Layout 1 (Page 1)

Transcription

Layout 1 (Page 1)

SWITCHES
(brackets) indicate momentary position
SUB MINIATURE TOGGLE
0.2" dia. threaded bushing unless otherwise noted.
S.P.D.T. ON-ON
Rated: 1.5 amp @ 250 Vac.
Solder lug terminals. 0.4” long bat handle.
CAT# SMTS-4 $1.35 each
10 for $12.50 • 100 for $110.00
S.P.D.T. ON-OFF-(ON)
C&K 7107. SPDT, center-off, momentary
one direction, miniature toggle switch.
Rated 0.4VA. Plain, 1/4" unthreaded
bushing. Flat toggle handle. Horizontal
switching action. Right-angle pc pins.
CAT# MTS-69
$1.00 each
D.P.D.T. ON-OFF-ON
RATED: 3 amp @ 120 Vac
Threaded bushing. Solder lug terminals.
CAT# MTS-12 $1.85 each
10 for $17.00 • 100 for $145.00
S.P.3.T. ON-ON-ON
D.P.D.T. ON-ON
Rated: 1.5 amp @ 250 Vac.
Solder lug terminals. 0.4” long bat handle.
CAT# SMTS-8 $1.75 each
10 for $15.50 • 100 for $135.00
S.P.D.T. ON-ON
NEW
NKK # G3T-12. Tiny surface-mount
toggle switch rated 0.4VA 28VAC/DC.
Right angle mounting. Toggle action is parallel to
pc board. 8.5 x 9.0 x 5.6mm. Surface mount pads.
CAT# TSMT-4 $2.50 each
10 for $2.25 each
C&K 7211. Two-pole, 3-position, on-on-on
mini-toggle switch with short, 0.2", bat
handle. Horizontal switching action.
1/4-32 threaded bushing. Gold-plated,
right-angle pc pins. Rated 2A, 250Vac / 3A,
120Vac. Note: See switching action diagram online
for alteration for "3-way" function.
CAT# MTS-101
$2.25 ea. • 10 for $2.10 ea.
S.P.D.T. ON-OFF-(ON)
NON-THREADED BUSHING
Rated: 5 amp @ 120 Vac. Center-off
P.C. style. Momentary one direction only.
CAT# MTS-70PC 50¢ each
10 for $4.75 • 100 for $43.00
MINIATURE TOGGLE
1/4-40 threaded bushing.
0.43" long handle unless otherwise noted
S.P.D.T. ON-ON
RATED: 6 amp @ 120 Vac. Solder lug
terminals.CAT# MTS-4
$1.25 each
D.P.D.T. ON-ON
RATED: 6 amp @ 120 Vac. Solder lugs.
10 for $16.00 • 100 for $135.00
D.P.D.T. ON-ON
S.P.D.T. ON-ON
D.P.D.T. mini-toggle switch. Plain,
non-threaded 0.25" diameter
bushing. 0.95" long, flat toggle
handle. Rated 5A, 120Vac. PC leads.
RATED: 6 amp @ 120 Vac. P.C. terminals.
CAT# MTS-75
10 for $11.00 • 100 for $95.00
CAT# MTS-4PC $1.25 each
10 for $11.00 • 100 for $95.00
DPDT ON-ON PC MOUNT
SPDT ON-ON, RIGHT-ANGLE
ALCO MTM 106D. 6mm (0.27") long
bat handle. Rated: 6A (AC), 4A (DC)
125V/3A 250Vac. 1/4" diameter non-threaded
bushing, panel mount. Epoxy sealed right
angle PC leads. The upper switch body has two
mounting pins for added support.
CAT# MTS-4H
85¢ each
75¢ each
Rated: 6A 125 Vac. Non-threaded
bushing. Right angle pc leads.
NEW
CAT# MTS-89 60¢ each
10 for 55¢ each • 100 for 45¢ each
D.P.D.T. ON-OFF-ON
C&K 7203. Two-pole, 3-position, on-off-on
mini-toggle switch with short, 0.2", bat
handle. Horizontal switching action. 1/4-32
threaded bushing. Gold-plated, right-angle
pc pins. Rated 2A, 250Vac / 3A, 120Vac.
S.P.D.T. ON-ON
CAT# MTS-80
C & K 7101. Rated 0.4VA Max.
6mm (0.25") dia. plain, unthreaded bushing.
0.3" long mini-toggle. Gold plate pc leads.
Vertical switching action. Made in USA.
D.P.D.T. CENTER-OFF MOMENTARY
CAT# MTS-4VP
75¢ each
Rated: 5A 125 Vac, 3A 250 Vac.
Solder residues on two of solder lugs. UL.
CAT# MTS-4U 2 for $1.00
100 for 35¢ each
S.P.D.T.
ON-OFF-ON
12
$2.25 each
D.P.D.T. ON-OFF-(ON)
Double-pole, center-off, momentary one
direction. 1/4-40 threaded bushing.
Solder-loop terminals. Rated 6A / 125Vac.
CAT# MTS-94
RATED: 5 amp @ 120 Vac
Center off. Solder lug terminals. UL.
10 for $11.00 • 100 for $95.00
Double pole, center-off, momentary
both directions. 1/4-40 threaded
bushing. Solder-loop terminals.
Rated 6A / 125Vac.
CAT# MTS-93
SPDT ON-ON, USED
$2.25 ea. • 10 for $2.10 ea.
$2.30 each
3.P.D.T. ON-ON
Rated 6 Amps, 125 Vac.
Solder-lug terminals.
CAT# MTS-60
$2.40 each
NO HASSLE RETURN POLICY
TOGGLE SWITCH SAFETY COVERS
3.P.D.T. ON-OFF-ON
Fits all our standard toggle switches.
Prevents accidental switching. When
cap closes it switches toggle to down
position. Cap must be open to change
switch position. Cap stays open at
90º angle, but springs to closed position w/ light touch.
CAT# MTS-63
$2.60 each
4.P.D.T. ON-ON
Black CAT# SC-510
$2.00 each • 10 for $1.75 each
$3.25 each
CAT# MTS-70
SWITCH COVER FOR 1/4" BUSHING
Protects mini-toggle switches from dust & moisture.
Rubber boot attached to 1/4" threaded nut fits
over handle and screws onto bushing. Fits all
mini-toggle switches (our CAT#s MTS-XXX) except
those with short or extra-long handles. Round trim,
black plastic. CAT# SBT-1 75¢ each
STANDARD TOGGLE
15/32" threaded mounting bushing
Translucent Red CAT# SC-518
$2.00 each • 10 for $1.75 each
CAT# SC-514
$2.00 each • 10 for $1.75 each
Carbon-fiber look
JOYSTICK
THUMB JOYSTICK W/ SELECT BUTTON
2-Axis, self-centering joystick.
Two independent 10K Ohm pots, one per
axis. Also has a select button actuated
when the joystick is pressed down.
27mm dia. footprint. 31mm max height.
15/20A TOGGLE
SWITCHES
CAT# JS-932
$3.95 each
10 for $3.56 each
Heavy-duty, toggle
switches rated 20A @
125Vac / 15A @ 250Vac.
STS-70 and STS-71 are
screw
solder/qc
rated 15A @ 125Vac /
terminals
terminals
10A @ 250Vac.
Note: Parentheses in DESCRIPTION,
ie, (on)-off, indicates a momentary-on position.
S.P.D.T. Screw terminals.
Rated 10A / 12Vdc. Base is
75 x 12 x 9mm high. Two mounting holes on 46mm centers.
EA
$2.00
$2.35
$2.40
$2.55
$2.60
$3.00
$3.20
$3.35
$3.55
$3.65
$3.85
10
$1.85
$2.10
$2.20
$2.35
$2.45
$2.80
$2.95
$3.05
$3.25
$3.40
$3.65
SOLDER / 0.25” QC TERMINALS
STYLE DESC
CAT#
STS-94
SPST
on-off
STS-95
SPDT
on-on
STS-96
SPDT
on-off-on
STS-100 SPDT
(on)-off-(on)
STS-97
DPST
on-off
STS-98
DPDT
on-on
STS-99
DPDT
on-off-on
STS-101 DPDT
(on)-off-(on)
STS-102 DPDT
(on)-off-on
EA
$2.10
$2.45
$2.50
$2.65
$2.70
$3.10
$3.30
$3.45
$3.65
10
$1.95
$2.20
$2.30
$2.45
$2.55
$2.90
$3.05
$3.15
$3.35
$2.25 each
LARGE BODY STYLE
15A N.O. MOMENTARY
Cherry E13. S.P.S.T. normallyopen switch. Plunger height,
11mm. Mounting holes on
26mm centers. Rated 15A 125/250Vac,
3/4HP 125Vac, 1.5HP 250Vac. 46.5 x 16 x 16mm
body. 0.25"qc/solder terminals. UL, CSA.
CAT# SMS-301
$1.35 ea. • 10 for $1.20 ea.
15 AMP S.P.D.T.
DUAL SPST TOGGLE SWITCH
Rated 3 Amps @ 125 Vac. Looks like a
DPST toggle switch, but it is actually
two separate single pole switches.
When one is open, the other is closed.
Solder terminals.
$1.50 each
TOGGLE SWITCH COVERS
FOR 15/32” BUSHING
CAT# SBT-2
CAT# SBT-4
Vabsco # UR15N-EACF 1.86.
Bent lever that extends 0.10"
past body. Body: 1.82" x
0.64" x 0.80"H (46 x 16 x
20mm). Rated: 15 Amp 1/2 HP 125/250 Vac.
1/4" QC/solder terminals are slightly tarnished due
to storage. UL.
CAT# SMS-361
$2.85 each
15 AMP S.P.D.T.
Unimax . 15 Amps @
125/250 Vac. Body size:
1.81” x 0.64” x 0.64”.
0.25” qc / solder terminals.
3/8” dia. x 0.4” long threaded bushing.
0.25” dia. plunger. UL, CSA.
CAT# SMS-203 $1.50 each
10 for $ 1.30 each • 100 for $ 1.00 each
MISCELLANEOUS SNAP ACTION
DPDT LOW-PROFILE
Protects standard toggle switches
from dust and moisture. Fits all our
standard toggle switches.
Round, knurled nut
Rubberized hex-nut
CAT# SWS-10
SNAP ACTION SWITCHES
SCREW TERMINALS
STYLE DESC
CAT#
STS-56 SPST
on-off
STS-57 SPDT
on-on
STS-58 SPDT
on-off-on
STS-78 SPDT
(on)-off-(on)
STS-59 DPST
on-off
STS-89 DPDT
on-on
STS-60 DPDT
on-off-on
STS-79 DPDT
(on)-off-(on)
STS-80 DPDT
(on)-off-on
STS-70 4PDT
on-on
STS-71 4PDT
on-off-on
CAT# STS-20
KNIFE SWITCH
85¢ each
$1.00 each
ZIPPY# HM2-01H-000-Z.
Rated 1A / 125 Vac. 19 x 14 x 7mm.
PC terminals. CAT# SMS-341
75¢ each • 10 for 65¢ each
ORDER TOLL FREE 1-800-826-5432
13
SNAP ACTION SWITCHES
STANDARD BODY
Standard body switches are 27.8 x 15.9 x 10.3mm, S.P.D.T.
STYLE
A
B
C
D
No Lever
Standard Lever
Long Lever
Sim-roller Lever
F
E
Short Roller Lever Standard Roller Lever
STYLE
A
A
AMPS
3
6
TERM.
0.187”
0.187”
MFG. #
Zippy VMN-03N-00D0-B
Omron D3V-6G-1C24-K
CAT#
SMS-336
SMS-300
PRICE
0.75
0.95
10
0.65
0.90
100
0.55
0.80
A
B
B
B
10
0.1
3
5
0.25”
0.187”
0.187”
0.187”
Zippy VMN-P1N-02D0-B
Mulon Note: SPST N.O.
SMS-226
SMS-318
SMS-332
SMS-299
1.10
1.50
1.60
0.90
1.00
1.35
1.45
0.80
0.85
1.20
1.25
0.75
B
B
B
B
B
B
C
C
C
C
C
D
E
E
E
F
F
F
F
10
10
10
11
15
15
0.1
3
6
15
15
10
0.1
3
6
0.1
6
15
15
0.187”
0.187”
0.25”
0.187”
0.187”
0.25”
0.187”
0.187”
0.187”
0.187”
0.187”
0.25”
0.187”
0.187”
0.187”
0.187”
0.187”
0.187”
0.187”
SMS-327
SMS-334
SMS-222
SMS-308
SMS-310
SMS-195
SMS-322
SMS-317
SMS-329
SMS-339
SMS-196
SMS-223
SMS-314
SMS-330
SMS-338
SMS-319
SMS-312
SMS-315
SMS-197
1.50
1.50
1.50
1.50
2.20
2.20
1.50
1.90
2.10
2.30
2.30
1.50
1.40
1.75
2.10
1.95
2.10
2.45
2.45
1.35
1.35
1.35
1.35
2.10
2.10
1.35
1.75
1.95
2.10
2.10
1.35
1.25
1.60
1.95
1.80
1.95
2.35
2.35
1.20
1.20
1.20
1.20
1.85
1.85
1.20
1.60
1.80
1.90
1.90
1.20
1.10
1.45
1.80
1.65
1.80
2.20
2.20
Zippy V3-10L-02D3-Z
Defond
Zippy VMN-15Q-02D0-B
Vabsco BR15IL-EACF
Zippy VMN-P1D-03D0-B
Zippy VMN-03D-03D0-B
Zippy VMN-06D-03D0-B
Zippy VMN-15L-03D0-B
Vabsco Note: X-long lever
Zippy VMN-P1N-05D0-B
Zippy VMN-06S-05D0-B
Zippy VMN-P1D-06D0-B
Zippy VMN-06S-06D0-B
Zippy VMN-15Q-06D0-B
Vabsco BR15IL-QAJE
Small body switches are 19.8 x 10.6 x 6.4mm,
S.P.D.T. and have solder terminals. 125/250 Vac.
SMALL SIZE BODY
STYLE
A
B
C
D
E
F
No Lever
Short
Lever
Sim-roller
Lever
Short Roller
Lever
Lever extend 9mm
beyond end of switch
Bent
Lever
STYLE
A
A
B
C
AMPS
3
5
5
5
D
D
F
5
5
5
D
D
E
G
D
14
MFG. #
Unimax 171-D10, used
Microswitch 21SM284
G
Short lever
2-terms covered w/
heat shrink tubing
CAT#
SMS-358
SMS-359
SMS-220
SMS-221
PRICE
0.50
0.50
1.10
1.00
10
0.45
0.45
0.95
0.85
100
0.40
0.40
0.85
0.75
Burgess V4NC / PC pins
Micro 311SM56
SMS-219
SMS-365
SMS-357
1.30
1.25
1.15
1.15
1.10
1.00
1.00
0.85
0.90
10.1
10.1
0.1
Zippy 1000620452
Zippy SM-10H-05B
Cherry DB3
SMS-352
SMS-351
SMS-302
1.45
1.45
0.85
1.30
1.30
0.80
1.15
1.15
0.70
6
6
Defond, Used
Zippy SW-05S-05A0
SMS-303U
SMS-342
0.50
1.30
0.45
1.15
0.40
1.00
VISIT OUR WEBSITE - WWW.ALLELECTRONICS.COM
2-POLE OFF-ON-(ON)
ROCKER SWITCH
ROCKER SWITCHES
ROUND ROCKERS
Matte-black, single-pole rocker switches.
Snap-mount in 0.8” diameter hole.
0.9” dia. bezel. 0.6” dia. round rocker.
Rated 13 Amps / 125 Vac. Solder or 0.187”
qc terminals. TUV. Three configurations available:
ON-OFF, S.P.S.T. CAT# RS-144
ON-ON, S.P.D.T. CAT# RS-145
ON-OFF-ON
CAT# RS-146
$1.25 each
$1.35 each
$1.40 each
CW Switch. Fluorescent starter switch.
One pole is off-on-momentary on. The
other pole is null-on-momentary on.
Rated 3A 125Vac. Ivory rocker and bezel
with lamp symbol on rocker. Snap-mounts in 0.5" x
0.75" cut-out. 0.187"qc/ solder terminals. Prepped
with 12" wire leads with qc connectorsd. UL, CSA.
CAT# RS-215
4 for $1.00 • 100 for $15.00
DPST PADDLE SWITCH
NEW
Arrow England
#
PSP2SB
A
/
93RP-404.
SMK #BZ35. D.P.S.T., on-off rocker switch.
ON-OFF D.P.S.T.
Matte-black bezel (21 x 15mm) and rocker.
0.90" long white paddle
Rocker has embossed white symbols – and
switch rated at 15(6) amp
O which appear on edge of rocker. Snap250V. 1 1/2 HP 20A 250Vac ,
mounts into 20 x 13mm rectangular cut out.
Rated 6A/125Vac. 0.185” QC/solder terminals. UL, CSA. 3/4 HP 125Vac. Mounting tabs
CAT# RS-189 65¢ each • 100 for 50¢ each with holes 1.60" centers. Solder lugs. CSA, UL.
DPST ROCKER SWITCH
ON-OFF MINI ROCKER SWITCH
C & K D-Series. S.P.S.T. Rated 4A,
125VAC / 2A, 250VAC. Matte black
bezel and rocker with O-I, on-off
symbols in white. Snap-mounts in
13 x 19mm panel cutout. 0.187" qc/ solder
terminals, bent at 90 degrees for a lower
NEW
profile. UL, CSA.
CAT# RS-223 2 for $1.00
100 for 40¢ each
DPDT MOMENTARY BOTH
DIRECTIONS ROCKER SWITCH
Carling TIGM5L-6S-BL-NBL. D.P.D.T.
Momentary-OFF-Momentary.
Rated: 10A 250 Vac, 15A 125 vac
3/4 HP, 250 vac. Solder lugs.
44mm x 25mm glossy black bezel
and body, snap mounts into 38mm x
21mm cut out. Solder lugs. UL, CSA.
CAT# RS-210
CAT# RS-215R
$2.75 each
12V LIGHTED ROCKER SWITCHES,
ROUND S.P.S.T., on-off 12V lighted rocker
switch. Round body. Rated 16A (except LRS-29G,
10A). Can be wired to be always on, or when
contacts are closed. Solder or 0.187” qc terminals.
1
OFF
2
CAT# LRS-32
DPDT ON-OFF-(ON) ROCKER
SWITCH, PREPPED
On-Off-(Momentary-on) rocker switch.
Switch terminals are soldered to a pc
board. Should be relatively easy to
de-solder. Black plastic switch
snap-mounts into 22 x 30mm rectangular cut-out.
Switch rated 16A 125/250V.
50¢ each
CAT# LRS-30X (X=R, G, A, or B) $2.20 ea.
0.90” DIA. BEZEL,
12V INCANDESCENT LAMP
Lighted red rocker with on-off symbols.
Mounts in 0.8” diameter hole.
SPDT ON-OFF-ON
CAT# RS-211
S.P.S.T., on-off, surface-mount rocker
switches with LED indicators. Built-in resistors
for 12 Vdc operation. Surface mount switch
with threaded bushing with nut, conveniently
mounts in 0.48" dia. hole. Matte-black oval switch with
LED on one side of rocker. Above panel dimensions
are 1.22" x 0.78" x 0.63" high. 0.25" qc / solder terminals. Rated 20 A / 12 Vdc. Available with LEDs in 4
colors, red (R), green (G), amber (A), and blue (B).
S.P.S.T., ON-ON lighted paddle switch.
12 Vdc lighted red paddle. Snap-mounts in
20mm dia. hole. 0.187"qc/ solder terminals.
$1.15 each
$1.15 each
CAT# RS-179
75¢ each
12 VDC LED LIGHTED
ROCKERS (OVAL)
12V LIGHTED PADDLE SWITCH
ON-ON rocker switch rated 10A/ 125Vac.
Snap-mounts in round, 20mm dia. hole.
Black 23mm diameter bezel. Opaque
rocker looks like it should light, but doesn't.
0.187" qc/ solder terminals. UL, CSE, DVE.
S.P.D.T., center-off rocker switch.
Rated 16A @ 125Vac. Snap-mounts
into 26mm x 15mm rectangular
cutout. Black rocker and bezel.
0.25” QC/ solder terminals. White
lettering “1 – OFF – 2” etched in rocker.
12V LIGHTED ROCKER SWITCHES
CAT# LRS-35A
$2.00 each
$4.50 each
CAT# RS-214
CAT# RS-217
65¢ each
Same as above, but with larger,
amber LED.
SPDT ROCKER SWITCHES
Green
Red
CAT# RS-222
$1.85 each
same as above, but green,
10 Amps, no symbols.
CAT# LRS-29G
NEW
$2.00 each
0.90” DIA. BEZEL, ROCKER W/ LED
available with red, green, amber, aqua
or blue LED embedded in one side of
rocker. Built-in resistors allow LEDs to
light on 12 Vdc. Mounts in 0.8” dia. hole.
CAT# LRS-28X (X=R, G, A, AQ or B) $2.20 ea.
12V incandescent S.P.S.T. rocker.
0.65” diameter bezel, 0.45” diameter.
Red.Snap-mounts in 0.59” diameter hole.
Rated 6 amps. Solder loop terminals.
CAT# LRS-31
$1.95 each
15
120 VAC LIGHTED ROCKER SWITCH
S.P.S.T On-off Red lighted rocker switch.
On/Off symbols (- and O) printed
in white. Black body, bezel 1.25" x
0.55". Snap mounts in 1.10" x 0.42"
cutout. Current rating: 20A 125 Vac;
15A 250 Vac. 0.25" QC/solder terminals. TUV CE.
CAT# LRS-40
$1.95 each
2-POSITION SLIDE SWITCHES
MINI-SLIDE SWITCH, RIGHT-ANGLE
Mouser# 10SP013. Miniature S.P.D.T. on-on
slide switch. 13.3 x 6 x 13mm high
(includes slide and terminals). 0.5A /
50 Vdc. PC leads and two support tabs.
CAT# SSW-76
4 for $1.00 • 100 for 20¢ ea.
MINI-RT-ANGLE SLIDE SWITCH, SPDT
Alcoswitch # TSS11DG1RA.
Mini SPDT. Flush slider requires use of
fingernail or screwdriver to activate switch.
Switch face is 10 x 5mm. Body extends
10mm behind face. Rated 0.4VA. USA made.
CAT# SSW-61
3 for $1.00
DPDT MINI-SLIDE, RT. ANGLE
0.37” x 0.13” x 0.13” high. Horizontal
slide lever. PC leads on 0.1” centers.
CAT# SSW-45
4 for $1.00 • 100 for 20¢ ea.
ALCO MINI DPDT SLIDE SWITCH
PC pins. 12 x 12 x 8mm high.
CAT# SSW-81
65¢ each
DPDT ON-ON SLIDE SWITCH
DPDT slide switch. 4 Amp 125 Vac.
0.5 Amp 125 Vdc. 1.5 Amp 250 Vac.
22 x 14 x 19mm high. Tarnished PC pins.
UL, CSA.
CAT# SSW-83
3 for $1.00
DPDT MICRO SLIDE SWITCH
TE Connectivity # MMS22. Miniature DPDT
slide switch. 2mm slide travel. Contacts rated
100mA @ 30 Vdc. 11 x 7 x 8mm high. PC pins.
CAT# SSW-80 $1.00 each
ON-ON DPDT MINI SLIDE SWITCH
ON-ON D.P.D.T. switch with mounting
holes on 0.75" centers. Body size:
0.6" x 0.30". Solder-loop terminals.
CAT# SSW-77 4 for $1.00
100 for 20¢ each • 1000 for 12¢ each
3-POSITION SLIDE SWITCHES
ON-ON-ON
Each pole has four terminals,
two of which are connected in each position.
2-POLE, 3-POSITION
Mounting tabs on 1.41" centers.
4A @ 14V. Solder loop terminals. UL.
CAT# SSW-70
50¢ each • 10 or more 45¢ each
3-POLE, 3-POSITION
Mounting tabs on 1.0" centers.
3A @ 125 Vac, 0.5 A @ 125 Vdc.
Solder / PC pins. UL. CAT# SSW-68
16
TACTILE PUSH BUTTONS
MINI-TACTILE PUSHBUTTON
SWITCH, SURFACE MOUNT
S.P.S.T., normally-open miniature pushbutton.
6mm square body. Four surface mount leads on
4 x 8mm centers. CAT# MPB-43 3 for $1.00
100 for 29¢ each • 1000 for 23¢ each
TACTILE PUSHBUTTON W/ PLUNGER
S.P.S.T., normally-open, momentary
pushbutton. Plunger height is 13mm
above pc mounting surface. 0.24" square
body. Leads on 0.15" x 0.25" centers.
CAT# MPB-218 35¢ each
100 for 25¢ each
SURFACE-MOUNT
Alps #SKHUQB056A. Miniature surface
mount pushbutton switch. S.P.S.T., normally-open.
6.2 x 6.5mm. 3.1mm stem height. 0.25mm travel.
Contacts rated 50mA @ 12 Vdc. Tape-and-reel.
CAT# MPB-136 3 for $1.00 • 100 for 29¢ ea.
1000 for 23¢ each • 3000 for 15¢ each
SPST MINI RIGHT-ANGLE
TACTILE PUSHBUTTON
pushbutton. Rated 50 mA @ 12 Vdc.
Right-angle mounting. PC leads.
CAT# MPB-139 4 for $1.00
100 for 22¢ each
TACTILE SWITCH
Alps #SKEYAB028A. S.P.S.T., normallyopen. “Soft-feeling” rubberized pushbutton
for pc or breadboard mounting. 7.8 x 7.8 x 5mm.
1mm travel. Orange button on black base.
CAT# MPB-143 4 for $1.00
100 for $20.00
MOMENTARY
PUSHBUTTON SWITCHES
DPDT MOMENTARY MINI
PUSHBUTTON, PC MT.
ITT PVA series DPDT Momentary mini
pushbutton switch. Plastic body is
9mm x 9mm x 9mm excluding plunger.
3mm square plunger. PC terminals.
CAT# MPB-227
2 for $1.00 • 100 for 40¢ ea.
SUB-MINI PUSHBUTTON,
SPST NORMALLY-OPEN
Right angle sub-miniature S.P.S.T. momentary
N.O. pushbutton switch. Epoxy sealed.
4.7mm non-threaded bushing. Black plunger.
Rated: 0.4VA max. Gold-plated pc terminals plus
stabilizing pin.
CAT# MPB-237
MANUFACTURERS
We Purchase
Excess Inventories.
CALL, WRITE, E-MAIL
or FAX your list.
FAX YOUR ORDER 24 HOURS A DAY
(818) 781-2653
MOMENTARY N.O. MINI-SWITCH
S.P.S.T. miniature momentary pushbutton
switch. Push-on, release-off. Press-fit in
0.31" diameter chassis hole. 0.39" diameter
black bezel. Green button extends 0.29"
above mounting plane in off-position. Switch
body is 0.31" dia. x 0.5" long (excluding pc pins)
below mounting plane.
CAT# PB-159
NORMALLY-OPEN MOMENTARY
pushbutton switch rated 3A/ 125V.
10mm dia. red button. 14.5mm dia. x 7mm
high black bezel. Threaded bushing mounts
in 10mm diameter hole. Solder terminals.
CAT# PB-179 $1.00 each
SPST MOMENTARY PUSHBUTTONS
1/4" bushings and plastic button. Ideal for most
low current projects. Solder-loop terminals.
Normally open
CAT# MPB-1
CAT# MPB-1B
CAT# MPB-1BL
CAT# MPB-1G
CAT# MPB-1Y
CAT# MPB-1W
Red button
Black button
Blue button
Green button
Yellow button
White button
Flat
Dome
Heavy-duty metal
pushbutton switch.
Normally-open,
momentary action.
Threaded bushing
mounts in 0.75” diameter hole in panels up to 0.35”
thick. Screw-clamp terminals. Rated 4 A / 125 Vac.
Flat-top style. Nickel-plated button is flush with
bezel in open position. Bezel measures 0.86” dia.
x 0.05” high.
CAT# PB-144
$ 3.95 each
Dome style. Nickel-plated dome and bezel
measure 0.86” diameter x 0.12” high.
CAT# PB-143
$ 3.95 each
N.O. MOMENTARY
S.P.S.T. normally-open, momentary
pushbutton switch. Heavy-duty metal
plunger, suitable for foot switch
applications. 15/32” threaded bushing
mounts in panels up to 1/2" thick.
Solder-loop terms.
4 Amps / 125 Vac
10 Amps / 125 Vac
MOMENTARY PUSHBUTTONS
Normally-closed
CAT# MPB-5R
CAT# MPB-5
Red button
Black button
MOMENTARY PUSHBUTTONS
Rated 5A/120Vac, 2A/250Vac.
Removable 10mm diameter red
plastic cap. 6mm threaded bushing
mounting. Includes nuts and washers.
Solder terminals. UL.
S.P.D.T. CAT# MPB-174
D.P.D.T. CAT# MPB-175
NORMALLY-OPEN
MOMENTARY
$2.70 each
$3.00 each
JUMBO PUSHBUTTONS
Durable plastic S.P.D.T. momentary
pushbutton switch frequently found
in arcade games. Button operates a
3 Amp snap-action switch. Plunger
is 0.86" dia. Bezel is 1.33" dia.
Threaded bushing is 1.1" dia. and will
mount in panels up to 0.75" thick.
Includes large plastic mounting nut.
(On)-(On), heavy-duty pushbutton with
metal plunger and mounting bushing.
Ideal for foot-switch or hard physical use.
15/32” threaded bushing for panels up
to 0.5” thick. 0.4” diameter plunger.
Solder terminals. Rated 2A 250Vac.
SPDT
DPDT
3PDT
CAT# PB-174
CAT# PB-176
CAT# PB-237
$4.00 each
$4.80 each
$3.85 each
LARGE MOMENTARY
PUSHBUTTON SWITCH
Black plastic. Fairly rugged
S.P.S.T., normally-open switch,
possibly designed for gaming
purposes. 19.5mm dia. plunger
in a 29mm dia. x 20mm high case. Mounting holes
on 50mm centers. 0.187”qc/ solder terminals. Can
be surface mounted or mounted from behind panel
through 29.5mm diameter hole. Note: terminals
are tarnished but functional.
RED SWITCH
GREEN SWITCH CAT# PB-214 $3.75 each
YELLOW SWITCH CAT# PB-215 $3.75 each
10 for $1.00 each • 100 for 75¢ each
GAME SWITCH S.P.D.T.
MOMENTARY PUSHBUTTON
SPST N.O. PUSHBUTTON
Rugged momentary pushbutton
switch designed for games and other
repetitive applications. SPDT snapaction switch rated 5 Amps @
125/250 Vac. 1.31” dia. x 0.15” high
white bezel. 1.06” diameter threaded
plastic bushing with nut. Fits panels up
to 0.8” thick. 0.9” dia. opaque plastic plunger is
available in red (R), green (G), blue(B), and
amber(A). CAT# PB-9(color)
$3.00 each • 10 for $2.75 each
Single-pole, normally-open momentary switch.
Attractive and functional dome-shaped pushbutton.
0.70" dia. black plastic bezel. 0.45" button. Extends
0.3" above mounting plane. Threaded bushing
mounts in 0.52" dia. hole. Solder terminals.
Red Button
Black Button
Green Button
Blue Button
Yellow Button
CAT# PB-138
CAT# PB-139
CAT# PB-172G
CAT# PB-172B
CAT# PB-172Y
$1.50 each • 100 for $1.20 each
17
SPST N.O. MOMENTARY
Matte-black plastic pushbutton
switch. 16mm square pushbutton
in a 20mm square bezel. 13.5mm high.
44mm below panel depth. Press mounts in
12.5mm round hole. 0.25" qc/ solder terminals.
PUSHBUTTON WITH METAL BEZEL
S.P.S.T momentary pushbutton.
0.51" dia. plunger, 0.74" dia. metal
bezel. 0.62" diameter threaded bushing
mounts in panels up to 0.15" thick.
Solder lug terminals. 4A 125 Vac.
Normally-open
Normally-closed
Normally-open
Plunger
Red
Red
Blue
CAT#
PB-160
PB-145
PB-160BL
PUSH-ON PUSH-OFF SWITCHES
Rated 2A/ 250Vac. 6mm threaded bushing. 10mm
diameter red plastic cap. Solder-lug terminals.
MINI S.P.D.T.
CAT# MPB-176
$2.85 each
MINI D.P.D.T.
CAT# MPB-177
$3.15 each
HEAVY-DUTY PUSH-ON /
PUSH- OFF PUSHBUTTONS
Each
$1.75
$1.75
$1.75
SPECIAL - NORMALLY CLOSED
MOMENTARY PUSHBUTTON, RED
S.P.S.T. 0.51" dia.red plunger, 0.74" dia.
metal bezel. 0.62" dia, threaded bushing
mounts in panels up to 0.15" thick.
Solder lug terminals. 3A 125V. Good
switch for prototypes and projects.
Not recommended for frequent use.
CAT# PB-199
$1.00 each
PUSHBUTTON SWITCH,
MOMENTARY N.O.
S.P.S.T. momentary, normally-open
pushbutton switch. 0.4" diameter black
plastic plunger. 15/32" threaded bushing.
Equipped with knurled dress-nut and
standard hex-nut. 0.88" x 0.55" 0.43" body.
0.25" qc/ solder terminals. Rated 6A/120Vac,
3A/240Vac. UL.
10 for $1.30 each • 100 for $1.00 each
SPST MOMENTARY PUSHBUTTON,
NORMALLY-CLOSED
NEW
Judco #J188. Single pole
pushbutton switch. Normally-closed,
momentarily open. Rated 3A 125 Vac.
Black plastic body, button and threaded
bushing. 3/8 -27 threaded bushing w/ plastic
nut. 4" leads, pre-stripped. UL listed.
CAT# PB-200
$1.00 each
100 for 85¢ each
Ideal for footswitch applications. Metal
plunger. 15/32” threaded bushing mount.
Rated 2A/ 250Vac. Solder terms.
S.P.D.T.
D.P.D.T.
3.P.D.T.
CAT# PB-173
CAT# PB-175
CAT# PB-236
$3.75 each
$4.50 each
$3.75 each
SPECIAL - SPST PUSH-ON /
PUSH-OFF SWITCH
Rated 2 Amps. Black plunger and bezel.
10mm dia. threaded bushing. Solder terminals.
15mm dia. x 7mm high bezel. Good switch for
prototypes and projects. Not recommended for
frequent use.
CAT# PB-197
S.P.S.T. ON/OFF
S.P.S.T., on-off, push-on/push-off switch
rated 3A/ 125V. 10mm diameter red button.
14.5mm diameter x 7mm high black bezel.
Threaded bushing mounts in 10mm diameter
hole. Solder terminals.
10 for $1.20 each • 100 for $1.05 each
PUSH-ON / PUSH-OFF
Interbar 3030 series. White plastic
push-on/push-off switch. S.P.S.T.
Rated 1A/ 250V. 10mm threaded
mounting bushing. Screw terminals.
Includes black plastic nut. UL.
CAT# PB-231
60¢ ea. • 100 for 45¢ ea.
DPDT PUSH ON/OFF SWITCH
Alternating; push one side and the
other pops up. Snap-mounts into a
0.86" x 1.20" chassis cutout.
Pushbuttons are white plastic,
1.31" x 1.03" and stand 0.7" above
mounting plane. Contacts appear to be
6 Amps or better. 0.25" qc terminals.
MOMENTARY LIGHTED PUSHBUTTON SWITCHES
CAT# PB-233
With polycarbonate 1” round lens
assembly, designed for displays and
games. The rugged S.P.D.T snap-action
switch assembly is designed for
millions of operations.
Rated 5 Amps @ 125/250 Vac.
The assembly is lighted with a
replaceable 12 Volt, 3 Watt, #161 wedge-base
lamp. 1.25” dia. x 0.3” high matte black plastic
bezel. 0.93” dia. threaded bushing with a plastic nut
mounts in panels up to 0.70” thick.
Lens colors: red (R), green (G), blue (B) & white (W).
Judco model# J-188A-1. SPST, push-on
push-off, plastic pushbutton. Contacts
rated 6 amps @ 125 Vac. Black body,
actuator and panel nut. 3/8-27 threaded bushing. 4 1/2" stranded wire pigtails. UL listed.
For moisture-resistant cap/nut see CAT# WPC-3.
CAT# LPS-1(color)
$ 3.75 each • 10 for $ 3.45 each
18
$1.15 ea. • 10 for $1.00 ea.
PUSHBUTTON SWITCH
CAT# PB-13
$1.85 ea. • 100 for $1.50 ea.
BLACK RUBBER BOOT/CAP
Fits snugly over 13mm diameter knurled
nut on Judco pushbutton switches.
Prevents dust and moisture contamination.
Fits CAT# PB-13
CAT# WPC-3
FAX YOUR ORDER 24 HOURS A DAY
(818) 781-2653
DPST PUSH-ON/PUSH-OFF SWITCH
Matsushita (Panasonic) SS-13,
Rated 5A/40A 250 Vac,
3A 250 Vac. 0.15” square plunger.
Solder-lug terminals. UL, CSA, DVE.
CAT# PB-232 75¢ each
SPST PUSH-ON / PUSH-OFF
Judco #J-977 Mini Flat Pac. Two terminal,
push-on/push-off switch. Rated 300mA/
12Vdc. 0.472" square x 0.268" thick (0.366"
with pushbutton). PC leads on 0.276" centers.
CAT# PB-193
$1.00 each • 10 for 90¢ each
PUSH-ON/PUSH-OFF
SWITCH, SPECIAL
Judco SPST, push-on/push-off
switch. Solid tactile, snap-action
feel. Solder-lug terminals.
Note: Switch was for a custom application.
The 3/8-27 threaded bushing is only 1/8” long.
With the knurled plastic nut attached, the switch
can be used in a 1/16” thick panel, or a thinner
panel if a washer or spacer is used. Also, the
plunger is terminated with a 1/8” (3mm) diameter
tip configured for a custom cap (not included).
CAT# PB-189 2 for $1.00 • 100 for 40¢ each
MOMENTARY LIGHTED PUSHBUTTON SWITCHES
S.P.S.T., push-on/push-off lighted switch
with a rubber boot to protect from dust
and moisture. 19mm diameter red lens.
Rubber boot dia., 26mm. Snap-mounts
into 20mm (0.8") dia. hole. 24mm, behindpanel depth. 0.18" qc/ solder terminals.
110 Vac
12 Vdc
CAT# PB-202
CAT# PB-203
$3.65 each
$3.75 each
ROTARY SWITCHES
ENCLOSED BODY
6mm diameter flatted shaft.
9mm threaded bushing.
10Amp/ 125VAC, 6 Amp/ 250V
T85. Plastic body, shaft and bushing.
Body, 28.5mm diameter x 11.5mm.
MINI-ROTARY BCD SWITCH
Alco # DRM10E-04. 10 position
BCD rotary switch. Red knurled,
slotted shaft with white line. Body,
10 x 10 x 6mm. Contacts, 0.4VA @ 20Vdc.
50 mOhm contact resistance. 6 pc pins.
DIP configuration.
CAT# RDIP-1
$1.00 each
REED SWITCHES, NORMALLY-OPEN
Single-pole, normally-open magnetic reed switches.
Hermetically-sealed, glass body.
Fujitsu# N570-0189-T157
Body: 5mm dia x 48mm long.
Overall length w/ leads: 82mm.
CAT# RSW-35 $1.25 each
10 for $1.10 each • 100 for $0.95 each
Coto # RI-01C
Body: 1.8mm dia x 13.5mm long.
Overall length w/ leads: 21mm.
10 for $1.10 each • 100 for $0.95 each
ORD2201 1A SWITCH
Designed for current of 1A DC and 0.7A AC.
2.75mm dia x 21.0mm long.
10 for $1.10 each • 100 for $0.95 each
SPDT REED SWITCH
Hamlin
Body: 4.7mm dia x 35mm long.
Overall length w leads: 85mm
CAT# RSW-40
$1.50 ea. • 10 for $1.25 ea.
DIP SWITCHES
2 POSITION
Piano style.
CAT# DWS-2 65¢ each
4 POSITION
Low profile style.
CAT# DWS-4S
6 POSITION
$1.00 each
Piano style.
CAT# DWS-6P 75¢ each
1-POLE, 2-POSITION
7 POSITION
1-POLE, 3-POSITION
CAT# DWS-7P 85¢ each
1-POLE, 4-POSITION
8 POSITION
CAT# DWS-8
1-POLE, 6-POSITION
10 POSITION
CAT# RSW-610
Surface mount.
$1.95 each
Piano style.
Standard style.
$1.35 each
CAT# DWS-10SM
WAFER STYLE
6mm diameter knurled, split shaft.
9mm diameter threaded bushing.
0.5A/ 125Vac.
2-POLE, 6-POSITION
$1.65 each
12 POSITION
Standard style.
CAT# DWS-12
$1.45 each
MERCURY TILT SWITCH
1-POLE, 12 POSITION - Solder-lug terminals.
Single-pole, plastic encapsulated
tilt switch with 28" wire leads.
Circuit is open when switch is horizontal or leads
are pointing down. Circuit closes when leads are
more than approximately 25° above horizontal.
1.47" x 0.35" x 0.39". Double stick tape on back.
CAT# MS-23
1-POLE, 11-POSITION - PC pin terminals.
Can be wrapped and soldered.
CAT# RSW-39
$1.45 each
$5.50 each
19
AUTO PIN SWITCHES
ALARM SWITCHES
SPDT
Can be used on normally open
or normally closed loop systems.
Switch measures 2” long X 3/8”.
CAT# MS-7 $4.50 each
10 for $4.25 each
PRESS-FIT MAGNET SWITCH
Press-fit into 3/8" hole. Ideal for windows
and doors. For normally closed systems.
0.75" operating gap. U.L. listed.
Standard 1.93" long pin switch for
auto security and lights.
CAT# PSW-2
ADJUSTABLE HOOD /
DOOR PIN SWITCH
2-3/4" polycarbonate pin switch. Pin dimensions:
8.6 mm dia. x 19.5 mm H. Shaft diameter: 7.94 mm
(5/16"). Accepts 1/4" female disconnect.
CAT# PSW-17
For closed loop alarm systems.
Switch is closed when magnet is
near. Cover hides screw terminals.
Off-white switch and magnet. UL.
CAT# MS-14 $4.25 each • 10 for $40.50
$1.75 each
THERMAL SWITCHES
CAT# MS-11 $3.50 per set
10 sets for $32.50
STANDARD MAGNETIC
PROXIMITY SWITCH
$1.00 each • 10 for $9.00
NORMALLY-CLOSED
Prevent overheating by opening circuit at rated
temperature. Open upon rise to rated temperature.
Auto-reset when temperature drops.
75°C (167°F) Closes 50°C (122°F)
Klixon 9700K251-48
Rated 13A/250 Vac. 3” lead length.
PLUNGER-TYPE MAGNETIC SWITCH
CAT# THSW-167
Seco-Larm® "Enforcer" #SM-4301-TQ.
White, normally-closed plunger
switch. Circuit is open when plunger
is extended from housing. Plunger travel
is 1/4". Magnet and reed switch contained in housing. Quick-connect screw
terminals for 22-16 AWG wire. Spacer
and screws included. cULus.
75°C (167°F)
CAT# MS-42
$4.95 each
ROLLER-BALL SWITCH
Seco-Larm® "Enforcer" # SM-4302-LQ/W.
White, normally-closed roller-ball
switch. Circuit is open when ball is
extended from housing. 1/4" travel.
Magnet and reed switch contained in
housing. 18" wire leads. Spacer and
screws included. cULus.
CAT# MS-43
Ying Long # YL-2. White plastic
on-off thumbwheel switch for
SPT-1 zip cord. No soldering
necessary. Simply cut out a small
portion of one side of the zip
cord, and screw the two halves of the switch
together over the cord. Rated: 6 A 125 vac,
3 A 250 vac, 3A 125V. UL, CSA listed.
FLOAT SWITCH WITH
INTEGRATED THERMISTOR
Gems Sensors 222727
Horizontal liquid level float
switch. For sensing rising or
falling liquid levels (normally open or normally
closed). Hermetically sealed magnet and reed
switch for accurate, reliable long-life operation. Integrated 10K ohm NTC thermistor allows monitoring
of liquid temperature as well. Threaded 13/16" male
Nylon stem. Polypropylene float, 2.4" long from
hinge to end. Four 10" leads, two for switch (red)
and two for thermistor (green).
CAT# FLW-1 $5.00 each
10 for $4.75 each
20
Klixon 7A M202
0.70” x 0.41” x 0.16”. 1.75” leads. UL, CSA, KEMA.
CAT# THSW-75
$1.00 ea. • 10 for 85¢ ea.
95°C (203°F)
Klixon 7AM026
Rated 20A / 16Vdc, 22A/ 115 Vac
CAT# THSW-95
$1.00 ea. • 10 for 85¢ ea.
105°C (221°F)
3TMH01 L105-20C Ceramic
body with 16mm diameter
metal face. Removed from new equipment with
short, heat-resistant cloth covered leads.
CAT# THSW-60
$1.50 each
$5.35 each
IN-LINE THUMBWHEEL SWITCH
FOR SPT-1 CORD
CAT# SWT-2
75¢ each
NORMALLY-OPEN
Closes upon rise to rated temperature
110ºC / 230ºF
Uchiya OP61G. Auto-reset. For 10-500mA current.
0.25” x 0.61” x 0.12. Solid bare wire leads.
CAT# THSW-230
50¢ each
100ºC / 212ºF
Limitor #T160.
0.62” x 0.31” x 0.15”. Stranded wire leads.
CAT# THSW-212 50¢ each
THERMAL FUSES
Sefuse SF/E series Thermal Fuses. One-time use devices that open circuit upon rise to rated temperature.
Protect heat-sensitive equipment and appliances from
overheating. 4mm dia. 66mm long including leads.
Rated 15/10A resistive, 250ACV. UL, CSA, DVE.
CAT#
SEFUSE#
Operating Temp.
TCF-94
TCF-121
TCF-157
TCF-192
TCF-240
SF91E
SF119E
SF152E
SF188E
SF240E
94C°
121C°
157C°
192C°
240C°
All Thermal Fuses 75¢ each
VISIT OUR WEBSITE - WWW.ALLELECTRONICS.COM

Layout 1 (Page 1)

Transcription

Similar documents