the MicroGroup® Advantage

Transcription

rials – 48 H
ou
rs
o
r
po
va l
Com
ves
ss
Tu
e
b
n
g
d
n
a
te
Ma
L
i
Stainless Steel Tubing and Precision Manufacturing
Since 1971!
d
i
n
a
g
s
s
nt
an
d
ne
n
as
se
mb
Fi
tt
lies
1-800-ALL-TUBE (255-8823)
www.microgroup.com
7 Million feet of stainless s teel t ubing in-stock!
IF IT’S ABOUT LEAD TIME, IT’S ABOUT MICROGROUP
General Information
Ordering/Service
Sales Hours: 8:00 AM - 7:00 PM EST (Monday - Thursday)
8:00 AM - 5:00 PM EST (Friday)
Stainless Steel Tubing 3
100% Burr-Free
Cutting
Precision
Manufacturing
Services
MicroGroup, Inc.
7 Industrial Park Rd.
Medway, MA 02053
Tel: 800-255-8823/508-533-4925
Fax: 508-533-5691
[email protected]
www.microgroup.com
Five Reasons to Partner with MicroGroup
15
1) Quality & Regulatory
MicroGroup is quality focused, top to bottom, integrating lean
manufacturing practices. Also, MicroGroup is ISO 9001:2000
and ISO 9001:2008.
2) Full-Service
Three facilities – one source for engineering assistance, small
diameter tubing materials, full contract manufacturing/assembly
services and supply chain management.
17
Stainless Steel Tube
& Hose Fittings
25
3) Fast Delivery
MicroGroup delivers tubing materials in days, not weeks. Also,
our extensive equipment and experienced technicians in three
facilities assure fast turnarounds for parts and finished devices.
4) Technical Support/Customer Service
Our sales engineers and account representatives are specialists with years of hands-on medical experience. Fast quotes,
technical assistance, job status, whatever – MicroGroup support teams are ready to help.
5) Easy to Do Business With!
Expanded customer support hours, on-line ordering and RFQ’s,
and flexible payment options guarantee a pleasant ordering
experience.
Miniature Fittings
& Valves
29
Specialty Small Tools 44
2
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
OR WWW.MICROGROUP.COM
SPEED – the MicroGroup® Advantage
Most orders shipped
within 24 HOURS!
Stainless Steel
Tubing & Materials
Fast Turnaround!
TUBING
< HYPODERMIC
< FRACTIONAL
< METRIC
< MEDICAL
< PIPE
< ODD - LOT
BAR & ROD
WIRE
www.microgroup.com
• RFQ’s
• Ordering
• Product Updates
• Technical Specifications
• And More!
1-800-255-8823 • www.microgroup.com
About Tubing
Item Code Example
The following example is a guideline to assist you in the ordering
process. Your MicroGroup representative can help you further with this
process if necessary.
Category
Nominal O.D.
Nominal Wall
304 F1 0032 x 006 SL
Material
Tolerance Level
Manufacture Type
The item code was initially developed to enable our employees and
computer systems to accurately specify and control the ALL-TUBE
inventory. It has been so successful that we will use it as an outline.
Please use the “Item Code” where possible.
Material:
Specify the grade of material using any combination of up to four text or
numeric characters (i.e. 304, Ti2, 6061).
Category:
Select one letter from the list below to specify category.
F Fractional
X Shape
H Hypodermic
B Bar/Wire
M Metric
S Foil & Sheet
Q Medical Quality
Z Oddlot/Surplus Tubing
P Pipe
Tubing Can Be Provided in the
Following Configurations
Random Lengths:
2' to 24' straight lengths generally available unless otherwise specified.
Ends are crimped shut unless otherwise specified.
Tolerance Level:
Tolerance Level is only for fractional tubing, and can be either 1 or 2.
Tolerance bands for 1 and 2 are in the table below.
Tolerance Table: Fractional Tubing
Tolerances
Straightness:
Although every effort is made to insure the quality of straightness,
because of shipping and handling, MicroGroup cannot guarantee off the
shelf tubing to be straight to industry standards. Please notify your sales
representative if you have a straightness specification.
Coils:
Coils of 1,000 feet or more can be produced in welded and seamless.
Call for availability.
Cut-Off:
Commercial practice of Cut-Off tubing does not include deburring.
Tolerance
Wall
Tolerance
OD
(Inches)
(Inches)
(%)
(Inches)
(%)
< 3/32
3/32 to < 3/16
3/16 to < 1/2
1/2 to < 1-1/2
1-1/2 to < 3-1/2
±.005
±.005
±.005
±.005
±.010
±15%
±15%
±15%
±10%
±10%
+.002/-.000
+.003/-.000
+.004/-.000
+.005/-.000
NA
±10%
±10%
±10%
±10%
NA
Nominal OD:
Specify nominal OD using two to four digits (i.e. .032"= 0032, 5mm = 05).
Mfg. Type: WD or SL
Specify if Welded (WD) or Seamless (SL) construction is required.
Order Online!
Non-Stock Sizes
The industry’s best web site just got better.
MicroGroup’s Phase III site is up and running and ready
to accommodate your buying requirements!
www.microgroup.com
AND
PERSONAL SERVICE
Tolerance
Wall
Nominal Wall:
Specifying Wall is required for most sizes and consists of three digits
(i.e. .006"= 006, .035"= 035).
www.microgroup.com
PROMPT
2-Close Tol.
Tolerance
OD
By Sign:
Fractional, metric and medical tubing use the X symbol to separate OD and
wall characters. This is not required for hypodermic, pipe, bar and wire.
Cut and Deburred:
Commercial practice includes burr-free ends.
4
1-Standard Tol.
Tube Size
OD
Stock tubing is typically manufactured to OD and wall dimensions. Nonstock tubing sizes can be manufactured to your choice of either OD and
ID or ID and wall. Please consult your MicroGroup representative for
additional information.
AT
800-255-8823
Materials Selection
Prototypes
MicroGroup inventories one of the largest selections of metal tubing and
bar material available anywhere. Detailed below is a comprehensive list
of what we carry, however, if you don’t see what you need, call us and
we’ll obtain it in a timely basis.
Stainless Steels
303 ...................................................................303 Stainless Steel
304 ...................................................................304 Stainless Steel
304L ...............................................................304L Stainless Steel
305 ...................................................................305 Stainless Steel
309 ...................................................................309 Stainless Steel
310 ...................................................................310 Stainless Steel
316 ...................................................................316 Stainless Steel
316L ...............................................................316L Stainless Steel
317 ...................................................................317 Stainless Steel
321 ...................................................................321 Stainless Steel
347 ...................................................................347 Stainless Steel
405 ...................................................................405 Stainless Steel
410 ...................................................................410 Stainless Steel
416 ...................................................................416 Stainless Steel
430 ...................................................................430 Stainless Steel
430T..............................................................430Ti Stainless Steel
446 ...................................................................446 Stainless Steel
16-6 ..........................................................16-6 PH Stainless Steel
17-7 ..........................................................17-7 PH Stainless Steel
2169 ................................................21Cr-6Ni-9Mn Stainless Steel
A286 .............................................................A-286 Stainless Steel
C20 .....................................................................Carpenter-20® (4)
Production
Nickel and Nickel Alloys
200..............................................................Nickel 200 (“A” Nickel)
201 ...............................................Nickel 201 (Low Carbon Nickel)
211 ..............................................................Nickel 211 (“D” Nickel)
270 .................................................................................Nickel 270
301 ..........................................................Duranickel® Alloy 301 (1)
400 ....................................................Monel® Alloy 400 (Monel) (1)
404 .......................................................................Monel® Alloy 404
500...........................................Monel® Alloy K-500 (“K” Monel) (1)
600................................................................Inconel® Alloy 600 (1)
601................................................................Inconel® Alloy 601 (1)
625................................................................Inconel® Alloy 625 (1)
702................................................................Inconel® Alloy 702 (1)
718................................................................Inconel® Alloy 718 (1)
800................................................................Incoloy® Alloy 800 (1)
825 .............................................................Alloy 825 (Incoloy)® (1)
902 ..........................................NI-SPAN ALLOY® 902 (Ni-Span C)
8020..............................................................................Alloy 80-20
C276 ..........................................................*Hastelloy® Alloy C-276
7030.....................................................................30% Cupronickel
HX ......................................................................................Alloy X®
L605..............................................................................Alloy L-605
Wasp ........................................................................Waspaloy® (3)
X750..........................................................Inconel Alloy X-750® (1)
Nickel-Iron Alloys
NI36 ..............................................................36% Nickel-Iron Alloy
2917 .................................................................Alloy 29-17 (Kovar)
Other Materials and Alloys
Ti2............................................................Unalloyed Titanium A-40
Ti9..............................................................Titanium Alloy 3AI-2.5V
Ti5.................................................................Titanium Alloy 6AI-4V
Mo ..............................................................................Molybdenum
6061 .......................................................................6061 Aluminum
101 ...............................................................................101 Copper
122 ...............................................................................122 Copper
360..................................................................................360 Brass
260..................................................................................260 Brass
*Hastelloy® is a registered trademark of Haynes International, Inc.
(1) Inco Alloys International
(3) United Technologies Inc. Permission of use granted to Haynes
International.
(4) Carpenter Steel Corporation.
From materials to manufacturing and final assemblies, let MicroGroup be your one-stop source.
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
5
Stock Hypodermic Tubing
T304
Description: Often referred to as “seamless” because of its smooth
appearance, hypo tubing is welded and drawn to tight O.D. and I.D. tolerances. Hypotubing is stocked in grades 304 & 316 stainless steel in the
full hard condition.
Gage
Size
OD
Nom
Wall
Nom
ID GGN
Nom 196
6RW
6TW
6X
6.5
7RW
7TW
7X
7XX
7.5
8RW
8TW
8XX
8.5
9RW
9TW
9XX
9.5
10RW
10TW
10X
10.5
11RW
11TW
11X
11XX
11.5
12H
12RW
12TW
12X
12XX
12.5
13RW
13TW
13X
13XX
13.5
14XH
14H
14RW
14M
14TW
14XX
14.5
15RW
15TW
15X
15H
15.5
16RW
16TW
16X
16XX
16H
16.5
17RW
17TW
.2030
.2030
.2030
.1880
.1800
.1800
.1800
.1800
.1720
.1650
.1650
.1650
.1560
.1480
.1480
.1480
.1410
.1340
.1340
.1340
.1260
.1200
.1200
.1200
.1200
.1150
.1090
.1090
.1090
.1090
.1090
.1000
.0950
.0950
.0950
.0950
.0890
.0830
.0830
.0830
.0830
.0830
.0830
.0780
.0720
.0720
.0720
.0720
.0680
.0650
.0650
.0650
.0650
.0650
.0620
.0590
.0590
.015
.010
.007
.010
.015
.010
.007
.004
.011
.015
.010
.007
.010
.015
.010
.007
.011
.014
.010
.008
.010
.013
.010
.007
.004
.010
.016
.012
.009
.006
.005
.009
.012
.009
.005
.003
.009
.022
.017
.010
.008
.006
.003
.008
.009
.006
.005
.011
.007
.009
.006
.004
.003
.016
.005
.009
.007
.173
.183
.189
.168
.150
.160
.166
.173
.150
.135
.145
.150
.136
.118
.128
.135
.119
.106
.114
.118
.106
.094
.100
.106
.112
.095
.077
.085
.091
.097
.100
.082
.071
.077
.085
.090
.071
.039
.049
.063
.068
.072
.077
.063
.054
.060
.063
.050
.054
.047
.053
.057
.060
.033
.052
.041
.046
Y
Y
Y
Y
Y
-
T316
Application: This wide selection of economical tubing is ideal for medical
and industrial components that require strength, uniformity, and corrosion
resistance. It is not manufactured for pressure service. All sizes are
stocked for quick delivery.
OD
Max/Min
ID
Max/Min
T304
Item #
T316
Item #
Gage
Size
OD
Nom
Wall
Nom
ID GGN
Nom 196
.2040/.2020
.2040/.2020
.2040/.2020
.1890/.1870
.1810/.1790
.1810/.1790
.1810/.1790
.1810/.1790
.1730/.1710
.1660/.1640
.1660/.1640
.1660/.1640
.1570/.1550
.1490/.1470
.1490/.1470
.1490/.1470
.1420/.1400
.1350/.1330
.1350/.1330
.1350/.1330
.1270/.1250
.1210/.1190
.1210/.1190
.1210/.1190
.1210/.1190
.1160/.1140
.1100/.1080
.1100/.1080
.1100/.1080
.1100/.1080
.1100/.1080
.1010/.0990
.0960/.0940
.0960/.0940
.0960/.0940
.0960/.0940
.0900/.0880
.0840/.0820
.0840/.0820
.0840/.0820
.0840/.0820
.0840/.0820
.0840/.0820
.0790/.0770
.0725/.0715
.0725/.0715
.0725/.0715
.0725/.0715
.0685/.0675
.0655/.0645
.0655/.0645
.0655/.0645
.0655/.0645
.0655/.0645
.0625/.0615
.0595/.0585
.0595/.0585
.1760/.1700
.1850/.1810
.1910/.1870
.1710/.1650
.1530/.1470
.1620/.1580
.1680/.1640
.1740/.1720
.1530/.1470
.1380/.1320
.1470/.1430
.1530/.1475
.1390/.1330
.1210/.1150
.1300/.1260
.1370/.1330
.1210/.1170
.1080/.1040
.1160/.1120
.1200/.1165
.1080/.1040
.0960/.0920
.1020/.0980
.1080/.1040
.1140/.1100
.0960/.0930
.0790/.0750
.0870/.0830
.0930/.0890
.0990/.0950
.1010/.0990
.0840/.0800
.0730/.0690
.0790/.0750
.0860/.0840
.0910/.0890
.0730/.0690
.0410/.0370
.0510/.0470
.0650/.0610
.0690/.0660
.0730/.0700
.0780/.0760
.0640/.0620
.0555/.0525
.0615/.0585
.0640/.0620
.0520/.0480
.0555/.0525
.0485/.0455
.0545/.0515
.0580/.0550
.0610/.0585
.0350/.0310
.0535/.0505
.0425/.0395
.0475/.0445
304H06RW
304H06TW
304H06X
304H06.5
304H07RW
304H07TW
304H07X
304H07XX
304H07.5
304H08RW
304H08TW
304H08XX
304H08.5
304H09RW
304H09TW
304H09XX
304H09.5
304H10RW
304H10TW
304H10X
304H10.5
304H11RW
304H11TW
304H11X
304H11XX
304H11.5
304H12H
304H12RW
304H12TW
304H12X
304H12XX
304H12.5
304H13RW
304H13TW
304H13X
304H13XX
304H13.5
304H14XH
304H14H
304H14RW
304H14M
304H14TW
304H14XX
304H14.5
304H15RW
304H15TW
304H15X
304H15H
304H15.5
304H16RW
304H16TW
304H16X
304H16XX
304H16H
304H16.5
304H17RW
304H17TW
316H06RW
316H06TW
17X
17XX
17S
17SX
17H
17.5
18RW
18S
18TW
18XX
18H
18.5
19RW
19TW
19X
19XX
19H
19.5
20RW
20TW
20X
20XX
20.5
21H
21RW
21TW
21XX
21.5
22RW
22TW
22XX
22X
22XH
22.5
23RW
23TW
23XX
23.5
24RW
24TW
24XX
24.5
25RW
25TW
25XX
25.5
26RW
27RW
28RW
29RW
30XH
30H
30RW
31RW
32RW
33RW
34RW
.0590
.0590
.0580
.0580
.0590
.0560
.0500
.0500
.0500
.0500
.0500
.0460
.0425
.0425
.0425
.0425
.0425
.0390
.0355
.0355
.0355
.0355
.0340
.0320
.0320
.0320
.0320
.0300
.0280
.0280
.0280
.0280
.0280
.0260
.0250
.0250
.0250
.0230
.0220
.0220
.0220
.0210
.0200
.0200
.0200
.0190
.0180
.0160
.0140
.0130
.0120
.0120
.0120
.0100
.0090
.0080
.0060
.004
.002
.008
.004
.010
.005
.009
.006
.004
.003
.010
.006
.008
.005
.004
.003
.010
.006
.006
.005
.004
.003
.004
.008
.006
.005
.002
.003
.006
.004
.002
.003
.011
.003
.006
.004
.002
.003
.005
.004
.003
.002
.005
.004
.002
.002
.004
.004
.003
.003
.004
.004
.003
.002
.002
.002
.002
.052
.054
.042
.050
.039
.046
.033
.038
.042
.045
.030
.034
.028
.033
.035
.038
.023
.027
.024
.026
.028
.031
.027
.017
.020
.023
.029
.024
.016
.020
.024
.022
.007
.020
.013
.017
.020
.017
.012
.014
.016
.016
.010
.012
.016
.014
.010
.008
.007
.007
.003
.004
.006
.005
.004
.004
.002
316H07RW
316H08RW
316H09RW
316H09TW
316H10RW
316H10TW
316H11RW
316H11TW
316H12RW
316H12TW
316H13RW
316H13TW
316H14RW
316H14TW
316H15RW
316H15TW
316H16RW
316H16TW
316H16H
316H16.5
316H17RW
316H17TW
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
-
OD
Max/Min
ID
Max/Min
T304
Item #
.0595/.0585
.0595/.0585
.0585/.0575
.0585/.0575
.0595/.0585
.0565/.0555
.0505/.0495
.0505/.0495
.0505/.0495
.0505/.0495
.0505/.0495
.0465/.0455
.0430/.0420
.0430/.0420
.0430/.0420
.0430/.0420
.0430/.0420
.0395/.0385
.0360/.0355
.0360/.0355
.0360/.0355
.0360/.0355
.0345/.0340
.0325/.0320
.0325/.0320
.0325/.0320
.0325/.0320
.0305/.0300
.0285/.0280
.0285/.0280
.0285/.0280
.0285/.0280
.0285/.0280
.0265/.0260
.0255/.0250
.0255/.0250
.0255/.0250
.0235/.0230
.0225/.0220
.0225/.0220
.0225/.0220
.0215/.0210
.0205/.0200
.0205/.0200
.0205/.0200
.0195/.0190
.0185/.0180
.0165/.0160
.0145/.0140
.0135/.0130
.0125/.0115
.0125/.0120
.0125/.0120
.0105/.0100
.0095/.0090
.0085/.0080
.0065/.0060
.0530/.0510
.0550/.0535
.0435/.0405
.0510/.0490
.0410/.0370
.0475/.0445
.0345/.0315
.0395/.0365
.0430/.0410
.0460/.0440
.0320/.0280
.0355/.0325
.0290/.0260
.0335/.0315
.0360/.0340
.0385/.0365
.0240/.0210
.0285/.0255
.0245/.0230
.0265/.0250
.0285/.0270
.0315/.0295
.0275/.0255
.0180/.0150
.0210/.0195
.0240/.0220
.0295/.0280
.0245/.0230
.0170/.0155
.0205/.0190
.0240/.0230
.0225/.0210
.0090/.0050
.0210/.0195
.0140/.0125
.0180/.0165
.0210/.0195
.0180/.0165
.0130/.0115
.0150/.0135
.0170/.0155
.0170/.0155
.0110/.0095
.0130/.0115
.0170/.0155
.0150/.0135
.0110/.0095
.0090/.0075
.0080/.0065
.0080/.0065
.0040/.0020
.0050/.0035
.0070/.0055
.0060/.0045
.0050/.0035
.0050/.0035
.0030/.0015
304H17X
304H17XX
304H17S
304H17SX
304H17H
304H17.5
304H18RW
304H18S
304H18TW
304H18XX
304H18H
304H18.5
304H19RW
304H19TW
304H19X
304H19XX
304H19H
304H19.5
304H20RW
304H20TW
304H20X
304H20XX
304H20.5
304H21H
304H21RW
304H21TW
304H21XX
304H21.5
304H22RW
304H22TW
304H22XX
304H22X
304H22XH
304H22.5
304H23RW
304H23TW
304H23XX
304H23.5
304H24RW
304H24TW
304H24XX
304H24.5
304H25RW
304H25TW
304H25XX
304H25.5
304H26RW
304H27RW
304H28RW
304H29RW
304H30XH
304H30H
304H30RW
304H31RW
304H32RW
304H33RW
304H34RW
T316
Item #
316H17S
316H18RW
316H18S
316H18TW
316H19RW
316H19TW
316H20RW
316H20TW
316H21RW
316H21TW
316H22RW
316H22TW
316H23RW
316H23TW
316H24RW
316H24TW
316H25RW
316H25TW
316H26RW
316H27RW
316H28RW
316H29RW
316H30RW
All dimensions are measured in inches.
Please contact our sales office regarding availability. Some items may not be available for immediate delivery.
The HYPO tables on this page have been revised to address the
inconsistency of past “standards” which vary by vendor. MicroGroup
has attempted to meet as many of these old varied standards as
possible in these new tables. Please verify your older prints.
Although every effort has been made to ensure accuracy, no
guarantee is granted or implied. Unlike other tubing and pipe sizes –
Hypodermic tubing is specified by a Gage number which determines
OD and ID of the tube – Not the WALL thickness.
How to Specify Hypodermic Tubing
304 H 12RW
Material
Category
Gauge Size
6
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
T304
Stock Fractional Tubing
T316
Description: “Fractional” tubing starts at 1/32" O.D. and continues in
increments of 1/32" (i.e. 1/16", 3/32", 1/8", 5/32", 3/16" etc.) or
(1/16", 3/8", 7/16", 1/2", 9/16" etc.). Available in seamless or welded
and drawn construction, fractional tubing is often used in commercial
applications that require corrosion resistance and good strength. Also
available in other stainless and nickel alloy grades (i.e. 321, 600 etc.).
Normally available in commercial specifications (i.e. ASTM-A-269);
Occasionally available in other specs. (i.e. Mil-T-8504, AMS-5570).
Primarily stocked in annealed temper.
OD
Nom
Wall
Nom
ID Est Wt
Nom #/Ft
1/32"
.0313
.79 mm
1/16"
.0625
1.59mm
.006
.010
.019
.011
.006
.010
.016
.020
.023
.026
.028
.006
.010
.016
.020
.028
.035
.006
.010
.012
.016
.020
.025
.028
.032
.035
.042
.049
.006
.010
.016
.020
.028
.035
.049
.006
.010
.016
.020
.028
.035
.049
.065
.006
.010
.016
.020
.028
.035
.049
.006
.010
.012
.016
.020
.028
.032
.035
.042
.049
.058
.065
.083
.095
.006
.010
.016
.020
.028
.035
.051
.043
.031
.023
.017
.011
.007
.082
.074
.062
.054
.038
.024
.113
.105
.101
.093
.085
.075
.069
.061
.055
.041
.027
.144
.136
.124
.116
.100
.086
.058
.176
.168
.156
.148
.132
.118
.090
.058
.207
.199
.187
.179
.163
.149
.121
.238
.230
.226
.218
.210
.194
.186
.180
.166
.152
.134
.120
.084
.060
.269
.261
.249
.241
.225
.211
3/32"
.0938
2.38mm
1/8"
.1250
3.18mm
5/32"
.1563
3.97mm
3/16"
.1875
4.76mm
7/32"
.2188
5.56mm
1/4"
.2500
6.35mm
9/32"
.2813
7.14mm
Item #
Type
304
Type
316
.002
.002
F10032X006
F10032X010
WD SL
WD SL
WD SL
WD SL
.004
.006
.008
.009
.010
.010
.010
.006
.009
.013
.016
.020
.022
.008
.012
.015
.019
.023
.027
.029
.032
.034
.038
.040
.010
.016
.024
.029
.039
.046
.057
.012
.019
.030
.036
.048
.058
.073
.086
.014
.023
.035
.043
.058
.069
.090
.016
.026
.031
.040
.050
.067
.075
.081
.094
.106
.120
.130
.150
.159
.018
.029
.046
.056
.076
.093
F10062X006
F10062X010
F10062X016
F10062X020
F10062X023
F10062X026
F10062X028
F10093X006
F10093X010
F10093X016
F10093X020
F10093X028
F10093X035
F10125X006
F10125X010
F10125X012
F10125X016
F10125X020
F10125X025
F10125X028
F10125X032
F10125X035
F10125X042
F10125X049
F10156X006
F10156X010
F10156X016
F10156X020
F10156X028
F10156X035
F10156X049
F10188X006
F10188X010
F10188X016
F10188X020
F10188X028
F10188X035
F10188X049
F10188X065
F10219X006
F10219X010
F10219X016
F10219X020
F10219X028
F10219X035
F10219X049
F10250X006
F10250X010
F10250X012
F10250X016
F10250X020
F10250X028
F10250X032
F10250X035
F10250X042
F10250X049
F10250X058
F10250X065
F10250X083
F10250X095
F10281X006
F10281X010
F10281X016
F10281X020
F10281X028
F10281X035
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Other Materials
200
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
200,321,600
200,276,321,400,600
200321600,Ti2
200,321,600
WD SL
WD SL
200,321,400,600,TI2
200,276,321,400,600
WD SL
200,321,400,600
WD SL
SL
SL
SL
SL
WD SL
WD SL
WD SL
WD SL
SL
SL
WD SL
WD SL
WD SL
WD SL
WD SL
WD SL
SL
SL
SL
SL
SL
SL
SL
200,276,321,400,600
WD
WD
WD
WD
WD
200,Ti2
200
200,321,600
200,321,600,Ti2
200,321,600
321
200
200,276,321,600
600
321
321
321
600
200,321,600
200,321,600
200,321,400,600
200,321,600
200,321,400,600
321
OD
Nom
Wall
Nom
ID Est Wt
Nom #/Ft
5/16"
.3125
7.94mm
.006
.010
.016
.020
.028
.035
.049
.065
.083
.095
.010
.016
.020
.028
.035
.006
.010
.016
.020
.028
.035
.049
.065
.083
.095
.120
.010
.016
.020
.028
.035
.049
.065
.083
.095
.120
.006
.010
.016
.020
.028
.035
.049
.065
.083
.095
.120
.156
.188
.010
.016
.020
.028
.035
.049
.065
.083
.095
.120
.188
.010
.016
.020
.028
.035
.049
.065
.083
.095
.301
.293
.281
.273
.257
.243
.215
.183
.147
.123
.324
.312
.304
.288
.274
.363
.355
.343
.335
.319
.305
.277
.245
.209
.185
.135
.418
.406
.398
.382
.368
.340
.308
.272
.248
.198
.488
.480
.468
.460
.444
.430
.402
.370
.334
.310
.260
.188
.124
.543
.531
.523
.507
.493
.465
.433
.397
.373
.323
.187
.605
.593
.585
.569
.555
.527
.495
.459
.435
11/32"
.3438
8.73mm
3/8"
.3750
9.53mm
7/16"
.4375
11.11mm
1/2"
.5000
12.70mm
321
200,600
WD SL
WD SL
WD SL
321,200,600
321,200,400,600
200,321,400,600
WD SL
200,276,321,400,600,Ti2
WD SL
SL
WD SL
WD SL
SL
200,321,400,600
321,Ti2
200,276,321,400,600
321,400
321
SL
SL
SL
SL
SL
Ti
Application: Used in many different industries ranging from medical to
instrumentation, fractional tubing covers small (1/32") to large (up
through 3") applications. Welded and drawn can often be substituted for
seamless because it usually has the same, if not better, appearance, tolerances and concentricity.
321
SL
WD SL
T321
9/16"
.5625
14.29mm
5/8"
.6250
15.88mm
.020
.033
.051
.063
.086
.105
.139
.174
.205
.223
.036
.057
.070
.095
.117
.024
.039
.062
.077
.105
.128
.172
.217
.261
.287
.330
.046
.073
.090
.124
.152
.205
.261
.317
.351
.411
.032
.053
.084
.104
.143
.176
.238
.305
.373
.415
.492
.579
.633
.060
.094
.117
.161
.199
.271
.349
.429
.479
.573
.759
.066
.105
.131
.180
.223
.304
.393
.485
.543
Item #
F10312X006
F10312X010
F10312X016
F10312X020
F10312X028
F10312X035
F10312X049
F10312X065
F10312X083
F10312X095
F10344X010
F10344X016
F10344X020
F10344X028
F10344X035
F10375X006
F10375X010
F10375X016
F10375X020
F10375X028
F10375X035
F10375X049
F10375X065
F10375X083
F10375X095
F10375X120
F10437X010
F10437X016
F10437X020
F10437X028
F10437X035
F10437X049
F10437X065
F10437X083
F10437X095
F10437X120
F10500X006
F10500X010
F10500X016
F10500X020
F10500X028
F10500X035
F10500X049
F10500X065
F10500X083
F10500X095
F10500X120
F10500X156
F10500X188
F10562X010
F10562X016
F10562X020
F10562X028
F10562X035
F10562X049
F10562X065
F10562X083
F10562X095
F10562X120
F10562X188
F10625X010
F10625X016
F10625X020
F10625X028
F10625X035
F10625X049
F10625X065
F10625X083
F10625X095
Type
304
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Type
316
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Other Materials
321
321
321,600
321,600
276,321,400,600,Ti2
321,600,Ti2
200,321,400,600,Ti2
321
200,321,600
200,321,600
200,321,400,600
200,276,321,400,600,Ti2
200,321,400,600,Ti2
200,276,321,400,600,Ti2
321,400,600
321
321
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
WD SL
SL
WD SL
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
321
321
321,600
321
321
321
321,600
200,321,600
200,321,400,600,Ti2
200,276,321,400,600,Ti2
200,276,321,400,600,Ti2
200,276,321,400,600,Ti2
321,400,600
321,400
321,400,600
321
321
321,400,600
321,600
321,600
321
321
321
200,276,321,400,600,Ti2
200,321,400,600,Ti2
200,321,400,600,Ti2
321,400,600
321,400,600
All dimensions are measured in inches except where designated mm (millimeters).
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
7
T304
OD
Nom
5/8"
cont.
11/16"
.6875
17.46mm
3/4"
.7500
19.05mm
13/16"
.8125
2.64mm
7/8"
.8750
22.23mm
1"
1.0000
25.40mm
1-1/8"
1.1250
28.58mm
1-1/4"
1.2500
31.75mm
1-3/8"
1.3750
34.93mm
1-1/2"
1.5000
38.10mm
Wall
Nom
.120
.156
.188
.020
.028
.035
.049
.065
.010
.016
.020
.028
.035
.049
.065
.083
.095
.120
.156
.188
.250
.028
.035
.049
.065
.010
.016
.020
.028
.035
.049
.065
.083
.095
.120
.156
.188
.250
.016
.020
.028
.035
.049
.065
.083
.095
.120
.156
.188
.250
.035
.049
.065
.083
.095
.120
.188
.250
.028
.035
.049
.065
.083
.095
.120
.188
.250
.035
.049
.065
.083
.095
.120
.188
.250
.028
.035
.049
.065
.083
.095
.120
.156
ID Est Wt
Nom #/Ft
.385
.313
.249
.648
.632
.618
.590
.558
.730
.718
.710
.694
.680
.652
.620
.584
.560
.510
.438
.374
.250
.757
.743
.715
.683
.855
.843
.835
.819
.805
.777
.745
.709
.685
.635
.563
.499
.375
.968
.960
.944
.930
.902
.870
.834
.810
.760
.688
.624
.500
1.055
1.027
.995
.959
.935
.885
.749
.625
1.194
1.180
1.152
1.120
1.084
1.060
1.010
.874
.750
1.305
1.277
1.245
1.209
1.185
1.135
.999
.875
1.444
1.430
1.402
1.370
1.334
1.310
1.260
1.188
T316
.654
.789
.886
.144
.199
.246
.337
.436
.080
.127
.157
.218
.270
.371
.480
.597
.671
.815
1.000
1.140
1.348
.237
.294
.404
.524
.093
.148
.184
.256
.317
.437
.568
.709
.799
.977
1.210
1.393
1.685
.170
.211
.294
.364
.503
.656
.821
.927
1.139
1.420
1.647
2.023
.412
.569
.743
.933
1.055
1.301
1.900
2.360
.369
.459
.635
.831
1.045
1.184
1.463
2.154
2.697
.506
.701
.918
1.157
1.312
1.624
2.407
3.034
.445
.553
.767
1.006
1.269
1.440
1.786
2.262
Item #
Type
304
F10625X120
F10625X156
F10625X188
F10688X020
F10688X028
F10688X035
F10688X049
F10688X065
F10750X010
F10750X016
F10750X020
F10750X028
F10750X035
F10750X049
F10750X065
F10750X083
F10750X095
F10750X120
F10750X156
F10750X188
F10750X250
F10812X028
F10812X035
F10812X049
F10812X065
F10875X010
F10875X016
F10875X020
F10875X028
F10875X035
F10875X049
F10875X065
F10875X083
F10875X095
F10875X120
F10875X156
F10875X188
F10875X250
F11000X016
F11000X020
F11000X028
F11000X035
F11000X049
F11000X065
F11000X083
F11000X095
F11000X120
F11000X156
F11000X188
F11000X250
F11125X035
F11125X049
F11125X065
F11125X083
F11125X095
F11125X120
F11125X188
F11125X250
F11250X028
F11250X035
F11250X049
F11250X065
F11250X083
F11250X095
F11250X120
F11250X188
F11250X250
F11375X035
F11375X049
F11375X065
F11375X083
F11375X095
F11375X120
F11375X188
F11375X250
F11500X028
F11500X035
F11500X049
F11500X065
F11500X083
F11500X095
F11500X120
F11500X156
WD SL
SL
SL
SL
SL
WD SL
WD SL
WD SL
SL
SL
WD SL
WD SL
WD SL
WD SL
WD SL
WD SL
WD SL
WD SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
WD SL
WD SL
WD SL
WD SL
WD SL
WD SL
WD SL
SL
SL
SL
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Type
316
Other Materials
WD SL
321
SL
SL
SL
SL
321
WD SL
321
WD SL
SL
321
SL
SL
321
SL
321
WD SL
321
WD SL
200,321,400,600,Ti2
WD SL 200,276,321,400,600,Ti2
WD SL 200,276,321,400,600,Ti2
WD SL
200,321,400,600
WD SL
321,400,600
WD SL
321,400,600
SL
SL
SL
321
SL
321
SL
SL
SL
SL
SL
321
SL
321
WD SL
321,400,600
WD SL
321,400,600
WD SL
200,321,400,600
WD SL
321
WD SL
321
WD SL
321
321
SL
321
SL
321
321
321
SL
321
WD SL
200,321,400,600,Ti2
WD SL 200,276,321,400,600,Ti2
WD SL 200,276,321,400,600,Ti2
WD SL
200,321,400,600
WD SL
321,400,600
WD SL
321,400,600
SL
321
SL
321
SL
321
WD SL
321
WD SL
321
WD SL
321
SL
321
SL
321
SL
321
SL
321
SL
321
SL
321
WD SL
321,400,600
WD SL
321,400,600
WD SL
200,321,400,600
WD SL
321,400,600
WD SL
321,400,600
WD SL
321,400,600
SL
321
SL
321
SL
321
WD SL
321
WD SL
321
SL
SL
WD SL
SL
321
SL
321
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
321
321,400,600
200,321,400,600
200,321,400,600
321,400,600
321,600
OD
Nom
Wall
Nom
1-1/2"
cont.
.188
.250
.312
.375
.035
.049
.065
.083
.095
.120
.188
.250
.375
.035
.049
.065
.083
.095
.120
.156
.188
.250
.375
.035
.049
.065
.083
.095
.120
.188
.250
.028
.035
.049
.065
.083
.095
.120
.156
.188
.250
.312
.375
.437
.500
.035
.049
.065
.083
.095
.120
.188
.250
.375
.500
.035
.049
.065
.083
.095
.120
.188
.250
.375
.500
.035
.049
.065
.083
.095
.120
.188
.250
.375
.500
.035
.049
.065
.083
.095
.120
.188
.250
1-5/8"
1.6250
41.28mm
1-3/4"
1.7500
44.45mm
1-7/8"
1.8750
47.63mm
2"
2.0000
5.80mm
2-1/8"
2.1250
53.98mm
2-1/4"
2.2500
57.15mm
2-3/8"
2.3750
6.33mm
2-1/2"
2.5000
63.50mm
ID Est Wt
Nom #/Ft
1.124
1.000
.876
.750
1.555
1.527
1.495
1.459
1.435
1.385
1.249
1.125
.875
1.680
1.652
1.620
1.584
1.560
1.510
1.438
1.374
1.250
1.000
1.805
1.777
1.745
1.709
1.685
1.635
1.499
1.375
1.944
1.930
1.902
1.870
1.834
1.810
1.760
1.688
1.624
1.500
1.376
1.250
1.126
1.000
2.055
2.027
1.995
1.959
1.935
1.885
1.749
1.625
1.375
1.125
2.180
2.152
2.120
2.084
2.060
2.010
1.874
1.750
1.500
1.250
2.305
2.277
2.245
2.209
2.185
2.135
1.999
1.875
1.625
1.375
2.430
2.402
2.370
2.334
2.310
2.260
2.124
2.000
2.661
3.371
3.998
4.551
.600
.833
1.094
1.381
1.568
1.948
2.914
3.708
5.056
.647
.899
1.181
1.492
1.696
2.110
2.682
3.168
4.045
5.562
.695
.965
1.269
1.604
1.824
2.272
3.421
4.382
.596
.742
1.031
1.357
1.716
1.952
2.434
3.103
3.675
4.719
5.681
6.573
7.368
8.090
.789
1.097
1.444
1.828
2.080
2.595
3.928
5.056
7.079
8.764
.836
1.163
1.532
1.940
2.208
2.757
4.182
5.393
7.584
9.438
.883
1.229
1.620
2.052
2.336
2.919
4.435
5.730
8.090
1.113
.931
1.295
1.707
2.164
2.465
3.081
4.689
6.068
T321
Item #
F11500X188
F11500X250
F11500X312
F11500X375
F11625X035
F11625X049
F11625X065
F11625X083
F11625X095
F11625X120
F11625X188
F11625X250
F11625X375
F11750X035
F11750X049
F11750X065
F11750X083
F11750X095
F11750X120
F11750X156
F11750X188
F11750X250
F11750X375
F11875X035
F11875X049
F11875X065
F11875X083
F11875X095
F11875X120
F11875X188
F11875X250
F12000X028
F12000X035
F12000X049
F12000X065
F12000X083
F12000X095
F12000X120
F12000X156
F12000X188
F12000X250
F12000X312
F12000X375
F12000X437
F12000X500
F12125X035
F12125X049
F12125X065
F12125X083
F12125X095
F12125X120
F12125X188
F12125X250
F12125X375
F12125X500
F12250X035
F12250X049
F12250X065
F12250X083
F12250X095
F12250X120
F12250X188
F12250X250
F12250X375
F12250X500
F12375X035
F12375X049
F12375X065
F12375X083
F12375X095
F12375X120
F12375X188
F12375X250
F12375X375
F12375X500
F12500X035
F12500X049
F12500X065
F12500X083
F12500X095
F12500X120
F12500X188
F12500X250
Type
304
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Type
316
Ti
Other Materials
SL
SL
SL
SL
321
WD SL
WD SL
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
321
321
321
321
321
321,400
200
200
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
321
SL
SL
200
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
321
321
321
321
321,400,600
321
321
321
321
321
321
321
321
321
321
321
321
200,321,400,600
200,321,400,600
321,600
321,400,600
321
321
321
321
321
SL
SL
WD SL
SL
SL
SL
SL
SL
SL
SL
WD SL
SL
SL
SL
SL
SL
SL
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
321
321
321
321
321
321
321
321
321
321
321
321
321
321
SL
WD SL
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
8
321
321
321
321
321
321
321
321
321
200,321,400
200,321,400
321
321
321
321
T304
OD
Nom
Wall
Nom
2-1/2"
cont.
2-5/8"
2.6250
66.68mm
.375
.500
.049
.065
.095
.120
.188
.250
.375
.500
2-3/4"
.035
2.7500
.049
69.85mm .065
.083
.120
.188
.250
.375
.500
T316
ID Est Wt
Nom #/Ft
1.750 8.596
1.500 1.787
2.527 1.362
2.495 1.795
2.435 2.593
2.385 3.243
2.249 4.942
2.125 6.405
1.875 9.101
1.625 11.461
2.680 1.025
2.652 1.428
2.620 1.883
2.584 2.388
2.510 3.404
2.374 5.196
2.250 6.742
2.000 9.607
1.750 12.135
Item #
Type
304
F12500X375
F12500X500
F12625X049
F12625X065
F12625X095
F12625X120
F12625X188
F12625X250
F12625X375
F12625X500
F12750X035
F12750X049
F12750X065
F12750X083
F12750X120
F12750X188
F12750X250
F12750X375
F12750X500
WD
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Type
316
Other Materials
SL
SL
321
321
321
321
WD SL
SL
SL
SL
SL
SL
321
321
321
321
321
321
321
321
321
321
321
321
321
WD SL
WD SL
WD SL
SL
SL
SL
SL
OD
Nom
Wall
Nom
ID Est Wt
Nom #/Ft
3"
.035
3.0000
.049
76.20mm .065
.083
.095
.120
.156
.188
.250
.312
.375
.500
.625
.750
2.930 1.119
2.902 1.560
2.870 2.058
2.834 2.612
2.810 2.977
2.760 3.728
2.688 4.786
2.624 5.703
2.500 7.416
2.376 9.046
2.250 1.618
2.000 13.484
1.750 16.012
1.500 18.203
1-Standard Tol.
Tolerance
Wall
2-Close Tol.
Tolerance
OD
Category
Tube Size
OD
Tolerance
OD
(Inches)
(Inches)
(%)
(Inches)
(%)
< 3/32
3/32 to < 3/16
3/16 to < 1/2
1/2 to < 1-1/2
1-1/2 to < 3-1/2
±.005
±.005
±.005
±.005
±.010
±15%
±15%
±15%
±10%
±10%
+.002/-.000
+.003/-.000
+.004/-.000
+.005/-.000
NA
±10%
±10%
±10%
±10%
NA
Wall
Nom
(.0394")
(.0787")
(.1181")
(.1575")
(.1970")
(.2362")
(.2362")
(.2758")
(.2758")
(.3150")
(.3150")
(.3150")
(.3543")
(.3543")
(.3543")
.20
.50
.50
.50
.50
.50
1.00
.50
1.00
.50
1.00
1.50
.50
1.00
1.50
F13000X035
F13000X049
F13000X065
F13000X083
F13000X095
F13000X120
F13000X156
F13000X188
F13000X250
F13000X312
F13000X375
F13000X500
F13000X625
F13000X750
WD
WD
WD
WD
WD
WD
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Type
316
WD
WD
WD
WD
WD
(.008")
(.020")
(.020")
(.020")
(.020")
(.020")
(.039")
(.020")
(.039")
(.020")
(.039")
(.059")
(.020")
(.039")
(.059")
ID
Nom
.59
.98
1.98
2.98
3.98
4.98
4.02
5.98
5.02
6.98
6.02
5.00
7.98
7.01
6.00
(.023")
(.039")
(.078")
(.118")
(.157")
(.196")
(.158")
(.236")
(.198")
(.275")
(.237")
(.197")
(.314")
(.276")
(.236")
Est Wt
#/Ft
Type 304
Item #
.003
.013
.021
.03
.039
.047
.084
.056
.101
.064
.118
.165
.073
.134
.188
304M01X.20SL
304M02X.50SL
304M03X.50SL
304M04X.50SL
304M05X.50SL
304M06X.50SL
304M06X1.00SL
304M07X.50SL
304M07X1.00SL
304M08X.50SL
304M08X1.00SL
304M08X1.50SL
304M09X.50SL
304M09X1.00SL
304M09X1.50SL
Other Materials
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
321
321
200,321,400,600
321,400
321
321,600
321
321
321
321
321
321
Nominal O.D.
Nominal Wall
Tolerance
Wall
304 F1 0032X006 SL
Material
Description: Metric tubing is stocked in seamless 304 and 316 stainless
steel, from 1mm OD to 24mm OD. Can be supplied in other grades on a
custom basis. Primarily stocked in annealed temper. Manufactured to OD
and wall dimensions.
1
2
3
4
5
6
6
7
7
8
8
8
9
9
9
Type
304
Tolerance Level
Manufacture Type
Stock Metric Tubing
T316
OD
Nom
Item #
Ti
How to Specify Fractional Tubing
Tolerance Table: Fractional Tubing
Tolerances
T321
Application: Commonly used with standard metric compression fittings,
metric tubing can also be used in other commercial applications that
require corrosion resistance, strength, and uniformity.
OD
Nom
Type 316
Item #
316M02X.50SL
316M03X.50SL
316M04X.50SL
316M05X.50SL
316M06X.50SL
316M06X1.00SL
316M07X.50SL
316M07X1.00SL
316M08X.50SL
316M08X1.00SL
316M09X.50SL
316M09X1.00SL
316M09X1.50SL
T316
10 (.3940")
10 (.3940")
10 (.3940")
10 (.3940")
11 (.4331")
12 (.4728")
12 (.4728")
12 (.4728")
12 (.4728")
14 (.5512")
16 (.6299")
20 (.7874")
20 (.7874")
22 (.8661")
24 (.9449")
Wall
Nom
.50
1.00
1.50
2.00
1.00
.50
1.00
1.50
2.00
1.50
1.50
1.00
1.50
1.50
1.50
ID
Nom
(.020")
(.039")
(.059")
(.079")
(.039")
(.020")
(.039")
(.059")
(.079")
(.059")
(.059")
(.039")
(.059")
(.059")
(.059")
8.98
8.02
7.01
5.99
9.01
1.98
1.02
9.01
7.99
1.99
12.99
18.00
16.99
18.99
2.99
(.354")
(.316")
(.276")
(.236")
(.355")
(.433")
(.395")
(.355")
(.315")
(.433")
(.512")
(.709")
(.669")
(.748")
(.827")
Est Wt
#/Ft
Type 304
Item #
Type 316
Item #
.082
.151
.216
.272
.168
.099
.185
.267
.34
.317
.368
.428
.469
.52
.571
304M10X.50SL
304M10X1.00SL
304M10X1.50SL
304M10X2.00SL
304M11X1.00SL
304M12X.50SL
304M12X1.00SL
304M12X1.50SL
304M12X2.00SL
304M14X1.50SL
304M16X1.50SL
304M20X1.00SL
304M20X1.50SL
304M22X1.50SL
304M24X1.50SL
316M10X.50SL
316M10X1.00SL
316M11X1.00SL
316M12X.50SL
316M12X1.00SL
316M14X1.50SL
316M16X1.50SL
316M20X1.00SL
316M20X1.50SL
316M22X1.50SL
316M24X1.50SL
How to Specify Metric Tubing
Tolerance Table: Metric Tubing
OD (mm)
OD Tolerance
Wall Tolerance
< 3mm
3mm to < 6mm
6mm to < 14mm
14mm to < 24mm
+.000/-.050
+.000/-.080
+.000/-.100
+.000/-.130
+15%/-0%
+15%/-0%
+20%/-0%
+20%/-0%
Category
Nominal Wall
304 M 01 X .50 SL
Material
Nominal O.D.
Manufacture Type
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
9
Stock Medical Grade Tubing
T316L
Description: Medical Quality tubing is manufactured from T316L certified
stainless steel in ID’s from .020" to .500" with ±.001" ID tolerances or
.500" to 1.000" ID with ±.0015" ID tolerances. Available in thin walls,
“MQ” tubing is welded and mandrel drawn to approximately 1/8 - 1/2 hard
temper, depending on the size.
Applications: Ideal for applications requiring tighter than normal tolerances.
Some temper is added for applications that require more rigidity, such as
in medical instrumentation. This material typically offers better ID finishes
than stock material which is ideal for instrumentation applications.
OD
Nom
Wall
Nom
ID
Nom
ID
Min/Max
Wall
Min/Max
OD
Min/Max
Est Wt
#/Ft
Item #
1/8"
.125
3.175mm
.0060
.0100
.0160
.0200
.0060
.0100
.0160
.0200
.0060
.0100
.0160
.0200
.0060
.0100
.0160
.0200
.0060
.0100
.0160
.0200
.0060
.0100
.0160
.0200
.0100
.1130
.1050
.0930
.0850
.1443
.1363
.1243
.1163
.1755
.1675
.1555
.1475
.2380
.2300
.2180
.2100
.3630
.3550
.3430
.3350
.4880
.4800
.4680
.4600
.6050
.1120/.1140
.1040/.1060
.0920/.0940
.0840/.0860
.1433/.1453
.1353/.1373
.1233/.1253
.1153/.1173
.1745/.1765
.1665/.1685
.1545/.1565
.1465/.1485
.2370/.2390
.2290/.2310
.2170/.2190
.2090/.2110
.3620/.3640
.3540/.3560
.3420/.3440
.3340/.3360
.4865/.4895
.4785/.4815
.4665/.4695
.4585/.4615
.6035/.6065
.0054/.0066
.0090/.0110
.0144/.0176
.0180/.0220
.0054/.0066
.0090/.0110
.0144/.0176
.0180/.0220
.0054/.0066
.0090/.0110
.0144/.0176
.0180/.0220
.0054/.0066
.0090/.0110
.0144/.0176
.0180/.0220
.0054/.0066
.0090/.0110
.0144/.0176
.0180/.0220
.0054/.0066
.0090/.0110
.0144/.0176
.0180/.0220
.0090/.0110
.1228/.1272
.1220/.1280
.1208/.1292
.1200/.1300
.1541/.1585
.1533/.1593
.1521/.1605
.1513/.1613
.1853/.1897
.1845/.1905
.1833/.1917
.1825/.1925
.2478/.2522
.2470/.2530
.2458/.2542
.2450/.2550
.3728/.3772
.3720/.3780
.3708/.3792
.3700/.3800
.4973/.5027
.4965/.5035
.4953/.5047
.4945/.5055
.6215/.6285
.0080
.0130
.0190
.0200
.0100
.0160
.0250
.0300
.0120
.0190
.0300
.0370
.0160
.0260
.0410
.0500
.0260
.0400
.0630
.0780
.0320
.0540
.0850
.1050
.0670
316Q0125X006WD
316Q0125X010WD
316Q0125X016WD
316Q0125X020WD
316Q0156X006WD
316Q0156X010WD
316Q0156X016WD
316Q0156X020WD
316Q0188X006WD
316Q0188X010WD
316Q0188X016WD
316Q0188X020WD
316Q0250X006WD
316Q0250X010WD
316Q0250X016WD
316Q0250X020WD
316Q0375X006WD
316Q0375X010WD
316Q0375X016WD
316Q0375X020WD
316Q0500X006WD
316Q0500X010WD
316Q0500X016WD
316Q0500X020WD
316Q0625X010WD
.0100
.7300
.7285/.7315
.0090/.0110
.7465/.7535
.0810
316Q0750X010WD
.0100
.8550
.8535/.8565
.0090/.0110
.8715/.8785
.0950
316Q0875X010WD
.0100
.9800
.9785/.9815
.0090/.0110
.9965/1.0035 .1080
316Q1000X010WD
5/32"
.156
3.970mm
3/16"
.188
4.763mm
1/4"
.250
6.350mm
3/8"
.375
9.525mm
1/2"
.500
12.700mm
5/8"
.625
15.875mm
3/4"
.750
19.050mm
7/8"
.875
22.225mm
1"
1.000
25.400mm
T316L
.D.
ht I s
Tig rance
Tole
How to Specify Medical Grade Tubibg
Category
Nominal Wall
316 Q 0125 X 010 WD
Material
Nominal O.D.
Manufacture Type
Pipe
T304
Description: Pipe is manufactured to OD and wall dimensions.
Generally available in any drawable metal or alloy with method of
manufacture (seamless or welded) dictated by material, to OD/Wall
ratio and wall thickness. Standards cover actual dimensions, tolerances, chemical and physical requirements.
T316
Nominal OD
Application: Pipe is a tubular product intended primarily for such
purposes as the conveying of water, fuel, gas, air, steam, etc. It
has also been found to be a convenient form for use as structural
members, such as columns and railings. Usually good for commercial applications.
Pipe
Size
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
Schedule Number (Wall Thickness Shown in table below)
Inches
Sch#
5S
Sch#
5
Sch#
10/S
Sch#
40S
Sch#
40Std
Sch#
40
Sch#
80/S
Sch#
160
Sch#
XXH
0.405
0.54
0.675
0.84
1.05
1.315
1.66
1.9
2.375
2.875
.035
.049
.049
.065
.065
.065
.065
.065
.065
.083
.035
.049
.049
.065
.065
.065
.065
.065
.065
.083
.049
.065
.065
.083
.083
.109
.109
.109
.109
.120
.068
.088
.091
.109
.113
.133
.140
.145
.154
.203
.068
.088
.091
.109
.113
.133
.140
.145
.154
.203
.068
.088
.091
.109
.113
.133
.140
.145
.154
.203
.095
.119
.126
.147
.154
.179
.191
.200
.218
.276
N/A
N/A
N/A
.187
.218
.250
.250
.281
.343
.375
N/A
N/A
N/A
.294
.308
.358
.382
.400
.436
.552
How to Specify Pipe
Tolerance Table: Pipe
STAINLESS STEEL PIPE TOLERANCES (ASTM A-312)
Nom Size
OD Tol
+
Category
Wall Tol
-
+
Schedule
-
1/8 to 1-1/2
1/64 (.015)
1/32 (.031)
12.5%
12.5%
1-1/2+ thru 4
1/32 (.031)
1/32 (.031)
12.5%
12.5%
4+ thru 8
1/16 (.062)
1/32 (.031)
12.5%
12.5%
8+ thru 18
3/32 (.093)
1/32 (.031)
12.5%
12.5%
18+ thru 24
1/8 (.125)
1/32 (.031)
12.5%
12.5%
304 P 0125 S05 SL
Material
Size
Manufacture Type
10
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
Standards in
24 Hours!
Customs
Fast!
Stainless Steel TubeKITS
Seamless Fractional Tubing
or
at f pes
e
r
G oty
t
Pro
Description: “Fractional” refers to any tubing that is less than 3" in outside diameter and
whose outside diameter is an even increment of 1/64" (.016). Fractional tubing can generally be produced by any method of manufacture and in any drawable metal. Available in random lengths and TubeKITS™. Material is manufactured to OD and wall dimensions.
Application: Fractional tubing is most common in T304 and T316 stainless steel for general
commercial applications due to availability and relatively low cost, as well as prototyping.
Size
Wall
Nom
ID
Theo
T304
Item #
1/16"
3/32"
1/8"
.010
.016
.016
.028
.028
.028
.035
.049
.065
.028
.028
.035
.049
.065
.028
.035
.049
.065
.028
.035
.049
.065
.035
.049
.065
.043
.061
.093
.069
.132
.194
.180
.152
.120
.257
.319
.305
.277
.245
.444
.430
.402
.370
.569
.555
.527
.495
.680
.652
.620
TK4FS0062X010
TK4FS0093X016
TK4FS0125X016
TK4FS0125X028
TK4FS0188X028
TK4FS0250X028
TK4FS0250X035
TK4FS0250X049
TK4FS0250X065
TK4FS0312X028
TK4FS0375X028
TK4FS0375X035
TK4FS0375X049
TK4FS0375X065
TK4FS0500X028
TK4FS0500X035
TK4FS0500X049
TK4FS0500X065
TK4FS0625X028
TK4FS0625X035
TK4FS0625X049
TK4FS0625X065
TK4FS0750X035
TK4FS0750X049
TK4FS0750X065
3/16"
1/4"
5/16"
3/8"
• TubeKIT Stocked in 1 Meter Lengths
unless noted
• Available in T304 & T316
• Mix & Match Alloys & Sizes
• 250 Plus Items Available
• No Certs. of Compliance
• Quantity Discounts Available
• Great for Models and Prototypes
1/2"
5/8"
3/4"
$ ea
T316
Item #
Call or
access
web
for
pricing
TK6FS0062X010
TK6FS0093X016
TK6FS0125X016
TK6FS0125X028
TK6FS0188X028
TK6FS0250X028
TK6FS0250X035
TK6FS0250X049
TK6FS0250X065
TK6FS0312X028
TK6FS0375X028
TK6FS0375X035
TK6FS0375X049
TK6FS0375X065
TK6FS0500X028
TK6FS0500X035
TK6FS0500X049
TK6FS0500X065
TK6FS0625X028
TK6FS0625X035
TK6FS0625X049
TK6FS0625X065
TK6FS0750X035
TK6FS0750X049
TK6FS0750X065
$ ea
Meter
Call or
access
web
for
pricing
Seamless Metric Tubing
Description: With its OD expressed evenly in millimeters (mm), metric tubing can generally be produced by any method of manufacture and in any
drawable material. Standards cover actual dimensions and tolerances
plus chemical and physical requirements. Due to its custom nature, metric
tubing is sometimes limited in availability. No certs. of compliance.
Application: Stocked metric tubing is most common in T304 and T316
stainless steel for applications with standard metric compression fittings.
OD Nom
mm
OD Nom
Inches
Wall Nom
mm
Wall Nom
Inches
ID Nom
mm
ID Nom
Inches
T304
Item #
$ ea
1
2
3
4
5
6
8
10
12
14
16
20
.039
.079
.118
.158
.197
.236
.315
.394
.473
.552
.630
.788
.20
.50
.50
.50
.50
1.00
1.00
1.00
1.00
1.50
1.50
1.50
.008
.020
.020
.020
.020
.039
.039
.039
.039
.059
.059
.059
.60
1.00
2.00
3.00
4.00
4.00
6.00
8.00
10.00
11.00
13.00
17.00
.024
.039
.079
.118
.158
.158
.236
.315
.394
.433
.512
.670
TK4MS01X.20
TK4MS02X.50
TK4MS03X.50
TK4MS04X.50
TK4MS05X.50
TK4MS06X1.00
TK4MS08X1.00
TK4MS10X1.00
TK4MS12X1.00
TK4MS14X1.50
TK4MS16X1.50
TK4MS20X1.50
Call or
access
web
for
pricing
T316
Item #
TK6MS01X.20
TK6MS02X.50
TK6MS03X.50
TK6MS04X.50
TK6MS05X.50
TK6MS06X1.00
TK6MS08X1.00
TK6MS10X1.00
TK6MS12X1.00
TK6MS14X1.50
TK6MS16X1.50
TK6MS20X1.50
$ ea
Meter
Call or
access
web
for
pricing
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
11
Standards in
24 Hours!
Customs
Fast!
Stainless Steel TubeKITS
Hypodermic Tubing
304 Hypotube Engineering Kits
Description: Often referred to as “seamless” because of its smooth
appearance, hypo tubing is welded and drawn to tight OD and ID tolerances. Hypodermic tubing is stocked in grades 304 & 316 stainless steel
in the full hard condition. No certs. of compliance.
This handy kit is ideal for prototypes, tooling fixtures and more.
Economically priced, each kit features 98 pieces, including 3 feet
minimum lengths of each of the following sizes:
Application: Ideal for applications that require strength, uniformity, and
corrosion resistance. Not fit for pressure service.
Gage
OD
Nom
Wall
Theo
ID
Nom
T304
Item #
$ ea
6RW
7RW
8RW
9RW
10RW
11RW
11TW
12RW
12TW
13RW
13TW
14RW
14TW
15RW
15TW
16RW
16TW
17RW
17TW
18RW
18TW
19RW
19TW
20RW
20TW
21RW
21TW
22RW
22TW
23RW
23TW
24RW
24TW
25RW
25TW
26RW
27RW
28RW
29RW
30RW
.2030
.1800
.1650
.1480
.1340
.1200
.1200
.1090
.1090
.0950
.0950
.0830
.0830
.0720
.0720
.0650
.0650
.0590
.0590
.0500
.0500
.0425
.0425
.0355
.0355
.0320
.0320
.0280
.0280
.0250
.0250
.0220
.0220
.0200
.0200
.0180
.0160
.0140
.0130
.0120
.015
.015
.015
.015
.014
.013
.010
.012
.009
.012
.009
.010
.006
.009
.006
.009
.006
.009
.007
.009
.004
.008
.005
.006
.005
.006
.005
.006
.004
.006
.004
.005
.004
.005
.004
.004
.004
.003
.003
.003
.173"
.150
.135
.118
.106
.094
.100
.085
.091
.071
.077
.063
.072
.054
.060
.047
.053
.041
.046
.033
.042
.028
.033
.024
.026
.020
.023
.016
.020
.013
.017
.012
.014
.010
.012
.010
.008
.007
.007
.006
TK4H06RW
TK4H07RW
TK4H08RW
TK4H09RW
TK4H10RW
TK4H11RW
TK4H11TW
TK4H12RW
TK4H12TW
TK4H13RW
TK4H13TW
TK4H14RW
TK4H14TW
TK4H15RW
TK4H15TW
TK4H16RW
TK4H16TW
TK4H17RW
TK4H17TW
TK4H18RW
TK4H18TW
TK4H19RW
TK4H19TW
TK4H20RW
TK4H20TW
TK4H21RW
TK4H21TW
TK4H22RW
TK4H22TW
TK4H23RW
TK4H23TW
TK4H24RW
TK4H24TW
TK4H25RW
TK4H25TW
TK4H26RW
TK4H27RW
TK4H28RW
TK4H29RW
TK4H30RW
Call or
access
web
for
pricing
T316
Item #
TK6H06RW
TK6H07RW
TK6H08RW
TK6H09RW
TK6H10RW
TK6H11RW
TK6H11TW
TK6H12RW
TK6H12TW
TK6H13RW
TK6H13TW
TK6H14RW
TK6H14TW
TK6H15RW
TK6H15TW
TK6H16RW
TK6H16TW
TK6H17RW
TK6H17TW
TK6H18RW
TK6H18TW
TK6H19RW
TK6H19TW
TK6H20RW
TK6H20TW
TK6H21RW
TK6H21TW
TK6H22RW
TK6H22TW
TK6H23RW
TK6H23TW
TK6H24RW
TK6H24TW
TK6H25RW
TK6H25TW
TK6H26RW
TK6H27RW
TK6H28RW
TK6H29RW
TK6H30RW
•
•
•
•
•
$ ea
Meter
Call or
access
web
for
pricing
EK4H6-34
Regular wall: 6-34 gage
Thin wall: 6-25 gage
Half-sizes: 6.5-25.5 gage
XX sizes: 7-9, 11-14, 16-25 gage
X sizes: 6, 7, 10-13, 15-17, 19,
20, 22 gage
No certs.
Seamless Pipe
Description: A special range of tubing sizes designated by dimension and
wall thickness. Generally available in any drawable metal or alloy, with
method of manufacture (seamless or welded) dictated by material, to
OD/Wall ratio and wall thickness. No certs. of compliance.
Application: Pipe is a tubular product intended primarily for such purposes as the conveying of water, fuel, gas, air, steam, etc. It has also been
found to be a convenient form for use as structural members such as
columns and railings.
Pipe
Size
Schedule
#
T304
Item #
$/ea
T316
Item #
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
1/2
10
40
10
40
10
40
5
10
40
TK4PS0125X10
TK4PS0125X40
TK4PS0250X10
TK4PS0250X40
TK4PS0375X10
TK4PS0375X40
TK4PS0500X5
TK4PS0500X10
TK4PS0500X40
21.00
18.19
28.51
23.15
34.89
29.98
40.92
47.26
36.46
TK6PS0125X10
TK6PS0125X40
TK6PS0250X10
TK6PS0250X40
TK6PS0375X10
TK6PS0375X40
TK6PS0500X5
TK6PS0500X10
TK6PS0500X40
ISO Registered Since 1996!
CERTIFICATE
OF REGISTRATION
Medical Grade Tubing
This is to certify that
Description: A medical-quality (“MQ”), T316L, stainless steel tubing manufactured in ID’s from .020" to .500" with ±.001" OD tolerances, or .500"
to 1.000" ID with ±.0015" ID tolerances. Available in thin wall fractional
OD (Category-F). Tubing is welded and drawn to approximately 1/8 - 1/4
hard temper. No certs. of compliance.
MicroGroup, Inc.
7 Industrial Park Road, Medway, Massachusetts 02053 USA
operates a
Quality Management System
which complies with the requirements of
ISO 9001:2008
for the following scope of registration
12
OD
Theo
Wall
Nom
ID
Nom
T316
Item #
1/8"
1/8"
5/32"
5/32"
3/16"
3/16"
1/4"
1/4"
3/8"
3/8"
1/2"
1/2"
.006
.010
.006
.010
.006
.010
.006
.010
.006
.010
.006
.010
.113
.105
.144
.136
.176
.168
.238
.230
.363
.355
.488
.480
TK6MQ0125X006
TK6MQ0125X010
TK6MQ0156X006
TK6MQ0156X010
TK6MQ0188X006
TK6MQ0188X010
TK6MQ0250X006
TK6MQ0250X010
TK6MQ0375X006
TK6MQ0375X010
TK6MQ0500X006
TK6MQ0500X010
PROMPT
AND
PERSONAL SERVICE
$ ea
Meter
Call or
access
web
for
pricing
Manufacturer, fabricator, and distributor of small diameter metal tubing, tubular
components and miniature assemblies.
Certificate No: CERT-0040520
File No:
004342
Issue Date:
March 12, 2009
Wendy Tilford
President,
QMI-SAI Canada Limited
Original Certification Date: July 20, 1996
Current Certification Date: April 9, 2009
Certificate Expiry Date:
April 8, 2012
Alex Ezrakhovich
General Manager,
SAI Global Certification Services Pty Ltd
________________________________________________________________________________
ISO 9001
Registered by:
SAI Global Certification Services Pty Ltd, 286 Sussex Street, Sydney NSW 2000 Australia with QMI-SAI Canada Limited, 20 Carlson Court, Suite 100,
Toronto, Ontario M9W 7K6 Canada (SAI GLOBAL). This registration is subject to the SAI Global Terms and Conditions for Certification. While all due care
and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for proven negligence. This certificate remains the property
of SAI Global and must be returned to them upon request.
To verify that this certificate is current, please refer to the SAI Global On-Line Certification Register: www.qmi-saiglobal.com/qmi_companies/
AT
800-255-8823
$ ea
Meter
Call or
access
web
for
pricing
Stainless Steel Bar, Rod & Wire Materials
Stainless Steel Bar & Rod
Description: Stainless steel bar & rod is stocked primarily in the annealed condition. Available alloys from stock are 303, 304, 316, 316"L". Most
sizes are Screw Machine Quality (SMQ), which offers finishes and tolerances exceeding ASTM A484. Other sizes, alloys and tempers are available upon
request. Call for details.
Nom. Dia.
Item #
Materials
Nom. Dia.
Item #
Materials
.093
.125
.156
.188
.219
.250
.281
.312
.375
.437
.500
B0093XRND
B0125XRND
B0156XRND
B0188XRND
B0219XRND
B0250XRND
B0281XRND
B0312XRND
B0375XRND
B0437XRND
B0500XRND
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
.562
.625
.750
.875
1.00
1.125
1.250
1.375
1.500
1.750
2.00
B0562XRND
B0625XRND
B0750XRND
B0875XRND
B1000XRND
B1125XRND
B1250XRND
B1375XRND
B1500XRND
B1750XRND
B2000XRND
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
303,304,316,316L
$ ea
Call or
access
web
for
pricing
How to Specify Bar & Rod
Diameter Tolerance Comparison
Nom. Dia.
Example Sizes
Tolerances
SMQ
Tolerances
ASTM A484
.219"
.375"
.500"
±.0006"
±.0007
±.00085
±.001"
±.0015"
±.002"
304 B 0093 X RND
Material
Category
Nom. Dia.
Round
Stainless Steel Wire
Description: Stainless steel wire is stocked primarily in 304 stainless steel, with spring temper
per ASTM A313 and a bright surface finish.
Sizes range from .003" to .156" in .001" increments. Diameter tolerance for wire is typically
±.0002". Other alloys and tempers available,
call for details.
How to Specify Wire
Category
Round
304 B 0010 X RND
Material
Nom. Dia.
Nom.
Dia.
Item #
Nom.
Dia.
Item #
Nom.
Dia.
Item #
Nom.
Dia.
Item #
.003
.004
.005
.006
.007
.008
.009
.010
.011
.012
.013
.014
.015
.016
.017
.018
.019
.020
.021
.022
.023
.024
.025
.026
.027
.028
.029
.030
.031
.032
.033
.034
.035
.036
.037
.038
.039
.040
.041
304B0003XRND
304B0004XRND
304B0005XRND
304B0006XRND
304B0007XRND
304B0008XRND
304B0009XRND
304B0010XRND
304B0011XRND
304B0012XRND
304B0013XRND
304B0014XRND
304B0015XRND
304B0016XRND
304B0017XRND
304B0018XRND
304B0019XRND
304B0020XRND
304B0021XRND
304B0022XRND
304B0023XRND
304B0024XRND
304B0025XRND
304B0026XRND
304B0027XRND
304B0028XRND
304B0029XRND
304B0030XRND
304B0031XRND
304B0032XRND
304B0033XRND
304B0034XRND
304B0035XRND
304B0036XRND
304B0037XRND
304B0038XRND
304B0039XRND
304B0040XRND
304B0041XRND
.042
.043
.044
.045
.046
.047
.048
.049
.050
.051
.052
.053
.054
.055
.056
.057
.058
.059
.060
.061
.062
.063
.064
.065
.066
.067
.068
.069
.070
.071
.072
.073
.074
.075
.076
.077
.078
.079
.080
304B0042XRND
304B0043XRND
304B0044XRND
304B0045XRND
304B0046XRND
304B0047XRND
304B0048XRND
304B0049XRND
304B0050XRND
304B0051XRND
304B0052XRND
304B0053XRND
304B0054XRND
304B0055XRND
304B0056XRND
304B0057XRND
304B0058XRND
304B0059XRND
304B0060XRND
304B0061XRND
304B0062XRND
304B0063XRND
304B0064XRND
304B0065XRND
304B0066XRND
304B0067XRND
304B0068XRND
304B0069XRND
304B0070XRND
304B0071XRND
304B0072XRND
304B0073XRND
304B0074XRND
304B0075XRND
304B0076XRND
304B0077XRND
304B0078XRND
304B0079XRND
304B0080XRND
.081
.082
.083
.084
.085
.086
.087
.088
.089
.090
.091
.092
.093
.094
.095
.096
.097
.098
.099
.100
.101
.102
.103
.104
.105
.106
.107
.108
.109
.110
.111
.112
.113
.114
.115
.116
.117
.118
.119
304B0081XRND
304B0082XRND
304B0083XRND
304B0084XRND
304B0085XRND
304B0086XRND
304B0087XRND
304B0088XRND
304B0089XRND
304B0090XRND
304B0091XRND
304B0092XRND
304B0093XRND
304B0094XRND
304B0095XRND
304B0096XRND
304B0097XRND
304B0098XRND
304B0099XRND
304B0100XRND
304B0101XRND
304B0102XRND
304B0103XRND
304B0104XRND
304B0105XRND
304B0106XRND
304B0107XRND
304B0108XRND
304B0109XRND
304B0110XRND
304B0111XRND
304B0112XRND
304B0113XRND
304B0114XRND
304B0115XRND
304B0116XRND
304B0117XRND
304B0118XRND
304B0119XRND
.120
.121
.122
.123
.124
.125
.126
.127
.128
.129
.130
.131
.132
.133
.134
.135
.136
.137
.138
.139
.140
.141
.142
.143
.144
.145
.146
.147
.148
.149
.150
.151
.152
.153
.154
.155
.156
304B0120XRND
304B0121XRND
304B0122XRND
304B0123XRND
304B0124XRND
304B0125XRND
304B0126XRND
304B0127XRND
304B0128XRND
304B0129XRND
304B0130XRND
304B0131XRND
304B0132XRND
304B0133XRND
304B0134XRND
304B0135XRND
304B0136XRND
304B0137XRND
304B0138XRND
304B0139XRND
304B0140XRND
304B0141XRND
304B0142XRND
304B0143XRND
304B0144XRND
304B0145XRND
304B0146XRND
304B0147XRND
304B0148XRND
304B0149XRND
304B0150XRND
304B0151XRND
304B0152XRND
304B0153XRND
304B0154XRND
304B0155XRND
304B0156XRND
$ ea
Call or
access
web
for
pricing
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
13
Custom Tubing
Drawing & Centerless Grinding
Drawing is the process used to size
tubing by reducing a larger sized tube
to a smaller one while maintaining or
reducing the wall thickness based on
the specifications required.
MicroGroup can draw most metals,
although we specialize in Stainless
Steel and Nickel Based Alloys.
Centerless Grinding reduces the
Outside Diameter (OD) of the tubing
length and cylindrical parts. Tight tolerances can be maintained. Selecting
standard Inside Diameter (ID) sizes and
grinding to the desired OD size
can often be a cost effective approach
to producing a custom sized tube.
This eliminates the sometimes costly
set-up charges of redrawing.
This is accomplished by using a draw
bench and dies. Pulling the material
through a die and over a mandrel at the
same time controls both the Outside
Diameter (OD) and usually the Wall
thickness, or the Inside Diamter (ID).
Custom drawn tubing can generally be
produced by MicroGroup in most metals. Customs are achievable with tolerances to meet your needs, from standard to tight.
How to Specify Shaped Tubing
Category
Nominal Wall
304 X 0375 X 035 SQR
Nominal O.D.
Material
Square = SQR
Rectangular = RCT
Delivery of customs are set-up to meet
your needs. Prompt deliveries
are our goal, however, they depend on
volume and availability of raw material.
Shape
Oval = OVL
Square and Rectangular Tubing
SQUARE TUBING
Nom. Dia.
Available Wall Thicknesses
.035
x
x
x
x
x
x
x
x
.375
.500
.625
.750
.875
1.000
1.125
1.250
1.375
1.500
1.750
2.000
2.250
2.500
3.000
3.500
4.000
5.000
Description: MicroGroup offers a variety of shaped tubing fast.
Customs can be re-drawn in house. Stock sizes are listed in
adjoining column. Made to ASTM A554 and primarily stocked in
304, 304"L", 316"and 316"L". Other alloys available, call for
details. Typically, O.D.(outside diameter) corner radii will equal 2x
the wall thickness.
AND
PERSONAL SERVICE
x
.083
x
x
x
x
x
x
x
x
x
x
x
x
x
x
.109
.120
.180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
.250
.375
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
RECTANGULAR TUBING
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
1.00
1.00
All dimensions are measured in inches except where designated mm
(millimeters).
PROMPT
.065
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Nom. Dia.
Applications: Shaped tubing can be used for structural and ornamental purposes. Such as boat rails, lawn chairs and many other
OEM purposes.
14
.049
x
x
x
x
x
x
x
x
x
x
AT
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.00
1.250
1.500
2.00
3/4
1.00
1.250
1.500
2.00
2.50
1.00
1.250
1.500
2.000
1.250
1.500
Available Wall Thicknesses
.035
x
.049
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
800-255-8823
x
.065
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
.083
.109
x
x
x
x
x
x
x
x
x
x
x
.120
x
x
100% Burr-Free
Cutting
Tubing
•
Most orders shipped
within 48 HOURS!
Solids
< ELECTROCHEMICAL
< EDM CUTTING
< COLD SAWING
< ABRASIVE CUTTING
< DEBURRING
< PASSIVATION
< ELECTROPOLISHING
www.microgroup.com
• RFQ’s
• Ordering
• Product Updates
• And More!
Tightly Toleranced Cuts
100% Burr-Free Cuts:
Tubing & Solids
MicroGroup has many technologies
for cutting tube. If you require length
tolerances down to ±.001", on
material with the OD ranging from
.005" to 1" and wall thickness up to
.375", ask your salesperson. If you
need solids up to 1" in diameter cut
in lengths down to .002", send your
requirements in for review.
Cutting is one of our specialties.
MicroGroup can supply 100% burr free
cuts on diameters from .004". This is the
superior method for cutting small diameter thin walled tubes and shapes where
edge quality is critical. Various edge conditions can be achieved from sharp to
well radiused. Many catheters are cut in
this manner. This process also does not
change the physical characteristics of the
material.
*See cutting tolerance options chart below.
Deburring
Deburring can be accomplished from
state of the art Electrochemical methods
to more traditional vibratory and wire
wheel, depending on the specifications.
Selecting a cost effective method is
based on the number of parts, size,
shape and length. Electrochemical is very
well suited for controlling edge breaking.
Cold Sawing
Cold sawing is primarily used for precise
length cuts in heavier walled tubes and
solids. Diameters range from .062" and
up. Most metals can be cold sawed, and
deburred at MicroGroup.
Abrasive Cutting
100% Burr-Free Cutting Tolerance Options
Abrasive Cutting can be performed on
most metals. Tubing, solids and shapes
can be cut using this method. Both Dry
and Wet cutting is done with wet cutting
minimizing burrs. Sizes range from .008"
diameter and up. Fairly tight tolerances
can be maintained with this process,
which is dependent on diameter and
lengths.
Standard
Tolerance
“C1”
+.010
Optional
Tolerance
“C2”
+.005
1.01" to 6.0"
+.015
+.010
6.01" to 12.0" (1')
+.030
+.015
12.01" (1') to 72.0" (6')
+.060
+.030
72.01" (6') to 144.0" (12')
+.100
+.060
144.01" (12') to 288.0" (24')
+.250
+.100
For cutting lengths:
up to 1.0"
* 48 hour delivery is contingent upon materials availability.
16
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
Precision
Manufacturing
Services
Fast Turnaround!
< TUBE FORMING
< MICRO-MACHINING
< WIRE & RAM EDM SERVICES
< LASER MACHINING
< LASER-WELDING
< DEVICE ASSEMBLY
< POST PROCESSING
< ELECTROPOLISHING
< CLEANING
www.microgroup.com
• RFQ’s
• Ordering
• Product Updates
• And More!
ISO 9002
Registered
Specialists
in Stainless Steel
and Titanium
Tube Forming
Bending – Tube, Bar, Rod and Wire
Flaring
MicroGroup offers a broad range of
bending solutions ranging in size
from as small as .015" to 1.5".
And whether the job is a prototype
or large production run, MicroGroup
is well prepared – featuring a tool
making department, which can create tooling for unique requirements.
Flares have been used in many applications, such as stops or as a lead in aid
for insertions. And being highly repeatable with proper preparation and tooling, it is a cost effective solution for
volume applications.
MicroGroup performs flaring on stainless steel and most other exotic alloys.
Specifications of special note include:
For prototype and small to medium
quantities of simple parts,
MicroGroup’s universal tube bending
system is the ideal solution. This
interchangeable system of ready-touse tooling eliminates the need for costly and time-consuming custom
work. Most hypodermic, fractional and standard size tubes can be bent
using this method in the following size allowances:
• Walls as thin as .003" can be flared
• Materials up to 1.25" OD’s and walls
as heavy as .065" are allowable
Beading/Bulging/Upsetting
• OD’s from .015" - .280"
• A radius range or 1.5 times the tube diameter up to a maximum of 1.50"
• Angles from 1° - 120°
End forming processes are great solutions for hose barbs, stops, orientation
and registration applications. And
when the production volumes are high,
the unit costs of production are guaranteed to be low as a result of the
best fit equipment.
For high volume and complex bends, MicroGroup employs dedicated tooling and fixtures and the latest in CNC technology. Single or multi-plane
bends can be performed on multi-axis, dual radius CNC equipment, assuring efficiency and consistency each and every part. CNC delivered tube
bending specifications include:
Specifications are as follows:
• Six-foot lengths maximum
• Tube feed OD range from .015" - .5", bar and wire OD’s from .015" - .252"
• Wall thickness allowance from .003" - .032"
• Walls as thin as .003" can be formed
• OD’s from .025" to 1.25" with walls
as heavy as .020"
Swaging
Punching
Rotary swaging uses a split die with
a desired shape machined into it.
The dies are spun and strike rollers,
closing the dies. As the work piece
enters the swage dies, it is forged
into shape.
Rotary swaging is used to reduce
the diameter of tubes and solids or
to forge a tube over another tube.
Diameters range from .020" to 1.0"
for tubing. Overall lengths can vary
from .25" to 20' or more, with a
maximum pass length of 3" in a single pass dependent on the material size. The ideal swage angle is 15°
included, however, steeper transitions can be considered for production.
MicroGroup has the capability to magazine load certain size ranges of
parts to maximize efficiency for volume projects. Most metals can be
rotary swaged.
Tolerances for swaging vary. Typically, diameter tolerances of ±.005" can
be maintained, but in certain cases, tolerances as tight as ±.001" can be
held. Lengths may vary after swaging and may require an additional step
to cut the part back to the desired length. Swaging can also be performed over a mandrel to achieve a more consistent wall thickness and an
improved ID finish.
18
PROMPT
AND
PERSONAL SERVICE
AT
Shaped dies are used to pierce tubing
or flat stock to create a hole of a specific size or shape, or a component
from flat stock. Punching can be performed on various metals (from stainless steel to brass), is cost effective
and suitable for medium and high volume applications. Thickness of material to be punched affects size and tolerance of punch. Circles are most common, however, since we make dies inhouse other shapes are available.
If you don’t see the tube forming
service you are looking for, send in
a print of your requirements.
MicroGroup makes unique tools
for all types of applications.
800-255-8823
ISO 9002
Registered
Computer Automated Micro-Machining
Specialists
in Stainless Steel
and Titanium
CNC Machining
Complex parts for prototypes or production runs can be machined efficiently
on MicroGroup’s Swiss type, multi-axis CNC machines. Starting with auto
feed tube or bar, precision components can be produced with many unique
design features including; off-center holes, milled slots and stepped diameters, and by using live tooling, the need for secondary operations are minimized. Catheter tips, bone screws, fittings, liposuction wands, aerospace
parts and instrumentation/analytical components are examples of parts that
comfortably fit MicroGroup’s CNC machine capabilities. Specifications include:
Parts as Small as .020"
• Parts diameters as small as .020" up to 2.50"
• Tube/bar feed diameters from 1mm (.039") to 25mm (.984")
• Authorized user of Partmaker 6.0 software in conjunction with SolidWorks
design software
CNC Milling & Drilling
Utilizing the latest equipment, MicroGroup
performs 5 and 7 axis CNC milling, high
speed drilling, reaming, tapping, counterboring and countersinking. Up to 64 different tool positions allow multiple operations in a single set-up. Parts may be
palletized for production volumes, minimizing idle time between operations and
ensuring maximum efficiency in all
machining operations. Tubing, bar, rod,
sheet and plate can be machined in various alloys and engineered materials.
Electrical Discharge Machining (EDM)
The latest in RAM and Wire EDM technology is utilized at MicroGroup. Both
can be used for prototypes or production depending on the specifications and
delivery requirements of the job.
Using an electrode to remove material
(commonly referred to as burning), RAM
EDM allows for the creation of features
not easily produced using traditional
methods. This process is ideal for producing burr free holes, slots or complex
shapes in bar, tube or flat stock. What’s more, RAM EDM is repeatable, offers consistency and is excellent for designs with tight tolerances. MicroGroup machines its own application specific electrodes.
WIRE EDM, also offered by MicroGroup is used for creating precision features on parts. However, distinct from RAM EDM, the WIRE EDM process
employs a wire rather than an electrode for removal of material. As with
RAM EDM, this is a highly repeatable and consistent process that is
excellent for holding tight tolerances. Wire EDM is best used for cutting, and creating skives, notches, bevels as well as oddly cut shapes.
MicroGroup also employs CNC controlled grinding equipment to create tapers and angles on
tubing. This process utilizes a laser profilometer for measuring components
to specification as well as to provide data for statistical process control.
Laser Machining
Electrochemical Grinding (ECG)
Two New Multi-Axis,
Submersible Wire EDM’s
CNC Grinding
MicroGroup uses a variety of CNC tip grinding
machines to create precision points and tips
for needles and more. The advantage of this
method for these applications is that non-standard tip geometries can be produced cost effectively. Additionally, tips can be created on tubing and solids that have other design features.
MicroGroup uses Nd:YAG laser technology in varying platforms to create both
simple and complex components. This
is achieved by adjusting the width of the
laser beam. Cutting, slotting, creating
holes of varying sizes and stent production are all options with this process.
MicroGroup can work with a broad variety of materials with wall thickness ranging from .002" to .090" and OD’s from
.014" to over 3".
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
Burr-free, tight tolerance slots, angled bevels
and cut lengths are produced by MicroGroup’s
electrochemical grinders. Most metals can be
electrochemically cut and ground in diameters
from .004" to 1-1/2", in tubing and solids.
Tolerances of ±.0001" or better can be maintained using electrochemical processes. ECG
can be applied to almost any part that can be
fixtured on a conventional surface grinder, with
results considerably beyond those provided by
conventional methods.
19
ISO 9002
Registered
Closures
Specialists
in Stainless Steel
and Titanium
Tube ends can be closed to customer specifications, with a multitude of tip options available as
detailed in illustrations below. Also, wall thickness tolerances can be maintained throughout the end if
desired. Based on the dimensional and tolerance requirements of the job – and delivery needs,
MicroGroup can employ a variety of manufacturing processes for maximum flexibility.
MicroGroup’s closures can be used for a variety of products from sensor housings to inner and outer
matched arthroscopic surgery cutters.
Type-1:
Tube wall is spun closed completely and the
tip is welded at the center to ensure that
there is no porosity. This process produces
an economical closed tube for the majority of
applications requiring reasonably consistent
wall thickness.
Type-CD:
Tube is spherically self-welded closed resulting in a flat or convex inside shape with a tip
thickness typically several times the wall
thickness.
Type-1T:
Tube is closed to give uniform thickness of
+/- 15% of the parent tube. This design is
particularly useful in extremely sensitive temperature sensing applications and may be the
only method to spherically close extremely
thin tubes.
Type-2D:
Tube is plug welded with a disc usually varying from one to two times the material thickness of the tube.
Type-2CD:
Tube is self-welded closed to a flat end
shape with a resulting tip thickness considerably thicker than the wall.
Type-3:
Tube is formed with a self-welded tip with a
thickness up to five times the tube diameter
to allow material to grind or machine points
or other special shapes without the need of
adding a plug.
20
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
9001:2000
Compliant
Assembly Services – Welding/Brazing
Short Lead Times
Tough Jobs
Laser Micro-Welding
Laser welding offers several advantages
which include: minimal heat effect in the
weld zone, welding of walls as thin as
.002" and process repeatability in prototype through production quantities
because of CNC control. Most metals can
be laser beam welded. It’s also ideal for
welding small, thin-walled objects such as
hypodermic tubing, pacemaker cases,
diaphragms and bellows.
Laser Machining
MicroGroup uses Nd:YAG laser technology
in varying platforms to create both simple
and complex components. This is
achieved by adjusting the width of the
laser beam. Cutting, slotting, creating
holes of varying sizes and stent production are all options with this process.
MicroGroup can work with a broad variety
of materials with wall thickness ranging
from .002" to .090" and OD’s from .014"
to over 3".
MIG Welding
Induction Brazing
Induction Brazing provides precise control
of all process variables yielding the most
consistant results of any brazing process.
A wide variety of materials can be brazed,
including some combinations that are
unweldable. Brazing can be more economical than welding smaller parts and is often
preferred for joining thin sections to thick
sections because reduced heat minimizes
distortion. Brazing is used extensively for
joining many dissimilar material combinations. Inaccessible joint areas that could not be made by gas metal arc, gas tungsten
arc, and spot or seam welding can be joined by brazing.
Fixturing
Customized to meet stringent requirements, MicroGroup performs fixturing
services in-house for prototype and production quantities. We handle fixturing of
both single and multiple parts. And since
MicroGroup has welding experience, we
understand what requirements the fixturing must meet. We also know the idiosyncrasies of tubing, enabling us to always
create the proper fixtures.
Used typically in thicknesses .020" and
up for tubing, sheet and solids, this
process uses filler metals for joining
materials. Exacting assembly tolerances
of +/-.001 can be maintained if specified
and with proper fixturing. Most metals
can be precision MIG welded. It’s also
perfect for producing welds that require a
fillet or for building thickness. MIG is
applicable for prototype to high quantity
production applications.
Micro-Torch Brazing
A wide variety of materials can be brazed,
including some combinations that are
unweldable. Brazing can be more economical than welding smaller parts and is
often preferred for joining thin sections to
thick ones since reduced heat minimizes
distortion. MicroGroup uses state-of-theart equipment to join components, where
other welding techniques are not applicable, such as dissimilar materials and
complex joint configurations.
TIG Micro-Welding
From materials to manufacturing and final assemblies,
let MicroGroup be your one-stop source.
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
MicroGroup uses TIG welding techniques
suited for precision components and
assemblies. MicroGroup designs fixturing
in-house for each application which results
in superior tolerencing and joint finishes.
Walls as thin as .002" can be welded,
but TIG is better suited for thicker walls.
MicroGroup has also developed expertise
in TIG fusion welding, which eliminates
the use of unwanted filler materials.
21
9001:2000
Compliant
Finishing/Post Processing
Catheter Cleaning
Short Lead Times
Tough Jobs
Electropolishing
Microgroup’s custom cleaning equipment
is designed to perform production volume
cleaning on an individual tube basis. ID
and OD cleanliness problems associated
with batch cleaning processes are eliminated by employing automated systems
to clean, rinse, flush solvents, passivate
and purge.
Electropolishing is a controlled chemical
process that removes a slight amount
of the component or tube’s surface. It
helps create a clean and bright surface,
enhances corrosion resistance and
removes feather burrs.
Vacuum Oven
Vibratory Polishing
The use of high vacuum ovens enhance
cleaning and stress relieving. When
employed during the cleaning process
drying is ensured and cleanliness is
improved by the outgassing of trace elements of contaminants. Additionally, pyrogens are removed and corrosion resistance is improved. High vacuum furnaces
also provide contaminant and discoloration
free stress relieving.
Vibrating parts in a special container with
media and detergent removes burrs,
breaks edges, cleans and creates a nice
surface finish. Metal, ceramic, plastic
and other media are used, as well as different detergents. MicroGroup is also
able to meet custom requests.
Pyrolization
Microblasting
In pyrolization, a nitrogen purged container
is loaded with components and heated in
an oven. The resulting pyrogen free parts
are immediately packaged.
In microblasting, the surface of a
component is roughened through blasting
with abrasive media ( including glass
beads, Aluminum Oxide, Silicone carbide
and Sodium carbonate) and air. The
roughened surface allows for better adhesion of plastics to metal during injection
molding. Microblasting creates a nonreflective surface and can be used to
deburr and clean.
Ultrasonic with Filtration
Passivation
Ultrasonic cleaning is a primary method of
removing contaminants and debris from
tubing that has been processed. High frequency soundwaves combine with liquid
media to remove dirt, grease, oil and residual contaminants. The process is quick and
involves a limited handling of parts.
Passivation is a chemical process used to
increase the corrosion inhibiting properties of stainless steel and clean discoloration from welding and cutting.
MicroGroup performs passivation to customer requirements, as well as QQP35
Type VI, Type II and A967-96.
MicroGroup has custom ultrasonic tanks
capable of cleaning small parts of tubing
up to 6 feet in length, in both single
pieces and batches.
MicroGroup provides coating and plating services as required.
Please contact your MicroGroup representative for additional information.
22
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
Stainless Steel
Tube & Hose
Fittings
Most orders shipped
within 24 HOURS!
Economical!
< 1 /32" TO 1" DIAMETERS
< T316 STAINLESS STEEL
< LIGHTWEIGHT
< STOCK AND CUSTOM
< EASY TO USE
< WELD / SOLDER / EPOXY / BRAZE
www.microgroup.com
• RFQ’s
• Ordering
• Product Updates
• And More!
About Tube Fittings
Offering a Unique Concept…
These Stainless Steel tube fittings are fabricated from thin wall tubing in
actual tube OD sizes. Braze/HozeTyte® was created to satisfy the need
for a standard line of versatile fittings compatible with thin wall stainless
steel tubing and suitable for reliable permanent type assemblies.
Material
Over the years, the use of the “Modern Metal” (stainless steel) has
increased steadily. Its corrosion resistant qualities and high strength
characteristics have inspired design engineers to specify stainless.
Now with Braze/HozeTyte®, quality is available at a reasonable cost.
Application
Braze/HozeTyte® fittings lend themselves ideally to industrial applications
in the beverage, chemical, food, marine, medical, photography, refrigeration industries and many other areas.
Advantages
This new line of fittings, as its name implies, is fabricated from thin wall
type 316L stainless steel tubing to provide maximum corrosion resistance with minimum bulk and weight. All elbows incorporate smooth
radius bends for maximum flow and minimum turbulence.
Because Braze/HozeTyte® fittings utilize thin wall tubing, they are light in
weight and provide larger tube inside dimensions for increased capacity
and flow. These fittings afford a substitute for the present heavy machined
fittings produced from bulky expensive forgings. Braze/HozeTyte’s construction facilitates the use of thin wall tubing throughout the complete system.
Installation costs are reduced, because Braze/HozeTyte fittings are easy
to use. Special tools are not required and quick connections may be
made utilizing standard processing.
How to Specify BrazeTyte® Tube Fittings
Methods for Installing BrazeTyte® Fittings
Nomenclature:
BrazeTyte® fitting part numbers are constructed from symbols that identify
the size and style of the fitting.
The most effective means for making a stainless connection is by either
soldering, brazing or welding. Such joints are strong, leak-tight, corrosion
resistant, economical and have a good appearance. BrazeTyte tube fittings are designed to provide for these assembly methods.
The dash numbers indicate tube OD size by 1/16 inches, thus -4 means
4/16" or 1/4", -10 means 10/16" or 5/8", etc. The first series of numbers
identifies the style or configuration of the fitting. The letters designate
combinations of male, female and swivel ends of the part (see below).
Letter Designation
FF
MM
MF
SF
SM
All Female
All Male
Male and Female
Swivel and Female
Swivel and Male
Example: 15MF-8
15
MF
-8
style
TEE
male run
male
and
female
tube OD
size
1/2"
How to Specify HozeTyte® Tube Fittings
Nomenclature:
HozeTyte® fitting part numbers are constructed from symbols that identify
the size and style of the fitting.
The first dash number indicates hose ID size by 1/16 inches, thus -4
means 4/16" or 1/4", -10 means 10/16" or 5/8", etc. The first series
of numbers identifies the style or configuration of the fitting. The letters
designate combinations of male, hose and pipe ends of the part.
Pipe ends are designated by the dash number. These are not outside
diameters, but rather standard NPTF screw thread sizes.
Letter Designation
HH
MH
PH
All Hose
Male and Hose
Pipe and Hose
Example: 90MH-8
90
MH
-8
style
90°
elbow
male
and
hose
hose ID
size
1/2"
Soldering and Brazing
Soldered or brazed joints resist most corrosive media. The very nature of
the process leaves only a small seam exposed to atmosphere. It is
important to choose the proper solder or brazing alloy and this is usually
determined by the application and environment of the assembly being
fabricated. Certain alloys are formulated with precious metals which give
them corrosive resistance equal to stainless steel itself.
Soldered or brazed stainless steel connections are extremely strong in
both tensile and shear strength. This high strength characteristic is
based on the ability of molten brazing alloy to penetrate and fill the gap
between bonding areas through “capillary action.”
Welding
The other means of making a permanent joint with BrazeTyte fittings is by
welding. Depending upon the configuration chosen, connections may be
made by either of two basic methods, Butt or Lap welding. The technique
chosen will be governed by the actual tubing application, the welding
equipment available and the skill of the welding operator.
Bonding with Epoxy
BrazeTyte fittings can also be assembled using epoxy adhesives. Epoxy
provides a permanent joint for low pressure assemblies and is an easy,
inexpensive method to accomplish a connection. A joint may be made
quickly, using unskilled labor and simple techniques.
There are many types of commercial and industrial epoxy adhesives on
the market. These usually are offered as two component kits, one part
being the catalyst which activates the curing of the material. Curing methods of these epoxy adhesives vary. Some cure at room temperatures and
in other cases curing is accelerated by the application of heat.
Properly prepared and fully cured bonds are possible that will yield tensile
shear strengths of up to 3,500 psi when tested at room temperature.
Epoxy adhesive is not recommended for systems where temperatures
exceed 200° or for use with certain chemicals that might tend to attack
the epoxy joint. The manufacturer usually supplies this type of information in the form of chemical corrosion resistance table.
24
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
Brazetyte® Fittings
Cup Dimensions
Transition
Male <> Male
The chart below is a reference guide to be used
for your convenience listing the dimensions of
each item number by size.
Item #
O.D.
Wall
A
B(Cup Depth)
-4
-5
-6
-8
-10
-12
-16
-20
-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
.254
.316
.379
.504
.629
.754
1.005
1.255
1.505
1/4
1/4
1/4
5/16
7/16
1/2
3/4
13/16
15/16
Used as a reducer or expander to accomplish a
change in O.D. size. Can be employed in conjunction with any MF, FF or SF style fitting to
obtain a reduced or expanded male end. Also
can be used as a butt weld connector when a
change in O.D. is desired.
A
Call or
access
web
for
pricing
Tol: A = ± .005 B = ± .032
Cap
Female Closed
Item #
Sizes
5MM-4-5
5MM-4-6
5MM-5-6
5MM-6-8
5MM-8-10
5MM-8-12
5MM-l0-12
5MM-12-16
5MM-16-20
5MM-16-24
5MM-20-24
Wall
1/4 x 5/16
1/4 x 3/8
5/16 x 3/8
3/8 x 1/2
1/2 x 5/8
1/2 x 3/4
5/8 x 3/4
3/4 x 1
1 x 1-1/4
1 x 1-1/2
1-1/4 x 1-1/2
A
.025
.025
.025
.032
.035
.035
.035
.049
.049
.049
.049
$ ea
Call or
access
web
for
pricing
31/32
15/16
1-1/165
1-5/16
1-7/16
1-7/16
1-7/16
2-1/2
2-1/2
2-1/8
2-7/16
Used to terminate a line or fitting. Fits over male
end of BrazeTyte fitting or over the O.D. of tubing.
A
D
Item #
Sizes
Wall
A
$ ea
10F-4
10F-5
10F-6
10F-8
10F-10
10F-12
10F-16
10F-20
10F-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.032
.032
.032
.032
.032
.049
.049
.049
.049
1/4
1/4
1/4
5/16
7/16
1/2
3/4
13/16
15/16
Call or
access
web
for
pricing
Male OD <> Female ID
C C
Used as an adapter where an expansion from a
smaller OD to a larger OD is required. Can be
employed in conjunction with the 10FF union to
join different OD sizes of tubing. May also be
utilized with any MF, FF or SF style fitting.
A
Reducing Union
C
Female <> Female: in tube OD sizes
Used as a coupling. Both ends will accept either
tube OD or male end of BrazeTyte fitting.
A
Item #
Expander
BB
B
Sizes
5FF-5-4
5FF-6-4
5FF-6-5
5FF-8-6
5FF-10-8
5FF-12-8
5FF-12-10
5FF-16-12
5FF-20-16
5FF-24-16
5FF-24-20
Wall
5/16 x 1/4
3/8 x 1/4
3/8 x 5/16
1/2 x 3/8
5/8 x 1/2
3/4 x 1/2
3/4 x 5/8
1 x 3/4
1-1/4 x 1
1-1/2 x 1
1-1/2” x 1-1/4”
.025
.025
.025
.032
.035
.035
.035
.049
.049
.049
.049
A
7/8
2-7/32
1
1-1/4
1-5/16
1-5/16
1-5/16
2-3/8
2-3/8
2
2-5/16
10MF-4-5
10MF-4-6
10MF-5-6
10MF-6-8
10MF-8-10
10MF-8-12
10MF-10-12
10MF-12-16
10MF-16-20
10MF-16-24
10MF-20-24
Sizes
1/4 x 5/16
1/4 x 3/8
5/16 x 3/8
3/8 x 1/2
1/2 x 5/8
1/2 x 3/4
5/8 x 3/4
3/4 x 1
1” x 1-1/4
1” x 1-1/2
1-1/4 x 1-1/2
Wall
A
B
.025
.025
.025
.032
.035
.035
.035
.049
.049
.049
.049
15/16
7/8
1-1/32
1-9/32
1-3/8
1-3/8
1-3/8
2-7/16
2-7/16
2-1/16
2-3/8
C
1/4
1/4
5/16
3/8
1/2
1/2
5/8
3/4
1
1
1-1/4
.316
.379
.379
.504
.629
.754
.754
1.005
1.255
1.505
1.505
$ ea
Call or
access
web
for
pricing
Union
A
Female <> Female
tube OD or male end of BrazeTyte fitting. When
connecting different OD sizes, either the 5MF
reducer or the 10MF expander should be employed.
B
Item #
10FF-4
10FF-5
10FF-6
10FF-8
10FF-10
10FF-12
10FF-16
10FF-20
10FF-24
Sizes
Wall
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
PROMPT
AND
A
15/16
1
1
1-5/32
1-11/32
1-9/16
2-1/4
2-1/2
2-11/16
B
11/16
3/4
3/4
27/32
29/32
1-1/16
1-1/2
PERSONAL SERVICE
B
5MF-5-4
5MF-6-4
5MF-6-5
5MF-8-6
5MF-10-8
5MF-12-8
5MF-12-10
5MF-16-12
5MF-20-16
5MF-24-16
5MF-24-20
$ ea
Call or
access
web
for
pricing
Male OD <> Female ID
C
Used as an adapter where a reduction from larger OD to a smaller OD is required. Can be
employed in conjunction with any MF, FF or SF
style fitting to reduce female BrazeTyte end.
A
Item #
C
.254
.254
.316
.379
.504
.504
.629
.754
1.005
1.005
1.255
Reducer
D
Item #
B
.316
.379
.379
.504
.629
.754
.754
1.005
1.255
1.505
1.505
Sizes
5/16 x 1/4
3/8 x 1/4
3/8 x 5/16
1/2 x 3/8
5/8 x 1/2
3/4 x 1/2
3/4 x 5/8
1- x 3/4
1-1/4 x 1
1-1/2 x 1
1-1/2 x 1-1//4
Wall
A
.025
.025
.025
.032
.035
.035
.035
.049
.049
.049
.049
15/16
7/8
1-1/32
1-9/32
1-3/8
1-3/8
1-3/8
2-7/16
2-7/16
2-1/16
2-3/8
B
5/16
3/8
3/8
1/2
5/8
3/4
3/4
1
1-1/4
1-1/2
1-1/2
C
.254
.254
.316
.379
.504
.504
.629
.754
1.005
1.005
1.225
$ ea
Call or
access
web
for
pricing
Customs Made To Order!
$ ea
Call or
access
web
for
pricing
From materials to manufacturing and final assemblies,
let MicroGroup be your one-stop source.
AT
800-255-8823
25
45° Elbow
A
90° Elbow
Male <> Male
A
R
Item #
Sizes
Wall
45MM-4
45MM-5
45MM-6
45MM-8
45MM-10
45MM-12
45MM-16
45MM-20
45MM-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
Male <> Male
A
For direct assembly into machined ports and
flanges or into female BrazeTyte expansions.
can be used as a Butt-Weld fitting.
R
A
3/8
15/32
9/16
3/4
15/16
1-1/8
1-1/2
1-7/8
2-1/4
19/32
5/8
21/32
25/32
1
1-7/32
1-19/32
1-27/32
2-1/16
Can be used as a Butt-Weld fitting.
R
A
$ ea
Item #
Sizes
Wall
Call or
access
web
for
pricing
90MM-4
90MM-5
90MM-6
90MM-8
90MM-10
90MM-12
90MM-16
90MM-20
90MM-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
R
A
3/8
15/32
9/16
3/4
15/16
1-1/8
1-1/2
1-7/8
2-1/4
Male <> Female
Male <> Female
For direct assembly into machined ports or into
female BrazeTyte expansions, female end will
accept tube OD or male end of BrazeTyte fitting.
When connecting different OD sizes, either the 5MF
reducer or the 10MF expander can be employed.
Tube O.D.
Tube Wall
Radius R
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
3/8
15/32
9/16
3/4
15/16
1 1/8
1 1/2
1 7/8
2 1/4
45MF-4
45MF-5
45MF-6
45MF-8
45MF-10
45MF-12
45MF-16
45MF-20
45MF-24
B
A
B
19/32
5/8
21/32
25/32
1
1 7/32
1 19/32
1 27/32
2 1/16
17/32
9/16
19/32
25/32
1
1 7/32
1 19/32
1 27/32
2 1/16
$ ea
Call or
access
web
for
pricing
A
R
B
Item #
90MF-4
90MF-5
90MF-6
90MF-8
90MF-10
90MF-12
90MF-16
90MF-20
90MF-24
Sizes
Wall
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
R
A
3/8
15/32
9/16
3/4
15/16
1-1/8
1-1/2
1-7/8
2-1/4
Item #
Sizes
Wall
45FF-4
45FF-5
45FF-6
45FF-8
45FF-10
45FF-12
45FF-16
45FF-20
45FF-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
R
B
3/8
15/32
9/16
3/4
1-5/16
1-1/8
1-1/2
1-7/8
2-1/4
17/32
9/16
5/8
25/32
1
1-7/32
1-19/32
1-27/32
2-1/16
3/4
27/32
15/16
1-1/4
1-1/2
1-7/8
2-15/32
2-15/16
3-13/32
$ ea
Call or
access
web
for
pricing
90° Elbow
B
tube OD or male end of BrazeTyte fitting. When connecting different OD sizes, either the 5MF reducer
or the 10MF expander should be employed.
R
B
13/16
29/32
1
1-1/4
1-1/2
1-7/8
2-15/32
2-15/16
3-13/32
45° Elbow
Female <> Female
A
Call or
access
web
for
pricing
90° Elbow
45° Elbow
Item #
$ ea
13/16
29/32
1
1-1/4
1-1/2
1-7/8
2-15/32
2-15/16
3-13/32
$ ea
Call or
access
web
for
pricing
Both ends will accept either tube OD or male end
of BrazeTyte fittings When connecting different
OD sizes, either the 5MF reducer or the l0MF
expander should be employed.
R
B
Item #
90FF-4
90FF-5
90FF-6
90FF-8
90FF-10
90FF-12
90FF-16
90FF-20
90FF-24
Female expansions both ends
Sizes
Wall
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
R
B
3/8
15/32
9/16
3/4
15/16
1-1/8
1-1/2
1-7/8
2-1/4
3/4
27/32
15/16
1-1/4
1-1/2
1-7/8
2-15/32
2-15/16
3-13/32
$ ea
Call or
access
web
for
pricing
A
A
Tee
Tee
Male three ends
B
Female <> Female - Female
B
flanges or into female BrazeTyte expansions. Can
be used as a Butt- Weld fitting.
B
26
B
Item #
Sizes
Wall
A
30MM-5
30MM-6
30MM-8
30MM-10
30MM-12
30MM 16
30MM 20
30MM 24
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
1-3/16
1-3/8
1-5/8
2
2-3/8
3-1/4
3-5/8
4-1/8
PROMPT
AND
B
19/32
11/16
13/16
1
1- 3/16
1- 5/8
1- 13/16
2-1/16
PERSONAL SERVICE
$ ea
Call or
access
web
for
pricing
AT
Item #
Sizes
Wall
30FF-4
30FF-5
30FF-6
30FF-8
30FF10
30FF-12
30FF-16
30FF-20
30FF-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
800-255-8823
All ends accept either tube OD or male end of
BrazeTyte fitting. When used to join different OD
sizes, either the 5MF reducer or the 10MF
expander can be employed.
A
1-3/16
1-3/8
1-3/8
1-5/8
2
2-3/8
3-1/4
3-5/8
4-1/8
B
19/32
11/16
11/16
13/16
1
1-3/16
1-5/8
1-13/16
2-1/16
$ ea
Call or
access
web
for
pricing
A
Tee
A
D
D
Tee
Female <> Female - Male
B
B
Item #
20MF-5
20MF-6
20MF-8
20MF-10
20MF-12
20MF-16
20MF-20
20MF-24
Male <> Female - Female
Male for direct assembly into machined ports or into
female BrazeTyte expansions. Female ends to
accept tube OD or male ends of BrazeTyte fittings.
When used to join different OD sizes, either the 5MF
Sizes
Wall
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
A
B
1-1/16
1-1/4
1-5/8
2
2-3/8
3-1/4
3-5/8
4-1/8
$ ea
19/32
11/16
13/16
1
1-3/16
1-5/8
1-13/16
2-1/16
Call or
access
web
for
pricing
180° Return Bend
Can be used as a Butt-Weld fitting.
Tube O.D.
Tube Wall
Radius R
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
3/8
15/32
9/16
3/4
15/16
1 1/8
1 1/2
1 7/8
2 1/4
180MM-4
180MM-5
180MM-6
180MM-8
180MM-10
180MM-12
180MM-16
180MM-20
180MM-24
A
13/16
29/32
1
1 1/4
1 9/16
1 7/8
2 15/32
2 15/16
3 13/32
B
D
B
Item #
Sizes
Wall
15MF-5
15MF-6
15MF-8
15MF-10
15MF-12
15MF-16
15MF-20
15MF-24
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
C
$ ea
3/4
15/16
1 1/8
1 1/2
1 7/8
2 1/4
3
3 3/4
4 1/2
Call or
access
web
for
pricing
A
B
1-1/8
1-5/16
1-5/8
2
2-3/8
3-1/4
3-5/8
4-1/8
$ ea
17/32
5/8
13/16
1
1-3/16
1-5/8
1-13/16
2-1/16
Call or
access
web
for
pricing
Adapter
37°
her s
r Ot ration
o
f
l
Cal onfigu
C
Male <> Male
Item #
Male run for direct assembly into machined ports or
into female BrazeTyte expansions. Female ends to
accept tube OD or male ends of BrazeTyte fittings.
When used to join different OD sizes, either the 5MF
D
Male <> Flare
Used to provide an easy sub-assembly disconnect Male end assembles into machine ports or
female BrazeTyte expansions. Swivel end mates
with SAE 37°, JIC 37° and AN/MS 37° flare type
fittings. Type 303 Nut & Sleeve
Item #
Sizes
Wall
HEX
Thread
10SM-4
10SM-5
10SM-6
10SM-8
10SM-10
10SM-12
10SM-16
10SM-20
10SM-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
9/16
5/8
11/16
7/8
1
1-1/4
1-1/2
2
2-1/4
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1-1/16-12
1-5/16-12
1-5/8-12
1-7/8-12
A
$ ea
1-1/32
1-1/8
1-1/8
1-9/32
1-15/32
1-29/32
2-9/16
3-1/32
3-7/32
Call or
access
web
for
pricing
180° Return Bend
Male <> Female
Adapter
°
r 37
the ions
O
r
l fo rat
Cal onfigu
C
D
Female <> Flare
Used to provide an easy sub-assembly disconnect. Female end to accept tube OD or male ends
of BrazeTyte fittings. Swivel end mates with SAE
370, JIC 37° and AN/MS 37° flare type
50 Piece
fittings. Type 303 Nut & Sleeve
A
Item #
180MF-4
180MF-5
180MF-6
180MF-8
180MF-10
180MF-12
180MF-16
180MF-20
180MF-24
Tube O.D. Tube Wall
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
Radius R
3/8
15/32
9/16
3/4
15/16
1 1/8
1 1/2
1 7/8
2 1/4
A
B
13/16
29/32
1
1 1/4
1 9/16
1 7/8
2 15/32
2 15/16
3 13/32
3/4
15/16
1 1/8
1 1/2
1 7/8
2 1/4
3
3 3/4
4 1/2
C
3/4
27/32
15/16
1 1/4
1 9/16
1 7/8
2 15/32
2 15/16
2 13/32
$ ea
Call or
access
web
for
pricing
Minimum
Item #
Sizes
Wall
HEX
Thread
10SF-4
10SF-5
10SF-6
10SF-8
10SF-10
10SF-12
10SF-16
10SF-20
10SF-24
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
9/16
5/8
11/16
7/8
1
1-1/4
1-1/2
2
2-1/4
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1-1/16-12
1-5/16-12
1-5/8-12
1-7/8-12
A
D
$ ea
1-1/32
1-1/8
1-1/8
1-9/32
1-15/32
1-29/32
2-9/16
3-1/32
3-7/32
25/32
7/8
7/8
31/32
1-1/32
1-13/32
1-13/16
Call or
access
web
for
pricing
180° Return Bend
Female <> Female
Both ends will accept either tube OD or male end
of BrazeTyte fittings. When connecting different
OD sizes, either the 5MF reducer or the 10MF
expander should be employed.
Item #
180FF-4
180FF-5
180FF-6
180FF-8
180FF-10
180FF-12
180FF-16
180FF-20
180FF-24
Tube O.D.
Tube Wall
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
.025
.025
.028
.032
.035
.042
.049
.049
.049
Radius R
3/8
15/32
9/16
3/4
15/16
1 1/8
1 1/2
1 7/8
2 1/4
C
3/4
15/16
1 1/8
1 1/2
1 7/8
2 1/4
3
3 3/4
4 1/2
B
3/4
27/32
15/16
1 1/4
1 9/16
1 7/8
2 15/32
2 15/16
2 13/32
$ ea
Call or
access
web
for
pricing
From materials to manufacturing and
final assemblies, let MicroGroup
be your one-stop source.
All dimensions are in inches unless designated millimeters (mm).
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
27
Hozetyte® Fittings
Adapter
Ideally suited for industrial applications in the following industries:
•
•
•
•
•
Beverage
Chemical
Food
Hydraulic
Marine
•
•
•
•
A
Medical
Photography
Refrigeration
And Others
Male Tube <> Hose Bead
Used to connect a flexible non-metallic hose to a
vessel (feed tank, reservoir, etc). Male end can
be brazed or welded.
Please refer to page 24 for How to Specify HozeTyte information.
Item #
Sizes
Wall
10MH-4
10MH-6
10MH-8
10MH-10
10MH-12
10MH-16
10MH-20
10MH-24
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
A
$ ea
Call or
access
web
for
pricing
1-23/32
1-23/32
1-23/32
1-25/32
1-27/32
1-27/32
1-27/32
1-7/8
Connector
90° Elbow
A
Hose Bead <> Hose Bead
Item #
Sizes
Wall
A
$ ea
10HH-4
10HH-6
10HH-8
10HH-10
10HH-12
10HH-16
10HH-20
10HH-24
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/4
.025
.028
.032
.035
.042
.049
.049
.049
3
3
3
3
3
3
3
3
Call or
access
web
for
pricing
B
R
vessel (feed tank, reservoir etc.) where a 90° angle
is required. Male end can be brazed or welded.
R
B
Item #
90MH-4
90MH-6
90MH-8
90MH-10
90MH-12
90MH-16
90MH-20
90MH-24
Sizes
Wall
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
45° Elbow
A
A
B
13/16
1
1-1/4
1-1/2
1-7/8
2-15/32`
2-15/16
3-13/32
$ ea
1-7/8
2-1/16
2-1/4
2-3/8
2-5/8
3
3-3/8
3-3/4
vessel (feed tank, reservoir, etc.) where a 45° angle
is required. Male end can be brazed or welded.
Used to connect a flexible non-metallic
hose to a female pipe port.
Sizes
Wall
R
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
3/8
9/16
3/4
7/8
1-1/8
1-1/2
1-7/8
2-1/4
A
B
3/4
7/8
1-3/32
1-5/16
1-5/8
2-5/32
2-17/32
2-15/16
A
$ ea
1-13/16
1-15/16
2-3/32
2-3/16
2-3/8
2-11/16
2-31/32
3-1/4
Call or
access
web
for
pricing
50 Piece
Minimum
Item #
10PH-4
10PH-6
10PH-8
10PH10
10PH-12
10PH-16
10PH-20
10PH-24
Sizes
Wall
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
45° Elbow
A
2-1/8
2-1/4
2-3/8
2-1/2
2-9/16
2-11/16
2-13/16
3
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
$ ea
45PH-4
45PH6
45PH-8
45PH-10
45PH-12
45PH16
45PH20
45PH24
Sizes
Wall
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
R
3/8
9/16
3/4
7/8
1-1/8
1-1/2
1-7/8
2-1/4
A
1-1/8
1-13/32
1-3/4
21/32
2-11/32
3
3-19/32
4-1/32
B
1-13/16
1-15/16
2-3/32
2-3/16
2-3/8
2-11/16
2-31/32
3-1/4
HEX
NPT
7/16
5/8
11/16
7/8
1-1/16
1-3/8
1-3/4
2
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
$ ea
Call or
access
web
for
pricing
Call or
access
web
for
pricing
Male Pipe Thread <> Hose bead
R
female pipe port where a 45° angle
50 Piece
is required.
NPT
7/16
5/8
11/16
7/8
1-1/16
1-3/8
1-3/4
2
90° Elbow
A
Male Pipe Thread <> Hose Bead
HEX
pipe port where a 90° angle is
50 Piece
required.
B
Minimum
Item #
Call or
access
web
for
pricing
Adapter
A
Male Pipe Thread <> Hose Bead
45MH-4
45MH-6
45MH-8
45MH-10
45MH-12
45MH-16
45MH-20
45MH-24
R
R
3/8
9/16
3/4
7/8
1-1/8
1-1/2
1-7/8
2-1/4
Item #
B
A
Used as a connector to join flexible non-metallic
hoses.
Minimum
Item #
90PH-4
90PH-6
90PH-8
90PH-10
90PH-12
90PH-16
90PH-20
90PH-24
Sizes
Wall
R
A
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
.025
.028
.032
.035
.042
.049
.049
.049
3/8
9/16
3/4
7/8
1-1/8
1-1/2
1-7/8
2-1/4
1-7/32
1-17/32
1-29/32
2-7/32
2-19/32
3-5/16
3
4-17/32
B
1-7/8
2-1/16
2-1/4
2-3/8
2-5/8
3
3-3/8
3-3/4
HEX
NPT
$ ea
7/16
5/8
11/16
7/8
1-1/16
1-3/8
1-3/4
2
1/8
1/4
3/8
1/2
3/4
1
1-/14
1-1/2
Call or
access
web
for
pricing
28
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
Miniature ModuLUER
Fittings & Valves
Stock
•
Custom
FITTINGS
< LUER
< THREADED
< PIPE
< BARBED
< ELBOWS & TEES
< TAPER GAUGES
VALVES
< SPINDLE
< TRUMPET
< 3 - WAY PLUG VALVE
www.microgroup.com
• RFQ’s
• Ordering
• Product Updates
• And More!
®
ISO 594/1,-2
or
ANSI/HIMA
ModuLUER® Luer Fittings, Valves & Inspection Gauges
Short Lead Times
Tough Jobs
• Manufactured to ISO 594/1,-2
• Immediate Delivery
• Over 2,000 Combinations
• T316 Stainless Steel
• Nickel Plated Brass
• Delrin
• Titanium & Other Materials
• Specials Become Standard
ISO 594/1,2
All fittings are made to the ISO 594/1-1986 and ISO 594/2-1991
Standards which cover conical fittings with a 6% luer taper. Together,
these ISO Standards replace the ISO Recommendation R 594-1967
for conical fittings made of rigid and semi-rigid materials for use with
hypodermic syringes and needles and with certain other apparatus
for medical use.
Applying the most recent ISO Standards to the manufacturing processes
of our Luer fittings allows us to offer our customers the most up-to-date
products available on the market. If you do require luers made to
ANSI/HIMA standards, they are still being manufactured and there are
many in stock in both brass and stainless steel. Feel free to call for more
information if you need a special fitting designed, or if you are unsure of
the fitting to correctly suit your needs.
• Stock Luers
• Machined Parts
• Custom
• Laser Welded Assemblies
See our extensive list of standards on the following pages. If you cannot
find the one you’re looking for in our standards, send us any drawings or
application descriptions you have. We will be glad to work with you to get
you the exact fitting you need.
The basic concept of the ModuLUER line of Luer fittings is that all
standards and components are in stock. With our extensive precision
welding capabilities and these stocked parts, almost any fitting
configuration has a short lead time.
Your “special” is probably already sitting on our shelf.
Over 2,000 Combinations Available!
Do you have a special application that requires a unique configuration? Let MicroGroup assist you in designing a configuration from
over 2,000 combinations available from ModuLUER components listed. Call now and let’s work together on that new design!
30
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
ISO 594/1,-2
or
ANSI/HIMA
ModuLUER® Luer Fittings, Valves & Inspection Gauges
Short Lead Times
Tough Jobs
Male Luer (ML)*
Female Straight Thread (FT)
Male Luer-Lock (MLL)*
Female Pipe Thread (FP)
Rotating Male Luer-Lock (MLRL)*
Barb (B)
Female Luer (FL)
Caps (CAP)
Female Luer Thread (FLT)
Elbows (E)
Male Straight Thread (MT)
Tees (T)
Male Pipe Thread (MP)
Standard Part Numbering
Ex.:
Alloy 316
316
NPB
BRS
316 Stainless Steel
Nickel Plated Brass
360 Brass
Note: Other materials available
upon request.
Left Termination MLL
B032
B062
B125
B188
B250
Cap2528
Cap2532
1/32" Barb
1/16" Barb
1/8" Barb
3/16" Barb
1/4" Barb
1/4-28 Cap
1/4-32 Cap
FL
FLT
FP125
FT1032
FT2528
FT2532
Female Luer
Female Luer Thread
1/8" Female Pipe
10-32 Female Thread
1/4-28 Female Thread
ML
MLL
MLRL
MP062
MP125
MP250
MT1032
MT2528
MT2532
NUT
SK
Male Luer
Male Luer Lock
Rotating Male Luer Lock
1/16" Male Pipe
1/8" Male Pipe
1/4" Male Pipe
10-32 Male Thread
1/4-28 Male Thread
1/4-32 Male Thread
Nut
Sinker
P/N #316 - MLL/BHB062-6H2
Right Termination BHB062
B032
B062
B125
B188
B250
BHB032
BHB062
BHB125
FL
FLT
1/32" Barb
1/16" Barb
1/8" Barb
3/16" Barb
1/4" Barb
1/32" Bulkhead Barb
1/16" Bulkhead Barb
1/8" Bulkhead Barb
Female Luer
Female Luer Thread
FT1032
FT2528
FT2532
Hub
ML
MLL
MLRL
MP062
MP125
MP250
MT1032
MT2528
MT2532
10-32 Female Thread
Hub
Male Luer
Male Luer Lock
Rotating Male Luer Lock
1/16" Male Pipe
1/8" Male Pipe
1/4" Male Pipe
10-32 Male Thread
1/4-28 Male Thread
1/4-32 Male Thread
Body Diameter 6
1
2
3
4
5
6
7
1/16"
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
8
9
10
11
12
1/2"
9/16"
5/8"
11/16"
3/4"
Fitting
Inside Diameter 2
Body Type H
H
K
R
S
E
T
Hex Body
Knurl Body
Round Body
Square Body
Elbow
Tee
1
2
3
4
B
.018/.020
.060/.062
.093/.094
.122/.128
No Bore
smallest I.D.
E = .425
T = .425
We also manufacture
Tuohy Borst compression style
connectors. Please refer to
page 42 for additional details.
* • As an option we can add “O-Rings” to male LUERS and LUER Locks.
• Actual barb O.D.’s are manufactured oversized (refer to page 38).
• E.P.D.M. rubber washers on all male straight threads available upon request.
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
31
ISO 594/1,-2
or
ANSI/HIMA
Short Lead Times
Tough Jobs
Male LUER
Male ModuLUER fittings are manufactured to ISO 594/1,-2 and are
available in several modular lengths and sections. Specials quoted on
request.
Call For Quantity Discounts
Design Your Own Fitting
24 hrs.! ▼
316-ML-4R3
NPB-ML-4R3
316-ML-4RB
316-ML-5HB
NPB-ML-5KB
316-ML-6H3
NPB-ML-5K3
316-ML/B062-6H2
NPB-ML/B062-5K2
316-ML/B125-6H3
NPB-ML/B125-5K3
316-ML/B188-6H3
NPB-ML/B188-6K3
316-ML/B250-6H3
NPB-ML/B250-6K3
316-ML/BH-6H3
316-ML/BHB032-6H1
316-ML/BHB062-6H2
NPB-ML/BHB062-6K2
316-ML/BHB125-6H3
NPB-ML/BHB125-6K3
316-ML-6HB
For further details – refer to
www.microgroup.com
32
316-ML/FL-6H3
316-ML/FLT-6H3
NPB-ML/FLT-5K3
316-ML/FP125-9H3
316-ML/FT1032-6H3
NPB-ML/FT1032-6H3
316-ML/FT2528-6H3
NPB-ML/FT2528-6H3
316-ML/FT2532-6H3
NPB-ML/FT2532-6H3
316-ML/ML-6H3
NPB-ML/ML-6K3
316-ML/MLL-6H3
NPB-ML/MLL-6K3
316-ML/MP062-6H3
NPB-ML/MP062-6H3
316-ML/MP125-7H3
NPB-ML/MP125-7H3
316-ML/MP250-9H3
NPB-ML/MP250-9H3
316-ML/MT1032-6H3
NPB-ML/MT1032-6H3
316-ML/MT2528-6H3
NPB-ML/MT2528-6H3
316-ML/MT2532-6H3
NPB-ML/MT2532-6H3
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
ISO 594/1,-2
or
ANSI/HIMA
Short Lead Times
Tough Jobs
Male LUER Lock
Male-LUER-Lock ModuLUER fittings are manufactured to ISO 594/1,-2
and are available in several modular lengths and sections. Specials quoted on request.
24 hrs.! ▼
316-MLL-6H3
NPB-MLL-6K3
316-MLL-6HB
NPB-MLL-6KB
316-MLL-6R3
316-MLL-6RB
NPB-MLL-6RB
316-MLRL-6R3-WP
316-MLL/B032-6H1
316-MLL/B062-6H2
NPB-MLL/B062-6K2
316-MLL/B125-6H3
NPB-MLL/B125-6K3
316-MLL/B188-6H3
NPB-MLL/B188-6K3
316-MLL/B250-6H3
NPB-MLL/B250-6K3
316-MLL/BH-6H3
316-MLL/BHB032-6H1
NPB-MLL/BHB032-6K1
316-MLL/BHB062-6H2
NPB-MLL/BHB062-6K2
316-MLL/BHB125-6H3
NPB-MLL/BHB125-6K3
316-MLL/FL-6H3
NPB-MLL/FL-6K3
316-MLL/FLT-6H3
NPB-MLL/FLT-6K3
316-MLL/MLL-6H3
316-MLL/FP125-9H3
NPB-MLL/FP125-9H3
316-MLL/FT1032-6H3
NPB-MLL/FT1032-6H3
316-MLL/FT2528-6H3
NPB-MLL/FT2528-6H3
316-MLL/FT2532-6H3
NPB-MLL/FT2532-6H3
316-MLL/MP062-6H3
NPB-MLL/MP062-6H3
316-MLL/MP125-7H3
NPB-MLL/MP125-7H3
316-MLL/MP250-9H3
NPB-MLL/MP250-9H3
316-MLL/MT1032-6H3
NPB-MLL/MT1032-6H3
316-MLL/MT2528-6H3
NPB-MLL/MT2528-6H3
316-MLL/MT2532-6H3
NPB-MLL/MT2532-6H3
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
33
ISO 594/1,-2
or
ANSI/HIMA
Short Lead Times
Tough Jobs
Female LUER
Female ModuLUER fittings are manufactured to ISO 594/1,-2 and
are available in several modular lengths and sections. Specials quoted
on request.
24 hrs.! ▼
316-FL-4R3
316-FL-5H3
316-FL-5HB
NPB-FL-5KB
316-FL/HUB-5HB
NPB-FL/HUB-5KB
316-FL-6H3
316-FL/B032-5H1
316-FL/B062-5H2
NPB-FL/B062-5K2
316-FL/B125-5H3
NPB-FL/B125-5K3
316-FL/B188-6H3
NPB-FL/B188-6K3
316-FL/B250-6H3
NPB-FL/B250-6K3
316-FL-6HB
www.microgroup.com
34
316-FL/BH-6H3
316-FL/BHB032-6H1
316-FL/BHB062-6H2
316-FL/BHB125-6H3
NPB-FL/BHB125-6K3
316-FL/FL-5H3
NPB-FL/FL-5K3
316-FL/FT1032-6H3
NPB-FL/FT1032-6H3
316-FL/FT2528-6H3
NPB-FL/FT2528-6H3
316-FL/FT2532-6H3
NPB-FL/FT2532-6H3
316-FL/FP-125-9H3
NPB-FLT/FP125-9H3
316-FL/MT1032-5H3
NPB-FL/MT1032-5H3
316-FL/MT2528-5H3
NPB-FL/MT2528-5H3
316-FL/MT2532-5H3
NPB-FL/MT2532-5H3
316-FL/MP062-6H3
316-FL/MP125-7H3
NPB-FL/MP125-7H3
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
316-FL/MP250-9H3
ISO 594/1,-2
or
ANSI/HIMA
Short Lead Times
Tough Jobs
Female LUER Thread
Female LUER Threads ModuLUER fittings are manufactured to
ISO 594-1,-2 and are available in several modular lengths and sections.
Specials quoted on request.
24 hrs.! ▼
316-FLT-4R3
316-FLT-5H3
NPB-FLT-5K3
316-FLT-5HB
NPB-FLT-5KB
316-FLT/HUB-5HB
NPB-FLT/HUB-5KB
316-FLT-6H3
NPB-FLT-6K3
316-FLT/B032-5H1
NPB-FLT/B032-5K1
316-FLT/B062-5H2
NPB-FLT/B062-5K2
316-FLT/B125-5H3
NPB-FLT/B125-5K3
316-FLT/B188-6H3
NPB-FLT/B188-6K3
316-FLT/B250-6H3
NPB-FLT/B250-6K3
316-FLT/BH-6H3
316-FLT/BHB032-6H1
316-FLT/FLT-5H3
NPB-FLT/FLT-5K3
316-FLT/FT1032-6H3
NPB-FLT/FT1032-6H3
316-FLT/FT2528-6H3
NPB-FLT/FT2528-6H3
316-FLT/FT2532-6H3
NPB-FLT/FT2532-6H3
316-FLT/FP125-9H3
316-FLT/MT1032-5H3
NPB-FLT/MT1032-5H3
316-FLT/MT2528-5H3
NPB-FLT/MT2528-5H3
316-FLT/MT2532-5H3
NPB-FLT/MT2532-5H3
316-FLT/MP062-6H3
316-FLT/MP125-7H3
NPB-FLT/MP125-7H3
PROMPT
AND
316-FLT/BHB062-6H2
NPB-FLT/BHB062-6K2
PERSONAL SERVICE
AT
316-FLT-6HB
NPB-FLT-6KB
316-FLT/BHB125-6H3
NPB-FLT/BHB125-6K3
800-255-8823
316-FLT/MP250-9H3
35
ISO 594/1,-2
Male Straight Thread
Short Lead
Times
ModuLUER straight thread fittings are manufactured to applicable
standards in 10-32, 1/4-28, and 1/4-32.
ANSI/HIMA
Male Pipe Thread (NPT)
Tough Jobs
Pipe fittings are manufactured to applicable standards in 1/16 NPT (spl
order), 1/8 NPT, and 1/4 NPT. Specials quoted on request.
24 hrs.! ▼
36
316-MT1032-4R3
316-MT2528-4R3
316-MT2532-4R3
316-MT1032-5H3
NPB-MT1032-6H3
316-MT2528-5H3
316-MT2532-5H3
316-MT1032-6H3
316-MT2528-6H3
NPB-MT2528-6H3
316-MT2532-6H3
NPB-MT2532-6H3
316-MP062-6HB
316-MP062-6H3
NPB-MP062-6HB
316-MP125-7HB
316-MP125-7H3
NPB-MP125-7HB
316-MP250-9HB
316-MP250-9H3
NPB-MP250-9HB
316-MT1032/B032-5H1
316-MT2528/B032-5H1
NPB-MT2528/B032-5H1
316-MT2532/B032-5H1
316-MP062/B032-6H1
316-MP125/B032-7H1
316-MP250/B032-9H1
316-MT1032/B062-5H2
316-MT2528/B062-5H2
NPB-MT2528/B062-5H2
316-MT2532/B062-5H2
NPB-MT2532/B062-5H2
316-MP062/B062-6H2
NPB-MP062/B062-6H2
316-MP125/B062-7H2
NPB-MP125/B062-7H2
316-MP250/B062-9H2
NPB-MP250/B062-9H2
316-MT1032/B125-5H3
NPB-MT1032/B125-5H3
316-MT2528/B125-5H3
NPB-MT2528/B125-5H3
316-MT2532/B125-5H3
NPB-MT2532/B125-5H3
316-MP062/B125-6H3
316-MP125/B125-7H3
NPB-MP125/B125-7H3
316-MP250/B125-9H3
NPB-MP250/B125-9H3
316-MT1032/B188-6H3
NPB-MT1032/B188-6H3
316-MT2528/B188-6H3
316-MT2532/B188-6H3
316-MP062/B188-6H3
316-MP125/B188-7H3
NPB-MP125/B188-7H3
316-MP250/B188-9H3
NPB-MP250/B188-9H3
316-MT1032/B250-6H3
316-MT2528/B250-6H3
NPB-MT2528/B250-6H3
316-MT2532/B250-6H3
NPB-MT2532/B250-6H3
316-MP062/B250-6H3
316-MP125/B250-7H3
316-MP250/B250-9H3
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
ISO 594/1,-2
Female Straight Thread
Short Lead
Times
ModuLUER straight thread fittings are manufactured to applicable standards in 10-32, 1/4-28, and 1/4-32.
ANSI/HIMA
Female Pipe Thread (NPT)
Tough Jobs
Pipe fittings are manufactured to applicable standards in 1/16 NPT (spl
order), 1/8 NPT, and 1/4 NPT. Specials quoted on request.
24 hrs.! ▼
316-FT1032-6H3
NPB-FT1032-6H3
316-FT2528-6H3
316-FT2532-6H3
316-FP125-9H3
316-FT1032/B032-6H1
NPB-FT1032/B032-6H1
316-FT2528/B032-6H1
NPB-FT2528/B032-6H1
316-FT2532/B032-6H1
316-FP125/B032-9H1
316-FT1032/B062-6H2
NPB-FT1032/B062-6H2
316-FT2528/B062-6H2
NPB-FT2528/B062-6H2
316-FT2532/B062-6H2
NPB-FT2532/B062-6H2
316-FP125/B062-9H2
316-FT1032/B125-6H3
NPB-FT1032/B125-6H3
316-FT2528/B125-6H3
NPB-FT2528/B125-6H3
316-FT2532/B125-6H3
316-FP125/B125-9H3
316-FT1032/B188-6H3
NPB-FT1032/B188-6H3
316-FT2528/B188-6H3
316-FT2532/B188-6H3
316-FP125/B188-9H3
316-FT1032/B250-6H3
NPB-FT1032/B250-6H3
316-FT2528/B250-6H3
NPB-FT2528/B250-6H3
316-FT2532/B250-6H3
NPB-FT2532/B250-6H3
316-FP125/B250-9H3
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
37
ISO 594/1,-2
or
ANSI/HIMA
Short Lead Times
Tough Jobs
Barb
Barb fittings are used to connect rubber and/or plastic tubing (1/32 1/4 ID) to ModuLUER assemblies. Specials quoted on request.
24 hrs.!
Actual Barb Diameter
barb O.D.=.046
barb O.D.=.120
barb O.D.=.200
barb O.D.=.240
barb O.D.=.280
316-B032-2R1
316-B062-4R2
316-B125-4R3
316-B188-4R3
316-B250-4R3
316-B032/B032-5H1
www.microgroup.com
316-B032/B062-6H1
NPB-B032/B062-6K1
316-B062/B062-6H2
316-B032/B125-6H1
316-B062/B125-6H2
316-B125/B125-6H3
316-B032/B188-6H1
316-B062/B188-6H2
316-B125/B188-6H3
316-B188-B188-6H3
316-B032/B250-6H1
316-B062/B250-6H2
316-B125/B250-6H3
316-B188-B250-6H3
316-B250/B250-6H3
NPB-250/B250-6K3
Sinkers
Sinkers are used to terminate plastic and/or rubber tubing when the
application requires the end to be submerged.
24 hrs.!
38
PROMPT
AND
PERSONAL SERVICE
AT
316-SK50/B032-1
316-SK100/B125-3
316-SK200/B188-3
NPB-SK200/B188-3
316-SK200/B250-3
NPB-SK200/B250-3
800-255-8823
ISO 594/1,-2
or
ANSI/HIMA
Short Lead Times
Tough Jobs
Elbows and Tees
New 90° elbow and tee line of fittings from MicroGroup are ideal for a
wide variety of applications where space is limited. Stock parts manufactured from 316 stainless steel with welded construction, however, other
custom materials available upon request including; brass, titanium, nylon
and much more. See quote request form on page 14 for stocked components sizing guide.
ISO 594/1,-2
or
ANSI/HIMA
Features:
Applications:
•
•
•
•
•
•
•
•
•
Short lead time
Components available from stock
Durable 316 stainless steel construction
Compatible with a wide assortment of
terminations
Medical
Laboratory
Dental
General industrial
Prototype applications
Short Lead Times
Tough Jobs
Luer Taper Gauges
A full line of Luer Standards Documentation and Taper Gauges are available for either the ANSI/HIMA MD70.
1-1983 or the newer ISO 594/1,2 1986-1998 Standards. All Gauges are hardened and ground. Each gauge is
available with written certification at an additional charge. When inquiring, please specify the type of material from
which the Luers to be checked are made, since differences occur between rigid and non-rigid materials.
ISO 594/1,2
Item #
Description
$ ea.
ISO 594/1-86 E Paragraph 5.1 Gage Testing
LTG-3A
Female stepped cone ring gage for testing dimensional characteristics and taper size of rigid male luer fittings.
LTG-3B
Female stepped cone ring gage for testing dimensional characteristics and taper size of semi-rigid male luer fittings.
LTG-3C
Male stepped cone plug gage for testing dimensional characteristics and taper size of female luer fittings in all materials.
ISO 594/1-86 E Paragraph 5.2 Liquid Leakage
LTG-4
Female conical fitting for leak testing male luer fittings. Requires application of water at 300 kpa, not for use with lock nut in place.
LTG-5M
Male conical fitting for leak testing female luer fittings. Requires application of water at 300 kpa.
ISO 594/2-98 E Paragraph 5.2 Leak Testing
LTG-5F
Female conical fitting with lugs for leak testing male luer fittings with lock nut in place. Requires application of water at 300 kpa.
LTG-7
Male conical fitting with lock nut in place for leak testing female luer fittings with lugs. Requires application of water at 300 kpa.
ISO 594/2-98 E Paragraph 5.4 Separation Force
LTG-6
Female conical fitting with lugs for separation force testing male luer fittings with lock nut in place.
LTG-8
Male conical fitting with lock nut for separation force testing female luer fittings with lugs in place.
Call
for
pricing
ANSI/HIMA
Item #
Description
$ ea.
ANSI/HIMA MD70.1-83 Paragraph 4.2 Gage Testing
LTG-4-AH
Female stepped cone ring gage for testing dimensional characteristics and taper size of rigid and nonrigid male luer fittings.
LTG-5-AH
Male stepped cone plug gage for testing dimensional characteristics and taper size of rigid and nonrigid female luer fittings.
Call
for
pricing
Custom Orders Welcome!
If You Don’t See It Listed… Call Us,
and We’ll Accommodate Your Request.
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
39
Miniature Spindle and Trumpet Valves
Spindle Valves
Trumpet Valves
A breakthrough in miniature valve construction, MicroGroup’s Spindle
Valve is the preferred choice for your medical, lab and analytical device
designs. Constructed of 316 stainless steel, the Spindle Valve is sturdier
and more reliable than plastic or nickle plated brass valves.
MicroGroup’s new Trumpet Valve was developed for a wide variety of
applications. Featuring stainless steel construction, the Trumpet Valve
can be custom made in less than 5 days. Consult your MicroGroup
representative for a complete listing of stock fittings.
What’s more, these replaceable viton o-rings and seal, combined with a
stainless steel body help ensure consistent performance and long life.
If custom materials are your preference, this innovative new product can
be produced in titanium and other hard-to-find materials.
Stock - 24 hrs.
Stock - 24 hrs.
Detailed
schematic
drawing of
Spindle
Valve
Detailed
schematic
drawing of
Trumpet
Valve
Stocked with:
• MaleLUER-Lock (MLL) and FemaleLUER (FL)
• 10-32FT x 10-32FT
• 25-28MT x 25-28MT
Stocked with:
• MaleLUER-Lock (MLL) and FemaleLUER (FL)
Features:
Features:
•
•
•
•
•
•
•
•
•
•
•
Up to 120 PSI liquid and 75 PSI air with proper fittings
Patent pending design that requires no lubrication
.125" straight-thru bore
Vary bore I.D. with fittings
Replaceable seal and o-rings available in silicone and other custom
materials upon request
• Body components available in titanium and other custom materials
upon request
Durable 316 stainless steel body construction
Viton o-rings, other o-ring materials available upon request
Up to 120 PSI liquid and gas with proper fittings
.059 orifice
Lubricant used to minimize friction
Wide range of fittings for right and left terminations
* Please call to discuss in-stock designs and applications
40
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
3-Way Miniature Plug Valve
Short Lead Times!
The New 3-Way Miniature Tapered Plug Valve from MicroGroup serves a wide variety of high
and low pressure applications. Featuring stainless steel and Teflon construction, this valve
utilizes the same ModuLUER® connections as the Spindle Valves, enhancing the flexibility of
its use.
In-stock as pictured.
Call for custom requirements.
Other features include low torque operation, straight-thru bore and a variety of fittings to
select from. What’s more, the 3-Way Valve is fully autoclavable and easily disassembles for
cleaning. Custom Miniature Plug Valves from MicroGroup are manufactured in accordance
with our high quality manufacturing standards.
2
Features:
•
•
•
•
Durable 316 stainless steel and glass filled Teflon liner
Up to 90 psi liquid and air with proper fittings
Straight-thru bore (low loss .071)
Wide range of fittings for right, left and side terminations
1
3
316-FL/MLL/FL-VP3 071
Detailed schematic
drawing of 3-Way
Plug Valve
Directional Flow Chart
(1) Stock
(2) Stock
(6) Off
(5) Off
PROMPT
(3) Stock
AND
PERSONAL SERVICE
AT
(4) Custom 3-Way
Call for lead time & price
(7) Off
800-255-8823
41
ISO 594/1,-2
or
ANSI/HIMA
Compression Fittings (Tuohy Borst)
Stock - 24 hrs.
AND
Features:
Applications:
• 24 hour delivery – available from stock
• Resists extreme temperature variations:
100°F to 350°F
• FDA approved materials
• Easy to disconnect and reuse
• Compatible with a wide variety of
materials and tube diameters
• Up to 90 PSI liquid and air maximum
•
•
•
•
•
Surgical
Medical
Dental
Laboratory
and more!
ITEM
DESCRIPTION
PART NUMBER
MATERIAL
QTY.
1
MAIN BODY
316-1032-TUOHY-1 ITEM 1
316 (S/S)
1
2
BUSHING
316-1032-TUOHY-1 ITEM 2
316 (S/S)
1
3
SEAL
316-1032-TUOHY-1 ITEM 3
SILICONE
1
4
CAP NUT
316-1032-TUOHY-1 ITEM 4
316 (S/S)
1
Description
Fractional Sizes
French Sizes
316-1032-TUOHY-1
Tuohy Borst to Male 1032 Thread
1/64" - 5/64"
.013" - .079"
1fr - 6fr
316-1032-TUOHY-2
1/16" - 3/32"
.062" - .093"
5fr - 7fr
316-1032-TUOHY-3
3/32" - 1/8"
.093" - .125"
7fr - 9fr
Tuohy Borst to Female Luer
1/64" - 5/64"
.013" - .079"
1fr - 6fr
Tuohy Borst to Male Luer Lock
1/64" - 5/64"
.013" - .079"
1fr - 6fr
316-MLL-TUOHY-5
PROMPT
MicroGroup is pleased to introduce to market its new line of compression
fittings. Designed for quick and easy connection to a wide variety of
materials and tube diameters, these handy components eliminate the
need for time consuming and costly secondary operations including;
welding, brazing, soldering and more. Stocked body parts constructed
from type 316 stainless steel with reusable and replaceable silicone
seals. Other custom materials available upon request.
Item #
316-FL-TUOHY-4
42
Short Lead Times!
PERSONAL SERVICE
AT
800-255-8823
$ ea.
Call or
access
web
for
pricing
Quotation Express Form
STOCK COMPONENT
BODY
PLUG VALVE
❑
Male LUER (ML)
TERMINATION 1 TERMINATION 2 TERMINATION 3
*
❑
❑
❑
*
❑
❑
❑
*
❑
❑
❑
*
❑
❑
❑
*
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
(Stock)
1
Male LUER-Lock (MLL)
2
3
.071" Dia. Thru
Select
3 terminations
TRUMPET
Rotating Male LUER-Lock
(MLRL)
❑
(Stock)
Female LUER (FL)
2
1
Female LUER-Thread (FLT)
.059" Dia. Thru
Select
2 terminations
SPINDLE
❑
(Stock)
*
Male Thread (MT)
MT1032
MT2528
MT2532
*
Female Thread (FT)
1
FT1032
FT2528
FT2532
2
.125" Dia. Thru
Select
2 terminations
❑
ELBOW
1
Barb (B)
For Tube I.D.
1/32" (B032)
1/16" (B062)
1/8" (B125)
3/16" (B188)
1/4" (B250)
Actual Barb O.D.
.046
.120
.200
.240
.280
Actual Barb I.D.
.018/.020
.060/.062
.093/.094
.093/.094
.093/.094
2
.125" Dia. Thru
Select
2 terminations
1/8" NPT (FP125)
❑
TEE
1
*
Female Pipe Thread (FP)
2
Male Pipe Thread (MP)
1/16" NPT (MP062)
1/8" NPT (MP125)
1/4" NPT (MP250)
3
.125" Dia. Thru
Select
3 terminations
PROMPT
*I.D. .093/.094
AND
PERSONAL SERVICE
AT
800-255-8823
43
Specialty Small
Tools
Most orders shipped
within 24 HOURS!
Fast Turnaround!
< SAWS
< BLADES
< BENDERS
< LUBRICANTS
www.microgroup.com
• RFQ’s
• Ordering
• Product Updates
• And More!
MINITUL® Model-500 Small Diameter Cut-Off Saw
90 Day
Warranty
es
lad
e B hase!
e
r
2 F Purc 0A)
3
h
wit 080-0
(5-
The easy-to-use MINITUL® Model-500 Cut-Off Saw is a portable tool for
small diameter cutting requirements. This solidly built saw comes assembled and is ready to perform efficiently on a variety of materials from
aluminum to stainless steel. 90 Day Warranty
Features
Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cuts lengths from 1/16"
Cuts with Minimal Burr
Mitres to 30°
Easy Blade Changes
Portable 115v AC
Cuts to 1/2" Cross Section
Double-Acting Vise
Cut to +/- .005" Tol.
Positive Drive Belt
Economical
2 Free BLADES (5-080-030A)
1/2" Arbor
Free Stick of Boelube
4" – 5" Diameter Blades
Aluminum
Brass
Copper
Glass
Plastic
Stainless Steel
Most Materials
Composites
Braided Cables
Coax
Armored Cable
Item #
Description
$ ea.
Mod500
Model 500 Miniature Cut Off Saw
Call or access
web for pricing
Red Goo #2 / Boelube® Stick Lubricant
Red Goo #2 is an incredible oil lubricant developed when MicroGroup was researching new tube
drawing compounds. Red Goo #2 multiplies tool life by significantly reducing heat on all metals.
Red Goo #2 as the name implies is a heavy, sticky lubricant usually applied directly to a tool.
Applications
• Spinning
• Machining
• Coining
Item #
RED
RED
RED
RED
RED
-
• Punching
• Grinding
• Drawing
Please call and let us
fax the updated Material
Safety Data Sheet for
Red Goo #2 to you.
Description
1/2
4
32
64
128
$ ea.
Call or
access
web
for
pricing
1/2 oz.
4 oz.
1 qt.
1/2 gal.
1 gal.
Boelube® Stick Lubricant
GRINDING:
Reduces burning by its unique ability to load the grinding wheel as a wax and
changing to a liquid at 400°F, purging the wheel and cooling the work. Excellent for
sharpening tools.
MACHINING:
Significantly reduces heat on all metals, increasing tool life and decreasing burr on
small parts in particular.
APPLICATION: Wax stick is used to directly press the tool while turning.
70200-13
Water
solu
Non-t ble &
oxic
(Boelube® is a Reg. TM Boeing Co.)
PROMPT
AND
PERSONAL SERVICE
AT
800-255-8823
45
Model-500 Saw & Other Abrasive Cut-Off Blades
MicroGroup sells a wide variety of saw blades for
most applications and requirements. The following
is a comprehensive listing of our stocked blades.
However, if you don't see what you need listed,
please call and we'll find it.
Steel
●
●
4
120
016
A
1/2
●
●
●
●
5-120-015A
Non-Reinforced Rubber Abrasive Blade. Recommended for cutting metals when
#5-80-030 causes motor to labor excessively or when burrs are unacceptable.
The blade is somewhat fragile and used for very light wall to 1/2" diameter.
5
120
015
A
1/2
4-90-025A
Non-Reinforced Rubber Abrasive Blade. Rugged blade cuts metals,
reduces motor load. Best blade if used only occasionally), due to rugged
construction, to be used on most stock over 3/8" dia.
4
90
025
A
1/2
4-060-030AR
Heavy Duty Reinforced Resin Abrasive Blade Can be used for cutting
Titanium
4
60
030
A
1/2
5-060-030AR
5
60
030
A
1/2
Heavy Duty Non-Reinforced Rubber Abrasive Blade. Similar to 4-90-025A
The best all purpose blade. For heavy cuts.
5-080-030A-RED
5
80
030
A
1/2
●
●
●❍ ●❍
5
80
030
A
1/2
●
●
●❍ ●❍
6-080-030A
6
80
030
A
1/2;5/8
●
●
●❍ ●❍
General Purpose Saw Blades
4-240-013A
4-120-016A
5-080-030A
●❍ ●❍
●
●
●
●
●
●
●
●
7
80
030
A
1/2;5/8
●
●
●❍ ●❍
5-080-060A
For extra-heavy cuts.
5
80
060
A
1/2
●
●
●
5-046-060AR
Heavy Duty Reinforced Resin Abrasive Blade. Similar to 4-90-025A
For heavy cuts.
5
46
060
A
1/2
●
●
4-SPL-009S
Non-Reinforced Rubber/Silicon Carbide Blade. Silicon abrasive allows
this blade to cut through very small diameter hypodermic tubing, drill
blanks and glass; However, this blade requires extreme care in handling
to prevent breakage since it is only .009" thick. Use with a Boelube®.
4
–
009
S
1/2
❍
4-120-025S
Non-Reinforced Rubber/Silicon Carbide Heavy Duty Blade for cutting
glass, ceramics, and thermocouple cable. Should be used with Boelube®.
4
120
025
S
1/2
❍
5-150-015S
Non-Reinforced Rubber/Silicon Carbide Heavy Duty Blade for cutting
glass, ceramics, and thermocouple cable. Should be used with Boelube®.
5
150
015
S
1/2
❍
4-028-024HS
High-Speed Steel Blade.Used for plastics and wood without lubricant.
Excellent for cutting copper, aluminum and brass. Use with a Boelube®.
except on brass (cut dry).
4
28
024
HS 1/2
❍
❍
●
❍
❍
5
24
028
HS 1/2
❍
❍
●
❍
❍
Hollow-Ground High-Speed Steel Blade. Used on larger sections of soft
metals and wood due to hollow ground side which prevents jamming in
cut. Excellent for cutting copper, aluminum and brass. Should be used
with Boelube®, except on brass (cut dry).
4
10
030
HG 1/2
❍
❍
●
❍
●
●
5
10
030
HG 1/2
❍
❍
●
❍
●
●
7-080-030A
5-024-028HS
4-010-030HG
5-010-030HG
We also carry other size blades up to 12" diameter, call for availability.
46
$ ea
Steel Stainless
●
Plastics > 1/8"
●
Plastics < 1/8"
1/2
Glass
Brass > 1/4"
A
Copper > 1/8"
Brass < 1/4"
013
Copper < 1/8"
Type
240
Alum > 1/4"
Thickness
4
Alum < 1/4"
Grit /# Teeth
Non-Reinforced Rubber Abrasive Blade with Special Mixed Abrasive
Sizes for minimum burr. Most commonly used for cutting any steels up to
1/2" diameter.
Item #
Arbor Size
Dia.
Custom Blades
Available
Wood
A = Aluminum Oxide
S = Silicon Carbide
HS = High Speed Stee
HG = Hollow Ground High Speed Steel
● = Dry Cut
❍ = Use Boelube
PROMPT
AND
PERSONAL SERVICE
AT
Call or
access
web
for
pricing
●
* Prices subject to change without notice.
800-255-8823
DUO-MITE Industrial Bending Kit
Hand Bender
DUO-MITE Kits
#55000
Item #
Description
50000
Duo-Mite® Hand Bender Kit
Gauge and Pin
3/16" Diameter Pin
1/4" Diameter Pin
1/2" Diameter Pin
1" Diameter Circle
Sharp Angle Die
Form Pin Follower
54000
Jewelry Kit
Pivot Lock Handle
Delrin Follower Pin
Bend Stop Pin
Allen Wrench
Narrow Jaw Faces (2)
Jaw Face Pad
3/16" Diameter Pin
1/4" Diameter Pin
Ring Shank Dies (4)
Sharp Angle Die
Steel Dies (2)
Delrin Dies (2)
Gauge
1/2" Pin (2)
Form-Matic Handle
Tapered Jaw Face
#54501
55000
Best Value
$ ea
Call or
access
web
for
pricing
Same as #50000 Except Includes Vari-Vise and
Pivot Lock For Production Jobs and Small Parts
DUO-MITE Accessories
Circle Pins
Item #
Description
51002
51003
51004
51006
51352
1/8" Diameter Pin
3/16" Diameter Pin
1/4" Diameter Pin
3/8" Diameter Pin
1/2" Diameter Pin
Handles
$ ea
Item #
Description
Call or
access
web
for
pricing
53100
53115
54500
54501
Form-Matic Handle
Delrin Follower
YR Handle
YRT Handle - Optional
Circle Dies (1/2" ID)
Item #
Description
51012
51014
51016
51018
51019
51020
51022
51025
51028
51030
3/4" Diameter Circle
7/8" Diameter Circle
1" Diameter Circle
1 1/4" Diameter Circle (Steel)
1 1/4" Diameter Circle (Delrin)
2" Diameter Circle
2 1/4" Diameter Circle
2 1/2" Diameter Circle (Steel)
2 3/4" Diameter Circle
3" Diameter Circle
Miscellaneous
$ ea
Item #
Description
Call or
access
web
for
pricing
52000
53008
53110
53120
53125
60100
Edgebending Kit
Bench Bracket
Small Bracelet Die (Child’s) 5"-5 1/2"
Medium Bracelet Die (Lady’s) 5 3/4"
Large Bracelet Die (Men’s) 6"-6 1/2"
Tube Bending with YRT Tooling,
1/16, 1/8, 3/16, 1/4" tool set consisting of
4 groove jaw and follower roll. 3/4" centerline radius.
Tube Bending with YRT Tooling,
3/32, 5/16, 3/8 tool set consisting of
3 groove jaw and follower roll - 3/4" centerline radius.
60200
Description
51040
51050
51060
51070
51080
4"
5"
6"
7"
8"
Diameter
Diameter
Diameter
Diameter
Diameter
Standard on 54000 & 55000
Replaceable Jaw Feature
$ ea
Call or
access
web
for
pricing
Circle
Circle
Circle
Circle
Circle
$ ea
Call or
access
web
for
pricing
VARI-VISE #51100
Circle Loops (for hand forming)
Item #
$ ea
Call or
access
web
for
pricing
PIVOT-LOCK #53500
Close Follower (for best results use with #53100 handle)
Item #
Description
51200
Close Follower (for bending small wire forms)
PROMPT
AND
$ ea
Standard on 54000 & 55000
Quick Lock for Production Quantity Bends
Call or access web for pricing
PERSONAL SERVICE
AT
800-255-8823
47
MicroGroup®, Inc.
7 Industrial Park Road
Medway, MA 02053
THREE EASY WAYS TO ORDER:
Phone
1- 800 - 255 - 8823
1- 508 - 533 - 4925
Fax
1- 508 - 533 - 5691
Online
www.microgroup.com
PRSRT STD
U.S. Postage
PAID
Permit No. 200
Woodstock, IL

the MicroGroup® Advantage

Transcription

Similar documents

ZIMA 126-CS-Fabrication.indd

For more information: www.grandcasinobrewfest.com

ISE Spec Sheet-Contractor 333 - InSinkErator

bis tristar - LUCKINSlive

Chicago Products

PG8AC, PGAC - Drinking Fountains

medium wall tubing (mwtm)

stainless steel judges

to now. - Kugel Komponents

Sanitation Through Separation - Cisco