Part name - Alpha Therm GmbH

Version 0.96(2015.08.25)
Design of practical utility No. 0301508
Registration of desing No. 0316273
User's Manual
Part name
Humi./Temp. mode changing
Digital Humidity Controller
1
Caution1.
Humi./Temp. diplay mode
This product is a humidity controller, temperature is displayed in add-ons.
Output
Setting(UP)
Setting(DOWN)
Humidity display(FOX-1SH(R)model)
Setting key(SET)
Temperature display(FOX-1SH(R)model)
The temperature is display only, please note that control is not.
1
1
H. sensor
T/H sensor
Present temp. & humi.
only
output deviation
changing menu
Model Composition
Model
Output
Sensor
Range
communi.
setting range
Sensor input correction menu
Setting range
%
series
series
Available
selection
of function
%
Sensor heating menu
Cautions for your safety
setting range
H(humidity)/d(dehumidity)
.
Product specifications and accessories may be changed at any time
based on improvements and other reasons.
Setting range
Setting range
Ref 1. If press for more than 5 sec in the current state, the program setting mode to enter.
CAUTION
Ref 2. All the program after setting, if press for more than 3 sec or after 60 sec, automatically return
to the current of humidity display after displayed O-K.
model applied
SAFETY
Setting range
Present temp. & humi.
output deviation
changing menu
Sensor input correction menu
setting range
Setting range
selection
of function
setting range
H(humidity)/d(dehumidity)
sensor
Ref 1. If press for more than 5 sec in the current state, the program setting mode to enter.
Ref 2. All the program after setting, if press for more than 3 sec or after 60 sec, automatically return
to the current of humidity display after displayed O-K.
1
Application
Applicationfor
forhumidity
humiditycontroller
controller
33
User’s setting humidity changing
Program setting
present humidity
User’s setting humidity
changing
Program setting
4747
present humidity
3
(dehumidity)
present humidity
present humidity
setting
humidity
User’s setting humidity changing
1~19
setting
humidity
present humidity
setting
humidity
ON : present humidity
OFF : present humidity
setting humidity +DIF
setting humidity
Program setting
ON : present humidity
OFF : present humidity
setting humidity -DIF
setting humidity
3
In the event that ERROR is indicated during the use of a product
Program
setting of the various internal
User’s In
setting
humidity
case
of changing, the memory
elements
data are damaged due
to the strong noise from outside.
present humidity
In this case, request the after-sale service to our company.
As for this regulator, the supplementation measures are
established against the above noise, however, it cannot
endure noise unlimitedly. If noise flows in (more than
2KV), the interior can be damaged and destroyed
In case of
, a failure in the data communication with
the sensor. Please check connection state, connection
order, short-circuit and disconnection. If it is not resolved
even after checking, please contact dealer or us.
g
p
p
or
will be displayed when humidity exceeds
the display range. Request to our A/S when it displayed
in the same error even if keeping the surrounding humidity
to a normal state.
1
an
1
(shield)
Quality Warranty: 1 year from the date of purchase
The specifications of the above product are subject to
change without a prior notice to improve the performance
of the product. Please comprehend the contents specified
in the above precautions, and observe them without fail.
Regarding the manual in English, please download it at
our website.
(shield)
Alpha Therm GmbH
Gewerbering 7
68723 Plankstadt
Germany
(shield)
0
Phone: (+49) 6202 / 575688 - 0
Fax: (+49) 6202 / 575688 - 0
E-Mail: [email protected]
Web: www.alpha-therm.com