DH-ESU 5000

DH-ESU 5000-9000 kg
www.dhollandia.com
DH-ESU 5000-9000 kg
Application
A
The heavy duty tail lift model DH-ESU has been designed for extreme lift capacities from 5000 to 9000 kg,
and is mainly used for the transport of heavy machinery, forklifts, agricultural tractors etc…
The platform depth is produced to meet individual customer requirements. In addition to the standard
equipment, the DH-ESU is equipped with hydraulic stabilising legs and a powerful 4000 W fan cooled
electric motor.
On request, the DH-ESU can be modified to serve as a ramp. It is important to have the chassis sufficiently
reinforced for the mounting of this type of tail lift.
General Specifications
G
PLATFORM
• Reinforced steel platform, shotblasted and zinc sprayed [1]
• Steel rollers to protect the platform on the ground
FUNCTIONALITY - MECHANICAL CHARACTERISTICS
• Reinforced lift frame, adapted for extreme lift capacities [2]
• Automatic hydraulic tilting at ground level
• Platform tilt adjustable at any position from the exterior controls
HYDRAULICAL CHARACTERISTICS
• 2 or 3 single acting central lift cylinders (3 for 9000 kg)
• 2 single acting tilt cylinders with spring assisted platform opening (for ver-
•
•
•
•
sions 5000-6000 kg) or
2 double acting tilt cylinders with powered platform opening (for versions
7500-9000 kg)
Electric safety valves on all cylinders
2 hydraulic stabilising legs with reinforced mechanism [3]
Accelerated lowering for the 7500 and 9000 kg versions
Cylinder piston rods in chromed stainless steel (INOX)
[1]
ELECTRICAL CONTROLS
Controlled without electronic components
Battery switch with removable key
2-handed control for all functions from the exterior controls
Original Bosch 4000 W motor with fan cooling
•
•
•
•
FITTING OF THE LIFT
• Chassis work and fitting details to be discussed and coordinated prior to order
[2]
confirmation
• Chassis and subframe requirements to be validated with the vehicle manufacturer
• Weld-on mounting plates, to be reinforced during tail lift fitting
FINISH - MAINTENANCE
• Equipment conforms with CE safety Directives
• All pins are zinc plated and chromed
• Paint finish : 2K polyester primer coating
[3]
www.dhollandia.com • [email protected] • UK : [email protected]
Capacity chart
■ 500 kg
■ 3500 kg
■ 750 kg
■ 4000 kg
■ 1000 kg
■ 5000 kg
■ 1500 kg
■ 6000 kg
■ 2000 kg
■ 7500 kg
■ 2500 kg
■ 9000 kg
■ 3000 kg
TTechnical specifications
Lift capacity
5000 - 6000 - 7500 - 9000 kg
Standard platform depth
STEEL : 2000 mm
Longer platforms are available as an option (see option S203)
Standard platform widths
STEEL : 2350 - 2480 - 2500 - 2520 mm (other widths : option S260)
Choice between lift arm centres
1300 mm
Centre of gravity of the load
1000 mm
Proper weight indications (*)
DH-ESU 5000-6000 kg : from 1250 kg onwards
DH-ESU 7500-9000 kg : from 1450 kg onwards
(*) The proper weights mentioned are indicative and may vary according to the execution of the tail lift. Dhollandia retains the right to modify technical data without prior notice.
Main options (other options on request)
M
S001
2-button wander lead with
spiral cable
S006
4-button foot control fitted
fitted
onto the platform
S040
Battery box 24V batteries not included
S090
Platform lights mounted onto
the platform
S660...662
S660 662
Various platform fl
ags
flags
S201
Steel platform flat
flat between
the main beams
S203
Extension of platform depth
per 10 cm
S273
Aluminium scuff plates to
protect the steel platform
S370
Mechanical locking pins
under the lift arms
S239.LSU
S408
Foldable platform with reinforced hinge construction (on request - subject to prior approval)
Inclination of the platform in
ramp position
S600...603
S600
603
Various platform seals
for the rear frame of the
vehicle body
DH-AR 3T - 5T - 9T - 16T
Hydraulic ramp with a single-piece steel platform
DH-AR2 3T - 5T - 9T - 16T
Hydraulic ramp with a double-fold steel platform
www.dhollandia.com • [email protected] • UK : [email protected]
EN–02/2008
Alternatives in the same capacity range
A