FF Side Mount..
Transcription
FF Side Mount..
Side Mounting Float Switch www.fine-tek.com INTRODUCTION WORKING PRINCIPLE FEATURES The reed switch relies on two basic scientific principles namely: buoyancy and magnetism. Buoyancy causes the float (which contains a magnet) to rise with the liquid and magnetism helps open and close the switch. A change in liquid levels raises or lowers the float up or down. The end of the pivot arm (non float side) contains a permanent magnet that can repel the switch magnet (inside the stationary ‘stem’ of the entire structure). The side mounted float level sensor (FF series) are manufactured specifically for horizontal mounting on tanks or vessels. They work well as high or low level controls. 1. Both Micro-Switch types and Reed Switches are available. The MicroSwitch type is usable even at ambient temperatures of 100° C maximum. 2. Mounting flanges are custom-made. (JIS, DIN,ANSI). 3. A wide variety of floats for different solution’s specificgravities (S.G.) are available. 4. Wetted parts material ranges from plastics, stainless steel, anti-corrosive and explosion proof types. When the float magnet moves close to the switch’s stationary stem, the float magnet repel the switch magnet which either opens or closes the Electrical circuit. 40mm 22B 40mm WIRING COM NO REED SWITCH ---- 1A, 30W 220Vac/200Vdc (FF20, 45, 55, 89 ) NC MICRO SWITCH ---- 5A/250Vac 1 CONFIGURATION DIAGRAMS 3 11 7 4 2 1 5 6 4 2 1 12 5 7 10 8 8 10 9 9 Fig.(1) Reed switch type Fig.(2) Micro switch type 1. Float 4. Pivot 7. Terminal 10. Magnet 2. Shaft 5. Housing 8. O-ring 11. Screw 3. Flange 6. Reed Switch 9. Conduit 12. Microswitch Conduit/Connection Nozzle Tank's wall The diameter and length of the connecting pipe (of a tank) are in direct proportion. flange UNIT: mm Pipe dia. 45-50 (A) Length (B) (Max.) 130 50-55 55-60 60-65 65-70 A 140 150 160 170 B 2 SPECIFICATIONS TYPE APPROVAL PROGRAM Operating Temp. Electrical Contact Contact Capacity Contact Element Housing Spec. Applicable S.G. FF10BHM -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.25 FF10CEM -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.65 FF10CEQ -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.65 FF10CLO -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.65 FF10DFM -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.55 FF10DFQ -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.55 FF15HEQ -20LC~100LC SPDT(1C) 5A/250Vac Microswitch SUS304 IP65 0.8 FF12CEM -40LC~100LC SPDT(1C)X2 5A/250Vac Microswitch Aluminum Alloy IP65 0.65 FF20BHM -40LC~200LC SPDT(1C) 1A, 60W 220Vac/200Vdc Reed Switch Aluminum Alloy IP65 0.25 FF20CEM -40LC~200LC SPDT(1C) 1A, 60W 220Vac/200Vdc Reed Switch Aluminum Alloy IP65 0.65 FF20CEQ -40LC~200LC SPDT(1C) 1A, 60W 220Vac/200Vdc Reed Switch Aluminum Alloy IP65 0.65 FF20DFM -40LC~200LC SPDT(1C) 1A, 60W 220Vac/200Vdc Reed Switch Aluminum Alloy IP65 0.55 FF20DFQ -40LC~200LC SPDT(1C) 1A, 60W 220Vac/200Vdc Reed Switch Aluminum Alloy IP65 0.55 FF20DLO -40LC~200LC SPDT(1C) 1A, 60W 220Vac/200Vdc Reed Switch Aluminum Alloy IP65 0.55 SPEC. MODEL ※ Above-mentioned models are approved by class societes : DNV 、 LR 、 GL 、 BV 、 ABS 。 3 SPECIFICATIONS TYPE APPROVAL PROGRAM MODEL Operating Temp. Electrical Contact Contact Capacity Contact Element Housing Spec. Applicable S.G. FF40DFM -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.55 FF45DFM -40LC~200LC SPDT(1C) 1A, 60W Reed Switch Aluminum Alloy 220Vac/200Vdc IP65 0.55 FF50DFM -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.55 FF55DFM -40LC~200LC SPDT(1C) 1A, 60W 220Vac/200Vdc Reed switch Aluminum Alloy IP65 0.55 FF70/71BHM -20LC~100LC SPDT(1C) 3A/250Vac Microswitch SUS316 Ex d IIC T3~T6 0.25 FF70/71CFM -20LC~100LC SPDT(1C) 3A/250Vac Microswitch SUS316 Ex d IIC T3~T6 0.65 FF70/71DFM -20LC~100LC SPDT(1C) 3A/250Vac Microswitch SUS316 Ex d IIC T3~T6 0.55 FF73GLO -20LC~100LC SPDT(1C) 3A/250Vac Microswitch SUS316 Ex d IIC T3~T6 0.7 FF75DFM -20LC~100LC SPDT(1C) 3A/250Vac Microswitch SUS316 Ex d IIC T3~T6 0.55 FF90CLO -20LC~100LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.65 SPEC. ※ Above-mentioned models are approved by class societes : DNV 、 LR 、 GL 、 BV 、 ABS 。 Contact Capacity Contact Element Housing Spec. Applicable S.G. SPST(1A) 1A, 50W 240Vac/200Vdc Reed Switch SUS304 IP65 0.65 -40LC~350LC SPDT(1C) 5A/250Vac Microswitch Aluminum Alloy IP65 0.55 FF80EFM -20LC~80LC SPDT(1C) 1A, 30W 220Vac/200Vdc Reed switch PC IP65 0.60 FF81E -20LC~80LC SPDT(1C) 1A, 30W 220Vac/200Vdc Reed switch MODEL Operating Temp. Electrical Contact FF30A3Q -20LC~100LC FF62DFM SPEC. 4 0.60 MODELS Order No. F F99 9 99 Connecting (Refer to p11) Float 10: Single Switch 12: Dual Switch Order No. FF10BHM Flange 3"x5kg/cm2 Order No. FF10CEM 70 f145 4- f19 2 1-1/2"x5kg/cm 70 f95 4- f15 f75 f70 f180 50 f120 f41 f70 52 120 150 1/2"PF 225 (Max. 800) L=255 (Max.600) 14 Order No. FF10CLO 1/2"PF 12 92x92 Order No. FF10CEQ 70 f92 4- f14 80 f41 992 52 f70 f41 150 f70 1-1/2"PT 150 255(Max.600) 1/2"PF 12 Order No. FF10DFM 1/2"PF Order No. FF10DFQ 2 2"x5kg/cm f105 4- f15 70 80 f130 f50 40 L=245 (Max.600) f70 50 f50 f70 150 2"PT 150 L=253 (Max.700) L=245 (Max.690) 1/2"PF 14 40 1/2"PF Order No. FF12CEM Order No. FF15HEQ Flange 1-1/2"x5kg/cm2 HEX54 1-1/2"PT 70 f95 4- f15 f41 f70 f120 f41 100 52 42 155 10 150 M20 255 (Max.600) 12 5 1/2"PF f70 HIGH TEMPERATURE Order No. FF20 9 99 Connection (Refer to p11) Float Order No. FF20BHM Flange 3"x5kg/cm2 Order No. FF20CEM 110 Flange 1-1/2"x5kg/cm2 f95 4- f15 f145 4- f19 PTFE f75 50 f180 f70 f41 120 52 110 PTFE f120 f70 150 1/2"PF L=225 (Max.800) L=255 (Max.600) Order No. FF20CEQ Order No. FF20DFM 110 f41 f70 1-1/2"PT Flange 2"x5kg/cm2 110 f105 4- f15 PTFE 150 1/2"PF 12 14 f130 f50 40 PTFE f70 50 150 L=245 (Max.600) L=253 (Max.700) 1/2"PF 14 Order No. FF20DLO Order No. FF20DFQ Flange 92x92(Square) 110 110 f92 4- f14 f50 PTFE 992 52 PTFE f50 f70 f70 150 150 L=255 (Max.700) L=245 (Max.700) 12 1/2"PF Order No. FF62DFM 2"x5kg/cm2 PTFE f105 80 f130 f70 f50 4- f15 1/2"PF 50 150 253 (Max.700) 14 75 1/2"PF 6 2"PT 30 1/2"PF Order No. F F99 9 99 Connecting (Refer to page 11) Float 30: Mini Type 40: Double Angle Standard 45: Double Angle High Temperature 50: Vertical Standard 55: Vertical High Temperature Order No. FF50DFM Order No. FF40DFM f70 2 2"x5kg/cm f105 4- f15 X³40mm Y³40mm Z³40mm X+Y+Z£ 500mm 1/2"PF 70 70 14 f130 Z f130 Y f70 50 2"x5kg/cm2 14 X³40mm Y³40mm X+Y£ 1000mm 50 f105 f50 4- f15 X 150 1/2"PF Y f50 X 150 Order No. FF45DFM Order No. FF55DFM f70 2"x5kg/cm2 f105 4- f15 X³40mm Y³40mm Z³40mm X+Y+Z£ 500mm 1/2"PF 110 PTFE 110 f130 Y f50 f70 50 2 50 2"x5kg/cm X 150 Y f50 X 150 Order No. FF30A3Q 1-1/4"PT f6 68±2 f32.5 Lead wire 50cm 20 25 12 155±2 7 f105 4- f15 X³40mm Y³40mm X+Y£ 1000mm 1/2"PF 14 HEX 46 PTFE 14 f130 Z ANTI-CORROSIVE MODELS FF80EFM --- PC Housing FF81E --- Without Housing Wetted parts : P.P. 2 Cable spec. : PVC 3x0.75 mm Order No. FF80EFM Flange 2"x5kg/cm2 50 f44 177 14 Order No. FF81E M20 50 connection cable 3M f44 177 48 8 SQUARE FLANGE & TEST ACCESORIES Order No. FF90CLO Flange 92x92(Square) 70 PCD 92 4- f14 f41 992 f70 150 255 12 1/2"PF 1. Housing material: Aluminum (IP65) 2. Suitable S.G.: >0.65 3. Operation temp.: -20~100BC 4. Contact mode: SPDT(1C) 5. Contact rating: 5A/250Vac Drill Hole 92 65 PCD 92 4- f14 Test Board (Optional) Material: SS41 Please weld test board with level instrument. Without level dropping, level instrument can be checked regularly if functions well. Check list Check if mechanical parts of level switch function well? Check if float functions well? 4-f14 PCD 92 Square flange 15.5 70 Welding 9 92 65 f45~60 6. Operation pressure: 15kg/cm2 7. Wetted parts: SUS304 8. Weight: (approx.) 1.2 kg IMPORTANCE FOR INSTALLATION 1. SUS304/SUS316 materials are not available for corrosive application. 4. Check the liquid’s S.G. level before installation. 2. The cable duct(s) must face downward to prevent moisture seeping in. 5. The mounting hole must be larger than the external diameter of the float. (Please refer to p2) 3. The float and extension rod must be inserted into the bin completely. 6. Don't mount the devices near the bin's inlet or outlet. Typical Positioning FF55DFM FF50DFM FF45DFM FF10CLO FF20DEQ FF20DFM FF10CEQ FF79 10 ORDER INFORMATION Order No. FF !! 1 0 ! C !! E M (! S ) (! T )- 6 55: Vertical High Temp. 62/66: High Temp Radiator 80: Anti-acid/alkaline 81: Without Housing Only FF81E 90/96: Square Flange 10/12: Standard 15: Mini 20/26: High Temp. 40: Double Angle Standard 45: Double Angle High Temp. 50: Vertical Standard ※ Mini type only available float type(C.G.H) FLOAT TYPE B: f75x120 (Operation Pressure 10kg/cm2 C: f41x150 (Operation Pressure 15kg/cm2 2 D: f50x150 (Operation Pressure 30kg/cm 2 G: f41x125 (Operation Pressure 15kg/cm H: f41x100 (Operation Pressure 15kg/cm2 B S.G. 0.25) S.G. 0.65) S.G. 0.55) S.G. 0.7) S.G. 0.8) D C f75 f50 f41 120 150 150 G H f41 f41 125 100 CONNECTING TYPE E : 1-1/2" F : 2" G: 2-1/2" H : 3" I : 4" J : 5" K : 6" L : 92x92 (40A) (50A) (65A) (80A) (100A) (125A) (150A) M: 5 kg/cm2 N : 10 kg/cm2 O : 150 Lbs P : 300 Lbs Q : PT R : PF(G) T : BSP U : NPT W: PN 10 (10Bar) X : PN 16 (16Bar) Y : PN 25 (25Bar) Z : PN 40 (40Bar) S : Others CUSTOM LENGTH(L) (UNIT: mm) TEST BOARD MATERIAL Without:SUS304 -6:SUS316 -9:SUS316L ※ Total product length margin of error is K5mm ※ Characteristics, specifications and dimensions are subject to change without notice. ※ Please contact your nearest distributor for further information. 11 NEPSI PROOF No.GYJ111213 Ex d IIC T3~T6 PTB PROOF No. 05 ATEX 1025 II 2G Ex d IIB T6~T4 Gb II 2D Ex tb IIIC T85BC~T135BC Db IP65 EXPLOSION PROOF Order No. F F99 9 99 Connecting Type (Refer to page 13) Float Type 79: Explosion Proof ( EX d IIC T3~T6) Order No. FF 70 CEQ Order No. FF 70 DFQ 80 80 f41 1-1/2"PT 150 f70 f50 f70 245 (Max.600) 40 245 (Max.690) 1/2"NPT Order No. FF 71 BHM 2"PT 150 40 Flange 3"x5kg/cm2 1/2"NPT Order No. FF 71 CEM f145 Flange 1-1/2"x5kg/cm2 4- f19 f95 80 4- f15 80 f75 f70 f180 50 f120 f41 f70 52 120 150 1/2"NPT 225 (Max. 800) 255 (Max.600) 14 Order No. FF 73 CLO Order No. FF 71 DFM Flange 2"x5kg/cm2 f105 4- f15 Flange 92x92(Square) 80 PCD 92 4- f14 80 f130 f50 1/2"NPT 12 f41 f70 f70 992 50 150 150 255 248 (Max.700) 12 1/2"NPT 1/2"NPT 14 Order No. FF 74 DFM Order No. FF 75 DFM f70 1/2"NPT 2 2"x5kg/cm 80 80 f105 4- f15 X+Y+Z£ 500mm X, Y, Z³40mm Flange 2"x5kg/cm2 Z f130 Y f70 50 50 f105 4-f15 X³40mm Y³40mm X+Y£ 1000mm f50 X 150 14 f130 Y 1/2"NPT 14 f50 X 150 12 ORDER INFORMATION NEPSI PROOF No.GYJ111213 Ex d IIC T3~T6 PTB PROOF No. 05 ATEX 1025 II 2G Ex d IIB T6~T4 Gb II 2D Ex tb IIIC T85BC~T135BC Db IP65 Order No. FF !! T-6 7 0 ! C !! EM ! S ! ORDER NO. 70: LF70 Explosion Proof 71: LF71 Explosion Proof 73: LF73 Explosion Proof 74: LF74 Explosion Proof 75: LF75 Explosion Proof FLOAT TYPE B: f75x120 (Operation Pressure 10kg/cm2 C: f41x150 (Operation Pressure 15kg/cm2 D: f50x150 (Operation Pressure 30kg/cm2 G: f41x125 (Operation Pressure 15kg/cm2 H: f41x100 (Operation Pressure 15kg/cm2 B S.G. 0.25) S.G. 0.65) S.G. 0.55) S.G. 0.7) S.G. 0.8) D C f75 f50 f41 120 150 150 G H f41 f41 125 100 CONNECTING TYPE E: 1-1/2" (40A) F : 2" (50A) G: 2-1/2" (65A) H: 3" (80A) I : 4" (100A) J : 5" (125A) K: 6" (150A) L : 92x92 M: 5 kg/cm2 N: 10 kg/cm2 O: 150 Lbs P : 300 Lbs Q: PT R: PF(G) T : BSP U : NPT W: PN10 (10Bar) X : PN16 (16Bar) Y : PN25 (25Bar) Z : PN40 (40Bar) S : Others CUSTOM LENGTH(L) (UNIT: mm) TEST ACCESORY MATERIAL Without:SUS304 -6:SUS316 -9:SUS316L ※ Total product length margin of error is K5mm ※ Characteristics, specifications and dimensions are subject to change without notice. ※ Please contact your nearest distributor for further information. . 13 Global Network Germany China U.S. Taiwan U.S. Singapore Asia North America Europe Taiwan California, U.S. Germany FINETEK CO., LTD. - Taipei Head Quarter No.16, Tzuchiang St., Tucheng Industrial Park New Taipei City 236, Taiwan TEL: 886-2-2269-6789 FAX: 886-2-2268-6682 EMAIL: [email protected] APLUS FINETEK SENSOR INC. - US Office 355 S. Lemon Ave, Suite D, Walnut, CA 91789 TEL: 1 909 598 2488 FAX: 1 909 598 3188 EMAIL: [email protected] FineTeK GmbH - Germany Office Frankfurter Str. 62, OG D-65428 Ruesselsheim, Germany TEL: +49-(0)6142-17608-0 FAX: +49-(0)6142-17608-20 EMAIL: [email protected] FINETEK CO., LTD. - I-Lan Factory TEL: 886-3-990-9669 FAX: 886-3-9909659 Illinois, U.S. FINETEK CO., LTD. - Taichung Brance TEL: 886-4-2337-0825 FAX: 886-4-2337-0836 APLUS FINETEK SENSOR INC. TEL: 1 815 632-3132 FAX: 1 815 716 8464 EMAIL: [email protected] FINETEK CO., LTD. - Kaohsiung Branch TEL: 886-7-333-6968 FAX: 886-7-536-8758 China FINE AUTOMATION CO., LTD. - Shanghai Factory No.451 DuHui Rd, MinHang District, Shanghai, China 201109 TEL: 86-21-6490-7260 FAX: 86-21-6490-7276 EMAIL: [email protected] Distributor: Singapore FINETEK PTE LTD. - Singapore Office No. 60 Kaki Bukit Place, #07-06 Eunos Techpark 2 Lobby B, Singapore 415979 TEL: 65-6452-6340 FAX: 65-6734-1878 EMAIL: [email protected] 08-FF-B0-EP, 12/27/2013