Most Advanced PICMG SBC Based on Dual Intel® P

Transcription

Most Advanced PICMG SBC Based on Dual Intel® Pentium® III Processors
with Intel Graphics and Ethernet Solutions (RIMM memory Supported)
Support Socket 370 Dual Pentium® III
processor up to 800MHz or 1GHz
◆ Support two channel RDRAM memory
up to 2GB
◆ Support C&T 69000 chip
◆ On board Intel 82559 10/100 base-T
Ethernet
◆ Support Ultra DMA/33/66 IDE mode
◆ Fully compliant with PCI Bus spec V2.2
◆ Full-sized all-in-one SBC with PICMG
2.0 compliant
◆ Reserve space around IDE interface
connector to fit DOM (Disk-On-Module)
◆ Fully support ATX function with WOL,
Modem-Ring On, K/B & Mouse wake-up
◆ ISA64 driving capability
◆
World's First Fully Integrated SBC with AGP Display, 10/100 Base-T Ethernet and
Ultra-160 SCSI Functions
Support Socket 370 type Intel® Pentium III
or Celeron™ processors with Bus clock up
to 133 MHz
◆ Support up to 512MB (max.) of SDRAM
◆ Intel 82559 10/100 Base-T Ethernet
◆ Adaptec 7892 Ultra-160 SCSI on board
◆ Support 2D/3D graphics display
◆ Support Ultra DMA33/66 IDE mode
◆ Fully PCI Bus spec V2.2 compliant
◆ Full-sized all-in-one SBC with PICMG 2.0
compliant
◆ eserve space around IDE interface
connector to fit DOM (Disk-On-Module)
◆ Fully support ATX function with WOL,
Modem-Ring On, K/B & Mouse wake-up
◆ Support 4MB Video display cache memory
◆
* All brand names and trademarks are the
properties of their respective owners.
* Specifications are subject to change
without notice.
World's First PICMG Dual-processor AIO SBC, Based on the Pentium® III Xeon™ Processor
Support 100MHz FSB Slot 2 Pentium® III Xeon™ processors
up to 500MHz
◆ Adopt specially designed CPU braces to make the board
more rugged
◆ Intel® 440GX AGPset supports up to 2GB SDRAM with
100MHz memory bus
◆ ECC (Error Checking & Correction) & DIMM SPD (Serial
Presence Detect)
◆ One DiskOnChip socket for booting Windows NT directly
◆ System monitoring and protection support
◆ Support three VRM 8.3 to have the best stability
◆
"Intel Applied Computing Platform Provider" is a marketing program from Intel.
Please visit the following web site for detail:
http://developer.intel.com/platforms/applied/acpp/providers.htm
Advanced PICMG SBC with On-board AGP VGA,
Based on the Dual Socket 370 Processor
Advanced PICMG Dual-processor SBC with ISA64,
Based on the Intel®Pentium® III Processor
Support dual Socket 370 Celeron™ processors
to FC-370 with bus clock up to 100MHz
◆ Support 1GB Max. SDRAM with ECC function
◆ Full-sized AIO SBC with PICMG 2.0 compliance
◆ Fully compliant with PCI Bus spec. V2.1
◆ PC'98 & Year 2000 compliant
◆ One bulit-in DOC socket for flash memory disk
Support dual Slot 1 processors with bus clock up
to 100MHz
◆ Support 1GB Max. SDRAM with ECC function
◆ Adopt special SBC holding architecture and
thermal solution to make the board more rugged
◆ Support DOC, DOM and ATX function
◆
◆
Advanced PICMG SBC with on-Board AGP VGA,
Based on the Pentium® III Processor
Supports single Slot 1 processors with bus clock up
to 100MHz
◆ Support up to 512MB Max. SDRAM with ECC
memory support
◆ Support AGP VGA/Panel display up to 4MB VRAM
◆
High-integrated AIO SBC, Based on the Intel ® Pentium® III
or Celeron™ Processor
Intel® 440BX AGPset supports 66/100MHz FSB for
Socket 370 type Pentium ® III processors up to 800MHz
◆ Support Celeron™ processors up to 600MHz
◆ On-board AGP VGA with 2MB VRAM inside and
10/100 Base-T Ethernet
◆ On-board 4 DIMM sockets support up to 1GB of system
memory
◆ PC'98, PICMG 2.0 and PCI V2.1 industrial standard
compliant
◆ One DOC socket supports up to 144MB flash memory disk
◆ Adopt DS1687 RTC to support real Y2K compliance
◆ System monitoring and protection
◆
Full Function SBC with Ultra 2 wide SCSI, AGP VGA/100
BaseT Ethernet, Based on the Pentium ® III Processor
Real Rugged SBC with Flash Disk Bank,
Based on the Pentium® III Processor
◆
Intel® Pentium III processors (Solt 1) up to 700MHz
Intel® 440BX AGPset supports up to 1GB SDRAM
with 100MHz memory bus and ECC function
◆ Adopts flush mounted Slot 1 processor architecture
◆ ATI Rage Pro AGP display with 4MB/8MB VRAM
◆ Intel 82558 10/100 Base-T Ethernet
◆ Adaptec 7890 Ultra 2 wide SCSI, fastest disk I/O for
80MB/S
◆ Supports system monitoring & protection, ATX
power control and Real H/W Y2K compliant RTC
◆
◆
◆
Intel® Pentium III processors (Slot 1) up to 700MHz
Intel® 440BX AGPset supports up to 512MB of SDRAM
with 100MHz memory bus and ECC function
◆ Adopt flush mounted Slot 1 CPU processors
◆ Reserve three DiskOnChip sockets to form a
flash disk bank
◆ Support Real H/W Y2K compliant RTC
◆ Support ISA high driving capability and ATX
power control
Best Cost/Performance S-370 Type PICMG SBC
Intel® 440BX AGPset supports 66/100MHz FSB for
Socket 370 FC-PGA Celeron™ or Pentium® III
processors up to 800MHz
◆Support up to 1GB Max.registered SDRAM with
ECC function
◆One DOC socket supports up to 144MB flash
memory disk
◆PC/104 connector and high ISA-bus driving capability
◆Support C&T 69000 PCI VGA display with optional
panel solution
◆Support system overheat protection, Real H/W Y2K
compliant RTC and ATX power control
◆
Ultra Slim 19" 1U Height
Rack-mount Chassis
AIO drive set can hold notebook type CD-ROM,
FDD and HDD drives
Detachable backplane holder for easy installation
◆ One touch-free reset switch and ON/OFF switch
inside the front door for secure access
◆ Five 4cm ball-bearing cooling fans for
better ventilation
◆ One slot available, either ISA or PCI
◆ Adopt 150W slim type power supply
◆ Dimension: 483(W) x 431(D) x 44(H) mm
◆
◆
Super Compact 19" 2U
Height Rack-mount Chassis
1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays
Dual 8cm ball-bearing cooling fans for better
ventilation
◆ One touch-free reset switch and ON/OFF switch
inside the front panel for secure access
◆ 4 PCI slots for expansion
◆ 250W PS/2 redundant PSU installable
◆ Dimension: 482.6(W) x 430.6(D) x 88(H) mm
◆
◆
19" 4U Height Rack-mount
Chassis with 9 Drive Bays
19" 4U Industrial Rack-mount PC
Chassis for 12 Full-lengthed Cards
19" rack-mount chassis meets EIA RS-310C
industrial standard
◆ Rugged construction and design for harsh industrial
environment
◆ Nine 5.25" drive bays for RAID & CD-ROM
◆ Three 12cm ball-bearing cooling fans for better
ventilation
◆ Modularized PSU back panel
◆ Special design for 14 full-lengthed cards
◆
3x5.25"+1x3.5" FDD +1x3.5" HDD drive bays
Power switch protection offered inside the panel
cover to prevent accidental reset or system shut-down
◆ Adopt 330W AT type PSU & PICMG 14-slot backplane
◆ Two 12cm ball-bearing fans provide a better ventilation
to the system
◆ 12 full-length card can be installed
◆ Compatible with standard Dialogic voice/fax/modem card
◆ Dimension: 482.6(W) x510(D) x 177(H) mm
◆
◆
19" 4U Height Rack-mount CTI
Six 5.25" drive bays for RAID & CD-ROM
Three 12cm ball-bearing cooling fans for better ventilation
◆ Traditional rack-mount handles
◆ Modularized back panel for
20-slot Backplane
◆ Front access redundant
PSU installed
◆ PS/2 type redundant PSU
applicable
◆ Dimension: 482(W) x 638(D) x177(H) mm
◆
◆
19" 5U Height Rack-mount CTI
8x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD)
drive bays for RAID
◆ Detachable card cage for easy installation
◆ Three hot-swap cooling fans for easy replacement
◆ Modularized function panel for single, dual & quad
systems
◆ Adopt PICMG 20-slot backplane
◆ Equipped with 800W (600W+200W) redundant
ATX PSU
◆
19" 2U Height Rack-mount Keyboard
Drawer with 12.1" TFT Display
Smart and compact design for rack-mount application
2U (3.5") height to save space
◆ Equipped with 101-key keyboard and touch pad
◆ Support VGA connector for rack-mount PC
◆ Built-in 12.1" TFT display
◆ Dimension: 482(W) x 447(D) x 88.9(H) mm
◆
◆
Ultra Slim 19" 1U Height Rack-mount Chassis
Super Compact 19" 2U Height Chassis
Ultra™ AXe
19" rack-mount chassis meets EIA RS-310C industrial standard
Dual cooling fans generate positive air for better ventilation
◆ Easily-installed drive bracket with shock-resistant cushion and
well-conductive rubber
◆ Special design for SPARCengine™ Ultra™ AXe processor board
◆ Reserve 2 PCI slot for expansion
◆
◆
The Most Cost-effective 19" 4U Height Rackmount Chassis
Ultra™ AXi
◆ Dual 8cm ball-bearing cooling fans for better ventilation
◆ One touch-free reset switch inside the front panel
◆ Adopt Micro-ATX type 150W PSU
◆ Special design for SPARCengine™ Ultra™ AXi processor board
◆ Reserve 2 master PCI slots for expansion
◆
◆
19" 5U Height Rack-mount CTI Chassis with 6
Drive Bays
Ultra™ AXi
industrial standard
◆ Power On/Off switch with light indicator and a
reset switch inside the lockable door
◆ Dual cooling fans generate positive air for better
ventilation
◆ Easily-installed drive bracket with shock-resistant
cushion and well-conductive rubber
◆ Special design for SPARCengine™ Ultra™ AXi
processor board
◆ Dimension: 482(W) x 450.8(D) x 177(H) mm
19" 5U Height Rack-mount CTI Chassis with
10 Drive Bays
Ultra™ AXdp
Ultra™ AXmp
◆
drive bays for RAID
◆ Dual 12cm hot-swap ball-bearing cooling fans
for better ventilation
◆ One touch-free reset switch and one ON/OFF
switch protection cap for secure access
◆ PS/2 redundant PSU installable
◆ Special design for SPARCengine™ Ultra™ AXdp
processor board
◆
19" 4U Industrial Rackmount PC Chassis for ATX M/B
Adopt modularized function panel for easy installation of multiple
systems & redundant PSUs
◆ Power switch protection offered inside the panel cover to prevent
accidental reset
◆ Two adjustable positions card retainer allow fitting of multiple types of cards
◆ Two 12cm ball-bearing fans provide a better ventilation to the system
◆ Modularized back panel for easy change of different type ATX M/B
◆ Compatible with standard Dialogic voice / fax / modem card
◆
8x5.25"+1x3.5" (or 1xNB CD- ROM+1xNB FDD)
drive bays for RAID
◆ Hot-swap cooling fans for easy replacement
◆ 800W(600W+200W)redundant ATX PSU installable
◆ Special design for SPARCengine™ Ultra™ AXmp
processor board
◆
19" 5U Height Rackmount CTI Chassis with 6 Drive Bays for ATX M/B
4x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID
Dual 12cm hot-swap ball-bearing cooling fans for better ventilation
◆ Dual card retainer positions
◆ ATX M/B applicable, especially for Big-AT size M/B
◆ One touch-free reset switch and one ON/OFF switch protection cap for
secure access
◆
◆
19" 4U Rack-
Super Compact
Ultra Slim 19"
1U Height Rack-mount Chassis for ATX M/B
19" 2U Height Chassis for ATX M/B
mount Chassis with 9 Drive Bays for ATX M/B
industrial standard
◆ 2x5.25"+1x3.5" drive bays
ventilation
industrial standard
◆ 1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays
◆ Dual 8cm ball-bearing cooling fans for better
ventilation
◆ One touch-free reset switch and ON/OFF
switch inside the front panel for secure access
industrial standard
ventilation
◆ Best solution for rack-mount server
◆ Modularized back panel for Baby-AT & ATX M/B
◆
◆
◆
Ultra Slim 19" 1U Height Rack-mount Chassis
Super Compact 19" 2U Height Chassis
Ultra™ AXe
Dual cooling fans generate positive air for better ventilation
◆ Easily-installed drive bracket with shock-resistant cushion and
well-conductive rubber
◆ Special design for SPARCengine™ Ultra™ AXe processor board
◆ Reserve 2 PCI slot for expansion
◆
◆
The Most Cost-effective 19" 4U Height Rackmount Chassis
Ultra™ AXi
◆ Dual 8cm ball-bearing cooling fans for better ventilation
◆ One touch-free reset switch inside the front panel
◆ Special design for SPARCengine™ Ultra™ AXi processor board
◆ Reserve 2 master PCI slots for expansion
◆
◆
19" 5U Height Rack-mount CTI Chassis with 6
Drive Bays
Ultra™ AXi
industrial standard
◆ Power On/Off switch with light indicator and a
reset switch inside the lockable door
ventilation
◆ Special design for SPARCengine™ Ultra™ AXi
processor board
◆ Dimension: 482(W) x 450.8(D) x 177(H) mm
19" 5U Height Rack-mount CTI Chassis with
10 Drive Bays
Ultra™ AXdp
Ultra™ AXmp
◆
drive bays for RAID
◆ Dual 12cm hot-swap ball-bearing cooling fans
for better ventilation
◆ One touch-free reset switch and one ON/OFF
switch protection cap for secure access
◆ Special design for SPARCengine™ Ultra™ AXdp
processor board
◆
19" 4U Industrial Rackmount PC Chassis for ATX M/B
Adopt modularized function panel for easy installation of multiple
systems & redundant PSUs
◆ Power switch protection offered inside the panel cover to prevent
accidental reset
◆ Two adjustable positions card retainer allow fitting of multiple types of cards
◆ Two 12cm ball-bearing fans provide a better ventilation to the system
◆ Modularized back panel for easy change of different type ATX M/B
◆ Compatible with standard Dialogic voice / fax / modem card
◆
8x5.25"+1x3.5" (or 1xNB CD- ROM+1xNB FDD)
drive bays for RAID
◆ Hot-swap cooling fans for easy replacement
◆ 800W(600W+200W)redundant ATX PSU installable
◆ Special design for SPARCengine™ Ultra™ AXmp
processor board
◆
19" 5U Height Rackmount CTI Chassis with 6 Drive Bays for ATX M/B
4x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID
Dual 12cm hot-swap ball-bearing cooling fans for better ventilation
◆ Dual card retainer positions
◆ ATX M/B applicable, especially for Big-AT size M/B
◆ One touch-free reset switch and one ON/OFF switch protection cap for
secure access
◆
◆
19" 4U Rack-
Super Compact
Ultra Slim 19"
1U Height Rack-mount Chassis for ATX M/B
19" 2U Height Chassis for ATX M/B
mount Chassis with 9 Drive Bays for ATX M/B
industrial standard
◆ 2x5.25"+1x3.5" drive bays
ventilation
industrial standard
◆ 1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays
◆ Dual 8cm ball-bearing cooling fans for better
ventilation
◆ One touch-free reset switch and ON/OFF
switch inside the front panel for secure access
industrial standard
ventilation
◆ Best solution for rack-mount server
◆ Modularized back panel for Baby-AT & ATX M/B
◆
◆
◆
The World's First
The World's First Load
Quad. Load Sharing (N+1) Hot-Swap Power Supply
Sharing (N+1) PS/2 Type Hot-Swap Power Supply
Leading
Hot-swappable and highly reliable
Designed for fault-tolerant computers
◆ Suitable for CTI application
◆ Four load-sharing redundant modules provide total
800W power output (600W output when one fails)
◆ Supports ATX type power input connector
◆ Output: 60A@+5V, 1A@-5V, 24A@+12V,
3A@-12V, 1.5A@+5V SB, [email protected]
◆ One external IEC socket (for AC power input)
cable to fit into the special design of chassis
◆
State-of-the-art design of redundant P/S
True N+1 Load-sharing design
Each module has 150W power output
◆ Special front panel and handle design for ease of use
◆ Three load-sharing redundant modules provide total
450Wpower output (300W output when one fails)
◆ Supports ATX type power output connector
◆ Output: 20A@+5V, 12A@+12V, 1A@-5V, 1A@-12V,
1.5A@5V SB, [email protected]
◆
◆
◆
◆
The world's Most Compact PS/2 Type
- 48V DC/DC Redundant PSU
The 300W PS/2 Type 24V or -48V DC/DC ATX PSU
Two load-sharing redundant modules to provide
450W output
◆ Specially provide 1A@-12V for CTI application
◆ -48V DC/DC converter for telecom applications
◆ Swappable fan to get highly security for 100%
mission critical applications
◆ Output: 30A@+5V, 14A@+12V, 0.5A@-5V, 1A@-12V
◆ UL, CSA, TUV, CE approved
-48V DC input power converter is designed for
telecommunication applications
◆ 24V DC input power converter is designed for
vehicle applications
◆ Supports ATX type connector
◆ Specially provides 2A@ -12V(max.) for CTI
application
◆ Output: 25A@+5V, 10A@+12V, 8A@+3.3V,
1A@-5V, 1A@-12V
◆
◆
The 300W PS/2 Type Redundant Power Supply
400W+400W/300W+300W True Load-Sharing
N+1 Redundant PSU
PS/2 Type Hot-Swap Redundant PSU
◆
The world's most compact PS/2 type redundant
power supply
◆ Two load-sharing redundant modules provide total
600W output
◆ Specially provides 1.5A @ -12V for CTI application
◆ Each module has its own fan to expel the heat and
is more reliable
◆ Output: 30A@+5V, 14A@+12V, 15A@+3.3V,
0.5A@-5V, 1A@-12V
◆ AT & ATX power connector optional
◆
Two full 400W/300W load-sharing redundant
modules(50%+50%)
◆ Passed the 400W/300W load long time burn-in test
(over 72 hrs in 400W burn-in test)
◆ Silver-plated German DIN connector
◆ Meets ATX 2.01 standard
◆ Output: 4005H: 50A@+5V, 15A@+12V, 30A@+3.3V,
1.5A@-5V, 1.5A@-12V
3005H: 30A@+5V, 15A@+12V, 12A@+3.3V,
0.5A@-5V, 0.5A@-12V
The world's most compact PS/2 type redundant
power supply
◆ Two load-sharing redundant modules provide total
500W output
◆ Adopts swappable fans to get high security for
100% mission critical applications
◆ Output: 30A@+5V, 16A@+12V, 20A@+3.3V,
0.5A@-5V, 1.5A@-12V
◆ BPS-270RD-1 for front loading design
◆ AT & ATX power connector optional
Slim type of 150W AT/ATX Power Supply
The 450W PS/2 Type ATX PSU
The Most Compact 70W 24V or 12V DC/DC PSU
◆
40.5mm height, best solution
95~135V, 180~265 auto range input
◆ 1U height Chassis
◆ Output: 10A@+5V, 6A@+12V, 1A@-12V, 0.1A@-5V
◆
◆
◆
High efficient design for PS/2 type
UL, TUV, CSA and CE approved
◆ Output: 40A@+5V, [email protected], 17A@+12V,
1.5A@-12V, 0.5A@-5V
24V DC input power converter is designed for truck
applications
◆ 12V DC input power converter is designed for
mobile applications
◆ All models are slim and high efficient designed
◆ Output: 7A@+5V, 2.5A@+12V, 0.3A@-5V,
0.3A@-12V
◆ Dimension: 80.6(W) x127(D) x 50(H) mm
Leading
◆
◆
Advanced AIO Panel Board with Ethernet/VGA/Sound
Function, Based on the Celeron™ Processor
Compact Panel Workstation with 14.1" TFT
Display
Supports 4 SIO/2 PIO, 1 KB/1 Mouse and
2 USB ports
◆ Supports 10/100 Base-T RJ-45 Ethernet
◆ Supports IrDA interface
◆ Built-in 16-bit MIC/SPK
◆ Dimension: 188(W) x 135(H)mm
14" TFT LCD display with 1024x768 resolution
6-slot PCI/ISA Bus backplane supported
◆ Front panel NEMA4(IP52) /NEMA12(IP56)
complied
◆ Hardened aluminum alloy sealed front panel
◆ Powerful and easy-to-use platform
◆ No sparkle and low radiation
◆ Front panel LCD brightness control
◆ Optional front speakers for multimedia purpose
◆ Optional resistive touch screen
◆ Dimension: 387(W)x355(H)x184.4(D) mm
World's First Panel PC with 14.1" TFT Display,
Based on the Intel® Pentium® II Processor
Pentium ® Processor Based Panel PC
with 13.3" TFT Display
EZ-Work Panel PC with 12.1" TFT Display,
Based on the Pentium® Processor
◆
Supports Pentium® II(Celeron™)
processors up to 450MHz
◆ Adopts Intel® 440BX chipset
◆ Adopts 14" TFT panel display
◆ One DIMM socket supports up to 256MB
◆ Adopts C&T 69000 AGP VGA/ panel
display (2MB VRA inside)
◆ Supports 10/100 Base-T Ethernet
◆ Built-in 16-bit SPK/MIC
◆ One socket for DOC supports up to 144 MB
◆ Supports two parallel, four serial and two
USB ports
◆
Supports Intel® Pentium® processor
with MMX technology
◆ Supports two DIMM 16MB~128M SDRAM
◆ Adopts C&T 6555 Chipset
(2MB VRAM inside)
◆ Adopts 13.3" TFT panel display
◆ Built-in CD-ROM, FDD and HDD
◆ Built-in PCMCIA Type 3x1 Slot
◆ One PCI/ISA expansion slot
◆ Supports 10/100 Base-T Ethernet
◆ Built-in 16-bit SPK/MIC
◆ One socket for DOC supports up to 144MB
◆ Supports 2 parallel, 4 serial and 2 USB ports
◆ Dimension: 370(W)x280(H)x102(D) mm
Reserves space for PPB withprocessor
ranging from Pentium® to Pentium II
◆ Supports 12.1"TFT panel display
◆ Supports 10/100 base-T Ethernet
◆ supports 2 parallel, 4 serial and 2 USB ports
◆ One socket for DOC supports up to 144MB
◆ EZ-Work stand for multi-purpose applications
◆ Membrane LCD brightness control(PPC-5000)
◆ Front speakers for multimedia purpose
(PPC-5000S)
14" 1024x768 Color TFT Panel Display Kit
12.1" 800x600 Color TFT Panel Display Kit
6.4" 640x480 Color TFT Panel Display Kit
14" TFT Panel Display
XGA, 1024x76 8, 262K colors
◆ 0.278mm x 0.278mm pixel dimension
◆ Reserves space for PPB ( Panel Board),
with processors ranging from Pentium®
to Pentium II
◆ Built-in Ethernet and 16-bit sound
◆ Built-in 65W universal power supply
◆ PCI/IDE hard disk interface
12.1" TFT Panel Display
SVGA, 800x600, 262K colors
◆ Reserves space for PPB, with processors
ranging from Pentium® to Pentium II
◆ Built-in Ethernet
◆ On-board 4 SIO/2 PIO, 1 KB/1 Mouse
and 2 USB ports
◆ Built-in 65W universal input power supply
◆ PCI/IDE hard disk interface
Supports Pentium ® II EMC processors up
to 4XX/100MHz
◆ Built-in Intel 440BX chipset
◆ Adopts C&T 69000 AGP VGA/panel
display (2MB VRAM inside)
◆ One DIMM socket supports up to 256MB
◆ One socket for DiskOnChip supports up
to 144MB
◆
◆
◆
◆
◆
◆
◆
◆
◆
6.4" TFT Panel Display
VGA, 640x480, 262K colors
Reserves space for PPB (Panel Board)
with processors ranging from Pentium®
to Pentium II
◆ Built-in Ethernet
◆ Four SIO/two PIO, one KB/one Mouse
and two USB ports
◆ Built-in 65W universal power supply
◆ Dimension:246(W)x160(H)x130.4(D) mm
◆
◆
◆
Portwell, Inc.
American Portwell Technology, Inc.
3F, No.88, Sec.1, Nei-Hu Rd.,
Taipei, Taiwan, R.O.C.
Tel: +886-2-27992020
Fax: +886-2-27991010
E-mail:[email protected]
41380 Christy St. Fremont, CA 94538
Tel: (510)979-0640
Fax: (510)979-0603
E-mail:[email protected]
http://www.portwell.com.tw

Most Advanced PICMG SBC Based on Dual Intel® P

Transcription

Similar documents

M2-ATX Specs - Mini

the extra mile. - Jetco Delivery

Ver. 21L - Portwell

Zenith Transoceanic H500

Converting a Slot.it Ferrari F40 to run on a SCX

Salvador Calvo Redondo Age: 50 Nationality: Spain

BusCon 2012 EXHIBITORS

Philco 16B restoration

article here

puzzle - Dallas Voice

Product-Dispensador de Agua 2 - Oasis

Ultra Vitality Brochure

ATX Document Manager - CCH Small Firm Services