BLK
08-0646
08-4145
08-4899
08-7899
09-0645
09-4145
08-4899
08-7899
Diavel STD • BLK
08-0670
08-4145
08-4099
08-7899
09-0645
09-4145
08-4899
08-7899
Diavel GP • BLK
08-0671
08-4145
08-4099
08-7899
09-0645
09-4145
08-4899
08-7899
Model • Color
Shift Pedal
Repl. Shift
Shaft
Standard
Pedal Tip
Folding
Pedal TIp
Brake Pedal
Repl. Brake
Shaft
CBR600F2 / F3 1991-98 • SLV
----------
----------
----------
----------
----------
----------
CBR600 F4 1999-00 • SLV
08-0330
08-1199
08-0099
08-7099A
09-0330
09-1330
08-0099
08-7099A
CBR600 F4i 2000-06 • SLV
08-0330
08-1199
08-0099
08-7099A
09-0332
09-1330
08-0099
08-7099A
CBR600RR 2003-06 • SLV
08-0335
08-1335
08-0099
08-7099A
09-0335
09-1099
08-0099
08-7099A
CBR600RR 2007+ • BLK
08-0338
08-4335
08-4099
08-7099
09-0338
09-4330
08-4099
08-7099
NT647 Hawk (Doesn’t work w/Stock Exhaust) • SLV
----------
----------
----------
----------
----------
----------
Standard
Pedal Tip
Folding
Pedal Tip
----------
----------
----------
----------
RC51 • SLV
----------
----------
----------
----------
----------
----------
----------
----------
Honda CBR250 STD • BLK
08-0375
08-4145
08-4899
08-7899
09-0375
09-4145
08-4899
08-7899
Honda CBR250 GP • BLK
08-0375
08-4145
08-4899
08-7899
09-0375
09-4145
08-4899
08-7899
Legend : [1] Designates kit comes with shift pedal.
10
Honda
Foot Controls
Model • Color
CBR1000RR 2004-07 • SLV
Kawasaki
CBR1000RR 2008+ • BLK
Triumph
Rearset Kit
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
Pedals Fit
OEM Bracket?
----------
05-0337B
06-0360
07-28375
----------
1”, .5”
No
05-0339 [1]
05-0339B
06-4301
07-2750
----------
1”, .5”
No
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
EX250 1988-07 • BLK
05-4130
05-4130B
06-4610 (L)
06-4611 (R)
07-0650
----------
1”, 2”
No
EX250/300 2008+ • BLK
05-4131E
05-4131EB
06-4610 (L)
06-4611 (R)
07-0625
----------
1”, 2”
No
EX250 1988-07 • SLV
05-0130
05-0130B
06-0610 (L)
06-0611 (R)
07-0650
----------
1”, 2”
No
EX500 1994+ • SLV
05-0120
----------
06-0300
07-0675
----------
1”, 2”
No
Ninja 650R 2006-08 • BLK
05-4128 [1]
05-4128B
06-4128 (L)
06-4301 (R)
07-1100
----------
Adjustable
No
Ninja 650R 2006-08 • SLV
05-0128 [1]
05-0128B
06-0128 (L)
06-0301 (R)
07-1100
----------
Adjustable
No
Ninja 650R 2009+ • BLK
05-0129 [1]
05-0129B
06-4128 (L)
06-4301 (R)
07-1100
----------
Adjustable
No
05-0100
----------
Pedals Fit OEM
Brackets?
06-0110
07-0850
----------
1”, .5”
No
07-2775
----------
1”, 1”
No
ZX6R 1998-02 • SLV
05-0110
05-0110B
06-0112 (L)
06-0110 (R)
ZZR600 2005-08 • SLV
05-0110
05-0110B
06-0112 (L)
06-0110 (R)
07-2775
----------
1”, 1”
No
ZX6RR / 636 2003-04 • SLV
05-0140
05-0140B
06-0112 (L)
06-0110 (R)
07-2775
----------
.5”, .5”
No
ZX6R / 636 2005-06 • SLV
05-0145
05-0145B
06-0801
07-2625
----------
Adjustable
Yes
ZX6R 2007-08 • BLK
05-0147
05-0147B
06-4801
07-2650
----------
Adjustable
Yes
05-0149 [2]
05-0149B
06-4801
07-2700
----------
Adjustable
No
ZX7R 1991-04 • SLV
05-0100
----------
06-0110
07-0850
----------
1”, .5”
No
ZX9R 1994-97 • SLV
05-0100
----------
06-0110
07-0850
----------
1”, .5”
No
ZX9R 1998-03 • SLV
05-0110
05-0110B
06-0112 (L)
06-0110 (R)
07-2775
----------
1”, 1”
No
ZX10R 2004-05 • SLV
05-0160
05-0160B
06-0801
07-0775
----------
----------
Yes
ZX10R 2006-10 • BLK
05-0165
05-0165B
06-4801
07-2725
----------
----------
Yes
ZX10R 2011+ STD •BLK
----------
05-0168B
06-4801
OEM
----------
Adjustable
Yes
ZX10R 2011+ GP •BLK
----------
05-0169B
06-4801
OEM
----------
Adjustable
Yes
ZX6R 2009+ • BLK
Suzuki
by CFMotorsports
Rearset Kit
Model • Color
ZX6R 1995-97 • SLV
11
Rearset Kits
Rearset Kit
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
Pedals Fit OEM
Brakets?
675 / Street Triple / R STD • BLK
----------
05-0500B
06-4801
07-0875
05-0500HGB
Adjustable
No
675 / Street Triple / R GP • BLK
----------
05-0501B
06-4801
07-0575
05-0500HGB
Adjustable
No
Daytona 675 2013
----------
05-0502B
TBA
TBA
TBA
TBA
TBA
Model • Color
Rearset Kit
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
SV650 1999-02 • SLV
05-0220
05-0220B
06-0200
07-0775
05-0240HGB
1.5”, 1.5”
Yes
SV650 1999-02 High • SLV
05-0222
05-0222B
06-0200
07-0825
05-0240HGB
2”, 2”
Yes
SV650S 1999-02 • SLV
05-0220
05-0220B
06-0200
07-0775
05-0240HGB
.75”, .75”
Yes
SV650S 1999-02 High • SLV
05-0222
05-0222B
06-0200
07-0825
05-0240HGB
1.25”, 1.25”
Yes
SV650 2003 • SLV
05-0224
05-0224B
06-0200
07-0775
05-0240HGB
1.25”, 1.25”
Yes
SV650s 2003 • SLV
05-0224
05-0224B
06-0200
07-0775
05-0240HGB
.75”, .75”
Yes
SV650 2004+ • SLV
----------
05-0224B
06-0200
07-0775
05-0240HGB
1.25”, 1.25”
No
SV650S 2004+ • SLV
----------
05-0224B
06-0200
07-0775
05-0240HGB
.75”, .75”
No
SV650 2003 • BLK
05-4224
05-4224B
06-4200
07-0775
05-0249HGB
1.25”, 1.25”
Yes
Model • Color
Pedals Fit OEM
Brakets?
3-piece Pedals
Triumph
Kawasaki
Honda
by CFMotorsports
Shift Pedal
Repl. Shift
Shaft
Standard
Pedal Tip
Folding
Pedal TIp
Brake Pedal
Repl. Brake
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
CBR1000RR 2004-07 • SLV
08-0335
08-1335
08-0099
08-7099A
09-0335
09-1099
08-0099
08-7099A
CBR1000RR 2008+ • BLK
08-0339
08-4145
08-4899
08-7899
09-0339
09-4330
08-4099
08-7099
Shift Pedal
Repl. Shift
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
Brake Pedal
Repl. Brake
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
EX250 1988-07 • BLK
08-4130
08-4145
08-4899
08-7899
09-4130
09-4330
08-4099
EX250/300 2008+ • BLK
08-4131
08-4145
08-7899
09-4130
09-4330
08-4099
EX250 1988-07 • SLV
08-0130
08-1145
08-0899
08-7899A
09-0130
09-1330
08-0099
EX500 1994+ • SLV
----------
----------
----------
----------
----------
----------
Ninja 650R 2006-08 • BLK
08-4128
08-4199
08-4099
08-7099
09-4128
09-4330
08-4099
08-7099
Ninja 650R 2006-08 • SLV
08-0128
08-2099
08-0099
08-7099A
09-0128
09-1330
08-0099
08-7099A
Ninja 650R 2009 + • BLK
08-4128
08-4199
08-4099
08-7099
09-4128
09-4330
08-4099
08-7099
ZX6R 1995-97 • SLV
----------
----------
----------
----------
----------
ZX6R 1998-02 • SLV
08-0110
08-2099
08-0099
08-7099A
09-0110
09-1099
08-0099
08-7099A
ZZR600 2005-08 • SLV
08-0110
08-2099
08-0099
08-7099A
09-0110
09-1099
08-0099
08-7099A
ZX6R/RR/636 1998-04 • SLV
08-0110
08-2099
08-0099
08-7099A
09-0110
09-1099
08-0099
08-7099A
Model • Color
Model • Color
----------
----------
----------
08-7099
08-7099A
----------
----------
ZX6R/636 2005-06 • SLV
08-0145
08-1145
08-0899
08-7899A
09-0145
09-1330
08-0099
08-7099A
ZX6R/636 2007-08 • BLK
08-0147
08-4145
08-4899
08-7899
09-0147
09-4330
08-4099
08-7099
ZX6R 2009+ • BLK
08-0147
08-4145
08-4899
08-7999
09-0149
08-4247
08-4899
08-7899
ZX7R 1991-04 • SLV
----------
----------
----------
----------
----------
----------
----------
----------
ZX9R 1994-97 • SLV
----------
----------
----------
----------
----------
----------
----------
----------
ZX9R 1998-03 • SLV
08-0110
08-2099
08-7099A
09-0110
09-1099
08-0099
08-0099
08-7099A
ZX10R 2004-05 • SLV
08-0160
08-1335
08-0099
08-7099A
09-0160
09-1330
08-0099
08-7099A
ZX10 2006-10 • BLK
08-0165
08-4145
08-4899
08-7899
09-0165
09-4330
08-4099
08-7099
ZX10R 2011+ STD •BLK
08-0168
08-4145
08-4899
08-7899
09-0168
09-4330
08-4099
08-7099
ZX10R 2011+ GP •BLK
08-0168
08-4145
08-4899
08-7899
09-0168
09-4330
08-4099
08-7099
Shift Pedal
Repl. Shift
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
Brake Pedal
Repl. Brake
Shaft
Standard
Pedal Tip
Folding
Pedal Tip
675 / Street Triple / R STD • BLK
08-0500
08-4145
08-4899
08-7899
09-0500
09-4330
08-4099
08-7099
675 / Street Triple / R GP • BLK
08-0501
08-4145
09-0500
09-4330
TBA
TBA
TBA
TBA
Model • Color
Daytona 675 2013
Suzuki
08-4899
08-7099
Model • Color
Shift Pedal
Repl. Shift
Shaft
08-4899
08-7899
TBA
TBA
Standard
Toe Piece
Folding Toe
Piece
Brake Pedal
Repl. Brake
Shaft
08-4099
08-7099
TBA
TBA
Standard Folding
Toe Piece Toe Piece
SV650 1999-02 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650 1999-02 High • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650S 1999-02 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650S 1999-02 High • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650 2003 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650s 2003 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650 2004+ • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650S 2004+ • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV650 2003 • BLK
08-4200
08-4199
08-4099
08-7099
09-4200
09-4099
08-4099
08-7099
12
Suzuki
Foot Controls
Yamaha
[1] Designates kit
comes with shift
pedal.
13
Model • Color
Rearset Kit
Rearset Kits
by CFMotorsports
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
Pedals Fit OEM
Brakets?
SV650s 2003 • BLK
05-4224
05-4224B
06-4200
07-0775
05-0249HGB
.75”, .75”
Yes
SV650 2004+ • BLK
----------
05-4224B
06-4200
07-0775
05-0249HGB
1.25”, 1.25”
No
No
SV650S 2004+ • BLK
----------
05-4224B
06-4200
07-0775
05-0249HGB
.75”, .75”
SV1000 2003-07 • SLV
05-0226
05-0226B
06-0200
07-0825
05-0240HGB
1.25”, 1.25”
Yes (03 only)
SV1000S 2003-07 • SLV
05-0226
05-0226B
06-0200
07-0825
05-0240HGB
.75”, .75”
Yes (03 only)
SV1000 2003-07 • BLK
05-4226
05-4226B
06-4200
07-0825
05-0249HGB
1.25”, 1.25”
Yes (03 only)
SV1000S 2003-07 • BLK
05-4226
05-4226B
06-4200
07-0825
05-0249HGB
.75”, .75”
Yes (03 only)
GSX-R600 1997-00 • SLV
05-0220
05-0220B
06-0200
07-0775
05-0240HGB
.75”, .75”
Yes
GSX-R600 2001-05 • SLV
05-0240
05-0240B
06-0200
07-0750
05-0240HGB
.5”, .5”
Yes
GSX-R600 2006-10 • BLK
05-0247 [1]
05-0247B
06-4301 (L)
06-4245 (R)
OEM
05-0249HGB
Adjustable
Yes
GSX-R600 2011+ • BLK
05-0250 [1]
05-0250B
06-4301 (L)
06-4245 (R)
OEM
05-0249HGB
Adjustable
Shift Only
GSX-R750 1996-99 • SLV
05-0220
05-0220B
06-0200
07-0775
05-0240HGB
.75”, .75”
Yes
GSX-R750 2000-05 • SLV
05-0240
05-0240B
06-0200
07-0750
05-0240HGB
.5”, .5”
Yes
GSX-R750 2006-10 • BLK
05-0247 [1]
05-0247B
06-4301 (L)
06-4245 (R)
OEM
05-0249HGB
Adjustable
Yes
GSX-R750 2011+ • BLK
05-0250 [1]
05-0250B
06-4301 (L)
06-4245 (R)
OEM
05-0249HGB
Adjustable
Shift only
GSX-R1000 2001-04 • SLV
05-0240
05-0240B
06-0200
07-0750
05-0240HGB
.5”, .5”
Yes
GSX-R1000 2005-06 • SLV
05-0245
05-0245B
06-0245
07-0160
05-0240HGB
.5”, .5”
No
GSX-R1000 2007-08 • BLK
05-0249
05-0249B
06-4245
07-0725
05-0249HGB
Adjustable
No
05-0250 [1]
05-0250B
06-4301 (L)
06-4245 (R)
OEM
05-0249HGB
Adjustable
Shift only
TL1000S • SLV
05-0210
05-0210B
06-0200
07-0850
05-0240HGB
.75”, .75”
Yes
TL1000R • SLV
05-0212
05-0212B
06-0200
07-0750
05-0240HGB
.75”, .75”
Yes
Model • Color
Rearset Kit
Repl. Pegs
Shift Rod
Optional
Heel Guard
Rise Up &
Back
FZR400 / 600 • SLV
05-0410
----------
06-0410
07-0675
----------
1”, 1”
No
R6 1999-02 STD • SLV
05-0440
05-0440B
06-0300 (L)
06-0420 (R)
07-0440
.625”, .625”
Yes
R6 1999-02 GP • SLV
05-0442
05-0442B
06-0300 (L)
06-0420 (R)
07-0442
----------
.625”, .625”
Yes
R6/R6S 2003-05 • SLV
05-0447
05-0447B
06-0300 (L)
06-0420 (R)
07-0445
----------
.625”, .625”
Yes
R6/R6S 2003-05 • BLK
05-4447
05-4447B
06-4300 (L)
06-4420 (R)
07-0445
----------
.625”, .625”
Yes
R6 2006+ STD • BLK
05-0448 [1]
05-0448B
06-4300 (L)
06-4420 (R)
07-21025
----------
.625”, .625”
No
R6 2006+ GP • BLK
05-0449 [1]
05-0449B
06-4300 (L)
06-4420 (R)
07-10625
----------
.625”, .625”
No
R1 1998 STD • SLV
05-0420
----------
06-0420
07-0420
----------
.875”, .5”
No
R1 1998 GP • SLV
05-0422
----------
06-0420
07-0422
----------
.875”, .5”
No
GSX-R1000 2009+ • BLK
Pedals fit OEM
brackets?
R1 1999-01 • SLV
05-0420
----------
06-0420
07-0420
----------
.875”, .5”
No
R1 2002-03 STD • SLV
05-0424
----------
06-0420
07-0424
----------
.875”, .5”
No
R1 2002-03 GP Conversion Kit
08-0424
R1 2004-06 • SLV
05-0425
08-0427
Kit combines with 05-0424 to make GP kit
05-0425B
06-0425
07-0425
Kit combines with 05-0425 to make GP kit
-------------------
No
1”, .5”
----------
Yes
Yes
R1 2007-08 STD BLK*
05-0428 [1]
05-0428B
06-4425 (L)
06-4301 (R)
R1 2007-08 GP • BLK*
05-0429 [1]
05-0429B
06-4425 (L)
06-4301 (R)
07-2115
05-0428HGB
1”, .5”
R1 2009+ • BLK
05-0452 [1]
05-0452B
06-4801
07-2725
05-0452HG
Adjustable
07-0425
05-0428HGB
1”, .5”
Brake only
Brake only
Yes
3-piece Pedals
Yamaha
Suzuki
by CFMotorsports
Shift Pedal
Repl. Shift
Shaft
Standard Toe
Piece
Folding Toe
Piece
Brake Pedal
Repl. Brake
Shaft
SV650s 2003 • BLK
08-4200
08-4199
08-4099
08-7099
09-4200
09-4099
08-4099
08-7099
SV650 2004+ • BLK
SV650S 2004+ • BLK
08-4200
08-4199
08-4200
08-4199
08-4099
08-7099
09-4200
09-4099
08-4099
08-7099
08-4099
08-7099
09-4200
09-4099
08-4099
08-7099
SV1000 2003-07 • SLV
08-0200
SV1000S 2003-07 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
SV1000 2003-07 • BLK
08-4200
08-4199
08-4099
08-7099
09-4200
09-4099
08-4099
08-7099
SV1000S 2003-07 • BLK
08-4200
08-4199
08-4099
08-7099
09-4200
09-4099
08-4099
08-7099
GSX-R600 1997-00 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
GSX-R600 2001-05 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0240
09-1099
08-0099
08-7099A
GSX-R600 2006-10 • BLK
08-0247
08-4247
08-4899
08-7899
09-0247
09-4099
08-4099
08-7099
GSX-R600 2011+ • BLK
08-0247
08-4247
08-4899
08-7899
09-0249
09-4099
08-4099
08-7099
GSX-R750 1996-99 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
GSX-R750 2000-05 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0240
09-1099
08-0099
08-7099A
GSX-R750 2006-10 • BLK
08-0247
08-4247
08-4899
08-7899
09-0247
09-4099
08-4099
08-7099
GSX-R750 2011+ • BLK
08-0247
08-4247
08-4899
08-7899
09-0249
09-4099
08-4099
08-7099
GSX-R1000 2001-04 • SLV
08-0200
08-2099
08-0099
08-7099A
09-0240
09-1099
08-0099
08-7099A
GSX-R1000 2005-06 • SLV
08-0245
08-2099
08-0099
08-7099A
09-0245
09-1099
08-0099
08-7099A
GSX-R1000 2007-08 • BLK
08-0249
08-4199
08-4099
08-7099
09-0249
09-4099
08-4099
08-7099
GSX-R1000 2009+ • BLK
08-0247
08-4247
08-4899
08-7899
09-0249
09-4099
08-4099
08-7099
TL1000S • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
TL1000R • SLV
08-0200
08-2099
08-0099
08-7099A
09-0200
09-1099
08-0099
08-7099A
Model • Color
Standard Folding Toe Pi
Toe Piece ece
Shift Pedal
Repl. Shift
Shaft
Standard Toe
Piece
Folding Toe
Piece
Brake Pedal
Repl. Brake
Shaft
Standard
Toe Piece
Folding Toe
Piece
FZR400 / 600 • SLV
----------
----------
----------
----------
----------
----------
----------
----------
R6 1999-02 STD • SLV
08-0440
08-1440
08-0099
08-7099A
09-0440
09-1099
08-0099
08-7099A
R6 1999-02 GP • SLV
08-0440
08-1440
08-0099
08-7099A
09-0440
09-1099
08-0099
08-7099A
R6/R6S 2003-05 • SLV
08-0440
08-1440
08-0099
08-7099A
09-0445
09-1099
08-0099
08-7099A
R6/R6S 2003-05 • BLK
08-4440
08-1449
08-4099
08-7099
09-4445
09-4099
08-0099
08-7099
R6 2006+ STD • BLK
08-0448
08-1449
08-4099
08-7099
09-0449
09-4099
08-4099
08-7099
R6 2006+ GP • BLK
08-0449
08-1449
08-4099
08-7099
09-0449
09-4099
08-4099
08-7099
R1 1998 STD • SLV
----------
----------
----------
----------
----------
----------
----------
----------
R1 1998 GP • SLV
----------
----------
----------
----------
----------
----------
----------
----------
Model • Color
R1 1999-01 • SLV
----------
----------
----------
----------
----------
----------
----------
----------
R1 2002-03 STD • SLV
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
R1 2004-06 • SLV
08-0425
08-1335
----------
----------
----------
----------
08-7099A
09-0445
09-1099
----------
----------
----------
----------
----------
R1 2007-08 STD • BLK
08-0428
08-4335
08-4099
08-7099
09-0428
09-4330
08-4099
08-7099
R1 2007-08 GP • BLK
08-0429
08-4335
08-4099
08-7099
09-0428
09-4330
08-4099
08-7099
R1 2009+ • BLK
08-0452
08-4247
08-4899
08-7899
09-0452
09-4099
08-4099
08-7099
08-0099
----------
---------08-0099
----------
---------08-7099A
----------
14
Foot Controls
Rearset Accessories
by CFMotorsports
Folding Pedal Tips
Our new pedal folding tip design helps protect the pedals in a crash. The folding design minimizes the tendency to catch, preventing
damage. The stiff internal spring provides a solid feel for shifting, braking and keeps the pedal locked in the forward position where it
belongs. The new rubber tip is easy on your boots and provides extra grip.
NOTE: Our new folding pedals tips can easily be added to any Woodcraft-CFM 3-piece pedal.
Folding Pedal Tips
Part Number
Standard Folding Tip • BLK
08-7099
Standard Folding TIp • SLV
08-7099A
Eccentric Folding TIp • BLK
08-7899
Eccentric Folding Tip • SLV
08-7899A
Eccentric
Add the protection of folding tips to
any Woodcraft rearset kit
Standard
Brake Switches & Pedal Springs
Brake Light Switches
These parts make it possible to retain the rear brake light function when using our Woodcraft Rearset Kits. The switch is pressure activated and replaces
the banjo bolt that connects the rear brake line to the rear master cylinder. Please call if you are unsure of your bike’s thread-type and we’ll gladly
assist you. You may also check out our Application Guides at www.woodcraft-cfm.com.
Pedal Return Springs
For those riders who prefer a positive feel of a return spring when using their rear brake. We offer our Pedal Return Spring Kits which can be fitted to
many of our
Rearset Kits.
Pedal Return Spring Kits
15
Part Number
Brake Light Switch
Yamaha R1, R6 (fits most)
09-7125
Coarse Thread Switch 10x1.25mm
Suzuki (fits most models)
09-7175
Fine Thread Switch 10x1.00mm
“I really like the multiple pieces..easy to fix!”
Part Number
- DL
03-0100
03-0105
Case Covers
Woodcraft Case Covers are designed to add strength, protect your motorcycle and look great. These covers are
meticulously produced in the USA out of the very best materials available. These covers help ensure that when your
bike hits the ground the vital fluids stay inside the motor and the gravel will stay out, allowing you to get back to riding
as soon as possible.
Replaceable Skid Pads
Lightweight
Woodcraft Case Covers feature patented replaceable skid pads
in both stainless steel (for racing durability & ground clearance) or
Double Thick Aluminum (street looks with extra thick protection).
Internally Bolted
A Woodcraft exclusive! These O-ring sealed bolts make sure that a
incident will not leave you drilling out mounting bolts that were ground
smooth in the crash.
Increased
Protection
Attention to Detail
These covers get the extra attention needed to make them lightweight and great looking. A head-turning addition for both street and
race bikes!
Customizable
Any cover can be ordered with any skid pad, meaning you can
customize the cover to suit your bike. Black covers with red pads?
Aluminum with black? Be creative and make your bike an original!
Skid Pads
All of our Case Covers come with either a stainless steel or
aluminum skid pad (default is stainless). You have the option
to choose whatever Skid Plate you’d like in both material and
color!
Patented Replaceable Skid Pads
Internal mounting
Skid Pad bolts
Cover Protectors
Skid Pad
!
Color Code Suffix
Original Stainless
S
Natural Aluminum
A
Black Aluminum
B
Blue Aluminum
C
Red Aluminum
R
Example
For many models, there are covers (like the RSV4 cover below) that
are too big to make a cost effective full cover. For these models,
Woodcraft is making protectors, most complete with our patented skid
pads and industry exclusive high temp rubber pads on the back side!
65-0160S
Notes-
> Important Ordering Instructions:
1) Choose your Cover (black anodized is standard,
some models offered in silver).
2) Select your Skid Pad & add suffix to Part Number.
> If you do not select a Skid Pad a stainless pad will be
sent by default.
> All covers include the gasket (if needed) & Skid Pad
(SS or Aluminim) at no extra cost!
Products for sportbikes that make sense!
16
Case Covers
Ducati
60-0145R
BMW
Aprilia
Legend
Honda
60-0245LB
CC = Crank Cover
CLP = Clutch Cover Protector
IT = Ignition Trigger Cover
S = Stator Cover
CCP = Crank Cover Protector
IG = Starter Idle Gear Cover
OP = Oil Pump Cover
ICP = Ignition Cover Protector
CL = Clutch Cover
SCP=Stator Cover Protector
Cover
Side
Type
Clear
Anodized
Black
Anodized
Gasket
Skid Pad
Stainless
Skid Pad
Aluminum
Left
SCP
----------
60-0740LB
None
65-0249S
65-0249 + suffix
Right
CLP
----------
60-0740RB
None
None
65-0335 + suffix
Cover
Side
Type
Clear
Anodized
Black
Anodized
Gasket
Skid Pad
Stainless
Skid Pad
Aluminum
Left
SCP
----------
60-0750LB
None
65-0249S
65-0249 + suffix
Right
CC
----------
60-0750RB
None
65-0337S
65-0337 + suffix
Model
Cover
Side
Type
Clear
Anodized
Black
Anodized
Gasket
Skid Pad
Stainless
Skid Pad
Aluminum
748/749, 916/996/998/999
Right
CL
----------
60-0640RB
None
65-0249S
65-0249 + suffix
1098 / 1198
Right
CL
----------
60-0640RB
None
65-0249S
65-0249 + suffix
Supersport / Sportclassic
Right
CL
----------
60-0640RB
None
65-0249S
65-0249 + suffix
Multistrada /Hypermotard
Right
CL
----------
60-0640RB
None
65-0249S
65-0249 + suffix
848
Right
CLP
----------
60-0641RB
None
65-0249S
65-0249 + suffix
Monster 696/796/1100
Right
CLP
----------
60-0641RB
None
65-0249S
65-0249 + suffix
1199 Panigale
Right
CL
----------
60-0645RB
None
N/A
65-0645 + suffix
Model
Cover
Side
Type
Clear
Anodized
Black
Anodized
Gasket
Skid Pad
Stainless
Skid Pad
Aluminum
Left
S
----------
60-0335LB
None
65-0240S
65-0240 + suffix
Right
CLP
----------
60-0335RB
None
65-0335S
65-0335S + suffix
Left
S
----------
60-0338LB
None
65-0160S
65-0160 + suffix
Right
CLP
----------
60-0338RB
None
65-0249S
65-0249 + suffix
Model
RSV4
Model
S1000RR
CBR600RR 2003-06
CBR600RR 2007+
CBR1000RR 04-07/
CB1000R 08+
CBR1000RR 2008-09
60-0640L
60-0165RIB
Kawasaki
CBR1000RR 2010+
Model
ZX6RR / 636 2003-04
ZX6RR / 636 2005-06
ZX6R 2007-08
ZX6R 2009+
ZX10R 2006-10
60-0645RB
17
Left
S
----------
60-0337LB
None
65-0160S
65-0160 + suffix
Right
CLP
----------
60-0337RB
None
65-0249S
65-0249 + suffix
Left
S
----------
60-0339LB
None
65-0160S
65-0160 + suffix
Left
SCP
----------
60-0341LCB
None
65-0341
65-0341 + suffix
Right
CLP
----------
60-0339RB
None
65-0249
65-0249 +suffix
Left
SCP
----------
60-0341LCB
None
65-0341
65-0341 + suffix
Right
CLP
----------
60-0339RB
None
65-0249
65-0249 + suffix
Cover
Side
Type
Clear
Anodized
Black
Anodized
Gasket
Skid Pad
Stainless
Skid Pad
Aluminum
Left
S
----------
60-0140LB
61-0140L
65-0240S
65-0240 + suffix
Right
IT
60-0145R
60-0145RB
61-0145R
65-0160S
65-0160 + suffix
Left
S
----------
60-0145LB
61-0145L
65-0240S
65-0240 + suffix
Right
IT
60-0145R
60-0145RB
61-0145R
65-0160S
65-0160 + suffix
Left
S
----------
60-0147LB
61-0147L
65-0160S
65-0160 + suffix
Right
IG
----------
60-0147ROB 61-0147RO
None
None
Right
CCP
----------
60-0147RIB
None
65-0335S
65-0335 + suffix
60-0147LB
61-0147L
Left
S
----------
65-0160S
65-0160 + suffix
Right
IG
----------
60-0147ROB 61-0147RO
None
None
Right
CCP
----------
60-0149RIB
None
None
65-0249 + suffix
Left
S
----------
60-0165LB
61-0165L
65-0440S
65-0440 + suffix
Right
IG
----------
60-0165RB
61-0165R
None
None
Kawasaki
Triumph
Suzuki
60-0249RIB
Model
Cover
Side
Type
Clear
Anodized
Black
Anodized
ZX10R 2008-10
Right
CC
----------
ZX10R 2011+
Right
Left
IT
S
-------------------
S
IT
Clear
Anodized
-------------------
Black
Anodized
60-0500LB
60-0500RB
Right
CLP
----------
Model
Cover
Side
Type
SV650 / S 1999-02
Right
SV650 / S 2003+
Right
Model
675 2006+ / Street Triple / R
60-0165RIB
61-0165RI
65-0160S
65-0160 + suffix
60-0168RB
60-0168LB
61-0168R
61-0168L
65-0160S
65-0160S
65-0160 + suffix
65-0160 + suffix
61-0500L
61-0500R
Skid Pad
Stainless
65-0160S
65-0440S
Skid Pad
Aluminum
60-0160 + suffix
65-0440 + suffix
60-0500RC
None
65-0335S
65-0335 + suffix
Clear
Anodized
Black
Anodized
Gasket
Skid Pad
Stainless
Skid Pad
Aluminum
CL
60-0220R
60-0220RB
None
65-0440S
65-0440 + suffix
CP
----------
60-0224RB
None
TBA
TBA
65-0240 + suffix
Type
Gasket
Left
S
60-0240L
60-0240LB
61-0240L
65-0240S
IG
60-0240R
60-0240RB
61-0240R
None
None
Right
CP
----------
60-0249RIB
None
65-0249S
65-0249 + suffix
Left
S
60-0242L
60-0242LB
61-0242L
65-0240S
65-0240 + suffix
Left Out
S
----------
60-0247LIB
61-0247LI
65-0160S
65-0160 + suffix
None
Left In
IG
----------
60-0247LOB
61-0247LO
None
Left
SCP
----------
60-0247LIC
None
TBA
TBA
Right
CLP
60-0247R
60-0247RB
None
65-0247S
65-0247 + suffix
65-0240 + suffix
GSX-R750 2000-03
Left
S
60-0240L
60-0240LB
61-0240L
65-0240S
GSX-R750 1996-05
Right
IG
60-0240R
60-0240RB
61-0240R
None
None
Right
CP
----------
60-0249RIB
None
65-0249S
65-0249 + suffix
Left
S
60-0242L
60-0242LB
61-0242L
65-0240S
65-0240 + suffix
Left Out
S
----------
60-0247LIB
61-0247LI
65-0160S
65-0160 + suffix
None
GSX-R750 2006+
GSX-R1000 2001-02
GSX-R1000 2001-08
GSX-R1000 2001-08
GSX-R1000 2003-04
GSX-R1000 2005-08
GSX-R1000 2009+
*Needs Oil Seal
Hayabusa/BKing
Yamaha
Skid Pad
Aluminum
Right
GSX-R750 2004-05
Model
R6 2003-05
R6S 2006+
R6 2006+
60-0449LB
Skid Pad
Stainless
GSX-R600 1997-05
GSX-R600 2006+
60-0335LCB
Gasket
GSX-R600 2001-03
GSX-R600 2004-05
60-0335RB
Cover
Side
Left
Right
Case Covers
R1 1998-03
R1 2004-08 & FZ1 06-12
R1 2009+
Left In
IG
----------
60-0247LOB
61-0247LO
None
Left
SCP
----------
60-0247LIC
None
TBA
TBA
Right
Left
Right
Right
Left
Left
Left*
Right
Left
CLP
S
IG
CP
S
S
S
CLP
S
60-0247R
60-0240L
60-0240R
---------60-0242L
---------------------------60-0270LBD
60-0247RB
60-0240LB
60-0240RB
60-0249RIB
60-0242LB
60-0245LB
60-0250LB*
60-0250RB
60-0270LB
None
61-0240L
61-0240R
None
61-0242L
61-0242L
61-0250L
None
61-0270L
65-0247S
65-0240S
None
65-0249S
65-0240S
65-0240S
65-0160S
65-0249S
65-0440S
65-0247 + suffix
65-0240 + suffix
None
65-0249 + suffix
65-0240 + suffix
65-0240 + suffix
65-0160 + suffix
65-0249 + suffix
65-0440 + suffix
Cover
Side
Type
Clear
Anodized
Black
Anodized
Gasket
Skid Pad
Stainless
Skid Pad
Aluminum
Left
S
----------
60-0445LB
61-0445L
65-0160S
65-0160 + suffix
Right
IT
----------
60-0445RB
61-0440R
65-0240S
65-0240 + suffix
Left
S
----------
60-0445LB
61-0445L
65-0449S
65-0160 + suffix
Right
IT
----------
60-0445RB
61-0440R
65-0240S
65-0240 + suffix
Left
S
----------
60-0449LB
61-0449L
65-0440S
65-0440 + suffix
Right
IT
----------
60-0449RB
61-0449R
65-0337S
65-0337 + suffix
Left
S
----------
60-0420LB
61-0420L
65-0160S
65-0160 + suffix
Right
IT
----------
60-0420RB
61-0420R
65-0160S
65-0160 + suffix
Left
ICP
----------
60-0450LB
None
65-0335S
65-0335 + suffix
Right
OP
----------
60-0450RB
61-0450R
65-0440S
65-0440 + suffix
Left
S
----------
60-0452LB
61-0452L
65-0160S
65-0160S + suffix
Right
IT
----------
60-0452RB
61-0452R
65-0337S
65-0337 + suffix
18
Frame Sliders
Frame Sliders are one of the smartest modifications you can make to your bike. From street accidents to 100mph
high-sides, nothing will help prevent costly damage better than a set of Woodcraft Frame Sliders. Our sliders are the
only sliders on the market featuring our patented perpendicular mounting bolt design giving you, great protection,
easy installation and unsurpassed durability.
Solid Slider Puck
Durability
Woodcraft’s patented 2-piece sliders are the most durable sliders
on the market. Our perpendicular mounting bolt allows the slider to
be solid rather than hollow (like other sliders) which provides nearly
50% more material on the road and much longer life.
Hassle Free Replacement
Our 2-piece design, with its perpendicular mounting bolt, means that
after a crash you won’t be digging out a ground down bolt from the
center of a destroyed hollow slider. Our sliders make puck replacement fast and easy thanks to our patented design.
Race Proven
Aprilia
Woodcraft’s experienced racer R&D squad made it clear that sliders
must stick out far enough to protect the bike but not so long they get
ripped off as the bike slides down the road! The end result is all Woodcraft sliders are the ideal length giving you the protection without too
much projection.
Slider Base Kit
Cut OEM
bodywork?
Repl. plastic
puck
RSV/R 2004-09
50-0720
Yes
50-1099
Tuono 2006-09
50-0720
No
50-1099
Slider Base Kit
Cut OEM
bodywork?
Repl. plastic
puck
50-0750
Right Only
50-1399
Model
BMW
RSV4
TBA
Model
S1000RR
Cut OEM
bodywork?
Repl. plastic
puck
50-0660LG
No
50-1660
50-0660STD
No
50-1099
848 / 1098 / 1198
50-0640
Yes
50-1099
848 /1098 / 1198 No Cut
50-0642
No
50-1399
Diavel
50-0670
No
50-1999
Honda
Ducati
Model
Monster 696 / 1100
Slider Base Kit
Slider Base Kit
Cut OEM
bodywork?
Repl. plastic
puck
CBR600F2
50-0300
Yes
50-1099
CBR600 F3
50-0305
Yes
50-1099
CBR600 F4/F4i
50-0330
Yes
50-1099
CBR600RR 2003-06
50-0335
Yes
50-1199
CBR600RR 2007+
50-0338
Yes
50-1199
CBR1000RR 2004-07
50-0337
Yes
50-1099
CBR1000RR 2008+
50-0339
Yes
50-1199
Model
!
19
Perpendicular
Mounting Bolt
Notes-
> Important Ordering Instructions:
1) Order the Slider Base Kit for your model bike
2) Order two (2) Slider Pucks to complete your Kit
Puck Style
Part Number
High Density Plastic (Std)
50-1099
Blue Anodized Aluminum
50-1099C
Chrome Plated Aluminum
50-1099K
Red Anodized Aluminum
50-1099R
Polished Aluminum
50-1099A
CBR Short Plastic
50-1199
Short High Density Plastic
50-1399
> All Kits can use the aluminum pucks except Kits using the 50-1199 pucks.
> Woodcraft recommends the slightly shorter 50-1399 high-density
plastic pucks for many track applications.
“I would recommend these frame sliders to anyone riding a bike on the track. We had 3 crashes at Daytona & they did exactly what they were suppose to. They kept the bike up preventing the frame and engine
covers from being damaged” - Legendar y Ducati Tuner Eraldo Ferracci
Cut OEM
bodywork?
Repl. plastic
puck
SV650/S 1999-02
50-0220
No
50-1099
SV650/S 2003+
50-0224
No
50-1099
50-1399
SV1000/S
50-0226
No
50-1099
Left only
50-1399
GSX-R600 1997-00
50-0200
Yes
50-1099
Yes
50-1099
GSX-R600 2001-03
50-0240
Left only
50-1099
50-0129
Yes
50-1099
GSX-R600 2004-05
50-0240
No
50-1099
50-0160
Yes
50-1099
GSX-R600 2006-07
50-0247
Yes
50-1399
Kawasaki
Cut OEM
bodywork?
Repl. plastic
puck
600RR / 636 2003-04
50-0140
Yes
50-1099
600RR / 636 2005-06
50-0145
Yes
50-1099
ZX6R 2007-08
50-0147
Yes
ZX6R 2009+
50-0149
Ninja 650R 06-08
50-0128
Ninja 650R 2009-11
ZX10R 2004-05
ZX10R 2006-07
50-0165
Yes
50-1399
GSX-R600 2008-10
50-0248
Yes
50-1399
ZX10R 2008-10
50-0167
Yes
50-1399
GSX-R600 2011+
50-0258
Yes
50-1199
ZX10R 2011+
50-0168
No
50-1399
GSX-R750 1996-99
50-0200
Yes
50-1099
Repl. plastic
puck
50-0240
Left only
50-1099
Slider Base Kit
Cut OEM
bodywork?
GSX-R750 2000-03
Model
GSX-R750 2004-05
50-0240
No
50-1099
R6 1999-02
50-0440
Yes
50-1099
GSX-R750 2006-07
50-0247
Yes
50-1399
R6 2003-05
50-0445
Yes
50-1099
GSX-R750 2008-10
50-0248
Yes
50-1399
R6S 2006+
50-0445
Yes
50-1099
GSX-R750 2011+
50-0258
Yes
50-1199
R6 2006-07
50-0449
Yes
50-1099
GSX-R1000 2001-04
50-0240
No
50-1099
R6 2008+
50-0449
Yes
50-1399
GSX-R1000 2005-06
50-0240
Left only
50-1099
R1 2004-06
50-0425
Yes
50-1099
GSX-R1000 2007-08
50-0249
No
50-1399
R1 2009+
50-0452
Yes
50-1099
GSX-R1000 2009+
50-0250
Yes
50-1399
FZ1 2006+
50-0415
No
50-1099
Hayabusa
50-0270
Yes
50-1099
FZ6 2004+
50-0413
No
50-1099
Slider Base Kit
Cut OEM
bodywork?
Repl. plastic
puck
675 / Street Triple / R
50-0500
Yes
50-1099
Speed Triple 2005-10
50-0510
No
50-1099
Speed Triple 2011+
50-0511
No
50-1099
Triumph
Slider Base Kit
Model
Suzuki
Slider Base Kit
Yamaha
Frame Sliders
Model
Model
“Being in the frame alignment business,we see a lot of frame sliders that do more damage than they
prevent. Woodcraft Frame Sliders are designed to protect the frame without causing
unnecessary damage to the mounting points. We won’t sell any other brand.” - Peter Kates GMD Computrack Boston
20
Shark Guard
Made from tough aircraft-grade 6061T6 aluminum and finished with a clear or black anodized finish our Woodcraft
Shark Guards are a slick addition to any motorcycle.
Rivet nut mounted
Inexpensive Insurance
Our Shark Guards are cheap insurance against potential
serious injury. In many crashes your leg has a tendency to dangle
near the rear sprocket. The Shark Guard’s role is to help deflect your
foot out of harm’s way.
Racing Required
Shark Guards are required by top racing organizations around the
world including the AMA Pro Racing series and the World Superbike
series. No matter if this item is required by your local club or not, we
feel it’s a smart item to install.
Ease of Installation
Joel Allen CCS #35
Other guards ask you to drill and tap holes into your stock swingarm.
The average swingarm today is only 4-6mm thick aluminum which can
leave you with mounting holes that easily strip out. Only Woodcraft
supplies two rivet nut inserts and an installation tool with every kit!
21
Shark Guard
Part Number
Shark Guard Kit silver
55-0100
Shark Guard Kit black
55-4100
Replacement Mounting Kit
55-9000
Billet 6061-T6 Aluminum
Included Rivet
Mounting Kit
Tire Warmers
Tire Warmers are a critical tool for any rider that plans on riding the track. We know the last thing you want to be
worrying about before pitting out is whether your tires are up to temp. We set out to build the best tire warmers on the
market. The warmers are loaded with features that make tire warmer use a simple and safe experience, leaving you
to focus on having fun and riding hard!
Quick Disconnect
Quick-Disconnect
When we were talking to our racers about warmer use we couldn’t find
one person who hadn’t seen a warmer damaged when it was
accidentally left plugged in. As a result,Woodcraft brings another
innovation to the table with the first safety disconnect cord ever
used on a warmer. Power to the warmer is cut the moment you
remove it, saving you from expensive and unsafe ‘accidents’!
Power Efficient
Woodcraft’s engineering allows our warmers to run on only 1,000
watts (20% less than the competition) while still supplying maximum
heat. When power gets low the Woodcraft warmers will get you heat
when the others fail.
Heat Retaining Curtains
Months of testing have shown us that heat loss at the edge of the tire
is the greatest factor when it comes to retaining heat from the warmer.
As a result, Woodcraft has solved this problem with our elasticized
insulating fleece side curtains which not only dramatically cut tire
heat loss but also saw a 10 degree gain in rim temperature!
Fleece insulating
sidewalls
Dual Temp Switch
Warmer Sizes
Woodcraft’s tire warmers fit a wide range of tire sizes. Our front warmer will fit
widths from 100-125, and the rear warmer works on sizes from 150-200.
Dual Temp
With its heavy-duty selection switch (Warm 130-140 degrees or Hot 170-180
degrees), quick-disconnect cord, fleece side curtains, and LED power light, the
Dual Temp warmers gives you a lower price-point while still packing all the signature Woodcraft tire warmer innovations.
Heavy Duty Recessed
Hot / Warm Switch
Tire Warmers
Part Number
Dual Temp
30-2100
Replacement Duffle Carry Bag
31-2500
!
Notes> All Tire Warmer purchases include a free Woodcraft duffle carrying case (see p.29)
“I love my warmers... I just watched my buddy burn through another brand when
he left them plugged in. Your design has saved me 2x!” - Chris Ormonde CCS #617
22
Wheel Stands
Solo Operation Front Stand
All stands are the same right? Not exactly. We interviewed top mechanics and asked them what they feel are the
most important features in a stand. The overwhelming responses were: low lift effort, clearance for working, and
wheel design (for ease of rolling and stability). We incorporated these features into our full-range of Woodcraft Wheel
Stands, all proudly built in the USA.
Low Lift Effort
Tough powercoat finish
A stand is your most frequently used tool. Woodcraft stands
are engineered to ensure our stands lift with low physical
effort without sacrificing stability or work space.
Non-slip rubber
skid pads
Stability
Woodcraft stands provide the highest standard in the
Industry for our stand wheels. The quad 4” wheels are
unmatched for both stability and their ability to roll
smoothly over rough surfaces.
Guaranteed for Life
Top quality craftsmanship allows Woodcraft to guarantee all
of our stands against defects in material or workmanship.
We feel that our stand is a tool that should last a lifetime
and we guarantee it.
Coated fender
protecting tip
Stand
Part Number
Front Stand
Pin
22-0100
Part Number
13mm FS101 pin
23-0113
15mm FS101 pin
23-0115
15.5mm FS101 pin
23-0115.5
16.5mm FS101 pin
23-01165
17mm FS101 pin
20-0117
18mm FS101 pin
23-0118
19mm FS101 pin
23-0119
20mm FS101 pin
23-0120
21mm FS101 pin
23-0121
23mm FS101 pin
23-0123
24mm FS101 pin
23-0124
27mm FS101 pin
23-0127
23
Coated Tip
Save that fender! Our coated stand tip keeps your front fender safe.
Adjustable
height
Security
Another Woodcraft touch: Non-slip rubber skid pads on the bottom
of our front stands makes sure the stand, and your bike, stays put.
Adjustability
Our front stands feature and adjustable upper stanchion meaning
you can use your front stand on anything from a RS125 to a GSXR1000.
Quad 4” wheels
“My 12 year old daughter has no problem putting my SV on this stand...perfect.”
- Ted Temple
Wheel Stands
Front Stand pin application chart
Aprilia
Size
Honda (continued)
RS250
16.5
CBR600RR 2007+
Size
13
Suzuki
GSX-R600 1997-05
Size
13
Mille / R
27
NT647 Hawk
24
GSX-R600 2006+
15
Falco / Tuono/V4R ‘12
27
VFR750 / 800
24
GSX-R750 1991-95
24
Tuono Factory 2007+
19
CBR900RR 1993-97
24
GSX-R750 1996-05
13
Factory / R/ RSV$ Factory
19
CBR900RR 1998-99
13
GSX-R750 2006+
15
RSVR/APRC
27
CBR929 / 954
13
GSX-R1000 2001-02
13
Attack Clamps
20
RC51 to 2001
13
GSX-R1000 2003-04
17
RC51 2002+
27
GSX-R1000 2005+
13
BMW
S1000RR
15.5
CBR1000RR to 2007
13
GSX-R1100
24
K5 / K100
21
CBR1000RR 2008+
23
RF600 / 900
24
ST1100
21
SV650 / S 1999-02
21
24
SV650 / S 2003+
Buell
Blast / Cyclone
18
CBR1100XX
S1 / S2 / Lightning
18
Kawasaki
XB9 / XB12
18
EX250 to 2007
1125R
18
EX250 2008+
Ducati
16.5
V-Strom
17
19
TL1000S / R*
13
18
Hayabusa*
13
EX500 1987-93
19
SV1000 / S 2003
13
20
620 - 1000SS
17
EX500 1994+
20
SV1000 / S 2004+
Monster 696
27
ZX6E 1993+
21
Triumph
Hypermotard
27
ZX6R 1995-02
13
Speed Triple / T509 / 595
19
Monster to 2002
17
ZX6RR / RR 2003+
15
Daytona 955i
19
Monster 2003+
27
Ninja 650R
27
TT600 / 675 Daytona
13
Multistrada to 2009
24
ZX7R 1991+
27
Yamaha
748 / 749 Base model
27
ZX9R 1994-97
27
TZ125
15
749R
13
ZX9R 1998+
15
TZ250
13
748S/749S/916/996/998/999
N/A
Z1000
27
RZ350 / 500
19
848
27
ZX10R 2004-07
15
FZR400 / 600 / 1000
21
1098 / 1198
N/A
ZX10R 2008-10
27
Seca II
19
Honda
ZX10R 2011
15
R6S 2006-07
RS125 to 1994
15
ZRX1100
17
R6 2001+
RS125 1995+
13
ZX11 to 1992
20
YZF600 to 1996
RS250
24
ZX11 1993+
27
YZF600 1997-00
CB1
24
ZX12 to 2001
13
YZF600 2001+
CBR250R
21
ZX12 2002+
17
YZF750
CBR600 F1/F2/F3
24
Suzuki
CBR600 F4/F4I
24
GS500
CBR600RR 2003-06
20
GSX-R600 1994-96
!
21
16.5
19
21
16.5
20
R1
16.5
24
FZ1
19
24
FJ1200
19
* = requires front fairing removal
for stand use
Reminder-
> Don’t forget our front stand pins are quick and easy to
remove. Have multiple bikes? Get multiple quick change lift
pins to use with your Woodcraft Front Stand!
“I have been using the same rear stand for over 10 years now!
It just won’t give up!” - James A. Milroy Jr.
24
Wheel Stands
Rear Stands
Woodcraft Wheel Stands are one of the most widely used stands in the industry. Take a look around the pits at an
AMA event or your local club race and chances are that many of the bikes are supported by a Woodcraft Race Stand.
We are also proud to say that all our stands are proudly built in the USA.
Work Clearance
Mechanics appreciate both the easy lift effort and ample
working clearance behind the stand - workseat clearance
is excellent behind the rear wheel!
Tough powdercoat finish
XL Wheels
Woodcraft’s trademark extra large quad 4” wheels are
extremely stable and facilitate both lifting the bike on
rough surfaces and rolling the bike around the shop!
Powdercoat Finish
Woodcraft stands have one of the toughest, most
expensive powder coat finishes available today.
Quad 4” wheels
Stainless steel
skids on bottom
1” steel pivots
Race Stand
Our Race Stand (pictured above) is for use with bikes equipped with swingarm
spools (page 22) and features a wide-mouth deep-V receiver that is easy to line
up and secure upon lifting. Designed at 14” on center it fits most bikes. It is easily
adjustable if it is necessary to be slightly wider or narrower. Simply place the stand
on it’s side and adjust. The position will hold.
Pad Stand
For bikes that aren’t equipped with swingarm spools we offer up our Pad Stand.
Outfitted with 1” diameter solid steel lift pivots that roll easily and won’t bend or
break like other stands. Our pivots have super tacky rubber pads to prevent
slippage and Teflon-coated bushing to keep the stand operating smoothly. The
Pad Stand is fully-adjustable from 11-14”.
Rear Stands
25
Part Number
Race Stand
25-0100
Pad Stand
25-0200
Walt Seigl Motorcycles
Super tacky
rubber pads
We do customer service! Have a question? Give us a ring 978-297-2977
Wheel Stands
Swingarm Spools
Small Parts - Big Difference
Sometimes it’s the little things that make all the difference. Woodcraft
Swingarm Spools have wide grooves that make
locating the stand easier and raised lips on either side that give them
unparalleled stability.
Race Protection
For racing applications the Woodcraft Delrin Swingarm Slider is our
spool of choice. The thick plastic offers extra protection in the case of
a crash and incorporates the secure raised edges that our spools are
known for.
Street Finish
Our Swingarm Spools also are available in a anodized
aluminum finish for that factory-look. Four color choices to
create a unique look for your bike.
Delrin Swingarm Slider
Part Number
6mm Titanium
27-0600
6mm Black
27-0600B
6mm Blue
27-0600C
6mm Red
27-0600R
8mm Titanium
27-0800
8mm Black
27-0800B
8mm Blue
27-0800C
Part Number
6mm
27-3600
8mm
27-3800
8mm w/ 2 offset
27-3801
10mm
27-3100
10mm w/ 1 offset
27-3110
10mm w/ 2 offset
27-3120
Extra-protective
Delrin Spools
Aluminum Swingarm Spools
Common Spool Applications
Hard anodized aluminum
Raised lips
Wide grooves
Size (mm)
Common Spool Applications
Size (mm)
Aprilia RS250
6mm
Kawasaki ZX10R 2004-05
10mm w/1 offset
Aprilia Mille
10mm w/2 offset
10mm w/2 offset
Aprilia Tuono/RSV4
6mm
Kawasaki ZX10R 2011
8mm
BMW S1000RR (need spacer both sides)
8mm*
Kawasaki ZRX1100/1200
Honda CBR600RR 2003-06
8mm
Kawasaki Z1000
10mm
Honda CBR600RR 2007+
8mm*
KTM 990 SuperDuke
10mm
Honda CBR929/954/1000RR
8mm
KTM RC8
8mm
Honda RC51
8mm
KTM 690 Duke
10mm
Kawasaki EX250 2008+
10mm
Suzuki - All Modern Models
8mm
Kawasaki EX650R 2006+
10mm w/1 offset
Suzuki B-King
8mm*
Kawasaki ZX6R/636 1998-04
10mm w/1 offset
Tri Daytona 675 / Street Triple (to ‘10)
6mm
Kawasaki ZX6R/RR 2005-06
10mm w/2 offset
Tri Daytona 675 / Street Triple (11+)
8mm
Yamaha FZR
10mm
Yamaha R1 / R6
6mm
Yamaha FZR
10mm
Kawasaki ZX6R 2009+
10mm
10mm w/2 offset
Kawasaki ZX9 1998-03
10mm
10mm w/2 offset
* = requires spacer Part # 27-27spacer on standard spools
26
Armour Bodies
Bodywork
When you want the best in bodywork you want Armour Bodies. In Roadracing World’s test that
featured the top 9 brands of bodywork Armour Bodies finished at the front of every major category! With “exceptional
fit”, finish, and offering “zero damage when flexed” you can see why Armour Bodies is a real “showstopper”.
Pro Series
This bodywork put Armour
Bodies on the map in the US market.
Pro Series fit, finish, flexibility and crash worthiness has made it an industry leader. This is anything but just
another bodywork set. The quality is apparent as soon as you pull it out of the box.
SPECIAL RESIN
Armour Bodies uses a special resin derived from the kayak industry. Originally created to
withstand rocky impacts, our specially formulated resin provides superior flexibility and
weight savings. This resin also has a very low shrinkage ratio, ensuring a perfect fit.
FINISH
We spend more time finishing our bodywork than any other manufacturer in the industry.
Every kit is meticulously finished, filling holes and sanding edges to insure a perfect
surface on every kit. The bodywork is ready to paint with just a light scuff, saving you
time and money in the booth.
Carbon Kevlar Reinforcement
FULL SHEET FIBERGLASS
Each kit is assembled from a full sheet of fiberglass allowing for the strongest, lightest bodywork possible.
Other manufacturers save money using scraps of fiberglass in their kits, making them heavier and brittle.
Pro Series bodywork will often survive a crash that would leave some other bodywork in
pieces.
CARBON/KEVLAR REINFORCEMENT - An Armour Bodies Exclusive
Armour Bodies has raised the bar once again by adding Carbon/Kevlar reinforcements to all the mounting areas at no extra
cost. These reinforcements help prevent cracking at the mount points during a crash, keeping your bodywork intact and on the
bike where it belongs. Our flexibility, finish, fit and price set us apart from all others.
Built out of the best
materials available
Urethane primer
ready to paint
High precision molds
mean great fit
“The racer’s budget means many of us do our own paintwork & fiberglass repairs...
My Armour Bodies came ready to paint & sustained a lowside & multi-bike crash with
minimal damage, giving me more time on the track than in the garage” - Kitt Carella LRRS #53
27
#54 Roger Lee Hayden National Guard Suzuki
Armour Bodies
Armour Bodies is used by top teams throughout the world including Team Fast by Ferracci, Celtic
Racing, Jordan Suzuki, National Guard Suzuki, Parkalgar Honda and many more.
Custom Seat Foam Pads
Our custom seat foam is cut for each Armour Bodies superbike tail. Each pad is made
from 15mm thick, high density foam with special 3M adhesive backing to keep it securely in
place. All of the edges have been smoothed and beveled for a finished, factory look.
> Please call for more information
> Available for all Armour Bodies SB Kits
Dzus Fasteners
Sold in sets of six (6), these clip-style fasteners
work great to secure upper & lower fairings, under
drafts and many other fairing connections. Top
quality genuine Dzus product.
Custom Seat Foam
03-06 Honda
CBR600
08+Yamaha
R6
07-08 Kawasaki
ZX6R
03-05 Yamaha
R6
Seat Foam examples
Product
Part Number
Dzus Kit Clip Style (6pk)
71-6099
Rivet Style (6pk)
71-7099
“Unbelievably crash resistant and fitment is the easiest I’ve experienced”
- Gerry Signorelli
28
Armour Bodies
Bodywork
Full Coverage
Armour Bodies kits include: upper fairing, lower fairing, front fender, tail
section (either SS or SB), and a draft shield (when applicable).
All of these pieces are available separately. (see Legend at left)
29
Part Suffix
Legend
Part Suffix
Fender
F
Seat Pad Foam
PAD
Upper
U
Draft Shield
D
Lower
L
Tank Cover
SB Tail
TSB
SS Tail
TSS
Example
TC
71-0750F
Fender
Lower
SS Tail
(uses stock seat)
Upper
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
71-0700SS
71-0705SS
-------------------
71-0700U
Model
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
S1000RR 09-11
71-0750SS
71-0750SB
71-0750U
71-0750L
71-0750TSS
71-0750TSB
S1000RR Stock Exhaust
71-0751SS
71-0751SB
71-0750U
71-0751L
71-0750TSS
71-0750TSB
S1000RR 12+
71-0752SS
71-0752SB
71-0750U
71-0750L
----------
71-0752TSB
S1000RR Stock Exhaust
71-0753SS
71-0753SB
71-0750U
71-0751L
----------
71-0752TSB
Model
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
748 / 996 / 998
71-0610SS
----------
71-0610 U
71-0610L
71-0610TSS
----------
749 / 999
71-0625SS
----------
71-0625U
71-0625L
71-0625TSS
----------
848 / 1098 / 1198
71-0640SS
71-0640SB
71-0640U
71-0640L
71-0640TSS
71-0640TSB
1199 Panigale
71-0645SS
71-0645SB
71-0645U
71-0645L
71-0645TSS
71-0645TSB
Model
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
CBR600 F4i
Model
RS250
RS50
RSV4
71-0705U
ReplaceReplacement Lower ment Tail SS
71-0700L
71-0705L
TBA
71-0700TSS
71-0705TSS
Replacement
Tail SB
------------------Replacement
Tail SB
Replacement
Tail SB
Replacement
Tail SB
SB Tail
(includes seat support & can use foam
seat pad)
Notes
Special order only
Special order only
Notes
Notes
Optional Superbike Air Duct Avail.
Suffix- BADL & BADR (left/right)
Notes
71-0332SS
----------
71-0332U
71-0332L
71-0332TSS
----------
CBR600RR 2003-04
----------
71-0335SB
71-0335U
71-0335L
----------
71-0335TSB
Includes tank cover & air inlets
CBR600RR 2005-06
----------
71-0336SB
71-0336U
71-0336L
----------
71-0336TSB
Includes tank cover & air inlets
CBR600RR 2007-08
71-0338SS
71-0338SB
71-0338U
71-0338L
71-0338TSS
71-0338TSB
Includes tank cover
CBR600RR 2009-12
71-0348SS
71-0348SB
71-0348U
71-0348L
71-0338TSS
71-0338TSB
Includes tank cover
CBR600RR 2013
71-0349SS
71-0349SB
71-0349U
71-0349L
71-0349TSS
71-0349TSB
Includes tank cover
CBR1000RR 2004-05
71-0337SS
----------
71-0337U
71-0337L
71-0337TSS
----------
Includes tank cover
CBR1000RR 2008-11
71-0339SS
71-0339SB
71-0339U
71-0339L
71-0339TSS
71-0339TSB
Includes tank cover
CBR1000RR 2012
71-0341SS
71-0341SB
71-0341U
71-0341L
71-0339TSS
71-0339TSB
Includes tank cover
RC51
----------
71-0340SB
71-0340U
71-0340L
----------
71-0340TSB
Tail designed for HRC subframe
Model
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
Replacement
Tail SB
Ninja EX250 2008+
71-0130SS
----------
71-0130U
71-0130L
71-0130TSS
----------
ZX6RR / 636 2005-06
71-0145SS
71-0145SB
71-0145U
71-0145L
71-0140TSS
71-0140TSB
ZX6RR / 636 2007-08
71-0147SS
71-0147SB
71-0147U
71-0147L
71-0147TSS
71-0147TSB
ZX6R 2009-12
71-0149SS
----------
71-0149U
71-0149L
71-0149TSS
----------
ZX6R 2013
71-0150SS
71-0150SB
71-0150U
71-0150L
71-0150TSS
71-0150TSB
ZX10R 2006-07
71-0165SS
71-0165SB
71-0165U
71-0165L
71-0165TSS
71-0165TSB
ZX10R 2008-10
71-0167SS
71-0167SB
71-0167U
71-0167L
71-0167TSS
71-0167TSB
ZX10R 2011+
71-0168SS
71-0168SB
71-0168U
71-0168L
71-0168TSS
71-0168TSB
Notes
Kits in RED ship in oversize boxes and are not eligible for flat rate shipping discounts
Kawasaki
Honda
Ducati
BMW
Aprilia
Legend
Pro Series
SB Kit
Replacement
Upper
TBA
TBA
TBA
Model
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
675 06-12
71-0500SS
----------
71-0500U
71-0500L
71-0500TSS
----------
675 2013
TBA
TBA
TBA
TBA
TBA
----------
Model
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
SV650/S 1999-02
71-0220SS
----------
71-0220U
71-0220L
71-0220TSS
SV650/S 2003+
Model
F4 2013`
TBA
TBA
Sig. Series
Parts
Notes
TBA
Sig. Series
Parts
Replacement
Tail SB
----------
Notes
Requires 06-08 windscreen
Notes
Includes 4-piece mount kit
Uses 650 S model windscreen
71-0224SS
----------
71-0224U
71-0224L
71-0224TSS
----------
GSX-R600 2001-03
----------
71-0240SB
71-0240U
71-0240L
----------
71-0240TSB
GSX-R600 2004-05
71-0242SS
71-0242SB
71-0242U
71-0242L
71-242TSS
71-0242TSB
SB Tail & UFM hardware incl.
GSX-R600 2006-07
71-0247SS
71-0247SB
71-0247U
71-0247L
71-0247TSS
71-0247TSB
GSX-R600 2008-10
71-0248SS
71-0248SB
71-0248U
71-0248L
71-0248TSS
71-0248TSB
UFM hardware kit incl.
GSX-R600 2011
71-0258SS
71-0258SB
71-0258U
71-0258L
71-0258TSS
71-0258TSB
GSX-R750 2000-03
----------
71-0240SB
71-0240U
71-0240L
----------
71-0240TSB
GSX-R750 2004-05
71-0242SS
71-0242SB
71-0242U
71-0242L
71-0242TSS
71-0242TSB
GSX-R750 2006-07
71-0247SS
71-0247SB
71-0247U
71-0247L
71-0247TSS
71-0247TSB
SB Tail & UFN hardware incl.
GSX-R750 2008-10
71-0248SS
71-0248SB
71-0248U
71-0248L
71-0248TSS
71-0248TSB
UFM hardware kit incl.
GSX-R750 2011
71-0258SS
71-0258SB
71-0258L
71-0258L
71-0258TSS
71-0258TSB
GSX-R1000 2005-06
71-0245SS
71-0245SB
71-0245U
71-0245L
71-0245TSS
71-0245TSB
GSX-R1000 2007-08
71-0249SS
71-0249SB
71-0249U
71-0249L
71-0249TSS
71-0249TSB
SB Tail incl. mount hardware
GSX-R1000 2009+
71-0250SS
71-0250SB
71-0250U
71-0250L
71-0250TSS
71-0250TSB
Kit includes side panels
Model
Pro Series
SS Kit
Pro Series
SB Kit
Replacement
Upper
FZR 600 89-98
71-0415SS
----------
71-0415U
71-0415L
Replacement
Tail SB
71-0415TSS
----------
R6 1999-02
71-0440SS
----------
71-0440U
71-0440L
----------
71-0440TSB
R6 2003-05
71-0445SS
71-0445SB
71-0445U
71-0445L
71h0445TSS
71-0445TSB
R6 2006-07
71-0448SS
71-0448SB
71-0448U
71-0448L
71-0448TSS
71-0448TSB
R6 2008+
71-0449SS
71-0459SB
71-0449U
71-0449L
71-0449TSS
71-0459TSB
R1 2002-03
71-0420SS
----------
71-0420U
71-0420L
71-0420TSS
----------
R1 2004-06
71-0425SS
----------
71-0425U
71-0425L
71-0425TSS
----------
R1 2007-08
71-0428SS
71-0428SB
71-0428U
71-0428L
71-0428TSS
71-0428TSB
R1 2009+
71-0452SS
71-0452SB
71-0452U
71-0452L
71-0452TSS
71-0452TSB
Notes
Includes tank cover
Includes necessary brackets
Includes tail mount spacer
Can’t use stock windscreen
#23 Ben Bostrom Jordan Suzuki
Yamaha
Pro Series
SS Kit
Triumph
Bodywork
Suzuki
MV Agusta
Armour Bodies
30
Axle Sliders
The 5 Second Slider
Hexed slider
base acts as a
axle removal
tool.
Our new line of axle sliders features a Quick Realese that adds no
more than 5 seconds to a wheel change. They are designed so
that only 1 puck needs to come off to remove the axle. Simply pull
the pin and the puck comes right off. If you ever need to change a
puck after a fall, it’s the fastest repair you’ll ever make!
Solid slider
top
Protection
Axle sliders help to protect valuable components like fork lowers
and swingarms in the case of a crash. The patent pending puck
design is made from the same high grade plastic as our frame
sliders and offers better protection than hollow sliders. Combine
with Woodcraft rearsets, engine covers and frame sliders for
ultimate crash protection.
Quick release
pin for fast
slider removal
Style
Not only do Woodcraft axle sliders provide great protection they also
are a great looking upgrade to any motorcycle. These sliders add
style and protection that will help set your motorcycle apart from the
crowd.
Make & Model
Front Axle Kit
Aprilia RSV4
TBA
Make & Model
Suzuki GSX-R600 2006-07
Front Axle Kit
45-1248F
Rear Axle Kit
TBA
BMW S1000RR
45-1750F
45-1750R
45-1248F
TBA
Ducati 848/1098/1198
45-1640F
------------
45-1248F
45-1248R
Ducati Panigale
45-1640F
------------
45-1248F
45-1248R
Ducati Diavel
45-1640F
------------
Suzuki GSX-R600 2011+
45-1258F
45-1258R
Ducati Streetfighter/Hypermotard
45-1640F
------------
45-1258F
45-1258R
Honda CBR600 F4/F4i
45-1330F
45-1330R
45-1248F
45-1249R
45-1338F
45-1248F
TBA
TBA
TBA
Honda CBR600RR 2013
31
Rear Axle Kit
TBA
TBA
45-1338R
TBA
45-1337F
45-1337R
Yamaha R6 2003-05
45-1449F
45-1449R
Kawasaki ZX6R 2007+
45-1149F
45-1149R
Yamaha R6 2006+
45-1449F
45-1449R
TBA
45-1168R
Yamaha R1 2004-2006
45-1449F
45-1449R
45-1149F
45-1168R
Yamaha R1 2007+
45-1449F
45-1452R
Kawasaki ZX10R 11+
45-1149F
45-1169R
Triumph 675
45-1500F
45-1500R
!
More Models Coming-
> This is just a partial listing of bikes and kits available that will be available. We will be offering more applications
throughout the 2013 season. If your bike isn’t listed please call and we’ll be happy to assist you: 978-297-2977
Klucky Pucks
The staff at Woodcraft has been racing for a long time and have always felt that “Klucky Pucks” were the best in
the business. We thought that this product line would be the perfect addition to the Woodcraft family and when the
opportunity arose to add Klucky Pucks to our company we jumped at the chance!
Ranked #1
In recent years Roadracing World magazine did a
comprehensive comparison of all the knee sliders on the
market and Klucky Pucks came out Number 1.
Durability
Pucks need to last; plain and simple! Klucky Pucks are
constructed with a compound developed through years of
experience, resulting is a puck that last longer than the
competition while maintaining the feel that racers need.
Security
Jake Vader
If your kneepucks get knocked off while on the track you’re in
for a long day, and some leather repair. Klucky Pucks have the
toughest velcro on the market, bar none!
Color
Part Number
Black
95-0100
Blue
95-0200
Yellow
95-0300
Red
95-0400
White
95-0500
Black Rain Puck
95-0101
A Top Seller!
Rain/ Endurance Pucks
Our new rain pucks are double the thickness
to provide greater feel in wet condtions. Made out
of our trademark plastic compound these pucks
are designed to last.
(Our rain puck vs. standard puck.)
What do the Pro’s say?
“Your pucks are the very best I’ve come across..”
- Chris Carr
Christian Smutnick #316
“Your sliders last longer & slide smoother...without grabbing the pavement when I plant my knee” - Steve Crevier
“These pucks last longer and stay on better than any puck I’ve ever
tried” - Jeff Wood
“19 pucks tested, Overall comparison test winner”
- Chris Ulrich
“After a whole year of abuse I’ve yet to replace my Klucky Pucks..& I got them used!”- Pete Gaboriault LRRS #187
32
Ceramic Bearings
Wheel & Engine Kits
How do you get that Factory-Race bike advantage? One of the secrets is ceramic bearings that are used in nearly every AMA
Superbike, World Superbike, MotoGP, and Professional Drag Race motor around the world! Less weight, less friction and
less surface wear equals more horsepower in your
motor, simple as that.
Reduced Rotating Mass
The ceramic balls in these hybrid bearings are over 60%
lighter than their steel counterparts resulting in faster
acceleration and reduced inertial loads.
Low Friction - Less Vibration
The coefficient of friction for the ceramic balls is an
average of 3x’s lower than steel. When you combine this
with the high tolerances for roundness you get a bearing that
has dramatically lowers vibration levels and produces more
horsepower.
Preservation
Due to the unique properties of the ceramic balls these
bearings have vastly reduced surface wear when compared
to steel balls. The reduction in wear eliminates a large portion of the oil
contaminates, thus prolonging lubricant life.
Make & Model
Engine Kit
Wheel Kit
Make & Model
Engine Kit
Wheel Kit
20-0335E
20-0335W
20-0247E
20-0247W
20-0338E
20-0338W
20-0240E
20-0240W
20-0337E
20-0337W
20-0247E
20-0247W
20-0339E
20-0339W
20-0245E
20-0245W
Kawasaki ZX6R / 636 2005-06
20-0145E
20-0145W
20-0249E
20-0249W
20-0147E
20-0147W
20-0250E
20-0250W
Kawasaki ZX6R 2009+
20-0149E
20-0149W
Yamaha R6 2003-05
20-0445E
20-0445W
20-0160E
20-0160W
Yamaha R6 2006+
20-0449E
20-0449W
Kawasaki ZX10R 2006+
20-0165E
20-0165W
Yamaha R1 2004-2006
20-0425E
20-0425W
Suzuki SV650 / S 1999-02
20-0220E
20-0220W
Yamaha R1 2007-08
20-0428E
20-0428W
Yamaha R1 2009+
20-0452E
20-0452W
Suzuki SV650 / S 2003+
20-0224E
20-0224W
20-0240E
20-0240W
!
Note-
> This is just a partial listing of bikes and kits
available. We offer Engine and Wheel kits for most makes
and brands. If your bike isn’t listed please call and we’ll be
happy to assist you: 978-297-2977
Real World Results
How do our Ceramic Bearing Kits perform in the Real World? To find
out we compared results in a 2005 Yamaha R6 drag bike before and
after with our Engine and Wheel kits installed. Post-installation the R6
ran a average .15 seconds quicker and had gained 2-3mph through
the trap!
33
Apparel
& Accessories
Heading out for a Bike Night or need something to keep you warm for those chilly paddock nights? Woodcraft offers
up some options to keep you looking good both on and off the bike.
Woodcraft “W-Hoodie” embroidered
heavyweight sweatshirt
Woodcraft “Make Sense” tshirt
(back)
Woodcraft “Make Sense” tshirt
T-Shirt
Part Number
Hoodie
Part Number
Decals
Part Number
Other
Part Number
Small
99-0100S
Small
99-0200S
5.25” x 1.375”
99-0525/0625
Beanie
99-0300
Medium
99-0100M
Medium
99-0200M
5.25” x 1.375”
“Made in USA”
99-0625
Duffel Bag
31-2500
Large
99-0100L
Large
99-0200L
10.625” x 2.813”
99-010625
Banner 12”x60”
99-BANNER
Patch
99-PATCH
Xtra-Large
99-0100XL
Xtra-Large
99-0200XL
14.375” x 3.875”
99-014375
Double XL
99-0100XXL
Double-XL
99-0200XXL
Armour Bodies
99-0725
99-0525
Woodcraft Duffel Bag
16” x 10” x 12”
99-0625
Armour Bodies decal
2.75” x 3.50”
Woodcraft Pit Banner
60” x 12”
Top
Woodcraft decal
5.25” x 1.375”
10.625” x 2.813”
14.375” x 3.875”
Bottom
Woodcraft patch
5.375” x 1.5”
Black
99-0300
Blue
99-0301
Detail
Woodcraft embroidered beanie
Olive
99-0302
Thank you for choosing Woodcraft. Keep the rubber side down!
Plum
99-0303
34
Sportbike Products that Make Sense!!
Terms & Conditions
Ordering
Bodywork
Tire
Warmers
Phone: 978-297-2977
Monday - Friday 9:00am to 5:00pm EST
Fax: 24 hours at 978-297-2922
Online: 24 hours at http://www.woodcraft-cfm.com
(both Dealer and Retail accounts available)
Payment Terms
All orders will be shipped prepaid unless other
arrangements have been made. Personal checks are
not accepted. Credit card orders must be shipped to the
billing address of the credit card.
Returns
No item will be accepted without prior approval. All
returns must be authorized within fifteen (15) days of
receipt of order. All returns must be accompanied with
a return authorization (RA) number and must be in
new and unused condition. All returns are subject to
a restocking fee of 20%. Returns must have a clearly
marked RA number and customer name on the outside
of the box. No returns will be accepted on close-out or
special order items.
Liability
The items in this catalog are intended for racing use
and may render some vehicles illegal for street riding in
some States. The purchaser is responsible for familiarity
with the local and national laws pertaining to the use
of any Woodcraft products. The purchaser of any part
releases the manufacturer of those parts and Woodcraft
from all liabilities pertaining to the use of the parts. The
purchaser recognizes that any modifications to any
motorcycle can increase the risk of an accident and/or
injury and may also render the motorcycle illegal for use
on public roads. Installation of all Woodcraft products
should be performed by trained professionals.
Warning
Installation and use of some Woodcraft Technologies,
Inc. products will change the response of the motorcycle
to rider control inputs. Failure of the rider to adapt to
these changes may cause loss of control and serious
injury or death. Improper installation and/or failure to
comply with all warning and instructions may cause a
loss of control and serious injury or death. Do not install
or use any Woodcraft Technologies, Inc. product
if you are unable to do so in compliance of all
instructions and warnings. Seek the assistance of a
trained professional technician.
105 Baldwinville Rd
Winchendon, MA 01475
Front
Axle
Sliders
Lever
Guards
Clipons
Frame
Sliders
Cover
Protectors
Engine
Covers
Rearsets
Swingarm
Spools
Shark
Guard
Rear
Axle
Sliders
Stands
Seat
Pads
Phone: 978-297-2977
Fax: 978-297-2922
[email protected]

Technologies Inc. - LTMC-SHOP

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

LSP Parkland 27 (8.5x11 South Parkland Estates) 15JAN09.cdr

2016-2017 Catalog

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

June 3, 2014 - MD of Bonnyville

Saebo Evaluation and Treatment Kit

Gravlax Kit Guide and Information

LGOBO SALE SHEET

The wardrobe malfunction — it`s a Hollywood moment that

customchrome.com FIND A DeALer NeAr You customchrome.com