Sizing Guide for KutGlove™ Cut Resistant Gloves

Comments

Transcription

Sizing Guide for KutGlove™ Cut Resistant Gloves
Sizing Guide for KutGlove™ Cut Resistant Gloves
NOTE: Drawing is to scale.
Hands come in all shapes and sizes. A one-size-fits-all
approach is simply ineffective. Correct fit is very important!
It not only reduces risk of injury, but also ensures a longer
product life cycle. Workers are also more likely to wear a
glove that fits properly and doesn’t slow them down.
NOTE: The majority of
foodservice workers
wear small or medium
sizes for proper fit
55
10
10
20
20
Gloves should
be cleaned
and sanitized
regularly.
(See washing
instructions.)
STEP ONE: With fingers together, place hand so that left side of
hand and bottom of palm rests on black line.
STEP TWO: Your glove size is determined by the color bar where
the right side of your hand rests. If the side of your hand falls
between bars, select smaller size.
• Glove should be snug, not tight.
• Fingers should reach completely to the end.
Tucker Safety Products KutGlove™ Cut Resistant Gloves are cut and puncture-resistant. NOT CUT AND PUNCTURE PROOF. Do NOT use with moving or serrated blades or tools.
This publication is for general information purposes only and is not a substitute for review of the applicable government regulations and standards or individual application or
use. It should not be construed as legal advice or opinion.
Copyright © 2013 Tucker Safety Products, Inc. All rights reserved. KutGlove™ is a trademark of Tucker Safety Products, Inc.
TSP3004 101513

Similar documents