Leaflet
Transcription
Leaflet
S e c u r i t y / I n f o r m a t i o n Te c h n o l o g y / Te l e c o m m u n i c a t i o n s Multifunctional Integrated Media Gateway CUT-2RI Multifunctional Integrated Media Gateway CUT-2RI is designed for operation as a component of stationary or mobile systems, used to develop automated digital telecommunication networks, integrating radio, telephone and data exchange services. CUT-2RI may be used for the carrying out of the field, stationary fixed, end terminal and transit communication nodes. CUT-2RI advantages CUT – 2RI integrates all the functionality in one housing necessary and sufficient to achieve the system structure construction of the future command vehicle. CUT2RI integrates in on uniform systems all the radios, satellite terminals, computer terminals and endpoint subscribers equipment. CUT – 2RI has a wide functional range of cooperation with the combat field radios. It includes telephone calls between wired and/or radio subscribers, as well as IP advanced data services. On the wired side CUT -2RI has a wide range of paths through the block. Device configuration is customized according to the requirements. The basic version of the device has eight groups of tracts in standards: STANAG 4210, STANAG, 4578, EUROCOM, ISDN PRI, and STANAG 4206. In addition, 4 tracks E1 can be used together by creating a virtual route 4xE1 with 8192 kbit/s data rate. In principle, the scope of standardization used on the wired side is enough to attach to any of the telecommunication system, can be met in the NATO members armed forces, as well as in the civilian infrastructure. 1 Industrial Security Certificate License MSWiA #: B-008/2006 ICP #: W-148/1/2011 NCAGE 1167H FEATURES FEATURES Subscriber lines. Digital tracks. Ethernet interfaces. VoIP telephony. Router/switch functions. Support for the radio stations. Automatic exchange of IP data. Duplex conferences. Power supply: DC 27 V. ISO 9001:2008 AQAP 2110:2009 AQAP 2210:2006 QMS S e c u r i t y / I n f o r m a t i o n Te c h n o l o g y / Te l e c o m m u n i c a t i o n s Equipment switch of 16 - ports Group equipment (electrical interface) SERIAL BUS Equipment switch of 8 - ports Conference bridge equipme Subscriber's digital equipment CA/MB subscriber's equipment Universal subscriber's equipment Radio access equipment (RAP) Group equipment (optical interface) Optical converter equipment IP router equipment v.35 (optical) interface equipment Main Controller VoIP equipment (Gatekeeper) SERIAL BUS Switch and MUX functions Attaching group tracts: STANAG 4210, Eurocom 64…2048 kb/s, G.703, STANAG 4578 i DSS1 ISDN PRI, STANAG 4206. Cooperation with the public telephone exchanges ISDN PRI. Virtual tract configuration 8192 kb/s (4 x E1). Digital and analog subscriber's outfit. Compatibility with Automated Communication System STORCZYK Compliance of CUT-2RI contact block standard with STORCZYK. Attaching devices through Ethernet interface and „U” type connection of STORCZYK system. KenBIT Sp. J. VoIP gate functions CUT-2RI has gatekeeper (H.323) allowing for connections: With other VoIP subscribers, VoIP subscriber – STORCZYK subscriber, VoIP subscriber – ISDN subscriber, VoIP subscriber – radio subscriber (RSP) VHF/HF. Operating the HF/UHF radio station VHF/HF radio access services (RAP function). IP data transmission with accordance to STANAG 5066. Radio router functions. Connection to 4 VHF/HF radio stations. Żytnia 15 lok. 22, 01-014 Warszawa, Poland tel: +48 22 862 43 80 IP router functions Operating the PROT data transfer protocol compliant with STORCZYK (MK-16) system. Operating the V.110/V.120 protocol transmitting the data in ISDN networks. Operating the PPP protocol cooperating with IP routers and RAS servers. Operating the RIP V.1 and V.2, OSPF, BGP routing protocols. Operating the V.35 optical interface with HDLC, Cisco HDLC, PPP encapsulations. Remote management through SNMP V3 protocol. Automatic selection of an alternative route for IP packets. fax: +48 22 862 43 81 www.kenbit.pl [email protected]
Similar documents
Leaflet - KenBIT
receivers, etc.). Cooperation with on-board integrator (BSR-IP, IS-1, CUT-2RI). Cooperation with others KenTEL-1s in order to share resources. Autonomous operation as telephone (with data tra...
More informationLeaflet BITcom
crew of the vehicle and to ensure use of any communication option with
More informationSTORCZYK 2010 Digital Communication System
STORCZYK 2010 Digital Communications System Elements of the System
More information