STD4159 - IMDS Public Pages

Transcription

STD4159 - IMDS Public Pages
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
1(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Michaela Bundschuh
Distribution: Scania, Supplier
Chemical substances with limited
use - Scania Grey list
Kemiska ämnen med begränsad
användning - Scanias grå lista
Contents
Page
Orientation .....................................................1
Changes from previous issue.........................2
1 Scope and field of application .............2
2 Definition .............................................2
3 Criteria.................................................2
4 Requirements ......................................4
List of substances (Swedish version) ..5
4 4 List of substances (English version) .. 21
5 Appurtenant documents .................... 37
Innehåll
Sida
Orientering..................................................... 1
Ändringar från föregående utgåva ................. 2
1 Omfattning och tillämpning ................. 2
2 Definition ............................................. 2
3 Kriterier ............................................... 2
4 Krav .................................................... 4
Ämnesförteckning (Svensk version) ... 5
4 4 Ämnesförteckning (Engelsk version) 21
5 Tillhörande dokument ....................... 37
Orientation
Orientering
There are no international or national
equivalents to this standard. This standard
shall be regarded as a complement to
international and national requirements by
legislation and agreements.
Internationell eller nationell motsvarighet till
denna standard saknas. Denna standard
kompletterar internationella och nationella
krav och överenskommelser.
Please note that this is a Scania Standard.
Legal requirements concerning the use of
hazardous chemical substances in different
countries not covered by this standard must
be fulfilled.
STD10073-4
Associated standards are:
Beakta att detta är en Scania Standard.
Lagkrav om användning av farliga kemiska
ämnen i olika länder som inte omfattas av
denna standard måste uppfyllas.
Angränsande standarder är:
-
Scania STD4384en Criteria for
limitation and reporting of chemical
substances, (for Scania internal
distribution only)
-
Scania STD4384en Criteria for
limitation and reporting of chemical
substances (endast för Scania-intern
spridning)
-
Scania STD4158 Chemical substances
which must not be used
( Scania Black list)
-
Scania STD4158 Kemiska ämnen som
inte får användas (Scanias svarta lista)
-
-
STD4400en Prohibited and restricted
substances in Scania’s products.
STD4400en Prohibited and restricted
substances in Scania’s products.
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
2(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Michaela Bundschuh
Changes from previous issue
Ändringar från föregående utgåva
Substances on the REACH candidate lists
have been introduced into the standard
Nya ämnen listade i REACH Kandidatförteckning har adderats till standarden.
The changes are shaded.
Ändringarna är skuggmarkerade.
1
1
Scope and field of application
Omfattning och tillämpning
According to a decision by Scania, restrictions
have been introduced with respect to the use
of certain chemical substances. This standard
lists restricted chemical substances that
should not be present in chemical products
used in Scania’s product development,
production processes or the sales and service
network or Scania´s processes concerning
facilities and maintenance.
Enligt beslut inom Scania har begränsningar
införts för användandet av vissa kemiska
ämnen. Denna standard innehåller kemiska
ämnen som inte bör användas i kemiska
produkter i Scanias produktutveckling,
produktion, försäljning och servicenätverk
samt i Scanias processer som rör
anläggningar och underhåll.
2
2
Definition
Definition
Chemical product is a chemical substance or
mixture, such as hydrochloric acid, glue, paint
and coolant. Note that a chemical substance
/mixture may also be included in an part such
as explosive in an airbag.
Kemisk produkt är ett kemiskt ämne eller en
blandning exempelvis saltsyra, lim, färg och
kylarvätska. Observera att ett kemiskt ämne
/blandning kan även ingå i en artikel
exempelvis explosivt ämne i en krockkudde.
3
3
Criteria
Restricted substances that fulfil one of the
following requirements should not be used.
Kriterier
Ämnen som uppfyller något av följande krav i
denna standard bör ej användas.
STD10073-4
The restriction refers to all use of the chemical Begränsningen avser all användning av
substances >0,1 % (weight). This limit applies kemiska ämnen i halter > 0,1 % (vikt). Denna
if not stated otherwise in the standard.
haltgräns gäller då inget annat anges i
standarden.
- The use of the substance will be forbidden
by law at a known date.
- Användningen av ämnet kommer att bli
förbjudet enligt lag vid en känd tidpunkt.
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
3(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
- The substance is classified as a
Substance of Very High Concern (SVHC)
according to REACH1) Article 57. SVHC
includes substances which are:
- Carcinogenic, Mutagenic or Toxic for
Reproduction (CMR) classified in
category 1 and 22)
- Persistent, Bio-accumulative and Toxic
(PBT)
- Very Persistent and very Bioaccumulative (vPvB)
- Identified as causing probable serious
effects to human health or the
environment.
- The substance is in other ways/by other
means identified as high-risk substance
with regard to effects to human health
and/or the environment.
All substances with the above classification
shall be handled as restricted regardless of
whether or not the substance is explicitly
listed in the standard.
Michaela Bundschuh
- Ämnet är klassat som särskilt farligt ämne
(SVHC) enligt REACH1) Artikel 57. SVHC
omfattar ämnen som är:
- Cancerogena, Mutagena eller
Reproduktionstoxiska ämnen (CMR)
klassificerade i kategori 1 och 22)
- Persistent, Bio- ackumulerande och
Toxisk (PBT)
- Mycket Persistent och mycket Bioackumulerande (vPvB)
- Identifierad att orsaka sannolika
allvarliga effekter på människors hälsa
eller miljön.
- Ämnet har på något vis identifierats som
högriskämne med avseende på effekter på
människors hälsa och/eller miljön.
Alla ämnen med ovanstående klassificering
skall undvikas oavsett om ämnet uttryckligen
anges i standarden eller inte.
Outlined below are examples of risk phrases
which means that a substance is covered by
this standard.
Nedan anges exempel på riskfraser som
innebär att ett ämne omfattas av denna
standard.
CMR substances category 1 and 22)
CMR-ämnen enligt kategori 1 och 22)
Property
Risk
phrase EU
Cancerogenic
(C)
R45, R49
Mutagenic (M)
Reproduction Toxic
(R)
Risk phrase
CLP
Egenskaper
Riskfraser
enligt KIFS
Riskfraser
enligt CLP
H350, H350i
Cancerframkallande
(C)
R45, R49
H350, H350i
R46
H340
Mutagen (M)
R46
H340
R60, R61
H360, H360F,
H360H
Reproduktionstoxiskt
(R)
R60, R61
H360, H360F,
H360H
1)
REACH (Registration, Evaluation, Authorisation and Restriction of Chemical substances) REACH is a new
European Community Regulation on chemicals and their safe use (EC 1907/2006).
STD10073-4
2)
Equivalent to category 1A and 1B according to Regulation (EC) No 1272/2008 concerning the
classification, labelling and packaging of chemical substances and mixtures (CLP).
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
4(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
4
STD10073-4
Date
Susanne Brodin Håkansson
Requirements
4
Michaela Bundschuh
Krav
Chemical products containing chemical
substances in this standard should not be
used. An active substitution work shall be
done and the substance shall be kept under
surveillance to find less hazardous
alternatives to be introduced as soon as
technically and economically possible.
Kemiska produkter som innehåller kemiska
ämnen som omfattas av denna standard bör
ej användas. Ett aktivt substitutionsarbete
skall bedrivas och ämnet ska hållas under
bevakning för att hitta mindre farliga alternativ
så snart det är tekniskt och ekonomiskt
möjligt.
All substances listed in this Standard must be
communicated to Scania according to the
process described on the Supplier portal
https://supplier.scania.com or within Scania
according to local methods.
Alla ämnen upptagna i denna standard ska
deklareras och informeras till Scania enligt
rutin beskriven på leverantörsportalen
https://supplier.scania.com eller inom Scania
enligt lokala rutiner.
The standard will be revised at least annually
by the Forum for Chemical Support.
Standarden revideras minst en gång per år av
Kemikalieforum.
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
5(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
4
Susanne Brodin Håkansson
List of substances (Swedish version) 4
For English version see page 20.
Michaela Bundschuh
Ämnesförteckning (Svensk version)
För engelsk version se sidan 20.
Grupp
Ämnesnamn
Biocider
Klorkresol (meta-)
CAS-nr1)
(EG-nr)
59-50-7
Klorkresol (orto-)
1570-64-5
Klormetylisotiazolinon
Metylisotiazolinon
Kathon CG
Bortrioxid 3)
26172-55-4
2682-20-4
55965-84-9
1303-86-2
(215-125-8)
Tiram (TMTD,
Tetrametyltiuramdisulfid)
Dinoseb
2-(1-Metyl-n-propyl)-4,6dinitrofenol 3)
Eldfast keramisk fiber
Aluminiumsilikat3)
137-26-8
A, E
88-85-7
(201-861-7)
R
-
C
Fibrer
Aluminiumsilikat keramisk
fiber (RCF) 3)
Zirconium aluminiumsilikat
keramisk fiber (Zr-RCF) 3)
Eldfast keramisk fiber
Zirkoniumalumniumsilikat3)
TD10073-4
Date
Risk2)
E, A
E
(sannolikt)
A
R
Tillämpning
Exempel på typ eller
användningsområde
För biocider upptagen i denna Smörjmedel
standard omfattas varje
Lacker
medveten tillsats.
Skärvätskor
Haltgräns 0 %
Införandedatum
1998-02-26
1998-02-26
Vattenlösningar
Skärvätskor
Färger
Färg, lack, tryckfärg,
detergent flamskyddsmedel,
katalysator,
Färg
Rengöringsmedel
Tillverkning av polyakrylamid
Ämnet täcks av indexnummer Hög temperatur isolering
650-017-00-8 i bilaga VI, del
samt inom brandskydd
3, tabell 3.2 i EG-förordningen
nr 1272/2008.
1998-02-26
1998-02-26
2012-06-18
1998-02-26
2012-12-19
2010-02-23
2012-01-03
2012-0103
-
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
2010-02-23
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
6(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
Susanne Brodin Håkansson
UTMS
Grupp
Ämnesnamn
Flamskyddsmedel
Bromerade
CAS-nr1)
(EG-nr)
Flera
Hexabromcyklododekan3)
(HBCDD) och alla
huvudsaklig identifierade
diastereo-isomerer:
25637-99-4
(247-148-4)
3194-55-6
(221-695-9)
α – HBCDD 3)
β – HBCDD 3)
γ – HBCDD 3)
134237-51-7
134237-50-6
134237-52-8
Trifenylfosfat
HCFC 141 b
HCFC 142 b
HCFC 22
115-86-6
1717-00-6
75-68-3
75-45-6
E, A
O
Toluendiisocyanat (2,4-)
584-84-9
Toluendiisocyanat (2,6-)
1,3,5-Tris(oxiranylmetyl)1,3,5-triazin2,4,6(1H,3H,5H)-trion
TGIC
Triglycidylisocyanurat3)
1,3,5-Tris[(2R)oxiranylmetyl]-1,3,5-triazin2,4,6(1H,3H,5H)-trion
β-TGIC
β-Triglycidyliso-cyanurat 3)
91-08-7
2451-62-9
(219-514-3)
A, (astma),
C
A,C
T ,M
Härdare i harts. Ytbeläggning
och laminering. Tryckfärg,
screentryck
HCFC-föreningar
Härdare
TD10073-4
Date
59653-74-6
(423-400-0)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Risk2)
Tillämpning
E
Inte PBB och PBDE då de
omfattas av STD4158
Exempel på typ eller
användningsområde
Textilier
Plast
Införandedatum
1998-02-26
2008-11-18
2008-11-18
2008-11-18
M
HCFC använt som jäsmedel
för skumplast eller som
lösningsmedel omfattas av
STD4158. HCFC använt som
köldmedel omfattas av
STD4159.
Plastvaror (mjukningsmedel)
Köldmedium
Mjuka PUR-skum
Lim
Pulverfärger
2008-11-18
2008-11-18
1998-02-26
1998-02-26
1998-02-26
1998-02-26
1998-02-26
1998-02-26
2002-08-15
2012-06-18
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
7(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
Susanne Brodin Håkansson
UTMS
Grupp
Ämnesnamn
Härdare forts
Antracenolja3)
Komplexa
blandningar
Antracenolja,
antracenpasta, lätt
destillationsfraktion3)
CAS-nr1)
(EG-nr)
90640-80-5
(292-602-7)
91995-17-4
(295-278-5)
Michaela Bundschuh
Risk2)
Tillämpning
C, E
C
T
M
E
Exempel på typ eller
Införandedatum
användningsområde
Tillverkning av Antracen och 2010-02-23
”Carbon Black” (kimrök)
2010-02-23
Antracenolja,
antracenpasta,
antracenfraktion3)
Antracenolja, med lågt
innehåll av antracen3)
91995-15-2
(295-275-9)
2010-02-23
90640-82-7
(292-604-8)
2010-02-23
Antracenolja,
antracenpasta3)
90640-81-6
(292-603-2)
8050-09-7
8052-10-6
73138-82-6
2010-02-23
Kolofonium
Kreosot
TD10073-4
Date
A
Tillåten halt max 1%
Lim
Lack
Skärvätskor
2002-08-15
2002-08-15
2002-08-15
m.fl. 1998-02-26
8001-58-9
m.fl.
C, E
Beck, koltjäre-,
högtemperatursDestillationsprodukt från
stenkolstjära3)
Stenkolstjära
65996-93-2
(266-028-2)
C, E
Stålkonstruktioner
Gummi
Elektroder
2010-02-23
8007-45-2
65996-91-0
m.fl.
C
Utfyllnadsmedel
2002-08-15
2002-08-15
1,2,3-Triklorpropan3)
96-18-4
(202-486-1)
C, R
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Destillationsfraktion
1998-02-26
m.fl.1998-02-26
2011-07-05
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
8(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Michaela Bundschuh
Dikloretan (1,2-)
CAS-nr1)
(EG-nr)
107-06-2
C
Exempel på typ eller Införandedatum
användningsområde
Bränsletillsats
1998-02-26
Hexan (normal)
110-54-3
N
Lösningsmedel
Kloroform
67-66-3
C, R
1998-02-26
107-06-2
(203-458-1)
111-96-6
(203-924-4))
127-19-5
(204-826-4)
138-86-3
5989-27-5
5989-54-8
6876-12-6
7705-14-8
C
2012-01-03
R
2012-01-03
R
2012-01-03
Grupp
Ämnesnamn
Lösningsmedel
1,2-Dikloretan
3)
2,2-Dimetyldietyleter3)
N,N dimetylacetamid
(DMAC) 3)
Limonen
2-Metoxy-1-propanol
Trikloretylen3)
1,2,-Bis(2-metoxietoxi)etan
(TEGDME) 3)
1,2- dimetoxietan (EGDME)
3)
N-Metyl-2-pyrrolidon (NMP)
3)
1-Brompropan3)
1,2-Dietoxietan3)
TD10073-4
Date
1589-47-5
79-01-6
(201-167-4)
112-49-2
(203-977-3)
110-71-4
(203-794-9)
872-50-4
(212-828-1)
106-94-5
(203-445-0)
629-14-1
(211-076-1)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Risk2) Tillämpning
A, E
Tillåten halt max 1%
R
C
Tillåten halt max 0.5%
R
Processhjälpmedel vid tillverkning
och formulering av industrikemikalier
Processhjälpmedel vid tillverkning
och formulering av industrikemikalier
R
Lösningsmedel
Lösningsmedel
1998-02-26
2002-08-15
2002-08-15
2005-12-19
2005-12-19
2005-12-19
m.fl 1998-02-26
2002-08-15
1998-02-26
2012-06-18
2012-06-18
R
Lösningsmedel
2011-07-05
R
Lösningsmedel
2012-12-19
R
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
9(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Grupp
Susanne Brodin Håkansson
Ämnesgrupp
Lösningsmedel forts N,N-dimetylformamid
Metaller
3)
Furan, Oxacyklopentadien3)
Arsenik + föreningar
Diarseniktrioxid3)
Diarsenikpentoxid3)
Trietylarsenat3)
Blyvätearsenat3)
Arseniksyra3)
Trikalciumdiarsenat3)
Triblydiarsenat3)
Blyazid3)
Bly som legeringsämne
Bly-2,4,6-trinitro-1,3fenylendioxid3)
Bly(2+)pikrat3)
Bly och blyföreningar
TD10073-4
Date
CAS-nr1)
(EG-nr)
68-12-2
(200-679-5)
110-00-9
(203-727-3)
Flera
1327-53-3
(215-481-4)
1303-28-2
(215-116-9)
15606-95-8
(427-700-2)
7784-40-9
(232-064-2)
7778-39-4
(231-901-9)
7778-44-1
(231-904-5)
3687-31-8
(222-979-5)
13424-46-9
(236-542-1)
Flera
15245-44-0
(239-290-0)
6477-64-1
(229-335-2)
Flera
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Risk2)
Tillämpning
R
C
N, C, E
Exempel på typ eller Införandedatum
användningsområde
Lösningsmedel,
2012-12-19
laboratoriekemikalier
Lösningsmedel
2012-12-19
Träskydd
Torkmedel
1998-02-26
2008-11-18
2008-11-18
2008-11-18
2008-11-18
C
2012-01-03
C
2012-01-03
C, R
2012-01-03
R
E, N
R
Legeringar
R
E, N
2002-08-15
2012-01-03
2012-01-03
All elektronik och elektronisk
utrustning som innehåller mer än
0.1 g bly per komplett artikel ska
märkas enligt Scania STD3871.
1998-02-26
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
10(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Metaller fortsättning
Kaliumbis
(zinkkromat)hydroxid3)
Krom (VI) föreningar
Blymetansulfonat3)
Krom (III) kromat3)
Kromtrioxid3)
Syror genererade från
krom-trioxid och dess
oligomerer3).
Grupper innehållande:
Kromsyra
CAS-nr1)
(EG-nr)
11103-86-9
(234-329-8)
Flera
17570-76-2
(401-750-5)
24613-89-6
(246-356-2)
1333-82-0
(215-607-8)
Flera
7738-94-5
(231-801-5)
Dikromsyra
13530-68-2
(236-881-5)
Oligomerer av kromsyra och dikromsyra
Natriumdikromat3)
7789-12-0
10588-01-9
(234-190-3)
Krom(III)kromat3)
24613-89-6
(246-356-2)
Strontiumkromat3)
7789-06-2
(232-142-6)
TD10073-4
Nina Fröidh
Area specialist (department acronym, name)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Risk2)
Tillämpning
Exempel på typ eller Införandedatum
användningsområde
Ytbeläggning
2012-01-03
För ytbehandling av gängade
fästelement gäller gränsvärde för
urlakning 0,3 µg/cm2 enligt
SS2392.
För övriga artiklar och processer
gäller kravet på 0,1 % viktprocent.
Ytbeläggning vid tillverkning av
elektroniska komponenter.
Ytbehandling
Pigment
C
A, C, E
R
1998-02-26
2012-06-18
C
Ytbehandling
2012-01-03
C, M
Ytbehandling/
ytbeläggning
Ytbehandling/
ytbeläggning
2011-01-05
C
2011-01-05
2011-01-05
2011-01-05
2011-01-05
C, R
C,M,R
C
Råmaterial för
2008-11-18
pigment Ytbehandling
Används i blandningar
Ytbehandling
Pigment
2011-07-05
m.fl. 1998-02-26
1998-02-26
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
11(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Metaller fortsättning
Zinkkromat
Koboltdiklorid3)
Blykromatsulfatmolybdat3)
(C.I. röd 104)
Blysulfokromat3)
(C.I. gul 34)
Zinkkromat (VI) hydroxid3)
Natriumkromat3)
Ammoniumdikromat3)
Kadmium 3)
Kadmiumoxid 3)
Kaliumdikromat3)
Kaliumkromat3)
Zink kaliumkromat
hydroxid3)
TD10073-4
Date
Michaela Bundschuh
CAS-nr1)
(EG-nr)
13530-65-9
Risk2)
7646-79-9
(231-589-4)
12656-85-8
(235-759-9 )
1344-37-2
(215-693-7)
C, R
Katalysator
2008-11-18
C,R
Färg (Pigment)
2010-02-23
Tillämpning
Exempel på typ eller Införandedatum
användningsområde
1998-02-26
2010-02-23
49663-84-5
(256-418-0)
C
Ytbeläggning
2012-01-03
7775-11-3
(231-889-5)
7789-09-5
(232-143-1)
7444-43
(231-152-8)
C, R
T, M
Ytbehandling
2008-11-18
1306-19-0
(215-146-2)
7778-50-9
(231-906-6)
7789-00-6
(232-140-5)
11103-86-9
(234-329-8)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
2010-10-20
C
Batterier, ytbehandlade metallvaror
av järn, stål, mässing, och
aluminium.
I lödningar.
C
Tillverkning av andra kadmiumföreningar
Batterier,
ytbehandlade
metallvaror av järn,
stål, mässing, och
aluminium.
Laboratoriekemikalie
2013-06-20
2013-0-6-20
2010-10-20
C, T, M
2010-10-20
CMR
2011-07-05
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
12(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Metaller fortsättning
Nickel
Kobolt(II)sulfat3)
Kobolt(II)nitrat3)
Kobolt(II)karbonat3)
Kobolt(II)acetat3)
Blyacetat, basisk3)
Bly antimon, gul pyroklor 3)
Bly-bis(tetrafluoroborat) 3)
Blycyanamidat 3)
Blydinitrat 3)
Blykarbonat, basiskt 3)
Blymonoxid 3)
TD10073-4
Date
CAS-nr1)
(EG-nr)
7440-02-0
Michaela Bundschuh
Risk2)
Tillämpning
A
Gäller ytbeläggningar på fästelement och
övriga artiklar som överskrider gränsvärdet
för urlakning av nickel (0,5 µg
nickel/cm2/vecka). Testmetoder för
bestämning av urlakning
EN 1811+A1:2008 och EN 12472:2005
10124-43-3
(233-334-2)
10141-05-6
(233-402-1)
C, R
513-79-1
(208-169-4)
71-48-7
(200-755-8)
51404-69-4
(257-175-3)
8012-00-8
(232-328-1)
13814-96-5
(237-486-0)
C, R
20837-86-9
244-073-9)
10099-74-8
(233-245-9)
1319-46-6
(215-290-6)
1317-36-8
(215-267-0)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Exempel på typ eller Införandedatum
användningsområde
Ytbehandling
2002-08-15
Råmaterial pigment,
ytbehandling, batterier
Råmaterial
katalysator,
ytbehandling, batterier
Råmaterial
katalysator
Katalysator,
ytbehandling, pigment
Laboratoriekemikalie,
beläggning och färger
Färg, pigment, bläck
toner
Ytbehandling,
galvanisering,
laboratoriekemikalie
C, R
C, R
R
R
R
R
2011-01-05
2011-01-05
2011-01-05
2011-01-05
2012-12-19
2012-12-19
2012-12-19
2012-12-19
R
Stabilisatorer till PVC
C
Pigment i färg
R
Stabilisatorer, pigment, råvara för glas
och keramik tillverkning
Plastvaror
2012-12-19
2012-12-19
Blybatterier, glas och
keramik
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
13(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Metaller fortsättning
CAS-nr1)
(EG-nr)
Blymonoxid 3)
1317-36-8
(215-267-0)
Blyoxidsulfat 3)
12036-76-9
(234-853-7)
Blyoxidsulfat, Tetrablytrioxid- 12202-17-4
sulfat 3)
(235-380-9)
Blysilikat 3)
11120-22-2
(234-363-3)
Blysulfit, dibasisk 3)
62229-08-7
(263-467-1)
Blytetraoxid, blymönja 3)
1314-41-6
(215-235-6)
Ämnesgrupp
Blytitantrioxid
3)
Blytitan- zirkoniumoxid 3)
Dibutyltenndiklorid 3)
Fettsyror, C16-18, blysalter 3)
Kiselsyra, bariumsalt (1:2),
bly-dopat 3)
Pentablytetraoxidsulfat
Blysulfat, tetrabasiskt 3)
Tetraetylbly 3)
Triblydioxidfosfonat 3)
TD10073-4
Date
Michaela Bundschuh
Risk2)
Tillämpning
R
R
Stabilisatorer, pigment, råvara för glas
och keramik tillverkning
Stabilisatorer till PVC
Exempel på typ eller Införandedatum
användningsområde
Blybatterier, glas och 2012-12-19
keramik
Plastvaror
2012-12-19
R
Färg och lack, stabilisatorer till PVC
Plastvaror, blybatteri
2012-12-19
2012-12-19
R
Stabilisatorer till PVC
Glas och
keramikvaror
Plastvaror
R
Pigment, stabilisatorer
2012-12-19
R
R
Gummitillverkning
Blybatterier, glas och
keramik, gummi och
plastvaror
Halvledare, datorer,
elektriska och optiska
produkter
Elektroniska
produkter
Gummivaror
R
Stabilisatorer till PVC
Plastvaror
2012-12-19
R
Färg
2012-12-19
R
Stabilisatorer till PVC
Beläggning i
glödlampor
Plastvaror,
blybatterier
R
Drivmedel
R
Stabilisatorer
12060-00-3
(235-038-9)
R
12626-81-2
(235-727-4)
683-18-1
(211-670-0)
91031-62-8
(292-966-7)
68784-75-8
(272-271-5)
12065-90-6
(235-067-7)
78-00-2
(201-075-4)
12141-20-7
(235-252-2)
R
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
2012-12-19
2012-12-19
2012-12-19
2012-12-19
2012-12-19
2012-12-19
Plastvaror
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
14(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Metaller fortsättning
Triblydioxobis- (stearat) 3)
Mjukgörare
Butylbensylftalat3)
Dibutylftalat3)
Dimetylftalat
Di(2-etylhexyl)ftalat DEHP3)
1,2-Bensendikarboxylsyra,
di(grenade C6-C8)
alkylftalater3)
Hexahydrometylftalsyraanhydrid 3)
Hexahydro-4-metylftalsyraanhydrid 3)
Hexahydro-1-metylftalsyraanhydrid 3)
Hexahydroftal- syraanhydrid
3)
Hexahydro-3-metylftalsyraanhydrid 3)
De individuella isomererna
[2], [3] och [4] (inklusive
deras cis- och trans-,
stereoisomera former) och
alla möjliga kombinationer av
isomererna [1]
TD10073-4
Date
CAS-nr1)
(EG-nr)
12578-12-0
(235-702-8)
85-68-7
(201-622-7)
84-74-2
(201-557-4)
131-11-3
117-81-7
(204-211-0)
71888-89-6
(276-158-1)
25550-51-0
(247-094-1)
19438-60-9
(243-072-0)
48122-14-1
(256-356-4)
85-42-7
(201-604-9)
57110-29-9
(260-566-1)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Risk2)
Tillämpning
R
Stabilisatorer till PVC
E, R
Exempel på typ eller Införandedatum
användningsområde
Plastvaror
2012-12-19
Plast
Gummi
Lim
Lack
1998-02-26
1998-02-26
T
R
Härdare, Lack
PVC
Färg
1998-02-26
2004-02-24
2011-07-05
2012-12-19
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
15(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
CAS-nr1)
(EG-nr)
117-84-0
Risk2) Tillämpning
Di(metoxyetyl)ftalat DEMP
Diisobutylftalat3)
117-82-8
84-69-5
(201-553-2)
R
R
Dipentylftalat (DPP) 3)
131-18-0
(205-017-9)
115-96-8
(204-118-5)
68515-42-4
(271-084-6)
R
Grupp
Ämnesgrupp
Mjukgörare
forts
Dioktylftalat DOP
Trikloretylfosfat (-2)3)
Syror
Tensider
Michaela Bundschuh
1,2-Bensendikarboxylsyra,
di(grenade och raka C7C11) alkylftalater3)
Fluorvätesyra (HF)
Metoxiättiksyra 3)
DHTDMAC
DSDMAC
DTDMAC
4-(1,1,3,3-Tetrametylbutyl)
fenol, etoxilerad, tertOktylfenoletoxilat
(täcker väldefinie-rade
ämnen och UVCB-ämnen,
polymerer och homologer)
7664-39-3
625-45-6
(210-894-6)
61789-80-8
107-64-2
68783-78-8
E
Mjukgörare i PVC-plast
R
R
T
R
Exempel på typ eller
användningsområde
Gummi
Plast
Lim/Fogmassa
Färg
Varor av PVC-plast
Färger, fogmassa, vax, polish
2002-08-15
2002-08-15
2010-02-23
2013-06-20
Additivt flamskydds
medel ex plast
PVC
2010-02-23
Betmedel, Etsning
1998-02-26
2012-12-19
Mjukgöringsmedel
Sköljmedel
Bilvårdsprodukter
Ytbelagda metallvaror
1998-02-26
1998-02-26
1998-02-26
2012-12-19
Vattenbehandling
Plast
Smörjmedel
Antioxidant
Flamskyddsmedel
2010-05-07
Kalkborttagningsmedel
E
Införandedatum
2011-07-05
3)
Tillsatsämnen
Akrylamid3)
TD10073-4
Difenylamin
Trifenylfosfat
79-06-1
(201-173-7)
122-39-4
115-86-6
C, A,
TM
E, T
E
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
1998-02-26
2002-08-15
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
16(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Tillsatsämnen
forts
Natriumnitrit
4-(1,1,3,3tetrametylbutyl)fenol, (4tert-Oktylfenol) 3)
Formaldehyde, polymer
med bensenamin3)
Fenolftlaein3)
.
CAS-nr1)
(EG-nr)
7632-00-0
Michaela Bundschuh
Risk2) Tillämpning
(C), T
Tillåten halt max 1%. Nitrit kan
bilda cancerogena nitrosaminer
vid kontakt med sekundära
aminer
Exempel på typ eller
användningsområde
Rostskydd
140-66-9
(205-426-2)
25214-70-4
(500-036-1)
77-09-8
(201-004-7)
2-Metoxibensenamin3)
90-04-0
(201-963-1)
2,2 –diklor-4,4´-metylendianilin 101-14-4
(MOCA)3)
(202-918-9)
Sekundära aminer
111-42-2
110-91-8
101-83-7
110-85-0
Perfluoroktansulfonat
Flera
(PFOS)
Antracen3)
120-12-7
(204-371-1)
4-Aminoazobenzen 3)
60-09-3
(200-453-6)
[1,2-Benzen-dikarboxylato(2-)]dioxotribly 3)
3-Etyl-2-metyl-2-(3metylbutyl)-1,3-oxazolidin 3)
TD10073-4
Date
69011-06-9
(273-688-5)
143860-04-2
(421-150-7)
Införandedatum
1998-02-26
2012-01-03
C
2012-01-03
C
2012-01-03
C
2012-01-02
C
2012-01-03
(C)
Rostskydd
2007-10-17
E
Impregneringsmedel
2007-10-17
E
Fyllmedel
Carbon Black
Textil
2008-11-18
Gummivaror, plastvaror
2012-12-19
C
R
R
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Sekundära aminer kan bilda
cancerogena nitrosaminer vid
kontakt med nitriter.
Råmaterial, används som
mellanprodukt för framställning
av pigment
Stabilisatorer till PVC
2012-12-19
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
17(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Tillsatsämnen
forts
Propylenoxid
Metyloxiran 3)
Ammonium pentadekafluoroktanat (APFO) 3)
Intermediärer
CAS-nr1)
(EG-nr)
75-56-9
(200-879-2)
3825-26-1
(223-320-4)
Införandedatum
Till ytaktiva ämnen
2012-12-19
R
Fotografisk industri, tillverkning
av halvledare.
Impregneringsmedel, golvvax,
färg.
Processkemikalie vid
tillverkning av
polytetrafluoroetylen (PTFE)
och polyvinylidenfluorid
(PVDF).
Fotografisk industri, tillverkning
av halvledare.
Impregneringsmedel, golvvax,
färg, skidvalla.
Processkemikalie vid
tillverkning av polytetrafluoroetylen (PTFE) och
polyvinylidenfluorid (PVDF).
Färgämnen, pigment
2013-06-20
4-Amino-2',3dimetylazobenzen 3)
Dietylsulfat 3)
C
4,4'-Dioxyanilin och dess
salter 3)
2-Metoxi-5metylbenzenamin, pKresidin 3)
Exempel på typ eller
användningsområde
C, M
R
97-56-3
(202-591-2)
64-67-5
(200-589-6)
77-78-1
(201-058-1)
101-80-4
(202-977-0)
120-71-8
(204-419-1)
Michaela Bundschuh
Risk2) Tillämpning
Pentadekafluor-oktansyra
335-67-1
Perfluoroktansyra (PFOA) 3) (206-397-9)
Dimetylsulfat 3
TD10073-4
Date
Textilier, mattor,
möbelstoppning, papper
2013-06-20
Textil
2012-12-19
C, M
2012-12-19
C
2012-12-19
C, M
2012-12-19
C
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Intermediär för tillverkning av
färgämne
Textil
2012-12-19
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
18(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Intermediärer
forts
2-Metylbenzen- amin,
o-Toluidin 3)
4,4'-Metylendi-o-toluidin 3)
Toluen-2,4-diamin 3)
Övrigt
5-tert-butyl-2,4,6-trinitro-mxylen (myskxylen) 3)
Dinitrotoluen (2,4-)3)
Bornatriumoxidhydrat3)
Natriumborat3)
Borsyra3)
Hydrazin3)
Azodikarbonamid 3)
CAS-nr1)
(EG-nr)
95-53-4
(202-429-0)
838-88-0
(212-658-8)
95-80-7
(202-453-1)
81-15-2
(201-329-4)
121-14-2
(204-450-0)
12267-73-1
(235-541-3)
1303-96-4,
1330-43-4,
12179-04-3
(215-540-4)
10043-35-3,
11113-50-1
(233-139-2,
234-343-4)
302-01-2
7803-57-8
(206-114-9)
123-77-3
(204-650-8)
84777-06-0
(284-032-2)
1,2-Benzendikarboxylsyradipentylester, grenad
och rak, n-Pentylisopentylftalat, Dipentylftalat 3)
Diisopentylftalat Diamylftalat 3) 605-50-5
(210-088-4)
TD10073-4
Nina Fröidh
Area specialist (department acronym, name)
Michaela Bundschuh
Risk2) Tillämpning
C
Exempel på typ eller
användningsområde
Intermediär till färgämnen
2012-12-19
C
C
Införandedatum
2012-12-19
Intermediär för framställning av
toluendiisocyanat och färgämnen
Textil
2012-12-19
E
Doftämne
2008-11-18
C
Polyuretan(PUR)
Sprängämne (Airbag)
Skärvätska
2010-02-23
Tvättvätska
2010-10-20
R
Skärvätska,
Tvättvätska
2010-10-20
C
Rostskydd
2011-07-05
Gummi och plastvaror
2012-12-19
R
R
R
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Råvara för tillverkning av gummi och
plast
Sprängämnen, flegmatiseringsmedel
2010-10-20
2012-12-19
Sprängämnen
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
19(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Grupp
Övrigt forts
Susanne Brodin Håkansson
Ämnesgrupp
Heneikosafluor undekansyra
3)
Heptakosafluortetradekansyra 3)
N-Metylacetamid 3)
Pentakosa fluortridekansyra 3)
N-pentyl-isopentyl-ftalat 3)
Trikosafluor- dodekansyra 3
Formamid3)
α,α-is[4-(dimety-lamino)fenyl]4 feny-lamino)naftalen-1metanol
C.I. Solvent Blue 4
Vid innehåll av ≥0,1% av
Michlers keton (CAS-nr 90-948) eller Michlers bas (CAS-nr
101-61-1) 3)
4,4'-Bis(dimetylamino)
benzofenon
Michlers keton3)
4,4'-Bis(dimetylamino)
difenylmetan
Michlers bas3)
TD10073-4
Date
CAS-nr1)
(EG-nr)
2058-94-8
(218-165-4)
376-06-7
(206-803-4)
79-16-3
(201-182-6)
72629-94-8
(276-745-2)
776297-69-9
307-55-1
(206-203-2)
75-12-7
(200-842-0)
Michaela Bundschuh
Risk2) Tillämpning
Exempel på typ eller
användningsområde
Införandedatum
vPvB
2012-12-19
vPvB
2012-12-19
R
Laboratoriekemikalie
2012-12-19
vPvB
2012-12-19
R
2012-12-19
vPvB
2012-12-19
R
Används huvudsakligen som
intermediär vid tillverkning av
industrikemikalier
Används huvudsakligen vid
formulering av tryck- och skrivfärger
och som rengöringsmedel för
vindrutor
2012-06-18
6786-83-0
(229-851-8)
C
90-94-8
(202-027-5)
C
Intermediär för tillverkning av färg
och färgämnen
2012-06-18
101-61-1
(202-959-2)
C
Intermediär för tillverkning av färg
och färgämnen
2012-06-18
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Tryck- och skrivfärger
2012-06-18
Rengöringsmedel för vindrutor
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
20(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Grupp
Ämnesgrupp
Övrigt forts
4,4'-Bis(dimetylamino)-4''(metylamino) benzenmetanol
Vid innehåll av ≥0,1% av
Michlers keton (CAS-nr 90-948) eller Michlers bas (CAS-nr
101-61-1) 3)
[4-[[4-Fenylamino-4-(dimety
lamino)fenyl]metylen]cyklohexa2,5-dien-1-yliden]
dimetylammonium klorid
C.I. Basic Blue 26
Vid innehåll av ≥0,1% av
Michlers keton (CAS-nr 90-948) eller Michlers bas (CAS-nr
101-61-1) 3)
[4-[4,4'-Bis(dimetylamino)
benzhydryli-den]cyklo-hexa-2,5dien-1-yliden]dimetylammoniumklorid
C.I. Basic Violet 3
Vid innehåll av ≥0,1% av
Michlers keton (CAS-nr 90-948) eller Michlers bas (CAS-nr
101-61-1) 3)
1)
2)
3)
TD10073-4
Date
Michaela Bundschuh
CAS-nr1)
Risk2) Tillämpning
(EG-nr)
561-41-1
C
Används vid formulering av
skrivbläck och vid tillverkning av
(209-218-2)
andra färger.
Exempel på typ eller
användningsområde
Införandedatum
2012-06-18
2580-56-5
C
(219-943-6)
Används vid formulering av färger
och rengöringsmedel
2012-06-18
548-62-9
C
(208-953-6)
Används huvudsakligen för färgning
av papper och i bläck till
skrivarpatroner.
2012-06-18
CAS-nr = Chemical Abstract Service-nummer. Internationellt använd för att identifiera kemiska ämnen. EG-nummer används för kemiska ämnen på marknaden inom EU.
A = Allergi, C = Cancer, T = Toxiskt, E = Miljöfarligt, N = Neurotoxiskt, O = Ozonnedbrytande, R = Reproduktionsstörande.
Särskilt farligt ämne som finns i kandidatlistan av REACH (förordning (EG) nr 1907/2006).
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
21(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Standard co-ordinator (department acronym, name)
XSXS
UTMS
4
Susanne Brodin Håkansson
List of substances (English version)
For Swedish version see page 5.
4
Substance name
Biocides
Chlorocresol (meta-)
CAS no.1)
(EC no.)
59-50-7
Chlorocresol (ortho-)
1570-64-5
Chloromethyl
isothiazolinone
Methyl isothiazolinone
Kathon CG
Diboron trioxide3)
26172-55-4
2682-20-4
55965-84-9
Thiram (TMTD,
Tetramethylthiuram
disulfide)
Dinoseb (6-sec-butyl-2,4dinitrophenol)3)
Aluminosilicate Refractory
Ceramic Fibres3)
Michaela Bundschuh
Ämnesförteckning (Engelsk version)
För svensk version se sidan 5.
Group
Fibers
Hazard2
E, A
R
137-26-8
A, E
88-85-7
(201-861-7)
-
R
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Application
Example of type or
area of use
This standard applies to every
Lubricants, Paints
deliberate addition of Biocides listed Cutting fluids
Concentration limit is 0 %
E
(probably)
A
1303-86-2
(215-125-8)
Aluminosilicate Refractory
Ceramic Fiber (RCF) 3)
Zirconis Aluminosilicate
Refractory Ceramic Fiber
(Zr-RCF) 3)
TD10073-4
Nina Fröidh
Area specialist (department acronym, name)
C
Inclusion date
1998-02-26
1998-02-26
Aqueous solutions
Cutting fluids
Paints
1998-02-26
1998-02-26
Paints, varnish,
2012-0818
printing ink, detergent,
flame retardant,
catalyst
Paint
1998-02-26
Cleaning agents
The fibres are covered by index
number 650-017-00-8 in Annex VI,
part 3, table 3.2 of Regulation (EC)
No 1272/2008.
Manufacturing
polyacrylamide
High-temperature
insulation and in fire
protection
2012-12-19
2010-02-23
2012-01-03
2012-01-03
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
22(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
Susanne Brodin Håkansson
UTMS
Group
Substance name
Fibers
Zirconia Aluminosilicate,
Refractory Ceramic Fibres3)
Brominated
Several
Flame retardants
CAS no.1)
(EC no.)
-
Michaela Bundschuh
Hazard2
Application
Hardeners
Triphenyl phosphate
HCFC 141 b
115-86-6
1717-00-6
HCFC 142 b
75-68-3
HCFC 22
75-45-6
Toluene diisocyanate (2,4-) 584-84-9
TD10073-4
Toluene diisocyanate (2,6-)
1,3,5-Tris(oxiran-2ylmethyl)-1,3,5-triazinane2,4,6-trione (TGIC)
Triglycidylisocyanurate 3)
1,3,5-tris[(2S and 2R)-2,3epoxypropyl]-1,3,5-triazine2,4,6-(1H,3H,5H)-trione (βTGIC) 3)
E
STD 4158 applies for PBB + PBDE
Textiles
Plastics
1998-02-26
2008-11-18
2008-11-18
2008-11-18
E, A
O
HCFC used as blowing agent in foam Cooling agent
or as solvent is covered by STD4158.
HCFC used as cooling agent is
covered by STD4159.
A asthma C
91-08-7
2451-62-9
(219-514-3)
A,C
T,M
59653-74-6
(423-400-0)
M
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Inclusion date
2010-02-23
Hexabromocyclododecane3) 25637-99-4
(HBCDD) and all major
(247-148-4)
diastereoisomers identified: 3194-55-6
(221-695-9)
α – HBCDD 3)
134237-51-7
β – HBCDD 3)
134237-50-6
γ – HBCDD 3)
134237-52-8
HCFC compounds
Example of type or
area of use
PUR foams
Adhesives
Curing agent. Coating and laminating. Powder paints
Printing ink, screen printing
Plastic goods (softener)
2008-11-18
2008-11-18
1998-02-26
1998-02-26
1998-02-26
1998-02-26
1998-02-26
1998-02-26
2002-08-15
2012-06-18
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
23(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
Susanne Brodin Håkansson
UTMS
Group
Substance name
CAS no.1)
(EC no.)
Hazard2
Complex mixtures
Anthracene oil3)
90640-80-5
(292-602-7)
C
Anthracene oil, anthracene
paste, distn. Lights3)
91995-17-4
(295-278-5)
C, T, M
Anthracene oil, anthracene
paste, anthracene fraction3)
91995-15-2
(295-275-9)
2010-02-23
Anthracene oil, anthracenelow3)
90640-82-7
(292-604-8)
2010-02-23
Anthracene oil, anthracene
paste3)
90640-81-6
(292-603-2)
2010-02-23
Colophony (rosin)
8050-09-7
8052-10-6
73138-82-6
A
Creosote
8001-58-9
and others
C, E
Pitch, coal tar, high temp .
65996-93-2
(266-028-2)
C
Steel construction
Rubber Electrodes
2010-02-23
Coal tar
8007-45-2
65996-91-0
and others
96-18-4 (202486-1)
107-06-2
C
Filler
2002-08-15
2002-08-15
others 1998-02-26
2011-07-05
Additive for fuels
1998-02-26
3)
1,2,3-Trichloropropane3)
Dichloroethane (1,2-)
TD10073-4
Date
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Application
Example of type or
area of use
Inclusion date
Manufacturing of
anthracene and
carbon black
2010-02-23
2010-02-23
Maximum concentration allowed is
1%
Adhesives
Paints
Cutting fluids
2002-08-15
2002-08-15
2002-08-15
others 1998-02-26
Distillation product
1998-02-26
C, R
C
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
24(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
Susanne Brodin Håkansson
UTMS
Group
Substance name
Solvents
Hexane (n-)
Chloroform
1,2-Dichloroethane3)
Bis(2-methoxyethyl) ether3)
N,N dimethylacetamide
(DMAC) 3)
Limonene
CAS no.1)
(EC no.)
110-54-3
67-66-3
107-06-2
(203-458-1)
111-96-6
(203-924-4))
127-19-5
(204-826-4)
138-86-3
5689-27-5
5989-54-8
6876-12-6
7705-14-8
Michaela Bundschuh
Hazard2 Application
N
C, R
C
2012-01-03
R
2012-01-03
A, E
1589-47-5
R
1,2-bis(2methoxyethoxy)ethane
(TEGDME; triglyme) 3)
1,2-dimethoxyethane;
ethylene glycol dimethyl
ether (EGDME) 3)
Trichloroethylene3)
112-49-2
(203-977-3)
R
110-71-4
(203-794-9)
R
79-01-6 (201167-4)
872-50-4
(212-828-1)
C
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Example of type or Inclusion date
area of use
Solvent
1998-02-26
1998-02-26
2012-01-03
R
2-Methoxy-1-propanol
1-Methyl-2-pyrrolidone3)
TD10073-4
Date
R
Maximum concentration allowed is 1 Solvent
%
Maximum concentration allowed is
0.5 %
Processing aid in the manufacture
and formulating of industrial
chemicals.
Processing aid in the manufacture
and formulating of industrial
chemicals
2002-08-15
2002-08-15
2005-12-19
Solvent
2005-12-19
m.fl 1998-02-26
2002-08-15
Solvent
2012-06-18
2012-06-18
Solvent
1998-02-26
2011-07-05
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
25(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
Susanne Brodin Håkansson
UTMS
Group
Substance name
Solvents continued
1-bromopropane (n-propyl
bromide)3)
1,2-Diethoxyethane3)
N,N-dimethylformamide3)
Furan 3)
Metals
Arsenic + compounds
Arsenic trioxide3)
Arsenic pentoxide3)
Triethyl arsenate3)
Lead hydrogen arsenate3)
Arsenic acid3)
Calcium arsenate3)
Trilead diarsenate3)
Lead azide Lead diazide3)
Lead as an alloying
element
Lead styphnate3)
Lead dipicrate3)
TD10073-4
Date
CAS no.1)
(EC no.)
106-94-5
(203-445-0)
629-14-1
(211-076-1)
68-12-2
(200-679-5)
110-00-9
(203-727-3)
Several
1327-53-3
(215-481-4)
1303-28-2
(215-116-9)
15606-95-8
(427-700-2)
7784-40-9
(232-064-2)
7778-39-4
(231-901-9)
7778-44-1
(231-904-5
3687-31-8
(222-979-5)
13424-46-9
(236-542-1)
Several
15245-44-0
(239-290-0)
6477-64-1
(229-335-2)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Hazard Application
2)
R
Example of type or Inclusion date
area of use
Solvents
2012-12-19
R
2012-12-19
R
Solvents,
2012-12-19
Laboratory chemical
Solvents
2012-12-19
C
N, C, E
Wood preservative,
Drying agent
1998-02-26
2008-11-18
2008-11-18
2008-11-18
2008-11-18
C
C
C, R
R
N, E
R
R
Alloy
2002-08-15
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
26(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
Susanne Brodin Håkansson
UTMS
Group
Substance name
Metals continued
Lead and lead compounds
Potassiumhydroxyoctaoxodi
zincatedi-chromate 3)
Dichromium tris
(chromate)3)
Chromium trioxide3)
Acids generated from
chromium trioxide and their
oligomers3) Group
containing:
Chromic acid
Dichromic acid
Oligomers of chromic acid
and dichromic acid
Sodium chromate3)
Ammonium dichromate3)
Sodium dichromate
dihydrate3)
TD10073-4
Date
CAS no.1)
(EC no.)
Several
11103-86-9
(234-329-8)
24613-89-6
(246-356-2)
1333-82-0
(215-607-8)
Several
Michaela Bundschuh
Hazard2
Application
N, E
All electric and
electronic products
containing more than
0.1g lead/ assembly
part must be labelled
according to Scania
STD3871.
Example of type or area of use
Inclusion date
1998-02-26
C
Coating
2012-01-03
C
Surface treatment
2012-01-03
C, M
Metal finishing, conversion
coatings
Metal finishing, conversion
coatings
2011-01-05
C
7738-94-5
(231-801-5)
13530-68-2
(236-881-5)
2011-01-05
2011-01-05
2011-01-05
2011-01-05
7775-11-3
(231-889-5)
7789-09-5
(232-143-1)
7789-12-0,
10588-01-9
(234-190-3)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
C,R,T,M
Surface treatment
2008-11-18
2010-10-20
C, R
Surface treatment
Raw material for pigment
2008-11-18
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
27(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
Substance name
Metals continued
Chromium (6+) compounds
CAS no.1)
(EC no.)
Several
Dichromium tris(chromate)
Michaela Bundschuh
Hazard2 Application
A, C, E
24613-89-6
(246-356-2)
Strontium chromate3)
7789-06-2
(232-142-6)
Zinc chromate
13530-65-9
Cobalt dichloride3)
7646-79-9
(231-589-4)
Lead chromate molybdate 12656-85-8
sulphate3) C.I. Pigment Red (235-759-9 )
104
Lead sulfochromate3)
1344-37-2
C.I Pigment Yellow 34
(215-693-7)
Pentazinc chromate
49663-84-5
octahydroxide3)
(256-418-0)
Cadmium 3)
7444-43
(231-152-8)
CMR
Cadmium oxide 3)
C
3)
Lead bis(tetrafluoroborate)3)
TD10073-4
Nina Fröidh
Area specialist (department acronym, name)
1306-19-0
(215-146-2)
13814-96-5
(237-486-0)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
C, R
Example of type or area of use
For surface treated threaded
Surface treatment Pigment
fasteners and other components
limit value is 0.3 µg/cm2 when
tested according to Swedish
standard SS2392.
For other components and
processes the general
concentration limit of 0.1 % is to be
followed.
Used in mixtures for metal surf
Surface treatment
treatment
Pigment
Inclusion
date
1998-02-26
2011-07-05
1998-02-26
C, R
Catalyst
1998-02-26
2008-11-18
C, R
Paint (Pigment)
2010-02-23
2010-02-23
C
C
R
Surface treatment
Batteries, coated metal products of
iron, steel, brass or aluminium.
In soldering
Manufacturing of other cadmium
compounds
2012-01-03
Batteries, coated metal products of 2013-06-20
iron, steel, brass or aluminium.
In soldering
Laboratory chemicals
2013-0-6-20
Surface treatment, electro plating,
laboratory chemicals
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
28(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
Substance name
Metals continued
Potassium chromate3)
Potassium dichromate3)
Potassium zinc chromate
hydroxid
Nickel
Cobalt(II) sulphate3)
Cobalt(II) dinitrate3)
Lead(II)
bis(methanesulfonate) 3)
Cobalt (II) carbonate3)
Cobalt(II) diacetate3)
Acetic acid, lead salt,
basic3)
Pyrochlore, antimony lead
yellow3)
Lead cyanamidate 3)
Lead dinitrate3)
TD10073-4
Date
CAS no.1)
(EC no.)
7789-00-6
(232-140-5)
7778-50-9
(231-906-6)
11103-86-9
(234-329-8)
7440-02-0
10124-43-3
(233-334-2)
10141-05-6
(233-402-1)
17570-76-2
(401-750-5)
513-79-1
(208-169-4)
71-48-7
(200-755-8)
51404-69-4
(257-175-3)
8012-00-8
(232-328-1)
20837-86-9
244-073-9)
10099-74-8
(233-245-9)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Hazard2 Application
Example of type or area of use
C, T, M
Inclusion date
2010-10-20
2010-10-20
CMR
A
2011-07-05
Only applicable to component
surface treatment exceeding the
limit values for Nickel release
(0,5µg Nickel/cm2/week) Test
methods are EN 1811+A1:2008
and EN 12472:2005.
C, R
C, R
R
Coating in the manufacturing of
electronic components
C, R
R
R
Surface treatment
Raw material for pigments, surface 2011-01-05
treatments, batteries.
Raw material for catalysts, surface 2011-01-05
treatment, batteries.
2012-06-18
Raw material catalysts.
2011-01-05
Catalyst, surface treatments,
pigments
Laboratory chemicals, surface
treatment and paint
Paint, pigments, ink toner
2011-01-05
R
R
2002-08-15
2012-12-19
2012-12-19
2012-12-19
Stabilizers for PVC
Plastic products
2012-12-19
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
29(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
Substance name
Metals continued
Trilead
bis(carbonate)dihydroxide3)
Lead monoxide (lead
oxide)3)
Lead oxide sulfate3)
Tetralead trioxide sulphate3)
Silicic acid, lead salt3)
Sulfurous acid, lead salt,
dibasic3)
Orange lead (lead
tetroxide)3)
CAS no.1)
(EC no.)
1319-46-6
(215-290-6)
1317-36-8
(215-267-0)
12036-76-9
(234-853-7)
12202-17-4
(235-380-9)
11120-22-2
(234-363-3)
62229-08-7
(263-467-1)
1314-41-6
(215-235-6)
Lead titanium trioxide3)
12060-00-3
(235-038-9)
Lead titanium zirconium
12626-81-2
oxide 3)
(235-727-4)
Dibutyltin dichloride (DBTC) 683-18-1
3)
(211-670-0)
Fatty acids, C16-18, lead
91031-62-8
salts 3)
(292-966-7)
Silicic acid, barium-salt
68784-75-8
(1:2), lead-doped 3)
(272-271-5)
Pentalead tetraoxide
12065-90-6
sulphate 3)
(235-067-7)
Tetraethyllead3)
78-00-2
(201-075-4)
TD10073-4
Nina Fröidh
Area specialist (department acronym, name)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Michaela Bundschuh
Hazard2 Application
Example of type or area of use
Inclusion date
C
Pigment in paint
R
Stabilizers, pigment, raw material
for glass and ceramic
manufacturing
Stabilizers for PVC
Lead batteries, glass and ceramics 2012-12-19
Plastic products
2012-12-19
Paint and varnish, Stabilizers for
PVC
Plastic products, Lead batteries
2012-12-19
Glass och ceramics
2012-12-19
R
R
R
2012-12-19
R
Stabilizers for PVC
Plastic products
2012-12-19
R
Pigment, Stabilizers
Lead batteries, glass and
ceramics, rubber and plastic
products
semiconductors, computers,
electric and optical products
Electronic products
2012-12-19
2012-12-19
R
R
2012-12-19
R
Rubber manufacturing
Rubber products
2012-12-19
R
Stabilizers for PVC
Plastic products
2012-12-19
R
Paint
Coating of bulbs
2012-12-19
R
Stabilizers for PVC
Plastic products, Lead batteries
2012-12-19
R
Fuel
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
30(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
Substance name
Metals continued
Trilead dioxide
phosphonate 3)
Dioxobis(stearato)trilead 3)
Plasticizers
Di(2-ethylhexyl)phtalate,
DEHP3)
Dioctylphtalate, DOP
Di(methoxyethyl)phtalate,
DEMP
1,2-Benzenedicarboxylic
acid, di-C7-11-branched
and linear alkyl esters 3)
Hexahydromethylphthalic
anhydride3)
Hexahydro-4-methylphthalic
anhydride 3)
Hexahydro-1-methylphthalic
anhydride 3)
Cyclohexane-1,2dicarboxylic anhydride 3)
Hexahydro-3-methylphthalic
anhydride 3)
The individual isomers [2],
[3] and [4] (including their
cis- and trans- stereo
isomeric forms) and all
possible combinations of
the isomers [1] are covered
by this entry
Dimethyl phthalate
TD10073-4
Date
CAS no.1)
(EC no.)
12141-20-7
(235-252-2)
12578-12-0
(235-702-8)
117-81-7
(204-211-0)
117-84-0
117-82-8
(204-211-0)
68515-42-4
(271-084-6)
Michaela Bundschuh
Hazard2 Application
Example of type or area of use
R
Stabilizers for PVC
Plastic products
Inclusion
date
2012-12-19
R
Stabilizers for PVC
Plastic products
2012-12-19
R
E
Plastics (PVC)
Rubber
Paint
2004-02-24
R
Hardeners, Paints
2002-08-15
2002-08-15
R
PVC
2011-07-05
25550-51-0
(247-094-1)
19438-60-9
(243-072-0)
48122-14-1
(256-356-4)
85-42-7
(201-604-9)
57110-29-9
(260-566-1)
131-11-3
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
2012-12-19
T
Hardeners, Paints
1998-02-26
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
31(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
CAS no.1)
(EC no.)
Plasticizers continued 1,2-Benzenedicarboxylic
71888-89-6
acid, di-C6-8-branched alkyl (276-158-1)
esters, C7-rich 3)
Diisobutyl phthalate3)
84-69-5
(201-553-2)
Butyl benzyl phthalate3)
85-68-7
(201-622-7)
Group
Substance name
Michaela Bundschuh
Hazard Application
Example of type or area of use
Inclusion
date
2011-07-05
R
Plastic, Adhesives
Sealants, Paint
Plastics
Rubber
Adhesives
Paints
2010-02-23
2
E, R
Dibutyl phthalate3)
84-74-2
(201-557-4)
Dipentyl phthalate (DPP) 3) 131-18-0
(205-017-9)
Trischloroethylphosphate (- 115-96-8
2)3)
(204-118-5)
Acids
Hydrofluoric acid (HF)
7664-39-3
Methoxyacetic acid 3)
625-45-6
(210-894-6)
Surface active agents DHTDMAC
61789-80-8
TD10073-4
Additives
DSDMAC
DTDMAC
4-(1,1,3,3tetramethylbutyl)phenol,
ethoxylated [covering welldefined substances and
UVCB substances,
polymers and
homologues]3)
Acrylamide3)
1998-02-26
R
Softener in PVC plastic
R
T
R
E
Paint, sealant, wax, polish
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
C, A, T,
M
Parts of PVC plastic
2013-06-20
Flame retardants in textiles and
plastic
Pickling, Etching
2010-02-23
Lime remover
107-64-2
68783-78-8
79-06-1
(201-173-7)
1998-02-26
1998-02-26
2012-12-19
Softener
1998-02-26
Rinsing agent
Vehicle care products
Surface treated metal products
1998-02-26
1998-02-26
2012-12-19
Water treatment
Plastic
2010-05-07
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
32(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Michaela Bundschuh
Hazard2 Application
Example of type or area of use
Sodium nitrite
CAS no.1)
(EC no.)
7632-00-0
C, T
Anti-rust agent
Diphenylamine
Triphenyl phosphate
122-39-4
115-86-6
E, T
E
4-(1,1,3,3tetramethylbutyl)phenol, (4tert-Octylphenol) 3)
Formaldehyde, oligomeric
reaction products with
aniline3)
Phenolphthalein3)
140-66-9
(205-426-2)
Group
Substance name
Additives continued
2-Methoxyaniline3)
2,2´-–dichlor-4,4´methylenedianiline
(MOCA)3)
Secondary amine
Maximum allowed concentration is
1%.
Nitrite can form carcinogenic
nitrosamines if amines are present
Lubricants
Antioxidant
Flame retardant
Inclusion
date
1998-02-26
1998-02-26
2002-08-15
2012-01-03
25214-70-4
(500-036-1)
C
2012-01-03
77-09-8
(201-004-7)
90-04-0
(201-963-1)
101-14-4
(202-918-9)
C
2012-01-03
C
2012-01-03
C
2012-01-03
111-42-2
110-91-8
101-83-7
110-85-0
Perfluorooctane sulphonate Several
(PFOS)
Antracene3)
120-12-7
(204-371-1)
4-Aminoazobenzene 3)
60-09-3
(200-453-6)
TD10073-4
Nina Fröidh
Area specialist (department acronym, name)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
(C)
Secondary amines can form
Anti-rust agent
carcinogenic nitrosamines if nitrites
are present
2007-10-17
E
Impregnation
2007-10-17
E
Filling material
Carbon Black
Textile
2008-11-18
C
Raw material, used as an
intermediate for the preparation of
pigment
2012-12-19
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
33(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
Additives continued
CAS no.1)
(EC no.)
[Phthalato(2-)]dioxotrilead 3) 69011-06-9
(273-688-5)
3-ethyl-2-methyl-2-(3143860-04-2
methylbutyl)-1,3-oxazolidine (421-150-7)
Substance name
Michaela Bundschuh
Hazard2 Application
Example of type or area of use
R
Rubber products, plastic products
Stabilizers for PVC
R
Inclusion
date
2012-12-19
2012-12-19
3)
Intermediate
Methyloxirane (Propylene
oxide) 3)
Ammonium
pentadecafluorooctanoate
(APFO) 3)
75-56-9
(200-879-2)
3825-26-1
(223-320-4)
C, M
To surfactants
2012-12-19
R
2013-06-20
Pentadecafluorooctanoic
acid (PFOA) 3)
335-67-1
(206-397-9)
R
o-aminoazotoluene 3)
97-56-3
(202-591-2)
64-67-5
(200-589-6)
77-78-1
(201-058-1)
101-80-4
(202-977-0)
120-71-8
(204-419-1)
C
Photographic industry, the
Textiles, carpets, furniture
manufacture of semiconductors.
upholstery, paper
Impregnating agents, floor wax,
paint.
Process chemicals for production
of polytetrafluoroethylene (PTFE)
and polyvinylidene fluoride (PVDF).
Photographic industry, the
manufacture of semiconductors.
Impregnating agents, floor wax,
paint.
Process chemicals for production
of polytetrafluoroethylene (PTFE)
and polyvinylidene fluoride (PVDF).
Dyes, pigments
Textile
Diethyl sulphate 3)
Dimethyl sulphate 3
TD10073-4
4,4'-oxydianiline and its
salts 3)
6-methoxy-m-toluidine (pcresidine) 3)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
2013-06-20
2012-12-19
C, M
2012-12-19
C
2012-12-19
C, M
2012-12-19
C
Intermediate for production of
pigments
Textile
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
34(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
Intermediate contin.
.
Other
Michaela Bundschuh
CAS no.1)
(EC no.)
o-Toluidine 3)
95-53-4
(202-429-0)
4,4'-methylenedi-o-toluidine 838-88-0
3)
(212-658-8)
4-methyl-m95-80-7
phenylenediamine (toluene- (202-453-1)
2,4-diamine)3)
5-tert-butyl-2,4,6-trinitro-m- 81-15-2
xylen (musk xylene) 3)
(201-329-4)
Dinitrotoluen (2,4-)3)
121-14-2
(204-450-0)
Hazard Application
2
)
C
Intermediate for dyes
Formamide3)
R
Substance name
Tetraboron disodium
heptaoxide, hydrate3)
Disodium tetraborate,
anhydrous3)
Boric acid3)
Hydrazine3)
Diisopentylphthalate 3)
Henicosafluoroundecanoic
acid 3)
TD10073-4
Date
75-12-7
(200-842-0)
12267-73-1
(235-541-3)
1303-96-4,
1330-43-4,
12179-04-3
(215-540-4)
10043-35-3,
11113-50-1
(233-139-2,
234-343-4)
302-01-2
7803-57-8
(206-114-9)
605-50-5
(210-088-4)
2058-94-8
(218-165-4)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Example of type or area of use
C
C
Inclusion
date
2012-12-19
2012-12-19
Textile
2012-12-19
E
Fragrance
2008-11-18
C
Paint,
Polyurethane foams
Explosive (Airbags)
2010-02-23
R
Intermediate for production of
pigments and toluene diisocyanate
2012-06-18
Cutting fluids,
Cleaning fluids
2010-10-20
2010-10-20
R
Cutting fluids,
Cleaning fluids
2010-10-20
C
Anti-rust agent
2011-07-05
R
Explosives
2012-12-19
vPvB
2012-12-19
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
35(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
Substance name
Other continued
α,α-Bis[4(dimethylamino)phenyl]-4
(phenylamino)naphthalene1-methanol (C.I. Solvent
Blue 4) [with ≥ 0.1% of
Michler's ketone (EC No.
202-027-5) or Michler's
base (EC No. 202-959-2)] 3)
4,4'-bis(dimethylamino)
benzophenone (Michler’s
ketone) 3)
N,N,N',N'-tetramethyl-4,4'methylenedianiline
(Michler’s base) 3)
Diazene-1,2-dicarboxamide
(C,C'-azodi(formamide))3)
4,4'-bis(dimethylamino)-4''(methylamino)trityl alcohol
[with ≥ 0.1% of Michler's
ketone (EC No. 202-027-5)
or Michler's base (EC No.
202-959-2)] 3)
1,2-Benzenedicarboxylic
acid, dipentylester,
branched and linear 3)
Heptacosafluorotetradecan
oic acid 3)
N-methylacetamide 3)
Michaela Bundschuh
CAS no.1)
(EC no.)
6786-83-0
(229-851-8)
Hazard Application
2
)
C
Used mainly in the formulation of
printing- and writing ink and as
windscreen cleaner
90-94-8
(202-027-5)
C
Intermediate for the manufacturing
of paint and colouring agent.
2012-06-18
101-61-1
(202-959-2)
C
Intermediate for the manufacturing
of paint and colouring agent.
2012-06-18
123-77-3
(204-650-8)
561-41-1
(209-218-2)
84777-06-0
(284-032-2)
376-06-7
(206-803-4)
79-16-3
(201-182-6)
Pentacosafluorotridecanoic 72629-94-8
acid 3)
(276-745-2)
TD10073-4
Nina Fröidh
Area specialist (department acronym, name)
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
C
R
Raw material for production of
rubber and plastics.
Used in the formulating of ink and
manufacturing of other colours.
Explosives, phlegmatizer
vPvB
R
vPvB
Example of type or area of use
Printing- and writing ink
Windscreen cleaner
Rubber and plastic products
Inclusion
date
2012-06-18
2012-12-19
2012-06-18
2012-12-19
2012-12-19
Laboratory chemicals
2012-12-19
2012-12-19
STD4159
STANDARD
Issue
Info Class
Page
2013-07-09
24
Public
36(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
Group
CAS no.1)
(EC no.)
N-pentyl-isopentylphthalate 776297-69-9
3)
Tricosafluorododecanoic
307-55-1
acid 3
(206-203-2)
[4-[[4-anilino-1-naphthyl][4- 2580-56-5
(dimethylamino)phenyl]met (219-943-6)
hylene]cyclohexa-2,5-dien1-ylidene]
dimethylammonium chloride
(C.I. Basic Blue 26) [with ≥
0.1% of Michler's ketone
(EC No. 202-027-5) or
Michler's base (EC No.
202-959-2)] 3
[4-[4,4'-bis(dimethylamino)
584-62-9
benzhydrylidene]cyclohexa- (208-953-6)
2,5-dien-1ylidene]dimethylammonium
chloride (C.I. Basic Violet 3)
[with ≥ 0.1% of Michler's
ketone (EC No. 202-027-5)
or Michler's base (EC No. 202-959Substance name
Other continued
2)]
1)
2)
3)
TD10073-4
Date
Michaela Bundschuh
Hazard Application
2
)
R
Example of type or area of use
vPvB
2012-12-19
C
Used in the formulating of ink and
cleaning agent.
2012-06-18
C
Is mainly used for dyeing paper and
paint for cartridges
2012-06-18
3)
CAS no = Chemical Abstract Service registration number. Internationally applied index identifying chemical substances. EC-numbers are used on the market within the EU.
A = Allergy, C = Cancer, T = Toxic, E = Environmentally hazardous, N = Neurotoxic, O = Ozone depletion, R = Reproductive hazards.
Substance of very high concern listed in Candidate List of REACH (regulation (EC) no. 1907/2006).
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
Inclusion
date
2012-12-19
STD4159
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
37(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
5
Susanne Brodin Håkansson
Appurtenant documents
5
Michaela Bundschuh
Tillhörande dokument
The documents listed below supplement this
standard and are necessary for the application of the standard.
Angivna dokument kompletterar denna standard och erfordras för standardens tillämpning.
The latest issue of the document applies
when the issue has not been stated.
Då utgåva inte angivits gäller senaste utgåva
av dokumentet.
Dokumentbeteckning
Utgåva
Document designation Issue
Titel
Title
STD4158
Chemical substances which shall not be used - Scania
Black list
-
Kemiska ämnen som inte får användas - Scanias
svarta lista
STD10073-4
STD4384en
Criteria for limitation and reporting of chemical
substances (for Scania internal distribution only,
endast för Scania-intern spridning)
STD3871
-
Material marking on parts - Recycling
Materialmärkning på artiklar - Återvinning
Inorganic coatings - Determination of free hexavalent
chromium in passivation layers
Oorganiska ytbeläggningar - Bestämning av fri halt
sexvärt krom i passiveringsskikt.
STD4364
-
EN 1811+A1:2008
-
Reference test method for release of nickel from
products intended to come into direct and prolonged
contact with the skin
EN 12472:2005
-
Method for the Simulation of Wear and Corrosion of
Coated Items
Word template
DECLARATION OF
SUBSTANCES FOR
PRODUCTS listed in
STD4158 and STD4159
-
Declaration of substances listed in STD4158 and
STD4159
Word template
DECLARATION OF
SUBSTANCES FOR
PROCESSES listed in
STD4158 and STD4159
STD3868en
-
Form for declaration by suppliers of substances listed
in STD4158 and STD4159. The form will be found at
the Supplier Portal, not at Scania Standards.
Declaration of substances for Supplier Processes
listed in STD4158 and STD4159
The form will be found at the Supplier Portal, not at
Scania Standards.
-
SCANIA CUSTOMER SPECIFIC REQUIREMENTS
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.
STD4159
STD10073-4
STANDARD
Date
Issue
Info Class
Page
2013-07-09
24
Public
38(38)
Approved by/Assignor (department acronym, name)
Standard responsible (department acronym, name)
XS
UTMS
Stefan Persson
Nina Fröidh
Area specialist (department acronym, name)
Standard co-ordinator (department acronym, name)
XSXS
UTMS
Susanne Brodin Håkansson
STD4230en
-
STD4248en
-
STD3901
-
STD4321
-
Michaela Bundschuh
ENVIRONMENTAL AND QUALITY ASSURANCE
DEMANDS – SUPPLEMENT TO NAP (NonAutomotive Products) PURCHASE CONTRACT
Environmental and quality assurance demands Supplement to purchase orders and contracts for
deliveries to the Buses and Coaches group
Quality requirements for suppliers of truck bodies and
trailers
Requirements for suppliers of truck bodies
Krav för leverantörer av påbyggnader och efterfordon
där så anges av Scania.
The electronic issue on the Scania Standards homepage on InLine is the valid original issue.