Laser Marksmanship Training Systems Interoperable Deployable

Transcription

Laser Marksmanship Training Systems Interoperable Deployable
EOTech
Laser Marksmanship Training Systems
Interoperable Deployable Communications Systems
TABLE OF
CONTENTS
This material is L-3 EOTech general capabilities information and does not contain any controlled technical data as defined within the International Traffic in Arms Regulations
(ITAR) or Export Administration Regulations (EAR).
LMTS® - Laser Marksmanship Training Systems
L-3 EOTech provides both the Laser Marksmanship Training System (LMTS) family of small arms marksmanship
training devices which help qualified instructors and individual shooters build strong firearms handling and
marksmanship skills and the SHERPA® family of Interoperable Deployable Communication Systems that
meet your emergency communications needs – disaster recovery, emergency management, continuity of
operations, and rapid infrastructure.
L-3 EOTech is fully committed to meeting and exceeding the needs of its customers both in the U.S. and
abroad by offering the highest quality products and services.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
2
Table of Contents
LMTS® - Laser Marksmanship Training System
LMTS® - Components & Accessories
110 System.............................................................................. 5
Laser Marksmanship Training System Kits.............................33
115 System.............................................................................. 5
Carrying Cases....................................................................... 35
115A System............................................................................ 6
System Cables........................................................................ 37
115 Patrol Kit...........................................................................6
System Accessories................................................................ 37
190-1 System...........................................................................8
Laser Transmitter Brackets.................................................... 38
190-3 System...........................................................................8
Laser Transmitter Rods.......................................................... 39
360 System............................................................................ 10
Laser Transmitters................................................................. 40
365 System............................................................................ 11
Laser Accessories & Batteries................................................ 42
460 System............................................................................ 12
Laser Alignment Devices........................................................ 43
130 System............................................................................ 14
LMTS® Manuals....................................................................... 44
130 Warrior Kit...................................................................... 14
TR-700 Target Mask Sets....................................................... 45
390v6 System........................................................................ 16
TR-900 Target Overlays......................................................... 46
390v6 Linked System............................................................. 16
Multi-Use Target Overlays...................................................... 48
Sniper Training System v2..................................................... 18
Power Supplies...................................................................... 49
Mini-RETS System.................................................................. 20
Scoring Device & Accessories................................................. 49
Wireless LCCATS®................................................................... 22
System Software.................................................................... 49
Wireless Repeater Assembly.................................................. 22
LMTS® Targets........................................................................ 50
Multi-Use Target - ALT-C........................................................ 24
SafeShot® Barrels & Upper Receivers..................................... 53
Multi-Use Target - TRQC......................................................... 25
SafeShot Blanks..................................................................... 55
Multi-Use Target - MGTS-Army............................................... 26
Multi-Use Target - MGTS-Air Force......................................... 27
Multi-Use Target Optional Packages....................................... 28
M16 Blank Firing System........................................................ 31
M4 Blank Firing System.......................................................... 31
M240 Blank Firing System...................................................... 31
M249 Blank Firing System...................................................... 32
LMTS® - Equipment Training
New Equipment Training........................................................ 56
Interoperable Deployable Communications Systems
SHERPA® Expedition®............................................................. 58
SHERPA® Traveler®................................................................. 58
M16 Non-Gun Firing System................................................... 32
M9 Blank Firing System.......................................................... 32
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
3
LMTS® - Laser Marksmanship Training Systems
110 & 115 System
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
4
LMTS® - Laser Marksmanship Training Systems
110 System
[MDM1001]
The 110 System is designed to provide the shooter with visual and audible feedback while building
repetitive shooting skills and muscle memory, vital for accuracy. The core of this system is built
around the TR-700 target, a mobile, self-contained targeting component that can operate on
either AA batteries or AC power adapter. Used by recreation, law enforcement and the military,
the system takes shooters from the fundamentals of shooting all the way to combat survival
skills.
System Components
•
•
•
•
TR-700 Target
LT-100C Laser
Mask Set: Regular
LR44 batteries (Set of 4)
115 System
•
•
•
•
Allen Wrench
Power Supply
110 System Manual
Cardboard Box
[MDM1003A]
The 115 System (with Military Mask Set) uses L-3 EOTech’s in-barrel handgun laser,
the LTX-Z. The LTX-Z requires a minimum three inch barrel. The LTX-Z fits a wide
assortment of handguns, including .38, 9mm, .357, .40, .44, and .45 caliber weapons.
It allows shooters to work on their presentation from the holster in addition to use
in routine marksmanship training. This system is built around the TR-700 target.
A remote cable can be purchased separately to activate the timer and clear the hit counter on
the TR-700 at a distance.
System Components
• TR-700 Target
• LTX-Z Laser (w/ accessories)
• Mask Set: Military
TABLE OF
CONTENTS
• 115 System Manual
• Power Supply
• Cardboard Box
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
5
LMTS® - Laser Marksmanship Training Systems
115A System
[MDM1105]
The 115A System (with Regular Mask Set) uses L-3 EOTech’s internal laser, the LTX-Z. The LTX-Z
requires a minimum three inch barrel. The LTX-Z fits a wide assortment of handguns, including
.38, 9mm, .357, .40, .44, and .45 caliber weapons. It allows shooters to work on their presentation
from the holster in addition to use in routine marksmanship training. This system is built around
the TR-700 target. A remote cable can be purchased separately to activate the timer and clear
the hit counter on the TR-700 at a distance.
System Components
• TR-700 Target
• LTX-Z Laser (w/ accessories)
• Mask Set: Regular
115 Patrol Kit
• 115 System Manual
• Cardboard Box
• Power Supply
[MDM1005]
The 115 Patrol Kit allows law enforcement professionals the opportunity to conduct essential
marksmanship training utilizing their own firearm, while on the go and without the need for a
range. Contained in a compact bag, the Patrol Kit can be set up anywhere indoors or outdoors.
Through repetitive use, the Patrol Kit builds muscle memory, target acquisition skills and assists
in reinforcing the fundamentals of marksmanship such as aiming, sight alignment, breath control
and trigger control. The system can simulate various distances by adding the different target
masks or can be used for quick aim drills, timed drills and movement drills. Filling a vital need
in marksmanship training, the Patrol Kit will build and sustain perishable skills that help the law
enforcement professional when confronted with the ultimate decision.
System Components
• TR-700 Target
• Reflective Target - Mini 25M
• LTX-Z Laser (w/ accessories) • RC-260 remote cable
• Mask Set: Regular
• Power Supply
TABLE OF
CONTENTS
• (4) AA Batteries
• 115 Patrol Kit Manual
• Carrying Case: Warrior (soft)
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
6
LMTS® - Laser Marksmanship Training Systems
190 System
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
7
LMTS® - Laser Marksmanship Training Systems
190-1 System [MDM1200]
The 190-1 System is a self-contained single-shooter system that gives immediate feedback.
It supports training with any weapon that accommodates the system’s commercial laser
(rifle, pistol, shotgun). Hits on the paper targets are captured by the camera in real-time and
displayed on the shooter’s personal computer (not included). Transmitter rods in a variety of
sizes are required for the system’s commercial laser and are sold separately.
System Components
• Carrying Case
• Laser Battery
• Paper Targets (Set of 3)
• 190 Camera Bracket
• Allen Wrench
• 190 System Software
• Camera:190 System
• Laser
• 190 System Manual
190-3 System [MDM1205]
The 190-3 System is a portable personal marksmanship training system that allows shooters
to become more proficient with their own firearms from any computer-accessible location.
The 190-3 System is designed for use with a handgun which will accept the LTX-Z in-barrel
laser. The LTX-Z laser has inserts which support use with .38, 9mm, .357, .40, .44 and .45
caliber handguns. The LTX-Z requires a minimum 3 inch barrel. By inserting the laser into
your weapon and shooting at the targets, the hit detector sends immediate feedback to your
computer via a USB connection. (Computer not included)
System Components
TABLE OF
CONTENTS
• Carrying Case
• LTX-Z Laser
• 190 Camera Bracket
• Paper Targets (Set of 3)
• Camera:190 System
• 190 System Software
• 190 System Manual
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
8
LMTS® - Laser Marksmanship Training Systems
360/460 System
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
9
LMTS® - Laser Marksmanship Training Systems
360 System – 1 Target [MDM1311T]
The 360-1 System provides a scaled 1-lane range capability that can be
controlled by one scoring device and one instructor. Built around the TR900T target, hits are displayed live in real-time during the firing session, and
the target can be enlarged to full screen viewing by a click of the mouse. The
system is capable of timed sessions. It supports training with any weapon
that accommodates the system’s commercial laser (rifle, pistol, shotgun).
The system can be disassembled and packed in the included Pelican® case
for storage and transportation and can also be configured with up to 10
targets.
Additional configurations for the system:
360 System – 2 [MDM1302T]: Scaled 2-lane range capability.
360 System – 3 [MDM1303T]: Scaled 3-lane range capability.
360 System – 4
[MDM1304T]: Scaled 4-lane range capability.
360 System – 5 [MDM1305T]: Scaled 5-lane range capability.
360 System – 6
[MDM1306T]: Scaled 6-lane range capability.
360 System – 7
[MDM1307T]: Scaled 7-lane range capability.
360 System – 8
[MDM1308T]: Scaled 8-lane range capability.
360 System – 9
[MDM1309T]: Scaled 9-lane range capability.
360 System – 10
[MDM1310T]: Scaled 10-lane range capability.
System Components
•
•
•
•
•
TABLE OF
CONTENTS
Component amounts vary with system configuration.
TR-900T Target
Laser
Laser Battery
Control Box USB & Cable
Daisy Chain Cable
•
•
•
•
•
360/460 Long Cable (36 yards)
Power Supply: 110V/240V
360 System Software
360 System Manual
Carrying Case
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
10
LMTS® - Laser Marksmanship Training Systems
365 System – 1 Target
[MDM1401T]
The 365 System (w/ LTX-Z) is a one-lane range system that can be controlled
by one scoring device and one instructor. All data can be saved, including
session time, score and dispersion and each shot on the target is numbered and
data is displayed by that numbered shot. The LTX-Z laser requires a minimum
three inch barrel and fits a wide assortment of handguns, including .38, 9mm,
.357, .40, .44, and .45 caliber weapons. It allows shooters to work on their
presentation from the holster, in addition to use in routine marksmanship
training. The system can be disassembled and packed in the included Pelican®
case for storage and transportation and can be configured with up to 10 targets
(see additional configurations).
Additional configurations for the system:
365
365
365
365
365
365
365
365
365
System
System
System
System
System
System
System
System
System
–
–
–
–
–
–
–
–
–
2 [MDM1402T]: Scaled 2-lane range capability.
3 [MDM1403T]: Scaled 3-lane range capability.
4 [MDM1404T]: Scaled 4-lane range capability.
5 [MDM1405T]: Scaled 5-lane range capability.
6 [MDM1406T]: Scaled 6-lane range capability.
7 [MDM1407T]: Scaled 7-lane range capability.
8 [MDM1408T]: Scaled 8-lane range capability.
9 [MDM1409T]: Scaled 9-lane range capability.
10 [MDM1410T]: Scaled 10-lane range capability.
System Components
•
•
•
•
•
TABLE OF
CONTENTS
Component amounts vary with system configuration.
TR-900T Target
LTX-Z Laser
Power Supply: 110V/240V
Control Box USB & Cable
Daisy Chain Cable
•
•
•
•
360/460 Long Cable (36 yards)
365 System Software
365 System Manual
Carrying Case
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
11
LMTS® - Laser Marksmanship Training Systems
460 System – 1 Target
[MDM1611T]
The 460-1 System provides a scaled 1-lane range capability that can be
controlled by one scoring device and one instructor. Built around the TR-900T
target, hits are displayed live in real-time during the timed firing session. It
supports training with any weapons that accommodate the MP400B laser
(rifle, pistol, shotgun). The software is capable of storing shooter data (name,
rank, unit, etc.) for on-demand recall, and performance data (shot sequence,
location, time, center of the shot group, and dispersion) for each shooter.
The system can be disassembled and packed in the included Pelican® case for
storage and transportation and can be configured with up to 10 targets (see
additional configurations).
Additional configurations for the system:
460
460
460
460
460
460
460
460
460
System
System
System
System
System
System
System
System
System
–
–
–
–
–
–
–
–
–
2 [MDM1602T]: Scaled 2-lane range capability.
3 [MDM1603T]: Scaled 3-lane range capability.
4 [MDM1604T]: Scaled 4-lane range capability.
5 [MDM1605T]: Scaled 5-lane range capability.
6 [MDM1606T]: Scaled 6-lane range capability.
7 [MDM1607T]: Scaled 7-lane range capability.
8 [MDM1608T]: Scaled 8-lane range capability.
9 [MDM1609T]: Scaled 9-lane range capability.
10 [MDM1610T]: Scaled 10-lane range capability.
System Components
•
•
•
•
•
•
TABLE OF
CONTENTS
Component amounts vary with system configuration.
TR-900T Target
MP-400B Laser
AA Battery
LTA 380-2 Transmitter Rod
LTA 556C Transmitter Rod
Power Supply: 110V/240V
•
•
•
•
•
•
Control Box USB & Cable
Daisy Chain Cable
360/460 Long Cable (36 yards)
TR-900T Target Overlay: Standard
TR-900T Target Overlays: Army Pack
460 System Software
• Allen Wrench
• 460 System Manual
• Control Box USB & Cable
• Carrying Case
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
12
LMTS® - Laser Marksmanship Training Systems
130 System
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
13
LMTS® - Laser Marksmanship Training Systems
130 System
[MDM1502]
The 130 System uses L-3 EOTech’s MP400B Laser Transmitter and enables marksmanship training to
be conducted indoors or outdoors. It provides the shooter with both instant visual hit counter and
audible feedback. This system is built around the TR-700 target which operates on AA batteries or with
an included power supply. The system comes with laser transmitter rods for use with most 5.56mm
rifles and 9mm pistols (requires a minimum 2 inch barrel). A remote cable can be purchased separately
to activate the timer and clear the hit counter on the TR-700 at a distance. The system can also be
configured with 7 or 10 targets (see additional configurations).
Additional configurations for the system:
130 System – 10 [MDM1503]: 10 target capability.
130 System – 7 [MDM1504]: 7 target capability.
System Components
•
•
•
•
TR-700 Target
MP-400B Laser
LTA 380-2 Rod
LTA 556 Rod
Component amounts vary with system configuration.
• AA Battery
• Allen Wrench
• Power Supply: 110V/240V
130-1E Warrior Kit
• Mask Set: Military
• 130 System Manual
• Carrying Case
[MDM1508A]
The 130-1E Warrior Kit, built around the TR-700 target, provides the shooter with instant visual and audible
feedback. The 130-1E Warrior Kit gives the shooter a portable, durable marksmanship training system.
This self-contained marksmanship training system allows the user to operate the system anywhere without
electrical power using standard AA batteries both indoors and outdoors or is powered through the included
110V power supply. The standard configuration allows the shooter to practice a variety of weapon-handling
skills with most 5.56 cal. rifles and 9mm pistols (requires a minimum 2 inch barrel).
Additional configurations for the system:
130-10E Warrior Kit [MDM1509]: 10 target capability.
130-4E Warrior Kit [MDM1510A]: 4 target capability.
130-7E Warrior Kit [MDM1513A]: 7 target capability.
130-6E Warrior Kit [MDM1514A]: 6 target capability.
*Hard Pelican® case inlcuded with multiple target system configurations
System Components
•
•
•
•
•
TABLE OF
CONTENTS
TR-700 Target
MP-400B Laser
LTA 380-2 Rod
LTA 556 Rod
RC-260 Remote Cable
Component amounts vary with system configuration.
•
•
•
•
AA Battery
Allen Wrench
Power Supply: 110V/240V
Mask Set: Military
•
•
•
•
Mini Reflective Target
PL-10 Lubricant
Carrying Case: Warrior (soft bag)
130 System Manual
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
14
LMTS® - Laser Marksmanship Training Systems
390v6 System
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
15
LMTS® - Laser Marksmanship Training Systems
390v6 System
From the fundamentals to judgmental situations, the 390v6 System provides a full range
of training that prepares your team for most encounters they may face. A video training
simulator that provides judgmental shoot/no shoot scenarios, the 390v6 System is now
equipped with branching capabilities for select scenarios and new skill building exercises as
well as paper target engagement.
Users can now choose from a number of branching scenarios and also have the option to
purchase a software license that unlocks a feature to create their own branching scenarios.
Trainees use their department-issued firearms, while instructors review shot location in
addition to other session details. Portable and small enough to fit in the back of a cruiser,
it can be set up in a training area of limited size. Adding our SafeShot® barrels and blanks
provide recoil to complete your training in a more realistic manner.
System Configurations:
390v6 System: A
[MDM1718A]: Includes the Transtar II & E-Type Silhouette Paper Targets.
390v6 System: B
[MDM1718B]: Includes the Modified QIT (Scaled) & E-Type Silhouette
(Scaled) Paper Targets.
System Components
390v6 System: A [MDM1718A]
•
•
•
•
•
Video Projector
Scoring Device (Laptop)
LTX-Z Laser
Laser Detection Device
Small Geared Gead
•
•
•
•
•
Power Strip
Crossover Ethernet Cable
390 Tripod
390 Scenario Library: 5 CD’s
390 Scenario Library: DVD
•
•
•
•
•
390 Software CD
390 Sound System
390 System Manual
Target Tube
390 Carrying Case
390 Linked System
The 390 Linked System expands the full-sized paper target engagement exercise section of the 390 System, a video scenario and fundamental skills
training system. It adds one additional firing lane to a 390 System with the capability of expanding up to 8 firing lanes that are centrally linked to a single
scoring device. Up to 8 shooters may engage individual targets at the same time which allows instructors more flexibility when training larger groups.
The trainees have the opportunity to gain valuable experience on specific department/service full-sized paper targets before moving to actual live fire
qualification. Depending upon the number of Linked Lane Kits added, additional paper targets may need to be purchased. (Note: For owners of 390v5 or
390v6 Systems, only the Linked Lane Kit and a Linked Communication Kit are required to support the system)
System Components
• 390v6 System (MDM1718A)
TABLE OF
CONTENTS
(See LMTS® Components & Accessories Section for description of LMTS® kits)
• Linked Lane Kit
(MDM1715) Up to 7 lane kits may be added.
• Linked Communication Kit (MDM1714)
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
16
LMTS® - Laser Marksmanship Training Systems
Sniper Training System v2
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
17
LMTS® - Laser Marksmanship Training Systems
Sniper Training System V2
[MDM1751]
The Sniper Training System V2 (STSv2) is a self-contained, lightweight, low cube
(1 case) system. It is easily transported and set-up in a field environment
requiring only 25 meters training distance, electrical power and no special
facilities. Snipers train with their own standard issue rifles and optical sights.
The system requires no modification to the sniper rifle and it does not interfere
with normal rifle function. Firing is simulated by an external rifle-mounted
Class IIIA laser. The trainer receives instant feedback via the instructor station
screen. The STSv2 System incorporates a ballistics program that adjusts
the point of impact for each rifle and ammunition combination based upon
environmental conditions, such as wind, temperature, humidity, slope, altitude,
and latitude. Ballistic variables are entered into the training session by a trainer
to challenge the shooter to make necessary sight adjustments on their rifle’s
sights to achieve a target hit. The system supports both custom rifle and bullet
ballistics, as well as standard sniper rifle and bullet ballistics. Targets are scaled
for range estimation at clearly specified training distances (by mil-dot or other
reticle). Target presentations as seen through the sniper’s sighting system
correspond to the scoring device’s display in scale and color. The STSv2 System
supports comprehensive after action reviews with a full feature “trace mode”
and selectable mil-dot reticle or minute of angle (MOA) grid overlays for shot
placement analysis.
System Components
• STSv2 Laser Detection Device
• Scoring Device (Laptop)
• STSv2 Laser Detection Device Mount
• STSv2 Target Set
• STSv2 E-Remote Box
• STSv2 Sun Shade
• 30 Meter Cable
• Power Strip
• MP400STS Laser with Cable & Bracket
• STSv2 System Manual
• Barrel Shims (Set of 3)
• STSv2 System Software
• STS Laser Vibration Screw
• STSv2 Carrying Case
• E-Local Box
• STS Accessory Case
• Power Cord
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
18
LMTS® - Laser Marksmanship Training Systems
Mini-RETS Target Set
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
19
LMTS® - Laser Marksmanship Training Systems
Mini-RETS 7-Target Set w/LRETS box
[MDM1811]
The Mini-RETS 7-Target Set is a wired 7-target system that can be scaled to
replicate a full scale field range from 15 or 25 meters. Targets are controlled by
a scoring device (sold separately). Built around the TR-700 target, targets are
raised on lifter units according to a timed scenario preset by the user or run
on standard default settings. Target hits drop the target and are automatically
scored, and the system produces a scorecard for each shooter. The system can
be easily assembled and disassembled and may be linked with other Mini-RETS
for up to 3 lanes of 7 targets. Included with this system are scaled E-type masks
that present standard target silhouettes at appropriate scaled ranges.
System Components
• (7) TR700 Targets
• (7) 11 Meter Cables
• (7) Lifters
• (7) Mask Sets: Military
• Basic Computer Control Interface Unit
• LRETS System Software
• BCCIU cable
• Mini-RETS System Manual
• Vehicle Power Cord
• Power Supply
• BCCIU Power Cord
• Mini-RETS 2 Lifter Case
• LRETS Interface Box
• Mini-RETS 5 Lifter Case
• (7) Lifter Cables
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
20
LMTS® - Laser Marksmanship Training Systems
Wireless LCCATS®
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
21
LMTS® - Laser Marksmanship Training Systems
Wireless LCCATS®
[MDM1851]
The Wireless Laser Collective Combat Advanced Training System (Wireless LCCATS®) is
designed for training in environments where it is difficult or impossible to use wired targets.
The targets and lifters use 12v rechargeable batteries as a power source. The Wireless LCCATS
targets collect and store laser hits within any of 5 different zones on the target and have
time stamps to allow the software to display hits on the screen in real-time which are sent
to an instructor control station via a wireless interface Box. Maximum line-of-sight operating
distances from wireless access point are 300 meters to the Wireless interface box, and 200
meters to instructor control station. Wireless repeaters (sold separately) can extend ranges
by a maximum line-of-sight operating distance of up to 300 meters or assist in attaining lineof-sight to the wireless access point in congested areas.
System Components
•
•
•
•
•
•
•
•
•
F-Type Target Case
(2) E-Type Target Cases
(3) E & F-Type Lifter Cases
E-Type Lifter & CCIU Case
Wireless LCCATS Case
(4) E-Type Targets
(3) F-Type Targets
(4) E-Type Lifters
(3) F-Type Lifters
•
•
•
•
•
•
•
•
(8) Wireless Batteries
(8) Battery Chargers
(8) Battery Charger Cables
(7) Target Adapter Cables
(7) Lifter Adapter Cables
(2) Power Strips
WAP/Repeater Cable
(7) Wireless Interface Boxes
Wireless Repeater Assembly
•
•
•
•
•
•
•
Wireless Access Point
Scoring Device (Laptop)
(7) 5A Fuses (Lifters)
(8) 2A Fuses (WIB/WAP)
Wireless LCCATS Manual
Wireless LCCATS Software
Reflective Zero Target
[MDM1852]
The Wireless Repeater Assembly is designed to extend the range of wireless LCCATS targets a
maximum line-of-site operating distance of up to 300 meters. The wireless repeater can also
be used to extend the range for a target placed where line-of-sight is lost to the wireless access
point (WAP).
System Components
• Wireless Repeater
• Wireless Battery Charger Cable
• Wireless Battery
• Wireless WAP/Repeater Cable
• Wireless Battery Charger
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
22
LMTS® - Laser Marksmanship Training Systems
Multi-Use Target Systems
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
23
LMTS® - Laser Marksmanship Training Systems
MUTAR - ALT-C System
[MDM2102]
The MUTAR - Alt-C is designed for individuals interested in providing long distance shooting
practice (50 to 300 meters) in short training distances (15 to 25 meters). The Multi-Use Target
with Alternate Course C overlay (MUTAR – ALT C) is an electronic replica of the actual paper
Scaled Target Alternate C Course. Up to ten targets may be controlled by one scoring device, with
software providing instant hit feedback and scoring. Included are 15 and 25 meter scaled target
faces with necessary cables and power supply packed into its own durable case. The portability of
the system allows for an authentic range experience in an assembly hall, classroom, or outdoors
without any special facility requirements. The software is capable of saving shooter, session, and
performance data for later recall for review, display, data transfer, or printing to determine the
individual’s progress. The multi-use target gives the user the option of purchasing not only the
Advanced Alt-C overlays (included with the MUTAR Alt-C), but also the Machine Gun Training
System package to use with the multi-use target.
System Components
(1) Multi-Use Target Package:
• Multi-Use Target
• MUTAR Power Supply
• 30M Control Cable
• 3M Linking Cable
• MUTAR Case Foam
• MUTAR Overlay Bag
(1) MUTAR Alt-C Overlay Package:
(1) Rifle Laser Package:
• MUTAR 15M Alt-C Overlay
• MP400B Laser
• MUTAR 25M Alt-C Overlay
• AA Battery
• MUTAR - Alt-C System Software
• M16 Flex Mount
• MUTAR - Alt-C Manual
Bracket Assembly
Optional packages are available to add capability to your MUTAR System:
To Add a U.S. Air Force Tactical Rifle Qualification Course (TRQC):
MUTAR: TRQC Overlay Package
[MDP1002]
To Add Machine Gun Training for U.S. Army: (MGTS-AR)
MUTAR: MGTS-AR Overlay Package
MG Laser Package [MDP0002]
[MDP2001]
To Add Machine Gun Training for U.S. Air Force: (MGTS-AF)
MUTAR: MGTS-AF Overlay Package
MG Laser Package [MDP0002]
TABLE OF
CONTENTS
[MDP2003]
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
24
LMTS® - Laser Marksmanship Training Systems
MUTAR - TRQC
[MDM2103]
The MUTAR – TRQC is designed for individuals interested in providing long distance shooting
practice (50 to 300 meters) in short training distances (15 to 25 meters). The Multi-Use Target
with Tactical Rifle Qualification Course overlay (MUTAR – TRQC) is an electronic replica of the
actual scaled U.S. Air Force Tactical Rifle Qualification Course (TRQC). Up to ten targets may be
controlled by one scoring device, with software providing instant hit feedback and scoring. The
portability of the system allows for an authentic range experience in an assembly hall, classroom,
or outdoors without any special facility requirements. Included are two sets of 15 and 25 meter
scaled target faces with necessary cables and power supply packed into its own durable case. The
multi-use target gives the user the option of purchasing not only the TRQC overlays, but also the
Machine Gun Training Systems for the U.S. Army and U.S. Air Force.
System Components
(1) Multi-Use Target Package:
• Multi-Use Target
• MUTAR Power Supply
• 30M Control Cable
• 3M Linking Cable
• MUTAR Case Foam
• MUTAR Overlay Bag
(1) MUTAR TRQC Overlay Package:
• MUTAR 15M Timed Fire Overlay
• MUTAR 25M Timed Fire Overlay
• MUTAR 15M Slow Fire Overlay
• MUTAR 15M Slow Fire Overlay
• MUTAR - TRQC System Software
• MUTAR - TRQC Manual
(1) Rifle Laser Package:
• MP400B Laser
• AA Battery
• M16 Flex Mount
Bracket Assembly
Optional packages are available to add capability to your MUTAR System:
To Add U.S. Army Scaled Target Alternate Course (Alt-C):
MUTAR: ALT-C Overlay Package
[MDP1001]
To Add Machine Gun Training for U.S. Army (MGTS-AR):
MUTAR: MGTS-AR Overlay Package
MG Laser Package [MDP0002]
[MDP2001]
To Add Machine Gun Training for U.S. Air Force (MGTS-AF):
MUTAR: MGTS-AF Overlay Package
MG Laser Package [MDP0002]
TABLE OF
CONTENTS
[MDP2003]
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
25
LMTS® - Laser Marksmanship Training Systems
MUTAR - MGTS-AR (Army)
[MDM2121]
The Multi-Use Target – MGTS-AR is an electronic replica of the actual paper 10 meter machine gun
target. Up to ten targets may be controlled by one scoring device, with software providing instant
hit feedback. Included with each target is the machine gun laser with barrel mounting brackets
for M249 and M240 machine guns, necessary cables, and power supply, all packed into its own
durable case. This makes transportation and set-up both simple and fast.
System Components
(1) Multi-Use Target Package:
• Multi-Use Target
• MUTAR Power Supply
• 30M Control Cable
• 3M Linking Cable
• MUTAR Case foam
• MUTAR Overlay Bag
(1) MGTS-AR Overlay Package:
• MUTAR 10M MG Overlay
• MUTAR - MGTS-AR Software
• MUTAR - MGTS-AR Manual
(1) MG Laser Package:
• MP400MG Laser
• M249 Bracket
• M240 Bracket
• AA Battery
• Laser Vibration Screw
Optional packages are available to add capability to your MUTAR System:
To Add U.S. Army Scaled Target Alternate Course (Alt-C):
MUTAR: ALT-C Overlay Package
Rifle Laser Package [MDP0003]
[MDP1001]
To Add U.S. Air Force Tactical Rifle Qualification Course (TRQC):
MUTAR: TRQC Overlay Package
Rifle Laser Package [MDP0003]
[MDP1002]
To Add Machine Gun Training for U.S. Air Force (MGTS-AF):
MUTAR: MGTS-AF Software Package
TABLE OF
CONTENTS
[MDP2004]
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
26
LMTS® - Laser Marksmanship Training Systems
MUTAR - MGTS-AF (Air Force) [MDM2122]
Multi-Use Target – MGTS-AF is an electronic replica of the actual paper 10 meter machine gun
target. Up to ten targets may be controlled by one scoring device, with software providing instant
hit feedback. Included with each target is the machine gun laser with barrel mounting brackets
for M249 and M240 machine guns, necessary cables, and power supply, all packed into its own
durable case. This makes transportation and set-up both simple and fast.
System Components
(1) Multi-Use Target Package:
• Multi-Use Target
• MUTAR Power Supply
• 30M Control Cable
• 3M Linking Cable
• MUTAR Case Foam
• MUTAR Overlay Bag
(1) MGTS-AF Overlay Package:
(1) MG Laser Package:
• MUTAR 10M MG Overlay
• MP400MG Laser
• MUTAR - MGTS-AF Software
• M249 Bracket
• MUTAR - MGTS-AF Manual
• M240 Bracket
• AA Battery
• Laser Vibration Screw
Optional packages are available to add capability to your MUTAR System:
To Add U.S. Army Scaled Target Alternate Course (Alt-C):
MUTAR: ALT-C Overlay Package
Rifle Laser Package [MDP0003]
[MDP1001]
To Add a U.S. Air Force Tactical Rifle Qualification Course (TRQC):
MUTAR: TRQC Overlay Package
Rifle Laser Package [MDP0003]
[MDP1002]
To Add Machine Gun Training for U.S. Air Force (MGTS-AF):
MUTAR: MGTS-AF Software Package
TABLE OF
CONTENTS
[MDP2002]
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
27
LMTS® - Laser Marksmanship Training Systems
Multi-Use Target Package
[MDP0001]
The Multi-Use Target supports both machine gun and Alt-C training through use of different overlays
and program software employed on the same base target. This allows the user flexibility and
potentially greater efficiency in configuring their LMTS® training devices to meet their requirements
for these two systems. The Multi-Use Target requires a scoring device for operation.
System Components
• Multi-Use Target
• 30 Meter Control Cable
MG Laser Package
• 3 Meter Linking Cable
• Power Supply
• MUTAR Case Foam
• MUTAR Overlay Bag
[MDP0002]
The MG Laser Package is needed when converting a MUTAR: Alt-C System (MDM2102) or a
MUTAR: TRQC (MDM2103) to either MUTAR: MGTS Systems (U.S. Army or U.S. Air Force).
A separate MUTAR: MGTS Overlay Package is also required for a full conversion.
System Components
• MP400MG Laser
• M240 Bracket
• M249 Bracket
• AA Battery
Rifle Laser Package
• Laser Vibration Screw
[MDP0003]
The Rifle Laser Package is needed when converting either MUTAR: MGTS System to a MUTAR:
Alt-C (MDM2102) or MUTAR: TRQC (MDM2103). A separate MUTAR: Alt-C or MUTAR: TRQC
Overlay Package is also required for a full conversion. The Rifle Laser Package is for use with the
M16/M4 rifle.
System Components
• MP400B Laser
TABLE OF
CONTENTS
• AA Battery
• M16 Flex Mount Bracket Assembly
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
28
LMTS® - Laser Marksmanship Training Systems
MUTAR: Alt-C Overlay Package
[MDP1001]
The MUTAR: Alt-C Overlay Package is needed when converting either MUTAR: MGTS Systems, or
the MUTAR: TRQC (MDM2103) System, to the MUTAR: Alt-C System (MDM2102). If the user is
converting a MUTAR: MGTS System, the Rifle Laser Package (MDP0003) is also required.
System Components
• MUTAR 15M Alt-C Overlay
• MUTAR 25M Alt-C Overlay
• MUTAR - Alt-C Software
• MUTAR - Alt-C Manual
MUTAR: TRQC Overlay Package
[MDP1002]
The MUTAR: TRQC Overlay Package is needed when converting either MUTAR: MGTS Systems,
or the MUTAR: Alt-C (MDM2102) System, to the MUTAR: TRQC (MDM2103) System. If the user
is converting a MUTAR: MGTS System, the Rifle Laser Package is also required.
System Components
• MUTAR 15M Timed Fire Overlay • MUTAR 15M Slow Fire Overlay
• MUTAR 25M Timed Fire Overlay • MUTAR 25M Slow Fire Overlay
MUTAR: MGTS-AR (Army) Overlay Package
• MUTAR - TRQC Software
• MUTAR - TRQC Manual
[MDP2001]
The MUTAR: MGTS – AR Overlay Package is needed when converting a MUTAR: Alt-C (MDM2102) or
MUTAR: TRQC (MDM2103) System to a MUTAR: MGTS – AR. The MG Laser Package (MDP0002) is
also required for a full conversion.
System Components
• MUTAR 10M MG Overlay
TABLE OF
CONTENTS
• MUTAR - MGTS-AR Software
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
• MUTAR - MGTS-AR Manual
29
LMTS® - Laser Marksmanship Training Systems
MUTAR: MGTS-AR (Army) Software Package
[MDP2002]
The MUTAR: MGTS – AR Software Package is needed when converting a
MUTAR: MGTS – AF to a MUTAR: MGTS – AR.
System Components
• MUTAR - MGTS-AR Software
• MUTAR - MGTS-AR Manual
MUTAR: MGTS-AF (Air Force) Overlay Package
[MDP2003]
The MUTAR: MGTS – AF Overlay Package is needed when converting a MUTAR: Alt-C (MDM2102) or
MUTAR: TRQC (MDM2103) System to a MUTAR: MGTS – AF. The MG Laser Package (MDP0002) is also
required for a full conversion.
System Components
• MUTAR 10M MG Overlay
• MUTAR - MGTS-AF Software
• MUTAR - MGTS-AF Manual
MUTAR: MGTS-AF (Air Force) Software Package [MDP2004]
The MUTAR: MGTS–AF Software Package is needed when converting a
MUTAR: MGTS–AR to a MUTAR: MGTS–AF.
System Components
• MUTAR - MGTS-AF Software
TABLE OF
CONTENTS
• MUTAR - MGTS-AF Manual
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
30
LMTS® - Laser Marksmanship Training Systems
M16 Blank Firing System
M4 Blank Firing System
M240 Blank Firing System
[MDM1901]
[MDM1902]
[MDM1903]
SafeShot M16 Upper Receivers bring added
realism and safety to marksmanship, closequarter and tactical training. By replacing
the upper receiver of the weapon with the
SafeShot M16 Upper Receiver, without any
other modification it allows the shooter to use
their own firearm while maintaining original
trigger pull to duplicate live-fire function.
Combined with the LMTS® targets, the true
point-of-impact of the laser beam provides
recordable accuracy that takes blank-fire
to a new level of realism. Chambering only
patented 5.56 SafeShot lead-free blanks,
they permit training whether indoor or in
the field, while providing the recoil, sound,
and smell of live-fire - “everything but the
bullet.” The SafeShot M16 upper receiver is
made of blue-anodized metal allowing for
immediate recognition as a training unit. The
one-piece barrel prevents muzzle discharge
and will not affect the lower receiver. This is
an M16A2 configuration.
SafeShot M4 Upper Receivers bring added
realism and safety to marksmanship, closequarter and tactical training. By replacing
the upper receiver of the weapon with the
SafeShot M4 Upper Receiver, without any
other modification it allows the shooter to use
their own firearm while maintaining original
trigger pull to duplicate live-fire function.
Combined with LMTS targets, the true
point-of-impact of the laser beam provides
recordable accuracy that takes blank-fire
to a new level of realism. Chambering only
patented 5.56 SafeShot lead-free blanks,
they permit training whether indoor or in
the field, while providing the recoil, sound,
and smell of live-fire - “everything but the
bullet.” The SafeShot M4 upper receiver is
made of blue-anodized metal allowing for
immediate recognition as a training unit.
The one-piece barrel prevents muzzle
discharge and will not affect the lower
receiver.
The SafeShot® M240 barrel brings added
realism and safety to marksmanship, closequarter and tactical training. Without any other
modification except replacing barrels, and
no affect to the lower receiver, the one piece
training barrel allows the shooter to use their
own firearm to duplicate live-fire function with
no muzzle discharge. Combined with LMTS®
targets, the true point-of-impact of the laser
beam provides recordable accuracy that takes
blank-fire to a new level of realism. The M240
BFS will only chamber patented 7.62 SafeShot
lead-free blanks for ammunition of the same
caliber. The M240 BFS permits training whether
indoor or in the field, while providing the recoil,
sound, and smell of live-fire - “everything but
the bullet”.
®
System Components
• M240 SafeShot Barrel
• Bracket: M240 w/Laser Vibration Screw
System Components
System Components
• Laser: MP-400MG
• SafeShot M16 Upper Receiver
• SafeShot M4 Upper Receiver
• AA Battery
• MP400B Bracket-Mounted Laser Assembly
• MP400B Bracket-Mounted Laser Assembly
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
31
LMTS® - Laser Marksmanship Training Systems
M249 Blank Firing System
M16 Non-Gun Firing System
M9 Barrel Blank Firing System
[MDM1904]
[MDM1906]
[MDM1920]
SafeShot M249 blank firing systems bring
added realism and safety to marksmanship,
close-quarter and tactical training. Without any
other modification except replacing barrels,
and no affect to the lower receiver, the one
piece training barrel allows the shooter to use
their own firearm to duplicate live-fire function
with no muzzle discharge. Combined with LMTS
targets, the true point-of-impact of the laser
beam provides recordable accuracy that takes
blank-fire to a new level of realism. Chambering
only patented linked 5.56 SafeShot lead-free
blanks, they permit training whether indoor or
in the field, while providing the recoil, sound,
and smell of live-fire - “everything but the
bullet.” The flash suppressor of the SafeShot
M249 barrel is painted blue allowing for
immediate recognition as a training unit.
The M16 non-gun firing system is a commercial
airsoft rifle with the addition of the M16
carrying handle and an attached M16/M4
bracket-mounted MP-400B laser. The MP-400B
lasers are equipped with a vibration sensor to
specifically detect the hammer fall (strike of
hammer) to activate the laser and simulate the
actual bullet fired by the firearm.
The SafeShot® M9 Blank Firing System
combines repetitive blank-fire operation,
replicated recoil and recovery with actual
down-range targeting capability. The M9
SafeShot barrel replaces the live-fire barrel of
the M9 pistol with simple field-stripping and is
ready for use with the lead-free SafeShot 9mm
blank. The LT-300 laser screws into the muzzle
of the barrel and projects a laser dot with each
shot. It may be used as a marksmanship and
training tool with the TR-700, Mini-RETS, 390
System or in a tactical scenario with Wired
or Wireless LCCATS®. The combination of
barrel and laser is completely holsterable and
contains no tethers or attachments of any
kind.
M249 SafeShot Barrel
Laser: MP-400MG
Bracket: M249 with Sight Clamp
AA Battery
TABLE OF
CONTENTS
•
•
•
•
•
•
M16 Non-Gun w/Magazine
Battery Pack
Charger
M16/M4 Bracketed MP-400B Laser
AA Battery
Carry Handle
System Components
• M9 Beretta® SafeShot Barrel
System Components
•
•
•
•
System Components
• LT-300 Laser w/ Spring
• LT-300 Battery
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
32
LMTS® - Components & Accessories
Laser Marksmanship Training System Kits
LMTS® Accessory Kit
[MDM2003]
The LMTS Accessory Kit allows more effective and immediate use of all LMTS products.
®
System Components
•
•
•
•
•
Accessory Kit Case
LAD 5.56mm w/ Case
12V DC to AC Inverter
100’ Extension Cord
(3) 50’ Extension Cords
• (6) 25’ Extension Cords
• (3) Power Strips
• PL-10 Lubricant
Wireless Upgrade Kit
[MDM1861]
The Wireless Upgrade Kit is designed to be added to the Wired LCCATS configuration to
convert wired to wireless LCCATS.*
System Components
•
•
•
•
•
Wireless LCCATS Case
(7) Wireless Interface Boxes
Wireless Access Point
(8) Wireless Batteries
(8) Battery Chargers
•
•
•
•
•
(8) Battery Charger Cables
(7) Lifter Adapter Cables
(7) Target Adapter Cables
WAP/Repeater Cable
(2) Power Strips
• Wireless LCCATS Software
• Wireless LCCATS Manual
• (8) 2A Fuses (WIB/WAP)
*Wireless card sold separately, as required.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
33
LMTS® - Components & Accessories
Laser Marksmanship Training System Kits
390 Linked
Communication Kit[MDM1714]
390 Linked
Lane Kit [MDM1715]
390 Linked
Conversion Kit
The 390 Linked Communication Kit is
used with the 390v5 or 390v6 System
when two (2) or more linked papertarget lanes are required for training.
One communication kit is designed to
support up to eight (8) simulated firing
lanes.
The 390 Linked Lane Kit is used with the
390v5 or 390v6 System when two (2)
or more linked paper-target lanes are
required for training. Up to seven (7) lane
kits can be added to the 390v6 System
to create a total of eight (8) simulated
firing lanes controlled by one instructor,
which gives more shooters the ability
to train in a shorter time. Paper targets
must be purchased separately (see pg.
53-54).
The 390 Linked Conversion Kit contains
the components necessary to link an
additional 390 Advanced System as one
of the lanes of a 390 Advanced System
- Linked. The 390 Advanced System –
Linked can be built to support eight total
simulated firing lanes.
System Components
• 390 Linked Network Switch
• Managed Switch Power Supply
[MDM1716]
System Components
• 390 Linked PoE Terminal
• 390 Linking Power/Data Cable
• 390 Linked PoE Terminal
System Components
• 25’ Camera Network Cable
• 50’ Extension Cord
• LTX-Z Laser
• Cardboard Carrying Case
• 140’ Control Network Cable
• 25’ Camera Network Cable
• 390 Linking Power/Data Cable
• Communication Kit Manual
• Communication Kit Software Cd
• Cardboard Carrying Case
TABLE OF
CONTENTS
• Laser Detection Device
• 390 Linked PoE Terminal
• 390 Linking Power/Data Cable
• 25’ Camera Network Cable
• Tripod
• Cardboard Carrying Case
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
34
LMTS® - Components & Accessories
Carrying Cases
Carrying Case 110 System [MD1503]
The 110 carrying case is used for carrying a complete 110/115 System
including accessories. The 110 carrying case is not a standard component
of the 110 System but is a component of the 130 System. For the 110
System, the 110 carry case is a separately purchased accessory.
Carrying Case for the 390v6 System
[MD1507]
Pelican® 1650 case with custom foam insert to hold the components of
Carrying Case
for 130-10
[MD1508]
the 390v6 System.
Carrying Case for 10 TR700 Targets
[MD1508]
This Pelican 1650 case is used with the 130-10 System.
®
Carrying Case 130-7 System
[MD1509]
This Pelican 1650 case is used to hold the 130-7 System.
®
Carrying Case for TR-900 Targets
[MD1511T]
This Pelican® 1650 case is used with the 460 System. It is also the
carrying case used to carry additional TR-900 targets for the 360-1 to
360-10 and 365-1 to 365-10 Systems.
Carrying Case Accessory Kit
[MD1512]
This carrying case is used to hold and store the LMTS® Accessory Kit.
Carrying Case Warrior (soft)
[MD1514]
This soft case is a used to transport the 130-1E Warrior Kit.
Carrying Case for TR-900 Targets
[MD1511T]
Carrying Case RETS 2-Lifter
[MD1515]
This Pelican 1650 case is part of the Mini-RETS 7-Target System.
®
Carrying Case Warrior - Soft
[MD1514]
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
35
LMTS® - Components & Accessories
Carrying Cases
Carrying Case RETS 5-Lifter
E Target Case
[MD1517]
This Pelican 1650 case is part of the Mini-RETS 7-Target System.
®
Carrying Case for LAD
[MD1518]
This carrying case holds the Laser Alignment Device and 5.56mm
and 7.62mm Laser Transmitter Assemblies (LTA).
Carrying Case 130-4E
[MD1528]
This Pelican® 1600 case is equipped to carry four (4) 130-1E soft
bag Warrior Kits, including accessories.
Carrying Case for 130-7E Warrior Kit
[MD1535]
This Pelican 1650 case is equipped to carry seven (7) 130-1E soft
bag Warrior Kits, including accessories.
®
M-16 Non-Gun (5) Rifle Case
[MD1546]
This Pelican® 1780 case is equipped to carry two (2) E-Type
LCCATS® targets. It is a component of both the Wired and Wireless LCCATS®.
F Target Case
[MD1547]
This Pelican 1780 case is equipped to carry three (3) F-Type
LCCATS® targets included in a Wired or Wireless LCCATS®.
®
STSv2 Accessory Case
[MD1552]
The STSv2 Accessory Case is a component of the STSv2. It is a
Pelican® 1200 case used to store bracket shims, STS laser, e-local
box, scoring device power supply, and e-local box power cord.
[MD1536]
This Rotomolded ATA case is used to hold five (5) each of the
M-16 Non-Gun firing assembly.
®
Wireless LCCATS Case
[MD1540]
The Wireless LCCATS® case is a component of the Wireless LCCATS
and holds the components required to convert a wired system to
wireless.
E&F Lifter Case
[MD1544]
This durable Pelican® 1660 case is a component of both the Wired
and Wireless LCCATS®.
F Target Case [MD1547]
E Lifter & CCIU Case
[MD1545]
This case is a component of both the Wired and Wireless LCCATS®.
Wireless LCCATS® Case [MD1540]
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
36
LMTS® - Components & Accessories
SYSTEM Cables
SYSTEM ACCESSORIES
BL-640 Long Cable 360/460
[MD1010]
The BL-640 cable is part of the 360 and 460
System configurations. It connects the CB-440
USB control box to the TR-900 target.
BL-650 Daisy Chain 360/460
[MD1011]
The BL-650 Daisy Chain cable is part of the 360
and 460 System configurations. This cable can be
used to connect one TR-900T target to another
TR-900T target.
[MD1553]
The STSv2 sunshade is a component of
the STSv2. It is used to protect the target
face from direct and excessive reflective
sunlight. The STSv2 sunshade is made of
solid metal.
Allen Wrench
[MD2525]
The Allen wrench is used to adjust the
LT100C Laser and the following Laser
Transmitter Rods: LTA-1200, LTA-190, LTA220, LTA-240, LTA-310-2, LTA-380-2, LTA410, LTA-440, and the LTA-450-2.
BL-265 Daisy Chain
390 Linked System Tripod
[MD1007]
[MD3657]
This cable is used to link two TR-700 targets. When linking
TR-700 targets with this cable, the RC-260 remote
cable must be used. The Daisy Chain cable measures
16’ 6” in length.
RC-260 Remote Cable
[MD1031]
This cable plugs into the TR-700 target and is used
to reset and start the system timer. This cable
measures 50’ 1.5” in length.
TABLE OF
CONTENTS
STSv2 Sunshade
Tripod used in the 390 Linked Lane Kit, this
tripod serves as a stable mount for the LDD
in the additional lanes.
PL-10 Lubricant
[MD4259]
PL-10 grease is assembly and all purpose
lubricant used to lubricate 5.56 and 7.62
Laser Transmitter Rods prior to insertion in
the barrel of a weapon.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
37
LMTS® - Components & Accessories
Laser transmitter Brackets
M240 Bracket
[MD2528]
Attaches the MP400MG Laser to the barrel
of the M240 machine gun.
Flex Mount Bracket Package
[MDM2021]
The Flex Mount bracket is used to attach the
MP400B Laser to the barrel of either an M16 or
M4 rifle for either dry or blank-fire training.
Components
M249 Bracket
[MD2529]
Attaches the MP400MG laser to the barrel
of the M249 machine gun.
• (1) MP400B Laser
• (1) Flex Mount Bracket
• (1) AA Battery
Laser Transmitter: MP400B
with M16/M4 bracket [MDM2020]
M2 Machine Gun
Bracket [MD2532]
Attaches the MP400MG Laser to the barrel
of the M2HB machine gun.
Flex-Mount Bracket [MDM2539]
The flex mount bracket is made of aluminum
and steel components and allows the
MP400B Laser to be attached to the barrel
of an M16 or M4 rifle. The Flex-Mount only
works on the MP-400B Laser. It will not
work on MP-400A Lasers.
TABLE OF
CONTENTS
The M16/M4 bracket is used to attach the MP400B
Laser Transmitter to the barrel of either an M16 or
M4 rifle for either dry or blank-fire training. The
MP400B with M16/M4 bracket is sold as a unit.
The bracket is not sold separately.
Components
• (1) Bracketed MP400B Laser • (1) AA Battery
MP-400 STS Laser Transmitter
w/Cable and Bracket [MD2008BKT]
The MP-400 STS Laser Transmitter (does not
use a battery) is externally bracket-mounted
on the user’s firearm barrel for immediate
training and is included as a component in the
STSv2. The cable extends from the laser and
connects with the STS e-Local box (STSv2)
which connects to the scoring device in order to
display hit locations. The MP-400 STS includes
a laser vibration screw and shims.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
38
LMTS® - Components & Accessories
Laser transmitter RODS
The commerical and MP400B laser transmitters can be affixed to the
threaded portion of the transmitter rod which is then inserted into the
firearm barrel. At the strike of the weapon hammer the laser emits a
visible laser point to determine shot placement in dry-fire training. The
laser transmitter rod is for dry-fire use only.
TYPE “B” RODS:
LTA-500 .50 [MD2515]
Designed for use with a .50 caliber weapon.
LTA-1200
[MD2505]
Designed for use with a 12 gauge shotgun.
LTA-190 .177 Air Pistol/Rifle
[MD2506]
Designed for use with a .177 caliber weapon.
LTA-220 .22, .222, .223 [MD2507]
Designed for use with .22/.222/.223 caliber weapons.
LTA-220 .22,
.222, .223 Rod
LTA-1200 Rod
LTA-440 .44 Rod
LTA-380-2 .38,
.357, 9mm Rod
LTA-240 .25 [MD2508]
Designed for use with a .25 caliber weapon.
TYPE “C” RODS:
TYPE “A” RODS:
LTA-310-2 .30, 2” Barrel [MD2509]
Designed for use with a 2”, .30 caliber weapon.
LTA-380-2 .38, .357, 9mm
[MD2511]
Designed for use with any 9mm, .38, or .357 handgun
with a minimum 2-inch barrel.
LTA 410 .40, .41, 10mm [MD2512]
LTA 500C .50 Military [MD2516]
Designed for use with military .50 caliber weapons.
LTA 556C 5.56mm
[MD2517]
Designed for use with a 5.56mm caliber weapon.
LTA 762C 7.62mm [MD2519]
Designed for use with 7.62mm caliber weapons.
Designed for use with .40, .41, and 10mm caliber weapons.
LTA-440 .44 [MD2513]
Designed for use with a .44 caliber weapon.
LTA 450-2 .45, 2” barrel
[MD2514]
Designed for use with a .45 caliber weapon.
TABLE OF
CONTENTS
COMBINATION ROD:
LTA Rifle 5.56/7.62mm
[MD2520]
Designed to mount the commerical laser transmitter into the
barrel of 5.56 and 7.62 caliber weapons.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
39
LMTS® - Components & Accessories
LASER TRANSMITTERS
Laser Transmitter: LTX-Z
[MD2015]
The LTX-Z Laser Transmitter is inserted directly into the barrel of any .38, 9mm,
.357, .42, .44 and .45 caliber pistol allowing the individual to use their own
weapon while dry-fire training; no separate/special weapon required. The weapon
must have a minimum 3-inch barrel.
Components
• LTX-Z Laser
• Adjustment Screw
• .44/.45 Cap
• LTX-Z Battery Pack
• .357/.38/9mm Insert
• .357/.38/9mm/10mm/.40 Cap
• Laser Sleeve
• 10mm/.40 cal. Insert
• Small Screwdriver
• 44/.45 cal. Insert
Laser Transmitter: LT-300
[MD2002A]
The LT-300 Laser Transmitter is used for dry or blank-fire training with the
SafeShot® pistol barrel. This laser is placed in the SafeShot pistol barrel. The
SafeShot barrel then temporarily replaces the shooter’s original pistol barrel. The
LT-300 comes with one (1) LT-300 battery and spring.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
40
LMTS® - Components & Accessories
LASER TRANSMITTERS
Laser Transmitter: MP400B
[MD2005A]
The MP400B Laser Transmitter is the standard laser used with most LMTS® products. It can be used
with a Transmitter rod for dry-fire or mounted to a bracket for blank-fire. The laser operates on and is
sold standard with one AA battery.
Laser Transmitter: MP400MG
[MD2007A]
The MP400MG Laser Transmitter is designed for use with the M249, M240, M2, and M60 machine guns
and is externally bracket-mounted on the user’s firearm barrel for training. The laser attaches to the
bracket by means of a Picatinny rail grabber permanently affixed to the laser. Machine gun brackets
are sold separately. The laser operates on and is sold standard with one AA battery. This laser comes
with a laser vibration screw.
MP400 Laser Transmitter Specifications:
Beam Divergence: <= 1mRad
Class: IIIA
Safety: Complies with eye-safety standards: American ANSI-Z-136.1, N.A.T.O. STANAG No. 3606.
This product is in conformity with the performance standards for laser products under 21 CFR PART 1040
Power Source: 1.5 VDC (AA Battery)
Constant ON mode operation time with new AA Battery: >8 hours
Dimensions (LxWxH): 3.24x1.76x0.95 inch
Weight (with battery, without bracket and rod): <=0.25lb
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
41
LMTS® - Components & Accessories
LASER Accessories & BATTERIES
AA Battery
for MP-400 and TR-700
[MD2521]
1.5 volt DC AA battery.
LT-100 Battery
[MD2522]
The LR44 battery is a special purpose 6V battery
made up of four commercially-available 1.5V 120
mAh batteries packaged together to make the
battery for the LT-100 Laser Transmitter.
LT-300 Battery
[MD2524]
The V392 battery is a special purpose 6V battery
made up of four commercially-available 1.5V
38mAh batteries packaged together to make the
battery for the LT-300 Laser.
LTX-Z Accessory Pack [MD2544]
LTX-Z Battery
[MD2541]
The LTX-Z battery is a special purpose 4.5V
battery made up of three commercially available
1.5V 27mAh batteries packaged together to make
the battery for the LTX-Z Laser.
The LTX-Z Accessory Pack contains all the item that come with
the LTX-Z Laser except the laser module itself.
Components
• (1) LTX-Z Battery Pack
• (1) Laser Sleeve
• (1) Small Screwdriver
STSv2 Laser
Vibration Screw [MD2537]
The laser vibration screw is an included item on
the STS and machine gun lasers and is designed
to aid in receiving the proper vibration from the
strike of the hammer which then pulses the laser
when the shooter fires the weapon.
TABLE OF
CONTENTS
• (1) Adjustment Screw
• (1) .357/.38/9mm Insert
• (1) 10mm/.40 cal. Insert
• (1) .44/.45 cal. Insert
• (1) .44/.45 Cap
• (1) .357/.38/9mm/10mm/.40 Cap
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
42
LMTS® - Components & Accessories
LASER ALIGNMENT DEVIcES
Laser Alignment Device – 5.56mm [MD2533]
The 5.56mm Laser Alignment Device (LAD) is a precision barrel section with an attached
scope designed to facilitate quick and accurate calibration of the beam from an MP400B Laser
concentric with the affixed laser transmitter rod. The weapon’s sights can then be adjusted
to the laser dot at a fixed distance to laser boresight a weapon prior to live-fire zeroing or
confirm a zero on a weapon of unknown condition.
Components
• 5.56mm LAD
• Carrying Case
Laser Alignment Device – 7.62
[MD2534]
The 7.62mm Laser Alignment Device (LAD) is a precision barrel section with an attached
scope designed to facilitate quick and accurate calibration of the beam from an MP400B Laser
concentric with the affixed laser transmitter rod. The weapon’s sights can then be adjusted
to the laser dot at a fixed distance to laser boresight a weapon prior to live-fire zeroing or
confirm a zero on a weapon of unknown condition.
Components
• 7.62mm LAD
• Carrying Case
Laser Alignment Device – Tri-Cal LAD
[MD2536]
The Tri-Caliber Laser Alignment Device (LAD) is a precision barrel section with an attached
scope, designed to facilitate quick and accurate calibration of the beam from an MP400B
Laser concentric with the affixed laser transmitter rod. The weapon’s sights can then be
adjusted to the laser dot at a fixed distance to laser boresight a weapon prior to live-fire
zeroing or confirm a zero on a weapon of unknown condition. The device has interchangeable
bore inserts to accommodate and support bore sight with 5.56 mm and 7.62mm caliber rods.
The base housing itself supports boresight of the .50 caliber.
Components
TABLE OF
CONTENTS
• Tri-Cal LAD
• 7.62mm Bore Insert
• 5.56mm Bore Insert
• Carrying Case
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
43
LMTS® - Components & Accessories
LMTS® Manuals
SYSTEMS:
110 System Manual
[MD4503]
115 System Manual
[MD4545]
130 System Manual
[MD4505]
130-E Warrior Kit Manual
190 System Manual
[MD4561]
[MD4506]
190-3 System Manual [MD4563]
360 System Manual
[MD4513]
365 System Manual
[MD4546]
All manuals contain setup, operation, and troubleshooting instructions.
ACCESSORIES:
Accessory Instruction – Type A Rod for MP400B
[MD4564]
390 v6 System Manual
[MD4559]
Accessory Instruction – Type B Rod for MP400B
[MD4565]
390 Linking Kit Manual
[MD4543]
Accessory Instruction – Type C Rod for MP400B
[MD4566
460 System Manual [MD4510]
Accessory Instruction – Type A Rod for LT100
[MD4567]
LRETS Manual
Accessory Instruction – Type B Rod for LT100
[MD4568]
Accessory Instruction – Type C Rod for LT100
[MD4569]
[MD4536]
Mini-RETS Manual [MD4512]
MUTAR – MGTS-AF Manual
[MD4550]
MUTAR – MGTS-AR Manual
[MD4552]
MUTAR – Alt-C Manual
MUTAR – TRQC Manual
STSv2 Manual
[MD4554]
[MD4556]
[MD4548]
Wireless LCCATS Manual
TABLE OF
CONTENTS
[MD4532]
Accessory Instruction – MG Laser Package [MD4570]
Accessory Instruction – M2 Laser Bracket
[MD4571]
Accessory Instruction – Rifle Laser Package [MD4572]
Accessory Instruction – Wireless LCCATS Repeater
Flex-Mount Laser Bracket Manual
[MD4574]
[MD4573]
M16/M4 Bracket Mount Manual
[MD4575]
Laser Alignment Device Manual
[MD4576]
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
44
LMTS® - Components & Accessories
TR-700 TARGET MASK SETS
MS-100 Standard Mask Set [MD3501]
Set of (3) distance masks for a TR-700 target.
Military Mask Set
[MD3515]
The Military Mask Set enables the TR-700 target to be used for a variety of shooting
scenarios. The Military Mask Set includes 3 each E-Type silhouette targets scaled to
replicate engagements at varying ranges.
Large E-Type Silhouette Mask: When engaged at 25 meters, replicates a 25m zero target or a 300
meter E-silhouette.
Medium E-Type Silhouette Mask: When engaged at 25 meters, replicates a 450 meter E-silhouette.
When engaged at 15 meters, replicates a 15m zero target or a 300 meter E-silhouette.
Small E-Type Silhouette Mask: When engaged at 25 meters, replicates a 600 meter E-silhouette.
When engaged at 10 meters, replicates a 10m zero target or a 300 meter E-silhouette.
Navy Mask Set
[MD3516]
This mask set is designed specifically for the U.S. Navy and is used with the TR-700
targets. The Navy Set consists of two masks: a 10 Yd. Rifle “A” Qualify mask and
a 25 Yd. Rifle “A” Qualify mask.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
45
LMTS® - Components & Accessories
TR-900S TARGET Overlays
M16A2 – 15M E-Type
[MD3518]
15m Scaled Target overlay when engaged
at 15 meters, replicates a 15m zero target
or 300 meter E-silhouette.
M16A2 – 25M E-Type
[MD3520]
25m Scaled Target overlay when engaged
at 25 meters, replicates a 25m zero target
or a 300 meter E-silhouette.
M4
Navy Rifle Sustainment
25 Yard [MD3525]
Overlay designed to replicate the U.S.
Navy Rifle Sustainment paper target
from a shooting distance of 25 yards.
Transition/TranStar II
[MD3526]
Overlay designed for training with the
M-9 Pistol, M-16A1 and A2 rifles, and
machine guns.
[MD3521]
25m Scaled Target overlay with modified
E-Type target silhouette.
M9 [MD3522]
Army Pack [MD3532]
Part of the 360, 365, and 460 System. It
contains four individual overlays (M16/
A2 15 & 25m; M4; M9) relating to the
Army course of fire.
10ft M9 Target overlay when engaged at 10
feet, replicates the 25m M9 target. Used for
engagements at 15 feet to provide better
prediction of live-fire qualification.
Navy Rifle-A 10 Yard
[MD3523]
Overlay designed to replicate the U.S.
Navy Rifle A paper target from a shooting
distance of 10 yards.
Navy Rifle-A 25 Yard
[MD3523-1]
Overlay designed to replicate the U.S.
Navy Rifle A paper target from a shooting
distance of 25 yards.
TABLE OF
CONTENTS
Navy Pack
[MD3532N]
This overlay pack is part of the 360/365/460
target system. It contains five individual
overlays (10 & 25 yd. Rifle Qual., 10M
Zero M4 Carbine Target, 10M Zero M16A2
Target, Transition/ Transtar II) relating to
the U.S. Navy course of fire.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
46
LMTS® - Laser Marksmanship Training Systems
TR-900T target overlays
M16A2 – 25M
The new TR-900T target overlays have improved registration
marks to align the overlay with the target face. Each overlay
now has the target name and scaled shooting distance indicated
along the top for easy recognition.
10-Ring Standard
[MD3555]
The default target included with all TR-900T
targets for basic marksmanhip training. Rings
are scored from 1 (outer most ring) to 10
points (center bullseye).
Machine Gun
M4 - 25M Zeroing
[MD3555-3]
25m Scaled Target overlay with modified
E-Type target silhouette.
M9 - 10 Ft. [MD3555-4]
[MD3524T]
15m Scaled Target overlay when engaged at
15 meters, replicates a 15m zero target or 300
meter E-silhouette.
10ft M9 Target overlay when engaged at 10
feet, replicates the 25m M9 target. Used for
engagements at 15 feet to provide better
prediction of live-fire qualification.
M16A2 – 15M E-Type
900T 4-Pack [MD3555]
[MD3555-1]
15m Scaled Target overlay when engaged at
15 meters, replicates a 15m zero target or 300
meter E-silhouette.
TABLE OF
CONTENTS
[MD3555-2]
25m Scaled Target overlay when engaged at
25 meters, replicates a 25m zero target or a
300 meter E-silhouette.
Part of the 360, 365, and 460 System. It
contains four individual overlays (M16/A2 15
& 25m; M4; M9) relating to the Army course
of fire.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
47
LMTS® - Components & Accessories
MULTi-use target overlays
25m Timed Fire
15m Alt-C
[MD3556]
[MD3563]
This overlay is included with the LMTS
MUTAR – TRQC System and the MUTAR –
TRQC Package. It replicates the U.S. Air
Force Timed Fire target and is designed to
be engaged at a distance of 25m.
This overlay is included with the LMTS MUTAR –
Alt-C System and the MUTAR – Alt-C Package.
It replicates the U.S. Army Alt-C target and is
designed to be engaged at a distance of 15m.
15m Timed Fire
25m Alt-C
®
[MD3557
This overlay is included with the LMTS
MUTAR – TRQC System and the MUTAR –
TRQC Package. It replicates the U.S. Air
Force Timed Fire target and is designed to
be engaged at a distance of 15m.
25m Slow Fire
This overlay is
MUTAR – TRQC
TRQC Package.
Force Slow Fire
be engaged at a
[MD3558]
included with the LMTS
System and the MUTAR –
It replicates the U.S. Air
target and is designed to
distance of 25m.
[MD3564]
This overlay is included with the LMTS MUTAR
– Alt-C System and MUTAR – Alt-C Package.
It replicates the U.S. Army Alt-C target and is
designed to be engaged at a distance of 25m.
10m MGTS
[MD3565]
This overlay is included with the LMTS MUTAR –
MGTS and MUTAR – MGTS Package. It replicates
the 10m machine gun target and is designed to
be engaged at a distance of 10m.
15m Slow Fire [MD3559]
This overlay is included with the LMTS
MUTAR – TRQC System and the MUTAR –
TRQC Package. It replicates the U.S. Air
Force Slow Fire target and is designed to
be engaged at a distance of 15m.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
48
LMTS® - Components & Accessories
power supplies
SCORING DEVICES AND ACCESSORIES
TR-700 Switching
Power Supply [MD1004]
Scoring Device w/ USB to
Serial Adaptor [MD3600A]
The TR-700 switching power supply is
used to power TR-700 targets from 110V
power outlets.
Laptop computer used to control LMTS
systems. A USB to serial adaptor is
included with the scoring device.
USB to Serial Adaptor
TR-900T Switching
Power Supply [MD1032]
The TR-900T switching power supply is
used to power targets from 100V to 240V
power supply ranges.
[MD3607]
This is the adaptor cable used to convert a
USB port on a laptop to a serial port. This
is generally used for newer laptops that
do not have serial ports.
Parallel Port Card Bus
[MD3610]
The parallel port card bus gives newer
scoring devices a parallel port connection.
12v DC to AC inverter
[MD1019]
The 400 watt, 12V inverter is used to
convert Direct Current to Alternating
Current and is part of the accessory kit. It
is designed for use with a LMTS® scoring
device or with LMTS static targets (i.e.
460, MUTAR – Alt-C, MUTAR – MGTS).
The inverter has both a cigarette lighter
adapter and “alligator” clips to attach to a
12V battery.
TABLE OF
CONTENTS
LMTS SYSTEM SOFTWARE
New System Software
(All Systems)
Software provided via CD to control LMTS
equipment.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
49
LMTS® - Components & Accessories
LMTS® TARGETS
TR-900T Target
[MD3009]
The TR-900T target is the central component of the 360 and 460 Series of Laser Marksmanship Training Systems.
The TR-900T detects laser pulses and transmits laser impact data to a scoring device for analysis displaying the
exact location of laser hits in the software. The TR-900T can be used in a single-target configuration or can also be
daisy-chained with up to nine additional targets. The target has a buzzer which allows hits to be heard. The target
comes complete with power supply and standard overlay.
TR-700 Target [MD3008A]
The TR-700 target is the central component of the Mini-RETS, 110, 115, and 130 Systems. The TR-700 can be
powered by 4 AA batteries or can be connected to an external 9VDC power source. Laser pulses are detected on the
target face and an LED hit counter displays the number of laser impacts, up to ninety-nine. A buzzer can also be
enabled that creates an audible beep when the target is hit by the laser. The target includes a timing function that
enables hit detection for a specific period of time. The target comes complete with power supply.
Basic 3-D E-Type Target
[MD3015]
This version of the E-Type target is a component
of the Wired and Wireless LCCATS® systems and
includes the LCCATS® E-Type Target only. The
targets receive laser “hits” and transmit data to
the LCCATS® scoring device through either the
CCIU (Wired LCCATS®) or the Wireless Interface
Box (WIB) (Wireless LCCATS®).
TABLE OF
CONTENTS
Basic 3-D F-Type Target
[MD3020]
This version of the F-Type target is a component
of the Wired and Wireless LCCATS® systems and
includes the LCCATS® F-Type Target only. The
targets receive laser “hits” and transmit data to
the LCCATS® scoring device through either the
CCIU (Wired LCCATS®) or the Wireless Interface
Box (WIB) (Wireless LCCATS®).
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
50
LMTS® - Components & Accessories
LMTS® TARGETS
25/15m Reflective Target
[MD3534]
The Reflective Target is constructed of weatherresistant corrugated plastic coated with a highly
reflective surface. The target is reversible with
a 25 meter zero target image on one side and a
15 meter zero target image on the reverse side.
The surface facilitates visual feedback when the
laser hits its surface, even in bright sunlight and
is used as an aid in marksmanship training.
Reflective Target Mini
Target 390 - TranStar II
(Scaled) [MD3660-S]
Paper target used with the 390v6 and Linking
Systems and is a scaled version of the TranStar
II target.
Target 390 - M9 (Full size)
[MD3536]
Target Set –190 System
[MD3661]
E-Type silhouette paper target used with the
390v6 and Linking Systems.
Target 390 - M9 (Scaled)
The 190 Personal Marksmanship Training System
includes 10 ring, silhouette, and deer targets.
Additional paper targets can be purchased to
include many targets for law enforcement and
hunting customers.
[MD3661-S]
E-Type silhouette paper target used with the
390v6 and Linking Systems.
Target 390 - Modified QIT
(Full size) [MD3688-1F]
Paper target used with the 390v6 and Linking
Systems and is a replica of the Full Size QIT target.
[MD3537]
The 190 System Target Set is the standard 3
target set included with the 190 System. The 3
targets include 10 ring, silhouette, and deer.
TABLE OF
CONTENTS
Paper target used with the 390v6 and Linking
Systems and is a replica of the Full Size TranStar
II target.
[MD3535]
The Mini-Reflective Target is part of the 130-1E
Warrior Kit. The target is reversible with a 15
meter zero target image on one side and a 10
meter boresight target image on the reverse side.
190 System
Extra Paper Targets
Target 390 - TranStar II
(Full size) [MD3660]
Target 390 - Modified QIT
(scaled) [MD3688-1]
Paper target used with the 390v6 and Linking
Systems and is a scaled version of the QIT target.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
51
LMTS® - Components & Accessories
LMTS TARGETS
Target 390 - B27E Blue
(Full size) [MD3688-5F]
Target 390 - E Silhouette
(Full size) [MD3688-2F]
Paper target used with the 390v6 and Linking Systems
and is a replica of the Full Size E Silhouette target.
Target 390 - E Silhouette
(scaled) [MD3688-2]
Paper target used with the 390v6 and Linking Systems
and is a scaled version of the E Silhouette target.
Target 390 - 5 Bullseye
(Full size) [MD3688-3F]
Paper target used with the 390v6 and Linking
Systems and is a replica of the Full Size 5
Bullseye target.
Target 390 - 5 Bullseye
(scaled) [MD3688-3S]
Paper target used with the 390v6 and Linking Systems
and is a scaled version of the 5 Bullseye target.
Target 390 - Q (Full size)
[MD3688-4F]
Paper target used with the 390v6 and Linking Systems
and is a replica of the Full Size Q target.
Target 390 - Q (scaled)
[MD3688-4S]
Paper target used with the 390v6 and Linking Systems
and is a scaled version of the Q target.
TABLE OF
CONTENTS
Paper target used with the 390v6 and Linking Systems
and is a replica of the Full Size B27E Blue target.
Target 390 - B27E Blue
(scaled) [MD3688-5S]
Paper target used with the 390v6 and Linking Systems
and is a scaled version of the B27E Blue target.
Target 390 - B21E Silhouette
(Full size) [MD3688-6F]
Paper target used with the 390v6 and Linking
Systems and is a replica of the Full Size B21E
Silhouette target.
Target 390 - B21E Silhouette
(scaled) [MD3688-6S]
Paper target used with the 390v6 and Linking Systems
and is a scaled version of the B21E Silhouette target.
Target 390 - ICE QT
(Full size) [MD3688-7F]
Paper target used with the 390v6 and Linking Systems
and is a replica of the Full Size ICE QT target.
Target 390 - ICE QT
(scaled) [MD3688-7S]
Paper target used with the 390v6 and Linking Systems
and is a scaled version of the ICE QT target.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
52
LMTS® - Components & Accessories
SAFESHOT® Upper Receivers & BARRELS
SafeShot® Upper Receivers and Barrels bring unparalleled realism and safety to marksmanship, close-quarter and tactical training. By
replacing the upper receiver or barrel of the weapon without any other modification they allow the trainee to use their own firearm while
maintaining original trigger pull to duplicate live-fire function. Combined with the Laser Marksmanship Training Systems (LMTS) lasers and
targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blank-fire to a new level of realism. Chambering
only patented SafeShot® lead-free blanks of the same caliber, they permit training with added safety, whether indoor or in the field, while
providing the recoil, sound, and smell of live-fire - “everything but the bullet”.
SafeShot® M-16 Upper Receiver
[MD4001]
SafeShot® M16 Upper Receivers chambers only patented 5.56 SafeShot®
lead-free blanks of the same caliber. The SafeShot® M16 upper receiver
is made of blue-anodized metal allowing for immediate recognition as a
training unit. The one-piece barrel prevents muzzle discharge and will not
affect the lower receiver.
M240 SafeShot® Barrel
[MD4002]
Chambering only patented 7.62 SafeShot® lead-free blanks of the same
caliber, the one piece M240 barrel prevents muzzle discharge and will not
affect the lower receiver.
M249 SafeShot® Barrel
[MD4003]
Chambering only patented 5.56 SafeShot® lead-free blanks of the same
caliber, the one piece M249 barrel prevents muzzle discharge and will not
affect the lower receiver.
SafeShot® M4 Upper Receiver [MD4004]
SafeShot® M4 Upper Receivers chambers only patented 5.56 SafeShot®
lead-free blanks of this caliber. The SafeShot® M4 upper receiver is made
of blue-anodized metal allowing for immediate recognition as a training
unit. The one-piece barrel prevents muzzle discharge and will not affect
the lower receiver.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
53
LMTS® - Components & Accessories
NON-GUNS & SAFESHOT® BARRELS
SafeShot® Upper Receivers and Barrels bring unparalleled realism and safety to marksmanship, close-quarter and tactical training. By replacing the upper
receiver or barrel of the weapon without any other modification they allow the trainee to use their own firearm while maintaining original trigger pull to
duplicate live-fire function. Combined with the Laser Marksmanship Training Systems (LMTS®) lasers and targets, the true point-of-impact of the laser beam
provides recordable accuracy that takes blank-fire to a new level of realism. Chambering only patented SafeShot lead-free blanks of the same caliber, they
permit training with added safety, whether indoor or in the field, while providing the recoil, sound, and smell of live-fire - “everything but the bullet”.
M-16 Non-Gun
[MD4011]
These are modified Classic Army® brand M16 Rifle AEG (Airsoft Electric Gun). They are external
replicas of standard M16A2 Rifles with very similar weight and balance. These Non-Guns are nearfully functional M16 rifle training devices; they will accept the training magazines provided with them.
The trigger, safety/selector switch, magazine release, front and rear sights, all function normally.
Upon trigger activation the Non-Gun will cycle itself by means of an internal electric motor powered a
rechargeable battery pack that is concealed in the butt stock.
Components
• M-16 Non-Gun w/ Magazine
• Carrying Handle
SafeShot® M-9 Beretta Barrel
• Battery
• Battery Charger
[MD4008]
The SafeShot® M9 training barrel chambers only patented 9mm SafeShot® lead-free blanks of this
caliber. The M9 barrel allows the shooter to use original magazine and recoil springs and there is no
need to alter any component of the firearm other than the barrel. The shooter uses their original pistol
receiver and sights for easy transition from blank-fire to live-fire. The SafeShot® M9 barrel has threads
in the muzzle end to accept an LMTS LT-300 Laser.
SIG P228 Barrel
[MD4022]
The SIG P228 SafeShot training barrel chambers only patented SafeShot® lead-free blanks of the
.38/9mm caliber. The SIG P228 SafeShot® barrel has threads in the muzzle end to accept an LMTS®
LT-300 Laser Transmitter. This barrel includes a 13 lb. reduced-power recoil spring.
®
GLOCK 17 Barrel
[MD4010]
The GLOCK 17 SafeShot® 5 inch training barrel chambers only patented SafeShot® lead-free blanks
of the .38/9mm caliber. The GLOCK 17 SafeShot® barrel has threads in the muzzle end to accept
an LMTS® LT-300 Laser Transmitter.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
54
LMTS® - Components & Accessories
SAFESHOT® BLANKS
All SafeShot® Blanks are manufactured and configured to chamber only in SafeShot®-equipped firearms of the same caliber. They are
designed for repetitive fire, replicated live-fire. They contain environmentally safe lead-free priming that accord well with indoor usage.
SafeShot® blank ammunition simulates the recoil, sound, and smell associated with live firing. Combined with the Laser Marksmanship
Training Systems (LMTS) lasers and targets, the true point-of-impact of the laser beam provides recordable accuracy that takes blankfire to a new level of realism.
5.56mm Blanks, Linked,
Case, 800 rnds [MD4251]
SafeShot® 5.56mm linked blanks
can be used in conjunction with
SafeShot® M249 barrel and MP400MG lasers. They are packaged
in 100-round belts, eight belts per
canister.
5.56 Blank Ammunition
[MD4254]
SafeShot® 5.56mm blanks can be
used in conjunction with SafeShot®
M16 and M4 barrels and MP-400B
lasers. They are packaged in boxes
of 20-rounds and supplied in
1200-round cases.
TABLE OF
CONTENTS
7.62mm SafeShot® BFS
Blank, Case 800 rnds
[MD4255]
SafeShot® 7.62mm blanks can be
used in conjunction with SafeShot®
M16 and M4 barrels and MP-400B
lasers. The blanks come in a case
of 800 linked blank rounds for 7.62
caliber SafeShot® barrel.
9mm Blank Ammunition
[MD4256]
SafeShot® 9mm blanks can be used
in conjunction with a SafeShot®
9mm barrel and LT-300 internal
laser. They are packaged in boxes
of 50-rounds and supplied in
1000-round cases.
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
55
LMTS® - Equipment Training
LMTS® - EQUIPMENT TRAINING SERVICES
New Equipment Training – CONUS and OCONUS
One to five day training sessions can be purchased to help new users set up and learn how to maximize utilization of their new equipment.
Sessions are individually priced depending on the number of trainers and days. The preferred ratio of instructor to student is one (1) instructor
to five (5) students. Classes are taught using the customer’s equipment. The customer is responsible for ensuring the equipment is on-site
and functioning at the time of training.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
56
Interoperable Deployable Communication Systems
SHERPA® Expedition®
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice. To order or for pricing
please contact L-3 EOTech, by calling our office at 443-285-4700 or by sending an email to [email protected].
57
Interoperable Deployable Communication Systems
SHERPA® series
Expedition®
[MD5000]
The SHERPA® Expedition® provides a lightweight, flexible, integrated
solution to meet emergency communications needs – disaster
recovery, emergency management, continuity of operations, rapid
infrastructure. This flexible core provides voice, video, and data in
a single, integrated package and serves the role as a gap-filler for
those needing flexible communications fast. SHERPA®, shouldering
the load.
Traveler® [MD5006]
The SHERPA® Traveler® is the latest edition to the SHERPA® family
of interoperable deployable communications systems. The Traveler
is the ideal communications tool to provide incident commanders
immediate, high-quality communications to allow rapid establishment
of command and control. Designed to provide immediate
communications in an austere environment, the SHERPA® Traveler®
is a self-contained module that securely provides up to 10 wired or
wireless users Voice over IP, Radio over IP, and Internet connectivity to
the home network. The Traveler® is designed to go anywhere rapidly:
it can be carried by a single person, stows in typical airplane overhead
storage, and supports universal AC voltage, any vehicle’s DC power,
and even has an internal battery.
TABLE OF
CONTENTS
All products, components and specifications are subject to change without notice.
To order or for pricing please contact L-3 EOTech, 443-285-4700 or [email protected].
58
EOTech
TABLE OF
CONTENTS
7142 Columbia Gateway Drive
Columbia, MD 21046
Tel: 443-285-4700
[email protected]
This material is L-3 EOTech general capabilities information and does not contain any controlled technical data as defined within the International Traffic in Arms Regulations
(ITAR) or Export Administration Regulations (EAR).