A000467-015 Ackr omfattning 150216

Appendix 2
Date
Reference
2015-02-16
2014/2657
Scope of accreditation
DEKRA Industrial AB. 4390
Den ackrediterade OFP verksamhet kan utföras både i Dekras egna lokaler samt i fält. De
egna lokalerna finns på följande platser: / The accredited NDT activities can be performed both
at Dekras permanent facilities as well as in field activities at the customers sites. Dekras
permanent facilities are located at the following addresses:
Fanérvägen
Norra Kungsgatan 5
Gamlestadsvägen 2
Kompanigatan 5
Pumpgatan 4
Torpslingan 25D
Flintrännegatan 21
Torsgränd 15
Formaregatan 1
S. Järnvägsgatan 47
Hantverkaregatan 14
Hemvärnsgatan 11 B
Tegelvägen 22
Industrigatan 6
Port-Anders Gata 3
Blomstermåla
Gävle
Göteborg
Jönköping
Karlstad
Luleå
Malmö
Norrköping
Oskarshamn
Skellefteå
Stenugnsund
Solna
Sundsvall
Trollhättan
Västerås
Oförstörande provning/Non destructive testing
Metod/Method
Standard/Standard
Radiografering/
Tillämpbara acceptanskrav
enligt standard/Applicable acceptance requirement
according to standard
Radiography
Svets/Weld
SS-EN 12517-1
SS-EN 13445
SS-EN 13480
SS-EN 12952
SS-EN 12953
SS-EN ISO 10675-1
SS-EN ISO 10675-2
IIW Reference radiographs
ASME sec III
EN 13458-2
SS-EN 13530-2
SS-EN 1251-2
SS-EN 13133
SS-EN 13134
SS-EN 12517-2
ASME sec VIII
SS-EN 1435
ASME sec V
SS-EN 14784-1, 2
SS-EN ISO 17636-1
1(5)
Appendix 2
Date
Reference
2015-02-16
2014/2657
Scope of accreditation
DEKRA Industrial AB. 4390
Metod/Method
Standard/Standard
Ultraljud/Ultrasonic
Svets/Weld
Plåt/Plate
Stång, smide/Bar and
forging
Gjutgods/
Casting
Tjockleksmätning/
thickness measurement
Metod/Method
Tillämpbara acceptanskrav
enligt standard/Applicable acceptance requirement according
to standard
SS-EN ISO 17640
SS-EN 1714
SS-EN ISO 10863
SS-EN 15617
ASME sec V
SS-EN 10160
SS-EN 10307
ASME sec V
SS-EN ISO 11666
SS-EN 1712
ASME sec III
ASME sec VIII
SS-EN 10160
SS-EN 10307
ASME sec III
SS-EN 10228-3
SS-EN 10228-4
SS-EN 10308
ASME sec V
SS-EN 10228-3
SS-EN 10228-4
SS-EN 10308
ASME sec III
SS-EN 12680-1
SS-EN 12680-2
SS-EN 12680-3
ASME sec V
SS-EN 12680-1
SS-EN 12680-2
SS-EN 12680-3
ASME sec III
SS-EN 14127
SS-EN 14127
Standard/Standard
Magnetpulverprovning/
Tillämpbara acceptanskrav
enligt standard/Applicable acceptance requirement
according to standard
Magneticparticle testing
Svets och material/
Weld and material
Smide, Stång/
Forging and bar
Gjutgods/
Casting
SS-EN ISO 23278
ASME sec III
ASME sec VIII, appendix 8
SS-EN ISO 17638
SS-EN ISO 9934-1
ASME sec. V
SS-EN 10 228-1
SS-EN 10 228-1
SS-EN ISO 9934-1
SS-EN 1369
2(5)
Appendix 2
Date
Reference
2015-02-16
2014/2657
Scope of accreditation
DEKRA Industrial AB. 4390
Metod/Method
Penetrantprovning/
Standard/Standard
Tillämpbara acceptanskrav
enligt standard/Applicable acceptance requirement according
to standard
Penetrant testing
Svets och material/
Weld and material
Smide, Stång/
Forging and bar
Gjutgods/
Casting
SS-EN 571-1
SS EN ISO 3452-1
SS EN ISO 3452-5
SS EN ISO 3452-6
ASME sec. V
SS-EN ISO 23277
ASME sec III
ASME sec VIII, appendix 8
KBM
SS-EN 571-1
SS-EN 10228-2
SS-EN 571-1
ASME sec V
SS-EN 1371-1
EN 1011-8
ASME sec VIII appendix 8
Metod/Method
Standard/Standard
Tillämpbara acceptanskrav
enligt standard/Applicable acceptance requirement according
to standard
Virvelströmsprovning/
Eddy current testing
Svets och material/
Weld and material
SS-EN 1711
Metod/Method
Visuellkontroll/Visual
Svets/
Weld
Standard/Standard
ET - 101
Tillämpbara acceptanskrav
enligt standard/Applicable acceptance requirement
according to standard
SS-EN ISO 5817 :2007
SS-EN ISO 10042 :2005
SS-EN ISO 17637:2011
3(5)
Appendix 2
Date
Reference
2015-02-16
2014/2657
Scope of accreditation
DEKRA Industrial AB. 4390
Företaget uppfyller Strålsäkerhetsmyndighetens krav på tredjepartsställning och provnings-kompetens när
det gäller återkommande kontroll med kvalificerade provningssystem enligt nedan (område 2.2 enligt
STAFS 2003:12 § 5) / The company fulfills the requirements from the Swedish Radiation Safety Authority’s (SSM) on 3:rd party status and
competence of testing for periodic inspection with qualified testsystem according to table below (area 2.2 in comments to STAFS 2003:12 § 5)
Provningsmetod
/Testmethod
Radiografisk provning/
Typ av provning/Type of
test
Manuell och mekaniserad/
Radiographic
Manuell and mechanized
Provningsprocedur/
Test procedure
Enligt procedur godkänd av ett
kvalificeringsorgan godkänt av
SSM. According to a qualified procedure
approved by a qualification organisation
approved by SSM.
Ultraljudprovning/
Manuell och mekaniserad/
Ultrasonic
Manuell and mechanized
Enligt procedur godkänd av ett
kvalificeringsorgan godkänt av
SSM. According to a qualified procedure
approved by a qualification organisation
approved by SSM.
Magnetpulverprovning/
Manuell och mekaniserad/
Magnetic particle
Manuell and mechanized
Enligt procedur godkänd av ett
kvalificeringsorgan godkänt av
SSM. According to a qualified procedure
approved by a qualification organisation
approved by SSM.
Provning med penetrant/
Manuell och mekaniserad/
Penetrant
Manuell and mechanized
Enligt procedur godkänd av ett
kvalificeringsorgan godkänt av
SSM. According to a qualified procedure
approved by a qualification organisation
approved by SSM.
Virvelströmsprovning/
Manuell och mekaniserad/
Eddy current
Manuell and mechanized
Enligt procedur godkänd av ett
kvalificeringsorgan godkänt av
SSM. According to a qualified procedure
approved by a qualification organisation
approved by SSM.
Visuell kontroll/
Visual
Manuell och mekaniserad/ Enligt procedur godkänd av ett
Manuell and mechanized
kvalificeringsorgan godkänt av
SSM. According to a qualified procedure
approved by a qualification organisation
approved by SSM.
Avgjutnings-VT
Casting-VT
Manuell och mekaniserad/ Enligt procedur godkänd av ett
Manuell and mechanized
kvalificeringsorgan godkänt av
SSM. According to a qualified procedure
approved by a qualification organisation
approved by SSM.
Ändringar sedan senaste beslutet är skrivna I fet stil / Changes from last edition of the scope are printed
in bold text.
4(5)
Appendix 2
Date
Reference
2015-02-16
2014/2657
Scope of accreditation
DEKRA Industrial AB. 4390
The accreditation does not cover sampling activities. If the laboratory, regardless of this, performs the
sampling by itself, then the testing is not considered to be performed under accreditation.
The accreditation does not cover opinions and interpretations. If the laboratory, regardless of this,
expresses opinions and/or provides interpretations in the test report, then the testing is not considered to
be performed under accreditation.
The scope of accreditation is flexible according to specification in the terms of accreditation, annex 1 to this
decision.
- Changed methods where the changes are included in the flexible scope may, even if a new decision has
not been issued, be used as accredited methods.
- The accredited laboratory shall always have in readiness an updated list on methods, where it is clear
what changes have been made in the flexible accreditation from the content in this decision.
5(5)