HVAC Related Products
Transcription
HVAC Related Products
HVAC RELATED PRODUCTS ECCO™ is proud to be a member of: MANUFACTURING EXCELLENCE HVAC Steel Duct Pipe & Fittings SMACNA Sheet Metal and Air Conditioning Contractors’ National Association www.smacna.org HRAI Heating, Refrigeration and Air Conditioning Institute of Canada www.hrai.ca HARDI Heating, Air-conditioning & Refrigeration Distributors International www.hardinet.org ADI Air Distribution Institute www.steelduct.org AD Affiliated Distributors™ www.adhq.com CME Canadian Manufacturers & Exporters www.cme-mec.ca SPIDA Spiral Duct Manufacturers Association www.spida.org REV. W-3 HVAC RELATED PRODUCTS INDEX AIR CONNECTORS — NON-INSULATED FIBERGLASS CLOTH FLEX — MODEL SLP-10..................................................................................................................... J10-9 FOIL FLEX — MODEL S-LD....................................................................................................................................................... J10-9 AIR DUCT FIBERGLASS CLASS 1 CLOTH FLEX — NON-INSULATED — PRO SERIES — MODEL STL — FOR ALL PRESSURE SYSTEMS............................................................................................................... J10-10 INSULATED FLEX — MODEL M-KE....................................................................................................................................... J10-10 INSULATED FLEX — MODEL G-KM AIR............................................................................................................................... J10-11 INSULATED FLEX — MODEL KP............................................................................................................................................. J10-11 ALUMINUM ROOF DRAINS — PLASTIC TOP............................................................................................................................. J10-7 ALUMINUM STACK CAPS.................................................................................................................................................................. J10-6 ALUMINUM STACKS............................................................................................................................................................................ J10-7 BIRDSCREEN — GALVANIZED........................................................................................................................................................ J10-4 BLAST GATES — FULL COLLAR...................................................................................................................................................... J10-4 BRISTLE BRUSHES................................................................................................................................................................................ J10-6 DIFFUSERS CEILING ARCHITECTURAL OMNI DIFFUSER (LAY-IN T-BAR)..................................................................................................... J10-8 LAY-IN T-BAR — SQUARE...................................................................................................................................................... J10-7 ROUND.......................................................................................................................................................................................... J10-7 DIFFUSER DAMPERS.................................................................................................................................................................... J10-8 OPPOSED BLADE...................................................................................................................................................................... J10-8 FLOOR — PLASTIC........................................................................................................................................................................ J10-3 DUCTCAP®.............................................................................................................................................................................................. J10-4 DUCTULATORS..................................................................................................................................................................................... J10-3 EGGCRATES 1/2" × 1/2" CORE............................................................................................................................................................................. J10-8 ALUMINUM...................................................................................................................................................................................... J10-8 PLASTIC............................................................................................................................................................................................. J10-8 ELBOWS — DRYER EXHAUST DUCT............................................................................................................................................ J10-8 GASKET — BUTYL GASKET (SEALANT TAPE)............................................................................................................................ J10-4 MULT-E PURPOSE FOIL TAPE........................................................................................................................................................... J10-6 MULT-E STRAP...................................................................................................................................................................................... J10-6 THE DRYERBOX®................................................................................................................................................................................... J10-3 TYPE B OVAL GAS VENT AND FITTINGS ..................................................................................................................................... J10-5 WALL CAPS — WITH DAMPER........................................................................................................................................................ J10-6 WALL THIMBLES — ROUND PIPE.................................................................................................................................................. J10-5 LEGEND ABBREVIATIONS: CTN/QTY = Carton Quantity WT/100 = Weight per 100 Pieces J10-2 ECCO Manufacturing™ I www.eccomfg.com REV. W-3 HVAC RELATED PRODUCTS DUCTULATORS The ECCO Ductulator provides a quick and efficient way to size duct work according to friction, velocity, and depth criteria. ITEM # DESCRIPTION For Round and Rectangular Duct 799890 Uses Equal-Friction Method and/or Velocity Reduction Method CTN/QTY WT/100 * 30 *Product shipped individually. FLOOR DIFFUSERS — PLASTIC • • • • • • 75% Free Area 0° to 30° angled louvers provide widespread air deflection Textured finish provides a scratch resistant surface Reinforced corners for superior strength Gear driven damper with positive locking option Screw knockouts allow for wall or ceiling installation ITEM # MODEL COLOR FREE AREA (SQ. IN.) CTN/QTY WT/100 701840 701841 701843 701845 701847 701842 701844 701846 701848 701850 E60P 3 × 10 E60P 3 × 10 E60P 3 × 10 E60P 3 × 10 E60P 3 × 10 E60P 4 × 10 E60P 4 × 10 E60P 4 × 10 E60P 4 × 10 E60P 4 × 10 White Black Grey Brown Beige White Grey Brown Beige Black 18.684 18.684 18.684 18.684 18.684 27.184 27.184 27.184 27.184 27.184 30 30 30 30 30 20 20 20 20 20 45 45 45 45 45 54 54 54 54 54 THE DRYERBOX® Dryer Vent Hose Receptacle • Doubles as a gas connection receptacle • Meets code requirements as a clean-out See www.dryerbox.com for more information. ITEM # MODEL 425 350 4D 3D 2×6 2×4 2×6 2×4 683018 480 2×6 683010 683012 683014 683016 SIZE EXHAUST DIRECTION Upward Upward Downward Downward Upward/ Downward CTN/QTY WT/100 6 460 5 6 5 6 460 460 460 460 480 3D 4D 350 425 – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – REV. W-3 www.eccomfg.com I ECCO Manufacturing™ J10-3 HVAC RELATED PRODUCTS DUCTCAP® A reusable temporary end cap for air handling systems, made from polypropylene and elastic. ITEM # MODEL DESCRIPTION CTN/QTY 683904 683906 683908 683910 683912 683914 0610 1014 1418 1824 2430 3038 Fits 6" to 9" Fits 10" to 14" Fits 14" to 18" Fits 18" to 24" Fits 24" to 30" Fits 30" to 38" 25 25 25 25 25 25 Dimensions (inches) SIZE WEIGHT (inches) (lbs) 3 4 5 6 7 8 9 10 12 14 A C D E 4.94 6.13 7.25 8.75 10.38 11.88 13.38 14.81 17.75 19.75 2.31 2.31 2.44 2.62 3.13 3.56 4.13 4.66 5.25 5.69 0.94 0.94 1.00 1.00 1.25 1.50 1.69 1.94 2.50 2.50 B 0.75 2.94 3.94 1.00 3.94 5.06 1.50 4.94 5.88 2.00 5.94 6.94 2.00 6.94 8.00 4.50 7.94 8.94 5.50 8.88 9.81 6.00 9.88 10.81 10.00 11.75 12.69 13.50 13.75 15.06 BLAST GATES — FULL COLLAR This unique concept in gate design is comprised of a one piece body and a manually opened gate. • The one piece body construction offers consistency, reliability and insensitivity to vibration. • Tight tolerance between the body and the gate reduces seepage to a minimum. • Entirely fabricated from aluminum, the Blast Gate is impervious to humid environments. ITEM # MODEL DESCRIPTION CTN/QTY WT/100 741303 741304 741305 741306 741307 741308 741309 741310 741312 741314 FC3 FC4 FC5 FC6 FC7 FC8 FC9 FC10 FC12 FC14 3" Blast Gate 4" Blast Gate 5" Blast Gate 6" Blast Gate 7" Blast Gate 8" Blast Gate 9" Blast Gate 10" Blast Gate 12" Blast Gate 14" Blast Gate 1 1 1 1 1 1 1 1 1 1 78 80 90 100 110 130 140 150 160 180 2° C E D B Dimensions (inches) SIZE WEIGHT (inches) (lbs) 3 4 5 6 7 8 9 10 12 14 A B 0.75 2.94 3.94 1.00 3.94 5.06 1.50 4.94 5.88 2.00 5.94 6.94 2.00 6.94 8.00 4.50 7.94 8.94 5.50 8.88 9.81 6.00 9.88 10.81 10.00 11.75 12.69 13.50 13.75 15.06 C D E 4.94 6.13 7.25 8.75 10.38 11.88 13.38 14.81 17.75 19.75 2.31 2.31 2.44 2.62 3.13 3.56 4.13 4.66 5.25 5.69 0.94 0.94 1.00 1.00 1.25 1.50 1.69 1.94 2.50 2.50 BIRDSCREEN — GALVANIZED SQ. FT. CTN/QTY WT/100 706195 1/2" × 1/2" x 36" x 100 ft. 706191 1/2" × 1/2" × 48" × 100 ft. ITEM # DESCRIPTION 300 400 * * 170 170 706197 1/4" × 1/4" × 36" × 100 ft. 300 * 200 706193 1/4" × 1/4" × 48" × 100 ft 706200 3/4" × 3/4" × 48" × 100 ft. 706202 1" × 1" × 48" × 100 ft. 400 400 400 * * * 200 260 250 2° C *Sold per full roll only. BUTYL GASKET (SEALANT TAPE) ITEM # DESCRIPTION 704930 3/4" × 3/16" × 25' Butyl Gasket CTN/QTY WT/100 5 250 B D E – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – J10-4 ECCO Manufacturing™ I www.eccomfg.com REV. W-3 HVAC RELATED PRODUCTS WALL THIMBLES — ROUND PIPE ITEM # MODEL SIZE (") CTN/QTY WT/100 614153 614154 614155 614156 614157 614158 3RWT 4RWT 5RWT 6RWT 7RWT 8RWT 3 4 5 6 7 8 12 12 12 12 * * 133 133 150 167 200 200 *Product shipped individually. TYPE B OVAL GAS VENT AND FITTINGS — 4" ITEM # MODEL 614002 614004 614006 614008 614010 614012 614014 614016 614018 614020 614036 614022 614024 614031 614032 614026 614030 614028 4OV5 4OV4 4OV3 4OV2 4OV18 4OV12 4OV6 4OV12A 4OVSL 4OVFL 4OVWVT 4OV-RD 4RD-OV 4OVFS 4OVFS6 4OVAC 4OVF 4OVSC DESCRIPTION CTN/QTY WT/100 4" × 5 ft. Oval Gas Vent 4" × 4 ft. Oval Gas Vent 4" × 3 ft. Oval Gas Vent 4" × 2 ft. Oval Gas Vent 4" × 18" Oval Gas Vent 4" × 12" Oval Gas Vent 4" × 6" Oval Gas Vent 4" × 12" Oval Gas Vent Adj. Length 4" × 45° Elbow – Standard 4" × 45° Elbow – Flat 4" Wall Vent Tee 4" Oval to Round Adapter 4" Round to Oval Adapter 4" Firestop Spacers 2" × 4" 4" Firestop Spacers 2" × 6" 4" Oval White Cap 4" Oval Flashing 4" Oval Storm Collar 6 6 6 6 6 6 6 6 6 6 6 6 6 25 pairs * 24 12 24 717 600 450 300 233 150 83 150 133 133 – 100 100 148 – – – – *Product shipped individually. Oval Tee Cap Oval Wall Vent Tee Oval Gas Vent Firestop Spacers 45° Elbow Standard 45° Elbow Flat TYPE B OVAL GAS VENT AND FITTINGS — 5" ITEM # MODEL 614102 614104 614106 614108 614110 614112 614114 614116 614118 614120 614134 614122 614124 614132 614126 614130 614128 5OV5 5OV4 5OV3 5OV2 5OV18 5OV12 5OV6 5OV12A 5OVSL 5OVFL 5OVT 5OV-RD 5RD-OV 5OVFS6 5OVAC 5OVF 5OVSC DESCRIPTION 5" × 5 ft. Oval Gas Vent 5" × 4 ft. Oval Gas Vent 5" × 3 ft. Oval Gas Vent 5" × 2 ft. Oval Gas Vent 5" × 18" Oval Gas Vent 5" × 12" Oval Gas Vent 5" × 6" Oval Gas Vent 5" × 12" Oval Pipe Gas Vent Adj. Length 5" × 45° Elbow – Standard 5" × 45° Elbow – Flat 5" Oval Wall Tee 5" Oval to Round Adapter 5" Round to Oval Adapter 5" Firestop Spacers 2" × 6" 5" Oval White Cap 5" Oval Flashing 5" Oval Storm Collar *Product shipped individually. CTN/QTY WT/100 4 4 6 6 6 6 6 6 6 6 6 6 6 * 12 12 * 1025 850 616 400 333 217 117 217 117 167 – 167 167 – – – – Oval Wall Vent Tee Oval Tee Cap Oval Gas Vent Firestop Spacers 45° Elbow Standard 45° Elbow Flat – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – REV. W-3 www.eccomfg.com I ECCO Manufacturing™ J10-5 HVAC RELATED PRODUCTS WALL CAPS — WITH DAMPER ITEM # 681730 681731 MODEL DESCRIPTION CTN/QTY WT/100 10 10 220 250 7393-5" 3-1/4" × 10" – Galvanized – 5" Extension 7393-10" 3-1/4" × 10" – Galvanized – 10" Extension BRISTLE BRUSHES •Disposable • Pure bristles • Natural wooden handle ITEM # DESCRIPTION 705168 705169 705170 705171 1" Bristle – Disposable Brush 1-1/2" Bristle – Disposable Brush 2" Bristle – Disposable Brush 3" Bristle – Disposable Brush CTN/QTY WT/100 12 12 12 12 3 4 6 7 MULT-E PURPOSE FOIL TAPE • Seals joints in duct work and insulation • Conforms to any shape •High tack strength – durable • UL approved ITEM # DESCRIPTION 706050 706051 706052 706053 2" × 50 yards Foil Tape (51 mm × 45.7 mm) 3" × 50 yards Foil Tape (76 mm × 45.7 mm) 2" × 50 yards FSK Foil Tape (51 mm × 45.7 mm) 3" × 50 yards FSK FoilTape (76 mm × 45.7 mm) CTN/QTY WT/100 24 16 24 16 100 150 100 150 MULT-E STRAP • Hundreds of uses • Easy to bend •Wavy edge allows easier cutting to desired lengths; also allows ease of overlapping and twisting in any configuration. ITEM # MODEL DESCRIPTION 682910 682911 682912 682914 682922 682926 682920 MS3425G MS3450G MS34100G MS1225G MS3425S MS3425P MS1225S 3/4" × 25 ft. – Galvanized 3/4" × 50 ft. – Galvanized 3/4" × 100 ft. – Galvanized 1/2" × 25 ft. – Galvanized 3/4" × 25 ft. – Steel 3/4" × 25 ft. – PVC Coated Steel 1/2" × 25 ft. – Steel GAUGE CTN/QTY WT/100 24 24 24 24 24 24 22 10 10 5 10 10 10 10 145 290 581 103 180 150 126 ALUMINUM STACK CAPS Ø A – FITS STANDARD ABS PIPE ITEM # SIZE (") A (") B (") CTN/QTY WT/100 379810 379811 379812 379813 379814 1-1/4 1-1/2 2 3 4 1-1/4 1-1/2 2 3 4 2 2-1/2 2-3/4 3-3/4 5 * * * * * 35 40 50 65 82 *Product shipped individually. 2-1/2 Ø B – FITS ECCO ALUMINUM PLUMBING STACK – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – J10-6 ECCO Manufacturing™ I www.eccomfg.com REV. W-3 HVAC RELATED PRODUCTS ALUMINUM STACKS ITEM # SIZE (") A (") B (") C (") CTN/QTY WT/100 379800 379801 379802 379803 379804 1-1/4 1-1/2 2 3 4 1-7/8 2-3/8 2-5/8 3-5/8 4-7/8 10 10 11 12 12 12 12 12 12 12 * * * * * 105 110 115 125 135 Ø A (I.D.) C *Product shipped individually. ØB ALUMINUM ROOF DRAINS — PLASTIC TOP ITEM # SIZE (") A (") B (") C (") CTN/QTY WT/100 379832 379833 379834 2 3 4 1-3/4 2-3/4 3-3/4 11 11 11 13-1/2 13-1/2 13-1/2 10 10 10 180 190 200 (Ø C) B (Ø A) CEILING DIFFUSERS LAY-IN T-BAR — SQUARE Steel, high performance three cone diffuser. ITEM # MODEL SIZE (") MAX /CFM 717160 717170 717017 717182 717184 717186 717188 TMS-3 TMS-3 TMS-3 TMS-3 TMS-3 TMS-3 TMS-3 6 – 12 × 12 8 – 12 × 12 6 – 20 × 20 8 – 24 × 24 10 – 24 × 24 12 – 24 × 24 14 – 24 × 24 314 559 — 559 873 1257 1710 ROUND Steel, round diffuser with two discharge patterns. ITEM # MODEL SIZE (") MAX /CFM 717030 717032 717034 717036 717038 TMR TMR TMR TMR TMR 6 8 10 12 14 275 490 763 1100 1490 – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – REV. W-3 www.eccomfg.com I ECCO Manufacturing™ J10-7 HVAC RELATED PRODUCTS CEILING DIFFUSERS (cont’d) ARCHITECTURAL OMNI DIFFUSER (LAY-IN T-BAR) Steel plaque, face diffuser ITEM # 721320 721322 721306 721308 721310 721312 721314 MODEL SIZE (") MAX /CFM OMNI OMNI OMNI OMNI OMNI OMNI OMNI 6 – 12 × 12 8 – 12 × 12 6 – 24 × 24 8 – 24 × 24 10 – 24 × 24 12 – 24 × 24 14 – 24 × 24 274 489 274 489 763 1099 1497 DIFFUSER DAMPERS OPPOSED BLADE DAMPER Steel, neck-mounted opposed blade damper. Mounts above neck. ITEM # MODEL DESCRIPTION 721336 721338 721339 721340 721341 AG-75 AG-75 AG-75 AG-75 AG-75 Opposed Opposed Opposed Opposed Opposed SIZE (") Blade Damper Blade Damper Blade Damper Blade Damper Blade Damper 6 8 10 12 14 EGGCRATES ALUMINUM ITEM # SIZE (") DESCRIPTION 703142 24 × 48 White Aluminum Core PLASTIC ITEM # SIZE (") DESCRIPTION 703150 24 × 48 3/8" Thick 1/2" × 1/2" CORE ITEM # MODEL DESCRIPTION 703142 703150 24 x 48 24 x 48 White Aluminum 3/8" Thick Styrene Plastic CTN/QTY 12 15 DRYER EXHAUST DUCT ELBOWS • 2-piece construction • Fastening tabs for hook and twist assembly • Notch for exact snaplock pipe fit • Secondary securing accomplished with pre-drilled screw holes See www.dryer-ell.com for more information. ITEM # MODEL 683008 683009 LT45 LT90 DESCRIPTION RADIUS (") LGTH (") CTN/QTY WT/100 10" 10" 9 18 12 12 12 18 DRYER-ELL 45° Turn, 4" Diameter DRYER-ELL 90° Turn, 4" Diameter – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – J10-8 ECCO Manufacturing™ I www.eccomfg.com REV. W-3 HVAC RELATED PRODUCTS AIR CONNECTORS FOIL FLEX — NON-INSULATED — MODEL S-LD Non-insulated air connector with a reinforced metallized film laminate jacket, permanently bonded to a corrosion resistant coated spring steel wire helix. For all pressure heating and cooling systems. An economical alternative where insulated duct is not required. ITEM # MODEL SIZE (") LENGTH (FT) 702977 702978 702979 702980 702982 702984 702986 702988 702989 S-LD S-LD S-LD S-LD S-LD S-LD S-LD S-LD S-LD 3 4 5 6 7 8 10 12 14 25 25 25 25 25 25 25 25 25 CLASS 1 CONNECTOR Meets UL 181 and NFPA 90A-90B Fire Codes Specifications Diameter: Pressure Rating: Positive: Negative: Velocity: Temperature Range: 3 – 14 inches ID (WG) 10 inches (3" – 14" ID) 1 inch (3" – 14" ID) 5000 FPM -20°F to 250°F FIBERGLASS CLOTH FLEX — NON-INSULATED — MODEL SLP-10 Non-insulated air connector with extremely strong woven fiberglass fabric with flame retardant coating, permanently bonded to a corrosion resistant coated spring steel wire helix. For all pressure heating and cooling systems. A superior alternative in applications where insulated duct is not required, or cannot be used. ITEM # MODEL SIZE (") LENGTH (FT) 702899 702900 702901 702902 702903 702904 702905 702906 702907 702909 702911 SLP-10 SLP-10 SLP-10 SLP-10 SLP-10 SLP-10 SLP-10 SLP-10 SLP-10 SLP-10 SLP-10 2 3 4 5 6 7 8 9 10 12 14 25 25 25 25 25 25 25 25 25 25 25 CLASS 1 CONNECTOR Meets UL 181 and NFPA 90A-90B Fire Codes Specifications Diameter: Pressure Rating: Positive: Negative: Velocity: Temperature Range: 2 – 14 inches ID (WG) 10 inches (2" – 14" ID) 1 inch (2" – 14" ID) 5000 FPM -20°F to 250°F – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – REV. W-3 www.eccomfg.com I ECCO Manufacturing™ J10-9 HVAC RELATED PRODUCTS AIR DUCT FIBERGLASS CLASS 1 CLOTH FLEX — NON-INSULATED — PRO SERIES — MODEL STL — FOR ALL PRESSURE SYSTEMS Flexible air duct, extremely strong with heavy fiberglass cloth fabric permanently bonded to a corrosion resistant spring steel wire helix. For low to high pressure heating and cooling systems. A superior alternative in applications where insulated duct is not required or cannot be used, e.g., clean room applications. Unlike connector-rated products, S-TL is not limited to length of run. • Easily shaped to fit oval inlets and connects to fittings fast. CLASS 1 AIR DUCT •All components of S-TL, S-LP-10 and S-LD are self-extinguishing and will not support flame. Meets UL 181 • Unique construction will not unravel when cut. and NFPA 90A-90B Fire Codes • Ideal for residential dryer and bathroom applications. ITEM # MODEL SIZE (") LENGTH (FT) 702913 702914 702916 702917 702918 STL STL STL STL STL 16 18 20 4 6 15 15 15 25 25 Specifications Diameter: Pressure Rating: Positive: Negative: Velocity: Temperature Range: 2 – 20 inches ID (WG) 16 inches (2" – 10" ID); 10 inches (12" – 20" ID) 1 inch (2" – 20" ID) 6000 FPM -20°F to 250°F INSULATED FLEX — MODEL M-KE Highly efficient, thermally insulated flexible duct for use in low and medium pressure heating and cooling systems. New and improved bi-directional reinforced metallized vapour barrier will not unravel. Acoustically rated, self-extinguishing chlorinated polyethylene (CPE) core easily expands over fittings. Core is permanently bonded to a coated spring steel wire helix that supports ample blanket of fiberglass insulation, providing a double air seal. ITEM # MODEL SIZE (") LENGTH (FT) 702818 702819 702820 702821 702822 702823 702824 702826 702827 702829 702830 M-KE M-KE M-KE M-KE M-KE M-KE M-KE M-KE M-KE M-KE M-KE 4 5 6 7 8 9 10 12 14 16 18 25 25 25 25 25 25 25 25 25 25 25 CLASS 1 AIR DUCT Meets UL 181 and NFPA 90A-90B Fire Codes Specifications Diameter: Pressure Rating: Positive: Negative: Velocity: Temperature Range: R-Value: 4 – 20 inches ID (WG) 10 inches (4" – 12" ID); 6 inches (14" – 16" ID); 4 inches (18" – 20" ID) 1 inch (4" – 12" ID); 1/2 inch (14" – 20" ID) 5000 FPM -20°F to 200°F cont. -20°F to 250°F intermittent R-4.2, R-6.0, R-8.0 – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – J10-10 ECCO Manufacturing™ I www.eccomfg.com REV. W-3 HVAC RELATED PRODUCTS AIR DUCT (cont’d) INSULATED FLEX — MODEL KP Strong polyester film laminated and encapsulating a heavy, corrosion-resistant steel wire helix, forms the inner core and supports a thick blanket of fiberglass insulation over a fiberglass scrim. The outer vapour barrier is a jacket of durable black polyethylene. Designed for low to medium pressure systems. SIZE (") LENGTH (FT) Meets UL 181 and NFPA 90A-90B Fire Codes M AF LEX K P ® CT 25 25 25 25 25 25 25 25 25 25 25 25 U 4 5 6 7 8 9 10 12 14 16 18 20 D KP KP KP KP KP KP KP KP KP KP KP KP ER MODEL TH ITEM # 702878 702879 702880 702881 702882 702883 702884 702885 702886 702887 702888 702889 Specifications Diameter: Pressure Rating: Positive: Negative: Velocity: Temperature Range: R-Value: 4 – 20 inches ID (WG) 10 inches (4" – 16" ID); 6 inches (18" – 20" ID) 1 inch (4" – 12" ID); 1/2 inch (14" – 20" ID) 5000 FPM -20°F to 250°F cont. R-4.2, R-6.0, R-8.0 INSULATED FLEX — MODEL G-KM AIR Highly efficient, thermally insulated flexible duct for use in low and medium pressure heating and cooling systems. Acoustically rated, self-extinguishing CPE core easily expands over fittings. Core is permanently bonded to a coated spring steel wire helix that supports an ample blanket of fiberglass insulation over a fiberglass scrim and a tough polyethylene vapour barrier. Smooth liner, insulation, and tough vapour barrier provide even airflow and a double air seal. ITEM # 702987 702990 702991 702992 702993 702994 702995 702996 702997 702998 702999 702983 702985 MODEL G-KM G-KM G-KM G-KM G-KM G-KM G-KM G-KM G-KM G-KM G-KM G-KM G-KM SIZE (") 3 4 5 6 7 8 9 10 12 14 16 18 20 LENGTH (FT) 25 25 25 25 25 25 25 25 25 25 25 25 25 Meets UL 181 and NFPA 90A-90B Fire Codes CLASS 1 AIR DUCT Specifications Diameter: Pressure Rating: Positive: Negative: Velocity: Temperature Range: R-Value: 3 – 20 inches ID (WG) 6 inches (3" – 16" ID); 4 inches (18" – 20" ID) 1 inch (4" – 12" ID); 1/2 inch (14" – 20" ID) 5000 FPM -20°F to 200°F cont. -20°F to 250°F intermittent R-4.2, R-8.0 – E.&O.E. – Subject to Change Without Notice – May Not Be Available At All Locations – REV. W-3 www.eccomfg.com I ECCO Manufacturing™ J10-11 www.eccomfg.com Langley Distribution Calgary Distribution Kent Distribution 19860 Fraser Highway Langley, British Columbia Canada V3A 4C9 Phone: 604-530-4151 Toll Free: 1-877-955-4805 Fax: 604-533-9335 21 – 11150 38th Street, S.E. Calgary, Alberta Canada T2C 2Z6 Phone: 403-720-0895 Toll Free: 1-877-955-4815 Fax: 403-720-0897 20001 87th Ave. S, Bldg E Kent, Washington USA 98031 Phone: 253-872-3721 Toll Free: 1-800-207-6859 Fax: 253-872-3724 REV. W-3