mircom canada
Transcription
mircom canada
Mircom Fire / MNS Sales Binder www.mircom.com Fire Alarm & Detection Network Fire Alarm Systems Safer • Smarter • More Livable Buildings Intelligent Fire Alarm & Audio Network Solution FleX-NetName Series Model The Most Versatile and Powerful Systems in the Industry. Mircom’s FleX-Net Series is a powerful intelligent networkable fire alarm solution designed for medium to large-scale facilities. FleX-Net offers system designers many levels of flexibility to specify the ideal application of detection, control, notification and emergency communications. Feature such as fire detection & alarm, audio/voice evacuation, BACnet, Boolean logic, networking and graphical work stations allow this modular solution to accommodate the simplest systems up to the most complex solutions With the addition of the Advance Protocol (AP), Fire/CO detection and 520 Hz support on both the addressable loop and through the audio/voice evacuation, Mircom’s FleX-Net is poised to take you even farther into the future with expanded capabilities. • Advanced Protocol (AP) • Fire/CO support • 520Hz support • Audio/Voice Evacuation • Boolean Logic • Open Graphic Navigator • HVAC Fan and Damper Control • Building Management Systems (BMS) NYC Fire Dept. • Multiple System Configurations Supported • 63 Nodes per System • Copper & Fiber Optic Multi-Mode Networking APPROVED Mircom.com The FleX-Net Solution MASS NOTIFICATION COMMUNICATION FLOW Advanced Protocol (AP) Intelligent Devices Mircom’s Advanced Protocol (AP) devices use a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. Mircom’s Advanced Protocol uses a superior group polling method as well as an interrupt feature that provide for a faster response to an alarm condition. In addition, Advanced Protocol allows for greater system capacity with support for up to 318 devices per SLC circuit. The AP devices are backwards compatible to operate in CLIP mode for legacy system applications. For more information call 1.888.660.4655 or visit Mircom.com Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Mircom™, Flex-Net™ name and graphic design are the exclusive property of Mircom Technologies Ltd. MIR-FleXNet-SS_150050 Rev 2 MGC’S PRO-2000 SERIES Addressable gas, flame, smoke and thermal sensors are continuously monitored for alarm signals, malfunctions, open and/or short circuit conditions through a reliable and proven digital communication link. The operator is provided with analog values pertaining to combustible and toxic gas levels as well as the presence of a fire through the smoke or thermal sensors in the protected spaces. Designed to interface with other systems through an RS-485 data highway and using a thoroughly proven MODBUS RtU and/or Bacnet Communication protocol the PRO-2000 links directly to any host computer, Distributed Control System (DCS) and/or Emergency Shutdown System (ESS). The MGC PRO-2000 Fire & Gas Detection Control System is a distributed microprocessor based package, providing seamless integration of fire and gas detection within a single control panel. Our team of engineers and specialists will work with you to design the most cost efficient solution without compromising the protection of personnel, equipment and property. Other Projects • Long-term care facilities Enhanced reliability against short circuit conditions and RS-485 Splitter Module provides complete isolation for power and communication lines alike. Designed with safety and reliability in mind, the PRO-2000 affords end-users and operators continuous operation through protection against single-point-failure mode. • Manufacturing facilities • Government institutions • Schools and universities • Condominiums • Retail stores • Military bases A self diagnostic feature minimizes trouble shooting problems and makes system integration an easy and simple process. • Restaurants • Refineries • Hospitals • Hotels APPLICAtIONS Hundreds of hazardous environments can benefit from the versatility and flexibility of the PRO-2000 system. By combining and integrating in a single package the traditionally autonomous fire detection and PLC based gas detection systems, PRO-2000 redefines the words Safety, Reliability, and Confidence. BUILDING A Applications Including: • Liquid Propane Gas plants • Aircraft hangars • Power plants • tank farms • Offshore platforms • Naval & marine vessels • Chemical plants • Refineries • Oil Rig • Military applications • Agent releasing SEAMLESS INTEGRATION PROGRAMMING CAPABILIty • Analog addressable fire detection devices – thermal, smoke and manual call points • Adjustable alarm set point • Addressable flame and gas sensors – IR, UV, explosion proof and toxic gas sensors • Audible and visual alarm indicators • RS-485 communication with MODBUS protocol replaces the traditional 4-20 mA and provides two way communication • Extensive diagnostic capabilities simplify maintenance and calibration of gas transmitters • Fully compliant with NFPA 72 requirements • Approved for releasing service • Programmable logic for alarm annunciation, alarm evacuation, smoke control and release of fire extinguishing agent • Centralized and/or distributed MODBUS Interface for Distributed Control System (DCS) and/or Emergency Shutdown System (ESS) • Control of safety mimic matrix for fire & gas devices • Local display of status for each field device • Electrical isolation for loop circuits and serial interface lines • Hardwire capability for critical Emergency Shutdown System (ESS) signals and functions FLEXIBILITY FLE LEXIBILITY & RELIABILITY • Closed loop communication • Local panels may be used as local annunciators • Graphic interface – geographic synoptic board • Display unit • Optional 100% redundancy APPROVALS • UL 864 rev.9 • ULC • ABS • USCG • CCG BUILDING B BUILDING C MGC-PRO2000-BR_rev07/12 www.mircomgroup.com CORPORATE/CANADA 25 Interchange Way Vaughan, Ontario L4K 5W3 Tel: 888.660.4655 Fax: 888.660.4113 USA 4575 Witmer Industrial Estates Niagara Falls, N.Y. 14305 Tel: 888.660.4655 Fax: 888.660.4113 INTERNATIONAL 25 Interchange Way Vaughan, Ontario L4K 5W3 Tel: 905.660.4655 Fax: 905.660.4113 Corporate head office and manufacturing facility, Vaughan, Ontario, Canada About the Mircom™ Group of Companies The Mircom Group of Companies (MGC™) is North America’s largest independent designer, manufacturer and distributor of advanced Fire Detection & Alarm, Voice Evacuation & Communication Systems, and Controlled Access & Security Solutions, serving the global marketplace for over 20 years. MGC owns the Mircom™, Secutron™, and Summit™ branded line of products. With corporate headquarters located in Toronto (Vaughan), Ontario, Canada and Niagara Falls, New York, U.S.A., MGC operates a dedicated network of sales and service branch offices throughout North America and abroad, under its Mircom Engineered Systems™ brand (Mircom ES™). MGC Systems International Limited supports the sales and installation of MGC systems in more than 50 countries worldwide, with regional offices located in Mexico City, Mexico; Buenos Aires, Argentina; Bangalore, India; Dubai, UAE; and Singapore. Under its United Export Corporation (U.E.C.™) division, MGC distributes a broad range of exceptional fire protection equipment to more than 70 international markets. Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Mircom™, MGC™, Secutron™, Summit™, Mircom Engineered Systems™, Mircom ES™ and U.E.C™ names and graphic design are the exclusive property of 7049587 Canada Ltd., used under licence by Mircom Technologies Ltd. LISTED Buildings Existing HOUSE PANEL Addressable Fire Alarm Systems Safer • Smarter • More Livable Buildings Intelligent Fire/Agent Release Control Units FX-3500Name Series Model Intelligent Addressable Fire Alarm with Releasing Control Mircom’s FX-3500 Series systems are powerful Intelligent Fire/Agent Release Control Units that are UL/ULC listed for fire alarm services, including releasing service. The FX-3500 Series provides up to three intelligent Data Communication Links (DCLs) / Signaling Line Circuits (SLCs) that support a new AP protocol, which is faster and has capacity for up to 954 intelligent devices. In addition, the FX-3500 Series has backward compatibility support for CLIP devices. The FX-3500 Series systems are recommended for both new and retrofit fire detection and/or special-hazard/critical-infrastructure suppression/special agent applications. Capable of releasing up to six discrete physical hazard zones, the FX-3500 offers exceptional value for complex installations. Programming versatility makes the FX-3500 Series the ideal choice for dependable fire detection, signaling and protection in industrial, commercial and institutional buildings. Safer • Sm • New fast AP protocol, extending number of devices on the loops, up to 954 (318 X3) • Panel supports both AP and CLIP protocol • Uses USB security key Shown with 2 optional RAX-1048TZDS modules • Utilizes the universal box • Six dedicated hazard zones • Utilizing cross-zoning or counting detection • Has a 4X20 line display APPROVED NYC Fire Dept. • Flush or Surface mountable with no additional hardware required Mircom.com FX-3500 Solution NETWORK (WIRED COMMUNICATION) DIAGRAM Advanced Protocol (AP) Intelligent Devices Mircom’s Advanced Protocol (AP) devices use a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. Mircom’s Advanced Protocol uses a superior group polling method as well as an interrupt feature that provide for a faster response to an alarm condition. In addition, Advanced Protocol allows for greater system capacity with support for up to 318 devices per SLC circuit. The AP devices are backwards compatible to operate in CLIP mode for legacy system applications. For more information call 1.888.660.4655 or visit Mircom.com Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Secutron™ name and graphic design are the exclusive property of Mircom Technologies Ltd. MIR-FX3500-SS_130065 v6 02/16 Conventional Fire Alarm Systems Releasing & Suppression Control Units Safer • Smarter • More Livable Buildings Intelligent Fire/Agent Release Control Units FX-3500Name Series Model Intelligent Addressable Fire Alarm with Releasing Control Mircom’s FX-3500 Series systems are powerful Intelligent Fire/Agent Release Control Units that are UL/ULC listed for fire alarm services, including releasing service. The FX-3500 Series provides up to three intelligent Data Communication Links (DCLs) / Signaling Line Circuits (SLCs) that support a new AP protocol, which is faster and has capacity for up to 954 intelligent devices. In addition, the FX-3500 Series has backward compatibility support for CLIP devices. The FX-3500 Series systems are recommended for both new and retrofit fire detection and/or special-hazard/critical-infrastructure suppression/special agent applications. Capable of releasing up to six discrete physical hazard zones, the FX-3500 offers exceptional value for complex installations. Programming versatility makes the FX-3500 Series the ideal choice for dependable fire detection, signaling and protection in industrial, commercial and institutional buildings. Safer • Sm • New fast AP protocol, extending number of devices on the loops, up to 954 (318 X3) • Panel supports both AP and CLIP protocol • Uses USB security key Shown with 2 optional RAX-1048TZDS modules • Utilizes the universal box • Six dedicated hazard zones • Utilizing cross-zoning or counting detection • Has a 4X20 line display APPROVED NYC Fire Dept. • Flush or Surface mountable with no additional hardware required Mircom.com FX-3500 Solution NETWORK (WIRED COMMUNICATION) DIAGRAM Advanced Protocol (AP) Intelligent Devices Mircom’s Advanced Protocol (AP) devices use a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. Mircom’s Advanced Protocol uses a superior group polling method as well as an interrupt feature that provide for a faster response to an alarm condition. In addition, Advanced Protocol allows for greater system capacity with support for up to 318 devices per SLC circuit. The AP devices are backwards compatible to operate in CLIP mode for legacy system applications. For more information call 1.888.660.4655 or visit Mircom.com Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Secutron™ name and graphic design are the exclusive property of Mircom Technologies Ltd. MIR-FX3500-SS_130065 v6 02/16 Remote Annunciators Intelligent Addressable Devices Conventional Devices Voice Evacuation Safer • Smarter • More Livable Buildings Intelligent Fire Alarm & Audio Network Solution FleX-NetName Series Model The Most Versatile and Powerful Systems in the Industry. Mircom’s FleX-Net Series is a powerful intelligent networkable fire alarm solution designed for medium to large-scale facilities. FleX-Net offers system designers many levels of flexibility to specify the ideal application of detection, control, notification and emergency communications. Feature such as fire detection & alarm, audio/voice evacuation, BACnet, Boolean logic, networking and graphical work stations allow this modular solution to accommodate the simplest systems up to the most complex solutions With the addition of the Advance Protocol (AP), Fire/CO detection and 520 Hz support on both the addressable loop and through the audio/voice evacuation, Mircom’s FleX-Net is poised to take you even farther into the future with expanded capabilities. • Advanced Protocol (AP) • Fire/CO support • 520Hz support • Audio/Voice Evacuation • Boolean Logic • Open Graphic Navigator • HVAC Fan and Damper Control • Building Management Systems (BMS) NYC Fire Dept. • Multiple System Configurations Supported • 63 Nodes per System • Copper & Fiber Optic Multi-Mode Networking APPROVED Mircom.com The FleX-Net Solution MASS NOTIFICATION COMMUNICATION FLOW Advanced Protocol (AP) Intelligent Devices Mircom’s Advanced Protocol (AP) devices use a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. Mircom’s Advanced Protocol uses a superior group polling method as well as an interrupt feature that provide for a faster response to an alarm condition. In addition, Advanced Protocol allows for greater system capacity with support for up to 318 devices per SLC circuit. The AP devices are backwards compatible to operate in CLIP mode for legacy system applications. For more information call 1.888.660.4655 or visit Mircom.com Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Mircom™, Flex-Net™ name and graphic design are the exclusive property of Mircom Technologies Ltd. MIR-FleXNet-SS_150050 Rev 2 Safer • Smarter • More Livable Buildings Emergency Communication System Model Name QX-mini Compact Package. Complex Features. All the features of a Premium Audio System: • SLC Control • Up to 60 Watts of audio output • Supports up to 6 panels • Digital Messaging • Expandable to 24 speaker outputs The best solution for Small to Mid-Sized applications. • Easy to install & configure • 3 0 Watt amplifier that can be expanded to 60 Watts (optional amplifier module) • Notifications can be sent using: 1) Stored digital recordings 2) Master microphone 3) Remote microphone • Comes with standard pre-recorded messages • C an store up to 12 minutes of digital recordings Mircom.com The QX-mini Solution 2 X 30W Speaker Circuits 2 X 2.5A Strobe Circuits 2 X 30W Speaker Circuits 2 X 2.5A Strobe Circuits Strobe Sync (Optional) Fire Alarm Control Panel QX-MINI Master Panel QX-MINI-RM Remote Microphone 2 X 2.5A Strobe Circuits RS-485 RS-485 SLC or Relays 2 X 30W Speaker Circuits Strobe Sync (Optional) QX-MINI-BP Booster Panel QX-MINI-BP Booster Panel QX-MINI-LOC Example audio system with a FACP, a QX-MINI Master Panel, two Booster Panels, and two Remote Microphones. Features: • Supports up to 60 Watts of audio output • Integrates with compatible intelligent fire alarm control units or with any UL-listed fire alarm control unit through relay contacts • Audio system supports up to 6 panels in total (one Master Panel with 5 Booster Panels) for a total of 360 Watts • Equipped with standard digital messages • Supports up to 6 remote microphones and/or Local Operating Consoles (LOC) • Select from 14 digital messages at the control panel • Custom messages using the software configurator • Two output circuits (2.5A each) for horns and strobes. Expandable up to 12 circuits • UL, ULC and CSFM approved Now A va Order ilable Today ! For more information call 1.888.660.4655 or visit Mircom.com Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Secutron™ name and graphic design are the exclusive property of Mircom Technologies Ltd. MIR-QXMINI-SS_150042 Notification Appliances LISTED Buildings Existing HOUSE PANEL Power Supplies & Accessories Graphics Software Systems THE MOST POWERFUL 3D GRAPHICS TOOL FOR ANNUNCIATION, MONITORING AND CONTROL mircom.com/opengn Open Graphic Navigator is a centralized building management system that provides real-time local or remote monitoring. As a powerful integration tool, Open Graphic Navigator is easily customized to communicate a range of system events to different responding authorities or personnel, including fire, security, maintenance and service staff. EMERGENCY EVENTS & NOTIFICATIONS Open Graphic Navigator provides real-time graphical notifications for fire and life safety systems. You see where the problem is, allowing you to respond quickly. Open Graphic Navigator means you’re connected 24/7. ENHANCED LIFE AND PROPERTY PROTECTION – CONTACT US TO FIND OUT MORE! POWERFUL Designed for the most demanding building standards in the world: • • • • • Airports University Campuses Hospitals Government Buildings Commercial & Residential Towers POWERFUL • FLEXIBLE • SIMPLE ENTERPRISE READY 2D AND 3D VISUALIZATION Open Graphic Navigator is the only graphics solution that provides both 2D and 3D troubleshooting. It is the perfect solution for large campuses or vertical properties where being able to guide emergency personnel to precise locations is crucial. Open Graphic Navigator has already been proven in complex business environments: TOGUS - US Department of Veterans Affairs -Augusta, ME University of Sharjah - Dubai, UAE Canadian Nuclear Laboratories - Chalk River, ON CA UNIFYING SIMPLE Pulls together building systems into one powerful visualization: Helps you quickly react to all events and emergency notifications: • • • • • • • • • • Fire Access Control Communications Video Surveillance Elevator Control Choice of 2D & 3D visualizations Clean, easy-to-read System Status Lists all notifications via Event Log Custom event response message Configurable monitoring screens NETWORK DIAGRAM Mircom makes buildings safer smarter and more livable. We provide a wide array of industry leading building systems that are all managed through one Unified Platform. Only Mircom has the potential to provide a single Unified Solution for your building. About the Mircom™ Group of Companies Safer • Smarter • More Livable Buildings CORPORATE/CANADA 25 Interchange Way Vaughan, ON L4K 5W3 Tel: 888.660.4655 Fax: 888.660.4113 USA 4575 Witmer Industrial Estates Niagara Falls, NY 14305 Tel: 888.660.4655 Fax: 888.660.4113 INTERNATIONAL 25 Interchange Way Vaughan, ON L4K 5W3 Tel: 905.660.4655 Fax: 905.660.4113 Founded in 1991, Mircom is a global designer, manufacturer and distributor of Intelligent Building Solutions. Reaching customers in over 100 countries worldwide, Mircom’s portfolio includes: fire detection & alarm, communications & security, mass notification, nurse call, and building automation & smart technologies. Mircom’s vision is to make buildings worldwide safer, smarter, and more livable. Our global network of dedicated Sales and Service Offices, known as Mircom Engineered Systems, allows us to be a full solution provider. Through Mircom ES, we’re able to provide and fully service our line-up of innovative and advanced solutions which are scalable to satisfy diverse user demands, from small & mid-size buildings to the world’s most complex applications. Corporate head office and manufacturing facility, Vaughan (Toronto), ON, Canada mircom.com Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Mircom™ , & MGC™ name and graphic design are the exclusive property of Mircom Technologies Ltd. MGC-OGN-160010 08/16 Mass Notification Mass Notification & Emergency Communication Powered by TCPDF (www.tcpdf.org) Powered by TCPDF (www.tcpdf.org)