V-Grooved Fiber Holder Axial Force Sensor

Comments

Transcription

V-Grooved Fiber Holder Axial Force Sensor
8 3AxisNanoPAccess 284-302.qxd
12/5/05
2:00 PM
Page 295
Motion Control
Connectorized Fiber Optic Cable Holders
Translation Stages
The SMA connectorized fiber holder, HFB001 can be used to
secure multimode fiber cables to our family of flexure based
nanopositioners and accessories. The SMA style connector is
almost exclusively used for multimode optical fibers.
HFB001
Rotation Stages
3 Axis Flexure Stages
& Accessories
The ST™ connectorized fiber holder, HFB002 can be used to secure
fiber cables with industry-standard ST™ connectors to the mounting platforms
of nanopositioners and brackets. The ST™ style connector is most often used for
industrial or medical applications that include single mode optical fibers.
The FC connectorized fiber holder, HFB003 can be used
to secure fiber cables with industry-standard FC/PC connectors
to the mounting platforms of our multi-axis flexure stages.
The center of the connector is positioned 12.5 mm above
the platform to provide the appropriate optical axis height.
ITEM#
HFB001*
HFB002*
HFB003*
METRIC ITEM #
HFB001*
HFB002*
HFB003*
$
$
$
$
91.80
91.80
91.80
£
£
£
£
54.00
54.00
54.00
€
€
€
€
81,00
81,00
81,00
¥
¥
¥
¥
15,120
15,120
15,120
Motorized
Mirror Mounts
HFB002
4, 5 & 6-Axis Stages
Drive Electronics
& Auto-Alignment
Actuators &
Adjusters
HFB003
DESCRIPTION
SMA Fiber Optic Cable Mount
ST Fiber Optic Cable Mount
FC Fiber Optic Cable Mount
*Both the Imperial and Metric Models are Equivalent
FC/PC Connectorized Axial Force Sensor
D-Type
Connector
FSC101
■
■
Load Capacity: 30N
Sensitivity: 0.03N
This force sensing cell can be used to position an optical fiber with respect to another device in the direction
of the optical axis. When the fiber makes contact with the device, a force arises that is detected by the cell,
generating an electrical signal that is sent to the actuator controller to indicate that the desired position has
been reached.
For stepper motor and piezoelectric controllers that support this feature please see our extensive Drive
Electronics section that starts on page 327.
ITEM#
METRIC ITEM #
FSC101*
FSC101*
$
$ 967.72
€
£
£
€ 853,88
569.25
¥
DESCRIPTION
¥ 159,390
FC/PC Connectorized Axial Force Sensor
*Both the Imperial and Metric Models are Equivalent
V-Grooved Fiber Holder Axial Force Sensor
■
FSC102
■
Load Capacity: 30 N
Sensitivity: 0.03 N
■
■
Clamps 250µm Fiber Jacket
Two Magnetic Fibers Holders
This force sensing cell is similar to the FC/PC version detailed above, however this
model is used to position a bare optical fiber with respect to another device in the
direction of the optical axis. When the fiber makes contact with the device, a force
arises that is detected by a strain gage. An electrical signal is generated that is
available for the actuator controller to indicate that the desired position has been
reached. Please see our complete selection of Motion Control Electronics featured
on pages 327 through 356.
ITEM#
METRIC ITEM #
$
£
€
FSC102*
FSC102*
$ 722.50
£ 425.00
€ 637,50
¥
¥ 119,000
DESCRIPTION
V-Grooved Fiber Holder Axial Force Sensor
*Both the Imperial and Metric Models are Equivalent
Sales: 973-579-7227
295

Similar documents