2015-2016 COLORADO/ CANYON 2WD/4WD
Transcription
2015-2016 COLORADO/ CANYON 2WD/4WD
CHEVROLET/GMC 2015-2016 COLORADO/ CANYON 2WD/4WD 5.5” SUSPENSION SYSTEM WORKS WITH DIESEL 5.5” Front Spacer / 3" Rear Block Kit # C39 $1,299.95 or Kit # C39N $1,313.59 1 1 1 1 1 1 2 C2550 C2551 C2552 C2553 C2554 C2409 4757 Box Kit 1 of 4 Box Kit 2 of 4 Box Kit 3 of 4 Box Kit 4 of 4 Strut Extension Box Kit Rear 4” Block Kit Rear Shock (2) 7757 Rear Nitro Shock This new suspension system for the redesigned Colorado has passed the FMVSS126 test for stability control compliance. To probably lift the new Colorado/Canyon suspension 5.5”, we started with new ductile cast iron steering knuckles. The new knuckles position the critical steering and control arm mounting location and work in harmony with the heavy-duty fabricated crossmembers. Along with new crossmembers, the provided differential drop brackets lower and reposition the front differential for correct CV shaft angles and still allow for use of the factory front driveshaft. QUICK SPECS oscillating feedback in the steering wheel maybe experienced 1.5" BODY LIFT 2.75” COMBO KIT Kit# C9157 $165.95 Kit# C1257 $205.95 Our 2.75” Combo kit includes our 1.25” front leveling kit (C1121) and 1.5” body lift (C9157) for a complete lifted/leveled look and room for 285/70R17 tires on the stock wheels (5.75” BS). This kit is complete, including all the parts necessary for the leveling kit and body lift install, as well as step by step, detailed installations instructions. All while maintaining the factory ride quality and handling. Give your new Colorado/Canyon the tough look it should have from the factory, with a very small investment of time and your hard earned money! n Complete 1.5” body lift kit n Includes front and rear bumper relocation brackets n Grade 10.9 body and bed mounting bolts n Quicker and easier install than larger body lifts n Maintains factory ride n No effect on towing ability n Limited Lifetime Warranty QUICK SPECS QUICK SPECS Installation Skill Level: 2 of 5 Estimated install time: 3-5 hr Max tire size: 285/70R17 Wheel size: 17 w/ 5.75” Backspacing Installation Skill Level: 2 of 5 Estimated install time: 3-5 hr Max tire size: 265/70R17 Wheel size: 17 w/ 5.75” Backspacing NOTES (C1257) 1. No strut disassembly required 1.25” LEVELING KIT ZONEOFFROAD.COM Kit# C1121 $49.95 14 NOTES (C39) 1. Inner fender trimming Installation Skill Level: 4 of 5 2. Minor welding required for steering stops when Estimated install time: 8 hr combined with certain tire/wheel combinations Max Tire Size: 295/70R17 see installation instructions 3. The factory Electric Power Assisted Steering (EPAS) 305/55R20 is sensitive to out-of-round, out-of-balance, overly Wheel Size: 17x8 w/ 4.5” Backspacing aggressive tires. Depending on the situation, some 20x9 w/ 5.25” Backspacing n Laser Cut Steel n E-Coated For Corrosion Protection n Completely Bolt-On - No strut disassebly required n Retains factory ride quality n Limited Lifetime Warranty QUICK SPECS Installation Skill Level: 2 of 5 Estimated install time: 2 hr Max tire size: 265/65R17 Wheel size: 17 w/ 5.75” Backspacing NOTES (C1121) 1. No strut disassembly required 2. 265/65R17 Tire on factory 17x8 wheel w/5.75” backspacing - this includes any equivalent spec’d larger diameter (18”, 20”, etc) wheel/tire combo. 2.75” Combo Lift - 285/70r17 Hankook A/Ts - 17x9 Raceline Mambas 3.5” COMBO KIT Kit# C1355 $349.95 C1355 QUICK SPECS 3.5” OPTIONAL ACCESSORIES C9906 C9907 4607 7607 08-12 Rear Bumper Lift Kit 04-07 Rear Bumper Lift Kit Rear Shock (2 Req'd) Rear Nitro Shock (2 Req'd) Zone Offroad has developed a comprehensive 3.5” lift kit that combines the Zone 1.5” body lift and Zone 2” front and rear lift kit. The benefit? A package priced kit that is nearly the height of a 4” suspension system and below the cost of a 3” body lift. Not only does it avoid the frame to body gap caused by taller body lifts, but it has the capability to clear 32’s or even 33” tires with trimming that is outlined in the instructions. For more specific details on the body lift and leveling kit or the included components in each refer to the specific kit listing in this section. $39.95 $53.95 $34.68 $41.50 NOTES (C1355) 1. For automatic transmission models only. 2. Works with 2/4wd, all cab configurations. 3. Trimming of front bumper plastic valance or frame required for front bumper relocation. 4. Bumper hitch not for towing after lifting rear bumper, factory/aftermarket receivers are not affected by lift. 5. Welding optional and required only if front factory tow hooks are retained. 6. Radiator and condenser brackets not designed for V8 models. Installation Skill Level: 3 of 5 Estimated install time: 4-5 hr Max tire size: 32x11.50x15 Wheel size: 16x8 w/ 5” Backspacing 2" LEVELING KIT Kit# C1214 $99.95 n 100% resonant frequency tested to ensure a solid casting n Made in the USA n Easy installation n Includes front shock spacers n Levels out your truck n Optional custom valved rear shocks available in the accessories CHEVROLET/GMC 2004-2012 COLORADO/ CANYON 4WD C1214 QUICK SPECS Installation Skill Level: 1 of 5 Estimated install time: 2 hr Max tire size: 31x10.50R15 Wheel size: Stock Backspacing: Stock OPTIONAL ACCESSORIES C1224 4607 7607 QUICK SPECS $34.68 $41.50 2" LIFT KIT Installation Skill Level: 1 of 5 Estimated install time: 2-3 hr Max tire size: 31x10.50R15 Wheel size: Stock Backspacing: Stock Kit# C1224 $149.95 OPTIONAL ACCESSORIES 4607 Rear Shock (2 req'd) 7607 Rear Nitro Shock (2 req'd) Rear Shock (2 req'd) Rear Nitro Shock (2 req'd) $34.68 $41.50 n 100% resonant frequency tested to ensure a solid casting n Made in the U.S.A n Easy installation n Includes front shock spacers n Add-a-leaf will lift the rear while reducing unwanted spring wrap, unlike a block system n Optional custom valved rear shocks available in the accessories Kit# C9155 $239.95 n Includes class 10.9 hardware n Fully integrated radiator relocation mounts n Front bumper 1.5” spacers and detailed trimming instructions n Tow hook relocation and reinforcement included QUICK SPECS Installation Skill Level: 3 of 5 Estimated install time: 4 hrs OPTIONAL ACCESSORIES C9906 C9907 2008-12 Rear bumper bracket kit 2004-07 Rear bumper bracket kit $39.95 $53.95 NOTES (C9155) 1. For automatic transmission models only 2. Works with 2/4wd, all cab configurations 3. Trimming of front bumper plastic valance or frame required for front bumper relocation 4. Bumper hitch not for towing after lifting rear bumper, factory/aftermarket receivers are not affected by lift 5. Welding optional and required only if front factory tow hooks are retained. 6. Radiator & condenser brackets not designed for V8 models. 888-998-ZONE 1.5” BODY LIFT 15 CHEVROLET/GMC 2014-2016 1500 PICKUP 4WD The Zone 4.5” and 6.5” systems include a pair of fully boxed heavy duty crossmembers and stout ductile iron steering knuckles engineered to work with the redesigned steering. A 3-piece differential relocation system is utilized to correct front pinion angle with the center differential brace tying front and rear crossmembers together for a sturdy differential mount. This coupled with the differential skid plate and crossmember brace create an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are a pair of CV spacers, brake line brackets, sway bar relocation, and all the necessary hardware to complete the install. 6.5” SUSPENSION SYSTEM 6.5” IFS Knuckle / 5” Rear Block Kit # C25 Cast Steel Control Arms Kit # C26 Aluminum/Stamped Steel Control Arms $1,195.95 or (1) (1) 1 1 2 C2650 C2652 C2651 C2656 4759 Kit # C25N w/ Nitro Shocks (2) 7759 Kit # C26N w/ Nitro Shocks $1,209.59 Box Kit 1 of 3 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Shock Rear Nitro Shock 6.5” KIT QUICK SPECS Skill Level: 4 of 5 Estimated install time: 8 hrs Max tire size: 35 x 12.50 Wheel size: 17 x 9 w/ 5” Backspacing 18 x 9 w/ 5”-5.25” Backspacing 20 x 9 w/ 5.75” Backspacing 6.5” & 4.5” OPTIONAL ACCESSORIES C6159 C5651 C2310 Rear Add-a-Leaf 07-15 GM 1500 Skid Plate 07-15 GM Upper Control Arm Kit (Steel Knuckle Models Only) NOTES (C25/C26/C27/C28) 1. All wheel drive models require drive line modification 2. Frame bracket modification and minor welding required 3. To reduce trimming required 20” wheels with 5-3/4” backspacing recommended 4. 6.5” Kit only - Add-a-leaf option recommend for crew cab models for a more level stance 5. The Factory 17” and 18” wheels cannot be reinstalled with the lift. OPTIONAL ACCESSORY Optional Zone Skidplate C5651 $59.95 (Note: Red backing plate not included) ZONEOFFROAD.COM 4.5” SUSPENSION SYSTEM 16 $49.95 $59.95 $395.95 4.5” IFS Knuckle / 4” Rear Block Kit # C27 Cast Steel Control Arms Kit # C28 Aluminum/Stamped Steel Control Arms $1,195.95 or (1) (1) 1 1 2 C2650 C2652 C2651 C2456 4759 Box Kit 1 of 3 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Shock Kit # C27N w/ Nitro Shocks Kit # C28N w/ Nitro Shocks $1,209.59 (2) 7759 Rear Nitro Shock 6.5” Lift Kit - 35” Atturo M/T - 20” American Racing 4.5” KIT QUICK SPECS - 4.5” KIT QUICK SPECS - 35” TIRES 33” TIRES Skill Level: 4 of 5 Estimated install time: 8 hrs Max tire size: 35 x 12.50 Wheel size: 20x9 Backspacing: 5.75” Skill Level: 4 of 5 Estimated install time: 8 hrs Max tire size: 33 x 12.50 Wheel size: 17 x 9, 18 x 9 Backspacing: 5” 4.5” SUSPENSION SYSTEM 4.5” IFS Knuckle / 5” Rear Block Kit # C35 Cast Steel Control Arms Kit # C36 Aluminum/Stamped Steel Control Arms $899.95 or 1 (1) 1 2 C2650 C2652 C2453 4759 Box Kit 1 of 2 Box Kit 1 of 2 Box Kit 2 of 2 Rear Shock Kit # C35N w/ Nitro Shocks Kit # C36N w/ Nitro Shocks $910.49 (2) 7759 Rear Nitro Shock The 4.5’’ system for the 2WD 1/2-ton GM trucks mimics the geometry of the tried and true, FMVSS No.126 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are brake line brackets, sway bar relocation, rear 4’ blocks, u-bolts, your choice of hydro or nitro rear shocks and all the necessary hardware to complete the install. 4.5” KIT QUICK SPECS Skill Level: 4 of 5 Estimated install time: 8 hrs Max tire size: 33 x 12.50 Wheel size: 17 x 9 w/ 5” Backspacing 18 x 9 w/ 5”-5.25” Backspacing 20 x 9 w/ 5.5”-5.75” Backspacing NOTES (C35/C36) 1. To reduce trimming required for tire fitment, a 20” wheel w/5.75” backspacing is recommended 2. The Factory 17” and 18” wheels cannot be reinstalled with the lift. 4.5" & 6.5" OPTIONAL ACCESSORIES C5651 C6159 Front Skidplate Rear Add-A-Leaf Kit $59.95 $49.95 Optional Zone Skidplate C5651 $59.95 (Note: Red backing plate not included) 6.5” SUSPENSION SYSTEM 6.5” IFS Knuckle / 5” Rear Block Kit # C33 Cast Steel Control Arms Kit # C34 Aluminum/Stamped Steel Control Arms $899.95 or 1 (1) 1 2 C2650 C2652 C2653 4759 Box Kit 1 of 2 Box Kit 1 of 2 Box Kit 2 of 2 Rear Shock Kit # C33N w/ Nitro Shocks Kit # C34N w/ Nitro Shocks $910.49 (2) 7759 Rear Nitro Shock CHEVROLET/GMC 2014-2015 1500 PICKUP 2WD The 6.5’’ system for the 2WD 1/2-ton GM trucks mimics the geometry of the tried and true, FMVSS No.126 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are brake line brackets, sway bar relocation, rear 5’’ blocks, u-bolts, your choice of hydro or nitro rear shocks and all the necessary hardware to complete the install. 6.5” KIT QUICK SPECS Skill Level: 4 of 5 Estimated install time: 8 hrs Max tire size: 35 x 12.50 Wheel size: 17 x 9 w/ 5” Backspacing 18 x 9 w/ 5”-5.25” Backspacing 20 x 9 w/ 5.5”-5.75” Backspacing NOTES (C33/C34) 1. To reduce trimming required for tire fitment, a 20” wheel w/5.75” backspacing is recommended 2. The Factory 17” and 18” wheels cannot be reinstalled with the lift. 888-998-ZONE 6.5” Lift Kit - Federal M/T - 20” XD Bomb 17 CHEVROLET/GMC 2014-2016 1500 PICKUP 2WD/4WD 3.5" COMBO SYSTEM Kit# C1351 $229.95 n Combines 1.5” Body Lift with 2” Leveling Kit n Front and Rear Bumper Brackets Included n No Strut Compressor or Strut Dissassembly Required n Retains Stock Ride Quality QUICK SPECS Skill Level: 3 of 5 Estimated Install Time: 4-5 hrs Max Tire Size: 33 x 12.50 Wheel Size: Stock NOTES (C1351) 1. Minor trimming of the factory front bumper brackets required OPTIONAL ACCESSORIES 4719 7719 C2310 Rear Shock (2req’d) Rear Nitro Shock (2req’d) 07-15 GM Upper Control Arm Kit (Steel Knuckle Models Only) $34.68 $41.50 $395.95 C1351 2” LEVELING KIT Kit# C1200 $69.95 n Solid 1-Piece Corrosion Proof Design n No Strut Compressor or Strut Dissassembly Required n Retains Stock Ride Quality n Fast & Easy Install QUICK SPECS Skill Level: 2 of 5 Estimated install Time: 1 hr Max Tire Size: 285/70R17 or 285 Wheel Size: Stock NOTES (C1200) 1. Will not fit 2007 Classic models. 2. Will not fit MagnaRide magnetic ride control equipped models OPTIONAL ACCESSORIES 4719 7719 C2310 Rear Shock (2req’d) Rear Nitro Shock (2req’d) 07-15 GM Upper Control Arm Kit (Steel Knuckle Models Only) $34.68 $41.50 $395.95 Kit# C2310 $395.95 n Excellent replacement for light duty factory control arms n Offers more “droop” travel when used with properly designed leveling and 4”-6” suspension lifts n UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stores when needed many miles down the road. - Raybestos #500-1103B n Include optional weld-on steering stops NOTES (C2310) n Fully welded 1/8” plate steel construction 1. 2014-16 models - will ONLY work on steel n CNC machined ball joint mounts knuckle equipped trucks. 2” LIFT KIT ZONEOFFROAD.COM Kit# C1210 $129.95 n 2” Front Strut Spacer and 2” Rear Block Kit n No Strut Compressor or Strut Dissassembly Required n Maintains a Tail High Stance n Fast & Easy Install QUICK SPECS Skill Level: 2 of 5 Estimated install Time: 4 hr Max Tire Size: 285/55 R20 Wheel Size: Stock 2. Includes a pair (2) of upper control arms NOTES (C1210) 1. This system is for the new body style ‘07 models. It will not fit ‘07 Classic models. 2. Will not fit MagnaRide magnetic ride control equipped models OPTIONAL ACCESSORIES 4719 7719 C2310 Rear Shock (2req’d) Rear Nitro Shock (2req’d) 07-15 GM Upper Control Arm Kit (Steel Knuckle Models Only) $34.68 $41.50 $395.95 1.5” BODY LIFT Kit# C9151 $179.95 n Class 10.9 Body Mount Bolts Included n Front and Rear Bumper Brackets Included n Front Tow Hooks Retained n Much Easier To Install Than Taller Body Lifts QUICK SPECS Skill Level: 2 of 5 Installation Time: 3-5 hrs 18 UPPER CONTROL ARM KIT NOTES (C9151) 1. Will NOT fit 2007 - 2013 models. 2. Will NOT fit Denali models 2. Will not fit MagnaRide magnetic ride control equipped models C9151 6.5” SUSPENSION SYSTEM 6.5" Knuckle/ 5" Rear Block Kit # C1 $1,295.95 1 1 1 2 C2600 C2601 C2606 4759 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Shock (2) 7759 Rear Nitro Shock or Kit # C1N $1309.59 n C1 Includes new coil over struts valved for larger tires. This means improved handling and ride quality compared to spacer kits on the market. 3.5” ADVENTURE SERIES UCA LIFT KIT 3.5" UCA/ 3” Rear Block Kit #C29 $749.95 or 1 1 2 C2350 C1309 4719 Main Box Kit 3” Rear Block Kit Rear Shock Kit # C29N $763.59 (2) 7719 Rear Nitro Shock n Fully welded, heavy duty upper control arms that dwarf the factory arms. n CNC-machined UCA bushing and ball joint cups. n OE rubber bushings and greasable factory style ball joints for quiet, reliable, and low maintenance operation. n Improved UCA range of motion compared to stock arms n UCAs utilize replaceable ball joints 3.5” QUICK SPECS Skill Level: 3 of 5 Estimated Install Time: 3-4 hrs Max Tire Size: 285/70-17 Wheel Size: 17x9 w/ 5” Backspacing NOTES (C29) 1. Certain tire/wheel packages can fit with the addition of the provided weld-on steering stops. These are necessary for deeper backspaced wheels to maintain proper tire clearance to the new upper control arms. 2. Minor frame and front differential trimming required - see installation instructions for details 3. Do Not combine with any other suspension lift 4.5" & 6.5" OPTIONAL ACCESSORIES C5651 Front Skidplate $59.95 C6159 Rear Add-A-Leaf Kit $49.95 C2310 07-15 GM Upper Control Arm Kit $395.95 Skill Level: 4 of 5 Estimated Install Time: 8 hrs Max Tire Size: 35 x 12.50 Wheel Size: 17 x 9 w/ 5” Backspacing 18 x 9 w/ 5.25” Backspacing 20 x 9 w/ 5.75” Backspacing 6.5" SPACER KIT OPTIONAL ACCESSORIES C5651 Front Skidplate C6159 Rear Add-A-Leaf Kit $59.95 $49.95 NOTES (C40) 1. All wheel drive models require front driveline modification 2. Will not fit 2007 Classic models 3. Minor frame bracket modification required 4. To reduce trimming for tire clearance, 20x9 w/5.5-5.75” BS recommended 5. Add-a-leaf kit C6159 recommended for crew cab models to achieve more level stance 6. Will not fit hybrid models with electric power steering 4.5” SUSPENSION SYSTEM 4.5" Knuckle/ 4" Rear Block Kit # C8 $1,295.95 1 1 1 2 C2600 C2601 C2406 4759 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Shock (2) 7759 Rear Nitro Shock or Kit # C8N $1309.59 This system includes everything in the 6.5” system. The only difference is the 4.5” system includes different struts to net 4.5” of lift. 6.5” QUICK SPECS 4.5” QUICK SPECS Skill Level: 4 of 5 Estimated Install Time: 8 hrs Max Tire Size: 35 x 12.50 Wheel Size: 17 x 9 w/ 5” Backspacing 18 x 9 w/ 5” Backspacing 20 x 9 w/ 5.75” Backspacing Skill Level: 4 of 5 Estimated Install Time: 8 hrs Max Tire Size: 33 x 12.50 Wheel Size: 17 x 9 w/ 5” Backspacing 18 x 9 w/ 5” Backspacing 20 x 9 w/ 5.75” Backspacing NOTES (C1/C8) 1. All wheel drive models require front driveline modification. 2. Will not fit 2007 Classic models. 3. Strut compressor required for installation. 4. Frame bracket modification and minor welding required. 5. To reduce trimming required 20" wheels with 5 1/2 to 5 3/4" backspacing recommended. 6. 6.5" Kit: Add-A-Leaf C6159 recommended for crew cab models for a more level stance. 7. 4” Kit: Add-A-Leaf C6159 recommended for a tail high stance. 8. Will not fit 2009-12 two-mode hybrid models with electronic power steering (eps). 6.5” SPACER SUSPENSION SYSTEM 6.5" Strut Spacer/ 5" Rear Block 1 Kit # C40 1 $999.95 1 2 or C2643 C2644 C2645 4759 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Shock Kit # C40N $1,010.49 7759 Rear Nitro Shock (2) Zone Offroad now offers a strut spacer alternative to our popular 07-13 6.5” replacement strut system. This new kit includes many of the same features as the current replacement strut kit but is geared more toward those that don’t need the added performance of the replacement strut. The new strut spacer system still utilized the tried-and-true combination of ductile cast iron, precision machine steering knuckles along with 1-piece heavy duty crossmembers to help make the lift possible. A differential skid plate is included along with all the necessary differential and sway bar relocation brackets. The heavy duty, fully welded strut spacers bolt directly to the top of the factory strut and do not require disassembly of the strut. 888-998-ZONE 6.5” SPACER KIT QUICK SPECS The Zone Offroad Suspension system yields the best performance for the price! The ¼” thick one piece crossmembers maintain a factory appearance and improve ground clearance over stock. In addition to an impressive differential skid plate that locks the crossmembers together, a strut bar is added on the passenger side to ensure a solid sub-frame. The CNC machined ductile iron steering knuckles ensure proper steering geometry as well as reduce installation time compared to a drop bracket system. To top it off, this kit includes new front coil-over struts. Combine all of these factors and you can lock in the Zone 6.5” system as the best value on the market! CHEVROLET/GMC 2007-2013 1500 4WD In the back, Zone Offroad only uses solid cast rear lift blocks as opposed to fabricated blocks and limits the height to 5”. If you need additional rear height, Zone offers a preferred adda-leaf to fight spring wrap and yield additional height. Nitro rear shock option available. 19 CHEVROLET/GMC 2007-2013 1500 2WD 6.5” SUSPENSION SYSTEM 6.5” Knuckle/ 5” Rear Block Kit # C2 $999.95 or 1 1 2 C2600 C2602 4759 Box Kit 1 of 2 Box Kit 2 of 2 Rear Shock Kit # C2N $1,013.59 (2) 7759 Rear Nitro Shock The Zone Offroad Suspension system yields the best performance for the price! The ¼” thick one piece crossmembers maintain a factory appearance and improve ground clearance over stock. To create a solid subframe, the system includes two strut bars to secure the crossmembers together. The CNC machined ductile iron steering knuckles ensure proper steering geometry as well as reduce installation time compared to a drop bracket system. To top it off, this kit includes new front coil-over struts versus a simple strut spacer found in other systems on the market. Combine all of these factors and you can lock in the Zone 6.5” system as the best value on the market! KIT NOTES (C2) 1. Will not fit 2007 Classic models 2. Strut compressor required for installation 3. To reduce trimming required 20” wheels with 5-1/2 to 5-3/4” backspacing recommended 4. Add-a-leaf option recommend for crew cab models for a more level stance 5. Will not fit 2009-11 Two-Mode Hybrid models with Electronic Power Steering (EPS) 6. Will not work on extended/crew cab long box vehicles 4.5” Knuckle/ 4” Rear Block Kit # C9 $999.95 or 1 1 2 C2600 C2402 4759 Box Kit 1 of 2 Box Kit 2 of 2 Rear Shock Kit # C9N $1,013.59 (2) 7759 Rear Nitro Shock This system includes everything in the 6.5” system. The only difference is the 4.5” system includes different struts to net 4.5” of lift. 6.5” KIT QUICK SPECS 4.5” KIT QUICK SPECS Skill Level: 4 of 5 Skill Level: 4 of 5 Estimated Install Time: 4-5 hrs Estimated Install Time: 4-5 hrs Max Tire Size: 35 x 12.50 Max Tire Size: 33 x 12.50 Wheel Size: 17 x 9 w/ 5” Backspacing Wheel Size: 17 x 9 w/ 5” Backspacing 18 x 9 w/ 5” Backspacing 18 x 9 w/ 5” Backspacing 20 x 9 w/ 5.75” Backspacing 20 x 9 w/ 5.75” Backspacing ZONEOFFROAD.COM valved for larger tires. This means improved handling and ride quality compared to spacer kits on the market. 4.5" & 6.5" OPTIONAL ACCESSORIES C5651 C6159 C2310 Front Skidplate $59.95 Rear Add-A-Leaf Kit $49.95 07-15 GM Upper Control Arm Kit $395.95 Optional Zone Skidplate C5651 $59.95 (Note: Red backing plate not included) 4.5” SUSPENSION SYSTEM 20 n C2 Includes new coil over struts KIT NOTES (C9) 1. Will not fit 2007 Classic models. 2. Strut compressor required for installation. 3. To reduce trimming required 20” wheels with 5 1/2 to 5 3/4” backspacing recommended. 4. Add-A-Leaf C6159 recommended a tail high stance. 5. Will not work on extended/crew cab long box vehicles. 3.5” ADVENTURE SERIES UCA LIFT KIT 3.5" UCA/ 3” Rear Block Kit #C30 $619.95 or 1 1 2 C2351 C1309 4719 Main Box Kit 3” Rear Block Kit Rear Shock Kit # C30N $633.59 (2) 7719 Rear Nitro Shock 3.5” QUICK SPECS Skill Level: 3 of 5 Estimated Install Time: 3-4 hrs Max Tire Size: 285/70-17 Wheel Size: 17 x 9 w/ 5” Backspacing NOTES (C30) 1. Certain tire/wheel packages can fit with the addition of the provided weld-on steering stops. These are necessary for deeper backspaced wheels to maintain proper tire clearance to the new upper control arms. 2. Minor frame and front differential trimming required - see installation instructions for details 3. Do Not combine with any other suspension lift 4. Does Not Fit 4WD Models 6.5” Lift Kit - 35x12.50 Toyo AT2 Tires - XD Misfit Wheels 3.5" COMBINATION SYSTEM Kit# C1350 $199.95 Looking for an affordable lift to clear 33’s? Spacer kits with more than 2" of lift cause premature wearing of the upper ball joints. Upper control arm lifts with new joints lead to increased camber changes during suspension travel. Zone Offroad has engineered the perfect, best performing solution. We’ve combined a 2" leveling lift with a 1.5" body lift to give optimum performance at a budget price. QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 3 hrs Max Tire Size: 33 x 12.50 Wheel Size: Stock NOTES (C1350) 1. Will not fit 2007 Classic models. 2. Will not fit Denali models. 3. The optional rear bumper relocation system is for appearance only and cannot be used for towing. OPTIONAL ACCESSORIES C9909 C9901 4719 7719 C2310 C1350 Rear Bumper Brackets Full Replacement Front Bumper Brackets Rear Shock (2req'd) Rear Nitro Shock (2req'd) 07-15 GM Upper Control Arm Kit Optional 1.5” Rear Bumper Brackets C9909 $49.95 UPPER CONTROL ARM KIT Kit# C2310 $395.95 n Excellent replacement for light duty factory control arms n Offers more “droop” travel when used with properly designed leveling and 4”-6” suspension lifts n UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stores when needed many miles down the road. - Raybestos #500-1103B n Include optional weld-on steering stops n Fully welded 1/8” plate steel construction NOTES (C2310) 1. 2014-15 models - will ONLY work on steel n CNC machined ball joint mounts knuckle equipped trucks. 2. Includes a pair (2) of upper control arms $49.95 $44.95 $34.68 $41.50 $395.95 CHEVROLET/GMC 2007-2013 1500 2WD/4WD Full Replacement 1.5” Front Bumper Brackets C9901 $44.95 2" LEVELING KIT Kit# C1200 $69.95 Tired of the front of your truck being lower than the rear? This 2" strut spacer lift is the answer. This spacer kit is easy to install and no strut compressor or disassembly of the strut is required. These are made from Polyphthalamide which is a thermoplastic synthetic resin commonly used to replace metals in automotive applications. These have been specifically engineered and molded to take some of the sheer load off the strut mounting bolts for a durable assembly. These strut spacers will level your truck while still maintaining the factory ride quality. QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 1 hr Max Tire Size: 285/70R17 or 285 Wheel Size: Stock NOTES (C1200) 1. Will not fit 2007 classic models. OPTIONAL ACCESSORIES 2" LIFT KIT C1200 Kit# C1210 $129.95 Includes 2" rear blocks and u-bolts, and the 2" front strut spacers with a package price if you would prefer to lift your whole truck. QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 4 hrs Max Tire Size: 285/55 R20 Wheel Size: Stock NOTES (C1210) 1. This system is for the new body style ‘07 models. It will not fit ‘07 Classic models. OPTIONAL ACCESSORIES 4719 Rear Shock (2 req'd)$34.68 7719 Rear Nitro Shock (2 req'd)$41.50 C2310 07-15 GM Upper Control Arm Kit $395.95 C1210 888-998-ZONE 4719 Rear Shock (2 req’d)$34.68 7719 Rear Nitro Shock (2 req’d)$41.50 C2310 07-15 GM Upper Control Arm Kit $395.95 Lower strut spacers provide the easiest install of any leveling kit on the market. No strut removal or disassembly is required. 21 CHEVROLET/GMC 2007-2013 1500 2WD/4WD 3" BODY LIFT Kit# C9350 $374.95 n Class 10.9 Body Mount Bolts Are Included n Front and Rear Bumper Relocation Brackets n Machined Steering Extension Included n Emergency Brake Line Relocation Bracket n Front Tow Hooks Retained QUICK SPECS Skill Level: 2 of 5 Installation Time: 8 hrs Max Tire Size: 32 x 12.50 Wheel: Stock NOTES (C9350) 1. Will not fit regular cab, long box configuration. 2. Will not fit Denali models. 3. Will not fit 2007 Classic models. 4. The rear bumper is for appearance only. Can not be used for towing. 5. Manual transfer case models may require linkage modification. C9350 1.5" BODY LIFT Kit# C9150 $149.95 n Class 10.9 Body Mount Bolts Are Included n Front Bumper Relocation n Front Tow Hooks Retained n Optional Rear Bumper Relocation Available n Much Easier To Install Than Taller Body Lifts C9150 QUICK SPECS Skill Level: 2 of 5 Installation Time: 3-5 hrs OPTIONAL ACCESSORIES ZONEOFFROAD.COM C9909 Rear Bumper Brackets$49.95 C9901 Full Replacement Front Bumper Brackets$44.95 22 NOTES (C9150) 1. Will NOT fit 2007 Classic models. 2. Will NOT fit Denali models 3. The optional rear bumper relocation system is for appearance only and cannot be used for towing. 3” Body Lift - 305/55r18 ATZs - stock 18s Full Replacement 1.5” Front Bumper Brackets C9901 $44.95 Optional 1.5” Rear Bumper Brackets C9909 $49.95 6" SUSPENSION SYSTEM 4WD Kit# C3 $1,299.95 6" Knuckle/ 5" Rear Block Kit # C3 $1,299.95 1 1 1 2 2 C2610 C2611 C2612 4602 4759 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Front Shock Rear Shock (2) (2) 7602 7759 Front Nitro Shock Rear Nitro Shock or Kit # C3N $1,327.23 C3 n 1/4” thick crossmembers are made to give a factory-like appearance and correct the suspension geometry for 6" of lift n Compression struts included for a solid subframe NOTES (C3) 1. Torsion bar unloading tool required. 2. Requires frame bracket modification and differential mount modification. 3. Will not fit HD models. See kit #C4 4. Compression struts won’t work with early ‘99 models with an “S” shaped transmission crossmember. 5. If equipped with 17” stock wheels, 17” or larger aftermarket wheels must be used. 6. Minor welding required. 7. Will not fit old body style 1999 models. 8. It may be required to order the rear add-a-leaf kit C6159 for a slightly above level to tail high appearance. 9. Optional Add-a-leaf kit is recommended on Crew Cab models to achieve more level stance. The Zone Offroad suspension system for the 99-06 Chevy and GMC trucks is designed for a everyday driver, but is made to handle offroad use. The main crossmembers were designed to match the factory geometry and appearance. Combined with the CNC machined steering knuckles everything is relocated to factory specs creating a true factory quality driving experience. This is a go anywhere system as it comes with compression struts for added frame support. QUICK SPECS Skill Level: 4 of 5 Estimated Install Time: 8 hrs Max Tire Size: 35x12.50 Wheel Size: 16x8 w/ 4.5" Backspacing 20x8 w/ 5.75” Backspacing RECOMMENDED ACCESSORIES 3100 Steering Stabilizer $73.35 7100 Steering Stabilizer (Black) $79.35 C6159 Rear add-a-leaf (tail high stance) $49.95 2” TORSION BAR KEYS 3.5” COMBO KIT Kit# C1201 $99.95 Kit# C1354 1999-2002 $249.95 Kit# C1353 2003-2005 $249.95 Kit# C1352 2006-2007 Classic $249.95 Zone Offroad torsion bar keys are made in the USA and are 100% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent 2” of lift with the adjustment bolts in the factory location. Optional, custom valved shocks available. CHEVROLET/GMC 1999-2006 1500 4WD QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 1 hr Max Tire Size: 285/70R17 Wheel Size: Stock NOTES (C1201) 1. Torsion Bar unloading/loading tool required 2. Optional shocks will not fit 1999 old body style trucks, use 88-98 listing. C1354 Kit# C1211 $149.95 Includes 2” rear blocks and u-bolts with 2” torsion bar keys. If you prefer to raise the whole truck and keep the factory tail high stance. If you’re looking to go taller than 2” but are not interested in the expense of a full IFS system, our 3.5” combination lift is the answer. Beware of torsion key systems taller than 2” that can adversely affect your ride. This system will clear 33’s with your stock wheels for a clean lift at a low cost. NOTES (C1354/C1353/C1352) OPTIONAL ACCESSORIES (C1201 & C1211) QUICK SPECS 4612 4719 7612 7719 3100 7100 Front Shock (2 req’d) Rear Shock (2 req’d) Front Nitro Shock (2 req’d) Rear Nitro Shock (2 req’d) Steering Stabilizer Steering Stabilizer (Black) QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 4 hrs Max Tire Size: 285/70 Wheel Size: Stock $34.68 $34.68 $41.50 $41.50 $73.35 $79.35 NOTES (C1211) 1. Torsion bar unloading tool required. 2. Will not fit 1500HD models, see kit # C1212/C1213 to verify RPO code based fitment. 3.Optional Hydro or Nitro shocks available - see accessories section below and be sure to select the proper year range when ordering Skill Level: 2 of 5 Installation Time: 4 hrs Max Tire Size: 33x12.50 Wheels: Stock 1. Will not fit HD models. 2. If rear bumper bracket system is purchased and installed, the rear bumper cannot be used for towing. The rear bumper system is for appearance only. 3. Torsion bar unloading tool required for install. 4. C1352 systems do not fit new body style 2007 models. OPTIONAL ACCESSORIES C9908 3100 7100 4612 4719 7612 7719 Rear Bumper Brackets $44.95 Steering Stabilizer $73.35 Steering Stabilizer (Black) $79.35 Front Hydro Shock (2 req’d)$34.68 Rear Hydro Shock (2 req’d) $34.68 Front Nitro Shock (2 req’d) $41.50 Rear Nitro Shock (2 req’d) $41.50 888-998-ZONE 2” LIFT KIT 23 CHEVROLET/GMC 1999-2006 1500 2WD/4WD 3" BODY LIFT Kit# C9355 Kit# C9354 Kit# C9353 Kit#C9352 1999-2000 2001-2002 2003-2005 2006-2007 Classic $307.95 $307.95 $342.95 $385.95 n Class 10.9 Body Mount Bolts Are Included n Front and Rear Bumper Relocation n Steering Extension Included n Radiator Relocation Brackets Included QUICK SPECS Skill Level: 3 of 5 Installation Time: 6-8 hrs NOTES (C9355/C9354/C9353/C9352) 1. Will not fit heavy duty (1500 HD) models 2. Will NOT fit Denali models due to differences in the bumper brackets. 3. The rear bumper relocation system is for appearance only. Once this system is installed the rear bumper cannot be used for towing 4. Manual transmission models will require shifter extension # C9806 5. C9355 - WIll not fit 1999 old body style trucks. C9353 1.5" BODY LIFT Kit# C9154 1999-2002 $159.95 Kit# C9153 2003-2005 $159.95 Kit# C9152 2006-2007 Classic $165.95 This 1.5" body lift is perfect to add just that little extra tire clearance that you need. Combine this body lift with a leveling kit and you have the perfect combination. The system relocates the front bumper to maintain a factory look. An optional rear bumper relocation system is available. Grade 10.9 body bolts are included along with Zone Offroad's crushproof body blocks. QUICK SPECS Skill Level: 2 of 5 Installation Time: 3-4 hrs OPTIONAL ACCESSORIES ZONEOFFROAD.COM C9908 Rear Bumper Brackets$44.95 24 NOTES (C9154/C915/C9152) 1. Will not fit HD models. 2. C9152 Will not fit Denali models 3. If rear bumper bracket system is purchased and installed, the rear bumper cannot be used for towing. The rear bumper system is for appearance only. 4. C9152 systems do not fit new body style 2007 models. 1.5” Body Lift - 32” BFG A/T - 16” Ultra Badland C9154 6" DROP BRACKET SYSTEM Photo shows kit with Nitro shocks upgrade NOTES (C14) 1. Torsion bar un-loading tool required 2. Not designed for 4 door model Tahoe and Yukon 3. Requires exhaust modification to clear the front driveshaft 4. Requires frame bracket modification and differential mount modification 5. Models equipped with auto-trac may require a new front driveshaft. The auto-trac (New Process 246) transfer case can be identified by the badge on the rear of the transfer case that reads “NP246”. In addition, the dash mounted display will show the Auto 4WD symbol. (NP243 is not auto-trac) 6" Drop Bracket / 5" Rear Block 1 Kit # C14 1 $1,195.95 1 1 2 2 or C2640 C2641 C2642 C2649 4600 4609 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Box Kit Front Shock Rear Shock Kit # C14N $1,223.23 7600 7609 Front Nitro Shock Rear Nitro Shock 2 2 Introducing the latest addition to the Zone Offroad line of Chevy and GMC products, our 88-98 K1500 6” Suspension System incorporates a completely new and improved design compared to the other bracket style kits on the market. Zone Offroad took a different approach with this kit by utilizing 1-piece upper control arm drop brackets to correct the ball joint geometry and maintain the use of your factory steering knuckles. A few of the advantages to this setup are no track width change and factory wheels can be re-used with 35x12.50 tires. Like our other systems, the kit comes with stout main crossmembers and differential drop brackets to re-align the CV shafts and driveshaft while maintaining a clean look. Make your truck stand out from the rest with our new 6” lift engineered with not only affordability, but the quality many have come to expect from Zone Offroad Products. CHEVROLET/GMC 1988-1998 1500 4WD & 2500 6-LUG 4WD 1992-1998 YUKON, TAHOE 2-DOOR 6-LUG, SUBURBAN 6-LUG QUICK SPECS Skill Level: 4 of 5 Estimated Install Time: 8 hrs Max Tire Size: 35 x 12.50 Wheel Size: Factory and larger diameter Back Spacing: Factory or less backspacing OPTIONAL ACCESSORIES 3104 Single Steering Stabilizer$57.49 888-998-ZONE 6” Lift Kit - 35x12.50 ATZs - 20x9 Eagle 079s 25 CHEVROLET/GMC 1988-1998 1500 4WD 2" LIFT KIT W/ 2" REAR BLOCK Kit# C1211 $149.95 Includes 2" rear blocks and u-bolts with 2" torsion bar keys. If you prefer to raise the whole truck and keep the factory tail high stance. QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 4 hr Max Tire Size: 285/70 Wheel Size: Stock OPTIONAL ACCESSORIES 4601 4608 7601 7608 Front Shock (2 req’d) Rear Shock (2 req'd) Front Nitro Shock (2 req'd) Rear Nitro Shock (2 req'd) $34.68 $34.68 $41.50 $41.50 C1211 NOTES (C1211) 1. Torsion bar unloading tool required. 2. Will not fit 1500HD models, see kit # C1212/C1213 to verify RPO code based fitment. 3. Optional Hydro or Nitro shocks available - be sure to select the proper year range when ordering. 2" TORSION BAR KEYS Kit# C1201 $99.95 Zone Offroad torsion bar keys are made in the USA and are 100% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent 2” of lift with the adjustment bolts in the factory location. Optional, custom valved shocks available. QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 1 hr Max Tire Size: 285/70 Wheel Size: Stock C1201 OPTIONAL ACCESSORIES ZONEOFFROAD.COM 4601 4608 7601 7608 26 Front Shock (2 req’d)$34.68 Rear Shock (2 req'd)$34.68 Front Nitro Shock (2 req'd)$41.50 Rear Nitro Shock (2 req'd)$41.50 NOTES (C1201) 1. Torsion Bar unloading/loading tool required 2. Optional shocks will not fit 1999 old body style trucks, use 88-98 listing. 3" BODY LIFT Kit# C9357 1988-1994 Kit# C9356 1995-1998 $176.95 $191.95 nFan Shroud Relocation Included nFuel Fill Extension Included n No Welding Required nMachined Steering Extension Included nBody Lift Blocks capable of handling 60,000 lbs nFront Bumper Relocation Brackets Included C9356 QUICK SPECS Skill Level: 3 of 5 Estimated Install Time: 8 hrs Wheel Size: Stock OPTIONAL ACCESSORIES C9950 Rear Bumper Bracket Relocation Kit$62.95 NOTES (C9357/C9356) 1. Will not fit vehicles with a diesel motor. 2. Rear bumper brackets are for appearance only. The rear bumper cannot be used for towing after installation. 3. Fits standard, extended, and crew cab; long and short box configuration. C9950 5" SUSPENSION SYSTEM 5" Knuckle/ 3" Rear Block w/o Top Overload Springs Kit # C12N $1,399.94 The heart of the Zone Offroad 5" 2011-16 HD lift kit is a pair of one piece ¼” steel crossmembers combined with the CNC machined steering knuckles to create OE geometry for a quality ride. Also included is a laser cut differential skid plate, differential support brackets, torsion bar brackets, sway bar links, offset rear 3" lift blocks, stainless steel brake lines and custom valved shocks. This system is designed to level the truck and has zero change to the vehicle's track width allowing for clearance of up to 35x12.50 tires. No differential trimming required! NOTES (C12N/C13N) 1. Torsion bar unloading/loading tool required 2. Frame bracket modifications required for installation 3. With a 20" Wheel, 5"-6" backspacing is recommended 4. Rear kit designed for single rear wheel axles. 5. Stock 17” or 18” Wheels cannot be re-installed 6. Will fit 2wd models. The front differential related parts will not be used. 7. Factory 20” wheels with More than 6” total backspacing cannot be reinstalled with the lift. 8. Factory 20” x 8.5” wheels with 6” backspacing or less will fit with a max tire size of 35x12.50 5" Knuckle/ 3" Rear Block w/ Top Overload Springs Kit # C13N $1,399.94 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 C2630 C2631 C2632 C2633 C2634 C2639 7613 7759 C2630 C2631 C2632 C2633 C2634 C2638 7613 7759 Box Kit 1 of 5 Box Kit 2 of 5 Box Kit 3 of 5 Box Kit 4 of 5 Box Kit 5 of 5 Rear Box Kit Front Nitro Shock Rear Nitro Shock Box Kit 1 of 5 Box Kit 2 of 5 Box Kit 3 of 5 Box Kit 4 of 5 Box Kit 5 of 5 Rear Box Kit Front Nitro Shock Rear Nitro Shock QUICK SPECS Installation Skill Level: 4 of 5 Estimated Install Time: 6-8 hrs Max Tire Size: 35x12.50 Wheel Size: 17x9 / 18x9 (w/ 4.5"-4.625" Backspacing) 20x9 (w/ 5"-6" Backspacing) Over 20", use 20" specs CHEVROLET/GMC 2011-2016 2500HD & 3500HD 2WD/4WD OPTIONAL ACCESSORIES 3103 Single Steering Stabilizer$51.95 7103 Single Steering Stabilizer (Black)$56.95 C37N This new system uses the popular Zone Adventure Series boxed steel upper control arm design along with traditional torsion key technology in order to gain 3” of lift. By using the new fabricated arms, equipped with factory style ball joints and rubber bushings, the system is able to maintain a better quality ride and suspension travel over standard “leveling kits”. In addition, a front differential drop is included to keep CV angles within the factory operating range. Rear 2” blocks bring the rear up to give a very slight tail high stance allowing the truck to be used as it was intended without having a saggy ride. Front and rear Nitro shocks come standard to round out this simple yet advanced suspension system. NOTES (C37N/38N) 1. Minor trimming may be required, especially if a wheel backspace of less the specified is used.` 2. Proper torsion bar unloading tool required for installation. 3. Not designed for dually models. HEAVY DUTY UCA KIT Kit# C2312 $429.95 3” UCA/ 2” Rear Block w/o Top Overload Springs Kit # C37N $752.45 3” UCA/ 2” Rear Block w/ Top Overload Springs Kit # C38N $779.95 1 1 2 2 1 1 2 2 C2311 C1207 7624 7757 C2311 C1208 7624 7757 Box Kit 1 of 1 Rear Box Kit Front Nitro Shock Rear Nitro Shock Box Kit 1 of 1 Rear Box Kit Front Nitro Shock Rear Nitro Shock QUICK SPECS - 35” TIRES QUICK SPECS - 34” TIRES Skill Level: 3 of 5 Estimated install time: 4-5 hrs Max tire size: 35 x 12.50 Wheel size: 20x9, 18x9 Backspacing: 6” Skill Level: 3 of 5 Estimated install time: 4-5 hrs Max tire size: 34 x 11.50 Wheel size: 17x9 Backspacing: 5-5.5” OPTIONAL ACCESSORIES 3103 Single Steering Stabilizer$51.95 7103 Single Steering Stabilizer (Black)$56.95 QUICK SPECSS Skill Level: 2 of 5 Estimated Install Time: 3-4 hrs Wheel Size: 17x9 (5-5.5” Backspacing) 18x9 (6” Backspacing) 20x9 (6” Backspacing) 2" LEVELING KIT Kit# C1204 $99.95 Zone Offroad torsion bar keys are made in the USA and are 100% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent 2" of lift with the adjustment bolts in the factory location. Shock relocation brackets or longer shocks are required and are listed in the recommend accessories. OPTIONAL ACCESSORIES (2” KITS & 2” TORSION BAR KEYS) C5202 7603 3103 7103 Front Shock Extension Kit$19.95 Front Nitro Shocks (2 req’d) $59.00 Single Steering Stabilizer $51.95 Single Steering Stabilizer (Black) $56.95 2" LIFT KIT Kit# C1244 - w/o Overload Kit# C1245 - w/ Overload $159.95 This system is designed to maintain the factory tail high stance of your truck by lifting the front and rear 2". This package includes 2" torsion bar keys, shock relocation spacers, rear blocks and u-bolts. Fit larger tires without effecting towing capability. 2” KIT QUICK SPECS Skill Level: 2 of 5 Estimated Install Time: 2” Torsion Bars - 1 hr, 2” Front & Rear - 2-3 hrs Max Tire Size: 34x11.50 Wheel Size: Stock/17x9/18x9/20x9 (5-6” Backspacing) 888-998-ZONE These new upper control arms are direct replacements for the factory arms, offering improved suspension travel and ride quality over the factory control arm design. 3" ADVENTURE SERIES UCA LIFT KIT NOTES (C1244/C1245/C1204) 1. Torsion bar unloading tool is required 2. 35x12.50 tires require minor trimming when used with factory backspaced wheels. If using wheels with less backspace than factory, 33” tires are recommended. 3. Shock extension spacers are necessary unless shocks longer than stock are installed. 27 CHEVROLET/GMC 2001-2010 2500HD & 3500HD 4WD 2001-2006 2500 NON-HD & 1500HD 4WD 2001-2006 SUBURBAN & AVALANCHE 2500 4WD 6" SUSPENSION SYSTEM 6" Knuckle/ 5" Rear Block Kit # C4 $1,295.95 or Kit # C4N $1,323.23 1 1 1 1 2 2 C2620 C2621 C2622 C2623 4605 4759 Box Kit 1 of 4 Box Kit 2 of 4 Box Kit 3 of 4 Box Kit 4 of 4 Front Shock Rear Shock (2) (2) 7605 7759 Front Nitro Shock Rear Nitro Shock The Zone HD system is built for everyday driving but sturdy enough for offroad abuse. The one piece main crossmembers in combination with the CNC machined ductile steering knuckles match the OE geometry for excellent ride and handling. The differential skid plate and the compression struts offer off-road protection for the serious trails. Complete with torsion bar brackets, differential drop brackets, CV spacers, sway bar links, rear blocks, ubolts and 4 twin tube hydraulic shocks for a smooth ride. If quality, performance and value are what you demand, then look no further! QUICK SPECS Skill Level: 4 of 5 Estimated Install Time: 8 hrs HD UPPER CONTROL ARM KIT Max Tire Size: 35x12.50 Wheel Size: 16x8 w/ 4.5" Backspacing ALSO AVAILABLE...SEE PAGE 17/18x9 w/ 5-5.5" Backspacing 20x9 w/ 5.75" Backspacing 27 6” KIT OPTIONAL ACCESSORIES C5612 C2300 Carrier Bearing Drop 01-10 GM Upper Control Arm Kit NOTES (C4) 1. Torsion bar unloading/loading tool required. 2. To reduce trimming on new body style HD’s 20” wheel with 5 3/4” backspacing recommended. 3. Gas models required minor exhaust modification to clear front driveshaft. 4. Also fits Avalanche/Suburban 2500 models. 5. Minor welding required. 6. Frame bracket and differential mount modifications required. 7. Vehicles equipped with a two piece drive shaft and a carrier bearing require bearing drop kit (C5612). 8. Not designed for dually models $49.95 $369.95 2” LIFT KIT Kit# C1212/C1213 2001-2010 2500HD $159.95 This system is designed to maintain the factory attitude of your truck by lifting the front and rear 2”. This package includes 2” torsion bar keys, shock relocation brackets, and rear blocks and u-bolts. Buy everything at once and save some cash to buy the Mrs. something nice. 3” ADVENTURE SERIES UCA LIFT SYSTEM ZONEOFFROAD.COM HD UPPER CONTROL ARM KIT ALSO AVAILABLE...SEE PAGE 3” UCA/ 2” Rear Block Kit # C31 $795.95 or Kit # C31N $823.23 3” UCA/ 2” Rear Block Kit # C32 $795.95 or Kit # C32N $823.23 SEE NOTE Kit# C1202/C1203 ‘01-10 2500HD/3500 $99.95 27 1 1 1 2 2 C2301 C2300 C1209 4616 4757 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Front Shock Rear Shock (2) (2) 7616 7757 Front Nitro Shock Rear Nitro Shock 1 1 1 2 2 C2302 C2300 C1209 4616 4757 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Front Shock Rear Shock (2) (2) 7616 7757 Front Nitro Shock Rear Nitro Shock Max Tire Size: 33x12.50 Wheel Size: 17x9 w/ 5" Backspacing 28 BEFORE ORDERING 2” LEVELING KIT n Fully welded, heavy duty upper control arms that dwarf the factory arms. n CNC-machined UCA bushing and ball joint cups. n OE rubber bushings and greasable factory style ball joints for quiet, reliable, and low maintenance operation. n Improved UCA range of motion compared to stock arms n UCAs utilize replaceable ball joints n Front torsion bar keys and rear block kit QUICK SPECS 4 SEE NOTE 4 BEFORE ORDERING Zone Offroad torsion bar keys are made in the USA and are 100% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent 2” of lift with the adjustment bolts in the factory location. Unlike the competition, Zone lists their torsion keys based on RPO codes to ensure proper fitment on each truck, so be sure to review note #3 to determine which kit number is required. Shock relocation brackets or longer shocks are required and are listed in the recommend accessories. 2” KIT QUICK SPECS SEE NOTE 4 BEFORE ORDERING Skill Level: 1 of 5 Estimated Install Time: 2" Torsion Bars - 2 hrs, 2" Front & Rear - 4 hrs Max Tire Size: 33x12.50 Wheel Size: Stock OPTIONAL ACCESSORIES (2" KITS & 2" TORSION BAR KEYS) C5201 4615 4757 7615 7757 C2300 Shock Relocation Brackets (C1202 & C1203 only) Front Shock (2 req’d) Rear Shock (2 req'd) Front Nitro Shock (2 req’d) Rear Nitro Shock (2 req’d) 01-10 GM Upper Control Arm Kit $30.00 $34.68 $34.68 $41.50 $41.50 $369.95 NOTES (C1202/C1203/C1212/C1213/C31/C32) 1. Frame bracket mount modification required (C31/C32) 2. Rear u-bolts will not fit dually applications. 3. Front shock relocation brackets or longer shocks recommended. (C1202/C1203) 4. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the factory installed torsion keys. Any of the following RPO codes require the C1202/C1212/C31 kits: FT2 – FT3 - FT4 – FT5 – FT6 – FT7. Any of the following RPO codes require the C1203/C1213/C32 kits: FK2 – FK3 – FF6 – FF7 – FF8 – FF9. 6" SUSPENSION SYSTEM 6" Knuckle/ 5" Rear Block Kit # C5 $1,149.96 1 1 1 1 2 2 C2620 C2607 C2608 C2623 4605 4759 Box Kit 1 of 4 Box Kit 2 of 4 Box Kit 3 of 4 Box Kit 4 of 4 Front Shock Rear Shock (2) (2) 7605 7759 Front Nitro Shock Rear Nitro Shock or C5 n ¼" thick crossmembers are made to give a factory-like appearance and correct the suspension geometry for 6" of lift n Compression struts included for a solid subframe. Kit # C5N $1,177.24 The Zone 2wd HD system is built for everyday driving but sturdy enough for offroad abuse. The one piece main crossmembers in combination with the CNC machined ductile steering knuckles match the factory geometry for excellent ride and handling. The crossmembers are locked together with strut braces and rear compression struts to handle the heavy duty use of your truck. Complete with torsion bar brackets, sway bar links, rear blocks, u-bolts and twin tube hydraulic shocks for a smooth ride. If quality, performance and value are what you demand, then look no further! QUICK SPECS CHEVROLET/GMC 2001-2010 2500HD 2WD & 2500 NON-HD 2WD 2001-2006 1500HD 2WD Skill Level: 3 of 5 Estimated Install Time: 6-8 hrs Max Tire Size:35x12.50 Wheel Size: 16 x 8 w/ 4.5" Backspacing 17/18 x 9 w/ 5”-5.5" Backspacing 20 x 9 w/ 5.75" Backspacing RECOMMENDED ACCESSORIES UPPER CONTROL ARM KIT 2WD & 4WD Kit# C2300 $369.95 n Fully welded 1/8” plate steel construction n CNC machined ball joint mounts n Direct replacement for OEM control arms n UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stores when needed many miles down the road. - Raybestos #500-1104B n HD UCA kit works great as a combo with leveling keys *See Important Notes n Also works well with most 6”-7” suspension lifts (see note 4) C5611 Carrier Bearing Drop (mounted above crossmember) $49.95 C5612 Carrier Bearing Drop (mounted below crossmember) $49.95 C2300 01-10 GM Upper Control Arm Kit $369.95 NOTES (C5) 1. Torsion bar unloading/loading tool required. 2. To reduce trimming on new body style HD’s 20" wheels with 5 3/4" backspacing recommended. 3. Gas models required minor exhaust modification to clear front driveshaft. 4. Although unusual, some models with a carrier bearing may experience driveline vibration. If this occurs, order appropriate carrier bearing drop listed in the accessories. 5. Not designed for dually models NOTES (C2300) 1. For leveling kit installations, the new arms should only be paired with the replacement Zone front shock #s 4615 or 7615. 2. C5201 shock relocation brackets should not be used. 888-998-ZONE 6” Lift Kit - 35x12.50 Kumho M/Ts - 18x9 Gear Alloys 29 CHEVROLET/GMC 2007-2014 AVALANCHE, SUBURBAN, TAHOE, YUKON, YUKON XL 1500 4WD 6.5" SUSPENSION SYSTEM 6.5" Knuckle/ 5.5" Rear Spring 1 Kit # C6 1 $1,739.99 1 2 or C2603 C2604 C2605 4759 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Shock Kit # C6N $1,753.63 7759 Rear Nitro Shock (2) This 6" system will give your ride the look as well as the on and offroad performance you are looking for from an aftermarket suspension system. Custom valved replacement struts are included to properly handle the increased weight of the larger tires & wheels. The differential skidplate, additional strut bar, and 1/4" thick steel crossmembers create a subframe that is bulletproof. The CNC machined ductile iron steering knuckles ensure proper steering geometry as well as reduce installation time compared to a drop bracket system. The rear is completed with new coil springs, track bar bracket, and adjustable upper arms to correct the pinion angle. By far the most complete system on the market for the money! QUICK SPECS Skill Level: 3 of 5 Estimated install time: 8 hrs Max tire size: 33 x 12.50, 34 x 12.50, 35 x 12.50 Wheel size: 33” Tire: 17 x 9 w/ 4.5" Backspacing 34” Tire: 18 x 9 w/ 5" Backspacing 35” Tire: 20 x 9 w/ 5.75" Backspacing NOTES (C6) 1. All wheel drive models require driveline modification. 2. Will not fit vehicles equipped with Auto-Ride. 3. This is for new body style 2007 only. Will not fit classic models. 4. Strut compressor required for installation. 5. Frame bracket modification and minor welding required. 6. Minor premature engagement of the Stabilitrack system may occur during certain maneuvers. 7. To reduce trimming, 20" wheels with 5.5"-5.75" backspacing recommended. 8. Will not fit 2009-11 two mode hybrid models with electric power steering (EPS). Includes new coil over struts valved for larger tires. This means improved handling and ride quality compared to spacer kits on the market. C6 OPTIONAL ACCESSORIES C5651 C2310 Front Skidplate GM Upper Control Arm Kit $59.95 $395.95 4” COMBO KIT (2007-2010 - EXCLUDING AVALANCHE) Kit# C1400 $379.95 n Maintains factory ride. n Front bumper is relocated for factory look. n Grade 10.9 body bolts included. n No strut compressor required for installation. QUICK SPECS 1.5” BODY LIFT KIT (07-13 AVALANCHE ONLY) ZONEOFFROAD.COM Kit# C9156 $149.95 30 Skill Level: 3 of 5 Estimated install time: 6-8 hrs Max tire size: 33 x 11.50 Wheel size:Stock nClass 10.9 body mount hardware nCrush-proof reinforce nylon body lift blocks nFront and rear bumper relocation nDetailed installation instructions OPTIONAL ACCESSORIES QUICK SPECS NOTES (C9251) 1. This is for new body style 2007 only. Will not fit classic models. 2. Bumper Brackets will not fit Avalanche models. 3. Autoride equipped vehicles will need the ride height sensor linkage to be lengthened. Skill Level: 3 of 5 Estimated install time: 4 hrs 6.5” Lift Kit - 35” Toyo AT2 - 20” V-Tec Wheels 4719 7719 Rear Shock (2 req'd)$34.68 Rear Nitro Shock (2 req'd)$41.50 2" LEVELING KIT Kit# C1200 $69.95 Tired of the front of your truck being lower than the rear? This 2" strut spacer lift is the answer. This spacer kit is easy to install and no strut compressor or disassembly of the strut is required. These are made from Polyphthalamide which is a thermoplastic synthetic resin commonly used to replace metals in automotive applications. These have been specifically engineered and molded to take some of the sheer load off the strut mounting bolts for a durable assembly. These strut spacers will level your truck while still maintaining the factory ride quality. Lower strut spacers provide the easiest install of any leveling kit on the market. No strut removal or disassembly is required. QUICK SPECS Skill Level: 2 of 5 Estimated install time: 1 hr Max tire size: 285/70R17 or 285/55R20 Wheel size: Stock 2" BODY LIFT (2007-2010) CHEVROLET/GMC 2007-2014 1500 SUBURBAN, TAHOE, YUKON, YUKON XL 2WD/4WD Kit# C9251 $319.99 n Class 10.9 Body Mount Bolts n Front and Rear Bumper Relocation Brackets n Front Tow Hooks Retained QUICK SPECS Skill Level: 3 of 5 Estimated install time: 5-6 hrs NOTES (C9251) 1. This is for new body style 2007 only. Will not fit classic models. 2. This body lift will not fit Avalanche models due to differences in the rear bumper. UPPER CONTROL ARM KIT (2007-2013) Kit# C2310 $395.95 NOTES (C2310) 1. Includes a pair (2) of upper control arms n Excellent replacement for light duty factory control arms n Offers more “droop” travel when used with properly designed leveling and 4”-6” suspension lifts n UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stores when needed many miles down the road. - Raybestos #500-1103B n Include optional weld-on steering stops n Fully welded 1/8” plate steel construction n CNC machined ball joint mounts 888-998-ZONE 2” Leveling Kit - 33x12.50 Nitto A/T on 20s 31 CHEVROLET/GMC 2000-2006 1500 AVALANCHE, SUBURBAN, TAHOE, YUKON 4WD 6" SUSPENSION SYSTEM 6" Knuckle/ 6" Rear Spring Kit # C7 $1,679.95 or Kit # C7N $1,707.23 1 1 1 2 2 C2613 C2614 C2615 4602 4759 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Front Shock Rear Shock (2) (2) 7602 7759 Front Nitro Shock Rear Nitro Shock The Zone Offroad suspension system for the Chevy and GM SUV’s is designed for an everyday driver, but built to handle offroad abuse. The lower control arm crossmembers match the factory geometry and appearance. Combined with the CNC machined steering knuckles, the critical components are relocated to factory specs creating a true factory quality driving experience. The differential skid plate combined with the compression struts for added frame support creates an extremely solid system. The rear is lifted with new coil springs, with a track bar bracket and sway bar links included. If you’ve been shopping for the best deal on a lift, look no further. RECOMMENDED ACCESSORIES 3100 Steering Stabilizer $73.35 7100 Steering Stabilizer (Black) $79.35 QUICK SPECS Skill Level: 3 of 5 Estimated install time: 8 hrs Max tire size: 33x12.50, 34x12.50, 35x12.50 Wheel size: 33” Tire: 16 or 17x8 w/ 4.5” Backspacing 34” Tire: 18x9 w/ 5” Backspacing 35” Tire: 20x9 w/ 5.75” Backspacing 2" TORSION BAR KEYS Kit# C1201 $99.95 Zone Offroad torsion bar keys are made in the USA and are 100% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent 2" of lift with the adjustment bolts in the factory location. Optional, custom valved shocks available. ZONEOFFROAD.COM QUICK SPECS Skill Level: 2 of 5 Estimated install time: 1 hr Max tire size: 285/70 Wheel size: Stock NOTES (C7) 1. Will not fit vehicles equipped with Auto-Ride 2. Not recommended for all wheel drive (AWD) models 3. Torsion bar tool required for installation. 4. Frame bracket modification and minor welding required. 5. If equipped with factory 17” wheels, then they must be replaced with 17” or larger aftermarket wheels. 6. Stock tires & wheels can be installed back on the vehicle, but larger tires cannot be installed on factory wheels. NOTES (C1201) 1. Torsion Bar unloading/loading tool required 2. Optional shocks will not fit 1999 old body style trucks, use 88-98 listing. C1201 OPTIONAL ACCESSORIES 4612 4719 7612 7719 3100 7100 Front Shock (2 req’d) Rear Shock (2 req'd) Front Nitro Shock Rear Nitro Shock Steering Stabilizer Steering Stabilizer (Black) 2000-2005 1500 SUBURBAN, TAHOE, YUKON 2WD/4WD 3” BODY LIFT Kit# C9315 $339.95 QUICK SPECS Skill Level: 3 of 5 Estimated install time: 6-8 hr OPTIONAL ACCESSORIES C9806 Manual Transmission Shifter Extension $15.95 NOTES (C9315) 1. Rear bumper brackets are for appearance only. The rear bumper cannot be used for towing after installation. 2. Manual transmission models require shifter extension part # 9806 3. This kit fits 1/2 ton (1500) models only. 32 n CAD designed ¼" thick crossmembers and differential skidplate fit and look like factory for a clean look. n Compression struts included for a solid subframe C9315 $34.68 $34.68 $41.50 $41.50 $73.35 $79.35 6" DROP BRACKET SYSTEM 6" Drop Bracket / 5" Rear Block 1 Kit # C14 1 $1,195.95 1 1 2 2 or C2640 C2641 C2642 C2649 4600 4609 Box Kit 1 of 3 Box Kit 2 of 3 Box Kit 3 of 3 Rear Box Kit Front Shock Rear Shock Kit # C14N $1,223.23 7600 7609 Front Nitro Shock Rear Nitro Shock 2 2 QUICK SPECS Photo shows kit with Nitro shocks upgrade Introducing the latest addition to the Zone Offroad line of Chevy and GMC products, our 88-98 K1500 6” Suspension System incorporates a completely new and improved design compared to the other bracket style kits on the market. Zone Offroad took a different approach with this kit by utilizing 1-piece upper control arm drop brackets to correct the ball joint geometry and maintain the use of your factory steering knuckles. A few of the advantages to this setup are no track width change and factory wheels can be re-used with 35x12.50 tires. Like our other systems, the kit comes with stout main crossmembers and differential drop brackets to re-align the CV shafts and driveshaft while maintaining a clean look. Make your truck stand out from the rest with our new 6” lift engineered with not only affordability, but the quality many have come to expect from Zone Offroad Products. Skill Level: 4 of 5 Estimated Install Time: 8 hrs Max Tire Size: 35x12.50 Wheel Size: Factory and larger diameter Back Spacing: Factory or less backspacing OPTIONAL ACCESSORIES 3104 Single Steering Stabilizer$57.49 CHEVROLET/GMC 1992-1998 BLAZER, TAHOE, YUKON, SUBURBAN 1500 4WD NOTES (C14) 1. Torsion bar un-loading tool required 2. Not designed for 4 door model Tahoe and Yukon 3. Requires exhaust modification to clear the front driveshaft 4. Requires frame bracket modification and differential mount modification 5. Models equipped with auto-trac may require a new front driveshaft. The auto-trac (New Process 246) transfer case can be identified by the badge on the rear of the transfer case that reads “NP246”. In addition, the dash mounted display will show the Auto 4WD symbol. (NP243 is not auto-trac) 2" TORSION BAR KEYS Kit# C1201 1992-1998 $99.95 2" LIFT KIT Kit# C1211 1992-1998 $149.95 C1211 OPTIONAL ACCESSORIES (C1201 & C1211) 4601 4608 7601 7608 Front Shock (2 req'd) Rear Shock (2 req'd) Front Nitro Shock (2 req'd) Rear Nitro Shock (2 req'd) $34.68 $34.68 $41.50 $41.50 3” BODY LIFT Kit# C9317 1992-1994 $199.95 Kit# C9316 1995-1998 $199.95 n n n n n Class 10.9 Body Mount Bolts Are Included Front and Rear Bumper Relocation Steering Extension Included Radiator Relocation Brackets Included No Welding Required OPTIONAL ACCESSORIES (C9317 & C9316) C9919 C9316 Rear Bumper Relocation Bracket Kit $99.95 NOTES (C9317 & C9316) 1. Optional rear bumper brackets are for appearances only. The rear bumper cannot be used for towing after installation. 2. The rear bumper brackets will not fit 2 door models without modification. 3. Will not fit diesel applications. 888-998-ZONE NOTES (C1201 & C1211) 1. Torsion bar unloading tool required for installation. 33 CHEVROLET/GMC ZONEOFFROAD.COM 1998-2004 S10/S15 BLAZER, JIMMY 2WD/4WD 1998-2004 S10/S15 PICKUP 2WD/4WD Kit# C9211 $207.95 Kit# C9202 $176.95 Kit# C9201 $207.95 2" BODY LIFTS Complete 2” body lift to properly lift your S10/S15, Kits Include: n 2’’ crushproof body mount spacers and grade 10.9 hardware n Front bumper relocation brackets n Rear bumper relocation brackets n Fuel filler hose extension n Radiator relocation brackets. QUICK SPECS Installation skill level: 3 of 5 Estimated install time: 10 hrs Max tire size: 30x9.50 NOTES (C9211/C9201/C9202) 1. The rear bumper relocation system is for appearance only. The rear bumper cannot be used for towing. 2. Vehicles equipped with vortec V6 will require modification of the air intake. 3. Will fit ZR2 models. 4. The 1994 models will require steering extension part # C9807. Jobber: $18.95. 5. (C9201) Rear bumper brackets will not fit stepside bed models. 2002-2009 TRAILBLAZER/ENVOY (INCLUDING XL) 4WD 4.2 LITER 2" BODY LIFT Kit# C9212 $368.46 This 2” body lift is perfect to add that little extra tire clearance that you need. The system relocates the front and rear bumpers to maintain a factory look. Grade 10.9 body bolts are included along with Zone Offroad’s Crush-Proof body blocks. QUICK SPECS Installation skill level: 3 of 5 Estimated install time: 4 to 6 hrs NOTES (C9212) 1. System fits 4.2 Liter only 2. Minor frame rail modification required for bumper relocation system. C9212 34 1994-1997 S10/S15 PICKUP 2WD/4WD 6” SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C19 1977-87 Kit # C20 1973-76 $599.95 2 (1) (1) 1 2 2 C0601 C1401 C1402 C6158 4652 4639 Front Leaf Spring 77-87 Box Kit 1 of 1 or 73-76 Box Kit 1 of 1 Add-a-leaf Kit Front Shock Rear Shock (2) (2) 7652 7639 Front Nitro Shock Rear Nitro Shock or Kit # C19N 1977-87 Kit # C20N 1973-76 $627.23 6” OPTIONAL ACCESSORIES C5401 C5001 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle 1” Transfer Case Drop Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $28.59 $46.95 $51.95 $34.68 ea. $41.50 ea. This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block and an add-a-leaf. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. QUICK SPECS KIT NOTES (C19/C20) 1. Some models may require the transfer case drop kit C5001 listed in the accessories to alleviate driveshaft vibration. 2. The front driveshaft may be to be clearanced at the double cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4. Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” Skill Level: 3 of 5 Estimated install time: 4 hrs Max tire size: 37x12.50 Wheel size: 15x8 w/ 3.5” Backspacing CHEVROLET/GMC 1973-1987 1500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 4” SUSPENSION SYSTEM 4” OPTIONAL ACCESSORIES C5401 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $46.95 $51.95 $34.68 ea. $41.50 ea. 4" Front Leaf Springs / 4" Rear Blocks Kit # C10 1977-87 Kit # C11 1973-76 $499.95 or 2 (1) (1) 2 2 C0401 C1401 C1402 4610 4639 Front Leaf Spring 77-87 Box Kit 1 of 1 or 73-76 Box Kit 1 of 1 Front Shock Rear Shock Kit # C10N 1977-87 Kit # C11N 1973-76 $527.23 (2) (2) 7610 7639 Front Nitro Shock Rear Nitro Shock This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block and an add-a-leaf. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. KIT NOTES (C10/C11) 1. “Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. If you prefer to retain the Auxiliary shocks, you must order the optional Auxiliary shocks offered under the Optional Accessories sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” QUICK SPECS Skill Level: 3 of 5 Estimated install time: 3-4 hrs Max tire size: 35x12.50 Wheel size: 15x8 w/ 3.5” Backspacing 888-998-ZONE 4” Lift Kit - 35x12.50 Mastercrafts - 15x10 ARs 35 CHEVROLET/GMC 1973-1987 2500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 6” SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C22 1977-87 Kit # C23 1973-76 $599.95 2 (1) (1) 1 2 2 C0601 C1411 C1412 C6158 4652 4639 Front Leaf Spring 77-87 Box Kit 1 of 1 or 73-76 Box Kit 1 of 1 Add-a-leaf Kit Front Shock Rear Shock (2) (2) 7652 7639 Front Nitro Shock Rear Nitro Shock or Kit # C22N 1977-87 Kit # C23N 1973-76 $627.23 This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block and an add-a-leaf. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. QUICK SPECS Skill Level: 3 of 5 Estimated install time: 4 hrs Max tire size: 37x12.50 Wheel size: 15x8 w/ 3.5” Backspacing 6” OPTIONAL ACCESSORIES C5401 C5001 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle 1” Transfer Case Drop Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $28.59 $46.95 $51.95 $34.68 ea. $41.50 ea. KIT NOTES (C22/C23) 1. Some models may require the transfer case drop kit C5001 listed in the accessories to alleviate driveshaft vibration. 2. The front driveshaft may be to be clearanced at the double cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4.Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” 4” SUSPENSION SYSTEM 4" Front Leaf Springs / 4" Rear Blocks Kit # C16 1977-87 Kit # C17 1973-76 $499.95 or Kit # C16N 1977-87 Kit # C17N 1973-76 $527.23 2 (1) (1) 2 2 C0401 C1411 C1412 4610 4639 Front Leaf Spring 77-87 Box Kit 1 of 1 or 73-76 Box Kit 1 of 1 Front Shock Rear Shock (2) (2) 7610 7639 Front Nitro Shock Rear Nitro Shock This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 4” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. ZONEOFFROAD.COM QUICK SPECS 36 Skill Level: 3 of 5 Estimated install time: 3-4 hrs Max tire size: 35x12.50 Wheel size: 15x8 w/ 3.5” Backspacing 4” OPTIONAL ACCESSORIES C5401 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $46.95 $51.95 $34.68 ea. $41.50 ea. KIT NOTES (C16/C17) 1. “Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. If you prefer to retain the Auxiliary shocks, you must order the optional Auxiliary shocks offered under the Optional Accessories sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” 6” Lift Kit - 37x12.50 MTZs - 17x9 XD Addicts 6” SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C21 $599.95 or Kit # C21N $627.23 6” OPTIONAL ACCESSORIES C5401 C5001 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle 1” Transfer Case Drop Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $28.59 $46.95 $51.95 $34.68 ea. $41.50 ea. 2 1 1 2 2 C0601 C1403 C6158 4652 4639 Front Leaf Spring Box Kit Add-a-leaf Kit Front Shock Rear Shock (2) (2) 7652 7639 Front Nitro Shock Rear Nitro Shock This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block and an add-a-leaf. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. QUICK SPECS Skill Level: 3 of 5 Estimated install time: 4 hrs Max tire size: 37x12.50 Wheel size: 15x8 w/ 3.5” Backspacing KIT NOTES (C21) 1. Some models may require the transfer case drop kit C5001 listed in the accessories to alleviate driveshaft vibration. 2. The front driveshaft may be to be clearanced at the double Cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4. “Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. If you prefer to retain the Auxiliary shocks, you must order the optional Auxiliary shocks offered under the Optional Accessories sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” CHEVROLET/GMC 1988-1991 1500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 4” SUSPENSION SYSTEM 4” OPTIONAL ACCESSORIES C5401 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $46.95 $51.95 $34.68 ea. $41.50 ea. 4" Front Leaf Springs / 4" Rear Blocks Kit # C15 $499.95 or 2 1 2 2 C0401 C1403 4610 4639 Front Leaf Spring Box Kit Front Shock Rear Shock Kit # C15N $527.23 (2) (2) 7610 7639 Front Nitro Shock Rear Nitro Shock This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 4” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. QUICK SPECS KIT NOTES (C15) 1. “Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. If you prefer to retain the Auxiliary shocks, you must order the optional Auxiliary shocks offered under the Optional Accessories sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” Skill Level: 3 of 5 Estimated install time: 3-4 hrs Max tire size: 35x12.50 Wheel size: 15x8 w/ 3.5” Backspacing 888-998-ZONE 4” Lift Kit - 33x12.50 BFG A/T - 15x10 ARs 37 CHEVROLET/GMC 1988-1991 2500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 6” SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C24 $599.95 or Kit # C24N $627.23 2 1 1 2 2 C0601 C1413 C6158 4652 4639 Front Leaf Spring Box Kit Add-a-leaf Kit Front Shock Rear Shock (2) (2) 7652 7639 Front Nitro Shock Rear Nitro Shock This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block and an add-a-leaf. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. QUICK SPECS Skill Level: 3 of 5 Estimated install time: 4 hrs Max tire size: 37x12.50 Wheel size: 15x8 w/ 3.5” Backspacing 6” OPTIONAL ACCESSORIES C5401 C5001 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle 1” Transfer Case Drop Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $28.59 $46.95 $51.95 $34.68 ea. $41.50 ea. KIT NOTES (C24) 1. Some models may require the transfer case drop kit C5001 listed in the accessories to alleviate driveshaft vibration. 2. The front driveshaft may be to be clearanced at the double Cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4. “Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. If you prefer to retain the Auxiliary shocks, you must order the optional Auxiliary shocks offered under the Optional Accessories sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” 4” SUSPENSION SYSTEM 4" Front Leaf Springs / 4" Rear Blocks Kit # C18 $499.95 or Kit # C18N $527.23 2 1 2 2 C0401 C1413 4610 4639 Front Leaf Spring Box Kit Front Shock Rear Shock (2) (2) 7610 7639 Front Nitro Shock Rear Nitro Shock This system comes complete with a 4” steering arm to yield the factory drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 4” leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4” block. If your truck came with a front sway bar, check out the accessories for a unique shackle sway bar link design that fits lifts from 2-6”. ZONEOFFROAD.COM QUICK SPECS 38 Skill Level: 3 of 5 Estimated install time: 3-4 hrs Max tire size: 35x12.50 Wheel size: 15x8 w/ 3.5” Backspacing 4” OPTIONAL ACCESSORIES C5401 3101 7101 4652 7652 Front Sway Bar Shackle Link Kit 2.5” eye-to-eye/Shackle Single Steering Stabilizer Single Steering Stabilizer (Black) Auxiliary Front Hydro Shocks (2reqd) Auxiliary Front Nitro Shocks (2reqd) $46.95 $46.95 $51.95 $34.68 ea. $41.50 ea. KIT NOTES (C18) 1. “Some models came equipped from the factory with a dual front shock setup, with the second set of shocks commonly being referred to as “Auxiliary” shocks. If you prefer to retain the Auxiliary shocks, you must order the optional Auxiliary shocks offered under the Optional Accessories sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks.” 6’’ Lift Kit - 37” Nitto M/T Tires - 17’’ Method Race Wheels 2005-2010 HUMMER H3/H3T 4WD 2" LEVELING KIT Kit# C1215 $99.95 n 100% resonant frequency tested to ensure a solid casting. n CNC Machined to ensure the proper amount of lift for your vehicle. n Made in the U.S.A. n Easy installation n Includes front shock spacers to re-gain wheel travel. CHEVROLET/GMC HUMMER QUICK SPECS Installation Skill Level: 1 of 5 Estimated install time: 2 hr Max tire size: 33x12.50R16 Wheel size: Stock Backspacing: Stock OPTIONAL ACCESSORIES 4612 Front Shock (2 req’d) 7612 Front Nitro Shock (2 req’d) $34.68 $41.50 888-998-ZONE 2” Leveling Kit - 33” Bridgestones - 18x9 Eagle 178s 39