Angle Nutrunners - Air Actuated Shutoff

Transcription

Assembly Technologies
LIMITED WARRANTY
Mechanical Products Limited Warranty:
The Stanley Works (“Stanley”) warrants its Assembly
Technologies mechanical products to the original
purchaser to be free from deficiencies in material or
workmanship for the useful life of the product.
Under this lifetime limited warranty Stanley will, at its
discretion, repair or replace any product which, upon
inspection, is acknowledged by Stanley to be defective.
This limited lifetime warranty shall apply to products
which have been used under normal operating conditions
for their intended use and shall not apply to products
which have been subjected to: abnormal wear and tear,
abuse, misuse, improper maintenance, negligence,
continued use after partial failure, accident, alterations or
repairs with non-genuine Stanley replacement parts.
Electronic Products Limited Warranty:
Stanley warrants its Assembly Technologies electronic
products to the original purchaser to be free from
deficiencies in material or workmanship for a period of
one year after the date of shipment.
Under this limited warranty Stanley will, at its discretion,
repair or replace any product which, upon inspection, is
acknowledged by Stanley to be defective.
This warranty shall apply to products which have been
used under normal operating conditions for their intended
use and shall not apply to products which have been
subjected to:
abnormal wear and tear, neglect,
component degradation, improper handling, overload,
abuse, misuse, improper maintenance, use with improper
accessories, or where alterations have been made.
Software Products Limited Warranty:
OEM Products Limited Warranty:
Some Stanley Assembly Technologies custom engineered
systems include components manufactured by others. The
limited warranties of each individual manufacturer shall
apply to these components and Stanley makes no
representation or warranty of any kind, expressed or
implied, with respect to such components.
General Terms:
This limited warranty gives you specific legal rights and is
in lieu of all other warranties, expressed or implied,
including the implied warranties of merchantability and
fitness for a particular purpose. Some states and countries
do not allow limitations on implied warranties, so the
above may not apply to you. You may also have other
rights which vary by state or country.
Stanley shall not be responsible for incidental or
consequential damages or the inability to use its products
for any purpose whatsoever. Stanley's maximum liability
shall not in any case exceed the contract price for the
products claimed to be defective. Some states and
countries do not allow the exclusion or limitation of
incidental or consequential damages, so this specific
limitation or exclusion may not apply to you.
Specification Changes:
Stanley retains the right to discontinue and/or change
specifications of any Assembly Technologies products
without responsibility for incorporating changes in
products already sold.
Warranty Claims:
To apply for warranty consideration, the original
purchaser should take the following action:
Stanley warrants its Assembly Technologies software
products to the original purchaser to be free from
deficiencies in material or workmanship for a period of
one year after the date of shipment.
a) Contact the Stanley Assembly Technologies
customer service department to obtain a "Return
Authorization Number" and "Warranty Claim Report
Form.”
Under this limited warranty Stanley will, at its discretion,
make available replacement software or an upgrade for
any product which, upon inspection, is acknowledged by
Stanley to be defective. Installation of the software shall
be the responsibility of the requestor.
b) Package the product including proof of purchase and
the completed warranty claim form.
This warranty shall apply to products which have been
used with specified, compatible hardware under normal
operating conditions for their intended use and shall not
apply to products which have been: modified, misused,
improperly handled, improperly maintained, or used with
non-compatible hardware or accessories.
c) Note the Return Authorization Number on the
exterior of the package and return freight to:
Stanley Assembly Technologies
5335 Avion Park Drive
Cleveland, Ohio 44143-2326
In the event that a product is repaired or replaced under the
terms of the warranty, the warranty period of the repaired
or replacement product shall be limited to the remaining
portion of the original warranty period.
Intelligent
Air Shutoff Tool Selector
Straight Pistol
Straight Handheld or Fixtured
Angle
2
2
2
3
Hold & Drive
5
Crowfoot/Tubenut Angle
4
Clutch Shutoff Tool Selector
Straight Lever
Angle
2
2
3
Hold & Drive
5
Crowfoot/Tubenut Angle
4
Pulse Tool Selector
2
Straight
2
Pistol
2
Air Shutoff Tool Specification and Configuration
Straight Pistol (1 to 2035 Nm)
6
Straight Lever (10 to 2035 Nm)
8
Angle Lever (2 to 450 Nm)
10
Flush Angle Lever (2 to 450 Nm)
13
Hold & Drive Lever (63 to 155 Nm)
16
Crowfoot Lever (1.4 to 26 Nm)
17
Tubenut Lever (6.5 to 47 Nm)
17
Clutch Shutoff Tool Specification and
Configuration
Straight Lever (4.5 to 48 Nm)
18
Angle Lever (3 to 150 Nm)
19
Flush Angle Lever (3 to 150 Nm)
21
Hold & Drive Lever (15 to 135 Nm)
23
Crowfoot Lever (6 to 60 Nm)
27
Tubenut Lever (10 to 44 Nm)
28
Prime Mover Motors
30
Validation Accessories
30
Pulse & Impact Tools
31
PSI Controllers and Qualifiers
33
How to Use the Air Tool
Catalog
1. To select a tool using job criteria, see the Tool Selector
starting on page 2.
2. To configure a specific tool, see the pages under Tool
Specification and Configuration.
3. Select required options.
0807
www.StanleyAssembly.com
Tool Selector
Selection Instructions:
A
I S
R T
R
S A
H I
U G
T H
O T
L F
E F
V
E
R
C
T
N S
O T
N R
P
I
S
T
O
L
S P
O U
L
S
T E
R
A
N
S
D
U
C I
E M
R P
A
C
T
Tool Clearance
Torque Range "R" Side to Center "H" Height/QC Chuck
Nm
in lb
mm
inch
mm
inch
1.0 - 3.5
9 - 33
140
5.5
21
0.81
146
5.75
2.8 - 9
25 - 80
21
0.81
160
6.3
6.5 - 13 58 - 115
21
0.81
Torque Range "R" Side to Center "H" Height/Std Socket
Nm
ft lb
mm
inch
mm
inch
18 - 35 12.5 - 25
25
1
213
8
23 - 85
18 - 60
25
1
252
10
170 - 420 125 - 310
38
1.5
490
15
282 - 563 208 - 415
38
1.5
503
16
212 - 424 157 - 313
38
1.5
372
14.8
264 - 1435 195 -1060
38
1.5
385
15.3
438 - 2035 323 - 1500 44
1.7
448
18
350 - 1735 258 - 1280 44
1.7
461
18
10 - 20 7.5 - 15
25
1
404
15.9
27 - 53
20 - 40
25
1
429
16.9
33 - 90
25 - 65
25
1
442
17.4
14 - 28 10.5 - 53
25
1
404
17.4
22 - 72
16 - 53
25
1
442
17.4
105 - 325 78 - 240
35
1.38
539
21.2
190 - 380 14 - 280
38
1.5
542
21
263 - 1280 193 - 945
38
1.5
555
21.5
815 - 2035 600 - 1500 43.7
1.72
667
26.2
4.5 - 23 3.3 - 17
23
0.91
382
15.1
15 - 48
11 - 35
23
0.91
469
18.5
7 - 15
5 - 11
25
1
211
8.3
15 - 35
11 - 26
28
1.1
234
9.2
35 - 70
26 - 52
28
1.1
267
10.5
7 - 15
5 - 11
25
1
178
7
15 - 35
11 - 26
28
1.1
195
7.7
35 - 70
26 - 52
28
1.1
211
8.3
60 - 120 29 - 88
33
1.3
247
9.7
100 - 200 74 - 147
39
1.5
267
10.5
0.9
13 - 25
9 - 18
23
199
7.8
20 - 40
15 - 30
25
1.0
199
7.8
35 - 70
25 - 50
25
1.0
220
8.7
60 - 120 42 - 84
30
1.2
253
10
0.9
25 - 50
18 - 36
23
167
7.3
63 - 125 44 - 88
28
1.1
221
8.7
110 - 220 80 - 162
31
1.2
273
10.7
0.9
67 - 135 50 - 100
23
218
8.6
360 - 700 270 - 515
38
1.5
434
17.1
2
H
R
Catalog
Model
Page
A30URTA
A30URTA - 16
A30URTA
6
Catalog
Model
A40SBTA - 9
A40SBTA
A40SRB4TA
A40SRB4TA - 030
A40SB4TA - 063
7
A40SB4TA
A40SB5TA
A40SRB5TA
A40LBTPJ - 15
A40LBTPJ - 6
A40LBTPJ
8
A40LRBTP - 7
A40LRBTP
A40LB3TPJ
A40LB4TPJ- 063
9
A40LB4TPJ
A40LB5TPJ
A32LB
18
A33LB2
P2LR-15
P3LR-35
P3LR-70
P2PR-15
32
P3PR-35
P3PR-70
P4PR-120
P5PR-200
PA2PRX-25
PA3PRX-40
PA3PRX-70
PA4PRX-120
31
KA3PRX-50
KA3PRX-125
KA4PRX-220
KB3PRX-135
KB5PRX-700
1 ½” added
for lever tool
clearance
dimensions
OFF
R
P
I
S
T
O
L
H
R
Output Type
Shutoff
Tool Style
Work Space
H
1. Select the Tool Style and Output Type.
2. Select the Torque Range that fits the fastener torque.
3. Ensure Tool Clearance fits your Work Space.
4. Find the Catalog Model and Page.
NOTE: All Tool Styles are operator controlled except
Motors. Also consider tool ergonomics when selecting
Tool Style and Output.
0807
Angle Tool Selector
Output Type
Shutoff
Tool Style
A
N
G
L
A E
I
R
S
L H A
E U N
V T G
E O L
R F E
F
F
L
U
S
H
Tool Clearance
Nm
ft lb
mm
inch
mm
inch
1.8 - 20.5 1.3 - 15.2
13
0.5
72
2.8
12.5 - 33 9 - 25
17.5
0.69
78
3
17 - 54
12 - 40
17.5
0.69
78
3
15.5 - 75 11.5 - 55
22
0.87
102
4
34 - 126 25 - 93
22
0.87
102
4
63 - 126 47 - 93
26
1.03
111
4.4
63 - 156 47 - 115
26
1.03
111
4.4
103 - 205 75 - 150
26
1.03
117
4.7
139 - 278 103 - 205
26
1.03
117
4.7
103 - 205 75 - 150
32
1.25
128
5.1
140 - 280 103 - 205
32
1.25
128
5.1
225 - 450 165 - 330
32
1.25
138
5.4
1.8 - 20.5 1.3 - 15.2
13
0.5
34
1.3
12.5 - 33 9 - 25
17.5
0.69
40
1.5
17 - 54
12 - 40
17.5
0.69
40
1.5
15.5 - 75 11.5 - 55
22
0.87
51
2.0
34 - 126 25 - 93
22
0.87
51
2.0
63 - 126 47 - 93
26
1.03
60
2.4
63 - 156 47 - 115
26
1.03
60
2.4
103 - 205 75 - 150
26
1.03
60
2.4
139 - 278 103 - 205
26
1.03
60
2.4
103 - 205 75 - 150
32
1.25
71
2.8
140 - 450 103 - 330
32
1.25
71
2.8
Work Space
H
R
Catalog
Model
A30L_ATA
A30L_A2ATA
A40LATPJM
A40LRA2TPM
A40LA2TJPM
A40LRA3TPM
A40LA3TPJM
A40LRA4TP
A40LA4TPJ
A40LRA5TP
A40LA5TPJ
A40LA5TPJ
A30L_ATA
A30L_A2ATA
A40LATPJM
A40LRA2TPM
A40LA2TJPM
A40LRA3TPM
A40LA3TPJM
A40LRA4TP
A40LA4TPJ
A40LRA5TP
A40LA5TPJ
Page
R
10
H
11
Angle
12
13
14
15
R
16
H
Flush Angle
Output Type
Shutoff
Tool Style
Tool Clearance
Nm
ft lb
mm
inch
mm
inch
L C A
3 -15
2 - 11
13
0.5
72
2.8
E L N 7 - 30
5 - 22
14
0.55
73
2.9
V U G 19 - 40
14 - 29
17.5
0.69
78
3.1
E T L 13 - 30
10 - 22
14
0.55
73
2.9
R C E 18 - 59
14 - 44
17.5
0.69
78
3.1
H
34 - 90
25 - 66
22
0.87
101
4.0
68 - 150 50 - 110
26
1.03
111
4.4
L C F
3 -15
2 - 11
13
0.5
34
1.3
E L L 19 - 40
14 - 29
17.5
0.69
47
1.9
V U U 18 - 59
14 - 44
17.5
0.69
47
1.9
E T S 34 - 90
25 - 66
22
0.88
47
1.9
R C H 68 - 150 50 - 110
26
1.02
60.2
2.4
H
A
N
G
L
E
0807
Catalog
Model
A32RAA
A32L_A
A32L_A2ACT
A33L_A1ACT
A33L_A2ACT
A33L_A3CT
A33L_A4CT
A32RAA
A32L_A2ACT
A33L_A2ACT
A33L_A3CT
A33L_A4CT
Page
19
20
21
22
3
Crowfoot Tool Selector
Work Space
REACH
R
H
R
H
Output Type
Shutoff
Tool Clearance
Reach Max Hex Size Catalog
Tool Style
A
Nm
ft lb
mm
inch
mm
inch
mm inch mm (in)
Model
Page
I C 1.4 - 12.7 1 - 9.4
12.7
0.5
46 1.8
13 (1/2) F30LR8TA
16
0.64
17
R R 15 - 26
11 - 19
13.5
0.53
75
3
13 (1/2) F30L69TA
16
0.63
L C O 8.5 - 21 6.5 - 15.5 13.5
0.53
75
3
13 (1/2) F32L69ACT
16
0.63
E L W 6 - 22
4.5 - 16
13.5
0.53
43 1.7
13 (1/2) F32LR69ACT
16
0.63
V U F 13 - 31 9.5 - 23
13.5
0.53
43 1.7
13 (1/2) F33L69ACT
16
0.63
E T O 9 - 28
6.5 - 21
13.5
0.53
75
3
13 (1/2) F33LR69ACT 27
16
0.63
R C O 17 - 38
12 - 28
15.7
0.62
71 2.8
13 (1/2) F33L246ACT
20.5
0.81
H T 9.5 - 30
7 - 22
20.5
0.81
38 1.5
19 (3/4) F33LR29ACT
14
0.55
22 - 60
16 - 44
20.5
0.81
38 1.5
19 (3/4) F33LR10CT
28
1.1
Tubenut Tool Selector
REACH
R
H
Output Type
Shutoff
Tool Style
L A
E I T
V R U
E C B
R L E
U N
T U
C T
H
4
Tool Clearance
Nm
ft lb
mm
inch
mm
inch
12 - 24
9 - 18
8.6
0.334
14
0.54
12.5 - 25 9.5 - 19
13
0.52
14
0.54
7.5 - 21 5.5 - 15.5 18.5
0.73
14.5
0.57
12 - 47
9 - 35
21.3
0.84
18
0.7
14 - 20
10 - 15
13
0.52
14
0.54
15 - 21 11 - 15.5
8.6
0.34
14
0.54
10 - 21 8 - 15.5
18.5
0.73
14.5
0.57
21 - 30
15 - 22
18.5
0.73
14.5
0.57
16 - 44
12 - 32
21.3
0.84
18
0.7
Reach Max Hex Size Catalog
mm inch mm (in)
Model
Page
42 1.65
13 (1/2) F30L346ATA
42 1.65
13 (1/2) F30L252TA
17
48 1.88 18 (11/16) F30L74ATA
54 2.13 24 (15/16) F30L264TA
42 1.65
13 (1/2) F32L252CT
42 1.65
13 (1/2) F33L346ACT
28
48 1.88 18 (11/16) F32L74ACT
48 1.88 18 (11/16) F33L74ACT
54 2.13 24 (15/16) F32L264CT
0807
Hold & Drive Tool Selector
2. Select the Torque Range that fits the fastener
Work Space
H
H
Reach for 0
extended socket
R
R
Output Type
Shutoff
Tool Style
Torque Range
L
H
E A O
Nm
ft lb
V I L 34 - 155 25 - 115
E R D 34 - 155 34 - 155
R C
18 - 80
11 - 63
L & 68 - 120 44 - 100
U
T D
C R
H I
V
E
0807
Tool Clearance
1" Travel
"R" Side to Center "H" Height/Std Socket Minimum Reach
mm
inch
mm
inch
mm
inch
26
1.03
117
4.62
51
2
26
1.03
117
4.62
51
2
22
0.87
51
2
118
4.65
26
1.03
51
2
117
4.62
Catalog
Model
A40LA3HTPM
A40LA3HTPJM
A33L_A3HCT
A33L_A4HCT
Page
16
23
5
Pistol Grip Nutrunners - Air Actuated Shutoff
Tool Configuration
Select model and options.
L
L
MODEL
R.P.M.
OFF
R
R
Reversible Models
Reversible Models
A30UTA
A40SBTA
Rated
Speed
Torque Range
MODEL
Reversible
RPM
Nm
lb in
A30URTA-36
2600
1.0 - 2
9.0 - 17
A30URTA-25
1850
1.4 - 2.7
12.0 - 24
A30URTA-18
1360
1.8 - 3.5
17 - 33
A30URTA-13
1000
2.8 - 5.6
25 - 50
A30URTA-7
550
4.5 - 9
40 - 80
A30URTA-5
385
6.5 - 13
58 - 115
Standard Configuration
F3504 Side Exhaust Deflector
Exhaust Option
F3505 Front Exhaust Deflector
"R"
"L"
Side to Center
Length
Output
Weight
mm
in
mm
in
kg
lb
Standard
21
0.81
140
6.3
0.9
2
1/4" QC
21
0.81
140
5.5
0.9
2
1/4" QC
21
0.81
140
5.5
0.9
2
1/4" QC
21
0.81
146
5.75
0.9
2
1/4" QC
21
0.81
146
5.75
0.9
2
1/4" QC
21
0.81
160
6.3
1
2.3
1/4" QC
Mounting Options
B3432 Swivel Bail
A3294 Horzontal Bail
A3486 Dead Handle Ass’y (Recommended for Max Torque >7 Nm, 60 lb in)
Rated
Speed
Torque Range
MODEL
Non-Reversible
RPM
Nm
lb in
A40SBTA-9
840
18 - 35
12.5 - 25
A40SBTA-6
560
23 - 45
18 - 35
A40SBTA-4
330
43 - 85
30 - 60
A4517 Aluminum Torque Bar
Mounting Options
F4016 Swivel Bail
A4072 Steel Torque Bar
J4380 Ext Torque Bar
H1166 Base Mount Bracket
"R"
"L"
Side to Center
Length
mm
in
mm
in
25
1
175
6.9
25
1
201
7.9
25
1
201
7.9
A40_B Spindle Options
20D117800 3/8" SD Anti Vibration
L4933 3/8" SD X 13-1/2" Ext
A4077 3/8" SD X 2-1/2" Ext
A4263 3/8" SD X 5-1/2" Ext
H4931 3/8"-24 Threaded
J4247 3/8"-24 Thread X 4" Ext
A4263/1 3/8"-24 Thread X 5-1/2" Ext
B4649 3/8"-24 Thread X 6" Ext
kg
2.2
2.5
2.5
Weight
lb
4.9
5.5
5.5
A4498
A4865
H4099
A4775
A4641
A4642
A4079
H4098
M4430
Output
Standard
3/8" SD
3/8" SD
1/2" SD
1/2" SD X 1-1/8" Ext
1/2" SD X 1-1/2" Ext
1/2" SD X 12-1/2" Ext
1/2" SD X 2-1/2" Ext
1/2" SD X 4" Ext
1/2" SD X 6" Ext
1/2" SD X 8-1/2" Ext
1/2" SD X 9-1/2" Ext
1/2"-20 Threaded
Note:
Performance specifications @ 620 Pa (90 psi). Air Inlet A30: 1/4” NPT (1/4” ISO Inlet Option), A40: 3/8” NPT (3/8” ISO Inlet Option), Air Consumption
A30: 15 l/s (32 ft3/m), A40: 20 l/s (40 ft3/m), Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: A30 5/16” ID, A40 3/8” ID
6
0408
Swivel Pistol Grip Nutrunners - Air Actuated Shutoff
L
R
A40S_B4TA
Reversible Models
L
R
Reversible Models
A40S_B5TA
Rated
"R"
"L"
Speed
Torque Range
Side to Center
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
kg
lb
Standard
A40SB4TA-063
63
212 - 424
157 - 313
38
15
305
12.2
7.8
17.1
3/4" SD
A40SB4TA-050
50
264 - 527
195 - 389
38
15
305
12.2
7.8
17.1
1" SD
A40SB4TA-038
38
356 - 712
263 - 525
38
1.5
305
12.2
7.8
17.1
1" SD
A40SB4TA-023
23
580 - 1160
428 - 855
38
15
305
12.2
7.8
17.1
1" SD
A40SB4TA-018
18
718 - 1435 530 - 1060
38
15
305
12.2
7.8
17.1
1" SD
Reversible
A40SRB4TA-050
50
170 - 340
125 - 250
38
15
423
12.7
8
17.5
3/4" SD
A40SRB4TA-040
40
210 - 420
155 - 310
38
1.5
423
12.7
8
17.5
3/4" SD
A40SRB4TA-030
30
282 - 563
208 - 415
38
15
423
12.7
8
17.5
1" SD
A40_B4 Spindle Options
F4192 Steel Torque Bar
F4258 1" SD (SB-063, SRB-50, SRB-40 Models)
Mounting Options
F4402 1" SD X 3-3/8" Ext Output SpindleF4485 Slave 3/4” Reaction Drive Torque Bar
F4232 Swivel Bail
[62-173mm (2.4-6.8in) Adjustment Centers]
F4201 Base Mount Bracket
F4857 Slave 3/4” Reaction Drive Torque Bar
20K101100 Mounting Flange
w/Handle [62-173mm (2.4-6.8in) Adjustment Centers]
Rated
"R"
"L"
Speed
Torque Range
Side to Center
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
kg
lb
Standard
A40SB5TA-029
29
438 - 875
323 - 645
44
1.7
368
14.5
10.9
24
1" SD
A40SB5TA-019
19
650 - 1300
480 - 960
44
1.7
368
14.5
10.9
24
1" SD
A40SB5TA-015
15
813 - 1625 600 - 1200
44
1.7
368
14.5
10.9
24
1" SD
A40SB5TA-011
11
1018 - 2035 750 - 1500
44
1.7
368
14.5
10.9
24
1" SD
Reversible
A40SRB5TA-023
23
350 - 700
258 - 515
44
1.7
381
15
11.1
24.4
1" SD
A40SRB5TA-015
15
525 - 1050
388 - 775
44
1.7
381
15
11.1
24.4
1" SD
A40SRB5TA-013
13
645 - 1290
475 - 950
44
1.7
381
15
11.1
24.4
1" SD
A40SRB5TA-009
9
868 - 1735 640 - 1280
44
1.7
381
15
11.1
24.4
1" SD
F4192 Steel Torque Bar (Models < 1500 Nm)
J4228 Steel Torque Bar (Models > 1500 Nm)
Mounting Options
F4857 Slave 3/4” Reaction Drive Torque Bar w/Handle [62-173mm (2.4-6.8in) Adjustment Centers]
F4232 Swivel Bail
F4485 Slave 3/4” Reaction Drive Torque Bar [62-173mm (2.4-6.8in) Adjustment Centers]
Note:
Performance specifications @ 620 Pa (90 psi). Air Inlet 3/8” NPT (3/8” ISO Inlet Option), Air Consumption: 20 l/s (40 ft3/m)
Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 1/2” ID
0408
7
Straight Nutrunners - Air Actuated Shutoff
Tool Configuration
L
STANLEY AIR TOOLS
MADE IN U.S.A.
R
A40LBTP
Rated
"R"
"L"
Speed
Torque Range
Side to Center
Length
MODEL
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
kg
lb
A40LBTPJ-15
1440
10 - 20
7.5 - 15
25
1
328
12.9
2.2
5
A40LBTPJ-6
600
27 - 53
20 - 40
25
1
353
13.9
2.4
6
A40LBTPJ-5
480
33 - 65
25 - 50
25
1
353
13.9
2.4
6
A40LBTPJ-4
360
45 - 90
33 - 65
25
1
353
13.9
2.4
6
Reversible
A40LRBTP-7
500
14 - 28
10.5 - 21
25
1
353
13.9
2.4
5.3
A40LRBTP-5
330
22 - 43
16 - 32
25
1
353
13.9
2.4
5.3
A40LRBTP-4
270
27 - 53
20 - 39
25
1
353
13.9
2.4
5.3
A40LRBTP-3
200
36 - 72
27 - 53
25
1
353
13.9
2.4
5.3
A4517 Aluminum Torque Bar
L4933 3/8" SD X 13-1/2" Ext
B4649 3/8"-24 Thread X 6" ExtA4641
Mounting Options
A4077 3/8" SD X 2-1/2" Ext
A4498 1/2" SD X 1-1/8" Ext A4642
F4016 Swivel Bail
A4263 3/8" SD X 5-1/2" Ext
A4865 1/2" SD X 1-1/2" Ext A4079
H4931 3/8"-24 Threaded
H4099 1/2" SD X 12-1/2" Ext H4098
J4380 Ext Torque Bar
J4247 3/8"-24 Thread X 4" Ext A4775 1/2" SD X 2-1/2" Ext M4430
A4263/1 3/8"-24 Thread X 5-1/2" Ext
Output
Standard
3/8" SD
3/8" SD
1/2" SD
1/2" SD
3/8" SD
1/2" SD
1/2" SD
1/2" SD
1/2" SD X 4" Ext
1/2" SD X 6" Ext
1/2" SD X 8-1/2" Ext
1/2" SD X 9-1/2" Ext
1/2"-20 Threaded
L
STANLEY AIR TOOLS
MADE IN U.S.A.
R
A40LB3TP
Rated
"R"
"L"
Speed
Torque Range
Side to Center
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
kg
lb
Standard
A40LB3TPJ-015
130
105 - 210 78 - 155
35
1.38
434
17.1
6
13.25
3/4" SD
A40LB3TPJ-009
85
163 - 325 120 - 240
35
1.38
434
17.1
6
13.25
3/4" SD
B4487 Steel Torque Bar
B4493 3/4" SD X 3-3/4" Ext Output Spindle
Mounting Options
N4351 3/4” SD X 7-1/2” Ext Output Spindle
F4015 Swivel Bail
J4027 Slave 3/4” Reaction Drive Torque Bar [57-152mm (2.2-6in) Adjustment Centers]
J4028 Slave 3/4” Reaction Drive Torque Bar w/Handle [57-152mm (2.2-6in) Adjustment Centers]
N4580 Slave 3/4” Reaction Drive Torque Bar (Aluminum) w/Handle [57-152mm (2.2-6in) Adjustment Centers]
Note:
8
0408
Straight Nutrunners - Air Actuated Shutoff
L
Tool Configuration
STANLEY AIR TOOLS
MADE IN U.S.A.
R
A40LB4TPJ
Rated
"R"
"L"
Speed
Torque Range
Side to Center
Length
MODEL
Output
Weight
lb ft
Non-Reversible
RPM
Nm
lb ft
mm
in
kg
lb
Standard
A40LB4TPJ-063
57
190 - 380
140 - 280
38
1.5
437
16.9
8
17.7
3/4" SD
A40LB4TPJ-050
50
263 - 525
193 - 385
38
1.5
437
16.9
8
17.7
1" SD
A40LB4TPJ-038
40
405 - 810
298 - 595
38
1.5
437
16.9
8
17.7
1" SD
A40LB4TPJ-023
20
515 - 1030 380 - 760
38
1.5
437
16.9
8
17.7
1" SD
A40LB4TPJ-018
17
640 - 1280 473 - 945
38
1.5
437
16.9
8
17.7
1" SD
F4402 1" SD X 3-3/8" Ext Output Spindle
Mounting Options
Non Transducerized Models Only
F4232 Swivel Bail
F4485 Slave 3/4” Reaction Drive Torque Bar
F4201 Reaction Base Mount
20K101100 Flange
F4857 Slave 3/4” Reaction Drive Torque Bar w/Handle
[62–173mm (2.4–6.8in) Adjustment Centers]
L
STANLEY AIR TOOLS
MADE IN U.S.A.
R
A40LB5TPJ
Rated
Speed
Torque Range
MODEL
Non-Reversible RPM
Nm
lb ft
A40LB4TPJ-063
57
190 - 380
140 - 280
A40LB4TPJ-050
50
263 - 525
193 - 385
A40LB4TPJ-038
40
405 - 810
298 - 595
A40LB4TPJ-023
20
515 - 1030 380 - 760
A40LB4TPJ-018
17
640 - 1280 473 - 945
Mounting Options
F4232 Swivel Bail
F4485
F4857
"R"
Side to Center
lb ft
38
1.5
38
1.5
38
1.5
38
1.5
38
1.5
"L"
Length
Output
Weight
mm
in
kg
lb
Standard
437
16.9
8
17.7
3/4" SD
437
16.9
8
17.7
1" SD
437
16.9
8
17.7
1" SD
437
16.9
8
17.7
1" SD
437
16.9
8
17.7
1" SD
F4402 1" SD X 3-3/8" Ext Output Spindle
Slave 3/4” Reaction Drive Torque Bar
Slave 3/4” Reaction Drive Torque Bar w/Handle
[62–173mm (2.4–6.8in) Adjustment Centers]
Note:
0408
9
Angle Nutrunners Air Actuated Shutoff
Tool Configuration
L
L
H
H
A30LATA
R
A30LA2ATA
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Standard
A30LATA-30
2900
2.2 - 4.3 1.6 - 3.2
13
0.5
34
1.32 206
8.1
0.9
1.9
3/8" SD
A30LATA-20
2000
3.2 - 6.4 2.4 - 4.7
13
0.5
34
1.32 206
8.1
0.9
1.9
3/8" SD
A30LATA-15
1500
4.3 - 8.5
6.3
13
0.5
34
1.32 206
8.1
0.9
1.9
3/8" SD
A30LATA-11
1100 5.8 - 11.5 4.3 - 8.5
13
0.5
34
1.32 213
8.4
0.9
1.9
3/8" SD
A30LATA-6
620 10.3 - 20.5 7.6 - 15.2 13
0.5
34
1.32 226
8.9
0.9
2.4
3/8" SD
Reversible
A30LRATA-24
2100
1.8 - 3.5 1.3 - 2.5
13
0.5
34
1.32 226
8.9
1
2.1
3/8" SD
A30LRATA-16
1450
2.7 - 5.3
2.0 - 4
13
0.5
34
1.32 226
8.9
1
2.1
3/8" SD
A30LRATA-12
1050
3.5 - 7
2.6 - 5.2
13
0.5
34
1.32 226
8.9
1
2.1
3/8" SD
A30LRATA-9
800
4.8 - 9.5
3.5 - 7
13
0.5
34
1.32 234
9.2
1
2.1
3/8" SD
A30LRATA-5
425
9 - 18
6.5 - 13
13
0.5
34
1.32 248
9.7
1
2.1
3/8" SD
A30LRA2ATA-3
300
12.5 - 25 9.0 - 18 17.5 0.69
40
1.56 297
11.7
1.2
2.6
3/8" SD
A30LRA2ATA-2
225
16. 5 - 33 12.5 - 25 17.5 0.69
40
1.56 297
11.7
1.6
3.6
3/8" SD
Other Options
Mounting Options
A30L_A Output Options
A30L_A2A Output Options
A3061 Vertical Bail
*B3117 3/8” Double Ended SD
F3832 1/4" internal Hex
M3131 Exhaust Collector
B3432 Swivel Bail (LA-6, LRA-5) A3156 1/4” SD
F3833 5/16" internal Hex
Gearcase Extensions
A3157 1/4” Female Hex Magnetic
*F3828 3/8" Double Ended SD
Add 4E to Model# 4" A/A2A Models
A3158 3/8”-24 Threaded Magnetic
F3829 1/2" SD
A3441 5/16”-24 Threaded Female
F3973 3/8" SD Paint Mark Angle Head
Add 10E to Model# 10" A2A Models
A3351 1/4”-28 Threaded Female
F3831 3/8"-24 FemaleThreaded
Example: A30LRATA-24-4E
F3376 Angle Head w/Avdel Attachment *F3830 1/2" Double Ended SD
Vinyl Head Cover Options
* For Right Hand Assembly Only
20D250705 A30_LA 20D250702 A30_LA2A
L
STANLEY AIR TOOLS
MADE IN U.S.A.
H
R
A40LATPJM
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Standard
A40LATPJM-10
975
17 - 33
12 - 24
17.5 0.69
40
1.56
429
16.9
2.5
5.4
3/8" SD
A40LATPJM-6
600
27 - 54
20 - 40
17.5 0.69
40
1.56
455
17.9
2.7
5.9
3/8" SD
Gearcase Extensions
A40L_A Output Options
Add 4E to Model# 4" A40L_A Models
B4723 1/4"internal Hex
B4755 3/8"- 24 Threaded Female/Reaction: Screw in Flush Socket
L4633 5/16" Hex Female/Reaction B4192 3/8"- 24 Threaded Female/Screw in Flush Socket
B4863 5/16"internal Hex
A4066 1/2" SD (Non Rev Only)
Example: A40LATPM-6-4E
A4065 3/8" Double Ended SD
A4067 1/2" SD Double Ended (Non Rev Only)
Vinyl Head Cover Option
20D117800 3/8" SD Anti Vibration
B4742 1/2" SD w/Reaction (Non Rev Only)
20D250702
A4427 3/8" SD w/Paint Marker
A4069 1/2"-20 Angle Head
Other Options
Mounting Options
B4368 3/8" SD w/Reaction
S7674 Exhaust Collector
J4354 Swivel Bail
N4433 Split Reaction Bar
A4590 Reaction Bar
Note:
10
0408
Special Output Options
Pinch Point Protectors
Output
A30_LA
A32A1A
A30_LA2A
40A2
Guided Ext Collars
3/8" SD P/N 1/2" SD P/N
20D243002
20D243103
20D243202 20D243205
20D243405
Ultralite Extensions
Ext
Output
3/8" SD P/N 1/2" SD P/N Length
20D243003
A30_LA
4"
20D243104
A32A1A
6"
20D243203 20D243206
A30_LA2A
8"
20D243406
40A2
10"
12"
Each Guided Ext Collar
Requires an Ultralite Extension
3/8 SD P/N
20D124404
20D124406
20D124408
20D124410
20D124412
1/2 SD P/N
20D124504
20D124506
20D124508
20D124510
20D124512
L
STANLEY AIR TOOLS
MADE IN U.S.A.
OFF
H
Tool Configuration
R
Rated
"R"
"H"
Speed
Side to Center
Torque Range
Height
MODEL
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
A40LA2TPJM-5
475
34 - 68
25 - 50
22
0.87
51
2
A40LA2TPJM-4
320
51 - 102
38 - 75
22
0.87
51
2
A40LA2TPJM-3
255
63 - 126
47 - 93
22
0.87
51
2
Reversible
A40LRA2TPM-6
530
15.5 - 31 11.5 - 23
22
0.87
51
2
A40LRA2TPM-4
320
25 - 50
19 - 37
22
0.87
51
2
A40LRA2TPM-3
215
38 - 75
28 - 55
22
0.87
51
2
A40LRA2TPM-2
175
47 - 94
35 - 69
22
0.87
51
2
Gearcase Extensions
A40L_A2 Output Options
Add 4E to Model# 4" A40L_A2 F4809 1/2" SD Keyed w/Reaction
F4804
Add 8E to Model# 8" A40L_A2 F4802 1/2"-20 Threaded Drive Male Keyed
F4801
Add 10E to Model# 10" A40L_A2 F4803 1/2"-20 Threaded Drive Keyedintegral
Example: A40LA2TPM-5-4E
F4814 1/2"-20 Threaded internal Keyed w/Reaction
20D250708
"L"
Length
mm
in
480
18.9
480
18.9
480
18.9
455
480
480
480
Weight
kg
lb
3.3
7.3
3.3
7.3
3.3
7.3
Output
Standard
1/2" SD
1/2" SD
1/2" SD
17.9
18.9
18.9
18.9
3.1
6.8
1/2" SD
3.3
7.3
1/2" SD
3.3
7.3
1/2" SD
3.3
7.3
1/2" SD
Mounting Options
3/8" SD
J4354 Swivel Bail
Keyed 1/2" SD
A4590 Angle Head Reaction Bar
Double End
N4433 Angle Head Split Reaction Bar
Other Options
L
STANLEY AIR TOOLS
MADE IN U.S.A.
H
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Standard
A40LA3TPJM-3
255
63 - 126
47 - 93
26
1.03
60
2.35
480
18.9
3.6
8
1/2" SD
A40LA3TPJM-2
200
78 - 156 58 - 115
26
1.03
60
2.35
480
18.9
3.6
8
1/2" SD
Reversible
A40LRA3TPM-1
130
63 - 126
47 - 93
26
1.03
60
2.35
480
18.9
3.6
8
1/2" SD
Gearcase Extensions
Mounting Options
Other Options
Add 4E to Model# 4" A40L_A3
F4810 1/2" SD w/Reaction
F4811 1/2"-20 Threaded Keyed
F4806 5/8" SD
J4354 Swivel Bail
20D250704
0408
11
L
Tool Configuration
STANLEY AIR TOOLS
MADE IN U.S.A.
H
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Standard
A40LA4TPJ-011
110
139 - 278 103 - 205 26
1.03
541
21.3
541
21.3
5
11
5/8" SD
Reversible
A40LRA4TP-008
75
103 - 205 75 - 150
26
1.03
546
21.5
546
21.5
4.7
10.4
5/8" SD
Gearcase Extensions
Other Options
Mounting Options
A5184 1/2" SD
N4300 Exhaust Collector
A5189 1/2" SD w/Reaction
F4015 Swivel Bail
Vinyl Head Cover Option 20D250704
L
STANLEY AIR TOOLS
MADE IN U.S.A.
H
R
Rated
"R"
Speed
Torque Range
Side to Center
MODEL
mm
Non-Reversible RPM
Nm
lb ft
A40LA5TPJ-011
110
140 - 280 103 - 205 32
1.25
A40LA5TPJ-006
60
225 - 450 165 - 330 32
1.25
Reversible
A40LRA5TP-008
60
103 - 205 75 - 150
32
1.25
Gearcase Extensions
A5455 5/8" SD Keyed
"H"
Height
in
mm
71
2.8
71
2.8
71
"L"
Length
in
mm
554
21.8
554
21.8
Weight
in
kg
5.2
12.3
5.2
12.3
Output
Standard
5/8" SD
3/4" SD
2.8
554
21.8
5.6
12.3
5/8" SD
Mounting Options
Other Options
F4015 Swivel Bail
S5046 Base Mount Bracket
Vinyl Head Cover Option 20D250706
Note:
12
0408
Flush Angle Nutrunners - Air Actuated Shutoff
L
Tool Configuration
H
A30LATA
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
mm
in
A30LATA-30
2900
2.2 - 4.3 1.6 - 3.2
13
0.5
34
1.32
206
8.1
A30LATA-20
2000
3.2 - 6.4 2.4 - 4.7
13
0.5
34
1.32
206
8.1
A30LATA-15
1500
4.3 - 8.5
6.3
13
0.5
34
1.32
206
8.1
A30LATA-11
1100 5.8 - 11.5 4.3 - 8.5
13
0.5
34
1.32
213
8.4
A30LATA-6
620 10.3 - 20.5 7.6 - 15.2 13
0.5
34
1.32
226
8.9
Reversible
A30LRATA-24
2100
1.8 - 3.5 1.3 - 2.5
13
0.5
34
1.32
226
8.9
A30LRATA-16
1450
2.7 - 5.3
2.0 - 4
13
0.5
34
1.32
226
8.9
A30LRATA-12
1050
3.5 - 7
2.6 - 5.2
13
0.5
34
1.32
226
8.9
A30LRATA-9
800
4.8 - 9.5
3.5 - 7
13
0.5
34
1.32
234
9.2
A30LRATA-5
425
9 - 18
6.5 - 13
13
0.5
34
1.32
248
9.7
Mounting Options
A30_LA Flush Socket Options
A3061 Vertical Bail
J3823 5/16" Magnet.
B3686 7mm
B3432 Swivel Bail (LA-6, LRA-5) B3752 5/16" (8mm)
B3752 8mm (5/16")
Gearcase Extensions
B3751 1/4"
J3041 8mm X 1/4" Ext
B3753 3/8"
J3706 8mm X 1/16" Ext Magnetic
B3834 4mm
L3154 8mm Double Hex
A30_LA Vinyl Head Cover Option 20D250705
Example: A30LRATA-24-4E
Weight
kg
lb
0.9
1.9
0.9
1.9
0.9
1.9
0.9
1.9
0.9
2.4
1
1
1
1
1
Output
Flush Socket Head
2.1
2.1
2.1
2.1
2.1
B3754
F3667
J3100
L3073
B3755
B3755
10mm
10mm X 1/4" Ext Magnetic
L
H
A30LA2ATA
R
Rated
"R"
Speed
Torque Range
Side to Center
MODEL
Non-Reversible RPM
Nm
lb ft
mm
in
A30LRA2ATA-3
300
12.5 - 25 9.0 - 18
17.5
0.69
A30LRA2ATA-2
225
16. 5 - 33 12.5 - 25
17.5
0.69
Mounting Options
30_A2A Flush Socket Options
A3061 Vertical Bail
F4897 10mm
B3432 Swivel Bail (LA-6, LRA-5) J4979 10mm X 1" Ext
Gearcase Extensions
N4638 10mm X 3mm Ext
F4898 11mm
L4509 11mm X 5/8" Ext Mag
Example: A30LRA2ATA-3-4E
L4006 12mm
A30_LA2A Vinyl Head Cover Option
F4899 13mm
20D250702 A30_LA2A
L4543 13mm (1/2" Clearance)
L4834 13mm Magnetic
L4022 13mm Surf Dr
L4934 13mm Surf Dr X 10mm Ext
"H"
Height
mm
in
40
1.56
40
1.56
L4935
J4444
H4921
N4918
N4086
H4494
J4435
H4371
N4268
F4900
J4684
L4378
"L"
Length
mm
in
297
11.7
297
11.7
13mm Surf Dr X 5mm Ext
13mm X 1" Ext
13mm X 1/2" Ext
13mm X 1/4" Ext
13mm X 1/8" Ext
13mm X 12mm Ext
14mm
14mm Surf Dr X 30mm Ext
14mm X 1/4" Ext
15mm
15mm X 1/2" Ext
15mm X 1/4" Ext
Weight
kg
lb
1.2
2.6
1.6
3.6
N4686
H4459
N4769
N4312
N4581
N4343
H4301
L4653
F4896
H4236
F4895
Output
Flush Socket Head
F3834
15mm X 1/4" Ext/Retention Ring
15mm X 3/8" Ext
15mm/Retention Ring
16mm X 1/4" Ext
16mm X 1/4" Ext Surf Dr
16mm X 150mm Ext
17mm X 5mm Ext
5/16"/Retention Ring
7/16"
3/8" Surf Dr X 10mm Ext
1/2"
Note:
0408
13
Tool Configuration
L
STANLEY AIR TOOLS
MADE IN U.S.A.
H
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Flush Socket Head
A40LATPJM-10
975
17 - 33
12 - 24
17.5
0.69
40
1.56
429
16.9
2.5
5.4
F4901
A40LATPJM-6
600
27 - 54
20 - 40
17.5
0.69
40
1.56
455
17.9
2.7
5.9
Gearcase Extensions
A40LA Flush Socket Options
Add 4E to Model# 4" A40L_A
J4413 9/16" X 1/4" Ext
A6309 12mm X 3mm Ext Magnetic
N4268 14mm X 1/4" Ext
20D109900 5/16"
F4899 13mm
J4311 14mm X 16mm
L4653 5/16"/Retention Ring
L4543 13mm (1/2" Clearance)
F4900 15mm
Example: A40LATPM-6-4E
20D213501 3/8"
L4834 13mm Magnetic
A6115 15mm Magnetic 3/8" Ext
H4236 3/8" Surf X 10mm Ext
L4022 13mm Surface
J4684 15mm X 1/2" Ext
Other Options
F4896 7/16"
L4934 13mm Surface X 10mm Ext 20D213502 15mm X 1/2" Ext
F4895 1/2"
L4935 13mm Surface X 5mm Ext
L4378 15mm X 1/4" Ext
F4747 9/16"
J4444 13mm X 1" Ext
N4686 15mm X 1/4" Ext/Ret Ring
Mounting Options
F4894 5/8" (16mm)
H4921 13mm X 1/2" Ext
H4459 15mm X 3/8" Ext
J4354 Swivel Bail
F4897 10mm
L4435 13mm X 1/2" Ext
N4769 15mm/Retention Ring
A4590 Angle Head Reaction Bar J4979 10mm X 1" Ext
N4918 13mm X 1/4" Ext
N4312 16mm X 1/4" Ext
N4433 Angle Head Split
N4086 13mm X 1/8" Ext
N4581 16mm X 1/4" Ext Surface
Reaction Bar
H4494 13mm X 12mm Ext
F4898 11mm
20D118200 13mm X 23mm Ext Magnetic
A6192 17mm 20mm Ext
L4509 11mm X 5/8" Ext Mag
J4435 14mm
20D250702
L4006 12mm
20D213500 14mm
H4367 E8 Torx
L4839 12mm X 1/4" Ext
H4371 14mm Surface X 30mm Ext
Note:
14
0408
Tool Configuration
L
STANLEY AIR TOOLS
MADE IN U.S.A.
OFF
H
R
Rated
"R"
Speed
Torque Range
Side to Center
MODEL
Non-Reversible
RPM
Nm
lb ft
mm
in
A40LA2TPJM-5
475
34 - 68
25 - 50
22
0.87
A40LA2TPJM-4
320
51 - 102
38 - 75
22
0.87
A40LA2TPJM-3
255
63 - 126
47 - 93
22
0.87
Reversible
A40LRA2TPM-6
530
15.5 - 31
11.5 - 23
22
0.87
A40LRA2TPM-4
320
25 - 50
19 - 37
22
0.87
A40LRA2TPM-3
215
38 - 75
28 - 55
22
0.87
A40LRA2TPM-2
175
47 - 94
35 - 69
22
0.87
Gearcase Extensions
A40LA2 Flush Socket Options
A4824 1/2"
B4466 1/2" SD
B4427 1/2" X 5/16" Ext
A4543 9/16"
Mounting Options
A4542 5/8" See 16mm
J4354 Swivel Bail
A4538 3/4" See 19mm
A4680 11/16"
N4433 Angle Head Split Reaction Bar N4406 11/16" X 3/16" Ext
A4649 11/16" X 3/8" Ext
Other Options
N4470 10mm Fast Lead
B4153 13mm
L4881 13mm Magnetic
20D250708
N4336 13mm X 1/2" Ext
B4601 13mm X 3/8" Ext
"H"
Height
mm
in
51
2
51
2
51
2
"L"
Length
mm
in
480
18.9
480
18.9
48
18.9
Weight
kg
lb
3.3
7.3
3.3
7.3
3.3
7.3
51
51
51
51
455
480
480
480
3.1
3.3
3.3
3.3
J4461
F4456
F4731
L4146
B4152
F4144
L4230
H4802
B4555
F4655
F4476
H4720
B4042
A4542
2
2
2
2
17.9
18.9
18.9
18.9
13mm X 3/4" Ext
14mm
14mm Double Hex
14mm X 1/4" Ext
15mm
15mm Fast Lead
15mm X 1/8" Ext
15mm X 1/2" Ext
15mm X 3/8" Ext
15mm X 3/8" Ext Fast Lead
15mm X 3/4" Ext
15mm X 5/8" (15mm) Ext
15mm X 1" Ext
16mm (5/8")
L
STANLEY AIR TOOLS
H
N4801
J4945
B4681
J4609
H4061
H4545
N4878
J4229
B4405
L3308
H4235
N4790
F4589
J4832
A4538
L4670
N4540
F4006
A4650
L4423
6.8
7.3
7.3
7.3
Output
Flush Socket Head
F4807
F4812 (Reaction)
F4807
F4812 (Reaction)
16mm (5/8") Surf X 1/4" Ext
16mm (5/8") X 13mm Ext
17mm
17mm Fast Lead
17mm Surface Dr X 13mm Ext
17mm X 1/4" Ext
17mm X 4mm Ext
17mm X 5mm Ext
18mm
18mm Surface Dr
18mm Surface Dr X 1/2" Ext
18mm X 1/4" Ext
18mm X 1/2" Ext
18mm X 13/16" Ext
19mm (3/4")
19mm (3/4") X 1/4" Ext
19mm (3/4") X 15mm Ext
19mm (3/4") X 2.5mm Ext
19mm (3/4") X 3/8" Ext
19mm (3/4") X 5mm Ext
R
Rated
"R"
"H"
Speed
Torque Range
Side to Center
Height
MODEL
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
A40LA3TPJM-3
255
63 - 126
47 - 93
26
1.03
60
2.35
A40LA3TPJM-2
200
78 - 156
58 - 115
26
1.03
60
2.35
Reversible
A40LRA3TPM-1
130
63 - 126
47 - 93
26
1.03
60
2.35
Gearcase Extensions
40L_A3/40L_A4 Flush Socket Options
L4018 1/2 SD (Paint Mark)
F4514
A4552 7/8
N4999
A4551 3/4 (19mm)
L4671
J4323 3/4(19mm) X 30mm Ext
F4687
N4309 7/8" Fast Lead
J4973
Mounting Options
N4456 7/8" Surface
L4876
J4354 Swivel Bail
B4266 7/8 X 1/4 Ext
L4169
F4574 15mm
20D242900
L4560
N4434 Angle Head Split Reaction Bar H4553 15mm X 1/4 Ext
H4786 15mm X 1/4" Ext Fast Lead
F4384
Other Options
F4477
20D250704
"L"
Length
mm
in
480
18.9
480
18.9
Weight
kg
lb
3.6
8
3.6
8
480
3.6
18.9
17mm
A6111
17mm X 1/4" Ext
L4433
17mm X 1/2" Ext
J4495
18mm
20D242901
18mm X 10mm Ext J4948
18mm X 13mm Ext H4640
18mm X 7mm Ext
H4550
19mm X 3/4 Ext
F4385
21mm
H4702
8
Output
Flush Socket Head
F4808
F4813
Reaction
21mm Surface
21mm X 1" Ext
21mm X 1/2 Ext
21mm X 1/4" Ext
21mm X 2.5mm Ext
21mm X 4.6mm Ext
22mm Hex
22mm X 1/4 Ext Surface
22mm X 10mm Ext Surface
22mm X 3/4 Ext
Note:
0408
15
Tool Configuration
L
STANLEY AIR TOOLS
MADE IN U.S.A.
H
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Flush Socket Head
A40LA4TPJ-011
110
139 - 278
103 - 205
26
1.03
541
21.3
541
21.3
5
11
A5192
Reversible
A5195 Reaction
A40LRA4TP-008
75
103 - 205
75 - 150
26
1.03
546
21.5
546
21.5
4.7
10.4
Gearcase Extensions
Mounting Options
F4015 Swivel Bail
A4591 Angle Head Reaction Bar 20D250706
Other Options
H1141 Base Mount Bracket N4434 Angle Head Split
Reaction Bar
Flush Socket Options: (see 40L_A3/40L_A4 Flush Socket Options on p 15)
Rated
"R"
"H"
"L"
Speed
Side to Center
Height
Length
Torque Range
MODEL
mm
Non-Reversible
RPM
Nm
lb ft
in
mm
in
mm
A40LA5TPJ-011
110
140 - 280
103 - 205
32
1.25
71
2.8
554
21.8
A40LA5TPJ-006
60
225 - 450
165 - 330
32
1.25
71
2.8
554
21.8
Reversible
A40LRA5TP-008
60
103 - 205
75 - 150
32
1.25
71
2.8
554
21.8
Gearcase Extensions
Mounting Options
A40A5 Flush Socket Options
F4015 Swivel Bail
A5248 3/4" (19mm)
S5046 Base Mount Bracket A5479 3/4" (19mm) SD Female
A5082 Reaction Bar
A5112 7/8" (22mm)
Other Options
A5183 7/8" (22mm) Fast Lead
A5107 15/16" (24mm)
20D250706
A5113 1"
A5473 1" Fast Lead
A5114 1 - 1/16" (27mm)
A5651 18mm
A5175 21mm
Tool Configuration
See pp 24-27 for A40LA3H
Hold & Drive Options
5.6
A6234
A5107
A5380
A5438
A5261
A5129
A6428
A5114
A5238
A5574
Output
Flush Socket Head
A5193
A5194 Reaction
12.3
21mm x 1/2" Ext
24mm (15/16")
24mm (15/16") Fast Lead
24mm (15/16") Surface Drive
24mm (15/16") X 8mm Ext
24mm (15/16") X 15mm Ext
24mm X 1/1" Ext
27mm (1-1/16")
27mm (1-1/16") X 2.5mm Ext
27mm (1-1/16") X 20mm Ext
L
STANLEY AIR TOOLS
MADE IN U.S.A.
Hold and Drive
Angle Nutrunners
Air Actuated Shutoff
Weight
in
kg
5.2
12.3
5.2
12.3
H
R
Rated
"R"
"H"
Speed
Torque Range
Side to Center
Height
MODEL
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
A40LA3HTPJM-3
255
63 - 125
47 - 93
26
1.03
117
4.62
A40LA3HTPJM-2
200
78 - 155
58 - 115
26
1.03
117
4.62
Gearcase Extensions
A40L_A3H Output Options
Add 4E to Model# 4" A40L_A3H
H4974 1" Travel Bit Holder
H4975
H4969 1½" Travel Tang Holder
H4976
H4970 1½" Travel Bit Holder
H4971
Example: A40LA3HTPJM-3-4E
H4972
20D250704
"L"
Length
mm
in
480
18.9
480
18.9
Output
Weight
kg
lb
Standard
4.2
9.3
1" Tang
4.2
9.3
1" Tang
Mounting Options
2" Travel Tang Holder
J4354 Swivel Bail
2" Travel Bit Holder
3" Travel Tang Holder
3" Travel Bit Holder
N4434 Angle Head Split
Reaction Bar
Note:
16
0408
Tool Configuration
Select model and model options.
See p 29 for Standard Hex Socket Options
Contact Stanley for Special Socket Options.
Crowfoot Lever (1.4 to 30 Nm)
25.4 mm (1.0 in)
31.75 mm (1.25 in)
R
L
46 mm
(1.8 in)
46.2 mm
(1.82 in)
MODEL
R.P.M.
44.5 mm
(1.75 in)
50.6 mm
(1.99 in)
#8
T
T
# 69
Rated
Maximum
"R"
"T"
"L"
Speed
Hex Size
Torque Range
Side to Center
Thickness
Length
MODEL
Weight
Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
mm (in)
F30LR8TA-24
2400
1.4 - 2.7
1-2
12.7
0.5
16
0.64
284
11.2
1.3
2.8
F30LR8TA-16
1650
2-4
1.5 - 3
12.7
0.5
16
0.64
284
11.2
1.3
2.8
F30LR8TA-9
900
3.5 - 7
2.7 - 5.3 12.7
0.5
16
0.64
292
11.5
1.3
2.8
13 (1/2)
F30LR8TA-5
500
6.4 - 12.7 4.7 - 9.4 12.7
0.5
16
0.64
305
12
1.5
3.2
Non-Reversible
F30L69ATA-2
250
15 - 30
11 - 22
13.5
0.5
16
0.64
389
15.3
1.8
4
F30L69ATA-3
360
13 - 26
9.5 - 19
13.5
0.5
16
0.64
389
15.3
1.8
4
Gearcase Extensions
Mounting Options
Other Options
A3061 Vertical Bail
Add 4E to Model# 4" Ext
20D250723 L8
Exhaust Collector M3131
B3432 Swivel Bail
20D250721 L69
Add 10E to Model# 10" Ext for L8
Example: F30LR8TA-24-4E
Tubenut Lever (6.5 to 47 Nm)
F
OF
42 mm
(1.7 in)
L
R
L
55.9 mm
(2.2 in)
34 mm (1.34 in)
R
Rated
Speed
MODEL
RPM
F30L346ATA-24 325
F30L252TA-23
235
T
# 346
T
Torque Range
Nm
lb ft
12 - 24
9 - 18
12.5 - 25 9.5 - 19
MODEL
R.P.M.
44 mm
(1.75 in)
54 mm
(2.13 in)
42 mm
(1.7 in)
"R"
Side to Center
mm
in
8.6
0.34
13
0.52
"T"
Thickness
mm
in
14
0.54
14
0.51
# 252
"L"
Length
mm
in
356
14
348
13.7
Weight
kg
lb
2.1
4.6
2.1
4.6
Maximum Maximum
Hex Size Tube Size
mm (in)
mm (in)
13 (1/2)
8 (5/16)
42 mm (1.65 in)
54 mm (2.125 in)
R
L
81.7 mm
(3.2 mm)
34 mm (1.34 in)
MODEL
R.P.M.
54 mm
(2.13 in)
35.4 mm (1.4 in)
T
# 74
# 264
Rated
Speed
Maximum Maximum
"R"
"T"
"L"
Hex Size Tube Size
Torque Range
Side to Center
Thickness
Length
Weight
MODEL
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
mm (in)
mm (in)
F30L74ATA-60
600
6.5 - 13
5 - 9.5
18.5
0.73
14.5
0.57
384
15.1
2.2
4.8
F30L74ATA-41
415
9.5 - 19
7 - 14
18.5
0.73
14.5
0.57
384
15.1
2.2
4.8
18 (11/16) 11 (7/16)
F30L74ATA-31
305
12 - 24
9 - 18
18.5
0.73
14.5
0.57
384
15.1
2.2
4.8
F30L264TA-30
305
12 - 23
9 - 17
21.3
0.84
18
0.7
373
14.7
2.2
4.8
24 (15/16) 13 (1/2)
F30L264TA-17
165
16 - 32
12 - 24
21.3
0.84
18
0.7
373
14.7
2.2
4.8
F30L264TA-12
110
24 - 47
18 - 35
21.3
0.84
18
0.7
373
14.7
2.2
4.8
Mounting Options
Gearcase Extensions
Other Options
A3061 Vertical Bail
20D250724 L34620D250729 L74
M3131 Exhaust Collector
B3432 Swivel Bail
20D250726 L25220D250728 L264
Add 10E to Model# 10" Ext Example: F30L264TA-12-4E
0408
17
Straight Nutrunners - Clutch Shutoff
L
Tool Configuration
R
A32LB
Rated
"R"
"L"
Speed
Torque Range
Side to Center
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
kg
lb
Standard
A32LBCT-15
1660
5 - 9.5
3.5 - 7
23
0.91
344
13.6
1.55
3.4
3/8" SD
A32LBCT-10
785
7.5 - 15
5.5 - 11
23
0.91
344
13.6
1.55
3.4
3/8" SD
A32LBCT-6
710
12 - 23
8.5 - 17
23
0.91
344
13.6
1.55
3.4
3/8" SD
Reversible
A32LRBCT-13
1450
4.5 - 9
3.3 - 6.5
23
0.91
344
13.6
1.55
3.4
3/8" SD
A32LRBCT-9
710
7 - 13.5
5 - 10
23
0.91
344
13.6
1.55
3.4
3/8" SD
A32LRBCT-6
620
11 - 21.5
8 - 16
23
0.91
344
13.6
1.55
3.4
3/8" SD
Mounting Options
Other Options
F3698 Aluminum Torque Bar
A8500 Swivel Bail (2 pc assembly)
A8362 Side Exhaust Deflector
A8606 Base Mount Bracket
A8011 Remote Exhaust Hose Adapter
20K100100 Steel Torque Bar
L
R
A33LB2
Rated
Torque
Side to
Speed
Range
Center
MODEL
Reversible
RPM
Nm
lb ft
mm
in
A33LRB2CT-6
650
15 - 30
11 - 22
23
0.91
A33LRB2CT-5
540
18 - 36
14 - 27
23
0.91
A33LRB2CT-3
350
24 - 48
18 - 35
23
0.91
A4517 Aluminum Torque Bar 20D117800 3/8” SD Anti Vibration
Other Options
A4078 3/8" SD X 1/2" Ext
L4933 3/8" SD X 13-1/2" Ext
A8011 Remote Exhaust
A4077 3/8" SD X 2-1/2" Ext
Hose Adapter
A4263 3/8" SD X 5-1/2" Ext
Mounting Options
A8500 Swivel Bail (2 pc assembly) J4380 Ext Torque Bar
"L"
Length
mm
431
431
431
H4931
J4247
A4263/1
B4649
A4498
A4865
in
17
17
17
Weight
kg
2.1
2.1
2.1
3/8"-24 Threaded
3/8"-24 Thread X 4" Ext
3/8"-24 Thr'd X 5-1/2" Ext
3/8"-24 Thr'd X 6" Ext
1/2" SD X 1-1/8" Ext
1/2" SD X 1-1/2" Ext
lb
4.7
4.7
4.7
H4099
A4775
A4641
A4642
A4079
H4098
M4430
Output
Standard
3/8" SD
3/8" SD
3/8" SD
1/2" SD X 12-1/2" Ext
1/2" SD X 2-1/2" Ext
1/2" SD X 4" Ext
1/2" SD X 6" Ext
1/2" SD X 8-1/2" Ext
1/2" SD X 9-1/2" Ext
1/2"-20 Threaded
Note:
Performance specifications @ 620 Pa (90 psi). Air Inlet 1/4” NPT (1/4” ISO Inlet Option), Air Consumption: A32 10 l/s (20 ft3/m), A33 15 l/s (32 ft3/m)
18
0408
Angle Nutrunners - Clutch Shutoff
L
OFF
AIR TOOLS
Tool Configuration
H
R
A32LRAA
Rated
"R"
Speed
Torque Range
Side to Center
MODEL
Reversible
RPM
Nm
lb ft
mm
in
A32LRAACT-11S3 1050
3-6
2 - 4.3
13
0.5
A32LRAACT-11S2 1050
4.5 - 9
3.5 - 6.5
13
0.5
A32LRAACT-7S2
700
6 - 12
4.5 - 8.6
13
0.5
A32LRAACT-5S3
525
3-6
2 - 4.3
13
0.5
A32LRAACT-5S2
525
6 - 12
4.5 - 8.6
13
0.5
A32LRAACT-5S1
525
7.5 - 15
5.5 - 11
13
0.5
Gearcase Extensions
A32L_AA Output Options
*A8699 3/8” Double Ended SD
A8553 1/4” SD
Example: A32LRAACT-11S3-4E
A8698 1/4” Female Hex Mag
"H"
"L"
Height
Length
Output
Weight
mm
in
mm
in
kg
lb
Standard
34
1.32
325
12.8
1.4
3
3/8" SD
34
1.32
325
12.8
1.4
3
3/8" SD
34
1.32
325
12.8
1.4
3
3/8" SD
34
1.32
325
12.8
1.4
3
3/8" SD
34
1.32
325
12.8
1.4
3
3/8" SD
34
1.32
325
12.8
1.4
3
3/8" SD
Mounting Options
20D250705
A8576 Swivel Bail
Other Options
L
S TA N LEY A IR TO O LS
M A D E IN U.S.A .
H
A32L_A
R
Rated
"R"
"H"
"L"
Speed
Length
Torque Range
Side to Center
Height
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Standard
A32LA1CT-10
965
7 - 14
5 - 10
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LA1CT-7
750
10 - 20
7.5 - 15
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LA1CT-6
600
13 - 25
10 - 19
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LA1CT-5
500
15 - 30
11 - 22
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LA2ACT-4
360
20 - 40
15 - 29
17.5
0.69
40
1.56
386
15.2
1.8
4
3/8" SD
Reversible
A32LRA1CT-9
900
6.5 - 12.5
5 - 9.5
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LRA1CT-7
665
8.5 - 17
6.5 - 13
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LRA1CT-5
525
10 - 19
7 - 14
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LRA1CT-4
445
13 - 25
9 - 18
14
0.55
35
1.38
340
13.4
1.55
3.4
3/8" SD
A32LRA2ACT-3
320
19 - 38
14 - 28
17.5
0.69
40
1.56
386
15.2
1.8
4
3/8" SD
Gearcase Extensions
A32/33L_A1 Flush Socket Options
A32/33L_A2A Output Options
F3832 1/4"internal Hex
F3973 3/8" SDPaint Mark
20D122801 Flush Socket Head
A32/33L_A1 Flush Sockets
F3829 3/8"-24 Threaded Female
20D255500 12mm Surface Drive
Example: A32LRA1CT-9-4E
F3825 3/8" SD
w/1/2" Socket Adapter
20D255501 13mm Surface Drive
Other Options
Mounting Options
A8500 Swivel Bail
20D250701 A3_A1 20D250702 A30_LA2A
Note:
0408
19
Angle Nutrunners - Clutch Shutoff
L
M A D E IN U.S.A .
H
Tool Configuration
A33LA
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Standard
A33LA1ACT-8
825
15 - 30
11 - 22
14
0.55
35
1.38
417
16.4
2
4.4
3/8" SD
A33LA2ACT-6
600
21 - 42
16 - 31
17.5
0.69
40
1.56
432
17
2.1
4.7
3/8" SD
A33LA2ACT-5
500
25 - 50
19 - 37
17.5
0.69
40
1.56
432
17
2.1
4.7
3/8" SD
A33LA2ACT-4
435
30 - 59
22 - 44
17.5
0.69
40
1.56
432
17
2.1
4.7
3/8" SD
A33LA3CT-3
335
38 - 75
28 - 55
22
0.87
50
1.95
457
18
2.7
5.9
1/2" SD
A33LA3CT-2
250
45 - 90
33 - 66
22
0.87
50
1.95
457
18
2.7
5.9
1/2" SD
Reversible
A33LRA1ACT-7
700
13 - 26
10 - 19
14
0.55
35
1.38
417
16.4
2
4.4
3/8" SD
A33LRA2ACT-5
510
18 - 36
14 - 27
17.5
0.69
40
1.56
432
17
2.1
4.7
3/8" SD
A33LRA2ACT-4
400
23 - 46
17 - 34
17.5
0.69
40
1.56
432
17
2.1
4.7
3/8" SD
A33LRA2ACT-3
335
28 - 55
21 - 41
17.5
0.69
40
1.56
432
17
2.1
4.7
3/8" SD
A33LRA3CT-2
270
34 - 68
25 - 50
22
0.87
50
1.95
457
18
2.7
5.9
1/2" SD
A33LRA3CT-1
200
43 - 85
32 - 63
22
0.87
50
1.95
457
18
2.17
5.9
1/2" SD
Gearcase Extensions
A32/33L_A2A Output Options
Mounting Options
Add 4E to Model# 4" A/A2A/A3 Models
F3973 3/8" SD Paint Mark
A8500 Swivel Bail
H1203 Base Mount Bracket (33A3)
Add 8E to Model# 8" A3 Models
F3829 3/8"-24 Thrd Female/1/2"
A4590 Angle Head Reaction Bar (33A3)
Add 10E to Model# 10" A2A/A3 Models
F3825 3/8" SD
Soc Adapter
(33A3)
20D250701 A3_A1
20D250702 A3_LA2A
M4310 1/2 X 2" Ext Retract Spin Reaction A4255 1/2"-20 Threaded Female Screwin Flush Socket
20D250703 A3_A3
L4632 1/2" Double SD w/Reaction
B4756 1/2"-20 Female/Reaction Screw-In Flush Socket
Other Options
A4257 1/2"-20 Threaded Male
L4040 Paint Mark Device w/Reaction
L
H
A33LA4
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Non-Reversible
RPM
Nm
Lb ft
mm
in
mm
in
mm
in
A33LA4CT-015
150
75 - 150
55 - 110
26
1.03
60
2.35
488
19.2
Reversible
A33LRA4CT-012
120
68 - 135
50 - 100
26
1.03
60
2.35
488
19.2
Gearcase Extentions
Mounting Options
A8500 Swivel Bail
F4811 1/2"-20 Threaded Keyed H1141 Base Mount Bracket
F4806 5/8" SD
20D250704
Weight
kg
3.4
lb
7.5
Output
Standard
1/2" SD
3.4
7.5
1/2" SD
Other Options
Note:
20
0408
Flush Angle Nutrunners - Clutch Shutoff
L
OFF
AIR TOOLS
Tool Configuration
H
R
A32LRAA
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Flush Head
A32LRAACT-11S3 1050
3-6
2 - 4.3
13
0.5
34
1.32
325
12.8
1.4
3
A32LRAACT-11S2 1050
4.5 - 9
3.5 - 6.5
13
0.5
34
1.32
325
12.8
1.4
3
A32LRAACT-7S2
700
6 - 12
4.5 - 8.6
13
0.5
34
1.32
325
12.8
1.4
3
A8618
A32LRAACT-5S3
525
3-6
2 - 4.3
13
0.5
34
1.32
325
12.8
1.4
3
A32LRAACT-5S2
525
6 - 12
4.5 - 8.6
13
0.5
34
1.32
325
12.8
1.4
3
A32LRAACT-5S1
525
7.5 - 15
5.5 - 11
13
0.5
34
1.32
325
12.8
1.4
3
Gearcase Extensions
A30_LA Flush Socket Options
J3823 5/16" Magnet.
B3686 7mm
B3754 10mm
B3752 5/16" (8mm)
B3752 8mm (5/16")
F3667 10mm X 1/4" Ext Magnetic
Example: A32LRAACT-11S3-4E
B3751 1/4"
J3041 8mm X 1/4" Ext
J3100 10mm X 1/2" Ext Magnetic
B3753 3/8"
J3706 8mm X 1/16" Ext Mag L3073 10mm X 1/4" Ext Magnetic
20D250705
B3834 4mm
L3154 8mm Double Hex
F3587 11mm
Mounting Options
Other Options
A8576 Swivel Bail
L
M A D E IN U.S.A .
H
A32L_A
R
Rated
"R"
"H"
Speed
Torque Range
Side to Center
Height
MODEL
Non-Reversible
RPM
Nm
lb ft
mm
in
mm
in
A32LA2ACT-4
360
20 - 40 15 - 29
17.5
0.69
40
1.56
A33LA2ACT-6
600
21 - 42 16 - 31
17.5
0.69
40
1.56
A33LA2ACT-5
500
25 - 50 19 - 37
17.5
0.69
40
1.56
A33LA2ACT-4
435
30 - 59 22 - 44
17.5
0.69
40
1.56
Reversible
A32LRA2ACT-3
320
19 - 38 14 - 28
17.5
0.69
40
1.56
A33LRA2ACT-5
510
18 - 36 14 - 27
17.5
0.69
40
1.56
A33LRA2ACT-4
400
23 - 46 17 - 34
17.5
0.69
40
1.56
A33LRA2ACT-3
335
28 - 55 21 - 41
17.5
0.69
40
1.56
Gearcase Extensions
30A2A Flush Socket Options
F4897 10mm
L4935
J4979 10mm X 1" Ext
J4444
H4921
Example: A32LRA2ACT-4-4E
N4918
F4898 11mm
N4086
20D250702 A3_LA2A
L4509 11mm X 5/8" Ext Mag H4494
Mounting Options
L4006 12mm
J4435
A8500 Swivel Bail
F4899 13mm
H4371
Other Options
L4543 13mm (1/2" Clearance) N4268
L4834 13mm Magnetic
F4900
A8011 Remote Exhaust Hose Adapter L4022 13mm Surface Dr
J4684
L4934 13mm Surf X 10mm Ext L4378
"L"
Length
mm
386
432
432
432
in
15.2
17
17
17
Weight
kg
lb
1.8
4
2.1
4.7
2.1
4.7
2.1
4.7
386
432
432
432
15.2
17
17
17
1.8
2.1
2.1
2.1
13mm Surf X 5mm Ext
13mm X 1" Ext
13mm X 1/2" Ext
13mm X 1/4" Ext
13mm X 1/8" Ext
13mm X 12mm Ext
14mm
14mm Surf X 30mm Ext
14mm X 1/4" Ext
15mm
15mm X 1/2" Ext
15mm X 1/4" Ext
N4686
H4459
N4769
N4312
N4581
N4343
H4301
L4653
F4896
H4236
F4895
Output
Flush Head
4
4.7
4.7
4.7
F3834
F3834
15mm X 1/4" Ext/Retention Ring
15mm X 3/8" Ext
15mm/Retention Ring
16mm X 1/4" Ext
16mm X 1/4" Ext Surface Dr
16mm X 150mm Ext
17mm X 5mm Ext
5/16"/Retention Ring
7/16"
3/8" Surface Dr X 10mm Ext
1/2"
Note:
0408
21
Flush Angle Nutrunners - Clutch Shutoff
L
Tool Configuration
M A D E IN U.S.A .
H
R
Rated
"R"
Speed
Torque Range
Side to Center
MODEL
Non-Reversible
RPM
Nm
lb ft
mm
in
A33LA3CT-3
335
38 - 75
28 - 55
22
0.87
A33LA3CT-2
250
45 - 90
33 - 66
22
0.87
Reversible
A33LRA3CT-2
270
34 - 68
25 - 50
22
0.87
A33LRA3CT-1
200
43 - 85
32 - 63
22
0.87
Gearcase Extensions
A33L_A3 Flush Socket Options
A4824 1/2"
B4466 1/2" SD
B4427 1/2" X 5/16" Ext
Example: A32LRA3-2-4E
A4543 9/16"
A4542 5/8" (16mm) See 16mm
A4538 3/4" (19mm) See 19mm
20D250703 A3_A3
A4680 11/16"
Other Options
N4406 11/16" X 3/16" Ext
A4649 11/16" X 3/8" Ext
A8011 Remote Exhaust
N4470 10mm Fast Lead
Hose Adapter
B4153 13mm
Mounting Options
L4881 13mm Magnetic
N4336 13mm X 1/2" Ext
B4601 13mm X 3/8" Ext
N4433 Angle Head Split Reaction Bar J4461 13mm X 3/4" Ext
F4456 14mm
"H"
Height
"L"
Length
mm
50
50
in
1.95
1.95
mm
457
457
in
18
18
Weight
kg
lb
2.7
5.9
2.7
5.9
50
50
1.95
1.95
457
457
18
18
2.7
2.17
F4731
L4146
B4152
F4144
L4230
H4802
B4555
F4655
F4476
H4720
B4042
A4542
N4801
J4945
B4681
J4609
14mm Double Hex
14mm X 1/4" Ext
15mm
15mm Fast Lead
15mm X 1/8" Ext
15mm X 1/2" Ext
15mm X 3/8" Ext
15mm X 3/8" Ext Fast Lead
15mm X 3/4" Ext
15mm X 5/8" (15mm) Ext
15mm X 1" Ext
16mm (5/8")
16mm (5/8") Surf X 1/4" Ext
16mm (5/8") X 13mm Ext
17mm
17mm Fast Lead
H4061
H4545
N4878
J4229
B4405
L3308
H4235
N4790
F4589
J4832
A4538
L4670
N4540
F4006
A4650
L4423
5.9
5.9
Output
Flush Head
A4539
B4477
(Reaction)
17mm Surf X 13mm Ext
17mm X 1/4" Ext
17mm X 4mm Ext
17mm X 5mm Ext
18mm
18mm Surface Dr
18mm Surf X 1/2" Ext
18mm X 1/4" Ext
18mm X 1/2" Ext
18mm X 13/16" Ext
19mm (3/4")
19mm (3/4") X 1/4" Ext
19mm (3/4") X 15mm Ext
19mm (3/4") X 2.5mm Ext
19mm (3/4") X 3/8" Ext
19mm (3/4") X 5mm Ext
L
H
A33LA4
R
Rated
Speed
Torque Range
MODEL
Non-Reversible
RPM
Nm
Lb ft
A33LA4CT-015
150
75 - 150
55 - 110
Reversible
A33LRA4CT-012
120
68 - 135
50 - 100
Gearcase Extensions
Mounting Options
A8500 Swivel Bail
20D250704
"R"
Side to Center
mm
in
26
1.03
"H"
Height
mm
60
"L"
Length
in
2.35
mm
488
in
19.2
Weight
kg
lb
3.4
7.5
26
1.03
60
2.35
488
19.2
3.4
7.5
A33L_A4 Flush Socket Options
L4018 1/2 SD (Paint Mark)
F4514 17mm
A6111
A4552 7/8
N4999 17mm X 1/4" Ext
L4433
A4551 3/4 (19mm)
L4671 17mm X 1/2" Ext
J4495
J4323 3/4(19mm) X 30mm Ext
F4687 18mm
20D242901
N4309 7/8" Fast Lead
J4973 18mm X 10mm Ext
J4948
N4456 7/8" Surface
L4876 18mm X 13mm Ext
H4640
B4266 7/8 X 1/4 Ext
H4502
F4574 15mm
20D242900 18mm X 7mm Ext
H4550
H4553 15mm X 1/4 Ext
H4703
H4786 15mm X 1/4" Ext Fast Lead
F4384 19mm X 3/4 Ext
F4385
Output
Flush Head
F4808
F4813 (Reaction)
21mm Surface
21mm X 1" Ext
21mm X 1/2 Ext
21mm X 1/4" Ext
21mm X 2.5mm Ext
21mm X 4.6mm Ext
22mm Hex
22mm X 10mm Ext Surf
22mm X 3/4 Ext
Note:
22
0408
Hold and Drive Angle Nutrunners - Clutch Shutoff
L
M A D E IN U.S.A .
H
Tool Configuration
See pp 24-26 for Hold & Drive Options
A33LA3HCT
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Output
Weight
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
mm
in
kg
lb
Standard
A33LA3HCT-6
600
18 - 35 13 - 26
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
A33LA3HCT-4
395
30 - 60 22 - 44
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
A33LA3HCT-3
320
36 - 71 26 - 52
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
A33LA3HCT-2
235
43 - 85 32 - 63
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
Reversible
A33LRA3HCT-5
500
15 - 30 11 - 22
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
A33LRA3HCT-3
310
28 - 55 21 - 41
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
A33LRA3HCT-2
255
33 - 65 24 - 48
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
A33LRA3HCT-1
190
40 - 80 30 - 59
22
0.87
118
4.65
460
18.1
3
6.6
1" Tang
A33L_A3H Output Options Other Options
Mounting Options
Gearcase Extensions
N4608 1" Travel Bit Holder
A8500 Swivel Bail
H4871 1½" Travel Bit Holder A8011 Remote Exhaust Hose Adapter
H4872 1½" Travel Tang Holder
Example: A33LA3HCT-2-4E
N4609 2" Travel Tang Holder
N4610 2" Travel Bit Holder Vinyl Head Cover Option 20D250703
L
H
A33L43HCT
R
Rated
"R"
"H"
"L"
Speed
Torque Range
Side to Center
Height
Length
MODEL
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
mm
in
A33LA4HCT-015
150
68 - 135 50 - 100
26
1.03
117
4.62
460
18.1
Reversible
A33LRA4HCT-012 120
60 - 120 44 - 88
26
1.03
117
4.62
460
18.1
Gearcase Extensions
A33L_A4H Output Options Mounting Options
A8500 Swivel Bail
H4969 1½" Travel Tang HolderH1141 Base Mount Bracket
H4970 1½" Travel Bit Holder A4591 Angle Head Reaction Bar
Example: A33LRA4HCT-012-4E
H4975 2" Travel Tang Holder N4434 Angle Head Split Reaction Bar
20D250704
H4971 3" Travel Tang Holder
Weight
kg
lb
3.9
8.5
Output
Standard
1" Tang
3.9
8.5
1" Tang
Other Options
Note:
0408
23
Hold and Drive 33LA3H & 33LA4H/40LA3H Tang Holder Options
Select a Tang Holder for 3LA3H & 3LA4H/4LA3H Models
NOTE: Minimum socket size for each holder.
See p 26 for 3LA3H & 3LA4H/4LA3H Sockets.
See p 34 to select Cables and Controllers.
33LA3H & 33LA4H/40LA3H Hex Tang Holders [Minimum Socket size]
L4106 11/32" [17mm, 11/16"]
20D214301 8mm Surface [17mm, 11/16"]
N4927 11/32" X 1-1/2 Ext [17mm,11/16"]
H4372 8mm X 1" Ext [17mm, 11/16"]
H4210 0.340" [17mm, 11/16"]
H4888 8mm X 8" Ext [17mm, 11/16"]
L4373 3/8" [17mm, 11/16"]
J4382 8mm X 10mm Ext [17mm, 11/16"]
N4758 5mm [14mm, 9/16"]
L4848 8mm X 19mm Ext [17mm, 11/16"]
20D242700 5mm X 6.33mm [12.5mm, 1/2"]
L4784 8mm X 80mm Ext [17mm, 11/16"]
N4192 6mm [14mm, 9/16"]
F4636 8.5mm [17mm, 11/16"]
J4586 7mm [12mm, 1/2"]
L4005 9mm [17mm, 11/16"]
20D246900 7mm Surface [14mm 9/16"]
L4694 9mm Surface Drive [17mm, 11/16"]
H4161 7mm X 1" Ext [12.5mm, 1/2"]
H4499 9mm X 46mm Ext [17mm, 11/16"]
A6003 7mm X 6" Ext [12.5mm, 1/2"]
F4406 10mm [17mm, 11/16"]
J4456 8mm [14mm, 9/16"]
H4877 10mm Fast Lead [17mm, 11/16"]
F4573 8mm (5/16) [17mm, 11/16"]
20D222700 10mm X 6" Ext [17mm, 11/16"]
33LA3H & 33LA4H/40LA3H Rectangular Tang Holders [Minimum Socket size]
J4178 1/4" X 5/16" [14mm 9/16"]
L4978 6.3mm X 9.8mm [14mm, 17/32"]
N4826 1/4" X 7/16" [15mm 19/32"]
N4834 6.3 X 9.8 X 37mm Ext [14mm,17/32"]
F4673 .390" X .529" [17mm 11/16"]
F4718 6.35mm X 8mm [15mm, 19/32"]
H4475 4mm X 6mm [12mm 1/2"]
J4214 6.3 X 8mm X 1/2" Ext [15mm, 19/32"]
A6005 4.4mm X 8mm [17mm 11/16"]
H4883 6.3 X 8mm X 3/8" Ext [15mm, 19/32"]
H4857 5mm X 7.5mm [12mm 1/2"]
H4858 6.35mm X 8.12mm [16mm, 5/8"]
F4544 5mm X 8mm [17mm 11/16"]
20D215400 6.4mm X 8.4mm [17mm, 11/16"]
L4019 5mm X 8mm [4mm 7/32"]
F4870 6.7mm X 7mm [17mm, 11/16"]
H4607 5.6mm X 9.8mm [14mm 9/16"]
H4725 6.8mm X 8.25mm [17mm, 11/16"]
F4572 5.7mm X 8mm [12mm, 1/2"]
N4587 7.2 X 9.2 X 80mm Ext [15mm, 19/32"]
H4840 5.7mm X 8mm [17mm, 11/16"]
N4658 7.2mm X 9.2mm [15mm, 19/32"]
J4830 5.7 X 8 X 1" Ext [15mm, 19/32"]
F4975 7.2mm X 10.2mm [17mm, 11/16"]
H4606 5.7 X 8 X 5mm Ext [12mm, 1/2"]
H4064 7.2 X 10.2 X 30mm Ext [16mm,5/8"]
N4400 5.7 X 8 X 87mm Ext [15mm, 19/32"]
H4829 7.3mm X 9.4mm [17mm, 11/16"]
L4524 5.77mm X 8mm [15mm, 19/32"]
N4995 7.3 X 10 X 152mm Ext [17mm, 11/16"]
H4676 5.9mm X 6.8mm [15mm, 9/16"]
N4133 7.6 X 10 x32mm Ext [17mm, 11/16"]
F4596 5.9mm X 8.1mm [12mm, 1/2"]
N4994 7.6 X 10 x 152mm Ext [17mm,11/16"]
H4748 6 & 7 X 8.25mm Ext 2 Step [16mm, 5/8"]
N4033 7.6 X 10 X 75mm Ext [17mm,11/16"]
L4544 6mm X 7.72mm [12mm, 1/2"]
N4699 7.6 X 10 X 102mm Ext [12mm,1/2"]
N4716 6mm X 80mm Ext [14mm, 9/16"]
N4697 7.6 X 10 X 182mm Ext [12mm,1/2"]
N4666 6mm X 8mm [15mm, 9/16"]
F4287 7.7mm X 9.8mm [17mm, 11/16"]
L4644 6mm X 8mm [17mm, 11/16"]
F4542 7.7 X 9.8 X 16mm Ext [17mm,11/16"]
H4577 6mm X 8mm X 43mm Ext [16mm, 5/8"]
N4621 7.7 X 9.8 X 30mm Ext [16mm,5/8"]
H4593 6mm X 8mm X 47mm Ext [16mm, 5/8"]
J4315 7.7 X 9.8mm X 80mm [17mm,11/16"]
H4209 6mm X 10mm [16mm, 5/8"]
J4317 7.7 X 9.8 X 157mm [17mm,11/16"]
L4017 6mm X 10mm [17mm, 11/16"]
N4921 7mm X 10mm [17mm, 11/16"]
N4484 6mm X 13mm [16mm, 5/8"]
H4761 7mm X 11mm [17mm, 11/16"]
A6136 6.24mm X 7.5mm [17mm, 11/16"]
H4488 8 X 10 X 10mm Ext [17mm, 11/16"]
J4877 6.3mm X 7.5mm [17mm, 11/16"]
H4958 8 X 10mm X 1-1/8" Ext [17mm,11/16"]
N4413 6.3 X 8.0 X 32mm Ext [15mm, 19/32"]
H4904 8 X 10.5mm X 8" Ext [17mm, 11/16"]
H4489 6.3 X 8.7 X 80mm Ext [17mm,11/16"]
J4785 8mm X 11mm [17mm, 11/16"]
J4707 6.3mm X 9mm [17mm, 11/16"]
H4176 8mm X 11mm/Lead [17mm, 11/16"]
H4115 6.3mm X 9.3mm [17mm, 11/16"]
N4483 8mm X 12mm [19mm, 3/4"]
33LA3H & 33LA4H/40LA3H Special Tang Holders [Minimum Socket size]
H4748 6 & 7 X 8.25mm Ext 2-Step [16mm, 5/8"]
A6226 8mm Sq X 47mm Ext [17mm,11/16"]
H4191 8mm Square [17mm, 11/16"]
20D226200 E8 Torx [17mm, 11/16"]
24
J4043
N4189
F4600
H4960
A6233
N4575
N4712
H4906
L4803
20D214300
20S200602
H4874
N4064
10mm Left Hd Fast L [17mm, 11/16"]
10mm X 1.531" Ext [17mm, 11/16"]
10mm X 13mm [19mm, 3/4"]
10mm X 32mm Ext [17mm, 11/16"]
10mm X 75mm Ext [17mm, 11/16"]
10mm X 1/4" Ext [17mm, 11/16"]
10mm X 3-1/8" Ext [17mm, 11/16"]
10.2mm X 11.5mm [19mm, 3/4"]
11mm [17mm, 11/16"]
11mm Surface [17mm, 11/16"]
11.28 Double Hex Tang Holder
12mm [19mm, 3/4"]
14mm Double End [16mm, 5/8"]
N4749
N4752
L4117
L4869
J4302
J4296
H4905
20D226100
J4990
N4747
H4578
N4031
N4130
N4132
N4030
N4131
N4384
N4187
N4029
N4032
N4748
L4738
H4448
N4467
H4485
N4469
H4819
L4523
H4484
N4151
H4483
L4732
H4889
J4314
8 X 10 X 80mm Ext (0.7 OD) [18,11/16"]
8 X 10 X 157mm Ext (0.7 OD) [18,11/16"]
8.2mm X 9.8mm [17mm, 11/16"]
8.2 X 9.8 X 80mm Ext [17mm,11/16"]
8.5mm X 10.5mm [17mm, 11/16"]
8.5 X 10.5 X 16mm [17mm, 11/16"]
8.7mm X 11mm X Std Ext [19mm, 3/4"]
8.8mm X 9.8mm [17mm, 11/16"]
8.9mm X 11.2mm X 80mm [19mm, 3/4"]
9 X 11.5 X 80mm Ext [19mm,3/4"]
9mm X 11mm [19mm, 3/4"]
9mm X 12.5mm [19mm, 3/4"]
9 X 12.5mm x 32mm Ext [19mm, 3/4"]
9 X 12.5mm X 102mm Ext [19mm, 3/4"]
9 X 12.5mm X 145mm Ext [19mm, 3/4"]
9 X 12.5mm X 27mm Ext [19mm, 3/4"]
9 X 12.5mm X 52mm Ext [19mm, 3/4"]
9 X 12.5mm X 62mm Ext [19mm, 3/4"]
9 X 12.5mm X 70mm Ext [19mm, 3/4"]
9 X 12.5mmX 75mm Ext [19mm, 3/4"]
9 X 12.6mm X 157mm Ext [19mm, 3/4"]
9.2 X 12.5 [19mm, 3/4"]
9.2 X 12.5 [19mm, 3/4"]
9.2 X 12.5 X 8.5mm Ext [19mm, 3/4"]
9.2 X 12.5 X 10mm Ext [19mm, 3/4"]
9.2 X 12.5 X 26.5mm Ext [18mm, 11/16"]
9.2 X 12.5 X 45mm Ext [19mm, 3/4"]
9.2 X 12.5 X 80mm Ext [19mm, 3/4"]
9.2 X 12.5 X 155mm Ext [19mm, 3/4"]
9.2 X 12.5 X 157mm Ext [19mm, 3/4"]
9.2 X 12.5 X 182mm Ext [19mm, 3/4"]
9.2 X 12.5 X 300mm Ext [19mm, 3/4"]
9.4mm X 11.3mm X [19mm, 3/4"]
9.75mm X 12mm [19mm, 3/4"]
R8461. E12 Torx [17mm, 11/16"]
H4373 E14 Torx [17mm, 11/16"]
0807
Hold and Drive Options
A Tang holds the bolt while
the nut is tightened
A Bit holds the bolt while
the nut is tightened
Typical Tang
Options
Typical Bit
Options
NOTE: The bolt can extend beyond
the nut no more than the specified
Travel distance when tightened.
Female Torx
Male Hex
Reach
Reach
Travel
Female Hex
Bolt/Tang
Nut
Rectangular
Travel
Tang holder
Bit holder
Bolt
Nut
Minimum
Socket Size to
clear holder
Male Torx
Minimum
Socket Size to
clear header
Bit
Select a Bit Holder for 33LA3H or 33LA4H/40LA3H Models
Select a 1/4” or 5/16” Bit Holder.
NOTE: Minimum socket size for each holder.
See p 26 for 33LA3H or 33LA4H/40LA3H Sockets.
Hold and Drive 33LA3H & 33LA4H/40LA3H Bit and Holder Options
33LA3H & 33LA4H/40LA3H 5/16" Bit Holders [Minimum Socket size]
S7750 5/16" Hex [14mm 9/16"]
H4897 5/16" Hex X 60mm Ext [17mm 11/16"]
A6193 5/16" Hex [16mm 5/8"]
N4670 5/16" Hex X 80mm Ext [17mm 11/16"]
F4288 5/16" Hex [ 17mm 11/16"]
20D226900 5/16" X 1" Ext [17mm 11/16"]
A6183 5/16" Hex X 1/4" Ext [17mm 11/16"]
20D233100 5/16" X 3" Ext [17mm 11/16"]
N4631 5/16" Hex X 31mm Ext [17mm 11/16"] 20D247200 5/16" X 175mm Ext [17mm 11/16"]
33LA3H & 33LA4H/40LA3H 1/4" Bit Holders [Min Socket size]
20D215200 1/4" Hex [12mm 7/16"]
F4360 1/4" Hex [13mm (½")]
A6181 1/4" Hex X 1/4" Ext [12mm 7/16"]
A6182 1/4" Hex X 1/4" Ext [13mm 1/2"]
A6452 1/4" Hex, 1 5/8" [12mm 7/16"]
1/4" Bits
A6178
A6179
A6453
N4451
H4533
L4898
F4361
H4909
N4991
H4436
H4280
A6134
20D240600
0807
5/32" Hex
3/16" Hex
1/4" Hex
5/16" Hex
5/16" Screw
4mm Hex
5mm Hex
7mm Hex
8mm Hex
Blade (1/4" X 0.038")
T15 Torx
T27 Torx
T45 Torx
5/16" Bits
A6180
A5668
20D246700
A5666
J4850
F4866
F4380
F4399
A6206
7/32" Hex
1/4" Hex
5/16" Slotted Hex
3/8" Hex
7/8" Hex
#2 Blade
5mm Hex
6mm Hex
6mm Square
A6207
F4296
F4513
H4223
L4259
A6341
X4198
A6373
A6403
6mm X 5mm Rectangular
7mm Hex
8mm Hex
9mm Hex
10mm Hex
T30 Hex
T30 Torx
T40 Torx
T50 Torx
25
Hold and Drive 33LA3H & 33LA4H/40LA3H Socket Options
33LA3H Hex Sockets 30mm OD (1.2")
A6185 1/2"
H4747 14mm
N4617 5/8" (16mm)
A6451 14mm X 1 Ext
N4620 5/8" (16mm) X 30mm Ext 20D215100 14mm X 2-5/8" Ext
A6184 7/16"
N4665 15mm
N4746 3/4" (19mm)
H4597 15mm X 1/2"/Access Hole
N4884 9/16"
A6282 15mm X 1.0" Ext
A6186 7/8" (22mm)
A6002 15mm X 6" Ext
H4600 7/8" (22mm) X 1-1/8" Ext
N4617 16mm (5/8")
20D235100 11/16"
N4620 16mm (5/8") X 30mm Ext
20S202000 1"
20D245500 16mm Hex X 60mm Ext
20D245501
H4270
N4619
20D227000
N4746
N4793
20D222600
H4600
A6261
20D222903
16mm X 200mm Ext
17mm
18mm
18mm X 1" Ext
19mm (3/4")
21mm
21mm X 6.00" Ext
22mm (7/8") X 1-1/8" Ext
24mm
24mm X 1/2" Ext
33LA3H Hex Surface Sockets 30mm OD (1.2")
H4435 13mm
A6200 15mm
N4750 17mm
H4651 17mm X 1-1/8" Ext
H4036 18mm
20D233000 18mm X 3" Ext
H4038 18 X 18 Dp X 42mm Ext
H4500 18 X 46mm
H4595 21mm
H4037 21 X 18 Dp X 42mm Ext
20D222000 21 X 80mm Ext Surface
33LA4H/40LA3H Hex Sockets 33mm OD (1.3")
J4090 5/8" (16mm)
J4213 15mm X 1/2" Ext
L4535 5/8" (16mm) X 10mm Ext
J4829 15mm X 1" Ext
NA (3/4") See 19mm
J4090 16mm (5/8")
NA (7/8") See 22mm
L4535 16mm (5/8") X 10mm Ext
F4571 9/16"
F4285 17mm
J4708 9/16" X 1/2 Ext
J4304 17mm (Special OD)
L4116 11/16"
H4959 17mm X 1-1/8" Ext
L4525 11/16" X 36mm Ext
A6270 15/16" Hex
J4467 17mm X 19mm (3/4") Ext
NA (15/16") See 24mm
F4867 1-1/16" (27mm)
L4897 12mm
F4635 18mm
F4359 14mm
N4457 18mm X 1/4" Ext
A6231 14mm Double
L4118 18mm X 1/4" Ext Spec OD
F4717 15mm
L4556 18mm X 1 1/2" Ext
N4825 15mm (Use/N4826 sp OD)
N4711 18mm X 3-1/8" Ext
33LA4H/40LA3H Hex Surface Sockets 33mm OD (1.3")
A6137 10mm
H4487 18mm X 10mm
J4662 15mm
H4040 18 X 12mm Dp X 28mm Ext
J4398 17mm
N4715 18mm X 80mm Ext 1.10" OD
H4576 17mm X 1.5" Ext
L4426 18mm X 80mm Ext 1.14" OD
H4594 17mm X 1-5/8" Ext
L4474 19mm (3/4")
H4177 18mm
F4869 19mm (3/4") X 7mm
H4612 18mm Over Size
J4381 19mm (3/4") X 18mm Ext
A6215 18mm X 1-1/2" Ext
A6474 19mm Hex X 46mm Ext
33LA4H/40LA3H Hex Fast Lead Sockets 33mm OD (1.3")
J4457 14mm
N4926 18mm
J4608 17mm
N4925 18mm X 1-1/2" Ext
26
H4886
L4646
N4468
H4628
N4698
N4696
F4294
L4886
L4119
F4653
F4541
J4316
J4318
N4177
F4401
N4188
N4036
A6467
20D226300
H4486
H4039
N4136
N4135
N4186
N4034
N4149
L4068
18mm X 8" Ext
18mm X 19mm (3/4") Ext
18mm X 26.5mm Ext
18mm X 32mm (1-1/4") Ext
18mm X 107mm Ext
18mm X 187mm Ext
19mm (3/4")
19mm(3/4") X 3/8" Ext Sp OD
19mm (3/4") X 1.135" OD
19mm (3/4") X 10mm
19mm (3/4") X 16mm Ext
19mm (3/4") X 80mm Ext
19mm (3/4") X 157mm Ext
20mm
21mm
21mm X 1.531" Ext
21mm
21mm X 2" Ext
21mm X 8.5mm Ext
21mm X 10mm
21 X 15mm Dp X 28mm Ext
21mm X 32mm (1-1/4") Ext
21mm X 37mm Ext
21mm X 67mm
21mm X 75mm
21 X 80mm Ext 1.215" OD
21mm X 80mm Ext
L4868 19mm (3/4")
J4044 21mm
N4337
N4466
H4629
N4382
20D232600
L4733
F4487
A6216
L4372
J4989
20D232601
F4512
H4820
L4663
F4867
L4622
21mm X 8mm Ext
21mm X 8.5mm Ext
21mm X 52mm Ext
21mm X 57mm Ext
21mm X 80mm Ext
21mm X 300mm Ext
22mm (7/8")
22mm (7/8") Special OD
22mm (7/8") X 52mm Ext
22mm (7/8") X 80mm Ext
23mm Hex A40LA3H
24mm (15/16")
24mm (15/16") X 45mm Ext
24mm X 10mm Ext
27mm (1-1/16")
30mm (1-3/16")
N4137
N4035
H4447
N4150
H4366
N4440
A6228
L4557
N4439
20D213700
21mm X 107mm Ext
21mm X 150 Ext
21mm X 155mm Ext
21mm X 157mm Ext
21mm X 182mm
22mm (7/8")
22mm (7/8") X 1/4" Ext
22mm (7/8") X 10mm
24mm
24mm X 8" Ext
J4607 22mm (7/8")
0807
Crowfoot Nutrunners - Clutch Shutoff
Tool Configuration
See p 29 for Standard Sockets
Contact Stanley for Special Socket Options
31.75 mm (1.25 in)
31.75 mm (1.25 in)
R
L
46.2 mm
(1.82 in)
46.2 mm
(1.82 in)
M A D E IN U.S.A .
55 mm
(2.16 in)
50.6 mm
(1.99 in)
# 69
# 246
T
MODEL
Non-Reversible
F32L69ACT-6
F32L69ACT-5
Reversible
F32LR69ACT-7
F32LR69ACT-4
F32LR69ACT-3
Rated
Speed
RPM
600
400
650
425
365
Rated
Speed
T
Torque Range
Nm
lb ft
8.5 - 17 6.5 - 12.5
11 - 21 8 - 15.5
"R"
Nose Radius
mm
In
13.5
0.53
13.5
0.53
"T"
Thickness
mm
in
16
0.63
16
0.63
"L"
Length
mm
in
490
19.3
490
19.3
Weight
kg
lb
2.1
4.7
2.1
4.7
6 - 12
4.5 - 9
8.5 - 17 6.5 - 12.5
11 - 22
8 - 16
13.5
13.5
13.5
16
16
16
490
490
490
2.1
2.1
2.1
0.53
0.53
0.53
0.63
0.63
0.63
19.3
19.3
19.3
"R"
"T"
"L"
Torque Range
Nose Radius
Thickness
Length
MODEL
Non-Reversible RPM
Nm
lb ft
mm
in
mm
in
mm
in
F33L69ACT-6
675
13 - 26 9.5 - 19 13.5
0.53
16
0.63
538
21.2
F33L69ACT-5
560
16 - 31 12 - 23
13.5
0.53
16
0.63
538
21.2
F33L246ACT-5
500
17 - 33 12 - 24
15.7
0.62
20.5
0.81
500
19.7
F33L246ACT-4
435
19 - 38 14 - 28
15.7
0.62
20.5
0.81
500
19.7
Reversible
F33LR69ACT-6
680
9 - 18
6.5 - 13 13.5
0.53
16
0.63
538
21.2
F33LR69ACT-4
450
14 - 28 11 - 21
13.5
0.53
16
0.63
538
21.2
Gearcase Extensions
Mounting Options
A8500 Swivel Bail
20D250721 L69 20D250717 L246
Add 10E to Model# 10" Ext Example: F32LR69CT-7-4E
4.7
4.7
4.7
Weight
kg
lb
2.4
5.4
2.4
5.4
2.5
5.5
2.5
5.5
2.4
2.4
5.4
5.4
Maximum
Hex Size
mm (in)
13 (1/2)
13 (1/2)
13 (1/2)
13 (1/2)
13 (1/2)
Maximum
Hex Size
mm (in)
13 (1/2)
13 (1/2)
13 (1/2)
13 (1/2)
13 (1/2)
13 (1/2)
38.1 mm
(1.5 in)
38.1 mm (1.5 in)
R
L
71 mm
(2.78 in)
43 mm (1.69 in)
71 mm
(2.78 in)
50 mm
(1.97 in)
T
# 29
T
# 10
Rated
"R"
"T"
"L"
Speed
Torque Range
Nose Radius
Thickness
Length
MODEL
Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
F33LR29ACT-6
610
9.5 - 19
7 - 14
20.5
0.81
14
0.55
498
19.6
F33LR29ACT-4
400
15 - 30 11 - 22
20.5
0.81
14
0.55
498
19.6
Gearcase Extensions
Other Options
Mounting Options
A8500 Swivel Bail
Example: F33LR29ACT-5-4E
Maximum
Hex Size
Weight
kg
lb
mm (in)
2.5
5.4
19 (3/4)
2.5
5.4
19 (3/4)
20D250718 C29
Rated
"R"
"T"
"L"
Speed
Torque Range
Nose Radius
Thickness
Length
MODEL
Reversible
RPM
Nm
lb ft
mm
in
mm
in
mm
in
F33LR10CT-2
270
22 - 44 16 - 32
20.5
0.81
28
1.1
554
21.8
F33LR10CT-1
200
30 - 60 22 - 44
20.5
0.81
28
1.1
554
21.8
Gearcase Extensions
Other Options
20D250712
L10
Example: F33LR10CT-2-4E
Maximum
Hex Size
Weight
kg
lb
mm (in)
3.6
7.9
19 (3/4)
3.6
7.9
19 (3/4)
Mounting Options
A8500 Swivel Bail
0408
27
Tubenut Nutrunners - Clutch Shutoff
Tool Configuration
See p 29 for Standard Sockets
Contact Stanley for Special Socket Options
42 mm
(1.65 in)
R
L
34 mm
(1.34 in)
54 mm
(2.13 in)
T
# 346
42 mm
(1.65 in)
# 252
L
R
55.9 mm
(2.2 in)
33.3 mm
(1.31 in)
T
Rated
Speed
Torque Range
Nm
lb ft
14 - 20 10 - 15
"R"
Nose Radius
mm
in
13
0.52
"T"
Thickness
mm
in
14
0.54
"L"
Length
mm
in
459
18.07
F32 MODEL
RPM
F32L252CT-3
350
F33 MODEL
F33L346ACT-4
400
15 - 21 11 - 15.5 8.6
0.34
14
0.54
505
19.9
Gearcase Extensions
Other Options
Mounting Options
A8500 Swivel Bail
Example: F32L346ACT-4-4E
48 mm
(1.9 in)
Weight
kg
lb
2.3
5
Maximum Maximum
Hex Size Tube Size
mm (in)
13 (1/2)
mm (in)
8 (5/16)
2.5
5.6
13 (1/2)
20D250724 L346
20D250726 L252
8 (5/16)
54 mm
(2.125 in)
R
R
L
81.7 mm
(3.2 in)
48 mm
(1.9 in)
35.4 mm
(1.4 in)
54 mm
(2.12 in)
T
T
# 74
# 264
Rated Torque
Speed Range
F32 MODEL
RPM
F32L74ACT-5
515
F32L74ACT-3
340
F32L264CT-3
300
F32L264CT-2
235
F32L264CT-1
155
F33 MODEL
F33L74ACT-29
290
Gearcase Extensions
Example: F33L74ACT-3-4E
28
Nose
Radius
mm
18.5
18.5
21.3
21.3
21.3
Thickne
ss
in
0.73
0.73
0.84
0.84
0.84
mm
14.5
14.5
18
18
18
"L"
Length
Nm
10 - 15
15 - 21
16 - 23
20 - 29
31 - 44
lb ft
8 - 11
11 - 15.5
12 - 17
15 - 21
22 - 32
in
0.57
0.57
0.7
0.7
0.7
21 - 30
15 - 22
18.5
0.73
14.5
0.57
533
21
Other Options
20D250729 L74
20D250728 L264
mm
495
495
485
485
485
in
19.5
19.5
19.1
19.1
19.1
Weight
kg
2.4
2.4
2.4
2.4
2.4
2.7
A8500
H1203
A4590
N4433
Maximum Maximum
Hex Size Tube Size
lb
5.3
5.3
5.2
5.2
5.2
mm (in)
mm (in)
18 (11/16) 11 (7/16)
18 (11/16) 11 (7/16)
24 (15/16) 13 (1/2)
24 (15/16) 13 (1/2)
24 (15/16) 13 (1/2)
6
27 (1 1/16) 19 (3/4)
Mounting Options
Swivel Bail
Base Mount Bracket
Angle Head Reaction Bar
Angle Head Split Reaction Bar
0807
0807
29
Socket
Extension
Standard Socket Options
T346 Head
PRIME MOVER MOTORS, AIR SHUT OFF
L
50 mm
(1.96 in)
3/8-18 NPT (4 places)
D
Ref 1-5/16”-20 UN-2B
Left Hand Thread
MODEL
Rated
Speed
Stall Torque
Rated HP Max RPM
Torque
@Max HP
Non-Reversible RPM
Nm
lb ft
HP
RPM
Nm
M40-16
1600
21
16
1.2
820
M40-5
500
65
48
1.2
265
M40-4
375
87
64
1.2
200
"L"
Length
"D"
Diameter
Weight
kg
lb
Output
lb ft
mm
in
mm
in
Standard
11
8
191
7.5
52
2.06
2
4.3
5/8" SD
33
24
216
8.5
52
2.06
2.2
4.7
5/8" SD
43
32
216
8.5
52
2.06
2.2
4.7
5/8" SD
Options
Special Gearing
M40 Output Shaft: 16mm (5/8”) diameter x 44mm (1.75”) long w/5 x 5 x 25 mm (3/16” x 3/16” x 1”) long keyway
Reverse Rotation (Add ‘RR’ MODEL eg: M40RR-5)
VALIDATION ACCESSORIES
21R205101 Torque Transducer Monitor
The Torque Monitor allows operators to easily
adjust the pneumatic tool and enables quality
inspectors to monitor and record in-process tool
performance. Includes battery charger.
21R205102 Replacement Battery for Monitor
21C200402 Coiled 8' Transducer Cable
TVM Tool Validator
Benefits/Features
• MENU driven set-up
• Large back-lit two-line display
• OK and NOK indicator lights (based on HI / LOW limits)
• PEAK indicator for pulse and impact tool use
• Dual filter circuits: choose from Pulse tool or ISO 5393 for direct drive tools
• (50) memory counts for STATISTICS including Range, MEAN value, Cpk/Cp
analysis, HI & LOW sample values and RS 232 printer port for data output
• Works with any Industry Standard transducer (2Mv/v strain gage type)
• Rugged construction with instrument case design
UNIFIED HOSE and TRANSDUCER CABLE
ASSEMBLIES FOR PA/KA/KB TOOLS
• Tests, calibrates and validates all type of air or DC
electric tools including impact tools.
• Includes Bellville washers with a simple o-ring retainer
for quick changes in joint hardness.
• Torque transducer dead weight calibrated with a NIST
Certificate. Connects to Torque Transducer Monitor.
Part No
Torque Range
24V100003 2 - 40 Nm (1.5 - 29 ft lb)
Angle Range
5 - 360°
24V100004 20 - 180 Nm (15 - 132 ft lb)
10 - 450°
24V100005 80 - 350 Nm (59 - 258 ft lb)
20 - 720°
24V100006 200 - 1000 Nm (147 - 737 ft lb)
60 - 760°
Rotary Transducers
Part No
21T200008 Rotary Transducer 5 Nm 1/4" Hex
21T200001 Rotary Transducer 10 Nm 1/4" Hex
Part No
Unified Hose & Cable
Length x Fitting
Part No
Transducer
Cable Length
24C200008 10' x 3/8" Straight
24C200011 25' Cable
24C200017 16' x 3/8" Straight
24C200012 35' Cable
24C200009 25' x 3/8" Straight
24C200013 40' Cable
24C200016 35' x 3/8" Straight
24C200014 50' Cable
24C200018 50' x 3/8" Straight
24C200015 40' Ext Cable
30
21T200002 Rotary Transducer 75 Nm 3/8" SD
0408
PISTOL NUTRUNNERS, TRANSDUCER SHUTOFF
Ergonomic Design Reduces Operator Fatigue
• Virtually no torque reaction to the operator.
• High-Intensity light surrounds the spindle and
illuminates the work surface GREEN (OK) or RED
(NOK) after each tightening cycle
Transducer-Controlled Pulse and Impact Tools
• Patented non-contact electronic transducer for
closed loop control and improved torque accuracy
• Data Output for traceability - every fastening cycle
date- and time-stamped for output through serial or
optional EtherNET communication.
• NIST traceable certificate issued with every tool
for ISO Standards and Gauge records.
L
R
PA PULSE
Includes Adjustment Wrenches
See page 33 for PSI-C Controller
See page 30 for Unified Hose/Cable
Assemblies
Note:
1/4” NPT Inlet, Min. Hose Size: 3/8” ID
Use impact rated sockets and impact grade
anti-wobble sockets
MODEL
PA2PRX-25
PA3PRX-40
PA3PRX-70
PA4PRX-120
Rated
Speed Torque Range (Nm)
RPM
Soft
Hard
8800 13 - 20
13 - 25
8200 20 - 35 20 - 40
7800 35 - 60 35 - 70
6600 60 - 100 60 - 120
• Light weight and minimal size
• Dual chamber motor and double blade
pulsing mechanism speed tightening.
• Ceramic coated aluminum liner and end
plates improve durability.
• Handle positioning balances the tool for
better operator comfort to point-and-shoot
PA Applications
• Free Running Fasteners
• Medium to Hard Joints
• Light to Medium Duty Cycle Applications
(as many as 12 bolts/minute)
• Critical Applications requiring 10% total
torque window accuracy (+7%/- 3%)
"R"
Torque Range (lb ft) Side to Center
Soft
Hard
mm
in
9 - 15
9 - 18
23
0.9
15 - 25
15 - 30
25
1.0
25 - 43
25 - 50
25
1.0
42 - 72
42 - 84
30
1.2
"L"
Length
mm
in
161
6.3
161
6.3
182
7.2
202
8.0
Air
Consumption
cfm L/sec
28
14
38
19
38
19
42
21
Weight
lb
Kg
2.6
1.2
3.0
1.3
3.4
1.5
4.8
2.2
Output
Standard
3/8" SD
3/8" SD
3/8" SD
1/2" SD
KB IMPACT
KA MECHANICAL PULSE
L
L
R
R
KA & KB Applications
• Free & prevailing torque fasteners such as
self-threading bolts.
• Medium to Soft Joints
• Heavy Duty Cycle Applications (up to 30
bolts/minute)
• Critical Applications requiring 15% total
torque window accuracy (+10% /- 5%)
MODEL
KA2PRX-35
KA3PRX-125
KA4PRX-220
KB3PRX-135
KB5PRX-700
0408
R
Rated
Side to
Speed Torque Range (Nm) Torque Range (lb ft)
Center
RPM
Soft
Hard
Soft
Hard
mm
in
8200
18 - 30
18 - 35
13 - 21
13 - 25
23
0.9
7800 63 - 107 63 - 125 44 - 75
44 - 88
28
1.1
6800 110 - 188 110 - 220 80 - 140 80 - 162
31
1.2
9800 67 - 115 67 - 135
50 - 85 50 - 100 23
0.9
4000 360 - 600 360 - 700 270 - 440 270 - 515 38
1.5
"L"
Length
mm
in
129
5.8
183
7.2
222
8.7
180
7.1
367
14.5
Air
Consumption
cfm L/sec
10
5
20
10
30
15
20
10
40
30
Weight
lb
Kg
2.7
1.2
3.6
1.6
6.2
2.8
3.5
1.6
12.6 5.7
Output
Standard
3/8" SD
3/8" SD
1/2" SD
3/8" SD
3/4" SD
31
NUTRUNNERS PULSE, REVERSIBLE, NON SHUT OFF
Enhance Quality and Productivity
• Dual chamber motor and double blade pulsing mechanism speed tightening.
• Pistol or straight models fit different tightening applications.
• Ceramic coated aluminum liner and end plates improve durability.
• PSI Qualifier compatible for error proofing assembly operations.
L
R
Ergonomic Design Reduces Operator Fatigue
• Virtually no torque reaction to the operator.
• Ergonomically quiet with low vibration.
• Oil-free operation eliminates fogging and product contamination.
• Comfortable elastomer grip on pistol models.
Transducer-Controlled Pulse Tools
• Data Output for traceability - every fastening cycle date- and time-stamped for output
through serial or EtherNET communication.
• Simple, low-maintenance and inexpensive cables available in three lengths/styles.
• Air motor and pulse components common to non-transducerized tools.
• NIST traceable certificate issued with every tool for ISO Standards and Gauge records.
PISTOL
Rated
Speed
MODEL
P2PR-15
P3PR-35
P3PR-70
P4PR-120
P5PR-200
RPM
7500
7000
6000
5800
3500
Torque Range (Nm)
Soft
Hard
7 - 13
7 - 15
15 - 30
15 - 35
35 - 60
35 - 70
60 - 102
60 - 120
100 - 170 100 - 200
Torque Range (lb ft)
Soft
Hard
5-9
5 - 11
11 - 22
11 - 26
26 - 44
26 - 52
29 - 75
29 - 88
74 - 125
74 - 147
"R"
Side to Center
mm
in
25
1
28
1.1
28
1.1
33
1.3
39
1.5
"L"
Length
mm
in
140
5.5
157
6.2
173
6.8
196
7.7
200
7.9
Air
Consumption
cfm L/sec
28
14
38
19
38
19
42
21
44
22
Weight
lb
Kg
1.9
0.9
2.6
1.2
3
1.4
4.2
1.9
8
3.6
Output
Standard
3/8" SD
3/8" SD
3/8" SD
1/2" SD
3/4" SD
L
STRAIGHT
Rated
Speed
MODEL
P2LR-15
P3LR-35
P3LR-70
RPM
8000
8200
6500
Torque Range (Nm)
Soft
Hard
7 - 30
7 - 15
15 - 30
15 - 35
35 - 60
35 - 70
STANDARD CONFIGURATION:
Suspension Bail
Adjustment Wrenches
See page 35 for PSI-Qc Qualifer
See page 36 for Hose Light Assemblies
32
R
Torque Range (lb ft)
Soft
Hard
5 - 10
5 - 11
11 - 22
11 - 26
26 - 44
26 - 52
"R"
Side to Center
mm
in
25
1
28
1.1
28
1.1
"L"
Length
mm
in
173
6.8
196
7.7
229
9
Air
Consumption
cfm L/sec
28
14
38
19
38
19
Weight
lb
Kg
1.7
0.8
2.3
1
2.7
1.2
Output
Standard
3/8" SD
3/8" SD
3/8" SD
Note:
1/4” NPT Inlet, Min. Hose Size: 3/8” ID (5/16" - 15 Models)
Use impact rated sockets and impact grade anti-wobble sockets
0807
PSI-C Transducerized Pulse Tool Process Controller
Transducer Torque Control Improves Precision
With Traceability
• Transducer control gives higher accuracy.
• Data Transfer Unit Option for traceability - every fastening
cycle date and time-stamped for output through serial or
EtherNET communication.
Enhances Error Proofing
• Red or Green lights signal the operator of cycle status for
each fastener and the total assembly sequence.
• As many as four parameter sets simplify tool changes for
different joints.
The PSI-C controls the torque of transducer pulse
and impact tools. Functions include tightening
control, network connection, and POKE YOKE bolt
counting and qualifying. Simple MENU programming
reduces set-up time to less than a minute.
Torque Scatter
• Limits control includes torque and pulse counts to detect
tightening errors.
Without Stanley
Pressure
Control
With Stanley
Pressure
Control
Pressure control method adjusts the line
pressure for more repeatable results.
Error Proofing with Transducerized Pulse Tools
Plant Air
The PSI-C compares actual torque results
to quality limits, counts fastened bolts and
detects cross-threads, re-hits, slip-offs.
Parts exit the workstation only after all
bolts are fastened correctly.
PLC
Part Entry
Part Exit
33
Bolts that do not meet torque
specifications are identified for rework
PSI-C Transducerized Pulse Tool Process Controller
PSI Menus Simplify Assembly Setup
• Auto CAL CORRECT enables calibration to your torque standard
without guesswork.
• Two-step tightening for multi-fastener patterns.
• DOWNSHIFT feature allows high speed run-down with shift to
slow speed final pulsing for accurate control.
PSI-C displays
programming options
and assembly results
• DOWNSHIFT programmable to control torque overshoot by
running at reduced RPM until reaching threshold torque.
• JOINT CONDITIONING allows additional pulsing after reaching
torque to counter torque relaxation.
• MIN & MAX Pulse COUNT enables error-proofing to detect cross
threads, strip-outs, slip-off or premature throttle release.
Up/Down keys
scroll menu
options
Cycle and Batch LED’s
Green OK, Red NOK
Front panel for Flash-programming
and DTU access (DataTransferUnit)
Self contained—all air & electrical
connections in one box
PSI - C CONTROLLER SPECIFICATIONS
Operator Interface
Dual Line 0.5” LCD backlit (16) character
Four-button keypad (Enter, Up, Down & Reset/Reverse)
LED indicators: Cycle And Batch Status (OK/NOK)
Serial Port: RS 232 port; RJ45 connector
Standard Data Output: Torque (actual transducer reading), HI/LO
limits, Pulse Count, HI/LO limits, (Date/Time with DTU option)
Auxiliary Port : RJ45 connector for remote operator interface
Operating Conditions:
Humidity: 0 – 95% non condensing
Temperature: 0 to +50 degrees Celsius
Inputs/Outputs:
Inputs: Six Discrete 12-24V Optically Isolated with screw lug
Terminals: Batch Reset, Manual Wrench Accept, Parameter Select
(3) and Disable. Four Dry Contact Relays with screw lug terminals
Outputs: Cycle Accept / Reject, Batch Accept / Reject
Dry contact relays; up to 48 VDC and 7 amps
Dimensions: 21w x 35h x 16d cm (8.25w x 13.6h x 6.4d in)
Weights: 3.5 kg (7.8 lb)
Power Source: Wall Mount Transformer to 16VAC, 50 Hz, 1 AMP
Air Supply: 50 scfm @ 6 bar pressure (87psi)
PSI - C Models and Options
Model Number: PSI – C for Tranducer Pulse Tools
Model Number: PSI – C/68 for Direct Drive Tranducer
Air Tools
EtherNET Option: P/N 21B102702
Separate IP address with buffered memory for
asynchronous network communication. Supports
standard WINDOWS based TCP/IP(10baseT)
protocol; female RJ-45 connector
Data Transfer Unit Option : P/N 24B100100
·
Adds Date/Time to Standard Date Output
·
Stores statistics, Date/Time, four parameter sets, 700 results
per parameter set, for spreadsheet laptop analysis.
·
Enables transfer of programming and data from one PSI – C
controller to another in seconds
Data Collection Transfer Kit Option (Used with Data Transfer Unit)
Includes RJ-45 to USB cabling and PC software for DTU
PSI - C *Power Supply & Internal Printer
PSI-Q/US US 115V/60Hz
PSI- Q/EU Euro 230V/50Hz
PSI- Q/UK UK 230V/50Hz
* One required per PSI-C
34
PSI- Q/JP Japan 115V/50Hz
PSI- Q/AU Australia 240V/50Hz
24B100101 Internal Thermal Label Printer
2” X 4” Adhesive back labels
0807
PSI-Q and PSI-Qc QUALIFIERS
Enable Error Proo ng of Threaded Fastening with all types
of Pneumatic Tools
PSI-Quali ers improve assembly quality by enabling error proo ng to prevent missed
fasteners or incomplete fastening cycles. Incomplete fastening cycles that are
identi ed and alarmed include:
•
Rehits of a pre-tightened fastener
•
Cross-thread of fasteners into mating threads
•
Slip-off (or cam out) of the socket or screwdriver bit from the fastener head before
fastening to nal torque.
•
Short cycle (premature cycle abort) by the operator prior to fastening to nal torque.
Elimination of pressure feedback lines and tool porting reduces installation and
maintenance cost.
PSI-Q Monitors Shutoff Pneumatic Tools
The PSI-Q monitors each fastening cycle to detect incomplete cycles
and report complete cycles.
Plant Air
PSI-Qc Adds Shutoff to Non-shutoff
Pneumatic Tools
The PSI-Qc monitors each fastening cycle and uses a solenoid valve to
shutoff the tool at the end of the cycle. Incomplete cycles are detected
and alarmed.
Plant Air
PLC
PSI-Q
For
Shutoff
Tools
PSI-Qc
For
Non-shutoff
Pulse Tools
Optional Red/Green Hose
Lights Show Cycle Status.
Part Entry
Switch 1
Switch 2
Part Exit
User supplies PLC and switches.
Bolt Counting Enables Error Proo ng with Pneumatic Tools and PSI-Q and Qc
1.
Incoming product for assembly resets the fastener count to zero from
Switch 2
2.
An operator installs the fasteners with a pneumatic assembly tool. The
PSI-Quali er determines complete versus incomplete assembly cycles.
The quali er displays a green light for each complete assembly cycle.
Red lights are illuminated and an alarm sounds for incomplete cycles from
double hits, cross threads, strip outs or short cycles.
35
3.
The PSI-Quali er increments the fastener count for each fastener installed
with a complete cycle. When all of the required fasteners are assembled
with completed cycles, the green batch OK light illuminates. If any fasteners have incomplete assembly cycles, the red NOK light illuminates and
the alarm sounds. A 24V signal from the PSI-Quali er can be used to
prevent products moving out of station (Switch 2) before all fasteners have
complete assembly cycles.
PSI-Q and PSI-Qc QUALIFIERS
PSI Bene ts/Features
• Simple menu driven programming; no laptop needed.
• Learn mode records normal cycle and rehit joint
signatures
• Results display includes target torque, parameter set,
bolt count, and OK/NOK
Flow sensor
connector
Ethernet
RS232 Connector
Hose light
connector
PSI displays
programming
options and
assembly results
• Programming options include torque units, parameter
setup, bolt count, target torque, and transducer scale.
• Counts as many as 99 rundowns with OK / NOK
evaluation for error proo ng.
• COUNT STATUS lights indicate total number of
rundowns and rundowns “OK”. Batch “OK” outputs and
resets the count and indicator lights.
Green cycle and
batch OK and Red
cycle and batch
NOK LED’s
Up/Down keys
scroll menu
• Discrete I/O for tie-in to local station controller, light
tower or PLC.
1
2
3
The PSI develops a rundown
signature from a series of
mass air ow measurements
to detect OK vs. NOK
fastening cycles.
4
Flow
• Ethernet and RS232 serial options for networking.
Time
Power Supply*
PSI-Q Speci cations
Power Source
100-240 VAC 50-60 Hz
PSI-Q/US
US 115V/60Hz
Power Consumption
< 1 amp @ 115 VAC
PSI-Q/EU
Euro 230V/50Hz
Operating Conditions
Temperature Humidity
0 to +50 ºC (32 to 122 ºF)
0 to 95 % non-condensing
PSI-Q/UK
UK 230V/50Hz
PSI-Q/JP
Japan 115V/50Hz
Weight
1 kg. (2 lbs.) Approximately
PSI-Q/AU
Australia 240V/50Hz
Dimensions
15cm (6”) wide x 21cm (8.25”) high x 4cm (1.5”) deep
Inputs/Outputs
Opto-isolated and relay dry contacts; accepts up to 24 VDC/
5 amps with screw lug terminals
Error Proo ng
OK/NOK for acceptable cycles vs REHIT/CROSS THREAD,
STRIP/SLIP OFF, CYCLE ABORT & BATCH COUNT STATUS
Optional Serial Port
RS 232 port; standard DB connector (date/time/Pset#/TgTq/
TQ/COUNT/OK-NOK)
User Interface
Two Line 11mm (0.44”) LCD backlit, (16) Characters
per line; Five-button keypad
(Up, Down, Menu, Reset/Reverse & Admin)
Components to Modify Stanley Pneumatic Shutoff Tools for Venting
*Select one per qualifier.
Optional Red/Green Hose Light
Assemblies
Stanley Tool Model
New Component Required
21C200605
8’ straight 1/4”
A32/33_CT & F32/33_CT
20H207500 Throttle Pin
21C200604
A30_TA/TP & F30_TA/TP
A40_TA/TP & F40_TA/TP
21C200603
24C200000
24C200001
21C200602
PSIQ 0506
36

Angle Nutrunners - Air Actuated Shutoff

Transcription

Similar documents