Information about PowerWashTM Radiator and Condenser Activator

Comments

Transcription

Information about PowerWashTM Radiator and Condenser Activator
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND
OF THE COMPANY UNDERTAKING
Trade name:
External Radiator Service (PN-RCA-GF5)
Producer: Ever Dependup Co., Ltd.
NO.13, 24 RD., TAICHUNG INDUSTRIAL PARK, TAIWAN, R.O.C.
TEL: +886-4-23553368
FAX: +886-4-23553268
Emergency phone +886-928-178387
2. HAZARDS IDENTIFICATION
GHS
Sign:
Signal word: Warning
Hazard statement:
Harmful if swallowed
Harmful in contact with skin
Harmful if inhaled
Causes serious eye irritation
Prevention
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Wear protective gloves/clothing as specified by the manufacturer/supplier or the
competent authority.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Wear eye/face protection
Response
SWALLOWED:
Call a POISON CENTER or doctor/physician if you feel unwell.
Rinse mouth.
IF ON SKIN:
Wash with plenty of soap and water.
Call a POISON CENTER or doctor/physician if you feel unwell.
Wash contaminated clothing before reuse.
IF INHALED:
Remove to fresh air and keep at rest in a position comfortable for breathing.
Call a POISON CENTER or doctor/physician if you feel unwell.
IF IN EYES:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
If eye irritation persists, get medical advice/attention.
Wash hands after handling
Storage
Disposal
Passed to a licensed waste contractor.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance name
CAS No.
Anionic Surfactant
Trade secret
Amount
(%W/W )
10~20%
Tetramethylammoniumhexafluorophosphate
558-32-7
3~8%
Ammonium dihydrogenphosphate
7722-76-1
4~9%
Citric Acid
77-92-9
5~10%
Water
7732-18-5
50~75 %
4. FIRST AID MEASURES
Eye Contact: Immediately wash eyes with large amounts of water for at least 15 minutes
and contact physician as needed.
Skin Contact: Remove contaminated clothing and shoes and immediately wash skin
with large amounts of water.
Ingestion: Drink large amounts of water or milk. Contact physician. Induce vomiting.
5. FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Flash Point - Closed Cup: Pensky-Martens Closed Cup ASTM D 93 None.
Flash Point - Open Cup: Cleveland Open Cup ASTM D 92 None.
Autoignition Temperature: Not currently available.
Flammable Limits In Air:
Lower Not determined.
Upper Not determined.
5.2 EXTINGUISHING MEDIA
Non-flammable (aqueous solution).
5.3 EXTINGUISHING MEDIA TO AVOID
No information currently available.
5.4 SPECIAL FIRE FIGHTING PROCEDURES
No information currently available.
5.5 SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Use self-contained breathing apparatus and protective clothing.
5.6 UNUSUAL FIRE AND EXPLOSION HAZARDS
No information currently available.
5.7 HAZARDOUS COMBUSTION PRODUCTS
No information currently available.
6. ACCIDENTAL RELEASFMEASURES
Personal Protection
Respiratory: This product is suggested to be used under a well ventilate space.
Eye: Approved safety glasses with side shield.
Additional Comments: Avoid eye and skin contact. Rinse with massive amounts of water
if contacted. Eye washes and safety showers should be available.
Educate and train employees in the use of this product, besides also follow all label
instructions.
Methods for cleaning up
Contain spill with inert material. Absorb in vermiculite, dry sand or earth. Place in the
container for disposal according to local regulation.
Environmental Precaution
For any remain on the ground after cleaning up, flush with massive amounts of water on
the ground. Run-off waste water is allowed to enter drain or watercourses.
7. HANDLING AND STORAGE
Handling
Mechanical ventilation or local exhaust ventilation is required. Avoid all unnecessary.
Storage Conditions
Keep contains tightly closed. Keep away from heat.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Limit Comments
No exposure limits have been established
Engineering controls
Mechanical ventilation or local exhaust ventilation is required.
Hand
Use protective gloves made of Butyl rubber. Wear tightly fitting safety goggles and
full-face visor or shield.
Skin and body
Use suitable protective clothing as protection against splashing or contamination.
Launder cloths before re-use.
9. PHYSICALAND CHEMICAL PROPERTIES
Appearance
Light yellow clear liquid
Odor
No special odor.
pH
5.0 ±0.5 (Use plastic pH electrodes of pH meter. If glass electrode used, DO NOT
determined on this chemical over 10 seconds. The elements of glass is sand (SiO2), the
glass electrode will melt in this chemical, cause the bore diameter of glass membrane of
electrode changed.)
Specific Gravity (H2O is: 1): 1.1315+-0.01
Equivalent content of surfactant:
(>)20%
Reactivity Data:
Hazardous Polymerization: Will not occur.
Incompatibility: None Known to cause dangerous condition.
Reacts to the metallic oxide, calcium carbonate, magnesium carbonate, silica quickly and
generates lots of foam. Slight reaction with aluminum, copper, and their alloy.
10. STABILITY AND REACTIVITY
Thermal decomposition
No thermal decomposition when stored and handled correctly.
11. TOXICOLOGICAL INFORMATION
Irritation
No clinical signs and systemic toxic effects were observed in all rabbits. The individual
body weight change of each rabbit was within the acceptable range. Based on the results
of skin reaction, the primary irritation index (PII) was calculated as 2.96 for test site and
0 for control site. Therefore, PII for the test article was 2.96.
Classification System for Dermal Irritation
Primary Irritation Index (PII)
=0.0
>0.0 —
>0.5 —
>2.0 —
>5.0 —
0.5
2.0
5.0
8.0
12. ECOLOGICAL INFORMATION
Irritation Category
nonirritant
negligible irritant
mild irritant
moderate irritant
severe irritant
Environmental Fate:
When released into the soil, this material is not expected to evaporate significantly. When
released into the soil, this material may leach into groundwater. When released into the
soil, this material may biodegrade to a moderate extent. When released into water, this
material is not expected to evaporate significantly. When released into water, this
material may biodegrade to a moderate extent. This material has an estimated
bioconcentration factor (BCF) of less than 100. This material is not expected to
significantly bioaccumulate. When released into the air, this material is expected to be
readily degraded by reaction with photochemically produced hydroxyl radicals. When
released into the air, this material is expected to have a half-life of less than 1 day.
Treatment
The product is substantially removes biological treatment process.
13. DISPOSAL CONSIDERATIONS
Disposal methods
Dispose in safe map in accordance with local/national regulations. Completely empty
contents of drums before discarding.
Waste category
Disposal of in accordance with local authority requirements.
14. TRANSPORT INFORMATION
Transportation regulation varies by local.
UN CLASS / UN NUMBER : Not applicable
SPECIAL PRECAUTIONS FOR USER: -
15. REGULATION INFORMATION
Risk phrase
May cause sensitivity by skin contact harmful to aquatic organisms.
Safety phrases
In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice. Wear suitable protective clothing, gloves and eye/face protection. In case of
contact of accident or if you felt unwell seek medical advice immediately.(show the label
where possible) Avoid release to the environment Refer to special instructions/Safety
Data Sheets
16. OTHER INFORMATION
The information only concerns the above mentioned product as supplied and may not be
valid if used with other products or in any process. It remains the user’s own
responsibility to make sure that the information is appreciated and complete for the
special use of this product.

Similar documents