© Webstone Company Inc 2016 Rev 5/2/2016

Transcription







A fully-fabricated solution, kits
include everything but the pump.
Available for a wide array of boilers.
 Your choice of SWT, IPS or PRESS Manifold
 Fully fabricated & insulated supply & return lines
assembled with copper or Hydro-Core Flex Tubing.
 Outfitted with connections for your specific boiler
 Integrated Mesh “Y” Strainer w/ Rotating Flange
 Plugged 1⁄2" port in strainer cap for installation of drain
valve
 Plugged 1⁄4" pressure gauge port on select kit models
 Plugged FIP ports for connection to other equipment.
i.e. indirect water heater, heat exchanger, pressure relief
valve, etc.
 Accommodates circulators measuring 6." in length
 Press connections compatible w/ popular press tools





COMPLETE KITS COMPATIBLE WITH SELECT
BOILERS FROM:*
• HEAT TRANSFER PRODUCTS
• NEW YORK THERMAL NTI
FEATURES:
• Choice of FIP, SWT or PRESS Hydro-Core Manifold
• Insulated return line assembled from one-piece,
9 3/4" length type-L bent copper tubing
• Insulated supply line assembled with
24" length Hydro-Core Flex tubing
• Integrated connections for your specific boiler
• Integrated Mesh "Y” Strainer with Rotating Flange
• Plugged 1 ⁄2" strainer cap port
• Plugged FIP ports
BOILER
Right flange manifold shown - varies by kit
All manufacturer names, models and part numbers are trademarked or registered
trademark property of their respective owners. Webstone products are not manufactured,
sponsored, authorized, or endorsed by any party unless otherwise noted.
BOILERS FROM:*
• BURNHAM • LOCHINVAR
FEATURES:
• Insulated supply & return lines assembled
from one-piece, type-L bent copper tubing
BOILER
BOILERS FROM:*
• BRADFORD WHITE • LAARS • PEERLESS • RAYPAK
• SLANT FIN • TRIANGLE TUBE • WEIL-MCLAIN
FEATURES:
4 ½” length type-L bent copper tubing
24" length Hydro-Core Flex tubing
BOILER
Left flange manifold shown - varies by kit
BOILERS FROM:*
• BAXI • DUNKIRK • HEAT TRANSFER PRODUCTS
• LOCHINVAR • NAVIEN • NEW YORK THERMAL NTI
• NORITZ • RAYPAK • SLANT FIN • SMITH
• TRIANGLE TUBE • UTICA • VIESSMANN
• WILLIAMSON-THERMOFLO
FEATURES:
BOILER
4 1/2" length type-L bent copper tubing*
24" length Hydro-Core Flex tubing**
* 6 ½ length for 4CF5-WH255 , 5CF5-WH255 and 8CF5-WH255
** 12" length for 4CF4L-WHNHB, 5CF4L-WHNHB and 8CF4L-WHNHB
BOILERS FROM:*
• LOCHINVAR
BOILER
FEATURES:
• Insulated supply & return lines assembled from
one-piece, type-L bent copper tubing
• Integrated Mesh "Y” Strainer
• Plugged 1 ⁄2” strainer cap port
BOILERS FROM:*
• BAXI • BIASI • BOSCH • DUNKRIK
• IBC TECHNOLOGIES • PEERLESS • PENSOTTI
• RAYPAK • SIME • SLANT FIN • SMITH • UTICA
BOILER
FEATURES:
• Choice of FIP, SWT or PRESS
Double Ball Drain Manifold
• Insulated supply & return lines with 12" length
Hydro-Core Flex tubing
COMPLETE KITS COMPATIBLE WITH SELECT BOILERS
FROM:*
BOILER
• BRADFORD WHITE
• TRIANGLE TUBE
FEATURES:
• Choice of FIP, SWT or PRESS Double Ball Drain Manifold
• Insulated 18" length supply & 12" length return lines
with Hydro-Core Flex tubing
COMPLETE KITS COMPATIBLE WITH SELECT BOILERS
FROM:*
• LAARS
FEATURES:
• Choice of FIP, SWT or PRESS Double Ball Drain Manifold
• Insulated 18" length supply & return lines
with Hydro-Core Flex tubing
COMPLETE KITS COMPATIBLE WITH SELECT BOILERS FROM:*
• HEAT TRANSFER PRODUCTS
• LAARS • NAVIEN
FEATURES:
• 1 1/4 x 1” Hydro-Core Double Ball Drain Manifold
• Choice of FIP, SWT or PRESS connections
• Insulated supply & return lines assembled from Hydro-Core Flex Tubing
• Integrated 1" female boiler connections
• Plugged FIP ports for connection to other devices
• 1/4" pressure gauge port
• 30 PSI pressure gauge
• 30 PSI pressure relief valve
• 3/4" E3 service valve kit (IPS or PRESS connections)
COMPLETE KITS COMPATIBLE WITH SELECT BOILERS FROM:*
• WILLIAMSON-THERMOFLO
BOILER
FEATURES:
• 1 1/4 x 1” Hydro-Core Double Ball Drain Manifold
• Choice of FIP, SWT or PRESS connections
• Insulated supply & return lines assembled from Hydro-Core Flex Tubing
• Integrated 1“ male x ¾” female boiler connections
• Plugged FIP ports for connection to other devices
• 3/4" E3 service valve kit (IPS or PRESS connections)
Have an unusual set of system
requirements or a particularly
unique area to work within?
Craft your own kit - all Hydro-Core
components are available for
individual purchase. A solution is
available for any given need.
3
2
1

© Webstone Company Inc 2016 Rev 5/2/2016

Transcription

Similar documents

PR O D U C T C A TA LO G

OEM Replacement Parts