Wesco Aircraft Tooling Catalog (February2008)

Transcription

INSTALLATION TOOLING
We offer
SALES y Only the BEST PRODUCTS from the finest manufacturers
REPAIR y We can repair virtually any installation tool used in the Aerospace Industry
REPAIR PARTS y We stock a full line of repair parts available for immediate delivery
MAINTENANCE PLANS y Let us show you how you can alleviate any downtime by
utilizing our Factory Trained Technicians to maintain your Installation Equipment
COST SAVING LEASE AND RENTAL PROGRAMS
WESCO INSTALLATION TOOLING GROUP IS AN AUTHORIZED
STOCKING, REPAIR AND SERVICE CENTER FOR:
ATl Industries
AVK
Bristol Industries
Cherry Aerospace
Cleco
Cooper Power Tools
Crane Resistoflex
Deutsch Permaswage
Dotco
Dynabrade
Fairchild (Alcoa)
General Pneumatic
Hi-Shear (APT)
Huck (Alcoa)
Kato
Lok-Fast
MakitaTools
Monogram
Quackenbush
Reliable Tool Co. (RTC)
Shur-lok
United Air Tool (Jiffy)
We hope you find this
online catalog easier to use,
and more environmentally acceptable,
than the 2.5" thick, 5 lb book of the previous edition.
We plan to develop an intelligent search facility for
future editions, meanwhile please use the bookmarks
to the left (for help on the structure and the bookmark
system see following page.) Or you may wish to
search by entering the tool part number, or even the
first part of the fastener part number in the basic
search facility, (also accessible by clicking on the
binocular icon above). If you cannot find the
information you are looking for please contact the local
representative of the Installation Tooling Division (see
the contacts page).
Disclaimer: Whilst every precaution is taken, Wesco Aircraft is not able to guarantee this Catalog is free of viruses and other files
of a malicious nature, and as such declines any responsibility for damage to the user’s computer equipment, however caused.
© Copyright, Peter Lewis, Wesco Aircraft Tool Division.
How to use the Wesco Aircraft
Tooling Catalog
With over 50 years experience we know that every tooling need
can be addressed in a multitude of ways, so we’ve tried to make
our catalog accessible from whatever direction you approach each
requirement.
We hope that by using a series of nested bookmarks in the panel
on the left we can help you ‘drill down’ to the right catalog page –
whatever your starting point.
If you cannot see the Bookmarks panel, click this icon
Use the
and
symbols to expand and collapse each
section (older versions of Adobe Reader use a red
logo in
place of the blue tab)
If you know only the manufacturer’s name, you can search for it in
the bookmarks either alphabetically or under the parent group. In
general this will take you to the front page of a manufacturer’s line
card or catalog in the form in which it was published. Most of these
documents are themselves 'bookmarked' to help you navigate to the right part of that manufacturer's product
line.
Or you may have a particular fastener type to install but need to find the right tool for the job. Use the
symbol to open the Index by Fastener Type and the relevant section(s) within until you find the right fastener.
For example, to find tooling to install Cherry rivets you would need to open Blind Fasteners, then Blind Rivets,
then finally select the right kind of rivet. Note that some proprietary fasteners may be found in an adjacent
section to that expected, especially where the categorization is not obvious. These fastener links are generally
to a named manufacturer's catalog or to a summary page where fastener part numbers can be double checked
and cross referenced with a choice of installation tools, often from several manufacturers. From the summary
page links can be followed successively to a catalog page for each tool, the relevant pulling heads (nose
assemblies), and even the maintenance manual and breakdown drawing for the tool.
The tooling by fastener type summary pages can also be found by keying in the first part of the fastener part
number to the
facility (the binocular icon in older versions) Please be sure to read with great care
the footnotes and information boxes on the summary page - tool selection can be complex ! For example, a
search on MS90354 gives multiple options: double action and single action blind bolts with and without drive
washers, and the tooling is not the same (although by following the on-page links we show how the different
manufacturer's tooling can be converted from one configuration to the other !)
If your initial “Find” yields no result, open the full Adobe Reader Search facility with Ctrl-Shift-F, and use the
options to search the full CD-ROM.
Finally for tooling which is not specific to a kind of fastener it may be easier to use the Index by Function / Tool
Type. The bookmarks here link to the most suitable page in a manufacturers catalog, or in some cases a
choice of manufacturers. Again, click on the
to open each section until the right tool type is visible.
And don't forget – you can always call one of the Installation tooling group contacts on the contact page to help
you identify the right tool.
Disclaimer: Whilst every precaution is taken, Wesco Aircraft is not able to guarantee this catalog is free of viruses and other files
of a malicious nature, and as such declines any responsibility for damage to the user’s computer equipment, however caused.
© Copyright, Peter Lewis Wesco Aircraft Tool Division.
CherryLOCK
® Tool
CherryLOCK®
ToolSelection
Selection
To install these fasteners
Wiredraw CherryLOCK
NAS
PART NO.
use these tools (most popular choices highlighted)
Bulb CherryLOCK
CHERRY
PART NO.
NAS
PART NO.
RIVET GUN
CHERRY
PART NO.
692508 695402 707455 739285 746607 747822 30.91220-0003 30.91220-0004 52533-432
52533-433 5320002253122 5320004225131 5320004246922 5320005142950
5320010488781 5320010495731 5320010978080 5320011117651 5320011365366
430452 431879 432035 435023 481803 483706 521961 524567
988065-05 988065-06 988065-12 988065-13 988065-14 988065-15 988065-16 988065-17 988065-18 988065-22 988065-23 988065-24 988065-25 988065-26 988065-27 988065-28 988065-29 988065-30 988065-31 988065-32 988065-43 988065-44 988065-45 988065-46 988065-47 988065-48 988065-49 988065-50 988065-51 988065-52 988065-53 988065-54 ASNA0061
NAS1399D
NAS1399B
NAS1399M
NAS1399MW
NAS1399MS
CR2162
CR2262
CR2562M
CR2562
CR2562S
433289 454859 454860 25D10B 5320000548416
5320000571706 5320000818307 5320001451864
5320002139146 5320002139150 5320002139152
5320002139153 5320004012093 5320004091846
5320008218383 5320008227528 5320008421851
5320009169661 5320009169662 5320009831620
5320009871076 5320009937351 5320009937364
5320009958907 5320010199294 5320010676409
5320010679120 AF2051 ASNA0061
663896 673638 673645 674349 729769 729770 730464 730465 5320008804683 5320008804684 5320008804685 5320008807015 5320009937365
5320009937367 5320009937546 5320009938706 BACR15EZ ST2230
NAS1399C
NAS1399CW
NAS1399CS
NAS1398D
NAS1398B
NAS1398M
NAS1398MW
NAS1398MS
NAS1398C
NAS1398CW
NAS1398CS
CR2642
CR2652
CR2662
CR2662CW
CR2662S
CR2163
CR2263
CR2563M
CR2563
CR2563S
CR2643
CR2653
CR2663
CR2663CW
CR2663S
481799 503656 536502 599731 629339 631733 657237
659668 667580 697313 697618 697619 748491 754182
754183 754188 784338 25D105B 25D10M
5320000064916 5320000273505 5320000549380
5320000568497 5320000597620 5320000600568
5320000690056 5320000690057 5320000690061
5320000690062 5320000702094 5320000702095
5320000702096 5320001503640 5320001816439
5320001816443 5320002302346 5320002510099
5320003520860 5320004294597 5320004770400
5320004957785 5320005056541 5320005056544
5320005340582 5320005373467 5320005395154
5320007021439 5320007789790 5320008352172
5320008628360 5320008646135 5320008646136
5320009172745 5320009172747 5320009177914
5320009265908 5320009289958 5320009299313
5320009318781 5320009548496 5320009548497
5320009548498 5320009548499 5320009548500
5320009548501 5320009548502 5320009548503
5320009548504 5320009548505 5320009549657
5320009549658 5320009570535 5320009642817
5320009739158 5320009739166 5320009871075
5320010140320 5320010141239 5320010144331
5320010308470 5320010308472 5320010593442
5320011159755 5320011193162 AF2091 CSP179
NAS1738E
NAS1738B
NAS1738M
NAS1738MW
NAS1738C
NAS1738CW
NAS1739E
NAS1739B
NAS1739M
NAS1739MW
NAS1739C
NAS1739CW
443621 444443 444445 445244 447940 454952 529294 563068 614268 5320000078817
5320000176410 5320000577208 5320000690055 5320001436146 5320001766133 5320002241765
431618 110-151 1137AS504 2192395 25D10C
5108T62P 5320000548415 5320000549371
5320000571708 5320000800479 5320000800499
5320001362903 5320002514963 5320003018378
5320003018381 5320003900759 5320004218009
5320004294583 5320004324653 5320004341747
5320002679588 5320002679589 5320007087853 5320007087854 5320007087855 5320007087856
5320007087857 5320007539145 5320007575492 5320008218293 5320008218294 5320008218295
5320008218298 5320008218302 5320008234943 5320008628363 5320008714585 5320008847089
5320008892635 5320008982835 5320008982836 5320008982838 5320009321938 5320009325718
5320009487347 5320009487351 5320009889150 5320009904287 5320009937361 5320010479496
5320010853922 5320010891609 5320011805332 5320011812532 5320012441127 AF2000
ASNA0062
5320004513538 5320004987010 5320007834410
5320007834417 5320007834421 5320008421967
5320008421968 5320008421969 5320009177934
5320009177938 5320009299254 5320009299302
5320009299303 5320009299306 5320009299308
5320009582897 5320009752662 5320009937548
5320009937553 5320009950713 5320009951175
5320009951176 5320009951177 5320009958271
5320010045062 5320010153388 5320010479497
5320010916942 5320011086848 5320011124415
5320011230927 5320011295544 5320011334520
5320011337299 5320011635874 5320011637446
5320011795923 5320011940712 5320011940713
5320012219944 5320012246897 627-503-9602
7600026-002 AF2041 C9605 CSP212 HS5435
PAN3632 ST3067
522-860 5320000816647 5320001026432 5320001156368 5320001213045 5320001397539
5320001989465 5320002139155 5320002139156 5320002139157 5320002139158 5320002139163
5320006205928 5320006205930 5320006205931 5320006205932 5320007217572 5320007217667
CR2239
CR2249
CR2539
CR2539P
CR2839
CR2839CW
CR2238
CR2248
CR2538
CR2538P
CR2838
CR2838CW
CR2235
CR2245
CR2545
CR2845
CR2540
CR2840
RIVET DIA
PULLED
Wiredraw
Bulbed
5320000979070 5320001451907 5320001503606
5320001585288 5320001816427 5320002428050
5320011612618 5320011612619 5320011612620 5320011612621 5320011625757
5320003018557 5320004075666 5320004213484
HS5413M ST2489 9019M65P 9109M65P ST25D45
5320004213485 5320004446784 5320004770412
5320004891118 5320004893568 5320004893569
5320004893570 5320004921154 5320004921156
5320004972863 5320005088845 5320005088846
5320005890038 5320005933823 5320007789791
5320008133919 5320008141165 5320008141169
5320008141177 5320008141179 5320008141180
5320008141181 5320008141182 5320008141183
5320008227527 5320008283305 5320008285245
5320008352168 5320008406240 5320009041605
5320009169664 5320009177939 5320009289962
G700
A Group(1)
H681-3C
H681-4C
522-618 522-629 5320010889218
5320010889219 5320010889220
5320010889221 5320010889222
5320010889223 5320010891391
5320010891392 5320010891393
5320010894223
-3
-4
-4
5320009289963 5320009299255 5320009299310
5320009299321 5320009438252 5320009474370
5320009474404 5320009474405 5320009487350
5320009506956 5320009544844 5320009544853
5320009544855 5320009545073 5320009545074
5320009545075 5320009545076 5320009545078
5320009548490 5320009548491
G784
A Group(1)
5320009548492 5320009548493 5320009548494
5320009548495 5320009548550 5320009581273
5320009752571 5320009853783 5320009980676
5320010038312 5320010141096 5320010212338
5320010684616 5320011646399 5320011896544 AF2090
ST1107 ST1108 ST1139
447830 470985 523183 528664 547749 557663 559871 568119
569104 642838 693097 2100693 2101129 2107212 4047998 110
164-1 110-164-2 110-164-3 110-164-4 110-164-5 5320000030702
G686B-S
A,B,C Group(1)
5320000147047 5320000176407 5320000214108
5320000273754 5320000546717 5320000549359
5320000582499 5320000889227 5320001436311
5320001452065 5320001816810 5320002510100
5320003119592 5320003170803 5320003693168
5320004355347 5320005088842 5320005262819
5320008356332 5320008803334 5320008805896
5320008919074 5320009002523 5320009008965
H681-3C
H681-4C
H681-5C
H681-6C
H681-8C
-3 (2)
-4 (2)
-5 (2)
-6 (2)
-8 (2)(3)
-4
-5
-6
H681-3C
H681-4C
H681-5C
H681-6C
H681-8C
-3
-4
-5
-6
-8
-4
-5
-6
H681-3C
H681-4C
H681-5C
H681-6C
H681-8C
-3
-4
-5
-6
-8
-4
-5
-6
5320009260679 5320009299300 5320009315380
5320009428797 5320009581153 5320009938704
5320009938705 5320010142280 5320010593465
5320010647243 5320011140680 5320011177790
5320011289016 5320011324439 5320011637445
5320011746129 5320011931925 5320011932441
5320011943045 5320012097363 AF2040 ASNA0062 CSP211
PAN3622 ST1086
5320000018983 5320000047320 5320000062659
5320001348620 5320001725225 5320001989457
5320005037258 5320005037277 5320005088791
5320005088819 5320009828816 5320009828817
5320010697628 5320010702133 5320011158235
5320011168411 5320011426301 5320011795922
G689
A,B,C Group(1)
5320009454746 5320009836539 5320009937363 5320009974727 5320010116558 5320011565160
5320011706331 5320011947086 AF2050
534645 567523 580518 635050 638925 653050 655568 666773 726517
726518 726519 732726 732729 2163070 3022313 3022314 52533-439
5320001917184 5320002329854 5320004714109 5320008946392
5320009289447 5320010207862 ST2766 V310678
476395 575417 611174 729771 729772 2173191 2179563 2180462 5320000548322
5320000549358 5320000549379 5320001323687 5320001323688 5320001323695 5320001436228
5320007019708 5320007019721 5320008800741 5320009019270 5320009351225 5320011634324 717260 729776 732596 746608 746609 746748 2182097 4020971 4028333
5320011758797 5320011767404 5320011808750 5320011931922 5320011931923 5320012184586
5320012228015 BACR15FA
584967 589895 590280 663674 664479 739772
5320004810935 9263M33P01 9263M33P02
4035737 4041478 4608T13P01 5320003072303 5320003605171
5320011634323 5320011703051 5320011940708 5320011963291
604163 603252 626736 693691 696073 701977 704306 704307
5320012273478 5320012416477 5320012436225 5320012631825
3M266B 522-963 522-964 5320001898695 5320001898702
9114M58P 9171M10 P15-3842 ST1300
5320001898710 5320001898714 5320001898715
5320001898718 5320001898721 5320001898722
9263M33P03
5320001898835 5320001898859 5320001898860
5320003695129 5320003695132 5320004902237
(1) Rivet group refers to shift-point setting of riveter which may require longer stroke tool.
(2) Limited to -08 grip on universal head, -09 grip on countersunk head
5320004902266 5320004902267 5320004902268
5320007288575 5320007790292 5320007790293
5320007790300 5320007790301 5320007790334
5320008006275 5320008666114 5320009375447
5320009375448 5320009391605 5320009391606
5320001503766 5320001503768 5320001610100 5320001816851
5320001852712 5320001992232 5320003562716 5320003562721
5320009493929 5320009640720 5320009992188 AF2250
ASNA0064 C2808 PAN3620
5320004952970 5320005088639 5320005088828 5320008133894
5320008141150 5320008141157 5320008141158
(3) Pulls aluminum only.
657333 657334 658949 697314 697315 697541 697601 697620
702420 4019949 4019993 4025750 4025751 4027167 4027168
(4) Limited to -04 grip lengths in wiredraw products
5320008246292 5320008325319 5320008421902 5320008805982
5320008805985 5320010038315 5320010448689 5320010760991 5320010760992 5320011632902 5320011676352 AF2291 C2807 SL4129
H690-4C/U
H690-5C/U
H690-6C/U
H690-8C/U
-4
-5
-6 (3)
-8 (3)
-4
-5
5320000070391 5320000582504 5320001131665
5320001131666
5320009353688 5320009382073 5320009882166 5320010038313
5320000068513 5320001436195 5320004515363
CherryLOCK is a registered trade name of Cherry Aerospace LLC
G695B
(4)
4027530 4027631 4027632 4035138 4108507 3M266M
5320008141218 5320008141221 5320008141225 5320008141226
5320010038314 5320010038316 5320010191527
All Rights Reserved
5320011932447 5320011932448 5320011932449 5320011932450 5320011932451 5320011936936 5320011971407 5320011971408
5320000800475 5320000800476 5320000818303
5320012103941 AF2550 ASNA0064 LS41516E ST3053
5320009184886 5320009223517 5320009325717 5320009382079 5320009417908 5320009454694
5320010140321 5320010263174
5320011281103 5320011281104 HS5413
5320011971409 9133M31P 9155M36P01 PAN3627 ST1447 ST1473
5320000673664 5320000789720 5320000792352
432120 433038 433654 433655 441295 441296 505161 505162 594436 710220 5320000120747 5320000548411 5320000755175 5320001727275 5320005890039 5320008218304 5320008227531 5320008646133 5320008646134 5320009289923 5320009937353 5320009937354 5320009937355 5320009937356 5320009937357 5320009937358 5320009937359 5320010191528
5320010199459 5320010882867 5320010887451 5320011271575 5320011485934 5320011504027 5320011582076 5320011637444 5320011930242 5320011946467 5320011971396 5320011971397 5320011971398 5320012030924 5320012032333 5320012706734 5320012706735 5320012706736 5320012706737 5320012730021 25D10D()-() 988065-02 988065-03 988065-04
5320011401480 5320011407327 5320011733692 5320011932443 5320011932444
539707 564869 580328 600616 622764 749266 758765 786375
PULLING HEAD
PART NO.
5320004515364 5320004519162 5320004519163
Where tool part number is underlined in blue - click for catalog page
5320004519165 5320004519166 5320004519167
5320005037274 5320007179729
5320010280840 5320010593469 5320010758986 5320010758987
5320010760993 5320010938536 5320011066747 5320011180924
5320011445635 5320011650125 5320011679428 5320011679429
5320011833424 5320011833425 AF2290 C2809 SL4128
5320010191529 5320010236232 5320010236234
35765 657562 658946 658958 658962 658963 659971 659972 659973 694739 697952 704716 729745 729746 729747 729748 4036446 5320000527128 5320000610103 5320000800592 5320000816638 5320000816639
5320010263361 5320010263362 5320010480571
626735 522-862 522-871 522-873 522-874 522-875 522-879 522-944 522-945 522-946 522-948 522-949 522-950 5320000036956 5320000050989 5320000549356 5320000898682
5320001186695 5320001186698 5320001652056 5320001816102 5320001816350 5320001816355 5320001816359 5320001816375 5320001816381 5320001816385 5320001816387 5320001816397 5320001816398
5320010702134 5320011342124 5320012068446
5320001317459 5320001436395 5320001525911 5320003695126 5320004100012 5320004100013 5320004100014 5320004798927 5320007019798 5320007288567 5320008006274
5320001816767 5320001914169 5320002319427 5320002319431 5320002409572 5320002474467 5320004152261 5320004780520 5320004934094 5320005167982 5320006391128 5320008391112 5320008391124
5320012068447 5320012098074 AF2551 ASNA0063
5320008006276 5320008006277 5320008006278 5320008498749 5320009169534 5320009586194 5320009588383 5320009837510 5320010778488 5320010917986 5320011332236
5320008391143 5320008391245 5320008391292 5320008391352 5320008421899 5320008805984
5320011451627 5320011664057 5320011665345 5320011675531 AF2251 C2806 PAN3620
CherryLOCK® 'A' Tool Selection
NAS
PART NO.
CHERRY
PART NO.
NAS1399D( )A( )
NAS1399B( )A( )
NAS1399M( )A( )
NAS1399MW( )A( )
NAS1399MS( )A( )
NAS1399C( )A( )
NAS1399CW( )A( )
NAS1399CS( )A( )
NAS1398D( )A( )
NAS1398B( )A( )
NAS1398M( )A( )
NAS1398MW( )A( )
NAS1398MS( )A( )
NAS1398C( )A( )
NAS1398CW( )A( )
NAS1398CS( )A( )
CR2172
CR2272
CR2572
CR2572P
CR2572S
CR2672
CR2672CW
CR2672S
CR2173
CR2273
CR2573
CR2573P
CR2573S
CR2673
CR2673CW
CR2673S
5320000056250 5320000056251 5320000056252
5320000056253 5320000056254 5320000058312
5320000058313 5320000058314 5320000062577
5320000062579 5320000076376 5320000076380
5320000076381 5320002963051 5320002986154
5320005021652 5320005021661 5320005126936
5320010192476 5320010316959
use these tools (most popular choices are highlighted)
PULLING HEAD PART NUMBER FOR DIAMETER
-3
-4
-5
-6
-8
RIVET GUN
PULLING HEAD
STYLE
ADAPTER
REQUIRED
G704B(1)
G747(1)
STRAIGHT
RIGHT ANGLE
OFFSET
-
H955-3
-
H955-3
G746A
STRAIGHT
RIGHT ANGLE
OFFSET
STRAIGHT
STRAIGHT
744-300
-
H955-3
(8)
STRAIGHT
680B46
H9055-4
H9055-5
H9055-6
G784(8)
STRAIGHT
STRAIGHT
680B46
680B57
H9055-4
H9055-5
H9055-6
G689
G686B-S
STRAIGHT
STRAIGHT
680B46
680B57
H9055-4
H782
(3)
H955-4
H886-4
H782(4)
H955-5
H886-5
H782(5)
H955-6(2)
H886-6
H782(6)
H955-4
H886-4
(4)
H782
H955-5
H886-5
(5)
H782
H955-6
H886-6
(6)
H782
H955-4
H955-5
H955-6
5320000089303 5320000089304 5320002352510
5320002361788 5320002401824 5320002401832
5320002614517 5320004255342 1837M69P 5320005262825
5320014333325 BACR15GE HS5435A JN0550 ST3M793A
5320000056246 5320000056247 5320000056248
5320000056249 5320000058306 5320000058307
H782
(3)
5320000058308 5320000058309 5320000058310
5320000064913 5320000076374 5320000076378
5320000076379 5320001589397 5320002963103
5320002997911 5320003067381 5320005020962
5320005388281 5320005915093 5320010144332
5320010196566 5320010465433 5320010791961
5320011251269 5320011337298
G83 / G84
(2)
H84-8CLA
(7)
5320000070358 5320000073309 5320000073310
5320000073312 5320000073318 5320002401712
5320002425519 5320004255336 5320012159834
5320005410839 5320013923479 5320013923480 ST3M806A
This Table provided for tool selection only
- not to be used for cross-referencing fasteners.
G700
(7)
H9044-8
H9055-5
H9055-6
H9044-8
(9)
(1) Requires double stroke for grips -5 and longer.
(2) no Aluminum.
(3) Requires nosepiece 882-003
Pneumatic Tools
G902
G902
G902-15
H902-3NPR(10)
STRAIGHT
STRAIGHT
H9055-3
(7) For all-aluminum fasteners only
(8) Limited to -08 grip on univ. head, -09 grip on csk. head
(9) Recomended for long grip - 8
(10) Replace nose tip with 902-038
(11) 3/32" only, requires 728-033 nosetip (included on G30)
Hand tools
G750A
G27(11)
(11)
G29
G30(11)
STRAIGHT
OFFSET
NONE
NONE
NONE
750A-117
750A-088
H782
(3)
H9055-4
H782(4)
H9055-5
H782(5)
H9055-6
H782(6)
CherryLOCK is a registered trade name of Cherry Aerospace LLC
All Rights Reserved
CherryMAX®
h
/ HuckMAX®
k
Tooll Selection
l
NAS
PART NO
NO.
CHERRYMAX
NO
PART NO.
NAS9301B
NAS9301E
NAS9302B
NAS9302E
NAS9303B
NAS9303E
NAS9304B
NAS9304E
NAS9305B
NAS9305E
S930
NAS9306B
NAS9306E
NAS9307M
NAS9307MP
NAS9308M
NAS9308MP
NAS9309M
NAS9309MP
NAS9310M
NAS9310MP
NAS9310C
NAS9311M
NAS9311MP
S93
NAS9311C
NAS9312M
NAS9312MP
CR3213
CR3223
CR3212
CR3222
CR3214
CR3224
CR3243
CR3253
CR3242
C 32 2
CR3252
CR3245
CR3255
CR3523
CR3523P
CR3522
CR3522P
CR3524
CR3524P
CR3553
CR3553P
CR3853
CR3552
CR3552P
C
355
CR3852
CR3555
CR3555P
HUCKMAX MILITARY
PART NO
NO. PART NO
NO.
HR3213
HR3223
HR3212
HR3222
HR3214
HR3224
HR3243
HR3253
HR3242
HR3252
32 2
HR3245
HR3255
HR3523
HR3522
BOEING
PART NO
NO.
M7885/2
AIRBUS
PART NO
RIVET GUN
G704B
G704B-SR
G704B-40SH
G746A
G747
ASNA0078A
ASNA0078B
ASNA0077A
ASNA0077B
M7885/3
H701B-456
H753A-456
H781 456
H781-456
H782
H84A-8
G83(1) / G84 (2)
H828-8
H827-8
and all G704B/G747 heads
H84A-8
G8 S
G84-LS
H828-8
828 8
H827
8
H827-8
H680B200A
H680B208(1)
G784
G686B-S
G689 / G686B
S
H753A-456
H753A
456
H781-456
H750A-8
H750A 8
H753A-456
G750A
H753A
456
H781-456
H782
G27
included
99-3442
99
3
Huck 2013
99-3443
99-1333
99-1336
99 1336
99-1334
5320010425147 5320010425148 5320010425149 5320010428249 5320010428250 5320010430062
5320010430063 5320010430674 5320010430675 5320010430676 5320010430677 5320010431924
5320010431925 5320010431927 5320010431928 5320010431929 5320010431930 5320010431931
5320010431932 5320010431933 5320010431934 5320010431935 5320010433484 5320010433485
5320010433486 5320010434366 5320010435862 5320010435864 5320010435865 5320010435867
5320010436694 5320010436954 5320010443091 5320010480571 5320010702134 5320010812546
5320010845439 5320010846089 5320010846090 5320010846093 5320010846096
M7885/6
M7885/7
BACR15FR( )B( )R
BACR15FR( )E( )R
BACR15FP( )B( )R
BACR15FR(
C 1
( ))E(( ))R
M7885/4
M7885/5
5320011502757 5320011502758 5320011502759 5320011502760 5320011502762 5320011502763
5320011502764 5320011502765 5320011502766 5320011502767 5320011502768 5320011502769
5320011502770 5320011502771 5320011505107 5320011505954 5320011505955 5320011505956
5320011505957 5320011505958 5320011505959 5320011505960 5320011505961 5320011505962
ASNA0078A( )( )X
ASNA0078B( )( )X
ASNA0077A( )( )X
ASNA0077B(
S 00
( )( ))X
ASNA0078C or E
ASNA0078D or F
ASNA0077C or E
ASNA0077D or F
5320011505963 5320011505964 5320011505965 5320011505966 5320011505967 5320011505968
5320011505969 5320011505970 5320011505971 5320011505972 5320011505973 5320011505974
HR3524
5320011505975 5320011505976 5320011505977 5320011505978 5320011505979 5320011508042
5320011508043 5320011508044 5320011508045 5320011508046
HR3553
M7885/8
HR3552
M7885/9
PULLING HEAD
PART NO
NO.
ASNA0078C or E( )( )X
BACR15FR( )MP( )R ASNA0078D or F( )( )X
BACR15FR( )M( )R
BACR15FP( )M( )R ASNA0077C or E( )( )X
BACR15FP(
C 5 ( ))MP(( ))R ASNA0077D
S 00
o
or F(( )( ))X
5320011847728 5320011847729 5320011853394 5320011878589 5320011904712 5320011960266 5320011976642
5320012041995 5320012041996 5320012041997 5320012056976 5320012056977 5320012179135 5320012181515
5320012181516 5320012206182 5320012216868 5320012216869 5320012216870 5320012216871 5320012216872
5320012216914 5320012216915 5320012216916 5320012216917 5320012216918 5320012216919 5320012216920
5320012216921 5320012216923 5320012216924 5320012217101 5320012220137 5320012220138 5320012220139
5320012222492 5320012222493 5320012222494 5320012234438 5320012237611 5320012248266 5320012248267
5320012248268 5320012253440 5320012253441 5320012253442
This Table provided for tool selection only - not to be used for cross-referencing fasteners.
ADAPTER
REQUIRED
HEAD
STYLE
RIVET DIA
PART NO
NO.
744-200
744-200
744-300
744-700
744-500
00
744
500
744-500
744-600
680B205
680B205
Straight
90°
Offset Single Jaw
Offset,
Offset, Double Jaw
Straight
90°
Offset
-4, -5, -6
-4, -5, -6
4 -5,
5 -6
6
-4,
-4, -5, -6
-8
-8
-8
-4, -5, -6
-8
-8
8
8
-8
-4, -5, -6
-4, -5, -6
-8
8
-4
4, -5
5, -6
6
-4, -5, -6
-4, -5, -6
-8
8
-4,
4, -5,
5, -6
6
-4, -5, -6
-4, -5, -6
-4
4
-4,, -5,
5, -6
6
-4, -5, -6
-4, -5, -6
-4,
4 -5,
5 -6
6
-4,, -5,, -6
Straight
90°
Offset
750A088
750A088
750A088
Straight
St i ht
Straight
90°
90
Offset
Straight
Straight
St i ht
90°
90
Offset, Single Jaw
Offset, Double Jaw
-
S ag ,S
Straight,
Short
o
Straight, Long
Offset, Single Jaw
Offset,
Offset Double Jaw
90°
(1) G83 & G784 will not pull -8 Monel or Inconel fasteners
(2) Huck 244 also compatible with G83/G84 pulling heads
CherryMAX is a registered trade name of Cherry Aerospace LLC
HuckMAX is a registered trade name of Alcoa Fastening Systems
All Rights Reserved
5320012313890 5320012428573 5320012586058 5320012586059 5320012738082 5320012750412
8251606-045 8251606-046 8251606-047 8251606-048 8251606-049 8251606-051
E2706288 E2706294 E2706305 E2706311 E2706327 E2706333 E2706349 E2706361
116A10005-16 116A10005-17 116A10005-18 116A10005-19 116A10005-20 13004076-01 13004076-02 13004076-03
13004076-04 13031049-1 13031049-1 13031049-2 13031049-2 13031049-3 13031049-3 132352B()() 1694M76P01
8251606-052 8251606-053 8251606-054 8251606-055 8251606-056 8251606-057
8251606-058 8251606-059 8251606-061 8251606-062 8251606-063 8251606-064
E2706377 E2706383 E2706399 E2706400 E2706416 E2706511 E2706577 E2706783
E2706799 E2706822 E2707407 E5067201 E5067617 E5900520 J519920 J519924
1694M76P02 1694M76P03 1694M76P04 1694M76P05 176C2845-1 176C2845-2 176C2845-3 176C2845-4 176C2845-5
8251606-065 8251606-066 8251606-067 8251606-068 8251606-069 8251606-510
J519925 J519926 J519931 J519932 J519965 J525209 J525210 J525211 J525213
5320012751097 5320012864326 5320012877133 5320012877134 5320012877607 5320012880889
ASNA0077A 522500 522520 522540 522541 522560 522630
522631 522632 522633 522634 522635 522636 522637 522638
5320010846098 5320010846099 5320010846101 5320010849234
5320011508047 5320011508048 5320011508049 5320011508050
5320012880890 5320012887639 5320012890030 5320012890031 5320012890033 5320012890034
5320012890035 5320012917783 5320012966387 5320012986093 5320012986094 5320012986095
522639 522642 522643 522644 522645 522646 522647 522648
5320010849235 5320010849236 5320010851238 5320010851240
5320011508051 5320011508052 5320011508053 5320011508054
5320012987174 5320013006841 5320013011110 5320013011111 5320013011112 5320013011114
522649 522650 522651 522652 522653 522655 522656 522657
5320010851752 5320010851753 5320010851755 5320010851756
5320011508055 5320011508056 5320011508057 5320011508058
5320013011115 5320013011116 5320013011117 5320013011118 5320013011119 5320013011120
176C2845-6 176C2845-7 176C2845-8 1PE0546E-()-() 1PE0546M-()-() 1PE0547E-()-() 1PE0547M-()-() 23052990-()()
8251606-511 8251606-610 8251606-611 8251606-614 86-81911-001 86-81911-002 86-
J525215 J525216 J525217 J525218 J525219 J525220 J525221 J525222 J525224
PAN3644-48-() PAN3645-32-() PAN3645-40-() PAN3645-48-()
522658 522659 522660 522661 522663 522664 522665 522666
5320010853320 5320010853321 5320010853322 5320010857787
5320011508059 5320011508060 5320011508061 5320011508062
5320013011121 5320013011122 5320013011123 5320013011124 5320013011125 5320013011126
2935786-01 2935786-02 2935786-03 2935786-04 2935786-05 2935786-06 2935786-07 2935786-08 2935786-09 2935786- 719812-15 719812-16 719812-17 719812-18
81911-003 86-81911-004 86-81911-005 86-81911-006 86-81911-007 86-81911-008 86-
J525228 J525229 J525230 J525231 J525233 J528065 J528066 LS41511M()-()
PYN00007-02 PYN00007-03 PYN00007-04 PYN00007-05 PYN00007-
522667 522668 522669 522670 522671 522672 522673 522674
5320010858427 5320010859995 5320010861142 5320010861143
5320011509367 5320011511061 5320011515146 5320011528665
5320013011127 5320013011128 5320013011129 5320013011130 5320013011131 5320013011132
10 2935786-11 2935786-12 2935786-13 2935786-14 2935786-15 2935786-16 2935786-17 2935786-18 2935786-19
719812-19 719812-20 719812-21 719812-22
81911-009 86-81911-010 86-81911-011 86-81911-012 86-81911-013 86-81911-014 86-
LS41512M()-() LS42511M()-() LS42512M()-() M7885/2-()-() M7885/2-()-() M7885/3-()-()
06 PYN00007-07 PYN00007-08 PYN00007-09 PYN00007-10
522675 522676 522690 750088 4073362 5594965 5595046 5595047
5320010861144 5320010861145 5320010861146 5320010861147
5320011528666 5320011528667 5320011528668 5320011528669
5320013011133 5320013011134 5320013011135 5320013011136 5320013013579 5320013013580
2935786-20 2935786-21 2935786-22 2935786-23 2935786-24 2935786-25 2935786-26 2935786-27 2935786-28 2935786- 719812-23 719812-24 719812-25 719812-26
81911-015 86-81911-016 86-81911-017 86-81911-018 86-81911-019 86-81911-020 86-
M7885/3-()-() M7885/6-()-() M7885/7-()-() MBBN3012L32() MBBN3012L36()
5595048 5595049 5595050 5595051 5595052 5595053 5595054
5320010861148 5320010861150 5320010863597 5320010864963
5320011528670 5320011528672 5320011528675 5320011528677
5320013013581 5320013013582 5320013070759 5320013076714 5320013076715 5320013076716
29 2935786-30 2935787-01 2935787-02 2935787-03 2935787-04 2935787-05 2935787-06 2935787-07 2935787-08
81911-021 86-81911-022 86-81911-023 86-81911-024 86-81911-025 86-81911-026 86-
MBBN3012L40() MBBN3012L44() MBBN3012L48() MBBN3012L52() MBBN3012L64()
04 PYN00167-05 PYN00167-06 PYN00167-07 PYN00167-08
5595056 5595057 5595058 5595059 5595060 5934442 5982864
5320010877045 5320010878841 5320010878842 5320010903166
5320011528678 5320011528679 5320011528680 5320011528681
5320013077098 5320013102642 5320013199326 5320013208152 5320013212168 5320013212169
2935787-09 2935787-10 2935787-11 2935787-12 2935787-13 2935787-14 2935787-15 2935787-16 2935787-17 2935787- 719815-03 719815-04 719815-05 719815-06
81911-027 86-81911-028 86-81911-029 86-81911-030 86-81911-031 86-81911-032
MBBN3012L68() MBBN3012M32() MBBN3012M36() MBBN3012M40() MBBN3012M44()
5982866 5982867 5982868 5982872 10042176 10042177 10042178
5320010911864 5320010913528 5320010919174 5320010919175
5320011528682 5320011528684 5320011528689 5320011528690
5320013234204 5320013259006 5320013289815 5320013289816 5320013289817 5320013289818
18 2935787-19 2935787-20 2935787-21 2935787-22 2935787-23 2935787-24 2935787-25 2935787-26 2935787-27
719815-07 719815-08 719815-09 719815-10
ASNA0077A()()X ASNA0077B()() ASNA0077B()()X ASNA0077C()() ASNA0077C()()X
MBBN3012M48() MBBN3012M52() MBBN3012M64() MBBN3012M68() MBBN3013L32()
03 PYN00168-04 PYN00168-05 PYN00168-06 PYN00168-07
719815-11 719815-12 719815-13 719815-14
719812-27 719812-28 719815-01 719815-02
ST1173-01 ST1173-02 ST1173-03 ST1173-04 ST1173-05 ST1173-06 ST1173-07 ST1173-08
11500114 11500114 39185038 58559170 5320000068513
5320010919176 5320010919177 5320010919179 5320010922125
5320011528691 5320011531252 5320011531253 5320011556508
5320013289819 5320013289820 5320013289821 5320013289822 5320013289823 5320013289824
2950744-1()() 2950744-2()() 305-2118-010 305-2118-020 305-2118-030 305-2118-040 305-2118-050 305-2118-060 305-
ASNA0077D()() ASNA0077D()()X ASNA0077E()() ASNA0077E()()X ASNA0077F()()
MBBN3013L36() MBBN3013L40() MBBN3013L44() MBBN3013L48() MBBN3013L52()
5320001436195 5320004515363 5320004515364 5320004519163
5320010923469 5320010926976 5320010928759 5320010944411
5320011559854 5320011559855 5320011560252 5320011560253
5320012253443 5320012254865 5320012254866
5320013289825 5320013289826 5320013289827 5320013289828 5320013289829 5320013289830
2118-070 305-2118-080 305-2118-090 305-2118-100 305-2118-110 305-2118-120 305-2118-130 305-2118-140 305-2118- 719815-15 719815-16 719815-17 719815-18
ASNA0077F()()X ASNA0078A()() ASNA0078A()()X ASNA0078B()() ASNA0078B()()X
MBBN3013L64() MBBN3013L68() MBBN3013M32() MBBN3013M36() MBBN3013M40()
02 PYN10075-03 PYN10075-04 PYN10075-05 PYN10075-06
5320004519165 5320004519166 5320004519167 5320004519176
5320010967399 5320010978081 5320010978082 5320010978083
5320011564444 5320011564445 5320011564446 5320011564447
5320012254867 5320012254868 5320012254869
5320013289831 5320013289832 5320013289833 5320013289834 5320013300866 5320013314280
150 305
305-2118-160
2118 160 305
305-2118-170
2118 170 305
305-2118-180
2118 180 305
305-2118-190
2118 190 305
305-2118-200
2118 200 305
305-2118-210
2118 210 305
305-2118-220
2118 220 305
305-2118-230
2118 230
719815 19 719816
719815-19
719816-01
01 719816
719816-02
02 719816
719816-03
03
ASNA0078C()() ASNA0078C()()X ASNA0078D()() ASNA0078D()()X ASNA0078E()()
MBBN3013M44() MBBN3013M48() MBBN3013M52() MBBN3013M64() MBBN3013M68()
PYN10075 07 PYN10075
PYN10075-07
PYN10075-08
08 PYN10075
PYN10075-09
09 PYN10075
PYN10075-10
10 PYN10075
PYN10075-
ST1212 08 ST1212
ST1212-08
ST1212-09
09 ST1213
ST1213-02
02 ST1213
ST1213-03
03 ST1213
ST1213-04
04 ST1213
ST1213-05
05 ST1213
ST1213-06
06 ST1213
ST1213-07
07
5320005037274 5320007179729 5320010263361 5320010263362
5320010978084 5320011262660 5320011294525 5320011332233
5320011566458 5320011566459 5320011566460 5320011570578
5320012254870 5320012254871 5320012254872
5320013335544 5320013336479 5320013339387 5320013339942 5320013377876 5320013377877
305-2118-240 305-2118-250 305-2118-260 305-2118-270 305-2118-280 305-2118-290 305-2118-300 30975-1 30975-3
719816-04 719816-05 719816-06 719816-07
ASNA0078E()()X ASNA0078F()() ASNA0078F()()X B0207003-()-() B0207003M()-()
MBBN3014L32() MBBN3014L40() MBBN3014L48() MBBN3014L64() MBBN3014M32()
11 S2456-()-() S2457-()-() S2906-4-() S2906-5-() S2906-6-() S2907-4-() ST1213-08 ST1213-09 ST1213-10 ST1213-11 ST1214-02 ST1214-03 ST1214-04 ST1214-05
5320010338176 5320010338177 5320010338178 5320010338179
5320011335889 5320011337300 5320011340232 5320011345839
5320011576363 5320011583432 5320011583433 5320011583434
5320012254873 5320012255777 5320012255778
5320013377878 5320013377879 5320013377880 5320013377881 5320013377882 5320013377883
30975-5 30975-7 3123AS673/3-4-() 3123AS673/7-6-() 3123AS673/9-6-() 3123AS902/9-6-() 4051745-22 491B0700058A()() 719816-08 719816-09 719816-10 719816-11
B0207003M()-()P B0207004-()-() B0207004M()-() B0207004M()-()P B0207005-()-()
MBBN3014M40() MBBN3014M48() MBBN3014M64() MPA25011-4-() MPA25011-5-()
S2907-5-() S2907-6-() S3142-()-() SCGS1054-()-() SM-A-9126510-05
5320010338180 5320010338181 5320010338637 5320010338638
5320011345844 5320011345849 5320011345850 5320011346943
5320011587848 5320011599410 5320011599411 5320011630178
5320012255779 5320012256356 5320012256357
5320013377884 5320013377885 5320013377886 5320013377887 5320013377888 5320013382856
50P308 561018-1 5647801-001 5647801-001 5647801-002 5647801-002 5647801-003 5647801-003 5647801-004
719816-12 719816-13 719816-14 719816-15
B0207005M()-() B0207005M()-()P BACR15FP4B()R BACR15FP4E()R BACR15FP4M()R
MPA25011-6-() MPA25021-4-() MPA25021-5-() MPA25021-6-() NAS9301B-()-()
SM-A-912651-01 SM-A-912651-02 SM-A-912651-03 SM-A-912651-04
5320010338639 5320010338640 5320010338641 5320010338642
5320011348771 5320011357319 5320011361782 5320011361785
5320011630179 5320011641672 5320011641673 5320011641674
5320012256358 5320012257793 5320012257794
5320013383545 5320013384194 5320013388255 5320013390273 5320013394080 5320013394081
5647801-004 5647801-005 5647801-005 5647801-006 5647801-006 5647801-007 5647801-007 5647801-008 5647801-
719816-16 719816-17 719816-18 719816-19
BACR15FP4MP()R BACR15FP5B()R BACR15FP5E()R BACR15FP5M()R
NAS9301BNS-()-() NAS9301E-()-() NAS9301ENS-()-() NAS9302B-()-() NAS9302BNS-()-()
SM-A-912651-05 SM-A-912651-06 SM-A-912651-07 SM-A-912651-08
719817-10 719817-11 719817-12 719817-13 719817-14 719817-15
719817-16 719817-17 719817-18 719817-19 719817-20 719817-21
719817-22 719817-23 719817-24 719817-25 719817-26 719817-27
5320010338643 5320010339125 5320010339126 5320010339127
5320011361787 5320011363562 5320011364497 5320011368361
5320011641675 5320011641676 5320011641677 5320011641678
5320012264972 5320012264973 5320012264974
5320013394084 5320013394085 5320013453796 5320013493142 5320013493143 5320013526794
008 5647801-010 5647801-010 5647801-011 5647801-011 5647801-012 5647801-012 5647801-013 5647801-013
719816-20 719816-21 719816-22 719816-23
BACR15FP5MP()R BACR15FP6B()R BACR15FP6E()R BACR15FP6M()R
NAS9302E-()-() NAS9302ENS-()-() NAS9303B-()-() NAS9303BNS-()-() NAS9303E-()-()
SM-A-912651-09 SM-A-912651-10 SM-A-912651-11 SM-A-912651-12
5320010339128 5320010339662 5320010339663 5320010341883
5320011384239 5320011387759 5320011435075 5320011435078
5320011641679 5320011641680 5320011641681 5320011641682
5320012264975 5320012264976 5320012264977
5320013536933 5320013537948 5320013537949 5320013543758 5320013645561 5320013737313
5647801 014 5647801
5647801-014
5647801-014
014 5647801
5647801-015
015 5647801
5647801-015
015 5647801
5647801-016
016 5647801
5647801-016
016 5647801
5647801-017
017 5647801
5647801-017
017 5647801
5647801-
719816 24 719816
719816-24
719816-25
25 719816
719816-26
26 719816
719816-27
27
BACR15FP6MP()R BACR15FR4B()R BACR15FR4E()R BACR15FR4M()R
NAS9303ENS () () NAS9304B
NAS9303ENS-()-()
NAS9304B-()-()
() () NAS9304BNS
NAS9304BNS-()-()
() () NAS9304E
NAS9304E-()-()
() () NAS9304ENS
NAS9304ENS-()-()
() ()
SM A 912651 13 SM
SM-A-912651-13
SM-A-912651-14
A 912651 14 SM
SM-A-912651-15
A 912651 15 SM
SM-A-912651-16
A 912651 16
ST1217 04 ST1217
ST1217-04
ST1217-05
05 ST1217
ST1217-06
06 ST1217
ST1217-07
07 ST1217
ST1217-08
08 ST1217
ST1217-09
09 ST1524
ST1524-02
02 ST1524
ST1524-03
03
719817-28 719817-29 719817-30 719817-31 719817-32 719817-33
5320010341884 5320010341885 5320010341886 5320010342843
5320011441029 5320011441031 5320011449017 5320011450830
5320011641683 5320011641684 5320011644503 5320011645646
5320012264978 5320012266769 5320012266770
5320013737314 5320013740502 5320013855429 5320013855438 5320013855461 5320013868608
018 5647801-018 5647801-020 5647801-020 5647801-021 5647801-021 5647801-022 5647801-022 5647801-023
719816-28 719816-29 719816-30 719816-31
BACR15FR4MP()R BACR15FR5B()R BACR15FR5E()R BACR15FR5M()R
NAS9305B-()-() NAS9305BNS-()-() NAS9305E-()-() NAS9305ENS-()-() NAS9306B-()-()
SM-A-912651-17 SM-A-912651-18 SM-A-912651-19 SM-A-912651-20
719817-34 719817-35 719817-36 719817-37 803724-1()() 803724-2()()
5320010346673 5320010356183 5320010362824 5320010371249
5320011458426 5320011482363 5320011482364 5320011502737
5320011645647 5320011645648 5320011645649 5320011645650
5320012286262 5320012286263 5320012286264
5320013882575 5320013885286 5320013885365 5320013885375 5320013903112 5320013913622
5647801-023 5647801-024 5647801-024 5647801-025 5647801-025 5647801-026 5647801-026 5647801-027 5647801-
719816-32 719816-33 719816-34 719816-35
BACR15FR5MP()R BACR15FR6B()R BACR15FR6E()R BACR15FR6M()R
NAS9306BNS-()-() NAS9306E-()-() NAS9306ENS-()-() NAS9307M-()-() NAS9307ML-()-()
SM-A-912651-21 SM-A-912651-22 SM-A-912651-23 SM-A-912651-24
8251606-041 8251606-042 8251606-043 8251606-044 5320012299625
5320010404810 5320010404811 5320010416447 5320010416448
5320011502738 5320011502739 5320011502740 5320011502741
5320011646396 5320011646397 5320011646398 5320011648612
5320012294119 5320012294120 5320012294121
5320014075245 5320014224576 5320014224578 5320014224581 5320014224582 5320014224596
027 5647801-028 5647801-028 627-024-9101 627-024-9103 7026166-()() 719811-01 719811-02 719811-03 719811-04
719816-36 719816-37 719816-38 719816-39
BACR15FR6MP()R CAN43076B-()-() CAN43076E-()-() CAN43076M-()-() CAN43076MP-()- NAS9307MN-()-() NAS9307MP-()-() NAS9308M-()-() NAS9308ML-()-() NAS9308MN-()-()
SM-A-912651-25 SM-A-912651-26 SM-A-912651-27 SM-A-912651-28
5320012299626 5320012299627 5320012301804 5320012301805
5320010416449 5320010416450 5320010416451 5320010416452
5320011502742 5320011502743 5320011502744 5320011502745
5320011648613 5320011648614 5320011648615 5320011648616
5320012294122 5320012298190 5320012298191
5320014224597 5320014227081 5320014227082 5320014229600 11073-001 11073-002 11073-003 11073-
719811-05 719811-06 719811-07 719811-08 719811-09 719811-10 719811-11 719811-12 719811-13 719811-14 719811-
719816-40 719816-41 719816-42 719816-43
() CAN43077B-()-() CAN43077E-()-() CAN43077M-()-() CAN43077MP-()-() CAN43078B-()- NAS9308MP-()-() NAS9309M-()-() NAS9309ML-()-() NAS9309MN-()-() NAS9309MP-()-()
SM-A-912651-29 SM-A-949357-01 SM-A-949357-02 SM-A-949357-03
5320012301806 5320012301807 5320012303467 5320012303468
5320010416457 5320010422891 5320010422892 5320010422893
5320011502746 5320011502747 5320011502748 5320011502749
5320011648617 5320011651385 5320011651386 5320011651387
5320012298192 5320012298193 5320012298194
004 11073-005 11073-006 116A10005-01 116A10005-02 116A10005-03 116A10005-04 116A10005-05
15 719811-16 719811-17 719811-18 719811-19 719811-20 719811-21 719811-22 719811-23 719811-24 719811-25
719817-01 719817-02 719817-03 719817-04
() CAN43078E-()-() CAN43078M-()-() CAN43078MP-()-() CAN43079B-()-() CAN43079E-()- NAS9310M-()-() NAS9310ML-()-() NAS9310MN-()-() NAS9310MP-()-() NAS9311M-()-()
SM-A-949357-04 SM-A-949357-05 SM-A-949357-06 SM-A-949357-07
CherryMAX® 'AB' Tool Selection
NAS
PART NO.
CHERRYMAX
PART NO.
RIVET GUN
G700
NAS1399D( )AB( )
NAS1399B( )AB( )
NAS1399M( )AB( )
NAS1399MW( )AB( )
NAS1399C( )AB( )
NAS1399CW( )AB( )
NAS1398D( )AB( )
NAS1398B( )AB( )
NAS1398M( )AB( )
NAS1398MW( )AB( )
NAS1398C( )AB( )
NAS1398CW( )AB( )
CR4172
CR4272
CR4522
CR4522P
CR4622
CR4622D
CR4622CW
CR4173
CR4273
CR4523
CR4523P
CR4623
CR4623D
CR4623CW
NAS1399D()AB() 91150000 91150001 91150002 91150003 91150004 91150005 5320002935121 5320002935122 5320002935124 5320002963040
5320003212521 5320005088841 5320006151898 5320010124581 5320010161699 5320010251811 5320010579370 5320010858428 5320011051912
5320011334907 5320011940712 5320013013575 5320013013576 5320013013577 5320013013578 5320013081108 5320013283828 5320013286097
5320013286098 5320013294223 5320013303403 5320013357132 5320013357133 5320013360072 5320013360073 5320013360074 5320013360075
5320013360076 5320013360707 5320013360707 5320013360708 5320013360709 5320013360710 5320013360711 5320013363264 5320013365405
5320013365406 5320013382858 5320013382859 5320013383178 5320013383179 5320013384193 5320013384201 5320013397268 5320013397269
5320013397270 5320013483630 5320013490931 5320013515623 5320013519428 5320013519429 5320013519430 5320013521952 5320013526793
5320013539349 5320013876458 5320013876562 5320013916184 5320013996102 5320014117166 5320014184304 03A061C()-() 03A062C()-() 152D5113-1
152D5113-2 152D5113-21 152D5113-22 152D5113-23 152D5113-24 152D5113-25 152D5113-26 152D5113-3 152D5113-4 152D5113-5 152D5113-6 152D51137
1AE0196T01 1AE0196T02 4082T69P01 4082T69P02 4086-81916-()-() 4086-81917-()-() 627-513-9051 627-513-9052 627-513-9053 ABS0546D()-() ABS0547D()() B0207007-()-() FKR19307 NAS1398C()AB() NAS1398CS()AB() NAS1398CW()AB() NAS1398D()AB() NAS1398DFC()AB() NAS1398DP()AB() NAS1398M()AB()
NAS1398MS()AB() NAS1398MW()AB() NAS1399C()AB() NAS1399CS()AB() NAS1399CW()AB() NAS1399DFC()AB() NAS1399DP()AB() NAS1399M()AB()
NAS1399MS()AB() NAS1399MW()AB() ST1562-01 ST1562-02 ST1562-03 ST1562-04 ST1562-05 ST1562-06 ST1562-07 ST1562-08 ST1562-09 ST1588-401
ST1588-402 ST1588-403 ST1588-404 ST1588-405 ST1588-406 ST1588-407 ST1588-408 ST1588-409 ST1588-501 ST1588-502 ST1588-503 ST1588-504
(3)
G704B
G704B-SR(3)
G704B-40SH(3)
G746A
G747(3)
ST5066-604 ST5066-605 ST5066-606 ST5066-607 ST5066-608 ST5066-609 ST5066-610 ST5066-611 ST5066-612
(1)
G744
(1) Obsolete tool - included for reference only
(2) Pulls monel and stainless in all diameters
Pulls aluminum in -4 and -5 diameters only.
(3) May require double stroke
(4) Recommended for long grip length -8 dia. products, except all aluminum.
(5) Preferred option for aluminium fasteners
(6) Requires 782-6AL nosepiece to pull -6 dia all aluminum
G784
G750A
CherryMAX is a registered trade name of Cherry Aerospace LLC
All Rights Reserved
ADAPTER
REQUIRED
680B46
HEAD
STYLE
RIVET DIA
PART NO.
-4, -5
-6
H701B-456
(5)
H955-6
H753A-456
H781-456
H782
-
Straight
Straight
90°
Offset, Single Jaw
Offset, Double Jaw
-4, -5, -6(2)
-6
-4, -5, -6(2)
-4, -5, -6(2)
-4, -5, -6(6)
744-200
744-300
Straight
Straight
90°
H84A-8
G83 / G84
H84-8CLA(5)
H828-8
PULLING HEAD
PART NO.
H680B200A
H9055-6
-4, -5, -6(2)
Straight
90°
-4, -5, -6(2)
-6
-8
-8
680B46
680B57
-
Straight
-4, -5, -6(2)
-6
-8
-8
750A088
750A088
750A088
Straight
Straight
90°
Offset, Single Jaw
Offset, Double Jaw
-4, -5, -6
-8(2)
-4, -5, -6(2)
-4, -5, -6(2)
-4, -5, -6(6)
H846A-456
H955-6(5)
H744A-8
H828-8
744A20
-
H680B200A
H9055-6
H9044-8
H680B208(4)
H750A-8
H753A-456
H781-456
H782
-8
-8
-8
(2)
Cherry SST® Tool Selection
CHERRY
PART NO.
BOEING
PART NO.
CR6252-( )-( )
CR6253-( )-( )
CR6222-( )-( )
CR6223-( )-( )
CR6224-( )-( )
BACR15GJ( )E( )
BACR15GK( )E( )
BACR15GL( )E( )
BACR15GM( )E( )
5320014547578 5320014547581 5320014547582 5320014547584 5320014547587 5320014547588 5320014547590 5320014547592 5320014603727 5320014603729 5320014603733 5320014603734 5320014603735
5320014603737 5320014603738 5320014603740 5320014603741 5320014603743 5320014603744 5320014603746 5320014603747 5320014603748 5320014603749 5320014603750 5320014603751 5320014603752
5320014603753 5320014603754 5320014603755 5320014603756 5320014603757 5320014603758 5320014603759 5320014603760 5320014603761 5320014603762 5320014603763 5320014603764 5320014603765
5320014603766 5320014603767 5320014603768 5320014603769 5320014603770 5320014603771 5320014603772 5320014603773 5320014603774 5320014603775 5320014603776 5320014603777 5320014603778
5320014603779 5320014603780 5320014603781 5320014603782 5320014603783 5320014603784 5320014603785 5320014603786 5320014603787 5320014603788 5320014603789 5320014603790 5320014603791
5320014603792 5320014603793 5320014603794 5320014603795 5320014603796 5320014603797 5320014603798 5320014603799 5320014603800 5320014603801
5320014603802 5320014603803 5320014603804 5320014603805 5320014603806 5320014603807 5320014603808 5320014603809 5320014603810 5320014603811 5320014603812 5320014603813 5320014603814
5320014603815 5320014603816 5320014603817 5320014603818 5320014603819 5320014603820 5320014603821 5320014603822 5320014603823 5320014603824 5320014603825 5320014603826 5320014603827
5320014603828 5320014603829 5320014603830 5320014603831 5320014603832 5320014603833 5320014603834 5320014603835 5320014603836 5320014603837 5320014603838 5320014603839 5320014603840
5320014603841 5320014603842 5320014603843 5320014603844 5320014603845 5320014603846 5320014603847 5320014603848 5320014603849 5320014603850 5320014603851 5320014603852 5320014603853
5320014603854 5320014603855 5320014603856 5320014603857
RIVET GUN
ADAPTER PULLING HEAD
REQUIRED
PART NO.
HEAD
STYLE
RIVET DIA.
-4, -5,
-4, -5,
-4, -5,
G701A
-
H701B-456
H753A-456
H781-456
Straight
90°
Offset
G704B
G704B-SR
G704B-40SH
G746A
G747
G83 / G84
744-300
H701B-456
H753A-456
H781-456
H782
Straight
90°
Offset, single jaw
Offset, double jaw
G744(1)
-
H846A-456(1)
Straight
-4, -5, -6
G700
-
H608B200A
Straight
-4, -5
G784
G686B-S
G689
-
H608B200A
Straight
-
Included
Straight
Included
H753A-456
H781-456
H782
Straight
90°
Offset, single jaw
Offset, double jaw
(1)
-4, -5, -6
-4, -5, -6
-4, -5, -6
-4, -5, -6
(1) Obsolete tool - included for reference only
-4, -5, -6
Hand Tools
G27
G750A
Cherry SST is a registered trade name of Cherry Aerospace LLC
All Rights Reserved
-
-4 only
-4, -5, -6
-4, -5, -6
-4, -5, -6
-4, -5, -6
Cherry Nut Plate Rivet Tool Selection
CHERRY
PART NO. (INCH)
CCR244CS
CCR244SS
CCR264CS
CCR264SS
CCR274CS
CCR274SS
CHERRY
PART NO. (METRIC)
CCMR244CS
CCMR244SS
CCMR264CS
CCMR264SS
CCMR266CS
CCMR274CS
CCMR274CS
MS
PART NO.
MS20605R( )W( )
MS20605H( )W( )
MS20604R( )W( )
MS20604H( )W( )
MS20604S( )W( )
BOEING
PART NO.
BACR15DR( )A( )
BACR15DR( )A( )D
BACR15DR( )A()L
BACR15DR( )AC( )
BACR15DR( )-( )
BACR15DR( )PA( )
BACR15DR( )PA( )D
BACR15DR( )PA( )L
BACR15DR( )PAC( )
BACR15DR( )P( )
EN
PART NO.
DIN
PART NO.
AIRBUS
PART NO.
POWER
TOOL
PULLING HEAD ADAPTER
STYLE
REQUIRED
PULLING
HEAD
NOSEPIECE
REQUIRED
RIVET
DIAMETERS
MAXIMUM
GRIP
G902
STRAIGHT
STRAIGHT
-
H902-3NPR
H902-4NPR
-
3/32 & 2.5 mm
1/8, 3.0 & 3.5 mm
-8
-12
G902-15
STRAIGHT
STRAIGHT
-
H9015-3C
H9015-4C
-
3/32 & 2.5 mm
1/8, 3.0 & 3.5 mm
-9
-9
G702A
STRAIGHT
STRAIGHT
-
H702-3NPR
728A9-3
728A9-104
3/32 & 2.5 mm
1/8, 3.0 & 3.5 mm
-12
-12
STRAIGHT
704A9
OFFSET
STRAIGHT
704A9
H9015-3C
H782
H9015-4C
782-3
-
3/32 & 2.5 mm
3/32 & 2.5 mm
1/8, 3.0 & 3.5 mm
All
All
All
782-3
-
3/32 & 2.5 mm
3/32 & 2.5 mm
3/32 & 2.5 mm
1/8, 3.0 & 3.5 mm
-4
-4
-4
-4
ABS0112
NSA5448
NSA5449
EFA
PART NO.
G746A
DIN 65551
EN3767
704A9
OFFSET
STRAIGHT
704A9
H747-3NPR
H9015-3C
H782
H9015-4C
G29
INCLUDED
INCLUDED
-
-
728A9-3
728A9-104
3/32 & 2.5 mm
1/8, 3.0 & 3.5 mm
All
All
G750A
OFFSET
750A088
H782
782-3
3/32 & 2.5 mm
All
G747
DIN 65552
-
STRAIGHT
STRAIGHT
JN0397
EN3766
Hand Tools
Cherry is a registered trade name of Cherry Aerospace LLC
All Rights Reserved
B0207017C()-() 731824 1048580 5320002045440 5320003018550 5320005627513 5320010167573 5320010251810 5320010511634 5320010830189 5320010945130 5320011212789 5320011346218 5320011591157 5320011852870 5320011907624 5320011907625 5320011972231 5320012069706 5320012159833 5320012176886 5320012176887 5320012325109 5320012329841 5320012357901 5320012420784 5320012482217 5320012484521 5320012821572 5320012973169 5320012974091 5320013033928 5320013227027 5320013263000 5320013279109 5320013279110 5320013291174 5320013294221 5320013294222 5320013294225 5320013305331 5320013305332 5320013513557 5320013566175 5320013566176 5320013653219 5320013709129 5320014206113 5320014234457 5320014236655 03A081C()-() 03A081C()W() 10246-001 10246-002 10246-003 10246-004 10246-005 10246-006 10246-007 10246-008 10246-010 10246-011 10246-012 10246-013 10246-014 10246-015 10246016 110-195-()C() 110-195-()P() 11501032-01 11501032-03 11501032-05 11501032-07 11501032-11 11501032-13 11501032-15 1150132-1 1150132-11 1150132-13 1150132-15 1150132-3 1150132-5 1150132-7 1395AS365 1395AS365 1395AS365-2 142D6144-1 142D6144-2 142D6144-3 142D6144-4 142D6144-5 142D6144-6 142D6144-7 1PE0119-()-() 25L27-()-() 2881003-10 2881003-11 2881003-12 2881003-13 2881003-14 2881003-15 2881003-16 2881003-2 2881003-3 2881003-4 2881003-5 2881003-6 2881003-7 2881003-8 2881003-9 2JB8-001 2JB8-002 2JB8-003 2JB8-004 2JB8-005 2JB8-006 2JB8-007 305-1089-020 305-1089-100 305-1089-110 305-1089-120 305-1089-130 305-1089-140 305-1089-150 305-1089-160 30B1119 3D0142C()-() 3M949-()-() 4052T00P01 4052T00P02 4052T00P03 4052T00P04 4052T00P05 4086-81002-C() 5632207-4-() 5642064-001 5642064-002 5642064-003 5642064-004 5642064-005 5642064-006 5642064-007 627-513-9002 627-513-9003 627-513-9004
69A47581P12 69A47581P13 69A47581P14 69A47581P15 7548693P1 7548693P2 7548693P3 7704099-1 7704099-2 7704099-3 7704099-4 7704099-5 7704099-6 7704099-7 86-81002-0() 9025M79P01 9025M79P02 9025M79P03 9025M79P04 9025M79P05 9025M79P06 9025M79P07 9025M79P08 9025M79P09 9025M79P10 9025M79P11 9025M79P12 988281-1 988281-2 988281-3 988281-4 988281-5 988281-6 988281-7 ABS0112-24-() ABS0112-24-()C ABS0112-24-()P ABS0112-24-()T ABS0112-32-() ABS0112-32-()C ABS0112-32-()P ABS0112-32-()T B0207017-()-() BACR15DR3A() BACR15DR3A()D BACR15DR3A()L BACR15DR3AC() BACR15DR4A() BACR15DR4A()D BACR15DR4A()L BACR15DR4AC() CAN43019-()CS CSP338-24-() CSP338-32-() G383844-1 G383844-2 G383844-3 G383844-4 G383844-5 G383844-6 GAR501AC3C() GR501AC()C() GR501BC4-() HS5422C3 HS5422C4 HS5612-()A() HS5612-()B() JJ54297 LHE10392 ME121-0014-03() MS20605H()W() MS20605R()W() PAN3633-24-() PAN3
ABS0112-24-() ABS0112-24-()C ABS0112-24-()P ABS0112-24-()T ABS0112-32-() ABS0112-32-()C ABS0112-32-()P ABS0112-32-()T B0207017-()-() BACR15DR3A() BACR15DR3A()D BACR15DR3A()L BACR15DR3AC() BACR15DR4A() BACR15DR4A()D BACR15DR4A()L BACR15DR4AC() CAN43019-()CS CSP338-24-() CSP338-32-() G383844-1 G383844-2 G383844-3 G383844-4 G383844-5 G383844-6 GAR501AC3C() GR501AC()C() GR501BC4-() HS5422C3 HS5422C4 HS5612-()A() HS5612-()B() JJ54297 LHE10392 ME121-0014-03() MS20605H()W() MS20605R()W() PAN3633-24-() PAN3633-32-() PS1-13102-1 PS1-13102-2 PS1-13102-3 PS1-13102-4 PS1-13102-5 PS1-13102-6 PS1-13102-7 RE3090-() ST1209-02 ST1209-03 ST1209-04 ST1209-05 ST1209-06 ST1209-07 ST1209-08 ST25D41-()-() ST3202-02 ST3202-03 ST3202-04 ST3202-05 ST3202-06 Y-1120-6-()
Cherry 3/32" SPR Tool Selection
CHERRY
PART NO.
NSN
NUMBER
BOEING
PART NO.
RIVET GUN
PULLING HEAD
HEAD
ADAPTER
REQUIRED
PULLING HEAD
PART NUMBER
NOSEPIECE
REQUIRED
CR1122-3-02
CR1122-3-03
CR1122-3-04
CR1122-3-05
CR1122FA-3-02
CR1122FA-3-03
CR1122FA-3-04
CR1122FA-3-05
5320-01-459-8511
5320-01-459-8512
5320-01-459-8514
BACR15GR3-2
BACR15GR3-3
BACR15GR3-4
G902
STRAIGHT
-
H902-3NPR
-
G902-15
STRAIGHT
-
H9015-3C
-
G702A
STRAIGHT
-
H702-3NPR
-
G746A
G747
STRAIGHT
STRAIGHT
OFFSET
-
H955-3
H747-3NPR
H782
782-3
INCLUDED
INCLUDED
STRAIGHT
OFFSET
750A-117
750A088
H9055-3
H782
782-3
Cherry is a registered trade name of Cherry Aerospace LLC
All Rights Reserved
Hand Tools
G29
G30
G750A
Cherry MBC ® Blind Rivets Tool Selection
To install these fasteners *
NAS
PART NO.
MBC
PART NO.
AGS
PART NO.
AS
PART NO.
NAS1720H( )-( )A
NAS1720H( )-( )F
NAS1721H( )-( )F
NAS1719H( )-( )F
NAS1721H( )-( )A
NAS1720H( )-( )N
NAS1721H( )-( )N
NAS1720C( )-( )P
NAS1721C( )-( )P
NAS1720C( )-( )W
NAS1721C( )- ( )W
NAS1719C( )- ( )P
NAS1719C( )- ( )W
NAS1719H( )- ( )A
04801
04804
04805
04806
04807
04811
04817
04831
04837
04851
04857
04861
04865
04867
AGS4719-xxx
NAS
PART NO.
MBC
PART NO.
AGS
PART NO.
NAS1720H( )L( )A
04901
AGS4719L-xxx
NAS1720H( )L( )F
04904
NAS1721H( )L( )F
04905
NAS1719H( )L( )F
04906
NAS1721H( )L( )A
04907
NAS1720H( )L( )N
04911
NAS1721H( )L( )N
04917
NAS1720C( )L( )P
04931
AS46789Lxxx
NAS1721C( )L( )P
04937
AS46791Lxxx
NAS1720C( )L( )W
04951
AS46788Lxxx
NAS1721C( )L( )W
04957
AS46790Lxxx
NAS1719C( )L( )P
04961
NAS1719C( )L( )W
04965
NAS1719H( )L( )A
04967
AGS4720-xxx
use these tools
ASNA
PART NO.
DIN
PART NO.
ASNA0080-xxxA
65-158
ASNA0079-xxxA
65-159
AS46789-xxx
AS46791-xxx
AS46788-xxx
AS46790-xxx
CHERRY
RIVET GUN
G704B
G704B-SR
G704B-40SH
G746A
G747
G750
* = without Lock Creator
ASNA0079-xxxA(LC)
** = with Lock Creator
Cherry MBC is a registered trademark of Cherry Aerospace LLC
PULLING HEAD
PART NO.
NOSE TIP
REQUIRED
Straight
Straight
Straight
-
H746A-4MBC
H746A-5MBC
H746A-6MBC
-
-4
Offset
Offset
Offset
-
H782
H782
H782
782-4MBC
782-5MBC
782-6MBC
-4
Offset
Offset
Offset
750A088
750A088
750A088
H782
H782
H782
782-4MBC
782-5MBC
782-6MBC
-4
use these tools
ASNA
PART NO.
ASNA0080-xxxA(LC)
AGS4720L-xxx
ADAPTER
REQUIRED
RIVET DIA MATERIAL
PULLED SUITABILITY
-6
ALL
ALL
ALL
-6
ALL
ALL
ALL
-6
ALL
ALL
ALL
-5
-5
-5
The Avdel Genesis range of tools is no longer recommended by Cherry to install these fasterners
To install these fasteners **
AS
PART NO.
(most popular choices are highlighted)
HEAD
STYLE
CHERRY
RIVET GUN
G704B
G704B-SR
G704B-40SH
G746A
G747
G750A
HEAD
STYLE
ADAPTER
REQUIRED
PULLING HEAD
PART NO.
NOSE TIP
REQUIRED
RIVET DIA MATERIAL
PULLED SUITABILITY
Straight
Offset
-
H701B-456
H782
-
-4, -5, -6
-4, -5, -6
ALL
ALL
Straight
Offset
750A088
included
H782
-
-4, -5, -6
-4, -5, -6
ALL
ALL
The Avdel Genesis range of tools is no longer recommended by Cherry to install these fasterners
Tool Selection for HUCK-CLINCH® Blind Rivets
NAS
PART NO.
HUCK CLINCH
HUCK-CLINCH
PART NO.
MILITARY
PART NO.
NAS9302B
NAS9301B
NAS9303B
NAS9305B
NAS9304B
NAS9306B
HC3212
HC3213
HC3214
HC3242
HC3243
HC3245
HC6222
HC6223
HC6224
HC6252
HC6253
M7885/2
M7885/3
M7885/27
M7885/6
M7885/7
M7885/28
M7885/12
M7885/11
M7885/13
M7885/15
M7885/14
use these tools
RIVET GUN
Huck 2013
G704B
G704B-SR
G704B-40SH
G746A(1)
G747(1)
PULLING HEAD
PART NO.
ADAPTER
Q
REQUIRED
HEAD
STYLE
RIVET DIA
PART NO.
99-1479
99-3442
99-3443
99-1333
99 1333
99 1336
99-1336
99-1334
99
1334
-
Straight, Short
Straight
Straight, Long
Offset,
Single
Jaw
Off t Si
l J
Offset Double Jaw
Offset,
90°
90
-4, -5, -6
-4, -5, -6
-4, -5, -6
-4,
4 -5,
5 -6
6
4 -5,
5 -6
6
-4,
-4
4, -5
5, -6
6
H701B-456
H753A-456
H782
-
Straight
90°
Offset
-4, -5, -6
-4, -5, -6
-4, -5, -6
- not to be used for cross
cross-referencing
referencing fas
gp
g
Where tool p
part number is underlined in blue - click for catalog
page
(1) G746A & G747 are not recommended for 3/16" diameter Huck-Clinch
HUCK CLINCH iis a registered
HUCK-CLINCH
i
d trade
d name off Al
Alcoa F
Fastening
i S
Systems
All Ri
Rights
Reserved
ht R
d
Tool Selection for MLS / NAS 1919 / NAS1921 Double Action Blind Rivets
NAS
PART NO.
HUCK
PART NUMBERS
NAS1919B( )-( )( )
NAS1919C( )-( )( )
NAS1919M( )-( )( )
MLSPB( )-( ) ( )
MLSPEU( )-( ) ( )
MLSPM( )-( ) ( )
NAS1921B( )-( ) ( )
NAS1921C( )-( ) ( )
NAS1921M( )-( ) ( )
MLS100B( )-( ) ( )
MLS100EU( )-( ) ( )
MLS100M( )-( ) ( )
IMPORTANT:
POWER
TOOL
NOSE ASSEMBLY
STYLE
-04
200
IN-LINE
99-1013
NOSE ASSEMBLY PART NUMBER
FOR RIVET DIAMETER
-05
-06
99-458
99-459
-08
99-740(1)
Note (1): 99-740 head on 200 tool suitable for Aluminum double action rivets only.
For 1/4" Monel & A286 Double Action Rivets use 99-1311 nose
assembly on 245 Pneudraulic Tool or 2503/A2503 Hydraulic Tool
The tools on this page are only suitable for use with double action NAS1919
and NAS1921 rivets (indicated by the code "-" between dia. and grip codes)
Tooling for NAS 1919 and NAS 1921 single action rivets
(indicated by "S" between dia. code and grip code) click here
Tooling for single action rivets with integral drive washer
(indicated by code "U" at end of NAS or MLS part number) click here
Where Tool part number is underlined in blue - click for catalog page
All Rights Reserved
Tool Selection for MLS / Unimatic® Blind Rivets without Drive Washer
NAS
PART NO.
HUCK
PART NUMBERS
NAS1919B( )S( )( )
NAS1919C( )S( )( )
NAS1919M( )S( )( )
NAS1921B( )S( ) ( )
NAS1921C( )S( ) ( )
NAS1921M( )S( ) ( )
POWER
TOOL
NOSE ASSEMBLY
STYLE
-04
SMLSPB( )-( ) ( )
SMLSPEU( )-( ) ( )
SMLSPM( )-( ) ( )
202
IN-LINE SHORT
IN-LINE STANDARD
IN-LINE LONG
99-2724
99-2725
99-2726
99-2730
99-2731
99-2732
99-2736
99-2737
99-2738
SMLS100B( )-( ) ( )
SMLS100EU( )-( ) ( )
SMLS100M( )-( ) ( )
2012
IN-LINE SHORT
IN-LINE STANDARD
IN-LINE LONG
99-2724
99-2725
99-2726
99-2730
99-2731
99-2732
99-2736
99-2737
99-2738
2025
IN-LINE SHORT
IN-LINE STANDARD
IN-LINE LONG
99-2724
99-2725
99-2726
99-2730
99-2731
99-2732
99-2736
99-2737
99-2738
99-2742
99-2743
99-2744
99-2724
(1)
99-2725
(1)
99-2726
(1)
99-2730(1)
99-2731(1)
99-2732(1)
99-2736(1)
99-2737(1)
99-2738(1)
99-2745
99-2746
99-2747
99-3715
99-3715-1(2)
(2)
99-3716(2)
99-3716-1(2)
99-3717(2)
99-3717-1(2)
704BR
705BR
706BR
OSMLSPB( )-( ) ( )
OSMLSPEU( )-( ) ( )
OSMLSPM( )-( ) ( )
OSMLS100B( )-( ) ( )
OSMLS100EU( )-( ) ( )
OSMLS100M( )-( ) ( )
245
IMPORTANT NOTE:
The tools on this page are only suitable for use with single action NAS1919
and NAS1921 rivets (indicated by the code S between dia. and grip codes)
and Unimatic® rivets which do not have an integral drive washer
IN-LINE SHORT
IN-LINE STANDARD
IN-LINE LONG
244OS
& 206-375 Hydr.
1" OFFSET
1-3/8" OFFSET
Tooling for NAS 1919 and NAS 1921 double action rivets
(indicated by "–" between dia. code and grip code) click here
Manual Tools:
SELF CONTANED (Integral Nose Assembly)
Tooling for single action rivets with integral drive washer
(indicated by code "U" at end of NAS or MLS part number) click here
Unimatic® is a registered trademark of Alcoa Fastening Systems
All Rights Reserved
NOSE ASSEMBLY PART NUMBER
FOR RIVET DIAMETER
-05
-06
FIELD REPAIR
(Equipped with individual
diameter inserts)
-08
HK-150-456
Notes:
(1) Requires 102463 adapter
(2) Offset heads can also be used on 245 tool with 119400-1 adapter and 118362 stroke limiter
Tool Selection for MLS / UNIMATIC ® with Drive Washer
NAS
PART NO.
HUCK
PART NUMBERS
HUCK OVERSIZE
PART NUMBERS
POWER
TOOL
NOSE ASSEMBLY
STYLE
NOSE ASSEMBLY
PART NUMBER
RIVET DIAMETER
PULLED
NAS1919B( )S( )U
NAS1919C( )S( )U
NAS1919M( )S( )U
SMLSPB( )-( )U
SMLSPEU( )-( )U
SMLSPM( )-( )U
OSMLSPB( )-( )U
OSMLSPEU( )-( )U
OSMLSPM( )-( )U
202
HEAVY DUTY STANDARD
HEAVY DUTY LONG
99-3458-202
99-3459-202
–04, –05, –06,
–04, –05, –06,
NAS1921B( )S( ) U
NAS1921C( )S( ) U
NAS1921M( )S( ) U
SMLS100B( )-( )U
SMLS100EU( )-( )U
SMLS100M( )-( )U
OSMLS100B( )-( )U
OSMLS100EU( )-( )U
OSMLS100M( )-( )U
HEAVY DUTY STANDARD
HEAVY DUTY LONG
1" OFFSET, STD DUTY
90 DEG ANGLE, STD DUTY
99-3458-202
99-3459-202
99-3466
99-3467
–04, –05, –06,
–04, –05, –06,
–04, –05, –06,
–04, –05, –06,
IMPORTANT NOTE:
The tools on this page are only suitable for use with single action rivets
which have an integral drive washer (indicated by the code letter U
at the end of the NAS or MLS part number)
2012
In the interest of long tool life, Offset and 90° Angle nose assemblies
should only be used when access limitations require them.
Durability of straight tools is a multiple of that for limited access tools
NAS 1919 and NAS 1921 double action rivets (indicated by "–" in place of
"S" between dia. code and grip code) require a double action tool
Tooling for single action rivets without integral drive washer
(with "S" between dia. & grip codes but no code letter "U"
at end of NAS or MLS part number) click here
Unimatic® is a registered trademark of Alcoa Fastening Systems
All Rights Reserved
Decision Process for
‘pull-type’ Blind Bolt
tooling selection
Start here
CR7680S
CR7683S, CR7684S, CR7686S
CR7784S, EN6122, EN6127, EN6128,
EN6129, UABP, UAB100
UAB130, UAB6127
?
Yes
No
CR7310S
CR7311S, CR7340S
CR7341S, CR7620S, CR7621S
CR7626S, CR7650S, CR7651S, CR7670S
CR7671S, CR7770S, CR7771S
CR7773S, CR7774S
?
Yes
No
CR7310CR7311-, CR7340CR7341-, CR7620-, CR7621-, CR7626CR7650-, CR7651?
Diameter
-08, -10, -12
?
Yes
Yes
No
No
CR7310U
CR7311U, CR7620U, CR7621U
CR7340U, CR7341U, CR7650U, CR7651U,
CR7770U, CR7771U, CR7773U
CR7774U
?
Yes
No
UBP
UB100, U4B100, UB130, OUBP, OUB100,
OU4B100, OU7B100
?
Yes
No
MS90353S
MS90354S, MS21140S, MS21141S
MS90353U, MS90354U, MS21140U,
MS21141U
?
Yes
W code
at end of part
number ?
No
Yes
No
MS90353MS90354-, MS21140MS21141?
No
Call Wesco for
assistance
Yes
Diameter
-5 or -6 ?
No
Yes
Huck 200 &
99-600 for -5
99-589 for -6
U-Type
tooling selection
Blunt nose
tooling selection
Huck 244 & 99-3482
Huck 245 & 99-3483
Cherry G84 & H84B-568
Tool Selection for Double Action Blind Bolts
MS
PART NO.
MS90353-05(
MS90353-06(
MS90354-06(
MS90354-05(
MS21140-05-(
MS21140-06-(
MS21141-05-(
MS21141-06-(
HUCK
PART NO.
)
)
)
)
)
)
)
)
B100-T05-( )
B100-T06-( )
BP-T05-( )
BP-T06-( )
B100-EU05-( )
B100-EU06-( )
BP-EU05-( )
BP-EU06-( )
use these tools
CHERRY
PART NO.
CR7310-05-(
CR7310-06-(
CR7311-05-(
CR7311-06-(
CR7620-05-(
CR7620-06-(
CR7621-05-(
CR7621-06-(
POWER TOOL
PART NUMBER
)
)
)
)
)
)
)
)
HUCK 200
STYLE
-5
-6
In Line Medium
In Line Long
99-600
99-600-1
99-589
99-589-1
IMPORTANT NOTE
The tools on this page are only applicable to Double Action blind bolts
(indicated by "-" after basic part number in -05 and -06 diameters only)
For "U" code single action blind bolts click here
For "S" code single action blind bolts click here
This Table provided for tool selection only not to be used for cross-referencing fasteners.
All Rights Reserved
Tool Selection for Blind Bolts with Drive Washer (e.g. Cherry MaxiBOLT®)
MS
PART NO.
NO
CHERRY
PART NO.
NO
HUCK
PART NO.
NO
BOEING
PART NO.
NO
RIVET GUN
HEAD
STYLE
ADAPTER
REQUIRED
Straight
90°
Offset
Straight
Offset
Straight
Straight Heavy Duty
90°
Off t
Offset
Straight
g
Offset
Straight
Straight Hvy
Hvy. Duty
90°
Offset
Straight
g
Straight
90°
744-300
744-300
-
Offset
560-070
-4
4
-5
5
H701B-456
H753A
456
H753A-456
H782
H701B-456
H782
H701B-456
H753A
456
H753A-456
H782(6)
PULLING HEAD
-6
-8
6
8
-10
10
-12
12
CHERRY AEROSPACE
MS90353S
MS90354S
MS21140S
MS21141S
CR7310S
CR7311S
CR7620S
CR7621S
CR7340S
If part is procured only
CR7341S
by MS part number,
check that Drive
CR7650S
Washer is present.
present
CR7651S
If no Drive Washer use
CR7770S
insert for 'U' type(see
below)
CR7771S
CR7773S
CR7774S
SB100-T
SBP
T
SBP-T
SB100
EU
SB100-EU
SBP-EU
G747(1) / G704B
G83
(2)
/ G84
BACB30YY
BACB30YU
BACB30YT
G84-LS
(1) May
M require
i 95 PSI to
t install
i t ll -5
5 dia.
di
G87D / G85D-S
((2)) Suitable for -4, -5 and -6 only.
y
(3) H83B-xMB replaces H83A-xMB (threaded insert)
H83 (without ‘A’ or 'B' designation) has press fit insert now obsolete.
744-200
744 200
744-200
744-600
744-600
744-700
744-700
744
700
744-500
744-500
552
560-070
H782(6)
(3)
H83B-6MB(3)
H83B-5MB
H828-5MB
H701B-456
H782
H828-6MB
H856 6MB
H856-6MB
H782(6)
(3)
H83B-6MB(3)
H83B-5MB
H828-5MB
H84A-8MB
H84C-8MB
( )
H83B-5MB
H83B 5MB(3)
H828-6MB
H856-6MB
( )
H83B-6MB
H83B 6MB(3)
H828-5MB
H828-6MB
H84A-8MB
H84C 8MB
H84C-8MB
H652-8MB
H856-6MB
(4) Huck Nose Assembly compatible with Cherry G84-LSR tool
(5) For -12 diameter use Huck 246 or 2502 only
(6) For -5 dia "U" type bind bolt use insert 782-5BB
Inserts to convert Cherry
y Maxibolt Heads to "U" - type
yp
PULLING HEAD
INSERT
PULLING HEAD
H83-5MB
H83 5MB
530-203-5
530 203 5
H83B-5MB
H83B 5MB
INSERT
652-066
652 066
H83-6MB
530-203-6
H83B-6MB
652-067
H84-8MB
652-008
H84A-8MB
652-065
H83A-5MB
652-063
H84C-8MB
652-106
H83A-6MB
652-064
H828-5MB
828
035
828-035
H744-5MB
530-203-5
H828-5MB
828-036
H744-6MB
530-203-6
H652-8MB
652-002
g head,, spare
p
p
= obsolete p
pulling
parts still available
To order Huck nose assemblies for "U" type blind bolts
- omit the W suffix on each p
part number
HUCK - ALCOA FASTENING SYSTYEMS
Straight, Short
202 / 2012 / 244
Straight, Regular
Straight
Straight,
g , Long
g
244OS
206-375
206 375 (Hydr.*)
(H d *)
2025
2480(Hydr.*)
2480(Hydr. )
Offset
Additional
Additi
l Offset
Off t
Straight, Short
Straight, Regular
Straight, Long
Straight,
102463
Straight Short
Straight, Regular
102463
245 / 255 / 246 / 256
Straight, Long
102463
2502 / 2503 (H
d *)
St
i ht Sh
(Hydr.*)
Straight,
Shortt
g , Regular
g
Straight,
Straight, Long
Offset
119400-1
Additional Offset
119400-1
* Hydraulic Tools require separate power unit
99-2700W
99-2701W
99
2701W
99-2702W
99-2706W
99-2707W
99
2707W
99-2708W
99-3712W
99-3713W
99-3714W
99-3712-1W
99 3712 1W 99-3713-1W
99 3713 1W 99-3714-1W
99 3714 1W
99 2700W
99 2706W
99 2712W
99-2700W
99-2706W
99-2712W
99-2701W
99-2707W
99-2713W
99-2702W
99-2700W
99 2700W
99-2701W
99-2702W
99
2703W
99-2703W
99-2708W
99-2706W
99 2706W
99-2707W
99-2708W
99
2709W
99-2709W
99-2714W
99-2712W
99 2712W
99-2713W
99-2714W
99
2715W
99-2715W
99-2704W
99-2710W
99-2716W
99-2705W
99-2711W
99-2717W
99-3712W
99-3713W
99-3714W
99-3712-1W 99-3713-1W 99-3714-1W
MaxiBOLT is a registered trade name of Cherry Aerospace LLC
All Rights
Reserved
g
2721W(5)
99
2718W 99
99-2721W
99-2718W
(5)
99-2719W 99-2722W
(5)
99-2720W 99-2723W
Interchangeability:
g
y
Pulling heads designed for Cherry G83/G84 tools are also compatible with Huck 244 tools, and vice-versa
Pulling heads designed for Cherry G85D S/G87D tools are also compatible with Huck 245 & 246 tools and vice versa
Tool Selection for Cherry MaxiBOLT Plus & Huck UAB
CHERRY
MAXIBOLT PLUS
PART NO.
EN
PART NO.
CR7680S
CR7683S
CR7684S
CR7686S
EN6128C
EN6129C
EN6122C
EN6127C
EN6129T
CR7784S
EN6122T
HUCK
UAB
PART NO.
UAB100-EU
UABP-EU
UAB130-EU
UAB6127-EU
UABP-MV
UAB100-MV
UAB130-MV
* = Hydraulic tool requiring separate power unit
RIVET GUN
PULLING HEAD
PART NO.
ADAPTER
REQUIRED
HEAD
STYLE
FASTENER
DIA.
CHERRY
G83
H84B-568
-
Straight
g
-5, -6
CHERRY
G84
H84B-568
H828-56MBP
744-200
Straight
Right Angle
-5, -6, -8
-5, -6
CHERRY
G84-LS
H84B-568
H828-56MBP
744-700
744-500
Straight
Right Angle
-5, -6, -8
-5, -6
HUCK
244
99-3482
-
Straight
-5, -6
99-3483
-
Straight
-5, -6, -8
99-3482
-
Straight
-5, -6, -8
MAXIBOLT PLUS is a registered trade name of Cherry Aerospace LLC
UAB is a registered trade name of Alcoa Fastening Systems
All Rights Reserved
HUCK 245
255 / 246 / 256
2502* / 2503*
HUCK
2025
2480*
Where Tool part number is underlined in blue - click for
f catalog page
Tool Selection for U-Type (UNIMATIC® and TI-MATIC®) Blind Bolts
HUCK
PART NO.
MS
PART NO.
use these tools
CHERRY
PART NO.
POWER TOOL
PART NUMBER
PULLING HEAD
STYLE
ADAPTER
REQUIRED
-6
-8
-10
HUCK 202 / 2012
In Line Short
In Line Medium
In Line Long
99
2700
99-2700
99-2701
99-2702
99
2706
99-2706
99-2707
99-2708
HUCK 244
In Line Short
In Line Medium
In Line Long
99-2700
99 2701
99-2701
99-2702
99-2706
99 2707
99-2707
99-2708
HUCK 244OS
206-375(3)
Offset
Additional Offset
99-3712
99
3712
99-3712-1
99-3713
99
3713
99-3713-1
99-3714
99
3714
99-3714-1
HUCK 2025
2480(3)
Straight,
g , Short
Straight, Regular
Straight,
Long
St i ht L
99-2700
99-2701
99-2702
99 2702
99-2706
99-2707
99-2708
99 2708
99-2712
99-2713
99-2714
99 2714
HUCK 245
255 / 246 / 256
2502 / 2503 (3)
In Line Short
In Line Medium
In Line Long
In Line Short
In Line Medium
In Line Long
Off t
Offset
99-2700
99-2701
99-2702
99-2703
99-2704
99-2705
99 3712
99-3712
99-2706
99-2707
99-2708
99-2709
99-2710
99-2711
99 3713
99-3713
99-2712
99-2713
99-2714
99-2715
99-2716
99-2717
99 3714
99-3714
99-3712-1
99-3713-1
99-3714-1
H83B-6MB(2)
H84A-8MB(2)
(2)
H84C-8MB
H84C
8MB
-5
-12
70
UB100
T
UB100-T
U4B100-T
OUB100-T
OU4B100-T
UBP-T
OUBP T
OUBP-T
UB100-EU
U4B100-EU
U4B100-EU
U4B100
EU
OUB100-EU
OU4B100-EU
OU7B100-EU
UBP-EU
OUBP-EU
OUBP EU
UB100-MV
UB130-MV
UBP-MV
UB100-EV
UB130-EV
UBP-EV
MS90353U
MS90354U
MS21140U
MS21141U
CR7310U
CR7311U
CR7620U
CR7621U
W suffix
Wh MS Part
P t Number
N b or H
kP
b h
When
Huck
Partt N
Number
has W
suffix after grip length, to indicate presence of drive
washer,
washer a blunt nose tool is required - add suffix W to
Huck Pulling Head number or use 126266-xx blunt insert
or Cherry MaxiBolt tool below right.
Thi Table
T bl provided
id d for
f tool
t l selection
l ti only
l nott to
t be
b used
d for
f cross-referencing
f
i fasteners.
f t
This
Additional Offset
Notes
(1) For -12 diameter use Huck 246 / 256 or 2502 only
(2) Pulling head for Cherry MaxiBOLT 'S' Type Blind Bolt, insert required:
CHERRY
G704B
Inserts to convert Cherry Maxibolt Heads to "U" - type
PULLING HEAD
INSERT
PULLING HEAD
H83-5MB
530-203-5
H83B-5MB
INSERT
652-066
H83-6MB
H83 6MB
530-203-6
530 203 6
H83B-6MB
H83B 6MB
652-067
652 067
H84-8MB
652-008
H84A-8MB
652-065
H83A-5MB
652-063
H84C-8MB
652-106
H83A
6MB
H83A-6MB
652
064
652-064
H828
5MB
H828-5MB
828
035
828-035
H744-5MB
530-203-5
H828-5MB
828-036
H744-6MB
530-203-6
H652-8MB
652-002
Except
if p
part number has suffix W
p insert is NOT required
q
after Grip length to indicate presence of drive Washer
(3) H
Hydraulic
d li ttooll requiring
i i separate
t power unitit
(4) Requires 782-5BB Nosepiece
(5) G83 suitable for -5 and -6 only
=obsolete pulling heads,
spare parts still available
Unimatic® & Ti-Matic® are registered trademarks of Alcoa Fastening Systems
CHERRY
G83(5) / G84
CHERRY
G84-LS
G84 LS
CHERRY
G85D-S
G85D S / G87D
CHERRY
G750A
102463
102463
102463
119400 1
119400-1
119400-1
Offset
H782(4)
Straight
Straight Heavy Duty
H83B-5MB(2)
99-2718
99-2719
99-2720
99-2721(1)
99-2722(1)
99-2723(1)
(4)
Offset
90°
Straight
744-300
744-200
744 200
744-700
Straight Hvy. Duty
Offset
90°
Straight
90°
90
744-700
744-600
744 600
744-500
552
560-070
560 070
H782(4)
H828-5MB(2)
H83B-5MB(2)
(2)
H828-5MB
H828 5MB
Offset
750A088
H782(4)
H782
(2)
H828-5MB
H828
5MB
H83B-5MB(2)
(2)
H828-6MB
H828 6MB
H83B-6MB(2)
H84A-8MB(2)
H84C-8MB(2)
H828-6MB(2)
H83B-6MB(2)
(2)
H828-6MB
H828
6MB
H84A-8MB(2)
Interchangeability:
Pulling heads designed for Cherry G83/G84 tools are also compatible with Huck 244 tools
tools, and vice
versa
vice-versa
Pulling heads designed for Cherry G85D-S/G87D tools are also compatible with Huck 245 & 246 tools, and vice-versa
MaxiBOLT is a registered trade name of Textron Aerospace Fasteners
All Rights
g
Reserved
Tool Selection for Visulok Protruding Head (Hex) Fasteners
NAS
PART NO.
MONOGRAM
PART NUMBERS
NAS1669-( )L( )
NAS1751-( )L( )
PLT210-( )-( )
PLT211-( )-( )
PLT214-( )-( )
PLT215-( )-( )
PLT220-( )-( )
PLT221-( )-( )
PLT225-( )-( )
PLT230-( )-( )
PLT231-( )-( )
PLT250-( )-( )
PLT251-( )-( )
PLT254-( )-( )
PLT270-( )-( )
PLT270X-( )-( )
PLT275X-( )-( )
NAS1671-( )L( )
NAS1753-( )L( )
NAS1673-( )L( )
NAS1755-( )L( )
use these tools
TOOL
MANUFACTURER / STYLE
MONOGRAM TOOLS
PNEUMATIC, PISTOL GRIP
PNEUMATIC, RIGHT ANGLE
PNEUMATIC, CLOSE QUARTER
RIGHT ANGLE, TORQUE RESPONSIVE
RATCHET HAND TOOL
CLOSE QUARTER HAND TOOL
FASTENER DIAMETER
1/4"
5/32"
3/16"
MP550P-5AA
MR550P-5AA
MRC550P-5AA
MRT550P-5AA
MH75P-5AA
MHC75P-5AA
MP550P-6AA
MR550P-6AA
MRC550P-6AA
MRT550P-6AA
MH75P-6AA
MHC75P-6AA
MP550P-8AA
MR550P-8AA
MRC550P-8AA
MRT550P-8AA
MH75P-8AA
MHC75P-8AA
LOKFAST TOOLS
RATCHET HAND TOOL
S540MTD-5P
7440-5P
7440C-5P
7440M-5P
HWP165
HWP5
S540MTD-6P
7440-6P
7440C-6P
7440M-6P
HWP200
HWP6
S540MTD-8P
7440-8P
7440C-8P
7440M-8P
HWP260
HWP8
5/16"
3/8"
MP550P-10AA
MP550P-12AA
MR550P-10AA
MR550P-12AA
MRC550P-10AA MRC550P-12AA
MRT550P-10AA MRT550P-12AA
MH75P-10AA
MH75P-12AA
MHC75P-10AA MHC75P-12AA
S540MTD-10P
S540MTD-12P
HWP312
HWP10
HWP375
HWP12
LOKFAST TOOL KITS
(INCLUDE TOOLS FOR MULTIPLE DIAMETERS & NOSES FOR OTHER FASTENER HEAD STYLES)
4000 KIT
RATCHET HAND TOOL
This table for tool selection only,
not for use in cross-referencing fasteners
4070 KIT
4090 KIT
Note that diameter codes in PLT part numbers are not
the same as diameter codes in NAS numbers
Note that the original Jo-Bolt & Visulok fasteners require
different tooling for each fastener head style.
Visulok II® & Acculok® fasteners use a disposable
Drive Nut and require only a single tool for each
diameter that is applicable to all head styles
BACB30GF(*)
3M992(*)
ASNA0081-(*)Y
DIN29924(*)
BACB30JF(*)
LS8892F(*)
BACB30JR(*)
ASNA0081A(*)Y
BACB30GH(*)
3M987(*)
ASNA0082-(*)Y
BACB30JG(*)
LS8892P(*)
650-089-3(*)-0
BACB30JS(*)
650-089-3(*)-1
Tool Selection for Visulok Flush Fasteners
NAS
PART NO.
MONOGRAM
PART NUMBERS
NAS1670-( )L( )
NAS1750-( )L( )
PLT110-( )-( )
PLT111-( )-( )
PLT114-( )-( )
PLT115-( )-( )
PLT120-( )-( )
PLT121-( )-( )
PLT125-( )-( )
PLT150-( )-( )
PLT151-( )-( )
PLT170-( )-( )
PLT170X-( )-( )
NAS1672-( )L( )
NAS1752-( )L( )
use these tools
TOOL
MONOGRAM TOOLS
RATCHET HAND TOOL
5/32"
3/16"
MP550F-5AA
MR550F-5AA
MRC550F-5AA
MRT550F-5AA
MH75F-5AA
MHC75F-5AA
MP550F-6AA
MR550F-6AA
MRC550F-6AA
MRT550F-6AA
MH75F-6AA
MHC75F-6AA
MP550F-8AA
MR550F-8AA
MRC550F-8AA
MRT550F-8AA
MH75F-8AA
MHC75F-8AA
LOKFAST TOOLS
RATCHET HAND TOOL
S540MTD-5
7440-5
7440C-5
7440M-5
HWF165
HWF5
S540MTD-6
7440-6
7440C-6
7440M-6
HWF200
HWF6
S540MTD-8
7440-8
7440C-8
7440M-8
HWF260
HWF8
FASTENER DIAMETER
1/4"
5/16"
3/8"
MP550F-10AA
MP550F-12AA
MR550F-10AA
MR550F-12AA
MRC550F-10AA MRC550F-12AA
MRT550F-10AA MRT550F-12AA
MH75F-10AA
MH75F-12AA
MHC75F-10AA MHC75F-12AA
S540MTD-10
S540MTD-12
HWF312
HWF10
HWF375
HWF12
LOKFAST TOOL KITS
4000 KIT
RATCHET HAND TOOL
4070 KIT
4090 KIT
BACB30GF(*)
3M992(*)
ASNA0081-(*)Y
DIN29924(*)
BACB30JF(*)
ABS0223(*)
HS5478-06(*)
HS5447(*)
HS5448(*)
ASNA0081C(*)Y
LS8892F(*)
BACB30JR(*)
ASNA0081A(*)Y
ST3M782(*)
ASNA0081B(*)Y
Tool Selection for Visulok Millable Head Fasteners
NAS
PART NO.
use these tools
MONOGRAM
PART NUMBERS
NAS1674-( )L( )
NAS1754-( )L( )
PLT130-( )-( )
PLT131-( )-( )
TOOL
MONOGRAM TOOLS
RATCHET HAND TOOL
FASTENER DIAMETER
1/4"
5/32"
3/16"
MP550A-5AA
MR550A-5AA
MRC550A-5AA
MRT550A-5AA
MH75A-5AA
MHC75A-5AA
MP550A-6AA
MR550A-6AA
MRC550A-6AA
MRT550A-6AA
MH75A-6AA
MHC75A-6AA
MP550A-8AA
MR550A-8AA
MRC550A-8AA
MRT550A-8AA
MH75A-8AA
MHC75A-8AA
LOKFAST TOOLS
RATCHET HAND TOOL
S540MTD-5A
7440-5A
7440C-5A
7440M-5A
HWA165
HWA5
S540MTD-6A
7440-6A
7440C-6A
7440M-6A
HWA200
HWA6
S540MTD-8A
7440-8A
7440C-8A
7440M-8A
HWA260
HWA8
5/16"
3/8"
LOKFAST TOOL KITS
4000 KIT
RATCHET HAND TOOL
4070 KIT
4090 KIT
BACB30GF(*)
3M992(*)
ASNA0081-(*)Y
DIN29924(*)
BACB30JF(*)
LS8892F(*)
BACB30JR(*)
ASNA0081A(*)Y
BACB30GH(*)
3M987(*)
ASNA0082-(*)Y
BACB30JG(*)
LS8892P(*)
650-089-3(*)-0
BACB30JS(*)
650-089-3(*)-1
Tool Selection for Visulok Reduced Flush (Shear) Fasteners
NAS
PART NO.
use these tools
MONOGRAM
PART NUMBERS
PLT1058-( )-( )
TOOL
MONOGRAM TOOLS
RATCHET HAND TOOL
FASTENER DIAMETER
1/4"
5/32"
3/16"
MP550R-5AA
MR550R-5AA
MRC550R-5AA
MRT550R-5AA
MH75R-5AA
MHC75R-5AA
MP550R-6AA
MR550R-6AA
MRC550R-6AA
MRT550R-6AA
MH75R-6AA
MHC75R-6AA
MP550R-8AA
MR550R-8AA
MRC550R-8AA
MRT550R-8AA
MH75R-8AA
MHC75R-8AA
LOKFAST TOOLS
RATCHET HAND TOOL
S540MTD-5T
7440-5T
7440C-5T
7440M-5T
HWT165
HWT5
S540MTD-6T
7440-6T
7440C-6T
7440M-6T
HWT200
HWT6
S540MTD-8T
7440-8T
7440C-8T
7440M-8T
HWT260
HWT8
5/16"
3/8"
MP550R-10AA
MP550R-12AA
MR550R-10AA MR550R-12AA
MRC550R-10AA MRC550R-12AA
MRT550R-10AA MRT550R-12AA
MH75R-10AA
MH75R-12AA
MHC75R-10AA MHC75R-12AA
S540MTD-10T
S540MTD-12T
HWT312
HWT10
HWT375
HWT12
LOKFAST TOOL KITS
4000 KIT
RATCHET HAND TOOL
4070 KIT
4090 KIT
BACB30GF(*)
3M992(*)
ASNA0081-(*)Y
DIN29924(*)
BACB30JF(*)
LS8892F(*)
BACB30JR(*)
ASNA0081A(*)Y
BACB30GH(*)
3M987(*)
ASNA0082-(*)Y
BACB30JG(*)
LS8892P(*)
650-089-3(*)-0
BACB30JS(*)
650-089-3(*)-1
Tool Selection for Visulok II ® & Acculok ® Fasteners
NAS
PART NO.
NAS1670-( )DL( )
NAS1750-( )DL( )
NAS1672-( )DL( )
NAS1752-( )DL( )
NAS1674-( )DL( )
NAS1754-( )DL( )
NAS1669-( )L( )
NAS1751-( )L( )
NAS1671-( )L( )
NAS1753-( )L( )
NAS1673-( )L( )
NAS1755-( )L( )
MONOGRAM
PART NUMBERS
PLT5110-( )-( )
PLT5111-( )-( )
PLT5114-( )-( )
PLT5115-( )-( )
PLT5120-( )-( )
PLT5121-( )-( )
PLT5125-( )-( )
PLT5130-( )-( )
PLT5131-( )-( )
PLT5150-( )-( )
PLT5151-( )-( )
PLT5170-( )-( )
PLT5170X-( )-( )
PLT5210-( )-( )
PLT5211-( )-( )
PLT5214-( )-( )
PLT5215-( )-( )
PLT5220-( )-( )
PLT5221-( )-( )
PLT5225-( )-( )
PLT5230-( )-( )
PLT5231-( )-( )
PLT5250-( )-( )
PLT5251-( )-( )
PLT5254-( )-( )
PLT5270-( )-( )
PLT5270X-( )-( )
PLT5275X-( )-( )
PLT5410-( )-( )
PLT5420-( )-( )
PLT5470-( )-( )
PLT5471-( )-( )
PLT5472-( )-( )
use these tools
TOOL
MONOGRAM TOOLS
RATCHET HAND TOOL
MP550BFVDN-5AA
MR550DN-5AA
MRC550DN-5AA
MRT550DN-5AA
MH75DN-5AA
MHC75DN-5AA
LOKFAST TOOLS
RATCHET HAND TOOL
DN5AA
DNR5AA
DNRC5AA
DNRT5AA
DNH5AA
DNHC5AA
DN6AA
DNR6AA
DNRC6AA
DNRT6AA
DNH6AA
DNHC6AA
DN8AA
DNR8AA
DNRC8AA
DNRT8AA
DNH8AA
DNHC8AA
BTA2000-5-375
BTA3173-5-375
BTA2000-6-375
BTA3173-6-375
BTA2000-8-375
BTA3173-6-375
5/32"
3/16"
FASTENER DIAMETER
1/4"
5/16"
3/8"
MR550BFVDN-6AA MP550BFVDN-8AA MP550BFDN-10AA MP550BFP-12AA
MR550DN-6AA
MR550DN-8AA
MRC550DN-6AA
MRC550DN-8AA
MRT550DN-6AA
MRT550P-8AA
MH75DN-6AA
MH75DN-8AA
MH75DN-10AA
MH75DN-12AA
MHC75DN-6AA
MHC75DN-8AA
MHC75DN-10AA
MHC75DN-12AA
DN10AA
DNR10AA
DNRC10AA
DNRT10AA
DNH10AA
DNHC10AA
DN12AA
DNH12AA
DNHC12AA
ALCOA FASTENING SYSTEMS
PNEUMATIC, 17º ANGLE HEAD
ASNA0081C(*)Z
ST3M770(*)SUB
ASNA0081-5(*)Z
HS5450(*)DL
ST3M782(*)SUB
3D0212N(*)-(*)
ASNA0081-6(*)Z
ST3M790(*)SUB
ASNA0081B(*)Z
ST3M781(*)SUB
ASNA0081-2(*)Z
ASNA0082B2(*)Z
3M987(*)SUB
CAN43084(*)
ASNA0081-3(*)Z
ASNA0082B5(*)Z
ASNA0082-(*)Z
3D0212N(*)X(*)
ASNA0081-4(*)Z
ASNA0082B3(*)Z
ASNA0082A(*)Z
ST3M836(*)SUB
ASNA0081A(*)Z
ASNA0082B4(*)Z
Tool Selection for Composilok Hex Head Fasteners
MONOGRAM
PART NUMBERS
OEM
AIRBUS ASNA0017
ABS0255
MBF2011-( )-( )
BOEING 3M1068
3M1241
BACB30VL
LOCKHEED C9784
MARTIN 491B0700024
use these tools
TOOL
MONOGRAM TOOLS
RATCHET HAND TOOL
5/32"
3/16"
FASTENER DIAMETER
1/4"
MP550BFP-5AA
MR550BFP-5AA
MRC550BFP-5AA
MRT550BFP-5AA
MH75BFP-5AA
MHC75BFP-5AA
MP550BFP-6AA
MR550BFP-6AA
MRC550BFP-6AA
MRT550BFP-6AA
MH75BFP-6AA
MHC75BFP-6AA
MP550BFP-8AA
MR550BFP-8AA
MRC550BFP-8AA
MRT550BFP-8AA
MH75BFP-8AA
MHC75BFP-8AA
LOKFAST TOOLS
RATCHET HAND TOOL
S540MTD5P-BF
7440C5P-BF
7440M5P-BF
HWP165-BF
HWP5-BF
S540MTD6P-BF
7440C6P-BF
7440M6P-BF
HWP200-BF
HWP6-BF
S540MTD8P-BF
7440C8P-BF
7440M8P-BF
HWP260-BF
HWP8-BF
5/16"
3/8"
MP550BFP-10AA
MP550BFP-12AA
MH75BFP-10AA
MHC75BFP-10AA
MH75BFP-12AA
MHC75BFP-12AA
S540MTD10P-BF
S540MTD12P-BF
HWP312-BF
HWP10-BF
HWP375-BF
HWP12-BF
LOKFAST TOOL KITS
CLHK-101
RATCHET HAND TOOL
RIGHT ANGLE, TORQUE DRIVER
4060 KIT
4080 KIT
ASNA0081C(*)Z
ST3M770(*)SUB
ASNA0081-5(*)Z
HS5450(*)DL
ST3M782(*)SUB
3D0212N(*)-(*)
ASNA0081-6(*)Z
ST3M790(*)SUB
ASNA0081B(*)Z
ST3M781(*)SUB
ASNA0081-2(*)Z
ASNA0082B2(*)Z
3M987(*)SUB
CAN43084(*)
ASNA0081-3(*)Z
ASNA0082B5(*)Z
ASNA0082-(*)Z
3D0212N(*)X(*)
ASNA0081-4(*)Z
ASNA0082B3(*)Z
ASNA0082A(*)Z
ST3M836(*)SUB
ASNA0081A(*)Z
ASNA0082B4(*)Z
Tool Selection for Composilok 100º Flush Tension Head Fasteners
OEM
AIRBUS ASNA0012
ABS0256
BOEING 3M1067
3M1139
BACB30XS
LOCKHEED C9513
MARTIN 5632167
MONOGRAM
PART NUMBERS
MBF2012-( )-( )
use these tools
TOOL
MONOGRAM TOOLS
RATCHET HAND TOOL
5/32"
3/16"
FASTENER DIAMETER
1/4"
MP550BFF-5AA
MR550BFF-5AA
MRC550BFF-5AA
MRT550BFF-5AA
MH75BFF-5AA
MHC75BFF-5AA
MP550BFF-6AA
MR550BFF-6AA
MRC550BFF-6AA
MRT550BFF-6AA
MH75BFF-6AA
MHC75BFF-6AA
MP550BFF-8AA
MR550BFF-8AA
MRC550BFF-8AA
MRT550BFF-8AA
MH75BFF-8AA
MHC75BFF-8AA
LOKFAST TOOLS
RATCHET HAND TOOL
S540MTD5-BF
7440C5-BF
7440M5-BF
HWF165-BF
HWF5-BF
S540MTD6-BF
7440C6-BF
7440M6-BF
HWF200-BF
HWF6-BF
S540MTD8-BF
7440C8-BF
7440M8-BF
HWF260-BF
HWF8-BF
5/16"
3/8"
MP550BFF-10AA
MP550BFF-12AA
MH75BFF-10AA
MHC75BFF-10AA
MH75BFF-12AA
MHC75BFF-12AA
S540MTD10-BF
S540MTD12-BF
HWF312-BF
HWF10-BF
HWF375-BF
HWF12-BF
LOKFAST TOOL KITS
CLHK-101
RATCHET HAND TOOL
4060 KIT
4080 KIT
ASNA0081C(*)Z
ST3M770(*)SUB
ASNA0081-5(*)Z
HS5450(*)DL
ST3M782(*)SUB
3D0212N(*)-(*)
ASNA0081-6(*)Z
ST3M790(*)SUB
ASNA0081B(*)Z
ST3M781(*)SUB
ASNA0081-2(*)Z
ASNA0082B2(*)Z
3M987(*)SUB
CAN43084(*)
ASNA0081-3(*)Z
ASNA0082B5(*)Z
ASNA0082-(*)Z
3D0212N(*)X(*)
ASNA0081-4(*)Z
ASNA0082B3(*)Z
ASNA0082A(*)Z
ST3M836(*)SUB
ASNA0081A(*)Z
ASNA0082B4(*)Z
Tool Selection for Composilok Protruding Head & 130º Flush Shear Head Fasteners
Low Profile Protruding Head
OEM
AIRBUS
ASNA0013
ABS0254
CASA
CAN43057
LOCKHEED
MONOGRAM
PART NUMBERS
MBF2010-( )-( )
491B0700024
130º Flush Shear Head
OEM
AIRBUS ASNA0018
ABS0257
BOEING BACB30VK
CASA CAN43058
LOCKHEED 491B0700046
MONOGRAM
PART NUMBERS
MBF2013-( )-( )
use these tools
FASTENER DIAMETER
1/4"
TOOL
MONOGRAM TOOLS
RATCHET HAND TOOL
5/32"
3/16"
MP550BFR-5AA
MR550BFR-5AA
MRC550BFR-5AA
MRT550BFR-5AA
MH75BFR-5AA
MHC75BFR-5AA
MP550BFR-6AA
MR550BFR-6AA
MRC550BFR-6AA
MRT550BFR-6AA
MH75BFR-6AA
MHC75BFR-6AA
MP550BFR-8AA
MR550BFR-8AA
MRC550BFR-8AA
MRT550BFR-8AA
MH75BFR-8AA
MHC75BFR-8AA
LOKFAST TOOLS
RATCHET HAND TOOL
S540MTD5T-BF
7440C5T-BF
7440M5T-BF
HWT165-BF
HWT5-BF
S540MTD6T-BF
7440C6T-BF
7440M6T-BF
HWT200-BF
HWT6-BF
S540MTD8T-BF
7440C8T-BF
7440M8T-BF
HWT260-BF
HWT8-BF
5/16"
3/8"
MP550BFR-10AA
MP550BFR-12AA
MH75BFR-10AA
MHC75BFR-10AA
MH75BFR-12AA
MHC75BFR-12AA
S540MTD10T-BF
S540MTD12T-BF
HWT312-BF
HWT10-BF
HWT375-BF
HWT12-BF
LOKFAST TOOL KITS
CLHK-101
RATCHET HAND TOOL
4060 KIT
4080 KIT
ASNA0082-(*)Z
3D0212N(*)X(*)
ASNA0081-4(*)Z
ASNA0082B3(*)Z
ASNA0082A(*)Z
ST3M836(*)SUB
ASNA0081A(*)Z
ASNA0082B4(*)Z
Tool Selection for Composilok II ® Fasteners
MONOGRAM
AIRBUS
PART NUMBERS PART NUMBERS
use these tools
BOEING
PART NUMBERS
MBF2120
MBF2110-( )-( ) ASNA0013( )-( )Z
ABS0254( )-( )Z
MBF2121
MBF2122
MBF2123
MBF2111-( )-( ) ASNA0017( )-( )Z BACB30VL( )(*)( )D
ABS0255( )-( )Z
MBF3003
MBF3004
MBF2112-( )-( ) ASNA0012( )-( )Z BACB30XS
ABS0256( )-( )Z
MBF3005
MBF3008
MBF3009
MBF3010
Table for tool selection only.
MBF3011
Not to be used for cross-referencing fasteners
CAN43059(*)
\
5/32"
3/16"
MP550BFDN-5AA
MR550BFDN-5AA
MRC550BFDN-5AA
MRT550BFDN-5AA
MRCR550BFDN-5AA
MH75BFDN-5AA
MHC75BFDN-5AA
MP550BFDN-6AA
MR550BFDN-6AA
MRC550BFDN-6AA
MRT550BFDN-6AA
MRCR550BFDN-6AA
MH75BFDN-6AA
MHC75BFDN-6AA
LOKFAST TOOLS
RIGHT ANGLE, TORQUE RESPONSIVE(1)
RATCHET HAND TOOL
DN5AA-BF
DNR5AA-BF
DNRC5AA-BF
DNRT5AA-BF
DNRPT5AA-BF
DNH5AA-BF
DNHC5AA-BF
DN6AA-BF
DNR6AA-BF
DNRC6AA-BF
DNRT6AA-BF
DNRPT6AA-BF
DNH6AA-BF
DNHC6AA-BF
FASTENER DIAMETER
1/4"
5/16"
3/8"
MP550BFP-8AA
MP550BFDN-10AA MP550BFP-12AA
MR550BFDN-8AA
MRC550BFDN-8AA
MRT550BFDN-8AA
MRCR550BFDN-8AA
MH75DN-8AA
MH75DN-10AA
MH75DN-12AA
MHC75DN-8AA
MHC75DN-10AA MHC75BFDN-12AA
MBF3006
MBF2113-( )-( ) ASNA0018( )-( )Z BACB30VK( )(*)( )D
ABS0257( )-( )Z
Note (1) Right Angle, Torque Responsive with
Integrated Wrench / Torque Driver
TOOL
MONOGRAM TOOLS
CLOSE QUARTER 20º OFFSET RATCHET
RATCHET HAND TOOL
35701(*)
MBBN3019(*)
MBBN3018(*)
627-028(*)
JN0038(*)
GAF511AB(*)
CAN43057(*)
B0207002(*)
MBBN3016(*)
627-028(*)
491B0700063(*)
SP7315(*)
35700(*)
MBBN3017(*)
CAN43058(*)
110-220(*)
C9784(*)
627-028(*)
03A148(*)
B0207001(*)
SP7319(*)
DN8AA-BF
DNR8AA-BF
DNRC8AA-BF
DNRT8AA-BF
DNRPT8AA-BF
DNH8AA-BF
DNHC8AA
DNPT10AA-BF
DNR10AA-BF
DNRC10AA
DNRT10AA-BF
DNRPT10AA-BF
DNH10AA-BF
DNHC10AA
DNPT12AA-BF
DNH12AA-BF
DNHC12AA
LOKFAST TOOL KITS
CLIIHK-101
RATCHET HAND TOOL
Tool Selection for Radial-Lok ® Fasteners
MONOGRAM
PART NUMBERS
BOEING
PART NUMBERS
use these tools
MBF2120
TOOL
STYLE
3/16"
7/32"
FASTENER DIAMETER
1/4"
5/16"
MP550RL-6AA
MRT300RL-6AA
MP550RL-7AA
MRT300RL-7AA
MP550RL-8AA
MRT300RL-8AA
MP550RL-10AA
MRT300RL-10AA(1)
3/8"
MBF2121
MRL3210
3M1242
MRL3212
3M1243
MBF2122
MBF2123
(1)
(2)
MP550RL-12AA
MRT300RL-12AA(2)
MBF3003
Note (1) Will also install 9/32" dia fasteners
Note (2) Will also install 11/32" dia fasteners
Tool Selection for OSI-Bolt ® Fasteners
MONOGRAM
PART NUMBERS
BG2032
BG2034
BG2035
BG2035
BG2042
BG2044
BG2045
BG2062
BG2064
BG2065
BOEING
PART NUMBERS
use these tools
MBF2120
TOOL
STYLE
3/16"
MP550OLS-6AA
MR550OL-6AA
MRC550OL-6AA
MRT300OL-6AA
FASTENER DIAMETER
1/4"
5/16"
3/8"
MBF2121
BACB30Y
MBF2122
MBF2123
3D0299
MBF3003
MP550OLS-8AA
MR550OL-8AA
MRC550OL-8AA
MRT300OL-8AA
MP550OLS-10AA
MP550OLS-12AA
MRT300OL-10AA
MRT300OL-10AA
MAF ®, ASP ® & 2ASP Tool Selection
AspPP-DT(*)-(**)
AspPF-DT(*)-(**)
AspFP-V(*)-(**)
AspFP-EU(*)-(**)
AspFP-DT(*)-(**)
AspFF-V(*)-(**)
AspFF-EU(*)-(**)
AspFF-DT(*)-(**)
2AspPP-V(*)-(**)
2AspPP-EU(*)-(**)
2AspPP-DT(*)-(**)
2AspPF-V(*)-(**)
2AspPF-EU(*)-(**)
2AspPF-DT(*)-(**)
2AspFP-V(*)-(**)
2AspFP-EU(*)-(**)
2AspFP-DT(*)-(**)
2AspFF-V(*)-(**)
2AspFF-EU(*)-(**)
2AspFF-DT(*)-(**)
2Asp509P-V(*)-(**)
2Asp509P-EU(*)-(**)
2Asp509P-DT(*)-(**)
2Asp509F-V(*)-(**)
2Asp509F-EU(*)-(**)
use these tools
Fastener Diameter
All Rights Reserved
Fastener
Diameter
-6
13/64"
-8
17/64"
-10
21/64"
Hex Wrench Size
5/64"
3/32"
1/8"
106524
106525
107735
20 Inch Pounds
30 Inch Pounds
40 Inch Pounds
Sleeve Driver
Maximum
Installation
Torque *
POWER TOOL
PART NUMBER
PULLING HEAD
STYLE
202
2012
In-Line, Regular
In-Line, Long
99-2642
99-2643
99-2645
99-2646
244
In-Line, Regular
In-Line, Long
99-2642
99-2643
99-2645
99-2646
99-2648
99-2649
244OS
206-375 / A206-375
Offset
Increased Offset
99-3728
99-3728-1
99-3729
99-3729-1
99-3730
99-3730-1
245 / 255
2502 / A2502
In-Line, Regular
In-Line, Long
Offset
Increased Offset
99-2642(1)
99-2643(1)
99-3728(2)
99-3728-1(2)
99-2645(1)
99-2646(1)
99-3729(2)
99-3729-1(2)
99-2648(1)
99-2649(1)
99-3730(2)
99-3730-1(2)
2Asp509F-DT(*)-(**)
ASP and 2ASP are registered trademarks
of Alcoa Fastening Systems
MAF is a registered trademark of
Monogram Aerospace Fasteners
PULLING HEAD PART NUMBER
(1) Requires adapter part number 102463
(2) Required adapter part number 119400-1 and stroke limiter part number 118362.
(*) Installation torque must be adjusted to determine the controlled clamping force required for the soft-core material being fastened.
Over-torquing could result in damage to the installation sleeve driver.
Tool Selection for Huck GP® Groove Proportioned Lockbolts
use these tools
NAS
HUCK
BOEING
POWER TOOL
PULLING HEAD
PART NO.
PART NO.
PART No
PART NUMBER
STYLE
FOR LOCKBOLT DIAMETER
-4
Shear Lockbolts
GPL3SC-V
GPL3SP-V
In Line Short
99-2651
-5
-5
Shear
Tension
-6
-8
99-2548S
99-2548T
99-2554
99-2560(1)
GPL3SC-DT
HUCK 244
In Line Medium
99-2549S
99-2549T
99-2555
99-2561(1)
GPL3SP-DT
2480* / A2480*
In Line Long
99-2550S
99-2550T
99-2556
99-2562(1)
GPL3SC-EU
-10
-12
These heads are also compatible with Cherry G83 / G84 Power tools
GPL3SP-EU
Also GPL4S…..
HUCK 244OS
1" Offset
206-375* / A206-375*
1-3/8" Offset
and GPL6S…..
99-3703S
99-3703T
99-3704
99-3705
99-3703S-1
99-3703T-1
99-3704-1
99-3705-1
These heads are also compatible with Cherry G84-LSR Power tool
Tension Lockbolts
In Line Short
99-2551S
99-2551T
99-2557
99-2563
99-2566
99-2569(3)
GPL8TC-V
HUCK
In Line Medium
99-2552S
99-2552T
99-2558
99-2564
99-2567
99-2570(3)
GPL8TP-V
245 / 246
In Line Long
99-2553S
99-2553T
99-2559
99-2565
99-2568
99-2571(3)
GPL8TC-V
255 / 256
Shark Bite
99-2954
99-2952
99-2953
99-2957(3)
GPL8TP-V
2502* / A2502*
In Line Stub Medium
GPL8TC-V
GPL8TP-V
2503* / A2503*
In Line Stub Long
In Line Stub Startle
1" Offset
Also GPL7T…..
1-3/8" Offset
99-1506(3)
99-1508(3)
99-1510(3)
99-1507
(3)
99-1509
(3)
(3)
99-1528
(3)
99-1529
(3)
99-3703S(2)
99-3703T(2)
99-3704(2)
99-3705(2)
99-3703S-1(2)
99-3703T-1(2)
99-3704-1(2)
99-3705-1(2)
99-1511
99-1537(3)
99-1538(3)
These heads are also compatible with Cherry G85D-S / G87D Power tools
* Hydraulic Tool - requires separate Power Unit
Note (1): 244 installs Aluminium & Shear Fasteners only
Note (1): 2480 / A2480 will not install tension type DT alloy steel
Note (2): Requires 119400-1 Adapter and 118362 Stroke Limiter
Note (3): Requires 117831 Adapter and 118362 Stroke Limiter
Tool Selection for Huck LGP® Lightweight Groove Proportioned & XPL ® Lockbolts
use these tools
NAS
HUCK
POWER TOOL
PULLING HEAD
PART NO.
PART NO.
PART NUMBER
STYLE
-4
-5
-6
-8
-10
-12
LGPL2SC-V
LGPL2SP-V
In Line Short
LGPL2SC-DT
HUCK 244
In Line Medium
LGPL2SP-DT
2480* / A2480*
In Line Long
LGPL2SC-EU
99-2654
99-2500
99-2506
99-2512
99-2501
99-2507
99-2513
99-2502
99-2508
99-2514
LGPL2SP-EU
LGPL2SC-EB
HUCK 244OS
1" Offset
LGPL2SP-EB
206-375* / A206-375*
1-3/8" Offset
LGPL7SC-V
NAS2025-2032
LGPL8SC-V
NAS2035-2042
LGPL9SC-V
NAS2015-2022
LGPL9SP-V
LGPL12SP-V
Note (1): Requires 117831 Adapter and 118362 Stroke Limiter
(can also be used with 125770 Adapter
on 208-625* / A208-625* hydraulic tools)
99-3700
99-3701
99-3702
99-3700-1
99-3701-1
99-3702-1
In Line Short
99-2503
99-2509
99-2515
99-2518
99-2521(3)
HUCK
In Line Medium
99-2504
99-2510
99-2516
99-2519
99-2522(3)
245 / 246
In Line Long
99-2505
99-2511
99-2517
99-2520
99-2523(3)
255 / 256
Shark Bite
99-2955
99-2950
99-2951
99-2956(3)
2502* / A2502*
In Line Stub Medium
2503* / A2503*
In Line Stub Long
99-1500(1)
99-1502(1)
99-1504(1)
(1)
(1)
(1)
99-1501
99-1525(1)
1" Offset
99-3700(2)
1-3/8" Offset
99-3700-1
99-1503
99-1505
99-1526(1)
99-1527(1)
99-3701(2)
(2)
99-3701-1
99-1536(1)
99-1539(1)
99-3702(2)
(2)
99-3702-1
99-1719DG(4)
(2)
(2): Requires 119400-1 Adapter and 118362 Stroke Limiter
(3): Huck 245 not suitable for -12 diameter
Increase pull pressure on hydraulic units to 8400 psi
(4): Requires 122134 Adapter and 118362 Stroke Limiter
Tool Selection for Huck MGP® Metric Groove Proportioned Lockbolts
use these tools
HUCK
DASSAULT
POWER TOOL
PULLING HEAD
PART NO.
PART NO.
PART NUMBER
STYLE
MGPL8T
4 mm
5 mm
6 mm
In Line Short
99-2572
99-2578
99-2584
HUCK 244
In Line Medium
99-2573
99-2579
99-2585
2480* / A2480*
In Line Long
99-2574
99-2580
99-2586
35655-( )( )
MGPL28T
8 mm
10 mm
Table for tool selection purposes only,
- not to be used for cross-referencing fasteners
HUCK 244OS
1" Offset
99-3706
99-3707
99-3708
206-375* / A206-375*
1-3/8" Offset
99-3706-1
99-3707-1
99-3708-1
208-625 / A208-625
1" Offset
99-1722DG
99-1760DG
HUCK
In Line Short
99-2575
99-2581
99-2587
99-2590
99-2593
245 / 246
In Line Medium
99-2576
99-2582
99-2588
99-2591
99-2594
255 / 256
In Line Long
99-2577
99-2583
99-2589
99-2592
99-2595
2502* / A2502*
2503* / A2503*
1" Offset
1-3/8" Offset
(1)
(1)
99-3706
(1)
99-3706-1
99-3707
(1)
99-3707-1
(1)
99-3708
(1)
99-3708-1
Tool Selection for Huck MLGP® Lightweight Metric Lockbolts
use these tools
HUCK
POWER TOOL
PULLING HEAD
PART NO.
PART NUMBER
STYLE
MLGPL22SC
4 mm
5 mm
6 mm
In Line Short
99-2524
99-2530
99-2536
MLGPL22SP
HUCK 244
In Line Medium
99-2525
99-2531
99-2537
MLGPL28SC
2480* / A2480*
In Line Long
99-2526
99-2532
99-2538
8 mm
10 mm
MLGPL29SC
MLGPL29SP
MCIL28SC
HUCK 244OS
Offset
99-3709
99-3710
99-3711
MCIL29SC
206-375* / A206-375*
Increased Offset
99-3709-1
99-3710-1
99-3711-1
MCIL29SP
HUCK
In Line Short
99-2527
99-2533
99-2539
99-2542
99-2545(2)
245 / 246
In Line Medium
99-2528
99-2534
99-2540
99-2543
99-2546(2)
255 / 256
In Line Long
99-2529
99-2535
99-2541
99-2544
99-2547(2)
2502* / A2502*
Offset
99-3709(1)
99-3710(1)
99-3711(1)
2503* / A2503*
Increased Offset
99-3709-1(1)
99-3710-1(1)
99-3711-1(1)
(2): Huck 245 not suitable for 10 mm diameter
Tool Selection for NAS Lockbolts
NAS
PART NO.
CHERRY
PART NO.
HUCK
PART NO.
Shear Lockbolts
NAS1414 - 1422
NAS1424 - 1432
NAS1436 - 1442
NAS1446 - 1452
NAS2406 - 2412
NAS2506 - 2512
NAS2605 -2612
NAS2705 - 2712
NAS6974 - 6982
NAS6984 - 6992
NAS7004 - 7012
NAS7014 - 7022
NAS7024 - 7032
NAS7034 - 7042
SAL100-T
SALP-T
SLS100-T
SLSP-T
SAL100-T
SALP-T
NAS6915 - 6922
NAS6925 - 6932
NAS6935 - 6942
NAS6946 - 6952
NAS6955 - 6962
NAS6965 - 6972
POWER TOOL
PART NUMBER
HUCK 244
2480* / A2480*
HUCK 244OS
206-375* / A206-375*
S3L100-EU
S2LP-EU
S3L100-DT
S3LP-DT
SLS100-EU
SLSP-EU
S3L100-EU
S2LP-EU
S3L100-DT
S3LP-DT
Tension Lockbolts
NAS1456 - 1462
NAS1465 - 1472
NAS1475 - 1482
NAS1486 - 1492
NAS1496 - 1502
NAS1516 - 1522
NAS1525 - 1532
NAS1535 - 1542
NAS1546 - 1552
NAS1555 - 1562
NAS2005 - 2012
NAS2105 - 2112
NAS2115 -2122
NAS2125 - 2132
NAS2205 -2212
NAS2306 - 2312
use these tools
R3002-T
R3001-T
R3014-T
2L509-E
2LP-E
2L426-E
R3002-T
R3001-T
R3014-T
2LS509-T
2LSP-T
2L509-E
2LP-E
2L426-E
2LS509-E
2LSP-E
POWER TOOL
PART NUMBER
CHERRY
G83 / G84
2L509-EU
2L426-EU
2LP-EU
Note (1): Huck 245 will pull Aluminium only in -12 diameter
(2) Requires 119400-1 Adapter & 118362 Stroke limiter
(3) Requires 122134 Adapter
(4) Requires 117831 Adapter & 118362 Stroke limiter
(can also be used on 208-625* / A208-625* with 125770 Adapter)
-5
-5
-10
-12
Shear
Tension
99-2548T
99-2554
99-2560
In Line Short
99-2548S
In Line Medium
99-2651
99-2549S
99-2549T
99-2555
99-2561
In Line Long
99-2550S
99-2550T
99-2556
99-2562
Heads designed for Cherry G83 / G84 may also be compatible. Heads for Huck 245 / 246 and Cherry G85D-S / G87D may be used with 744-100 adapter
1" Offset
1-3/8" Offset
-4
99-3703S
99-3703S-1
99-3703T
99-3703T-1
99-3704
99-3704-1
99-3705
99-3705-1
99-2551T
99-2557
99-2563
99-2566
In Line Short
99-2551S
In Line Medium
99-2552S
99-2552T
99-2558
99-2564
99-2567
HUCK
In Line Long
99-2553S
99-2553T
99-2559
99-2565
99-2568
99-3703T(2)
99-3704(2)
99-3705(2)
99-1720DG(3)
99-3703S(2)
245
1" Offset
99-3703T-1(2)
99-3704-1(2)
99-3705-1(2)
99-3703S-1(2)
255 / 246 / 256
1-3/8" Offset
99-1510(4)
99-1508(4)
2502* / A2502*
In Line Stub Medium
99-1506(4)
99-1511(4)
99-1538(4)
99-1509(4)
2503* / A2503*
In Line Stub Long
99-1507(4)
99-1530(4)
99-1537(4)
99-1529(4)
99-1528(4)
Heads designed for Cherry G85D-S/G87D may also be compatible. Heads for Huck 244 and Cherry G83 / G84 may be used with 552 adapter
2LS426-E
2LS426-T
2L200-T
PULLING HEAD
STYLE
-6
-8
CHERRY
G85D-S / G87D
PULLING HEAD
STYLE
-4
-5
H513-04-20
H513-04-35
H513-05-35
H513-04-60
H513-05-60
H513S-05-20
-6
-8
-10
Straight, Short Pintail 2" long
H513-06-20
Straight, Short Pintail 3.5" long
H513-08-35
Straight, Short Pintail 6" long
H513-06-60
Swivel 2" long
H513S-06-20
Swivel 3.5" long
H513S-06-35
H513S-08-35
Swivel, Self-Releasing 2" long
H513SR-05-20
H513SR-06-20
Swivel, Self-Releasing 3.5" long
H513SR-06-35
Swivel, Self-Releasing, Chisel Shape 2" long
H513SRC-05-20
H513SRC-06-20
Swivel, Self-Releasing, Chisel Shape 3.5" long
H513SRC-05-35
H513SRC-06-35
Offset
H563-4B
H563-5B
H563-6B
Offset Short PinTail
H563SP-4B
H563SP-5B
H563SP-6B
Heads designed for Huck 244 may also be compatible. Heads for Cherry G85D-S / G87D and Huck 245 / 246 may be used with 744-100 adapter
Swivel 2-3/8" long
H513S-06-24
H513S-08-24
Swivel 2-11/16" long
H513S-10-27
Swivel 3-1/2" long
H513S-05-35
Swivel 4-3/16" long
H513S-10-42
Swivel 4-13/16" long
H513S-06-48
H513S-08-48
Swivel, Self-Releasing 2-3/8" long
H513SR-06-24
H513SR-08-24
H513SR-10-27
H513SR-10-42
H513SR-06-48
H513SR-08-48
Swivel, Self-Releasing, Chisel Shape 4-13/16" long
H513SRC-08-48
Offset
H562-6B
H562-8B
Heads designed for Huck 245/ 246 may also be compatible. Heads for Cherry G83 / G84D and Huck 244 may be used with 552 adapter
99-2569(1)
99-2570(1)
99-2571(1)
-12
H513S-12-27
H513S-12-42
H513SR-12-27
H513SR-12-42
Compression Riveters - Alligator Jaw Models
CAPACITY
Model
No.
Aluminium
in.
mm
STANDARD JAW
Steel
in.
mm
Reach
in.
Closed
Height
Gap
mm
in.
mm
m
m
in.
MOVING JAW
Part of
Max.
Maximum Force Stroke at
Max.
(90
Travel
Force
PSI)
in.
mm Pounds in.
mm
NET
WEIGHT
WITH
JAWS
OVERALL
LENGTH
lbs
in.
kg
mm
3000A-1-1/2” 1/8
3000A-2-1/4” 1/8
3000A-3” 3/32
3.2 3/32 2.4 1-1/2 38 1-5/8 41
3.2 3/32 2.4 2-1/4 57 2-1/8 54
2.4 3/32 2.4
3
76 2-1/8 54
7/8 23 5/8 16
7/8 23 7/8 23
7/8 23 1-1/4 32
3000
2200
1800
1/16 1.6 3-3/4 1.7 9-3/16
3/32 2.4 4-1/4 1.9 10-1/8
1/8 3.2 4-3/4 2.1 10-7/8
233
257
276
6000A-1-1/2” 3/16
6000A-2-1/4” 5/32
1/8
6000A-3”
4.8 5/32 4.0 1-1/2 38 1-5/8 41
4.0 1/8 3.2 2-1/4 57 2-1/8 54
3.1 3/32 2.4
3
76 2-1/8 54
7/8 23 5/8 16
7/8 23 7/8 23
7/8 23 1-1/4 32
6000
4300
3400
1/16 1.6 5-1/2 2.5
12
3/32 2.4
6
2.7
13
1/8 3.2 6-1/4 2.8 13-3/4
305
330
350
For additional GP models including Bench-Mounted please click here.
Ordering No.
Ordering
(Jaw Assembly)
No.
JAW
(Power REACH
3/16” SET 1/4" SET
Unit Only)
HOLE
HOLE
Model
No.
Tri-Cylinder ULTRALITE®
(Formerly Deutsch APT range)
CAPACITY
Aluminum
Part of Stroke
at Max. Force
NET WEIGHT
WITH JAWS
OVERALL
LENGTH
in.
mm
in.
mm
Pounds
in.
mm
lbs.
kg.
in.
mm
710A HF
8521
1-1/2
2-1/4
3
7360
7362
7364
7361
7363
7365
3/16
5/32
1/8
4.8
4.0
3.2
5/32
1/8
3/32
4.0
3.2
2.4
4500
3300
2700
1/32
3/64
1/16
0.8
1.2
1.6
3-3/4
4-1/4
4-3/4
1.7
1.9
2.1
9-3/16
10-1/8
10-7/8
233
257
276
725A HF
8523
1-1/2
2-1/4
3
7360
7362
7364
7361
7363
7365
1/4
3/16
5/32
6.4
4.8
4.0
3/16
5/32
1/8
4.8
4.0
3.2
9000
6450
5100
1/32
3/64
1/16
0.8
1.2
1.6
5-1/2
6
6-1/4
2.5
2.7
2.8
12
13
13-3/4
305
330
350
735A
17283
3
5
7
17148
17146
19000
17149
17147
19010
1/4
3/16
5/32
6.4
4.8
4.0
3/16
5/32
1/8
4.8
4.0
3.2
10000
6800
4400
9
11
13
4
5
6
20.2
22.5
24.5
513
572
622
740A
1825
2-7/8
5
7
9-1/8
2460
1767
1769
449
6134
1768
1770
1771
3/16
5/32
1/8
1/8
4.8
4.0
3.2
3.2
5/32
1/8
3/32
3/32
4.0
3.2
2.4
2.4
8150
4695
3350
2570
1/8
1/8
3/16
1/16
3.2
3.2
4.8
1.6
16-1/2
21-3/4
25-1/2
26
7.5
9.9
11.6
11.8
19-3/4
21-3/4
23-3/4
25-3/4
501
552
603
654
745A
9476
2-7/8
5
2460
1767
6134
1768
3/16
5/32
4.8
4.0
5/32
1/8
4.0
3.2
6000
3450
1/16
1/16
1.6
1.6
13
16
5.9
7.2
17-1/2
22-1/2
444
571
2087
2-7/8
5
7
9-1/8
2460
1767
1769
449
6134
1768
1770
1771
5/16
1/4
3/16
3/16
7.9
6.4
4.8
4.8
1/4
3/16
5/32
5/32
6.4
4.8
4.0
4.0
16300
9300
6700
5140
1/8
3/16
1/16
1/16
3.2
4.8
1.6
1.6
19
24-1/4
28
29
8.6
11
12.7
13.1
25
27
29
31-1/8
635
685
736
790
750A
To order, add Jaw assembly no. after Power Unit no.
Example: for 735A Unit with 5” Reach 3/16” Set Hole
CAPACITY
RTC
Steel
Max.
Force
(90 PSI)
(Reliable Tool Co)
Model
No.
JAW
REACH
RTC1400-3
Aluminum
Steel
Max.
Force
(90 PSI)
Max Trave
Part number = 17283-17146
NET WEIGHT
WITH JAWS
OVERALL
LENGTH
in.
mm
in.
mm
Pounds
in.
mm
lbs.
kg.
in.
mm
3
5/16+
7.9
1/4+
6.4+
16000
0.84
21.3
12
5.5
25
635
RTC1400-5
5
5/16
7.9
1/4
6.4
10500
1.32
33.5
14
6.4
27
686
RTC1400-7
7
1/4
6.4
3/16
4.8
7800
1.81
46.0
20
9.1
29
737
RTC1400-9
9-1/8
1/4
6.4
3/16
4.8
7600
2.32
58.9
24
10.9
32
813
Accessories / Options
Model No.
Description
RTC1400-P
RTC 1400 Power Unit less Head Assembly
RTC1400-H
RTC 1400 Head Assembly less Power Unit
RTC1400-J3
RTC 1400 Power Unit with Head Assembly less 3” Jaws
RTC1400-J9
RTC 1400 Power Unit with Head Assembly less 9” Jaws
16-020
Suspension Bracket for us with Balancer (9-1/8”)
Compiled from manufacturer’s publications and reproduced with permission. E & OE.
Copyright: Peter Lewis Wesco Aircraft Tool Division © All Rights Reserved
Compression Riveters - C-Yoke Models
STANDARD “C”
YOKE
CAPACITY
Model
No.
CLOSED
HEIGHT
SET HOLDER PLUNGER
Max.
Force
(90 PSI)
Maximum
Travel
Part of Stroke
at Max. Force
(Final)
in.
(mm)
NET WEIGHT
WITH 1-1/2”
REACH YOKE
LENGTH
lbs.
(kg)
in.
(mm)
Alum
Steel
Reach
Gap
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
3000C
1/8
(3.2)
3/32
(2.4)
1-1/2
(38.1)
1-1/4
(31.7)
11/16
(17.5)
9/16
(14.3)
3000
1/16
(1.6)
4-1/2
(2.0)
10-1/4
(260)
6000C
3/16
(4.8)
5/32
(4.0)
1-1/2
(38.1)
1-1/4
(31.7)
11/16
(17.5)
9/16
(14.3)
6000
1/16
(1.6)
5-1/2
(2.5)
14
(362)
Pounds
General Pneumatic C-Yoke models are also available with 2”, 2-1/2”, 3”, 3-1/2” Reach Yokes. Click on the model number for more information.
For other GP models including Bench-Mounted up to 15 000 lbf click here
CAPACITY
Model
No.
Ordering No.
(Power Unit
Only)
YOKES AVAILABLE
Aluminum
Steel
in.
(mm)
in.
(mm)
3/32
(2.4)
Tri-Cylinder ULTRALITE®
(Formerly Deutsch APT range )
705HF
8520
5/32
(4.0)
720HF
8522
1/4
(6.4)
3/16
(4.8)
735
16357
5/16
(7.9)
1/4
(6.4)
740
9475
3/16
(4.8)
5/32
(4.0)
745
6532
5/16
(7.9)
1/4
(6.4)
To order, add Yoke assembly no. after Power Unit no.
Reach
C-YOKE
ASSY. NO
Gap
in.
mm
in.
mm
3/16” SET
HOLE
1/4” SET
HOLE
1-1/2
2
2-1/2
3
3-1/2
1-1/2
2
2-1/2
3
3-1/2
1-1/2
2
3
1-1/2
2-1/2
2-1/2
2-1/8
2-1/2
3-3/4
3-5/16
3-1/4
3-3/4
2-3/8
1-1/2
2
3
1-1/2
2-1/2
2-1/2
38.1
50.8
63.5
76.2
88.9
38.1
50.8
63.5
76.2
88.9
38.1
50.8
76.2
38.1
63.5
63.5
54
63.5
95.2
84.1
82.5
95.2
60.3
38.1
50.8
76.2
38.1
63.5
63.5
1-1/4
1-1/4
1-3/8
1-1/2
1-1/2
1-1/4
1-1/4
1-3/8
1-1/2
1-1/2
1-1/4
1-1/2
1-1/2
2
1-3/8
1-3/8
1-3/32
1-9/16
1-1/4
3
1-1/16
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
2
1-3/8
1-3/8
31.7
31.7
34.9
38.1
38.1
31.7
31.7
34.9
38.1
38.1
31.7
38.1
38.1
50.8
34.9
34.9
27.8
39.7
31.7
76.2
27
31.7
31.7
31.7
38.1
38.1
50.8
34.9
34.9
538
958
959
960
961
538
958
959
960
961
7479
7481
7482
7483
7484
7485
991
993
994
995
996
997
998
7479
7481
7482
7483
7484
7485
6336
9562
9561
9563
9564
6336
9562
9561
9563
9564
3052
6477
6478
6479
6480
6481
7353
7354
7366
7367
7368
7369
7379
3052
6477
6478
6479
6480
6481
SET HOLDER PLUNGER NET WEIGHT
WITH
LENGTH
Max.
Part of Stroke SMALLEST
Force
at Max. Force
YOKE
(90 PSI)
(Final)
Pounds
in.
(mm)
lbs.
(kg.)
in.
(mm)
4500
1/32
0.8
4.5
(2.0)
10.25
(260)
9000
1/32
0.8
5.5
(2.5)
14
(362)
11000
1/8
3.2
10.1
(4.6)
21
(525)
6000
1/8
3.2
12.75
(5.7)
17.75
(451)
10000
1/8
3.2
10
(4.5)
17.5
(444)
Example: for 735 Unit with 1-1/2” Reach 1-1/4” Gap 3/16” Set Hole
Part number = 16357-7479
ATI rivet sets are manufactured from hit-grade, shock resistant steel and are polished both before and after heat treat to
ensure the elimination of all tool marks. The working surfaces of each tools is coated with clear plastic to prevent damage
during shipment and storage. Special cup and shank dimensions are available upon request.
Flush-Type Rivet Squeezers
Rivet Squeezer Kits
Squeezer Head Diameter
Body Length
3/8”
1/2"
1/8”
AT109EN
AT109AN
1/4”
AT109EP
AT109AP
3/8”
AT109ER
AT109AR
1/2”
AT109ES
AT109AS
5/8”
AT109ET
AT109AT
3/4"
AT109EW
AT109AW
(of squeezer)
Rivet Squeezer Kit,
28 Piece
AT108A-28PC
Rivet Squeezer Kit,
33 Piece
AT108A-33PC
Cupped-Type Rivet Squeezers
Rivet (Shank) Diameter
Body Length
(of squeezer)
3/32”
1/8”
5/32”
3/16”
1/8”
AT108AN 3/32 AN470
AT108AN 1/8 AN470
AT108AN 5/32 AN470
AT108AN 3/16 AN470
1/4”
AT108AP 3/32 AN470
AT108AP 1/8 AN470
AT108AP 5/32 AN470
AT108AP 3/16 AN470
AT108AP 1/4 AN470
3/8”
AT108AR 3/32 AN470
AT108AR 1/8 AN470
AT108AR 5/32 AN470
AT108AR 3/16 AN470
AT108AR 1/4 AN470
1/2”
AT108AS 3/32 AN470
AT108AS 1/8 AN470
AT108AS 5/32 AN470
AT108AS 3/16 AN470
AT108AS 1/4 AN470
5/8”
AT108AT 3/32 AN470
AT108AT 1/8 AN470
AT108AT 5/32 AN470
AT108AT 3/16 AN470
3/4"
AT108AW 3/32 AN470
AT108AW 1/8 AN470
AT108AW 5/32 AN470
AT108AW 3/16 AN470
1/4”
ATI rivet sets are manufactured from hit-grade, shock resistant steel and are polished both before and after heat treat to ensure the
elimination of all tool marks. The working surfaces of each tools is coated with clear plastic to prevent damage during shipment and storage.
All Rivet sets are .401" shank diameter unless otherwise specified. Special cup and shank dimensions are available upon request.
Cupped Rivet Sets
1/8”
2-1/2"
3-1/2"
5-1/2"
7-12"
10-1/2"
AT100A-2-3/32 AN470
AT100A-3-3/32 AN470
AT100A-5-3/32 AN470
AT100A-7-3/32 AN470
AT100A-8-3/32 AN470
AT100A-2-1/8 AN470
AT100A-3-1/8 AN470
AT100A-5-1/8 AN470
AT100A-7-1/8 AN470
AT100A-8-1/8 AN470
AT100A-2-5/32 AN470
AT100A-3-5/32 AN470
AT100A-5-5/32 AN470
AT100A-7-5/32 AN470
AT100A-8-5/32 AN470
AT100A-2-3/16 AN470
AT100A-2-1/4 AN470
AT100A-3-3/16 AN470 AT100A-3-7/32 AN470 AT100A-3-1/4 AN470
AT100A-5-3/16 AN470
AT100A-5-1/4 AN470
AT100A-7-3/16 AN470
AT100A-8-3/16 AN470
3-1/2"
5-1/2"
7-12"
10-1/2"
AT101A-3-3/32 AN470
AT101A-5-3/32 AN470
AT101A-7-3/32 AN470
AT101A-8-3/32 AN470
AT101A-3-1/8 AN470
AT101A-5-1/8 AN470
AT101A-7-1/8 AN470
AT101A-8-1/8 AN470
AT101A-3-5/32 AN470
AT101A-5-5/32 AN470
AT101A-7-5/32 AN470
AT101A-8-5/32 AN470
AT101A-3-3/16 AN470 AT101A-3-7/32 AN470 AT101A-3-1/4 AN470
AT101A-5-3/16 AN470
AT101A-5-1/4 AN470
AT101A-7-3/16 AN470
AT101A-8-3/16 AN470
5-3/4"
AT105A-3/32 AN470
AT105A-1/8 AN470
AT105A-5/32 AN470
AT105A-3/16 AN470
6-5/8"
AT104A-3/32 AN470
AT104A-1/8 AN470
AT104A-5/32 AN470
AT104A-3/16 AN470
Overall
Length
1/2"
5/8"
AT100AF-3A
AT100AF-5A
AT100AF-8A
AT100AF-3B
AT100AF-5B
3/4"
AT113A-1
1"
Overall
Length
Straight Drive
10 deg. Offset
Double Offset
Gooseneck
Flush Rivet Sets
AT100 series
Short
2-3/4"
3-1/2"
5-1/2"
10-1/2"
1-11/16"
1-13/16"
3"
2-1/2"
Polyurethane Rim
Rubber Guard
Rivet Set Diameter (of striking face)
AT113A-2
1-1/4"
ST1111B-V401K-3
AT110CB
1/2"
AT101AF-3A
AT101AF-5A
1"
1-1/4"
AT121A-3
AT121A-4
AT121A-6
1"
1-1/4"
AT107A-1
AT107A-3
AT107A-4
AT107A-2
1/4”
AT107 series
AT112A
1"
ST1111B-V401K-2
AT110CA
3-1/2"
5-1/2"
7-12"
7/32"
1-7/8"
3/4"
ST1111B-V401K-1
AT106A
Flush, Offset
AT101AF
Rivet Shank Diameter
5/32”
3/16”
3/32”
AT106A
Rivet Set, Flush, Swivel-type
1-1/4 in. diameter, with rubber guard and retainer spring
AT121
All Rivet Sets have a shank diameter of .401"
unless otherwise specified
Other accessories available including:
AT107A-2D
PEENING TOOL
ALUMINUMBRASS-NYLON
AT595 SERIES
ANGLE
ATTACHMENT
AT114C-3
QUICK CHANGE
RETAINER SPRING
AT115-SERIES
RETAINER SPRING,
BEHIVE TYPE
AT140A-SERIES
HI-SHEAR RIVET
KNOCK-OUT PUNCHES
AT119D-SERIES
FLUSH RIVET SET,
STUBBY TYPE, .401
SHANK
AT141A-SERIES
KNOCKOUT PUNCHES
AT1206-6
FLAT CHISEL GUN SET,
.401 SHANK
ST1111B-V401-V498
RIVET SET ADAPTER
SLEEVE, .401 SHANK
AT2165-SERIES
GUN-TYPE CHISEL
FOR HUCK LOCKBOLTS
AT124B-3
SHANK ADAPTER , .401
SHANK
AT134GA
GOOSENECK TYPE
ADAPTER,
AT1757
AT1758
CUPPED TYPE
FLUSH TYPE
CONTACTS
GLOBAL HEADQUARTERS
EUROPEAN HEADQUARTERS
Click on the Contact Name for E-Mail Address
27727 Avenue Scott ● Valencia ● CA91355
Phone (661) 775-7200 ● Fax (661) 295-0695
Domestic Sales: Shelley Johnson
Airline Sales: Jane Muhich
Pacific Rim Sales: John Cho
Government Sales: Bill Helfer
General Inquiries: Lisa Robinson
Park Mill Way ● Clayton West
HUDDERSFIELD ● HD8 9XJ ● U.K.
Phone +44 (0)1484 867700 ● +44 (0)1484 867711
Commercial Director: Fred Short
General Sales Manager: Simon Donovan
Technical Sales Manager: Mark Johnson
Tooling & Product Support: Peter Lewis
REGIONAL SALES OFFICES
U.S.A.
ARIZONA ● Mesa
(480) 894-5139 ● Fax (480) 894-5424
Contact: Cyndi Hill
TEXAS ● Ft. Worth
(817) 293-2361 ● Fax (817) 293-2364
Contact: Shirley Warner
FLORIDA ● Orlando
(407) 888-5700 ● Fax (407) 888-5730
Contact: Dana Wilkin
WASHINGTON ● Auburn
(253) 939-1881 ● Fax (253) 939-6508
Contact: Sheryl Knights
QUEBEC ● Boisbriand
(450) 971-6777 ● Fax (450) 971-6888
Contact: Pascale Bouchard
NEW YORK ● Glen Cove
(516) 759-9001 ● Fax (516) 759-9299
Contact: Franke Derasmo
FRANCE
77350 Le-Mée-sur-Seine
+33-(0)1-64-83-00-90 ● Fax: +33-(0)1-64-83-00-91
Contact: Lionel Lantier
GERMANY
28199 Bremen
+44 (0) 421 16328-0 Fax: +44 (0) 421 1632828
Contact: Björn Anders
CANADA
ONTARIO ● Mississauga
(905) 890-2940 ● Fax (905) 890-1561
Contact: Oscar Jacela
INSTALLATION TOOLING GROUP
6701 Will Rogers Blvd. ● Ft. Worth ● TX76140
Phone (817) 293-2361 ● Fax (817) 293-6623
Contact: Tommy Crow
OUTSIDE SALES CONTACTS
Park Mill Way ● Clayton West
Huddersfield ● HD8 9XJ ● U.K.
Phone +44 (0)7990 586578 ● +44 (0)1484 867711
Contact: Peter Lewis
Director of Outside Sales: Brad Strella
Office: (407) 382-3455
Fax: (407) 382-3612
Mobile: 407-492-0654
Northern CA, CO
Contact Mark Arrietta
Fax: (661) 298-7761
Mobile: (661) 803-1586
Southern CA, UT
Contact Diann Ison
Fax: (310) 796-0662
Mobile: (310) 994-9677
IN, IL, OH, MI, WI
Contact John Ratcliffe
Office: (770) 486-9846
Fax: (770) 631-7842
Mobile: (770) 329-6265
WA, OR, ID, MI, WY, NV, AZ, NM
Contact Mike Granese
Office: (360) 387-8170
Fax: (360) 387-8195
Mobile:(206) 295-6657
MD, Washington DC, DE, NJ, PA
Contact Jim Hodnett
Office: (610) 692-1360
Fax: (610) 692-1369
Mobile: (484) 431-0721
Canada, ND
Contact Pat Sawyer
Office: (204) 389-2117
Fax: (204) 389-2308
Mobile: (204) 227-3066
TX, MO
Contact Dan Brown
Office: (817) 473-1157
Fax: (817) 453-9734
Mobile: (817) 915-6633
NY, VT, CT, RI, NH, MA, ME
Contact John Kinsky
Office: (860) 653-8141
Fax: (860) 653-6263
Mobile: (860) 830-0907
TX, KS, OK, AR, IA, MN, SD, LA, NE +
Tooling Support
Contact Dan Barnes
Fax: (817) 293-6623
Mobile: (817) 312-3651
FL, AL, MS, SC, NC, GA,
WV, VA, KY, TN
Contact Jack Windle
Office: (772) 464-3818
Fax: (772) 464-0697
Mobile: (772) 595-7818
France
Contact: Gerard Galloppe
Office: +33 (0)1-64-83-00-90
Fax: +33 (0)1-64-83-00-91
Mobile:+33 (0)6-80-70-82-06
UK & Rest of Europe
Contact: Mark Johnson
Fax: +44 (0)1484-867711
Mobile: +44 (0)7880-722980
Disclaimer: Whilst every precaution is taken, Wesco Aircraft is not able to guarantee this CD is free of viruses and other files of a
malicious nature, and as such declines any responsibility for damage to the user’s computer equipment, however caused.
© Copyright, Peter Lewis Wesco Aircraft Tool Division
Apologies & Disclaimer
We’d like to apologise – we’ve been unable to include the requested item in this edition of
the Tooling Catalog.
Click here to return to the help page. Or use Adobe PDF’s Search facility (the binocular icon
in older versions or Shift-Ctrl-F) to look at other similar items.
Or call one of the tooling division contacts on the previous page.
We’ll be happy to answer any question you may have or to hear any suggestions you may
have for improving this catalog.
Disclaimer:
In our previous paper catalog we reproduced, with permission, many pages from manufacturer's own publications, and this latest
edition follows a similar philosophy.
We have therefore included electronic versions of a considerable number of ‘public domain’ documents without alteration to content,
and with only the addition of Bookmarks in the left hand panel for the purpose of navigating within and between documents.
Wesco Aircraft accepts no responsibility for any errors contained in these documents, nor for any loss, damage, injury, either directly
or indirectly caused by the user following the information therein. In the event of doubt the user MUST verify with the tooling
manufacturer's own personnel as to the suitability of a tool for a particular application.
Copyright for these documents remains with each tool manufacturer and all rights of reproduction are reserved by them.
Wesco Aircraft takes every precaution against the introduction of malicious software, however no responsibility can be accepted for
any damage to the user's computer equipment or network, or loss of data, as a result of viruses, worms or other forms of malicious
software. You are strongly advised to use the latest virus blocking and firewall software at all times.
If you discover any errors of fact, or areas of ambiguity, or indeed any other problem with the content of this catalog please contact
the Tool Division of Wesco Aircraft. We will do our best to correct future editions.
© Copyright, Peter Lewis Wesco Aircraft Tool Division

Wesco Aircraft Tooling Catalog (February2008)

Transcription

Similar documents

to - 7mb

Craig Tools International Ltd

PDF Catalogue

aero tools - Hawker Richardson