DCM 3747 - Regloplas 36 kW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water

Transcription

DCM 3747 - Regloplas 36 kW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water
3246 West Monroe Street
Waukegan, IL 60085-3029 USA
1-847-360-9170 Phone
www.diecastmachinery.com
Die Cast Machinery, LLC Inventory number: 3747
We offer for sale, subject to prior sale and the terms listed below:
One (1) Used Regloplas 36 kW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water
Circuit
Model 301
Status: Available
Specifications:
Metric / U.S. Standard
Main Heater Power (Zone #1):
Pump Motor Size (Zone #1):
Flow Rate (Zone #1):
Connection size/type (Zone #1):
Maximum Operating Temperature:
Power Requirements:
Overall Size (L x W x H):
Weight:
36 kW / 36 kW
2.83 KW / 3.8 HP
75 liters per minute / 20 gallons per minute
1.81 mm NPT / 3/4 inch NPT
300 degrees C / 572 degrees F
480 volt / 3 phase / 60 cycle / 480 volt / 3 phase / 60 cycle
435 x1350 x1165 mm / 17 x 53 x 46 inches
210-225 kg / 463-496 lbs
Features & Accessories:
Pump with magnetic drive, Leak-free
Separate expansion vessel
Fail-safe circuit in case of heat contactor
Terms of Sale:
Price: request quotation
Shipping Terms: F.O.B. Warehouse
Expedited International shipping available to the following Countries: India, Germany, France, Spain, Portugal, Switzerland,
Italy, England, Sweden, Netherlands, Poland, Turkey, Ukraine, UK, Great Britain, Russia, Australia, Japan, Korea, Thailand,
China, Singapore, Canada, USA, Mexico, Brazil, Argentina, Columbia, Venezuela, Peru, Europe, Asia, North America
www.diecastmachinery.com
Page 1 of 7
Die Cast Machinery, LLC
Product Photos:
Click on any image for a larger view
www.diecastmachinery.com
Page 2 of 7
Die Cast Machinery, LLC
www.diecastmachinery.com
Page 3 of 7
Die Cast Machinery, LLC
www.diecastmachinery.com
Page 4 of 7
Die Cast Machinery, LLC
www.diecastmachinery.com
Page 5 of 7
Die Cast Machinery, LLC
www.diecastmachinery.com
Page 6 of 7
Die Cast Machinery, LLC
Description: Used, Regloplas Model 301 36 kW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with
Cooling Water Circuit For Sale, Features include: Pump with magnetic drive, Leak-free, Separate expansion vessel, Fail-safe
circuit in case of heat contactor, , , , RT50 Controls, Second Hand, DCM-3747
The following technical terms are to assist you with searches: Used | Second Hand | Regloplas |301 | 36 kW | Single Zone
Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit | For Sale | Pump with magnetic drive,
Leak-free | Separate expansion vessel | Fail-safe circuit in case of heat contactor | | | | RT50 Controls | DCM-3747
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not
incorporate approved activating mechanisms, operator safety devices or savety guards as required by OSHA or otherwise. It
shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast
Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges
that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or
machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry
standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits,
claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in
connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder.
Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect
the items before purchase.
www.diecastmachinery.com
Page 7 of 7