50 Years - Our Products

Transcription

Air Compressor Sales, Inc.
1-800-342-6016
www.aircompressorsales.com
50
Years
Serving Our Customers Since 1965
Rotary Screw Compressors Page 58
We now offer Gardner Denver
Industrial Blowers Page 56
Portables Page 62
Fall and Winter 2015
Dryers Page 12
Catalog #328
COMPRESSOR PUMPS
X1107
EC7 MSV40MAX
SCHULZ
>
>
• Delivers: 25.5 CFM at 175 PSI (7.5 HP)
• Cast-Iron Construction
• 995 RPM
• Suitable for 215T and 213T Frame Motors
U1256
EC5
U1290
UHT75
• Delivers: 17 CFM at 175 PSI (5 HP)
• Slow Speed (700 RPM)
• Finned Copper Intercooler
• Suitable for 184T Frame Motor
>
The EC5 (Above) and The
EC10 (Below) are suitable
replacements for many NAPA
, Industrial Air and Saylor
Beall 705 & 707 Pumps.
>
• Inserted Rods
• Centrifugal Unloading
• Head Unloading on UT50U model
U1261
UH30
• Delivers: 13.8 CFM at 100 PSI (3 HP)
• Suitable for 182 Frame Motors
Pricing on
Page 1 >
SCHULZ
Pumps are not painted to a
finished quality
>
Actual colors may Vary.
U1258
EC10
• Inserted Rods
• Head Unloading on UT100U model
X1115
EC15 MSW60MAX
>
• 1065 RPM
COMPRESSOR PUMPS
Emglo / Jenny
1
UNOAIR
UNOAIR
X1104 KU
• Also for 5.5 HP Engine Driven Units
• Includes Head Unloaders
U1264
UB20
• Suitable for 56 and 145 Frame Motors
SCHULZ
CAMPBELL
HAUSFELD
U1286 UH30D
• Delivers: 8 CFM at 100 PSI (2-5 HP)
• Suitable for 56 and 145 Frame Motors
X1116 SZ-MSL10
• Delivers: 5.9 CFM at 100 PSI (2-5 HP)
X1108 VT2030
• Delivers: 6.4 CFM at 90 PSI (2-5 HP)
Part #
MODEL #
HP
STAGE
IC
CYL
AIR DELIVERY
WEIGHT
COST
X1104
KU
1-2
1
N/A
2
20 lbs.
387.11
X1116
SZ-MSL10
2-5
1
N/A
2
5.9 CFM @ 100 PSI
35 lbs.
205.25
X1108
VT
2-5
1
N/A
2
7 CFM @ 90 PSI
36 lbs.
267.96
U1264
UB20
2
1
N/A
2
8.0 CFM @ 100 PSI
44 lbs.
165.79
U1261
UH30
3
1
N/A
2
13.8 CFM @ 100 PSI
53 lbs.
168.41
U1286
UH30D
2-5
1
N/A
2
8 CFM @ 100 PSI
53 lbs.
175.15
U1290
UHT75
5
2
Finned Copper
2
17 CFM @ 175 PSI
270 lbs.
495.69
U1256
EC-5
5
2
Cast-Iron
2
17 CFM @ 175 PSI
240lbs.
439.74
U1257
EC-5U**
5
2
Cast-Iron
2
17 CFM @ 175 PSI
245 lbs.
458.76
8 CFM @ 100 PSI 0 lbs
X1107
EC-7
7.5
2
Finned Copper
2
25.5 CFM @ 175 PSI
210 lbs.
877.61
U1258
EC-10
10
2
Cast-Iron
4
34 CFM @ 175 PSI
335 lbs.
679.42
U1259
EC-10U**
10
2
Cast-Iron
4
34 CFM @ 175 PSI
340 lbs.
728.01
X1115
EC-15
15
2
Finned Copper
3
47 CFM @ 175 PSI
325 lbs.
1,480.67
*Flywheel and intake filter(s) included on all pumps.
**Models that end with a "U" denote head unloaders for dual control and engine driven applications.
Pumps are not painted
to a finished quality.
[email protected]
Actual packed shipping weights may vary.
Local: 1-478-474-8460
2
Kellogg Replacements
X1032 R335HU
X1034 R452HU
• Steel Rods with Automotive Type
Inserts and Needle Bearings at
Wrist Pins
• Positive Ring Fed Lubrication
• Head Unloading
Wrist Pins
• Head Unloading
X1031 Z332
• Delivers: 17.2 CFM at 175 PSI ( 5 HP )
• Delivers: 25 CFM at 175 PSI ( 7.5 HP )
• Long Stroke Design
• Automotive Type Inserts
and Needle Bearings at Wrist Pins
• Optional Head Unloading
X1035 R462HU
• Steel Rods with Inserts
• Head Unloading
X1033 R352HU
• Steel Rods with Inserts
• Head Unloading
Part #
MODEL
HP
STAGE
CYL
WEIGHT
COST
X1030
R321
1-2
2
2
121
572.02
X1031
Z332
3, 5 & 7.5
2
2
240
953.92
X1032
R335HU*
3-5
2
2
220
667.36
X1033
R352HU*
10
2
2
480
1,735.45
X1030 R-321
X1034
R452HU*
7.5 - 10
2
4
310
1,079.79
X1035
R462HU*
15 - 25
2
4
793
2,861.94
Wrist Pins
*HU models indicate head unloading feature for constant run (dual control) or engine
applications. If HU is not required, do not connect during installation. No modification
required.
HU = TVX designation.
Call: 1-800-342-6016
Fax: 1-478-471-1095
3
COMPRESSOR PUMPS
Fusheng & Curtis Replacement Pumps
U1670 RF15T
U1610 RF20S
U1650 RF50T
Part #
MODEL #
Replaces
Fusheng
Replaces
Curtis
HP
STAGE
CYL
AIR DELIVERY
RPM
WEIGHT
COST
U1600
RF10S
VA-65
ES-10
1
1
2
3 CFM @ 115 PSI
510
45 lbs.
170.96
U1610
RF20S
TA-65
ES-20
2
1
3
6.7 CFM @ 115 PSI
680
64 lbs.
239.09
U1620
RF23T
HTA-65
E-23
2
2
3
6.0 CFM @ 175 PSI
780
60 lbs.
247.23
U1630
RF30S
VA-80
ES-30
3
1
2
347.83
RF50S
TA-80
ES-50
5
1
3
800
880
110 lbs.
U1640
10.6 CFM @ 115 PSI
18.4 CFM @ 115 PSI
155 lbs.
438.26
U1650
RF50T
HTA-80
E-50
5
2
3
15.9 CFM @ 175 PSI
950
148 lbs.
457.10
U1660
RF71T
HTA-100
E-71
10
2
3
28.3 CFM @ 175 PSI
990
227 lbs.
762.36
U1670
RF15T
HTA-120
E-15
15
2
3
44 CFM @ 175 PSI
900
411 lbs.
964.88
Mounting Spacers
Spacers lift pump base 1".
We highly recommend replacing check valve, belts and replacing or thoroughly
cleaning exhaust tube (from pump to tank) when replacing pump.
"Set of four"
Always use our #3 "Compressor Oil".
R3088 COST
(Automotive type oils lack adequate heat range and may damage pump.)
$18.75 per set.
X1011 LCOB / K17
• Cast-Iron Cylinder
• Inserted Connecting Rods
• 9.0 CFM @ 100 PSI
• Suitable for 145
Frame Motor
X1009 LCOC / K24
• Cast-Iron Cylinder
• Inserted Connecting Rods
• 13.5 CFM @ 175 PSI
• Suitable for 145 Frame Motor
Part #
MODEL
HP
STAGE
CYL
WEIGHT
COST
X1011
LCOB
1-3
1
2
35 lbs.
334.40
X1009
LCOC
2-5
2
2
45 lbs.
472.43
See our full line of Compressor Lubricants on page 53.
[email protected]
Local: 1-478-474-8460
4
COMPRESSOR PUMPS
Aerospace - Chemical Processing Climate Control - Dental - Food Processing Instrumentation - Laboratories - Pharmaceutical
Industrial Use - Oilless Pumps
Powerex utilizes cutting-edge compressor technology
to provide the most advanced oilless reciprocating air
compressor in the industry. Available in single and two
stage versions.
Continously lubricated, sealed bearings provide oil-free
compressed air and extended compressor life.
Onboard fan, finned flywheel and temperature reducing
composite piston create lower operating temperatures.
The inlet filter on the compressor assures a capture rate
of 99% of incoming air particulate , down to 10 micron.
Needle bearings at the wrist pins are double lip sealed
and grease lubricated.
Part #
MODEL
HP
RPM
SCFM
STAGE
CYL
WEIGHT
COST
P4000
OPS010
1.5 / 1
885/620
5.3/3.6
1
1
34
1,215.72
P4005
OPS030
3/2
1115/845
10.1/6.5
1
2
65
2,219.58
P4010
OPT050
5
860
17.9
2
2
95
4,407.48
P4015
OPT100
10 / 7.5
1090/855
35/26.1
2
3
134
5,347.32
P4020
OPT150
15
1140
47
2
3
137
6,304.98
P4025
SLA03E
3
3140
8.8
Scroll
39
2,919.84
P4030
SLA05E
5
3250
15.2
Scroll
52
3,810.18
Scroll Type Pump
* RPM and SCFM ratings are @ 100 PSIG
Composite Piston Technology
Two Stage Compression (7.5 HP through 15 HP)
Meets NFPA 99 Applications
Air Cooled Intercooler
Sealed Bearings
Grease Filled Wrist Pin
Head Unloaders
Tank Mounted packages are
Built-in Cooling Fan
available.
Corrosion Resistant
Powerex Units can be
custom ordered to meet
3 Year Warranty
your system requirements

Call: 1-800-342-6016
Fax: 1-478-471-1095
5
COMPRESSOR PUMPS
- Economy -
*Kellogg Replacements
GRAY LINE SERIES
X1210
X1200
GL462HU
GL335HU
Wrist Pins
• Head Unloading
Inserts
• Head Unloading
X1205
GL452HU
Wrist Pins
• Head Unloading
*Saylor Beall 705 & 707 Replacements
X1220
GL10

• Delivers: 34 CFM at 175 PSI
(10 HP)
• Inserted Rods
*GL-5, GL-10 Replaces Saylor Beall 705 & 707 style pumps and similar NAPA or Industrial Air Pumps.

X1215
GL-5
• Delivers: 17 CFM at 175 PSI
(5 HP)
• Inserted Rods
[email protected]
Part #
X1200
X1205
X1210
X1215
X1220
MODEL
GL335HU
GL452HU
GL462HU
GL5
GL10
HP
5
10
15-25
5
10
STAGE
2
2
2
2
2
CYL
2
4
4
2
4
WEIGHT
220
310
793
240
335
*Actual Pump Colors may vary.
Local: 1-478-474-8460
COST
518.44
918.80
2,439.99
375.59
561.18
6
AIR TREATMENT ACCESSORIES
AIR FILTERS- Watts
Removes water condensate,
and particulates from air flow.
40 Micron Filter
Zinc Bowl 250 PSI Max.
Part#
WATTS #
SIZE
BOWL
CFM
COST
S1450
F602-024A
1/4"
zinc 4.4 oz.
53
60.66
S1451
F602-034A
3/8"
zinc 4.4 oz.
80
60.66
S1452
F602-044A
1/2"
zinc 4.4 oz.
85
60.66
S1111
F602-06WJ
3/4"
zinc 16 oz.
220
148.01
S1130
F602-08WJ
1"
zinc 16 oz.
240
148.17
S1110
F602-10WJ
1 1/4"
zinc 16 oz.
390
178.26
S1116
F602-12WJ
1 1/2"
zinc 16 oz.
450
178.26
S1102
F602-16WJ
2"
zinc 16 oz.
1200
569.57
S1133
F602-20WJ
2 1/2"
zinc 16 oz.
1200
569.57
(For Watts Filters)
Part # : S1083
COST: 34.15
COALESCING FILTERS - Watts
Part #
WATTS #
SIZE
BOWL
CFM
COST
S1453
F701-024E
1/4"
zinc 4.4 oz.
45
110.50
S1454
F701-034E
3/8"
zinc 4.4 oz.
48
110.50
S1455
F701-044E
1/2"
zinc 4.4 oz.
65
110.50
S1119
F701-06E3P
3/4"
alum 32 oz.
158
287.63
S1103
F701-08E3P
1"
alum 32 oz.
158
287.63
S1039
F701-10E3G
1 1/4"
steel 100 oz.
220
638.20
S1089
F701-12E3G
1 1/2"
steel 205 oz.
250
638.20
S1053
F701-16E3G
2"
steel 205 oz.
395
1,105.17
S1600
F701-20E3G
2 1/2"
steel 380 oz.
550
1,181.18 250 PSI Max.
High-efficiency filters use Direct
Interception, Inertial Impaction and
Diffusion to capture particles smaller
than the nominal size of the flow
passing through the element.
Removal rating: .3 micron
REPLACEMENT ELEMENTS - Watts
Part #
S1821
S1800
S1801
S1802
S1803
S1811
S1810
S1809
S1811
S1822
S1804
S1805
S1806
S1807
S1808
S1812
WATTS #
PS701
EK602Y
EK602A
EK602B
EK602G
EKF20A
EK504Y
EKF10Y
EKF20A
PS724
F701-C3-0771
F701-C3-0773
F701-C3-0775
F701-C3-0777
F701-C3-0778
EKF601J
TYPE
Filter
Filter
Filter
Filter
Filter
Filter
Mini-Filter
Filter/Reg
Filter/Reg
Coalescor
Coalescor
Coalescor
Coalescor
Coalescor
Coalescor
Coalescor
FITS
1/4" to 1/2"
1/4" to 3/8"
1/2"
3/4" to 1-1/2"
2" to 2-1/2"
QIX only
1/4"
1/2" (B11-04)
QIX only
1/4" to 1/2"
2012 and Before
3/4" to 1"
1-1/4" to 1-1/2"
2"
2-1/2"
QIX only
Year
2013 and Forward
2012 and Before
2012 and Before
All Years
All Years
All Years
All Years
All Years
All Years
2013 and Forward
All Years
All Years
All Years
All Years
All Years
All Years
COST
14.85
12.99
20.19
34.32
40.90
20.35
8.53
10.80
20.35
34.59
39.14
74.41
109.62
162.86
202.18
50.65
Part #
S1820
S1083
S1083
Auto Drain
PS506
SA605MD
SA605MD
TYPE
Float
Float
Float
FITS
1/4" to 1/2"
3/4" & up
3/4" & up
Year
2013 and Forward
All Years**
All Years**
COST
36.74
38.01
38.01
C
Call: 1-800-342-6016
S
Fax: 1-478-471-1095
Internal
Auto
Drain
7
REGULATORS - Watts
Part #
WATTS #
CFM
SIZE
COST
S1113
R119-02C
100
1/4"
59.96
S1109
R119-03C
110
3/8"
59.96
S1095
R119-04C
150
1/2"
71.40
S1121
R119-06C
300
3/4"
117.68
S1108
R119-08C
400
1"
117.68
S1123
R119-10C
500
1 1/4"
148.32
S1127
R119-12C
500
1 1/2"
148.32
S1131
R119-16J
1800
2"
526.60
S1101
R119-20J
1800
2 1/2"
526.60
An Air Regulator is a specialized control
valve. It reduces the upstream supply
pressure level to a specified constant
downstream pressure. Precise air pressure
control is essential to efficient operation of
air-powered equipment.
300 PSI max. Incoming pressure
0-125 PSI Regulated pressure
1/4"gauge required
See page 36 for S1066 gauge.
*Note: 2" and 2 1/2" Regulators are pilot operated, you must have a
1/4" regulator to work in conjunction with it.
S1120
B11-04-WJC
80
1/2"
105.35
Combination Filter / Regulator in
one piece unit S1120
LUBRICATORS - Watts
Part #
WATTS #
SIZE
BOWL
CFM
COST
S1456
S1457
S1458
S1118
S1128
S1125
S1129
L606-024B
L606-034B
L606-044B
L606-06W
L606-08W
L606-10W
L606-12W
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
zinc 2.6 oz.
zinc 2.6 oz.
zinc 2.6 oz.
zinc 16 oz.
zinc 16 oz.
zinc 16 oz.
zinc 16 oz.
40
60
90
325
325
350
400
72.50
72.50
72.50
153.14
153.14
182.36
182.36
Drip Leg Drain
Polycarbonate Bowl 150 PSI Max.
Zinc Bowl 250 PSI Max.
See Page 73 for pricing
1/4"gauge required.
See page 36 for S1066 gauge.
Mini Series - Watts
1/8" gauge required.
See page 36 fior S1088 gauge.
Mini Series 1/4" NPT
Polycarbonate Bowls 150 PSI Max
[email protected]
1/4"
Part #
TYPE
WATTS #
CFM / Bowl
COST
S6101
Filter / Regulator
B548-02AHC
12 cfm - 1 oz.
44.54
S6102
Filter
F504-02AH
22 cfm - 1 oz.
26.86
S6103
Lubricator
L508-02AM2
20 cfm - 1 oz.
39.73
S6104
Regulator
R374-02CX21
10 cfm
25.12
Local: 1-478-474-8460
8
TOILET PAPER FILTERS - Motorguard
Motorguard Toilet Paper Filters effectively remove oil aerosols, condensed moisture and
sub-micronic particles from compressed air and vacuum lines. Designed for use with 1/4"
or 1/2" NPT pipe connections for pneumatic tools, instruments, controls, and plasma cutting
system applications. Economical one step method for hobby type applications.
Part #
S1135
S1136
S1160
M30 model <<<
Size: 1/4" FPT
Max Pressure: 125 PSI
Removal Rating: .01 micron
MODEL
MOUNTING KIT
M30
included
M60
N/A
Replacement Filters - 4 Pack
M60 model >>>
Size: 1/2" FPT
Max Pressure: 125 PSI
Removal Rating: .01 micron
Example fittings.
AG Series Filter
Particle and Oil Aerosol Removal
FF 1st stage, SMF 2nd stage. 99.999% Retention down to 0.01 um
Part #
S7400
S7401
S7425
S7426
MODEL
FF 1/2
FF 3/4
SMF 1/2
SMF 3/4
CFM
60
100
60
100
ELEMENT
FF0410PC
FF0520PC
SMF0410PC
SMF0520PC
Call: 1-800-342-6016
SIZE
1/2"
3/4"
1/2"
3/4"
FTG
NPT (Female)
NPT (Female)
NPT (Female)
NPT (Female)
COST
162.68
267.62
174.34
284.15
Fax: 1-478-471-1095
COST
81.86
81.86
34.69
9
WATTS QIX
MODULE SYSTEM
Air Filter
Module
Coalescing
Filter Module
Lubricator
Module
• 40 micron filter • 40 CFM capacity
3 Module FRC or FRL
• 0.3 micron Coalescing Oil Removal Filter • 20 CFM capacity
• Regulator adjustable from 0 to 125 PSI • 40 CFM capacity
(Regulator Module shown in the middle.)
(Gauge Sold Separately - Use S1066 on page 36 )
Part #
Model
MODULE
COST
S6000
S6001
S6002
S6003
F20-00WJ
F21-00WJ
R21-00C
L20-00WH
Filter
Coalescor
Regulator
Lubricator
102.42
152.79
85.73
110.44
Customize Your Combinations
Order 1 Mounting Kit for 1 module, 2 Mounting Kits
for 2-3 modules, or 3 Mounting Kits for 4 modules
Order 1 Combination Kit between modules
Order 1 End Kit per total system set up for threaded pipe
connections
FRC 3 Module Combination
Part #
Filter, Regulator & Coalescor - Kit
Part #
SIZE
COST
S6016
S6017
S6018
S6019
S6020
1/4"
3/8"
1/2"
3/4"
1"
390.64
390.64
390.64
390.64
390.64
FRL 3 Module Combination
Filter, Regulator & Lubricator - Kit
Brackets, Ends and Couplers Included.
Simple assembly required.
Part #
SIZE
COST
S6021
S6022
S6023
S6024
S6025
1/4"
3/8"
1/2"
3/4"
1"
348.29
348.29
348.29
348.29
348.29
[email protected]
Watts
QIX
Module
System
S6005
S6006
S6007
S6008
S6009
S6010
S6011
S6012
S6013
S6015
S1083
S1811
S1812
ACCESSORY
MK20-0100
Wall Mounting Kit
IK20Y-02
1/4" End Kit - Pair
IK20X-03
3/8" End Kit - Pair
IK20A-04
1/2" End Kit - Pair
IK20B-06
3/4" End Kit - Pair
IK20C-08
1" End Kit - Pair
IK20CC
Combination Kit
IK20V
Shut-Off Valve Module
IK20CP
Port Block Module
PST20
Pressure Sensor Module
SA605MD
Internal Auto Drain
EKF20A
Element For F20 & B20
EKF601J
Element only For F21
COST
10.21
11.30
11.30
11.30
11.30
11.30
8.99
52.73
8.99
67.38
38.01
20.35
50.65
Popular Integral Combinations
IFRC IFRL
Simple assembly required.
IFR
Brackets, Ends and Couplers Included.
Model
Integral Filter Regulator with Lubricator (Mechanics tools)
Order: S6004, S6003, S6011, 2 x S6005 AND 1 END KIT BY PIPE SIZE
Integral Filter Regulator with Coalescor (Oil removal - painting applications)
Order: S6004, S6001, S6011, 2 x S6005 AND 1 END KIT BY PIPE SIZE
Integral Filter Regulator (Basic Air Use)
Order: S6004, S6005 AND 1 END KIT BY PIPE SIZE
Local: 1-478-474-8460
10
Air Treatment Accessories
DF SERIES Filter System
DF Series Features & Benefits
• Reduced pressure drop by 50% uses less energy.
• Filter element can be removed together with filter bowl,
reducing overall installation height requirements.
• Changing the code clip inside the filter bowl changes the
flow direction through the element so that the filter can be
used either as a coalescing filter (inside to outside flow) or
a particulate filter (outside to inside flow).
• The integrated differential pressure indicator can be easily
rotated in the filter head.
• The bayonet lock ensures that the filter cannot be opened
MKV and MKS models are
combination particulate and
coalescing filters.
May be used as a single
stage MKV filter or as a two
stage system by adding
the MKS filter for enhanced
filtration performance.
under pressure for increased safety.
• Filter housings are immersion-coated ensuring long-term
Initial
Element
Included
protection against corrosion.
Part #
S7600
S7605
S7610
S7620
S7630
S7650
S7655
S7660
S7670
S7680
MODEL
DF0120MKV
DF0210MKV
DF0320MKV
DF0600MKV
DF1100MKV
DF0120MKS
DF0210MKS
DF0320MKS
DF0600MKS
DF1100MKS
CFM
70
123
188
353
647
70
123
188
353
647
ELEMENT
1C486023
1C486033
1C486043
1C486063
1C486083
1C486020
1C486030
1C486040
1C486060
1C486080
SIZE NPT
1/2"
3/4"
1"
1-1/2"
2"
1/2"
3/4"
1"
1-1/2"
2"
COST
234.94
324.65
356.68
569.54
1,030.18
251.30
350.27
383.03
602.29
1,080.00
Shown with
All Filter Housings shown above, are rated at 250 PSI @ 150 degree F.
Float-Style
Replacement Float Drain 1C485523
Auto Drain
S7682
Part #
S7520
S7525
S7530
S7535
S7540
S7545
S7550
S7555
S7560
S7565
DF ELEMENTS
Fits Model
ELEMENT
DF0120MKV 1C486023
DF0210MKV 1C486033
DF0320MKV 1C486043
DF0600MKV 1C486063
DF1100MKV 1C486083
DF0120MKS 1C486020
DF0210MKS 1C486030
DF0320MKS 1C486040
DF0600MKS 1C486060
DF1100MKS 1C486080
COST
107.27
137.45
163.38
276.24
422.41
130.04
172.03
198.01
322.75
492.65
108.74
Applications:
• Chemical Industry
• Petrochemical Industry
• Pharmaceutical Industry
• Plastic Industry
• Food Industry
• Beverage Industry
• Control Air - Instrumentation
• Machine Fabrication Industry
Filter Element Data
V Coalescence Filter: Residual Oil Content 0.7 1 ppm1 and 90% on ISO fine dust particle retention.
S Coalescing Filter: Residual Oil Content <0.01 ppm1 and 99.99998% on 0.01 micron particle retention.
Filter Housing: Aluminum die cast
Econometer: Polymer
Float Drain: Polymer
Optimized
Airflow
Gaskets: Viton®
Call: 1-800-342-6016
Fax: 1-478-471-1095
11
Centrifugal Separator
Aircel Cyclone Separators are designed for efficient removal of liquid water and
particulate from compressed air and gases.
Aircel DF-C Cyclone Separators deliver high separation efficiency at low
pressure drop through an optimal flow-path design.
An insert in the cyclone head creates centrifugal action that forces liquid and
particulate to the housing wall. Friction with the housing causes the particulate
and liquid to lose part of their kinetic energy and drop out of the airstream.
Collected condensate is removed by a timer controlled UFZ condensate drain.
DF-C Series Features
• Flow-optimized design.
• Innovative spin insert.
• Bayonet lock ensures housing cannot be
opened under pressure.
• Immersion-laquered housing on inside and
out side surfaces.
• Wall-bracket and UFM-T electronic
level-controlled condensate drain options.
• Reduced power and energy consumption.
DF-C Series Benefits
• Low pressure drop resulting in energy savings.
• High efficiency over a broad flow range.
• Highly efficient moisture separation.
Filter Housing: Aluminum Die Cast
• Long-term corrosion protection.
115V Timer: 1/2" NPT Drain, Brass
• Flexibility to meet installation and application
requirements.
Sealings: Viton*/NBR
Particulate Retention≥ 5 micron 99%
Maximum Operating Pressure 232 psi
Continuous Operating Temperature 34°F to 149°F
Part #
S7700
S7705
S7710
S7715
S7720
Optimized
Airflow
[email protected]
MODEL
1C484247-63
1C484367-63
1C484487-63
1C484607-63
1C484967-63
Tank Drains
on page 71
CFM
70
123
188
264
647
Weight lbs. SIZE NPT
3.5
1/2"
5.9
3/4"
5.9
1"
6.4
1-1/2"
6.4
2"
COST
226.39
288.34
321.07
343.87
527.54
Cast Iron Separators >
See page 47
Local: 1-478-474-8460
12
Refrigerated Dryer
HIGH TEMP Dryer
Features
• Incorporates Donaldson's decades of dryer expertise
• Inlet temperatures up to 250°F
• Inlet pressures up to 200 psig
• Operates in ambient temperatures up to 120°F
• Outlet pressure dew point from 38°F to 50°F
• Fully automatic operation
• Environmentally safe R134a refrigerant
• All-in-one design saves time, space and money Quicker installation
• Reduced floor space Eliminates need for compressor aftercooler
The Donaldson DHT high inlet temperature compressed air dryer has been designed specifically for use
with air compressors that do not already have an aftercooler. (Aftercooler examples, see pages 16 & 17)
Hot compressed air, up to 250°F, enters the integral air-cooled aftercooler where it is pre-cooled before entering
the drying circuit.
Additional pre-cooling occurs as the compressed air passes through the first stage of the highly efficient heat
exchanger.
The precooled air is then cooled down to its final dew point in the evaporator and its high efficiency, multi-stage
separator.
Water vapor in the compressed air condenses into liquid droplets as the air cools.
Liquid water condensate is collected and drained at the lowest and coolest point within the drying circuit.
The cold compressed air is reheated in the final stage of the heat exchanger as it flows countercurrent to the
incoming hot compressed air.
Best Choice for Piston Type Air Compressors
Automotive Repair Shops
Dryer Stand Available
Body Shops
Call for pricing.
Many Industry Applications
• 1 Year Standard Limited Warranty
• Additional 3-year Warranty, (prorated, parts only) for compressor & heat exchanger with purchase of optional "MKV" prefilter.
Extended warranty coverage requires a minimum of one replacement element per year. See Page 10
Part #
MODEL
CFM
NPT
For HP
VOLT
AMPS
WEIGHT
HxWxD
COST
F6301
DHT-20
20
0.5"
1-5
115/1
7.1
85 lbs.
15 x 16 x 16
1,377.56
F6302
DHT-40
40
1"
7.5-10
115/1
12.4
125 lbs.
22 x 24 x 18
1,865.54
F6303
DHT-50
50
1"
15
115/1
12.4
140 lbs.
22 x 24 x 18
2,109.54
F6304
DHT-75
75
1"
20
115/1
12.4
140 lbs.
22 x 24 x 18
2,678.40
F6305
DHT-100
100
1-1/2"
25
115/1
17.7
330 lbs.
30 x 36 x 25
3,166.39
F6306
DHT-125
125
1-1/2"
25-30
115/1
17.7
350 lbs.
30 x 36 x 25
3,735.24
Above ratings are based upon 100 PSI inlet pressure @ 100 ° ambient. Ratings are increased by 20% if used at 170 PSI.
Add 50 lbs. for ship weight. All units must ship via freight carrier only.
Call: 1-800-342-6016
Fax: 1-478-471-1095
Refrigerated Dryer
13
Refrigerated Dryer
Best Choice for Rotary Screw Compressors
and Units that have existing aftercoolers.
Features:
• Precooling and reheating of compressed air for high efficiency and low energy consumption.
• Patented Variable Flow high-efficiency heat exchanger.
• Surface Tension to achieve consistent dew point at varying flow conditions.
• Evaporator includes multi-stage separator with (cleanable) stainless steel demister.
• Environmentally friendly refrigerant R-134a.
• Refrigerant analyzer gauge.
• Heavy-duty industrial powder coated cabinet with access panel.
How it works:
Hot, saturated compressed air is first precooled by exiting cold
air in the air-to-air heat exchanger. The precooled air then
enters the evaporator where it is cooled to its final dew point.
The mixture of cold air and condensation flows into the threestage separator/demister where liquids and contaminants are
reliably removed and ejected from the system. The cold air is
then reheated by the incoming hot air before leaving the dryer.
38°F Dew Point.
Ambient Air 35°-120°F, Max Inlet Air 140°F.
200 PSIG maximum working pressure.
• 1 Year Standard Limited Warranty
• Additional 3-year Warranty, (prorated, parts only) for compressor & heat exchanger with purchase of optional "MKV" prefilter. See page 10
Extended warranty coverage requires a minimum of one replacement element per year.
Part #
MODEL
*CFM
NPT
Compressor
HP Range
F6500
F6510
F6520
F6530
F6540
F6550
F6560
F6570
F6580
F6590
F6600
F6610
F6620
F6630
F6640
ACS-10
ACS-15
ACS-25
ACS-40
ACS-50
ACS-60
ACS-75
ACS-100
ACS-125
ACS-150
ACS-200
ACS-250
ACS-300
ACS-400
ACS-500
10
15
25
40
50
60
75
100
125
150
200
250
300
400
500
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
1"
1"
1"
1"
1-1/2"
1-1/2"
2"
2"
2"
3
5
7.5
10
15
15-20
20
25-30
30
40
50
50-60
60-75
75-100
100-125
VOLT /
PHASE
115/1
115/1
115/1
115/1
115/1
115/1
115/1
115/1
115/1
115/1
230/1
460/3
460/3
460/3
460/3
Amps
Dryer HP
WEIGHT
HxWxD
COST
6
6
6
7
7
11
11
16
21
21
12
5
6
9
12
1/4
1/4
1/4
1/4
1/4
1/3
1/3
1/2
3/4
3/4
1
1.25
1.5
2
3
71 lbs.
74 lbs.
76 lbs.
78 lbs.
80 lbs.
102 lbs.
124 lbs.
138 lbs.
156 lbs.
162 lbs.
240 lbs.
332 lbs.
345 lbs.
567 lbs.
582 lbs.
15x16x16
15x16x16
15x16x16
15x16x16
15x16x16
15x16x16
22x24x18
22x24x18
22x24x18
22x24x18
30x36x25
30x36x25
30x36x25
45x34x45
45x34x45
800.41
959.39
1,141.86
1,421.80
1,827.53
1,902.88
2,180.74
2,269.21
2,805.58
2,950.73
3,899.06
4,496.95
5,152.20
6,461.34
7,464.26
* CFM rating based upon CAGI ADF 100 @ 100psig, 100 ° F ambient , and PDP of 38 ° F.
*** All Models 60 Hz
F6250
411-0091-00 TRANSFORMER
Dryer Stand Available
**** Add Approx.50 lbs for crated weight.
460/1
404.09
Call for pricing.
*Optional Transformer may be used to convert voltage & phase for models ACS-10 to ACS-200.
Two legs of existing 460 volt three phase service are connected to Optional Transformer, creating a single phase 115 or 230 volt output.
Larger dryer sizes availble. Call for information.
[email protected]
Local: 1-478-474-8460
14
"DS" Oil-Water Separators
Part #
MODEL
* CFM
Moderate
Climate
* CFM
Tropical
Climate
WEIGHT
COST
S8300
S8305
S8310
S8315
S8320
DS0070
DS0145
DS0265
DS0530
DS1060
71
106
177
353
707
35
71
106
247
459
19
43
52
77
150
503.34
727.63
825.71
1,284.94
1,776.11
* Actual performance may be higher depending upon oil types and equipment.
Liquid Condensate contains water and
oil as a by product of compression.
Enviromental standards require that oil
be removed before water is discharged
to drain. Our DS Separators provide a
simple and cost effective solution.
CAREPAC Filter Maintenance Kits for DS Separators
Part #
S8350
S8355
S8360
S8365
S8370
MODEL
CP70
CP0145
CP0265
CP530
CP1060
Item
CAREPAC
CAREPAC
CAREPAC
CAREPAC
CAREPAC
COST
151.55
200.45
288.44
463.24
527.99
Condensate Oil Water Separators
S-Series1
Sepura STERLING
Oil Water Separators
Self Contained Design
Modular Media System
No Carbon Bags, No Oil Containers,
No Settling Tanks Required.
Part #
S8380
S8381
S8382
S8383
S8387
S8384
S8394
S8385
Model
SEP 60 ST
SEP 120 ST
SEP 360 ST
SEP 900 ST
SEP 1250 ST
SEP 1800 ST
SEP 2500 ST
SEP 3500 ST
CFM
60
120
360
900
1250
1800
2500
3500
HxWxD*
9x6x6
20x9x10
26x14x11
39x17x20
39x18x20
39x39x21
39x43x22
39x39x28
Call: 1-800-342-6016
Wt.lbs. Inlet NPT Outlet NPT
3
1/4"
3/8"
6
1/2"
3/4"
8
1/2"
3/4"
33
1/2"
3/4"
40
1/2"
3/4"
69
1/2"
3/4"
84
1/2"
3/4"
319
3/4"
3/4"
Cost
166.32
539.78
780.19
1205.84
1891.08
2608.58
3708.00
8454.24
Media Refill
na
S8388
S8389
S8390
S8395
S8391
S8396
S8392
Fax: 1-478-471-1095
Cost
na
251.86
331.26
494.56
748.44
961.63
1496.88
6373.08
15
DESICCANT DRYER
AHLD - E
Desiccant Dryer System
10 Year Exhaust Valve Warranty
Includes Mounted Filters
Other Sizes Available
From 4 CFM to 5000 CFM
Call for pricing and specs
Activated Alumina
Beads (Desiccant) are
used as the media in
the AHLD-E dryer.
Desiccant - Activated Alumina
Part #
BEAD SIZE
QTY
COST
B011
1/8 bead
50 lb. Bag
115.85
B012
3/16 bead
50 lb. Bag
115.85
AMD Dryers
Part #
S8250
S8252
S8254
S8256
S8258
S8260
S8262
S8264
S8266
S8268
S8270
MODEL
AHLD-70E
AHLD-100E
AHLD-150E
AHLD-200E
AHLD-250E
AHLD-300E
AHLD 350E
AHLD-350E
AHLD-450E
AHLD-500E
AHLD-600E
AHLD-750E
Part #
S8400
S8402
S8404
S8406
S8408
S8410
S8412
S8414
S8416
S8418
MODEL
AMD004
AMD006
AMD008
AMD010
AMD015
AMD025
AMD035
AMD045
AMD055
AMD065
• Rated at minus 40°F
Dew Point
• Pre-Filter Included
• After-Filter Included
• Twin Vessel System
• 115 Volt controls
• Conforms to CAGI
• 3/16" Desiccant
• ASME Coded
• Butterfly Valves
• Electronic Controller
CFM
SIZE NPT
3/4"
70
1"
100
1"
150
200
1-1/2"
250
1-1/2"
300
1-1/2"
350
2"
450
2"
500
2"
600
2"
750
2"
AMD SERIES
CFM
SIZE NPT
3/8"
3/8
4
3/8"
6
3/8"
8
10
3/8"
15
3/8"
25
3/8"
35
3/8"
45
3/4"
55
3/4"
65
3/4"
WEIGHT
410
490
560
800
870
990
1020
1140
1250
1450
1850
COST
5,601.60
6,350.40
6,786.72
7,958.88
8,451.36
9,444.96
9 966 24
9,966.24
10,743.84
12,633.12
13,180.32
15,939.36
WEIGHT
29
31
33
36
43
53
68
117
130
141
COST
1,228.24
1,312.93
1,456.93
1,567.07
1,846.58
2,922.35
3,091.76
3,345.89
3,600.00
3,684.70
Modular Dryers 4-65 CFM Purification System
Includes Prefilter, Dryer, Afterfilter, Control System,
Automatic Drain and Silencer
Up to Minus 40 Degree Dewpoint Performance
[email protected]
Local: 1-478-474-8460
16
AIR-COOLED AFTERCOOLERS
• AHP(H) utilizes brazed aluminum Bar and Plate core
Choose Vertical or Horizontal air flow
AHPH
Horizontal Air Flow
( Available on request )
• AA & UPA utilizes Aluminum fins on Copper tube core
Steel Cabinet with Detachable Legs
UPA Shown with Optional Separators
• Energy Efficient Designs
AHP
• Maximum Operating Pressure 250 PSIG
Vertical Air Flow
• Maximum Operating Temperature 350° F
Aftercoolers remove approximately 70% of moisture by reducing excess heat.
This allows condensate to be collected and discharged to the tank or in-line water trap filter.
May be installed alone or ahead of a refrigerated dryer for enhanced performance.
Designed to cool relatively larger compressed air flows with minimum pressure drop.
Air-Cooled Aftercoolers use ambient air as the cooling media.
Additional models, capacities and
product brochures available.
A flexible steel connector is required
between compressor and aftercooler.
See page 35.
AA
UPA
MAX CFM MAX CFM
INLET
@ 200° F @ 250° F SIZE NPT
FLOW
Motor
VOLT & Ø
H-W-D
Inches
WEIGHT
COST
1/2"
H or V
1/12 HP
ODP
115/230 1Ø
21.89-20.38-9.58
27 lbs.
534.98
50
1"
H or V
1/12 HP
ODP
115/230 1Ø
42.18-26.11-20.93
61 lbs.
646.76
125
100
1.5"
H or V
1/12 HP
ODP
115/230 1Ø
42.18-26.11-20.93
67lbs.
959.80
AA-150
172
150
1.5"
H
1/4 HP
ODP
115/230 1Ø
50.50-43.50-14.75 145 lbs.
1,368.06
F5025
AHP-400
430
400
2"
V
1 HP
TEFC
208/230/460 3Ø 19.95-22.45-17.48
120 lbs.
1,548.60
F5000
AHP-725
760
725
2"
V
1 HP
TEFC
208/230/460 3Ø 24.37-30.17-20.86
170 lbs.
2,048.79
Part #
MODEL
F5005
UPA-35
43
35
F5010
UPA-50
72
F5015
UPA-100
F5020
* CFM ratings are based upon a 15 degree approach over ambient air temperatures. * Ship weights are approximate.
Call: 1-800-342-6016
Fax: 1-478-471-1095
17
AIR-COOLED AFTERCOOLERS
BELTGUARD AFTERCOOLERS
For mounting on the beltguard,
Aftercoolers allow upgrade of existing
compressor unit. This enables storage
of cooler, dryer air in tank.
Copper Coil Aftercoolers
Part #
MODEL CFM HP
F6034
BGAC-5
20
5
F6031
BGAC-10
35 10
F6017
BGAC-25
75 25
F6049
BGAC-30 100 30
*Ratings Based upon 250 ° F@100 PSI
300 PSI Max. / 350 ° F Max.
WxH
20"x8"
20"x12"
26"x18"
25"x24"
All Aluminum Beltguard Aftercoolers
Improved Design, Higher Efficiency
Aluminum Coil Aftercoolers
Part #
MODEL
CFM
F6460
F6465
F6470
F6475
F6480
BGC-18
BGC-35
BGC-50
BGC-100
BGC-125
18
35
50
100
125
HP
WxH
5
20"x6"
7.5-10 20"x8"
15
20"x12"
20-25 26"x18"
30
25"x24"
NPT
3/4"
1"
1"
1"
1.25"
COST
87.75
113.08
167.08
268.33
347.63
*Ratings Based upon 250 ° F@100 PSI
250 PSI Max. / 300 ° F Max.
[email protected]
Local: 1-478-474-8460
NPT
1"
1"
1"
1.25"
COST
234.61
287.11
395.39
503.68
18
AIR HOSE
Coil Hose
Blow Gun
Blow Gun: with safety nozzle
1/4" FPT Inlet.
PolyCoil: designed for workstations;
highest quality and durability.
Nylon: self-storing;
general purpose.
Quick Connect Hose
Couplers On Page 20
Part #
TYPE
H7029
H7025
H7019
H7040
Part #
P1150
Nylon
Nylon
PolyCoil
PolyCoil
300 PSI Rubber Hose
MODEL
N14-25
N14-50
PU14-25AB
PU14-15AB
Item
ACS Blow Gun
SIZE
COST
1/4" x 25' - 1/4" NPT ends
1/4" x 50' - 1/4" NPT ends
1/4" x 25' - 1/4" NPT ends
1/4" x 15' - 1/4" NPT ends
Inlet
1/4" FPT Inlet
22.52
41.12
38.58
29.66
Cost
5.78
Made In The USA
Part #
SIZE
COST
H8103
H8104
H8105
H8100
H8101
H8102
H7030
3/8" x 25' - 1/4" NPT Ends
3/8" x 50' - 1/4" NPT Ends
3/8" x 100' - 1/4" NPT Ends
1/2" x 25' - 1/2" NPT Ends
1/2" x 50' - 1/2" NPT Ends
1/2" x 100' - 1/2" NPT Ends
3/4" x 50' - Twist-Lock Ends
34.55
60.91
104.64
48.32
87.38
126.44
80.93
Hammer Lock Fittings & Hose
Part #
SIZE
COST
S1282
S1283
S1284
S1285
S1286
S1287
S1290
S1295
S1280
S1281
2" Barb x 2" FPT
3" Barb x 3" FPT
2" Full Union
2" Union Half x 2" MPT
2" Clamp
3" Clamp
2" Close Nipple
3" Close Nipple
2" Hose (2.6" OD) 50 Foot
3" Hose (3.7" OD) 50 Foot
32.40
83.05
18.53
15.80
13.40
37.34
5.23
21.48
322.14
610.04
Clamp
Full Union
Nipple
1/2 Union x MPT
Call: 1-800-342-6016
Barb x FPT
2" and 3" Hose
Fax: 1-478-471-1095
19
HOSEREELS
Industrial Hosereel - by HoseTract
HOSE
Part #
MODEL #
OPERATING
PRESSURE
LENGTH
SHIPPING
WEIGHT
I.D.
COST
H7032
LC-350
300 PSI
3/8"
50 ft.
54 lbs.
289.43
H7021
LC-550
300 PSI
1/2"
50 ft.
58 lbs.
342.73
Industrial LC Series:
• Ideal for industrial use
• Service trucks, Plant maintenance
• Designed for applications
using air, water, and light oils
• Self retracting
Utility Hosereel - by HoseTract
I.D.
LENGTH
SHIPPING
WEIGHT
300 PSI
3/8"
50 ft.
41 lbs.
175.67
300 PSI
1/2"
50 ft.
45 lbs.
195.14
Size
Cost
Part #
MODEL #
RANGE
H7051
UTL-350
H7052
UTL-550
Replacement Hose Stops
HOSE
Safety Tip : When retracting hose,
always hold tension on hose as it
rewinds to prevent damage to reel.
H7055
Hose Stop
3/8"
15.19
H7056
Hose Stop
1/2"
15.19
COST
Replacement
Hose Stops
UNITRACT SERIES:
• Perfect for shops and garages
• Suitable for air or water
• Self retracting
[email protected]
Local: 1-478-474-8460
20
AIR HOSE FITTINGS
Part #
Series
Size
NPT
S1092
S1028
S1034
S1054
S1051
S1909
S1063
S1070
S1082
S1094
S1067
S1910
S1912
S1913
S1917
S1918
S1919
S1901
S1902
S1903
S1904
S1900
S1914
S1915
S1920
S1921
S1922
S1905
S1907
S1906
S1908
S1930
S1931
S1932
S1933
Automotive
Automotive
Automotive
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Tool
Tool
Tool
Tool
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
3/8"
1/4"
3/8"
1/4"
3/8"
1/2"
1/4"
3/8"
1/2"
1/4"
1/4"
3/8"
3/8"
1/2"
3/8"
1/2"
3/8"
1/2"
1/4"
3/8"
1/2"
3/8"
1/2"
TYPE
Connection
Coupler
Female
Plug
Female
Plug
Male
Coupler
Female
Male
Coupler
Female
Coupler
Plug
Female
Plug
Male
BARB
Coupler
Plug
BARB
Plug
BARB
Coupler
Female
Female
Coupler
Female
Coupler
Male
Coupler
Male
Coupler
Male
Coupler
Plug
Female
Plug
Male
Plug
Female
Plug
Male
Plug
Female
Female
Coupler
Female
Coupler
Male
Coupler
Male
Coupler
Plug
Male
Plug
Female
Plug
Female
Plug
Male
Plug
Male
Air Flow Valve
Air Chuck Ball (Plain)
Air Chuck Ball with Clip
Dual Air Chuck Extension
COST
8.94
1.70
1.60
5.04
5.04
5.67
1.13
1.16
6.60
2.04
2.16
11.80
8.40
12.90
11.90
8.26
11.40
3.00
2.30
1.94
1.94
5.40
15.00
9.80
12.80
9.90
3.20
5.60
4.40
3.80
4.20
7.92
2.99
7.63
6.32
1/4" AUTOMOTIVE COUPLERS & PLUGS
1/4" INDUSTRIAL COUPLERS & PLUGS
S1933
S1930
S1931
MULTIPLE CONNECTION MANIFOLDS
DESCRIPTION
COST
R3070
R3071
R3069
R3075
R3301
3 port (1/4" inlet)
3 port (3/8" inlet)
BAR MANIFOLD 2-1/2" & 6-1/4" PORTS
BLOCK MANIFOLD 4-1/4" PORTS
4 WAY SQUARE 4-1/4" PORTS
8.85
8.85
27.38
31.50
4.88

Part #
R3070
R3071
R3075
S1932
TWISTLOCK - Hose Connectors

S1238
R3069
R3301
Call: 1-800-342-6016
Part #
NPT SIZE
TYPE
COST
S1238
S1225
S1226
S1227
S1228
S1229
S1230
S1231
S1232
S1233
2"
1"
1"
1"
3/4"
3/4"
3/4"
1/2"
1/2"
1/2"
FEMALE
BARB
FEMALE
MALE
BARB
FEMALE
MALE
BARB
FEMALE
MALE
17.61
5.16
4.95
5.40
4.29
4.71
4.65
3.66
4.41
4.41
S1234
Anti-Whip Safety Cable
1/2" to 1-1/4"
13.83
S1237
S1235
S1239
S1236
Anti-Whip Safety Cable
1-1/2" to 3"
Rubber Gasket 1/2"to 1"
Rubber Gasket 2"
Safety Clip
23.85
0.39
1.26
0.45
Fax: 1-478-471-1095
21
Paving Sheets
Tools
Sticker
Maintenance Stickers
Rebuilding or repainting
your Compressor?
Complete the job with a
fresh set of labels.
For Standard Recip Type Compressors W1911
Peel Off Sticker Sheets
Pre-Cut Labels
Quality Vinyl
UV Resistant
Diamond Cutting Blades
For Rotary Screw Compressors W1915
Part #
Type
Size
COST
W1911
W1915
W1920
Recip
Rotary
Maint. Log
8.5"x14"
8.5"x14"
6.5"x8.5"
4.00
4.00
1.50
Rotary Screw Maintenance Sticker W1920
Keep a handy maintenance record right
on your compressor.
[email protected]
Local: 1-478-474-8460
22
ELECTRIC MOTORS
Part #
HP
WT
FRAME
RPM
SHAFT
PHASE
VOLT
COST
J5010
J5024
J5012
J5016
J5020
J5014
J5027
J5043
J5045
J5048
J5049
J5053
J5054
J5052
J5050
J5051
1/2
3/4
1
1.5
2
3
5
7.5
10
3
5
7.5
10
15
20
25
21 lbs.
26 lbs.
38 lbs.
39 lbs.
47 lbs.
75 lbs.
82 lbs.
131 lbs.
166 lbs.
63 lbs.
72 lbs.
154 lbs.
174 lbs.
275 lbs.
312 lbs.
356 lbs.
S56
S56
143T
G145T
145T
184T
184T
215T
215TZ
182T
184T
213T
215T
254T
256T
284T
1725
1725
1725
1725
1725
1725
1725
1725
1725
1760
1760
1760
1760
1770
1770
1770
5/8
5/8
7/8
7/8
7/8
1 1/8
1 1/8
1 3/8
1 3/8
1 1/8
1 1/8
1 3/8
1 3/8
1 5/8
1 5/8
1 7/8
single
single
single
single
single
single
single
single
single
3
3
3
3
3
3
3
115/208-230
115/208-230
115/208-230
115/208-230
115/208-230
230
208-230
230
230
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
256.69
280.12
335.15
379.00
493.74
535.29
414.05
806.40
1,180.05
424.03
492.06
673.60
772.50
1,088.74
1,329.98
1,702.48
UTILITY COMPRESSOR MOTORS
Part #
HP
WT
FRAME
RPM
SHAFT
J5039
SPL 2
27 lbs.
56
3450
5/8
J5041
J5042
J5029
2
3
5
27 lbs.
30 lbs.
40 lbs.
56
56
56
3450
3450
3450
5/8
5/8
5/8
Call: 1-800-342-6016
AMP / VOLT
15A / 7.5A 115
- 230 V
15A / 115V
15A / 115V
15A / 230V
COST
126.79
253.79
266.97
283.34
Fax: 1-478-471-1095
23
CAPACITORS
Motor Start Capacitors are Dry,
Electrolytic, Non polarized type
for AC motor starting. Rated 3
second start. 50/60 Hz
Motor Run Capacitors are Oil
Filled, Non PCB oil, Metalized
film, Insulated terminals, Metal
Cases. 50/60 Hz
Start Capacitors
Run Capacitors
Part #
Model #
Type
Shape / Case
J6400
J6405
J6410
J6412
J6415
J6420
J6425
J6430
J6435
J6438
J6440
J6445
J6450
J6455
J6460
J6465
J6470
PMJ400
PMJ540
PMJ590
PMJ645
PTMJ161
PTMJ216
PTMJ270
PTMJ400
PTMJ430
PTMJ630
TRC20
TRC25
TRC30
TRC40
TRC50
TRC60
TRCF20
Start
Start
Start
Start
Start
Start
Start
Start
Start
Start
Run
Run
Run
Run
Run
Run
Run
round/phenolic
round/phenolic
round/phenolic
round/phenolic
round/phenolic
round/phenolic
round/phenolic
round/phenolic
round/phenolic
round/phenolic
round/metal
round/metal
round/metal
round/metal
round/metal
round/metal
round/metal
Diameter
Height (In.)
(In.)
1-7/16
3-3/8
1-13/16
4-3/8
1-13/16
4-3/8
1-13/16
4-3/8
2-1/16
3-3/8
2-1/16
3-3/8
2-1/16
3-3/8
2-1/16
4-3/8
2-9/16
4-3/8
2-9/16
4-3/8
1-3/4
3-3/16
1-3/4
3-1/2
2
4-1/8
2
4-1/8
2
4-3/4
2-3/8
4-3/4
1-3/4
3-3/16
MFD
VOLT
COST
400 - 480
540 - 648
590 - 708
645 - 774
161 -193
216 - 259
270 - 324
400 - 480
430 - 516
630 - 750
20
25
30
40
50
60
20
110-125
110-125
110-125
110-125
220-250
220-250
220-250
220-250
220-250
220-250
370
370
370
370
370
370
440
5.55
6.30
6.87
7.92
7.44
9.39
11.04
21.90
22.98
21.72
4.62
5.25
6.87
8.46
10.38
12.00
5.67
Single phase motors often use start and run capacitors. If your motor trips the overload, or overheats, the
run capacitor may be suspect. If your motor hums but will not start, the start capacitor could be suspect.
However, hard starts may be caused by a defective tank check valve or unloader. Disconnect power before
servicing equipment. Capacitors should always be discharged before removal. All electrical repair and testing
should be performed by a qualified technician.
*No returns are allowed on electrical parts.
[email protected]
Local: 1-478-474-8460
24
MOTOR ACCESSORIES
Continuously Monitors Electrical
Service to Help Prevent Motor
Burnouts and Costly Repairs
Made in the USA - UL listed
CE Compliant
Line Voltage :190 to 480 VAC 50/60 Hz
Control Voltage: 24-120-240 VAC
Simple Installation.
Opens Control Circuit When Fault is Detected.
Adjustable Parameters.
Protects 3 Phase Motors from Loss of Phase , Low Voltage,
High Voltage, Voltage Imbalance, Phase Reversal, Rapid Cycling
Phase Monitor
Part #
W4390
Model
Phase Monitor 460
COST
115.31
Motor Rails- weld-down
Part #
TYPE
COST
M5511
M5519
M5516
M5513
M5520
M5505
145T electric
184T electric & TH18S
215 electric
256T electric
284T electric
Adapter Plate 10-15-20
11.25
11.25
11.25
15.75
15.75
54.58
*Prices shown are per pair.
Motor Adaptor Plate
M5505
Adapts existing 10/3 & 25/3
motor mounting slots to fit
10/1, 15/3 & 20/3 motors.
Compatible with ACS 120
Gallon Tank
Call: 1-800-342-6016
MOTOR BEARINGS
Part #
Bearing #
COST
B6203
6203zz
4.35
B6204
6204zz
4.20
B6205
6205zz
4.86
B6206
6206zz
6.99
B6207
6207zz
9.54
B6208
6208zz
12.00
B6209
6209zz
14.10
B6210
6210zz
16.53
B6211
6211zz
25.74
B6212
6212zz
34.41
B6303
6303zz
5.55
B6304
6304zz
6.78
B6305
6305zz
8.61
B6306
6306zz
12.54
B6307
6307zz
15.75
B6308
6308zz
20.30
B6309
6309zz
22.02
B6310
6310zz
28.42
B6311
6311zz
37.82
B6312
6312zz
49.65
B6313
6313zz
64.66
B6314
6314zz
64.66
Fax: 1-478-471-1095
25
PRESSURE SWITCHES
U1130
PRESSURE SWITCH - LEFOO
Part #
MODEL
Amp *FEATURES
U1120
LF10-4H-125
20
U1140
LF10-L-4H-125
20
U1142
LF10-L-4H-mm-125
20
U1125
LF10-1H-175
20
U1126
LF10-4H-175
20
U1127
LF10-1H-175
20
U1128
LF10H-1H-125
20
U1130
LF17-1H-175
24
Unloader - On Off 4 Port 1/4"UL
*Unloader - On Off 4 Port 1/4" UL
*Unloader - On Off 4 Port 6mm UL
Unloader - On Off 1 Port 1/4" UL
Unloader - 1 Port
1/4" UL
Unloader - 1 Port
1/4" UL
SETTING
COST
95 / 125
21.16
95 / 125
24.00
95 / 125
24.00
140 / 175
21.16
140 / 175
21.16
140 / 175
21.16
95 / 125
21.16
140 / 175
69.30
U1125
U1125 - Side view
U1140 & U1142
*Unloader has compression ferrol fitting. Choose 1/4" O.D. or 6 mm OD
PRESSURE SWITCHES - Hubbell-Furnas-Siemens
Part #
MODEL
AMP
SPECS
DIFFERENTIAL
* RANGE
SETTING
COST
W4080
69JF7Y
20
25-33
50-145
95/125
34.89
W4081
69JF7LY2C
20
Unloader
Unloader-On/Off
Manual Sw.- 4 Pt.
25-33
50-145
95/125
40.70
W4039
69HAU3
24
w/ Unloader
7-15
15-60
30/40
154.23
W4082
69JF9Y
20
Unloader
30-40
100-175
140/175
34.89
W4083
69HAU1
24
w/ Unloader
35-60
40-250
115/150
154.05
30-40
100-175
140/175
51.60
Unloader-On/Off
Manual Sw.- 4 Pt.
* Range refers to Cut Off Point , ** Setting = on / off
W4084
69JG9LY2C
24
W4081
4 Port
W4082
W4083
PRESSURE SWITCHES - SQUARE ‘D’
Part #
MODEL
AMP
SPECS
W4052
DIFFERENTIAL
*RANGE
SETTING
COST
0.8-9"Hg
0-28.7"Hg
Not set
233.40
30
30
70-150
70-150
95/125
95/125
23.35
30.89
W4061
9016GAW-1
10
W4053
W4055
9013FHG-12J52
9013FHG-12J52X
20
20
Vacuum Switch
NEMA 4, 4x, 13
Standard Switch
Unloader
W4203
9013FHG-12J52MIX
20
Unloader, On-Off Switch
30
70-150
95/125
34.79
W4204
9013FHG-14J52MIX
20
Unloader, On-Off Switch
4-port Manifold
30
70-150
95/125
41.70
W4058
W4054
9013FHG-32J52
9013FHG-42J59
9013FHG-42J59X
9013GHB-2J58X
9013GHG-6J62
9013GHG-6J62X
24
20
20
16
16
16
30
40
40
20-40
24-45
24-45
70-150
100-200
100-200
65-200
80-250
80-250
95/125
140/175
140/175
125/150
140/175
140/175
33.29
22.31
30.89
138.01
66.35
93.12
W4060
9013GHR-2J57X
16
30-50
65-200
125/150
388.22
Not set
175.15
W4056
W4052
W4059
W4057
Std-HD Switch
Standard Switch
Unloader
R3-Rain-proof Rating
Std-HD Switch
HD-Unloader
NEMA -9
Explosion proof
**Differential Control
W4030
9012-GNG-5
10
4.2-22
3-150
**Suitable as replacement for AB-836-C7A. For Rotary Screw Controls. * Range refers to Cut Off Point *** Setting = on / off
< 4 Port
W4204
W4030 Rotary
Screw
Switch
>>>>>
[email protected]
Local: 1-478-474-8460
W4054
26
REPLACEMENT STARTERS
< DP Starter
All DP Starters on this page include
Enclosure, Contactor and Overload.
LE Starters include Enclosure & Contactor
LE Starter >
DP Heaters Sold Separately
LE Adjustable Overload Sold Separately
Motor &
Contact
Plus
(Required)
Part #
PHASE Model
COST
Coil
Amps
(Qty)
Heater Type
B28
5
208
3
DP23-9
25
178.78
3
of
W4473
B36
5
230
1
DP32-9
30
161.64
1
of
W4464
B25
5
230
3
DP23-9
25
178.78
3
of
W4462
B11.5
5
460
3
DP23-6
25
176.38
3
of
W4460
B45
7 1/2
208
3
DP43-9
40
193.34
3
of
W4466
B56
7 1/2
230
1
DP42-9
40
179.80
1
of
W4474
B36
7 1/2
230
3
DP23-9
25
178.78
3
of
W4464
B17.5
7 1/2
460
3
DP23-6
25
176.38
3
of
W4461
B56
10
208
3
DP43-9
40
193.34
3
of
W4474
B79
10
230
1
DP52-9
50
224.28
1
of
W4469
B45
10
230
3
DP43-9
40
193.34
3
of
W4466
B25
10
460
3
DP23-6
25
176.38
3
of
W4462
B79
15
208
3
DP53-9
50
401.80
3
of
W4469
B70
15
230
3
DP53-9
50
401.80
3
of
W4468
B36
15
460
3
DP43-6
40
193.34
3
of
W4464
LRD365
20
208
3
LE1D65
65
453.46
1
of
W4419
LRD365
20
230
3
LE1D65
65
453.46
1
of
W4419
B45
20
460
3
DP53-6
50
401.80
3
of
W4466
LRD3363
25
208
3
LE1D80
80
545.62
1
of
W4415
LRD3363
25
230
3
LE1D80
80
545.62
1
of
W4415
B56
25
460
3
DP53-6
50
401.80
3
of
W4474
Auxiliary Contact N.O. / N.C. for DP23,32,42,43 starters shown above.
Auxiliary Contact N.O. / N.C. for LE1D65&80 starters shown above.
* Auxiliary Contact for DP52 & 53 use table on page 27
** For 1/2 HP to 3 HP (3PH Motors), Use DP23 Starter and specify Motor HP & Voltage for Heaters.
Part # Motor HP
W4051
W4044
W4051
W4452
W4043
W4046
W4051
W4452
W4043
W4065
W4043
W4452
W4048
W4048
W4450
W4525
W4526
W4451
W4527
W4528
W4451
W4318
W4315
Call: 1-800-342-6016
Fax: 1-478-471-1095
Cost
(Each)
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
129.72
129.72
16.07
130.89
130.89
16.07
30.60
27.36
A U X CONTACTS
Part #
AUX-10
AUX-01
AUX-11
AUX-20
AUX-N6
AUX-N8
W4317
HEATERS
Part #
HEAT-B
HEAT-CC
STARTER TYPES
DP32,42,52,23,43,53
NEMA-0,1,2,5
DP-63,73,93
NEMA-3,4
27
REPLACEMENT STARTERS
DP Starter Parts
COST
21.58
21.58
3 AMP
TYPE
1N.O.
1N.C.
1N.O. & 1N.C.
2N.O.
1N.O.
1N.O. & 1N.C.
Overload Sw
COST
27.02
27.02
50.50
50.50
42.00
51.98
53.18
SWITCHES
STARTER TYPE
Auxillary Sw
AUX-10, 01,11, 20
Overload Contact
Switch.
START STOP
*BRACKET
KIT DP52&53
H-O-A
DP 23,32,42,43
W4111
66.30
W4121
60.66
DP 52,53,63,73,93
W4111
66.30
W4121
60.66
NEMA Size 0-3
W4115
49.02
W4125
49.28
NEMA Size 4-5
W4116
93.80
W4126
92.58
W4201
50.78
fit DP52 & 53 Only
The Bracket Kit is used to Mount Switch on 52 and 53 Starters only.
AUX-N6 & N8
Fits DP 32-53
and Nema 0-4
(Bracket Kit not required for 23, 32, 42 and 43 Starters.)
fit NEMA Starters
NEMA Starters - 3 Phase
Part #
MODEL
SIZE
AMP Rating
Max HP Range @ Voltage
Coil V.
HEATER TYPE
COST
W4075
SBG2
0
18
3-200/3-230/5-460
120 or 230
B
285.48
W4076
SCG3
1
27
7.5-200/7.5-230/10-460
120 or 230
B
322.94
W4077
SDG1
2
45
10-200/15-230/25-460
120 or 230
B
548.60
W4045
SEG1
3
90
25-200/30-230/50-460
120
CC
1,157.33
W4042
SFG1
4
135
40-200/50-230/100-460
120
CC
1,543.11
W4049
SGG1
5
270
75-200/100-230/200-460
120
B
2,895.75
* All Nema Starters include Nema 1 general purpose enclosures and are equipped with one N.O. auxiliary contact. Additional Aux contacts may be added.
Machine Shop Service
We Manufacture Replacement Parts, Obsolete and Prototype
Large or Small Jobs Accepted - Single Piece or Batch Lots
• CNC Machining • Turning • Drilling • Grinding
• Milling • Prototypes • Repairs
Custom Design Drawings Provided for Customer Approval
[email protected]
Local: 1-478-474-8460
28
MOTOR PULLEYS
Part #
Pulley Model
J5500
1A22X5/8
J5505
1A25X5/8
J5510
1A27X5/8
J5515
1A30X5/8
J5520
1A35X5/8
J5525
1A35X7/8
J5530
1A40X7/8
J5535
1A45X7/8
J5540
1A50X7/8
J5545
1A55X7/8
J5550
1A60X7/8
J5600
2B35
J5605
Bushing
Required
Outside
Grooves Dimension
Inches )
FIXED BORE
5/8"
FIXED BORE
5/8"
FIXED BORE
5/8"
FIXED BORE
5/8"
FIXED BORE
5/8"
FIXED BORE
7/8"
FIXED BORE
7/8"
FIXED BORE
7/8"
FIXED BORE
7/8"
FIXED BORE
7/8"
FIXED BORE
7/8"
(
Use Belt
Type
COST
Economy
Pulleys

ACS PULLEYS
1
2.2
A or 4L
8.76
1
2.5
A or 4L
11.00
1
2.7
A or 4L
10.82
1
3.05
A or 4L
13.20
1
3.45
A or 4L
15.30
A-B Pulley
1
3.45
A or 4L
13.90
(Bushing Type)
1
3.95
A or 4L
13.20
1
4.45
A or 4L
18.72
1
4.95
A or 4L
19.40
1
5.45
A or 4L
21.28
1
5.95
A or 4L
23.84
L OR H
2
3.55
B or 5L
30.06
2B39
L OR H
2
3.95
B or 5L
35.46
J5610
2B44
L OR H
2
4.45
B or 5L
45.78
J5615
2B52
L OR H
2
5.25
B or 5L
46.28
J5620
2B62
L OR H
2
6.25
B or 5L
60.90
J5625
2B69
L OR H
2
6.95
B or 5L
65.52
J5630
2B77
L OR H
2
7.75
B or 5L
83.62
** All pulleys are A, B, 4L and 5L compatible.
MASKA PULLEYS
Grooves
Outside
Dimension
( Inches )
Use Belt
Type
COST
1
3.95
A or 4L
18.41
1
3.95
A or 4L
18.41
1
4.95
A or 4L
21.05
L OR H
2
5.75
B or 5L
45.16
2MBL97
L OR H
2
9.75
B or 5L
70.77
J6300
2B110
SK
2
11.35
B or 5L
85.46
J6045
3B52
SD
3
5.55
B or 5L
61.09
J6050
3B56
SD
3
5.95
B or 5L
61.09
J6055
3B66
SD
3
6.95
B or 5L
76.83
J6060
3B70
SK
3
7.35
B or 5L
80.78
J6040
3B110
SK
2
11.35
B or 5L
122.15
J6064
4B68
SK
4
7.75
B or 5L
102.44
J6065
4B74
SK
4
7.75
B or 5L
110.34
J6070
4B86
SK
4
8.95
B or 5L
122.15
J6075
4B94
SK
4
9.75
B or 5L
135.93
Part #
Pulley Model
J6080
MA40X3/4
J6085
MA40X5/8
J6090
MA50X34
J6015
2MBL57
J6035
Bushing
Required
FIXED
BORE 3/4"
FIXED
BORE 5/8"
FIXED
BORE 3/4"
Call: 1-800-342-6016
Fixed Bore
Bushing
Motor pulleys are subject to wear and tear
resulting in slippage and belt damage.
Exposure to hostile enviroments such as
cement dust, sand or other contaminates
will, over time, cause abrasive damage to
pulley grooves.
Other sizes are available on request.
Contact ACS for assistance in sizing of
motor pulleys.
MASKA BUSHINGS
Part #
Bushing
Model
J6200
J6205
J6206
J6215
J6210
J6220
J6225
J6226
J6227
LX1
LX1-1/8
LX1-3/8
SKX1-3/8
SKX1-5/8
SKX1-7/8
SDX1-3/8
SDX1-5/8
SKX1-7/8
Bore
Dimension (
Inches )
1
1-1/8
1-3/8
1-3/8
1-5/8
1-7/8
1-3/8
1-5/8
1-7/8
Bushing
Type
COST
L OR H
L OR H
L OR H
SK
SK
SK
SD
SD
SD
8.42
8.42
8.42
24.88
24.88
24.88
19.33
19.33
19.33
Fax: 1-478-471-1095
29
BELTS
Replacement Belts
B SECTION BELTS
4L SECTION BELTS
Part #
BELT #
Outside
Dimension
Inches
"5L" Belt
Conversion
COST
Part #
BELT #
I2300
B50
52
530
9.44
I2450
4L360
36
34
5.00
I2305
B52
54
550
9.80
I2455
4L370
37
35
5.12
I2310
B54
56
570
10.12
I2460
4L380
38
36
5.24
I2315
B56
58
590
10.48
I2465
4L390
39
37
5.36
I2320
B58
60
610
10.80
I2470
4L400
40
38
5.48
I2325
B60
62
630
11.16
I2475
4L410
41
39
5.64
I2330
B62
64
650
11.48
I2480
4L420
42
40
5.76
I2335
B65
67
680
12.00
I2485
4L430
43
41
5.88
I2340
B68
70
710
12.52
I2490
4L440
44
42
6.00
I2345
B70
72
730
12.84
I2495
4L450
45
43
6.12
I2350
B72
74
7750
13.20
I2500
4L460
46
44
6.28
I2355
B75
77
780
13.68
I2505
4L470
47
45
6.40
I2360
B78
80
810
14.20
I2510
4L480
48
46
6.52
I2365
B80
82
830
14.56
I2515
4L490
49
47
6.64
I2370
B82
84
850
14.88
I2520
4L500
50
48
6.80
I2375
B85
87
880
15.40
I2525
4L510
51
49
6.92
I2380
B88
90
910
15.92
I2535
4L520
52
50
7.04
I2385
B90
92
930
16.28
I2540
4L530
53
51
7.16
I2390
B92
94
950
16.60
I2545
4L540
54
52
7.28
I2395
B95
97
980
17.12
I2550
4L550
55
53
7.44
I2400
B97
99
1000
17.44
I2555
4L560
56
54
7.56
I2405
B99
101
1020
17.80
I2560
4L570
57
55
7.68
I2410
BP100
102
__
17.96
I2565
4L580
58
56
7.80
I2415
BP103
105
__
18.48
I2570
4L590
59
57
7.96
I2420
BP105
107
__
18.84
I2575
4L600
60
58
8.08
I2425
BP108
110
__
19.32
I2580
4L610
61
59
8.20
I2430
BP112
114
__
20.04
I2585
4L620
62
60
8.32
I2435
BP118
120
__
21.04
I2590
4L630
63
61
8.44
I2595
4L640
64
62
8.60
I2600
4L650
65
63
8.72
5L= 21/32" w x 3/8" h 4L= 1/2" w x5/16" h
[email protected]
Outside
"A" Belt
Dimension
Conversion
Inches
COST
Belts should be
replaced at least
every three years.
Glazed, brittle or
cracking belts must
be replaced.
Unlike cars, most
compressors
will not make an
audible squealing
noise when belts
are slipping.
Slipping belts may
cause nuisance
circuit breaker
tripping, excessive
vibration and may
rip motor mounts
apart from sudden
snatching of belts
in spinning pulley.
Loose belts may
cause overheating
and a possible belt
fire.
Over tightening
belts may result
in bearing or shaft
failure.
Poly Groove Belts and
Pulleys located on page 82
Local: 1-478-474-8460
30
M5550
ENGINES - Gas & Diesel
5.5 HP HONDA
M5035
13HP HONDA
M5037
M5043
10 HP KOHLER DIESEL
20 HP HONDA
M5042
Part #
Engine
Model #
HP
Start
M5043
Kohler Diesel
KD420
10
12 Volt Electric with Recoil
CH440ST
14
M5042
Kohler
M5550
Honda
GX160-UTIQX2
5.5
Recoil Only -No starter
M5035
Honda
GX390-UIQAE2
13
M5039
Honda
GX390-UIQA2
13
Recoil Only -No starter
M5037
Honda
GX630-RQAF1
20
12 Volt Electric
M5041
Honda
5 gallon fuel tank & carbon canister kit for GX630
I2046
Honda
Mounting Bracket Set for 5 Gallon Tank Kit M5041
I2047
Honda
Stainless Steel Strap for Fuel Tank Bracket Set (order 2)
* Horsepower ratings are approximate values.
14 HP KOHLER
WT
102 lbs.
110 lbs.
34 lbs.
75 lbs.
75 lbs.
108 lbs.
25 lbs.
COST
2,758.75
793.85
418.36
1,045.08
785.86
1,761.64
179.94
68.63
6.45
Call: 1-800-342-6016
Fax: 1-478-471-1095
31
ENGINE Accessories
Engine Idlers
M5521
M5604
M5525
M5527
M5545
M5531
M5528
M5512
Bullwhip Idlers
Cable Type Idlers
Part #
M5540
M5541
M5542
M5543
TYPE
Application
L-36 Large Cylinder Fits 8HP & up
S-36 Small Cylinder Fits 5-6 HP
L-24 Large Cylinder Fits 8HP & up
S-24 Small Cylinder Fits 5-6 HP
Length
COST
36"
36"
24"
24"
37.88
21.28
36.29
19.68
Part #
MODEL
HP
COST
M5525
M5527
M5545
M5531
M5521
M5512
M5528
Honda GX390
Honda GX620
Honda GX630 (new)
Kohler CH440ST (new)
Kohler Command
Kohler K Series & Magnum
Kohler Diesel KD420
Kohler Diesel KD420-A
KDA Complete Idler Kit
KDA SPRING
KDA CYLINDER
KDA TIE ROD END
KDA 1/4" TUBING 4FT
KDA FTG 1/4X1/8
KDA FTG EL 1/4X1/8
KDA VENT MUFFLER 1/8"
KDA Brackets & Bolts Kit
11-13
20
20
14
11, 13, 15
10, 12
10
58.28
58.28
70.43
58.28
42.00
42.00
86.84
10
10
10
10
10
10
10
10
10
153.10
5.58
40.98
8.19
2.91
3.13
4.00
10.47
78.00
M5604
M5599
M5600
M5601
M5602
T1053
T1059
S4015
M5603
Adapter Plate Set for CH13S engine – Fits K241-301 or M12S: M5522 49.88
Belt Tightener – For engines or motors with slotted bases:
Fuel Tank Mounting
*M5041 Fuel tank &
Carbon Canister Kit
< See Pricing on Page 30
* I2046 & I2047 not incliuded.
I2046


I2047
M5523 31.71
Circuit Breaker
Circuit Breaker
adds protection
to the electrical
system in case
of overload or
shorting to
ground.
Part #
M5040
Item
Circuit Breaker
AMP
120
Volt
12
Circuit Breaker,
(For Starter Cable) - Fits
all engines shown on
page 30.
[email protected]
Local: 1-478-474-8460
COST
45.12
32
Tanks
Compressor Tanks
Made In
The USA
Part #
SIZE
CONFIG.
PSI
DESCRIPTION
LxW
TOP
PLATE
WEIGHT
COST
I2015
8 gal
twin
150
w/o wheels/non-code
36 x 18
24 x 9
55 lbs.
210.40
I2020
20 gal
horiz
150
w/o wheels/non-code
33 x 14
18 x 7.5
63 lbs.
192.49
I2031
30 gal
horiz
200
big top plate
38 x 16
34 x 10
140 lbs.
385.55
I2035
30 gal
vert
200
std top plate
38 x 16
23 x 9
99 lbs.
354.38
I2028
60 gal
horiz
200
std top plate
48 x 20
36 x 12
177 lbs.
483.99
I2026
60 gal
vert
200
std top plate
48 x 20
36 x 12
173 lbs.
483.99
I2012
80 gal
horiz
200
std top plate
63 x 20
36 x 12
230 lbs.
508.60
I2025
80 gal
vert
200
std top plate
46 x 24
36 x 12
269 lbs.
470.86
I2021
120 gal
horiz
200
std top plate
69 x 24
44 x 16
343 lbs.
730.08
I2019
120 gal
vert
200
std top plate
46 x 30
39 x 15
432 lbs.
853.13
I2014
240 gal
horiz
200
std top plate
84 x 30
44 x 16
658 lbs.
1,140.24
I2013
120 gal
vert/remote
200
no top plate
69 x 24
none
301 lbs.
648.05
I2029
240 gal
vert/remote
200
no top plate
84 x 30
none
620 lbs.
1,071.33
I2036
400 gal
vert/remote
165
no top plate
93 x 36
none
728 lbs.
1,527.75
I2081
660 gal
vert/remote
150
no top plate
120 x 42
none
1560 lbs.
3,658.46
I2080
1060 gal
vert/remote
150
no top plate
144 x 48
none
2195 lbs.
5,002.60
I2037
For Small Pumps
BASE PLATE
NA
34 x 10
50 lbs.
153.56
I2038
For 5 to 10 HP Pumps
BASE PLATE
NA
36 x 12
75 lbs.
157.50
I2039
For up to 25 HP Pumps
BASE PLATE
NA
44 x 16
100 lbs.
187.04
30 Gal through 1060 Gal Tanks listed above are Made in the USA and ASME Coded.
Tanks are painted with gray or red primer. Scuffing and blemishes are to be expected.
Call: 1-800-342-6016
Fax: 1-478-471-1095
33
Pipe Chart
Use pipe chart to select proper pipe size.
5%(/
Add 10 ft for every
turn in piping.
Determine total SCFM
output of compressor
and the farthest point
of use for ideal pipe
size.
Alternate method is to
determine maximum
consumption of air at
farthest point of use.
The HP Column
corresponds to the
average SCFM rating
of compressor.
*2
Warranty
ACS WARRANTS EACH COMPRESSOR UNIT MANUFACTURED BY ACS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP AS FOLLOWS:
Gray Line Pumps: 90 days from time of purchase.
All other pumps, motors & tanks featured in this catalog; 12 months from time of purchase.
ACS shall perform warranty work.
Warranty repairs shall not include freight costs.
ACS must supply parts used for warranty purposes.
ELECTRICAL COMPONENTS: MAGNETIC STARTERS, WIRING AND ACCESSSORY SWITCHES WARRANTED FOR 90 DAYS.
GAUGES AND TANK VALVES WARRANTED FOR 30 DAYS.
Service and Maintenance procedures such as Oil Changes, Filter or Drive Belt Replacement or Adjustments,
Gasket or Fitting Tightening to correct oil or air leakage, and Pump Valve Cleaning are not covered under warranty.
Warranty shall be void under the following conditions:
Failure to routinely change oil and to maintain a clean filter.
Exceeding 65% duty cycle resulting in overheating and excessive wear and tear.
Exposing electrical components to condensate, rain or water.
Installing unit in hostile environment such as acid vapors or any caustic or abrasive matter that may be ingested into pump.
Installing unit in enclosed area where lack of cooling ventilation is present or where the ambient air exceeds 100 degrees Fahrenheit.
Damage arising from exposure to freezing temperatures.
Installing or operating unit out of level causing lubrication failure.
Failure to maintain proper oil level or use of incorrect lubricant.
Tank stress damage from failure to use Vibration Pads or installing out of level. Twisting or binding (bolting) tank legs on uneven floor.
Over tightening belts, or failure to maintain proper belt tension.
ACS’s policy is one of continuous improvement of our products. We reserve the right to change specifications without incurring obligations as to units
previously or subsequently sold.
Notice
A qualified technician is required to install, repair, modify, adjust, inspect, or diagnose any Compressor Pump, Compressor Unit or it's Components.
Owner/User/Installer assumes all liabilities and risks of personal injury, direct or indirect, incidental or consequential loss, or damages to equipment,
vehicles, buildings or other property, and no claim for any such injury, loss or damages will be asserted by owner/user/installer or accepted by ACS.
[email protected]
Local: 1-478-474-8460
34
Vibration Isolators
Machine Leveling Mounts
For Rotary Screw
Compressors
and Heavy Machinery
High Capacity Loading
Steel Housing
Neoprene Elastomer Base
Vibration Dampening
1/2" Adjustable Range
Part #
I1900
I1910
I1920
I1930
Max Load
500 lbs.
1000 lbs.
4500 lbs.
13,000 lbs.
Min Load
100 lbs.
300 lbs.
500 lbs.
4000 lbs.
Diameter
3-1/8"
4-3/4"
6-1/4"
9"
Height
1-1/2"
1-1/2"
1-5/8"
2-1/4"
Bolt
3-8"
1/2"
3/4"
3/4"
*Leveling Mounts
sold as single piece.
Load ratings shown are for
each single mount.
Cost
27.33
35.56
46.49
100.62
Vibration Isolator Pads
6"x6"x1/2"
High Density Nitrile
Oil Resistant
Set of Four Pads
I2761
Call: 1-800-342-6016
4"x4"x1"
Solid Rubber
Set of Four Pads
I2027
Part #
Type
I2027
I2761
Rubber
Nitrile
COST
1 set
42.75
50.93
Fax: 1-478-471-1095
FLEX CONNECTORS
35
Flex & Ball Valves
Part #
NPT
SIZE
S1017
S1242
S1037
S1243
S1024
S1244
S1040
S1245
S1087
S1246
S1086
S1248
S1046
S1249
S1064
S1251
S1016
S1018
S1091
S1038
S1059
S1048
S1042
S1043
S1240
S1241
Steel - Male x Male
Steel - Male x Flare
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Steel - Male x Male
Copper
Copper
1/2" x 18"
1/2" x 18"
1/2" x 24"
1/2" x 24"
3/4" x 18"
3/4" x 18"
3/4" x 24"
3/4" x 24"
3/4" x 30"
3/4" x 30"
1" x 18"
1" x 18"
1" x 24"
1" x 24"
1" x 30"
1" x 30"
1 1/4" x 18"
1 1/4" x 24"
1 1/2" x 18"
1 1/2" x 24"
2" x 18"
2" x 24"
2 1/2" x 18"
3" x 18"
1/2" OD x 18"
3/4" OD x 24"
Maximum
Working Pressure
950 PSI
950 PSI
950 PSI
950 PSI
725 PSI
725 PSI
725 PSI
725 PSI
725 PSI
725 PSI
575 PSI
575 PSI
575 PSI
575 PSI
575 PSI
575 PSI
500 PSI
500 PSI
425 PSI
425 PSI
375 PSI
375 PSI
325 PSI
275 PSI
200 PSI
200 PSI
Male x Male NPT
COST
24.84
34.14
26.68
35.62
29.92
38.22
34.20
42.82
33.60
47.10
34.66
54.18
37.80
57.30
42.30
71.44
46.80
51.52
51.60
80.46
62.40
70.50
108.60
125.10
45.32
72.06
<<< Male Flare Fitting
Adapter Included on
Male x Flare Models
Ball Valves
[email protected]
SIZE
COST
V1005
1/4"
6.83
V1006
3/8"
6.83
V1007
1/2"
8.18
V1008
3/4"
11.97
V1009
1"
18.64
V1010
1-1/4"
27.44
V1011
1-1/2"
40.68
V1012
2"
63.60
V1004
Stem
8.67
1/8"
Valve Stem
V1004


Part #
Local: 1-478-474-8460
36
Gauges & Beltguards
Gauges
Part #
CBM
Center Back Mount
NPT
MTG
RANGE
FACE
COST
S2805
1/8"
CBM
160
1-1/2"
S2800
1/4"
CBM
160
2"
S2815
1/4"
CBM
200
2"
S2820
1/4"
CBM
300
2"
S2830
1/8"
LM
160
1-1/2"
S2825
1/4"
LM
200
2"
S2835
1/2"
LM
200
4"
S2810
1/4"
LM
300
2"
S1090
1/2"
**LM
200
4"
** Gauge is liquid filled.
Panel Gauges & Hour Meters Page 64
5.66
5.99
5.99
5.99
6.50
5 99
5.99
20.22
5.99
31.50
Expanded Metal Beltguards
LM
Lower Mount
Large Kit extends the BG6
Beltguard for 462 Pumps
Standard Kit
I2045
I2040
Mounting Bracket Kit for Beltguards
8" Brace I2048
11" Brace I2049
One Piece / Front Cover
Bolt On -Top Mounting Braces
Part #
Slip Over / Bottom Tray
Slope Type
Model
SIZE
TYPE
I2700
BG-1P
13"x24"x3"
one piece w/ cover
I2705
BG-2P
15"x24"x3"
one piece w/ cover
I2710
BG-3P
17"x33"x4"
one piece w/ cover
I2745
BG-3SP 17X33X4 S
*Slope/1pc w cover
I2715
BG-4P
19"x36"x4"
one piece w/ cover
I2750
BG-4SP
19x36x4 S
*Slope/1pc w cover
I2755
BG-10P
22x40x5
one piece w/ cover
I2720
BG-5P
23"x40"x5"
one piece w/ cover
I2725
BG-6P
28"x48"x7"
one piece w/ cover
I2730
BG-7P
19"x36"x4"
slip over w/ tray
I2735
BG-8P
23"x40"x5"
slip over w/ tray
I2740
BG-9P 22"x38"x4.5"
one piece w/ cover
I2040
BG-KIT-S
Standard
Mounting Kit 3 piece
I2045
BG-KIT-E
Extended
Mounting Kit 3 piece
I2048
BGB-S
Standard
Top Brace 1 Piece
I2049
BGB-E
Extended
Top Brace 1 Piece
* Slope guards are intended for engine powered units
COST
48.75
52.65
78.78
83.85
91.26
96.33
126.36
122.07
191.62
86.58
117.00
99.06
20.21
44.69
11.25
11.25
OSHA requires all exposed moving parts on
Compressor must be covered by a guard.
Call: 1-800-342-6016
Fax: 1-478-471-1095
37
Tubing & Fittings
Part #
T1075
T1076
T1077
T1078
T4000
T4001
T4002
T4003
Special Fittings for COPPER TUBING
TYPE
3/4" Flare Nut
3/4" NPT Male x 3/4" Flare Connector
3/4" NPT Male 90 EL x 3/4" Flare Connector
3/4" NPT Male 45 EL x 3/4" Flare Connector
3/4" NPT Male x 3/4" Compression
3/4" NPT Male x 3/4" EL Compression
3/4" Ferrol
3/4" Nut
Part #
T1031
COPPER TUBING
UNIT
SIZE
per foot
3/4"
COST
7.02
7.63
13.32
16.38
10.28
16.43
1.46
3.49
COST
3.00
Field fabricate your own exhaust
tubes without kinking. Order two 3/4"
Spring Benders for the best control.
TUBE BENDERS (Spring Type)
Part #
COST
T1000 3/4" Bender
5 Piece Set:
T1001
1/4", 3/8", 1/2", 5/8", 3/4"
Compression Fittings
T1020 Tubing Cutter
8.60
Tubing Cutter
1/8" to 1-1/8" O.D.
T1020
27.93
13.21
Copper Tubing Fittings
FITTINGS
Branch Tee 1/8" NPT
Branch Tee 1/4" NPT
Compression Nut
Compression Tee
Ferrol
Compression EL x NPT
Part #
ITEM
COST
T1100
T1110
T1120
T1130
T1140
T1150
T1160
T1170
T1175
T1180
T1190
T1210
T1220
T1230
T1240
T1250
BRANCH TEE 1/4" COMP X 1/8" NPT
BRANCH TEE 1/4" COMP X 1/4" NPT
TEE 1/4" COMPRESSION
EL 1/4" COMP X 1/4" NPT
EL 1/4" COMP X 1/8" NPT
1/4" COMP X 1/4" NPT
1/4" COMP X 1/8" NPT
COMP NUT 1/4"
COMP NUT 5/16"
COMP FERROL 1/4"
COMP FERROL 5/16"
BUSHING 1-1/2" X 1/2"
BUSHING 1-1/2" X 3/4"
BUSHING 2" X 1/2"
BUSHING 2" X 3/4"
BUSHING 2" X 1"
5.90
6.81
5.36
3.43
2.86
1.69
1.92
0.78
0.83
0.21
0.21
5.23
5.23
8.16
6.92
6.92
Compression x NPT
Bushing
[email protected]
All ASME Tanks Require Large Bushings
30 Gal Tank = 1-1/2" , All Other Tanks = 2"
Local: 1-478-474-8460
38
SAFETY VALVES
Safety Valves
"ASME CODED"
KUNKLE
®
Pentair®
6010
Safety Valves
Part #
SIZE
PSI
COST
S1221
S1032
S1200
S1201
S1202
S1203
S1204
S1206
S1205
S1207
S1220
S1300
S1301
S1306
S1302
S1303
S1304
S1305
S1065
S1400
S1401
S1402
S1403
S1404
S1405
S1500
S1501
S1502
S1503
S1504
S1505
S1506
S1510
S1507
S1508
S1511
S1509
1/8"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
1"
1"
1"
1.25"
1.25"
1.25"
1.25"
1.25"
250
50
60
75
100
125
150
175
200
250
325
50
75
100
125
150
175
200
50
75
100
125
150
175
200
75
100
125
135
150
175
200
125
135
150
175
200
12.85
9.76
10.24
12.61
10.24
10.24
10.24
10.24
10.24
12.61
17.78
22.29
22.29
22.29
22.29
22.29
22.29
22.29
45.36
47.52
47.52
47.52
47.52
47.52
47.52
78.81
78.81
78.81
78.81
78.81
78.81
78.81
82.53
82.53
82.53
82.53
82.53
KUNKLE 6010 SAFETY VALVES
*Special Pressures,
Capacities, and
Thread Sizes
Available Upon
Request.
Call: 1-800-342-6016
Part #
SIZE
CFM
PSI
COST
S1195
S1196
S1193
S1194
S1208
S1209
S1210
S1211
S1212
S1213
S1214
S1215
.75"
.75"
1"
1"
1.25"
1.25"
1.5"
1.5"
2"
2"
2.5"
2.5"
318
350
567
625
888
978
1455
1602
2267
2496
3714
4090
135
150
135
150
135
150
135
150
135
150
135
150
185.03
185.03
217.06
217.06
265.15
265.15
319.05
319.05
474.95
474.95
680.38
680.38
Fax: 1-478-471-1095
39
ALL-IN-ONE
ALL-IN-ONE VALVES
S1031
S1030
S1023
20 CFM
20 CFM
20 CFM
S1632
S1192
S1033
12 CFM
20 CFM
60 CFM
The All-in-One Valve automatically vents the compressor discharge line when the
air supply of the compressor is greater than the air demand. It is recommended
for gas or electric driven air compressors without intake unloaders where the
compressor is to operate continuously while maintaining a constant pressure.
S4019
Diffuser
Sold Separately
Part #
S1023
S1192
S1632
S1030
S1031
S1033
S4019
TYPE
CDI
CDI
Conrader
Conrader
Conrader
Conrader
[email protected]
Inlet
1/2" NPT
1/2" NPT
1/2" Flare
1/2" NPT
5/8" Inv Flare
3/4" NPT
Exhaust Diffuser
Outlet
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
3/4" NPT
3/8" NPT
SET
110-130
110-130
110-130
160-175
160-175
160-175
Local: 1-478-474-8460
COST
62.62
50.31
30.00
60.32
60.32
145.39
4.46
40
CHECK VALVES
* All check valves ported for unloader.
Horizontal Inline
In-Tank
Vertical
< Load Genie
< Cold Start
Part #
TYPE
SIZE
COST
S1036
S1058
S1005
S1006
S1096
S1084
S1055
S1069
S1062
S1011
S1098
S1049
S1025
S1052
S1035
S1141
S1615
S1142
S1050
S1026
S1078
S1140
S1029
S1022
Load Genie
Load Genie
Cold Start
Cold Start
Horizontal Inline
Horizontal Inline
Horizontal Inline
Horizontal Inline
Horizontal Inline
Horizontal Inline
Horizontal Inline
Horizontal Inline
Vertical
Vertical
In-Tank
In-Tank
In-Tank
In-Tank
In-Tank
In-Tank
In-Tank
In-Tank
In-Tank
In-Tank
1/4" NPT x 3/8" Compression
Aux Unloader 1/8"
Aux Unloader 1/4"
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
1" NPT
1 1/4" NPT
1 1/2" NPT
2" NPT
1/2" NPT
3/4" NPT
1/2" NPT x 1/2" NPT
3/4" NPT x 3/4" NPT
1" NPT x 3/4" NPT
1" NPT x 1" NPT
1 1/4" NPT x 1 1/4" NPT
1 1/2" NPT x 3/4" NPT (fits Kellogg)
23.07
25.88
2.40
3.78
15.48
18.12
26.81
33.56
79.91
97.02
103.95
191.66
23.28
28.38
15.12
9.08
13.00
9.59
10.67
15.12
26.67
33.14
52.58
75.96
Call: 1-800-342-6016
Fax: 1-478-471-1095
41
PILOT and DISCHARGE VALVES
S1010 (130)
S1604 (175)
S1045
CDI
Conrader
with shutoff
S1617 (130)
S1618 (175)
S1613
Conrader
with toggle
RCB-HU
< Conrader
Discharge Unloader
Toggle & Felt Muffler
S1625
Conrader Discharge
Model - D
S1614
Part #
MODEL
RANGE
COST
S1614
Conrader Discharge Unloader w/ Toggle
115-135 PSI
54.96
S1625
Conrader Discharge Model - D
NA
36.24
S1010
CDI
110-130 PSI
36.90
S1604
CDI
160-175 PSI
36.90
S1045
Conrader w/ Shutoff
135-150 PSI
39.72
S1613
Conrader w/ Toggle
135-150 PSI
41.76
S1616
Conrader RCL-S HU
115-130 PSI
64.55
S1617
Conrader RCB HU (female)
115-130 PSI
29.61
S1618
Conrader RCB HU (female)
160-175 PSI
29.61
S1616
RCL-S
[email protected]
Local: 1-478-474-8460
42
PUMP REPAIR KITS
Gasket & Ring Sets, Inserts
Kits for Kellogg style pumps.
Pump
Part#
Cost
Gasket Set
w Oil Seal
Part#
Cost
Ring Set
Part#
Cost Rod
Insert
One Pair
321
332
335
352
452
462
R3540
22.05
R3520
36.00
R3560
8.85
R3541
27.00
R3521
45.60
R3561
8.85
R3542
22.05
R3522
28.50
R3562
8.85
R3543
57.60
R3523
37.50
R3563
23.63
R3544
29.25
R3524
57.00
R3564
8.85
R3545
72.00
R3525
75.00
R3565
23.63
UT50/EC5
UT100/EC10
R3546
16.65
R3526
18.00
R3566
8.85
R3547
22.05
R3527
36.00
R3567
8.85
*UT / EC kits shown above, are applicable to Saylor Beall 705 & 707 replacement pumps
352/462 Valve Group

Additional Valves
Valve Sets
Valve Spring & Disc Kits
Pages 44-46
Part#
Item
Cost
K4367
352 Complete Valve Set & Gaskets/Screws
363.56
K4368
462 Complete Valve Set & Gaskets/Screws
725.58
R3620
352/462 HP IN VALVE AY 38738
60.89
R3621
352/462 HP EX VALVE AY 38739
57.92
R3622
352/462 LP IN VALVE AY 38736
94.31
R3623
352/462 LP EX VALVE AY 38737
91.34
K4360
38621 GASKET, VALVE HP 352/462
3.15
K4361
38609 GASKET, VALVE LP 352/462
4.23
K4372
38602 GASKET, I/C FLANGE 352/462
2.54
K4363
38596 GASKET,PLATE 352/462
7.07
K4364
48778 GASKET,UL TOWER 352/462
1.53
K4366
38908 GASKET, CYL TO HEAD 352/462
9.52
K4365
SCREW SET (8 ), V HOLD DOWN 352/462
16.50
Call: 1-800-342-6016
Fax: 1-478-471-1095
43
PUMP REPAIR PARTS
Parts for Kellogg style pumps.
Part #
Part Description
Cost
Part #
Part Description
Cost
K4005
38599 AFTERCOOLER AY 352
168.30
K4142
76525 INTERCOOLER AY 332
117.00
K4010
38920 AFTERCOOLER AY 462
324.45
K4145
47940 INTERCOOLER AY 335
122.40
R3710
BEARING CONE 321, 325, 335
31.13
K4150
38598 INTERCOOLER AY 352, 462
325.35
R3711
BEARING CONE 331, 332, 452
31.50
K4155
48706 INTERCOOLER AY LH FFW 452
117.00
R3712
BEARING CONE 352, 462
62.45
K4160
48707 INTERCOOLER AY RH FFW 452
117.00
R3713
BEARING CUP 321, 332, 335, 452
15.90
K4165
38325 INTERCOOLER AY "A" 321
58.95
R3714
BEARING CUP 352, 462
28.97
K4170
38326 INTERCOOLER AY "B" 321
63.00
R3162
BEARING, NEEDLE 14319 1416
17.62
K4205
38235 PIN, WRIST HP 321
8.55
R3164
34.97
K4210
38240 PIN, WRIST HP 332
12.15
R3166
14.77
K4211
38241 PIN, WRIST LP 332
16.65
K4035
47971CAGE HP EX 332, 335, 452
5.40
K4215
47949 PIN, WRIST HP 335, 452
7.20
K4040
47928 CAGE LP EX 332, 335, 452
6.08
K4220
38895 PIN, WRIST HP 352, 462
19.80
K4045
47930 CAGE HP IN 332, 335, 452
5.40
K4225
38231 PIN, WRIST LP 321
8.55
K4055
47922 CAGE LP IN 332, 335, 452
6.08
K4230
47945 PIN, WRIST LP 335, 452
9.45
K4060
38787 CRANKSHAFT AY 332, 340
246.15
K4235
38896 PIN, WRIST LP 352, 462
36.23
K4065
83620 CRANKSHAFT AY 335
207.00
K4250
38236 PISTON HP 321
31.05
K4070
83622CRANKSHAFT AY 462
640.80
K4255
38238 PISTON HP 332
53.10
K4075
515.25
K4260
47948 PISTON HP 335, 452
26.10
K4080
247.95
K4265
39110 PISTON HP 352, 462
57.83
K4081
196.20
K4270
38237 PISTON LP 321
52.65
K4085
48870 CU AY 321, 332, 335, 452
29.25
K4275
38239 PISTON LP 332
66.38
K4095
17445 CYLINDER 321
131.40
K4280
47944 PISTON LP 335, 452
54.00
K4100
47925 CYLINDER 335, 452
154.80
K4285
39111 PISTON LP 352, 462
144.90
K4105
17119 CYLINDER 352, 462
476.10
K4295
45159 PLATE, CYL HEAD 352, 462
122.85
K4120
48004 FLYWHEEL 335
159.75
K4300
17274 RING, OIL FEEDER 321, 335
7.43
K4121
31010 FLYWHEEL 332, 452
232.20
K4305
17757 RING, OIL FEEDER 332
8.55
K4122
38593 FLYWHEEL 352, 462
991.13
K4310
85.95
K4123
38340 FLYWHEEL 321
141.30
K4315
8.10
K4125
47926 HEAD,CYL 335
112.95
K4320
99.00
K4130
38595 HEAD,CYL 352, 462
392.40
K4325
48284 ROD AY W BRG & INS 452 LP / HP
54.00
K4135
77688 HEAD,CYL LH FFW 452
112.95
K4340
117.90
K4140
77687 HEAD,CYL RH FFW 452
112.95
K4345
38270 ROD AY W BRG & INS 321 LP, 335 LP / HP
54.00
K4350
90.45
Many other parts are available.
Oil Sight Glass
High Temp Gaskets
K4374
K4372
K4370
Part #
Gasket
COST
K4370
K4372
K4374
48337 High Temp Exhaust Manifold Gasket 452
38602 High Temp Flange Gasket 462
38602 High Temp Exhaust Flange Gasket 462
2.34
2.54
3.84
Part #
TYPE
SIZE
COST
P0005
threaded
1/2" NPT
6.68
P0010
threaded
3/4" NPT
7.62
P1140
threaded
1" NPT
10.34
P0020
press-in
7/8" OD
5.50
P1120
press-in
1 1/4" OD
9.90
R4005
flange
1.75"x2.94"
11.63
R4004
threaded
3/4" NPS
3.90
*R4005 fits Curtis ES30 & 50, E71 & E15.
For Non Pressurized Crankcase
(For Rotary Screw Oil Sights, See Page 47)
*R4004 fits Curtis ES10 & 20 & E23.
[email protected]
Local: 1-478-474-8460
44
REPLACEMENT VALVE SETS
Includes valve
seals, cap gaskets
and / or O-rings
Part #
MODEL
COST
R3148
Kellogg 335 or 332
85.50
R3149
Kellogg 452
171.00
R3150
ACS-050 or EC-5
88.50
R3151
ACS-0100 or EC-10
172.50
R3152
Saylor-Beall 705
88.50
R3153
Saylor-Beall 707
172.50
R3040
Champion R15 old style VKR150
85.50
R3034
Champion R15 new style VKR15N
85.50
R3014
Champion R30 old style VKR300
171.00
R3037
Champion R30 new style VKR30N
171.00
R3157
Champion R40 Z614
869.03
R3155
Champion R70 Z614
1,595.57
Flywheel Bushings
Unbreakable Solid Steel !
Fits Kellogg Style 335 and 452 Pumps
Part#
TYPE
COST
R3407
R3408
335
452
46.50
46.50
Solid steel,
Hold Down
Ears will not
break. >>>>
Kellogg TVX Assembly Kit (complete)
For Kellogg 332, 335 & 452 head unloading.
For Dual Control or Gas Engine applications.
Hold Down Covers
LP
Part #: R3134
COST: 100.80
Part #
HP
TYPE COST
R3409
LP
36.00
R3410
HP
36.00
Kellogg Head Unloading Repair Kits & Parts Fits 332TVX, 335TVX and 452TVX pumps.
See Kellogg Replacement Parts Pages 42-46
Part #
Unloader Repair Kits
COST
R3135
332TVX-HUK
43.58
R3136
335TVX-HUK
R3137
452TVX-HUK
Part #
PARTS
Ref #
COST
43.58
R3138
HP FORK
47965
6.60
74.85
R3139
LP FORK
47963
6.60
R3140
O-RING
47962
0.66
R3141
PLUNGER
47961
9.75
R3142
NUT
47550
0.59
R3143
SPRING
47997
1.13
R3147
HP COPPER SEAL (valve)
47938
2.33
R3146
LP COPPER SEAL (valve)
47937
2.33
R3145
HP O-RING (hold down)
47931
1.20
R3144
LP O-RING (hold down)
47933
1.20
Call: 1-800-342-6016
Fax: 1-478-471-1095
45
REPLACEMENT VALVES
Quincy
Wayne
R3022
R3036
R3041
R3046
Champion
MAKE
Ref #
TYPE
COST
R3050
Kellogg
48141
LP-EX
22.50
R3043
Kellogg
47935
LP-IN
22.50
R3020
Kellogg
47936
HP-EX
21.00
R3015
Kellogg
50681
HP-IN
21.00
R3046
Wayne
AH15-1308
1 1/2" OD
36.00
R3036
Wayne
AH15-1305
1 1/8" OD
36.00
R3041
Wayne
AH15-1298
1 1/4" OD
43.50
R3030
Saylor Beall
4267
LP-IN
19.50
R3130
Saylor Beall
4265
HP-IN
19.50
R3027
4266
LP & HP EX
19.50
050 / 100-15
LP IN
19.50
050 / 100-53
HP IN
19.50
050 / 100-65
LP & HP EX
19.50
R3022
Saylor Beall
ACS & EC
Industrial Air
Saylor Beall Copy
ACS & EC
Industrial Air
Saylor Beall Copy
ACS & EC
Industrial Air
Saylor Beall Copy
Quincy
8133
EX
31.50
R3018
Quincy
6540X
IN
31.50
R3051
Champion
Z113
HP IN (old style)
21.00
R3021
Champion
Z5117
HP IN (new style)
21.00
R3072
Champion
Z115
HP EX
21.00
R3019
Champion
Z813
LP EX
22.50
R3044
Champion
Z812
LP IN
22.50
R3054
Champion
Z116
LP 1-stage
22.50
R3130
R3030
R3027
R3130
352/462 Kellogg Valve
Group Located on page 42
[email protected]
R3018
Part #
R3030
Saylor- Beall &
Industrial Air
Kellogg
R3027
All Aluminum Beltguard Aftercoolers
Improved Design, Higher Efficiency - Page 17
Local: 1-478-474-8460
46
REPLACEMENT PARTS & KITS
Unloader Valves
Unloader Valves
R3076
Part #
TYPE
COST
R3076
R3077
R3090
UNLOADER FITS KELLOGG-CAMPBELL HAUSFIELD - SAYLOR BEALL
UNLOADER- METRIC - FITS EC AND SAYLOR BEALL CLONES
UNLOADER - FITS WAYNE
10.43
10.43
55.65
R3077
R3090
Saylor- Beall Replacement
Sight Glass Flange
Champion Adapters
Part #
Description
COST
R3221
crankcase sight glass flange
22.58
Centrifugal Release
Valve Repair Kit
INTAKE ADAPTER TO 1” NPT
Part # : R3048
COST : 9.00 ea.
R3221
Oil Pump & Unloader
Repair Kit
NEW STYLE CYLINDER TO
OLD STYLE VALVE
Part # : R3057
COST : 11.85 ea.
( Kellogg )
R3047 kit
R3087 kit
( LeROI )
Part #
Description
COST
R3047
Fits 462, 331, 321, and 325
34.73
R3087
Fits LeROI and Wayne 100 - 990.
Includes oil pump vanes. Complete Kit.
55.73
Valve Repair Kits
Part #
Ref #
COST
R3055
R3035
R3042
R3025
R3091
R3092
R3093
R3094
18915 (fits 211)
45678 (fits 325)
18868 (fits 321)
18873 (fits 331)
Fits EC5-705-UT50
Fits 332-335
Fits EC10-707-UT100
Fits 452
16.50
30.75
29.25
30.75
31.73
33.23
61.35
61.35
KELLOGG 352 & 462
REPLACEMENT PARTS
VALVE SEATS & RETAINERS
Kellogg 321, 331, 351 & 451 parts
R3013
R3032
R3053
R3052
3/4" Compression Nut
For R15 & R30 Intercooler Tubes
Part # : R3095
COST : 7.00 ea.
R3023
R3029
R3012
R3026
Part #
Ref #
TYPE
COST
R3032
R3053
R3052
R3026
12526
12529
12524
12528
sm. seat
lg. seat
sm. retainer
lg. retainer
16.50
20.40
18.00
18.00
Call: 1-800-342-6016
Made In
The USA
Part #
Ref #
TYPE
COST
R3013
R3023
R3012
R3029
45211
45163
45156
77721
pin bushing
unloader plunger
piston unloader
unloader fork
14.93
14.85
14.93
18.24
Fax: 1-478-471-1095
47
Separator & Heaters
Oil Sight Glass
Designed for Rotary
Screw Applications up to
300 PSI
Part #
TYPE
SIZE
COST
P0005
threaded
1/2" NPT
6.68
P0010
threaded
3/4" NPT
7.62
P0011
threaded
1" NPT
13.64
P0012
threaded
1 1/4" NPT
21.44
P0013
threaded
1 1/2" NPT
30.20
P0014
threaded
2" NPT
39.04
Part #
T1026
T1028
T1035
Nylon 12 Tubing
NYLON TUBING
SIZE LENGTH
1/4"
100'
5/16"
100'
3/8"
100'
Rotary Screw
Control Line Tubing
240 PSI WP -60°F to +200°F
Cast-Iron Centrifugal Separator
Part #
S3001
S3002
S3003
S3004
S3005
S3006
MAX. CFM
@ 100 PSI
Weight lbs.
155
345
620
945
1400
25
44
47
89
90
1"
1 1/2"
2"
2 1/2"
3"
DRAIN REPAIR KIT- FITS ALL ABOVE
BLOCK HEATERS
Part#
W4950
W4951
W4952
W4953
W4955
W4956
NPT SIZE
(female)
Model
24100
24150
24250
24500
1153
1160
Type
Pad
Pad
Pad
Pad
Magnetic
Magnetic
COST
95.96
130.52
160.27
COST
• Made with Stainless Steel Valve
• Float Auto Drain
• Liquid Discharge Capacity:
625 lbs./hour @ 100 PSI
• Quality-built by Wright-Austin
523.03
907.42
1,018.61
1,488.11
1,449.67
249.18
See also Cast Aluminum Centrifugal Separators Page 11
Made In The USA
Watts Heat Area
100
4"x5"
150
4"x5"
250
4"x5"
500 5.5"x8.5"
200
8 sq."
300
20 sq."
COST
31.20
36.40
84.86
99.41
51.51
82.49
Block Heaters Reduce or Eliminate Nuisance
Condensates in Compressor Crankcase.
Reduce Hard Starts in Cold Weather.
• Pad Heaters used on Compressors, Cars , Trucks, Tractors
• Used as Oil Pan or Block Heaters
• Pads are Acid Resistant / Silicone Covered / Pliable
• Magnetic Heaters used on Compressors, Engine Blocks
• Including Small Engines, Manifolds, Controls, Hydraulics
• Instantly mounts to Iron or Steel surfaces
[email protected]
All Models are 120 Volt AC 60HZ
Local: 1-478-474-8460
48
ROBUSCHI PUMPS
Robox
Screw Compressors
Positive Discplacement Blowers
Vacuum Pumps
Centrifugal Pumps
APPLICATIONS
Combustion air
Food industry
Building sites
Paper industry
Cement factories
Thermo-eletric power stations
Chemicals and petrolchemicals
Tanning
Depuration
Detergents
Desalination plants
Pharmaceuticals
Wood
Vacuum plants - evaporation
Mining
Nautical
Hospitals
Plastics
Industrial cleaning
Sugar industry
Textiles
Pneumatic transport
Water treatment
Glass industry
Call: 1-800-342-6016
Robox packaged units are available in 15 through
400 HP models. CFM ratings from 140 to 10,400.
Quite Enclosure ratings range from 70 to 82 dB.
Pressure or Vacuum configurations.
Compact Design - Easy Maintenance Access
Air Injection
Vacuum Blower
RSW Oil Free
Screw Compressor
Centrifugal Pump
Positive Displacement
Blower
Fax: 1-478-471-1095
49
Mufflers
AIR MUFFLERS
Made In
The USA
Reduces excessive noise wherever
high pressure air is discharged.
Standard Mufflers are M series. 125 PSI
Relief Mufflers are X series. 175 PSI
Relief Mufflers are recommended
for Desiccant Dryer Applications
or where particulate matter in air
stream may potentially clog the
muffler element.
Relief Muffler
Part#
S4000
S4001
S4002
S4003
S4004
S4005
S4006
S4007
S4008
S4009
S4025
S4026
S4027
S4028
S4029
MODEL
M01
M02
M00
M05
M07
M10
M12
M15
M20
M30
X10
X12
X15
X20
X30
NPT SIZE
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
3"
1"
1 1/4"
1 1/2"
2"
3"
WIDTH
1-7/8"
1-7/8"
2-5/8"
3-1/8"
3-3/8"
3-7/8"
3-7/8"
5-1/4"
5-1/4"
7"
3-7/8"
3-7/8"
5-1/4"
5-1/4"
7"
LENGTH
3-1/8"
4-3/8"
5-1/8"
6"
7-1/4"
8-3/4"
8-3/4"
13-1/2"
18-7/8"
22-7/8"
8-3/4"
8-3/4"
13-1/2"
18-7/8"
22-7/8"
Standard Mufflers
WEIGHT
0.2
0.25
0.5
0.75
1
1.3
1.35
3.2
4.1
12.7
1.68
1.77
3.63
4.6
14.86
FLOW CF
44
84
192
256
544
800
1360
2080
3200
7200
800
1360
2080
3200
7200
COST
18.48
20.52
23.97
26.52
31.62
36.84
39.27
66.81
84.42
214.72
54.69
58.53
91.41
104.19
279.55
Bronze Blow Down Mufflers
Part #
S4015
S4016
S4017
S4018
NPT SIZE
1/8"
1/4"
3/8"
1/2"
COST
10.47
10.47
14.65
15.70
Useful for
Air Tools
Blow Down Valves
All in One Valves
*Prolonged exposure to noise exceeding 85 decibels may result in permanent hearing loss.
[email protected]
Local: 1-478-474-8460
50
AIR FILTERS
Air Filter Elements
#10
#19P
#14 &127
#4
#34P
#31P
#6
#25
Air Filter Elements
#231P
Part #
ELEMENT
TYPE
HEIGHT
ID-OD
COST
S1162
#4
paper
1"
2-1/4" OD
5.16
S1181
#6
paper
1-3/8"
3" OD
5.27
S1182
#10
paper
1-3/8"
4" OD
S1076
#14
paper
2 5/16"
3" - 4-3/8"
7.22
7.78
S1075
#127
paper
2"
3" - 4-3/8"
8.26
S1183
#15
polyester
2 5/16"
3" - 4-3/8"
9.93
S1014
#18P
paper
4 3/4"
3" - 4-3/8"
S1027
#19P
polyester
4 3/4"
3" - 4-3/8"
14.72
19.54
S1019
#25
polyester
4"
3 5/8" - 5-7/8"
21.18
S2200
#31P
polyester
4-3/4"
3 5/8" - 5-3/4"
24.26
S2205
#231P
polyester
9-1/2"
3 5/8" - 5-3/4"
47.49
S2210
#34P
paper
4-13/16"
4-3/4" - 7-7/8"
40.04
S2215
#234P
paper
9-5/8"
4-3/4" - 7-7/8"
48.05
S2220
#274P
paper
9-5/8"
8" - 11-3/4"
*Element numbers ending with a "P" include an outer prefilter.
Air Inlet Filter Assembly
#234P
#274P
82.95
• Element included
Air Inlet Filters
Part #
NPT
ELEMENT
COST
S1106
S1132
S1180
S1184
S1112
S1115
S1077
S1161
S1060
S1097
1/4"
3/8"
1/2"
1/2"
1/2"
3/4"
1"
1"
1 1/4"
1 1/2"
#4
#4
#6
#10
#14
#14
#14
#19
#19
#19
12.49
12.49
15.05
22.83
19.78
17.88
18.69
45.24
40.65
41.49
Call: 1-800-342-6016
#14 Assembly
#19 Assembly
#4 & 6 Assembly
#10 Assembly
Champion 1"
intake adapter.
See Page 42
Fax: 1-478-471-1095
51
Separators - Oil Filters
We offer an extensive line of Economical, Quality Replacement
Separators, Oil Filters and Air Filters.
Your resource for Rotary Screw, Rotary Vane, Scroll, and
Reciprocating compressor servicing supplies.
* Call, Fax or Email your part numbers for pricing and availability.
*Lubricants are on page 53
Silicone Rubber Donuts
Flexible CouplerAssembly
These are the Very Best Red Silicone
Rubber Donuts used in the flexible
compression pipe coupler. Used on
Rotary Screw Compressors.
Part #
P1301
P1302
P1303
P1304
P1305
P1306
P1307
P1308
P1309
* Si d f
Pipe Size
I.D. of Donut
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
3 1/2"
4"
h d l 40 t d d
1.050"
1.315"
1.660"
1.900"
2.375"
2.875"
3.500"
4.000"
4.500"
t l i
* Coupler Assembly
Includes One Set of
Black Buna Donut Seals
COST
33.81
39.27
43.89
48.93
55.86
66.96
67.56
87.72
119.28
[email protected]
Match nside
< Diameter >
Part #
Pipe Size
COST
P1419
P1420
P1425
P1430
P1435
P1440
P1450
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
109.20
126.75
134.55
128.70
191.10
224.25
234.00
Local: 1-478-474-8460
52
Oil Equivalents
ACS carries an extensive
line of lubricants for every
aspect of your compressed
air system. If you don't see
your oil below, call us and
we'll start a search for you.
TYPES OF LUBRICANT
Pure Synthetics
PAOs
Diesters
Synthetic Blends
Polyglycols
Torque Fluids
Amokon 68 ................................. TM 20
Anderol 3046 .............................. PAO 2000
Anderol 497 ................................ S 2000
Anderol 500 ................................ S 3000
Anderol 750 ................................ S 4000
CETUS PAO 46 .......................... PAO 2000
ChemLube 230 ........................... S 2000
ChemLube 501 ........................... S 3000
MPO-20 ...................................... TM 20
ChemLube 751 ........................... S 4000
Palasyn 45 .................................. PAO 2000
Coolant 32 .................................. Lube 32
Pallube 32................................... Lube 32
Sigma 8000 S-460 ...................... PAO 2000
Corena/Comptella 46.................. TM 20
ParaFilm 46 ................................ PSL 200
SRF 1/4000 ................................ PSL 200
Corena/Comptella 68.................. TM 20
Pennzcom S-100 ........................ S 3000
SSR Ultra Coolant ...................... MAX Coolant
CP 4100-150 .............................. S 4000
Pennzcom S-150 ........................ S 4000
Sullube 32................................... Lube 32
CP 4100-68 ................................ S 2000
Pennzcom S-68 .......................... S 2000
Sullube 60................................... MAX Coolant
CS 200........................................ S 2000
Quin-Cip-68 ................................ TM 20
Summa-20 .................................. S 2000
CS 300........................................ S 3000
Quin-Syn..................................... PAO 2000
Summa-Recip ............................. S 3000
CS 400........................................ S 4000
Quin-Syn 4.................................. PSL 200
Syn-Flo 80-XP ............................ PAO 2000
DTE Heavy Medium ................... TM 20
Rando Oil 46............................... TM 20
Syn-Flo 90 .................................. S 3000
DTE Medium............................... TM 20
Rando Oil 68............................... TM 20
Syn-Star DE 100......................... S 3000
GA-4K ......................................... PSL 200
Rarus 425 ................................... TM 20
Syn-Star DE 68........................... S 2000
GA-8K ......................................... PAO 2000
Rarus 826 ................................... S 2000
Synesstic 100 ............................. S 3000
IR SL-200 ................................... TM 20
Rarus 827 ................................... S 3000
Synesstic 150 ............................. S 4000
IR XL-700 ................................... S 3000
Rarus 829 ................................... S 4000
Synesstic 68 ............................... S 2000
IR XL-740 HT.............................. S 4000
Rarus SHC 1025 ........................ PAO 2000
SynFilm 46.................................. PAO 2000
KLC-20 ....................................... TM 20
Regal R&O 46 ............................ TM 20
SynthoLube SL 100 .................... S 3000
KSL 219 ...................................... S 3000
Regal R&O 68 ............................ TM 20
SynthoLube SL 150 .................... S 4000
KSL 220 ...................................... S 2000
Roto-Inject Fluid ......................... TM 20
SynthoLube SL 68 ...................... S 2000
KSL 222 ...................................... S 4000
Royco 4068 ................................ S 2000
Teresstic 46 ................................ TM 20
KSL 720 ...................................... PAO 2000
Royco 4100 ................................ S 3000
Teresstic 68 ................................ TM 20
L.E. 6202 .................................... TM 20
Royco 4150 ................................ S 4000
UltraChem Coolant ..................... MAX Coolant
LLL-4-46 ..................................... PAO 2000
Royco 446 .................................. PAO 2000
Madrela P 100 ............................ S 3000
Sigma 8000 S-100 ...................... S 3000
Madrela P 150 ............................ S 4000
Sigma 8000 S-150 ...................... S 4000
Oil Level Safety Switch Adapter
S2121
•adapts oil safety switch to sight glass fitting
Oil safety switch
on pg. 73
S2120
1 1/4 press in adapter
Call: 1-800-342-6016
Part #
DESCRIPTION
COST
S2120
Oil safety switch to flange adapter (press-in) Fits
certain SaylorBeall, Champion & Kellogg pumps.
21.00
S2121
Flange / oil safety adapter assembly
For SaylorBeall and SaylorBeall copy pumps.
40.50
Fax: 1-478-471-1095
53
COMPRESSOR LUBRICANTS
ACS Lubricants are the best value available. From PAOs to Diesters, our oil consistently meets
or exceeds original manufacturer claims and requirements.
*Prices subject to market fluctuations.
Call for positive pricing.
Oil
Maxima-46
PAO 1000
PAO 2000
FG200
FG300
S 2000
S 3000
PSL 200
Lube 32
MAX Coolant
#1 - TM 10
#2 - TM 20
Oil
PAO 220
PAO 220
Oil
#3 - TM 30
#3 - TM 30
#3 - TM 30
#3 - TM 30
S 3000
Oil
Air Tool Oil
Air Tool Oil
Air Tool Oil
Air Tool Oil
Air Tool Oil
Air Tool Oil
Rotary Screw Lubricants
Description
5 Gallon Pail
Synthetic Polyolester 15Wt. (ISO 46)
U9067 146.53
Synthetic PAO 10Wt. (ISO 32)
U9064 109.20
U9016 110.08
Synthetic Foodgrade PAO 15Wt. (ISO 46)
U9075 102.54
Synthetic Foodgrade PAO 30Wt. (ISO 100)
U9080 102.54
Synthetic Diester 20Wt. (ISO 68)
U9020 135.18
Synthetic Diester 30 Wt. (ISO 100)
1 Gallon > U9062
32.59 U9013 157.80
Partial Synthetic with oxidation control agents 15 Wt. (ISO 46)
U9030 104.57
Polyglycol Ester 5W/20
U9032 123.77
Polyglycol Ester 10W/20
U9034 130.48
Petroleum10Wt. (ISO32) w/synthetic additives*
U9063 103.74
Petroleum 20 Wt. (ISO68) w/synthetic additives*
U9036 103.74
Reciprocating Lubricants
Description
5 Gallon Pail
1 Gallon > U9082 35.28 U9084 168.95
4 Gallon Case > U9081 141.12
Reciprocating Lubricants
Description
5 Gallon Pail
1 Quart > U9027 8.32 U9019 103.74
12 Quart Case > U9028 95.88
1 Gallon > U9014 23.29
4 Gallon Case > U9029 89.58
Synthetic Diester 30 Wt. (ISO 100)
1 Gallon > U9062 32.59 U9013 157.80
* Synthetic additives - inhibits the formation of carbon and varnish and provides superior thermal and oxidative stability.
Air Tool Oil
Description
Tool Lubrication
1 Pint > U9021 5.34
Tool Lubrication
20 Pint Case > U9022 61.49
Tool Lubrication
1 Quart > U9023 8.32
Tool Lubrication
12 Quart Case > U9024 95.88
Tool Lubrication
1 Gallon > U9025 23.29
Tool Lubrication
4 Gallon Case > U9026 89.58
55 Gallon Drum
U9017
879.56
U9018
U9012
U9031
U9033
U9035
1,157.64
1,359.36
868.81
1,092.89
1,152.11
55 Gallon Drum
U9086 1,659.95
55 Gallon Drum
U9011
810.82
U9012
1,359.36
ACS lubricants are formulated for the high temperature, non combustion conditions in air compressors.
Consequently, engine type motor oils should never be used in compressors, as carbon build up will damage
pump and valves. Non-detergent or synthetic 'engine motor oils' are not suitable in air compressors.
Oil Level Safety Switch
• Breaks coil voltage to magnetic starter in the event of
low oil level
Part # : S2101
• NEMA 1 enclosure
Pricing on Page 73
• Suitable for 115,230,460 volt control circuits
• Oil level safety switch adapter available (pg.52)
[email protected]
Separators, Oil Filters and Air Filters
See page 50
Maxima-46 Lubricant now available.
Extreme High Quality - 12,000 Hour Rated
Suitable as replacement for CompLube-10, IR's
Ultra Plus,Qunicy's Quin-Syn HP, Atlas Copco's
Roto-Extreme Duty Fluid.
Local: 1-478-474-8460
54
REQUEST FOR CREDIT APPROVAL
Photocopy this page.
For Commercial Accounts Only
Send Via Fax ,Email or by Mail
SEE TERMS & CONDITIONS - PAGE 51
REQUESTED CREDIT AMOUNT
$ _____________
NAME ____________________________
BILLING ADDRESS _________________
__________________________________
SHIPPING ADDRESS ________________
__________________________________
Phone Number _______________________
Extension ___________________________
Fax Number _________________________
Cell Number _________________________
Email _____________________________
TRADE REFERENCE NAME ________________________ PHONE _________________________________________
ACCOUNT NUMBER ______________________________ FAX ____________________________________________
IS APPLICANT SUBJECT TO SALES TAX? ______________ MY EXEMPTION NUMBER IS_______________________
*PLEASE ATTACH COPY OF TAX EXEMPTION CERTIFICATE
YEARS IN BUSINESS ? _____ YEARS AT PRESENT LOCATION ? _____ DUNN & BRADSTREET #_______________
Federal Employer Identification Number
*Please Include copy of W9 form.
(EIN) ____________________________________________
Obtain Form at this website: http://www.irs.gov/pub/irs-pdf/fw9.pdf
THIS SECTION IS TO BE COMPLETED BY PROPRIETORSHIPS OR PARTNERSHIPS:
NAME OF OWNER OR AUTHORIZED PERSONS WHO WILL BE RESPONSIBLE FOR PAYMENT OF ACCOUNT, TWO MINIMUM.
NAME:_________________________________________
ADDRESS: _____________________________________
PHONE: ___________ SS# ________________________
BANK (PERSONAL): _____________________________
POSITION OR TITLE: _____________________________
NAME: __________________________________________
ADDRESS: ______________________________________
PHONE: _____________ SS# ________________________
BANK (PERSONAL): _______________________________
POSITION OR TITLE: ______________________________
The undersigned applicant acknowledges that should credit be approved, the terms are NET 30, from date of invoice.
This Credit Application will be processed by D&B and / or by review of trade references supplied by applicant.
Please allow approximately one week to process this application.
"Net 30 Accounts" require a $250.00 minimum initial order. *Please include copy of Purchase Order with this application.
Applicant Signature : ________________________________________________ Date : _____________
$50 will be charged to
process credit application
with D&B.
Call: 1-800-342-6016
Air Compressor Sales
PO Box 26099
Macon, GA 31221
Fax: 478-471-1095
Phone: 478-474-8460
Email: [email protected]
Fax: 1-478-471-1095
Terms and Conditions
55
Terms :
•
Shortages or content shipping errors must be reported immediately.
(Corrections will not be allowed after 10 days from ship date.)
•
•
•
•
•
•
•
•
•
•
•
Actual Shipping weights vary due to crating or packaging materials as needed. This catalog displays approximate weights only.
MasterCard / Visa / American Express / Discover accepted. $10.00 minimum order on all credit card orders.
Open accounts are Net 30 Days. Commercial or Industrial Accounts Only.
Net 30 Accounts using a Credit Card to pay on account will be converted to Credit Card Status immediately.
Completed credit applications are required for all new Open accounts. See Credit Request Form on page 56.
Most Major Freight Lines are available upon request.
Products shown in this catalog are not guaranteed for a particular purpose and are limited to extent of the original manufacturer's warranty.
A signed tax exemption form is required to qualify for tax-exempt status.
Sorry, COD orders are not accepted.
Deducting charges from billing without prior arrangements with ACS shall involve a $25 reprocessing fee.
Any property sent to ACS for repair, holding, resell, or any other reason for a period exceeding 45 days, shall be considered abandoned property unless
otherwise agreed upon in writing by ACS. ACS shall dispose of abandoned property by any means it deems appropriate and no compensation will be
offered. ACS shall not be responsible for loss of this property.
It shall be the responsibility of the customer to record Serial Numbers and Model Numbers, to obtain and save some form of receipt or documentation from
their Carrier or ACS as the case may be, identifying said property and to communicate with ACS in a timely manner regarding their property.
ACS shall not be responsible for damaged, lost, misdirected, unlabeled or unidentified property transported via public or private carrier.
A packing slip shall accompany any shipment to ACS identifying the contents including Model and Serial Numbers if available and to state what repairs or
actions are requested. Packing slip must include contact information.
Product photos are reasonable representations of actual appearance, some minor variations may apply,
such as color, control enclosures and mounted positions.
•
•
•
•
• Call for positive pricing: Prices are subject to change without notice. Quotes are valid for 30 days.
*Though every effort is made to insure accuracy, due to rounding calculations, a 1 cent plus or minus margin of error
shall be considered acceptable and no adjustment will be applied.
• Freight shipments rates normally apply to commercial delivery with forklift at the location. Additional charges apply for Residential, Farms,
Construction Sites, Military Bases, Restricted Access, Delays, Inside Delivery, Liftgate Service, Appointments or other exceptions. Any additional freight
charges are the responsibility of the customer. For shipping estimates, please be sure to include all information and noted exceptions.
RETURN POLICY :

We are not responsible for duplicated orders.
• No returns for any reason after 30 days.
• Make request by email, fax or phone within 30 days from date of shipment.
After approval and issuance of RGA number, return to ACS freight prepaid.
When placing orders, use only ONE method:
A 25% restock fee shall apply.
Phone, Fax or Email. If you are resending a corrected order.
• Special order parts and used parts are not returnable.
• No Returns on Electrical parts.
Mark the PO "Do not duplicate."
WARRANTY FREIGHT POLICY :
• All replacement parts will be shipped FOB Macon, GA : FREIGHT COLLECT
• Parts returned to ACS at our request must be prepaid.
• Parts and / or units returned for repair must be freight prepaid,
whether covered by warranty or not.

Always inspect freight shipments
before signing for delivery.
[email protected]
Orders are normally shipped within 24 hours
'In The Order They Are Received' regardless
of requested ship method. High traffic volume
may cause a delay. Emergency Orders are
charged a $25 rush fee in addition to shipping
charges. We do not guarantee the delivery
performance of carriers.
Next Day or 2 day shipment requests must be
confirmed in writing on a PO, Fax or email.
Customer is responsible for shipping charges.
Local: 1-478-474-8460
56
INDUSTRIAL BLOWERS
POSITIVE DISPLACEMENT
Industrial Blowers & Vacuum Pumps
GD CycloBlower®
Helical Screw - DSL
Airflow to 6,700 cfm
Pressure to 20 psig
Vacuum to 17 “Hg
Wet Vacuum to 24 “Hg
Efficiency leader at higher pressure
Quiet, shock free compression
Clean air & gas delivery
Higher pressure & vacuum performance
GD HeliFlow®
Helical Tri-Lobe - DSL
Airflow to 3200 cfm
Pressure to 15 psig
Vacuum to 16 “Hg
Innovative & revolutionary PD blower design
Reduced noise by 4–7 dBA
Superior overhung load capacity
GD TriFlow®
Straight Tri-Lobe - DSL
Airflow to 700 cfm
Vacuum to 16 “Hg
Tri-Lobe impeller design for reduced noise
and pulsation
Advanced oil/air seals for reliable air delivery
Heavy-duty design for reduced downtime
GD DuroFlow®
Straight Lobe - DSL
Pressure to 15 psig
Vacuum to 16 “Hg
60+ years of proven results
Advanced oil/air seals for reliable air delivery
One piece rotor/shaft for increased durability
Call: 1-800-342-6016
Fax: 1-478-471-1095
57
INDUSTRIAL BLOWERS
POSITIVE DISPLACEMENT
Industrial Blowers & Vacuum Pumps
GD RBS
Straight Tri-Lobe - DSL
Pressure to 15 psig
Vacuum to 15 “Hg
Tri-lobe rotors offer quiet, efficient operation
Robust design for reliability and peace of mind
Optional flange mount for unsurpassed versatility
GD Sutorbilt®
Straight Lobe – Grease & DSL
Pressure to 20 psig
Vacuum to 16 “Hg
Wet Vacuum to 24 “Hg
75 years of proven results
Legend, 4500, 8000 & Quiet Series
Available with mechanical seals
GD IQ Package
Airflow to 1500 cfm
Pressure to 15 psig
Vacuum to 16 “Hg
Intelligent package engineered with innovation
and quality
Intensely Quiet design (as low as 60 dBA)
Integral AirSmart Controller provides
component monitoring
Backed by 150 years of proven results
Pneumatic Conveying
Chemical Processing
Wastewater Treatment
Carpet Cleaning
Power Generation
Dairy
Soil Remediation
Industrial Vacuum Systems
Dry Bulk Handling
Our product lines represent a proven history and reputation
for quality, dependability and performance.
[email protected]
Local: 1-478-474-8460
58
GARDNER DENVER
Electra Saver
182 to 2459cfm
50 - 500hp
Direct Drive
Low-Noise Enclosed or Un-Enclosed
AirSmart Controller
Gardner Denver Electra-Saver with Turn-Valve: The Industry Standard for
Variable Displacement Compressor Technology. With Energy Efficiency
models with sizes up to 500hp, the patented Turn-Valve provides electricity
cost savings when demand for compressed air fluctuates.
Electra Saver II
Gardner Denver Electra-Saver II. Workhorse Air Compressors from 15hp
all the way to 200hp. Electra-Saver II Compressors are Direct Drive with
oversized airends and bearings insuring energy savings and long life.
These compressors have premium package features such as stainless steel control
tubing, properly sized heat exchangers, direct drive gear-less compressor air end,
energy efficient motors, heavy duty inlet filter and optional enclosure.
Call: 1-800-342-6016
Fax: 1-478-471-1095
59
GARDNER DENVER
Gardner Denver VS Series
Designed from the ground up as a variable
speed solution the VS Series produces
the widest turndown range in the industry.
Coupled with the highest efficiency and
maximum reliability the VS Series provides
the most flexible solution in the market with
unprecedented features and controls.
Variable speed compressors can efficiently
and reliably handle the varying air demand
found in most plant air systems. These
compressors speed up and slow down
to match air supply to air demand as
it fluctuates. The right variable speed
compressor in the right application delivers
significant energy savings and a stable,
consistent air supply.
Unlimited Start/Stop Operation
15 to 335 HP
40 to 1553 CFM
Variable Speed, Direct Drive
64 – 79dBA
Wide turndown range
Air Smart Controller
When air is not needed VS Series
compressors stop running WITHOUT venting air
you’ve already paid to compress. Thus, no
power is used when no air is needed. When air
demand returns, these compressors “soft” start against
a pressure load. The result—energy consumption is kept
to an absolute minimum.
[email protected]
Local: 1-478-474-8460
60
GARDNER DENVER
Refrigerated Dryers
RNC Series
10 – 3000 SCFM
Global Air Treatment
All models use reliable refrigeration
compressors and environmentally
friendly refrigerants. Models through
RNC500 use proven reciprocating
refrigeration compressors. RNC600
through RNC3000 incorporate rugged
scroll compressors. You benefit from
long component life, and exceptional
around the-clock performance.
Desiccant Dryers
Moist filtered compressed air enters the pressurized
on-line desiccant filled drying Tower 1 through the
shiftmatic valve. Up-flow drying enables the desiccant
to strip the air stream of moisture. Clean, dry compressed
air exits through the shiftmatic valve to feed the
air system. Tower 2 (when in regeneration mode)
depressurizes to atmosphere through muffler when
valve opens. A portion of dry compressed air (purge
air) is diverted before exiting and passes through
off-line Tower 2 and exits at valve to desorb the
moisture from the desiccant. Once desorbed, valve
closes and Tower 2 is repressurized. At tower shift-over,
valve will open, causing the shiftmatic valve to shift.
Tower 2 will be placed on-line to dry the bed.
Operations will switch and Tower 1 will be regenerated.
Call: 1-800-342-6016
Fax: 1-478-471-1095
GARDNER DENVER
61
Reciprocating Piston Type Compressors
3
Select The Configuration
That Matches Your Application
With many models from which to choose in both single-stage
and two-stage compressors, we can match your exact needs.
These configurations, combined with a wide choice of options,
provide all the components for a customized installation. They
are available in both R-Series splash-lubricated and PL-Series
pressure-lubricated models.
Tank-Mounted Air Compressors
Available with horizontal or space-saving vertical tanks, twostage air compressors compress air to a higher pressure than
single-stage compressors.
Base-Mounted Air Compressors
Designed for installations where air tanks are remotely
located.
Duplex Air Compressors
For extra air delivery when you need it without wasted space.
Plus the flexibility of single operation, alternating between
compressors, or duplex operation to meet high air demand.
Gasoline or Diesel Engine Powered
Air Compressors
Truck and utility bed mounting design makes these
compressors ideal for fleet and field service. Ideal for
applications where electricity is not available.
Bare Compressor Pumps
Gardner Denver pumps provide dependable service for
industrial applications, OEM applications, and pump
replacement. The rugged pump design assures reliability and
long maintenance intervals.
Receivers
Receivers are ASME approved and include a pressure gauge,
pressure relief valve, drain valve and service valve.
[email protected]
Local: 1-478-474-8460
62
DOOSAN PORTABLES
Portable Compressors
Diesel Power
125 to 1600 CFM
Portable Power
Sales
Service
Rentals
Our 1600 CFM Portable features the
new IQ System ® which provides
Instrument Quality Air utilizing the
onboard aftercooler, particulate and
coalescing filters and condensate
disposal system.
T4i Emmisions Compliant
Light Towers
Light towers from Doosan Portable Power are built with the
professional-grade reliability and
durability you require. Our light
towers feature dependable engines,
a brighter, larger coverage area,
and protective reflector housings
with tempered glass.
Available in a variety of configurations, our Platinum Series®
compressors are designed to increase both productivity and
profits. With the high-capacity fuel tanks and plenty of options,
these powerful units offer the performance and serviceability
you need to complete the most difficult tasks with the greatest
efficiency.
The Doosan Portable Power
mobile generator range offers
a complete solution for all your
mobile power needs. These
units have been designed
for continuous use in harsh
environments.
Compaction Equipment
Call: 1-800-342-6016
Generators
Fax: 1-478-471-1095
ACS CNC Machining Services
Machine Shop Service
63
We Manufacture Replacement Parts, Obsolete and Prototype
Large or Small Jobs Accepted - Single Piece or Batch Lots
Custom Design Drawings Provided for Customer Approval
• CNC Machining • Turning • Drilling • Grinding • Milling • Prototypes • Repairs
State of the Art Machining Equipment
Rotary Screw Airend Rebuilding
[email protected]
Local: 1-478-474-8460
64
GAUGES
Panel Gauges
HOUR METER
HOUR METER
TEMPERATURE GAUGE
2 Hole Mount
S1163 & S1165
HOUR METER
3 Hole Mount
Flush Mount
10 ' SENSOR LEAD
1/2" MPT BULB FITTING
Choice of 2" or 2.5"
Fits 1.45" x .95" Opening
PRESSURE GAUGE
S2840 & S2845
Panel Mount
Liquid Filled
Fits 2" Opening
Fits 2" Opening
W4619 LCD Display
0-240 ° F S1169 Flange Mounted
Temperature Gauge
Choose correct AC or DC & Voltage range below.
Gauge Adapter Plate
* ALL PANEL GAUGES INCLUDE MOUNTING HARDWARE
Liquid Filled Gauges
2" OR 2.5"
I.D.
4.5"
Back Mount S2865 1/4"
Vacuum S2870 1/4"
S2855 & S2860 1/4"
Part #
Hour Meters / Temp Gauges
COST
W4605
W4610
W4615
W4617
W4618
W4619
S1165
S1169
S1264
S1265
S1163
HOUR METER-Rectangle Two Hole Mount 115-230V AC
HOUR METER-Round, Flush Mount 115-230V AC
HOUR METER-Round, Three Hole Mount 115-230V AC
HOUR METER-Round, Flush Mount 10-80V DC
HOUR METER-Rectangle Two Hole Mount 10-80V DC
HOUR METER-Rectangle Two Hole Mount 20-300V AC
2"TEMP GAUGE - 10' lead Panel Mount
2"TEMP GAUGE - 10' lead Flange Mount
Adapter Plate 2" Center I.D.
Adapter Plate 2.5" Center I.D.
2-1/2"TEMP GAUGE - 10' lead Panel Mount
33.76
33.76
33.76
33.76
33.76
40.50
77.46
74.25
13.88
13.88
84.96
Part #
S2840
S2845
S2850
S2855
S2860
S2865
S2870
Gauges
PRES GAUGE 2" Panel Mount
PRES GAUGE 2-1/2" Panel Mount
2.25"TEMP GAUGE - Rigid CBM
2.5"Liq-Fill 300 Pres Gauge LM
2.5"Liq-Fill 200 Pres Gauge LM
2.5"Liq-Fill 300 Pres Gauge CBM
2.5"Liq-Fill Vacuum Gauge LM
15.34
18.54
18.14
16.69
14.90
14.90
17.64
Temp Gauge - Rigid Stem
1/4" Thread
4" Stem
S2850
0-220° F Range
2.25" Face
SEE OUR STANDARD
GAUGE SELECTION ON
PAGE 36
CBM = Center Back Mount, LM = Lower Mount
Call: 1-800-342-6016
Fax: 1-478-471-1095
65
ALTERNATORS
ALTERNATORS
Alternators are used in control circuits to automatically
cycle between two compressors.
Used on Duplex systems.
PJR
*The 47 Series will replace the Furnas type control.
The ARA and PJR are electronic versions and require the base socket.
The CA2 is foot or enclosure mounted.
CA2
ARA
Socket
L1
L2
F
U
S
E
F
U
S
E
Represents wire connection
points. This diagram shows some
wires crossing the path of other
wires. These are NOT connection
points between wires.
Coil
O
L
47AB
CA2 Enclosure
Part #
W4350
W4351
W4352
W4353
W4360
W4361
W4380
W4381
W4385
W4365
W4366
W4368
W4367
MODEL
47AB10AF 120V
47AB10AD 200V
47AB10AG 230V
47AB10AH 460V
ARA-120-ACA 120V
ARA-240-ACA 240V
PJR110
110V
PJR 220
220V
SOCKET ARA/PJR
CA2-G7 120V
CA2-M7 208-240V
CA2-T7 460V
CA2 ENCLOSURE
[email protected]
COST
294.98
294.98
294.98
294.98
63.54
101.44
81.74
78.43
4.48
99.16
99.16
99.16
29.54
Starter 1

A
A
U
X
N.O.
C B
ALT
COIL
< PSW 1
< PSW 2
Set 5-10
PSI
Lower
Coil
O
L
Starter 2
A
U
X
N.O.
* Note, a (Normally Open) Auxillary
Contact switch must be added to each
existing starter for proper alternator
function (as shown in the above wiring
diagram). A qualified technician is
required for wiring and installlation.
Local: 1-478-474-8460
66
CONTACTORS and OVERLOADS
IEC CONTACTORS All Contactors Feature 120 Volt Coils.
Part #
W4300
W4300
W4300
W4301
W4301
W4301
W4303
W4302
W4300
W4305
W4304
W4301
W4305
W4305
W4302
W4306
W4306
W4303
W4307
W4306
W4304
W4308
W4307
W4305
W4311
W4308
W4306
W4311
W4311
W4307
W4312
W4311
W4308
CONTACTOR
IEC18D
IEC18D
IEC18D
IEC25D
IEC25D
IEC25D
IEC40DA
IEC32D
IEC18D
IEC50DA
IEC50DA
IEC25D
IEC65DA
IEC65DA
IEC32D
IEC80D
IEC80D
IEC40DA
IEC115D
IEC80D
IEC50DA
IEC150D
IEC115D
IEC65DA
IEC265F
IEC150D
IEC80D
IEC265F
IEC265F
IEC115D
IEC330F
IEC265F
IEC150D
W4315
W4316
NO/NC
NO/NC
W4320
W4325
W4330
NO
NC
NC/NO
HP
VOLT
USE OVERLOAD
5
208
LRD22
5
230
LRD21
5
460
LRD14
7.5
208
LRD32
7.5
230
LRD22
7.5
460
LRD16
10
208
LRD340
10
230
LRD32
10
460
LRD21
15
208
LRD365
15
230
LRD350
15
460
LRD22
20
208
LRD365
20
230
LRD365
20
460
LRD32
25
208
LRD3363
25
230
LRD3363
25
460
LRD340
30
208
LRD3365
30
230
LRD3365
30
460
LRD350
40
208
LRD4369
40
230
LRD4367
40
460
LRD365
50
208
LR9F5371
50
230
LRD4369
50
460
LRD3363
75
208
LR9F7375
75
230
LR9F5371
75
460
LRD3365
100
208
LR9F7375
100
230
LR9F7375
100
460
LRD4369
Auxiliary Contacts
Auxiliary Contact Switch D line.
Auxiliary Contact Switch F line.
Start - Stop Switch
Start Switch - 7/8" mount
Stop Switch - 7/8" mount
Start "and " Stop Switch
COST
147.66
147.66
147.66
161.52
161.52
161.52
221.49
176.40
147.66
261.18
233.16
161.52
261.18
261.18
176.40
284.49
284.49
221.49
448.14
284.49
233.16
651.54
448.14
261.18
968.46
651.54
284.49
968.46
968.46
448.14
1,333.17
968.46
651.54
IEC OVERLOADS
Part #
W4400
W4413
W4414
W4401
W4402
W4418
W4403
W4404
W4405
W4406
W4417
W4415
W4416
W4407
W4408
W4409
W4410
W4411
W4412
27.36
27.36
52.33
52.33
99.77
OVERLOAD
LRD10
LRD14
LRD16
LRD21
LRD22
LRD32
LRD332
LRD340
LRD350
LRD365
LRD3361
LRD3363
LRD3365
LRD4367
LRD4369
LR9F5369
LR9F5371
LR9F7375
LR9F7369
AMP RANGE
4-6
7-10
9-13
12-18
16-24
23-32
23-32
30-40
37-50
48-65
55-70
63-80
80-104
95-120
110-140
90-150
132-220
200-330
300-500
START - STOP SWITCH
CONTROL TRANSFORMERS
Part #
Model
W4511
W4512
PH100
E200
Part #
W4515
W4514
W4514
W4517
W4516
W4520
W4521
W4522
Fuse
ATMR1
ATMR2
ATMR2
ATMR4
ATMR5
GGC1.5
GGC3
GGC4
Part #
W4518
W4519
FB2
Fuse Block
PFK1
FB2
Secondary
Voltage
110/115/120
110/115/120
75.37
106.07
Order Qty
Order 2
Order 2
Order 2
Order 2
Order 2
Order 1
Order 1
Order 1
COST
15.17
15.17
15.17
15.17
15.17
1.35
1.31
1.72
Use With
Order Qty
COST
All Models
All Models
Order 1
Order 1
6.44
11.27
Primary Voltage
Range
VA 100
220-240 / 440-480
VA 200
220-240 / 440-480
Optional Accessories
For
Use With
Primary
VA100 at 480V
VA100 at 240V
Primary
VA200 at 480V
Primary
VA200 at 240V
Primary
VA250 at 208V
Primary
VA 100
Secondary
VA 200
Secondary
Secondary
VA 250
VA Rating
Primary
Secondary
PFK1
Call: 1-800-342-6016
Fax: 1-478-471-1095
COST
COST
70.89
70.89
70.89
70.89
70.89
82.20
129.72
129.72
129.72
129.72
130.89
130.89
130.89
525.51
525.51
359.10
359.10
383.10
794.85
Solenoid Valves
67
ROTARY SCREW PARTS
COIL
DIN
ASCO General Service Valves
Air, Inert Gas, Light Oil, Water
Brass Valve Body
Stainless Steel Core & Spring
Copper Coil
Includes DIN Connector
Part #
120 VOLT
Part #
240 VOLT
Part #
24 VAC
Model
SIZE NPT
FUNCTION
Connection
Type
MAX TEMP °F
W4815
W4816
W4817
8262H002
1/4"
2-way NC
Wire Leads
180
W4825
W4826
W4827
8262H261
1/4"
2-way NO
Wire Leads
180
W4850
W4852
W4854
WPSC8238T402
3/8"
2-way NC
DIN 11mm
195
W4840
W4842
W4844
WPSC8238U414
3/8"
2-way NO
DIN 11mm
195
W4870
W4872
W4874
WPSC8238T405
1/2"
2-way NC
DIN 11mm
195
W4860
W4862
W4864
WPSC8238U415
1/2"
2-way NO
DIN 11mm
195
W4880
W4882
W4884
WPSC8238T408
3/4"
2-way NC
DIN 11mm
195
W4890
W4892
W4894
WPSC8238T410
1"
2-way NC
DIN 11mm
195
W4831
W4833
W4835
8314H035
*1/4" (1/8")
3-way NC
Wire Leads
200
W4800
W4802
W4804
8314H053
*1/4"
3-way NO
Wire Leads
200
W4895
W4896
W4897
8320G192
**1/4"
3-way NO
Wire Leads
200
* 3-way NO valve features two 1/4" ports and vents through coil 1/8"npt port. **3-way NO valve features three1/4" ports.
120 V
W4901
W4904
W4926
W4930
W4907
W4910
W4913
W4916
W4925
W4920
240 V
W4902
W4905
W4927
W4931
W4908
W4911
W4915
W4917
W4925
W4920
24 VAC
W4903
W4906
W4928
W4932
W4909
W4912
W4914
W4919
W4925
W4920
Phase Monitor
TYPE
ZA34A
Z134A
238210
238610
Z614A
238610
430054
238610-1
Part #
W4390
Item
Replacement Coil
Replacement Coil
Replacement Coil
Replacement Coil
Replacement Coil
Replacement Coil
Replacement Coil
Replacement Coil
11 mm DIN Connector
18 mm DIN Connector
Model
Phase Monitor 460
DIN Type
18 mm
11 mm
Wire Leads
Wire Leads
11 mm
Wire Leads
11 mm
Wire Leads
MAX PSI
COIL TYPE
COST
185
275
175
175
230
175
175
175
205
175
235
238210
238610
Z614A
430054
430054
430054
430054
430054
238610
238610
238610-1
85.68
162.44
89.99
137.70
89.99
137.70
165.06
173.45
144.14
139.20
144.47
COST
22.73
47.90
45.36
74.54
41.06
85.62
22.22
63.40
3.60
3.78
COST
115.31
Made in the USA - UL listed
CE Compliant
Line Voltage :190 to 480 VAC 50/60 Hz
Control Voltage: 24-120-240 VAC
Simple Installation.
Opens Control Circuit When Fault is Detected.
Adjustable Parameters.
Protects 3 Phase Motors from Loss of Phase , Low Voltage,
High Voltage, Voltage Imbalance, Phase Reversal, Rapid Cycling
[email protected]
Local: 1-478-474-8460
68
BLAST EQUIPMENT
Blasting Accessories
Air Fed
Blast Hoods
EMPIRE
We offer a full line of
Blast Equipment and Supplies.
Part #
Item
Cost
Part #
Item
Cost
E2000
Hose Cplr Twist 1.5"od Q1A(3/4"id)
5.28
E2090
538122 Cool Tube
65.85
E2005
Nozzle Holder 1.5"odx1.25"FPT NH1A
4.84
E2100
538202 Nova Outer Lens 50ct pack
17.38
E2010
Hose Cplr Twist 1-7/8"od Q2A(1"id)
5.26
E2110
538212 Nova Tear Off Lens 50ct pack
21.11
E2015
Nozzle Holder 1-7/8"odx1.25"FPT NH2A
5.12
E2120
538222 Astro Outer Lens 50ct pack
15.31
E2030
Hose Cplr Twist 2-5/32"od Q3A(1.25"id)
7.92
E2130
538232 Astro Tear Off Lens 50ct pack
22.58
E2035
Nozzle Holder 2-5/32"odx1.25"FPT NH3A
7.12
E2140
538242 Nova Inner Lens 10ct pack
14.77
E2040
Pot Ftg Twist 1.25"FPT SB1A
5.88
E2150
538252 Astro Inner Lens 10ct pack
14.52
E2050
Pot Ftg Twist 1.50"FPT SB2A
18.34
E2225
Empire_ Blast Pot 350 W/680
3599.00
E2060
537802 Hood,Nova w 28" Cape
390.00
E2230
4273.00
E2070
537862 Hood Astro w 28" Cape
275.60
E2235
5878.00
E2080
538142 Radex Airline Filter-Complete
251.88
H8047
Blast Cabinet Gloves (pair)
47.70
E2215
BlastHose1/2"IDx1-1/16"OD per foot *
2.64
E2205
BlastHose1"IDx1-7/8"OD per foot *
4.65
E2200
BlastHose3/4"IDx1-1/2"OD per foot *
4.38
E2210
BlastHose1-1/4"IDx2-5/32"OD per foot *
5.33
* Blast Hose sold as 25' or 50' only.
Blasting Sand Available in 50 lb. Bags.
We Carry Replacement Nozzles
Ceramic and Tungsten
* Blast Hose sold as 25' or 50' only.
Glass Beads - 50lb. Bags
For Bead Blast Cabinets
Blasting Hoods (below) are not air supplied and are not OSHA listed.
Part #
BEAD SIZE
B010
008
COST
1
5+
34.16
31.05
Always use breathing protection against silica dust and use only in well ventilated areas.
Blast Cabinet
Gloves H8047
Call: 1-800-342-6016
Part #
DESCRIPTION
COST
H8047
Blast Cabinet Gloves 8" Standard
47.70
H8048
Blast Cabinet Gloves 8" Heavy Duty
56.25
H8049
Blast Cabinet Gloves 12" Heavy Duty
89.70
H8050
Helmet-Light Duty Hood
49.31
H8051
Helmet-Heavy Duty Hood
98.61
Fax: 1-478-471-1095
BLAST EQUIPMENT
SuperBlast Portables
69
®
Safe, Reliable
& Efficient
SuperBlast® Portables are
available in three sizes.
350 - 650 - 1050
Part #
E-Z Fill® bag breaker and screen (Pat. No.
4,557,825) automatically breaks and filters bags of
grit through a large, six-inch inlet.
ASME construction assures
vessel integrity.
SuperBlast’s slim design lets
you wheel it through narrow
doorways. There’s no side
piping to damage.
Item
Cost
E2225
3599.00
E2230
4273.00
E2235
5878.00
Blast Hose, Couplers,
Lens, Hoods, & Breathing
Filter located on Page 70
Low profile makes filling less
strenuous. Deep positioning of
the screen within the filling head
eliminates the need for separate,
height-raising, add-on screens.
Moisture separator prevents
freeze-up, improves grit flow.
A large access port (not shown)
provides easy access to the interior.
Compact, front-mounted
controls reduce the possibility
of damage.
Large piping maintains high
operating pressure.
Flexible air line simplifies
maintenance and minimizes
pressure drops caused by
multiple fittings.
Simplicity, safety, reliability and performance—
those were our design goals when we engineered
SuperBlast portables. Many years on tough jobs,
such as removing corrosion, preparing surfaces
for coating
and maintaining heavy equipment,
ALTERNATE PACKAGE
CONFIGURATIONS
have proved that SuperBlast portables deliver
exceptional value in the field.
A look at the callouts above will show you that
SuperBlast portables are made of the “right stuff.”
These rugged systems are the product of ingenuity
[email protected]
Tilt control improves
stability, makes blaster easier
to move and prevents flat
spots on tires.
The Sure-Flo® grit valve (Pat. No. 4,518,145)
delivers reliable and precise performance. The valve
is durable and can be easily serviced at low cost.
(See back page for details.)
and experience; they combine a host of standard
features designed to boost productivity and profits.
In addition, they can be ordered in a variety of
configurations, including your choice of pneumatic
or electric remote controls, a complete OSHA
package and a full line of accessories.
SuperBlast makes short work of big projects;
and small jobs are a snap. For the best blasting
results, nothing beats SuperBlast.
Local: 1-478-474-8460
70
Paving Tools
Paving Breakers
Paving Breaker Tools
Models
160 and 190
Diamond Cutting Blades
Part #
H7160
H7190
Part #
H7110
H7120
H7130
H7140
Part #
H7102
H7106
H7108
Chuck Size
Model #
1-1/8 to 1-1/4 x 6"
160
1-1/8 to 1-1/4 x 6"
190
Tool Type
Model #
Moil Point
1023
Narrow Chisel
1034
3" wide Chisel
1042
5" Asphalt Cutter
1046
Blade Type
Bore
Concrete
1" or 20 mm
1" or 20 mm
Asphalt
Asphalt & Concrete 1" or 20 mm
Call: 1-800-342-6016
Weight
68
91
Shank
1-1/4 x 6"
1-1/4 x 6"
1-1/4 x 6"
1-1/4 x 6"
Diameter
14"
14"
14"
BPM
1680
1350
CFM at 90 PSI
60-65
75-80
Inlet NPT
1/2 inch
3/4 inch
Thickness
.125 "
.125"
.125"
RPM
5500
5500
5500
USE
Wet / Dry
Wet / Dry
Wet / Dry
Fax: 1-478-471-1095
COST
949.17
1,004.27
COST
29.02
29.02
36.30
76.58
COST
65.79
103.12
168.99
71
Tank Drains
ACC Condensate Drain

No Electricty Required
Condensate Level View Port
Suitable for Hazardous Environments
Integrated Strainer
AMF Magnetic Float Drain
No Electricty Required
Ideal as Filter Drain
Serviceable Valve

AZL Zero Loss Drain
Zero Air Loss During Discharge Cycle
115 Volt Operation / NEMA 4
60 Gallon Per Hour Capacity
Integrated Strainer
Large 4.5 mm Orifice
Micro Switch Test Button
Remote Alarm Contacts

Part #
Model
Type
Max CFM
Max PSI
Inlet NPT
Outlet NPT
Cost
S8440
S8442
S8444
ACC
AMF
AZL
Float
Magnetic
Zero Loss
3500
700
3000
230
230
230
1/2"
1/2"
1/2"
1/2"
1/8"
1/2"
356.40
146.88
291.60
Additional Tank Drains
on page 73
[email protected]
Local: 1-478-474-8460
72
OPTIONS For Compressor Units on pgs. 74-81
Available Options:
• Beltguard Mounted Aftercoolers
• Special Electrical Enclosures
• TEFC or Explosion Proof Motors
• Special Voltages and Starter Configurations
• Custom Settings, Controllers
• Vibration Pads
• Dryers, Filters, Regulators, Coalescors
We Will Build To Your Specifications
Dual Control
Part #
HP
MODEL
COST
X8011
5
ACS & EC
87.50
X8013
5
K Series
87.50
X8012
10
ACS & EC
100.00
X8014
10
K Series
100.00
na
15 - 25
K Series
standard
Mounted Automatic Tank Drain
Mounted Beltguard Aftercoolers
Part #
TYPE
COST
X1071
Pneumatic
113.33
X1072
*Electronic
99.53
*The Electronic Drain is shipped loose as a kit with
fittings for field mounting in order to protect it
during shipment.
Aftercooler
Part #
X6034
X6031
X6017
X6049
HP
5
10
15 - 25
30
COST
383.34
439.70
747.76
864.76

Oil Level Safety Switch Option
H = Horizontal
V
Starters - Shipped loose with Unit
Loose starters are a specially discounted option
only with purchase of a compressor unit in
this catalog. (Contact us for pricing)
See Page 26 for Replacement Starters
Call: 1-800-342-6016
Tank Options
V = Vertical
Part #
X8045
X8043
X8044
X8041
X8042
Change Tank from
30 GAL HORZ TO 60 HORZ
80 GAL H or V TO 120 VERT
80 GAL H or V TO 120 HORZ
120 GAL HORZ TO 120 VERT
120 GAL HORZ TO 240 HORZ
Fax: 1-478-471-1095
COST
223.44
469.53
346.48
248.05
660.16
73
Drains-Low Oil Switch
AUTOMATIC TANK DRAIN
Condensate Handler
TM
DH50-0LAAA
Automatic Tank Drains remove
water and condensates that
collect in your compressor’s
tank, extending tank life.
Electronic
Electronic Tank Drain
Adjustable Timer Settings
115 Volt AC with Cord
1/4-1/2" rated 300 PSI
3/4-1" rated 175 PSI
1/4" to 1/2" Include Inlet Strainer
Max Temp 170°F
Max Pressure 170 PSI
Control Air 40-130 PSI
Inlet / Outlet 1/2" NPT
Ht 11" W 9.25"
Rust HandlerTM
RH50-0LAAA
Max Temp 170°F
Max Pressure 250 PSI
Control Air 40-130 PSI
Inlet / Outlet 1/2" NPT
Ht 11" W 9.25"
Additional Tank Drains
on page 71
Part #
S0910
S0920
S1071
S1072
S1015
S3150
S3151
S3152
S3153
S1107
MODEL
DH50-0LAAA
RH50-0LAAA
Kingston-620
Conrader WV1
ACS 1/4" NPT
ACS 3/8" NPT
ACS 1/2" NPT
ACS 3/4"NPT
ACS 1" NPT
Watts D11-04W
TYPE
Pneumatic
Pneumatic
Pneumatic
Pneumatic
Electronic
Electronic
Electronic
Electronic
Electronic
Float
COST
758.10
788.03
71.20
32.34
98.88
121.97
121.97
113.68
154.30
74.87
TANK DRAINS
Conrader WV1
1/8"
1/4"
Kingston 620
3/8"
Pet Cock Drains
OIL SAFETY SWITCH
Part #
Watts D11
Drip Leg Drain
1/2" NPT Inlet
Oil Level Safety
Switch
1" FPT
Suitable for 110
to 460 Volts.
Part #
DESCRIPTION
COST
S2101
(Loose) 1" NPT inlet,
NEMA-1 enclosure
191.54
X2101
P1460
NPT
COST
U1190
1/4"
3.82
U1191
1/8"
2.66
U1192
3/8"
5.06
Cable Drain (Pull Cable)
S1252
1/4"
9.23
Float activated
Cable Drain 1/4"
Champion Drain Repair Kit
BUCKET HIGH TANK DRAIN
(Mounted & Wired) 1" NPT
217.63
inlet, NEMA-1 enclosure
Float & Stem Assembly
19.25
Replacement
Float for Oil
Switch
[email protected]
Part #
Ref #
COST
Part #
SIZE
COST
S1008
Z5941
25.99
S1137
S1138
S1139
1/4" NPT
3/8" NPT
1/2" NPT
16.84
16.84
16.84
Local: 1-478-474-8460
74
Duplex-Simplex
Suitable for
HVAC/Climate Control
Fire Protection
and More !
Built-in back up by design
Standard Features:
• Splash Lubricated, Belt Driven Pumps
• ASME Coded Tank and Safety Valve
• Tank Pressure Gauge
• All Metal Beltguard meets OSHA standards
Duplex Units Include:
• Two Starters and Alternator Control
• Two Motors and Two Pumps
• Automatic Tank Drain
• Dual Pressure Switch Control
Simplex Units Include:
• One Pump and Motor
• Automatic Tank Drain
• Pressure Switch Control
• 3 Phase units include starter
Available Options:
Style A
Style B
• Beltguard Mounted Aftercoolers
• Special Electrical Enclosures
• TEFC or Explosion Proof Motors
• Special Voltages and Starter Configurations
• Low Range 30-40 PSI Pressure Switch
• Dryers, Filters, Regulators, Coalescors
We Will Build To Your Specifications
CFM ratings are combined on duplex values. CFM shown for 25 HP @175 PSI, 5-20 HP @ 100 PSI, and 3/4-2 HP @ 90 PSI.
5-25 HP models use two stage pumps capable of up to 175 PSI. The 0.75-2 HP models use single stage pumps.
Add 200 lbs. for gross ship weights on 10-25 HP models and 100 lbs. on 3/4-5 HP models.
Call: 1-800-342-6016
Fax: 1-478-471-1095
75
Duplex-Simplex
Part #
MODEL
HP
PHASE
VOLT
X8500
X8501
X8502
X8503
X8504
X8505
X8506
X8507
F6900
F6910
F6920
X8508
X8509
X8510
X8511
X8512
X8513
X8514
X8515
X8516
X8517
X8518
X8519
X8520
X8521
X8522
X8523
X8524
X8525
X8526
X8527
X8528
X8529
X8530
X8531
X8532
X8533
X8534
X8535
X8536
X8537
X8538
X8539
X8540
X8541
X8542
X8543
X8544
X8545
X8546
X8547
X8548
DUPLEX-K5H12D1-230
DUPLEX-K5H12D3-208
DUPLEX-K5H12D3-230
DUPLEX-K5H12D3-460
DUPLEX-K10H12D1-230
DUPLEX-K10H12D3-208
DUPLEX-K10H12D3-230
DUPLEX-K10H12D3-460
DUPLEX-RF15H24D3-208(GHT)
DUPLEX-K15H24D3-208(GHT)
DUPLEX-LCOB-075H6D1-115/230
DUPLEX-LCOB-075H6D3-208
DUPLEX-LCOB-100H6D1-115/230
DUPLEX-LCOB-150H61-115/230
DUPLEX-LCOB-150H63-208
SIMPLEX-LCOB-075H31-115/230
SIMPLEX-LCOB-075H33-208
5
5
5
5
10
10
10
10
15
15
15
15
15
15
20
20
20
25
25
25
0.75
0.75
0.75
0.75
1
1
1
1
1.5
1.5
1.5
1.5
2
2
2
2
0.75
0.75
0.75
0.75
1
1
1
1
1.5
1.5
1.5
1.5
2
2
2
2
1
3
3
3
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
230
208
230
460
230
208
230
460
208
230
460
208
230
460
208
230
460
208
230
460
115/230
208
230
460
115/230
208
230
460
115/230
208
230
460
115/230
208
230
460
115/230
208
230
460
115/230
208
230
460
115/230
208
230
460
230
208
230
460
TANK CFM L x W x H WEIGHT STYLE
120
120
120
120
120
120
120
120
240
240
240
240
240
240
240
240
240
240
240
240
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
40
40
40
40
80
80
80
80
90
90
90
124
124
124
164
164
164
163
163
163
6
6
6
6
8
8
8
8
12
12
12
12
16
16
16
16
3
3
3
3
4
4
4
4
6
6
6
6
8
8
8
8
76x29x57
76x29x57
76x29x57
76x29x57
76x50x57
76x50x57
76x50x57
76x50x57
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
89x78x78
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
52x22x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
42x20x40
1000
1000
1000
1000
2000
2000
2000
2000
2500
2500
2500
3350
3350
3350
3400
3400
3400
3600
3600
3600
425
425
425
425
430
430
430
430
440
440
440
440
450
450
450
450
250
250
250
250
260
260
260
260
270
270
270
270
285
285
285
285
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
COST
4,266.00
4,272.00
4,279.00
4,260.00
6,117.00
5,587.00
5,598.00
5,485.00
9,452.66
9,526.96
9,396.82
11,585.00
11,660.00
11,480.00
12,096.00
12,195.00
11,943.00
13,041.00
13,338.00
13,085.00
3,206.00
3,123.00
3,116.00
3,116.00
3,323.00
3,308.00
3,363.00
3,363.00
3,359.00
3,336.00
3,394.00
3,394.00
3,492.00
3,360.00
3,424.00
3,424.00
1,349.00
1,461.00
1,458.00
1,456.00
1,410.00
1,581.00
1,581.00
1,579.00
1,423.00
1,567.00
1,596.00
1,595.00
1,482.00
1,579.00
1,612.00
1,610.00
[email protected]
Local: 1-478-474-8460
76
TWO-STAGE ELECTRIC UNITS
15-25 HP Two Stage Units
RF15H12
Shown with Optional
Motor Starter
EC15H12
K25H12
RF15, EC15, K15-20-25 UNITS:
• Horizontal Tanks- ASME Coded
• ASME Coded Safety Valve
• Automatic Pressure Control Switch
• Metal Beltguard meets OSHA Standards
• 1" Ball Valve Tank Outlet
• Height: Approx. 66" (240 Gal = 72")
• Length: Approx. 69" (240 Gal = 85")
• Width: Approx. 33" (240 Gal = 39")
• ASME Coded Tanks
• Configurable as Package Unit Upgrade
• Options Available (Page 72)
• 240 Gal Horizontal Tank Available
• "B'" V-Belt Driven
• Dual Control on K Models
MOTOR RPM:
1750-1800 RPM on all units
K Units feature finned copper
intercooler tubes which
enhance cooling performance.
Call: 1-800-342-6016
Fax: 1-478-471-1095
77
15-25 HP Two Stage Units
Package Unit Option
With Starter Option
Basic Unit Option
Includes Motor Starter
Starter Mounted and Wired.
Starter not included.
Automatic Tank Drain
Belt Guard Mounted Aftercooler
MODEL
HP
RF15H123
RF15H123
RF15H123
EC15H123
EC15H123
EC15H123
K15H123
K15H123
K15H123
K20H123
K20H123
K20H123
K25H123
K25H123
K25H123
15
15
15
15
15
15
15
15
15
20
20
20
25
25
25
PHASE Voltage CFM
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
208
230
460
208
230
460
208
230
460
208
230
460
208
230
460
44
44
44
47
47
47
55
55
55
68
68
68
81.5
81.5
81.5
TANK
Wt lbs.
Part#
Basic
Part#
With Starter
Part#
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
120-H
1350
1350
1350
1362
1362
1362
1677
1677
1677
1724
1724
1724
1800
1800
1800
F6810
F6810
F6810
E1016
E1016
E1016
K2014
K2014
K2014
K2030
K2030
K2030
K2010
K2010
K2010
$3,241.69
$3,241.69
$3,241.69
$3,979.44
$3,979.44
$3,979.44
$4,617.82
$4,617.82
$4,617.82
$4,824.64
$4,824.64
$4,824.64
$5,359.87
$5,359.87
$5,359.87
F6820
F6830
F6840
E1520
E1521
E1522
K1516
K1517
K1518
K1522
K1523
K1524
K1528
K1529
K1530
$3,715.45
$3,752.59
$3,627.52
$4,380.71
$4,416.42
$4,296.16
$5,010.29
$5,048.86
$4,918.97
$5,277.55
$5,329.01
$5,255.69
$5,767.96
$5,922.29
$5,790.91
F6850
F6860
F6870
E1222
E1233
E1232
K2029
K2039
K2040
K2028
K2035
K2015
K2036
K2046
K2047
X8042
$660.16
Optional 240 Gallon Horizontal Tank Available on ALL Models. >>>
** CFM Rating based on 175 PSI
Package
Unit
$4,336.24
$4,373.39
$4,248.30
$5,031.89
$5,270.30
$4,947.34
$5,616.36
$5,654.94
$5,525.04
$5,883.62
$5,935.08
$5,861.76
$6,374.04
$6,528.36
$6,397.00
<<< 240 Gal. Option
Note: Add approximately 200 pounds for crated shipping weight.
* 240 Gallon Tank Option adds 315 lbs. weight.
Package Units Feature:
Mounted and wired
starter, the convenience
of an auto tank drain
and beltguard mounted
aftercooler which helps
remove condensate water.
Simplify Installation with our Stainless
Steel Flex Connectors on Page 35
Aftercooler
Protect Your Tank From Vibration Stress.
Vibration Isolater Pads Available on Page 34
Motor Starter Mounted and Wired
[email protected]
Local: 1-478-474-8460
78
7.5-10 HP Two Stage Units
K10V12
• Horizontal or Vertical Tank
• Dual "B'" V-Belt Driven
• Oversize Tanks Available
• ASME Tanks
• Ball Valve Tank Outlet
• Height: Approx. 69" as 80-V
(Horz. 120 Tank = 54")
• Length: Approx. 44" @ Vert. Top
(Horz 120.= 69")
• Width: Approx.29" (Horz.= 29")
MOTOR RPM:
1750-1800 RPM on all units
Super 7
Super 7
K7ZV8
All Units Feature
Cast Iron Pumps
Units shown with Optional
Motor Starter
Optional Dual Control Head
Unloading System Available
K Units feature finned copper
intercooler tubes which
enhance cooling performance.
EC10H12
Call: 1-800-342-6016
Fax: 1-478-471-1095
79
7.5-10 HP Two Stage Units
Basic Unit:
Shipped without
"required" motor starter.
Package Unit:
Includes: Motor Starter
Belt Guard Mounted Aftercooler.
With Starter:
Starters are mounted on all models.
MODEL
HP
PHASE
Voltage
CFM
TANK
K7ZV81
K7ZV83
K7ZV83
K7ZV83
K7V81
K7V83
K7V83
K7V83
EC10H121
EC10H123
EC10H123
EC10H123
K10V121
K10V123
K10V123
K10V123
K10H121
K10H123
K10H123
K10H123
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10
10
10
10
10
10
10
10
10
10
10
10
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
230
208
230
460
230
208
230
460
230
208
230
460
230
208
230
460
230
208
230
460
26
26
26
26
23
25.5
25.5
25.5
33.4
35
35
35
33.4
35
35
35
33.4
35
35
35
80-V
80-V
80-V
80-V
80-V
80-V
80-V
80-V
120-H
120-H
120-H
120-H
120-V
120-V
120-V
120-V
120-H
120-H
120-H
120-H
With
Part#
Starter
639
K1564 $2,205.00 K1560 $2,299.00 K1568
639
K1565 $2,205.00 K1561 $2,299.00 K1569
639
K1565 $2,205.00 K1562 $2,299.00 K1570
639
K1565 $2,205.00 K1563 $2,299.00 K1571
825
K1534 $2,421.76 K1538 $2,582.66 K1542
825
K1535 $2,248.94 K1539 $2,449.26 K1543
825
K1535 $2,248.94 K1540 $2,424.61 K1544
825
K1535 $2,248.94 K1541 $2,423.18 K1545
1090
E1015 $2,672.20 E1519 $2,954.10 E1231
1090
E1014 $2,362.06 E1516 $2,537.88 E1221
1090
E1014 $2,362.06 E1517 $2,542.98 E1230
1090
E1014 $2,362.06 E1518 $2,533.20 E1229
990
K1546 $3,038.27 K1548 $3,328.34 K1552
990
K1547 $2,714.08 K1549 $2,896.93 K1553
990
K1547 $2,714.08 K1550 $2,902.24 K1554
990
K1547 $2,714.08 K1551 $2,892.07 K1555
990
K2031 $2,915.42 K1512 $3,208.61 K2027
990
K2033 $2,591.22 K1513 $2,774.09 K2034
990
K2033 $2,591.22 K1514 $2,779.39 K2044
990
K2033 $2,591.22 K1515 $2,769.22 K2038
Wt lbs.
Part#
Basic
Part#
Package
Unit
$2,328.00
$2,328.00
$2,328.00
$2,328.00
$3,025.58
$2,892.19
$2,867.54
$2,866.12
$3,317.65
$2,999.35
$3,004.45
$2,994.67
$3,709.56
$3,376.87
$3,382.18
$3,372.00
$3,586.70
$3,254.02
$3,277.88
$3,249.16
H = Horizontal
Mounted and wired starter, the
convenience of an auto tank
drain and beltguard mounted
aftercooler which helps remove
condensate water.
V
V = Vertical
Aftercooler
Vibration Isolater Pads Available on Page 34
[email protected]
Local: 1-478-474-8460
80
TWO STAGE ELECTRIC
5 HP Two Stage Units
K Units feature finned copper intercooler
tubes which enhance cooling performance.
Both Units Feature
Cast Iron Cylinders
Optional Horizontal Version
K5V8
Units shown with Optional Motor Starter
EC5V8
and Optional Dual Control Head Unloading System
K5 AND EC5 UNITS:
• Horizontal or Vertical Tank
• Dual "B'" V-Belt Driven
• Oversize Tanks Available
• 80 Gallon ASME Coded Tank
• Manual Tank Drain - Auto Drain Optional
Call: 1-800-342-6016
• 3/4" Ball Valve Tank Outlet
• Height: Approx. 69" (Horz. Tank = 38")
• Length: Approx. 44" @ Vert. Top
(Horz.= 68")
• Width: Approx. 29" (Horz.= 24")
MOTOR RPM:
1750-1800 RPM
Fax: 1-478-471-1095
81
TWO STAGE ELECTRIC
5 HP Two Stage Units
MODEL
HP
PHASE
Voltage
CFM
EC5H8
EC5H8
EC5H8
EC5H8
EC5V8
EC5V8
EC5V8
EC5V8
K5H8
K5H8
K5H8
K5H8
K5V8
K5V8
K5V8
K5V8
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
230
208
230
460
230
208
230
460
230
208
230
460
230
208
230
460
16
17
17
17
16
17
17
17
16
17
17
17
16
17
17
17
V
Package Unit:
Includes: Motor Starter
Belt Guard Mounted Aftercooler.
With Starter:
Starters are mounted on
all models.
Basic Unit:
Shipped without
"required" motor starter.
TANK
Wt lbs.
Part#
Basic
Part#
With Starter
80-H
780
E1010 $1,611.65 E1500 $1,759.50
80-H
780
E1012 $1,663.45 E1502 $1,835.99
80-H
780
E1012 $1,663.45 E1503 $1,835.99
80-H
780
E1012 $1,663.45 E1504 $1,835.99
80-V
820
E1011 $1,575.42 E1501 $1,733.16
80-V
820
E1013 $1,627.24 E1505 $1,799.76
80-V
820
E1013 $1,627.24 E1506 $1,799.76
80-V
820
E1013 $1,627.24 E1507 $1,799.76
80-H
710
K2042 $1,689.38 K1500 $1,843.15
80-H
710
K2013 $1,736.28 K1502 $1,921.03
80-H
710
K2013 $1,736.28 K1503 $1,921.03
80-H
710
K2013 $1,736.28 K1504 $1,921.03
80-V
750
K2022 $1,651.72 K1501 $1,805.48
80-V
750
K2025 $1,703.93 K1505 $1,883.35
80-V
750
K2025 $1,703.93 K1506 $1,884.91
80-V
750
K2025 $1,703.93 K1507 $1,883.35
Part#
E1227
E1240
E1226
E1225
E1241
E1242
E1243
E1244
K2012
K2100
K2018
K2017
K2101
K2102
K2103
K2104
Package
Unit
$2,187.76
$2,264.23
$2,264.23
$2,264.23
$2,151.53
$2,228.02
$2,228.02
$2,228.02
$2,288.53
$2,366.41
$2,366.41
$2,366.41
$2,250.86
$2,328.73
$2,328.73
$2,328.73
Mounted and wired starter, the
convenience of an auto tank
drain and beltguard mounted
aftercooler which helps remove
condensate water.
H = Horizontal
Aftercooler
V = Vertical
Vibration Isolater Pads Available on Page 34.
[email protected]
Local: 1-478-474-8460
82
SUPER 7
Super 7
Oversized
Intake
K7ZV8
Cast Iron Pump
Finned Copper Intercooler
Disc Valves
Two Stage
Long Stroke
Two Cylinder
7.5 HP
26 CFM
175 PSI
1740
RPM
Motor
All Metal
Belt Guard
Roller Bearing
Crankshaft
Magnetic
Starter
18" Flywheel
Dual Belt Drive
Automatic
Pressure
Control Switch
Needle Bearing Upper
and Inserted Lower
Rod Bearings
80 Gallon
ASME Coded Tank
Super 7
76"x40.5"x25"
639 lbs.
Horizontal Available
Top Quality
Features
Built In
Centrifugal
Unloading System
3/4"
Ball Valve
*Additional Options
Available On Request
K1560 1Ø 230V
K1561 3Ø 208V
K1562 3Ø 230V
K1563 3Ø 460V
Easy Access
Drain Valve
See Pricing on Page 79.
Call: 1-800-342-6016
Fax: 1-478-471-1095
83
PORTABLE COMPRESSOR PARTS
I2015
S5005
S5006
I2020
S5001
Wheel for
22 Gal
Tank.
22 Gal
Handle
S5004
S5002
Part #
SIZE
CONFIG.
PSI
S5000
DESCRIPTION
S5003
TOP
PLATE
LxW
WEIGHT
COST
I2015
8 gal
twin
150
w/o wheels/non-code
36 x 18
24 x 9
55 lbs.
210.40
I2020
22 gal
horiz
150
w/o wheels/non-code
33 x 14
18 x 7.5
63 lbs.
192.49
Part #
Description
S5005
Wheel - For Twin 8 Tank. 10" x 2.75". Fits 5/8" Axle, Steel Hub
17.28
S5006
Wheel - 6" X 1.5" . Fits 1/2" Axle, Steel Hub
10.34
S5004
Wheel - For 22 Gal Tank. 10" x 1.75" , Fits 1/2" Axle , Plastic Hub (order 2 per tank)
7.80
S5003
Rubber Feet , Vibration Dampening. 1/4" mounting.1.5" x5/8", (Set of 4)
9.92
S5002
Handle for 22 Gal Tank
22.94
S5001
Handle Grips - For Twin 8 Tank , (Pair)
1.10
S5000
Axle, Steel Bar , For Twin 8 Tank. 5/8" x 4-3/4"
4.43
Safety Valves
All In One Valves
Check Valves
Page 39
Page 40
Pressure Switch
Page 25
TANK / COMPRESSOR MANIFOLDS
Page 38
Page 7
POLY-GROOVE PULLEYS
• Fits J-6 style
poly-groove belts
• 3/16" Key Slot with
set screw
*Male / Female
*Male / Male
*Schrader Valve Stem
Plain Manifold
*Features Built in 150 PSI Safety and Cutoff Valve.
Part #
TYPE
COST
S1622
Strader / Air chuck
12.58
S1620
Male / Male
12.58
S1621
Male / Female
12.58
S1013
Plain
5.71
[email protected]
Part #
I2100
I2101
I2102
I2105
I2103
I2104
SIZE
1 3/4" OD.
2" OD.
2 1/4" OD.
2-3/8" OD.
2 1/2" OD.
2" OD.
Filter/Regulator
BORE
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
Cross-section
representation of
J-6 Grooved Belt
9/16" width
COST
17.85
17.85
19.13
21.08
21.08
17.85

J-6 MULTI-GROOVE BELTS
Part #
SIZE
COST
I2050
I2051
I2052
I2053
I2054
I2055
I2056
I2057
I2058
I2059
I2060
I2061
I2062
I2063
I2064
I2065
I2066
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
13.71
Our Belts fit select models from
Cambell-Hausfeld, DeVilbiss,
Sears and other lines.
Local: 1-478-474-8460
84
PORTABLE COMPRESSORS
•
• Total Cast Iron Pump
• All Metal Beltguard
• Low Profile Tank
U1221
•
•
•
•
5540-H
U1015
U1217
•
•
•
•
2HP 115V 20 AMP Motor
Total Cast Iron Pump
All Metal Beltguard
Low Profile Tank
U2P2
UC1340GH
13HP
Total Cast Iron Pump
All Metal Beltguard
Low Profile - Dual Wheel
Part #
MODEL
TYPE
HP
TYPE
STAGE /
CYLINDER
CFM
TANK
WEIGHT
COST
U1221
UC5540H-UH30
Oil Lube
5.5
Honda
1 S / 2 Cyl
8.8 CFM @ 100 PSI
10 Gal Twin
225 lbs.
958.19
U1015
U2P2
Oil Lube
2
115V
1 S / 2 Cyl
7 CFM @ 100 PSI
10 Gal Twin
225 lbs.
997.76
U1217
UC1340GH
Oil Lube
13
Honda
2 S / 2 Cyl
19 CFM @ 175 PSI
10 Gal Twin
375 lbs.
1,676.82
Call: 1-800-342-6016
Fax: 1-478-471-1095
85
PORTABLE COMPRESSORS
///Unoair///
U1017
UH20
U1200
UC2008
Oil Lubricated
Cast Iron Cylinder
Part #
MODEL
HP
VOLT
CFM/PSI
STAGE /
CYLINDER
TYPE
TANK
WEIGHT
COST
U1200
UC2008
2
115
5 / 100
Single / 1 Cyl
LUBRICATED
3.4 Gal Pancake
48 lbs.
161.23
U1017
UH20
2
115 / 230
6 / 90
Single / 2 Cyl
LUBRICATED
20 Gal Horizontal
225 lbs.
546.47
[email protected]
Local: 1-478-474-8460
86
ENGINE COMPRESSORS
DIESEL
E1220
EC10DK
• Two Stage Pump-175PSI
• Keyed Ignition-Electric Start
• 12 Volt Charging System
• Metal Belt Guard
• ASME Coded Tank
• All Cast-Iron Constructed Pump
• Cast Iron Intercooler
• 9.8 HP Kohler Diesel Engine
• 12V Electric and Recoil Start
Part #
MODEL
HP
E1220
EC10DK
9.8
CFM @ 175
TANK SIZE
PSI
16
30 gal
LxWxH
Start
WEIGHT
COST
45x21x47
12V and Recoil
525 lbs.
4,055.77
*Battery Not Included
Protective Cover
Vinyl Cover Helps Protect Your Compressor
From Weather Exposure
Part #
ITEM
FOR
COST
E1216
COVER 14
10-14 HP on 30 Gallon Tank
77.35
E1217
COVER 20
18-20 HP on 60 Gallon Tank
99.93
Elastic Opening Includes Perimeter Eyelets
Call: 1-800-342-6016
Fax: 1-478-471-1095
87
ENGINE COMPRESSORS
Includes 12 Volt
Electric Starter and
Recoil Pull Start
Model EC14GK

Model K14GK
Also Available
E1218
K2068
EC14GK
K14GK
• ASME Coded Tank
• ASME Coded Tank
• All Cast-Iron Constructed Pump
• Cast-Iron Constructed Pump
• Cast Iron Intercooler
• 14 HP Kohler Gasoline Engine
• 14 HP Kohler Gasoline Engine
Part #
MODEL
HP
K2068
E1218
K14GK
EC14GK
14
14
CFM @ 175
TANK SIZE
PSI
24
30 gal
21
30 gal
LxWxH
Start
WEIGHT
COST
45x21x47
45x21x47
12 Volt
12 Volt
525 lbs.
525 lbs.
2,071.55
2,001.84
*Battery Not Included
[email protected]
Local: 1-478-474-8460
88
INDEX
15Ͳ25HPCompressors76
5HPCompresors80
7.5Ͳ10HPCompressors78
ActivatedAluminaMedia15
AirCooledAftercoolers16
AirFilterElements50
AirMufflers49
AircelCentrifugal11
AircelDesiccantDryers15
AircelFilters10
AircelOilͲWaterSeparators14
AircelRefrigeratedDryers12
AutoDrains73
BallValves35
Belts29
BlastEquipment68
BlockHeaters47
BlowDownMuffelrs49
Blowers48,56
Capacitors23
CentrifugalAircel11
CentrifugalCastIronSep47
CheckValves40
CoalescingFilters6,10
CoilHose18
CouplerPipeRotaryScrew51
Couplers20
CreditApplication54
DesiccantDryers15
DessiccantMedia15
DieselEngine30
DonutsSeals51
DoosanPortables62
Drains71,73
DuplexSimplexCompressors74
ElectricMotors22
ElectronicDrains73
Elements,Watts6
EmpireBlastEquipment70
Engines30
Filter/RegulatorCombo7
Filters,Aircel10
FlexConnectors35
GardnerDenverPistonCompressors61
GardnerDenverRotaryScrews58
GardnerDenverBlowers56
GasEngineUnits86
GasEngines30
Gauges36,64
HammerLockHoseFtgs68,18
Heaters,Block,Magnetic47
Hose18
Hosereels19
HourMeters64
IntakeFilters50
JackHammer70
KunkleSafetyValves38
LightTowers62
Lubricants53
Lubricators,Watts7
MachineShop63
MachineLevelMounts34
MaintenanceRecord21
MarmonTypeSeals51
Monitor,MotorProtection24
MotorguardFilter8
Motors,electric22
NanoWaterSeparators14
Oil53
PanelGauges64
PavingTools70
PipeLineFiltersWatts6
PopOffValves38
PortableSmallCompressors84
Portable,TowbehindCompressor62
PressureSwitches25
Pulleys28
PumpsChinook3
PumpsCurtisType3
PumpsEseries1
PumpsGrayLine5
PumpsKelloggType2
PumpsPowerex4
QixWatts9
QuickCouplers20
Reels19
RefrigeratedDryers12
Regulators,Watts7
ReliefMufflers49
RentalCompressors62
RobuschiBlowers48
RotaryScrewCompressors58
RubberHose18
SafetyValves38
Separators,OilͲWater14
SolenoidValves67
Starters26
Sticker,MaintenanceLog21
SchraderValve35
TankDrains71,73
Tanks32
TempGauge64
Terms&Conditions55
ToiletPaperFilter8
TwistlockCouplers20
VibrationIsolators,Pads34
WarrantyInfo33
WattsAirFilters6
WattsCoalescing6
WattsElements6
WattsLubricators7
WattsQIX8
WattsRegulators7
Questions, Research, Engineering Advice ?
Email us at: [email protected]
Call: 1-800-342-6016
Fax: 1-478-471-1095
ENGINE COMPRESSORS
20 HP
89
• 4 Cylinder-Cast-Iron Constructed Pump
• Steel Rods, Automotive Type Inserts
• Serviceable Spring and Disc Valves
• All Metal Heavy-Duty Belt Guard
• Keyed Ignition *(Electric Start)
• Head Unloading System
• 60 Gallon ASME Coded Tank
Our 20 HP
Compressor is
designed for high
air demands :
Sandblasting
Spray Rigs
Multiple Workers
K2075
K20GH
Part #
MODEL
HP
CFM @
175 PSI
TANK
SIZE
LxWxH
Start
WEIGHT
COST
K2075
**K20GH
20
44
60 gal
54x26x52
12 Volt
859 lbs.
3,949.10
Includes mounted 5 Gallon fuel tank.
*Battery not included. Starter wiring may be connected to existing 12 volt vehicle battery.
[email protected]
Protective Cover Available Page 86
Local: 1-478-474-8460
Air Compressor Sales
PO Box 26099
Macon, GA 31221
E1215
•Cast-Iron Constructed Pump
EC13GH
•Cast-Iron Intercooler
•Centrifugal Unloading
•Steel Rods, Automotive Type Inserts
•Serviceable Spring and Disc Valves
•All Metal Heavy-Duty Belt Guard
•Keyed Ignition *(Electric Start)
•Head Unloading System
Optional K series Pump K2078
Part #
MODEL
HP
CFM @ 175
PSI
TANK
SIZE
LxWxH
Start
WEIGHT
COST
E1215
EC13GH
13
21
30 gal
45x21x47
12V and Recoil
525 lbs.
2,244.20
K2078
K13GH
13
24
30 gal
45x21x47
12V and Recoil
525 lbs.
2,333.76
INDUSTRIAL CATALOG
www.aircompressorsales.com
1-800-342-6016

50 Years - Our Products

Transcription

Similar documents

KOHO - Hockey Giant

January 9013 PUMPTROL Commercial Pressure Switches Type F

January 9013 PUMPTROL Commercial Pressure Switches Type F

Alf Duncan Auction Catalogue Wednesday 10 February 2016 at