PDF 2

Easy Steps on tyre maintenance: How
to increase tyre life
The present-day tyres are tough, made to confront most things. They can get through a colossal
amount of "abuse". This shows how important they are yet so neglected. However, as indicated
by specialists, ignoring tyres can be very expensive. Therefore, despite their tiptop formation,
tyre maintenance is a key aspect to increase your tyre life.
No matter whatever brand you are using such as ​Yokohama Tyres​, Apollo Tyres, Nankang
tyres, etc. it is very important to maintain your tyre. Tyre maintenance is not rocket science by
any stretch of the imagination. It's just a set of few basic guidelines that can add thousands of
rupees in your pocket which you would otherwise spend on repairing old tyres and buying new
ones. This blog looks at some key tyre maintenance tips which will help you to extend your tyre
life.
Proper inflation levels
The greatest impact on tyre life is made by inflation levels. At ordinary speeds, running tyres at
20 per cent under suggested pressure lessens tyre mileage by 16 per cent and fuel mileage by
2 per cent. Tyres are designed to keep running at specific pressures dependent on the total
load. To decide the right air pressure for your tyres, assemble data on your actual axle loads
and seek reference from tyre load graphs. Standard load chart outlines can be accessed online
on the websites of the most prominent tyre producers. In case, you drive at higher or lower
speeds, utilize the available formulas to make the changes. In a nutshell, higher speeds imply
higher pressures.
Diminish your top speeds
High speeds produce more warmth and quicken tyre wear. Goodyear information demonstrates
that raising highway speeds from 55 mph to 75 mph can lessen total track mileage by 20 per
cent or more. So a tyre that would have given 250,000 kms in tread life at 55 mph will just net
200,000 kms for every tread at 75 mph. The drop is steady as speed rises. That 250,000-mile
tread drops to 237,500 kms at 60 mph; 225,000 kms at 65 mph; and 212,500 kms at 70 mph.
There's a special reward for backing off — efficiency tests have indicated fuel use rises 0.1 mpg
for each mph more than 55 mph. Hence, reducing your speed is a key aspect of tyre
maintenance.
Keep vehicles properly aligned
Unpredictable wear is most generally brought about by poor vehicle alignment. This tyre
maintenance tip is basic science and nothing more. In case that tyres are not running straight
ahead, quickened tread wear takes place on parts of the tyre. To remain over sporadic wear,
the vehicle ought to be aligned on a regular basis. Beginning a genuine alignment program after
ignoring it in the past can expand tyre mileage by as much as 30 per cent.
The Technology and Maintenance Council offers data on successful alignment plans and the
reasons for uncertain wear in distributions accessible online
Mount tyres properly
The rounder or more concentric the tyre, the more it will wear. To lessen tyre run out, tyres must
be mounted on the wheel effectively. For a perfect tyre​ ​maintenance program, the tyres ought to
be correctly mounted to the wheel. Wheels are normally marked to demonstrate the low spot
and tyres are marked to demonstrate their high spot. How the high spot is checked change with
the tyre. Check with tyre producers to learn how they mark their tyres.
The main idea is to take the high spot of the tyre and match it to the low spot of the wheel.
Correct mounting removes the necessity for balancing the tyres.
Tyre rotation
Moving tyres around require some investment and effort. However, if you don't rotate your tyres,
you may not succeed in your tyre maintenance programme. The thought is to abandon rotation
and keep them in one position for the life of the tread. Having said that, smart tyre rotation
stimulates even tread wear and can net additional kms in tread life. A few fleets will run new
steer tyres in the drive position and take off 1/32-to 2/32-inch in tread profundity to build up a
decent wear design. Drive tyres ought to be turned between forwarding and back positions to
prevent wear. Some drive tyres may create heel and toe wear. This can be kept taken care of
by switching their directions.
Check and change worn wheel and suspension parts
These can be the concealed foes of tyre life and must be considered as an important part of
your tyre maintenance programme. A wheel bearing that isn't appropriately torqued can cause
unpredictable tyre wear. Worn shock absorbers can cause wear on treads and an early trip to
the scrap pile. Fleets will regularly hold up until suspension parts are clearly broken or are
leaking before they replace them with the new ones. However, at that particular point, tyre harm
has already happened. Replace shock absorbers and other suspension parts on a regular basis
instead of waiting until they come up short.
Conclusion
The more consistent and regular you are with your tyre maintenance schedule, the longer your
tyres will live. It’s as simple as that. There is nothing technical about it. It requires awareness
and a bit of data collection. It will ultimately reward you with reduced expenses on your tyres.