WORKS HARD. WORKS SMART.

Transcription

Knaack secure jobsite storage
™
WORKS HARD.
WORKS SMART.
peace
For over 50 Years, Knaack Secure Jobsite Storage has had the
strongest work ethic around — and the smartest. Not only does every
box, chest and cabinet cause tool thieves to strongly reconsider,
KNAACK Secure Jobsite Storage also provides easier access, better
organization, easy mobility, and versatility.
™
™
Table of Contents
Secure Jobsite Storage
03
New Features
04
Monster Box Series
05
™
STORAGEMASTER
06 - 07
Chests
08 - 09
™
JOBMASTER Chests
10
KNAACK SECURITY? It's a lock.
Chest Accessories
11
Accessory Casters
12 - 14
All KNAACK products, except the Monster Box
Series, are designed for use with the Commercial
Master Lock No. 5 or equivalent sized lock.
™
Cabinets
15
Field Station
16 - 19
Rolling Work Benches
20 - 21
Classic Line
22
Extras That Work
23
Replacement Parts
™
™
®
• The WATCHMAN IV Lock System, with recessed
housing, prevents bolt-cutter break-ins.
™
• One-time lock installation means no downtime
replacing locks.
• The Commercial Master Lock No. 5 has a
hardened steel plate bottom with an hourglass
keyhole opening that provides drill resistance for
added security.
®
Note: Locks are not included.
Master Lock is a trademark of Master Lock Company, LLC.
®
02
Secure jobsite Storage
of mind
Monster Box Series, available in piano, chest, and cabinet styles, offers maximum
security, weight capacity, and organization. These boxes can be easily transported
to the highest floor with our exclusive four-point crane lift system.
™
See page 5 for more product information.
STORAGEMASTER Chests are the workhorses on any jobsite, ideal for every trade —
mechanical, plumbing, HVAC, electrical, rough and finish carpentry. They’re caster–
ready and include full-width shelves for organization of small to large tools and
supplies. Model 91 even features a drop-down ramp for loading large, heavy items.
™
See pages 6-7 for more product information.
JOBMASTER Chests, available in multiple models, are the jack-of-all tradesmen
chests. They’re versatile and portable — especially with accessory casters —
and hold anything from hand and power tools to compressors.
™
JOBMASTER Cabinets are incredibly secure and configurable for any need.
They act as a remote tool crib and offer “glance and grab” organization.
™
Field station serves as your jobsite office. Use it to securely store tools,
supplies, documents, and more.
See page 15 for more product information.
Rolling Work Benches are secure storage on wheels. The heavy-duty top works
great as a work surface and for mounting pipe threaders or vices.
03
Four-Way Skids
We’ve taken the new Four-Way Skids — already
included on the new Field Station 119-01 — and
included them on all STORAGEMASTER Chests,
JOBMASTER Chests and Cabinets, KNAACK CLASSIC
Storage Chests, and the Monster Box Series.
™
™
™
™
• Improves Mobility – Forklifts can now gain
access from all sides, making it easier to
move the boxes around the jobsite and in
the warehouse.
• Improves Productivity – Four-way skids make
casters easier and faster to attach with a bolt/
nut fastener system than the previous thread
cutting bolts. Casters will include fastener kits
for both two-way and four-way skids.
A separate bolt/nut kit (7763) for use on the
four-way skids is also available.
• Improves Durability – The new four-way
skids are made of 7-gauge steel, improving
skid durability. And the bolt/nut combination
attaches the caster even more securely
to the skid.
Crane Lift Accessory Kit
Introducing a fast and easy option for added jobsite mobility, productivity, and safety.
Our Crane Lift Accessory Kit is now available for use on most* KNAACK Jobsite Storage Equipment.
™
•Accessory kit includes four lift brackets, mounting hardware, and installation instructions
•Heavy-duty carbon steel construction with weather-resistant, black enamel paint
•Field Station 119-01 has pre-punched holes to accommodate lift bracket;
other products require holes to be drilled
•Tested and approved only for KNAACK jobsite boxes
™
•CE certified
Model: 497
Lifting Capacity (including box): 2500 lbs.
Product Weight: 16.6 lbs.
Width: 8"
Depth: 9"
Length: 14"
*Available for all KNAACK products except Rolling Work Benches,
Monster Box line, Models 100 and 3068
™
04
Monster Box series
™
What makes it
Monster Box ?
™
Exclusive heavy-duty tubular steel frame,
an industry first, provides structural
rigidity and strength and “caps” the lid
for more security.
Four-point crane lift system facilitates
center-point rigging to hoist more safely than
with two-point/bar lift systems providing
2500 lbs. gross weight load capacity.
Integrated recessed lock is the only
UL-rated drill-resistant, weather-resistant
lock in the jobsite storage category, making
it virtually impervious to drilling and pry-in.
Heavy-duty hinges are extra durable and
resist pry-ins.
Power Pass electrical pass-through
grommet provides easy, weatherproof power
cord access to allow battery charging when
the box is closed.
Exclusive non-linear three-point latching
system incorporates a recessed handle
that operates the hook lock, while the other
two latching points function as dead bolts.
™
1
Piano box
Chest
Cabinet
Model 1000
Model 1010
Model 1020
30"
80"
61"
58 1/2"
54 1/2"
36"
54 1/2"
66"
30"
66"
66"
30"
• Top shelf is 10 1/2" from top of cabinet lip,
second shelf measures 7 1/2" from bottom
of top shelf, bottom shelf is adjustable for
easy storage of bulky items
• Low center of gravity provides stability
• Gas spring guards protect springs from
shifting-load damage
• Two shelves for extra storage and
organization
•Interior storage grid for hanging safety
gear and other items
• Deep cover design for strength
and security
• Open design, without center post, for
maximum storage and accessibility
• Two recessed handles for safer closing,
even with gloves on
• Heavy-duty single cover support for
easy closing
• Weather sealed doors for improved
weather resistance
Capacity: 48 Cu. Ft.
Ship Wt: 405 lbs.
Ship Wt: 400 lbs.
Ship Wt: 400 lbs.
1. Knaack encourages the registration of product and key codes for replacement keys. Keys cannot be duplicated and will be sold only to the registered owner. Boxes can be keyed alike upon request.
SEE ALSO:
Accessory Caster Sets on page 11.
05
Nothing works harder or smarter than
STORAGEMASTER Chests when it comes to
secure jobsite storage, durability, and ease
of use. Consider these key features when
you’re looking for an ultra-rugged piano box.
™
A
WATCHMAN IV Lock System with
3-point latching and recessed lock
housing for the ultimate protection against
pry-ins. One-time lock installation means no
downtime replacing locks.
B
grommet for easy weatherproof power
cord access.
C
Reinforced lock housing provides
unbeatable strength.
D
Heavy-duty hinges are staked and
welded to stand up to any amount of prying.
D
™
™
B
STORAGEMASTER Chests
also feature:
™
• Recessed handles for positive gripping even
with a gloved hand
C
A
• Baked-on powder coat finish for weather
resistance and durability
• Protected gas springs to prevent damage from
shifting loads
• Caster-ready 4-way skids constructed of
heavy duty 7-gauge steel (see page 11 for
optional casters)
• Heavy-duty 16-gauge steel construction with
fully arc-welded seams
06
Storagemaster
™
StorageMaster Chests
™
Model 91
A
Model 90
Model 89
78"
78"
78"
46"
49"
46"
49"
30"
48"
46"
49"
72"
30"
Features a built-in,
12-gauge steel ramp
to make loading large,
bulky items easy.
Capacity: 57.5 Cu. Ft.
Ship Wt: 409 lbs.
72"
30"
Ship Wt: 380 lbs.
60"
Ship Wt: 337 lbs.
Model 79
Model 69
78"
66"
37"
49"
34"
46"
30"
30"
Ship Wt: 287 lbs.
SEE ALSO:
48"
60"
When cover is closed,
Model 69 chest can be
used as a work table.
Ship Wt: 282 lbs.
07
Security and durability to go. JOBMASTER Chests
are tool storage solutions that are as easy to
handle as they are tough. They’re compact enough
to be lifted and moved around the jobsite or into a
work vehicle with minimal effort. Yet, JOBMASTER
Chests include all the same security features as
STORAGEMASTER Chests.
™
A
™
™
A
WATCHMAN IV Lock System with
3-point latching and recessed lock
housing for the ultimate protection against
pry-ins. One-time lock installation means no
B
grommet for easy weatherproof power
cord access.
C
Reinforced Lock Housing provides
unbeatable strength.
D
Heavy-Duty Hinges are staked and
welded to stand up to any amount of prying.
™
™
D
B
C
JOBMASTER Chests
also feature:
™
with a gloved hand
optional casters)
08
A
Jobmaster
™
JobMaster Chests
™
Model 4830
Model 2472
Model 60
61 1/4"
49 1/4"
49 1/4"
23"
23"
29"
72"
24"
30"
48"
Ship Wt: 194 lbs.
Closed Height: 34 1/4"
Ship Wt: 216 lbs.
Ship Wt: 190 lbs.
Model 42
Model 4824
49 1/4"
Model 36
34 1/2"
18"
23"
19"
48"
42"
16"
19"
36"
Capacity: 9 Cu. Ft.
Ship Wt: 114 lbs.
SEE ALSO:
13"
19"
32"
• Does not have 3-point
latch or Power Pass
• Does not have 3-point
latch or Power Pass
Capacity: 7 Cu. Ft.
Ship Wt: 97 lbs.
Capacity: 5 Cu. Ft.
Ship Wt: 84 lbs.
™
Ship Wt: 158 lbs.
Model 32
37 1/2"
39 1/2"
24"
60"
24"
™
09
Welders box Model 30
Storage box Model 28
12"
12"
30"
28"
16"
12"
• Designed to hold welders gloves, goggles, tools, and rods
• Fully arc-welded for extreme strength
• Spot-welded construction
• Optional tool tray Model 51 available below
• 16-gauge steel
• 16-gauge steel
• Baked-on powder coat finish
• Baked-on powder coat finish
Ship Wt: 38 lbs.
Ship Wt: 32 lbs.
Accessory Trays
Tool Tray Model 51
These handy lift-out
trays keep tools
organized and
ready to go. No
more digging
around the bottom
for what you need.
3"
27 5/8"
11"
Fits: 28
Ship Wt: 11 lbs.
4"
27 5/8"
Fits: 4830
Ship Wt: 11 lbs.
Tool Tray Model 21
8"
Tool Tray Model 41
4"
21 5/8"
8"
Fits: 2472, 4824, 60
Ship Wt: 9 lbs.
10
Tool Tray Model 31
4"
16 5/8"
8"
Fits: 32, 36, 42
Ship Wt: 7 lbs.
Accessories
Accessory Caster Sets
Load ratings are for all
four wheels combined. Rating
includes weight of KNAACK
product and its contents.
Each caster set includes two
rigid and two swivel casters
with mounting bolts. Caster
sets with brakes have the
brake unit located on the
swivel casters. KNAACK
casters are recommended for
use with KNAACK products.
Casters include bolt kits for
both 2-way and 4-way skids.
4" CasterS
6" CasterS
™
™
™
Model: 495 (with brakes)
Solid Polypropylene HD
Wheel Width: 2"
Set: 2 Rigid, 2 Swivel
Load per Set: 1600 lbs.
Fits Models: 32, 36, 42, 60, 69, 79, 89,
90, 91, 2032, 2048, 2060, 2472, 3068,
4824, 4830
5" CasterS
Visit www.knaack.com/replacementparts
to find the correct accessories and
replacement parts for your product.
Caution: Caster brakes are not
suitable for keeping the units in place when
transporting. Secure by another method. Do
not use casters on rough or uneven surfaces.
Do not tow caster-mounted boxes.
Solid Polypropylene HD
Wheel Width: 2"
Fits Models: All Models
Model: 505 (no brakes)
Hard Rubber
Wheel Width: 1- 1/4"
Non-marking Polyurethane
Wheel Width: 2"
Phenolic HD
Wheel Width: 2"
Fits Models: 32, 36, 42, 60, 69, 79, 89,
90, 91, 2032, 2048, 2060, 2472, 3068,
4824, 4830
11
No matter how big the job, roomy JOBMASTER
Cabinets work. They provide at-a-glance, easy-access
shelving storage for small, big, and in-between
tools, equipment, and supplies. Optional accessories
like casters and door shelves create custom
solutions that work even harder.
™
A
WATCHMAN IV Lock System
with 3-point latching and recessed
lock housing for the ultimate protection
against pry-ins. One-time lock installation
means no downtime replacing locks.
B
Convenient foot latch opens the
doors when you step on it, allowing
hands-free operation
C
™
C
Deep door design for maximum pry-bar
resistance and better tool organization.
A
JOBMASTER Cabinets
also feature:
™
with a gloved hand
optional casters)
B
• Optional door shelves allow for greater
organization
12
Jobmaster
™
Half-Width Shelf Cabinets
Model 112
Model 111
• Includes: Three 2 1/2" deep
drawers with 50 lb. load
capacity, four 6" drawers
with 75 lb. load capacity
• Powder-coated drawers roll
on ball bearing slides
• Full top shelf for more
storage
• Shelf spacing from top
down: 13", 12 /4", 9 /2",
19 /4"
57"
60"
1
60"
30"
• More open space for large
items
• Half-width shelves on left
side only
• Top shelf is 13" from top
of cabinet, second shelf
is 12 1/4" from top shelf,
bottom shelf is 9 1/2" from
second shelf
57"
60"
1
3
24"
60"
• Ability to add accessory
door shelves
Ship Wt: 670 lbs.
door shelves
Ship Wt: 385 lbs.
Full-Width Shelf Cabinets
Model 139
Model 109
• Full-length shelves allow you
to organize longer items
measures 10" from bottom
of top shelf
• Adjustable bottom shelf
57"
60"
60"
30"
Ship Wt: 445 lbs.
SEE ALSO:
Door Shelf on page 14.
• Ability to add accessory door
shelves
57"
60"
24"
60"
• Full-length shelves allow
you to organize longer
items
measures 10" from bottom
of top shelf
• Adjustable bottom shelf
door shelves
Ship Wt: 394 lbs.
13
BIN STORAGE Cabinet
Model 129
DOUBLE-SIDED Shelf Cabinet
Model 99
57"
48"
60"
51"
72"
60"
30"
24"
Doors open on
both sides!
• Perfect for storage of fittings and bulk parts
• Each shelf has a 2" hemmed lip to keep parts from spilling out
• Double doors on front and back
• Fully open top shelf
• Full-length top shelf allows you to organize longer items
• 18 separate bins
• Doors on front only
• Top shelf is 14" from top of cabinet, second shelf measures 10" from bottom
of top shelf, bottom shelf is adjustable for easy storage of bulky items
Ship Wt: 452 lbs.
Ship Wt: 519 lbs.
Rolling cabinet Model 100
DOOR Shelf model 493
2 1/2"
60"
60"
23"
58 "
1/2
3"
• Accessory shelf for the left inside door
provides additional storage and organization
• Fits models 99, 109, 111, 112, 139
65"
Ship Wt: 3 lbs.
Approximately 125" wide when fully opened
DOOR Shelf model 494
2 1/2"
• Included casters allow one person to maneuver the closed cabinet through a jobsite
• Shelves are 14" deep with a 1" hemmed lip, and welded in place with a 12 7/8" minimum spacing
between shelves
• 16-gauge fully arc-welded steel construction
• Load capacity: 1200 lbs. evenly distributed
• Vertical storage area features a bracket for hanging extension cords or tool belts
Ship Wt: 470 lbs.
14
23"
3"
• Accessory shelf for the right inside door
provides additional storage and organization
• Fits models 99, 109, 111, 112, 139
Ship Wt: 3 lbs.
Field Station
NEW
uct
field Station Model 119-01
Prod
Think of it as command central. It’s first to the jobsite and
last to leave and holds everything that’s needed day-to-day —
from tools and equipment to essential supplies, drawings, and
documents. When the work day is over, the field station locks
up tight as a drum for secure overnight storage.
3
A
NEW! WATCHMAN 5 Lock System features
heavy-gauge double latches and a vertically mounted
recessed lock that resists drill-outs, prying, and cutting
for superior tamper- and weather-resistance.
B
NEW! Heavy-duty vault-style hinges.
Bottom doors interlock with body to provide
maximum pry-resistance.
C
NEW! Locking storage hatch with power
pass-through protects valuables while Field Station
is open. Also locks in open position.
D
NEW! Thicker 14-gauge steel bottom
that eliminates the possibility of fork lift
damage during transport.
2
4
1
C
™
Optional Accessories:
A
1
NEW! Heavy Duty Metal Side Shelf
Side shelf hooks onto included accessory brackets.
Model: 492 (18” W x 5¾” D x 3” H)
B
2
Model: 482 (4¾” L x 3½” W x 2¾” H)
Model: 485 (10¼” L x 33⁄8” W x 3¾” H)
46"
82"
3
NEW! LED Light Kit LED light kit features bright
(600 lumens) waterproof light bar, power adapter and
mounting hardware, which attaches to the standard light
bracket. Model: 498
4
NEW! Lockable Shelf Door Lockable shelf
door that doubles as a whiteboard. Includes side walls
for complete security Model: 488
47"
D
44"
Storage Capacity:
120.7 Cu. Ft.
SEE ALSO:
Door Shelf on page 14.
60"
Ship Wt:
678 lbs.
NEW! Storage Bins Short and long storage bins
hang from side wall bracket or under shelves. (sets of 4)
15
D
Sturdy. Mobile. Secure. STORAGEMASTER Rolling
Work Benches carry the load in more ways than
one. They’re not only load-rated for a half-ton,
but they’re efficiency centers on the jobsite,
providing handy work surfaces and organized
storage that go wherever work needs to be done.
™
A
WATCHMAN IV Lock System
with recessed lock housing for the
ultimate protection against pry-ins.
One-time lock installation means no
B
A
™
B
Heavy-duty steel construction
with fully arc-welded seams.
C
Full-length staked piano hinges
resist pry-ins.
D
Baked-on powder coat finish
for weather resistance and durability.
C
CAUTION:
Caster brakes are not suitable for keeping
the units in place when transporting. Secure
by another method. Do not use casters on
rough or uneven surfaces. Do not tow castermounted boxes.
16
Storagemaster
™
StorageMaster Rolling work benchES
™
Model 49
Model 45
30 1/2"
30 1/2"
37 1/2"
37 1/2"
25"
Load Capacity: 1000 lbs.
Ship Wt: 352 lbs.
25"
46 1/4"
(3) Model 471-3, 1" deep drawers
(4) Model 472-3, 2 1/2" deep drawers
(1) Model 477-3 shelf
(1) 6" caster set
Ship Wt: 296 lbs.
Model 47
30 1/2"
46 1/4"
(4) Model 474-3, 4 1/2" deep drawers
(1) 6" caster set
Mechanic's Chest Model 63
30 1/2"
37 1/2"
37 1/2"
25"
46 1/4"
•Basic unit
•No drawers
•Use this model to design your own
Rolling Work Bench (see p. 19)
(1) 6" caster set
Ship Wt: 229 lbs.
25"
46 1/4"
(4) Model 472-3, 2 1/2 " deep drawers
(1) Model 476-3, 6" deep drawer
• Red, baked-on powder coat finish (1) Model 477-3, 1" deep shelf
(1) 6" caster set
(1) Rubber mat
Ship Wt: 352 lbs.
•6" non-marking polyurethane
caster set is included
17
Storagemaster HD rolling Work benches
™
Our heavy-duty work benches are ready
to take on extra-large loads — up to 2,700
pounds — and move where they’re needed
while providing almost 10 square feet
of work space.
• WATCHMAN IV Single Lock System
™
• 7-gauge steel work top and
cabinet bottom
Model 59
Model 58
31 1/4"
31 1/4"
37 1/8"
37 1/8"
26"
26"
54 1/4"
• Permanently welded 12-gauge
steel shelves
• Heavy-duty 6" caster sets are
included (caster model 600)
• Standard drawer capacity is 100 lbs.,
heavy-duty drawer capacity is 200 lbs.
54 1/4"
(3) 1" Std. Duty Drawers
(4) 2 1/2" HD Drawers
(1) 6" HD Drawer
(1) 6" caster set
(1) 2 1/2" HD Drawer
(1) 6" HD Drawer
(1) 9 1/2" HD Drawer
(1) 6" caster set
Ship Wt: 641 lbs.
Ship Wt: 591 lbs.
War wagon Rolling work bench
™
Model 62
62"
32"
Got a challenge? This big boy is up for it,
with an ability to accommodate over 2.5
tons of whatever you want to load into it.
Its large, 13-square-foot work area and lower
working height more conveniently positions
your equipment when you attach a vise or
pipe threader.
26"
34"
• WATCHMAN IV Single Lock System
™
• Three doors in front and three in back for the
ultimate accessibility
• 12-gauge steel body, fully arc-welded
• 7-gauge steel work top and bottom panel
• Standard drawer capacity is 100 lbs.,
heavy-duty drawer capacity is 200 lbs.
18
Ship Wt: 597 lbs.
(1) 6" Heavy Duty Drawer
(1) 9 1/2" Heavy Duty Drawer
(1) 8" caster set
STORAGEMASTER
™
Design your own package
It’s easy to make STORAGEMASTER
Rolling Work Benches accommodate
various job situations with optional
shelves and drawers configured the
way you want them.
™
Optional Shelves
and Drawers
Load capacity is 100 lbs. each
All drawers come with attached glides.
1" Deep Shelf
Model: 477-3
Size: 17 /2"W x 21 /4"L x 1"D
Ship Wt: 10 lbs.
Notch required: 1
1
3
1" Deep Drawer
Start with Model 47
Model: 471-3
Size: 16"W x 22"L x 1"D
Ship Wt: 13 lbs.
Notch required: 1
2 1/2" Deep Drawer
Model: 472-3
Size: 16"W x 22"L x 2 1/2"D
Ship Wt: 16 lbs.
Notches required: 2
4 1/2" Deep Drawer
Model: 474-3
Size: 16"W x 22"L x 4 /2"D
Ship Wt: 18 lbs.
Notches required: 3
1
6" Deep Drawer
Model: 476-3
Size: 16"W x 22"L x 6"D
Ship Wt: 20 lbs.
Notches required: 4
•Fifteen notches in the cabinet door space
for mounting drawers
•You can put together any combination
of standard drawers as long as the sum
of the notches doesn’t exceed 15
* Place larger drawers to the bottom of the cabinet to avoid tipping.
19
KNAACK CLASSIC Storage Chests and Rolling Work
Benches provide great value, versatility, secure
storage, and efficiency on jobsites, as well as at
home. Models 2048 and 2060 can also take to the
road in any full-size pickup truck.
™
CLASSIC STORAGE Chests
feature:
with a gloved hand
• Baked-on powder coat finish for
weather resistance and durability
optional casters)
20
Classic Storage
Classic Storage Chests
Model 3068
Model 2060
Model 2048
49 1/4"
37"
49 1/4"
22 1/2"
60"
30"
Model 2032
34 5/8"
23"
24"
60"
23"
24"
13"
19"
48"
32"
•Double lock system
•Slanted top allows easy access
to contents
•Permanently welded built-in tray
measures 11"W x 60"L x 2 1/2"D
Storage Capacity: 31 Cu. Ft.
Ship Wt: 225 lbs.
•Inset skids allow chest to fit into
8' bed pickups
•Fits perfectly into full-size pickups
•Built-in tray not included
measures 5 1/2"W x 60"L x 3 5/8"D
measures 5 1/4"W x 48"L x 3 5/8"D
•Optional model 41 tool tray
available (see p. 10)
Ship Wt: 180 lbs.
Closed Height: 28"
Ship Wt: 145 lbs.
Closed Height: 28"
Ship Wt: 77 lbs.
Classic ROlling Work Benches
• WATCHMAN IV Single Lock System,
a KNAACK exclusive, saves you time
and money with a one-time install
• Recessed padlock housing deters bolt
cutters, pry bars, and hack saws
• Heavy-duty drawers are rated for 50
lbs. and operate on ball-bearing slides
• Two 4" swivel casters and two 4" rigid
casters are included with each bench
• Shelf is welded in place for maximum
strength
Model 44
™
™
SEE ALSO:
Model 40
40 3/4"
33 1/2"
37 1/2"
40 3/4"
33 1/2"
37 1/2"
25"
25"
•Includes four drawers and a half-width shelf
•Includes two drawers and a full-width shelf
•Shelf clearance measures 14" from bottom of
cabinet to bottom edge of shelf and 16" from
top of shelf to top of cabinet
•Shelf clearance is 14" from bottom of cabinet
to bottom edge of shelf and 8" from top of
shelf to bottom of drawer
Ship Wt: 240 lbs.
Ship Wt: 210 lbs.
21
26" Hand Held
Tool Box
Model 743
22" Hand Held
Tool Box
Model 742
20" Hand Held
Tool Box
Model 741
9"
9 1/2"
9"
11"
8"
8"
22"
20"
26"
•18-gauge steel
•18-gauge steel
•18-gauge steel
•Removable steel tool tray included
•Chrome-plated handle and latches
Storage Capacity: 1.5 Cu. Ft.
Ship Wt: 27 lbs.
Ship Wt: 22 lbs.
Storage Capacity: .75 Cu. Ft.
Ship Wt: 17 lbs.
Wall Cabinet model 33
Work table Model R-72
36"
36"
16"
32"
72 1/2"
•Ideal for locking up small parts, tools, and supplies, and can
be used almost anywhere in the shop or on the job
•Holes are pre-punched in the back (on 16" and 24" centers)
for easy mounting to walls
27 1/2"
•Ideal for the shop or special fabrication areas on the jobsite
•10-gauge steel work top
•A key lock combination with 2-point latching helps prevent
unauthorized access
•14-gauge steel legs
Storage Capacity: 10.75 Cu. Ft.
Ship Wt: 81 lbs.
Load Capacity: 750 lbs. evenly distributed
Ship Wt: 136 lbs.
22
•Foldable legs for easy transport
WATCHMAN IV
Lock System
7286-1PK
™
•Fits all current models and
secures padlock in place
•Introduced with dead-bolt
lock system in 2000
•Package includes installation
instructions
Genuine KNAACK
Aerosol Paint
953-1CN
™
•Trademarked tan color
•For touchup on all
KNAACK products
™
WATCHMAN III
Lock System
800-1PK
™
•Fits all previous generation
models and secures padlock
in place
•Package includes installation
instructions
Gas Springs
977-2PK
•Fits models 89, 90, 91, 119
•Use 952-2PK Gas Springs
for models 69, 79
•Ball Studs for Gas Springs
are sold separately as
921-4PK
POWER PASS
Grommet
70030-1PK
™
•Protects electrical cords
from raw metal edges
For model specific Replacement Parts, manuals, and instructions, visit our website at www.knaack.com.
23
IN
G FIF
T
Y
EA
RS
CELEB
A
T
Y
R
Distributed by:
NOTICE
ANY MODIFICATION OR UNINTENDED USE OF THESE PRODUCTS SHALL
IMMEDIATELY VOID ALL MANUFACTURERS WARRANTIES. MANUFACTURER
DISCLAIMS ALL LIABILITY FOR INJURIES TO PERSONS OR PROPERTY RESULTING
FROM ANY MODIFICATION TO, OR UNINTENDED USE OF THESE PRODUCTS.
Designs are subject to change without notice. KNAACK, STORAGEMASTER, JOBMASTER, MONSTER
BOX, POWER PASS, WATCHMAN, WEATHER GUARD, WAR WAGON, and the TAN COLOR used for KNAACK
Products are all registered U.S. trademarks of Knaack LLC. KNAACK, STORAGEMASTER, MONSTER
BOX, POWER PASS, WEATHER GUARD, WATCHMAN, and JOBMASTER are all registered trademarks of
Knaack LLC in Canada. KNAACK, STORAGEMASTER, WEATHER GUARD, and WATCHMAN are registered
trademarks of Knaack LLC in the U.K. KNAACK and WATCHMAN are registered trademarks of Knaack
LLC in New Zealand. KNAACK and WEATHER GUARD are registered European Community Trademarks of
Knaack LLC. POWER PASS is a registered trademark of Knaack LLC in Mexico. The WernerCo Logo is a
trademark and a service mark of WernerCo.
For more information:
US – visit www.knaack.com or call 800.456.7865
CANADA – visit www.knaack.ca or call 888.562.2251
© 2012 Knaack, LLC. All rights reserved. The WernerCo logo is a trademark and service mark of Werner Co.
PART NO. 78-1010, REV. 5/12 PRINTED IN U.S.A

WORKS HARD. WORKS SMART.

Transcription

Similar documents

classic service van for ford transit

View Catalog - Western Truck Equipment

secure jobsite storage

RIDGID® KNAACK® Storage Systems

GRUE TOUT-TERRAIN DE 1500 TONNES PRÈS DE LA CHUTE

PadPak Jr.

- Gryfair.cz

19 FT Center Console Boat Comparison | Yamaha Boats

PadPak AutoPad Senior

furniture and audio product showcase - AV-Shop