CHAINSAW PROTECTIVE CLOTHING - Construction Safety Products

Transcription

logging supplies & equipment
chainsaw protective clothing
chaps
Elvex ProChaps™ - 90 Series
• Patented asymmetric design provides extended protection on the left side of each leg, where most injuries occur
• The 90 series chaps conform to ASTM requirements as well as APA Class A requirements
• Lightweight, flexible and strong 420 denier Nylon cover fabric
• Easy on, easy off apron-style design
• Quick release buckles for waist and legs
• A zippered front pocket is standard
JE-9028
JE-9033
JE-9036
JE-9039
28” Length......................................................... $69.95 each
33” Length......................................................... $69.95 each
36” Length......................................................... $69.95 each
39” Length......................................................... $74.95 each
Elvex ProChaps™ - 94 Series
• Designed for the professional chain saw user.
• Meets the requirements of the ASTM Standard.
• Lightweight Prolar protective pads add comfort and prevent heat buildup.
• Patented asymmetric design
• 1,000 denier Cordura Nylon cover fabric is more abrasive resistant.
• Three sets of leg straps and buckles help the stiffer cover fabric conform comfortably to the legs.
• A zippered front pocket is standard.
JE-9428
JE-9433
JE-9436
JE-9439
28” Length......................................................... $84.95 each
33” Length......................................................... $84.95 each
36” Length......................................................... $84.95 each
39” Length......................................................... $88.95 each
Elvex ProChaps™ - 91 Series w/ Calf
Protection
• Certain work conditions may require extra precaution, with regards to lower leg protection. Elvex ProChaps with wrap-around calf protection provides the solution for these situations.
• This model maintains all basic features of Elvex 94 series chaps, while maximizing lower leg protection
• The outer shell is made of 1,000 denier Cordura Nylon, designed for durability in severe environments.
• Each leg is secured by a total of three sets of buckles. The wrap-around section, below the knees, is secured by two sets of buckles.
JE-9133
JE-9136
JE-9139
33” Length......................................................... $88.95 each
36” Length......................................................... $88.95 each
39” Length......................................................... $92.95 each
ArborChaps™ One Size Fits All
• Patented asymmetric design for better protection where most injuries occur.
• Elvex famous Prolar protective pads, no compromise on safety
• Universal size, three sets of belt loops allow length adjustment from 33 to 36 inches.
• Easy on, easy off apron style design, with two sets of leg straps and buckles
• Hunter green 420 denier Nylon cover fabric, with attractive black Nylon edging
• Available in one universal size only
JE-8000
Universal Length................................................ $66.95 each
replacement Parts
Labonville Kevlar Chaps
• Adjustable straps and buckles
• Full wrap 6-ply Kevlar
• Kevlar fibers running top to bottom
green
850KPR-G
850KPL-G
850KPX-G
850KP2X-G
Regular - 32” Length..................................... $74.95 each
Long - 36” Length......................................... $84.95 each
X-Long - 40” Length...................................... $89.95 each
2X-Long- 44” Length..................................... $92.95 each
orange
850KPR-O
850KPL-O
850KPX-O
850KP2X-O
Regular - 32” Length.....................................$74.95 each
Long - 36” Length.........................................$84.95 each
X-Long - 40” Length......................................$89.95 each
2X-Long- 44” Length.....................................$92.95 each
JE-BL
JE-BW
Leg Buckles..........................................................$1.50 each
Waist Buckles......................................................$1.95 each
Labonville Full-Wrap Chainsaw Chaps
• 6-ply Kevlar polyester blend
• Meets all OSHA requirements and are UL
Class A classified.
• Outer shell is a 1000 denier Cordura and is proven to be very resistant to snags and tears in the brush.
• Adjustable waist band
• Made in the USA.
W850KPR
W850KPL
W850KPX
W850KP2X
W850KP3X
Regular - 32” Length.....................................$65.95 each
Long - 36” Length.........................................$71.95 each
X-Long - 40” Length......................................$73.95 each
416 For Orders: Phone 1.800.592.6940 / Fax 318.688.6487 / www.cspcatalog.com
PGI has been a leader in product
development for the protective clothing industry for over 60
years. They constantly strive to improve and expand their
technical knowledge, products and services.
PGI, Inc. is registered as an ISO 9001: 2008 Company. The
main purpose of ISO 9001 (International Organization for
Standardization) is to develop and promote common quality
assurance and quality management standards worldwide.
This ensures that they consistently produce the same high
quality product to the consumer. Because PGI’s entire facility
is registered to ISO 9001, everything you purchase will carry a
guarantee of total quality assurance.
“Sawbuck” Wildland Forestry Chaps
UL Classified, 5 Ply Chainsaw Chaps. Constructed with 3 ply’s of
woven para-aramid and 2 ply’s of para-aramid felt. Shell front
and back, made of 1000 denier Cordura nylon, with a urethane
coating to prevent penetration of liquids. Chaps feature a 2”
wide waist belt and 1” wide leg straps, made of heavy nylon
webbing with adjustable quick release nylon buckles. A four
compartment tool pocket with a snap closure flap is sewn into
the waist belt.
Sawbuck Forestry 5 Ply Chainsaw Chaps are UL Classified to
NFPA 1977, Standard on Protective Clothing and Equipment for
Wildland Firefighting, ASTM F 1897-08 Standard Specification
for Leg Protection for Chain Saw users. This Chainsaw Chap is
built in accordance with U.S. Forestry Specification 6170-4F.
safety green
WFG-32
WFG-36
WFG-40
32” Length....................................................... $132.95 each
4+.................................................................... $128.95 each
36” Length....................................................... $139.95 each
4+.................................................................... $135.95 each
40” Length....................................................... $148.95 each
4+.................................................................... $144.95 each
safety orange
WFO-32
WFO-36
WFO-40
32” Length....................................................... $132.95 each
4+.................................................................... $128.95 each
36” Length....................................................... $139.95 each
4+.................................................................... $135.95 each
40” Length....................................................... $148.95 each
4+.................................................................... $144.95 each
• Protection – 50% more protection than ballistic Nylon chaps
• Comfort – Light weight (chaps weigh approx. 2 lbs.),
• Durable – Cordura® Nylon outer shell has 5x the abrasion resistance of cotton and has polyurethane coating for oil and water resistance. Edges bound with strong Nylon binding
• Quality – Made in accordance with U.S. Forest Service Specification No. 6170-4. All materials and workmanship are thoroughly inspected before any chaps leave the plant.
• Easy Care – Mildew and rot resistant. Quick drying. To clean, wash using scrub brush, warm water and detergent. Stubborn stains may require treating first with a dry cleaning solvent.
safety green
SBG-28
28” Length......................................................... $95.95 each
4+...................................................................... $91.95 each
SBG-32
32” Length....................................................... $102.00 each
4+...................................................................... $99.50 each
SBG-36
36” Length....................................................... $109.95 each
4+.................................................................... $106.75 each
SBG-40
40” Length....................................................... $115.95 each
4+.................................................................... $112.75 each
PGI, Inc. is a manufacturer of flame
resistant and protective clothing for the
Electric Arc, Gas, Utilities, Fire Fighting,
Forestry and Food Service Markets.
“SAW BUCK” Chain Kevlar® Saw Chaps
“SAW BUCK” chain saw chaps offer far greater protection and
comfort than previously attainable with ballistic Nylon chaps.
The difference is the use of a combination of woven Kevlar®
and needle punch Kevlar® fabrics with pound for pound are
5x stronger than steel. U.S. Forest Service tests show that the
combination Kevlar® fabrics used in “SAW BUCK” chaps allow
substantially more reaction time in event of an accident – this
additional time could prevent a serious injury.
safety orange
SBG-28
28” Length......................................................... $95.95 each
4+...................................................................... $91.95 each
SBO-32 32” Length....................................................... $102.00 each
4+...................................................................... $99.50 each
SBO-36 36” Length....................................................... $109.95 each
4+.................................................................... $106.75 each
SBO-40 40” Length....................................................... $115.95 each
4+.................................................................... $112.75 each
replacement Parts
B-L
Leg Buckles..........................................................$0.75 each
B-W
Waist Buckles......................................................$1.95 each
“SAW BUCK” Adjustable Kevlar® Chaps
Four ply para-aramid fabric (two woven and two felt) and are
adjustable in length. To adjust the length of these adjustable
Sawbuck Chainsaw chaps, simply fold over the waist band and
snap to secure a shorter length. Adjustable Sawbuck Chainsaw
Chaps give 180 degrees of coverage across the front of both
legs and an extra four inches of protection along the left side of
both legs. These chaps feature a 1000 denier nylon outer shell
fabric that resists water, mildew, oil, and moisture. Adjustable
Sawbuck Chainsaw Chaps have a 2” wide adjustable waist belt
and 1” wide adjustable leg straps with quick release buckles.
Orange. UL Classified to ASTM F1897-08
* Adjustable Chainsaw Chaps fit waist sizes 32” to 46”. Length is adjustable from 35” to 37”.
PGI-ADJ-CHAPS..................................................................$129.95 each
For Orders: Phone 1.800.592.6940 / Fax 318.688.6487 / www.cspcatalog.com
417
gloves/helmets
swedepro chainsaw glove
• Mitt style gloves for better gripping power while operating a chain saw
• The back of these Chain Saw Gloves are made of water-resistant nylon and the palms are made with goat skin for better wet weather gripping power
• Designed by European Woodworking professionals for the professional logger
• Breakaway Engtex® chain saw retardent material sewn into the back of the left glove
• High Visibility International Orange Color (great for outdoor safety)
• Extended cuff with elongated wrist band and hook and loop fastener keeps hands warm and free from sawdust
250008
250009
2500010
2500011
Small (8)........................................................$29.95 pair
Medium (9)...................................................$29.95 pair
Large (10)......................................................$29.95 pair
X-Large (11)...................................................$29.95 pair
Kevlar Gloves
Yellow knit with PVC Honeygrip® coating
on both sides for improved grip. The
strong Kevlar fibers offer superior cut
protection and resistance to abrasion.
Regular weight – 7 gauge knit.
9370H-S
9370H-L
Small.................................................................... $6.95 pair
12+....................................................................... $6.25 pair
Large.................................................................... $6.95 pair
12+....................................................................... $6.25 pair
Elvex Chainsaw
Pro-Gloves
Elvex Pro-Gloves feature chain saw
protective padding on the back of the left
hand glove to help reduce or prevent
a chain saw accident.
• Certified to CE EN 381-7, Class I test standard.
• Palm material, made from premium grade, soft and durable cowhide leather, making it 3 times more durable
• Cowhide leather provides better gripping
• Protection material is multi-layer high tenacity polyester clogging fibers (left hand only).
• Open cuff in cow suede
• Velcro closure customizes the fit
JEGLV-50-LG
JEGLV-50-XL
Large........................................................ $29.95 pair
X-Large..................................................... $29.95 pair
Elvex ProGuard Logger’s
Head Protection
• Provides protection of head, face and hearing in one integrated system. Meets ANSI, SEI and CSA standards.
ear
Chainsaw
Protective
Clothing •Logging
Dielectric
muffs have
Noise Reduction
Rating of 24 dB, 25 dB or 27 dB.
ProGuard
Head
Protection
•Elvex
The nylon
mesh Logger’s
screen can
be flipped
up Provides
protection
of head,
and hearing
in one integrated system. Meets ANSI
or down
on a spring
loaded
visorface
bracket.
and visor
CSA is
standards.
Standard
6” x 11” nylon mesh.  screen
Dielectric
ear muffs have Noise Reduction Rating of 24 dB, 25 dB or 27 dB.
Steel
is optional.

The nylon mesh screen can be flipped up or down on a spring loaded visor bracket.
Standard visor is 6” x 11” nylon mesh. Steel screen is optional.
Part Number
CU-25
CU-30R
CU-60R
Description
Orange, 6-pt pin lock adjustable
suspension cap, black muff, (24 NRR),
visor bracket, nylon mesh visor
Orange, 6-pt ratchet adjustable
Orange, 6-pt ratchet adjustable
Price
$36.95
$41.95
$44.95
ProGuard Parts
NV-70 Forestry Screen Nylon Mesh $8.25
NV-70
Forestry Screen Nylon Mesh................................$8.25 each
SV-70 Forestry
$8.25
SV-70
ForestryScreen
ScreenSteel
SteelMesh
Mesh.................................$8.25
each
VB-10 Visor
Bracket $8.25
VB-10
Visor Bracket.......................................................$8.25
each
SA-93 Universal
$3.95
SA-93
Universal Adapter
Adapterfor
forSlotted
SlottedCaps
Caps......................$3.95
each
BR93 Replacement
$10.95
BR93
ReplacementEar
EarMuff
MuffBrackets
Brackets.........................
$10.95 each
ProGuard replacement Parts
Elvex ProChaps™
418 For Orders: Phone 1.800.592.6940 / Fax 318.688.6487
90 Series ProChaps™
 Patented asymmetric design provides extended protection on the left side of each leg
where most injuries occur
 The 90 series chaps conform to ASTM requirements as well as APA Class A
requirements
 Lightweight, flexible and strong 420 denier Nylon cover fabric
/ www.cspcatalog.com
 Easy on, easy off apron-style design
 Quick release buckles for waist and legs
SwedePro™ Chainsaw Protective Boots
• Lined with soft cowhide gloved
leather
• Full top grain leather over entire upper
• Proven with 7 years of field testing by Soren Eriksson
• Multi-layers of specially woven Kevlar®
• High 10” designed to give maximum ankle support
• Triple stitched for longer wear
• Specially designed lace to toe style for rugged outdoors use
• Meets ANSI standard Z41PT83 for steel toes
• Available with high abrasion “Vibram® Marathon® and Calk soles (Spiked)
• 3” steel shank for extra support
• Goodyear® Welt construction
• Paron 4000® Cushion insole material
305070
305080
305085
305090
305095
305000
305005
305010
305015
305012
305013
Size 7..........................................................$259.00 each
Size 8..........................................................$259.00 each
Size 8.5.......................................................$259.00 each
Size 9..........................................................$259.00 each
Size 9.5.......................................................$259.00 each
Size 10........................................................$259.00 each
Size 10.5.....................................................$259.00 each
Size 11........................................................$259.00 each
Size 11.5.....................................................$259.00 each
Size 12........................................................$259.00 each
Size 13........................................................$259.00 each
Labonville Kevlar Chainsaw Boots
This 8” low heel, 2 layer, Kevlar/Poly
Chainsaw safety Redwood boot has a
padded collar, top grained oiled leather,
rivet reinforced, and a safety freedom box
toe with scuff resistant black smooth tip. It
is Cambrelle lined, foam lined, with speed
lace grommets (machined brass studs).
Other features include: Matterhorn 1 pc.
Lug sole; heel-to-heel steel shank, full
cushion, Paron 4000 insole new security
stitched soles for extra durability, comfort insole, rear pull loop.
EH rated (Electrical Hazard Protection). Made in the USA.
Elvex ProVest™
Elvex ProVest is the first genuine chain
saw resistant upper body protection. It
is intended to offer limited protection
from chain saw kick back injuries.
Great for arborists, landscapers and
utility company employees.
• Patented prolar protection is provided on the shoulders and the front of the chest. The water resistant sleeveless jacket has extended shoulders and large front and back vents. A longer back panel helps repel water and debris.
• High visibility orange top with blue bottom makes an attractive
looking product. The vest is made from 420 denier Nylon with an inside zippered pocket
JE-50M
JE-50L
JE-50XL
JE-50XXL
Medium, 38” – 40”.......................................$69.95 each
Large, 42” – 44”............................................$69.95 each
X Large, 46” – 48”.........................................$69.95 each
2X Large, 50” – 52”.......................................$73.95 each
SwedePro Chainsaw Protective Shirt
The top of the SwedePro Chainsaw Protective Shirt is made with breathable
Polyester material for flexibility and
the body is made with Polyester mesh
for breathability and comfort. The
protective pad is made with Engtex®
material. It also has protective material
sewn into the sleeve, collar and shoulder
areas. High visibility international orange color for safety.
170030
170034
170038
170042
170044
170048
boots/shirts
Small..................................................................$85.00 each
Medium.............................................................$85.00 each
Large..................................................................$85.00 each
X-Large...............................................................$85.00 each
2X-Large.............................................................$85.00 each
3X-Large.............................................................$85.00 each
Available Sizes:
7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 12, 13. (EE Width Only.)
24127-SZ........................................................................... $190.95 pair
Labonville Kevlar Chainsaw Boots
-high heel style
Same as above – new “Pole Climber” right and left steel shanks.
24128-SZ........................................................................... $207.95 pair
call our friendly and
knowledgeable sales consultants
for answers to any questions you
may have:
1-800-592-6940
419
420
chainsaw chain
Oregon Chain Saw Chain – By The Roll
• 100 ft. Rolls
• 3/8” Pitch
• .050” Gauge
$329.95 per roll
72LP Round-ground Chisel Cutters, (Standard Sequence)
72LG Round-ground Chisel Cutters, (Standard Sequence)
72JG Round-ground Chisel Cutters, (Skip Sequence)
72LG
72LP
Also Available:
91VG-100R
3/8” Chamfer Chisel (XtraGuard®).......... $319.95 each
• Low kickback, low vibration, new angular cutting corner
• Great choice for homeowners, arborists and utility workers
• Gauge: .050
Tie Straps & Presets for 3/8”, .050 Ga. Chain
P23910 Presets, pack of 25.................................................... $13.95
P23837  Tie
Straps,
pack of&25.
.................................................. $9.95
Logging
Logging
Supplies
Equipment
Oregon Cut Chain Loops for Stihl & Husky
Stock Number DL
Bar (Husky)
Length
1-9
72LP-68E
68 18”
$17.00
72LP-84E
84
24”
$21.00
72LP-72E
72
Stock Number Size
DL20” Pitch $18.00
Gauge
72LP-66E
66
72LP-70E
20” 18”
70 (Stihl)
3/8 $16.50
.050
72LP-60E
60
72LG-72E
20”
7216” 3/8 $15.00
.050
72LP-68E
68
90SG-44E
12” 18”
44(Husky)
3/8 $17.00
.043
91VS-44DL
12”
44
3/8
.050
Stock Number Size
DL
91VS-52E
14”
52 Pitch
3/8 Gauge
.050
72LP-70E
20”
70
3/8
.050
Pocket
Chain
Breaker
72LG-72E
20”
72
3/8
.050
12” Bar
44 Length
3/8& Number
.043
•90SG-44E
Easy to
use
Stock
Number
DL
12”
44
3/8
.050 •91VS-44DL
Breaks
1/4”,
.325”,
3/8”,
.404”
and
1/2”
91VG-47E
45
12” (120LAXA041)
14”
52
3/8
.050
91VS-52E
pitch chains 52
91VG-52E
14” (140LAXA041)
10-29
$14.95
$18.50
$15.85
1-9
$14.55
$17.50
$13.20
$18.00
$14.95
$12.95
$12.95
1-9
$13.25
$17.50
$18.00
$12.95
1-3
$12.95
$10.00
$13.25
$11.40
30+
$13.60
$16.80
$14.40
10+
$13.20
$15.50
$12.00
$15.85
$13.60
$11.95
$11.95
10+
$12.25
$15.50
$15.85
$11.95
4+
$11.95
$9.25
$12.25
$10.65
58
16” (160LAXA041)
$12.50
$11.95
•91VG-58E
Anvil sold separately.
91VG-55EPocket Chain
55 Breaker
16” (160LAXA041)
$12.50$12.95
$11.50
CB1000
w/ Punch.........................
each
Stock Number
DL
Bar
Length
&Breaker......................$6.95
Number
1-3
4+
91VG-56E
56 Anvil
16”
(160LAXA041)
$12.75
$11.75
EFFL-21
Adjustable
for
Chain
each
91VG-47E
45
12”
$10.00
$9.25
91VG-62E
62
16” (120LAXA041)
(160LAXA041)
$12.95
$11.95
91VG-52E
52
14” (140LAXA041)
$11.40
$10.65
91VG-58E ChainSaw
58
16” (160LAXA041)
$12.50
$11.95
Oregon
Files
91VG-55E
55
16”
(160LAXA041)
$12.50
$11.50
Stock Number
Size
1-5 Dozen 6+ Dozen
91VG-56E
56 mm 16”$15.95
(160LAXA041)
$11.75
70502
4.5
$14.95 $12.75
91VG-62E
62
(160LAXA041)
$11.95
70503
3/16” 16”$15.95
$14.95 $12.95
70504
5/32”
$15.95
$14.95
70505
13/64”
$15.95
$14.95
Stock
Size
1-5
Dozen 6+$14.95
Dozen
70511Number
7/32”
$15.95
70502
4.5 mm
$15.95
$14.95
70503
3/16”
$15.95
$14.95
CSP
Files
70504
5/32”
$15.95
StockBrand
Number Chainsaw
Size
1-5
Dozen
6+$14.95
Dozen
70505
13/64”
$15.95
$14.95
7/32”
$9.25
$8.25
•732-CSP
High quality, Swiss
made files
70511
7/32”
$15.95
$14.95
316-CSP
3/16”
$9.25
$8.25
• Same pattern as Oregon Chain Saw Files
5/32”
$8.25
•532-CSP
Packed one dozen
per box $9.25
1364-CSP
13/64”
$9.25
$8.25
Stock Number
Size
1-5 Dozen 6+ Dozen
732-CSP
7/32”
$9.25
$8.25
316-CSP
Model Number 3/16”
Saw Brand$9.25
Length $8.25
DL
1-2
3-5
532-CSP
5/32”
$8.25
160ATMD025
Stihl $9.2516”
60
$43.50
$42.05
1364-CSP
13/64”
$8.25
180ATMD025
Stihl $9.2518”
66
$45.75
$44.10
200ATMD025
Stihl
20”
72
$50.25
$48.50
240ATMD025 Chainsaw
Stihl
24” Handles
84
$56.60
$54.60
wooden
File
Model Number
Saw
Brand Length
DL
1-2
3-5
160ATMD009
Husqvarna
16”
60
$43.50
$42.05
OR-30870
Oregon............................................................$1.40
each
160ATMD025
Stihl
16”
60
$43.50
$42.05
180ATMD009
Husqvarna
18”
68
$45.75
$44.10
180ATMD025
Stihl
18”
66
$45.75
$44.10
200ATMD009
Husqvarna
20”
72
$50.25
$48.50
8mm
Bar Nuts
200ATMD025
Stihl
20”
72
$50.25
$48.50
240ATMD009
Husqvarna
24”
84
$56.60
$54.60
NBM8BN
each
240ATMD025 For Husqvarna...............................................$.60
Stihl
24”
84
$56.60
$54.60
NBM8X34BN
........................................................$.60
each
160ATMD009 For Stihl.
Husqvarna
16”
60
$43.50
$42.05
180ATMD009
Husqvarna
18”
68
$45.75
$44.10
Model Number Saw
Brand Length
DL
1-2
3-5
200ATMD009
Husqvarna
20”
72
$50.25
$48.50
160RNDD025
Stihl
16”
60
$41.50
$40.00
Saw
Wrenches
240ATMD009
Husqvarna
24”
84
$56.60
$54.60
180RNDD025
Stihl
18”
66
$43.65
$42.05
Stock Number
Bar &
Length
10-29
30+
Logging
 LoggingDL
Supplies
Equipment1-9
72LP-84E
84
24”
$21.00
$18.50
$16.80
72LP-72E
72
20”
$18.00
$15.85
$14.40
72LP-66E
66
18” (Stihl)
$16.50
$14.55
$13.20
Stock Number DL Bar Length
1-9
10-29
30+
72LP-60E
60
16”
$15.00
$13.20
$12.00
72LP-84E
84
24”
$21.00
$18.50
$16.80
72LP-68E
68 18” (Husky) $17.00
$14.95
$13.60
72LP-72E
72
20”
$18.00
$15.85
$14.40
*Other
Sizes
Available
72LP-66E
66
18” (Stihl)
$16.50
$14.55
$13.20
Stock Number Size
DL16” Pitch $15.00
Gauge
1-9
10+
72LP-60E
60
$13.20
$12.00
Logging
 Logging20”
Supplies
& Equipment
72LP-70E
70(Husky)
3/8 $17.00
.050
$17.50
72LP-68E
68 18”
$14.95 $15.50
$13.60
72LG-72E chain
20” saw
72 loops
3/8
.050
$18.00
$15.85
Oregon
90SG-44E
12”
44
3/8
.043
$12.95
$11.95
Stock Number Size DL Pitch Gauge
1-9
10+
91VS-44DL
12”
44 Length
3/8
.050
$12.95
$11.95
Stock
Number
DL
Bar
1-9
10-29
30+
72LP-70E
20”
70
3/8
.050
$17.50
$15.50
91VS-52E
14”
52
3/8
.050
$13.25
$12.25
72LP-84E
84
24”
$21.00
$18.50
$16.80
72LG-72E
20”
72
3/8
.050
$18.00
$15.85
72LP-72E
72
$15.85 $11.95
$14.40
90SG-44E
12”
4420” 3/8 $18.00
.043
$12.95
72LP-66E
66
18”
(Stihl)
$16.50
$14.55
$13.20
91VS-44DL
12”
44
3/8
.050
$12.95
$11.95
These economical tools
72LP-60E
60 Bar
$15.00
$13.20
$12.00
Stock Number DL
Length
1-3 $12.25
4+
200RNDD025
Stihl
20”
72
$47.95
$46.25
91VS-52E
14”
5216”
3/8& Number
.050
$13.25
make
bar removal andStihl
72LP-68E
68 18”
(Husky)
$17.00
$14.95
91VG-47E
45
12”
(120LAXA041)
$10.00 $13.60
$9.25
240RNDD025
24”
84
$58.75
$56.65
chain
tensioning
91VG-52E
52
14” (140LAXA041)
$11.40
$10.65
Model
Number easy.
SawStihl
Brand Length
DL
1-2
3-5
280RNDD025
28”
91
$67.65
$65.25
For
Stihl and Husqvarna.
91VG-58E
16” (160LAXA041)
$11.95
Stock Number 58
Size DL
Pitch Gauge ®$12.50
1-9
10+
160RNDD025
Stihl
16”
60
$41.50
$40.00
160RNDD009
Husqvarna
Stock Number
DL
Bar Length
& Number
1-3
4+
oregon
xtraguard
Arborist
CSWR-010
13mm x Husqvarna
16mm,
..................................$3.20
each
91VG-55E
55
16” (160LAXA041)
$12.50 $15.50
$11.50
72LP-70E
20”
70
3/8
.050
$17.50
180RNDD025
Stihl 2” Barrel.
18”
66
$43.65
$42.05
180RNDD009
68
91VG-47E
45
12” (120LAXA041)
$10.00
$9.25
Saw
Chain
Loops
91VG-56E
56
16”
(160LAXA041)
$12.75
$11.75
72LG-72E
20”
72
3/8
.050
$18.00
$15.85
200RNDD025
Stihl
20”
72
$47.95
$46.25
200RNDD009
Husqvarna
14” (140LAXA041)
$11.40
$10.65
•91VG-52E
Low Kickback 52
91VG-62E
62
16” (160LAXA041)
$12.95 $11.95
$11.95
90SG-44E
12”
44
3/8
.043
$12.95
240RNDD025
Stihl
24”
84
$58.75
$56.65
240RNDD009
Husqvarna
58Gauge16” (160LAXA041)
$12.50
$11.95
•91VG-58E
3/8”
Pitch
–
.050
91VS-44DL
12”
44
3/8
.050
$12.95
$11.95
280RNDD025
Stihl
28”
91
$67.65
$65.25
280RNDD009
Husqvarna
Bosch Chainsaw Spark Plugs
91VG-55E
55
16” (160LAXA041)
$12.50
$11.50
91VS-52E
14”
52
3/8
.050
$13.25
$12.25
160RNDD009
Husqvarna
16”
60
$41.50
$40.00
91VG-56E
56
16” (160LAXA041)
$12.75
$11.75
180RNDD009
Husqvarna
18”
68
$43.65
$42.05
Stock
Number
Size
1-5
Dozen
6+
Dozen
91VG-62E
62
16” (160LAXA041)
$12.95
$11.95
200RNDD009
20”
72
$47.95
$46.25
70502
4.5 mm
$15.95
$14.95
Item Number Husqvarna
Length Gauge
Pitch
1-5
6+
240RNDD009
Husqvarna
24”
84
$58.75
$56.65
70503
3/16”
$15.95
$14.95
Stock Number DL
Bar Length & Number
1-3
4+
140GPEA041
14”
.050
3/8
$27.95 $26.95
280RNDD009
Husqvarna
28”
91
$67.65
$65.25
70504
5/32” 12”$15.95
$14.95 $10.00
91VG-47E
45
(120LAXA041)
$9.25
160GPEA041
16”
.050
3/8
$30.50 $29.50
Stock Number
Size
1-5 Dozen 6+ Dozen
70505
13/64”
$14.95 $11.40
91VG-52E
52
14”$15.95
(140LAXA041)
$10.65
200ATMD176
20”
.050
3/8
$50.25 $1.80
$48.50
WS7F
For
Husqvarna
(1-11)..............................................
each
70502
4.5 mm
$15.95
$14.95
70511
7/32” 16”$15.95
$14.95 $12.50
91VG-58E
58
(160LAXA041)
$11.95
200RNDD176
20”
.050
3/8
$47.95 $1.70
$46.25
12+.........................................................................
each
70503
3/16”
$15.95
$14.95
WSR6F
Stihl (1-11)........................................................
each
91VG-55E
55
16” (160LAXA041)
$12.50
$11.50
ItemFor
Number
Length
Gauge
Pitch
1-5 $1.80
6+
280ATMD009
28”
.050
3/8
$66.50
$64.25
70504
5/32”
$15.95
$14.95
12+.........................................................................
each
91VG-56E
56
16” (160LAXA041)
$12.75
$11.75
140GPEA041
14”
.050
3/8
$27.95
$26.95
280ATMD025
28”
$66.50 $1.70
$64.25
70505
13/64”
$15.95
$14.95
91VG-62E
62
16”
(160LAXA041)
$12.95
$11.95
160GPEA041
16”
.050
3/8
$30.50 $29.50
124MLEA074
Stock
Number
Size
1-5
Dozen
6+
Dozen
70511
7/32”
$15.95
$14.95
Stihl
Power Pruner
12”
.043
--$16.50
200ATMD176
20”
.050
3/8
$50.25 $15.50
$48.50
7/32” – Call
$9.25
*732-CSP
91VS Loops Also Available
for Prices.$8.25
200RNDD176
20”
.050
3/8
$47.95 $46.25
316-CSP
3/16”
$9.25
$8.25
280ATMD009
28”
.050
3/8
$66.50 $64.25
532-CSP
5/32”
$9.25
Stock Number
Size
1-5
Dozen 6+$8.25
Dozen
Stock Number
Size
1-5 Dozen 6+ Dozen
280ATMD025
3/8
$66.50
1364-CSP
13/64”
$9.25
$8.25
Part Number Width 28” For .050
Chain Sizes
Price $64.25
70502
4.5
mm
$15.95
$14.95
732-CSP
7/32”
$9.25
$8.25
124MLEA074
EFFL66
3mm
1/4”, 3/8” EP, .325
$14.95
70503
3/16”
$15.95
$14.95
316-CSP
3/16”
$9.25
$8.25
Stihl
Power Pruner
.043 .404 --$16.50
EFFL64
4.7mm 12”
3/8”,
$14.50$15.50
70504
5/32”
$15.95
$14.95
532-CSP
5/32”
$9.25
$8.25
7mm
3/4” and depth gauges
$16.95
70505
13/64”
For Orders:
Phone
1.800.592.6940
318.688.6487
/6+EFFL65
www.cspcatalog.com
Model Number
Saw
Brand$15.95
Length $14.95
DL/ Fax1-2
3-5
1364-CSP
13/64”
$9.25
$8.25
70511
7/32”
$14.95
160ATMD025
Stihl $15.95
16”
60
$43.50
$42.05
$40.50
Part Number Width
For Chain Sizes
Price
180ATMD025
Stihl
18”
66
$45.75
$44.10
$42.50
6+
$40.50
$42.50
$46.65
$52.60
6+
$40.50
$40.50
$42.50
$42.50
$46.65
$46.65
$52.60
$52.60
$40.50
$42.50
6+
$46.65
$38.50
$52.60
$40.50
$44.50
$54.60
6+
$62.75
$38.50
$40.50
$44.50
$54.60
$62.75
$38.50
$40.50
$44.50
$54.60
$62.75
66
60
68
18” (Stihl)
16”
18” (Husky)
$16.50
$15.00
$17.00
$14.55
$13.20
$14.95
$13.20
$12.00
$13.60
used with a 1’ x 13/64” chain saw file.
• Sharpens any round-ground 1/4”, .325”, 3/8” or .404” pitch chain
28588 Electric Sure Sharp................................................. $54.95 each
Stock Number
Size
1-5 Dozen 6+ Dozen
70502
4.5 mm
$15.95
$14.95
17062 3/16”..................................................................... $19.95
each
70503
3/16” Files
$15.95
$14.95
PFERD
17049 7/32”..................................................................... $19.95
each
70504
5/32”
$15.95
$14.95
70505
13/64”
$15.95
$14.95
PFERD Low Profile Chain Sharp®
70511
7/32”
$15.95
$14.95
The low profile Chain Sharp has a 5/32” diameter sharpening
PFD17038 3/16”...........................................................$14.50/Dozen
file and a depth gauge file. 8” length. This model is not suited
PFD17039 7/32”...........................................................$14.50/Dozen
for other file diameters.
Stock Number
Size
1-5 Dozen 6+ Dozen
17050
Stock NumberPFD17047
Size 5/32”.
1-5 Dozen
6+ Dozen
..........................................................$14.50/Dozen
5/32”.................................................................... $19.95 each
732-CSP
7/32”
$9.25
$8.25
316-CSP
3/16”
$9.25
$8.25
532-CSP
5/32”
$9.25
$8.25
Chainsaw
1364-CSP
13/64” Bars
$9.25
$8.25
Oregon LaserTip Plus
(Hardnose) Bars
Solid nose, solid body bars for professional
users working in dirty or abrasive conditions
– 3/8”pitch/ .050 gauge.
• Also available for other chainsaw models such as Poulan, Shindaiwa, McCulloch and Jonsered
• .325 & .404 pitch and .058 & .063 gauge bars
Model Number
160ATMD025
180ATMD025
200ATMD025
240ATMD025
160ATMD009
180ATMD009
200ATMD009
240ATMD009
Saw Brand
Stihl
Stihl
Stihl
Stihl
Husqvarna
Husqvarna
Husqvarna
Husqvarna
Length
16”
18”
20”
24”
16”
18”
20”
24”
DL
60
66
72
84
60
68
72
84
1-2
$43.50
$45.75
$50.25
$56.60
$43.50
$45.75
$50.25
$56.60
3-5
$42.05
$44.10
$48.50
$54.60
$42.05
$44.10
$48.50
$54.60
6+
$40.50
$42.50
$46.65
$52.60
$40.50
$42.50
$46.65
$52.60
Oregon Power Match Plus
(Rollernose) Bars
The industry’s most popular bar. These are
solid steel bars and have replaceable tips –
3/8” pitch, .050 gauge.
• Also available for other chainsaw models such as Poulan, Shindaiwa, McCulloch and Jonsered
• .325 & .404 pitch and .058 & .063 gauge bars
Model Number
160RNDD025
180RNDD025
200RNDD025
240RNDD025
280RNDD025
160RNDD009
180RNDD009
200RNDD009
240RNDD009
280RNDD009
Saw Brand
Stihl
Stihl
Stihl
Stihl
Stihl
Husqvarna
Husqvarna
Husqvarna
Husqvarna
Husqvarna
Length
16”
18”
20”
24”
28”
16”
18”
20”
24”
28”
DL
60
66
72
84
91
60
68
72
84
91
1-2
$41.50
$43.65
$47.95
$58.75
$67.65
$41.50
$43.65
$47.95
$58.75
$67.65
3-5
$40.00
$42.05
$46.25
$56.65
$65.25
$40.00
$42.05
$46.25
$56.65
$65.25
6+
$38.50
$40.50
$44.50
$54.60
$62.75
$38.50
$40.50
$44.50
$54.60
$62.75
Replaceable Oregon Power
Match® Sprocket Nose Kits
3/8 - 11 Pitch .050/.058/.063 Gauge
Oregon Power Mate® Rim Sprockets
Item Number
Pitch chainsaw
1-5 users.
6+
PreferredLength
by mostGauge
professional
140GPEA041 “Floats” on14”
.050 hub,3/8
$27.95
the splined
allowing
chain$26.95
and
160GPEA041 sprocket to16”
.050
3/8 bar $30.50
self-align
with the
groove. $29.50
Stock Number Size DL Pitch Gauge
1-9
10+
72LP-70E
20”
70
3/8
.050
$17.50
$15.50
72LG-72E
20”
72
3/8
.050
$18.00
$15.85
90SG-44E
12”
44
3/8
.043
$12.95
$11.95
91VS-44DL
12”
44
3/8
.050
$12.95
$11.95
®
12-Volt
Sharp
91VS-52E
14”
52 Electric
3/8
.050Sure
$13.25
$12.25
Cranking Rope for Chainsaws
Chain Sharpener
RP41/2H
9/64 – 200’ Roll..............................................$18.95 each
• A durable, economical tool that RP5H
5/32 – 200’ Roll..............................................$18.95 each
easy
RP51/2H
Stock
Number makes
DL hand-sharpening
Bar Length & Number
1-3
4+
11/64 – 200’ Roll............................................$18.95
each
• Rugged,
reliable
91VG-47E
45
12” (120LAXA041)
$10.00
$9.25
• Withstands
periods
of extended use
91VG-52E
52
14”
(140LAXA041)
$11.40
$10.65
PFERD Chain Sharp
•
Runs
on
a
standard
12-volt
auto $12.50
91VG-58E
58
16”
(160LAXA041)
$11.95
PFERD Chain Sharps are now offered in three sizes. The
type
55 battery
16” (160LAXA041)
$12.50
$11.50
professional models are available with either a 7/32” or 91VG-55E
3/16”
• Includes
three
sizes of grinding $12.75
56
16” (160LAXA041)
$11.75
diameter chain saw file and both come with a flat depth91VG-56E
gauge
62
16” (160LAXA041)
$12.95
$11.95
stones
file. Both are 8” long. These professional models can also91VG-62E
be
72LP-66E
72LP-60E
72LP-68E
200ATMD176 R682105S 20”
3/8
$50.25 $48.50
3/8 - 7, .050
Large Spline
200RNDD176 22273
20”
.050
3/8
$47.95 $46.25
3/8
8,
Large
Spline
30853 1-2..........................................................................$17.45 each
280ATMD009 18720
28”
3/8
$66.50 $64.25
3/8 - 7, .050
Small Spline
3-5..........................................................................$15.95
each
280ATMD025
28”
3/8
$66.50 $64.25
11892
.325 – 7.050
6-11........................................................................$14.95
each
124MLEA074
1-11....................................................................................... $5.95 each
12+.........................................................................$13.95
Stihleach
Power Pruner
12”
.043
--$16.50 $15.50
12+........................................................................................
$4.95 each
For Orders:
Part Number Width
For Chain Sizes
Price
EFFL66
3mm
1/4”, 3/8” EP, .325
$14.95
Phone
1.800.592.6940
318.688.6487
/ www.cspcatalog.com
EFFL64
4.7mm / Fax3/8”,
.404
$14.50
EFFL65
7mm
$16.95
421
200RNDD025
240RNDD025
280RNDD025
160RNDD009
180RNDD009
200RNDD009
240RNDD009
280RNDD009
Stihl
Stihl
Stihl
Husqvarna
Husqvarna
Husqvarna
Husqvarna
Husqvarna
20”
24”
28”
16”
18”
20”
24”
28”
72
84
91
60
68
72
84
91
$47.95
$58.75
$67.65
$41.50
$43.65
$47.95
$58.75
$67.65
$46.25
$56.65
$65.25
$40.00
$42.05
$46.25
$56.65
$65.25
$44.50
200ATMD009
Husqvarna
20”
72
$50.25
$54.60
240ATMD009
Husqvarna
24”
84
$56.60
$62.75
$38.50
$40.50
Model Number Saw Brand Length DL
1-2
$44.50
160RNDD025
Stihl
16”
60
$41.50
$54.60
180RNDD025
Stihl
18”
66
$43.65
$62.75
200RNDD025
Stihl
20”
72
$47.95
240RNDD025 Clearing
Stihl Saw
24”Blades
84
$58.75
Carlton
280RNDD025
Stihl
28”
91
$67.65
Made of Swedish steel and exceed all
160RNDD009standards
Husqvarna
16” and 60
$41.50
international
for durability
180RNDD009
Husqvarna
18”
68
$43.65
safety. Rated to 13000 RPM’s, clearing saw
200RNDD009
Husqvarna
20”
72
blades feature a ground edge and can easily be $47.95
240RNDD009
Husqvarna
24”
84
$58.75
re-sharpened with standard chainsaw files. 9”
280RNDD009
Husqvarna
28”
91
$67.65
Oregon In-Stock Chainsaw Bars
Item Number
140GPEA041
160GPEA041
200ATMD176
200RNDD176
280ATMD009
280ATMD025
124MLEA074
Stihl Power Pruner
Length
14”
16”
20”
20”
28”
28”
Gauge
.050
.050
.050
.050
.050
.050
Pitch
3/8
3/8
3/8
3/8
3/8
3/8
1-5
$27.95
$30.50
$50.25
$47.95
$66.50
$66.50
6+
$26.95
$29.50
$48.50
$46.25
$64.25
$64.25
12”
.043
---
$16.50
$15.50
EFCO Bench-Model Chain Breaker
®
• Part
Professional
model For Chain Sizes
Number shop
Width
•EFFL66
Smooth cam action
3mm
1/4”, 3/8” EP, .325
•EFFL64
Specially designed
for optimum
.404
4.7mm
3/8”,
EFFL65
leverage
7mm
• Includes attachment for replaceable bar nose
• Complete with punch and anvil for all chain sizes
Price
$14.95
$14.50
$16.95
EFFL20 ............................................................................ $69.95 each
EFFL22 Replacement Punch................................................ $4.95 each
* Parts Available
Retro-Fit Kit for 3/4” Pitch Chain
• Enables breaking of 3/4”-pitch chain on the Bench Chain Breaker
• 3/4”-Pitch Breaker Retro-Fit Kit includes handle, punch and anvil.
102616
102618
Retro-Fit Kit.................................................... $54.95 each
3/4”-Pitch Chain Punch Only..........................$19.95 each
EFCO Hand Rivet Spinner
• Built-in thrust bearing for low friction
• Chain guides are height adjustable for easy centering of rivet
• Includes “A” anvil
(for 3/8”, .404” & 1/2” chain)
• Includes “B” anvil (for 1/4” & .325” chain)
®
EFFL25...............................................................................$62.95 each
* Parts Available
Upright Bench Mount Electric
Chainsaw Chain Sharpener
• Motor:110 V/60 Hz
• Motor input power: 230 Watt
• Maximum speed: 3600 rpm
• Includes: Thermo-overload protection
• Work Light: 15 watt
• Includes: 3 grinding wheels sizes 1/8”, 3/16”, 1/4”
78001............................................................................... $152.99 each
EFFL102 3/4 Pitch Vise.....................................................$99.95 each
3/4”-Pitch Vise for the Bench Model
Chain Grinder
Diameter-.75”/20mm Arbor – 24 Teeth
$48.50
$54.60
$46.65
$52.60
3-5
$40.00
$42.05
$46.25
$56.65
$65.25
$40.00
$42.05
$46.25
$56.65
$65.25
6+
$38.50
$40.50
$44.50
$54.60
$62.75
$38.50
$40.50
$44.50
$54.60
$62.75
MAXI-225-20......................................................................$14.95 each
10+.....................................................................................$13.95 each
Item Number
Length Gauge Pitch
1-5
6+
®
140GPEA041
14”
.050
3/8
$27.95 $26.95
Bench Grinder
Wheels
EFCO
160GPEA041
16” wheels
.050
3/8
$30.50 $29.50
These
high-quality grinding
200ATMD176
20”
.050
3/8
$50.25 $48.50
resist burning of the cutters and leave
20”
.050
3/8
$47.95 $46.25
a 200RNDD176
precision finish.
280ATMD009
28”
.050
3/8
$66.50 $64.25
280ATMD025
28”
.050
3/8
$66.50 $64.25
124MLEA074
Stihl Power Pruner
12”
.043
--$16.50 $15.50
Part Number
EFFL66
EFFL64
EFFL65
Width
3mm
4.7mm
7mm
For Chain Sizes
1/4”, 3/8” EP, .325
3/8”, .404
Price
$14.95
$14.50
$16.95
Wedges
• Non-grip barbs
• Resists chipping and breaking
• Orange color
• Available in 3 lengths
NPP-55
NPP-75
NPP-105
5-1/2” Wedge...................................................$3.95 each
7-1/2” Wedge...................................................$7.50 each
10-1/2” Wedge.................................................$9.95 each
Emergency Strobe Light
A hand-sized, battery powered, personal
strobe light that emits pulsing beacons
of light 50-70 times per minute, for up
to 16 hours and will continue to flash
at a diminished rate for up to 60 hours.
The extremely bright amber flashing
light can be seen at night or at dusk up
to a distance of 3 miles depending on
the prevailing atmospheric conditions.
Requires one D cell battery (not included)
5013-A
AL-D
Strobe Light w/ Amber Lens...........................$19.95 each
D-Cell Battery.....................................................$.90 each
Replacement Lens
LENS-R
LENS-B
LENS-C
LENS-A
Red Lens...........................................................$2.00 each
Blue Lens..........................................................$2.00 each
Clear Lens.........................................................$2.00 each
Amber Lens......................................................$2.00 each
EFFL102.............................................................................$99.95 each
A1LM
100 Ft. Roll................................................................................................. $299.95 each
Oregon Replacement
Sprocket Nose Kit
Oregon Harvester Chain – .404 Pitch
16H
18H
18H-87DL
18H-101DL
100’ Roll – 63 Ga. – Micro Chisel – Full Sequence.................................... $379.95 each
100’ Roll – 80 Ga. – Radius Chisel – Full Sequence................................... $379.95 each
Loop, 80 Ga. – 87 Drive Links.................................................................... $29.95 each
Loop, 80 Ga. – 101 Drive Links.................................................................. $30.95 each
Carlton B5M Harvester Chain – .404 Pitch – .080 Gauge
B5M-100R Full Chisel – 100’ Roll..............................................................................$312.50 each
B5MSK-100R Skip Tooth – 100’ Roll.............................................................................$312.50 each
Replacement Sprocket Nose Kit
40603.......................................$79.95 each
Replacement Rivets for 40603, 25 /pk
41796.................................. $8.95 per pack
Oregon 11H Chain – 3/4” Pitch
Carlton G7SP Chain – 3/4” Pitch
11H-50R 50’ Roll – 3/4 Pitch Chain................................... $325.00 each
G7SP-50
Loops:
Carlton G7SP Chain Loops – 3/4” Pitch
11H-56DL
11H-57DL
11H-66DL
11H-89DL
11H-96DL
11H-102DL
11H-106DL
3/4” Pitch – 56 Drive Links.............................$48.75 each
3/4” Pitch – 102 Drive Links...........................$88.75 each
3/4” Pitch – 106 Drive Links...........................$92.25 each
*Other Size Loops Available. Add $ .87 per Drive Link
R50 Ft. Roll..................................................... $314.95 each
G7SP-56E
G7SP-57E
G7SP-58E
G7SP-59E
G7SP-60E
G7SP-89E
G7SP-96E
Carlton A1LM Chain – 3/8” Pitch – 100 Ft. Roll
• 3/8” Pitch
• .050 Gauge
• Full Chisel
logging supplies
& Equipment
*Other Size Loops Available. Add $ .83 per Drive Link
Tie Straps & Presets for 3/4” Pitch Chain
P107539 Oregon Tie Strap, 11H or 11BC, 25 /pk...........................$12.95 per pack
P107540 Oregon Presets, 11H or 11BC, 25 /pk.............................$21.50 per pack
43202
43203
43202
43203
Tie Straps, 25 /pk....................................$13.95 each
Presets, 25 /pk........................................$19.95 each
Carlton Tie Straps, 25 /pk..............................................$13.95 per pack
Carlton Presets, 25 /pk..................................................$19.95 per pack
P107541 Left Hand Cutting Teeth, 11BC, 25 /pk...........................$31.95 per pack
P107542 Right Hand Cutting Teeth, 11BC, 25/pk..........................$31.95 per pack
Oregon 5/16” Round
Files for 11H/ 11BC
Chain
90410 Box of 6.................................................... $16.50 each
cspcatalog.com
New items arriving daily!
423
csp extreme alloy bars
CSP Extreme Alloy Bars
CSP offers high quality slasher and delimber bars. All bars are .122 gauge and are cut from specially formulated and
heat treated steel. Roller nose bars come with an Oregon replaceable 5 rivet nose. The following bars are currently in
stock but other bars are being added daily. Please call if you have any questions.
PART #
34HN-CTR
34CTRSN
34H208S
36CTRSN
40CTRSN
58H136D
58CTRW-42IP
66H155U
CSI-34
37SNCSI
43SNCSI
59H191U
58FECDE
65H135D
40H138S
60H137M
72H137M
43H161S
58H178D
34TIMSN
38TIMSN
34H134S
32H622S
34H151S
36H146S
MAKE
CTR - 2009
CTR
CTR
CTR – 2005
CTR – 2004
CTR – 10/2011
CTR
CTR – 8/2011
CSI – 2007
CSI
CSI
CSI
HUDSON/FEC - 2009
HUDSON/FEC
HULTDIN – 2005
L & M – 2008
L & M - 2009
PIERCE PACIFIC – 2006
RILEY
TIMBCO – 2004
TIMBCO – 2/2011
TIMBERLINE – 2008
WARATAH - 2008
WARATAH
WARATAH
MODEL
DELIMBER 400, 450, 500
DELIMBER 400, 450, 500
400 (2003 AND AFTER)
DELIMBER 450, 500, 550
DELIMBER 400, 450, 500
SLASHER DOUBLE-END
SLASHER 42-IP
SLASHER 50-IP
PTD-143, PTD-243
PTD-143, PTD-243
PTD-143, PTD-243
DL-4400 SLASHER
SLASHER DOUBLE-END
SLASHER DOUBLE-END
SUPERCUT 300, 350
DECK SAWS
DECK SAWS
HSD 3345, 3348, PMD 3348
BCL-43, HG 6600, HG 3500
34” SAW HEAD
38” SAW HEAD
ST 3510, ST 3520, ST 3530
HTH 622
D230, D240, D250, DS260
HTH 24
NOSE
H/N
S/N
SN
S/N
S/N
D/E
U/E
U/E
H/N
S/N
S/N
U/E
D/E
D/E
S/N
D/E
D/E
S/N
D/E
S/N
S/N
S/N
S/N
S/N
S/N
LENGTH
34
34
34
36
40
58
58
66
34
37
43
59
58
65
40
60
72
43
58
34
38
34
32
34
36
DRIVE LINKS
56
56
56
59
67
89
96
106
56
60
66
96
91
106
60
65
96
55
60
54
50
56
57
PRICE
$299.95
$324.95
$324.95
$339.95
$359.95
$361.50
$395.95
$487.50
$299.95
$324.95
$359.95
$395.95
$379.95
$469.95
$359.95
$429.95
$499.95
$359.95
$361.50
$324.95
$337.50
$324.95
$319.95
$324.95
$339.95
*hard to find bars available
CSP Also Offers Bar Rebuilding Service
3/4 Pitch Slasher Bars..........................................................................................................................................................................$165.00
3/4 Pitch Delimber Bars. .....................................................................................................................................................................$105.00
100-JT-6......................... Call for Current Price
TruSouth Bar and Chain Oil
• High Tac Formula
• 1 Gallon Plastic Jugs – 6 per case
100-BC........................................... Call for Current Price
Pure Guard Premium Engine Oil
• 8 oz. Plastic Bottles – 24 per case
100-2CO........................................ Call for Current Price
Tractor Hydraulic Fluid
• 5 Gallon Plastic Bucket
100-TH.......................................... Call for Current Price
Logging  Logging Supplies & Equipment
Mystik Red Multi-Purpose High Temperature Grease
Logging
Logging
14
oz. Tubes
– 10
per caseSupplies & Equipment
Wedco
Two-In-One
Mix Gas/Bar Oil Container
100-JT-6
CALL FOR CURRENT PRICE
Mystik Red Multi-Purpose High Temperature Grease
Built tough with high-density polyethylene for unlimited uses. Store two-cycle gas/oil mix
14 oz. Tubes
10 Chain
per case
TruSouth
Bar –and
Oil
in one side and chain bar oil in the other side. Features a reversible flex spout with flame
100-JT-6
High
Tac FormulaCALL FOR CURRENT PRICE
arrestor and filtering screen plus a screw-on vent cap for positive seal. UL® classified, MA
1 Gallon Plastic Jugs – 6 per case
TruSouth Bar and Chain Oil Fire Marshall approved and C.S.A. approved.
100-BC
High Tac1.5
Formula
W150
Gallon.................................................................................................................................................. $22.50 each
1 Gallon
Plastic
Jugs –Engine
6 per case
Pure
Guard
Premium
Oil of Cans Available
*Other
Sizes
andFOR
Colors
CALL
PRICE
8100-BC
oz. Plastic Bottles
– 24 perCURRENT
case
100-2CO
Pure Guard Premium Engine Oil
8 oz. Plastic
Bottles
– 24 per case
Tractor
Hydraulic
Fluid
5100-2CO
Gallon Plastic Bucket
Winch Line Cable
100-TH Ferrule
with
Tractor Hydraulic Fluid
•Winch
x 26
EIPS
IWRC
Construction, Steel
56Gallon
Plastic
Bucket
Line
Cable
with Ferrule
FOR CURRENT
*Other
Lengths
Available
6100-TH
x 26 EIPS
IWRC CALL
Construction,
Steel PRICE
34-75-626
34-75-626
¾” x 75’
3/4”
x
75’..................Call
for Current Price
Winch Line Cable with Ferrule
1-100-636SF
1-100-636SF 1” x 100’....................Call
1” x 100’’
for
Current Price
6 x 26 EIPS IWRC Construction, Steel
Other Lengths Available
34-75-626
¾” x 75’
1-100-636SF
1” x 100’’
Grade
43 Winch Line Tail Chains
Other 43
Lengths
Grade
WinchAvailable
Line Tail Chains
FOR CURRENT
•CALL
Special
designedPRICE
hook forged and tempered
 number
Special designed
hook
tempered
•Grade
Odd
of
links
offorged
chainand
prevent
twisting of Winch
LineofTail
Chains
 43
Odd
number
chain
during
hooklinks
up of chain prevent twisting of chain during hook up
All
assemblies
are hook
100%forged
proof tested
Special
designed
tempered
• Allassemblies
are
100%
proofand
tested
 Assemblies
areofself
colored
Odd number
links
of chain prevent twisting of chain during hook up
• Assemblies are self colored
All assemblies
100% proof
testedLoad Limit
PartNumber
Size areLength
Working
Price
 Assemblies
are self18”
colored
695074
1/2”
9,200 lbs
$42.95
695078
5/8”
18”
13,000 lbs
$108.95
Part
Number 3/4”
Size Length
Working
Load
Price
695080
18”
20,200
lbs Limit $133.95
695074
1/2”
18”
9,200 lbs
$42.95
695078
5/8”
18”
13,000 lbs
$108.95
18”
20,200 lbs
$133.95
Alloy695080
Tail Chains
Alloy
Tail3/4”
Chains
Delimbinator Chain – Flail Chain
• 12 Link
• .630 Diameter
• 10B21 Carbon Steel
• 80 per Drum
• About 3/8” shorter than other Delimbinator chains
Mystik Red Multi-Purpose
High Temperature Grease
• 14 oz. Tubes – 10 per case
T0213458...............................................................Call for Current Price
Debarking Flail Chain
10B21 Carbon Steel, .656 Diameter
T0213458
8 Link, 250/Drum............................. Call for Current Price
 Made
Alloychain
chain and
and used
with
wirewire
rope when
is required to lift, pull or skid
• Made
fromfrom
Alloy
used
with
ropewrapping
T0213459
9 Link, 200/Drum............................. Call for Current Price
Chains
 Tail
Special
hook isisdesigned
to minimize
fraying
wire rope to which it is attached
Alloy
when
wrapping
required
to lift, pull
orofskid
 Proof
tested
• Special
hook
is Alloy
designed
to used
minimize
fraying
of wire
is required to lift, pull or skid
Made
from
chain and
with wire
rope when
wrapping
Part
rope
to
which
it
is
attached
Number
Special
hook
is
designed
to
minimize
fraying
of
wire
rope
to
which it is attached
Size Length Working Load Limit
Price
• Proof
tested
 Proof
tested
2011295
3/4”
18”
23,000 lbs
$198.95
2011495
7/8”
24”
34,200 lbs
$239.95
Part
Number 1”
Size Length
Working
Load
Price
2011695
24”
38,700
lbs Limit $279.95
2011295
3/4”
18”
23,000 lbs
$198.95
2011495
7/8”
24”
34,200 lbs
$239.95
2011695 Chain
1”– Flail24”
38,700 lbs
$279.95
Delimbinator
Chain
 12 Link
Delimbinator
Chain – Flail Chain
 .630 Diameter
 10B21
12 LinkCarbon Steel
 About
3/8” shorter than other Delimbinator chains
.630 Diameter
 80
per Drum
10B21
Carbon Steel
 About 3/8” shorter
Delimbinator
T0213458
CALLthan
FORother
CURRENT
PRICE chains
 80 per Drum
425
safety horns/lockout-tagout devices
falcon safety horns
Mighty Sonic Safety Horn
The Lightweight, Portable, Long-Lasting Safety
Horn. Built for long-lasting reliability - totally
independent of any other power source - the
portable Mighty Sonic is 100% ozone-safe and
non-flammable! POWERFUL!
Delivers a piercing 120dB blast at 10 feet.
EASY! Convenient push-button operation. UNBREAKABLE!
Guaranteed durable high-impact trumpet.
msn......................................................................................$31.50
Sound 911 Safety Horn
Feel safe while jogging, shopping, biking or
any time you need the reassurance knowing
help is a signal blast away. Sound 911
Personal Safety Horn sends out a 112-decibel
blast of piercing sound to deter a wouldbe assailant or unfriendly animal. This
convenient, compact device can be heard up
to 1/2 mile away and attaches easily to your
belt or wrist with the included Velcro® strap. The Sound 911
Personal Safety Horn is 100% safe for the ozone and requires no
wires or batteries.
911...................................................................................$12.75 each
911R 911 Safety Horn Refill - 2 pack........................................$12.50
lockout/tagout devices
All American Locks are available in Keyed Alike (KA) or Keyed Different (KD).
We can also get your existing Master Lock numbers keyed to American in
Models 30 (Master #3), 10 (Master #1) and 50 (Master #50). Give your key
number when placing your order.
Solid Aluminum Padlocks
American Lock’s solid aluminum padlocks are made from
an exclusive aluminum alloy, offering protection similar to
brass in most harsh or caustic environments. Most aluminum
padlocks have hardened boron alloy steel shackles for superior
cut resistance, which are chrome plated for extra corrosion
resistance.
Model 10- 1-3/4” Wide, 3/4” Thick w/ 1-1/8” Shackle
10KA
10
10KA
Keyed Alike...................................... $12.95 each
Keyed Different................................ $12.95 each
Keyed Way #1.................................. $12.95 each
MODEL 30 - 1-1/2” Wide, 3/4” Thick w/ 1” Shackle
30KA
30
30KA
Keyed Alike...................................... $9.95 each
Keyed Way #1.................................. $9.95 each
* Longer shackles available, call for prices:
Model 10 – 2” & 3”
Model 30 – 1-1/2” & 3”
Solid brass Padlocks
American Lock solid brass padlocks resist moisture, including
saltwater, offering ideal protection to equipment and buildings
in even the harshest outdoor or corrosive environments.
Hardened boron alloy shackles offer superior cut resistance,
while dual stainless steel ball bearing locking mechanism resists
pulling and prying. Shackles are chrome plated for corrosion
resistance, with rust-resistant brass shackles available as the
best option for marine applications.
Model 20 - 1-3/4” Wide, 3/4” Thick w/ 1-1/8” Shackle (5-pin)
20KA
20
Keyed Alike...................................... $14.95 each
1-3/4” Wide, 3/4” Thick w/ 1-1/8” Shackle
• 10-blade tumble cylinder
• Rekeyable
L50KA
L50KD
Keyed Alike..................................... $17.95 each
Keyed Different.............................. $17.95 each
* Longer shackles available, call for prices:
Model 20 & 50L - 2” and 3”
American Lock solid steel padlocks are the strongest padlocks available — hardened, triple plated
steel bodies resist break-in attempts, corrosion, rust and debris while the stainless steel double
ball locking mechanism further assures the lock’s strength and performance. Hardened boron alloy
shackles offer superior protection against cutting, while serrated cylinder pins resist picking.
Model 50
Model7200- high security
50KA
50
50KA
7200KA
7200KD
• 2” Wide, 7/8” Thick, 1-1/8” Shackle
• 1-3/4” Wide, 7/8” Thick, 7-pin Tubular Cylinder
Keyed Alike...................................... $14.95 each
Keyed Way #5.................................. $14.95 each
Keyed Alike.................................. $24.95 each
Keyed Different............................ $24.95 each
* Longer shackles available, call for prices: Model 50 – 2” & 3”
* Please specify restrictions when ordering
Model7300- maximum security
Model 700
• 2-1/2” Wide, 1-1/8” Thick, 5-pin
700KA Keyed Alike.................................... $24.95 each
700KD Keyed Different.............................. $24.95 each
• 2-1/4” Wide, 7/8 Thick, 7-pin Tubular Cylinder
7300KA
7300KD
Keyed Alike.................................. $24.95 each
Keyed Different............................ $24.95 each
*Tubular and Blade Keys available for Models 700 & 7300
Lockout Tech Cable Lockout System
The Cable Lockout System, is an adjustable cable lockout system that does not require heavy
chains. The unique design of the Cable Lockout System, made of high impact UV resistant
Polypropylene plastic, incorporates the features of the hasp, allowing up to six (6) individual
operators the use of #3 padlocks to safely lockout their equipment without compromising
company safety standards.
solid steel padlocks
Any operator can lockout a valve in THREE easy steps:
• Pull cable through equipment
• Insert cable from the side into the slotted groves of the base
• Tighten cover by hand, or for extra safety use a 5/8” box end wrench
The Cable Lockout System is designed for use in aggressive Upstream & Downstream
environments. It is lightweight, extremely versatile, meets OSHA Lock Out Tag Out standards
1910.147, durable, UV resistant cable can withstand temperature ranges between -65F and
+165F, and Made in the USA. Hi-Viz Orange
LOC-HVZ-4
LOC-HVZ-6
LOC-HVZ-8
4’ Looped Cable.......................................................................................................................................................$20.95 each
* Can supply 2’ – 50’ lengths. Available in different colors: Red, Yellow and New Blue. Call for more information.
North Portable 13 Lock
Group Lockout Box
• 16 gauge steel sides, 20 gauge steel body and cover
• Accepts 13 locks
• 7.5” h x 11.5”w x 4.5” d.
• Red
GLB03/E......................................................................$74.95 each
Sesamee Resettable Combination Lock
• Pressure cast body with case hardened 1” double locking steel shackle plated to resist corrosion
• Black epoxy brass mechanisms
• Opening number is easily set and can be changed at any time by the owner
• Lifetime guarantee.
K500
3/4” Shackle................................................ $16.95 each
K500-2-1/4 2-1/4” Shackle............................................. $19.95 each
427
Masterlock Aluminum 4 Padlock Station
• Safety Lockout covered padlock station with 4 of the A1106RED aluminum padlocks, keyed different
• (2) hasps and 1 bag (12
tags) Do Not Operate Tags
• Exclusive lockable translucent cover protects contents from dust and grime and ensures the lockout padlocks are there when you need them
• Resilient polycarbonate material provides twice the heat resistance and quadruple the impact strength of typical stations
• One piece molded construction means no glued hanger clips or tag pockets to ever come loose
• Reinforced snap-on clips provide easy padlock and hasp storage and removal
• Station measures 12-1/4” high x 16” wide x 1-3/4” deep
4 PADLOCK STATION....................................................$ 119.95 each
Masterlock Aluminum Safety Lockout
Rectangular Padlocks
• American Lock solid aluminum padlocks are made from an exclusive aluminum alloy, offering strong protection against the elements.
• Aluminum padlocks have hardened boron alloy steel shackles for superior cut resistance, and are chrome plated for extra corrosion resistance.
• These lightweight, durable padlocks are offered in nine anodized finishes: black, blue, brown, clear/silver, green, orange, purple, red or yellow.
* Please specify color when ordering.
A1105-Color
A1107-Color
1” Shackle............................................. $13.95 each
3” Shackle............................................. $14.95 each
Heavy Duty Do Not Operate Tags
• 5-3/4” high x 3-1/8” (14.6cm x 7.9cm) wide heavy duty English tags
• 7/16 dia. brass grommet accepts all safety padlocks
• Complies with OSHA lockout/tagout standard
• Durable polyster laminate resists water, grease and extreme temperatures
• Heavy duty construction withstands over 50 lbs. of pullout force (meets OSHA requirement)
• Customize with name, department, expected completion
497A Bag of 12 Tags with Ties......................................... $12.95 each
Masterlock Lockout Hasps
• Lockout by multiple workers at each lockout point
• Keeps equipment inoperative while repairs or adjustments are made
• Control cannot be turned on until last worker’s padlock is removed from hasp
• Heavy gauge steel jaw with red vinyl coated handle
• Dimensions are 1-3/4” x 4-1/2” (4.4cm x 11.4cm) with 1” (2.5cm) inside jaw diameter, holds up to 6 padlocks
L01.0................................................................................ $ 5.25 each
L01.5................................................................................ $ 6.95 each
Masterlock Brass Combination Locks
• Masterlock Brass Combination Locks allow you to set your own 4 digit combination for convenience and security
• Hardened steel shackle for extra cut resistance. 2” wide solid brass body for strength and weatherability
• Easy to set and reset. Combination change key included
175D 1” Shackle...........................................................$18.95 each
175LH 2-1/4” Shackle.....................................................$20.95 each
Need a lock not shown here?
No problem! Just let us know!
Lockout/Tagout Center
16” x 16” high impact plastic center features three 3” deep pockets and 6 hooks for padlocks. The complete
center includes 10 lockout tags and 1 booklet: “Lockout to Prevent Accidents”.
Accident Prevention Tags
Plastic tags with “Write On” Surface (Size 3” x 5 ¾”), conform to OSHA Specification 1910.145 for accident
prevention tags. Made of unrippable vinyl. Other legends available.
TAG-40-EA
TAG-12-EA
Lockout Tag (w/Grommets).............................................................................................$1.35 each
Do Not Operate Tag (Hole Punch, No Grommet)................................................................$.90 each
personal lockout toolbox
generic lockout kit
This 17” wide lockable toolbox features an
ultra-durable design that keeps important
lockout devices and padlocks together.
• 3 Locks
• 10 Tags
• 3 Hasps
• Gray Box
1457.................................................................................. $14.95 each
LOC-CSP............................................................................. $99.95 each
Portable Red Group Lock Box
- Latch Tight™
• Secure each lockout point on a piece of equipment with just one designated lock
• Capture the keys from those lockout points by placing them in the lock box
• Each authorized employee locks one personal safety lock onto the box, removing them only when their work is complete
• Exclusive Latch Tight feature ensures that keys cannot be accessed until the last lock is removed
• Durable powder-coated red finish with an easy-to-grip, ergonomic handle
• Lockout message in English, Spanish and French communicates to all workers
• Accommodates up to 12 workers, more with the use of lockout hasps
Flambeau GRAY Utility Box
• Manufactured from lightweight copolymer resins that are nonconductive, dent-proof, rustproof and scratch-resistant
• Tool box has interior dimensions of 11-1/8” x 5-3/4” x 4” and exterior dimensions of 12-1/8” x 7-1/4” x 4-1/2”.
1100................................................................................... $15.00 each
We can customize a lockout
box just for you.
Call for more details!
498A..................................................................................$64.50 each
The Flambeau 1100 is a Gray single
compartment tool box.
lockout/tagout devices & right to know centers
Right To Know Center
This 24” x 30” high impact plastic display
features three 4” deep pockets. The complete
center includes the 2½” MSDS binder with a
36” chain and 10 booklets: “Hazards in the
Workplace: Your Right to Know”. The pocket
can be personalized with your company name
or department.
Easy Clean Right To Know Center
Display your Right to Know data in the highly
visible center. The PVC wire pocket is sturdy and
can be sprayed off for easy cleaning. This display
includes binder, chain and 10 booklets.
RTKC-110............................................................................$98.95 each
RTKC-300............................................................................$69.95 each
knives & pocket tools
Tri-Hone Sharpening System
Features a 6” Medium Arkansas, 6”
Fine Arkansas and 6” Coarse Synthetic
Stone mounted on a molded plastic
triangle with handles on the end for
easy stone rotation. The sturdy molded
plastic base has nonskid rubber feet
for safety, “V” trough to catch the
oil drippings, easy-to-read stone identification and is easy to
clean. It will not get oil soaked, split or crack like wooden bases.
Premium Honing Oil Included.
Jiff “V” SHARP Carbide Sharpener
The Smith “V” SHARP features
a specially designed “V” shaped
cutting head with two crossed
carbide blades. This allows you to
put a quick edge on your knife or
tool every time, with just three
or four strokes. It is safe and easy to use, and the cutting heads
are replaceable.
JIFF ......................................................................................$6.95 each
TRI-6..................................................................................$29.95 each
429

CHAINSAW PROTECTIVE CLOTHING - Construction Safety Products

Transcription

Similar documents

FOR SALE - Southern Loggin` Times

TOLL FREE: 1-800-669-5613

wanted to buy - Southern Loggin` Times