2015 EASYRIDERS EN CATALOG HANDLEBARS

w/o dimples(without dimples)=for metric cruisers and thru '81 Harley-Davidson
w/ dimples(with dimples)=for '82up Harley-Davidson
the dimension symbols: W=Width / D=Depth / H=Height / CW=Center Width
(the dimensions are measured from center to center of pipe)
It may be necessary to change cables and wiring when using extended / larger handlebars.
We offer extended cables and wiring for Metric Cruisers by request.
*combination of handlebar and risers may not fit some models
DRILLED HEADLIGHT
<polish> (5899) body: aluminum / polished
<black> (5899-BK) body: aluminum / black anodized
EZ HEADLIGHT RELAY (H9828)
12V35/35W(PH7)bulb (Hi-Lo) body size: dia.124xdepth 105.5(mm)
lens size(exposed area): dia.80(mm) fitting: 14.4(mm)
relay size: length 29mm x width 27mm x thickness 8.5mm
H4bulb use only DC12V MAX current 6A 70W
work with "always on" headlight models
*make sure the ignition is off when installing
This simple device allows the motorcycle to be started
with headlight off saving valuable amps.
To turn on the headlight after engine is running,
simply activate the high/low switch.
TRIANGLE SPOTLIGHT
chrome (5841)
black (5841-BK)
4.5inch VINTAGE STYLE SPOTLIGHT
Clear (5875) Invar (5915)
body: chrome plated steel
12V55W H3bulb (single bulb)
body size: dia.126×depth 73(mm)
lens size: dia.102(mm)
fitting bolt: 9.6(mm)
55W H3 single beam
"SHOT" TURN SIGNAL SERIES
CLOSED CHOPPER BAR
1” steel / chrome plated
w/ dimples (0792)
w/o dimples (0793)
LOW APE HANDLE BAR
1” steel / chrome plated
w/ dimples (0801)
w/o dimples (0800)
NARROW BOBBER HIGH BAR
1” steel / black powder coated
w/o dimples (0774-BK)
w dimples (0775-BK)
1” stainless / polished
w/o dimples (0774)
w dimples (0775)
BOBBER HIGH BAR
1” steel / black powder coat
w/o dimples (0765-BK)
w dimples (0766-BK)
1” stainless / polished
w/o dimples (0765)
w dimples (0766)
NARROW CHOPPER BAR
1” steel / chrome plated
w/o dimples (0769)
w dimples (0770)
EARLY XL BAR
1” stainless / polished
w dimples (0785)
NARROW SKY HIGH BAR
1” steel / chrome plated
w/o dimples (0735)
w/ dimples (0736)
NARROW APE BAR
1” steel / black powder coat
w/o dimples (0706-BK)
w/ dimples (0707-BK)
1” steel / chrome plated
w/o dimples (0706)
w/ dimples (0707)
1” stainless / polished
w/o dimples (0714)
w/ dimples (0715)
size: W:550 D:250 H:200 CW:75(mm)
*fits 2piece narrow riser only
*NOT fit springer models
W:690 D:120 H:170 CW:82(mm)
*fits 2piece narrow riser only
*NOT fit springer models
size: W:710 D:170 H:235 CW:125(mm)
1”=W:745 D:165 H:185 CW:120(mm)
7/8” steel / black powder coat (NT1387BK)
7/8” stainless / polished
(NT1387)
7/8”=W:735 D:165 H:180 CW:120(mm)
(0589)
SHOT TURN SIGNALS
w/ visor, smoke/flat lens
chrome (1137)
4pcs, 8mm threaded
amber bulb 23W
SHOT BULLET
TURN SIGNALS
w/ visor, smoke/
bullet lens
chrome (0510)
4pcs, 8mm threaded
amber bulb 23W
SHOT CHOPPER
TURN SIGNALS
w/ visor, smoke/
chopper lens
chrome (0516)
4pcs, 8mm threaded
amber bulb 23W
(0581)
(0585)
SHOT TURN SIGNALS
w/ visor, smoke/flat lens black/24k chrome (0589)
w/ visor, smoke/flat lens satin chrome (0585)
w/o visor, smoke/flat lens satin chrome (0581)
W:580 D:310H:185 CW:145(mm)
7/8” steel / chrome plated (NT1405)
W:555 D:280H:185 CW:140(mm)
W:690 D:240 H:170 CW:120(mm)
4pcs, 8mm threaded amber bulb 23W
SHOT TURN SIGNALS
w/o visor, smoke/flat lens
chrome (0507)
4pcs, 8mm threaded
amber bulb 23W
SHOT BULLET
TURN SIGNALS
w/o visor, smoke/
bullet lens
chrome (0513)
4pcs, 8mm threaded
amber bulb 23W
SHOT CHOPPER
TURN SIGNALS
w/o visor, smoke/
chopper lens
chrome (0519)
4pcs, 8mm threaded
amber bulb 23W
SHOT TURN SIGNALS
w/ visor, smoke/flat lens
black (0542)
4pcs, 8mm threaded
amber bulb 23W
w/o dimples
W:760 D:230 H:400 CW:150(mm)
LONG BOLT SET
for SHOT TURN SIGNALS
chrome (0506)
2pcs, 8mm threaded
1”=W:720 D:165 H:310 CW:120(mm)
w dimples
w/o dimples(without dimples)=for metric cruisers and thru '81 Harley-Davidson
w/ dimples(with dimples)=for '82up Harley-Davidson
the dimension symbols: W=Width / D=Depth / H=Height / CW=Center Width
(the dimensions are measured from center to center of pipe)
It may be necessary to change cables and wiring when using extended / larger handlebars.
We offer extended cables and wiring for Metric Cruisers by request.
*combination of handlebar and risers may not fit some models
w/o dimples
w dimples
BOBBER MID BAR
1” stainless / polished
w/o dimples (0807)
w/ dimples (0808)
1” steel / black powder coated
w/o dimples (0809-BK)
w/ dimples (0810-BK)
size W:705 D:145 H:115 CW:120(mm)
LOOSE BAR black
1” steel / black powder coat
w/o dimples (0759-BK)
w/ dimples (0760-BK)
W:715 D:180 H:280 CW:135(mm)
DRAG RISE BAR
1” steel / chrome plated
w/o dimples (0796)
w/ dimples (0797)
W:660 D:110 H:110(mm)
RABBIT BAR
1” steel / black powder coat
w/o dimples (0049-BK)
w/ dimples (0075-BK)
1” stainless / polished
w/o dimples (0049)
w/ dimples (0075)
steel / black powder coated
Steel / Chrome
w/ dimples (0813)
steel / chrome plated
size W:695 D:110 H:355(mm)
*NOT fit springer softail
RISING BAR 1”
Steel / Black
w/o dimples (0811-BK)
w/ dimples (0812-BK)
steel / black powder coated
Steel / Chrome
w/o dimples (0811)
w/ dimples (0812)
steel / chrome plated
size W:665 D:110 H:345(mm)
*NOT fit springer softail
W:620 D:150 H:200 (mm)
*NOT fit Springer models
1”=W:460 D:280 H:210 CW:150(mm)
7/8” stainless / polished (0175)
7/8”=W:450 D:280 H:200 CW:150(mm)
8” ATTACK BAR
1” black steel / black powder coat
w/o dimples (0718-BK)
w/ dimples (0719-BK)
1” stainless / polished
w/o dimples (0718)
w/ dimples (0719)
10” ATTACK BAR
1” black steel / black powder coat
w/o dimples (0716-BK)
w/ dimples (0717-BK)
1” stainless / polished
w/o dimples (0716)
w/ dimples (0717)
1”=W:610 D:120 H:203
CW w/o dimples:150 / w dimples:135(mm)
1”=W:610 D:120 H:254
CW w/o dimples:150 / w dimples:135(mm)
7/8” stainless / polished (NT1067)
7/8” stainless / polished (NT1027)
SWALLOW BAR
1” steel / black powder coat
w/o dimples (0798-BK)
w/ dimples (0799-BK)
1” steel / chrome plated
w/o dimples (0798)
w/ dimples (0799)
SHORT RISE BAR
1” steel / black powder coat
w/ dimples (0779)
NARROW DRAG BAR
1” stainless / polished
w/o dimples (0733)
w/ dimples (0734)
DRAG BAR
1” steel / chrome plated
w/o dimples (0050)
1” stainless / polished
w/o dimples (0001)
w/ dimples (0024)
7/8”=W:570 D:110 H:203 CW:140(mm)
RISING BAR 1-1/4inch
Steel / Black
w/ dimples (0813-BK)
PULLBACK RISER BAR
1” stainless / poliched
w/o dimples (0788)
w/ dimples (0789)
7/8”=W:570 D:110 H:254 CW:140(mm)
W:640 D:100 H:120 CW:75(mm)
W:720 D:160 H:20(mm)
6inch Z BAR
1” steel / chrome plated
w/o dimples (0814)
w/ dimples (0815)
size W:716 D:102 H:152 CW:170(mm)
DROP BAR
1” stainless / polished
w/o dimples (0729)
1”=W:825 D:115 H:55 CW:150(mm)
1”=W:610 D:120 CW:150(mm)
1”=W:680 D:130 H:190 CW:190(mm)
w/o dimples(without dimples)=for metric cruisers and thru '81 Harley-Davidson
w/ dimples(with dimples)=for '82up Harley-Davidson
the dimension symbols: W=Width / D=Depth / H=Height / CW=Center Width
(the dimensions are measured from center to center of pipe)
It may be necessary to change cables and wiring when using extended / larger handlebars.
We offer extended cables and wiring for Metric Cruisers by request.
*combination of handlebar and risers may not fit some models
w/o dimples
w dimples
BOBBER MID BAR
1” stainless / polished
w/o dimples (0807)
w/ dimples (0808)
1” steel / black powder coated
w/o dimples (0809-BK)
w/ dimples (0810-BK)
size W:705 D:145 H:115 CW:120(mm)
LOOSE BAR black
1” steel / black powder coat
w/o dimples (0759-BK)
w/ dimples (0760-BK)
W:715 D:180 H:280 CW:135(mm)
DRAG RISE BAR
1” steel / chrome plated
w/o dimples (0796)
w/ dimples (0797)
W:660 D:110 H:110(mm)
RABBIT BAR
1” steel / black powder coat
w/o dimples (0049-BK)
w/ dimples (0075-BK)
1” stainless / polished
w/o dimples (0049)
w/ dimples (0075)
steel / black powder coated
Steel / Chrome
w/ dimples (0813)
steel / chrome plated
size W:695 D:110 H:355(mm)
*NOT fit springer softail
RISING BAR 1”
Steel / Black
w/o dimples (0811-BK)
w/ dimples (0812-BK)
steel / black powder coated
Steel / Chrome
w/o dimples (0811)
w/ dimples (0812)
steel / chrome plated
size W:665 D:110 H:345(mm)
*NOT fit springer softail
W:620 D:150 H:200 (mm)
*NOT fit Springer models
1”=W:460 D:280 H:210 CW:150(mm)
7/8” stainless / polished (0175)
7/8”=W:450 D:280 H:200 CW:150(mm)
8” ATTACK BAR
1” black steel / black powder coat
w/o dimples (0718-BK)
w/ dimples (0719-BK)
1” stainless / polished
w/o dimples (0718)
w/ dimples (0719)
10” ATTACK BAR
1” black steel / black powder coat
w/o dimples (0716-BK)
w/ dimples (0717-BK)
1” stainless / polished
w/o dimples (0716)
w/ dimples (0717)
1”=W:610 D:120 H:203
CW w/o dimples:150 / w dimples:135(mm)
1”=W:610 D:120 H:254
CW w/o dimples:150 / w dimples:135(mm)
7/8” stainless / polished (NT1067)
7/8” stainless / polished (NT1027)
SWALLOW BAR
1” steel / black powder coat
w/o dimples (0798-BK)
w/ dimples (0799-BK)
1” steel / chrome plated
w/o dimples (0798)
w/ dimples (0799)
SHORT RISE BAR
1” steel / black powder coat
w/ dimples (0779)
NARROW DRAG BAR
1” stainless / polished
w/o dimples (0733)
w/ dimples (0734)
DRAG BAR
1” steel / chrome plated
w/o dimples (0050)
1” stainless / polished
w/o dimples (0001)
w/ dimples (0024)
7/8”=W:570 D:110 H:203 CW:140(mm)
RISING BAR 1-1/4inch
Steel / Black
w/ dimples (0813-BK)
PULLBACK RISER BAR
1” stainless / poliched
w/o dimples (0788)
w/ dimples (0789)
7/8”=W:570 D:110 H:254 CW:140(mm)
W:640 D:100 H:120 CW:75(mm)
W:720 D:160 H:20(mm)
6inch Z BAR
1” steel / chrome plated
w/o dimples (0814)
w/ dimples (0815)
size W:716 D:102 H:152 CW:170(mm)
DROP BAR
1” stainless / polished
w/o dimples (0729)
1”=W:825 D:115 H:55 CW:150(mm)
1”=W:610 D:120 CW:150(mm)
1”=W:680 D:130 H:190 CW:190(mm)
BLACK (H0022-BK)
POLISHED (H0022)
2PIECE NARROW RISER 1inch
BLACK (H0022-BK) duralumin / black anodized / 1inch
POLISHED (H0022) duralumin / polished / 1inch
width of handlebar clamp: 65mm
riser height: 1.3inch
comes with bolt set
*NOT fit springer models
(1)
VINTAGE STYLE GRIPS
black (2043-BK)
white (2043-WH)
for 1inch
1inch
(2)
EARLY BARREL GRIPS
<for 1inch bar>
1. light brown (2040-AG)
2. black
(2040-BK)
3. white
(2040-WH)
4. smoke flake (2040-LS)
5. red flake
(2040-RD)
(3)
(4)
(5)
<for 7/8inch bar>
1. light brown (2039-AG)
2. black
(2039-BK)
3. white
(2039-WH)
4. smoke flake (2039-LS)
5. red flake
(2039-RD)
3 INCH ROUND
BRASS STEM
MIRROR
(H5015)
2inch
OLD STYLE RISERS <alumi/polished>
1inch BLACK (0356-BK) duralumin / black anodized / 1inch
POLISHED (0356) duralumin / polished / 1inch
2inch BLACK (0357-BK) duralumin / black anodized / 2inch
POLISHED (0357) duralumin / polished / 2inch
mirror body: steel / chrome plated
stem: brass / polished
mirror diameter: 80mm
*for Harley-Davidson
*not fit Metric models
sold in pairs
STRAIGHT HANDLEBAR RISERS
<steel/chrome> 2inch (0350)
sold in pairs
BUTTON SWITCH
FLAT LEVER
MINI SWITCH SINGLE <for 1inch>
FLAT LEVER
chrome (H9821-CH)
black (H9821-BK)
FLAT LEVER(automatic cancel)
chrome (H9822-CH)
black (H9822-BK)
BUTTON SWITCH
chrome (H9823-CH)
black (H9823-BK)
*NOT waterproof
MINI SWITCH SINGLE <for 7/8inch>
FLAT LEVER
chrome (NT1298CH)
aluminum (NT1298AL)
black (NT1298BK)
FLAT LEVER(automatic cancel)
chrome (NT1299CH)
aluminum (NT1299AL)
black (NT1299BK)
BUTTON SWITCH
chrome (NT1300CH)
aluminum (NT1300AL)
black (NT1300BK)
*NOT waterproof
HANDLE SPACER SET (H0021)
steel / chrome plated
size: outer dia. 1inch / inner dia.
13mm / height 50mm
comes with stainless cap bolt 1/2-13 x 4 1/2
4 INCH ROUND
BRASS STEM
MIRROR
(H5016)
SOLID MOUNT RISER BUSHING SET (H0008)
stainless steel comes with 1/2-13×1 3/4
cap bolts(stainless steel)
*not fit Softail Deuce (FXST-D) / springer models / '04up XL
mirror body: steel / chrome plated
stem: brass / polished
mirror diameter: 100mm
*for Harley-Davidson
*not fit Metric models
FRONT FORK MOUNT MIRROR BRACKET
(5056) <for 39&41mm>
fits 10mm threaded mirror
*Include model and year when ordering as stud bolts may vary.
*Some risers may not fit some models due to height and / or handlebar.
*Part #’s above are for Harley-Davidson (without stud bolts), but we carry stud bolts for Metric Cruisers.
*Stud bolts sold separately.
sold each
BLACK (H0022-BK)
POLISHED (H0022)
2PIECE NARROW RISER 1inch
BLACK (H0022-BK) duralumin / black anodized / 1inch
POLISHED (H0022) duralumin / polished / 1inch
width of handlebar clamp: 65mm
riser height: 1.3inch
comes with bolt set
*NOT fit springer models
(1)
VINTAGE STYLE GRIPS
black (2043-BK)
white (2043-WH)
for 1inch
1inch
(2)
EARLY BARREL GRIPS
<for 1inch bar>
1. light brown (2040-AG)
2. black
(2040-BK)
3. white
(2040-WH)
4. smoke flake (2040-LS)
5. red flake
(2040-RD)
(3)
(4)
(5)
<for 7/8inch bar>
1. light brown (2039-AG)
2. black
(2039-BK)
3. white
(2039-WH)
4. smoke flake (2039-LS)
5. red flake
(2039-RD)
3 INCH ROUND
BRASS STEM
MIRROR
(H5015)
2inch
OLD STYLE RISERS <alumi/polished>
1inch BLACK (0356-BK) duralumin / black anodized / 1inch
POLISHED (0356) duralumin / polished / 1inch
2inch BLACK (0357-BK) duralumin / black anodized / 2inch
POLISHED (0357) duralumin / polished / 2inch
mirror body: steel / chrome plated
stem: brass / polished
mirror diameter: 80mm
*for Harley-Davidson
*not fit Metric models
sold in pairs
STRAIGHT HANDLEBAR RISERS
<steel/chrome> 2inch (0350)
sold in pairs
BUTTON SWITCH
FLAT LEVER
MINI SWITCH SINGLE <for 1inch>
FLAT LEVER
chrome (H9821-CH)
black (H9821-BK)
FLAT LEVER(automatic cancel)
chrome (H9822-CH)
black (H9822-BK)
BUTTON SWITCH
chrome (H9823-CH)
black (H9823-BK)
*NOT waterproof
MINI SWITCH SINGLE <for 7/8inch>
FLAT LEVER
chrome (NT1298CH)
aluminum (NT1298AL)
black (NT1298BK)
FLAT LEVER(automatic cancel)
chrome (NT1299CH)
aluminum (NT1299AL)
black (NT1299BK)
BUTTON SWITCH
chrome (NT1300CH)
aluminum (NT1300AL)
black (NT1300BK)
*NOT waterproof
HANDLE SPACER SET (H0021)
steel / chrome plated
size: outer dia. 1inch / inner dia.
13mm / height 50mm
comes with stainless cap bolt 1/2-13 x 4 1/2
4 INCH ROUND
BRASS STEM
MIRROR
(H5016)
SOLID MOUNT RISER BUSHING SET (H0008)
stainless steel comes with 1/2-13×1 3/4
cap bolts(stainless steel)
*not fit Softail Deuce (FXST-D) / springer models / '04up XL
mirror body: steel / chrome plated
stem: brass / polished
mirror diameter: 100mm
*for Harley-Davidson
*not fit Metric models
FRONT FORK MOUNT MIRROR BRACKET
(5056) <for 39&41mm>
fits 10mm threaded mirror
*Include model and year when ordering as stud bolts may vary.
*Some risers may not fit some models due to height and / or handlebar.
*Part #’s above are for Harley-Davidson (without stud bolts), but we carry stud bolts for Metric Cruisers.
*Stud bolts sold separately.
sold each