A5 CTX Cat Cover 2005 - Connectix Cabling Systems

Transcription

PRODUCTS
& SERVICES
ISSUE 6
Ordering
& Locations
How to Order
You can place an order by telephone, fax, email or post.
Technical support for each product is available should you
require assistance before purchasing, just speak to a
member of our sales team. The Connectix order
processing system is on-line throughout the day to
provide instant pricing and product availability information.
Carriage Charge
UK: All orders under £500.00 will incur a £9.00 handling
charge. Orders above £500.00 are delivered free of
charge. Free delivery excludes floor standing and wall
mounting cabinets and timed deliveries, for which a
nominal fee is charged. Ireland: Orders above €350 in
County Dublin, carriage paid.
Dublin
29 Westlink Industrial Estate
Kylemore Road, Dublin 10, Ireland
Freephone: 1850 924 249
Telephone: +353 (0)1 6236751
Facsimile: +353 (0)1 6236759
E-mail: [email protected]
Birmingham
Upper 1st Floor Suite
4 The Square
Solihull B91 3RB
Telephone: +44 (0)121 705 8333
Facsimile: +44 (0)121 705 8686
Email: [email protected]
Credit Accounts
Credit accounts can be opened instantly with Connectix
(Terms: 30 days nett), simply speak to our sales team for
further details.
Credit Card Payments
We can accept Visa, Visa Delta,
MasterCard and Switch.
Opening hours
Our offices are open Monday to Friday from 8.30am to
6.00pm.
Edinburgh
Unit B8, Midlothian Innovation Centre,
Pentlandfield, The Bush, Midlothian EH25 9RE
Telephone: +44 (0)131 440 4012
Facsimile: +44 (0)131 440 4901
Braintree
33 Broomhills Industrial Estate
Braintree, Essex CM7 2RW
Telephone: +44 (0)1376 346600
Facsimile: +44 (0)1376 346620
London Docklands
Unit F1 Lanterns Court
Mill Harbour, London E14 9TU
Telephone: +44 (0)207 536 5555
Facsimile: +44 (0)207 536 9741
Daventry
Nene House, Drayton Fields Ind Est
Daventry, Northants NN11 5EA
Telephone: +44 (0)1327 312622
Facsimile: +44 (0)1327 300809
Contents
Page No.
About Connectix
About Connectix Cabling Systems
Structured Cabling System
Lifetime Warranty
Approved Installer Programme
Custom Colour Service
Custom Logo Service
4000 Series Outlets
4000 Series Shuttered Outlet
4000 Series Vertical Outlet
4000 Series Tamperproof Outlet
4000 Series 5 Port Ethernet Switch
Category 6 Cabling System
Category 6 UTP Module
Category 6 LJ6C Module
Category 6 Patch Panels
Category 6 UTP Solid Cable
Category 6 Patch Leads
Category 6 FTP Module
Category 6 FTP Patch Panel
Category 6 FTP Cable
Enhanced Category 5 Cabling System
Enhanced Category 5 UTP Module
Enhanced Category 5 Compact module
Enhanced Category 5 LJ6C module
Enhanced Category 5 Patch Panels
Modular Patch Panel
2020 Series High Density Panel
Through Coupler Panel
Enhanced Category 5 UTP Solid Cable
Enhanced Category 5 Patch Leads
Enhanced Category 5 FTP Module
Enhanced Category 5 FTP Patch Panel
Enhanced Category 5 FTP 2020 Panel
Enhanced Category 5 FTP Solid Cable
Connectix Cabling System Tools & Accessories
Desktop Outlets
LJ6C Metal Face Plates
Euro Faceplate Adaptor
Cable Tidy Rings
Cable Management Accessories
Labelling Machines
Connectix Labelling System
Lantek 6 & 7 LAN Cable Testers
Installation Tools
Tester & Cable Stripper
Cable Assembly Accessories
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Page No.
SOHO & Home Cabling
Mini Networking Equipment
Mini Cabinets
Home Cabinet
Home Patch Panel
Home TV Unit
Home Outlet Plates
Fibre Optic Cabling
Connectors
Terminated Assemblies
Fibre Patch Panels
Break Out Boxes
Lockable Wall Mount Enclosures
Opal™ Pre-terminated Cabling
Internal/External Uni-loose Tube Distribution Cable
Internal/External Tight Buffered Distribution Cable
Uni Tube Corrugated Steel Armoured Cable
SWA UNI Tube Fibre Cable
Termination Kit & Fyberscope™
Light Source and Power Meter Kits
Cabinets
Server Cabinets
Floor Standing Cabinets
Wall Mounting Cabinets
Lightweight Wall Mounting Cabinet
Cabinet Accessories
Roof Mounting Fan Units / PDU’s
Active Ethernet Products
Smart Gigabit Switches
Smart Switch with Gigabit
8 Port 10/100 + 2 Gigabit Port Switch
Managed 24 Port Switch + Gigabit Option
24 Port Smart Switch
5, 8 and 16 Port Switches
7 port 10/100 + 100FX SC Mini Switch
4000 Series 5 Port Switch
16 Slot Rack Mountable Chassis
Converters
Voice Cabling Products
UTP Telco Patch Panel
50 Way Voice Panel
Voice Converter
Voice Cabling
Containment
Mini & Maxi Trunking
Dado Trunking
Conduit
Back Boxes
AV Connector Outlet
Training Courses
Structured Cabling Course
Fibre Optic Termination Course
Voice Cabling Installation Course
Installation Practices
Wiring Specifications
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
1
About
Connectix
Connectix Limited was formed in 1993 and has
become a leading manufacturer and distributor of
communication products for data and voice
networks.
Design
Connectix strive to produce innovative networking
products using the most advanced design and network
analysis equipment. Our design team constantly pursue
new areas of product enhancement in order to keep
ahead of technological changes in the market. Our in
house facility makes it easy for us to customise products
to clients requirements, and manufacture bespoke
items.
Manufacture
Connectix manufacture products using high quality
components from industry renowned suppliers such as
Tyco and Draka UK. Our Structured Cabling System
products are manufactured to the highest specification
using technologically advanced machinery.
We also operate one of the largest fibre patch lead
termination and production facilities in the UK.
Quality
Every product we manufacture is tested at each stage of
production to ensure the highest quality is maintained.
Our commitment to the quality and performance of our
products is demonstrated by the extensive warranty
options available.
2
Stock
We have extensive warehouses in both the UK and
Ireland holding vast stocks of Connectix product brands
- Connectix Cabling System, Enhanced Net 5, Net 6,
Optix, Rax and Networx. We endeavour to ensure that
we have the product you want in stock at all times.
Distribution
Our commitment to meet your needs is primary and we
have a fleet of vehicles that can reach your delivery
destination on the same day or next day. This service is
also backed up with the support of renowned
international carriers.
Training
Connectix Training Centres are located in England and
Ireland to serve the communications market. The centres
include fully equipped installation rooms giving delegates
‘real life’ practical experience. All accredited installers have
attended various Connectix Training Courses to ensure
their work is to the highest standard and in line with
industry regulations. Training courses are available in
copper, fibre, voice, wireless and ethernet.
Support
Connectix thrive on exceeding customer requirements.
We have specialist personnel with a high level of expertise
in each individual product category, to ensure that your
technical queries are answered. This dedication is also
matched by our sales team, offering excellent pre and post
sales support for a fast and efficient customer service.
Structured
Cabling System
Features & Benefits
Manufactured by Connectix in the UK
Over 10 million points already installed
Product and System Warranty available
Connectix Cabling Installation Courses
Available
Available in unshielded and shielded formats
Enhanced Net 5 System exceeds EIA/TIA
Enhanced category 5 Specifications
Net 6 System exceeds EIA/TIA category 6
specifications
Connectix Cabling Systems offer various services to
complement the range of products.
These services include an Approved Installer
Programme, Structured Cabling Installation Courses and
System Product Warranty options.
Since it was formed in 1993, Connectix has become
one of the UK’s leading manufacturers of networking
systems for data and voice. Thanks to an experienced
team of committed networking specialists with a
dynamic approach to product development and
customer service, Connectix has achieved significant
success in the industry. The original Net 5 cabling
system was designed and developed in 1994, and as
standards have developed so has the Connectix
product range; firstly with the introduction of Enhanced
Category 5 products and more recently with the
Category 6 system.
Approved Installer Programme
Installation companies committed to Connectix Cabling Systems can
be recognised and acknowledged as Approved Installers.
Connectix Approved Installers are certified to carry out installation and
testing work to an extremely high standard and are issued with an
approval certificate.
All Connectix Approved Installers have attended the Connectix
Structured Cabling Installation Course, which provides project
managers and installation engineers with the skills required for
installing, testing and verifying data communication networks.
Cabling Installation Course
Connectix Training offers a range of Cabling Installation Courses
explaining the essential practices associated with cabling installation.
The courses outline topics such as industry standards, LAN
topologies and an overview of structured cabling. Each delegate is
issued with a Certificate of Competence upon successful completion
of an examination.
System and Product Warranty
Connectix Cabling Systems can be warranted to guarantee network
performance and the reliability of the products. Upon completion of
the installation of a Connectix Cabling System the system can be
tested and verified to perform to the relevant standards ensuring
complete piece of mind for the client.
The Connectix design team is constantly anticipating
market and technological trends to bring innovative
products to market in the shortest possible time. The result
– one of the most comprehensive ranges of networking
systems available. And, to ensure long life performance and
reliability, Connectix Cabling Systems are manufactured
from top quality components to the highest specifications.
With over 10 million points installed Connectix are well on
their way to becoming the UK’s largest manufacturer of
cabling products. Connectix Cabling Systems have been
installed in over 50 000 sites, with many leading companies
already benefiting from Connectix cabling installations.
Connectix commitment to innovative design and
development ensures all customers receive the very best
integrated Cabling systems for their specific needs.
Every business is different, which is why Connectix Cabling
Systems can be individually designed and installed by a
Connectix Approved Installer. Individual planning ensures
that every company that chooses Connectix receives the
ideal infrastructure for their unique requirements.
3
Lifetime
Warranty
nnectix •
o
C
r fo r m a n c
e
L i fe t i m e
Pe
Wa
•
r ra n t y
Features & Benefits
Any Connectix Cabling System installed and tested
by a Connectix Approved Installer can be guaranteed
to perform to the relevant standard for the life of the
network, with The Connectix Cabling System
Lifetime Warranty.
Based on strength in product design, quality
manufacture and specialist installation, every user of a
Connectix Cabling System is assured of long-term
performance, reliability and guaranteed peace of mind
The procedure for issuing a warranty has been designed
to be quick and easy, with minimal paperwork for the
installer. On approval, a certificate is issued for the
Installer to present to the End User, confirming that the
site is covered by the Connectix Lifetime Warranty.
Both Enhanced Category 5 and Category 6 Warranties
are available, encompassing the wide range of Connectix
Cabling System products.
4
Guaranteed System Performance for
the life of the network
Simple application process - all
administration completed by Net 5 Ltd.
"Fast Track" warranties available to
Approved Installers
Connectix Structured Cabling
Installation and Warranty Testing
Course available
Approved Installer
Programme
Features & Benefits
Approved Installers can carry out testing
of their own Connectix Cabling Systems
Installations
Connectix Approved Installers are fully
trained and have attended a Connectix
Structured Cabling System Installation
Course
Approval status improves company profile
Promotional literature and ongoing
technical support for all Connectix
products
Approv
ed Insta
ller
to:
Issued
Sample
Client
y
compan rk
wo
named
above ion & testing
y that the
tallat
such
to certif carry out ins
and as
This is
to
ndard
install
en found mely high sta 5 Limited to
be
ve
ha
tre
Net
stems.
of an ex approved by
sy
ng
en
5 cabli
have be d certify Net
an
xx
ber: xx
tion Num
Registra
Systems
Cabling
nnectix
lf of Co
on beha
Signed
Date
.
gland No
ed in En
Register
00
6 3466
e 0137
5 Phon
319946
To maintain the highest levels of quality, Connectix
ensure that every company who installs Connectix
products has access to the right support; from
training, to up to date knowledge of industry
standards and trends. Connectix has trained over
5000 installation engineers and have in excess of 150
Approved installers.
To gain Approved status, Connectix installers must be
fully trained in installation practices and show excellence
throughout all aspects of their business. The creation of
long-term, mutually beneficial partnerships with installers
ensures all Connectix Cabling Systems are installed with
confidence.
Connectix monitor and review the work carried out by
Approved Installers to ensure that the highest standards
are maintained. The Connectix Approved Installer status
enhances an organizations reputation within the
structured cabling industry and emphasises to the end
user that the required level of expertise has been
reached.
A Connectix Cabling System designed and installed by a
Connectix Approved Installer will provide the optimum
infrastructure to meet present and future communication
needs – with guaranteed reliability and the capacity to
handle the demands of the future.
5
Custom
Colour Service
Features & Benefits
Easy designation for different zones
Separate different services such as
ISDN or voice
Enhance corporate branding
Match colour schemes
Connectix Cabling System 24 way High Density
Patch Panels are available from stock in a range of
12 colours.
Connectix cable rings are available in colours to match or
contrast with the range of coloured panels.
Module doors can also be produced in any colour to
allow for designation of different services or wiring
schemes.
Connectix Cabling System Faceplates can be custom
manufactured in any colour to meet specific customer
requirements.
6
Custom
Logo Service
Features & Benefits
Fast turnaround
Additional service to offer end users
Exceptional print quality
Free samples available - email your
logo to: [email protected]
Connectix are now able to offer the service of
customised branding for all Connectix Cabling
System panels, modules and faceplates. This service
gives you the opportunity to personalise your
products and if installed in public places are the ideal
way to have your corporate logo seen.
Symbols such as computers or telephones are available
for printing in any colour onto module doors, making the
ports easy to identify.
When used in conjunction with the custom colour range
of products you are able to have a completely unique
cabling system.
7
4000 Series
Shuttered Outlet
Features & Benefits
High Density, Single Gang 4 Port
Category 6 and Enhanced Category 5
versions
Unused jacks protected by shutters
Designed for direct wall mounting
Custom logo service available
Performance does not have to be bulky, and the
Connectix 4 Way Shuttered Wall outlet proves it.
Available for Category 6 and Enhanced Category 5
Systems, these 4 Way Shuttered Outlets combine
high performance, high density and shutter
protected sockets in a single gang package.
Like the other Wall Outlets in the Connectix 4000 Series,
they are extremely quick and easy to install. Just attach
the base plate, snap in the PCB, punch down the cables
and install the cover. Gone are the problems of installing
modules into a faceplate and pushing excess wires in a
back box.
Designed for direct wall mounting with top entry Mini
Trunking, an optional spacer plate allows for side and
bottom cable entry. In addition, they fit over standard
back boxes to provide maximum mounting flexibility.
With 4 ports in a single gang box there is no other
product offering the same combination of performance
and packaging density.
8
Ordering Information
Product Description
Part Number
4015 Cat 6, 4 Way Shuttered Outlet
4010 Enhanced Cat 5, 4 Way Shuttered Outlet
4100 Entry Spacer plate
008-001-010-01
008-001-010-05
008-001-013-01
Specification
Width
Depth
Height
Spacer Plate Depth
Material
Finish
IDC Blocks
PCB
Conforms to
87mm
27mm
87mm
8mm
ABS thermoplastic resin, with grade
UL94 VO at 1.5mm flame retardancy
High Gloss
4 Way Industry Standard IDC blocks
1.6mm double sided PTH Boards
4015: TIA/EIA-568-B.2-1
Category 6 Specification
4010: TIA/EIA-568-B Enhanced
Simple Assembly Sequence
4000 Series
Vertical Outlet
Features & Benefits
Enhanced Category 5 Performance
No protruding leads
Also available in a 2 Port version
Product Description
Part Number
4020, 4 Way Vertical Wall Outlet
4022, 2 Way Vertical Wall Outlet
008-001-011-01
008-001-011-03
008-001-013-01
Specification
Width
Depth
Height
Spacer Plate Depth
Material
Finish
IDC Blocks
PCB
Conforms to
87mm
27mm
87mm
8mm
High Gloss
TIA/EIA-568-B Enhanced
The 4020 Vertical Wall Outlet offers Enhanced
Category 5 performance in a high-density package.
The position of the sockets allows for a compact
installation without protruding leads.
the base plate, snap in the PCB, punch down the cables
and install the cover. Gone are the problems of installing
modules into a faceplate and pushing excess wires in a
back box.
Trunking, an optional spacer plate allows for side cable
entry. In addition, they fit on standard back boxes to
provide maximum mounting flexibility.
9
4000 Series
Tamperproof Outlet
Features & Benefits
Tamperproof design
Enhanced Category 5 Performance
Patent Pending
Originally designed for the education sector, these
high-density Enhanced Category 5 Outlets restrict
the user’s access to the patch lead. This eliminates
one of the most common causes of network
problems and will give the Network Administrator
one thing less to worry about.
Product Description
Part Number
4030, 4 Way Tamperproof Wall Outlet
008-001-012-01
008-001-013-01
Specification
Offering the same performance as the 4020, the 4030
outlet has the added benefit that leads cannot be
unplugged without removing the cover, thus increasing
system integrity.
the base plate to the wall, snap in the PCB, punch down
the cables and install the cover. Gone are the problems
of installing modules into a faceplate and pushing excess
wires in a back box.
Trunking, an optional spacer plate allows for side cable
entry. In addition, they fit over standard back boxes to
provide maximum mounting flexibility.
With 4 ports in a single gang box there is no other
product offering the same combination of density and
security.
10
Width
Depth
Height
Spacer Plate Depth
Material
Finish
IDC Blocks
PCB
Conforms to
87mm
27mm
105mm
8mm
High Gloss
TIA/EIA-568-B Enhanced
4000 Series 5 Port
Ethernet Switch
Features & Benefits
Wirespeed 5 port Auto-Negotiating
switch
IEEE 802.3 Standards (Broadcom chip)
CE mark and FCC safety standards
Auto MDI/MDI-X – no crossover cables
Replaces any standard single gang
87mm x 87mm Outlet
The Connectix Active 4000 outlets offer four active
Ethernet ports in a stylish neat single gang outlet.
The IDC uplink version is the ideal solution for upgrading
an existing single data outlet to four ports. By removing
the old outlet and re-terminating the existing cable into
the Active 4000 extra ports can be added without the
disruption of running new cables.
The RJ45 uplink version has been designed for quick and
easy connection. This switch can either be used as a 5
port stand-alone switch or an extension from another
switch (or outlet)
Specification
Standards Compliance
Interface
Switch Performance
Led Indicators
Dimensions
Environment
Power Supply
EMI & Safety
IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-TX Fast Ethernet
4 x RJ45 10/100 autosensing
1 x RJ45/IDC 10/100Mbps
autosensing Uplink
Wirespeed
Per Port: LNK/ACT; illuminated
when successfully connecting
with compliant device
Per Unit: PWR; Illuminated
when power supply is connected
87 x 87 x 28mm (HxWxD)
0° to 45°C (32° to 113°F)
External Power supply included
Input: 240V AC BS136A
Output: 12V DC 0.8A
Frequency: 47Hz to 63Hz
FCC Class B, cUL, UL & CE approved
Both products in this range are the same size as a
standard faceplate (87mm x 87mm), and will fit over
existing back boxes making installation is quick and easy.
Additional features include auto negotiation between 10
and 100 Mbps; Auto MDI/MDIX, eliminating the need for
crossover cables and blue led activity lights for each port.
Product Description
Active 4000 RJ45
Active 4000 IDC
Part Number
010-200-001-05
010-200-001-01
11
Category 6
UTP Module
Features & Benefits
Category 6 performance
Manufactured in the UK
Unique colour coded saddles allow
quick and accurate installation
Industry standard IDC's
Top quality high performance
TYCO sockets
Individually QA tested
Category 6 modules provide the performance
needed for present and next generation data
communications networks and applications,
including Gigabit Ethernet. The use of next
generation components and specially designed
boards allow a bandwidth of 250 MHz to be
achieved.
Category 6 modules, can be fitted into Single or Dual
faceplates and can be combined with quarter blanks
and/or voice modules to provide the required
configuration. Their attractive high gloss finish and easy
to use labelling system make them popular with both
installers and end users alike. Installation is made easy
with the unique colour coded cable saddle and the use
of industry standard IDC's.
Connectix Category 6 modules are full compliant with the
EIA/TIA Category 6 standard. When used in conjunction
with Category 6 patch panels and UTP cable the user will
get a link performance exceeding the Category 6
requirements.
Product Description
Category 6 UTP RJ45 Module
Standard Single Gang Faceplate
Standard Dual Gang Faceplate
Elite Standard Single Gang Faceplate
Elite Standard Dual Gang Faceplate
1⁄4 Blank
Specification
Width
Depth
Height
Faceplate Depth
Back-box Depth
Mounting Hole Size
Material
Finish
IDC Labels
Cable Guide
Sockets
IDC Blocks
PCB
Conforms to
25mm
35mm
50mm
15mm
Minimum 24mm recommended
25.40mm x 47.80mm
Polycarbonate/ABS thermoplastic resin with
grade UL94 VO at 1.5mm flame retardency
High Gloss
Individual colour coded labels
Individual cable saddles with cable tie
position for left or right cable entry
High Performance TYCO unshielded vertical jacks
4 Way Industry standard IDC blocks
1.6mm double sided PTH boards
TIA/EIA-568-B.2-1 Category 6 Specification
The Category 6 module is identical in appearance to
other modules in the Connectix Cabling Systems range,
making a seamless transition to Category 6 a reality.
Elite Faceplates
12
Part Number
008-001-001-35
008-001-002-05
008-001-003-05
008-001-002-01
008-001-003-02
008-001-004-05
Category 6
LJ6C Module
Features & Benefits
Industry standard LJ6C size
Unique colour coded saddles allow
quick and accurate installation
Industry standard IDC's
TYCO sockets
Product Description
Category 6 LJ6C Module
LJ6C Single One Gang Faceplate
LJ6C Dual One Gang Faceplate
LJ6C Quad Two Gang Faceplate
Quad Panel for Ackerman Floorbox
LJ6C Blank
For metal faceplates please see page 34.
Part Number
008-001-001-14
008-009-001-00
008-009-002-00
008-009-004-00
008-011-001-06
008-001-004-07
Specification
Width
Depth
Height
Back-box Depth
25mm
35mm
38.5mm
Minimum 30mm with panel,
24mm with faceplate
Mounting Hole Size
22.3mm x 36.7mm
Panel Thickness
2.0mm Max
Material
Finish
High Gloss
IDC Labels
Individual colour coded labels
Cable Guide
Sockets
High Performance TYCO unshielded vertical jacks
IDC Blocks
4 Way Industry standard IDC blocks
PCB
Conforms to
Category 6 modules provide the performance
including Gigabit Ethernet. The use of next
boards allow a bandwidth of 250MHz to be achieved.
Category 6 LJ6C modules are ideal for use in floorboxes,
or any application that has an industry standard LJ6C
aperture. Single and dual gang faceplates are available
for up to four LJ6C modules in addition to panels suitable
for Ackerman floorboxes. Their attractive high gloss finish
and easy to use labelling system make them popular with
both installers and end users alike. Installation is made
easy with the unique colour coded cable saddle and the
use of industry standard IDC's.
Connectix Category 6 modules are fully compliant with
the EIA/TIA Category 6 standard. When used in
conjunction with Category 6 patch panels and UTP cable
the user will get a link performance exceeding Category
6 requirements.
13
Category 6
Patch Panels
Features & Benefits
Unique colour coded saddles allow quick
and easy termination
Accepts Connectix Cable Tidy Rings
sockets
Panel shown with optional
cable rings (see page 36)
Category 6 high-density patch panels provide the
performance needed for present and next generation
data communications networks and applications,
including Gigabit Ethernet. The high-density format
is ideal where cabinet space is at a premium.
They are available in 1u 24 port and 2u 48 port formats
and can be customised up to 144 way (6U). Category 6
high-density panels achieve optimum transmission
performance by incorporating the highest quality
components and innovative on-board compensation
techniques. The front of the panel features the same
popular labelling method and cable ring slots as the
Category 5 Enhanced patch panel. The rear utilises
colour coded cable saddles and hook and loop retainers.
We also offer Category 6, 16 Way Panels.
All Connectix Category 6 high-density panels are fully
compliant with the EIA/TIA Category 6 standard. When
used in conjunction with Category 6 Modules and UTP
cable the user will get a link performance exceeding
Category 6 requirements.
Our Category 6 patch panels are identical in appearance
to the other panels in the Connectix Cabling Systems
range making a seamless transition to Category 6 a
reality.
14
Product Description
Category
Category
Category
Category
Category
6
6
6
6
6
High Density 24 way UTP panel
High Density 48 way UTP panel
16 way UTP panel
32 way UTP panel
48 way UTP panel
Part Number
009-001-004-30
009-001-005-30
009-001-001-30
009-001-002-30
009-001-003-30
Specification
Width
Depth
Height
Material
Finish
Socket Labels
IDC Labels
Cable Guide
Sockets
IDC Blocks
PCB
Conforms to
19” (483mm)
35mm
24 Way 1u (44mm), 48 Way 2u (88mm)
Aluminium alloy 6063 HE9/50s to BS1474
Black powder coat to BS6496
9mm numbered, with acetate cover
Individual colour coded labels to EIA 258A/568B
position for left or right cable entry.
Hook and loop cable retention tapes at either end.
TYCO unshielded vertical jacks
Groups of 4 identical circuits on 1.6mm
double sided PTH board
Category 6
UTP Solid Cable
Features & Benefits
Category 6 Performance
UL Tested
Every box individually tested in the UK
Supplied metre marked for easy
installation
Performance exceeding Category 6
specifications
Product Description
Category 6 UTP Solid Cable
Category 6 UTP LSZH Solid Cable
Part Number
001-003-005-00
001-003-005-60
Specification
Inner Conductor
Insulation
Construction
Colour Code
0.575mm plain copper
HD Polyethylene
4 twisted pairs cabled together with spline
Pair 1: White/Blue-Blue/White
Pair 2: White/Orange-Orange/White
Pair 3: White/Green-Green/White
Pair 4: White/Brown-Brown/White
Jacket
Polyvinyl chloride or Low Smoke Zero Halogen
Overall Diameter
6.4mm
Weight (Kg/Km)
39.1 (PVC)/41.2.4 (LSF)
Min Bending Radius Installation
50mm
Min Bending Radius Installed
25mm
Impedance
100 Ohm +/- 15 Ohm
Capacitance
50 pF/m
Conductor Loop Resistance
30 Ohm/100m
Velocity Ratio
66%
Operating Temp
20°C - 60°C
Installation Temp
0°C - 50°C
Conforms To
Category 6 unshielded twisted pair cable is designed
for use in next generation data communications
networks, and will comfortably support all present
applications including Gigabit Ethernet.
Category 6 UTP solid cable offers the performance
characteristics required by the emerging Category 6
standard. When used in conjunction with Category 6
modules and patch panels the user will get a link
performance exceeding Category 6 requirements.
15
Category 6
Patch Leads
Features & Benefits
Individually tested up to 250MHz
Available in lengths from 0.5 to 5 metres
All Connectix Cat 6 leads fully confirm
to EIA/TIA-568-B.2 Annex F
Individual test reports available at a
nominal fee
Connectix Category 6 Leads are designed to exceed
the performance requirements of the EIA/TIA
Category 6 patch lead specification.
Cat 6 UTP Patch Lead
Colour Length Part Number
(metre)
Each lead is individually factory tested to the
standard to ensure true Category 6 compatibility.
Connectix Category 6 Patch Leads are made from
Category 6 stranded cable and are terminated using
High Performance modular plugs. We stock a variety
leads in lengths from 0.5 to 5 metres, available in a
number of different colours.
If required Category 6 Patch Leads can be supplied
with individual test reports on CD-ROM for a nominal
fee.
Specification
Plug
Cable
Conforms to
16
High Performance Modular Plug
Category 6 Stranded Cable
EIA/TIA-568-B.2 Annex F
Length
Part Number
(metre)
Grey
White
Blue
Green
Red
Yellow
Orange
Purple
Black
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
003-3B5-005-01
003-3B5-005-02
003-3B5-005-03
003-3B5-005-04
003-3B5-005-05
003-3B5-005-06
003-3B5-005-07
003-3B5-005-08
003-3B5-005-09
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
003-3B5-010-01
003-3B5-010-02
003-3B5-010-03
003-3B5-010-04
003-3B5-010-05
003-3B5-010-06
003-3B5-010-07
003-3B5-010-08
003-3B5-010-09
Grey
White
Blue
Green
Red
Yellow
Orange
Purple
Black
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
003-3B5-020-01
003-3B5-020-02
003-3B5-020-03
003-3B5-020-04
003-3B5-020-05
003-3B5-020-06
003-3B5-020-07
003-3B5-020-08
003-3B5-020-09
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
003-3B5-030-01
003-3B5-030-02
003-3B5-030-03
003-3B5-030-04
003-3B5-030-05
003-3B5-030-06
003-3B5-030-07
003-3B5-030-08
003-3B5-030-09
Grey
White
Blue
Green
Red
Yellow
Orange
Purple
Black
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
003-3B5-040-01
003-3B5-040-02
003-3B5-040-03
003-3B5-040-04
003-3B5-040-05
003-3B5-040-06
003-3B5-040-07
003-3B5-040-08
003-3B5-040-09
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
003-3B5-050-01
003-3B5-050-02
003-3B5-050-03
003-3B5-050-04
003-3B5-050-05
003-3B5-050-06
003-3B5-050-07
003-3B5-050-08
003-3B5-050-09
Category 6
FTP Module
Features & Benefits
Shielded design for improved EM
performance
Suitable for Gigabit Ethernet
applications and beyond
Colour coded saddle for quick and
accurate termination
Interchangeable with all other Standard
modules and quarter blanks
Easy to use shield connection
Product Description
Category 6 RJ45 FTP Module
1⁄4 Blank
Part Number
008-002-001-35
008-001-002-05
008-001-003-05
008-001-002-01
008-001-003-02
008-001-004-05
Specification
Width
Depth
Height
Faceplate Depth
Back-box Depth
Mounting Hole Size
Material
Finish
IDC Labels
Cable Guide
Sockets
IDC Blocks
PCB
Conforms to
25mm
34.5mm
50mm
15mm
25.40mm x 47.80mm
Polycarbonate/ABS thermoplastic resin, with
grade UL94 VO at 1.5mm flame retardancy
High Gloss
High Performance shielded vertical jacks
Industry Standard IDC blocks
Category 6 FTP Modules provide the performance
including Gigabit Ethernet, with the added benefit of
shielding to minimise the risk of EMI. The use of next
boards allow a bandwidth of 250MHz to be achieved
in a shielded package.
Category 6 FTP modules can be fitted into Single or Dual
faceplates and can be combined with quarter blanks
and/or voice modules to provide the required
configuration. Their attractive high gloss finish and easy
to use labelling system make them popular with both
installers and end users alike. Installation is made easy
with the unique colour coded cable saddle, the use of
industry standard IDC blocks and the simple to use
shield connection.
Category 6 FTP Modules are fully compliant with the
EIA/TIA Category 6 standards. When used in conjunction
with Category 6 FTP Patch Panels and FTP Cable the
user will get a link performance exceeding Category 6
requirements.
17
Category 6
FTP Patch Panel
Features & Benefits
Shielded design for improved EM
performance
applications and beyond
Colour coded saddle for quick and
accurate termination
Easy to use shield connection
Panel shown with optional
cable rings (see page 36)
Category 6 FTP Panels provide the performance
including Gigabit Ethernet, with the added benefit of
shielding to minimise the risk of EMI. The use of next
boards allow a bandwidth of 250MHz to be achieved
in a shielded package.
Available in 16, 32 and 48 way (and custom made up to
96 way), Category 6 FTP panels consist of industry
standard IDC blocks and high performance RJ45 jacks.
All sockets are commonly linked through the panel, and
can be grounded to the rack using the earth wire
provided.
The panels utilise specially designed and individually
labelled cable saddles to facilitate installation and
enhance cable management. The rear of the panel
features hook and loop cable retainers at either end.
Category 6 FTP Patch Panels are fully compliant with the
EIA/TIA Category 6 standards. When used in conjunction
with Category 6 FTP modules and FTP Cable the user
will get a link performance exceeding Category 6
requirements.
18
Product Description
Category 6 16 Way RJ45 FTP Panel
Part Number
009-002-001-30
009-002-002-30
009-002-003-30
Specification
Width
Depth
Height
Material
Finish
Socket Labels
IDC Labels
Cable Guide
Sockets
IDC Blocks
PCB
Conforms to
19” (483mm)
36mm
16 Way 1u (44mm), 32 Way 2u (88mm),
48 Way 3u (132mm)
9mm Numbered card, with acetate cover
Hook and loop cable retention tapes at either end
High Performance shielded vertical jacks
Individual 1.6mm double-sided PTH boards
Category 6
FTP Cable
Features & Benefits
Available with LSZH or PVC jacket
Foil Shielded
Metre marked for easy installation
Performance exceeds Category 6
requirements
Product Description
CCS Category 6 FTP PVC Solid Cable
CCS Category 6 FTP LSZH Solid Cable
Part Number
001-004-004-01
001-004-004-51
Specification
Inner Conductor
Insulation
Construction
0.55mm
HD Polyethylene
4 twisted pairs cabled together with spline
Double foil shield
Colour Code
Pair 1: White/Blue - Blue
Pair 2: White/Orange - Orange
Pair 3: White/Green - Green
Pair 4: White/Brown - Brown
Jacket
Polyvinyl chlorine or Low Smoke Zero Halogen
Overall Diameter
7.1mm
Weight (Kg/Km)
52kg / km
Min Bending Radius Operation
29mm
Min Bending Radius Installation
57mm
Impedance
100+/- 15 Ohms
Capacitance
56 pF/m
Loop Resistance
20 Ohms/100m
NVP
67
Operating Temp
-10 to +40°C
Installation Temp
-10 to +50°C
Conforms To
Connectix Cabling Systems Category 6 shielded
twisted pair cable is designed for use in next
generation data communication networks, and will
comfortably support all present applications
including Gigabit Ethernet.
CCS Category 6 solid cable offers the performance
characteristics required by the Category 6 standards in a
shielded format. The double foil shield simplifies
installation. The outer foil is removed with the jacket,
leaving the inner foil in place to facilitate grounding.
When used in conjunction with CCS Category 6 modules
and patch panels the user will get a link performance
exceeding Category 6 requirements.
19
Enhanced Category 5
UTP Module
Features & Benefits
applications
Unique colour coded saddle allows
quick and accurate terminations
Top quality sockets
Interchangeable with other modules
and 1⁄4 blanks
Enhanced Category 5 modules offer exceptional
performance for high speed LANs including Gigabit
Ethernet Applications. Optimum transmission has
been achieved by incorporating the highest quality
components and innovative on-board compensation
techniques.
The attractive high gloss finish and easy to use labelling
system make them popular with both installers and end
users alike. Installation is made easy with the unique
colour coded cable saddle and the use of industry
standard IDC's.
Enhanced Category 5 modules can be fitted into Single
or Dual Category 5 faceplates and can be combined with
quarter blanks and/or voice modules to provide the
required configuration.
Enhanced Category 5 modules offer extended
PowerSum characteristics and exceed the TIA/EIA-568B specifications. When combined with Enhanced
Category 5 patch Panels and UTP cable the link will
perform well in excess of the Enhanced Category 5
specification.
Product Description
Enhanced Category 5 UTP RJ45 Module
1⁄4 Blank
Specification
Width
25mm
Depth
35mm
Height
50mm
Faceplate Depth
15mm
Back-box Depth
Mounting Hole Size
25.40mm x 47.80mm
Material
Polycarbonate / ABS thermoplastic resin, with
Finish
High gloss
IDC Labels
Individual colour coded labels to EIA258A/568B
Cable Guide
Sockets
Unshielded vertical jacks
IDC Blocks
PCB
Conforms to
TIA/EIA-568-B Enhanced Category 5 specification
Elite Faceplates
20
Part Number
008-001-001-25
008-001-002-05
008-001-003-05
008-001-002-01
008-001-003-02
008-001-004-05
Enhanced Category 5
Compact Module
Features & Benefits
Suitable for Gigabit Ethernet applications
Shallow design requires minimal backbox depth
Interchangeable with all other Connectix
modules and 1⁄4 blanks
Four styles of faceplates available
Also available as PABX secondary or full
master voice module
Product Description
Enhanced Category 5 Compact UTP RJ45 Module
Compact PABX Phone Module
Compact Secondary Phone Module
Compact Full Master Phone Module
Compact Single Gang Faceplate
Compact Dual Gang Faceplate
Elite Compact Single Gang Faceplate
1⁄4 Blank
Part Number
008-001-001-09
008-001-001-17
008-001-001-18
008-001-001-19
008-001-002-06
008-001-003-06
008-001-002-02
008-001-004-05
Specification
Width
Depth
Height
Faceplate Depth
Back-box Depth
Mounting Hole Size
Material
Finish
IDC Labels
IDC Blocks
PCB
Conforms to
25mm
21.5mm
50mm
9mm
25.4mm x 47.8mm
grade UL94 V0 at 1.5mm flame retardency
High gloss
The Enhanced Category 5 compact module is
designed to provide one of the shallowest wall
outlets on the market. They are the ideal solution
wherever back-box depth is a problem.
system are identical to all other Connectix Cabling
Systems Modules, making them interchangeable in most
applications.
Enhanced Category 5 Compact modules can be fitted
into Single or Dual gang faceplates and can be combined
with quarter blanks and/or voice modules to provide the
required configuration.
Enhanced Category 5 Compact modules offer extended
specification.
This product is also available in various voice
configurations.
Elite Faceplates
21
Enhanced Category 5
LJ6C Module
Features & Benefits
Shallow design requires minimal backbox depth
Industry Standard LJ6C size
Industry Standard IDC’s
The Enhanced Category 5 compact LJ6C module is
designed to provide one of the shallowest outlets on
the market. They are the ideal solution wherever
back box depth is a problem.
LJ6C modules are ideal for use in floorboxes, or any
application that has an industry standard LJ6C aperture.
Single and dual gang faceplates are available for up to
four LJ6C modules in addition to panels suitable for
Ackerman floorboxes. Their attractive high gloss finish
and easy to use labelling system make them popular with
both installers and users alike.
Installation is made easy with individual colour codes and
the use of industry standard IDC’s.
Enhanced Category 5 LJ6C modules offer extended
powersum characteristics and exceed the TIA/EIA-568B specifications. When combined with Enhanced
specification.
22
Product Description
Enhanced Category 5 LJ6C Compact Module
Single LJ6C Single Gang Faceplate
Dual LJ6C Single Gang Faceplate
Quad LJ6C Dual Gang Faceplate
Quad Panel for Ackerman Floor Box
For metal faceplates please see page 34
Part Number
008-001-001-20
008-009-001-00
008-009-002-00
008-009-004-00
008-011-001-06
Specification
Width
Depth
Height
Back-box Depth
25mm
19.5mm
38.5mm
Minimum 20mm with panel,
15mm with faceplate
Mounting Hole Size
22.3mm x 36.7mm
Panel Thickness
2.0mm Max
Material
Finish
High Gloss
IDC Labels
Individual Colour code
IDC Blocks
4 Way Industry Standard IDC Blocks
PCB
Conforms to
TIA/EIA-568-B Enhanced Category 5 Specification
Enhanced Category 5
Patch Panels
Features & Benefits
Individual colour coded saddles allow
Top quality sockets
Fully QA tested
Panel Shown with optional cable rings (see page 36)
Product Description
Enhanced Category
24 way UTP Panel
Enhanced Category
48 way UTP Panel
Enhanced Category
Enhanced Category
Enhanced Category
Part Number
5 High Density
009-001-004-20
5 High Density
009-001-005-20
5 16 way UTP RJ45 Panel
009-001-001-20
009-001-002-20
009-001-003-20
Specification
Width
Depth
Height
Material
Finish
Socket Labels
IDC Labels
Cable Guide
Sockets
IDC Blocks
PCB
Conforms to
19” (483mm)
35mm
24 Way 1u (44mm), 48 Way 2u (88mm)
9mm numbered card with acetate cover
position for left or right cable entry.
Hook and loop cable retention at either end.
Unshielded vertical jacks
Groups of 4 identical circuits on 1.6mm
double sided PTH boards
Enhanced Category 5 high-density patch panels
provide exceptional performance for high speed
LANs including Gigabit Ethernet applications. The
high-density format is ideal where cabinet space is at
a premium. They are available in 1U 24 port and 2U
48 port formats and can be customised up to 144
way (6U).
Enhanced Category 5 high-density panels achieve
optimum transmission performance by incorporating the
highest quality components and innovative on-board
compensation techniques. The front of the panel features
the same popular labelling method and cable ring slots
as the Enhanced UTP Patch Panel. The rear utilises
colour coded cable saddles and hook and loop cable
retainers. We also offer Enhanced Categry 5 UTP 16,32
& 48 way Patch Panels.
All of our Enhanced Category 5 Panels offer extended
Category 5 modules and UTP cable the link will perform
well in excess of the Enhanced Category 5 specification.
23
Modular
Patch Panel
Features & Benefits
Mix and Match Copper, Fibre and
ISDN in one panel
applications
Easy and neat cable management
Accept Connectix Cable Tidy Rings
Fully QA tested
The Connectix Cabling System modular panel range not
only provides exceptional performance for high speed
copper LANs including Gigabit Ethernet applications, but
has the added versatility of offering fibre and ISDN
options. The flat modular design provides easier cable
management and the high port density (up to 24 RJ45
ports in 1U) is ideal where cabinet space is at a premium.
The front of the panel features the same popular labelling
method and cable ring slots as the other panels in the
Connectix product range. These panels save the cost of an
additional cable management tray, reduce installation time and
facilitate neat, professional and well-managed cable routing.
Enhanced Category 5 high-density 4 way modules
achieve optimum transmission performance by
incorporating the highest quality components and
innovative on-board compensation techniques. The
extended PowerSum characteristics exceed the TIA/EIA568-B specifications. When combined with Enhanced
Category 5 modules and UTP cable the link will perform
well in excess of the Enhanced Category 5 specification.
4 way ST and 2 Way SC fibre modules are also available,
with gland hole compatible with Optix Opal assemblies. The
fibre modules include a management tray complete with
cable clips. A 4 way ISDN bus module is also available.
Blank modules may also be included to allow for future
expansion.
24
Product Description
Part Number
24 port RJ45 Enhanced Category 5 Modular Panel
Unloaded Modular Panel
4 Port RJ45 Enhanced Category 5 Module
4 Port ISDN Module
4 Port ST Module
2 Port SC Module
Blank Module
009-001-001-50
009-001-040-20
009-001-040-05
009-001-040-06
009-001-040-08
009-001-040-09
009-001-040-10
Specification
Width
Depth
Height
Material
Finish
Socket Labels
Cable Management
Capacity
19" (483mm)
140mm
1U (44mm)
Matt black polyester paint
Improved cabling facility with individual
cable tie positions to give controlled cable
bending and access for left or right cable entry
Any 6 modules or blanks (up to 24 way)
4 way Enhanced Category 5 Module
IDC Labels
Colour coded to EIA 258A/568B
IDC Blocks
Industry Standard 4 way IDC's
Conforms to
Fibre Modules
Connector Options
Overall Depth
Gland Hole Size
4 way ST or 2 way SC
460mm
21mm
2020 Series High
Density Panel
Features & Benefits
Manufactured in UK
Easy to install
Simple cable management
Suitable for gigabit Ethernet Applications
Adjustable recessed mounting version
available
Product Description
2020 Series High Density Panel
2020 Series High Density Panel (Adjustable)
Part Number
009-001-001-01
009-001-001-02
Specification
Width
19” (483mm)
Depth
95mm
Height
1u (44mm)
Material
Mild Steel Sheet CR4 to BSEN 10130-1999 DC01
Finish
Matt Black Polyester Paint
Socket Labels
Write-on Silk Screen on Panel Front
Cable Management
Improved cabling facility with
easy to use cable tie positions for
left and right cable entry
IDC Labling
Colour Coded to EIA 258A/568B
IDC Blocks
Industry Standard 4 way IDC’s
Conforms to
The Connectix 2020 series panel is an alternative to
our Enhanced Category 5 High Density Patch Panel.
It offers the same Enhanced Category 5 performance
as our standard HD Panel but has been designed to
present the cable termination IDCs horizontally on a
tray at the rear of the panel, making termination and
cable management easier.
Enhanced Category 5 high Density panels achieve
optimum transmission performance by incorporating
highest quality components and innovative on-board
compensation techniques. The front of the panel features
write on designation labels, which also provide an ideal
surface for application of custom printed labels.
This panel offers extended PowerSum characteristics
and exceeds the TIA/EIA-568-B Specifications. When
combined with Enhanced Category 5 Modules and UTP
cable the link will perform well in excess of the Enhanced
Category 5 Specification.
25
Through Coupler
Panel
Features & Benefits
High Density, 24 ports in 1U
Enhanced Category 5 System
Performance
Custom Logo service available
Available in a range of colours
RJ45 to RJ45 connection
Offering Enhanced Category 5 System Performance,
these Through Coupler Panels feature 24 ports in 1U.
They offer the perfect solution when a panel
mounted high performance, high-density plug-toplug connection is required.
Designed to match the other panels in the Connectix
range they will accept the Connectix Cable Tidy Rings
ensuring the available rack space is used to the full.
Like all Connectix panels, the Through Coupler Panel is
available in a wide range of different colours.
A customised badgeing service is available.
26
Product Description
Enhanced Category 5 24 Way Through Coupler
Enhanced Category 5 48 Way Through Coupler
Part Number
009-001-019-02
009-001-019-03
Specification
Width
Depth
Height
Material
Finish
Socket Labels
RJ45 Sockets
PCB
Conforms to
19” (483mm)
35mm
24 Way 1u (44mm), 48 Way 2u (88mm)
Aluminium Alloy 6063 HE9/50s to BS1474
Black Powder Coat BS6496
9mm Numbered Card with Acetate Cover
Unshielded Vertical Jacks
Groups of 4 Identical Circuits on
Enhanced Category 5
UTP Solid Cable
Features & Benefits
UL tested to CM, CMX and CMH flame
tests
Supplied metre marked in Reelex boxes
for easy installation
Excellent performance exceeding TIA/EIA
Enhanced Category 5 specifications
Product Description
Enhanced Category 5 UTP Solid Cable
Enhanced Category 5 UTP LSZH Solid Cable
Enhanced Category 5 UTP Solid External Cable
Part Number
001-003-003-62
001-003-003-63
001-003-004-30
Specification
Inner Conductor
Insulation
Construction
Colour Code
0.52mm plain copper
High Density Polyethylene
4 twisted pairs cabled together
Pair 1: White/Blue-Blue/White
Pair 2: White/Orange-Orange/White
Pair 3: White/Green-Green/White
Pair 4: White/Brown-Brown/White
Jacket
Polyvinyl Chloride or Low Smoke Zero Halogen
Overall Diameter
5.0 +/- 0.2mm
Weight (Kg/Km)
31
Min Bending Radius
20mm
Impedance
1-100 MHz 100 Ohm +/- 12 Ohm - (Typical)
+/- 15 Ohm - (Max)
Capacitance
4.9 nF/100m - Typical 5.6 nF/100m - (Max)
DC Resistance 8.1 Ohm/100m - Typical 9.38 Ohm/100m - (Max)
Velocity Ratio
66%
Conforms To
Operating Temps
20˚C - 70˚C
Installation Temps
0˚C - 50˚C
Enhanced Category 5 Unshielded Twisted Pair cable
is designed for High Speed LANs including Gigabit
Ethernet Applications.
When used with Enhanced Category 5 Panels and
Modules it gives the exceptional performance required
for transmission over all four pairs.
The cable is supplied in easy to use Reelex boxes and is
available with standard grey PVC or purple LSZH outer
sheath.
27
Enhanced Category 5
Patch Leads
Features & Benefits
Conforms fully to TIA/EIA-568-B.2
Lengths available from 0.5 to 5 metres
Available in nine different colours
Each lead is individually tested
Plugs conform to ISO8877
Connectix Enhanced Category 5 have been designed
to exceed the performance criteria set for Enhanced
Category 5 patch cords, as stated EIA/TIA-568-B.
Cat 5e UTP Patch Lead
Colour Length Part Number
(metre)
These leads are made from Enhanced Category 5
stranded cable and are terminated using high
performance modular plugs. We stock a variety of
booted and un-booted leads in lengths from 0.5 metres
up to 5 metres, available in any of our nine different
colours of cable. FTP leads are also available in a wide
range of lengths and colours.
Specification
Plug
Cable
Conforms to
28
High Performance Modular Plug
Enhanced Category 5 Stranded Cable
TIA/EIA-568-B.2 Annex F
Length Part Number
(metre)
Grey
White
Blue
Green
Red
Yellow
Orange
Purple
Black
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
003-3NB4-005-01
003-3NB4-005-02
003-3NB4-005-03
003-3NB4-005-04
003-3NB4-005-05
003-3NB4-005-06
003-3NB4-005-07
003-3NB4-005-08
003-3NB4-005-09
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
003-3NB4-010-01
003-3NB4-010-02
003-3NB4-010-03
003-3NB4-010-04
003-3NB4-010-05
003-3NB4-010-06
003-3NB4-010-07
003-3NB4-010-08
003-3NB4-010-09
Grey
White
Blue
Green
Red
Yellow
Orange
Purple
Black
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
003-3NB4-020-01
003-3NB4-020-02
003-3NB4-020-03
003-3NB4-020-04
003-3NB4-020-05
003-3NB4-020-06
003-3NB4-020-07
003-3NB4-020-08
003-3NB4-020-09
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
003-3NB4-030-01
003-3NB4-030-02
003-3NB4-030-03
003-3NB4-030-04
003-3NB4-030-05
003-3NB4-030-06
003-3NB4-030-07
003-3NB4-030-08
003-3NB4-030-09
Grey
White
Blue
Green
Red
Yellow
Orange
Purple
Black
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
003-3NB4-040-01
003-3NB4-040-02
003-3NB4-040-03
003-3NB4-040-04
003-3NB4-040-05
003-3NB4-040-06
003-3NB4-040-07
003-3NB4-040-08
003-3NB4-040-09
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
003-3NB4-050-01
003-3NB4-050-02
003-3NB4-050-03
003-3NB4-050-04
003-3NB4-050-05
003-3NB4-050-06
003-3NB4-050-07
003-3NB4-050-08
003-3NB4-050-09
Enhanced Category 5
FTP Module
Features & Benefits
applications
Unique colour coded saddle allows
Top quality sockets
Interchangeable with all other
Category 5 modules and 1⁄4 blanks
Easy to use drain wire connection
Product Description
Enhanced Category 5 RJ45 FTP Module
1⁄4 Blank
Part Number
008-002-001-00
008-001-002-05
008-001-003-05
008-001-002-01
008-001-003-02
008-001-004-05
Specification
Width
Depth
Height
Faceplate Depth
Back-box Depth
Mounting Hole Size
Material
Finish
IDC Labels
Cable Guide
Sockets
IDC Blocks
PCB
Conforms to
25mm
34.5mm
50mm
15mm
25.40mm x 47.80mm
High gloss
Shielded vertical jacks
Enhanced Category 5 FTP modules offer exceptional
performance for high speed LANs including Gigabit
Ethernet Applications, with the added benefit of
offering a shielded design. Optimum transmission
has been achieved by incorporating the highest
quality components and innovative on-board
compensation techniques.
system make them popular with both installers and end
users alike. Installation is made easy with the unique
colour coded cable saddle and the simple to use drain
wire connection.
Enhanced Category 5 FTP modules can be fitted into
Single or Dual Category 5 faceplates and can be
combined with quarter blanks and/or voice modules to
provide the required configuration.
Enhanced Category 5 FTP modules offer extended
Category 5 FTP patch Panels and FTP cable the link will
specification.
Elite Faceplates
29
Enhanced Category 5
FTP Patch Panel
Features & Benefits
Individual colour coded saddles allow
Accept Connectix Cable Tidy Rings
Top quality sockets
Fully QA tested
Panel Shown with optional cable rings (see page 36)
Enhanced Category 5 FTP patch panels provide
exceptional performance for high speed LANs
including Gigabit Ethernet applications in an easy to
use format, with the added benefit offering a
shielded design.
Available in 16, 32 and 48 way (and custom made up to
96 way), Enhanced Category 5 FTP panels consist of
industry standard IDC connections and high quality RJ45
jacks. All sockets in the panel are commonly linked
through the panel, and can be grounded to the rack
using the earth wire provided.
The panels utilise specially designed individually labelled
cable saddles to facilitate installation and enhance cable
management. The rear of the panel features cable
retainers at either end for bundling cables making them
extremely popular with installers. Cable management can
be enhanced further with the use of the optional cable
management tray. Each RJ45 port is numbered with a
removable identification label, protected by an acetate
strip.
Enhanced Category 5 FTP panels offer extended
Category 5 FTP modules and FTP cable the link will
specification.
30
Product Description
Enhanced Category 5 16 Way RJ45 FTP Panel
Part Number
009-002-004-16
009-002-004-32
009-002-004-48
Specification
Width
Depth
Height
Material
Finish
Socket Labels
IDC Labels
Cable Guide
Sockets
IDC Blocks
PCB
Conforms to
19” (483mm)
36mm
16 Way 1u (44mm), 32 Way 2u (88mm),
48 Way 3u (132mm)
9mm Numbered card, with acetate cover
Hook and loop cable retention tapes at either end
Shielded vertical jacks
Individual 1.6mm double-sided PTH boards
Enhanced Category 5
FTP 2020 Panel
Features & Benefits
Easy to install
Suitable for gigabit Ethernet
applications
High Density 24 Port
Rear Cover to protect termination and
improve shielding
Product Description
2020 Series FTP 24 way FTP Panel
Part Number
The Connectix 2020 series FTP panel is an
alternative to our standard Enhanced Category 5 FTP
Patch Panel.
009-002-001-01
Specification
Width
19” (483mm)
Depth
98mm
Height
1u (44mm)
Material
Mild Steel Sheet CR4 to BSEN 10130-1999 DC01
Finish
Matt Black Polyester Paint
Socket Labels
Write-on Silk Screen on Panel Front
Cable Management
Improved cabling facility with easy to use
cable tie positions for left and right cable entry
IDC Labling
Colour Coded to EIA 258A/568B
IDC Blocks
Conforms to
It offers the same Enhanced Net 5 performance as our
standard FTP panel but has been designed to present
the cable termination IDC’s horizontally on a tray at the
rear of the panel, making termination and cable
management easier.
Enhanced Category 5 panels provide exceptional
performance for high speed LAN’s including gigabit
Ethernet applications in an easy to use format.
All sockets in the panel are commonly linked through the
panel and can be grounded to the rack using the earth
wire provided.
When combined with Enhanced Category 5 FTP
modules and cable, the link will perform well in excess of
the enhanced category 5 specifications.
31
Enhanced Category 5
FTP Solid Cable
Features & Benefits
Supplied in Reelex™ boxes for easy
installation
Excellent performance - exceeding
TIA/EIA-568-B
Meter marked
Excellent Electro Magnetic Compatibility
24 AWG Solid Copper Cores
Enhanced Category 5 FTP cable is designed for high
speed LANs including Gigabit Ethernet Applications.
Product Description
When used with Enhanced Category 5 FTP modules and
panels it gives the exceptional performance required for
transmission over all four pairs.
Enhanced Category 5 FTP Solid Cable
Enhanced Category 5 FTP LSZH Solid Cable
Part Number
001-004-010-01
001-004-001-62
Specification
The cable is supplied in easy to use Reelex boxes and is
available with standard grey PVC, or Purple LSZH outer
sheath.
32
Inner Conductor
Insulation
Screen
0.52mm plain copper
0.91mm solid polyethylene
Overall aluminium / polyester type,
longitudinally applied, aluminium side in,
with a 0.40mm tinned copper drain wire
applied under the screen
Construction
4 twisted pair cables together
and wrapped in polyester tape
Colour Code
Pair 1: White/Blue - Blue
Pair 2: White/Orange - Orange
Pair 3: White/Green - Green
Pair 4: White/Brown - Brown
Jacket
PVC to BS6746 Type 6
or Low Smoke Zero Halogen
Overall Diameter
5.80 ± 0.30mm
Weight (Kg/Km)
38
Temperature Range
-20°C to +70°C
Impedance
100 Ohms ± 15 Ohms
Capacitance
46 pF/m
Inner Conductor
94 Ohms / km
Velocity Ratio
76%
Conforms To
Desktop
Outlets
Features & Benefits
8 way LJ6C Desktop Box
8 Shuttered outlets in single unit
Choice of cable entry points
Quick and Easy installation
Custom colours to order
Deskmount Pods
High density 4 or 6 way
Cat 5e or Cat 6
Custom colours to order
The 8 way LJ6C desktop box gives users the
capabilities of having high density usage, plus the
flexibility to move outlets without having to worry
about floorboxes or outlet points on the wall.
The unit fits neatly onto any worktop and has mounting
holes in the base to ensure it will stay firmly secured to its
surface.
Product Description
8
4
6
4
6
way
way
way
way
way
LJ6C Desktop Box
Cat5e Desk Mount Pod
Cat5e Desk Mount Pod
Cat6 Desk Mount Pod
Cat6 Desk Mount Pod
Part Number
008-009-004-08
009-034-000-00
009-036-000-00
009-043-000-10
009-043-000-20
Specification
Terminating the outlets in the box is quick and easy, once
the cable has been fed through the cable gland terminate
as usual, clip the outlet into place, once all the outlets are
in place, tighten the cable gland and the unit is ready for
use.
Desktop Box Size
Desk Pod Size
Material
Conforms to
135x103x103mm
135x45x60mm
Mild steel sheet CR4 to BSEN 130-1999DCO1
TIA/EIA-568-B Enhanced Category 5
or Category 6 specification
This unit has been designed specifically for use with the
Connectix Enhanced Category 5 LJ6C module, which
exceed the TIA/EIA-568-B specifications.
The 4 or 6 way desktop pod is a convenient high density
desk outlet. Incorporating industry standard IDC
connections in a robust steel enclosure. This unit is
suitable for a multitude of applications, including
underfloor transition points.
33
LJ6C Metal
Face Plates
Features & Benefits
Available in a wide range
of finishes
Designed to fit the Net 5
Enhanced LJ6C Module
Available in 7 different finishes
Single and Dual gang
faceplates are available
Also available unloaded
Our range of metal faceplates are ideal for installing
into situations where matching the surrounding
décor is important. This may mean that the Standard
white ABS face plates are unsuitable. These
faceplates have been designed specifically for the
Enhanced Net 5 Compact LJ6C module, they fit
perfectly onto flush wall mount back boxes.
The face plates are available in a wide selection of
finishes and all come in single, dual and 4 way variations
and are available from stock. The different finishes are;
Georgian Rope Edge Brass, Victorian Polished Brass,
Graphite, Brushed Steel, Mirror Chrome, Satin Chrome
and Iridium Black.
Finishes
Georgian Rope Edged Brass
Victorian Polished Brass
Mirror Chrome
Satin Chrome
Iridium Black
Graphite
Brushed Steel
Hand-polished pressed brass
Hand-polished pressed brass
Bright Nickel and Chromium
hand-polished pressed Steel plate
Satin Chrome plated hand-polished
pressed Steel Plate
Black Chrome plate hand-polished
pressed Steel Plate
Grey painted finish on Zintec plate
Matt Chrome finish achieved
using brushed Stainless Steel
Product Description
008-001-020-00
008-001-020-01
008-001-020-02
008-001-020-03
008-001-020-04
008-001-020-05
008-001-020-06
Dual Loaded One Gang
Georgian Rope Edge Brass faceplate
Victorian Polished Brass faceplate
Mirror Chrome faceplate
Satin Chrome faceplate
Iridium Black faceplate
Graphite faceplate
Brushed steel faceplate
008-001-014-00
008-001-014-01
008-001-014-02
008-001-014-03
008-001-014-04
008-001-014-05
008-001-014-06
Quad Loaded Two Gang
Graphite faceplate
Brushed Steel faceplate
008-001-030-00
008-001-030-01
008-001-030-02
008-001-030-03
008-001-030-04
008-001-030-05
008-001-030-06
Specification
Single
Double
34
Part Number
Single Loaded One Gang
Graphite faceplate
Brushed steel faceplate
Width
Depth
Height
91mm
151mm
91mm
91mm
9mm
9mm
Euro Faceplate
Adaptor
Features & Benefits
Fits Euro Style Faceplates
Compatible with Cat 5E and Cat 6 LJ6C
modules
Sleek subtle design
Allows use of a wide range of faceplates
with Connectix Cabling System products
Specification
Fits
Accepts
Material
Finish
50mm x 50mm Euro Style Aperture
2 LJ6C Modules
Polycarbonate / ABS thermoplastic Resin,
with grade UL94 V0 at 1.5mm flame retardency
High Gloss White
Product Description
Dual LJ6C to Euro Faceplate Adaptor
Part Number
008-009-005-00
Connectix Euro Faceplate Adaptor has been
designed to allow 2 Connectix LJ6C modules to be
mounted in a single gang Euro Style faceplate.
This is the ideal solution to situations where specific
faceplates are required to match switches and power
outlets. Two adaptors maybe used to house 4 LJ6C
modules in a dual gang Euro plate. The Euro Faceplate
Adaptor is compatible with Connectix Cabling System
Cat 5E and Cat 6 LJ6C modules.
35
Cable Tidy
Rings
The unique integrated cabling ring offers improved
patch lead management when used with Connectix
cabling system patch panels.
Features & Benefits
Excellent patch lead management
No need for additional cable tidy or
jumper ring panels
The adjustable rings slide into a specially designed slot
on the front of the patch panels, providing excellent
patch lead management and removing the need for
separate cable tidy panels.
Vertical or Horizontal cable routing
with one product
Maximises cabinet space
The rings can be positioned horizontally or vertically
resulting in neat professional installations where none of
the network equipment is obscured by patch leads.
Cabinet space is also optimised by removing the need for
additional cable tidy or jumper ring panels. This can
equate to a saving of up to 50% of valuable cabinet
space.
Standard rings hold up to 24 cables
Unique Patented system
Product Description
Blank panels are also available allowing the same
versatile rings to be used in more traditional jumper ring
panel format.
36
Cable
Cable
Cable
Cable
Cable
Tidy
Tidy
Tidy
Tidy
Tidy
Rings - Standard (Pack of 4)
Rings - Standard (Pack of 20)
Panel (with 4 Standard rings)
Rings - Large (Pack of 4)
Rings - Large (Pack of 20)
Part Number
009-001-020-04
009-001-020-20
009-001-021-04
009-001-022-04
009-001-022-20
Cable Management
Accessories
Features & Benefits
Make installations neater and more
professional
Prevent cable strain
Finished in black to match panels
Cable Management Tray:
Product Description
Cable Management Tray (Standard)
Cable Management Tray (High Density)
Cable tidy (4 ring)
Cable tidy (5 ring)
Brush Strip Panel
1U Dump Panel
2U Dump Panel
Part Number
009-001-008-00
009-001-008-10
009-001-007-00
009-001-007-03
009-001-030-00
009-001-009-11
009-001-009-12
Cable management on Connectix Cabling System patch
panels can be enhanced by the use of the cable
management tray. The tray fits securely at the rear of any
Connectix standard or high density patch panels, and
provides additional cable tie positions to allow neat
routing of cables from the back of the panel.
Jumper Ring Panels:
These provide rings to allow patch leads to be supported
and prevented from obscuring other equipment.
Connectix Cabling System jumper ring panels are
available in two configurations; either four rings for
horizontal support, or three for horizontal and two for
vertical support.
Dump Panels
37
Labelling
Machines
Features & Benefits
Ideal for producing designation labels
P-Touch 1250 and 65 are hand held
units, ideal to take on site
All units print vertically and horizontally
Quick and simple to use
Wide range of tapes available
Connectix offer a range of labelling products, giving
you a flexible approach to designating your cabling
systems. Labels created on these units are perfect
for Connectix Cabling System panels, modules and
cabinets.
The Brother P-touch labelling machines are available in
three different models.
The P-Touch 2500PC links to a PC, so labels can be
created at a desk, and saved for re-use. It prints on a
wide variety of tapes ranging from 6mm up to 24mm with
21 varieties of tape available, it is possible to devise
colour schemes that can simplify labelling of installations
especially in large buildings with many floors. Printing can
be both horizontal and vertical.
1250 has more advanced features than the P-Touch 65.
The P-touch 1250 can print on 6mm, 9mm and 12mm
wide tapes, including laminated tape. It has a 300
character memory, can print horizontal and vertically. It
types in Helsinki font and has 6 type sizes and 9 type
styles.
The P-Touch 65 prints on 9mm and 12mm wide tape. It
types in Helsinki font and has 5 type sizes and 9 type
styles it has 180 characters and symbols that can be
mixed and matched with the sizes and styles available.
Both units are supplied with mains adapters and come in
handy carry cases.
Product Description
The P-Touch 1250 and 65 are battery operated hand
held units, which makes them ideal to take out on site.
These two units are quite similar, however the P-Touch
38
P-touch 2500
P-touch 1250
P-touch 65
Part Number
00A-300-250-00
00A-300-125-00
00A-300-065-00
Connectix
Labelling System
Features & Benefits
Runs under all recent versions of
Windows
Import Graphics
All labels supplied on A4 sheets
Handles both basic and complex
sequences with ease
Compatible with standard office laser
printers
Packs come in sheets of 20 (variable
number of labels per sheet)
Specification
Label Type
PL8
PL9
CL19
CL18
PL30
Product
Connectix 16 Way Patch Panels
Connectix 24 Way Patch Panels,
4 way Outlets
Connectix Single Outlets
Connectix 2 Way Outlet
Connectix 50 Way Voice Panel
Adhesive
x
x
x
Product Description
PL8 16 Way Patch Panels (440 Labels)
PL9 24 Way Patch Panels &
4 way outlets (1040 Labels)
CL19 Single Outlets (4160 Labels)
CL18 Dual Way Outlets (5200 Labels)
PL30 50 Way Voice Panel (1200 Labels)
Label Creator software
Part Number
009-001-100-01
009-001-100-02
The Connectix labelling system offers the
opportunity to create bespoke designation labelling
schemes for Connectix Cabling products with ease
and at low cost.
The free of charge software runs on all recent versions of
Windows, and allows the creation of simple and more
complex numbering schemes. Labels are available for all
the products in the Connectix Cabling System range of
panels and outlets. The labels are supplied on A4 sheets,
manufactured by Sharpmark, and are of industry
standard, suitable for all office laser printers.
009-001-100-10
009-001-100-11
009-001-100-03
009-001-100-00
Engraved Labels
For the ultimate in bespoke designation, Connectix can
supply tailor made Traffolyte style labels in 15 different
colour combinations. These labels are suitable for
panels, outlets and cabinets.
39
Lantek 6 & 7
LAN Cable Testers
Features & Benefits
The Lantek 7 is the first fully
compliant tester for the
emerging Category 7 standards
The Lantek 6 can perform a full
Category 6 auto test in less
than 25 seconds
Lantek 6 is fully upgradeable
to the Lantek 7
Both units come in
a soft carry case
The Lantek 6 and 7 LAN testers have been
developed to make Cabling System testing quicker
and easier than ever.
The Lantek 7 is the first cable tester fully compliant with
the emerging Category 7/ISO F standards, certifying
installations up to 750MHz.
The Lantek 6 is a fully compliant Category 6 /ISO E cable
tester with a frequency range of up to 350MHz which also
surpasses Level III accuracy. The Lantek 6 can perform a
full Category 6 or ISO E auto test in less than 25 seconds.
Specification (cont.)
Autotest storage Capacity (External 32 MB Memory Flash)
No graphics
Up to 24 000 Tests
With Graphics
Up to 400 Tests with 32MB
Up to 3200 Tests with 256 MB
*depending on autotest categories
Autotest Time (350MHz)
Approx 25 Seconds
Standard Test compliance ANSI/TIA/EIA 568B, Category 6 (draft)
ISO C/D and ISO E/F* (draft), AS/NZS 3080,
IEEE802.3 Ethernet, EN50173, EN50173.A1
*LANTEK 7 only
Cable Types
UTP/ScTP/FTP, CAT 3/5E/6/7*; ISO C/D/E/F*
(Channel, Basic and Permanent Link)
IBM STP Type1, 2, 6, Coax
*LANTEK 7 only
Dimensions
10.1” x 5.0” x 2.3” display and Remote
256mm x 127mm x 58mm display and Remote
Weight
2.3lb(1050g) – Display, 2.0lb (914g) – Remote,
1.2lb (548g) – Battery
Battery Pack
NiMH (rechargeable)
Typical Operating Life (battery)
8 Hours
Max. Operating Time
0°C-50°C
Max Storage Temp
-20°C - +70°C
Humidity
5-90% non condensing
40
Product Description
Part Number
Lantek 7 LAN Cable Certifier
Lantek 6 LAN Cable Certifier
00A-001-700-01
00A-001-606-01
Specification
Lantek 7
Length (50-100 Ω cable)
Delay
Average Impedance
Capacitance (Bulk)
Capacitance
DC Loop Resistance
Attenuation
NEXT
Return Loss
ELFEXT
Noise Floor
Dynamic Range
Range
Resolution
Accuracy
0-2000 ft
1ft
±(3%+3ft)
0-8000 ns
1 ns
±(3%+1ns)
35-180Ω
0.1Ω
±(3%+1Ω)
0-100nF
1 pF or 3dig
±(2%+20pF)
0-100 pF/ft
0.1pF
±(2%+1pF)
0-200Ω
0.1Ω
±(1%+2Ω)
1-750 MHz
0.1dB
Level III*
1-750 MHz
0.1dB
Level III*
1-750 MHz
0.1dB
Level III*
1-750 MHz
0.1dB
Level III*
<-90dB
>90dB
*Level III only specified to 250MHz
Lantek 6
Length (50-100 Ω cable)
Delay
Average Impedance
Capacitance (Bulk)
Capacitance
DC Loop Resistance
Attenuation
NEXT
Return Loss
ELFEXT
Noise Floor
Dynamic Range
Range
Resolution
Accuracy
0-2000 ft
1ft
±(3%+3ft)
0-8000 ns
1 ns
±(3%+1ns)
35-180Ω
0.1Ω
±(3%+1Ω)
0-100nF
1 pF or 3dig
±(2%+20pF)
0-100 pF/ft
0.1pF
±(2%+1pF)
0-200Ω
0.1Ω
±(1%+2Ω)
1-350 MHz
0.1dB
Level III*
1-350 MHz
0.1dB
Level III*
1-350 MHz
0.1dB
Level III*
1-350 MHz
0.1dB
Level III*
<-90dB
>90dB
*Level III only specified to 250MHz
Autotest Storage Capacity (Internal memory)
No Graphics
With Graphics
Up to 6000 Tests
Up to 100 Tests
Installation
Tools
Features & Benefits
Contains all the tools required for
structured cabling termination
Housed in a convenient zip wallet
Includes the unique Connectix cable
stripper
Specification
Case
Underarm zip case made from
black nylon, zipped on 3 sides with
internal elasticated tool holders
Size approx 205 x 210 x 26mm
Flat blade screwdriver
Chrome vanadium steel shaft, cellulose
acetate handle, 5mm wide parallel tip
Cross head screwdriver
Chrome vanadium steel shaft,
cellulose acetate handle,
No.2 Posidrive Supadrive tip
Punchdown Tool
For standard IDC termination;
includes removal tool
Wire Cutters
125mm Diagonal side cutters
with red plastic coated handles.
Cutting Capacity - Soft Wire 3mm DIA
Med Wire - Med Wire 2.3mm DIA
Hard Wire - Hard Wire 1.5mm DIA
Cable Stripper
Bi-Directional rotary stripper
Max cable insulation thickness 0.5mm
Max No of cuts - 5000
Tester
Battery operated hand held cable
connection verifier. Test for cross pair and
shorts. Also indicates shield connection.
The Connectix Cabling Systems installation kit
contains all the tools needed for installing Data
Cabling in one convenient case.
It contains a pozi drive screwdriver for cage nuts and
cabinet shelves, a flat blade screwdriver for faceplate
screws - Wire Cutters, Punch Down Tool, Cable Stripper
and the Connectix tester, an easy to use diagnostic tool
to confirm connectivity of installed cabling.
Product Description
Part Number
Installation Toolkit
Flat Blade Screwdriver
Crosshead Screwdriver
IDC punchdown tool
Wire Cutters
00A-012-001-00
00A-012-002-01
00A-012-002-02
00A-007-003-01
00A-012-003-00
41
Tester &
Cable Stripper
Features & Benefits
Connectix Tester
Checks shielded and unshielded cabling
Identifies Crossover Patch Cords
Custom Logo service available
Connectix Cable Stripper
Controlled Cutting Depth
Encapsulated Blades for
Maximum Safety
Minimises Damage to wires
Strips UTP, FTP & outer jacket on RG58
and RG59 coax cables
When installing cabling or trying to find a fault, there
is often a need for a quick, easy to use tool to verify
connectivity. The Connectix Tester brings this tool
within everybody’s reach in a unique snap-together
design making it easy to take on site.
Equally suited to check a single patch cord or a complete
channel, the Connectix Tester will give an instant
indication of the connections present. Four bi-colour
LEDs indicate the status of the pairs in the cabling, with
a separate indicator showing the shield connection for
shielded systems. The circuitry has been specially
designed to identify crossover patch cords.
Specification
Connectix Tester
Material
Battery
Tests for
Indicates
Remote Indicator
Connectix Cable Stripper
Min. Cable Diameter
Max. Cable Diameter
Depth of Cut
Expected Life
Material
42
PP3
Cross Pair, Open Pair, Short
Shield Connection
System Linked
5mm
8mm
0.5mm
5000 Cuts
One way of stripping data cables is to use a knife,
but the right way to strip data cables is to use the
Connectix Cable Stripper. Pocket size, safe and easy
to use even in confined spaces.
The fully encapsulated blades ensure a precisely
controlled and constant cutting depth, without the risk of
nicking the individual wires or your fingers. It just takes
one rotation of the stripper to remove the outer jacket of
all common shielded and unshielded data cables up to a
diameter of 8mm.
As an added advantage, the Connectix Stripper can also
be used to strip the outer jacket of RG58 and RG59 size
Coaxial Cables without the damage to the outer shield
that seems inevitable when a knife is used.
Product Description
Connectix Tester
Connectix Cable Stripper (box of 10)
Part Number
00A-200-001-00
00A-012-004-00
Cable Assembly
Accessories
Features & Benefits
Boots Suitable for UTP and FTP plugs
Cat 5E patch cable available in
10 different colours
UTP and FTP plugs available
Product Description
Connectix RJ45 Boot Grey
Connectix RJ45 Boot White
Connectix RJ45 Boot Blue
Connectix RJ45 Boot Green
Connectix RJ45 Boot Red
Connectix RJ45 Boot Yellow
Connectix RJ45 Boot Orange
Connectix RJ45 Boot Purple
Connectix RJ45 Boot Black
RJ45 UTP Plug
RJ45 FTP Plug
RJ11 Plug
Crimp Tool
CCS Cable Stripper
Cat 5E UTP Patch Cable Grey
Cat 5E UTP Patch Cable White
Cat 5E UTP Patch Cable Blue
Cat 5E UTP Patch Cable Green
Cat 5E UTP Patch Cable Red
Cat 5E UTP Patch Cable Yellow
Cat 5E UTP Patch Cable Orange
Cat 5E UTP Patch Cable Purple
Cat 5E UTP Patch Cable Peach
Cat 5E UTP Patch Cable Black
Cat 5E FTP Patch Cable Grey
Cat 5E FTP Patch Cable Blue
Cat 5E FTP Patch Cable Green
Cat 5E FTP Patch Cable Red
Cat 5E FTP Patch Cable Yellow
Part Number
006-003-007-51
006-003-007-52
006-003-007-53
006-003-007-54
006-003-007-55
006-003-007-56
006-003-007-57
006-003-007-58
006-003-007-59
006-003-001-20
006-004-001-20
006-003-001-20
00A-003-001-11
00A-012-004-00
001-003-002-01
001-003-002-02
001-003-002-03
001-003-002-04
001-003-002-05
001-003-002-06
001-003-002-07
001-003-002-08
001-003-002-17
001-003-002-19
001-004-022-01
001-004-002-03
001-004-002-04
001-004-002-05
001-004-002-06
The Connectix range of RJ45 Boots are available in a
wide variety of colours and are suitable for both UTP
and FTP RJ45 plugs.
The integrated latch cover helps to prevent the latch from
snagging on other cables.
Connectix offer a wide variety of coloured patch cable in
enhanced category 5 UTP and FTP variations.
43
Mini Networking
Equipment
Features & Benefits
Complete range of patching equipment
and Ethernet electronics
Designed to fit the Connectix Office
System Cabinet
Fast Ethernet compliant - Gigabit ready
Extensive range of accessories available
Options available to suit individual
networking requirements
All products are quality tested in the UK
An extensive range of networking equipment is
available to fit in the Connectix Office System
cabinet, providing Data, Voice and ISDN
connections. Products in the range include UTP
patch panels, fibre panels, voice and ISDN panels
and Ethernet hubs and switches.
Accessories such as shelves, blank panels, cable tidy
panels and brush strip panels are also available. With
such a wide selection of products the user has the
flexibility to grow and develop the system as required.
Product Description
12 Port RJ45 Enhanced Cat 5 RJ45 Panel
10” Unloaded Modular Panel
4 Port RJ45 Enhanced Cat 5 Module
4 Port ST Module
2 Port SC Module
4 Port ISDN Module
4 Port ISDN + 4 Port Phone Panel
Blank Module
Networx VW 5 Port Switch
Part Number
009-001-016-00
009-001-040-00
009-001-040-05
009-001-040-08
009-001-040-09
009-001-040-06
009-001-017-00
009-001-040-10
010-100-100-05
Specification
The Connectix Office System is a complete networking
package, designed for smaller networks in both the office
and home.
Specification
10” Modular Panel
Width
Depth
Height
Material
Finish
Socket Labels
Cable Management
Capacity
10” (260mm)
140mm
1U (44mm)
Matt black polyester paint
Improved cabling facility with individual
cable tie positions to give controlled cable
bending and access for left or right cable entry
Any 3 modules or blanks (up to 12 way)
12 Way RJ45 Panel
Width
10” (260mm)
Depth
35mm
Height
1U (44mm)
Finish
High gloss
Socket Labels
IDC Label
Individual colour coded labels to EIA258A/568B
Cable Guide
Sockets
RJ45 vertical jacks
IDC Blocks
4 way Industry Standard IDC blocks
PCB
4 way modular identical 1.6mm double –
sided PTH boards
Conforms to
EIA/TIA-568-B Enhanced Category 5 Specification
4 way Enhanced Net 5 Module
IDC Labels
Colour coded to EIA 258A/568B
IDC Blocks
Conforms to
Fibre Modules
Connector Options
Overall Depth
Gland Hole Size
44
4 way ST or 2 way SC
460mm
21mm
Mini
Cabinets
Features & Benefits
Ideal for the small office/home environment
Available with attractive Black or Grey
finish
Removable outer casing for easy access
Lockable front door
Cable access glands positioned in top
and bottom of unit
Polycarbonate front door for added safety
Specification
Wall Mount Cabinet
Finish
Material
Width
Depth
Height
Door
Capacity
Mild Steel to BS1449
270mm
263mm
360mm
Smoked grey polycarbonate
8 units (8u)
Shelf
Finish
Material
Width
Depth
Height
Mild steel to BS1449
10” (260mm)
140mm
44mm
Blank Panel 1u
Finish
Material
Width
Depth
Height
10” (260mm)
10mm
44mm
Blank Panel 2u
Finish
Material
Width
Depth
Height
10” (260mm)
10mm
88mm
Brush Strip Panel
Finish
Material
Width
Depth
Height
10” (260mm)
12mm
44mm
Cable Tidy Panel
Finish
Material
Width
Depth
Height
10” (260mm)
1.6mm
44mm
The compact design of the Connectix Office System
cabinet makes it the ideal housing for small network
requirements, allowing integration of Voice, Data,
ISDN and Internet Connections in one neat unit. The
cabinet has been designed to fit perfectly into both
the office and home environment. It has an 8u
capacity for the Connectix Office System range of
10” networking hardware and patching equipment.
The cabinet is available in a black or grey finish. A fully
detachable outer casing allows free access during
installation. The lockable smoked acrylic door enables
easy patching from the front of the unit. Cable access
glands are situated in the top and bottom and there are
ventilation slots in both sides.
An extensive range of cabinet accessories are available,
this includes shelves, blank panels, brush strip panels
and cable tidy panels.
Product Description
Connectix Office System Cabinet (black)
Connectix Office System Cabinet (grey)
10” Shelf
10” Blank Panel 1u
10” Blank Panel 2u
10” Brush Strip Panel
10” Cable Tidy Panel (with 4 rings)
Part Number
009-000-004-34
009-000-004-44
009-000-004-36
00C-001-002-19
009-000-004-42
009-001-020-00
009-001-021-06
45
Connectix Home
Cabinet
Features & Benefits
Houses the core home networking
equipment
Discreet stylish design
Capacity for future upgrades
Integrated internal power supply
The Connectix home cabinet has been designed to
be the heart of a state of the art home networking
system; housing all the core equipment and wiring
terminations.
The system allows the distribution of Voice, Data, ISDN,
Internet Connection, TV, Video and CCTV around the
home. It has the capacity for up to 10 units from the
range of: 12 way RJ45 panels; telephone host panels;
blank panels (to allow for future technology); TV
distribution input and output units and whole house
audio unit along with a specially designed shelf to house
a 5 port Networx Palm switch.
There is an enclosed section to house a 4-way power
unit from which all the internal equipment can be
supplied. Other leads and incoming cables can be routed
neatly into an enclosed section on the other side of the
unit.
Access to the cabinet is made easy with the flap down
front door, which for added security has been fitted with
a key lock.
The cabinet is the ideal size to fit neatly into a cupboard
under the stairs, garage or utility room, and the compact
design and stylish finish means the unit will not look out
of place in a variety of locations.
46
Product Description
Connectix Home Cabinet 10u
Home Cabinet - 10u inc 4 way PDU
0.3m Grey RJ45 Patch Lead
0.3m White RJ45 Patch Lead
0.3m Blue RJ45 Patch Lead
0.3m Green RJ45 Patch Lead
0.3m Red RJ45 Patch Lead
0.3m Yellow RJ45 Patch Lead
Part Number
009-000-004-60
009-000-004-64
003-304-003-01
003-304-003-02
003-304-003-03
003-304-003-04
003-304-003-05
003-304-003-06
Specification
Finish
Material
Width
Depth
Height
Capacity
High Gloss White
18 gauge sheet steel
415mm
105mm
450mm
10 x 1u 10” panels; 1 x 5 port Ethernet switch;
1 x 4 way PDU
Connectix Home
Patch Panels
Features & Benefits
Designed to fit into the Connectix
Home cabinet
Allow phone or data to be routed
around the house
Makes alterations simple as
requirements change
Supports high speed networks
including Gigabit Ethernet
Product Description
12 Way Enhanced Cat 5 Patch Panel
3 x 4 way Voice Panel
Blank Panel
Part Number
009-001-016-00
009-003-001-01
009-001-021-08
Specification
Width
Depth
Height
Finish
Socket Labels
IDC Labels
Sockets
IDC Blocks
PCB
Conforms to
10” (260mm)
1U (44mm)
35mm
Black Powder coat to BS6496
9mm Numbered Card
Individual colour Coded labels to EIA258A/568B
(Enhanced Cat 5 panel only)
RJ45 Vertical Jacks
4 Way Industry standard IDC Blocks
4 Way 1.6mm double sided PTH boards
EIA/TIA-568-B Enhanced Category 5 Specification
(Enhanced Cat 5 panel only)
Patch panels should be used to terminate the
cabling from each of the RJ45 outlets around the
home, enabling different services to be routed to any
outlet.
The Connectix Enhanced Category 5 patch panels
provide exceptional performance for high speed LANs
including Gigabit Ethernet applications in an easy to use
format. This 12 way panel consists of industry standard
IDC connections and high quality RJ45 Jacks. The panel
utilises the specially designed individually labelled cable
saddle to facilitate easy installation and cable
management. The rear of the panel features hook and
loop cable retainers at either end for bundling cables.
Each RJ45 port is numbered with a removable
identification label protected by an acetate strip.
The Connectix voice panel comprises of 3 separate units
that have a single input at the rear, which is distributed to
4 outputs on the front. This allows up to 4 extensions to
share a single phone line within each of the units. The
units can be connected together giving the option of 8 or
12 extensions from a single line.
The blank panel is ideal to fill any spaces not filled by the
other panels.
47
Connectix Home
TV Unit
Features & Benefits
Separate Inputs for SAT, FM, DAB and
UHF TV Bands
Auxiliary UHF input for CCTV etc
Optional multi room infra-red remote
control
Automatic powering for masthead
amplifier
Fully screened
Supplied complete with power unit
The Connectix Home TV Unit combines Satellite
LNB, UHF TV, FM radio and DAB Radio sources onto
one single Downlink output for connection to a
‘master’ outlet plate. A CCTV security camera (with
modulator) or similar UHF source can also be
connected.
UHF signals from the lounge equipment are fed back to
the unit via an Uplink cable. In the unit this feed is
combined with the VHF signals and amplified to provide
eight additional outlets. In this way all off air and local
CCTV and settop box signals (except IF) are available for
connection to outlets in other rooms of the house.
A straight forward ‘Star Wired’ installation is all that is
needed to get the unit up and running.
The Connectix Home CT100 is a 75 Ohm coax cable,
ideal for Video/TV distribution around the home.
This cable is available in both PVC and low smoke zero
halogen versions.
Product Description
Part Number
TV Distribution unit
CT100 Cable PVC (100m)
CT100 Cable LSOH (100m)
009-003-002-01
001-007-011-10
001-007-011-11
Specification
Operating frequency range
Gain at Downlink Outlet
Gain at Outlets 1 to 8
DC Passing
FM
DAB
UHF
CCTV
SAT
FM
DAB
UHF
CCTV
SAT
FM
DAB
UHF
CCTV
SAT
FM
DAB
UHF
CCTV
SAT
88 - 108MHz
217 - 230MHz
460 - 860MHz
460 - 860MHz
950 - 2150MHz
3dB +/- 2dB
3.5dB +/- 2dB
6dB +/- 2dB
6dB +/- 2dB
0dB +/- 3dB
3dB +/- 2dB
3.5dB +/- 2dB
0.5dB +/- 2dB
N/A
N/A
Yes
Yes
Infra-red control capability
TV Link - All outputs are IR enabled
Connectors
Type-F (Female)
Power Requirement
12V DC at 100 mA
Operating Temperature Range
0 - +40°C
Recommended analogue signal level
60 - 75dB uV
48
Connectix Home
Outlet Plates
Features & Benefits
Range of configurations available
Easy cable connections and access
Low Insertion Loss
Screened to EN 50083-2>65dB to
1GHz and >55dB to 2.2GHz
Specification
Single TV Plate
Band
Frequency Range
DC - 862MHz
Insertion Loss
0.5dB
Connector
IEC (f)
Duplex TV Plate
Band
Frequency Range
TV (return)
DC - 65MHz
TV (forward)
470 - 862MHz
Radio
87.5 - 230MHz
Insertion Loss
1.2dB
0.6dB
1.0dB
Connector
IEC (m)
IEC (m)
IEC (f)
Triplex TV Plate
Band
Frequency Range
TV (return)
DC - 65MHz
TV (forward)
470 - 862MHz
Radio
87.5 - 230MHz
Satellite
950 - 2400MHz
Insertion Loss
1.2dB
0.6dB
1.0dB
1.6dB
Connector
IEC (m)
IEC (m)
IEC (f)
F
Lounge TV Plate
Band
Frequency Range
TV (return)
DC - 65MHz
TV (forward)
470 - 862MHz
Radio
87.5 - 230MHz
Satellite
950 - 2400MHz
Uplink
DC - 862MHz
Insertion Loss
1.2dB
0.6dB
1.0dB
1.6dB
0.5dB
Connector
IEC (m)
IEC (m)
IEC (f)
F
IEC (f)
The Connectix Home TV outlet plates are available in
Single, Duplex, Triplex variations along with a
Lounge plate which includes TV, Radio, Satellite,
Uplink and RJ45 outlets.
The Compact size of the screened housings makes
cable access and wiring easy, cutting installation time to
a minimum. Excellent performance is ensured by low
insertion loss, minimal ingress and negligible module
cross talk. The outlets are designed for TV, Satellite, FM
DAB Radio and telephone/data applications.
Single and Dual RJ45 Data Outlets are also available for
data and phone distribution throughout the house. Voice
converters may be used to convert RJ45 sockets to
accept BT style phone plugs.
Product Description
Back-Box Depth
Min 35mm
Specification
Data Outlet Plates
Socket
RJ45
Cable Connection
Industry Standard IDC
Conforms to
Back-Box Depth
Min 15mm
Single TV Plate
Duplex TV Plate (TV + FM/DAB)
Triplex TV plate(TV, FM/DAB,SAT)
Lounge Plate (TV, FM/DAB, SAT, Uplink & RJ45)
1 Way Modular RJ45 Faceplate
2 Way Modular RJ45 Faceplate
Voice Convertor (RJ45 to BT Style)
Part Number
008-005-001-01
008-005-002-01
008-005-003-01
008-005-010-01
008-001-005-21
008-001-005-22
007-006-003-15
49
Connectors
Features & Benefits
Full range available
Singlemode and Multimode variants
Excellent optical performance
High grade ferrules
Full specifications available
on request
The Optix range of fibre connectors includes ST, SC,
LC, FC, FDDI, MT-RJ and SMA connectors and
adaptors, with the option of both multimode and
singlemode Variations on most types of connectors.
The whole range is manufctured to high quality
standards and conforms to the relevant
specifications. Large stocks are held of each of the
fibre connectors offered. Detailed specifications are
available on request.
The Optix ST connector offers a high performance, quick
fit, epoxy-polish termination at a very competative price.
The connector has an all metal body construction which
provides superior mechanical performance and simple
termination on to all common cable constructions.
The Optix SC connector utilises a unique one-piece
construction which has been designed to provide fast
and simple termination without the risk of epoxy leakage
onto the internal connector parts. This makes them ideal
for both high volume factory termination and on-site use.
Termination Service
Connectix provides a fast turnaround, high capacity termination service
manufacturing patchcords, pigtails and pre-terminated assemblies
fitted with all common connector types. We also carry extensive stock
of standard length patchcords and pigtails which are always available
for next day delivery.
50
Specification
Insertion Loss
Operating Temperature
Durability
Cable Retention
Singlemode & Multimode
0.3dB typical, 0.5dB max
-40°C to +80°C
<0.1dB change over 500 cycles
>150N (cable dependant)
This may vary between different types of connectors.
Product Description
ST Connector Multimode
ST Adaptor Phosphor Bronze Sleeve
ST Adaptor Zircona Ceramic Sleeve
ST AMP XTC Polymer Ferrule
ST-SC Interseries Adaptor
SC Multimode Connector
SC Simplex Adaptor PB Sleeve
SC Duplex Adapter PB Sleeve
FC Multimode Connector
FC D-Hole Adapter PB Sleeve
FDDI Connector AMP
ST Singlemode Connector
SC Singlemode Connector
SC Singlemode Connector APC
FC Singlemode Connector
LC Connector Simplex 2.0mm
LC Connector Duplex 2.0mm
Part Number
004-001-001-11D
004-001-002-02D
004-001-002-03D
004-001-001-09D
004-001-015-00D
004-001-008-02D
004-001-009-02D
004-001-010-03D
004-001-014-00D
004-001-014-10D
004-001-005-03D
004-003-001-00D
004-003-008-00D
004-003-008-01D
004-003-014-00D
004-001-001-15D
004-001-001-16D
Tools and Consumables
Termination tools and consumables are available for immediate delivery
from stock. Refer to page 60.
Terminated
Assemblies
Features & Benefits
ST, SC, LC, FC, SC Duplex and FDDI
variants
Patchcords, Pigtails and pre-terminated
systems
High quality
100% tested and certified
High capacity termination facility
Stock availability
Very competitive pricing
Product Description
Part Number
Multimode
ST Pigtail 62.5/125 (1 metre)
SC Pigtail 62.5/125 (1 metre)
LC Pigtail 62.5/125 (1 metre)
ST - ST Duplex Patch Lead 62.5/125 (1 metre)
ST - SC Duplex Patch Lead 62.5/125 (1 metre)
ST - FDDI Patch Lead 62.5/125 (1 metre)
SC - SC Duplex Patch Lead 62.5/125 (1 metre)
FDDI - FDDI Patch Lead 62.5/125 (1 metre)
ST - ST Simplex Patch Lead 62.5/125 (1 metre)
ST - SC Simplex Patch Lead 62.5/125 (1 metre)
SC - SC Simplex Patch Lead 62.5/125 (1 metre)
005-101-010-01
005-107-010-01
005-102-010-01
005-302-010-01
005-308-010-01
005-304-010-01
005-307-010-01
005-305-010-01
005-202-010-01
005-208-010-01
005-207-010-01
Multimode OM3
ST Pigtail OM3 50/125 (1 metre)
SC Pigtail OM3 50/125 (1 metre)
ST-ST OM3 Duplex Patch Lead 50/125 (1 metre)
ST-SC OM3 Duplex Patch Lead 50/125 (1 metre)
SC-SC OM3 Duplex Patch Lead 50/125 (1 metre)
LC-LC OM3 Duplex Patch Lead 50/125 (1 metre)
LC-SC OM3 Duplex Patch Lead 50/125 (1 metre)
LC-ST OM3 Duplex Patch Lead 50/125 (1 metre)
005-421-010-01
005-420-010-01
005-646-010-01
005-642-010-01
005-633-010-01
005-634-010-01
005-629-010-01
005-635-010-01
Singlemode
ST Pigtail 9/125 (1 metre) Simplex
SC Pigtail 9/125 (1 metre) Simplex
FC Pigtail 9/125 (1 metre) Simplex
ST - ST Duplex 9/125 (1 metre) Duplex
ST - SC Duplex 9/125 (1 metre) Duplex
SC - SC Duplex 9/125 (1 metre) Duplex
FC - FC Duplex 9/125 (1 metre) Duplex
FC - ST Duplex 9/125 (1 metre) Duplex
FC - SC Duplex 9/125 (1 metre) Duplex
005-701-010-01
005-707-010-01
005-714-010-01
005-902-010-01
005-908-010-01
005-907-010-01
005-914-010-01
005-910-010-01
005-911-010-01
The Optix range of Patchcords, Pigtails and PreTerminated assemblies are manufactured in house
and surpass the high standards required for
datacomms and CATV applications.
Our termination facility is one of the largest in the UK,
providing a high volume, fast turnaround service for all
types of multimode and singlemode terminations. We
supply singlemode terminations with all polish finishes
including SPC, UPC and APC variants.
Our range includes ST, SMA, SC, LC, FC, SC Duplex,
FDDI and ESCON assemblies. All terminations are
manufactured to the highest industry specifications and
are 100% tested, certified and fully traceable through our
quality system.
We are committed to holding extensive stock of many
assembly types, in all common lengths. This allows us to
provide a same day despatch service on most
small/medium volume orders.
51
Fibre Patch
Panels
Features & Benefits
Available in 1U, 2U and 3U formats
ST, SC, FC, SC Duplex, FDDI and ESCON
versions supplied loaded or unloaded
High quality rigid mild steel construction
Rear knock-outs to suit three sizes of
cable glands
Adjustable mounting brackets providing
flush-mount or 50mm recess
Numbered front panel
Fibre management kits included
The range of Optix 19” rack mount patch panels are
available in 1U, 2U and 3U sizes with a wide range of
adaptor types and populations. The panels are
manufactured from mild steel and are finished in a
grey powder coating (other colours on request).
The patch panels feature adjustable mounting brackets,
numbered adaptor ports, and a range of rear panel
knock-outs to suit all common cable gland sizes.
Panels are supplied fully loaded and complete with splice
management. Unloaded panels are also available.
Specification
Width
Depth
Height
Material
Colour
425mm
200mm
1U, 2U or 3U
Mild Steel
Grey (BS4800 00A05)
Custom Design Services
Connectix offer a custom design service for any cable management
product outside our standard range. We can produce any enclosure to
your individual requirements or specification on a very short lead time.
52
Patch Panel Options
1U
2U
1U
2U
1U
2U
1U
2U
3U
ST (or FC)
ST (or FC)
SC
SC
SC Duplex
SC Duplex
FDDI / ESCON
FDDI / ESCON
FDDI / ESCON
4, 8, 12,
24,
4, 8, 12,
24,
2, 4, 6, 8,
16,
16
36
16
36
12
24
and
and
and
and
and
and
24
48
24
48
16
32
8
16 and 24
36
way
way
way
way
way
way
way
way
way
Product Description
4 Way Loaded ST Panel
4 Way Loaded SC Panel
4 Way Loaded ST/PC S/Mode Panel
16 Way ST/PC S/Mode Panel
24 Way ST/PC S/Mode Panel
4 Way SC/PC S/Mode Panel
4 Way FC/PC S/Mode Panel
Part Number
009-006-003-00
009-006-003-01
009-006-003-02
009-006-003-03
009-006-003-04
009-006-005-00
009-006-005-01
009-006-005-02
009-006-005-03
009-006-005-04
009-006-004-00
009-006-004-01
009-006-004-02
009-006-004-03
009-006-004-04
009-006-009-00
009-006-009-01
009-006-009-02
009-006-009-03
009-006-009-04
009-006-021-00
009-006-021-01
009-006-021-02
009-006-021-03
009-006-021-04
Break Out
Boxes
Features & Benefits
Tough ABS construction
Patch, Splice or Hybrid versions
Wall mountable
Available with fibre / splice management
kits
Custom machining service
Low cost
Stock availability
Specification
Dimensions
Material
Colour
190mm x 150mm x 85mm
Mild Steel or ABS
Light grey
Product Description
Part Number
ST 4 Way break out box
FC 4 Way break out box
SMA 4 Way break out box
009-008-001-04
009-008-001-08
009-008-001-12
009-008-004-04
009-008-004-08
009-008-004-12
009-008-002-04
009-008-002-08
009-008-002-12
SC
SC
SC
SC
009-008-007-04
009-008-007-08
009-008-007-12
009-008-007-16
1
1
2
2
4 Way Loaded Steel break out box
gland in/1 out break out box
gland in/2 out break out box
glands in/2 out break out box
glands Same end break out box
009-007-002-11
009-007-002-12
009-007-002-14
009-007-002-02
The Optix range of wall mountable break out boxes
are designed to provide a very cost effective method
of patching or splicing in situations where equipment
racks or cabinets are not available.
The break out boxes are available in tough and
lightweight ABS or Mild Steel for more demanding
situations.
These boxes can be supplied fully loaded with all
common adaptors including ST, SMA, SC, FC, SC
Duplex, FDDI and ESCON types. They are supplied in a
number of popular formats including 1in/1out, 1in/2out
and 2in/2out. We provide a custom machining service
enabling us to supply any other splice box configuration
or hybrid enclosures on very short lead times.
All enclosures are offered with full fibre / splice
management kit options and are available from stock.
53
Lockable Wall
Mounted Enclosure
Features & Benefits
High quality welded steel construction
Two doors with different locks
Internal panels available for ST, SC, FC,
SC Duplex, FDDI and ESCON
Supplied unloaded or loaded with adaptors
Four cable entry knock-outs on top and
bottom
Patchcord exit from top or bottom
Custom colour and silk screen service
Fibre management kits available
The Optix Locking Wall Box provides an ideal
solution for secure patching in any location where a
cabinet or other suitable enclosure is not available.
Manufactured from 1.5mm mild steel, the enclosure
features two doors with different locks and an
interchangeable internal panel which is available for a
wide range of adaptor types. Cable entry and patchcord
exit is from the top or the bottom of the unit. Four knockouts are provided (top and bottom) to suit common cable
gland sizes.
The enclosure can be supplied loaded or unloaded and
with optional fibre/splice management kits.
54
Product Description
Lockable Wall Mounted ST 16 Way enclosure
Lockable Wall Mounted SC 16 Way enclosure
ST (1-36 Way) Lockable enclosure unloaded
SC (1-36 Way) Lockable enclosure unloaded
Part Number
009-009-001-16
009-009-001-24
009-009-001-36
009-009-002-16
009-009-002-24
009-009-002-36
009-009-001-00
009-009-002-00
Opal ™
Pre-terminated cabling
Features & Benefits
Quick installation time
Low installed cost
Full test documentation supplied
No special fibre optic skills or equipment
required
Factory terminated and tested
ST, SC and FC-PC connector options
(multimode and singlemode)
4, 8 and 12 fibre configurations
Standard cables and management
enclosures
Optix have developed a cost effective preterminated cabling system called Opal™ (Optical
Pre-Assembled Link) which is completely based
around standard networking products. The system
allows a fibre optic network to be installed in a
fraction of the time taken by conventional on-site
direct termination or fusion splicing. It requires no
special installation skills or equipment, and can
therefore be installed by non-specialist personnel,
vastly reducing the installation cost.
The system consists of standard internal / external tight
buffered distribution cable, which is supplied in specific
lengths for each cable run in an installation. This cable is
available in multimode or singlemode with fibre counts of
4, 8, 12, 16 or 24.
The cable is factory prepared with a gland on each end
which is epoxy bonded onto the kevlar strain relief yarn in
the cable. The secondary coated fibres are terminated
with either ST, SC, LC or FC-PC connectors which are
fully tested and certified under our quality system. This
ensures that the quality of the complete cable assembly
is guaranteed before shipping to site.
has a small diameter and is flexible, lightweight and
extremely rugged. The protection sleeve connects onto
the epoxy bonded cable gland and can withstand the
high tensile loads applied when pulling cables through
ducts. A pulling eye is incorporated to allow the
attachment of a draw cable.
After cable installation, the protection sleeves are
removed and the connectors are threaded through the
gland hole of any cable management enclosure. A gland
nut is used to secure the cable gland in place. The
connectors are simply connected to the adaptors inside
the enclosure to complete the installation.
Opal ™ Options
A specially developed termination protection sleeve is
fitted to each end of the cable assembly to protect the
connectors during shipping and installation. This sleeve
Length
Number of Cores
Connector Types
Fibre Types
Customer Specified
4 to 24
ST, SC, LC & FC
62.5/125, 50/125, 9/125
55
Internal/External Uni-loose
Tube Distribution Cable
Features & Benefits
Fire retardant LSZH jacket
Up to 24 fibres
Choice of fibre type and specification
Small diameter
Water and UV resistant
Internal or external use
Small bending radius
Low cost
Steel tape armoured version available
The Optix multi-purpose uni-loose tube distribution
cable provides a highly cost effective solution to all
internal or external datacomms cabling requirements,
particularly where on site fusion splicing of pigtails is
the preferred termination technique.
The cable consists of a single central uni-tube containing
individually colour coded 250µm buffered fibres. This
tube is embedded in an Aramid yarn strength member,
and oversheathed with a single Low Smoke Zero
Halogen (LSZH) outer jacket. The outer jacket is flame
retardant, UV stabilised and extremely resistant to the
ingress of moisture.
A choice of multimode and singlemode fibre types and
specifications are offered (see fibre specification sheet) with
fibre counts from four to twenty-four in the standard range.
Their very small diameter, light weight and excellent
environmental performance makes these cables ideal for
installation in a broad range of network applications
including LAN backbones, networks with mixed indoor
and outdoor cabling, outdoor in flooded ducts and any
premises distribution system.
Free Cut to Length Service
Connectix hold extensive stock of a complete range of multi purpose
uni-loose tube distribution cables. We offer a fast turnaround cut to
length service providing custom lengths to your exact requirements.
This service is free of charge, and all orders from stock can be available
56
Specification
Jacket Material
Low Smoke Zero Halogen
Number of fibres
Nominal cable diameter (mm)
4
8
12
16
24
6.0
6.0
6.0
6.0
7.0
Nominal cable weight (kg/km)
35
35
35
35
45
Min bend radius (mm)
100
100
100
100
100
Max tensile strength (N)
permanent/installation
500/1000 500/1000 500/1000 500/1000 500/1000
Operating temp range (°C)
Fibre Specification
-10 to +40
See fibre specification data sheet
Product Description
4 Core Internal/External Loose tube 62.5/125
4 Core OM3 Internal/External Loose tube 50/125
4 Core Internal/External Loose tube 50/125
4 Core Internal/External Loose tube Singlemode
Part Number
002-005-005-31
002-005-005-51
002-005-005-61
002-005-005-71
002-005-005-81
002-005-004-04
002-005-004-08
002-005-004-12
002-005-004-16
002-005-004-24
002-005-006-04
002-005-006-08
002-005-006-12
002-005-006-16
002-005-006-24
002-005-010-04
002-005-010-08
002-005-010-12
002-005-010-16
002-005-010-24
Internal/External Tight
Buffered Distribution Cable
Features & Benefits
Fire retardant LSZH jacket
Up to 24 fibres
Small diameter
Water and UV resistant
Internal or external use
Easy to handle
Small bending radius
Low cost
Specification
Jacket Material
Low Smoke Zero Halogen
Number of fibres
4
8
12
16
24
5.0
6.0
7.0
7.0
8.0
55
95
26
40
55
long/short term
100/50
100/50
130/75
Max tensile strength (N)
permanent/installation
225/450 280/560 335/670 335/670 335/670
Fibre Specification
130/75 230/115
-10 to +55
Product Description
4 Core Internal/External Tight Buffered 62.5/125
4 Core OM3 Internal/External Tight Buffered 50/125
4 Core Internal/External Tight Buffered 50/125
4 Core Internal/External Tight Buffered Singlemode
The Optix multi-purpose tight buffered distribution
cable provides a highly cost effective solution to all
internal / external datacomms cabling requirements,
particularly where on site direct connectorisation is
the preferred termination technique.
Part Number
002-005-005-33
002-005-005-53
002-005-005-63
002-005-005-73
002-005-005-81
002-005-004-28
002-005-004-32
002-005-004-34
002-005-004-36
002-005-004-38
002-005-006-26
002-005-006-27
002-005-006-28
002-005-006-30
002-005-006-32
002-005-011-04
002-005-011-08
002-005-011-12
002-005-011-16
002-005-011-24
The cable consists of individually colour coded 900µm
secondary coated fibres, embedded in an Aramid yarn
strength member, and oversheathed with a single Low
Smoke Zero Halogen (LSZH) outer jacket. The outer
jacket is flame retardant, UV stabilised and extremely
resistant to the ingress of moisture.
specifications are offered (see fibre specification sheet) with
fibre counts from four to twenty-four in the standard range.
Their small diameter, light weight and excellent
environmental performance makes these cables ideal for
installation in a broad range of network applications
including LAN backbones, networks with mixed indoor
and outdoor cabling, outdoor in flooded ducts and any
premises distribution system.
57
Uni Tube Corrugated
Steel Armoured Cable
Features & Benefits
Two or up to twenty four fibre
configurations
Rodent proof
Water resistant
High tensile strength and crush resistance
Corrugated steel armouring tape
Suitable for harsh external environments
Low cost
50/125, 62.5/125 & Singlemode fibre
types
The Optix Uni tube steel tape armoured cable is
suitable for installation in the most demanding, harsh
environments. The cable has excellent tensile
strength and crush resistance characteristics and is
also rodent proof.
The cable consists of a central jelly filled green polyester
tube, with up to twenty-four optical fibres inside.
The tube is protected with kevlar strength members and
thick inner corrugated steel tape armour is then applied.
A black LSZH outer sheath protects the cable
construction and is extremely resistant to the ingress of
moisture.
Specification
Jacket Material
Number of fibres
Black LSZH
2-16
18-24
8.5
9.5
75
85
55
55
Tensile strength (permanent N)
500
500
Tensile strength (dynamic N)
1000
1000
Compressive Strength (crush N)
2000
2000
Storage &
Installation: -40
Operation:
-40 to 70
Fibre Specification
Product Description
specifications are offered ranging from two, up to twentyfour fibre configurations.
This tough rugged cable is ideal for all external
environments including LAN direct burial, tunnels and
heavy-duty ducts.
58
4 Core Uni Tube CST 62.5/125
Part Number
002-005-008-04
002-005-008-08
002-005-008-12
002-005-008-16
SWA UNI Tube
Fibre Cable
Features & Benefits
Choice of 4 up to 24 fibre configuration
Suitable for indoor and outdoor usage
Waterproof
Rodent proof
Cables have a LSZH flame retardant sheath
Suitable for direct burial
Available in 50/125, 62.5/125 and
Singlemode fibre types
Specification
Jacket Material
Nominal Outer Diameter
1.5mm FireBur® LSZH Sheath
4-16 Cables: 11mm
18-24 Cables: 12mm
Nominal Weight
4-16 Cables: 190kg/km
18-24 Cables: 210kg/km
Properties in case of fire
Fulfils IEC 60332-1
Tensile Strength (dynamic)
1200N
Tensile Strength (permanent)
700N
Compressive Strength (crush)
2000N
Torsion
5 Cycles +/- 1 turn
Kink
The cables do not form a kink when a loop
is drawn together to a diameter 12 times
the cable nominal diameter.
Min. Bending radius
240mm
Temperature Range
Installation: -10ºC to +60ºC
Operation & Storage: -30ºC to +60ºC
Max. Attenuation variation in the
operational temperature range:
Multimode: 0.5dB/km
Singlemode: 0.2dB/km
This cable has excellent tensile strength and a layer of
0.9mm steel wire provides safe rodent protection.
The cable core consists of a central jelly filled green
polyester tube, with up to 24 optical fibres contained
within. The tube is protected with aramid strength
member and a 1.1mm thick FireBur® LSZH sheath plus
a layer 0.9mm galvanised wire armouring. All of which is
surrounded by a 1.5mm thick black Firebur® LSZH
sheath which protects the cable and construction and is
extremely resistant to the ingress of moisture.
A choice of multimode and Singlemode fibre types and
specifications are offered ranging from 4, up to 24 fibre
configurations.
Product Description
Optix SWA Uni-tube cable is suitable for direct burial
installations making it the perfect solution for the
most demanding and harsh environments.
Part Number
4 Core SWA LSZH 9/125
002-005-025-04
002-005-025-08
002-005-025-12
002-005-025-24
002-005-026-04
002-005-026-08
002-005-026-12
002-005-026-24
4 Core SWA LSZH 62.5/125
002-005-027-04
002-005-027-08
002-005-027-12
002-005-027-24
This tough rugged cable is ideal for all external
environments including direct burial, tunnels and heavyduty ducts.
59
Termination Kit
& Fyberscope™
Features & Benefits
Includes Optix Fyberscope™
Supplied in rugged, durable flightcase
Everything you need in one box
Consumables can be supplied
individually
A third of the cost of industry standard
microscopes
Perfect vision of ferrules
Handheld and lightweight
Includes backlight facility
Supplied ready to use
Robust metal construction
Whether termination procedures are taking place onsite or in production facilities, the Optix Termination
Kit provides all the necessary equipment and
consumables for manufacturing cabling assemblies
and terminating cables.
The kit consists of an Optix Fyberscope™, Fibretron
Curing Oven, Crimp Tools, Termination Epoxies,
Polishing Tools and Health & Safety Equipment.
The kit is supplied in a rugged flight case, resistant to
demanding on-site working conditions. Optix Termination
kits are available from stock with replacement
consumables available individually.
Product Description
Fibre Termination kit
Hand held Microscope
60
Part Number
00A-011-001-00
00A-010-001-00
The Optix Fyberscope™ is the ideal instrument for
carrying out the necessary visual checks on a fibre optic
ferrule.
Designed to be a handheld and lightweight optical
microscope, the Fyberscope™ is available in four styles
- 100, 200, 320 and 400 times magnification. The
Fyberscope™ is manufactured with a robust metal
construction. This optical microscope provides a clear
central focus - eliminating the need for alignment. The
Fyberscope™ also includes a backlight facility, enabling
the user to illuminate the fibre core and check for
scratches, cracks and other impurities. A choice of
universal or dedicated adaptors can be supplied and the
Fyberscope™ is available as part of the Optix
Termination Kit.
Light Source and
Power Meter Kits
Features & Benefits
Accurate economical fibre link testers
Extended battery life
Temperature compensated
Kits come complete in Hard Carrying
Case
Fully calibrated and supplied with NIST
calibration report
Product Description
Part Number
Light Source and Power Meter Kits
Silicon ZOOM meter with 850nm
00A-009-004-01
ST multi-mode source
Silicon ZOOM meter with 850nm
00A-009-004-02
SC multi-mode source
ZOOM meter with 850nm ST multi-mode source 00A-009-004-03
ZOOM meter with 850nm SC multi-mode source 00A-009-004-04
ZOOM meter with 850 & 1300nm
00A-009-004-05
ST multi-mode source
00A-009-004-06
SC multi-mode source
00A-009-004-07
ST single mode laser source
ZOOM meter with 850 & 1300nm ST multi-mode 00A-009-004-08
source & 1310 & 1550nm ST single mode laser source
Specification
Zoom Power Meters
Measurement Range
Absolute Accuracy
Wavelength Range
Resolution
Precision
Battery Life
Laser Owl Singlemode Light Sources
Launch Method
Innitial Accuracy
Centre Wavelength Accuracy
Spectral Width
Battery Life
+3 to -52 dBm
+/- 0.24 dB
750 to 1700 nm
0.1 dB
+/- 0.20 dB)
15 Hrs
FP Laser
+/- 0.10 dB @ 25°C
+/- 30nm
2nm
0 to 55°C
25 hrs
The Optical Wavelength Technologies light sources
and power meters provide a simple economic
method of measuring optical power in a variety of
fibre cables.
There are two power meters in the range, the Silicon
ZOOM which is suitable for 850nm multi-mode cables
and the Zoom universal, suitable for 850/1300/1550nm
multimode and singlemode cables. Both have a 3 digit,
0.1dB resolution display and a measurement range of +3
to -52 dBm (55dB), with an accuracy of 0.24 dB.
Reference values are stored for calibrated wavelengths
and a simple selector switch toggles between dBm
(optical power) and dB (optical loss) readings.
A wide range of light sources are available for use with
ZOOM power meters. The Laser Owl Range are for use
with singlemode cables, and are available with either
1310nm, 1550nm or both 1310 and 1550nm outputs.
The LED Owl range are for use with multimode cables
and are available with 850nm, 1300nm or both 850 and
1300nm outputs. All are simple to use with a power
switch, that is also used to select the different
wavelengths on the dual wavelength models, and an
indicator LED to show power is on, and whether there is
enough battery power to maintain calibrated output
power.
Laser Owl Singlemode Light Sources
Launch Method
LED
Innitial Accuracy
+/- 0.10 dB @ 25°C
Centre Wavelength
850 +/- 20nm; 1300 +50 -10nm
Spectral Width
1300: 170nm; 850: 35nm
0 to 55°C
Battery Life
40 hrs
61
Server
Cabinets
Features & Benefits
Fully removable sides
The design of this range allows for
maximum ventilation
Lockable doors all around provide
excellent security
High quality paint finish
Supplied fully assembled
Connectix Server Cabinets have been designed to
offer the optimum housing for Servers and
Networking Hardware. Vent panels in the front
doors, perforated rear doors, and vented roof all add
up to offer maximum ventilation; while lockable
doors all round provide essential security.
All doors are fully removable with quick release hinges for
easy equipment installation, and the large floor aperture
gives maximum cable access. The 800 wide variation
has additional cable access holes next to the rack
profiles, to allow easy routing of cables from the front to
the rear of the cabinet.
Connectix server cabinets are available in various
configurations and are supplied fully assembled. The
high quality attractive black finish ensure the cabinet will
complement high specification office environments.
62
Product Description
Part Number
Server
Server
Server
Server
Server
Server
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
12u
18u
27u
42u
45u
47u
600w
600w
600w
600w
600w
600w
x
x
x
x
x
x
1040d
1040d
1040d
1040d
1040d
1040d
009-000-130-12
009-000-130-18
009-000-130-27
009-000-130-42
009-000-130-45
009-000-130-47
Server
Server
Server
Server
Cabinet
Cabinet
Cabinet
Cabinet
27u
42u
45u
47u
800w
800w
800w
800w
x
x
x
x
1040d
1040d
1040d
1040d
009-000-135-27
009-000-135-42
009-000-135-45
009-000-135-47
Floor Standing
Cabinets
Features & Benefits
Ventilated top
Adjustable mounting posts
Lockable and removable side and rear
doors Cable access in base
Lockable perspex front door
High Density
Patching Frame
Product Description
Part Number
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Standing
Standing
Standing
Standing
Standing
Standing
Standing
18u
24u
27u
32u
39u
42u
45u
600w
600w
600w
600w
600w
600w
600w
x
x
x
x
x
x
x
600d
600d
600d
600d
600d
600d
600d
009-000-001-18
009-000-001-24
009-000-001-27
009-000-001-33
009-000-001-39
009-000-001-42
009-000-001-45
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Standing
Standing
Standing
Standing
Standing
Standing
Standing
18u
24u
27u
32u
39u
42u
45u
600w
600w
600w
600w
600w
600w
600w
x
x
x
x
x
x
x
780d
780d
780d
780d
780d
780d
780d
009-000-009-28
009-000-009-34
009-000-009-37
009-000-009-32
009-000-009-49
009-000-009-52
009-000-009-64
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Standing
Standing
Standing
Standing
Standing
Standing
Standing
18u
24u
27u
32u
39u
42u
45u
780w
780w
780w
780w
780w
780w
780w
x
x
x
x
x
x
x
600d
600d
600d
600d
600d
600d
600d
009-000-002-19
009-000-002-25
009-000-002-28
009-000-002-32
009-000-002-40
009-000-002-43
009-000-002-46
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Standing
Standing
Standing
Standing
Standing
Standing
Standing
18u
24u
27u
32u
39u
42u
45u
780w
780w
780w
780w
780w
780w
780w
x
x
x
x
x
x
x
780d
780d
780d
780d
780d
780d
780d
009-000-003-19
009-000-003-25
009-000-003-28
009-000-003-32
009-000-003-40
009-000-003-43
009-000-003-46
Mini Cabinet 9u 600w x 600d
009-000-012-09
009-000-012-12
009-000-012-15
42u High Density Patching Frame
009-000-052-43
The Rax range of 19” floor standing cabinets are an
ideal solution for housing network hardware and
patching equipment. The robust design makes them
suitable for use in IT departments and offices.
The cabinets are available in various configurations and
are supplied fully assembled. Each cabinet utilises a
ventilated top and four 19” adjustable front and rear
mounting posts. The cabinets feature hinged lift-off side
and rear lockable doors for maximum access to the
internal equipment with cable access in the base for
convenient routing of network cables. The cabinet
frameworks are finished goose grey with lockable ash
grey side and rear doors and toughened bronze tint
perspex lockable front door.
Rax 19” floor standing cabinets incorporate the essential
features for data communication environments - security,
durable construction, easy access and protection from
dust or contamination for the network equipment.
Accessories
A full range of cabinet accessories are available including Wall Mounting
Frames, PDU’s, Fixed Shelves, Telescopic Shelves, Castors, Cage
Nuts, Baying Kits, Roof Mounting Fan Units and Plinths. See page 66.
63
Wall Mounting
Cabinets
Features & Benefits
Ideal for smaller office environments
Adjustable mounting posts
Lockable perspex door
Cable access gland in top and base
The compact design of the Rax 19” wall mounting
cabinets makes them ideal for smaller networks and
workgroups. The wall units can be situated above
work areas to allow more room for standing
equipment.
The cabinets are available in various configurations and
are supplied fully assembled. Each cabinet comprises a
welded steel frame and two 19” adjustable front and rear
mounting posts. A gland plate is situated in the top and
bottom and the cabinets feature ventilation slots in both
side panels.
Each cabinet has a lockable inset perspex front door,
with steel doors optional. The cabinet frameworks are
finished goose grey.
Two Part Wall Mounting cabinets incorporate many of the
standard wall mounting cabinet features and when
divided they allow maximum access to the internal
equipment for convenient cable management.
64
Product Description
Part Number
Wall
Wall
Wall
Wall
Wall
Wall
Mounting
Mounting
Mounting
Mounting
Mounting
Mounting
6u 300 deep
9u 300 deep
12u 300 deep
15u 300 deep
18u 300 deep
21u 300 deep
009-000-008-06
009-000-008-09
009-000-008-12
009-000-008-15
009-000-008-18
009-000-008-21
Wall
Wall
Wall
Wall
Wall
Wall
Mounting
Mounting
Mounting
Mounting
Mounting
Mounting
6u 400 deep
9u 400 deep
12u 400 deep
15u 400 deep
18u 400 deep
21u 400 deep
009-000-004-06
009-000-004-09
009-000-004-12
009-000-004-15
009-000-004-18
009-000-004-21
Two
Two
Two
Two
Two
part
part
part
part
part
Mounting
Mounting
Mounting
Mounting
Mounting
009-000-007-09
009-000-007-12
009-000-007-15
009-000-007-18
009-000-007-21
Wall
Wall
Wall
Wall
Wall
9u 500 deep
12u 500 deep
15u 500 deep
18u 500 deep
21u 500 deep
Lightweight Wall
Mounting Cabinet
Features & Benefits
Ideal for installation sites
where space is limited such
as risers and shafts
Standard finish goose grey
(other colours on request)
Easy access to internal
equipment
The lightweight wallmounting cabinet has fixed
profiles and a large cutout panel at the rear.
Product Description
Part Number
6u 400mm Lightweight Wall mounted cabinet
009-000-100-06
009-000-100-09
009-000-100-12
009-000-100-15
009-000-100-18
009-000-100-21
009-000-001-09
009-000-001-12
009-000-001-15
009-000-001-18
009-000-001-21
2u
3u
4u
6u
3u
6u
009-000-032-02
009-000-032-03
009-000-032-04
009-000-032-06
009-000-034-03
009-000-034-06
19”
19”
19”
19”
19”
19”
Wall
Wall
Wall
Wall
Wall
Wall
Mounting
Mounting
Mounting
Mounting
Mounting
Mounting
Frame
Frame
Frame
Frame
Frame
Frame
200mm
200mm
200mm
200mm
350mm
350mm
deep
deep
deep
deep
deep
deep
The cabinet is finished in goose grey with a lockble ash
grey perspex inset door.
Rax 19” Wall Mounted Frames are an ideal solution when
installation space is a premium.
The steel framework provides sufficient durability for
environments such as risers or shafts. The design allows
maximum access to the internal equipment through the
top, base and side entrances. The wall mounting frame
can also be a cost effective solution for smaller networks
and workgroups where a cabinet is not required.
Accessories
A full range of cabinet accessories are available including Wall Mounting
Frames, PDU’s, Fixed Shelves, Telescopic Shelves, Castors, Cage
Nuts, Baying Kits, Roof Mounting Fan Units and Plinths. See page 66.
65
Cabinet
Accessories
Features & Benefits
All accessories colour match our
range of cabinets
Castors are available in 3 sizes, so will
meet any requirements
Baying kits allow up to 5 cabinets to
be joined together
The Rax range of cabinet accessories complement
the variety of floor standing and wall mounted
cabinets. Combined together, these products offer a
complete cable patching solution.
Heavy duty or lightweight castors and jacking feet can be
fitted to raise the cabinet clear of the floor. Castors allow
the cabinet to be moved across even surfaces and
jacking feet level out unequal ground. Cage nuts are
used to fix internal equipment into the cabinet. Baying
kits and earth bonding kits enable two cabinets to be
joined together. Grey painted steel plinths fit beneath the
cabinet to allow cable access from the base, sides and
rear and are available in various widths and depths.
Shelves are available in three different formats: fixed,
cantilever and telescopic. Cantilevers and fixed shelves
are pressed steel, fitting horizontally between the
uprights. Telescopic shelves operate a slide in-out
feature.
Product Description
Part Number
19” Cabinet baying kit
Jacking feet
Standard Castors (set of 4)
Medium Duty Castors (set of 4)
Heavy Duty Castors (set of 4)
Cage nuts (pk. of 50)
Earth bonding kit (set of 4)
009-000-005-17
009-000-005-04
009-000-005-01
009-000-005-02
009-000-005-03
009-000-001-00
009-000-005-28
Fixed Shelf 440mm deep
Fixed Shelf 570mm deep
009-000-005-06
009-000-022-46
Fixed
Fixed
Fixed
Fixed
009-000-018-05
009-001-018-10
009-000-018-20
009-000-018-25
Server
Server
Server
Server
Shelf
Shelf
Shelf
Shelf
720 deep 50kg
720 deep 100kg
820 deep 50kg
820 deep 100kg
Cantilever Shelf 190mm deep
009-000-020-01
009-000-020-02
009-000-020-03
Telescopic Shelf 440mm deep
Telescopic Shelf 570mm deep
009-000-005-22
009-000-005-23
Telescopic
Telescopic
Telescopic
Telescopic
Server
Server
Server
Server
Plinth
Plinth
Plinth
Plinth
x
x
x
x
600
600
780
780
Shelf
Shelf
Shelf
Shelf
720
720
820
820
deep
deep
deep
deep
600mm
780mm
600mm
780mm
Server Plinth 600 x 1040mm
Server Plinth 800 x 1040mm
66
50kg
100kg
50kg
100kg
009-000-024-05
009-000-024-10
009-000-024-20
009-000-024-25
009-000-005-15
009-000-005-16
009-000-005-40
009-000-005-41
009-000-129-05
009-000-129-10
Roof Mounting
Fan Units / PDU’s
Features & Benefits
3 sizes of horizontal PDU’s available
6 sizes of vertical PDU available
All PDU’s are supplied with 2 metre
mains cable
Fan units available as two or four way
Product Description
PDU
PDU
PDU
PDU
PDU
PDU
PDU
PDU
PDU
4 Way Horizontal
5 Way Horizontal
6 Way Horizontal
4 Way Vertical
5 Way Vertical
6 Way Vertical
8 Way Vertical
10 Way Vertical
12 Way Vertical
Part Number
009-000-005-24
009-000-005-25
009-000-005-26
009-000-005-07
009-000-005-08
009-000-005-09
009-000-005-10
009-000-005-11
009-000-005-12
Product Description
Roof
Roof
Roof
Roof
Mounting
Mounting
Mounting
Mounting
2
4
2
4
way
way
way
way
fan unit
fan unit
Server fan unit
Server fan unit
Part Number
Power Distribution Units
A full range of Power Distribution Units are available in
various formats containing 13 sockets. Horizontal units
are standard 19” format to fit between the uprights.
Vertical units are usually placed at the back of the
cabinet. Each PDU is supplied with a two metre mains
cable.
Roof Mounting Fan Units
Roof Mounting Fan Units are available in 2 or 4 unit
variations. Situated in the top of the cabinet, they ensure
a good flow of air through the cabinet, and thus reduce
the overheating problems with the internal equipment.
009-000-005-13
009-000-005-14
009-000-128-10
009-000-128-05
67
Smart Gigabit
Switch
Features & Benefits
Web User Interface
Trap message generation for proactive
management
16 or 24 copper 10/100/1000Mbps – any
speed Ethernet
3 Year warranty and advanced replacement
IEEE802.3x Flow Control
Port based VLAN
19” Rack Mountable
The WEB Smart Core Engine Gigabit Switch has 16
or 24 auto negotiating ports for 10/100/1000Mbps
Ethernet. Two further copper ports provide
connection for any speed Ethernet including
1000BASE-T Gigabit.
The WEB smart switch replaces the traditional console
port with a WEB interface. Individual port settings
including operating mode, flow control, QoS queue
assignment & VLAN membership can be configured
while comprehensive statistical information can be
obtained. A simple to use software utility facilitates
changing the default IP address and receiving trap
messages generated by the switch.
Gigabit ports can be combined as a trunk for faster interswitch connectivity. The 16 port switch is capable of
creating 2 trunks and the 24 port 3 trunks each having
either 2 or 4 ports. Analysis of network problems is
facilitated by a flexible port mirroring facility.
Product Description
Networx Web Smart Core Engine 16 port
Networx Web Smart Core Engine 24 port
68
Part Number
010-100-200-36
010-100-200-44
Specification
IEEE802.3ab 1000BASE-T, IEEE802.3z Gigabit Ethernet
Interface
16/24 RJ4510/100Mbps N-Way,
Auto MDI/MDI-X
Switch Performance
Wirespeed Filtering & Forwarding
400KB Shared RAM buffer (24 port),
272KB shared Ram buffer (16 port)
8K MAC Address table (24 Port),
4K MAC address table (16 Port)
Management Capabilities
WEB based management interface
providing: Port based VLANS,
2 queue QoS, port trunking, port mirroring
Manual port configuration:
speed, Duplex, flow control, port statistics
Led Indicators
UNIT LED PWR: Illuminated when
power applied to unit
SYSTEM: flashes when
management system operating
PORT LED LNK/ACT: on when
connected, flashes with port activity
PORT 100Mbps LED: Illuminated when
link operating at 100Mbps
link operating 1000Mbps
Dimensions
440 x 210 x 44mm (W x H x D)
Environment
Operating Temperature 0°C to 40°C
Storage Temperature -10°C to 70°C
Operating humidity 10% to 90% non-condensing
Storage Humidity 5% to 90% non-condensing
Power Supply
Internal 100-240V AC, 50/60 Hz internal PSU
32 Watts (24 port), 25 watt (16 port)
EMI & Safety
FCC Class A, CE Mark Class A, VCCI Class A
Weight
2.1kg
Smart Switch
with Gigabit
Features & Benefits
Web User Interface
Trap message generation for proactive
management
24 or 48 10/100Mbps Auto-Negotiation
Ethernet Ports
4 Gigabit Ethernet Ports – 2 RJ45
1000BASE-T & 2 SFP GBIC
Port based VLAN
Specification
IEEE802.3ab 1000BASE-T, IEEE802.3z Gigabit Ethernet
Interface
24 or 48 RJ45 10/100Mbps N-Way, Auto MDI/MDI-X
2 RJ45 10/100/1000Mbps N-Way, Auto MDI/MDI-X
2 SFP mini-GBIC slots
Switch Performance
768KB Shared RAM buffer (24 port)
1536KB shared Ram buffer (48 port)
WEB based management
interface providing: Port based VLANS,
2 queue QoS, port trunking, port mirroring
Manual port configuration: speed, Duplex,
flow control, port statistics.
Led Indicators
SYSTEM: flashes when
management system operating
PORT LED LNK/ACT: on when connected,
flashes with port activity
link operating 1000Mbps
Dimensions
440 x 200 x 44mm (W x H x D)
Environment
Operating Temperature 0°C to 40°C
Storage Temperature -10°C to 70°C
Operating humidity 10% to 90% non-condensing
Power Supply
19 Watts (24 port), 24 watt (48 port)
EMI & Safety
FCC Class A, CE Mark Class A, VCCI Class AB
Weight
2.1kg (24 Port), 3.0kg (48 port)
The WEB Smart Edge Engine has 24 or 48 fixed auto
negotiating ports for 10/100Mbps Ethernet. Two
further copper ports provide connection for any
speed Ethernet including 1000BASE-T Gigabit.
Further expansion is available through a pair of miniGBIC slots allowing additional Gigabit ports to be added.
The WEB smart switch replaces the traditional console
port with a WEB interface. Individual port settings
including operating mode, flow control, QoS queue
assignment & VLAN membership can be configured
while comprehensive statistical information can be
obtained. A simple to use software utility facilitates
changing the default IP address and receiving trap
messages generated by the switch.
The copper gigabit ports can be combined as a trunk for
faster inter-switch connectivity. Analysis of network
problems is facilitated by a flexible port mirroring facility.
Product Description
Networx Web Smart Edge Engine 24 port
Networx Web Smart Edge Engine 48 port
Part Number
010-100-200-24
010-100-200-28
69
8 Port 10/100
+ 2 Gigabit Port Switch
Features & Benefits
Compliant with IEEE 802.3 standards
2 Gigabit Ethernet Ports
8 10/100Mbps Auto-Negotiation
Ethernet Ports
Auto MDI / MDI-X - no crossover cables
Supports full and half duplex modes
Compliant with EIA/TIA and IEEE
standards
19" Rack Mountable
3 year Warranty and Advanced
replacement
This 8 Port 10/100 switch plus two Gigabit ports is
built for the small workgroup with advanced
requirements.
Powerful but easy to use the Gigabit MDI / MDI-X ports
will link to any Ethernet port boosting uplink response
times and satisfy high demand. The compact design
allows the switch to look at home on the desk top or
(with the extended ears) in the 19" rack. The LEDs report
on port speed, link, activity, full / half duplex and
collisions.
Product Description
8 Port 10/100 Plus 2 Port 1000 BaseT Switch
70
Part Number
010-100-104-08
Specification
IEEE802.3z Gigabit Ethernet
Interface
8 RJ45 - Ethernet 10/100Mbps N-Way,
Auto MDI/MDI-X
2 RJ45 10/100/1000Mbps autosensing,
Auto MDI/MDI-X
Switch Performance
6K MAC address table
256KB Shared RAM Buffer
Led Indicators
PWR - Indicates power applied
LNK/ACT: Flashes when receiving data packets
PORT FDX/COL: Illuminated yellow
when Collision, permanently on Full Duplex Mode
PORT 100Mbps LED: Illuminated green
when link negotiated 100Mbps, amber at 1000Mbps
Dimensions
44 x 280 x 180mm (H x W x D)
19" Rack Mounted
Environment
Operating Temperature 0 to 50°C
Storage Temperature -10 to 70°C
Operating Humidity 10% to 90% non-condensing
Power Supply
30 watts (maximum)
EMI & Safety
FCC Class A, CE Mark Class A
VCCI Class A UL 1950, TUV En60950
Managed 24 port
Switch + Gigabit Option
Features & Benefits
24 10/100Mbps auto-Negotiation Ethernet
ports
IEEE802.1p QoS
19” rack Mountable
2 queue Quality of service – QoS
IEEE802.1Q VLAN Tagging
SNMP & WEB management
2 Optional 100BASE-FX Fibre Ports
Broad Management feature set
IEEE802.1D Spanning Tree
Front Mounted management console port
FCC Class A & CE approved
Specification
IEEE802.3z Gigabit Ethernet,
IEEE802.3ad Link aggregation
IEEE802.1D spanning tree, IEEE802.1p QoS,
IEEE802.1Q VLAN (256 VIDs)
IEEE802.1X Port Security
Interface
24 RJ45 10/100Mbps N-Way Auto MDI/MDI-X
Module Slot allowing: 1 or 2 1000BASE-FX ports (SC)
1 or 2 1000BASE-X Ports (SC)
1 or 2 1000BASE-T ports (RJ-45)
RS-232 DCE Console port, (38400,N,8,1 No flow control)
Switch Performance
Wirespeed filtering and forwarding
Broadcast storm protection,
IGMP multi cast control
Port rate limiting – independent ingress and egress control
Port trunking (LACP), Port based VLAN (Local and 802.1Q)
2 Queue priority of service – high control
over queue service scheme
Port security – 802.1X, static MAC entry, MAC filtering
Port mirroring, Half and Fill duplex flow control
Led Indicators
DIAG: Power on self test successful/error
Dimensions
44x440x185 (HxWxD)
Environment
Operating Temperature: 0 to 50°C
Storage Temperature: -10 to 70°C
Operating Humidity: 5% to 90% non-condensing
Power Supply
Internal100-240V AC, 50/60 Hz Internal PSU
EMI & Safety
FCC class A, & CE approved
This managed switch combines flexibility and
sophisticated management facilities in a compact 1U
enclosure. A total of 24 fast Ethernet ports are
provided in a fixed configuration, these can be
supplemented by installing an optional module in the
expansion slot positioned on the front of the unit.
One or two 100BASE-FX fibre ports or one or two
1000BASE-X/1000BASE-T ports can be added.
A rich set of management features including highly
configurable priority queuing, traffic rate limiting and port
based inter switch VLANs are accessible through the
local console port, Telnet and a WEB browser
Product Description
Managed Edge engine 24 Port 10/100
Managed EE 1 Port 100Base-FX MM SC Module
Managed EE 2 Port 100Base-FX MM SC Module
Managed EE 2 Port 1000BaseT Module
Managed EE 1 Port 1000Base-SX MM SC Module
Managed EE 2 Port 1000Base-SX MM SC Module
Part Number
010-100-500-28
010-100-850-10
010-100-850-12
010-100-900-02
010-100-950-14
010-100-950-16
71
24 Port Smart
Switch
Features & Benefits
WEB user interface
Step by step installation guide
3 year Warranty and Advanced
replacement
Optional 100Mbps Fibre Port using rear
module slot
Port based VLAN
2 Queue Quality of service – QoS
The 24 port WEB Smart Switch has 24 fixed autonegotiating, auto MDI/MDI-X ports for 10/100Mbps
Ethernet.
The smart switch provides a level of configuration
capability superior to many other units considered to be
in the same class. The WEB smart switch replaces the
traditional console port with a WEB interface. Individual
port settings including operating mode, flow control, QoS
queue assignment & VLAN membership can be
configured while comprehensive statistical information
can be obtained. A simple to use software utility
facilitates changing the default IP address and receiving
trap messages generated by the switch.
A fibre optic 100BASE-FX port can be installed in the rear
expansion slot and becomes a 25th port.
Product Description
Networx WF Smart Switch
Networx WF Smart Fibre Module 100FX SC
Networx WF Smart Fibre Module 100FX ST
72
Part Number
010-100-150-24
010-100-300-02
010-100-300-04
Specification
IEEE802.3u 100BASE-TX fast Ethernet
Interface
24 RJ45 10/100Mbps N-Way, Auto MDI/MDI-X
Duplex SC or 2 x ST – Optional fibre module
Switch Performance
768KB Shared RAM Buffer
4K MAC address Table
WEB based management
interface providing; 2 queue QoS,
Manual port configuration:
speed, Duplex, Flow control
Led Indicators
SYSTEM: Flashes when management system operating
PORT LED LNK/ACT: On when connected,
FX PORT LNK/ACT: On when connected,
FX PORT FDX: On when fibre port set to Full Duplex
Dimensions
440 x 140 x 44mm (W x H x D)
Environment
Storage Temperature – 10 to 70°C
Operating Humidity 10% to 90% non-condensing
storage humidity 5% to 90% non-condensing
Power Supply
Internal 100-240V AC,50/60 Hz
internal PSU 14 watts (maximum)
EMI & Safety
Weight
2.1Kg
5, 8 and 16 Port
Switches
Features & Benefits
3 Year warranty and Advanced
replacement
Wirespeed Auto-Negotiating Switch
Compact metal desktop case
Screw head keyway facilitating wall or
under desk mounting
Silent Operation – no cooling fan
CE Mark and FCC safety standards
Specification
IEEE802.3x Flow Control (16 way Only)
Interface
5, 8 or 16 RJ45 10/100Mbps N-Way,
Auto MDI/MDI-X
Switch Performance
Wirespeed filtering and forwarding
Led Indicators
PORT LNK/ACT: On when
connected, flashes with Port activity
link negotiated 100Mbps
connecting correctly
Dimensions
440 x 44 x 140mm (W x H x D) – 16 Port
171 x 29 x 98mm (W x H x D) – 8 Port
115 x 70 x 25mm (W x H x D) – 5 Port
Environment
Operating Humidity 10% to 90% non-Condensing
Power Supply
Internal 100-240V AC, 50/60 Hz
internal PSU 6 watts max (16 port)
Input 7.5VDC 1A max 2.0 watts (5, 8 port)
EMI & Safety
FCC Class A (16 Port) FCC Class B (5,8 Port),
CE Mark A (16 port) CE Mark B (5, 8 Port)
VCCI Class A (16 port) VCCI Class B (5, 8 Port)
These switches are designed specifically for small
workgroups, with the choice of 5, 8 or 16 ports
depending on specific requirements.
All ports are auto-negotiating, auto-sensing,
10/100Mbps Ethernet. Presented on standards based
RJ-45 connectors. When a connected device device
supports auto-negotiation the switch and device will
automatically the best common mode of operation. If the
attached device does not support the auto-negotiation
then the switch will select the correct operating speed
and default to half-duplex mode. Each of the ports will
detect whether it needs to present itself as either an MDI
or an MDI-X to connect to the link peer. This means that
there is no need to worry about cross over cables or
uplink ports on connected devices.
Product Description
Part Number
010-100-100-05
010-100-100-08
010-100-150-16
73
7 port 10/100
+ 100FX SC Mini Switch
Features & Benefits
3 year warranty & advanced replacement
7 10/100Mbps auto-negotiation RJ-45
copper Ports
1 Port 100BASE-FX 100Mbps Fibre Port
Compact Metal Desktop Case
under desk mounting
Silent operation – no cooing fan
CE mark & FCC safety standards
This Switch provides 7 auto-negotiating/autosensing 10/100Mbps Ethernet ports presented on
standards based RJ-45 connectors. When a
connected device supports auto-negotiation the
switch and the device will automatically select the
best common mode of operation. If the attached
device does not support auto-negotiation then the
switch will select the correct operating speed and
default to half-duplex mode.
In addition there is a 100BASE-FX 100Mbps Ethernet
port providing connectivity to multi-mode fibre optic data
cabling allowing a link of up to412m in half duplex mode.
By using the DIP switch, the fibre port can be configured
for full duplex operation. In this mode 2km link lengths
are possible.
Specification
IEEE802.3u 100BASE-TX/FX Fast Ethernet
IEEE802.3x full duplex flow control
Interface
RJ45 10/100Mbps N-Way, auto negotiation
Duplex SC for 100BASE-FX
Switch Performance
Address Table Size
8000 entries
Led Indicators
PORT LNK (const)/ACT (flash),
Green – 100Mbps, Amber – 10Mbps
PORT FD (const)/COL (flash):
Indicates Full Duplex or collision event
UNIT LED PWR: Illuminated when connecting correctly
Dimensions
171 x 29 x 98mm (W x H x D)
Environment
Operating Temperature 10% to 90% non-condensing
Power Supply
Input 5VDC 2.4A (Max 12.0 watts)
EMI & Safety
FCC Class B, CE Mark B, VCCI-B
Weight
660g
Product Description
7 Port 10/100 + 100FX SC Mini Switch
74
Part Number
010-100-102-07
4000 Series 5 Port
Ethernet Switch
Features & Benefits
Wirespeed 5 port Auto-Negotiating
switch
IEEE 802.3 Standards (Broadcom chip)
Replaces any standard single gang
87mm x 87mm Outlet
The Connectix Active 4000 outlets offer four active
Ethernet ports in a stylish neat single gang outlet.
The IDC uplink version is the ideal solution for upgrading
an existing single data outlet to four ports. By removing
the old outlet and re-terminating the existing cable into
the Active 4000 extra ports can be added without the
disruption of running new cables.
The RJ45 uplink version has been designed for quick and
easy connection. This switch can either be used as a 5
port stand-alone switch or an extension from another
switch (or outlet)
Specification
Interface
Switch Performance
Led Indicators
Dimensions
Environment
Power Supply
EMI & Safety
EEE802.3u 100BASE-TX Fast Ethernet
4 x RJ45 10/100 autosensing
1 x RJ45/IDC 10/100Mbps
autosensing Uplink
Wirespeed
Per Port: LNK/ACT; illuminated
when successfully connecting
with compliant device
Per Unit: PWR; Illuminated
when power supply is connected
87 x 87 x 28mm (HxWxD)
0° to 45°C (32° to 113°F)
External Power supply included
Input: 240V AC BS136A
Ouptut: 12V DC 0.8A
frequency: 47 Hz to 63Hz
FCC Class B, cUL, UL & CE approved
Both products in this range are the same size as a
standard faceplate (87mm x 87mm), and will fit over
existing back boxes making installation is quick and easy.
Additional features include auto negotiation between 10
and 100Mbps; Auto MDI/MDIX, eliminating the need for
crossover cables and blue led activity lights for each port.
Product Description
Active 4000 RJ45
Active 4000 IDC
Part Number
010-200-001-05
010-200-001-01
75
16 Slot Rack
Mountable Chassis
Features & Benefits
High density - 16 converters in just 2u
Hot swappable converter modules and
PSU’s - no need for downtime
Fully isolated slot power supplies
Can offer SNMP or WEB management
(optional module)
The sixteen bay chassis offers the user a secure
environment for multiple media conversion
application.
Specification
16 Slot Rack Mountable Chassis
Dimensions
Environment
The chassis is capable of accepting a pair of high quality
power supplies offering load share redundancy with hot
swap functionality. Converters are hot swappable and
can be loaded or removed without powering down the
chassis. Two high quality, long life cooling fans ensure a
cool operating environment.
Power supply
EMI & Safety
Weight
440 x 88 x 350 (W x H x D)
Storage Humidity 5% to 90% non condensing
Internal 90-260V, 47/63Hz internal PSU
FCC Class A, CE Mark Class A, VCCI-A
6100g (No converters & 1PSU)
Smart Management Module for 16 Slot Converter Chassis
DB-9 for RS-232
RJ45 10/100BASE-T, N-Way, auto MDI/MDI-X
Management capabilities
SNMP, SNMP Traps, WEB,
Telnet, Local Console
Protocol Support
ARP, TCP/IP, SNMP, HTTP, Telnet
LED Indicators Power 1 & 2 – indicates PSU Power Good (green)
Dimensions
88 x 120 x 25mm
Environment
EMI Safety
An optional extra for the chassis is the Smart redundant
Power supply. Its load balanced, hot swappable
operation provides continuous operation in the unlikely
event that a power supply should fail. Alternatively the
PSU is powerful enough to support the operation of a
fully populated chassis.
Interface
The Networx Management module is another optional
extra, when installed adds facilities for remote real time
management, proactive indication of events though trap
messages and ability to configure redundant links.
Smart Redundant Power Supply for 16 Slot Converter Chassis
It is able to support the Networx range of smart
converters
Power Supply
Output to chassis backplane – 12v, 12.5A 150 Watts
Overload protection on all outputs against
short circuit with auto recovery
EMI & Safety
FCC Class A, CE Mark Class A, VCCI-A
CUL, TUV, CB-Certificate
Product Description
Networx 16 slot Rack Mountable Chassis
Networx smart management module
for 16 slot Convertor chassis
Networx Smart Redundent Power Supply
for 16 Slot Convertor Chassis
76
Part Number
010-003-008-96
010-003-008-25
010-003-008-98
Converters
Features & Benefits
Compliant with IEEE 802.3z Gigabit
Ethernet standard (1000 SC)
Compliant with IEEE 802.3 standards
(100 SC/ST)
3 Year warranty and advanced
replacement
under desk mounting
Extensive LED Indication
Product Description
Networx Smart 1000T to 1000 SX SC
550m Converter
Networx Smart 10/100 to 100 FX MM SC
2km Converter
Networx Smart 10/100 to 100 FX MM ST
2km Converter
Part Number
010-003-008-70
010-003-008-34
010-003-008-35
Specifications
Interface
The media converter was specifically designed to
offer the network designer the tools for migration
from copper to fibre.
IEEE802.3z Gigabit Ethernet
(010-003-008-70)
IEEE802.3u 100BASE-FX Fast Ethernet
Duplex SC (010-003-008-34, 010-003-008-70)
Duplex ST (010-003-008-35)
RJ45
Connectix offer a full range of converters to suit the
requirements of migration or expansion of existing
networks with minimum cost and complexity.
10/100 to 100FX MM 2km Converter are available in
both SC or ST versions, if requirements are more
demanding then the Smart 1000T to 1000 SX SC 550m
Converter is the ideal solution for Gigabit applications.
If a number of converters are being installed we
recommend the use of the 16 slot chassis, which is
suitable for use in any 19” frame.
Optical Characteristics
Specifications (cont.)
Center Wavelength
Optical Characteristics (cont.)
Min 830nm, Typ 850nm, Max 860nm
(010-003-008-70)
Min 1300nm (010-003-008-35),
Min 1308nm (010-003-008-34)
Output Power
Min -9.5dBm, Max -4dBm (010-003-008-70)
Min -20dBm, Max -14dBm (010-003-008-35)
Min -19dBm, Max -14dBm (010-003-008-34)
RX Sensitivity
-18dBm (010-003-008-70)
-31dBm (010-003-008-35) (010-003-008-34)
Power Budget
Min 7.5dB, Max 14dB (010-003-008-70)
Min 11dB, Max 17dB
(010-003-008-35) (010-003-008-34)
Typical Distance
50/125um 400 or 500MHz=km
(010-003-008-70)
Modal Bandwidth 550m
50/125um 400MHz=km Modal Bandwidth 500m
62.5/125um 200MHz=km Modal Bandwidth 220m
62.5/125um 160MHzkm Modal Bandwidth 200m
Typical Distance
62.5/125um 2,000m
(010-003-008-35) (010-003-008-34)
LED Indicators
PWR: Illuminated for normal operation
PORT/LNK/ACT: Flashes when receiving data packets
PORT FDX/HDX: Indicates Duplex Mode
PORT LINK FAIL: Indicates Source of Link Fault Signal
Dimensions
88 x 25 x 120mm (H x W x D)
Environment
Operating temperature 0 to 40°C
Operating Humidity 10% to 90% non condensing
Storage humidity 5% to 90% non-Conensing
Power Supply
7.5v dc @ 1.5A
EMI & Safety
FCC Class b, CE Mark B, VCCI-B
FCC Part 15 Class A & CE approved
77
UTP Telco
Patch Panels
Features & Benefits
Allows telecommunications on a data
network
Attractive black finish
Hydra Telcon leads made to order
When installed as part of a flood wired structured
cabling system, Connectix Telco Patch Panels
provide
the
option
to
run
data
and
telecommunications across the same network.
Connectix Telco panels are available in three different
variants, 16 RJ45 to 1 50 Way Telco, 24 RJ45 to 1 50
Way Telco and 24 RJ45 to 2 50 Way Telcos. The panels
consist of RJ45 sockets and Telco connectors.
Telco leads are patched into the female sockets in the
rear of the panel and the circuitry then integrates the
Telco connections and RJ45 jacks.
The panels provide hook and loop cable retainers at
either end for bundling cables. Each RJ45 port is
numbered with a removable designation label protected
by an acetate strip.
Mechanical Specification
Width
Depth
Height
Material
Finish
Socket Labels
RJ45 Sockets
Cable Guide
Telco Sockets
Configurations
78
19” (483mm)
35mm
1U (44mm)
9mm numbered card, with acetate cover
RJ45 unshielded vertical jacks
Left or right cable entry with
hook and loop retainers at either end
Female receptacles
16 RJ45 to 1 50 Way Telco
24 RJ45 to 1 50 Way Telco
24 RJ45 to 2 50 Way Telcos
Wiring Specification
24 Way RJ45 - 2 Way Telco (10 Base-T)
RJ45 No.
1
2
3
4
RJ45 Pin
1 2 3 6 1 2 3 6 1 2 3 6 1 2 3 6
Telco(1) Pin
26 1 27 2 28 3 29 4 30 5 31 6 32 7 33 8
RJ45 No.
7
8
9
10
RJ45 Pin
1 2 3 6 1 2 3 6 1 2 3 6 1 2 3 6
Telco(1) Pin
38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20
RJ45 No.
13
14
15
16
RJ45 Pin
1 2 3 6 1 2 3 6 1 2 3 6 1 2 3 6
Telco(2) Pin
26 1 27 2 28 3 29 4 30 5 31 6 32 7 33 8
RJ45 No.
19
20
21
22
RJ45 Pin
1 2 3 6 1 2 3 6 1 2 3 6 1 2 3 6
Telco(2) Pin
38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20
24 Way RJ45 - 1 Way Telco
RJ45 No.
1
2
3
4
RJ45 Pin
4 5 4 5 4 5 4 5
Telco(1) Pin
1 26 2 27 3 28 4 29
RJ45 No.
13 14 15 16
RJ45 Pin
4 5 4 5 4 5 4 5
Telco(1) Pin
13 38 14 39 15 40 16 41
16 Way RJ45 - 1 Way Telco
RJ45 No.
1
2
3
4
RJ45 Pin
4 5 4 5 4 5 4 5
Telco(1) Pin
1 26 2 27 4 29 5 30
RJ45 No.
9 10 11 12
RJ45 Pin
4 5 4 5 4 5 4 5
Telco(1) Pin
13 38 14 39 16 41 17 42
5
6
7
8
5
6
1 2 3 6 1 2 3 6
34 9 35 10 36 11 37 12
11
12
1 2 3 6 1 2 3 6
46 21 47 22 48 23 49 24
17
18
1 2 3 6 1 2 3 6
34 9 35 10 36 11 37 12
23
24
1 2 3 6 1 2 3 6
46 21 47 22 48 23 49 24
9
10
11
12
4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5
5 30 6 31 7 32 8 33 9 34 10 35 11 36 12 37
17
18
19
20
21
22
23
24
4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5
17 42 18 43 19 44 20 45 21 46 22 47 23 48 24 49
5
6
7
8
4 5 4 5 4 5 4 5
7 32 8 33 10 35 11 36
13
14
15
16
4 5 4 5 4 5 4 5
19 44 20 45 22 47 23 48
Product Description
Connectix 16 RJ45 to 1 50 Way Telco
UTP Patch Panel
UTP Patch Panel
UTP Patch Panel
Part Number
009-004-001-16
009-004-001-24
009-004-002-24
50 Way
Voice Panel
Features & Benefits
50 voice ports in 1U
8-way RJ45 sockets with three pairs
connected
Analogue, Digital and ISDN systems
supported
Product Description
50 Way Voice Panel
Part Number
009-001-002-10
Specification
Width
Depth
Height
Material
Finish
Socket Labels
IDC Labels
RJ45 Sockets
IDC Blocks
PCB
Wiring Spec.
19” (483mm)
120mm
1U (44mm)
1.5mm thick mild steel CR4 BS1449
Black Powder Coat to BS6496
Silk screened blocks
Pairs indicated by PIN numbers
2 x 5 unshielded stacked RJ45 jacks
Industry standard 4 way IDC’s
1.6mm Double Sided PTH boards
Pairs 1, 2 & 3 connected straight through.
Pair 4 not connected
Cabinet space is too valuable to have it taken up by
stacks of voice panels. That is why Connectix now
offer a high-density voice panel packing 50
dedicated voice ports in a 1U panel.
Each 8-way RJ45 socket has three pairs connected. This
ensures that the panels can be used with analogue,
digital and ISDN systems. Designed to match the data
panels in the Connectix range it will also accept the
Connectix Cable Tidy Rings so no additional rack space
gets taken up by cable management panels.
79
Voice
Convertor
Features & Benefits
Extra compact design provides a neat,
small and attractive installation
Converts data outlets into
telecommunication ports
White finish
Available custom wired in various
colours and lengths
Connectix Voice Convertors (VC) utilise a standard
UK telephone socket and RJ45 plug to enable
telecomms equipment to be connected to structured
cabling systems.
Available in Full Master, PABX Master and Secondary
variants, the adaptors have a unique compact design,
making them neat and attractive when installed.
Product Description
Connectix
Connectix
Connectix
Connectix
Connectix
Part Number
Full Master VC 150mm
PABX VC 150mm
Secondary VC 150mm
RJ45 - RJII VC 150mm
ISDN-RJ45 Leaded Adaptor
007-006-001-15
007-006-002-15
007-006-003-15
007-006-001-07
008-004-001-01
Voice Converter
The VC provides the end user with the flexibility to run
various telecommunication applications including
telephones and modems through the RJ45 modular
outlet.
Using a VC eliminates the problems associated with
installing separate telephone and data systems on the
same premises. By flood wiring the network, installers
may alternate between data and telecomms within the
structured cabling system. VC’s are supplied leaded in
lengths of 50mm and 150mm, or in special lengths to
order.
Full Master
PABX Master
Secondary Master
Capacitor
✓
✓
✗
Resistor
✓
✗
✗
Mechanical Specification
Width
Length
Height
Finish
Socket
Plug
22mm
53mm
22mm
White Matt
Standard UK telephone
RJ45
Wiring Specification
Full Master
RJ45 Plug (T568B)
PABX
Phone Jack
= Capacitor (1µ8M250)
80
Surge Arrestor
✓
✗
✗
RJ45 Plug (T568B)
Secondary
Phone Jack
= Resistor (0.25W, 470KΩ)
RJ45 Plug (T568B)
Phone Jack
= Surge arrestor
Voice
Cabling
Features & Benefits
Cables conform to BT specification
Industry standard Box Connections in
a wide range of sizes
Flush or Surface mount Line Jack
outlets with combined telephone or
data optional
Cost effective Voice Cabling
CW128 & CW1308B also in stock
Product Description
CW1308 3 Pair Phone Cable
CW1128 & CW1308B are also available
from stock in various pair combinations.
Part Number
001-008-003-03
001-008-003-10
001-008-003-20
001-008-003-25
001-008-003-50E
001-008-003-100E
001-008-003-200E
001-008-003-320E
2/1A Line Jack unit
2/2A Line Jack unit
2/3A Line Jack unit
3/1A Line Jack unit
3/2A Line Jack unit
3/3A Line Jack unit
4/1A Line Jack unit
4/2A Line Jack unit
4/3A Line Jack unit
237A Connector strip
51A Designation strip
006-006-006-00
006-006-009-00
006-006-019-00
006-006-007-00
006-006-010-00
006-006-012-00
006-006-008-00
006-006-011-00
006-006-008-02
006-006-001-00
006-006-002-00
201D, 20 Pair Box Connection (includes strips)
251A, 50 Pair Box Connection (empty)
301, 100 Pair Box Connection (empty)
5B, 10 Pair Protector Mounting
21A, Gas Tube Arrestor
006-006-004-00
006-006-004-01
006-006-005-00
009-000-510-00
009-000-520-00
006-006-003-00
006-006-003-01
BT Type Extension Lead 1m
003-600-010-01
Compact PABX Phone Module
Compact Secondary Phone Module
Compact Full Master Phone Module
008-001-001-17
008-001-001-18
008-001-001-19
RJII, 4 Wire Plug
4 Core Flat Cable - White
4 Core Flat Cable - Black
006-003-017-00
001-008-004-42
001-008-004-41
The Connectix range of voice products provides
extensive
solutions
for
telecommunication
applications.
CW1308 cable is available with 2, 3, 10, 20, 25, 50 and
100 pairs, suitable for IDC terminations. Box connections
offer various capacities for voice cables. The modular
designed 301A allows 100 pairs, the 251A with built in
cable management for 50 pairs, 201D low profile for 20
pairs and 510 or 520 box connections with knock-outs
allowing side-by-side mounting for 340 and 680 pair
cables. Flush or surface mounting voice outlets in single
and dual variants, with optional mixed telephone and
data sockets for combined computer and
telecommunication networks are available. We also stock
standard telephone extension leads in various lengths.
Individual 237A IDC strips are available for use in Box
Conn termination applications.
81
Mini and Maxi
Trunking
Features & Benefits
Clip on lids make installation quick and
trouble free
Manufactured to BS EN 50085
Manufactured from High Impact Grade
PVC-U
Full range of clip-on fittings available
Available in self-fixing version
The Connectix Mini and Maxi Trunking ranges are
designed and manufactured by Marshall Tufflex.
Both have been designed to give a clean uncluttered
profile with superb finish.
The body of the mini trunking is strong and tough and will
take up irregularities in wall and ceiling surfaces with
ease. The ingenious clip-on lid gives the utmost security
and yet is capable of being easily removed by the installer
for maintenance or alteration to the cabling system.
Both ranges are manufactured in extra super high impact
grade of PVC-U in order to withstand the most rigorous
conditions and are produced in a carefully selected
shade of white.
The Trunking is also available in self-fixing form with
double sided tape for ease of installation. This will stick to
all sorts of dust-free surfaces – wood, plaster, plastics,
metals, brick, paint work, paper, glass – in fact almost
any clean, dry, dust-free surface.
82
Maxi Trunking
Product Description
Maxi Trunking (White) 38x25mm
1x3 Metre (MMT4)
Self Adhesive Trunking 38x25mm
1x3 Metre (MMT4SF)
Internal Bend 38x 25mm (TIB4)
External Bend 38x25mm (TEB4)
Flat Bend 38x25mm (TFB4)
End Cap 38x25mm (TEC4)
Mini Trunking
Product Description
Mini Trunking (White) 25x16mm
1x3 Metre (MMT2)
Self Adhesive Trunking 25x16mm
1x3 Metre (MMT2SF)
Internal Bend (White) 25x16mm (TIB2)
External Bend (White) 25x16mm (TEB2)
Flat Bend (White) 25x16mm (TFB2)
End Cap (White) 25x16mm (TEC2)
Entry Gland (White) 25x 16mm (TA3/2/C)
Equal Tee (White) (TT2-2)
Surface Box Adapter (White) (TA2)
Part Number
012-003-001-00I
012-008-004-0I
012-003-002-00
012-003-003-00I
012-003-004-00I
012-003-005-00I
Part Number
012-002-001-00I
012-008-002-0I
012-002-002-00I
012-002-003-00I
012-002-004-00I
012-002-005-00I
012-002-006-00I
012-002-007-00I
012-002-008-00I
Dado
Trunking
Features & Benefits
Ideal for new buildings and
refurbishments
Three discrete compartments to allow
separation of services
Attractive surface mount design
Large range of fittings available
Designed and Manufactured by
Marshall Tufflex
Product Description
Dado Base Unit 3 Metre (ETB1)
Dado Main Compartment Lid (ETL1)
Dado Angled Cover (ETAC1)
Dado Coupler (ECP1)
Dado End Cap (EECP1)
Dado Internal Bend (EIBP1)
Dado External Bend (EXBP1)
Dado Flat Angle (EFA1)
Dado PVC Single Gang Back Box 30mm (ESSB1)
Dado PVC Dual Gang Back Box 30mm (ESSB2)
Part Number
012-001-005-00I
012-001-006-00I
012-001-007-00I
012-001-008-00I
012-001-009-00I
012-001-010-00I
012-001-011-00I
012-001-012-00I
012-007-003-01I
012-007-003 02I
The Sterling brand of Marshall Tufflex Dado Trunking
has been specifically designed for the modern office
environment. Sterling is a modular system ideal for
the transportation of data, communication and
power.
Ideal for new buildings and refurbishments and is suitable
for a wide range of applications in offices, laboratories
hospitals and workshops.
The base unit features elongated holes in the back for
ease of fixing. The main compartment lid clips on to the
base unit and can be cut to length as required for the
installation of fittings or the specially designed back
boxes. The unit is completed with the angled covers that
clip on to the upper and lower edges of the base unit to
provide further compartments.
A complete range of corners, flat angles, bends, tees,
back boxes and additional components are available to
facilitate professional installation.
83
Conduit
Features & Benefits
Light Gauge 25mm Overall Diameter
Extra Super High Impact material
Meets all the relevant standards
Quick and easy to install
Large range of fittings available
The Connectix Conduit range is manufactured by
Marshall Tufflex. It is manufactured from PVC-U,
which has been specially formulated to meet the
requirements of BS EN 50086, BS4607, BS6099 and
BS7671 (Wiring Regulations).
The conduit is produced in Extra Super High Impact
material which is capable of withstanding the most
hazardous conditions on site and which exceeds the
most stringent requirements of the British standards.
The range includes a wide variety of plain bored circular
boxes in various through, angle and tee configurations.
The boxes are suitable for suspending a load of up to
3kg centrally at 60°C maximum.
84
Product Description
25mm Conduit 3 Metre (CR3)
Circular Lid 50mm Flush (MCL1)
25mm Coupler (MC3)
25mm Inspection Bend (MIB3)
25mm Plain Bend (MNB3)
25mm Female Adapter (MAB3)
25mm Male Adapter (MA8)
25mm Spacebar Saddle (MSB3)
25mm Through Box (3MRB3)
Part Number
012-002-010-25I
012-002-017-00I
011-004-025-04
012-002-012-25I
012-002-011-25I
012-002-015-25I
012-002-014-25I
012-002-009-00I
012-002-016-25I
Back
Boxes
Features & Benefits
Single and Dual Gang boxes available
Earth terminal provision incorporated
Tough shatter resistant PVC
Designed for ease of use
Uncluttered internal design
Product Description
Dry lining Box Single Gang (MDLB1)
Dry lining Box Double Gang (MDLB2)
White PVC Single Gang Back Box
25mm (MSSB114)
White PVC Single Gang Back Box
32mm (MSSB116)
White PVC Dual Gang Back Box
25mm (MSSB214)
White PVC Dual Gang Back Box
32mm (MSSB216)
Part Number
012-006-001-00I
012-006-002-00I
012-007-001-25I
012-007-001-32I
012-007-002-25I
012-007-002-32I
Marshall Tufflex back boxes are manufactured from
moulded PVC-U. They are available in single and
dual gang with a choice of surface mounted and
flush mounted dry lined wall versions.
The surface mount boxes feature knock outs for mini
trunking adaptors and are available in standard single
gang (87 x 87mm) and dual gang (87 x 147mm) sizes;
with external depths of 25mm (23mm internal) and
32mm (30mm internal).
The dry lined wall boxes are also available in single or
dual gang with both versions having a depth of 34mm.
They are suitable for mounting in board with a thickness
of between 6 – 14mm and can easily cope with irregular
shaped aperture sizes. Swivelling snap out clamps will
grip any standard thickness of building board tightly.
85
AV Connector
Outlet
Features & Benefits
Conveniant termination point for AV
connectors
Internal sockets for easy installation
SVGA, Composite Video and Audio
Connectors
Mini Trunking entry point
Sleek low profile design
Custom colours available upon request
The Connectix AV outlet has been designed as a
convenient, fixed connection point for AV equipment
installed in hard to reach locations, such as ceiling
mounted projectors.
SVGA and Phono leads can be connected to the
projector, then run through mini trunking to the outlet and
simply plugged in to the internal connectors.
The sleek low profile unit is ideal for use in meeting
rooms, class rooms and board rooms.
Custom colours are available on request, and our custom
logo printing service is also available on this product.
86
Product Description
AV Connection Outlet
Part Number
009-003-002-10
Specification
Width
Depth
Height
Material
Connections
Cable Entry
95mm
25mm
100mm
Mild steel sheet CR4 to BSEN 130 - 1999 DC01
15 Way High Density D-Type bulkhead connector
3 x Phono - Phono connectors (Yellow, red & white)
Suitable for 25 x 16 mini trunking adapters (TA2)
Structured
Cabling Course
Features & Benefits
Gives delegates confidence to install and
test Connectix Cabling Systems correctly
Course details industry standards, LAN
topologies and installation techniques
Delegates experience “hands-on” link
testing, verification and troubleshooting
Each successful delegate is awarded with
a course certificate
No previous industry knowledge required
Correct installation procedures are a fundamental
part of todays structured cabling industry. We are
committed to ensuring that our cabling systems are
installed quickly, professionally and coincide with the
rapidly changing standards proposed by ISO/IEC
and EIA/TIA.
The one day Structured Cabling Installation Course
focuses on five key areas:
Structured cabling introduction and industry
overview
Installation practices
Overview of LAN topologies
Link testing, verification and troubleshooting
Industry standards
This course requires no previous knowledge of
structured cabling and aims to provide each delegate
with adequate knowledge, confidence and practical
experience for the future supervision and assessment of
system installations.
The course is run by a fully qualified Connectix Cabling
Systems structured cabling trainer who is constantly
updated in line with the rapidly changing standards and
latest network technologies.
Upon completion of the course an examination is taken
by each delegate and successful candidates are
awarded a certificate acknowledging their competence.
The course include a comprehensive theory session,
followed with a practical session in a fully equipped
installation room, allowing delegates to gain an
understanding of structured cabling systems and
installation techniques.
87
Fibre Optic
Termination Course
Features & Benefits
Gives delegates confidence to successfully
install and terminate fibre optic cables and
connectors
Course details fibre optic industry
overview, theory of light and health and
safety procedures
Delegates experience ‘hands-on’ fibre
optic testing, terminating and link
installation
Training for up to six delegates
Each delegate is issued with a course
certificate
Fibre optic links are becoming an increasingly
common part of cabling infrastructures. Installers
have to be competent when terminating, testing and
installing fibre optics. The Connectix Fibre Optic
Termination Course provides delegates with the
hands-on practical experience and theoretical
knowledge needed to successfully terminate fibres
on site.
The one day course focuses on 6 key areas:
Fibre optic introduction and theory of light
Fibre optic cables -bandwidths, specifications and
constructions
Fibre optic connectors
Practical terminations using the Lightcrimp+ system
Fibre optic test equipment, power meters and light
sources.
Health & Safety
88
The course begins with an in-depth theory session
followed by a ‘hands on’ practical session, including
termination of connectors on various fibre optic cable
constructions. The practical element also gives delegates
an experience of testing and troubleshooting fibre optic
links.
This course requires no previous knowledge of fibre
optics and aims to provide each delegate with suitable
knowledge for the termination and installation of cables
and connectors. Upon completion of the course each
delegate is issued a certificate acknowledging their
competence.
Voice Cabling
Installation Course
Features & Benefits
Gives delegates the confidence to install
and test telecommunication cabling
Overview of standards and installation
practices
‘Hands-on’ practical using live equipment
and simulators
Link testing, verification and
troubleshooting
A reliable Telecommunications system has always
been an integral part of any business. The Voice
Cabling course provides delegates with the practical
knowledge of correct installation and termination
procedures on both internal/external cables. The
course also covers relevant standards and testing in
a ‘real life’ environment.
The one-day course focuses on seven key areas:
Voice cabling introduction and industry overview.
Internal/External Multi-pair termination and testing.
Telecomms cabling design and modification.
ISDN – Theory and cabling standards.
Voice integration onto structured cabling.
Installation practices.
Link testing, verification and testing.
This course requires no previous industry knowledge,
although some experience of communications cabling
would be advantageous. The course is designed to
provide delegates with adequate knowledge and
confidence to install and test a telecommunicationscabling network. A fully qualified installation engineer who
is constantly updated in line with industry changes tutors
the course. Each successful delegate will receive a
certificate of competence upon completion.
The course begins with a comprehensive theory session
followed by a ‘practical’ involving the termination and
testing of a variety of internal/external multi-pair cables
and components. The delegates will experience standard
telephone circuits, structured cabling systems, and
exchange line simulators to give a ‘real life’
demonstration.
89
Installation
Practices
In order to meet the stringent requirements of the
ISO/IEC 11801 and TIA/EIA-568-B specifications for
Category 5 E and Category 6 wiring systems, it is
essential that the following guidelines are adopted. This
will ensure that the installation provides an efficient and
reliable service throughout it’s lifetime.
Do not use undue strain when cable pulling
(maximum 25lb)
Cables should not be joined to increase length. If
cables are found to be short they must not be rerouted by a less suitable path, but must be re-run.
Cables must be secured so as to relieve any
mechanical stress on the terminations.
Avoid high temperature environments, power cable,
lift shafts, switch gear and any other sources of
interference.
All cable runs should be concealed, and Cable
Routes e.g. mini-trunking, should run parallel or
perpendicular to walls.
When cable routes pass through walls the holes
must be sleeved and the cables exit and enter at
90° to the wall.
Cable ties must be finger tight only. Over tight ties
deform the geometry of the cable and effect its link
performance. They should not be so tight as to
distort the outer sheath of the cable.
Cable bundles should be limited to 50 cables to
avoid crushing the lower cables in the bundle.
Care must be taken to avoid kinks in the cable
during cable pulling.
Any cabling over suspended ceilings must be laid in
standard cable trays and supported every 1.2 to 1.5
metres to avoid any possible movement.
The minimum bend radius during installation is
75mm, and 25mm once installed.
90
All cables must be free of tension along the entire
route, and cable supports should be used to
distribute any strain.
All metallic conduit and trunking must be earth
bonded in accordance with the IEE wiring
regulations.
All cable exits must be bushed or sleeved so as not
to cause damage to the cable’s outer sheath.
Space should be left to allow for additional cables to
be run in the existing cable routes. It is
recommended that conduit and trays should not be
filled to more than 80% fill capacity therefore leaving
a minimum of 25% spare cable route capacity
available for future system expansion.
Wiring
Specifications
258A (EIA T568B)
8W
Chnl
Pin No
1
2
3
4
5
6
50 Posn
Telco
Pin No
26
1
27
2
28
3
29
4
30
5
31
6
32
7
33
8
34
9
35
10
36
11
37
12
38
13
39
14
40
15
41
16
42
17
43
18
44
19
45
20
46
21
47
22
48
23
49
24
50
25
USOC 8 Wire
258A
Pin No
Chnl
Cndr ID
5
4
1
2
3
6
7
8
5
4
1
2
3
6
7
8
5
4
1
2
3
6
7
8
5
4
1
2
3
6
7
8
5
4
1
2
3
6
7
8
5
4
1
2
3
6
7
8
-
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
-
Plug Specification
258A
Pin No
1
2
3
4
5
6
7
8
Chnl
Cndr
ID
T2
R2
T3
R1
T1
R3
T4
R4
8W
Chnl
Pin No
1
2
3
4
5
6
50 Posn
Telco
Pin No
26
1
27
2
28
3
29
4
30
5
31
6
32
7
33
8
34
9
35
10
36
11
37
12
38
13
39
14
40
15
41
16
42
17
43
18
44
19
45
20
46
21
47
22
48
23
49
24
50
25
10 Base-T
Usoc
Pin No
Chnl
Cndr ID
5
4
3
6
2
7
8
1
5
4
3
6
2
7
8
1
5
4
3
6
2
7
8
1
5
4
3
6
2
7
8
1
5
4
3
6
2
7
8
1
5
4
3
6
2
7
8
1
-
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
-
Plug Specification
Twisted
Pair
Colour
Wht/Org
Org/Wht
Wht/Grn
Blu/Wht
Wht/Blu
Grn/Wht
Wht/Brn
Brn/Wht
USOC
Pin No
1
2
3
4
5
6
7
8
Chnl
Cndr
ID
R4
T3
T2
R1
T1
R2
R3
T4
8W
Chnl
Pin No
1
2
3
4
5
6
7
8
9
10
11
12
50 Posn
Telco
Pin No
26
1
27
2
28
3
29
4
30
5
31
6
32
7
33
8
34
9
35
10
36
11
37
12
38
13
39
14
40
15
41
16
42
17
43
18
44
19
45
20
46
21
47
22
48
23
49
24
50
25
10 Base-T
Pin No
Chnl
Cndr ID
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
1
2
3
6
-
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R2
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R3
T2
R2
T3
R3
-
Plug Specification
Twisted
Pair
Colour
Brn/Wht
Wht/Grn
Wht/Org
Blu/Wht
Wht/Blu
Org/Wht
Grn/Wht
Wht/Brn
10 Base-T
Pin No
1
2
3
6
-
Chnl
Cndr
Jack
Colour
T2
R2
T3
R1
T1
R3
T4
R4
Blu
Org
Blk
Red
Grn
Yel
Brn
Slt
91
Head Office
Connectix Limited
33 Broomhills Industrial Estate
Braintree, Essex CM7 2RW
Telephone: 01376 346600
Facsimile: 01376 346620
Website: www.connectix.co.uk
Birmingham Office
Connectix Limited
Upper 1st Floor Suite
4 The Square,
Solihull B91 3RB
Telephone: 0121 705 8333
Facsimile: 0121 705 8686
Edinburgh Office
Connectix Limited
Unit B8, Midlothian Innovation Centre,
Pentlandfield, The Bush,
Midlothian EH25 9RE
Telephone: 0131 440 4012
Facsimile: 0131 440 4901
London Office
Connectix Limited
Unit F1, Lanterns Court
Mill Harbour
London E14 9TU
Telephone: 020 7536 5555
Facsimile: 020 7536 9741
Daventry Office
Nene House
Drayton Fields Ind Est
Daventry
Northants
NN11 5EA
Telephone: 01327 312622
Facsimile: 01327 300809
Dublin Office
Connectix Limited
29 Westlink Industrial Estate
Kylemore Road
Dublin 10, Ireland
Telephone: 01 6236751
Facsimile: 01 6236759

A5 CTX Cat Cover 2005 - Connectix Cabling Systems

Transcription

Similar documents

- Included with Park Millennium Cable TV Package

silly cable tech terms

linbeck group architect: hahnfeld hoffer stanford

www.vecsupply.com

View - Prince George Digitization

Setup Guide

CCTV Cabling Considerations - Berk-Tek

Swecomex - Global Marine Systems

Breaking Cities Across the Nation.pptx