trash pumps - Equipment Synergy International

Transcription

Equipment Synergy International
TRASH PUMPS
www.theESIchoice.com
TRASH PUMPS
Dependable Trash Pumps you can count on in the toughest applications with flow
efficiency and solids handling capability. These pumps are constructed of either die
cast or sand cast housings with volute and impellers of cast iron for long life. Solid,
basic, dependable machines that will perform to your expectations. Other features
include Viton© mechanical seals and electric start/wheel kit options (depending on model).
ETP-2H
Compact & lightweight with great performance in a small package. Die
cast aluminum pump casing with cast iron volute and impeller. Dependable
Honda engine and comes standard with metal strainer and cleanout cover
tool. Silicone/Viton© mechanical seal for long-life. Use for those 1-man
trash dewatering applications. 1” spherical solids handling capability.
ETP-3H
Die cast aluminum pump casing with cast iron volute and impeller to
help resist abrasion. Dependable Honda engine and comes standard
with metal strainer and cleanout cover tool. Silicone/Viton©
mechanical seal for long-life. Use for those applications where you
need to move a little more water. 1.5” spherical solids handling
capability in an economical package.
ETP-3XH
Heavy-duty extra thick sand cast pump casing for tough condition
applications along with the standard cast iron impeller and volute.
Simple cleanout design permits easy removal of trash and debris
without disconnecting hoses. Full wraparound pump frame is standard.
TRASH PUMPS
ETP-4HE
This is a heavy-duty 4” trash pump with full 2” solids handling
capacity, use in those applications where you need a strong
dependable pump. Fully featured with electric-start standard
and 16” pneumaic tires (on steel wheels) as part of the
standard wheel kit. Extra thick sand cast pump housing and
cast iron volute and impeller for long life in abrasive pumping
applications. Also standard is an upgraded Viton©/Silicone
mechanical seal.
ETP-6DYT
When you need to move a lot of water fast and efficiently then
select ESI’s 6” Trash Pump. This model offers standard features
not found on similarly priced units:
• Stainless steel impeller (resistant to abrasion)
• Stainless steel fuel tank (no more rust problems with steel tanks and no more heat or warping problems with plastic tanks)
• Unique Slide Mechanism permits complete service of the pump housing without removal of the hoses or
lifting off of the pump casings (Patent Pending)
Dependable Yanmar water-cooler diesel engine equipped with
a digital tachometer/hourmeter and metal suction strainer. Silicone/Viton© mechanical seal for long-life. The 6DT has a full
3” spherical solids handling capability. The trailer is D.O.T. approved.
TRASH PUMPS
Suction x Discharge in. (mm)
Max Capacity GPM (l)
Max Head ft. (m)
Max Pressure psi (kPa)
Max Solids in. (mm)
Max Lift ft. (m)
ETP-2H
ETP-3H
ETP-3XH
ETP-4HE
ETP-6DS
ETP-6DYT
2x2 (51x51)
3x3 (76x76)
3x3 (76x76)
4x4 (101x101)
6X6 (152x152)
6X6 (152x152)
200 (760)
300 (1140)
340 (1292)
500 (1900)
1000 (3800)
1000 (3800)
98 (31)
105 (33)
100 (31)
100 (31)
95 (30)
95 (30)
42.4 (293)
45.5 (305)
43.3 (291)
43.3 (291)
41.1 (276)
41.1 (276)
1 (25)
1.5 (37)
1.5 (37)
2.0 (50)
3.0 (76)
3.0 (76)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
25 (7.6)
Honda GX-160
Honda GX-160
Honda GX-270
Honda GX-390
Daihatsu 3/LC
Yanmar Dsl
4.8 (3.6)
4.8 (3.6)
7.1 (5.3)
11.1 (8.3)
26.5 (19.8)
26.5 (19.8)
Operating RPM
3600
3600
3600
3600
3200
3200
Running Time Minutes (Hours)
100
100
100
80
9 (hours)
9 (hours)
Standard
Standard
Standard
Standard
Standard
Standard
Recoil
Recoil
Recoil
Electric/Recoil *
Electric *
Electric *
ESIC402-90
ESIC402-90
ESIA734-90
(10” wheels)
ESIA735-90 (16”
wheels)
standard
N/A
N/A
24.0x19.5x19.9x
(610x495x505)
24.0x19.5x19.9x
(610x495x505)
21.3x14.3x18.0
(540x360x450)
44.5x37.5x36.3
(1130x953x922)
71 x 28 x 41
(1803x711x1041)
99.0x48.0x60.0
(252x122x152)
cm
86 (39)
95 (43)
158 (72)
280 (127)
850 (386)
1125 (510)
Engine Brand and Model
Operating HP (kW)
Low Oil Shutdown
Starting Method
Optional Wheel Kit
Dimensions LxWxH in. (mm)
Dry Weight lbs. (kg)
E I
EQUIPMENT SYNERGY INTERNATIONAL
101 Gannaway Drive , Suite # 3
P.O. Box 997
Jamestown, North Carolina 27282
Phone: 866.648.7101
Fax: 336.310.1177
Email: [email protected]
www.theESIchoice.com

trash pumps - Equipment Synergy International

Transcription

Similar documents

With Pastor Benny Hinn

Schott Fostec data sheets - backlights

Auction Catalog - Provincetown Art Association and