Final Program (pdf file)

Transcription

The 8th ASME-JSME
Thermal Engineering Joint Conference
( AJTEC2011 )
Conference Program
March 13 - 17, 2011
Waikiki Beach Marriott Resort & Spa, Honolulu, Hawaii
Co-sponsored by
The Thermal Engineering Division, Japan Society of Mechanical Engineers
and
The Heat transfer Division, American Society of Mechanical Engineers
In cooperation with
The Energy Transport Process Division, American Institute of Chemical Engineers
Announcement from the Chairpersons
The American Society of Mechanical Engineers (ASME) and the Japan Society of Mechanical Engineers (JSME)
have co-developed a successful series of joint conferences on thermal engineering at four-year intervals. AJTEC
2011 is the 8th ASME/JSME Thermal Engineering Joint Conference. The previous conferences in this series were
held in: Honolulu, Hawaii (1983 and 1987); Reno, Nevada (1991); Maui, Hawaii (1995); San Diego, California
(1999); Hawaii Island, Hawaii (2003); and Vancouver, Canada (2007). AJTEC 2011 will be held again in Honolulu
Hawaii.
The Key Themes of AJTEC 2011 are "Fundamental" and "Interdisciplinary" with a vision for the future of
Thermal Engineering.
The 20th century is, in many ways symbolized by the phrases "Division" and "Development". In the early part of
the century, engineers divided systems into their most fundamental elements for purpose of study. As the century
progressed, scientific understanding enabled the enormous development of many new technologies.
In the dawn of the new century, thermal engineers will be required to attain a better understanding of fundamental
phenomena governing complex and integrated mechanical, chemical, and energy systems. As such, we must
increase our efforts to integrate thermal engineering with other disciplines, and broaden our perspective to include
an ever-widening range of time scales (from ultra rapid to long term) and length scales (from nanoscale to global).
Such efforts require a strong collective will from the thermal engineering community to engage new technological
challenges and to collaborate with scientists and engineers from other disciplines to meet these challenges with
unique and innovative solutions. The 21st century has opened the gate for this new direction and the thermal
engineering community appears ready and willing to embrace the challenges that lie ahead.
The objective of the AJTEC 2011 conference is to provide an international forum for the exchange of such new
ideas and direction as described above and the presentation of the latest work in the field. We strongly encourage
attendance and paper submission from sister societies around the globe including those from ASME and JSME.
Koichi Hishida, Keio University, Conference Co-Chair (JSME)
James Klausner, University of Florida, Conference Co-Chair (ASME)
1
2
3
4
5
Floor Plan of the Meeting Area - Paoakalani Tower
Third Floor
Second Floor
6
General Information
Presentation and Audio-Visual Aids
All the presentations except the Keynote Lectures are allotted for 20 minutes including discussion. Each session
room will have a fullcolor liquid crystal projector (LCP). The LCP will be equipped with a connection cable with
D-Sub mini 15-pin male connector for RGB-video input from computers. Note that speakers who wish to use the
LCP must prepare their own computer, presentation software, and additional connectors if needed.
Welcome Reception
On Sunday evening, March 13, 2011, all attendees are invited to the Welcome Reception. The Welcome Reception
will be held at 5:00 pm to 7:00 pm at the Pualeilani Terrace, which is located on the third floor of the Kealohilani
Tower and is connected to the second floor of the Paoakalani Tower.
Conference Banquet
The conference banquet will be at 7:00 pm to 9:00 pm on Wednesday, March 16, 2011. Dinner will be served as a
buffet, with seating provided. The conference banquet will be held at the Kona Moku ballroom. The regular
registration fee includes admission to the banquet.
Conference Breakfast and Lunch
Everyday of the technical sessions, Monday, March 14 through Thursday, March 17, a buffet style conference
breakfast and lunch will be served. All the attendees are invited to the conference breakfast and lunch.
Keynote Lectures
Keynote Lectures will be presented in the Kona Moku ballroom every morning from 9:00 am to 10:20 am.
Keynote Lecturers are as follows:
Keynote 1, 9:00 am - 9:40 am, Monday, March 14
Advanced Power Generation Systems and Related Thermal Engineering Problems, Mamoru Ozawa, Ryosuke
Matsumoto, Hisashi Umekawa (Kansai University, Suita, Osaka, Japan)
Keynote 2, 9:40 am - 10:20 am, Monday, March 14
Surrogate-Based Modeling and Dimension-Reduction Techniques for Thermo-Fluid & Energy Systems,
Young-Chang Cho, Wenbo Du, Amit Gupta, Chien-Chou Tseng, Ann Marie Sastry, Wei Shyy (University of
Michigan, Ann Arbor, MI, United States)
Keynote 3, 9:00 am - 9:40 am, Tuesday, March 15
Two-Phase Micro-Channel Heat Sinks: Theory, Applications and Limitations, Issam Mudawar (Purdue University,
West Lafayette, IN, United States)
Keynote 4, 9:40 am - 10:20 am, Tuesday, March 15
Spacecraft Thermal Management, Bruce Drolen (The Boeing Company, Los Angeles, United States)
Keynote 5, 9:00 am - 9:40 am, Wednesday, March 16
Significance of Micro-Scall Mass Transport Phenomena on Fuel Cells and CO2 Sequestration, Shuichiro Hirai,
Shohji Tsushima, Suguru Uemura (Tokyo Institute of Technology, Tokyo, Japan)
Keynote 6, 9:40 am - 10:20 am, Wednesday, March 16
Solar Thermal Fuel Production, Christian Sattler (German Aerospace Center, Cologne, Koln, Germany), Hans
Muller-Steinhagen (Technical University of Dresden, Dresden, Germany), Martin Roeb, Dennis Thomey, Martina
Neises (German Aerospace Center, Cologne, Koln, Germany)
7
Keynote 7, 9:00 am - 9:40 am, Thursday, March 17
Micro and Extended-Nano Fluidics on Microchip for Chemistry and Bio-Medical Applications, Takehiko
Kitamori (The University of Tokyo, Tokyo, Japan)
Donald Q. Kern Award Lecture
In honor of Donald Q. Kern, pioneer in process heat transfer, the AIChE Transport Energy Process Division
recognizes an individual's expertise in a given field of heat transfer or energy conversion. Selection criteria
include:
1. Significant contributions to applied heat transfer or conversion or in the translation of research results into
useful technological applications.
2. The recipient will prepare a written review article to be published in the AIChE Journal.
The 2010 Donald Q. Kern award recipient is Mohamed El-Genk, Regents' Professor, Chemical, Nuclear, and
Mechanical Engineering, University of New Mexico.
Lecture from Prof. Mohamed El-Genk will be held on 9:40 - 10:20 am, Thursday, March 17 at the Kona Moku
ballroom. Title of the lecture is:
Nucleate Boiling Enhancements on Porous Graphite and Micro-Porous and Macro-Finned Copper Surfaces
8
Organizing Committee
Chair Persons:
Koichi Hishida, Keio University
James Klausner, University of Florida
Secretary-General:
Isao Satoh, Tokyo Institute of Technology
Committee Members:
Amanie Abdelmessih, Saint Martin's University
Alexis Abramson, Case Western Reserve University
Fumiteru Akamatsu, Osaka University
Kalyan Annamalai, Texas A&M University
Julie Asfia, Boeing Company
Debjyoti Banerjee, Texas A&M University
Alex Brown, Sandia National Laboratories
Qingjun (Steve) Cai, Teledyne Scientific
Takemi Chikahisa, Hokkaido University
Yaroslav Chudnovsky, Gas Technology Institute
Baratunde Cola, Georgia Institute of Technology
Ingrid Cotoros, Lockheed Martin
John Crepeau, University of Idaho
Hirofumi Daiguji, The University of Tokyo
Mohamed El-Genk, University of New Mexico
Ofodike A. Ezekoye, University of Texas
Yoshimichi Hagiwara, Kyoto Institute of Technology
Tatsuya Hasegawa, Nagoya University
Leiyong Jiang, National Research Council Canada
Amir Jokar, ThermoFluids Tech
Kris L Jorgensen, The Babcock & Wilcox Co.
Yasuo Kawaguchi, Tokyo University of Science
Masahiro Kawaji, City College of New York
Hideaki Kobayashi, Tohoku University
Atsuki Komiya, Tohoku University
Shigeru Koyama, Kyushu University
Tomoaki Kunugi, Kyoto University
Ben Q. Li, University of Michigan
Wei Li, Zhejiang University
Wojciech Lipinski, University of Minnesota
Raj M. Manglik, University of Cincinnati
Kaoru Maruta, Tohoku University
Shigeo Maruyama, The University of Tokyo
Yukihiko Matsumura, Hiroshima University
Alan McGaughey, Carnegie Mellon University
Kunal Mitra, Florida Institute of Technology
Koji Miyazaki, Kyushu Institute of Technology
Michael Modest, UC Merced
Arun Muley, Koch Heat Transfer
Yuji Nagasaka, Keio University
Kazuyoshi Nakabe, Kyoto University
Vinod Narayanan, Oregon State University
Arvind Narayanaswamy, Columbia University
Chang Oh, Idaho National Laboratory
Taku Ohara, Tohoku University
Keunhan (Kay) Park, University of Rhode Island
Yoav Peles, Rensselaer Polytechnic Institute
Leslie Phinney, Sandia National Laboratories
Joel Plawsky, Rensselaer Polytechnic Institute
T.S. Ravigururajan, Wichita State University
Shripad T. Revankar, Purdue University
Xiulin Ruan, Purdue University
Takushi Saito, Tokyo Institute of Technology
Jun Sakakibara, University of Tsukuba
Atsushi Sakurai, Niigata University
Laura Schaefer, University of Pittsburgh
Mitra Sexton, Knolls Atomic Power Laboratory
S.A. Sherif, University of Florida
Jessica Shi, Electric Power Research Institute
Masahiko Shibahara, Osaka University
Naoki Shikazono, The University of Tokyo
Ryo Shirakashi, The University of Tokyo
Ali Siahpush, Idaho National Laboratory
Alex da Silva, University of Texas at Austin
Manohar Sohal, Idaho National Laboratory
Kazuhiro Suga, Osaka Prefecture University
Yuji Suzuki, The University of Tokyo
Shigeru Tada, National Defense Academy
Masato Tagawa, Nagoya Institute of Technology
Yasuyuki Takata, Kyushu University
Mamoru Tanahashi, Tokyo Institute of Technology
Eiji Tomita, Okayama University
Shohji Tsushima, Tokyo Institute of Technology
Erol Ulucakli, Lafayette College
Xinwei Wang, Iowa State University
Brent Webb, Brigham Young University
Jun Yamada, Shibaura Institute of Technology
Kenji Yasuoka, Keio University
Theodore Zannis, Hellenic Naval Academy
Zhuomin Zhang, Georgia Institute of Technology
Chenn Zhou, Purdue University Calumet
9
Technical Sessions
Monday, March 14
Opening Remarks
Room: Kona Moku
8:50-9:00, Monday, March 14
Session Organizer: Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan)
Track 4: Keynote Lectures
Track Chair: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan)
Track Co-Chair: James Klausner (Univesity of Florida, Gainesville, FL, United States)
Room: Kona Moku
9:00-9:40, Monday, March 14
4-1-3 Keynote - 1
Session Organizer: Koichi Hishida (Keio University, Yokohama, Japan)
AJTEC2011- 44427
Advanced Power Generation Systems and Related Thermal Engineering Problems, Mamoru Ozawa,
Ryosuke Matsumoto, Hisashi Umekawa (Kansai University, Suita, Osaka, Japan)
Room: Kona Moku
9:40-10:20, Monday, March 14
4-1-4 Keynote - 2
Session Organizer: Renwei Mei (University of Florida, Gainesville, FL, United States)
AJTEC2011-44034
Surrogate-Based Modeling and Dimension-Reduction Techniques for Thermo-Fluid & Energy Systems,
Young-Chang Cho, Wenbo Du, Amit Gupta, Chien-Chou Tseng, Ann Marie Sastry, Wei Shyy (University of
Michigan, Ann Arbor, MI, United States)
Track 1: Fundamentals of Heat and Mass Transfer
Track Chair: Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan)
Track Co-Chair: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States)
Track Co-Chair: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)
Room: Honolulu
10:40-12:00, Monday, March 14
1-5-1 Radiative Heat Transfer - 1
Session Organizer: Michael Modest (UC Merced, Merced, CA, United States)
AJTEC2011-44011
A Simple Physical Approach to Model Spectral Radiative Properties of Semi-Transparent Dispersed
Materials, Leonid Dombrovsky (Joint Institute for High Temperatures, Moscow, Russia), Dominique
Baillis (Université de Lyon, CNRS, INSA-Lyon, CETHIL, UMR5008, Lyon, France)
AJTEC2011-44332
Measurements of Spectral Transmittance of Porous Cerium Dioxide Media in the Range 900-1,700 nm,
Krithiga Ganesan, Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)
AJTEC2011-44166
10
Radiative Property Measurements of Oxy-Fuel Flames, Clinton R. Bedick, Stephen K. Beer, Kent H.
Casleton, Benjamin T. Chorpening (US Department of Energy National Energy Technology Laboratory,
Morgantown, WV, United States), David W. Shaw (Department of Engineering, Beaver Falls, PA, United
States), M. Joseph Yip (US Department of Energy National Energy Technology Laboratory, Morgantown,
WV, United States)
AJTEC2011-44622
Control of Radiative Properties of Coatings Pigmented with Fe2O3 Nanoparticles, Hiroki Gonome, Mehdi
Baneshi, Atsuki Komiya, Shigenao Maruyama (Tohoku University, Sendai, Miyagi, Japan)
Room: Honolulu
13:40-15:00, Monday, March 14
1-5-2 Radiative Heat Transfer - 2
Session Organizer: Brent Webb (Brigham Young University, Provo, UT, United States)
AJTEC2011-44131
Hybrid SN-PN Solution of the Radiative Transfer Equation in Multi-Dimensional Media, Maathangi
Sankar, Sandip Mazumder (Ohio State University, Columbus, OH, United States)
AJTEC2011-44487
Importance Sampling in Monte Carlo Ray Tracing Solutions Applied to Radiation in Hypersonic Entry
Flows, Andrew Feldick (Pennsylvania State University, University Park, PA, United States), Michael
Modest (University of California, Merced, Merced, CA, United States)
AJTEC2011-44515
Thermal Radiation From a Photonic Crystal of Silica-Particles, Nozomi Ikemachi, Ryota Nakano, Shohei
Kurogi, Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)
AJTEC2011-44523
Effect of Skin Structure Change with Age on Optical Characteristics of Human Skin, Jun Yamada, Tatsuya
Ogawa, Hirokazu Kawai (Shibaura Institute of Technology, Tokyo, Japan), Hironobu Yoshikawa, Sadaki
Takata (Shiseido Co., LTD, Tokyo, Japan)
Room: Kou
10:40-12:00, Monday, March 14
1-8-1 Measurement - I
Session Organizer: Atsuki Komiya (Tohoku University, Sendai, Miyagi, Japan)
AJTEC2011-44271
Measurement Technique of In-Plane Thermal Resistance of PCB, Tomoyuki Hatakeyama, Masaru
Ishizuka, Shinji Nakagawa, Yuta Nakano (Toyama Prefectural University, Toyama, Japan), Masataka
Hirokawa (Oki Printed Circuit, Niigata, Japan), Toshio Tomimura (Kumamoto University, Kumamoto,
Japan)
AJTEC2011-44185
Uncertainties on HTC Measurement of Water Spray Quenching of Aluminum Alloys, Saeed Bikass, Bjørn
Andersson, Artem Pilipenk (Sintef and University of Oslo, Oslo, Norway)
AJTEC2011-44206
Dew and Frost Points Measurements and Estimation for Residual Gases in High-Pressure Hydrogen,
Kenji Ishida, Masataka Kosaka, Masanori Monde (Saga University, Saga, Japan)
AJTEC2011-44403
Visualization of Dispersed Phase Flow in Centrifugal Extractor Using Taylor-Couette Vortex Flow,
Hideharu Takahashi, Hiroshige Kikura, Kenji Takeshita, Masanori Aritomi (Tokyo Institute of
Technology, Tokyo, Japan)
Room: Kou
13:40-15:00, Monday, March 14
1-8-4 Measurement - II
Session Organizer: Jun Sakakibara (University of Tsukuba, Tsukuba, Japan)
AJTEC2011-44370
11
Measurement of Current-Density in PEFC with NMR Sensors, Kuniyasu Ogawa, Yasuo Yokouchi (Keio
University, Yokohama, Japan), Tomoyuki Haishi (MRTechnology, Tsukuba, Japan), Kohei Ito (Kyushu
University, Fukuoka, Japan)
AJTEC2011-44415
Thermal Conductivity Measurement of Hydrogen at High Pressure and High Temperature, Koichi Kimura,
Shogo Moroe (Kyushu University, Fukuoka, Japan), Peter Lloyd Woodfield (Griffith University, Southport,
Qld, Australia), Jun Fukai (Kyushu University, Fukuoka, Japan), Kan’ei Shinzato (National Institute of
Advanced Industrial Science and Technology, Nishi-ku, Fukuoka, Japan), Masamichi Kohno (Kyushu
University, Fukuoka, Japan), Motoo Fujii (National Institute of Advanced Industrial Science and
Technology, Fukuoka, Nishi-ku, Japan), Yasuyuki Takata (Kyushu University, Fukuoka, Japan)
AJTEC2011-44582
Flow Pattern Dynamics Around a Vertical Dividing Junction, M. B. Alamu, B.J. Azzopardi (University of
Nottingham, Nottingham, United Kingdom)
AJTEC2011-44499
Unsteady Flow Structure Behind a Heated Cylinder Measured by Time-Resolved PIV with
Thermo-Couple Sensing, Yuji Ohta, Takuya Mukoyama, Koichi Hishida (Keio University, Yokohama,
Japan)
Room: Kou
15:20-16:40, Monday, March 14
1-8-2 Instrumentation - I
Session Organizer: Koichi Hishida (Keio University, Yokohama, Japan)
Session Co-Organizer: Shripad T. Revankar (Purdue University, West Lafayette, IN, United States)
AJTEC2011-44120
Heat Source Localization Sensitivity Analyses for an Ultrasonic Sensor Array, Michael R. Myers
(Vanderbilt University, Nashville, TN, United States), Ariosto B. Jorge (Federal University of Itajuba,
Itajuba, MG, Brazil), D. G. Walker (Vanderbilt University, Nashville, TN, United States), Mark J. Mutton
(Industrial Measurement Systems, Inc., Aurora, IL, United States)
AJTEC2011-44243
Ultrasound Characteristics in High-Temperature Fluid, Tomonori Ihara, Hiroshige Kikura, Yasushi
Takeda (Tokyo Institute of Technology, Tokyo, Japan), Eiji Ochi, Akira Inagaki (Japan Nuclear Fuel
Limited, Aomori, Japan)
AJTEC2011-44437
Response Compensation Scheme for Constant-Current Hot-Wire Anemometry Based on Frequency
Response Analysis, Kazuhide Kaifuku, Soe Minn Khine, Tomoya Houra, Masato Tagawa (Nagoya
Institute of Technology, Nagoya, Japan)
AJTEC2011-44442
Acceleration of Recursive Cross-Correlation PIV using Multiple GPUs, Shuhei Tarashima, Satoshi
Someya, Koji Okamoto (The University of Tokyo, Kashiwa, Chiba, Japan)
Room: Waikiki 1
10:40-12:00, Monday, March 14
1-3-2 Bubble Dynamics in Boiling Phenomena - 1
Session Organizer: David Christopher (Tsinghua University, Beijing, China)
Session Co-Organizer: Ichiro Ueno (Tokyo University of Science, Noda, Chiba, Japan)
AJTEC2011-44051
Lower Limit of Homogeneous Nucleation Boiling Explosion in Water During Linear Boundary Heating
and Contact with High Temperature Surface, Mohamamd Nasim Hasan, Masanori Monde, Yuichi
Mitsutake (Saga University, Saga, Japan)
AJTEC2011-44429
A New Empirical Model for Bubble Growth: Boiling in an Infinite Medium and on a Wall at High
Superheat, Herman D. Haustein (RWTH, Aachen, Germany), Georg F. Dietze, Reinhold Kneer (RWTH
Aachen University, Aachen, Germany)
12
AJTEC2011-44087
Extension of the Full Cavitation Model for Cryogenic Fluids, H. Q. Yang (CFD Research Corp., Huntsville,
AL, United States)
Room: Waikiki 1
13:40-15:00, Monday, March 14
1-3-8 Bubble Dynamics in Boiling Phenomena - 2
Session Organizer: Hiroyasu Ohtake (Kogakuin University, Tokyo, Japan)
Session Co-Organizer: Deyu Li (Vanderbilt University, Nashville, TN, United States)
AJTEC2011-44153
Flushing of Non-Condensable Gases by Saturated Steam, Rajesh Patel, Raivat Patel, Chao Zhu (New
Jersey Institute of Technology, Newark, NJ, United States), Chao-Hsin Lin (Boeing Commercial
Airplanes, Seattle, WA, United States)
AJTEC2011-44324
Molecular Dynamics Simulations of Homogeneous and Heterogeneous Thermal Bubble Nucleation using
NPT Systems, Min Chen, Yunfei Chen (Southeast University, Nanjing, Jiangsu, China), Juekuan Yang,
Yandong Gao, Deyu Li (Vanderbilt Unviersity, Nashville, TN, United States)
AJTEC2011-44336
Nucleate Boiling Bubble Dynamics in a PDMS Microchannel with a Single Nucleation Site, Haojie Wang,
China, Xipeng Lin, David Christopher (Tsinghua University, Beijing, China)
AJTEC2011-44595
Condensation/Collapse of Vapor Bubble Injected to Subcooled Pool, Ichiro Ueno, Ryota Hosoya,
Chungpyo Hong (Tokyo Univeristy of Science, Chiba, Japan)
Room: Waikiki 1
15:20-16:40, Monday, March 14
1-3-9 Heat Pipe and Thermosyphon
Session Organizer: Joel Plawsky (Rensselaer Polytechnic Institute, Troy, NY, United States)
Session Co-Organizer: Yoshiyuki Abe (AIST, Tsukuba, Ibaraki, Japan)
AJTEC2011-44360
Utilization of Advanced Working Fluids in Heat Pipes, Sean Reilly, Ivan Catton (University of California,
Los Angeles, Los Angeles, CA, United States)
AJTEC2011-44244
A Design for Loop Thermosyphon Including Effect of Non-Condensable Gas, Hiroyuku Toyoda,
Tadakatsu Nakajima, Yoshihiro Kondo (Mechanical Engineering Research Labo, Hitachi, Ltd.,
Hitachinaka, Ibaraki, Japan), Akio Idei, Shigemasa Sato (Enterprise Server Division, Hitachi, Ltd.,
Hadano, Kanagawa, Japan)
AJTEC2011-44312
Investigating the Performance of Bi-Porous Disk-Shaped Wick with the Restricted Vapor Space Via
Developing an Electric Analogue Method, ladan Amouzegar, Sean Reilly, Ivan Catton (University of
California, Los Angeles, Los Angeles, CA, United States)
AJTEC2011-44646
Development and Experimental Validation of a Micro-Nano Thermal Ground Plane, Peter de Bock, Shakti
Chauhan, Pramod Chamarthy, Chris Eastman, Boris Russ, Stanton Weaver, Bryan Whalen, Tao Deng (GE
Global Research Center, Niskayuna, NY, United States), Frank Gerner (University of Cincinnati,
Cincinnati, OH, United States), Douglas Johnson, David Courson (Air Force Research Laboratory,
Dayton, OH, United States), Quinn Leland, Kirk L. Yerkes (Air Force Research Laboratory, Wright
Patterson AFB, OH, United States)
Room: Waikiki 2
10:40-12:00, Monday, March 14
1-2-3 Computational Heat and Mass Transfer (Mixed & Natural Convection)
Session Organizer: K. Suga (Osaka Prefecture University, Sakai, Osaka, Japan)
13
AJTEC2011-44419
Linear Stability Analysis for the Onset of Convection During Microwave Heating of Samples Confined
within Horizontal Plates, Tanmay Basak, Madhuchhanda Bhattacharya (Indian Institute of Technology
Madras, Chennai, Tamilnadu, India)
AJTEC2011-44420
Numerical Visualization of Heat Flow and Thermal Mixing in Various Differentially Heated Square
Cavities Using Bejan's Heatlines, Tanmay Basak, Ram Satish Kaluri (Indian Institute of Technology
Madras, Chennai, Tamilnadu, India)
AJTEC2011-44204
Marangoni Convection in Water Isopropanol Mixtures in the Presence of Soret Effect, Ziad Saghir, Md
Abdur Rahman (Ryerson University, Toronto, ON, Canada)
AJTEC2011-44531
Heat Flow Visualization for Natural Convection in Rhombic Enclosures: Bejan's Heatline Approach,
Anandalakshmi R, Tanmay Basak (Indian Institute of Technology Madras, Chennai, Tamilnadu, India)
Room: Waikiki 2
13:40-15:00, Monday, March 14
1-2-8 Computational Heat and Mass Transfer (Industrial Applications) - 1
Session Organizer: Youhei Takagi (Osaka University, Toyonaka, Osaka, Japan)
AJTEC2011-44619
Parametric Fin Array Optimization for Radial Flux Machines Considering Time Varying Loads, Andrew
Semidey, J Rhett Mayor (Georgia Tech, Atlanta, GA, United States)
AJTEC2011-44638
A 3D Numerical Simulation of a Cylindrical Towel Heater with Symmetric and Asymmetric Heating,
Daniel Murray, Jose L. Lage (Southern Methodist University, Dallas, TX, United States)
AJTEC2011-44081
The Model of Temperature Field and Chemical Heterogeneity of Solidifying Ductile-Cast-Iron Roller,
Jana Dobrovska (VSB-Technical University Ostrava, Faculty of Metallurgy and Materials Engineering,
Ostrava, Czech Republic), Frantisek Kavicka, Karel Stransky, Bohumil Sekanina (Brno University of
Technology, Brno, Moravia, Czech Republic)
AJTEC2011-44021
Space-Time-Structure Map for as Cast Massive Rolls, Waldemar Wolczynski (Institute of Metallurgy and
Materials Science, KRAKÓW, Poland), Bogusz Kania (AGH University of Science and Technology,
KRAKÓW, Poland), Wojciech Wajda (Institute of Metallurgy and Materials Science, KRAKÓW, Poland),
Miroslaw Kostrzewa (ECO-HARPOON - Ecological Technologies Coy Ltd, WARSZAWA, Poland)
Room: Waikiki 2
15:20-16:40, Monday, March 14
1-2-14 Computational Heat and Mass Transfer (Industrial Applications) - 2
Session Organizer: Sandip Mazumder (Ohio State University, Columbus, OH, United States)
Session Co-Organizer: Tanmay Basak (Indian Institute of Technology Madras, Chennai, Tamilnadu, India)
AJTEC2011-44013
Common Currency for System Integration of High Intensity Energy Subsystems, David Pratt, David
Moorhouse (USAF, WPAFB, OH, United States)
AJTEC2011-44058
Numerical Optimization of the Casting of Ceramic Material Eucor, Frantisek Kavicka (Brno University of
Technology, Brno, Moravia, Czech Republic), Jana Dobrovska (VSB-Technical University Ostrava,
Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic), Karel Stransky, Bohumil
Sekanina, Josef Stetina (Brno University of Technology, Brno, Czech Republic)
AJTEC2011-44270
Numerical Investigation of the Thermal Behavior in a Hydrogen Tank During Fast Filling Process, Youhei
Takagi (Osaka University, Toyonaka, Osaka, Japan), Naoya Sugie, Kazuhiro Takeda (Shizuoka University,
Hamamatsu, Japan), Yasunori Okano (Osaka University, Toyonaka, Osaka, Japan), Tooru Eguchi,
14
Kazuyuki Hirota (Suzuki Motor Corporation, Hamamatsu, Shizuoka, Japan)
AJTEC2011-44298
Effect of a Pair of Horizontal Frame Members on the Convective Heat Transfer with Laminar and
Turbulent Flow from a Recessed Window to a Room, Patrick Oosthuizen (Queen’s University, Kingston,
ON, Canada), David Naylor (Ryerson University, Toronto, ON, Canada)
Room: Waikiki 3
10:40-12:00, Monday, March 14
1-1-1 Enhanced Convection - 1
Session Organizer: Amanie Abdelmessih (Saint Martin’s University, Lacey, WA, United States)
Session Co-Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States)
Session Co-Organizer: Kyoji Inaoka (Doshisha University, Kyoto, Japan)
AJTEC2011-44020
Convective Heat Transfer Enhancement in Nanofluids: Real Anomaly or Analysis Artifact?, Jacopo
Buongiorno, Lin-wen Hu (Massachusetts Institute of Technology, Cambridge, MA, United States),
Naveen Prabhat (3/17 Vivek Khand Gomti Nagar, Uttar Pradish, India)
AJTEC2011-44049
Influence of Particle Alignment on Thermal Diffusivity in Transformer Cores Made of Polymer Bonded
Soft Magnetic Composites, Mathias Anhalt, Bernd Weidenfeller (Clausthal University of Technology,
Clausthal-Zellerfeld, Germany)
AJTEC2011-44054
Correlation Between Thermal Diffusivity and Dynamic Mechanical Properties of Soft Magnetic Particle
Filled Thermoplastic Composites, Stefan Kirchberg, Mathias Anhalt, Bernd Weidenfeller (Clausthal
University of Technology, Clausthal-Zellerfeld, Niedersachsen, Germany)
AJTEC2011-44127
Detailed Heat Transfer Measurements Inside Rotating Ribbed Channels Using the Transient Liquid
Crystal Technique, Justin Lamont, Srinath Ekkad (Virginia Tech, Blacksburg, VA, United States)
Room: Waikiki 3
13:40-15:00, Monday, March 14
Session Organizer: Qiusheng Liu (Kobe University, Kobe, Japan)
AJTEC2011-44128
An Annular Impinging Jet Alternated by Pulse-Modulated Synthetic Jets, Zdenek Travnicek, Vaclav Tesar
(Institute of Thermomechanics AS CR, Prague 8, Czech Republic)
AJTEC2011-44161
Film-Cooling Performance of Anti-Vortex Hole on a Flat Plate, Christopher LeBlanc, Diganta Narzary,
Srinath Ekkad (Virginia Polytechnic Institute and State University, Blacksburg, VA, United States)
AJTEC2011-44245
Numerical Predictions of Thermal and Hydraulic Performances of Heat Sinks with Enhanced Heat
Transfer Capability, Feng Zhou (Southeast University, Nanjing, Jiangsu, China), Nicholas Hansen, Ivan
Catton (University of California, Los Angeles, Los Angeles, CA, United States)
AJTEC2011-44247
VAT Based Modeling of Plate-Pin Fin Heat Sink and Obtaining Closure from CFD Solution, Feng Zhou
(Southeast University, Nanjing, Jiangsu, China), Nicholas Hansen, Ivan Catton (University of California,
Los Angeles, Los Angeles, CA, United States)
Room: Waikiki 3
15:20-16:40, Monday, March 14
Session Organizer: Kazuya Tatsumi (Kyoto University, Kyoto, Japan)
AJTEC2011-44254
Heat Transfer Augmentation and Suppression in Optimal Rotating Cylinders in Cross-Flow, Tunde
15
Bello-Ochende, Josua P. Meyer, Oluseun I. Ogunronbi (University of Pretoria, Preotia, Gauteng, South
Africa)
AJTEC2011-44266
Heat Transfer Enhancement by Means of a Rotation Cylinder, Daiki Hirawa, Kyoji Inaoka, Mamoru
Senda (Doshisha University, Kyotanabe, Kyoto, Japan)
AJTEC2011-44555
Experimental Analysis of the Single-Phase Heat Transfer and Friction Factor Inside the Horizontal
Internally Micro-Fin Tube, Hou Kuan Tam, Lap Mou Tam (University of Macau, Macau, China), Afshin J.
Ghajar (Oklahoma State University, Stillwater, OK, United States)
AJTEC2011-44495
Investigation of Circular Water Jet Impingement Heat Transfer, Cuicui Liu, Zeyi Jiang, Xinxin Zhang
(University of Science and Technology Beijing, Beijing, China), Qiang Ma, Yusheng Sun (China Aviation
Planning and Construction Development Co, LTD, Beijing, China)
Track 2: Combustion and Energy Systems
Track Chair: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan)
Track Co-Chair: S.A. Sherif (University of Florida, Gainesville, FL, United States)
Track Co-Chair: Mohamed El-Genk (University of New Mexico, Albuquerque, United States)
Room: Kona Moku C
10:40-12:00, Monday, March 14
2-2-1 Heat and Mass Transfer in Combustion Systems I - Gasification Session Organizer: Kaoru Maruta (Tohoku University, Sendai, Japan)
Session Co-Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)
AJTEC2011-44261
Experimental Study on Polymer Pyrolysis in High-Temperature Air Diluted by H2O an CO2 Using
Stagnation-Point Flow, Yasuhiro Ogami, Makoto Mori, Kentaro Yoshinaga, Hideaki Kobayashi (Institute
of Fluid Science, Tohoku University, Sendai, Japan)
AJTEC2011-44338
Char Y Tar Production from Dairy Biomass Gasification Using Air-Steam for Partial Oxidation, Gerardo
Gordillo (Los Andes University, Bogota, Cundinamarca, Colombia), Kalyan Annamalai (Texas A&M
University, College Station, TX, United States)
AJTEC2011-44308
Comparison of Models Used to Predict the Gas Composition of Mixtures Produces by Gasification of Wax
Palm Husk Using Airsteam for Partial Oxidation, Maria Fernanda Contreras, Gerardo Gordillo (Los
Andes University, Bogota, Cundinamarca, Colombia)
AJTEC2011-44307
Modeling and Simulation of Gasification of Indian Coal and Pet-Coke, Pushpavanam Subramaniam (I.I.T
Madras, Chennai, Tamil Nadu, India), Ankit Bhatnagar (Reliance Industries Limited, Jamnagar, Gujrat,
India)
Room: Kona Moku C
13:40-15:00, Monday, March 14
2-2-2 Heat and Mass Transfer in Combustion Systems II - Flame Dynamics Session Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)
Session Co-Organizer: Yasuhiro Ogami (Institute of Fluid Science, Tohoku University, Sendai, Japan)
AJTEC2011-44181
Numerical Simulation on the Instability of Cylindrically Expanding Premixed Flames with Radiative Heat
Loss at Low Lewis Numbers, Satoshi Kadowaki, Takafumi Kusakai (Nagaoka University of Technology,
Nagaoka, Niigata, Japan)
AJTEC2011-44222
Flame Fractal Dimension Induced by Hydrodynamic Instability, Yukari Wada, Kazunori Kuwana
16
(Yamagata University, Yonezawa, Yamagata, Japan)
AJTEC2011-44477
Internal Fire Whirls Induced by Pool Fire in a Vertical Shaft, W.K. Chow (The Hong Kong Polytechnic
University, Hong Kong, China), Yan Huo, Ye Gao (Harbin Engineering University, Heilongjiang, China)
AJTEC2011-44250
Experimental Study on Characteristics of Methane-Coal Dust Mixture Explosion and Its Mitigation by
Ultra-Fine Water Mist, Hongli Xu, Xishi Wang, Rui Gu, Heping Zhang (University of Science &
Technology of China, Hefei, Anhui, China)
Room: Kona Moku C
15:20-15:40, Monday, March 14
2-2-3 Heat and Mass Transfer in Combustion Systems III - Novel Gaseous Combustion Session Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)
Session Co-Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)
AJTEC2011-44216
The Effect of Distance Between Fuel and Oxidizer Nozzles on NOx Emission from High Temperature Air
Combustion, Yuzuru Nada, Yasutomo Zenman, Takahiro Ito, Susumu Noda (Toyohashi University of
Technology, Toyohashi, Aichi, Japan)
AJTEC2011-44143
Performance Tests for a Dry Low NOx Combustor Development, Hyung-mo Kim, Poo-min Park,
Soo-seok Yang (Korea Aerospace Research Institute, Daejeon, Korea (Republic)), Young-sung Ko
(Chungnam National University, Daejeon, Korea (Republic))
AJTEC2011-44042
Investigation of the Working Processes in a Gas Turbine Combustor with Steam Injection, Serhiy Serbin,
Anna Mostipanenko (National University of Shipbuilding, Mikolayiv, Ukraine), Igor Matveev (Applied
Plasma Technologies, McLean, VA, United States)
Room: Milo III
10:40-12:00, Monday, March 14
2-4-1 Heat and Mass Transfer in Energy Devices I - Fuel Cell 1Session Organizer: Yutaka Tabe (Hokkaido University, Sapporo, Hokkaido, Japan)
AJTEC2011-44416
Influence of Cell Components Structure on Coupling Phenomena in Single Cell of Polymer Electrolyte
Fuel Cell, Akira Nishimura, Atsushi Morimoto, Shigeki Tanaka, Atsushi Oshima, Masafumi Hirota (Mie
University, Tsu, Mie, Japan), Eiji Tohma, Yukio Kimura, Masahiko Narita (TOHO GAS Co., LTD., Tokai,
Aichi, Japan)
AJTEC2011-44369
Improvement of PEFC Cell Performance with a Movable Rib, Hirofumi Tanigawa, Ryoji Hakataya,
Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Japan)
AJTEC2011-44549
Measurement of Water, Temperature and Current Distributions in Anode of Polymer Electrolyte Fuel Cell
During Low Humidity Operation, Kosuke Nishida, Yoma Yokoi, Kazumasa Umed (Kyoto Institute of
Technology, Kyoto, Japan), Shohji Tsushima, Shuichiro Hirai (Tokyo Institute of Technology, Tokyo,
Japan)
AJTEC2011-44510
Analysis of Mass Transport Loss in PEMFC Induced by Rib/Channel Geometry, Yuichiro Tabuchi,
Takeshi Shiomi, Yosuke Fukuyama, Osamu Aoki, Norio Kubo, Kazuhiko Shinohara (Nissan Motor Co.,
Ltd, Yokosuka, Kanagawa, Japan)
Room: Milo III
13:40-15:00, Monday, March 14
2-4-2 Heat and Mass Transfer in Energy Devices II - Fuel Cell 217
Session Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)
Session Co-Organizer: Akira Nishimura (Mie University, Tsu, Mie, Japan)
AJTEC2011-44525
Measurements of Heat and Mass Transport Characteristics Through PEMFC GDL, Takuto Araki,
Nobuyoshi Tachibana, Haruki Kaneko, Koichi Ota (Yokohama National University, Yokohama,
Kanagawa, Japan)
AJTEC2011-44517
Microscopic Observation of Ice Distribution in PEM Fuel Cell at Cold Start, Yutaka Tabe, Masataka Saito,
Ryosuke Ichikawa, Takemi Chikahisa (Hokkaido University, Sapporo, Hokkaido, Japan)
AJTEC2011-44481
Investigation of Liquid Water Behaviors in Carbon Paper GDL for PEMFCs by Soft X-Ray Radiography,
Shohji Tsushima, Takashi Sasabe, Shuichiro Hirai (Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44364
Structural Effects of Cathode Catalyst Layer on the Performance of PEFC, Hidetoshi Matsuda (Tokyo
institute of technology, Meguro-ku, Tokyo, Japan), Atsushi Ohma (Nissan Research Center, Meguro-ku,
Tokyo, Japan), Kazuyoshi Fushinobu, Ken Okazaki (Tokyo institute of technology, Meguro-ku, Tokyo,
Japan)
Room: Milo III
15:20-16:40, Monday, March 14
2-4-4 Heat and Mass Transfer in Energy Devices IV -Micro & Nano Scale Phenomena in Energy DevicesSession Organizer: Shohji Tsushima (Tokyo Institute of Technology, Tokyo, Japan)
Session Co-Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)
AJTEC2011-44365
Fuel Gas Production by Plasma in a Microwave Oven at Atmospheric Pressure, Shinfuku Nomura (Ehime
University, Matsuyama, Japan), Andi Erwin Eka Putra (Hasanuddin University, Makassar, Indonesia),
Hiromichi Toyota, Shinobu Mukasa, Hiroshi Yamashita (Ehime University, Matsuyama, Japan)
AJTEC2011-44620
Experimental Analysis of Thermal and Electric Transport Characteristics of Nano-Gaps, Kohei Ito,
Tomoaki Hagio (Kyushu University, Fukuoka, Japan), Akira Matsuo, Yasushi Iwaisako (Nippon Tungsten
Co., Ltd., Miyaki-gun, Kiyama-cho, Japan), Osamu Nakabeppu (Meiji University, Kawasaki, Kanagawa,
Japan)
AJTEC2011-44633
Performance Characterization of an Microscale Integrated Combustor Oil Heat Exchanger, Mohammad
Ghazvini, Vinod Narayanan (Oregon State University, Corvallis, OR, United States)
AJTEC2011-44450
Numerical Simulations versus Experimental Data for a Pyroelectric Energy Converter Harvesting Waste
Heat, Brian A. James, Ashcon Navid, Raylene C. Moreno, Laurent Pilon (University of California, Los
Angeles, Los Angeles, CA, United States)
Track 3: Micro/Nano Scale Phenomena
Track Chair: Shigeo Maruyama (The University of Tokyo, Tokyo, Japan)
Track Co-Chair: Taku Ohara (Tohoku University, Sendai, Japan)
Track Co-Chair: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States)
Track Co-Chair: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)
Room: Kona Moku A
10:40-12:00, Monday, March 14
3-2-1 Transport Phenomena in Nanoscale Systems for Enhanced Energy Transfer
Session Organizer: Arvind Narayanaswamy (Columbia University, United States)
Session Co-Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan)
AJTEC2011-44607
18
Heat Conduction Effect on Oscillating Heat Pipe Operation, Chris Smoot, Corey Wilson, Hongbin Ma
(University of Missouri, Columbia, MO, United States), Larry Greenberg (Northrop Grumman
Corporation, baltimore, MD, United States)
AJTEC2011-44642
Specification of Micro-Nanoscale Radiative Patterns Using Inverse Analysis for Increasing Solar Panel
Efficiency, Shima Hajimirza (The University of Texas at Austin, Austin, TX, United States), Georges El
Hitti (Mines ParisTech, Paris, Ile de France, France), Alex Heltzel, John Howell (The University of Texas
at Austin, Austin, TX, United States)
AJTEC2011-44635
Analysis of a Graphene/Ultrathin Graphite Heat Exchanger for Aerospace Thermal Management, Alex
Heltzel (PC Krause and Associates, Inc., West Lafayette, IN, United States), Columbia Mishra
(Department of Mechanical Engineering and the Texas Materials Institute, Austin, TX, United States),
Andrew Fleming (U.S. Air Force Research Laboratory, Wright-Patterson Air Force Base, OH, United
States), Rodney S. Ruoff (University of Texas at Austin, Austin, TX, United States)
AJTEC2011-44208
Optimized Ionic Wind-Based Cooling Microfabricated Devices for Improving a Measured Coefficient of
Performance, Andojo Ongkodjojo Ong, Alexis R. Abramson, Norman C. Tien (Case Western Reserve
University, Cleveland, OH, United States)
Room: Kona Moku A
13:40-15:00, Monday, March 14
3-2-2 Transport Phenomena in Nanostructures for Energy Systems
Session Co-Organizer: Mitsuhiro Matsumoto (Kyoto University, Kyoto, Japan)
AJTEC2011-44492
Electromagnetic Energy Transport in Multi-Layered Nanoshell Cluster, Changhong Liu (Shanghai Jiao
Tong University, Shanghai, China), Ben Q. Li (University of Michigan, Dearborn, MI, United States)
AJTEC2011-44526
Ion Transport in Mesoporous Silica Thin Films, Hirofumi Daiguji, Daisuke Nakayama, Asuka Takahashi
(The University of Tokyo, Kashiwa, Chiba, Japan), Sho Kataoka, Akira Endo (National Institute of
Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan)
AJTEC2011-44195
A Molecular Dynamics Study for Diffusivity of Proton in Polymer Electrolyte Membrane, Takashi
Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan), Taiki Yoshida (Graduate
School of Engineering, Tohoku University, Sendai, Miyagi, Japan)
Room: Kona Moku A
15:20-16:40, Monday, March 14
3-2-3 Transport Analysis for Nanoscale Energy Systems
Session Co-Organizer: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan)
AJTEC2011-44504
NEGF Quantum Simulation of Field Emission Devices, Terence Musho, D. G. Walker, S. M. Claiborne
(Vanderbilt University, Nashville, TN, United States)
AJTEC2011-44309
Control of Dielectric Fluid Flow Distribution in Micro-Tubes with EHD Conduction Pumping Numerical Study, Miad Yazdani (United Technologies Research Centre, East Hartford, CT, United States),
Jamal Yagoobi (Illinois Institute of Technology, Chicago, IL, United States)
AJTEC2011-44239
Investigating the Effect of Pipe Inclination on Two-Phase Gas-Liquid Flows Using Advanced
Instrumentation, Abolore Abdulahi, Lokman Abdulkareem, Sharaf Safa, Mukhtar Abdulkadir, Valente
Hernandez Perez, B.J. Azzopardi (University of Nottingham, Nottingham, Nottingham, United Kingdom)
19
Room: Kona Moku B
10:40-12:00, Monday, March 14
3-1-1 Phonon Transport in Nano and Molecular Systems
Session Organizer: Xinwei Wang (Iowa State University, Ames, IA, United States)
Session Co-Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)
AJTEC2011-44341
Phonon Transport in Asymmetric Sawtooth Nanowires, Nick Roberts, D. G. Walker (Vanderbilt University,
Nashville, TN, United States)
AJTEC2011-44129
A Hybrid SN-PN Formulation for Solution of the Boltzmann Transport Equation for Phonons, Arpit Mittal,
Sandip Mazumder (Ohio State University, Columbus, OH, United States)
AJTEC2011-44111
Excitation of Single Phonon Modes in Nanoscale Waveguides, Drew A. Cheney, Jennifer R. Lukes
(University of Pennsylvania, Philadelphia, PA, United States)
AJTEC2011-44060
Direct Simulation of the Nonlinear Boltzmann Transport Equation for Phonons, Yusuke Masao, Mitsuhiro
Matsumoto (Kyoto University, Kyoto, Japan)
Room: Kona Moku B
13:40-15:00, Monday, March 14
3-1-2 Boundary Resistance and Conductance
Session Organizer: Xiulin Ruan (Purdue University, West Lafayette, IN, United States)
Session Co-Organizer: Yasutaka Yamaguchi (Osaka University, Suita, Osaka, Japan)
AJTEC2011-44314
Assesment of Vibrational Coupling at Solid-SAM-Solid Junctions, Christopher B. Saltonstall, John C.
Duda, Pamela Norris (University of Virginia, Charlottesville, VA, United States), Patrick Hopkins
(Sandia National Labs, Albuquerque, NM, United States)
AJTEC2011-44478
A Molecular Dynamics Study on Heat Transfer Characteristics over the Interface of Self-Assembled
Monolayer and Water Solvent, Gota Kikugawa, Taku Ohara (Tohoku University, Sendai, Japan), Toru
Kawaguchi, Ikuya Kinefuchi, Yoichiro Matsumoto (The University of Tokyo, Tokyo, Japan)
AJTEC2011-44643
A Quantum Mechanical Study of the Thermal Conduction Across a ZrB2-SiC Interface as a Function of
Temperature and Strain, Vikas Samvedi, Vikas Tomar (Purdue University, West Lafayette, IN, United
States)
AJTEC2011-44351
Slip Due to Rarefaction, Surface Roughness, and Intermolecular Interactions for Gases and Liquids,
Phillip Ligrani (Saint Louis University, St. Louis, MO, United States)
Room: Kona Moku B
15:20-16:40, Monday, March 14
3-1-3 Boundary Resistance and Thermal Conductivity of Complex Molecular Systems
Session Organizer: Yuji Nagasaka (Dept. of System Design Eng., Keio University, Yokohama, Japan)
Session Co-Organizer: Xiulin Ruan (Purdue University, West Lafayette, IN, United States)
AJTEC2011-44600
Molecular Dynamics of Thermal Boundary Resistance Between a Carbon Nanotube and Surrounding
Fluids, Jin Hyeok Cha, Shohei Chiashi, Jun-ichiro Shiomi, Shigeo Maruyama (Department of Mechanical
Engineering, The University of Tokyo, Tokyo, Japan)
AJTEC2011-44320
Contact Thermal Resistance Between Individual Multi-Wall Carbon Nanotubes, Juekuan Yang, Scott
Waltermire, Yang Yang, Deyu Li (Vanderbilt University, Nashville, TN, United States), Yunfei Chen
(Southeast University, Nanjing, Nanjing, Jiangsu Province, China)
AJTEC2011-44465
20
Effect of Alkyl Chain Length on Molecular Heat Transfer Characteristics in Lipid Bilayers, Takeo Nakano,
Gota Kikugawa, Taku Ohara (Tohoku University, Sendai, Japan)
AJTEC2011-44656
Atomistic Scale Thermal Transport in Amorphous Materials and Its Interfaces, A. K. Roy (Air Force
Research Laboratory, Wright-Patterson, OH, United States), Vikas Varshney, Jonghoon Lee (Universal
Technology Corporation, Dayton, OH, United States), Sabyasachi Ganguli, Sangwook Sihn (University of
Dayton Research Institute, Dayton, OH, United States), Barry Farmer (Air Force Research Laboratory,
Wright-Patterson AFB, OH, United States)
Room: Milo IV&V
10:40-12:00, Monday, March 14
3-3-1 Experimental Techniques for Micro- and Nanoscale Property Measurements - 1
Session Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States)
Session Co-Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Hiroshima, Japan)
AJTEC2011-44340
Measurements of the Intrinsic Thermal Conductivity of Individual Multi-Wall Carbon Nanotubes,
Juekuan Yang, Scott Waltermire, Yang Yang, Deyu Li (Vanderbilt University, Nashville, TN, United States),
Yunfei Chen (Southeast University, Nanjing, Nanjing, Jiangsu Province, China)
AJTEC2011-44380
Development of the Thermal Flash Method for Characterization of Carbon Nanofibers, Nayandeep K.
Mahanta, Alexis R. Abramson (Case Western Reserve University, Cleveland, OH, United States)
AJTEC2011-44421
Infrared Imaging Microscope as an Effective Tool for Measuring Thermal Resistance of Emerging
Interface Materials, Andrew McNamara, Vivek Sahu, Yogendra Joshi, Zhuomin Zhang (Georgia Institute
of Technology, Atlanta, GA, United States)
AJTEC2011-44097
Raman and Infrared Thermometry for Microsystems, Leslie Phinney (Sandia National Laboratories,
Albuquerque, NM, United States), Wei-Yang Lu (Sandia National Laboratories, Livermore, CA, United
States), Justin R. Serrano (Sandia National Laboratories, Albuquerque, NM, United States)
Room: Milo IV&V
13:40-15:00, Monday, March 14
3-3-2 Experimental Techniques for Micro- and Nanoscale Property Measurements - 2
Session Organizer: Bong Jae Lee (University of Pittsburgh, Pittsburgh, PA, United States)
Session Co-Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)
AJTEC2011-44489
Femtogram-Level Thermophysical Property Measurement of Polymeric Samples Using Heated
Microcantilevers, Andrew Gauffreau, Keunhan (Kay) Park (University of Rhode Island, Kingston, RI,
United States)
AJTEC2011-44508
A Platform for Thermal Property Measurements and Transmission Electron Microscopy of Nanostructures,
Tom Harris, Julio Martinez, Eric Shaner, Brian S. Swartzentruber, Jianyu Huang, John Sullivan (Sandia
National Laboratories, Albuquerque, NM, United States), Gang Chen (Massachusetts Institute of
Technology, Cambridge, MA, United States)
AJTEC2011-44574
High-Speed Transient Temperature Profile Control Using Adjoint-Based Optimal Control Scheme, Satoru
Ito, Yuji Suzuki (The University of Tokyo, Tokyo, Japan)
AJTEC2011-44302
Development and Characterization of an Electroplated Copper Nickel Alloy-Platinum
Micro-Thermocouple, Chan Ching, Simon Loane, Ravi Selvaganapathy, Chan Ching (McMaster
University, Hamilton, ON, Canada)
21
Room: Milo IV&V
15:20-16:40, Monday, March 14
3-3-13 Phase Change Materials, Condensation, and Combustion
Session Organizer: Hirofumi Daiguji (The University of Tokyo, Kashiwa, Chiba, Japan)
Session Co-Organizer: Yoav Peles (R.P.I., Troy, NY, United States)
AJTEC2011-44230
High Temperature Thermal Characterization of Ge(2)Sb(2)Te(5) for Phase Change Memory, Jaeho Lee
(Stanford University, Stanford, CA, United States), John P. Reifenberg (Intel Corporation, Santa Clara,
CA, United States), Mehdi Asheghi, Kenneth Goodson (Stanford University, Stanford, CA, United States)
AJTEC2011-44226
Numerical Study of Performance Enhancement of Single-Shot Heat Sinks Using Nano-Enhanced Phase
Change Material, Ingrid Cotoros, Ab Hashemi (Lockheed Martin, Advanced Technology Center, Palo
Alto, CA, United States)
AJTEC2011-44050
Thermal Properties of Polyurethane Shape Memory Polymer Filled with Magnetite Particles, Bernd
Weidenfeller (Clausthal University of Technology, Clausthal-Zellerfeld, Germany), Hauke Marquardt
(German Research Center for Geosciences GFZ, Potsdam, Germany), Muhammad Y. Razzaq
(Helmholtz-Zentrum Geesthacht, Teltow, Germany), Mathias Anhalt (Clausthal University of Technology,
Clausthal-Zellerfeld, Germany), Lars Frormann (Fachhochschule Zwickau, Zwickau, Germany), Frank R.
Schilling (Karlsruhe Institute of Technology, Karlsruhe, Germany)
AJTEC2011-44342
Observation of Micro Premixed Flames Surrounded by High Temperature Burned Gas Flow, Manabu
Fuchihata, Tamio Ida (Kinki University, Higashi-Osaka, Osaka, Japan), Kazunori Kuwana (Yamagata
University, Yonezawa, Yamagata, Japan), Satoru Mizuno (Kinki University, Higashi-Osaka, Osaka,
Japan)
22
Tuesday, March 15
Room: Kona Moku
9:00-9:40, Tuesday, March 15
4-1-1 Keynote - 3
Session Organizer: Jungho Kim (University of Maryland, College Park, MD, United States)
AJTEC2011-44005
Two-Phase Micro-Channel Heat Sinks: Theory, Applications and Limitations, Issam Mudawar (Purdue
University, West Lafayette, IN, United States)
Room: Kona Moku
4-1-2 Keynote - 4
Session Organizer: Roy Hogan (Sandia National Laboratories, Albuquerque, NM, United States)
AJTEC2011-44645
Spacecraft Thermal Management, Bruce Drolen (The Boeing Company, Los Angeles, United States)
Room: Honolulu
1-4-2 Heat Pipe, Evaporator, Condenser, Thermal Cycle - 1
Session Organizer: Akio Tomiyama (Kobe University, Kobe, Japan)
Session Co-Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)
AJTEC2011-44015
The Constrained Vapor Bubble Experiment - Results From the International Space Station, Arya
Chatterjee, Joel Plawsky, Peter Wayner, Jr. (Rensselaer Polytechnic Institute, Troy, NY, United States),
David F. Chao, Ronald J. Sicker (NASA Glenn Research, Cleveland, OH, United States), Louis Chestney,
Tibor Lorik, John Eustace, John Zoldak (Zin Technologies, Cleveland, OH, United States)
AJTEC2011-44190
Liquid Film Thickness of Oscillating Flow in a Micro Tube, Youngbae Han, Naoki Shikazono, Nobuhide
Kasagi (The University of Tokyo, Tokyo, Japan)
AJTEC2011-44010
Experimental Adiabatic Two-Phase Pressure Drops of R134a, R236fa and R245fa in Small Horizontal
Circular Channels, Chin Lee Ong (IBM Zurich Research Laboratory, Ruschliklon, Switzerland), John R.
Thome (Ecole Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland)
AJTEC2011-44262
Effects of Pitch and Depth on the Condensation Heat Transfer of R-134a Flowing Through Corrugated
Tubes, Suriyan Laohalertdecha, Somchai Wongwises (King Mongkut’s University of Technology
Thonburi, Bangkok, Thailand)
23
Room: Honolulu
13:40-15:00 Tuesday, March 15
1-4-7 Heat Pipe, Evaporator, Condenser, Thermal Cycle - 2
Session Organizer: Ali Siahpush (INL, Idaho Falls, ID, United States)
Session Co-Organizer: Tomoaki Kunugi (Kyoto University, Kyoto, Japan)
AJTEC2011-44258
Flashing Flow Mechanisms of HFC-134a and HFC-410a Through Short-Tube Orifices, Kitti Nilpueng,
Somchai Wongwises (King Mongkut’s University of Technology Thonburi, Bangkok, Thailand)
AJTEC2011-44267
Comparison of Various Alternative Refrigerants for Vapour Compression Refrigeration Systems, Ahmet
Selim Dalkilic (Yildiz Technical University, Istanbul, Turkey), Somchai Wongwises (King Mongkut’s
University of Technology Thonburi, Bangkok, Thailand)
AJTEC2011-44119
Neutron Imaging Feasibility of Liquid Metal Coolant Behaviors Inside a High Temperature Alloy Heat
Pipe, Kenneth Kihm (University of Tennessee, Knoxville, TN, United States), Daniel Hussey (National
Institute of Standards and Technology, Gaitherburgh, MD, United States), David Pratt (USAF, WPAFB,
OH, United States), Andrew Swanson (AFRL/RBSA, Wright-Patterson AFB, OH, United States)
Room: Honolulu
1-4-4 Boiling Heat Transfer
Session Organizer: M. Erol Ulucakli (Lafayette College, Easton, PA, United States)
Session Co-Organizer: Hisato Minagawa (The University of Shiga Prefecture, Siga, Japan)
AJTEC2011-44519
Heat Transfer Characteristics of Isolated Bubble Nucleate Boiling of Water, Tomohide Yabuki, Osamu
Nakabeppu (Meiji University, Kawasaki, Japan)
AJTEC2011-44045
Pool Boiling Heat Transfer of Highly Wetting Fluids on Smooth Metallic Surfaces, Bradley Bon, James
Klausner (University of Florida, Gainesville, FL, United States)
AJTEC2011-44401
Numerical Study on Subcooled Pool Boiling, Yasuo Ose, Tomoaki Kunugi (Kyoto University, Kyoto,
Japan)
AJTEC2011-44408
Enhancement of Saturation Boiling of PF-5060 on Microporous Surface, Saeil Jeon, Byeongnam Jo,
Debjyoti Banerjee (Texas A&M University, College Station, TX, United States)
Room: Kou
1-8-5 Instrumentation - II
Session Organizer: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States)
Session Co-Organizer: Atsuki Komiya (Tohoku University, Sendai, Miyagi, Japan)
AJTEC2011-44287
Phosphor Thermometry by Using Rare Earth-Doped Yttrium Oxides, Naohiro Ishiwada (Keio University,
Tokyo, Japan), Satoko Fujioka, Toshihisa Ueda, Takeshi Yokomori (Keio University, Kanagawa, Japan)
AJTEC2011-44639
Magnetic Resonance Imaging Techniques for Measuring Film Cooling Flow Velocity and Effectiveness,
Christopher J. Elkins, Emin Issakhanian, John K. Eaton (Stanford University, Stanford, CA, United
States)
AJTEC2011-44461
Microscopic Fluid Temperature Measurements Using Fluorescence Polarization Method, Kazuya Tatsumi,
Akihisa Tozaki, Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan)
AJTEC2011-44612
Electric Charge of Micro and Nano Bubbles by Interferometric Laser Imaging Technique, Tomohiro
24
Sekiguchi, Tatsuya Kawaguchi, Isao Satoh, Takushi Saito (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kou
1-8-3 Diagnostics
Session Organizer: Kazuyoshi Nakabe (Kyoto University, Kyoto, Japan)
AJTEC2011-44444
Evaluation of Gas Permeability in Microfluidic Devices by Confocal Micro-PIV Combined with LIF
Technique, Mitsuhisa Ichiyanagi (The University of Tokyo, Tokyo, Japan), Keita Sakai, Shinya Kidani,
Yasuhiro Kakinuma, Yohei Sato, Koichi Hishida (Keio University, Yokohama, Japan)
AJTEC2011-44485
Impact of Interstitial Mass Transport Resistance on Water Vapor Diffusion Through Southern Mills
DefenderTM 750 Fabric Layers, Anshul Sharma (University of Texas - Austin, Austin, TX, United States),
Sandra Boetcher (University of North Texas, Denton, TX, United States), Walid Aissa (King AbdulAziz
University, Faculty of Engineering at Rabigh, Rabigh, Saudi Arabia), Matthew Traum (University of
North Texas, Denton, TX, United States)
AJTEC2011-44232
Evaluation of Effective Thermal Conductivity of Multilayer Printed Circuit Board, Yasushi Koito, Toshio
Tomimura, Yoshihiro Shiotsu (Kumamoto University, Kumamoto, Japan), Masaru Ishizuka, Tomoyuki
Hatakeyama (Toyama Prefectural University, Toyama, Japan)
AJTEC2011-44557
Validation of a Thermal Conductivity Measurement System for Fuel Compacts, Colby Jensen, Changhu
Xing, Heng Ban (Utah State University, Logan, UT, United States), Jeffrey Phillips (Idaho National
Laboratory, Idaho Falls, ID, United States)
Room: Waikiki 1
1-3-10 Condensation and Miscellaneous
Session Organizer: Niro Nagai (University of Fukui, Fukui, Japan)
Session Co-Organizer: Peter de Bock (GE Global Research Center, Niskayuna, NY, United States)
AJTEC2011-44532
Study on Condensation Heat Transfer of Micro Structured Surfaces (Effect on Condensation Heat Transfer
of Metal-Spattering Surfaces), Hiroyasu Ohtake, Takeru Komatsu (Kogakuin University, Tokyo, Japan),
Yasuo Koizumi (Shinshu University, Ueda, Nagano, Japan)
AJTEC2011-44155
Cooling-Induced Depressurization of a Steam-Filled Chamber, Pengfei He, Chao Zhu (New Jersey
Institute of Technology, Newark, NJ, United States), Chao-Hsin Lin (Boeing Commercial Airplanes,
Seattle, WA, United States), Rajesh Patel (New Jersey Institute of Technology, Newark, NJ, United States)
AJTEC2011-44502
Effects of Local Concentration on Freezing Solutions of Winter Flounder Antifreeze Protein, Yoshimichi
Hagiwara (Kyoto Institute of Technology, Kyoto, Sakyo-ku, Japan), Ryo Sakurai (Fujitsu, Kumagaya,
Japan), Daichi Yamamoto, Atsuhide Kitagawa (Kyoto Institute of Technology, Kyoto, Sakyo-ku, Japan)
AJTEC2011-44092
Functional Materials for Energy Storage: Fabrication of Shape Stabilized Polymeric Phase Change
Composites and the Determination of Their Thermophysical Properties for Use in Energy Conservation
Applications, Anjum Saleem, Lars Frormann (University of Applied Sciences, Zwickau, Germany)
Room: Waikiki 1
1-3-11 Pool Boiling - 1
Session Organizer: Masanori Monde (Saga University, Saga, Japan)
Session Co-Organizer: Jungho Kim (University of Maryland, College Park, MD, United States)
AJTEC2011-44122
25
Effect of the Bottom and Top Configurations on Pool Film Boiling Around a Vertical Finite-Length
Cylinder, Satoru Momoki, Kenichi Araki, Toru Shigechi, Takashi Yamada (Nagasaki University, Nagasaki,
Japan), Kaoru Toyoda (Maizuru National College of Technology, Kyoto, Japan), Tomohiko Yamaguchi,
Odgerel Jambal (Nagasaki University, Nagasaki, Japan)
AJTEC2011-44084
Water-Heating Pool Boiling of Different Refrigerants on a Horizontal Smooth Tube, Tailian Chen
(Gonzaga University, Spokane, WA, United States)
AJTEC2011-44449
On the Scaling of Pool Boiling Heat Flux with Gravity and Heater Size, Jungho Kim, Rishi Raj (University
of Maryland, College Park, MD, United States), John McQuillen (NASA Glenn Research Center,
Cleveland, OH, United States)
AJTEC2011-44498
Concerning the Effect of Surface Material on Nucleate Boiling Heat Transfer of R-113, Reza Hosseini,
Amir Gholaminejad, Mahdi Nabil (Amirkabir University of Technology, Tehran, Tehran, Iran),
Mohammad Hossein Samadinia (The Islamic Azad University, West Tehran Branch, Tehran, Tehran, Iran)
Room: Waikiki 1
1-3-4 Pool Boiling - 2
Session Organizer: Lars Frormann (Fachhochschule Zwickau, Zwickau, Germany)
Session Co-Organizer: Yasuo Koizumi (Shinshu University, Ueda, Nagano, Japan)
AJTEC2011-44286
Interaction of Liquid and Heating Surface During Nucleate Boiling Processes, Juris Ekmanis (Latvian
Academy of Sciences, Institute of Physical Enegetics, Riga, Latvia), Daniels Turlajs (Riga Technical
University, Riga, Latvia), Namejs Zeltins (Latvian Academy os Sciences, Institute of Physical Energetics,
Riga, Latvia), Sigurds Jaundalders (Riga Technical University, Riga, Latvia)
AJTEC2011-44593
Enhancement of Pool Boiling and Critical Heat Flux in Self-Rewetting Fluids at Above Atmospheric
Pressures, Mostafa Morovati, Hitesh Bindra (City College of New York, New York, NY, United States),
Shuji Esaki (Kagoshima National College of Technology, Kirishima, Kagoshima, Japan), Masahiro
Kawaji (City College of New York, New York, NY, United States)
AJTEC2011-44065
Experimental Research of Boiling Heat Transfer Phenomena on Metal Surface in State of Low
Gravitational Acceleration Field Between 0 g and 1 g, Eiji Nemoto (Ibaraki National College of
Technology, Hitachinaka, Ibaraki, Japan), Tomohiro Saitoh (NAZKA Aerospace Engineering Aerosopace
Design, Nagoya, Aichi, Japan)
Room: Waikiki 2
1-2-7 Computational Heat and Mass Transfer (Heat Conduction & Diffusion) - 1
Session Organizer: Sandip Mazumder (Ohio State University, Columbus, OH, United States)
Session Co-Organizer: Ichiro Ueno (Tokyo University of Science, Noda, Chiba, Japan)
AJTEC2011-44237
Analysis of One-Dimensional Hyperbolic Heat Conduction in a Functionally Graded Thin Plate,
Mohammad Reza Raveshi, Shayan Amiri, Ali Keshavarz (K.N.Toosi University of Technology, Tehran,
Iran)
AJTEC2011-44177
Numerical Simulation of the Cooling Process of Cubic Shells, Manabu Okura (Tsurumi Industrial High
School, Yokohama, Japan), Kiyoaki Ono (Nihon University, Tokyo, Japan)
AJTEC2011-44167
Heat Transfer Between Colliding Surfaces and Particles, Like Li, Renwei Mei, James Klausner, David
Hahn (University of Florida, Gainesville, FL, United States)
26
Room: Waikiki 2
1-2-13 Computational Heat and Mass Transfer (Heat Conduction & Diffusion) - 2
Session Organizer: Baratunde Cola (Georgia Institute of Technology, Atlanta, GA, United States)
Session Co-Organizer: Kazuya Tatsumi (Kyoto University, Kyoto, Kyoto, Japan),
Session Co-Organizer: Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States)
AJTEC2011-44276
Thermal Conductivity of Cage-Like Structures, Mona Zebarjadi, Keivan Esfarjani, Gang Chen
(Massachusetts Institute of Technology, Cambridge, MA, United States)
AJTEC2011-44578
Numerical Simulation of Heat and Mass Transfer of Limestone Decomposition in Lime Kiln, Do Duc Hai
(University Magdeburg, Magdeburg, Germany), Eckehard Specht (Otto-von-Guericke-Universität
Magdeburg, Magdeburg, Germany)
AJTEC2011-44343
Thermal Properties of Yttrium Aluminum Garnett from Molecular Dynamics Simulations, Majid
al-Dosari, D. G. Walker (Vanderbilt University, Nashville, TN, United States)
Room: Waikiki 2
1-1-2 Non-Newtonian Convection
Session Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States)
Session Co-Organizer: Kazuyoshi Nakabe (Kyoto University, Kyoto, Japan)
AJTEC2011-44462
Structure of Low-Speed Streaks in Drag Reducing Flow with Polymer Solution Blown From the Channel
Wall, Hening Xu, Shota Ishitsuka, Masaaki Motozawa (Tokyo University of Science, Noda, Chiba, Japan),
Kaoru Iwamot (Tokyo University of Agriculture and Technology, Koganei, Tokyo, Japan), Hirotomo
Ando, Tetsuya Senda (National Maritime Research Institute, Mitaka, Tokyo, Japan), Bo Yu (China
University of Petroleum, Beijing, China), Yasuo Kawaguchi (Tokyo University of Science, Noda, Chiba,
Japan)
AJTEC2011-44464
Simultaneous PIV and PLIF Measurement on the Drag Reducing Channel Flow of the Homogeneous
Surfactant Solution, Takahiro Watanabe, Kohei Tanaka, Masaaki Motozawa, Yasuo Kawaguchi (Tokyo
University of Science, Noda, Chiba, Japan)
AJTEC2011-44542
Intertube Falling-Film Heat Transfer Behavior of Multiwall Carbon Nanotube Suspensions (MWCNT
Nanofluids), Binglu Ruan (Tsinghua University/University of Illinois/Xi’an Jiaotong University,
Beijing/Urbana/Xi’an, China), Anthony M Jacobi (University of Illinois, Urbana, IL, United States)
Room: Waikiki 3
1-1-4 Natural Convection - 1
Session Organizer: Alex da Silva (University of Texas at Austin, Austin, TX, United States)
Session Co-Organizer: Yasuo Kawaguchi (Tokyo University of Science, Noda, Japan)
AJTEC2011-44636
The Effects of Solid Thermal Conductivity and Volume-Fraction in the Natural Convection Inside a
Heterogeneous Enclosure, Fernando C. De Lai, Admilson T. Franco, Silvio L. M. Junqueira (Federal
Technological University of Parana, Curitiba, Paraná, Brazil), Jose L. Lage (Southern Methodist
University, Dallas, TX, United States)
AJTEC2011-44493
An Experimental Study of Heat Transfer From Small Horizontal Cylinders at Near-Critical Pressures,
Yohann Rousselet (INSA Lyon, Lyon, Villeurbanne Cedex, France), Gopinath Warrier, Vijay K. Dhir
(University of California, Los Angeles, Los Angeles, CA, United States)
AJTEC2011-44507
27
Whole Field Temperature and Velocity Measurements for Two-Phase Flow Using PIV/LIF, Carlos E.
Estrada-Perez (Texas A&M University, College Station, US Outlying Is), Sinchao Tan (Harbin
Engineering University, Harbin, Heilongjiang, China), Yassin Hassan (Texas A&M University, College
Station, TX, United States)
AJTEC2011-44552
Laminar Natural Convection From Vertical Cylinders: a Revisit to a Classical Subject, Jerod C. Day,
Matthew Traum, Sandra Boetcher (University of North Texas, Denton, TX, United States)
Room: Waikiki 3
1-1-11 Natural Convection - 2
Session Organizer: Takashi Masuoka (Kyushu University, Fukuoka, Japan)
AJTEC2011-44604
Natural Convection Heat Transfer of Concentric/Eccentric Annulus Subjected to Inner Tube of Constant
Heat Flux, Reza Hosseini, Mahdi Alipour, Amir Gholaminejad (Amirkabir University of Technology,
Tehran, Tehran, Iran)
AJTEC2011-44411
Effect of Inner Pipe Rotation on Natural Convection Heat Transfer of Concentric Pipes, Reza Hosseini,
Amir Gholaminejad, Mahdi Alipour (Amirkabir University of Technology, Tehran, Tehran, Iran)
AJTEC2011-44409
Transport Process by Natural Convection and Molecular Diffusion of Two Component Gases in a
Stratified Fluid Layer, Tetsuaki Takeda, Hirotaka Isomi, Hiroki Hanazawa (University of Yanamashi,
Kofu, Yamanashi, Japan)
AJTEC2011-44452
Scaling of Transient Natural Convection Cooling in a Side-Cooled Cavity - The Effect of Variable
Viscosity, Obai Younis Taha Elamin (Taylors University College, Subang Jaya, Selangor, Malaysia), Feng
Xu, Chengwang Lei, John Patterson (University of Sydney, Sydney, Australia), Jordi Pallares, Francesc
Xavier Grau (Universitat Rovira i Virgili, Tarragona, Spain)
Room: Waikiki 3
1-1-5 Natural/Mixed Convection
Session Organizer: Yaroslav Chudnovsky (Gas Technology Institute, Des Plaines, IL, United States)
Session Co-Organizer: Tetsuaki Takeda (University of Yamanashi, Yamanashi, Japan)
AJTEC2011-44191
Literature Review of Single Phase Internal Flow Heat Transfer Correlations in Straight Circular Conduits,
Amanie Abdelmessih, Erik McGuire (Saint Martin’s University, Lacey, WA, United States)
AJTEC2011-44174
An Experimental Study on Mixed Convection Heat Transfer for Thermally Developing Flow in
Horizontal Ducts with Radiation Effects, Rajamohan Ganesan (Curtin University of Technology, Miri,
Malaysia), Ramesh Narayanaswamy (Curtin University of Technology, Perth, Australia), Alexander
Gorin, Kumar Perumal (Curtin University of Technology, Miri, Malaysia)
AJTEC2011-44225
Natural Convection Heat Transfer in Vertical Fluid Layers of High Aspect Ratio, Takashi Masuoka
(Kyushu University, Fukuoka, Japan), Yasushi Kakimoto (Shizuoka University, Hamamatsu, Japan),
Hirokazu Ito, Koichi Inoue (University of Kitakyushu, Kitakyushu, Japan)
AJTEC2011-44227
Numerical Study of Thermal Convection in Boussinesq Stokes Suspension Occupying a Rectangular Box,
Manjunath Sreeramaiah, Chandrashekara Nazare Panduranga Rao (B.N.M. Institute of Technology,
Bangalore, Karnataka, India)
28
Room: Kona Moku B
2-1-1 Heat and Mass Transfer in Turbulent Combustion I
Session Organizer: Tatsuya Hasegawa (Nagoya University, Nagoya, Japan)
Session Co-Organizer: Alex Brown (Sandia National Labs, Albuquerque, NM, United States)
AJTEC2011-44039
An Experimental Study on Properties of Local Burning Velocity for Hydrogen Added Hydrocarbon
Premixed Turbulent Flames, Masaya Nakahara (Ehime University, Matsuyama, Japan), Jun Hashimoto
(Tsuyama National College of Technology, Tsuyama, Japan), Atsushi Ishihara (Saitama Institute of
Technology, Fukaya, Japan), Koich Murakami (Ehime University, Matuyama, Japan)
AJTEC2011-44221
Study of Thermo-Diffusive Effects on Iso-Octane/Air Flames at Fixed Turbulence Karlovitz Number,
Akihiro Hayakawa, Tomohiro Takeo, Yukito Miki, Yukihide Nagano, Toshiaki Kitagawa (Kyushu
AJTEC2011-44472
Flow-Geometry and Reynolds-Number Effects on Flame-Turbulence Interactions, Yuki Minamoto (Tokyo
Institute of Technology, Tokyo, Japan), Yuzuru Nada (Toyohashi University of Technology, Aichi, Japan),
Masayasu Shimura, Naoya Fukushima, Youngsam Shim, Mamoru Tanahashi, Toshio Miyauchi (Tokyo
Institute of Technology, Tokyo, Japan)
AJTEC2011-44587
Analysis of Thermocouple Responses to Turbulent Radiating Environments, OA Ezekoy, Craig
Weinschenk (University of Texas at Austin, Austin, TX, United States)
Room: Kona Moku B
2-1-2 Heat and Mass Transfer in Turbulent Combustion II
Session Organizer: Leiyong Jiang (NRCC, Ottawa, ON, Canada)
Session Co-Organizer: Hideaki Kobayashi (Tohoku University, Sendai, Japan)
AJTEC2011-44294
DNS Analysis on Local Burning Velocity and Flame Displacement Speed of Turbulent Premixed Flames
with Different Density Ratio, Kazuya Tsuboi (Okayama University, Okayama, Japan), Tatsuya Hasegawa
(Nagoya University, Nagoya, Japan)
AJTEC2011-44479
Measurements of Fuel Concentration and Temperature Distributions in Lean Premixed Flame with
Swirling Flow, Masaharu Komiyama, Kenichiro Takeishi, Kazumi Araki (Osaka University, Suita, Osaka,
Japan)
AJTEC2011-44441
Local Quenching Recovery Processes of Premixed and Diffusion Interacting Flames in a Turbulent
Opposite Flow, Ikuyo Makino, Takayuki Kawanami (Tohoku University, Aoba-ku Sendai, Japan), Yuji
Yahagi (Shibaura Institute of Technology, Tokyo, Japan)
AJTEC2011-44585
Comparison of Accuracy and Computational Expense of Radiation Models in Simulation of
Non-Premixed Turbulent Jet Flames, Gopalendu Pal (University of California, Merced, Merced, CA,
United States), Ankur Gupta (The Pennsylvania State University, University Park, PA, United States),
Michael Modest (University of California, Merced, Merced, CA, United States), Daniel C Haworth (The
Pennsylvania State University, University Park, PA, United States)
29
Room: Kona Moku C
2-2-4 Heat and Mass Transfer in Combustion Systems IV - Coal and Biomass Combustion I Session Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)
Session Co-Organizer: Satoshi Kadowaki (Nagaoka University of Technology, Nagaoka, Niigata, Japan)
AJTEC2011-44608
Parametric Studies on PCI Performances, Dong Fu, Chenn Zhou, Dezhi Zheng (Purdue University
Calumet, Hammond, IN, United States), Kyle Ferron (United States Steel Canada, Hamilton, ON, Canada),
Yongfu Zhao (United States Steel, Munhall, PA, United States), John D’Alessio (United States Steel
Canada, Hamilton, ON, Canada)
AJTEC2011-44180
Deveropment of Advanced Combustor for Biomass, Masato Urashima, Shuichii Torii (Kumamoto
University, Kumamoto, Japan)
AJTEC2011-44093
Fluidised Bed Combustion of Blends of Coal and Pressed Sugar Beet Pulp, John Ward, Muhammad Akram,
Roy Garwood (University of Glamorgan, Pontypridd, Wales, United Kingdom)
Room: Kona Moku C
2-2-5 Heat and Mass Transfer in Combustion Systems V - Coal and Biomass Combustion II Session Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)
Session Co-Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)
AJTEC2011-44205
Detecting Burner Instabilities Using Joint-Time Frequency Methods Whilst Co-Firing Coal and Biomass,
Palani Valliappan, Shee Meng Thai, Steven Wilcox, John Ward (University of Glamorgan, Pontypridd,
Wales, United Kingdom), Chee K Tan (University of Glamorgan, Rhondda Cynon Taff, Wales, United
Kingdom), Krzysztof Jagiello (Institue of Power Engineering, Warsaw, Poland)
AJTEC2011-44182
Reburning of Cattle Manure-Based Biomass with Coals in a Small Scale Boiler Burner Facility for NOx
and Hg Reductions, Hyukjin Oh (Research Institute of Industrial Science & Technology, Pohang, Korea
(Republic)), Kalyan Annamalai (Texas A&M University, College Station, TX, United States), John
Sweeten (Texas A&M University, Amarillo, TX, United States)
AJTEC2011-44522
The Characteristics of Recycled-NO Reduction in O2/CO2 Coal Combustion, Takashi Marumo, Jun-ichiro
Yamamoto, Hirotatsu Watanabe, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44279
NO Reduction Mechanism Peculiar to O2/CO2 Coal Combustion Characterized by High CO2
Concentration, Hirotatsu Watanabe, Takashi Marumo, Jun-ichiro Yamamoto, Ken Okazaki (Tokyo
Room: Kona Moku C
2-2-6 Heat and Mass Transfer in Combustion Systems VI - Biomass and Waste Combustion Session Organizer: Kaoru Maruta (Tohoku University, Sendai, Japan)
Session Co-Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)
AJTEC2011-44145
Combustion of Bio-Coke (Highly Densified Biomass Fuel) Block in High-Temperature Air Flow,
Hiroyuki Ito, Yuto Sakai (Hokkaido University, Sapporo, Japan), Tamio Ida (Kinki University,
Higashi-Osaka, Japan), Yuji Nakamura, Osamu Fujita (Hokkaido University, Sapporo, Hokkaido, Japan)
AJTEC2011-44436
Effects of Heterogeneous Reaction and Slow/Rapid Volatilization Process on N2O Formation During the
Combustion of Pulverized Biomass, Yukihiko Okumura (Maizuru National College of Technology,
Maizuru, Kyoto, Japan), Hirotatsu Watanabe, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)
30
AJTEC2011-44159
Decomposition of Toluene as a Biomass Tar Through Partial Combustion, Noriaki Nakatsuka, Yasushi
Imoto, Jun Hayashi (Osaka University, Suita, Osaka, Japan) Miki Taniguchi, Kenichi Sasauchi
(Chugai-Ro, Osaka, Japan), Mayumi Matsuda (J-Science Lab, Kyoto, Japan), Fumiteru Akamatsu (Osaka
University, Suita, Osaka, Japan)
AJTEC2011-44242
Numerical Optimization of Waste to Energy Plant at Different Operating Conditions, Niko Samec, Miran
Kapitler, Filip Kokalj (University of Maribor, Faculty of Mechanical Engineering, Maribor, Slovenia)
Room: Milo III
2-4-5 Heat and Mass Transfer in Energy Devices V - Solar Energy 1 (Photovoltaic Cells) Session Organizer: Kohei Ito (Kyushu University, Fukuoka, Japan)
AJTEC2011-44513
Photovoltaic Generation of Electricity Using Near-Field Radiation, Katsunori Hanamura, Hirofumi Fukai,
Elaiyaraju Srinivasan, Masao Asano, Teppei Masuhara (Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44132
Band-Gap Tuned Direct Absorption for Hybrid Concentrating Solar Photovoltaic/Thermal System, Todd
Otanicar (Loyola Marymount University, Los Angeles, CA, United States), Ihtesham Chowdhury, Patrick
Phelan, Ravi Prasher (Arizona State University, Tempe, AZ, United States)
AJTEC2011-44580
Design Parameters for High-Efficiency Hybrid PV/Thermal Solar Energy Systems, Hamid Hadim, Jerry
Dutreuil (Stevens Institute of Technology, Hoboken, NJ, United States)
AJTEC2011-44349
Fabrication of a Dye Sensitized Solar Cell and Its Performance Dependence on Temperature and
Irradiance, Edwin Peng, Halil Berberoglu (The University of Texas at Austin, Austin, TX, United States)
Room: Milo III
2-4-6 Heat and Mass Transfer in Energy Devices VI - Solar Energy 2 (Thermal Utilization & Reactor) Session Organizer: Sandip Mazumder (Ohio State University, Columbus, OH, United States)
Session Co-Organizer: Katsunori Hanamura (Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44354
An Exergy-Based Metric for Evaluating Solar Thermal Absorber Technologies for Gas Heating, Maritza
Ruiz, Van Carey (University of California, Berkeley, CA, United States)
AJTEC2011-44328
Simulation on Solar Energy Collection to Power a Thermoacoustic Prime Mover Using Pressurized Hot
Steam, Ikhsan Setiawan, Makoto Nohtomi (Waseda University, Saitama, Japan), Masafumi Katsuta
(Waseda University, Tokyo, Japan)
AJTEC2011-44381
Characterization of Activated Carbon for Carbon Laden Flows in a Solar Reactor, Nesrin Ozalp,
Vidyasagar Shilapuram (Texas A&M University at Qatar, Doha, Qatar)
AJTEC2011-44387
Simulation of Solar Thermochemical Hydrogen Production Techniques, Mohamed Almodaris, Sara
Khorasani, Jocin James Abraham, Nesrin Ozalp (Texas A&M University at Qatar, Doha, Qatar)
Room: Milo III
2-4-3 Heat and Mass Transfer in Energy Devices III - Energy Storage & Utilization Session Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States)
Session Co-Organizer: Kosuke Nishida (Kyoto Institute of Technology, Kyoto, Japan)
AJTEC2011-44146
31
Design Concept and the Performance of a Metal Hydride Hydrogen Storage Tank in Totalized Hydrogen
Energy Utilization System, Tetsuhiko Maeda (National Institute of Advanced Industrial Science and
Technology, Tsukuba, Ibaraki, Japan), Keiichi Nishida, Shiro Yamazaki (Tokyo Institute of Technology,
Yokohama, Japan), Yoshiaki Kawakami, Masao Masuda (Takasago Thermal Engineering Co. Ltd., Atsugi,
Kanagawa, Japan), Manabu Tange (Shibaura Institute of Technology, Tokyo, Japan), Yasuo Hasegawa,
Hiroshi Ito, Akihiro Nakano (National Institute of Advanced Industrial Science and Technology, Tsukuba,
Ibaraki, Japan)
AJTEC2011-44148
The Actual Operation of Multiple Metal Hydride Hydrogen Storage Tanks in Totalized Hydrogen Energy
Utilization System, Yoshiaki Kawakami, Masao Masuda (Takasago Thermal Engineering Co. Ltd., Atsugi,
Kanagawa, Japan), Tetsuhiko Maeda, Akihiro Nakano (National Institute of Advanced Industrial Science
and Technology, Tsukuba, Ibaraki, Japan), Manabu Tange (Shibaura Institute of Technology, Tokyo,
Japan), Atsushi Takahashi (Takasago Thermal Engineering Co. Ltd., Atsugi, Kanagawa, Japan), Masakazu
Shoji, Hideyuki Aoki, Takatoshi Miura (Tohoku University, Sendai, Japan)
AJTEC2011-44630
Influence of Surface Emissivity and of Low Emissivity Shields on the Thermal Properties of Low Density
Insulating Materials, Manuela Campanale, Lorenzo Moro (Universita Degli Studi Di Padova, Padova,
Italy), Mariacarla Arduini Schuster (Zae Bayer, Wurzburg, Germany)
AJTEC2011-44592
Heat Transfer Effects on Dynamic Pressure Response of Pneumatic Vacuum Circuit, Zhonghua Guo,
Xiaoning Li (Nanjing University of Science and Technology, Nanjing, China), Toshiharu Kagawa (Tokyo
Institute of Technology, Yokohama, Japan)
Room: Kona Moku A
3-2-4 Phase Transition and Fluid Structure in Nanoscale Energy Systems
Session Organizer: Yoav Peles (R.P.I, Troy, NY, United States)
Session Co-Organizer: Takashi Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Japan)
AJTEC2011-44407
Molecular Dynamics Simulation of Three-Dimensional Heterogeneous Nucleation, Donguk Suh, Kenji
Yasuoka (Keio University, Yokohama, Japan)
AJTEC2011-44457
Multicanonical Molecular Dynamics Simulation Study of the Liquid-Solid and Solid-Solid Transitions in
Lennard-Jonse Clusters, Toshihiro Kaneko, Kenji Yasuoka, Ayori Mitsutake (Keio University, Yokohama,
Japan), Xiao Cheng Zeng (University of Nebraska - Lincoln, Lincoln, NE, United States)
AJTEC2011-44602
Cutoff Radius Effect of Water Configuration Using the Wolf Method, Kazuaki Takahashi (Keio University,
Yokohama, Japan), Tetsu Narumi (University of Electro-Communications, Tokyo, Japan), Kenji Yasuoka
(Keio University, Yokohama, Kanagawa, Japan)
AJTEC2011-44609
Molecular Dynamics Simulation of Quasi-Two-Dimensional Water Network on Ice Nucleation Protein,
Daisuke Murakami, Kenji Yasuoka (Keio University, Yokohama, Japan)
Room: Kona Moku A
3-2-5 Interfacial Transport Phenomena in Energy Systems
32
Session Organizer: Kenji Yasuoka (Keio University, Yokohama, Japan)
Session Co-Organizer: Patrick Hopkins (Sandia National Labs, Albuquerque, NM, United States)
AJTEC2011-44373
Interfacial Thermal Resistance Between a Carbon Nanoparticle and Molten Salt Eutectic: Effect of
Material Properties, Particle Shapes and Sizes, Byeongnam Jo, Debjyoti Banerjee (Texas A&M University,
College Station, TX, United States)
AJTEC2011-44474
Molecular Analysis on the Dynamic Properties of Water Droplet at Solid-Liquid Interface Based on MD
Simulations, Yasutaka Yamaguchi, Donatas Surblys, Satoshi Nakaoka (Osaka University, Suita, Osaka,
Japan), Koji Kuroda, Tadashi Nakajima, Hideo Fujimura (Dai Nippon Printing Co., Ltd., Tsukuba, Ibaraki,
Japan)
AJTEC2011-44220
Effects of the Nanostructural Geometry at a Liquid-Solid Interface on the Interfacial Thermal Resistance
and the Liquid Molecular Non-Equilibrium Behaviors, Masahiko Shibahara (Osaka University, Osaka,
Japan), Taku Ohara (Tohoku University, Sendai, Miyagi, Japan)
Room: Kona Moku A
3-2-6 Nanofluids and Nanoparticles in Energy Systems
Session Organizer: Avijit Bhunia (Teledyne Scientific, Thousand Oaks, CA, United States)
Session Co-Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan)
AJTEC2011-44448
Characterization and Convective Heat Transfer with Nanofluids, Yijun Yang, Alp Oztekin (Lehigh
University, Bethlehem, PA, United States), Satish Mohapatra (Dynalene, Inc., Whitehall, PA, United
States), Sudhakar Neti (Lehigh University, Bethlehem, PA, United States)
AJTEC2011-44453
Effect of Nano-Cluster Compactness on Thermal Physical Properties of Nanofluids, Zhaozan Feng, Wei Li,
Tingting Wu (Zhejiang University, Hangzhou, China)
AJTEC2011-44124
Nanofluid Extinction Coefficients for Photothermal Energy Conversion, Robert Taylor, Patrick Phelan,
Ronald Adrian, Ravi Prasher (Arizona State University, Tempe, AZ, United States), Todd Otanicar
(Loyola Marymount University, Los Angeles, CA, United States)
AJTEC2011-44170
Enhancing the Heat Transfer in Energy Systems From a Volumetric Approach, Todd Otanicar (Loyola
Marymount University, Los Angeles, CA, United States)
Room: Kona Moku B
3-1-6 Design and Control of Thermal Transport
Session Organizer: Vikas Tomar (Purdue University, West Lafayette, IN, United States)
Session Co-Organizer: Yasutaka Yamaguchi (Osaka University, Suita, Osaka, Japan)
AJTEC2011-44071
Defect-Induced Thermal Rectification: Numerical Study on Carbon Nanotube and FPU-beta Lattice,
Hiroyuki Hayashi, Koji Takahashi (Kyushu University, Fukuoka, Japan)
AJTEC2011-44136
Tunable Thermal Conductivity of TiO2 Films of Close-Packed Nanoparticles, Patrick Hopkins (Sandia
National Laboratories, Albuquerque, NM, United States), Manish Mittal (University of Delaware, Newark,
DE, United States), Leslie Phinney, Anne M. Grillet (Sandia National Laboratories, Albuquerque, NM,
United States), Eric M. Furst (University of Delaware, Newark, DE, United States)
AJTEC2011-44521
Thermal Rectification in Graphene and Carbon Nanotube Systems Using Molecular Dynamics
Simulations, Ajit Vallabhaneni, Jiuning Hu, Yong P Chen, Xiulin Ruan (Purdue University, Lafayette, IN,
United States)
33
Room: Milo IV&V
3-3-4 Interfacial Phenomena and Thermal Properties - 1
Session Organizer: Ingrid Cotoros (Lockheed Martin, Advanced Technology Center, Palo Alto, CA, United States)
Session Co-Organizer: Gota Kikugawa (Tohoku University, Sendai, Japan)
AJTEC2011-44496
Sensing Changes of Surface Properties of Oxygen Nano-Bubbles in Water by the Ripplon Surface
Laser-Light Scattering, Yuma Ichikawa, Yu Nishimura, Yuji Nagasaka (Keio University, Yokohama,
Japan)
AJTEC2011-44070
Micro-Patterned Substrates with Nano-Scale Elements for Pool Boiling, Chad Hunter (Air Force
Research Laboratory, Materials and Manufacturing Directorate, WPAFB, OH, United States), Nicholas R.
Glavin (Air Force Research Laboratory, Materials and Manufacturing Directorate, Dayton, OH, United
States), S.A. Putnam, A.N. Khramov (University Technology Corporation, Dayton, OH, United States), C.
Muratore (Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson
AFB, OH, United States), T.S. Fisher (Birck Nanotechnology Center, West Lafayette, IN, United States),
J.G. Jones (Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson
AFB, OH, United States), Calvin Hong Li (Villanova University, Villanova, PA, United States)
AJTEC2011-44447
Molecular Dynamics Simulations and Kaptiza Conductance Prediction of Si/Au Systems Using the New
Full 2 nn Meam Si/Au Cross-Potential, Carolina Abs da Cruz (Centre de Thermique de Lyon CETHIL
UMR5008, Université de Lyon, INSA de Lyon, CNRS,Université Lyon1, Villeurbanne, France), Patrice
Chantrenne (Centre de Thermique de Lyon CETHIL UMR5008, Villeurbanne, France), Xavier Kleber
(CETHIL UMR5008, Université de Lyon, INSA de Lyon, CNRS,Université Lyon1, Villeurbanne, France)
AJTEC2011-44657
Modeling Grain Boundary Scattering and Thermal Conductivity of Polysilicon Using an Effective
Medium Approach, Timothy S. English, Justin L. Smoyer, John C. Duda, Pamela Norris (University of
Virginia, Charlottesville, VA, United States), Thomas E. Beechem, Patrick Hopkins (Sandia National
Laboratories, Albuquerque, NM, United States)
Room: Milo IV&V
3-3-5 Interfacial Phenomena and Thermal Properties - 2
Session Organizer: Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United States)
Session Co-Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan)
AJTEC2011-44169
Development of a High Performance Thermal Interface Material With Vertically Aligned Graphite
Platelets, Yuan Zhao, Dennis R Strauss, Tony Liao (Teledyne Scientific & Imaging, Thousand Oaks, CA,
United States), Ya-chi Chen, Chung-Lung Chen (Teledyne Scientific, Thousand Oaks, CA, United States)
AJTEC2011-44135
Contributions of Anharmonic Phonon Interactions to Thermal Boundary Conductance, Patrick Hopkins
(Sandia National Laboratories, Albuquerque, NM, United States), John C. Duda, Pamela Norris
(University of Virginia, Charlottesville, VA, United States)
AJTEC2011-44333
Thermal Boundary Conductance Between Thin Metal Films and Graphite Substrates, Justin L. Smoyer
(University of Virginia, Charlottesville, VA, United States), John C. Duda, Pamela Norris, Arthur W.
Lichtenberger (University of Virginia, Charlottesville, VA, United States)
Room: Milo IV&V
3-3-10 Nanofluids and Microchannels
Session Organizer: Qingjun (Steve) Cai (Teledyne Scientific Company, Thousand Oaks, CA, United States)
34
AJTEC2011-44310
Laminar Mixed Convection Nanofluids Flow in a Elliptic Duct Using Two Phase Approach, Alireza
Akbarinia (Institute for Electromagnetic Theory and Microelectronics, University of Bremen, Bremen,
Germany), Mohammad Shariat (University of Sistan and Baluchestan, Zahedan, Iran), Rainer Laur
(Institute for Electromagnetic Theory and Microelectronics, University of Bremen, Bremen, Germany)
AJTEC2011-44213
The Impact of Converging and Diverging Angle on the X-Shaped Micro-Channels, Tu Shu-Min, Shuichii
Torii (Kumamoto University, Kumamoto, Japan), Yang-Cheng Shih (National Taipei University of
Technology, Taipei, Taiwan)
AJTEC2011-44088
Characterization of Hybrid-Wicked Copper Heat Pipe, Chen Li, Xianming Dai (University of South
Carolina, Columbia, SC, United States), Levey T. Tran (University of Colorado, Boulder, CO, United
States), Fanghao Yang (University of South Carolina, Mechanical Eng., Columbia, SC, United States),
Ronggui Yang, YC Lee (University of Colorado, Boulder, CO, United States), Bo Shi (University of
Nanjing Science and Technology, Nanjing, Jiangsu, China)
35
Wednesday, March 16
Room: Kona Moku
9:00-9:40, Wednesday, March 16
4-1-5 Keynote - 5
AJTEC2011-44611
Significance of Micro-Scall Mass Transport Phenomena on Fuel Cells and CO2 Sequestration, Shuichiro
Hirai, Shohji Tsushima, Suguru Uemura (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kona Moku
4-1-6 Keynote - 6
Session Organizer: Joerg Petrasch (University of Florida, Gainesville, FL, United States)
AJTEC2011-44581
Solar Thermal Fuel Production, Christian Sattler (German Aerospace Center, Cologne, Koln, Germany),
Hans Muller-Steinhagen (Technical University of Dresden, Dresden, Germany), Martin Roeb, Dennis
Thomey, Martina Neises (German Aerospace Center, Cologne, Koln, Germany)
Room: Honolulu
1-4-3 Droplets and Sprays
Session Organizer: Yoshimichi Hagiwara (Kyoto Institute of Technology, Kyoto, Japan)
Session Co-Organizer: Panneer Selvam (University of Arkansas, Fayetteville, AR, United States)
AJTEC2011-44044
Numerical Analysis of Microdroplet Impact and Evaporation on a Solid Surface, Gihun Son (Sogang
University, Seoul, Korea (Republic))
AJTEC2011-44158
Coupling of Hydrodynamics, Vaporization and Reaction with Liquid Spray Injection into a
High-Temperature Gas-Solid Reactor, Dawei Wang, Rajesh Patel, Chao Zhu (New Jersey Institute of
Technology, Newark, NJ, United States), Teh C. Ho (Corporate Strategic Research Laboratories,
Annandale, NJ, United States)
AJTEC2011-44331
Spray Cooling Heat Transfer Enhancement and Degradation Using Fractal-Like Micro-Structured
Surfaces, Alex Tulchinsky, Deborah Pence, James Liburdy (Oregon State University, Corvallis, OR,
United States)
Room: Honolulu
1-4-1 Two-Phase Flow Phenomena in General - 1
36
Session Organizer: John Crepeau (University of Idaho, Moscow, ID, United States)
Session Co-Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)
AJTEC2011-44625
Interaction Between Two Falling Droplets in the Liquid-Liquid Two Phase Flow, Nao Ninomiya, Takeshi
Mori (Utsunomiya University, Utsunomiya, Tochigi, Japan)
AJTEC2011-44406
The Effect of Fine Particles Added into Water on the Motion of Bubbles Rising Helically, Hisato
Minagawa, Takahiro Yasuda (The University of Shiga Prefecture, Hikone, Shiga, Japan)
AJTEC2011-44089
Mass Transfer from a Bubble in a Vertical Pipe, Shogo Hosoda, Ryosuke Sakata, Kosuke Hayashi, Akio
Tomiyama (Kobe University, Kobe, Japan)
Room: Honolulu
Session Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)
Session Co-Organizer: John Crepeau (University of Idaho, Moscow, ID, United States)
AJTEC2011-44546
Characteristics of Air-Oil Slug Flow in Inclined Pipe Using Tomographic Techniques, Lokman
Abdulkareem, B.J. Azzopardi, Sharaf Safa, Valente Hernandez-perez (University of Nottingham,
Nottingham, United Kingdom)
AJTEC2011-44114
A Mechanistic Heat Transfer Correlation for Non-Boiling Two-Phase Flow in Horizontal, Inclined and
Vertical Pipes, Clement C. Tang, Afshin J. Ghajar (Oklahoma State University, Stillwater, OK, United
States)
AJTEC2011-44606
Experimental Investigation of Two-Phase Flow in a Multi-Branch Reduced T-Junction with Co-Current
Stratified Gas-Liquid Flow, Robert Bowden, Ibrahim Hassan (Concordia University, Montreal, QC,
Canada)
Room: Honolulu
Session Organizer: Weilin Qu (University of Hawaii at Manoa, Honolulu, HI, United States)
Session Co-Organizer: Yoshimichi Hagiwara (Kyoto Institute of Technology, Kyoto, Japan)
AJTEC2011-44187
Rewetting Processes During Top/Bottom Re-Flooding of Heated Vertical Surfaces, Muhammad Ilyas,
Masroor Ahmad, Colin Hale, Simon P Walker, Geoffrey F Hewitt (Imperial College London, London,
United Kingdom)
AJTEC2011-44028
Optimization of the Relationship Between the Two-Phase Friction Factor and Reynolds Equivalent
Number Model by Means of Genetic Algorithm, Berna Bolat, Muhammet Balcilar, Ahmet Selim Dalkilic
(Yildiz Technical University, Istanbul, Turkey), Somchai Wongwises (King Mongkut's University of
Technology Thonburi, Bangkok, Thailand)
AJTEC2011-44573
Thermal Fluctuations and Heat Transfer Measurements in a Externally Heated Rotary Cylinder,
Koteswara Rao Sunkara, Fabian Herz, Eckehard Specht (Otto von Guericke University Magdeburg,
Magdeburg, Saxony Anhalt, Germany)
Room: Kou
1-7-1 Heat and Mass Transfer in Micro-Scale Systems - 1
Session Organizer: Debjyoti Banerjee (Texas A&M University, College Station, TX, United States)
37
Session Co-Organizer: Yuji Suzuki (The University of Tokyo, Tokyo, Japan)
AJTEC2011-44356
Liquid Supply and Heat Transfer Performance of Sintered Cu Monolayer Wicks for Phase Change Heat
Transfer Applications, Stephen Sharratt (UCLA - MAE Department, Los Angeles, CA, United States),
Youngsuk Nam (Massachusetts Institute of Technology, Cambridge, MA, United States), Y. Sungtaek Ju
(UCLA - MAE Department, Los Angeles, CA, United States)
AJTEC2011-44056
Charging Station of a Planar Miniature Thermal Ground Plane, Mohammed Ababneh, Frank Gerner,
Doug Hurd (University of Cincinnati, Cincinnati, OH, United States), Peter de Bock, Shakti Chauhan, Tao
Deng (GE Global Research Center, Niskayuna, NY, United States)
AJTEC2011-44654
Development of a Compact Micro Pulsating Heat Pipe, Young Jik Youn, Sung Jin Kim (Korea Advanced
Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic))
Room: Kou
Session Organizer: Vinod Narayanan (Oregon State University, Corvallis, OR, United States)
Session Co-Organizer: Yasuo Kawaguchi (Tokyo University of Science, Noda, Japan)
AJTEC2011-44038
A Microstructure Device for Single Phase Surface Cooling, Juergen J. Brandner, Stefan Maikowske,
Natrah Kamaruzaman (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)
AJTEC2011-44113
Analysis of Laminar Slip-Flow Thermal Transport in Microchannels with Transverse Rib and Cavity
Structured Superhydrophobic Walls at Constant Heat Flux, Daniel Maynes, Brent Webb, Vladimir
Soloviev (Brigham Young University, Provo, UT, United States)
AJTEC2011-44631
Fluid Flow Characteristics in Microchannels with Rib-Patterned Surface, Toru Yamada (The University of
Rhode Island, Kingston, RI, United States), Chungpyo Hong (Tokyo Univeristy of Science, Chiba, Japan),
Otto Gregory, Mohammad Faghri (The University of Rhode Island, Kingston, RI, United States)
AJTEC2011-44583
Experimental Study and Numerical Analysis of Water Single-Phase Pressure Drop Across an Array of
Circular Micro-Pin-Fins, Jonathan R. Mita, Weilin Qu, Marcelo H. Kobayashi (University of Hawaii at
Manoa, Honolulu, HI, United States), Frank E. Pfefferkorn (University of Wisconsin-Madison, Wisconsin,
WI, United States)
Room: Kou
Session Organizer: Naoki Shikazono (The University of Tokyo, Tokyo, Japan)
Session Co-Organizer: Deborah Pence (Oregon State University, Corvallis, OR, United States)
AJTEC2011-44655
The Effect of Channel Diameter on Heat Transfer Characteristics of Two-Phase Flow in Microchannels,
Kyosung Choo, Daniel Trainer, Sung Jin Kim (Korea Advanced Institute of Science and Technology,
Daejeon, Yuseong-gu, Korea (Republic))
AJTEC2011-44551
Heat Transfer and Pressure Drop During Condensation of R-134a Inside Parallel Microchannels, Gil Goss
Jr., Stefano Frasson Macarini, Júlio César Passos (Federal University of Santa Catarina, Florianópolis,
Brazil)
AJTEC2011-44079
Flow Boiling Heat Transfer of Ternary Mixture in a Micro-Channel, Inmyong Park (Korea Advanced
Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic)), Sehwan In (Samsung
Heavy Industries Co., Ltd., Geoje, Gyeongsangnam Do, Korea (Republic)), Sangkwon Jeong (Korea
38
Advanced Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic))
AJTEC2011-44176
An Experimental Study on Thermal Hydraulic Characteristics of a Steam Condensation Flow in a Circular
Microtube, Koji Iiyama, Akiko Kaneko, Yutaka Abe, Shingo Asaba (University of Tsukuba, Tsukuba,
Japan), Yutaka Suzuki (Welcon, Co. Ltd., Niigata, Japan)
Room: Kou
Session Organizer: Nao Ninomiya (Utsunomiya University, Utsunomiya, Japan)
Session Co-Organizer: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)
AJTEC2011-44374
Experimental Study of Thermal Performance of Nanofluids During Flow in Microchannels Using Surface
Temperature-Nano-Sensors, Seokwon Kang, Saeil Jeon, Debjyoti Banerjee (Texas A&M University,
College Station, TX, United States)
AJTEC2011-44353
Constrained Optimization of One-Dimensional Two-Phase Flow in Fractal-Like Branching Microchannel
Heat Sinks, Douglas Heymann, Deborah Pence (Oregon State University, Corvallis, OR, United States)
AJTEC2011-44563
Effect of 1D Cu Nanostructures on Heat Transfer Characteristics of Single Phase Microchannel Heat Sink,
Muhammad Yakut Ali, Fanghao Yang, Ruixian Fang, Chen Li, Jamil Khan (University of South Carolina,
Columbia, SC, United States)
AJTEC2011-44490
Impact of Surface Microstructures on Liquid Micro-Jet Array Impingement Cooling: Comparison
Between Single Phase and Phase Change Heat Transfer, Avijit Bhunia, Ya-chi Chen, Chung-Lung Chen
(Teledyne Scientific Company, Thousand Oaks, CA, United States)
Room: Waikiki 1
1-3-7 Two-Phase Flow and Heat Transfer - 1
Session Organizer: Hideo Yoshida (Kyoto University, Kyoto, Japan)
Session Co-Organizer: Frederick Best (Texas A&M University, College Station, TX, United States)
AJTEC2011-44118
Flow Boiling Characteristics for R1234ze in 1.0 and 2.2 mm Circular Channels, Cristiano B. Tibiriçá,
Gherhardt Ribatski (University of Sao Paulo, São Carlos, Sao Paulo, Brazil), John R. Thome (Ecole
Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland)
AJTEC2011-44026
Convective Boiling Heat Transfer Enhancement by Microgrooves in Plate Evaporator, Hirofumi Arima,
Nobuhiko Matsuo, Keita Shigyou (Saga University, Saga, Japan), Akio Okamoto (Kobe Steel, Ltd., Tokyo,
Japan), Yasuyuki Ikegami (Saga University, Saga, Japan)
AJTEC2011-44289
Study on Flow and Heat Transfer Characteristics of Tetra-n-Butyl Ammonium Bromide Hydrate Slurry,
Hiroyuki Kumano, Tetsuo Hirata, Yuki Kobayashi (Shinshu University, Nagano, Japan), Tomoya Kudoh
(Aishin Seiki Co., LTD., Aichi, Japan)
AJTEC2011-44116
Efficient Heat Transfer by Phase Transition in Microstructured Devices, Stefan Maikowske, Juergen J.
Brandner, Roland Dittmeyer (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)
Room: Waikiki 1
1-3-13 Two-Phase Flow and Heat Transfer - 2
Session Organizer: Tailian Chen (Gonzaga University, Spokane, WA, United States)
Session Co-Organizer: Satoru Momoki (Nagasaki University, Nagasaki, Japan)
39
AJTEC2011-44083
A Study of Critical Heat Flux During Flow Boiling in Microchannel Heat Sinks, Tailian Chen (Gonzaga
University, Spokane, WA, United States), Suresh V. Garimella (Purdue University, West Lafayette, IN,
United States)
AJTEC2011-44292
Flow Instability and Critical Heat Flux for Flow Boiling of Water in a Vertical Annulus at Low Pressure,
Christoph Haas, Leonhard Meyer, Thomas Schulenberg (Karlsruhe Institute of Technology,
Eggenstein-Leopoldshafen, Baden-Württemberg, Germany)
AJTEC2011-44661
Characterization of a Dual Chambered Two Phase Separator, Frederick Best, Cable Kurwitz, Casey Klein
(Texas A&M University, College Station, TX, United States)
AJTEC2011-44514
Experimental and Numerical Study on Growth of Single Vapor Bubble in Upward Flow Through Vertical
Mini-Tube, Hiroshi Iwai, Motohiro Saito, Yuichi Kami, Yasuhiro Niina, Hideo Yoshida (Kyoto University,
Kyoto, Japan)
Room: Waikiki 1
1-3-14 Evaporation of Liquid Film and Impinging Droplets - 1
Session Organizer: Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Japan)
Session Co-Organizer: Jorge Alvarado (Texas A&M, College Station, TX, United States)
AJTEC2011-44501
Falling Water Film Evaporation on Horizontal Finned Tube Arrays at Low Pressure, Xiao-Yu Wu, Wei Li
(Zhejiang University, Hangzhou, Zhejiang Province, China), Zhong Luo (Wolverine Tube (Shanghai) Co.
Ltd, Shanghai, China)
AJTEC2011-44597
Multi-Nozzle Spray Cooling in a Closed Loop, Quinn Leland (Air Force Research Laboratory, WPAFB,
OH, United States), Lanchao Lin (University of Dayton Research Institute, Dayton, OH, United States)
AJTEC2011-44533
Measurements of Rewetting Temperatures of Hot Dry Surface in Saturated and Subcooled Film Boiling,
Hiroyasu Ohtake, Nozomi Nagashima (Kogakuin University, Tokyo, Japan), Yasuo Koizumi (Shinshu
University, Ueda, Nagano, Japan)
AJTEC2011-44211
Effect of Cooling Water Temperature on Impinging Jet Heat Transfer on Hot Steel Plate, Jungho Lee,
Cheong-Hwan Yu, Kyu Hyung Do (Korea Institute of Machinery and Materials, Deajeon, Korea
(Republic))
Room: Waikiki 1
1-3-15 Evaporation of Liquid Film and Impinging Droplets - 2
Session Organizer: Naoki Shikazono (The University of Tokyo, Tokyo, Japan)
Session Co-Organizer: Joel Plawsky (Rensselaer Polytechnic Institute, Troy, NY, United States)
AJTEC2011-44652
Two-Phase Cooling Characteristics of Mono-Dispersed Droplets Impacted on a Heated Surface, Seyed
Reza Mahmoudi, Kaz Adamiak, Peter Castle (University of Western Ontario, London, ON, Canada)
AJTEC2011-44509
Multiple Droplet Impingements on Nanostructured Surfaces for Enhanced Spray Cooling, Jorge Alvarado
(Texas A&M, College Station, TX, United States), Yen-Po Lin (University of Illinois at Urbana
Champaign, Urbana, IL, United States)
AJTEC2011-44388
Sub-Atmospheric Mini-Jet Impingement Boiling of Water Under Saturated and Subcooled Conditions,
Ruander Cardenas, Preeti Mani, Vinod Narayanan (Oregon State University, Corvallis, OR, United
States)
40
AJTEC2011-44512
Study on Cooling of Hot Water by Air Flow with Evaporation, Yasuo Koizumi, Yutaka Ebihara (Shinshu
University, Ueda, Nagano, Japan), Michio Murase (INSS, Mihama, Fukui, Japan)
Room: Waikiki 2
1-2-2 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues) - 1
Session Organizer: Masayuki Kaneda (Osaka Prefecture University, Sakai, Osaka, Japan)
AJTEC2011-44100
Quantitative Evaluation of the Thickness of the Free Surface by the Interface-Tracking Method, Y. Saito, K.
Yasumura, Masakazu Shoji (Tohoku University, Sendai, Miyagi, Japan), Yohsuke Matsushita (Kyushu
University, Kasuga, Fukuoka, Japan), Hideyuki Aoki, Takatoshi Miura (Tohoku University, Sendai,
Miyagi, Japan), S. Ogasawara, M. Daikoku (Hachinohe Institute of Technology, Hachinohe, Aomori,
Japan), M. Shirota, T. Inamura (Hirosaki University, Hirosaki, Aomori, Japan)
AJTEC2011-44109
Thermodiffusion in a Binary Fluid Mixture Subject to External Vibrations: Effect of Variable Physical
Properties, Aram Parsa, Ziad Saghir (Ryerson, Toronto, ON, Canada)
AJTEC2011-44138
Simulation of Heat and Mass Transfer Involving Vapour Condensation in the Presence of
Non-Condensable Gases in Plane Channels, Mohammad Saraireh (Victoria University, School of
Engineering and Science, Melbourne, Victoria, Australia), Graham Thorpe (Victoria University, Centre
for Environmental Safety and Risk Engineering, Melbourne, Victoria, Australia), Jun-De Li (Victoria
University, School of Engineering and Science, Melbourne, Victoria, Australia)
Room: Waikiki 2
1-2-10 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues) - 2
Session Organizer: Wensheng Lin (Shanghai Jiao Tong University, Shanghai, China)
AJTEC2011-44200
Prediction of Turbulent Convective Heat Transfer to Supercritical CH4/N2 Mixture in a Vertical Circular
Tube, Zhongxuan Du, Wensheng Lin, Anzhong Gu (Shanghai Jiao Tong University, Shanghai, China)
AJTEC2011-44236
Application of Immersed-Boundary Method to Complex Geometry Flows with Heat Transfer, Chao-An
Lin, Chuan-Chieh Liao (National Tsing Hua University, Hsinchu, Taiwan)
AJTEC2011-44268
Surface Vortex Simulation at Selected Water Temperatures, Aljaz Skerlavaj, Andrej Lipej (Turboinatitut
d.d., Ljubljana, Slovenia), Jure Ravnik, Leopold Skerget (University of Maribor, Maribor, Slovenia)
AJTEC2011-44027
Modelling of Combined Heat and Mass Transfer of Water Droplets in Thermal Technology Equipment,
Stasys Sinkunas, Gintautas Miliauskas, Kristina Norvaisiene, Kestutis Sinkunas (Kaunas University of
Technology, Kaunas, Lithuania)
Room: Waikiki 2
1-2-1 Computational Heat and Mass Transfer (Thermal CFD) - 1
Session Organizer: Tomoya Houra (Nagoya Institute of Technology, Nagoya, Japan)
AJTEC2011-44405
Numerical and Experimental Investigation of Temperature and Flow Fields in a Full Vehicle, Devadatta
Mukutmoni, Jaehoon Han (Exa Corporation, Livonia, MI, United States), Ales Alajbegovic (Exa
Corporation, Ann Arbor, MI, United States)
AJTEC2011-44295
Internal Turbine Blade Cooling Simulation: Advanced Models Assessment on Ribbed Configurations,
Florian Guillou, Francois Chedevergne (ONERA - DEFA, Chatillon Cedex, France)
41
AJTEC2011-44371
Fundamental Study of Turbulence-Radiation Interaction in Turbulent Channel Flow Using Direct
Numerical Simulation, Atsushi Sakurai, Koji Matsubara (Niigata University, Niigata, Japan), Shigenao
Maruyama (Tohoku University, Sendai, Miyagi, Japan)
AJTEC2011-44278
Numerical Simulation for Heat and Fluid Flow Through Porous Media, Masayuki Kaneda, Yusuke
Matsushima, K Suga (Osaka Prefecture University, Sakai, Osaka, Japan)
Room: Waikiki 2
1-2-9 Computational Heat and Mass Transfer (Thermal CFD) - 2
Session Organizer: Atsushi Sakurai (Niigata University, Niigata, Japan)
AJTEC2011-44121
CFD Modelling with Buoyancy Effects for a Heat and Moisture Transfer Ceiling Panel, Melanie
Fauchoux (University of Saskatchewan, Saskatoon, SK, Canada), Prabal Talukdar (Indian Institute of
Technology, New Delhi, India), Carey Simonson, David Torvi (University of Saskatchewan, Saskatoon,
SK, Canada)
AJTEC2011-44009
CFD Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic
Characteristics in the Rod Bundles with Grid Spacer, C.C. Liu, Yuh-Ming Ferng, C. K. Shih, Bau-Shei Pei
(National Tsing Hua University, Hsinchu, Taiwan)
AJTEC2011-44431
A CFD Analysis of Transverse Airflow Around the Exterior of an Aircraft Fuselage Inside a Large
Enclosure, Yaamunan Venkatesan, Rohitha Paruchuri, T. S. Ravigururajan (Wichita State University,
Wichita, KS, United States)
Room: Waikiki 3
1-1-3 Single Phase Convection - 1
Session Organizer: Masaaki Motozawa (Tokyo University of Science, Noda, Japan)
Session Co-Organizer: Yaroslav Chudnovsky (Gas Technology Institute, Des Plaines, IL, United States)
AJTEC2011-44007
Heat Transfer and Fluid Flow Characteristics Over Streamlined Symmetrical Body Positioned at
Unfavorable Angles to the Flow, M.Bassam Nabhan (University of Bahrain, A’Ali, Central, Bahrain)
AJTEC2011-44067
Transient Heat Transfer from a Horizontal Plate in Forced Flow of Various Gases, Qiusheng Liu (Kobe
University, Kobe, Hyogo, Japan), Makoto Shibahara (Osaka University, Suita, Osaka, Japan), Katsuya
Fukuda (Kobe University, Kobe, Hyogo, Japan)
AJTEC2011-44091
From Chip to Cooling Tower Data Centre Modelling: Influence of Air-Stream Containment on Operating
Efficiency, Thomas J. Breen (Univeristy of Limerick, Limerick, Ireland), Ed J. Walsh, Jeff Punch (Stokes
Institute, University of Limerick, Limerick, Ireland), Amip J. Shah, Cullen E. Bash, Brandon Rubenstein,
Scot Heath, Niru Kumari (Hewlett Packard Company, Palo Alto, CA, United States)
AJTEC2011-44383
Case Study for Energy-Efficiency of Liquid-Cooled Data Centers, Ricardo Rivera-Lopez, Mark Kimber
(University of Pittsburgh, Pittsburgh, PA, United States)
Room: Waikiki 3
Session Organizer: Kenichiro Takeishi (Osaka University, Osaka, Japan)
AJTEC2011-44377
Proper Orthogonal Decomposition of Husir's Temperature and Velocity Fields, Anthony DiCarlo,
42
Kimberly H. Chung (MITRE Corportation, Bedford, MA, United States)
AJTEC2011-44432
Modeling Airflow Inside an Aircraft Interior with Multiple Inlets and Outlets, Rohitha Paruchuri,
Yaamunan Venkatesan, T. S. Ravigururajan (Wichita State University, Wichita, KS, United States)
AJTEC2011-44259
Testing of Rectangular Channels with Perturbed Entrances for Temperature Difference under Constant
Heat Flux, Tunde Bello-Ochende, Jacek Matyja (University of Pretoria, Preotia, Gauteng, South Africa)
AJTEC2011-44246
Flow Characteristics Over a Backward-Facing Step in a Duct in Low Reynolds Number Range, Nobuyuki
Suyama, Kyoji Inaoka, Mamoru Senda (Doshisha University, Kyotanabe, Kyoto, Japan)
Room: Waikiki 3
Session Organizer: Kaoru Iwamoto (Tokyo University of Agriculture and Technology, Tokyo, Japan)
AJTEC2011-44530
Channel Flow Along a Wavy Heated Wall, Sergey Barboy, Alex Rashkovan, Gennady Ziskind
(Ben-Gurion University, Beer-Sheva, Israel)
AJTEC2011-44536
Large Eddy Simulation of Film Cooling with Swirling Coolant Flow, Yutaka Oda, Kenichiro Takeishi, Dai
Shimizu (Osaka University, Suita, Osaka, Japan)
AJTEC2011-44541
Film Cooling Effectiveness Distributions on a Flat Plate with a Double Hole Geometry Using PSP, Lesley
Wright, Evan Martin (Baylor University, Waco, TX, United States)
AJTEC2011-44350
Average Nusslet Number Correlations for Pressure and Suction Sides of Squealer Turbine Blade Tip,
Chaouki Ghenai (Florida Atlantic University, Boca Raton, FL, United States)
Room: Waikiki 3
Session Organizer: Yutaka Oda (Osaka University, Osaka, Japan)
AJTEC2011-44623
Design of Miniature Liquid Cooler for LED, Henrik Soerensen, Soeren N. Bertel (Aalborg University,
Aalborg, Denmark)
AJTEC2011-44626
Scaling Laws for Electrohydrodynamic Air Movers, Nels Jewell-Larsen, Gustavo Joseph, Kenneth Honer
(Tessera, Inc., San Jose, CA, United States)
AJTEC2011-44640
Thermal Dispersion in Metal Foams, Theresa B. Hoberg, Kenshiro Muramatsu, Erica M. Cherry, John K.
Eaton (Stanford University, Stanford, CA, United States)
AJTEC2011-44178
Entropy Generation Rate in Forced Convection Flow about Inclined Surfaces in a Porous Medium,
Bourhan Tashtoush, Bekir S. Yilbas (KFUPM, Dhahran, Dammam, Saudi Arabia)
Room: Kona Moku B
43
2-1-3 Heat and Mass Transfer in Turbulent Combustion III
Session Organizer: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan)
Session Co-Organizer: OA Ezekoye (University of Texas, Austin, TX, United States)
AJTEC2011-44473
DNS of Turbulent Premixed Flames and Heat Transfer in a Constant Volume Vessel, Naoya Fukushima,
Akihiko Tsunemi, Masayasu Shimura, Youngsam Shim, Mamoru Tanahashi, Toshio Miyauchi (Tokyo
AJTEC2011-44422
Computational Test Design for High-Speed Liquid Impact and Dispersal, Alex Brown, Kurt E. Metzinger
(Sandia National Labs, Albuquerque, NM, United States)
AJTEC2011-44290
Effects of Diluent Gases on Combustion of Coal Gasification Gas: Comparison Between N2 and CO2
Dilution, Yukihide Nagano, Kunihoro Kado, Tomohiro Takeo, Yukito Miki, Toshiaki Kitagawa (Kyushu
AJTEC2011-44476
DNS on Autoignition and Flame Propagation of Inhomogeneous Methane-Air Mixtures in a Closed Vessel,
Makito Katayama, Naoya Fukushima, Masayasu Shimura, Mamoru Tanahashi, Toshio Miyauchi (Tokyo
Room: Milo III
2-5-1 Heat and Mass Transfer in Air Conditioning and Refrigeration - I
Session Organizer: Shigeru Koyama (Kyushu University, Fukuoka, Japan)
Session Co-Organizer: S.A. Sherif (University of Florida, Gainesville, FL, United States)
AJTEC2011-44215
Influence of Inserting the Heat Pipe into the MH Particle Bed on the Refrigeration Performance, Sangchul
Bae (Waseda University, Honjo, Saitama, Japan), Masafumi Katsuta, Keisuke Ishikawa, Yusuke Haruna,
Eiji Morita (Waseda University, Tokyo, Japan)
AJTEC2011-44019
Analysis of Heat Transfer Characteristics in Liquefaction Processes of CBM with High Nitrogen Content,
Wensheng Lin, Ting Gao, Anzhong Gu (Shanghai Jiao Tong University)
AJTEC2011-44163
Heat-Pump-Based Thermal Storage for Intermittent Electrical and Thermal Sources, Patrick Phelan,
Ronald Calhoun, Steven Trimble, James E Baker, Jon Sherbeck (Arizona State University, Tempe, AZ,
United States)
Room: Milo III
2-5-2 Heat and Mass Transfer in Air Conditioning and Refrigeration - II
Session Organizer: S.A. Sherif (University of Florida, Gainesville, FL, United States)
Session Co-Organizer: Shigeru Koyama (Kyushu University, Fukuoka, Japan)
AJTEC2011-44393
Feasibility of Vortex Tube Air-Conditioning System, Mohammad Hamdan, Emad Elnajjar, Ahmed
Alawar, Waseem Siddique (United Arab Emirates University, Alain, Abu Dhabi, United Arab Emirates)
AJTEC2011-44482
Air Cleaning Method with Humidity Swing Operation for Reducing Suspended Particulate Matters,
Nagisa Onoda, Osamu Nakabeppu (Meiji University, Kawasaki, Kanagawa, Japan)
AJTEC2011-44591
Water Vapor Adsorption - Desorption Behavior of a Small Piece of Desiccant Rotor in Temperature Swing,
Akio Kodama, Yasuko Washio (Kanazawa University, Kanazawa, Japan), Kumiko Okamoto (Mitsubishi
Plastic, Inc., Yokohama, Japan), Yugo Osaka (Kanazawa University, Kanazawa, Japan)
44
Room: Milo III
2-3-1 Autoignition and Performance in Engines
Session Organizer: Takemi Chikahisa (Hokkaido University, Sapporo, Hokkaido, Japan)
Session Co-Organizer: Chao Zhang (University of Western Ontario, London, ON, Canada)
AJTEC2011-44282
A Study of HCCI Combustion Characteristics by Using Light Emission and Absorption Spectroscopy,
Akira Iijima, Koji Yoshida, Hideo Shoji (Nihon University, Chiyoda-ku, Tokyo, Japan)
AJTEC2011-44466
Experimental Study on Combustion in Miniature Glow Ignition Engine - Detection of Spontaneous Light
Emission and Pressure -, Daisuke Kuno, Masaaki Motozawa, Yasuo Kawaguchi (Tokyo University of
Science, Noda, Chiba, Japan)
AJTEC2011-44202
A Computational Study on the Effects of Pre-Ignition Processes on Diesel Engine Combustion and
Emissions, Suresh Aggarwal (University of Illinois at Chicago, Chicago, IL, United States), Douglas E.
Longman (Argonne National Laboratory, Argonne, IL, United States)
AJTEC2011-44391
Engine Performance Characteristics Under Controlled Engine Temperature with Variable Operating
Parameters, R. K. Mandloi, A. Rehman (M.A.National Institute of Technology, Bhopal, India)
Room: Milo III
2-3-2 Engine Combustion Modeling for Control
Session Organizer: Suresh Aggarwal (University of Illinois at Chicago, Chicago, IL, United States)
Session Co-Organizer: Akira Iijima (Nihon University, Chiyoda-ku, Tokyo, Japan)
AJTEC2011-44203
Development of Diesel Engine Emissions Control Models Based on Heat Release Rate Analysis of
Combustion Processes, Dong Wang, Chao Zhang (University of Western Ontario, London, ON, Canada)
AJTEC2011-44459
Study on Simple and High-Speed Diesel Combustion Model for Driving Mode Simulator Available for
Premixed and Diffusion Combustion of Sprays, Takemi Chikahisa, Yutaka Tabe (Hokkaido University,
Sapporo, Hokkaido, Japan), Kazushige Kikuta (Tomakomai National College of Technology, Tomakomai,
Japan), Abu Shadat Muhammad Sayem (Hokkaido University, Sapporo, Hokkaido, Japan)
AJTEC2011-44035
Multidimensional Modeling of Temperature Distribution in Engine Combustion Chamber, Yuanhong Li,
Song-Charng Kong (Iowa State University, Ames, IA, United States)
AJTEC2011-44139
Shear Heating Effects in Modeling High Viscosity Oil Piston Skirts EHL in Idling Speeds Initial Engine
Start Up, Syed Adnan Qasim, M. Afzaal Malik, Mumtaz Ali Khan (National University of Sciences and
Technology, Rawalpindi, Punjab, Pakistan), Riaz Ahmed Mufti (National University of Sciences and
Technology, Islamabad, Punjab, Pakistan)
Room: Kona Moku A
3-2-7 Nanoscale Transport Phenomena during Thermal Conduction - 1
45
Session Co-Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Hiroshima, Japan)
AJTEC2011-44339
First-Principles-Based Interatomic Potential for Si and Its Thermal Conductivity, Keivan Esfarjani, Gang
Chen (Massachusetts Institute of Technology, Cambridge, MA, United States), Asegun Henry (Georgia
Institute of, Atlanta, GA, United States)
AJTEC2011-44107
Thermal Transport in LEDs for Solid State Lighting, Zonghui Su, Jonathan A. Malen, Jacob H. Melby,
Robert F. Davis (Carnegie Mellon University, Pittsburgh, PA, United States)
AJTEC2011-44094
Quasi-Ballistic Heat Transfer from Metal Nanostructures on Sapphire, Austin Minnich, Gang Chen
(Massachusetts Institute of Technology, Cambridge, MA, United States)
Room: Milo IV&V
3-3-6 Thermal Properties and Performance of Nanofluids
Session Organizer: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States)
AJTEC2011-44649
Thermal Conductivity Affected by Temperature and Particle Size in Al2O3-Water Nanofluids, Fei Duan, D.
Kwek, A. Crivoi (School of Mechanical and Aerospace Engineering, Singapore, Singapore)
AJTEC2011-44372
A Simple Analytical Model for Specific Heat of Nanofluid with Tube Shaped and Disc Shaped
Nanoparticles, Seunghwan Jung, Debjyoti Banerjee (Texas A&M University, College Station, TX, United
States)
AJTEC2011-44375
Experimental Investigation of Molten Salt Nanofluid for Solar Thermal Energy Application, Donghyun
Shin, Debjyoti Banerjee (Texas A&M University, College Station, TX, United States)
AJTEC2011-44659
The Effective Thermal Conductivity of Water Based Alumina Nanofluids in the Fully Developed Laminar
Flow in a Circular Tube Under a Constant Wall Heat Flux Condition, Young Su Na, Joon Sik Lee (Seoul
National University, Seoul, Gwanak-gu, Korea (Republic)), Kenneth Kihm (University of Tennessee,
Knoxville, TN, United States)
Room: Milo IV&V
3-3-7 Thermal Properties of Nanoporous and Nanostructured Materials
Session Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States)
Session Co-Organizer: Takashi Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Japan)
AJTEC2011-44046
Thermal Conductivity of Sol-Gel Amorphous Mesoporous Silica Thin Films: Molecular Dynamics
Simulations versus Experiments, Thomas Coquil, Laurent Pilon (University of California, Los Angeles,
Los Angeles, CA, United States)
AJTEC2011-44047
Thermal Conductivity of Amorphous and Crystalline Mesoporous Titania Thin Films From 30 to 320 K,
Jin Fang (University of California, Los Angeles, Los Angeles, CA, United States), Christian Reitz,
Torsten Brezesinski (Justus-Liebig-University of Giessen, Giessen, Germany), E. Joseph Nemanick, Sarah
Tolbert, Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States)
AJTEC2011-44137
Estimating Density Reduction and Phonon Localization from Optical Thermal Conductivity
Measurements of Porous Silica and Aerogel Thin Films, Patrick Hopkins, Bryan J Kaehr (Sandia National
Labs, Albuquerque, NM, United States), Darren Dunphy (Unversity of New Mexico, Advanced Materials
Lab, Albuquerque, NM, United States), C. Jeffrey Brinker (Sandia National Labs, Albuquerque, NM,
United States)
46
AJTEC2011-44571
In-Plane Thermal Conductivity of PEM Fuel Cell Gas Diffusion Layers, Ehsan Sadeghi, Ned Djilali
(University of Victoria, Victoria, BC, Canada), Majid Bahrami (Simon Fraser University, Surrey, BC,
Canada)
Room: Milo IV&V
3-3-8 Properties of Micro- and Nanomaterials - 1
Session Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)
Session Co-Organizer: Bong Jae Lee (University of Pittsburgh, Pittsburgh, PA, United States)
AJTEC2011-44315
Predicting Phonon Properties from Molecular Dynamics Simulations Using the Spectral Energy Density,
Joseph Turney, John Thomas, Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United
States), Cristina H. Amon (University of Toronto, Toronto, ON, Canada)
AJTEC2011-44160
Role of Chemical Ordering on Phononic Transport in Binary Alloys, John C. Duda, Timothy S. English,
Donald A. Jordan, Pamela Norris, William A. Soffa (Department of Mechanical and Aerospace
Engineering, University of Virginia, Charlottesville, VA, United States)
AJTEC2011-44644
Role of Interface Thermal Boundary Resistance, Straining and Morphology in Thermal Conductivity of a
Set of Si-Ge Superlattices and Biomimetic Si-Ge Nanocomposites, Vikas Samvedi, Vikas Tomar (Purdue
AJTEC2011-44548
Thermal Conductivity Augmentation in Polymeric Nanocomposites, Leandro Sphaier, Luiz Carlos Nunes,
João Marciano Reis, Debora C. Moreira (Universidade Federal Fluminense, Niteroi, RJ, Brazil)
Room: Milo IV&V
3-3-9 Properties of Micro- and Nanomaterials - 2
Session Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan)
Session Co-Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States)
AJTEC2011-44184
Size-Dependent Model for Thin Film Thermal Conductivity, Alan McGaughey (Carnegie Mellon
University, Pittsburgh, PA, United States), Daniel P. Sellan (University of Toronto, Toronto, ON, Canada),
Eric S. Landry (Lytron, Inc., Woburn, MA, United States), Cristina H. Amon (University of Toronto,
Toronto, ON, Canada)
AJTEC2011-44273
Impact on Thermal Conductivities of Nanostructured Bismuth Telluride Based Thin Films, Saburo Tanaka
(Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan), Masayuki Takashiri (Komatsu Ltd.,
Hiratsuka, Kanagawa, Japan), Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka,
Japan)
AJTEC2011-44337
Measurements of the Thermal Conductivity of Individual Alfa-Tetragonal Boron Nanoribbons, Juekuan
Yang, Scott Waltermire, Yang Yang, Deyu L (Vanderbilt Unviersity, Nashville, TN, United States), Xiaoxia
Wu, Terry Xu (The University of North Carolina at Charlotte, Charlotte, NC, United States)
47
Thursday, March 17
Room: Kona Moku
9:00-9:40, Thursday, March 17
4-1-8 Keynote - 7
Session Organizer: Kenji Yasuoka (Keio University, Yokohama, Japan)
AJTEC2011-44641
Micro and Extended-Nano Fluidics on Microchip for Chemistry and Bio-Medical Applications, Takehiko
Kitamori (The University of Tokyo, Tokyo, Japan)
Room: Kona Moku
4-1-7 AIChE Donald Q. Kern Award Lecture
Session Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)
AJTEC2011-44663
Nucleate Boiling Enhancements on Porous Graphite and Micro-Porous and Macro-Finned Copper
Surfaces, Mohamed El-Genk (University of New Mexico, Albuquerque, United States)
Room: Honolulu
1-9-1 Heat Transfer in Manufacturing - Session 1
Session Organizer: Ben Q. Li (University of Michigan, Dearborn, MI, United States)
Session Co-Organizer: Takushi Saito (Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44068
Scaling Thermocapillary Surface Velcoity in Weld Pool, Peng S. Wei, C. L. Lin (Dept. Mech.&
Electro-Mech. Eng., National Sun Yat-Sen University, Kaohsiung, Taiwan), C. N. Ting (Dragon Steel
Corporation, Taichung Hsien, Taiwan)
AJTEC2011-44017
Precise Control Method of Temperature Rising Speed of Wafer During Rapid Thermal Processing with
Lamp Heaters, Shigeki Hirasawa, Tsuyoshi Kawanami (Kobe University, Kobe, Japan)
AJTEC2011-44018
Experimental Study on Model Predictive Control to Minimize Temperature Change of Vertical Plate with
Varying Heat Generation, Shigeki Hirasawa, Tsuyoshi Kawanami (Kobe University, Kobe, Japan)
AJTEC2011-44384
Heat Transfer Analysis of a Novel Piezoelectric Air Pump, Andrew Eastman, Mark Kimber (University of
Pittsburgh, Pittsburgh, PA, United States), Atsuhiko Hirata, Gaku Kamitani (Murata Manufacturing Co.,
Ltd., Kyoto, Japan)
Room: Honolulu
48
Session Organizer: T. S. Ravigururajan (Wichita State University, Wichita, KS, United States)
Session Co-Organizer: Kazuyoshi Fushinobu (Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44108
Development of Heat Sinks for Air Cooling and Water Cooling Using Lotus-Type Porous Metals, Hideo
Nakajima (Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Japan), Hiroshi
Chiba (Mitsubishi Electric Corp., Amagasaki, Osaka, Japan), Tetsuro Ogushi (Hiroshima International
University, Kure, Japan)
AJTEC2011-44392
Thermal Analysis of Direct Chill Casting, Ashok Kumar Nallathambi, Mohit Tyagi, Eckehard Specht,
Albrecht Bertram (Otto von Guericke University, Magdeburg, Germany)
AJTEC2011-44366
Development of New Heat Exchanger Design, Anthony Couzinet, Daniel Pierrat, Laurent Gros (CETIM,
NANTES, France), Thierry Kunc (Bertin Technologies, Saint Quentin en Yvelines, France), Antoine
Foata (DGA Essais Propulseurs, Orsay, France)
Room: Honolulu
Session Co-Organizer: Shigeki Hirasawa (Kobe University, Kobe, Japan)
AJTEC2011-44455
Formation of Electro-Conductive Part on Polymeric Material Surface by CO2 Laser Irradiation, Takushi
Saito, Tatsuya Kawaguchi, Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44456
Laser Direct Joining Between Stainless Steel and Amorphous Polyamide Plastic, Yousuke Kawahito
(Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka, Japan), Koji Nishimoto (Anan
National College of Technology, Anan, Tokushima, Japan), Seiji Katayama (Joining and Welding
Research Institute, Osaka University, Ibaraki, Osaka, Japan)
AJTEC2011-44564
Thermal Effects During Hollow Polymer Fiber Drawing, Ashley Emery, Ann Mescher, Heather Dillon,
Spencer Grange (University of Washington, Seattle, WA, United States)
AJTEC2011-44240
FDTD Analysis of Ultra Short Pulse Laser Propagation in Transient Lens Effect, Munehiro Chijiiwa,
Kazuyoshi Fushinobu, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)
Room: Kou
Session Organizer: Hiroyasu Ohtake (Kogakuin University, Tokyo, Japan)
AJTEC2011-44064
Experimental Investigation of a Scaled-Up Passive Interdigital Micromixer with Circular-Sector Mixing
Elements, Kristina J. Cook, YanFeng Fan, Ibrahim Hassan (Concordia University, Montreal, QC,
Canada)
AJTEC2011-44218
Simultaneous Heat Transfer and Pressure Drop Measurements for a Horizontal Micro-Tube, Lap Mou Tam,
Hou Kuan Tam (University of Macau, Macau, China), Afshin J. Ghajar (Oklahoma State University,
Stillwater, OK, United States)
AJTEC2011-44570
Thermal Contact Resistance at Metal Foam-Solid Surface Interface, Ehsan Sadeghi (University of
Victoria, Victoria, BC, Canada), Scott Hsieh (Simon Fraser University, Burnaby, BC, Canada), Majid
Bahrami (Simon Fraser University, Surrey, BC, Canada)
AJTEC2011-44572
Finite Element Analysis of Reaction Front Tracking in Lime Calcination, P Ch Gourisankar Sandaka,
49
Ashok Kumar Nallathambi, Eckehard Specht (Otto Von Guericke University Magdeburg, Magdeburg,
Germany)
Room: Kou
1-2-5 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms) - 1
Session Organizer: Kosuke Nishida (Kyoto Institute of Technology, Kyoto, Japan)
AJTEC2011-44291
Thermal Optimization for Internal Embedded Conductive Cooling Schemes Using Topology
Optimization Techniques, Jaco Dirker, Josua P. Meyer (University of Pretoria, Preotia, Gauteng, South
Africa)
AJTEC2011-44082
Scale Effects on Thermal-Fluid Performance of Optimized Hierarchical Structures, Ercan M. Dede, Yan
Liu (Toyota Research Institute of North America, Ann Arbor, MI, United States)
AJTEC2011-44539
Evaluation of Uncertainties of One-Directional Analytical Model for Thermoreflectance Technique,
Changhu Xing, Zilong Hua, Heng Ban (Utah State University, Logan, UT, United States), David Hurley
(Idaho National Laboratory, Idaho Falls, ID, United States), J. Rory Kennedy (DOE Idaho National Lab,
Idaho Falls, ID, United States)
AJTEC2011-44565
Combining Meshless Analysis and Kalman Filters to Estimate Parameters When System Models are
Inaccurate, Ashley Emery (University of Washington, Seattle, WA, United States), Darrell Pepper
(University of Nevada, Las Vegas, Las Vegas, NV, United States)
Room: Kou
1-2-12 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms) - 2
Session Organizer: Yutaka Oda (Osaka University, Suita, Osaka, Japan)
AJTEC2011-44275
BEM Based Solution of Turbulent Flow over Periodic Hills with Heat Transfer, Leopold Skerget, Jure
Ravnik (University of Maribor, Maribor, Slovenia)
AJTEC2011-44318
Introduction of Object Oriented FEM Model Developed for Solving Thermal-Hydraulic Processes,
Dalibor Frydrych, MIlan Hokr (Technical University of Liberec, Liberec, Czech Republic)
AJTEC2011-44547
Comparisons Between Integral Transform, Finite Volumes and Combined Solution Strategies for
Convective Heat Transfer Problems, Daniel Chalhub, Leandro Sphaier (Universidade Federal Fluminense,
Niteroi, RJ, Brazil)
Room: Waikiki 1
1-3-1 Solid-Liquid Phase Change - 1
Session Organizer: Shuichii Torii (Kumamoto University, Kumamoto, Japan)
Session Co-Organizer: Deyu Li (Vanderbilt University, Nashville, TN, United States)
AJTEC2011-44653
Entropy Generation Analysis for Mono-Dispersed Droplet Cooling at Critical Heat Flux Regime, Seyed
Reza Mahmoudi (Department of Electrical and Computer Engineering, University of Western Ontario,
London, ON, Canada), Kaz Adamiak, Peter Castle (University of Western Ontario, London, ON, Canada)
AJTEC2011-44662
Effects of Surface Treatment on Frost Formation and Defrosting, Kim Kyoungmin, Kwan-Soo Lee
(Hanynag University, Sungdong-gu, Seoul, Korea (Republic))
AJTEC2011-44367
Crystal Orientation Rotation of Ice During Growth in a Bended Capillary, Yoshikazu Teraoka, Ryo Fukuno,
50
Koji Matsumoto (Chuo University, Tokyo, Japan)
AJTEC2011-44031
Numerical Model of Heat Transfer and Mass Transfer During the Solidification of a Concasting Steel,
Josef Stetina, Frantisek Kavicka (Brno University of Technology, Brno, Czech Republic)
Room: Waikiki 1
Session Organizer: Placidus B. Amama (UDRI/AFRL, Dayton, OH, United States)
Session Co-Organizer: Hiroyuki Kumano (Shinshu University, Nagano, Japan)
AJTEC2011-44099
Numerical Study of the Vertical Solidification Process, Sabrina Nouri (UDTS, Algiers, Algeria),
Mouhamed Benzeghiba (USTHB, Algiers, American Samoa), Ahmed Benzaoui (University of Sciences
and Technology, Algiers, Algeria)
AJTEC2011-44288
Numerical Simulation for Infrared-Assisted Freeze Drying of Solution Products, Chi Sung Song (Korea
Institute of Machinery and Materials, Daejeon, Korea (Republic)), Jin Hyun Nam (Daegu University,
Gyungsan, Korea (Republic)), Charn-Jung Kim (Seoul National University, Seoul, Korea (Republic))
AJTEC2011-44274
Estimation of Cooling Performance of PCM Module by Using CFD Analysis with Enthalpy Porosity
Method, Tomoyuki Hatakeyama, Masaru Ishizuka, Shinji Nakagawa, Sadakazu Takakuwa (Toyama
Prefectural University, Toyama, Japan)
AJTEC2011-44425
Phase Change Material and the Thermoelectric Effect for Solar Energy Harvesting and Storage, Qi Zhang,
Amen Agbossou (University of Savoie, Bourget du Lac, France), Zhihua Feng (University of Science and
Technology of China, Hefei, China), Anne-Cecile Grillet (University of Savoie, Bourget du Lac, France)
Room: Waikiki 1
Session Organizer: Placidus B. Amama (UDRI/AFRL, Dayton, OH, United States)
Session Co-Organizer: Tomoyuki Hatakeyama (Toyama Prefectural University, Toyama, Japan)
AJTEC2011-44162
Scale Analysis of Convective Melting with Internal Heat Generation, Ali Siahpush (INL, Idaho Falls, ID,
United States), John Crepeau (University of Idaho, Moscow, ID, United States)
AJTEC2011-44165
Experimental Verification of Expedited Freezing of Nanoparticle-Enhanced Phase Change Materials
(NEPCM), Liwu Fan, Jay M. Khodadadi (Auburn University, Auburn, AL, United States)
AJTEC2011-44133
Modified MgH2 and Ca(BH4)2 for High-Capacity Thermal Energy Storage, Placidus B. Amama
(UDRI/AFRL, Dayton, OH, United States), Jonathan E. Spowart (Air Force Research Laboratory,
WPAFB, OH, United States), Andrey Voevodin (AFRL/RXBT, Dayton, OH, United States), Timothy
Fisher (Air Force Research Laboratory, Materials and Manufacturing Directorate, WPAFB, OH, United
States)
Room: Waikiki 2
1-2-4 Computational Heat and Mass Transfer (Heat Exchangers) - 1
Session Organizer: Takuto Araki (Yokohama National University, Yokohama, Japan)
Session Co-Organizer: Laura Schaefer (University of Pittsburgh, Pittsburgh, PA, United States)
AJTEC2011-44494
A Numerical Investigation of Heat Transfer from Small Horizontal Cylinders at Near-Critical Pressures,
Gopinath Warrier (University of California, Los Angeles, Los Angeles, CA, United States), Yohann
51
Rousselet (INSA Lyon, Lyon, Villeurbanne Cedex, France), Vijay K. Dhir (University of California, Los
Angeles, Los Angeles, CA, United States)
AJTEC2011-44618
Unsteady Conjugate Heat Transfer Analysis of an Air Immersed Solid Particle with Application to an
Innovative Heat Exchanger, Leonardo Nettis, Fabio De Bellis, Luciano A. Catalano (Polytechnic
University of Bari, Bari, Italy), Roberto Verzicco (University of Rome Tor Vergata, Rome, Italy)
AJTEC2011-44443
Heat Transfer Characteristics of Baffled Channel Flow, Changwoo Kang, Kyung-Soo Yang (Inha
University, Incheon, Korea (Republic))
Room: Waikiki 2
1-2-11 Computational Heat and Mass Transfer (Heat Exchangers) - 2
Session Organizer: Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan)
AJTEC2011-44483
Three-Dimensional Simulations of the Flow Deflection in a Louvered Fin Heat Exchanger with Round
Tubes in a Staggered Arrangement, Henk Huisseune, Christophe T’Joen, Peter De Jaeger, Bernd Ameel,
Michel De Paepe (Ghent University, Gent, Belgium)
AJTEC2011-44285
Geometric Optimization of Multiple-Arrays of Micropin-Fins, Tunde Bello-Ochende, Josua P. Meyer,
Fervent U. Ighalo (University of Pretoria, Preotia, Gauteng, South Africa)
AJTEC2011-44629
A Parametric Study on Fluid Flow and Heat Transfer in a Printed Circuit Heat Exchanger, Sang-Moon Lee,
Kwang-Yong Kim (Inha University, Incheon, Korea (Republic))
Room: Waikiki 2
1-2-6 Computational Heat and Mass Transfer (High Temperature Issues)
Session Organizer: Naoya Fukushima (Tokyo Institute of Technology, Tokyo, Japan)
Session Co-Organizer: Laura Schaefer (University of Pittsburgh, Pittsburgh, PA, United States)
AJTEC2011-44223
Influence of Flame Front Instability on Flame Propagation Behavior, Kenji Mukaiyama, Kazunori
Kuwana (Yamagata University, Yonezawa, Yamagata, Japan)
AJTEC2011-44234
Numerical Simulations of Heat Fluxes for Atmospheric Re-Entries, Romain Savajano (Ecole
Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland), Daniel F. Potter (University of
Queensland, Brisbanne, Australia), Pénélope Leyland (EPFL Ecole Polytechnique Fédérale de Lausanne,
Lausanne, VD, Switzerland)
AJTEC2011-44417
Study on the Air Ingress Mitigation Methods in the Very High Temperature Gas Cooled Reactor (VHTR),
Chang Oh, Eung Soo Kim (Idaho National Laboratory, Idaho Falls, ID, United States)
AJTEC2011-44233
Thermal Radiative Fluid-Structure Coupling for Atmospheric Entries, Ojas Joshi, Pénélope Leyland
(EPFL Ecole Polytechnique Fédérale de Lausanne, Lausanne, VD, Switzerland)
Room: Waikiki 3
1-6-1 Biotransport Analysis 1
Session Organizer: Ryo Shirakashi (The University of Tokyo, Tokyo, Japan)
Session Co-Organizer: Kunal Mitra (Florida Tech, Melbourne, FL, United States)
AJTEC2011-44660
Three-Dimensional Numerical Study on Freezing Phase Change Heat Transfer in Biological Tissue
Embedded with Two Cryoprobes, Fang Zhao, Zhenqian Chen, Mingheng Shi (Southeast University,
52
Nanjing, Jiangsu, China)
AJTEC2011-44463
Numerical Study on Microwave Dehydro-Freezing of Fish Tissues, Yuichiro Oku, Hirofumi Tanigawa,
Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)
AJTEC2011-44214
Effect of Three-Dimensional Electric Field and Heat Conduction to Electrodes on the Temperature Rise
During Irreversible Electroporation, Seiji Nomura, Kosaku Kurata, Hiroshi Takamatsu (Kyushu
Room: Waikiki 3
1-6-2 Biotransport Analysis 2 and Medical Applications
Session Organizer: Hiroshi Takamatsu (Kyushu University, Fukuoka, Japan)
Session Co-Organizer: Bumsoo Han (Purdue University, West Lafayette, IN, United States)
AJTEC2011-44486
Time-Resolved Diffuse Optical Tomography of Human Forearm Under Exercise, Yasuomi Endo, Yukari
Tanikawa, Shinpei Okawa, Kazuto Masamoto (The University of Electro-Communications, Tokyo, Japan),
Yoko Hoshi (Tokyo Institute of Psychiatry Tokyo, Japan), Yukio Yamada (The University of
Electro-Communications, Tokyo, Japan), Michio Miyakawa (Niigata University, Niigata, Japan),
Hidetaka Okada (University of Electro-Communications, Tokyo, Japan), Tomohiro Kizuka (University of
Tsukuba, Ibaraki, Japan)
AJTEC2011-44480
Effect of the Arrangement of Optodes for 3D Diffuse Optical Tomography, Kazuhiro Uchida, Shinpei
Okawa, Kazuto Masamoto (University of Electro-Communications, Tokyo, Japan), Yoko Hoshi (Tokyo
Institute of Psychiatry, Tokyo, Japan), Yukio Yamada (The University of Electro-Communications, Tokyo,
Japan)
AJTEC2011-44404
Measurement of Cellular Adhesion Ratios under High Shear Flow on Various Substrates, Ryo Shirakashi,
Kiyoshi Takano, Christophe Provin, Yasuyuki Sakai, Teruo Fujii (The University of Tokyo, Tokyo, Japan)
AJTEC2011-44347
Transient Analysis of Microorganism Temperature and Evaporative Losses in an Algae Biofilm
Photobioreactor, Thomas Murphy, Halil Berberoglu (The University of Texas at Austin, Austin, TX,
United States)
Room: Waikiki 3
1-6-3 Optical Measurement of Biomaterials
Session Organizer: Ryo Shirakashi (The University of Tokyo, Tokyo, Japan)
Session Co-Organizer: Kunal Mitra (Florida Tech, Melbourne, FL, United States)
AJTEC2011-44475
Measurement of Optical Properties of Human Skin, Kazuhisa Hattori (The University of
Electro-Communications, Tokyo, Japan), Tomohiro Kuwahara (Shiseido Company Ltd., Chuou, Japan),
Masato Ohmi, Masamitsu Haruna (Osaka University, Osaka, Japan), Shinpei Okawa, Kazuto Masamoto,
Yukio Yamada (The University of Electro-Communications, Tokyo, Japan)
AJTEC2011-44471
Influence of Blood Glucose Level on the Scattering Coefficient of the Skin in Near-Infrared Spectroscopy,
Sachiko Kessoku (The University of Electro-Communications, Tokyo, Japan), Katsuhiko Maruo
(Panasonic Electric Works Co. Ltd., Kadoma, Japan), Shinpei Okawa, Kazuto Masamoto, Yukio Yamada
(The University of Electro-Communications, Tokyo, Japan)
AJTEC2011-44458
Measurement of Fluorescence Properties in Light Scattering Medium, Shouji Maruoka, Yohei Mitsui,
Shinpei Okawa (The University of Electro-Communications, Tokyo, Japan), Yoko Hoshi (Tokyo Institute
of Psychiatry, Tokyo, Japan), Yukio Yamada (The University of Electro-Communications, Tokyo, Japan)
53
AJTEC2011-44024
Tissue-Light Interaction During Monitoring of Thermal Lesion using Quantum Dot Mediated
Fluorescence Thermometry, Willard L. Hanson, Najma Abdollahzadeh (University of Texas at Arlington,
Arlington, TX, United States), Bumsoo Han (Purdue University, West Lafayette, IN, United States)
Room: Kona Moku B
2-6-1 Heat and Mass Transfer in Reaction Systems I
Session Organizer: Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)
Session Co-Organizer: Kalyan Annamalai (Texas A&M University, College Station, TX, United States)
AJTEC2011-44201
Design and Testing of a High Pressure and Temperature, Optically Accessible, Entrained Flow Coal
Gasifier, Indraneel Sircar, Rohan Gejji, Anup Sane, David Blunck, Scott Meyer, Jay P. Gore (Purdue
AJTEC2011-44073
Determination of Heat of Reaction in Supercritical Water, Yukihiko Matsumura, Go Tsujimoto, Takuro
Konishi (Hiroshima University, Higashi-Hiroshima, Japan)
AJTEC2011-44130
Modeling Compressive Reaction in Shock-Driven Secondary Granular Explosives, Aaron Brundage
(Sandia National Laboratories, Albuquerque, NM, United States)
AJTEC2011-44210
Oxygen Supply to Exothermic Combustion Reactions in Compost Heating System (CHS) by Permanent
Magnets, Harumi Toriyama, Yutaka Asako (Tokyo Metropolitan University, Tokyo, Japan)
Room: Kona Moku B
2-6-2 Heat and Mass Transfer in Reaction Systems II
Session Organizer: Kalyan Annamalai (Texas A&M University, College Station, TX, United States)
Session Co-Organizer: Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)
AJTEC2011-44072
Proposal and System Design of Chemical Dehumidification Process, Koichi Shirai (Hiroshima University,
Higashi-Hiroshima, Japan), Hiroyuki Kitahara (Total System Laboratory, Ibaraki, Japan), Yukihiko
Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)
AJTEC2011-44253
A Proposal of Waste Heat Recovery System Through Methanol Steam Reforming Integrated with
Absorption Heat Pump, Shunsuke Kawasaki, Willy Yanto Wijaya, Hirotatsu Watanabe, Ken Okazaki
(Tokyo Institute of Technology, Tokyo, Japan)
AJTEC2011-44664
Detailed Numerical Modeling of a Microchannel Reactor for Methane-Steam Reforming, Kevin Drost,
Benn J. Eilers, Daniel Peterson, Sourabh Apte, Vinod Narayanan, John Schmitt (Oregon State University,
Corvallis, OR, United States)
AJTEC2011-44390
Steam-Methane Reforming in a Microchannel under Constant and Variable Axial Surface Temperature
Profiles, Benn J. Eilers, Vinod Narayanan, Sourabh Apte, John Schmitt (Oregon State University,
Corvallis, OR, United States)
54
Room: Kona Moku C
2-2-7 Heat and Mass Transfer in Combustion Systems VII - Soot, Particles and Emissions Session Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)
Session Co-Organizer: Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan)
AJTEC2011-44413
Effects of Fuel Species on Soot Formation in Laminar Counterflow - Comparison Between Diesel Fuel
and Palm Methyl Ester as an Alternative Fuel -, Jun Hayashi (Osaka University, Suita, Osaka, Japan),
Nozomu Hashimoto, Hiroyuki Nishida (Central Research Institute of Electric Power Industry, Yokosuka,
Japan), Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)
AJTEC2011-44454
Soot and PAH Formation Characteristics in a Micro Flow Reactor with a Controlled Temperature Profile,
Ryu Tanimoto, Takuya Tezuka, Susumu Hasegawa, Hisashi Nakamura (Institute of Fluid Science, Tohoku
University, Sendai, Japan), Kaoru Maruta (Tohoku University, Sendai, Japan)
AJTEC2011-44615
Low-Emissions Renewable Power Generation using Liquid Biofuels, Leo D. Eskin, Michael S. Klassen,
Richard J. Roby, Richard G. Joklik, Maclain M. Holton (LPP Combustion, LLC, Columbia, MD, United
States)
AJTEC2011-44594
A Study of Fine Particle Spheroidization Process by Elevated-Pressure Pure Oxygen Flame, Shingo Suzuki,
Koji Sasaki, Noriaki Nakatsuka, Jun Hayashi (Osaka University, Suita, Osaka, Japan), Yoshiyuki
Hagiwara, Kimio Iino (Taiyo Nippon Sanso, Hokuto, Yamanashi, Japan), Fumiteru Akamatsu (Osaka
University, Suita, Osaka, Japan)
Room: Kona Moku C
2-2-8 Heat and Mass Transfer in Combustion Systems VIII - Measurements and Dynamics in Combustion
Systems Session Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)
Session Co-Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)
AJTEC2011-44025
Schmidt-Boelter Heat Flux Gage Sensitivity Coefficients in Radiative and Convective Environments,
James Nakos, Alex Brown (Sandia National Laboratories, Albuquerque, NM, United States)
AJTEC2011-44061
Aerodynamics of Long Aspect Ratio Fibrous Particles under Settling, Guo Qi, Gus Nathan, Richard Kelso
(The University of Adelaide, Adelaide, SA, Australia)
AJTEC2011-44326
Measuring Ignition Temperature and Heat Generation from Ethanol-Water-Oxygen Mixtures on Platinum,
Joshua Gibson, Judi Steciak, Ralph Budwig (University of Idaho - Boise, Boise, ID, United States), Steve
Beyerlein (University of Idaho - Moscow, Moscow, ID, United States)
Room: Milo III
2-4-9 Heat and Mass Transfer in Energy Devices IX - Thermal Cycles Session Organizer: Naoki Shikazono (The University of Tokyo, Tokyo, Japan)
AJTEC2011-44613
Thermo-Fluid Analysis of Prismatic Fuel Blocks using Multi-Dimensional Heat Conduction and
One-Dimensional Fluid Model, Nam-Il Tak, Min-Hwan Kim, Hong-Sik Lim (Korea Atomic Energy
Research Institute, Daejeon, Korea (Republic)), Goon-Cherl Park (Seoul National University, Seoul,
Korea (Republic))
AJTEC2011-44627
CFD Analysis on the Influence of Coolant Distribution Blocks on the Core Hot Spot Temperature in a
Prismatic Very High Temperature Reactor, Min-Hwan Kim, Nam-Il Tak, Jae Man Noh (Korea Atomic
55
Energy Research Institute, Daejeon, Korea (Republic)), Goon-Cherl Park (Seoul National University,
Seoul, Korea (Republic))
AJTEC2011-44052
Investigations on Performance of Stirling Engine Regenerator Matrix, Dadasaheb J. Shendage, Shireesh B.
Kedare, Shridhar L. Bapat (Indian Institute of Technology Bomaby, Mumbai, Maharashtra, India)
AJTEC2011-44503
A Generalized Ecological, Internally Irreversible Carnot Cycle, As an Optimum Compromise Between
Maximum Power and Efficiency for a Given Heat Transfer Inventory, Mohand Ait-Ali (Ecole Nationale
Polytechnique, El Harrach, Algiers, Algeria)
Room: Milo III
2-4-7 Heat and Mass Transfer in Energy Devices VII - Heat Transfer & Thermal Devices Session Organizer: Tetsuhiko Maeda (AIST, Tsukuba, Ibaraki, Japan)
AJTEC2011-44256
Snow-Melting System Around Steel Top of Underground Fire Cistern using Heat Pipe BACH, Niro Nagai,
Kensuke Suzuki (University of Fukui, Fukui, Japan), Yoshikazu Maegawa, Haruki Taniguchi (Hokukon
Co., Ltd., Fukui, Japan)
AJTEC2011-44144
Field Experiment on Top Heat Thermosyphone, Hiro Yoshida, Naoto Hagino, Erkata Yandri (Kanagawa
Institute of Technology, Atsugi, Kanagawa, Japan)
AJTEC2011-44043
A Numerical Algorithm and a Graphical Method to Size a Heat Exchanger, Torsten Berning (Aalborg
University, Aalborg, Denmark)
Room: Milo III
2-4-8 Heat and Mass Transfer in Energy Devices VIII - Heat & Mass Transfer in Energy Systems Session Organizer: Takuto Araki (Yokohama National University, Yokohama, Japan)
Session Co-Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)
AJTEC2011-44399
New Thermal Management Systems for Data Centers, Mayumi Ouchi, Yoshiyuki Abe (AIST, Tsukuba,
Ibaraki, Japan), Masato Fukagaya (SOHKi Co., Ltd., Nagoya, Japan), Takashi Kitagawa (Kawamura
Electric Inc., Seto, Japan), Haruhiko Ohta, Yasuhisa Shinmoto (Kyushu University, Fukuoka, Japan),
Masahide Sato, Ken-ichi Iimura (Utsunomiya University, Utsunomiya, Japan)
AJTEC2011-44095
Variable Pressure Humidification Dehumidification Desalination System, G. Prakash Narayan, Ronan K.
McGovern, John H. Lienhard V (Massachusetts Institute of Technology, Cambridge, MA, United States),
Syed M. Zubair (King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia)
AJTEC2011-44255
Numerical and Experimental Research in Heat Transfer to Screw Compressor Rotors, Nikola Stosic, Ian K
Smith, Ahmed Kovacevic (City University, London, SEMS, London, United Kingdom)
56
Room: Kona Moku A
3-2-8 Nanoscale Transport Phenomena during Thermal Conduction - 2
Session Co-Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan)
AJTEC2011-44012
Phonon Scattering in Bi2Te3/Sb2Te3 Superlattice, Yaguo Wang, Xianfan Xu (Purdue University, West
Lafayette, IN, United States), Rama Venkatasubramanian (RTI International, Research Triangle Park, NC,
United States)
AJTEC2011-44173
Thermal Conductivity of Carbon Nanotubes with Defects, Haibin Chen, Alan McGaughey (Carnegie
Mellon University, Pittsburgh, PA, United States)
AJTEC2011-44540
Thermal Transport in Few-Quintuple Bi2Te3 Thin Films and Nanoribbons, Bo Qiu, Xiulin Ruan (Purdue
Room: Kona Moku A
3-2-9 Transport Phenomena in Nanomaterial Synthesis - 1
Session Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan)
Session Co-Organizer: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)
AJTEC2011-44193
Possible Growth Region of Single-Walled Carbon Nanotube in CVD Synthsis on the CHO Components
Diagram, Shuhei Inoue, Takashi Tomie, Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima,
Japan), Masamichi Kohno (Kyushu University, Fukuoka, Japan)
AJTEC2011-44414
Carbon Nanotube Synthesis from Size Classified Metal Nano-Particles by a Differential Mobility
Analyzer, Masahiro Tomoda, Teppei Kawahara, Yohei Tasaki, Yasuyuki Takata (Kyushu University,
Fukuoka, Japan), Makoto Hirasawa (National Institute of Advanced Industrial Science and Technology,
Tsukuba, Japan), Takafumi Seto (Kanazawa University, Kanazawa, Japan), Masamichi Kohno (Kyushu
AJTEC2011-44257
Synthesis of Single-Walled Carbon Nanotube Containing Platinum Group Metal, Kyohei Ito, Shuhei Inoue,
Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)
Room: Kona Moku A
3-2-10 Transport Phenomena in Nanomaterial Synthesis - 2
Session Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Japan)
Session Co-Organizer: Xinwei Wang (Iowa State University, Ames, IA, United States)
AJTEC2011-44543
Effect of the Residence Time in High Temperature Reaction Field on the Fullerene and PAH Formation
Mechanism, Tatsuya Saika, Youhei Sakita, Masahiko Shibahara (Osaka University, Osaka, Japan)
AJTEC2011-44554
Fabrication of Thermoelectric La0.95Sr0.05CoO3 Thin Film and Seebeck Coefficient Measurement, Weihe
Xu, Qi Chen, Hamid Hadim, Yong Shi (Stevens Institute of Technology, Hoboken, NJ, United States)
AJTEC2011-44556
Size Control of Hollow Polylactic Acid Microcapsules and Hollow Polyelectrolyte Microcapsules in
Bubble Template Method, Jay J. Molino (The University of Tokyo, Chiba, Japan), Fumio Takemura
(National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan), Hirofumi
Daiguji (The University of Tokyo, Chiba, Japan)
57
Room: Milo IV&V
3-1-7 Bubbles and Liquid-Vapor Interfaces
Session Organizer: Manohar Sohal (Idaho National Laboratory, Idaho Falls, ID, United States)
Session Co-Organizer: Yuji Nagasaka (Keio University, Yokohama, Japan)
AJTEC2011-44397
MD-CFD Hybrid Simulation for Microbubble Dynamics, Ryo Nabika, Mitsuhiro Matsumoto (Kyoto
University, Kyoto, Japan)
AJTEC2011-44435
Initial Stage of Nucleate Boiling at Atomic Scale, Mitsuhiro Matsumoto, Takahiro Yamamoto (Kyoto
University, Kyoto, Japan)
AJTEC2011-44188
Molecular Dynamics Simulation of Vapor Bubble Nucleation in 2D Lennard-Jones Fluid Along
Nanometer-Sized Cavities, Joseph Johnston, III, R. Panneer Selvam (University of Arkansas, Fayetteville,
AR, United States)
Room: Milo IV&V
3-1-4 Wetting and Drying
Session Organizer: Gota Kikugawa (Tohoku University, Sendai, Japan)
Session Co-Organizer: Manohar Sohal (Idaho National Laboratory, Idaho Falls, ID, United States)
AJTEC2011-44168
Dryout Studies of Carbon Nanotube Bi-Porous Structure, Qingjun (Steve) Cai, Ya-chi Chen, Chung-Lung
Chen (Teledyne Scientific, Thousand Oaks, CA, United States)
AJTEC2011-44650
Fractal Aggregation Simulation in the Nanofluid Drying, Fei Duan, A. Crivoi (School of Mechanical and
Aerospace Engineering, Singapore, Singapore)
AJTEC2011-44358
Thermo-Wetting and Friction Reduction Characterization of Microtextured Superhydrophobic Surfaces,
Tae Jin Kim, Philip Glass, Carlos Hidrovo (The University of Texas at Austin, Austin, TX, United States)
Room: Milo IV&V
3-1-5 Measurement of Nanoscale Transport Phenomena
Session Organizer: Patrick Hopkins (Sandia National Labs, Albuquerque, NM, United States)
Session Co-Organizer: Yuji Nagasaka (Keio University, Yokohama, Japan)
AJTEC2011-44553
Thermal Conductivity Measurement of Vertically Aligned Single-Walled Carbon Nanotubes Utilizing
Temperature Dependence of Raman Scattering, Kei Ishikawa, Shohei Chiashi, Saifullah Badar, Theerapol
Thurakitseree, Takuma Hori, Rong Xiang, Makoto Watanabe, Jun-ichiro Shiomi, Shigeo Maruyama (The
University of Tokyo, Tokyo, Japan)
AJTEC2011-44110
A Modified 3-Omega Technique to Measure Thermal Conductivity in Liquids, Gases, and Powders, Scott
N. Schiffres, Jonathan A. Malen (Carnegie Mellon University, Pittsburgh, PA, United States)
AJTEC2011-44260
Identification of Nucleobases of Single Stranded DNA by Nanopore Force Resolution at Different Film
Thickness, Tatiana Zolotoukhina, Takeo Fukui (Toyama University, Toyama, Japan)
58
Closing Remarks
Room: Kona Moku
59
Committe Meetings
The following committee meetings are scheduled during the conference. All the meeting rooms are located on the
second floor of the Paoakalani Tower.
Sunday, March 13
Group
ASME 75th Anniversary of HTD
ASME Executive Committee Closed Session
ASME Executive Committee Open Session
Time
12:00 noon - 2:00 pm
1:00 - 3:30 pm
3:30 - 5:00 pm
Room
Milo I
Milo II
Milo II
Monday, March 14
Group
ASME K-6 Heat Transfer in Energy Systems
ASME K-8 Theory and Fundamental Research
ASME K-10 Heat Transfer Equipment
ASME K-11 Fire and Combustion
ASME K-12 Aerospace Heat Transfer
Time
5:00 - 7:00 pm
3:00 - 5:00 pm
3:00 - 5:00 pm
5:00 - 7:00 pm
5:00 - 7:00 pm
Room
Milo II
Milo I
Milo II
Milo Boardroom
Milo I
Tuesday, March 15
Group
ASME 2011 Summer Heat Transfer Conference Planning
ASME Journal of Heat Transfer
ASME K-3 Honors and Awards
ASME K-13 Heat Transfer in Multiphase Systems
ASME K-15 Transport Phenomena in Manufacturing and
Materials Processing
ASME K-20 Computational Heat Transfer
Time
3:00 - 5:00 pm
3:00 - 5:00 pm
5:00 - 7:00 pm
5:00 - 7:00 pm
3:00 - 5:00 pm
Room
Milo I
Milo II
Milo II
Milo I
Milo Boardroom
5:00 - 7:00 pm
Milo Boardroom
Wednesday, March 16
Group
2015 AJTEC Planning
ASME 2011 IMECE Planning
ASME K-2 Long Range Directions & Issues in Heat Transfer
ASME K-17 Heat and Mass Transfer in Biotechnology
ASME K-19 Environmental Heat Transfer
ASME K-21 Education
ASME K-22 Visualization of Heat Transfer
Time
3:00 - 5:00 pm
1:00 - 3:00 pm
1:00 - 3:00 pm
5:00 - 7:00 pm
3:00 - 5:00 pm
5:00 - 7:00 pm
5:00 - 7:00 pm
Room
Milo I
Milo I
Milo II
Milo II
Milo II
Milo Boardroom
Milo I
Thursday, March 17
Group
JSME TED Committee Meeting (closed)
ASME K-5 Coordinating Committee
Time
11:30 am - 1:30 pm
1:00 - 2:30 pm
60
Room
Milo II
Milo I

Final Program (pdf file)

Transcription

Similar documents

THE IEEE 18th INTERNATIONAL CONFERENCE ON

Technical Sessions - The American Society of Mechanical Engineers

URS 2015 Program - Office of Undergraduate Research

PDFWMA, Job 28

the ASM 2011 Final Program