Owners Manual - Oneida Eagle Bows

ONEIDA EAGLE BOWS WARRANTY
IMPORTANT!
Strike from above
with the
smooth-drawing,
THE SERIAL NUMBER IS LOCATED ON THE LABEL ON THE POWER LIMB AND
ALSOnatural-pointing
ENGRAVED ON THE RISER UNDER THE HAND GRIP.
precision
and
power
ONEIDA
EAGLE BOWS LIMITED
LIFETIME
WARRANTY
Warranty repairs are our top priority. Each bow has a unique serial number which will be required along with
of owner’s
an Oneida
Eagle
the original
first and last name
to obtain warranty service. Should you ever need repairs, consult
your nearest Authorized Oneida Eagle Bows Dealer. They are very knowledgeable about our bows and will
Osprey Bow.
walk you through your repair process, if necessary, contacting Oneida Eagle Bows for assistance on your
WARRANTY REGISTRATION – TO ACTIVATE YOUR BOW WARRANTY, BOW
REGISTRATION MUST BE RECEIVED WITHIN 30 DAYS OF PURCHASE. REGISTER
YOUR BOW ONLINE AT www.oneidaeaglebows.com
behalf. Please note: Authorized Oneida Eagle Bows Dealers may charge for service work that accompanies
warranty fulfillment. All Oneida Eagle Bows must be registered through the Oneida Eagle Bows Warranty
Registration to activate all warranties. Oneida Eagle Bows cannot be held responsible for injury or product
failure resulting from improper use or neglect of maintenance. Always wear safety glasses when shooting a
bow. Oneida Eagle Bows recommends all bows undergo string and cable changes every 5000 shots or every
Oneida’s
legendary
manufacturing
experience
havecoverage.
been improved
upon
12 months,
whichever
first designs
occurs, toand
maintain
Oneida Eagle
Bows warranty
Total arrow
weight
mustinbe2016
in accordance
with the guidelines
published by the
Archery
Trade Association
(ATA) for minimum
to bring archers
the best lever-action
bows
out there.
This high-performance
arrowlever-action
weight/bow bow
peak gives
weight.archers
Overstressing
Oneida
Eagle
Bows by usingand
arrows
than ATA guideline
a unique
blend
of performance
feellighter
for the
will void
our warranty
and may
cause damage to the bow or injury to the shooter. Oneida Eagle Bows
ultimate
bowfishing
experience.
specifications on strings must be adhered to.
Serious bow fishermen know there is simply no better bow than the Osprey. The
LIMITED LIFETIME WARRANTY
unique design offers a silky smooth, constant draw and feel of a recurve, making it a
Your Oneida Eagle Bow is warranted against defects in materials and workmanship to the original, registered
great bow for a night full of snapshots. A precision cam and lever system provides the
owner when purchased at an authorized dealer, for the life of the original owner. This includes all bow parts
power,
delivering
bowfishing
arrows
with a compound-like
force. Whether
except
the string,
cables,heavy
modules,
and cosmetic
appearance
(chips, dings, scratches)
caused byyou
normal use
are
snapshooting
rolling
gar
or
zeroing
in
on
big
fish,
be
ready
to
strike
with
and wear. Oneida’s sole and exclusive responsibility and your exclusive remedy is limited toanOneida or its
Osprey.
Oneida
Eagleorbows
areis built
100% replacing
in America
by bow fishermen,
for bow
authorized
dealer
repairing,
if repair
impractical,
or providing
credit. ALL Oneida
Eagle Bow
fishermen
Accessories
haveand
a 1 women.
year warranty for defects in materials and workmanship.
LIMITATION
OF LIABILITY
Congratulations
and welcome to the family! As an owner of an Oneida Eagle Osprey
SEINEBow,
OUTDOOR
HOLDINGS,
LLC. dba/ONEIDA
EAGLE
(“ONEIDA”)
SHALLwho
NOT enjoys
BE LIABLE FOR ANY
you are
now a member
of a proud
andBOWS
growing
brotherhood
SPECIAL,
INCIDENTIAL,
PUNITIVE
OR CONSEQUENTIAL
THAT RESULT
FROMtoday.
THE PURCHASE,
shooting
one of the
smoothest
performance DAMAGES
bows available
to archers
PERFORMANCE, USE, REPAIR OR REPLACEMENT OF THE PRODUCTS, INCLUDING, BUT NOT LIMITED TO, LOSS
OF ANY ANTICIPATED OR ACTUAL REVENUE OR PROFITS, INTERRUPTION OF BUSINESS OR HUNTING, LOSS OF
Oneida Eagle builds its bows to provide (with proper care and maintenance) years of
USE, OR DAMAGE TO OTHER PROPERTY OR EQUIPMENT OR DAMAGE TO REPUTATION. ALL WARRANTIES ARE
enjoyable, accurate shooting, and dependable service. Please read this entire manual
VOID REGARDING ANY PRODUCT THAT HAS BEEN ALTERED IN ANY MANNER BY ANYONE OTHER THAN
carefully
you shoot
your
bow.
provides
step-by-step
instruction
on
ONEIDA
OR ITSbefore
AUTHORIZED
DEALER
NOR
WILLThis
ANYmanual
WARRANTY
BE EFFECTIVE
IF THE BOW
HAS BEEN
how
to
properly
set
up
and
adjust
your
new
bow
to
obtain
and
maintain
maximum
SUBJECTED TO IMPROPER HANDLING OR ASSEMBLY, OPERATION, MAINTENANCE, REPAIR, ALTERATION,
performance.
MISUSE
OR NEGLIGENCE. SELLER MAKES NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, WHETHER
FOR MERCHANTIBILIITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE.
Note: Oneida Eagle Bows reserves the right to make substitutions on warranty coverage
—Johnrepair
Paul or
Morris
replacement for any reason, including but not limited to available parts or custom color/camo pattern.
8
TABLE OF CONTENTS
Welcome to Oneida Eagle Osprey Bows
General Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Bow Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting to Know Your Oneida Eagle Osprey Bow
Bow Parts Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Up Your Bow
Measure Your Draw Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Osprey Chart
Short LF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Short . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medium LF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Module System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draw Weight Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Measuring and Adjusting Tiller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brace Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limb Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Simple Maintenance Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bow String Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty
Oneida Eagle Bows Limited Lifetime Warranty. . . . . . . . . . . . . . . . . . . . .
Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitation Of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
4
4
4
4
5
5
6
6
6
7
7
7
8
8
8
IMPORTANT – KEEP THIS BOOKLET. CAREFULLY READ ALL INSTRUCTIONS IN THIS
MANUAL BEFORE USING YOUR NEW ONEIDA EAGLE BOW.
RECORD FOR FUTURE REFERENCE
Thank you for buying a top quality Oneida Eagle Osprey Bow. Here at Oneida Eagle Bows, we
combine innovative technology with quality materials to offer high-performance bows you can be
proud to own. Made with pride using American-made parts and materials, your Oneida bow is
built to provide years of enjoyment and dependable service with proper care and maintenance.
Oneida Bow Item #
Serial Number
Draw Length
Draw Weight
1
String
Color
MeasuringOPERATING
and Adjusting
Tiller
GENERAL
INSTRUCTIONS
Correct
tiller
is
achieved
when
the distance
between
the string
and thetonose
of that
the cam
is good
equal
• Always inspect your bow thoroughly
before
each shooting
session
insure
it is in
on both top
andCheck
bottomforcams
of loose,
the bow.
Measurecomponents
the tiller at the
the cam
as shown
working
order.
worn,
or missing
andnose
haveofthem
replaced
at anin
Fig. 6. If theONEIDA
measurements
from one
endscrews,
versesmodules,
the other,cables,
you have
authorized
dealer asdiffer
required,
ie. set
etc.two options for
matching
them:
• Inspect your arrows to insure that they are straight, undamaged and that each nock is in good
A. You can Amove
the cam
the fired
stringfrom
on the
measuring
sidebow
(increasing
draw
condition.
cracked
nocknose
can closer
break to
when
thelonger
bow and
cause the
to “dry fire”
weightinslightly).
movetothe
noseand
closer
to thetostring,
carefully
turn the
(draw) weight
resulting
possibleToinjury
thecam
archer
damage
the bow.
Dry-firing
is drawing
and bolt
clockwise
watching
thean
cam
noseonmovement.
releasing
the while
bowstring
without
arrow
the string.
You can
move thearrows
cam nose
further
from
the string
on the shorter
reducing
the
•B.When
purchasing
for your
bow,
consult
the selection
chart side
from(slightly
the arrow
manufacturer
weight).
To move
thefor
cam
nose
away fromAlways
the string,
the (draw)
weight the
boltATA
countanddraw
select
the correct
arrow
your
application.
use turn
an arrow
that follows
er-clockwise.
guidelines.
Failure to do so could cause personal injury and damage to your bow.
Once your adjustment is made, re-tighten the Orange Timing Screw.
BOW MAINTENANCE
Height bow will give you many years of use if maintained and cared for properly. It is a
•Brace
Your ONEIDA
mechanical
that is from
subject
wearofand
inspected
periodically
Brace heightdevice
is measured
thetoback
the therefore
grip to themust
stringbe(Fig.
7). Consult
the chartand
for given
the
the
proper
adjustments
and service. It is recommended that this service be performed at least
brace
height
on your set-up.
once a year by an authorized ONEIDA dealer. All components, including string, cables, fastener,
modules, e-clips, limbs and riser should be carefully inspected for damage or wear.
• Strings and Cables: Apply a light coat of high quality bowstring wax to your string each time
you shoot your bow to reduce wear on your string. It is especially important not to wax the bow
string loops that wrap around the outboard limb tip.
• Strings and cables must be replaced periodically. A worn cable or sting can suddenly break
causing serious injury to the archer and damage to the bow. It is recommended that the string
and cables be replaced at least every 5,000 shots or 12 months. ONEIDA recommends that this
work be performed by an authorized ONEIDA dealer.
• Always store your bow in a cool dry place. High temperatures, such as those that can occur in
the interior of a vehicle, can cause
Fig. 6serious damage to your bow.
Fig. 7
• After use in high humidity or damp conditions, wipe the metal components of your bow with a light oil.
Cable Maintenance
SAFETY
There
three
types safe
of cable
on yourofOneida
Osprey bow:
As
withare
any
weapon,
operations
your ONEIDA
bow must always be the highest priority.
ALWAYS WEAR SAFETY GLASSES WHEN HANDLING A BOW.
2- Power
Cablesto use your bow without proper instruction. Doing so can result in serious injury.
Do
not attempt
2- Yoke Cables
a. NEVER DRY-FIRE YOUR BOW. Dry-firing is drawing and releasing the bowstring without an
1- Timing
Cable
arrow
on the
string. Dry-firing will likely cause damage to the bow and serious injury to the archer.
b. Always be sure of your intended target, as well as what lies behind the target area. An arrow
The Power and Yoke cables on your high-performance bow should be inspected annually for wear
can travel a considerable distance, so it is important to have a safe and sound backstop.
and replaced by the Dealer as needed. Lighter arrows and a higher draw weight may require more
c.
If you replacement.
draw a bow and
need to letisitrequired
down, doif any
so infraying
a slowisand
careful
manner.
Keep your
frequent
Replacement
evident.
Failure
to replace
these
support arm straight and prepare for a rapid and violent let-down. Avoid hitting your hand on
cables before they break could result in damage to your bow, and void the warranty coverage.
protruding accessories such as the cable guard or quiver. Keep your head and face back and out
of
danger
during let-down. Never
draw
a bow with a peak
weight
above yourYoke
comfort
Item
#
Brace
Height
Power
Cable
Cablelevel.
Always use a wrist sling when drawing a bow.
20001 Short LF-XX
6-1/8"–6-3/8"
Blue/Blue
Purple/Orange
d. Never modify any part of the bow or its components by drilling extra holes or removing
20002 Short-XX
6-5/and
8”–7-1/8"
Blue/Blue
Purple/White
material.
This voids the warranty
presents safety problems.
20003 Medium LF-XX
6-1/4"–6-1/2"
Blue/White
Red/Yellow
20004 Medium-XX
6-3/8"–6-5/8"
Blue/White
Red/Red
“XX” represents the riser color/camo finish
62
GETTING
TO KNOW YOUR ONEIDA EAGLE OSPREY BOW
Limb
Alignment
The limb configuration of an Oneida bow is unique. A power limb extends from the riser, and
This list oftoindividually
numbered
partswith
will ahelp
youThe
withbutt
theend
set-up
andoutboard
care instructions
found
connects
the outboard
recurve limb
hinge.
of the
limb overlaps
laterpower
in thislimb
manual.
You inches
may find
it helpful
to refer
backend
to this
graphic
as alimb
reference.
the
for a few
past
the hinge.
The butt
of the
outboard
must always be
aligned parallel to the power limb. (Fig. 8)
7
Under normal conditions, outboard limbs will remain
properly aligned indefinitely. Occasionally
these limbs lose alignment through a rough bump from a minor mishap.
An outboard recurve limb that appears warped rarely has any permanent damage. Usually issues
with limb alignment are a result of either of the following situations:
A. The outboard recurve limb butt section is not sitting parallel with the power limb.
8 an imbalance in the yoke cable tension,
B. A yoke cable has shifted laterally in the saddle to create
pulling 1the limb out of alignment.
9
Contact your dealer or Oneida Eagle tech support. ([email protected])
10
Simple Maintenance Indicators
2
11
BOW NOISE CAN RESULT FROM:
3 Oneout
A. Brace height
of recommended range
per side
B. Hinge needs oiling
C. Saddle screw not tight (clicking noise)
D. Loose timing system
4
12
ERRATIC ARROW FLIGHT CAN RESULT FROM:
A. Improper arrow size
B. Loose timing system
C. Tiller out of adjustment
D. Improper tuning of bow and arrow combination
13
14
Fig. 8
Bow String
5 Replacement
Before each shooting session, the bow’s string should
Fig. 9
be visually checked for frayed or broken strands, or
3
worn serving. One per side
To change a string:
15
A. Draw the6bow and place it between the two limb
compression blocks on an Oneida Compression
16
Jig. (Fig. 9) Item # 20017
B. Remove the old string and replace it with a new
one of the same size.
C. Draw the bow and remove it from the jig.
D. Install a new nocking point.
3
7
1 Hinge
2 Orange Timing Screw and
Timing Assembly
Tensioning Hub
3 Cam
4 Bowstring
5 Timing Cable
6 Power Cable
7 Outboard Limbs
8 Saddle
9 Power Limb
10 Weight Bolt
11 End Cap
12 Idler Wheel
13 Riser
14 Grip
15 Dampening System
16 Yoke Cable
SETTING UP YOUR BOW
WARNING! DO NOT PUT YOUR ONEIDA BOW IN A BOW PRESS. DOING SO WILL DAMAGE
YOUR BOW.
Measure Your Draw Length
The associate at your local Oneida Dealer can help you with this. Or you can do it yourself, while
pointing your bow in a safe direction (downrange) with a secure backstop. Place a full length
arrow on your bow, drawing with fingers or the release you’ll be using, according to your shooting
style. Draw to your anchor point. Mark the arrow shaft even with the front of the riser. Slowly let
down your draw, and remove the arrow. Measure the length from the arrow nock, to the mark on
your arrow shaft. This is your draw length, and will help you select your bow set-up from the
Osprey chart.
OSPREY CHART
Item #
Draw Length
Module
% Let-Off
String
20001-XX: Short Cams with short limb
25.5"–28"
27"–28"
F
15
80
65
43"
20002-XX: Short Cams with medium limb
26.5"–29"
28"–29"
F
15
80
65
43-3/4"
20003-XX: Medium Cams with short limb
26.5"–29"
28"–29"
F
15
80
65
43"
20004-XX: Medium Cams with medium limb 28.5"–31"
30"–31"
F
15
80
65
44-1/2"
“XX” represents the riser color/camo finish
Note: If you decide to use a shorter arrow because your arrow rest is mounted behind the riser,
use that shorter length when consulting an arrow selection chart.
Module System
Your Oneida Osprey bow comes with #15 Modules factory
installed, along with a set of #F Modules included in the box,
to help you utilize draw weight range, and let-off settings.
(See Fig. 1) Your bow allows up to 3” of draw length adjustment, and falls into one of the 4 set-up configurations listed
in the chart above. The Yoke Cable column in the chart on
page 6 will help you identify which set-up configuration you
are looking at.
4
Modules
15 (4)
F (4)
Fig. 1
Changing Modules
To change to the #F Modules (or back again), follow these steps:
A. Verify that you have all 4 Modules (one for each cam), and that they are the same shape.
B. Due to molding flash, sometimes the flat side of the modules may need to be touched up with
fine sandpaper, to achieve a smooth fit into the cam. This is best done by laying a sheet of very
fine sandpaper, or a single cut flat file flat on a bench, and moving the flat surface of the
module around to remove burrs. Only a brief touch up will do the trick. (Fig. 2)
C. Loosen the Cam Set Screw as in Fig. 3, and remove the Module by pulling the rear cable back
slightly, dislodging the Module gently with a pencil, and sliding it out. See arrow in Fig. 3. (A)
D. Install the new Module with the grooved side facing toward the cable. Push it in gently but
firmly until it matches up to the cable grooves on the cam. Tighten the set screw snugly, but DO
NOT OVER-TIGHTEN.
Modules in Cam
(Grooved Side Showing)
F
Cam
Set Screw
Cam
A
Rear Cable
Fig. 3
Fig. 2
15
Fig. 4
Draw Weight Adjustment
The draw weight range on your Osprey bow is 30-50lbs. Oneida bows ship with the draw weight
set in the middle of the draw weight range. Before changing the draw weight, draw the bow. It
may be set just right for you. If not, adjust as follows (See Fig. 5):
WARNING! DO NOT ADJUST THE WEIGHT BOLTS UNTIL YOU LOOSEN THE ORANGE TIMING
SCREW. DOING SO CAN CAUSE DAMAGE, AND OTHERWISE PUT STRESS ON VARIOUS
POINTS OF THE TIMING AND POWER TRANSFER SYSTEMS.
A. Loosen the orange timing screw.
B. The draw weight can be adjusted using the 2 Weight (adjustment) Bolts. Use a 3/16” Allen wrench for this procedure. Each
bolt has to be adjusted exactly the same amount as the
other. It is important to alternate between each bolt,
adjusting only a ¼ of a turn in the same direction each time.
• Turning the bolts clockwise ___ increases the draw weight.
• Turning the bolts counter-clockwise ___ decreases the draw
weight. After adjusting the draw weight, you should check
your tiller before tightening the Orange Timing Screw.
B
A
Loosen timing screw
5
Fig. 5
GENERAL
INSTRUCTIONS
MeasuringOPERATING
and Adjusting
Tiller
is achieved
when
the distance
between
the string
and thetonose
of that
the cam
is good
equal
•Correct
Alwaystiller
inspect
your bow
thoroughly
before
each shooting
session
insure
it is in
on both top
andCheck
bottomforcams
of loose,
the bow.
Measurecomponents
the tiller at the
the cam
as shown
working
order.
worn,
or missing
andnose
haveofthem
replaced
at anin
authorized
dealer asdiffer
required,
ie. set
etc.two options for
Fig. 6. If theONEIDA
measurements
from one
endscrews,
versesmodules,
the other,cables,
you have
them:arrows to insure that they are straight, undamaged and that each nock is in good
•matching
Inspect your
A. You can Amove
the cam
the fired
stringfrom
on the
measuring
sidebow
(increasing
draw
condition.
cracked
nocknose
can closer
break to
when
thelonger
bow and
cause the
to “dry fire”
resulting
possibleToinjury
thecam
archer
damage
the bow.
Dry-firing
is drawing
and bolt
weightinslightly).
movetothe
noseand
closer
to thetostring,
carefully
turn the
(draw) weight
releasing
the while
bowstring
without
arrow
the string.
clockwise
watching
thean
cam
noseonmovement.
You can
move thearrows
cam nose
further
from
the string
on the shorter
reducing
the
•B.When
purchasing
for your
bow,
consult
the selection
chart side
from(slightly
the arrow
manufacturer
anddraw
select
the correct
arrow
your
application.
use turn
an arrow
that follows
weight).
To move
thefor
cam
nose
away fromAlways
the string,
the (draw)
weight the
boltATA
countguidelines.
Failure to do so could cause personal injury and damage to your bow.
er-clockwise.
Once your adjustment is made, re-tighten the Orange Timing Screw.
BOW MAINTENANCE
•Brace
Your ONEIDA
Height bow will give you many years of use if maintained and cared for properly. It is a
mechanical
that is from
subject
wearofand
inspected
periodically
Brace heightdevice
is measured
thetoback
the therefore
grip to themust
stringbe(Fig.
7). Consult
the chartand
for given
the
the
proper
adjustments
and
service.
It
is
recommended
that
this
service
be
performed
at
least
brace height on your set-up.
once a year by an authorized ONEIDA dealer. All components, including string, cables, fastener,
modules, e-clips, limbs and riser should be carefully inspected for damage or wear.
• Strings and Cables: Apply a light coat of high quality bowstring wax to your string each time
you shoot your bow to reduce wear on your string. It is especially important not to wax the bow
string loops that wrap around the outboard limb tip.
• Strings and cables must be replaced periodically. A worn cable or sting can suddenly break
causing serious injury to the archer and damage to the bow. It is recommended that the string
and cables be replaced at least every 5,000 shots or 12 months. ONEIDA recommends that this
work be performed by an authorized ONEIDA dealer.
• Always store your bow in a cool dry place. High temperatures, such as those that can occur in
the interior of a vehicle, can cause serious damage to your bow.
Fig. 6
Fig. 7
• After use in high humidity or damp conditions, wipe the metal components of your bow with a light oil.
SAFETY
Cable Maintenance
There
three
types safe
of cable
on yourofOneida
Osprey bow:
As
withare
any
weapon,
operations
your ONEIDA
bow must always be the highest priority.
ALWAYS WEAR SAFETY GLASSES WHEN HANDLING A BOW.
2- Power
Cablesto use your bow without proper instruction. Doing so can result in serious injury.
Do
not attempt
2Yoke
Cables
a. NEVER DRY-FIRE YOUR BOW. Dry-firing is drawing and releasing the bowstring without an
1- Timing
Cable
arrow
on the
string. Dry-firing will likely cause damage to the bow and serious injury to the archer.
b. Always be sure of your intended target, as well as what lies behind the target area. An arrow
The travel
Poweraand
Yoke cablesdistance,
on your so
high-performance
should
inspected
annually for wear
can
considerable
it is important tobow
have
a safebeand
sound backstop.
and replaced by the Dealer as needed. Lighter arrows and a higher draw weight may require more
c. If you draw a bow and need to let it down, do so in a slow and careful manner. Keep your
frequentarm
replacement.
Replacement
if any
fraying
is evident.
Failure
replace
these
support
straight and
prepare forisarequired
rapid and
violent
let-down.
Avoid
hittingtoyour
hand
on
cables
before
they
break
could
result
in
damage
to
your
bow,
and
void
the
warranty
coverage.
protruding accessories such as the cable guard or quiver. Keep your head and face back and out
of danger during let-down. Never draw a bow with a peak weight above your comfort level.
Item #
Brace Height
Power Cable
Yoke Cable
Always use a wrist sling when drawing a bow.
20001 Short LF-XX
6-1/8"–6-3/8"
Blue/Blue
d. Never modify any part of the bow or its components by drilling extra holesPurple/Orange
or removing
20002 Short-XX
6-5/and
8”–7-1/8"
Blue/Blue
Purple/White
material.
This voids the warranty
presents safety problems.
20003 Medium LF-XX
6-1/4"–6-1/2"
Blue/White
Red/Yellow
20004 Medium-XX
6-3/8"–6-5/8"
Blue/White
Red/Red
“XX” represents the riser color/camo finish
62
Limb
Alignment
GETTING
TO KNOW YOUR ONEIDA EAGLE OSPREY BOW
The limb configuration of an Oneida bow is unique. A power limb extends from the riser, and
connects
the outboard
recurve limb
hinge.
of the
limb overlaps
This list oftoindividually
numbered
partswith
will ahelp
youThe
withbutt
theend
set-up
andoutboard
care instructions
found
the
power
limb
for
a
few
inches
past
the
hinge.
The
butt
end
of
the
outboard
limb
must
later in this manual. You may find it helpful to refer back to this graphic as a reference.always be
aligned parallel to the power limb. (Fig. 8)
7
Under normal conditions, outboard limbs will remain
properly aligned indefinitely. Occasionally
these limbs lose alignment through a rough bump from a minor mishap.
An outboard recurve limb that appears warped rarely has any permanent damage. Usually issues
with limb alignment are a result of either of the following situations:
A. The outboard recurve limb butt section is not sitting parallel with the power limb.
8 an imbalance in the yoke cable tension,
B. A yoke cable has shifted laterally in the saddle to create
pulling the limb out of alignment.
1
9
Contact your dealer or Oneida Eagle tech support. ([email protected])
10
Simple Maintenance Indicators
2
11
BOW NOISE CAN RESULT FROM:
3 Oneout
A. Brace height
of recommended range
per side
B. Hinge needs oiling
C. Saddle screw not tight (clicking noise)
D. Loose timing system
4
12
ERRATIC ARROW FLIGHT CAN RESULT FROM:
A. Improper arrow size
B. Loose timing system
C. Tiller out of adjustment
D. Improper tuning of bow and arrow combination
13
14
Fig. 8
Bow String
5 Replacement
Before each shooting session, the bow’s string should
Fig. 9
be visually checked for frayed or broken strands, or
3 One per side
worn serving.
To change a string:
15
A. Draw the6bow and place it between the two limb
compression blocks on an Oneida Compression
Jig. (Fig. 9) Item # 20017
16
B. Remove the old string and replace it with a new
one of the same size.
C. Draw the bow and remove it from the jig.
D. Install a new nocking point.
7
3
1 Hinge
2 Orange Timing Screw and
Timing Assembly
Tensioning Hub
3 Cam
4 Bowstring
5 Timing Cable
6 Power Cable
7 Outboard Limbs
8 Saddle
9 Power Limb
10 Weight Bolt
11 End Cap
12 Idler Wheel
13 Riser
14 Grip
15 Dampening System
16 Yoke Cable
ONEIDA EAGLE BOWS WARRANTY
IMPORTANT!
Strike from above
with the
smooth-drawing,
THE SERIAL NUMBER IS LOCATED ON THE LABEL ON THE POWER LIMB AND
ALSO natural-pointing
ENGRAVED ON THE RISER UNDER THE HAND GRIP.
and
power
ONEIDAprecision
EAGLE BOWS LIMITED
LIFETIME
WARRANTY
Warranty repairs are our top priority. Each bow has a unique serial number which will be required along with
ofowner’s
an first
Oneida
the original
and last nameEagle
to obtain warranty service. Should you ever need repairs, consult
your nearest Authorized Oneida Eagle Bows Dealer. They are very knowledgeable about our bows and will
Osprey Bow.
walk you through your repair process, if necessary, contacting Oneida Eagle Bows for assistance on your
WARRANTY REGISTRATION – TO ACTIVATE YOUR BOW WARRANTY, BOW
REGISTRATION MUST BE RECEIVED WITHIN 30 DAYS OF PURCHASE. REGISTER
YOUR BOW ONLINE AT www.oneidaeaglebows.com
behalf. Please note: Authorized Oneida Eagle Bows Dealers may charge for service work that accompanies
warranty fulfillment. All Oneida Eagle Bows must be registered through the Oneida Eagle Bows Warranty
Registration to activate all warranties. Oneida Eagle Bows cannot be held responsible for injury or product
failure resulting from improper use or neglect of maintenance. Always wear safety glasses when shooting a
bow. Oneida Eagle Bows recommends all bows undergo string and cable changes every 5000 shots or every
Oneida’s
legendary
designs
manufacturing
have
been improved
upon
12 months,
whichever
first occurs,
to and
maintain
Oneida Eagleexperience
Bows warranty
coverage.
Total arrow
weight
must be
in accordance
the guidelines
by the
Archery
(ATA) for minimum
in 2016
to bringwith
archers
the bestpublished
lever-action
bows
out Trade
there.Association
This high-performance
arrowlever-action
weight/bow peak
Overstressing
Oneida
Eagle
by using arrows
lighter
than ATA guideline
bowweight.
gives archers
a unique
blend
of Bows
performance
and feel
for the
will void
our warranty
and may
cause damage to the bow or injury to the shooter. Oneida Eagle Bows
ultimate
bowfishing
experience.
specifications on strings must be adhered to.
Serious bow fishermen know there is simply no better bow than the Osprey. The
LIMITED LIFETIME WARRANTY
unique design offers a silky smooth, constant draw and feel of a recurve, making it a
Your Oneida Eagle Bow is warranted against defects in materials and workmanship to the original, registered
great bow for a night full of snapshots. A precision cam and lever system provides the
owner when purchased at an authorized dealer, for the life of the original owner. This includes all bow parts
delivering
heavy bowfishing
arrows
with a (chips,
compound-like
force. caused
Whether
exceptpower,
the string,
cables, modules,
and cosmetic
appearance
dings, scratches)
by you
normal use
are
snapshooting
rolling
gar
or
zeroing
in
on
big
fish,
be
ready
to
strike
with
an
and wear. Oneida’s sole and exclusive responsibility and your exclusive remedy is limited to Oneida or its
Osprey.
Oneida
Eagle
built 100%replacing
in America
by bowcredit.
fishermen,
for bow
authorized
dealer
repairing,
or ifbows
repairare
is impractical,
or providing
ALL Oneida
Eagle Bow
fishermen
women.
Accessories
have and
a 1 year
warranty for defects in materials and workmanship.
LIMITATION
OF LIABILITY
Congratulations
and welcome to the family! As an owner of an Oneida Eagle Osprey
SEINEBow,
OUTDOOR
HOLDINGS,
LLC. dba/ONEIDA
EAGLE
(“ONEIDA”)
SHALL NOT
LIABLE FOR ANY
you are
now a member
of a proud
andBOWS
growing
brotherhood
whoBE
enjoys
SPECIAL,
INCIDENTIAL,
OR CONSEQUENTIAL
THAT RESULT
FROMtoday.
THE PURCHASE,
shooting
one of PUNITIVE
the smoothest
performanceDAMAGES
bows available
to archers
PERFORMANCE, USE, REPAIR OR REPLACEMENT OF THE PRODUCTS, INCLUDING, BUT NOT LIMITED TO, LOSS
OF ANY ANTICIPATED OR ACTUAL REVENUE OR PROFITS, INTERRUPTION OF BUSINESS OR HUNTING, LOSS OF
Oneida Eagle builds its bows to provide (with proper care and maintenance) years of
USE, OR DAMAGE TO OTHER PROPERTY OR EQUIPMENT OR DAMAGE TO REPUTATION. ALL WARRANTIES ARE
enjoyable, accurate shooting, and dependable service. Please read this entire manual
VOID REGARDING ANY PRODUCT THAT HAS BEEN ALTERED IN ANY MANNER BY ANYONE OTHER THAN
carefully
before you shoot
your
manual provides
step-by-step
instruction
on
ONEIDA
OR ITS AUTHORIZED
DEALER
NORbow.
WILL This
ANY WARRANTY
BE EFFECTIVE
IF THE BOW
HAS BEEN
how
to
properly
set
up
and
adjust
your
new
bow
to
obtain
and
maintain
maximum
SUBJECTED TO IMPROPER HANDLING OR ASSEMBLY, OPERATION, MAINTENANCE, REPAIR, ALTERATION,
performance.
MISUSE
OR NEGLIGENCE. SELLER MAKES NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, WHETHER
FOR MERCHANTIBILIITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE.
Note: Oneida Eagle Bows reserves the right to make substitutions on warranty coverage
—Johnrepair
PaulorMorris
replacement for any reason, including but not limited to available parts or custom color/camo pattern.
8
KESTREL
TABLE OF CONTENTS
Welcome to Oneida Eagle Osprey Bows
General Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bow Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety . . . . . . . . . . . The
. . .silent,
. . . hard-hitting
. . . . . . .Kestrel
. . . .gives
. . . hunters
. . . . . . . . . . . . .
the power and impact energy of a compound
Getting to Know Your Oneida Eagle
Bowbig game, with the silky
bow toOsprey
take down
Bow Parts Diagram . . . . smooth,
. . . . .constant
. . . . .draw
. . . and
. . feel
. . .of. a. . . . . . . . . . . . . .
traditional recurve. Powered by Oneida
Setting Up Your Bow
Eagle’s precision cam and lever system, this
Measure Your Draw Length bow
. . .delivers
. . . . when
. . . .that
. . monster
. . . . . buck
. . . walks
. . . . . . . . . . . .
Osprey Chart
into shooting range. Giving hardcore
Short LF . . . . . . . . bowhunters
. . . . . . . a. unique
. . . . combination
. . . . . . . of. . . . . . . . . . . . . .
Short . . . . . . . . . precision
. . . . . and
. . .performance
. . . . . . . in. the
. . field,
. . . the
. . . . . . . . . . . .
Medium LF . . . . . . smooth
. . . . .shooting,
. . . . .natural-pointing
. . . . . . . . .Kestrel
. . . . . . . . . . . . . .
Medium . . . . . . . . delivers
. . . . .a .high-performance
. . . . . . . . . .bowhunting
. . . . . . . . . . . . . . . . .
Module System . . . . . . experience
. . . . . . like
. . .no. other.
. . . . . . . . . . . . . . . . . . . . . . .
Changing Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draw Weight Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Measuring and Adjusting Tiller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brace Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limb Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Simple Maintenance Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standout
among
Bow String
Replacement
. . .your
. . . bow
. . . .fishing
. . . . .buddies
. . . . . .by
. .wearing
. . . . . . . . . . .
Warranty
Oneida Eagle Bows Shirts, Hats, and Hoodies.
Oneida
Eagle
Limited
Lifetime
. . . . . . . . . . . . . . . . . . . .
Shop
atBows
ONEIDA
GEAR
onWarranty.
www.oneidaeaglebows.com
Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitation Of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
2
3
4
4
4
4
4
4
5
5
6
6
6
7
7
7
ONEIDA EAGLE BOWS GEAR
8
8
8
IMPORTANT – KEEP THIS BOOKLET. CAREFULLY READ ALL INSTRUCTIONS IN THIS
MANUAL BEFORE USING YOUR NEW ONEIDA EAGLE BOW.
RECORD FOR FUTURE REFERENCE
Thank you for buying a top quality Oneida Eagle Osprey Bow. Here at Oneida Eagle Bows, we
combine innovative technology with quality materials to offer high-performance bows you can be
proud to own. Made with pride using American-made parts and materials, your Oneida bow is
built to provide years of enjoyment and dependable service with proper care and maintenance.
Oneida Bow Item #
Serial
Number
Share your
Oneida
Bow Fishing Action
Draw
Length
Draw Weight
Stringand You Tube
Color
Check
us out on our website, www.oneidaeglebows.com,
Facebook,
for additional
information, and a link to share your bowfishing wins with an Oneida Eagle Osprey Bow.
1
“Whether it’s Giant Alligator Gar here on the Trinity River or
monster Red Fish in the bayous, I need the best bowfishing
gear on my boat. That means I’m ALL-IN with the legendary
bows from Oneida Eagle.”
—Brian “Pigman” Quaca
“Whether fishing around the world or in big tournaments over
the past 12 years, I have yet to find a better shooting bow
than the Oneida Osprey. You won’t find another bow in my
hand or on my boat.”
—John Paul Morris
“The #1 choice for serious bow fishermen, Oneida Eagle
Bows have won more Bowfishing World Championships than
all others combined. Combining the smooth draw of a recurve
with the power of a compound, these bows deliver every
time.”
—Chuck Belmore
“A serious bow for serious bow fishermen, Oneida Eagle bows
are the smoothest-drawing, hardest-hitting bows on the
market. They are the best bows for bowfishing, handsdown!”
—Jon Justice
2726 East Jean Street
Springfield, MO 65803
(888)-437-4218
www.OneidaEagleBows.com