Alloy-902-Material- Alloy-902-pipe- Alloy-902-tube

ALLOY 902, UNS N09902, NI SPAN C 902
Introduction :
Aesteiron continues to expand its product line in Alloy 902 to meet the emerging customer needs, and whereas Aesteiron Steels Pvt. Ltd. is ISO 9001 : 2008
Certified, ASPL has a great Projects in this grade in all parts of the world with renowned suppliers presenting the wide range of services. We pride ourselves
in the quality of our products, our competitive pricing and our exceptional customer service. We have been recognized for our outstanding customer service
in satisfaction surveys of top- ranked mills in india and all over the world. ASPL, with iron and steel as its main business, manufactures premium steel products
with high technologies and a high added value and fosters three major product categories, namely carbon steel, stainless steel and special steel. Through our
worldwide marketing network,these premium proudcts not only satisfy the demand on the domestic market but are also exported to more than forty countries
and regions in Asia, Africa, Europaand America, extensively applied to various. We are a highly qualified by our customers worldwide as a sustainable and
trustwothy to meet their requestand need at the right time and the right time and the right area. We strive and stand commited to maintain this respectable position
by catering to the requirements of our customers in the best possible way leaving no room for complaints.
Products Available
in forms :
Chemical Composition
• ALLOY 902, UNS N09902, NI SPAN C 902 Plates
• ALLOY 902, UNS N09902, NI SPAN C 902 Pipes
• ALLOY 902, UNS N09902, NI SPAN C 902 Round Bar
• ALLOY 902, UNS N09902, NI SPAN C 902 Tube
• ALLOY 902, UNS N09902, NI SPAN C 902 Flanges
• ALLOY 902, UNS N09902, NI SPAN C 902 Wire
• ALLOY 902, UNS N09902, NI SPAN C 902 Fittings
Carbon
Manganese
Phosphorus
Sulphur
Silicon
Chromium
Nickel
Molybdenum
Cobalt
Aluminum
Standard Available
in forms :
Mechanical Properties
• ASM 5221
• ASM 5223
• ASM 5225
Ultimate Tensile Strength, Mpa(psi) 1210(175000) 1210(175000) 1210(175000)
0.2% Offset Yield Strength, Mpa(psi) 760(110000) 760(110000) 760(110000)
Elongation %
25
25
25
ALLOY 902
UNS
N09902
NI SPAN C
902
0.06 max
0.80 max
0.04 max
0.04 max
1.00 max
4.90-5.75
41.0-43.5
2.20-2.75
0.30-0.80
Bal
0.06 max
0.80 max
0.04 max
0.04 max
1.00 max
4.90-5.75
41.0-43.5
2.20-2.75
0.30-0.80
Bal
0.06 max
0.80 max
0.04 max
0.04 max
1.00 max
4.90-5.75
41.0-43.5
2.20-2.75
0.30-0.80
Bal
ALLOY 902
UNS
N09902
NI SPAN C
902
Corrosion Resistance
• NI-SPAN-C alloy 902 is not “stainless”, as it will acquire an adherent red-brown oxide film when exposed to outdoor environments.
Heat Treating
• In order to maintain bright surfaces during final heat treatment the process must be carried out in a high vacuum or in a very pure hydrogen atmosphere.
• An absolute pressure of 0.1 micron or less is required for bright work in vacuum furnaces.
• Pressures around 1.0 micron may produce a faint straw color.
• Ultrapure hydrogen, such as that produced by palladium diffusion cells, will also maintain brightness.
Annealing
• The alloy is carefully processed and ready for heat treatment after fabrication.
• If, for any reason, it is desired to soften the material by annealing, the following instructions should be carefully observed:
• Heat at 1850°F in a reducing atmosphere free from sulfur and quench rapidly.
• Delay in quenching will result in partial hardening of the alloy and subsequent adjustment of the TEC by cold work and heat treatment will be impaired.
• Annealing time is governed by the dimensions of the work.
Pickling
• Thin oxide films formed by heating the alloy in atmospheres less pure than ultrapure hydrogen or in vacuums lower than those cited can be removed by
mechanical abrasion or by pickling.
• Pickling the final product will result in a decrease in fatigue strength; therefore abrasive blasting or mechanical polishing should be considered for components
which require best fatigue resistance.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
[email protected]
www.aesteiron.com
© 2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
Welding
• The alloy can be joined by welding, brazing, or soldering if the surfaces to be joined have been thoroughly cleaned.
• The material should be brazed in the heat treated condition in order to prevent cracking.
• Autogeneous inert gas fusion welding has been employed successfully.
• In any joining operation the effect of joining temperature and time must be considered in relation to its effect on the thermoelastic characteristics of the device.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
[email protected]
www.aesteiron.com
© 2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
www.aesteiron.com
[email protected]