Hitachi HX99B-2 rups hoogwerker

HX Crawler type aerial platform
Crawler Type Aerial Platform
A P P L I C A T I O N
&
A T T A C H M E N T
9.7m Platform Height
Low exhaust gas emissions.
Low noise design.
Compact dimensions and small
rear-end swing radius allows
entry into tight work sites.
Excellent inching control
provided by pilot hydraulic
control system.
Overload warning system
If the load exceeds 120% of the
rated load, the overload warning
system works to stop normal
movements, and warns of overload
through the lamp and buzzer.
Operating panel designed for safety
(Upper control panel)
Notes : Photos include optional equipment. Some of the photos in this brochuer show an
unmanned machine with attachments in an operating position. These were taken
for demonstration purposes only and the actions shown are not recommended
under normal operating conditions.
_004OB_KA-EN116EU_HX99B.indd 1
29/03/2010 16:58:46
WORKING RANGES
1 530
Unit: mm
1 040
2 400
9 700
8 300
R1 000
2 000
1 200
1 960
200
400
150
1 450
620
2 300
1 560
: Travel not Possible
5 250
SPECIFICATIONS
Model
Maximum work platform height
mm
HX99B -2
9 700
Maximum horizontal reach
mm
8 300
Maximum allowable load
Work platform turning angle
Machine weight
Shoe width
kg
200
degree
90 (either direction)
kg
5 400
mm
400 (rubber shoes)
Speed
Boom raise/lower
s
raise 40, lower 44
Boom extend/retract
s
extend : 20, retract : 20
Swing
min-1(rpm)
Travel
km/h
Work platform turn
0.8 (0.8)
high : 1.8, low : 1.1
degree/s
45 / 4
Engine
Model
Kubota D1105-K2A
Type
Rated flywheel horsepower
Water-cooled, 3-cylinder swirl combustion chamber type diesel engine
kW/min-1(PS/rpm)
13.6 / 2 200 (12.5 / 2 200)
Service refill capacities
Fuel tank
L
66
Hydraulic oil tank
L
67
These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in color and features.
Before use, read and understand the Operator’s Manual for proper operation.
Hitachi Construction Machinery
www.hcme.com
KA−EN116EU
Printed in the Netherlands
_004OB_KA-EN116EU_HX99B.indd 2
29/03/2010 16:58:54