Intelligent Heater Catalog
Transcription
Intelligent Heater Catalog
P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 1 INTELLIGENT HEATER, LLC. A DEGREE ABOVE THE REST FOR SIX DECADES Intelligent Heater, LLC, the new parent company of CLEPCO, is proud to introduce the “Next Generation of Immersion Heaters” by offering a wide variety of Innovative Heater products in your choice of material: Quartz, Titanium, Stainless Steel and Fluoropolymer. For more than six decades, CLEPCO has meant innovation and leadership in the design and manufacture of quality immersion heaters and controls. Since our inception in 1947 to the first patent issued to CLEPCO in 1954, to our SMART HEATER®, SEESAW™ switch, and QUICKPLUG™ systems, CLEPCO has introduced pioneering products that have set the standard for quality and safety. Our goal as leaders in Electric Process Heating is to provide our customers peace of mind that can only be achieved through products specifically designed for the Industry In a fast changing world, industries demand flexible designs, innovative thoughts and reliable products. Intelligent Heater, LLC offers all of these coupled with over 60 years experience manufacturing quality heaters. Products offered: • Custom application heaters tailored to meet exacting specifications • Tubular Heaters with advanced thermal protection • Custom Heat systems to specification • Screw Plug and Flange Heaters • Fluoropolymer (PTFE) Heaters • Thermal Protection Systems • Temperature Control Systems • SEESAW™ Float Switch • Immersion Heaters • Metal Coil Heaters • QUICKPLUG™ Heaters • Quartz Heaters • Metal heaters We welcome all custom heating system requirements whether it be a simple immersion heater or a series of heaters and computer compatible control system necessary to function as a complete factory heating system. Rest assured, we will provide engineering support every step of the way. HELPFUL TIPS 1) Keep your heaters clean for longevity and prime performance. FLUOROPOLYMER (PTFE) and QUARTZ HEATERS use plastic scrub brush and rinse with water only. METAL HEATERS use an abrasive scouring pad, metal wire brush, or scraper. Do not hit your heater this will cause damage. Allowing scale to build up on your heater will cause heater failure. 2) Allow ample time for your heater to cool down before removing it from your liquid solution. Removing the heater too soon will damage your fuse. 3) Always keep your liquid solution two inches above your heater’s hot zone. Allowing your solution to drop below this point will damage your fuse. 2 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs VOLTAGES AVAILABLE (MOST HEATERS AND CONTROLS) Voltages are designated in Intelligent Heater model numbers as follows: 120 volt = 1 220 volt = 0 208 volt = 8 220 volt = 9 240 volt = 2 380 volt = 3 400 volt = 7 415 volt = 5 480 volt = 4 600 volt = 6 Specify Single or Three Phase when ordering. Consult factory for other voltages. Example for SINGLE BAYONET HEATERS: W-3222-A = Mild Steel - 3KW 240V 22” Overall Length - A Fuse WS-4429-AH = 304SS - 4KW 480V 29” Overall Length - AH Fuse TY-10359-E = TITANIUM - 10KW 380V 59” Overall Length - E Fuse THERMAL PROTECTION SYSTEMS METAL BAYONET & L-STYLE HEATERS Option A Thermal Fuse: Replaceable One Time Thermal Fuse for temperatures under 190°F. CHANGING TO CUSTOM LENGTH: Fuse: Has Two Red Lead Wires. Change the Last Two Numbers (WS-3222-A) to the desired overall heater length. Standard: On all Metal, Quartz Bayonet and L-Type heaters. NOTE: Only the cold zone portion of the heater can change in length. Example: Heater Model: WS-2217-A Order Instructions: Specify -A After Your Model Number. Example: Heater Modals WS-3222-A is 22” in length. WS-3244-A is 44” in length. WS-3220-A is 20” in length. Option AH Thermal Fuse: Replaceable One Time Thermal Fuse for Temperatures under 329°F. No additional charge for shorter than standard lengths. Fuse: Has Two White Lead Wires. Pricing For Single Tube Mild Steel and Stainless Steel: Add: $3 Per each additional inch to the base price of Mild Steel, 304 Stainless Steel and 316L Stainless Steel. Example: Heater Model WS-2117-AH Order Instructions: Specify -AH After Your Model Number. Option E Resettable Thermal Fuse: Use with controls that have manual reset function. Under 200°F. Fuse: Has Two Blue Lead Wires. Example: Heater Model WS-2117-E Order Instructions: Specify -E After Your Model Number. SEE PAGE 18 FOR PRICING. PRICING INFO FOR NON-STANDARD PRODUCTS Consult factory on length limitations. Pricing For Single Tube Titanium Heaters: Add: $6 Per each additional inch to the base price of Titanium. Pricing For Triple Tube Bayonet Heaters: Add: $9 Per each additional inch to the base price of Mild Steel, 304 Stainless Steel And 316L Stainless Steel. Add: $18 Per each additional inch to base price of Titanium Heaters up to 12” over standard length. Over 12” Triple Bayonet will use deep tank style heaters. Consult factory for pricing on deep tank specific models. SLUDGE FEET: Optional ”2 – 8” Sludge Feet for L-Type Heaters are Available. Add SL2-SL to the model number. Standard: 1.25” Sludge Feet Height Example: Heater Model WSL-2217-A-R25-SL4 Pricing: $35 up to 8 inches. L-Style Heaters Riser Lengths: L-Style heaters are recommended if Liquid Level Fluctuates. To order different Riser Lengths. Add: the letter “R” followed by your total Riser Height to the End of the selected Heater Model. Example: Heater Model WSL4224-A-R30 has a 30” riser. GOOSENECK RISER: Optional Gooseneck Riser Available. Top Portion of Riser and Heater Head is Welded at a 90° angle. Add the letters GN6 after the selected L- Type heater model. Pricing: Add $3 Per each additional Inch of the Riser Height for Mild Steel, 304 Stainless Steel and 316L Stainless Steel. Pricing: Add $6 Per each additional Inch of the Riser Height for Titanium. Standard: 6” Length Conduit: Example: Heater Model WSL2217-A-R25-GN6 X=BX Conduit: Gray Corrosion resistant, PVC flexible tubing that protects the wires of the heater. Pricing: $25Steel - $40 Titanium Charge Up To 6” $35 / $50 over 6” PLASTISOL DIPPED HEATER HEADS: Plastisol helps Prevent Moisture from Entering Heater Head. Plastisol is a Green Covering Over the heater head. Ordering Instructions: Add the letter “R” to the beginning of the model number of the heater. Standard: 36 inches. is standard on all Inline, Bayonet, L-Style, and Quartz Heaters. Ordering Instructions: Additional BX Conduit Length is available on all Clepco Heater Models. Add the Letter X and the total amount of conduit desired in Inches. Example: WS-2117-A-X72 Example: Heater Model RWS-2217-A Pricing: Single Bayonet $20, Single L-type $40. Pricing: $4 Per Foot over the standard 36 inches. METAL HEATER HEAD: Crating Charges will apply on shipments that require crating. Optional Heavy Duty Welded Metal Heater Head. Add the letter ‘’M” after the heater model number. Single tube may be square or round. Example: Heater Model WS-2217-A-M. Pricing: $35-$75 Consult Factory. Crating Charges: Pricing: Single Bayonet & L-Type: Stainless Steel $25, Titanium $35 Pricing: Triple Bayonet: Stainless Steel $60, Titanium $70 CUSTOM PRODUCTS: Custom Engineered Products Subject to Additional Charges. Pricing: Minimum Invoice $25 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 3 Type of Heaters Solutions Type of Heaters Acetic TEFLON* or Quartz Chromium (Fluoride) TEFLON* Acid Sulfate TEFLON* or Quartz Clear Chromate TEFLON* or Quartz Alkaline Cleaners (Electrified) 304 Stainless Steel Cobalt Nickel TEFLON*, Quartz or Titanium Alkaline Soaking Cleaners 304 Stainless Steel Cobalt Plating 304 Stainless Steel Alodine 316 Stainless Steel Copper Acid TEFLON* or Quartz Aluminum Anodizing TEFLON* or Quartz Copper Bright Acid TEFLON* or Quartz Aluminum Bright Dip TEFLON* or Quartz Copper Cyanide 304 Stainless Steel Aluminum Cleaners 304 Stainless Steel Copper Fluoborate TEFLON* Aluminum Chloride TEFLON* or Quartz Copper Pyrophosphate 304 Stainless Steel Aluminum Sulfate 304 Stainless Steel Copper Strike 304 Stainless Steel Ammonia Persulfate TEFLON* or Quartz Copper Sulfate TEFLON* or Quartz Ammonium Bi Fluoride TEFLON* Cyanide 316 Stainless Steel Anodizing TEFLON* or Quartz DeionizedWater 316 StainlessS teel Arsenic 304 Stainless Steel Deoxidizer (Etching) Quartz Black Nickel TEFLON*, or Quartz Deoxidizer (Non-Chromated) 316 Stainless Steel Black Oxide (Hi-Temp) Mild Steel; 304 Stainless Steel# Dichromic Seal Steel Black Oxide( Low-Temp) Titanium DyeSolutions 304 Stainless Steel Bonderizing 316 Stainless Steel Ebonal Copper Titanium Brass Cyanide 304 Stainless Steel Electroless Copper TEFLON* Bright Nickel TEFLON*, Quartz or Titanium Electroless Nickel 316 SS; TEFLON* or Titanium Bright Copper-Cyanide 304 Stainless Steel Electroless Tin (Acid) TEFLON* or Quartz Bronze 304 Stainless Steel Electroless Tin (Alkaline) 316 Stainless Steel Brown Oxide Titanium Electro Cleaner 304 StainlessS teel Cadmium Black TEFLON* or Quartz Electro Polishing TEFLON* or Quartz Cadmium (Alkaline) 304 Stainless Steel Ethylene Glycol Steel Cadmium Fluoborate TEFLON* Ferric Sulfate 304 StainlessSteel Caustic Etch Steel# Ferric Chloride TEFLON* Quartz or Titanium Caustics Steel Fluoborate TEFLON* Caustics (highly concentrated 20% & over) Steel# Immersion Gold 304 Stainless Steel Chloride TEFLON* or Quartz Gold Acid TEFLON*, Quartz or Titanium Chromic Anodizing TEFLON* or Quartz Gold Cyanide 304 Stainless Steel Chromium (No Fluorides) TEFLON*, Quartz or Titanium Grey Nickel TEFLON*, Quartz or Titanium Solutions 4 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Solutions Type of Heaters Solutions Type of Heaters Hot Seal Dichromate 316 Stainless Steel Sodium Dichromate (Hot Seal) 316 Stainless Steel Hydrogen Peroxide TEFLON* or Quartz Sodium Hydroxide Steel Hydrochloric Acid TEFLON* or Quartz Sodium Persulfate TEFLON* or Quartz Hydrofluoric Acid TEFLON* Stannate Steel Iron Fluoborate TEFLON* Stanostar TEFLON* or Quartz Iron Phosphate 316 Stainless Steel Sulfamate Nickel TEFLON*, Quartz or Titanium Lean Acetate 304 Stainless Steel Sulfuric Acid TEFLON* or Quartz Lime Saturated Water (Alkaline) 316 Stainless Steel Sulphamic Acid TEFLON* or Quartz Magnesium Hydroxide 304 Stainless Steel Tannic Acid Titanium Manganese Phosphate 316 Stainless Steel Tin Nickel TEFLON* Muriatic Acid TEFLON* or Quartz Tin Plating (Acid) (Stanus/Sulphate) TEFLON* or Quartz Nickel (Plating Solution) (Watts) TEFLON*, Quartz or Titanium Tin Plating (Alkaline) 304 Stainless Steel Nickel Acetate Seat 316 Stainless Steel Trichlorethylene 316 Stainless Steel Nickel Chloride Titanium Trioxide (Pickle) TEFLON* or Quartz Nitric Acid Quartz Water 316 or 304 Stainless Steel Oil Steel Wood’s Nickel Strike TEFLON* or Quartz Paint Stripper (Alkaline) 304 Stainless Steel Yellow Dichromate TEFLON* or Quartz Perchlorethylene 316 Stainless Steel ZincAcid TEFLON* or Titanium Phosphoric Acid (No Fluoride) TEFLON* or Quartz Phosphate Cleaner 304 Stainless Steel Phosphate 316 Stainless Steel Potassium Acid Sulfate TEFLON* or Quartz Potassium Cyanide 304 Stainless Steel Potassium Hydroxide 304 Stainless Steel Potassium Hydrochloric TEFLON* or Quartz Potassium Permanganate TEFLON* or Titanium Rhodium TEFLON* or Quartz Rochelle Salt Cyanide 304 Stainless Steel Sea Water Titanium Silver Bromide 316 Stainless Steel Silver Cyanide 304 Stainless Steel Silver Nitrate 316 Stainless Steel This information is provided as a courtesy selection guide only. Due to the complexities of solutions and applications, Intelligent Heater LLC cannot assume responsibility for any advice furnished. We do not guarantee heaters against premature failuredue to corrosive action caused by unusualc onditions. It is solely the customers’ obligation to contact his chemical supplier for heater sheath compatibility. NEVER USE ELECTRIC IMMERSION HEATERS TO HEAT FLAMMABLE SOLUTIONS! # Should Be Derated Heater Registered trademark for fluoropolymer resins, films and fibers made by DuPont. P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 5 Control Amerpage Selector Control Sizing - Heating Load Amperage THREE PHASE BALANCE SINGLE PHASE Heater Wattage 120V 208V 240V 480V 208V 240V 480V 600V 500 4.2 2.4 2.1 1.1 1.4 1.2 0.6 0.5 1000 8.4 4.8 4.2 2.1 2.8 2.5 1.2 1.0 2000 1 6.7 9.7 8.4 4.2 5.6 4.9 2.5 1.9 3000 25.0 14.5 12.5 6.3 8.4 7.3 3.7 2.9 4000 33.4 1 9.3 1 6.7 8.4 11.2 9.7 4.9 3.9 5000 41.7 24.0 20.8 10.4 14.0 12.1 6.0 4.8 6000 50.0 28.9 25.0 12.5 1 6.7 14.5 7.3 5.8 7000 58.3 33.7 29.2 14.6 1 9.5 1 6.9 8.4 6.7 8000 66.7 38.5 33.4 1 6.7 22.3 1 9.3 9.7 7.7 9000 75.0 43.3 37.5 1 8.8 25.1 21.7 10.9 8.7 10000 83.3 4 8.1 41.7 20.9 27.8 24.1 12.0 9.6 12000 100.0 57.7 50.0 25.0 33.4 29.0 14.5 11.6 1 5000 125.0 72.1 62.5 31.2 41.7 36.1 1 8.1 14.5 1 8000 1 50.0 86.6 75.0 37.5 50.1 43.4 21.7 17.3 21000 175.0 101.0 87.5 43.8 58.3 50.6 25.3 20.5 24000 200.0 11 5.4 100.0 50.0 66.7 57.8 28.9 23.0 27000 225.0 129.9 112.5 56.3 75.1 65.1 32.6 26.0 30000 250.0 144.2 125.0 62.5 83.3 72.3 36.1 28.9 36000 300.0 173.1 1 50.0 75.0 100.1 86.8 43.3 34.7 Controls are determined by finding the amperage per line and multiplying by 1.25 factor. How to calculate control amerpage • For single phase or two wire power supplies to heaters. Example: Formula: Total capacity (watts) = AMP rating per pole 4000 watts = 16.67 Amps 240 volts Line voltage • For three phase or three wire power supplied (Delta or Wye connections) to heaters using a three-pole contactor. Example: Formula: Total capacity (watts) Line voltage x 1.73 6 = AMP rating per pole 4000 watts 240 volts x 1.73 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs = 16.67 Amps Features • All Heaters come standard with the Option A Fuse. • Custom riser available. Add $3 Per Inch. • Custom lengths and voltages available. See page 1 for details. • Extended guard riser available. Add $1 Per Inch. Fluoropolymer (PTFE) Low Profile Bayonet Thermal Protector Model No. Watts Volts Overall Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) DIA. TF.5114 TF.5214 500 120 240 14 / 356 8 / 203 6 / 152 5 / 127 6/3 1000 120 240 14 / 356 7 / 178 7 / 178 6 / 153 7/4 TF2117 TF2217 TF2417 2000 120 240 480 17 / 432 8 / 203 9 / 228 8 / 203 8/4 TF3223 TF3423 3000 240 480 23 / 584 13 / 330 10 / 254 9 / 239 13 / 6 TF4228 TF4229 4000 240 480 29 / 737 17 / 432 12 / 305 11 / 279 15 / 7 TF5235 TF5435 5000 240 480 35 / 889 22 / 559 13 / 330 12 / 305 18 / 8 TF6240 TF6440 6000 240 480 40 / 1016 26 / 660 14 / 355 13 / 330 22 / 10 TF1114 TF1214 Weight (lb/kg) Cold Zone Overall Length Hot Zone Features • All Heaters come standard with the Option A Fuse. • Custom riser available. Add $3 Per Inch. • Custom lengths and voltages available. See page 1 for details. • Extended guard riser available. Add $1 Per Inch. Fluoropolymer (PTFE) Low Profile L-Style Volts Thermal Protector Riser Length Cold Zone (in/mm) Hot Zone (in/mm) DIA. Weight (lb/kg) Model No. Watts TFL.5105 TFL.5205 500 120 240 12 / 305 36 / 915 5 x 5 / 125 x 125 5 / 127 6/3 TFL1106 TFL1206 1000 120 240 12 / 205 36 / 915 6 x 6 / 155 x 155 6 / 153 7/4 TFL2108 TFL2208 TFL2408 2000 120 240 480 18 / 460 35 / 890 8 x 8 / 205 x 205 8 / 203 8/4 TFL3209 TFL3409 3000 240 480 18 / 460 35 / 890 9 x 9 / 230 x 230 9 / 239 13 / 6 TFL4211 TFL4411 4000 240 480 18 / 460 35 / 890 11 x 11 / 280 x 280 11 / 279 15 / 7 TFL5212 TFL5412 5000 240 480 18 / 460 31 / 790 12 x 12 / 305 x 305 12 / 305 18 / 8 TFL6213 TFL6413 6000 240 480 18 / 460 25 / 635 13 x 13 / 330 x 330 13 / 330 22 / 10 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Riser Length Hot Zone 7 Features • All Heaters come standard with the Option A Fuse. • Custom length available. Add $3 Per Inch. • Custom lengths and voltages available. See page 1 for details. • Extended guard length available. Add $1 Per Inch. Fluoropolymer (PTFE) Single Spiral Bayonet (10 watts/sq.in) Thermal Protector Cold Zone Overall Length Hot Zone Model No. Watts Volts Overall Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Weight (lb/kg) TR.5105 TR.5205 500 120 240 11 / 280 41 / 1040 5 / 152 6/3 TR1107 TR1207 1000 120 240 11 / 280 41 / 1040 7 / 180 7/4 TR2112 TR2212 TR2412 2000 120 240 480 17 / 432 40 / 1015 12 / 305 8/4 TR3216 TR3416 3000 240 480 23 / 585 40 / 1015 16 / 405 13 / 6 TR4220 TR4420 4000 240 480 29 / 735 40 / 1015 20 / 510 15 / 7 TR5225 TR5425 5000 240 480 35 / 890 36 / 915 25 / 635 17 / 8 TR6229 TR6429 6000 240 480 40 / 1015 30 / 760 29 / 735 21 / 10 TR8237 TR8437 8000 240 480 47 / 1195 40 / 1015 37 / 940 25 / 12 TR9244 TR9444 9000 240 480 54 / 1370 35 / 890 44 / 120 28 / 13 Features • All Heaters come standard with the Option A Fuse. • Custom riser available. Add $3 Per Inch. • Custom lengths and voltages available. See page 1 for details. • Extended guard riser available. Add $1 Per Inch. Fluoropolymer (PTFE) Single Spiral L-Style (10 watts/sq.in) Thermal Protector Riser Length Hot Zone 8 Model No. Watts Volts Riser Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Weight (lb/kg) TRL.5106 TRL.5206 500 120 240 12 / 305 41 / 1040 6 / 155 6/3 TRL1108 TRL1208 1000 120 240 12 / 205 41 / 1040 8 / 205 7/4 TRL2112 TRL2212 TRL2412 2000 120 240 480 18 / 460 40 / 1015 12 / 305 8/4 TRL3217 TRL3417 3000 240 480 18 / 460 40 / 1015 17 / 435 13 / 6 TRL4220 TRL4420 4000 240 480 18 / 460 40 / 1015 20 / 510 15 / 7 TRL5224 TRL5424 5000 240 480 18 / 460 36 / 915 24 / 610 18 / 8 TRL6229 TRL6429 6000 240 480 18 / 460 30 / 760 29 / 735 21 / 10 TRL8237 TRL8437 8000 240 480 18 / 460 40 / 1015 37 / 940 26 / 12 TRL9244 TRL9444 9000 240 480 18 / 460 35 / 890 44 / 120 29 / 13 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • All Heaters come standard with the Option A Fuse. • Custom riser available. Add $3 Per Inch. • Custom lengths and voltages available. See page 1 for details. • Extended guard riser available. Add $1 Per Inch. Fluoropolymer (PTFE) Single Bayonet (10 watts/sq.in.) Model No. Watts Volts Overall Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Width Weight (lb/kg) TRD.5111 TRD.5211 500 120 240 11 / 280 5 / 127 6 / 155 5 / 127 6/3 1000 120 240 11 / 280 5 / 127 6 / 155 6 / 153 7/4 TRD2118 TRD2218 TRD2418 2000 120 240 480 17 / 432 7 / 178 10 / 255 6 / 153 8/4 TRD3223 TRD3423 3000 240 480 23 / 585 11 / 280 12 / 305 6 / 153 13 / 6 TF4228 TF4229 4000 240 480 29 / 735 10 / 254 19 / 485 6 / 153 15 / 7 TRD5235 TRD5435 5000 240 480 35 / 890 15 / 381 20 / 510 6 / 153 18 / 8 TRD6240 TRD6440 6000 240 480 40 / 1015 18 / 457 22 / 560 6 / 153 22 / 10 TRD8247 TRD8447 8000 240 480 47 / 1195 11 / 280 36 / 915 6 / 153 25 / 12 TRD9254 TRD9454 9000 240 480 54 / 1370 14 / 356 40 / 1015 6 / 153 28 / 18 TRD1111 TRD1211 Thermal Protector Cold Zone Overall Length Hot Zone Width Features • All Heaters come standard with the Option A Fuse. • Extended lengths for 24 & 27 KW. Add $20 Per Inch. • Custom lengths and voltages available. See page 1 for details. • Extended guard lengths available. Add $6 Per Inch. • Extended lengths available. Add $10 per inch. • 3 Phase standard. Fluoropolymer (PTFE) Three Element (10 watts/sq.in.) Thermal Protector Model No. Watts Volts Overall Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Width Weight (lb/kg) TRC1.5111 TRC1.5211 1500 120 240 11 / 280 5 / 127 6 / 153 10 / 254 15 / 7 TRC3211 TRC3411 3000 120 240 11 / 280 5 / 127 6 / 153 10 / 254 20 / 10 TRC4.5217 TRC4.5417 4500 120 240 17 / 432 7 / 178 10 / 254 10 / 254 21 / 10 TRC6217 TRC6417 6000 120 240 17 / 432 7 / 178 10 / 254 12 / 305 21 / 10 TRC9223 TRC9423 9000 120 240 23 / 584 7 / 178 16 / 406 12 / 305 36 / 17 TRC12229 TRC12429 12000 120 240 29 / 737 9 / 229 20 / 508 13 / 305 42 / 20 TRC15235 TRC15435 15000 120 240 35 / 899 10 / 254 25 / 635 12 / 305 48 / 22 TRC18240 TRD18440 18000 120 240 40 / 1016 11 / 279 29 / 737 12 / 305 54 / 25 TRC2447 TRC4447 24000 120 240 47 / 1195 11 / 279 36 / 914 14 / 356 58 / 27 TRC27254 TRC27454 27000 120 240 54 / 1370 11 / 279 40 / 1016 14 / 356 64 / 29 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Cold Zone Overall Length Hot Zone Width 9 Features • All Heaters come standard with the Option A Fuse. • Extended guard lengths available. Add $6 Per Inch. • Custom lengths and voltages available. See page 1 for details. • 3 Phase standard. • Extended risers available. Add $10 Per Inch. Fluoropolymer (PTFE) Three Element L-Style (10 watts/sq.in.) Thermal Protector Riser Length Hot Zone Width Model No. Watts Volts Riser (in/mm) Max Riser (in/mm) Hot Zone (in/mm) Width Weight (lb/kg) TRLC3213 TRLC3413 3000 120 240 18 / 457 36 / 915 13 / 330 13 / 330 20 / 10 TRLC4.5211 TRLC4.5411 4500 120 240 18 / 457 36 / 915 11 / 279 11 / 279 21 / 20 TRLC6219 TRLC6419 6000 240 480 18 / 457 35 / 890 19 / 483 19 / 483 22 / 10 TRLC9223 TRLC9423 9000 240 480 18 / 457 35 / 890 23 / 585 23 / 585 26 / 17 TRLC12230 TRLC12430 12000 240 480 18 / 457 35 / 890 30 / 762 30 / 762 42 / 22 TRLC15236 TRLC15436 15000 240 480 18 / 457 31 / 790 36 / 914 36 / 914 48 / 22 TRLC18242 TRLC18442 18000 240 480 18 / 457 25 / 635 42 / 1067 42 / 1067 54 / 25 TRLC24240 TRLC24440 24000 240 480 18 / 457 28 / 710 43 / 1092 43 / 1092 58 / 27 TRLC27245 TRLC27445 27000 240 480 18 / 457 30 / 760 45 / 1143 45 / 1143 64 / 29 Features • All Heaters come standard with the Option A Fuse. • Extended guard lengths available. Add $1 Per Inch. • Custom lengths and voltages available. See page 1 for details. • 3 Phase standard. • Extended heater length available. Add $6 Per inch. Thermal Protector Cold Zone Overall Length Hot Zone 3” / 76mm 10 Fluoropolymer (PTFE) Three Tube Tubular (10 watts/sq.in.) Model No. Watts Volts Overall Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Weight (lb/kg) 3TR1117 3TR1217 1000 120 240 17 / 432 8 / 203 9 / 229 10 / 5 3TR1.5123 3TR1.5223 3TR1.5423 1500 120 240 480 23 / 584 8 / 203 15 / 381 11 / 5 3TR2129 3TR2229 3TR2429 2000 120 240 480 29 / 737 8 / 203 21 / 534 12 / 6 3TR3235 3TR3435 3000 240 480 35 / 889 7 / 178 28 / 711 14 / 7 3TR4247 3TR4447 4000 240 480 47 / 1194 9 / 230 38 / 965 17 / 8 3TR5259 3TR5459 5000 240 480 59 / 1499 12 / 305 47 / 1194 20 / 9 3TR6268 3TR6468 6000 240 480 68 / 1727 13 / 330 55 / 1397 23 / 11 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • All heaters come standard with the Option A Fuse. • Extended guard lengths available. Add $3 Per Inch. • Custom lengths and voltages available. See page 1 for details. • 3 Phase standard. • Extended heater length available. Add $6 Per inch. Fluoropolymer (PTFE) Six Tube Tubular (10 watts/sq.in.) Model No. Watts Volts Overall Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Weight (lb/kg) 6TR2118 6TR2218 6TR2418 2000 120 240 480 18 / 457 8 / 203 10 / 254 19 / 9 6TR3224 6TR3424 3000 240 480 24 / 610 8 / 203 16 / 407 22 / 10 6TR4229 6TR4429 4000 240 480 29 / 737 9 / 224 20 / 508 24 / 11 6TR6238 6TR6438 6000 240 480 38 / 965 8 / 203 30 / 762 27 / 13 6TR8247 6TR8447 8000 240 480 47 / 1194 7 / 178 40 / 1016 33 / 15 6TR10259 6TR10459 10000 240 480 59 / 1499 9 / 229 50 / 1270 40 / 18 6TR12268 6TR12468 12000 240 480 68 / 1727 10 / 254 60 / 1524 45 / 21 Thermal Protector Cold Zone Overall Length Hot Zone 4” / 102mm Features • All heaters come standard with the Option A Fuse. • Extended guard lengths available. Add $3 Per Inch. • Custom lengths and voltages available. See page 1 for details. • 3 Phase standard. • Extended heater length available. Add $6 Per inch. Fluoropolymer (PTFE) NineTube Tubular (10 watts/sq.in.) Model No. Watts Volts Overall Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Weight (lb/kg) 9TR3217 9TR3417 3000 240 480 17 / 432 8 / 203 9 / 230 28 / 13 9TR4.5223 9TR4.5423 4500 240 480 23 / 585 8 / 203 15 / 381 33 / 15 9TR6229 9TR6429 6000 240 480 29 / 737 8 / 203 21 / 533 36 / 17 9TR9235 9TR9435 9000 240 480 35 / 889 7 / 178 28 / 711 40 / 18 9TR12247 9TR12447 12000 240 480 47 / 1195 9 / 229 38 / 965 49 / 23 9TR15259 9TR15459 15000 240 480 59 / 1500 12 / 305 47 / 1195 60 / 28 9TR18268 9TR18468 18000 240 480 68 / 1727 13 / 330 55 / 1397 67 / 31 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Thermal Protector Cold Zone Overall Length Hot Zone 6” / 152mm 11 Features • All heaters come standard with the Option A (190°F) replaceable thermal overload Fuse. Thermal Shut-Off Option AH (329°F) for higher than 190°F. Option E (200°F) for resettable thermal overload (must be used with a manual reset temperature control) also available. • 3 Phase Single Tube Optional. Add 10% to Price. Add -3PH to Model Number. Example: WS0-4451-A-3PH • Chemically resistant plastic heater head standard. Heavy duty metal heater head available. Add $25 STEEL, Add $35 TY. Add –M to model number. Example: WS-4429-A-M. • Custom lengths and voltage available. See page 1 for details. Other Derated models available. • Plastisol Coated Heater Head Available. Add $20. Add letter “R” to beginning of model number. Ex: RWSO-2229-A. • * Heaters in 1 1⁄4” diameter shell. Heaters not marked with * are 2” standard. • ** Heaters come standard with Heavy duty metal heater head and 3⁄4” flexible conduit. Single Bayonet (35 watts/sq.in) Single Phase Standard - UL Listed Cold Zone Overall Length Hot Zone 3”dia 50.8mm Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Cold Zone (in/mm) Hot Zone Overall Length (in/mm) (in/mm) W1111* W1211* WS1111* WS1211* S1111* S1211* TY1111* TY1211* 1000 120 4 / 102 7 / 178 11 / 279 W2117 W2217 W2417 WS2117 WS2217 WS2417 S2117 S2217 S2417 TY2117 TY2217 TY2417 2000 120 240 480 7 / 178 10 / 254 17 / 432 W3222 W3422 WS3222 WS3422 S3222 S3422 TY3222 TY3422 3000 240 480 8 / 203 14 / 356 22 / 559 W4229 W4429 WS4229 WS4429 S4229 S4429 TY4229 TY4429 4000 240 480 10 / 254 19 / 483 29 / 737 W5235 W5435 WS5235 WS5435 S5235 S5435 TY5235 TY5435 5000 240 480 10 / 254 25 / 635 35 / 889 W6238 W6438 WS6238 WS6438 S6238 S6438 TY6238 TY6438 6000 240 480 10 / 254 28 / 711 38 / 965 W8247 W8447 WS8247 WS8447 S8247 S8447 TY8247 TY8447 8000 240 480 10 / 254 37 / 940 47 / 1194 W9251 W9451 WS9251 WS9451 S9251 S9451 TY9251 TY9451 9000 240 480 10 / 254 41 / 1041 51 / 1295 **W10259 W10459 **WS10259 WS10459 **S10259 S10459 **TY10259 TY10459 10000 240 480 10 / 254 49 / 1245 59 / 1499 **W12265 W12465 **WS12265 WS12465 **S12265 S12465 **TY12265 TY12465 12000 240 480 10 / 254 55 / 1397 65 / 1651 Derated Single Bayonet (17 watts/sq.in) Single Phase Standard - UL Listed Cold Zone Overall Length Hot Zone 3”dia 50.8mm 12 Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Cold Zone (in/mm) WO1117 WO1217 WSO1117 WSO1217 SO1117 SO1217 TYO1117 TYO1217 1000 240 480 7 / 178 10 / 254 17 / 232 WO2129 WO2229 WO2429 WSO2129 WSO2229 WSO2429 SO2129 SO2229 SO2429 TYO2129 TYO2229 TYO2429 2000 120 240 480 10 / 254 19 / 483 29 / 737 WO3238 W3438 WSO3238 WSO3438 SO3238 SO3438 TYO3238 TYO3438 3000 240 480 10 / 254 28 / 711 38 / 966 WO4251 WO4451 WSO4251 WSO4451 SO4251 SO4451 TYO4251 TYO4451 4000 240 480 10 / 254 41 / 1041 51 / 1295 WO5259 WO5459 WSO5259 WSO5459 SO5259 SO5459 TYO5259 TYO5459 5000 240 480 10 / 254 49 / 1245 59 / 1499 WO6265 WO6465 WSO6265 WSO6465 SO6265 SO6465 TYO6265 TYO6465 6000 240 480 10 / 254 55 / 1397 65 / 1651 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Hot Zone Overall Length (in/mm) (in/mm) Features • All heaters come standard with the Option A (190°F) replaceable thermal overload Fuse. Thermal Shut-Off Option AH (329°F) for higher than 190°F. Option E (200°F) for resettable thermal overload (must be used with a manual reset temperature control) also available. • 3 Phase standard. 1 Phase available up to 12KW for 208V/240V and up to 24KW for 480V. Some require a metal head Add $60.00 Steel, $70.00 Titanium.. Add -1PH to model number. Ex: WSC-6217-1PH. Please Consult Factory. • Chemically resistant plastic heater head standard. • Metal heater head available. Add $60 STEEL, Add $70 TY. Add –M to model number. Ex: WSCO-6429-A-M • Other Derated models Available. • ** Heaters come standard with Heavy duty metal heater head and 3⁄4” flexible conduit. • * Heaters in 1 1⁄4” diameter shell. Heaters not marked with * are 2” standard. • ** Heaters come standard with Heavy duty metal heater head and 3⁄4” flexible conduit. • Custom sizes and Voltage Available. See page 1 for details. Triple Bayonet (35 watts/sq.in) Single Phase Standard - UL Listed Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Cold Zone (in/mm) Hot Zone (in/mm) *WC3211 *WC3411 *WSC3211 *WSC3411 *SC3211 *SC3411 *TYC3211 *TYC3411 3000 240 480 4 / 102 7 / 178 WC6217 WC6417 WSC6217 WSC6417 SC6217 SC6417 TYC6217 TYC6417 6000 240 480 7 / 178 10 / 254 WC9222 WC9422 WSC9222 WSC9422 SC9222 SC9422 TYC9222 TYC9422 9000 240 480 8 / 205 14 / 356 WC12229 WC12429 WSC12229 WSC12429 SC12229 SC12429 TYC12229 TYC12429 12000 240 480 10 / 254 19 / 483 WC15235 WC15435 WSC15235 WSC15435 SC15235 SC15435 TYC15235 TYC15435 15000 240 480 10 / 254 25 / 635 **WC18238 WC18438 **WSC18238 WSC18438 **SC18238 SC18438 **TYC18238 TYC18438 18000 240 480 10 / 254 28 / 711 **WC24247 WC24447 **WSC24247 WSC24447 **SC24247 SC24447 **TYC24247 TYC24447 24000 240 480 10 / 254 37 / 940 **WC27251 WC27451 **WSC27251 WSC27451 **SC27251 SC27451 **TYC27251 TYC27451 27000 240 480 10 / 254 41 / 1041 **WC30259 WC30459 **WSC30259 WSC30459 **SC30259 SC30459 **TYC30259 TYC30459 30000 240 480 10 / 254 49 / 1245 **WC36265 WC36465 **WSC36265 WSC36465 **SC36265 SC36465 **TYC36265 TYC36465 36000 240 480 10 / 254 55 / 1397 Cold Zone Overall Length Hot Zone 9” / 266mm Derated Triple Bayonet (17 watts/sq.in) Single Phase Standard - UL Listed Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Cold Zone (in/mm) WCO3217 WCO3417 WSCO3217 WSCO3417 SCO3217 SCO3417 TYCO3217 TYCO3417 3000 240 480 7 / 178 10 / 254 17 / 432 WCO6227 WCO6447 WSCO6227 WSCO6447 SCO6227 SCO6447 TYCO6227 TYCO6447 6000 240 480 10 / 254 19 / 483 29 / 737 WCO9238 WCO9438 WSCO9238 WSCO9438 SCO9238 SCO9438 TYCO9238 TYCO9438 9000 240 480 10 / 254 28 / 711 38 / 965 WCO12251 WCO12451 WSCO12251 WSCO12451 SCO12251 SCO12451 TYCO12251 TYCO12451 12000 240 480 10 / 254 41 / 1041 51 / 1295 WCO15229 WCO15429 WSCO15229 WSCO15429 SCO15229 SCO15429 TYCO15229 TYCO15429 15000 240 480 10 / 254 49 / 1245 59 / 1499 18000 240 480 10 / 254 55 / 1397 65 / 1651 **WCO18265 **WSCO18265 **SCO18265 **TYCO18265 WCO18465 WSCO18465 SCO18465 TYCO18465 Hot Zone Overall Length (in/mm) (in/mm) P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Cold Zone Overall Length Hot Zone 9” / 266mm 13 Features • All heaters come standard with the Option A (190°F) replaceable thermal overload Fuse. Thermal Shut-Off Option AH (329°F) for higher than 190°F. Option E (200°F) for resettable thermal over load (must be used with a manual reset temperature control) also available. • 1 Phase standard. 3 Phase single tube optional. Add 10% to Price. Add -3PH to Model Number. Example: WSL-4225-A-3PH. • Goose Neck Riser 2” Diameter Configuration Available. Add GN to model number. Ex: SL-3221-A-R19-GN6. (6” Gooseneck Std.) $25.00. • Chemically Resistant Plastic Heater Head Standard. Metal Heater Head Available. Add $25 STEEL, Add $35 TY. Add –M to model number. Ex: WSLO-6262-A-R25-M. • 2” – 8” Sludge Feet available. Add $25 for single tube models $35.00 for triple tube models. Add SL4-SL8 to model number. Ex: SL-6235-A-SL4. • Other voltages available. Please consult with factory. • Extended riser lengths available. Add –R to suffix of model number followed by the desired riser length in inches. Ex. WLO-44448-A-R62 Add $3.00 per inch over standard riser lengths listed. • * Heaters in 1 1⁄4” diameter shell. Heaters not marked with * are 2” standard. • ** Heaters come standard with Heavy duty metal heater head and 3⁄4” flexible conduit. • Plastisol Coated Heater Head Available. Add $40 and R to the Prefix of model number. Ex: RWSL-6235-A-R19. Single Tube L-Style (35 watts/sq.in) Single Phase Standard - UL Listed Riser Length Hot Zone Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Hot Zone (in/mm) Shell Dia. (in) “WL1113 *WL1213 “WSL1113 *WSL1213 “SL1113 *SL1213 “TYL1113 *TYL1213 1000 120 240 13 / 330 1 - 1/4 15 / 381 WL2117 WL2217 WL2417 WSL2117 WSL2217 WSL2417 SL2117 SL2217 SL2417 TYL2117 TYL2217 TYL2417 2000 120 240 480 17 / 432 2 19 / 483 WL3221 WL3421 WSL3221 WSL3421 SL3221 SL3421 TYL3221 TYL3421 3000 240 480 21 / 533 2 25 / 635 WL4225 WL4425 WSL4225 WSL4425 SL4225 SL4425 TYL4225 TYL4425 4000 240 480 25 / 635 2 25 / 635 WL5232 WL5432 WSL5232 WSL5432 SL5232 SL5432 TYL5232 TYL5432 5000 240 480 32 / 813 2 25 / 635 WL6235 WL6435 WSL6235 WSL6435 SL6235 SL6435 TYL6235 TYL6435 6000 240 480 35 / 889 2 50 / 1270 WL8244 WL8444 WSL8244 WSL8444 SL8244 SL8444 TYL8244 TYL8444 8000 240 480 44 / 1118 2 50 / 1270 WL9248 WL9448 WSL9248 WSL9448 SL9248 SL9448 TYL9248 TYL9448 9000 240 480 48 / 1220 2 50 / 1270 **WL10256 WL10456 **WSL10256 WSL10456 **SL10256 SL10456 **TYL10256 TYL10456 10000 240 480 56 / 1423 2 50 / 1270 **WL12262 WL12462 **WSL12262 WSL12462 **SL12262 SL12462 **TYL12262 TYL12462 12000 240 480 62 / 1575 2 50 / 1270 Riser Length (in/mm) Derated Single Tube L-Style (35 watts/sq.in) Single Phase Standard - UL Listed Riser Length Hot Zone 14 Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Hot Zone (in/mm) Shell Dia. (in) Riser Length (in/mm) WLO1117 WLO1217 WSLO1117 WSLO1217 SLO1117 SLO1217 TYLO1117 TYLO1217 1000 120 17 / 432 2 19 / 483 WLO2125 WLO2227 WLO2425 WSLO2125 WSLO2227 WSLO2425 SLO2125 SLO2227 SLO2425 TYLO2125 TYLO2227 TYLO2425 2000 120 240 480 25 / 635 2 25 / 635 WLO3235 WLO3435 WSLO3235 WSLO3435 SLO3235 SLO3435 TYLO3235 TYLO3435 3000 240 480 35 / 889 2 50 / 1270 WCO4244 WCO4444 WSCO4244 WSCO4444 SLO4244 SLO4444 TYLO4244 TYLO4444 4000 240 480 44 / 1118 2 50 / 1270 WCO5256 WCO5456 WSCO5256 WSCO5456 SLO5256 SLO5456 TYLO5256 TYLO5456 5000 240 480 56 / 1423 2 50 / 1270 WCO6262 WCO6262 WSCO6262 WSCO6262 SLO6262 SLO6262 TYLO6262 TYLO6262 6000 240 480 62 / 1575 2 50 / 1270 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • All heaters come standard with the Option A (190°F) replaceable thermal overload Fuse. Thermal Shut-Off Option AH (329°F) for higher than 190°F. Option E (200°F) for resettable thermal over load (must be used with a manual reset temperature control) also available. • 1 Phase standard. 3 Phase single tube optional. Add 10% to Price. Add -3PH to Model Number. Example: WSL-4225-A-3PH. • Goose Neck Riser 2” Diameter Configuration Available. Add GN to model number. Ex: SL-3221-A-R19-GN6. (6” Gooseneck Std.) $25.00. • Chemically Resistant Plastic Heater Head Standard. Metal Heater Head Available. Add $25 STEEL, Add $35 TY. Add –M to model number. Ex: WSLO-6262-A-R25-M. • 2” – 8” Sludge Feet available. Add $25 for single tube models $35.00 for triple tube models. Add SL4-SL8 to model number. Ex: SL-6235-A-SL4. • Other voltages available. Please consult with factory. • Extended riser lengths available. Add –R to suffix of model number followed by the desired riser length in inches. Ex. WLO-44448-A-R62 Add $3.00 per inch over standard riser lengths listed. • * Heaters in 1 1⁄4” diameter shell. Heaters not marked with * are 2” standard. • ** Heaters come standard with Heavy duty metal heater head and 3⁄4” flexible conduit. • Plastisol Coated Heater Head Available. Add $40 and R to the Prefix of model number. Ex: RWSL-6235-A-R19. Triple Tube L-Style (35 watts/sq.in) Single Phase Standard - UL Listed Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Hot Zone (in/mm) Shell Dia. (in) *WLC3214 *WLC3414 *WSLC3214 *WSLC3414 *SLC3214 *SLC3414 *TYLC3214 *TYLC3414 3000 240 480 14 / 356 1 - 1/4 15 / 381 WLC6219 WLC6419 WSLC6219 WSLC6419 SLC6219 SLC6419 TYLC6219 TYLC6419 6000 240 480 19 / 483 2 19 / 483 WLC9224 WLC9424 WSLC9224 WSLC9424 SLC9224 SLC9424 TYLC9224 TYLC9424 9000 240 480 24 / 610 2 25 / 635 WLC12227 WLC12427 WSLC12227 WSLC12427 SLC12227 SLC12427 TYLC12227 TYLC12427 12000 240 480 27 / 686 2 25 / 635 WLC15234 WLC15434 WSLC15234 WSLC15434 SLC15234 SLC15434 TYLC15234 TYLC15434 15000 240 480 34 / 864 2 25 / 635 **SLC18237 **TYLC18237 SLC18437 TYLC18437 18000 240 480 37 / 940 2 50 / 1270 **WLC24246 **WSLC24246 **SLC24246 **TYLC24246 WLC24446 WSLC24446 SLC24446 TYLC24446 24000 240 480 46 / 1169 2 50 / 1270 **WLC27250 **WSLC27250 **SLC27250 **TYLC27250 WLC27450 WSLC27450 SLC27450 TYLC27450 27000 240 480 50 / 1270 2 50 / 1270 **WLC30258 **WSLC30258 **SLC30258 **TYLC30258 WLC30458 WSLC30458 SLC30458 TYLC30458 30000 240 480 58 / 1474 2 50 / 1270 **WLC36264 **WSLC36264 **SLC36264 **TYLC36264 WLC36464 WSLC36464 SLC36464 TYLC36464 36000 240 480 64 / 1626 2 50 / 1270 **WLC18237 **WSLC18237 WLC18437 WSLC18437 Riser Length (in/mm) Riser Length Hot Zone *Gooseneck optional add - GN Derated Triple Tube L-Style (17 watts/sq.in) Single Phase Standard - UL Listed Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts WLCO3219 WLCO3419 WSLCO3219 WSLCO3419 SLCO3219 SLCO3419 TYLCO3219 TYLCO3419 3000 240 480 19 / 483 2 19 / 483 WLCO6227 WLCO6427 WSLCO6227 WSLCO6427 SLCO6227 SLCO6427 TYLCO6227 TYLCO6427 6000 240 480 27 / 686 2 25 / 635 WLCO9237 WLCO9437 WSLCO9237 WSLCO9437 SLCO9237 SLCO9437 TYLCO9237 TYLCO9437 9000 240 480 37 / 939 2 50 / 1270 WLCO12250 WLCO12450 WSLCO12250 WSLCO12450 SLCO12250 SLCO12450 TYLCO12250 TYLCO12450 12000 240 480 50 / 1270 2 50 / 1270 WLCO15258 WLCO15458 WSLCO15258 WSLCO15458 SLCO15258 SLCO15458 TYLCO15258 TYLCO15458 15000 240 480 58 / 1473 2 50 / 1270 **WLCO18264 WLCO18464 **WSLCO18264 WSLCO18464 **SLCO18264 SLCO18464 **TYLCO18264 TYLCO18464 18000 240 480 64 / 1626 2 50 / 1270 Hot Zone Shell Dia. Riser Length (in/mm) (in/mm) (in/mm) P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Riser Length Hot Zone *Gooseneck optional add - GN 15 Features • All heaters come standard with the Option A (190°F) replaceable thermal overload Fuse. Thermal Shut-Off Option AH (329°F) for higher than 190°F process or Option E (200°F) for resettable thermal overload (must be used with a manual reset temperature control) also available. • 3 Phase standard. 1 Phase available up to 12KW for 208V/240V and up to 24KW for 480V. Some require a metal head. Add $25.00 Steel, $35.00 Titanium. Add -1PH to model number. Ex: WSLCV-6219-A-1PH. Please Consult Factory. • Goose Neck Riser 2” Diameter Configuration Available. Add GN to model number. Ex: SLCV-3214-A-R19-GN6. (6” Goose Neck Std.) $25.00 • Plastisol Coated Heater Head Available. Add $40 and R to the Pre fix of model number. Ex: RWSLCV-6219-A-R19. • 2” – 8” Sludge Feet available. Add $25 for single tube models $35.00 for triple tube models. Add SL4-SL8 to model number. Ex: SLCV-12427-A-SL4. • Other voltages available. Please consult with factory. • Extended riser lengths available. Add –R to suffix of model number followed by the desired riser length in inches. Ex. WLCV-18237-A-R62 Add $3.00 per inch over standard riser lengths listed. • * Heaters in 1 1⁄4” diameter shell. • ** Heaters come standard with Heavy duty metal heater head and 3⁄4” flexible conduit. • Chemically Resistant Plastic Heater Head Standard. Metal Heater Head Available. Add $25 STEEL, Add $35 TY. Add –M to model number. Ex: WSLCV-6219-A-R25-M L-Type Vertical Stack (35 watts/sq.in) Single Phase Standard - UL Listed Riser Length Hot Zone 9“/266mm Hot Zone Shell Dia. Riser Length (in/mm) (in/mm) (in/mm) Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts *WLCV3214 *WLCV3414 *WSLCV3214 *WSLCV3414 *SLCV3214 *SLCV3414 *TYLCV3214 *TYLCV3414 3000 240 480 14 / 356 1 / 1/4 15 / 381 WLCV6219 WLCV6419 WSLCV6219 WSLCV6419 SLCV6219 SLCV6419 TYLCV6219 TYLCV6419 6000 240 480 19 / 483 2 19 / 483 WLCV9224 WLCV9424 WSLCV9224 WSLCV9424 SLCV9224 SLCV9424 TYLCV9224 TYLCV9424 9000 240 480 24 / 610 2 25 / 635 WLCV12227 WLCV12427 WSLCV12227 WSLCV12427 SLCV12227 SLCV12427 TYLCV12227 TYLCV12427 12000 240 480 27 / 686 2 25 / 635 WLCV15234 WLCV15434 WSLCV15234 WSLCV15434 SLCV15234 SLCV15434 TYLCV15234 TYLCV15434 15000 240 480 34 / 864 2 25 / 636 **WLCV18237 WLCV18437 **WSLCV18237 WSLCV18437 **SLCV18237 SLCV18437 **TYLCV18237 TYLCV18437 18000 240 480 37 / 939 2 50 / 1270 **WLCV24246 WLCV24446 **WSLCV24246 WSLCV24446 **SLCV24246 **TYLCV24246 SLCV24446 TYLCV24446 24000 240 480 46 / 1168 2 50 / 1270 **WLCV27250 WLCV27450 **WSLCV27250 WSLCV27450 **SLCV27250 **TYLCV27250 SLCV27450 TYLCV27450 27000 240 480 50 / 1270 2 50 / 1270 **WLCV30258 WLCV30458 **WSLCV30258 WSLCV30458 **SLCV30258 **TYLCV30258 SLCV30458 TYLCV30458 30000 240 480 58 / 1473 2 50 / 1270 **WLCV36464 **WSLCV36464 **SLCV36464 36000 240 480 64 / 1626 2 50 / 1270 *TYLCV36464 Derated L-Type Vertical Stack (35 Watts/sq.in) Three Phase Standard - UL Listed Riser Length Hot Zone 16 9“/266mm Hot Zone Shell Dia. Riser Length (in/mm) (in) (in/mm) Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts WLCOV3219 WLCOV3419 WSLCOV3219 WSLCOV3419 SLCOV3219 SLCOV3419 TYLCOV3219 TYLCOV3419 3000 240 480 19 / 483 2 19 / 483 WLCOV6227 WLCOV6427 WSLCOV6227 WSLCOV6427 SLCOV6227 SLCOV6427 TYLCOV6227 TYLCOV6427 6000 240 480 27 / 686 2 25 / 635 WLCOV9237 WLCOV9437 WSLCOV9237 WSLCOV9437 SLCOV9237 SLCOV9437 TYLCOV9237 TYLCOV9437 9000 240 480 37 / 940 2 50 / 1270 WLCOV12250 WLCOV12450 WSLCOV12250 WSLCOV12450 SLCOV12250 SLCOV12450 TYLCOV12250 TYLCOV12450 12000 240 480 50 / 1270 2 50 / 1270 WLCOV15258 WLCOV15458 WSLCOV15258 WSLCOV15458 SLCOV15258 SLCOV15458 TYLCOV15258 TYLCOV15458 15000 240 480 58 / 1474 2 50 / 1270 **WLCOV18264 **WSLCOV18264 **SLCOV18264 **TYLCOV18264 WLCOV18464 WSLCOV18464 SLCOV18464 TYLCOV18464 18000 240 480 64 / 1626 2 50 / 1270 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • **Heaters come with 3⁄4” flexible conduit. • * Mounts with 1 1⁄4” NPT bushing. Metal Inline Threaded Heater (35 Watts/sq.in) - UL Listed Insertion Length Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts Length (in/mm) (in/mm) Hot Zone (in/mm) *WT1113 *WT1213 *WST1113 *WST1213 *ST1113 *ST1213 *TYT1113 *TYT1213 1000 120 240 13 / 330 10 / 254 7 / 178 WT2116 WT2216 WT2416 WST2116 WST2216 WST2416 ST2116 ST2216 ST2416 TYT2116 TYT2216 TYT2416 2000 120 240 480 16 / 406 13 / 330 10 / 254 WT3221 WT3421 WST3221 WST3421 ST3221 ST3421 TYT3221 TYT3421 3000 240 480 21 / 533 18 / 457 14 / 356 WT4225 WT4425 WST4225 WST4425 ST4225 ST4425 TYT4225 TYT4425 4000 240 480 25 / 635 22 / 559 19 / 483 WT5232 WT5432 WST5232 WST5432 ST5232 ST5432 TYT5232 TYT5432 5000 240 480 32 / 813 29 / 737 25 / 635 WT6235 WT6435 WST6235 WST6435 ST6235 ST6435 TYT6235 TYT6435 6000 240 480 35 / 889 32 / 889 28 / 711 WT8244 WT8444 WST8244 WST8444 ST8244 ST8444 TYT8244 TYT8444 8000 240 480 44 / 1118 44 / 1118 37 / 940 WT9248 WT9448 WST9248 WST9448 ST9248 ST9448 TYT9248 TYT9448 9000 240 480 48 / 1219 48 / 1219 41 / 104 WT12261 WT12461 WST12261 WST12461 ST12261 ST12461 TYT12261 TYT12461 12000 240 480 61 / 1549 61 / 1549 55 / 1397 Overall Length Insertion Length Hot Zone Features • Thermal overload protection not available. Recommend use of liquid level control switch. See accessories section for options. • Mounts with 1 1⁄4” NPT bushing. • 1 Phase standard. 3 Phase available. Add 10% to price. Add -3PH to model number. Ex. WTO6461-3PH • Other voltages available. Please consult with factory. Derated Metal Inline Threaded Heater (35 Watts/sq.in) - UL Listed Insertion Length (in/mm) Length (in/mm) Hot Zone (in/mm) 120 240 13 / 330 16 / 406 10 / 254 2000 120 240 480 22 / 635 25 / 635 19 / 483 TYTO3235 TYTO3435 3000 240 480 32 / 813 35 / 889 28 / 711 STO4248 STO4448 TYTO4248 TYTO4448 4000 240 480 45 / 1143 48 / 1219 41 / 1042 STO6261 STO6461 TYTO6261 TYTO6461 6000 240 480 58 / 1473 61 / 1549 55 / 1397 Mild Steel Model No. 304 SS Model No. 316 SS Model No. Titanium Model No. Watts Volts WTO1116 WTO1216 WSTO1116 WSTO1216 STO1116 STO1216 TYTO1116 TYTO1216 1000 WTO2125 WTO2225 WTO2425 WSTO2125 WSTO2225 WSTO2425 STO2125 STO2225 STO2425 TYTO2125 TYTO2225 TYTO2425 WTO3235 WTO3435 WSTO3235 WSTO3435 STO3235 STO3435 WTO4248 WTO4448 WSTO4248 WSTO4448 WTO6261 WTO6461 WSTO6261 WSTO6461 Overall Length P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Insertion Length Hot Zone 17 Features • 36” corrosion resistant thermoplastic flexible conduit. Longer lengths available at $4.00 each additional foot. • Acids. • Factory sealed for longer life. • 25 watts/sq. inch. • True radiant heat transfer for faster heat up. • Plastisol coated heater heads available. • Thermal protection (AG) standard (AHG) optional for process temperatures above 190°F. • 1 Phase standard. 3 Phase single tube optional. Add 10% to Price. Add -3PH to Model Number. Example: G-4241-A-3PH. • Polypropylene guard standard. Quartz Single Bayonet - Single Phase Standard - Three Phase Available Cold Zone Overall Length Hot Zone *Guard optional 18 Model No. Watts Volts Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Weight (lb/kg) G.5112 500 120 12 / 305 6 / 153 6 / 153 9 /4 G1112 G1212 1000 120 240 12 / 305 6 / 153 6 / 153 10 / 5 G1117 G1217 1000 120 240 17 / 432 10 / 254 7 / 178 11 / 5 G2218 G2418 2000 240 480 18 / 457 6 / 153 12 / 305 11 /5 G2223 G2423 2000 240 480 23 / 584 11 / 153 12 / 305 14 /7 G3224 G3424 3000 240 480 24 / 607 6 / 153 18 / 457 14 / 7 G3229 G3429 3000 240 480 29 / 737 11 / 279 18 / 457 17 / 8 G3.5229 G3.5429 3500 240 480 29 / 737 8 / 203 21 / 533 17 / 8 G4235 G4435 4000 240 480 35 / 889 7 / 178 28 / 711 20 / 9 G4241 G4441 4000 240 480 41 / 1041 13 / 330 28 / 711 23/ 11 G5241 G5441 5000 240 480 41/ 1041 8 / 203 33 / 838 23 / 11 G5247 G5447 5000 240 480 47 / 1194 14 / 356 33 / 838 26 / 13 G6247 G6447 6000 240 480 47 / 1194 8 / 203 39 /991 26 / 13 G6252 G6452 6000 240 480 52 / 1321 13 / 330 39 / 991 29 / 13 G8259 G8459 8000 240 480 59 / 1499 10 / 254 49 / 1244 31 / 14 G10271 G10471 10000 240 480 71 / 1803 9 / 229 62 / 1575 34 / 16 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • 36” corrosion resistant thermoplastic flexible conduit. Longer lengths available at $4.00 each additional foot. • Acids. • Factory sealed for longer life. • 25 watts/sq. inch. • True radiant heat transfer for faster heat up. • Thermal protection (AG) standard (AHG) optional for process temperatures above 190°F. • Polypropylene guard standard. • Plastisol coated heater heads available. • Customer has option to wire Quartz Triple Bayonet heater 1 Phase or 3 Phase. Quartz Triple Bayonet - Consists of 3 Individual Elements. Wired For Single or Three Phase Model No. Watts Volts Length (in/mm) Cold Zone (in/mm) Hot Zone (in/mm) Weight (lb/kg) GC1.5112 GC1.5212 1500 120 240 12 / 305 6 / 153 6 / 153 21 / 10 GC3112 GC3212 3000 120 240 12 / 305 6 / 153 6 / 153 22 / 10 GC3117 GC3217 3000 120 240 17 / 432 10 / 254 7 / 178 26 / 12 GC6218 GC6418 6000 240 480 18 / 457 6 / 153 12 / 305 26 / 12 GC6223 GC6423 6000 240 480 23 / 584 11 / 279 12 / 305 30 / 14 GC9224 GC9424 9000 240 480 24 / 607 6 / 153 18 / 457 30 / 14 GC9229 G9429 9000 240 480 29 / 737 11 / 279 18 / 457 34 / 16 GC10.5229 GC10.5429 10500 240 480 29 / 737 8 / 203 21 / 533 35 / 16 GC12235 GC12435 12000 240 480 35 / 889 7 / 178 28 / 711 38 / 17 GC12241 GC12441 12000 240 480 41 / 1041 13 / 330 28 / 710 44 / 20 GC15241 GC15441 15000 240 480 41 / 1041 8 / 203 33 / 838 44 / 20 GC15247 GC15447 15000 240 480 47 / 1194 14 / 356 33 / 838 48 / 22 GC18247 GC18447 18000 240 480 47 / 1194 8 / 203 39 / 991 48 / 22 GC18252 GC18452 18000 240 480 52 / 1321 13 / 330 39 / 991 52 / 24 GC24259 GC24459 24000 240 480 59 / 1499 10 / 254 49 / 1245 55 / 25 GC30271 GC30471 30000 240 480 71 / 1803 9 / 227 62 / 1575 65 / 30 Cold Zone Overall Length Hot Zone *Guard optional P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 19 Features • * Heaters in 1 1⁄4” diameter shell. • QUICKPLUG™ systems come complete with heater and control. Option A (190°F) fuse standard. • QUICKPLUG™ systems and replacement heaters are 1 Phase. • Chemically resistant plastic heater head standard. • 120V systems come with 5-15P wall plug. 240V systems come with 6-20P wall plug. • Plastisol coated heater heads available. • Heavy duty welded metal heater head available. Add $25 STEEL, add $35 TY, add -M to model number. Example: QDWS1.0-M QUICKPLUG TM Bayonet Heating Systems w/ Digital Control, Heater, and (FEP) Sleved Senror 10ft 304SS Model No. 316SS Model No. Titanium Model No. Watts Volts Length (in/mm) Hot Zone (in/mm) QDWS.5* QDWS.5-2* QDS.5* QDS.5-2* QDTY.5* QDTY.5-2* 500 120 240 11 / 280 7 / 178 QDWS1.0* QDWS1.0-2* QDS1.0* QDS1.0-2* QDTY1.0* QDTY1.0-2* 1000 120 240 11 / 280 7 / 178 QDWS1.5 QDWS1.5-2 QDS1.5 QDS1.5-2 QDTY1.5 QDTY1.5-2 1500 120 240 17 / 432 1O / 254 QDWS1.5L28 QDWS1.5L28-2 QDS1.5L28 QDS1.5L28-2 QDTY1.5L28 QDTY1.5L28-2 1500 120 240 28 / 711 1O / 254 QDWS1.8 QDWS1.8-2 QDS1.8 QDS1.8-2 QDTY1.8 QDTY1.8-2 1800 120 240 17 / 432 1O / 254 QDWS2.0 QDS2.0 QDTY2.0 2000 240 17 / 432 1O / 254 QDS2.5 QDTY2.5 2500 240 21 / 533 14 / 356 QDWS2.5 QDWS3.0 QDS3.0 QDTY3.0 3000 240 28 / 711 19 / 483 QDWS3.5 QDS3.5 QDTY3.5 3500 240 29 / 711 19 / 483 QDWS4.0 QDS4.0 QDTY4.0 4000 240 29 / 737 19 / 483 Features TM • * Heaters in 1 1⁄4” diameter shell. • Heaters not marked with * are 2” diameter standard. QUICKPLUG TM Replacement Standard Bayonet Heater w/ Safty Fuse 20 304SS System 316SS Heater 316SS System Titanium System QDWS.5* QDWS.5-2* QDWS.5ARE* QDWS.5-2ARE* QDS.5ARE* QDS.5-2ARE* QDTY.5* QDTY.5-2* QDWS1.0* QDWS1.0-2* QDWS1.0ARE* QDWS1.0-2ARE* QDS1.0ARE* QDS1.0-2ARE* QDTY1.0* QDTY1.0-2* QDWS1.5 QDWS1.5-2 QDWS1.5ARE QDWS1.5-2ARE QDS1.5ARE QDS1.5-2ARE QDTY1.5 QDTY1.5-2 QDWS1.5L28 QDWS1.5L28-2 QDWS1.5L28ARE QDWS1.5L28-2ARE QDS1.5L28ARE QDS1.5L28-2ARE QDTY1.5L28 QDTY1.5L28-2 QDWS1.8 QDWS1.8-2 QDWS1.8ARE QDWS1.8-2ARE QDS1.8ARE QDS1.8-2ARE QDTY1.8 QDTY1.8-2 QDWS2.0 QDWS2.0ARE QDS2.0ARE QDTY2.0 QDWS2.5 QDWS2.5ARE QDS2.5ARE QDTY2.5 QDWS3.0 QDWS3.0ARE QDS3.0ARE QDTY3.0 QDWS3.5 QDWS3.5ARE QDS3.5ARE QDTY3.5 QDWS4.0 QDWS4.0ARE QDS4.0ARE QDTY4.0 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • 120V systems come with 5-15P wall plug. 240V systems come with 6-20P wall plug. • * Heaters in 1 1⁄4” diameter shell. • QUICKPLUG™ systems come complete with heater and control. Option A (190°F) fuse standard. • Plastisol coated heater heads available. • QUICKPLUG™ systems and replacement heaters are 1 Phase. • Heavy duty welded metal heater head available. Add $25 STEEL, add $35 TY, add -M to model number. Example: QDWS1.0-M • Chemically resistant plastic heater head standard. QUICKPLUG TM L-Style Heating Systems w/ Digital Control, Heater, Safty Fuse, and (FEP) Sleved Senror 10ft Riser Length Hot Zone (in/mm) (in/mm) 304SS L Model No. 316SS L Model No. Titanium L Model No. Watts Volts QDWSL.5* QDWSL.5-2* QDSL.5* QDSL.5-2* QDTYL.5* QDTYL.5-2* 500 120 240 24 / 610 8.5 / 216 QDWSL1.0* QDWSL1.0-2* QDSL1.0* QDSL1.0-2* QDTYL1.0* QDTYL1.0-2* 1000 120 240 24 / 610 13 / 330 QDWSL1.5 QDWS1L.5-2 QDSL1.5 QDSL1.5-2 QDTYL1.5 QDTYL1.5-2 1500 120 240 24 / 610 17 / 432 QDWSL1.5L28 QDWSL1.5L28-2 QDSL1.5L28 QDSL1.5L28-2 QDTYL1.5L28 QDTYL1.5L28-2 1500 120 240 24 / 610 17 / 432 QDWSL1.8 QDWSL1.8-2 QDSL1.8 QDSL1.8-2 QDTYL1.8 QDTYL1.8-2 1800 120 240 24 / 610 17 / 432 QDWSL2.0 QDSL2.0 QDTYL2.0 2000 240 24 / 610 17 / 432 QDWSL2.5 QDSL2.5 QDTYL2.5 2500 240 24 / 610 22 / 559 QDWSL3.0 QDSL3.0 QDTYL3.0 3000 240 24 / 610 22 / 559 QDWSL3.5 QDSL3.5 QDTYL3.5 3500 240 24 / 610 29 / 737 QDTYL4.0 4000 240 24 / 610 29 / 737 QDWSL4.0 QDSL4.0 Features • Heaters not marked with * are 2” diameter standard. • * Heaters in 1 1⁄4” diameter shell. QUICKPLUG TM Replacement L-Style Heater w/ Safty Fuse 304SS System L-Shape 304SS Heater L-Shape 316SS System L-Shape 316SS Heater L-Shape Titanium System L-Shape Titanium Heater L-Shape QDWSL.5* QDWSL.5-2* QDWSL.5ARE* QDWSL.5-2ARE* QDSL.5* QDSL.5-2* QDSL.5ARE* QDSL.5-2ARE* QDTYL.5* QDTYL.5-2* QDTYL.5ARE* QDTYL.5-2ARE* QDWSL1.0* QDWSL1.0-2* QDWSL1.0ARE* QDWSL1.0-2ARE* QDSL1.0* QDSL1.0-2* QDSL1.0ARE* QDSL1.0-2ARE* QDTYL1.0* QDTY1L.0-2* QDTYL1.0ARE* QDTY1L.0-2ARE* QDWSL1.5 QDWS1L.5-2 QDWSL1.5ARE QDWSL1.5-2ARE QDSL1.5 QDS1L.5-2 QDSL1.5ARE QDSL1.5-2ARE QDTYL1.5 QDTYL1.5-2 QDTYL1.5ARE QDTYL1.5-2ARE QDWSL1.8 QDWSL1.8-2 QDWSL1.8ARE QDWSL1.8-2ARE QDSL1.8 QDSL1.8-2 QDSL1.8ARE QDSL1.8-2ARE QDTYL1.8 QDTYL1.8-2 QDTYL1.8ARE QDTYL1.8-2ARE QDWSL2.0 QDWSL2.0ARE QDSL2.0 QDSL2.0ARE QDTYL2.0 QDTYL2.0ARE QDWSL2.5 QDWSL2.5ARE QDSL2.5 QDSL2.5ARE QDTYL2.5 QDTYL2.5ARE QDWSL3.0 QDWSL3.0ARE QDSL3.0 QDSL3.0ARE QDTYL3.0 QDTYL3.0ARE QDWSL3.5 QDWSL3.5ARE QDSL3.5 QDSL3.5ARE QDTYL3.5 QDTYL3.5ARE QDWSL4.0 QDWSL4.0ARE QDSL4.0 QDSL4.0ARE QDTYL4.0 QDTYL4.0ARE P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 21 Features • All Submersible Heaters are 2” diameter standard. • ** Submersible Heater is hard wire only. QUICKPLUG TM Submersible Heating System w/ Digital Control, Heater, and Sensor 304SS L Model No. 316SS L Model No. Titanium L Model No. Watts Volts Overall Length (in/mm) QDSUBWS1.0 QDSUBWS1.0-2 QDSUBS1.0 QDSUBS1.0-2 QDSUBTYS1.0 QDSUBTY1.0-2 1000 120 240 12 / 305 QDSUBWS1.5 QDSUBWS1.5-2 QDSUBS1.5 QDSUBS1.5-2 QDSUBTY1.5 QDSUBTY1.5-2 1500 120 240 16 / 406 QDSUBWS1.8 QDSUBWS1.8-2 QDSUBS1.8 QDSUBS1.8-2 QDSUBTY1.8 QDSUBTY1.8-2 1800 120 240 16 / 406 QDSUBWS2.0 QDSUBS2.0 QDSUBTY2.0 2000 240 16 / 406 26 / 660 QDSUBWS3.0 QDSUBS3.0 QDSUBTY3.0 3000 240 QDSUBWS4.0** QDSUBS4.0** QDSUBTY4.0** 4000 240 32 / 813 QDSUBWS6.0** QDSUBS6.0** QDSUBTY6.0** 6000 240 43 / 1092 Features • ** Submersible Heater is hard wire only. • QUICKPLUG™ systems and replacement heaters are 1 Phase. • All Submersible Heaters are 2” diameter standard. • 120V systems come with 5-15P wall plug. 240V systems come with 6-20P wall plug. QUICKPLUGTM Replacement Submersible Heater 304SS System Submersible 304SS Heater Submersible 316SS System Submersible 316SS Heater Submersible Titanium System Submersible Titanium Heater Submersible QDSUBWS1.0 QDSUBWS1.0-2 QDSUBWS1.0ARE QDSUBWS1.0-2ARE QDSUBS1.0 QDSUBS1.0-2 QDSUBS1.0ARE QDSUBS1.0-2ARE QDSUBTYS1.0 QDSUBTY1.0-2 QDSUBTYS1.0ARE QDSUBTY1.0-2ARE QDSUBWS1.5 QDSUBWS1.5-2 QDSUBWS1.5ARE QDSUBWS1.5-2ARE QDSUBS1.5 QDSUBS1.5-2 QDSUBS1.5ARE QDSUBS1.5-2ARE QDSUBTY1.5 QDSUBTY1.5-2 QDSUBTY1.5ARE QDSUBTY1.5-2ARE QDSUBWS1.8 QDSUBWS1.8-2 QDSUBWS1.8ARE QDSUBWS1.8-2ARE QDSUBS1.8 QDSUBS1.8-2 QDSUBS1.8ARE QDSUBS1.8-2ARE QDSUBTY1.8 QDSUBTY1.8-2 QDSUBTY1.8ARE QDSUBTY1.8-2ARE QDSUBWS2.0 QDSUBWS2.0ARE QDSUBS2.0 QDSUBS2.0ARE QDSUBTY2.0 QDSUBTY2.0ARE QDSUBWS3.0 QDSUBWS3.0ARE QDSUBS3.0 QDSUBS3.0ARE QDSUBTY3.0 QDSUBTY3.0ARE QDSUBWS4.0** QDSUBWS4.0ARE** QDSUBS4.0** QDSUBS4.0ARE** QDSUBTY4.0** QDSUBTY4.0ARE** QDSUBWS6.0** QDSUBWS6.0ARE** QDSUBS6.0** QDSUBS6.0ARE** QDSUBTY6.0** QDSUBTY6.0ARE** Features • QUICKPLUG™ control comes standard with 8’ length power cord and receptacle for use with all NEW QUICKPLUG™ Series heaters. • Sensor length 10 Ft W/(FEP) SLEEVE Standard. • PTC Sensor available consult factory -58° to 302°F / 50° to 150°C. • Add $15, add - PTC to model number. Example: DRG20-PTC. QUICKPLUG TM Replacement Digital Indicating Temperature Control - All Controls Comes with Nema 4X Closure 22 Model No. Temperature Range Phase AMPS V Plug Type QD20-1-I -58° to 230°F / -50° to 110°C 1 Phase 20 120 5-15P QD20-1-II -58° to 230°F / -50° to 110°C I Phase 20 240 6-20P P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • Please note not all older style QUICKPLUG™ Systems used Plug and Receptacle. Confirm your system before ordering. Replacement Plug and Receptacle Model Replacement Plug and Receptacle QDP Replacement plug for QD Hetars - May be added to plugless heaters QDR Replacement receptacle for QD Controls - For Exsisting receptacles only Features • Non digital temperature controls. • All controls come with Nema 4X Closure. 95 Series Standard Base Unit Model Temperature Range Phase AMPS V Sensor w/ (FEP) Sleeve CRG95 70° to 240°F / 21° to 115.5°C 1 Phase 25 100 / 240 5.5ft CRG95N4X 70° to 240°F / 21° to 115.5°C I Phase 25 100 / 240 5.5ft Features • Non digital temperature controls. • All controls come with Nema 4X Closure. CRG95N4X Combination Controls Model Temperature Range Phase AMPS V Sensor w/ (FEP) Sleeve C95P1N4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 30 120 5.5ft C95P2N4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 30 240 5.5ft C95P4TN4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 30 480 5.5ft D95P1N4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 50 120 5.5ft D95P2N4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 50 240 5.5ft D95P4TN4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 50 480 5.5ft E95P2N4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 90 240 5.5ft E95P4TN4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 90 480 5.5ft F95P2N4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 150 240 5.5ft F95P4TN4X 70° to 240°F / 21° to 115.5°C 1 or 3 Phase 150 480 5.5ft P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 23 Features • All controls come with Nema 4X Closure. • Temperature Range -4° TO 752°F/-20° TO 400°C. • Sensor W/(FEP) Sleeve 10 Ft. 16 Series Digital Indicating Combination Controls Model No. Phase Max. Amps C16P1N4X-I 1 or 3 Phase C16P2N4X-I 1 or 3 Phase C16P4TN4X-I D16P1N4X-I D16P2N4X-I Max. Amps Volts 1 or 3 Phase 50 480 1 or 3 Phase 90 120 E16P2N4X-I 1 or 3 Phase 90 240 F16P2N4X-I 1 or 3 Phase 150 240 F16P4TN4X-I 1 or 3 Phase 150 480 Volts Model No. Phase 30 120 D16P4TN4X-I 30 240 E16P1N4X-I 1 or 3 Phase 30 480 1 or 3 Phase 30 120 1 or 3 Phase 30 240 Features • All controls come with Nema 4X Closure. 16 Series 1 Phase Digital Indicating Controls Model No. Temperature Range Phase Wiring Max. Amps Volts Sensor w/ (FEP) Sleeve DRG16P1N4X-1PH-I -4° to 752°F / -20° to 400°C 1 Phase Hard-wire only 15 120 10ft DRG16P2N4X-1PH-I -4° to 752°F / -20° to 400°C 1 Phase Hard-wire only 15 240 10ft C16P1N4X-1PH-I -4° to 752°F / -20° to 400°C 1 Phase Hard-wire only 30 120 10ft C16P2N4X-1PH-I -4° to 752°F / -20° to 400°C 1 Phase Hard-wire only 30 240 10ft D16P1N4X-1PH-I -4° to 752°F / -20° to 400°C 1 Phase Hard-wire only 30 120 10ft D16P2N4X-1PH-I -4° to 752°F / -20° to 400°C 1 Phase Hard-wire only 50 240 10ft Features • PTC Sensor available consult factory -58° TO 302°F/-50° to 150°C. • All controls come with Nema 4X Closure. • Add $15. Add –PTC to model number. Ex DRG20-PTC. Digital Indicating 20 Series Standard 24 Model No. Temperature Range Phase Wiring Max. Amps Volts Sensor w/ (FEP) Sleeve DRG20-I -58° to 230°F / -50° to 110°C 1 Phase Hard-wire only 20 120 / 240 10ft DRG20-P1-I -58° to 230°F / -50° to 110°C 1 Phase 15” AC Chord & Grommet 20 120 Plug 10ft DRG20-P2-I -58° to 230°F / -50° to 110°C 1 Phase 15” AC Chord & Grommet 20 240 Plug 10ft P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • All controls come with Nema 4X Closure. Digital Indicating DRG200 Standard Model No. Temperature Range Phase Max. Amps Volts Sensor w/ (FEP) Sleeve DRG200-1 -0° to 1100°F / -0° to 593°C 1 Phase 5 90 - 240 10ft Features • All controls come with Nema 4X Closure. Digital Indicating DRG200 Dual Acting (Heating and Cooling) Model No. Temperature Range Phase Max. Amps Volts Sensor w/ (FEP) Sleeve DRG200D-1 -0° to 1100°F / -0° to 593°C 1 Phase 5 90 - 240 10ft Features • All controls come with Nema 4X Closure. • 200 Series controller has more functions, a larger face, and greater accuracy. • Sensor W/(FEP) Sleeve 10 Ft. Digital Indicating DRG200 Combination Controls Model No. Phase Max. AMPS Volts Dual Acting Model No. Phase Max. AMPS Volts C200P1N4X-I 1 or 3 Phase 30 120 C200DP1N4X-I 1 or 3 Phase 30 120 C200P2N4X-I 1 or 3 Phase 30 240 C200DP2N4X-I 1 or 3 Phase 30 240 C200P4TN4X-I 1 or 3 Phase 30 480 C200DP4TN4X-I 1 or 3 Phase 30 480 D200P1N4X-I 1 or 3 Phase 50 120 D200DP1N4X-I 1 or 3 Phase 50 120 D200P2N4X-I 1 or 3 Phase 50 240 D200DP2N4X-I 1 or 3 Phase 50 240 D200P4TN4X-1 1 or 3 Phase 50 480 D200DP4TN4X-1 1 or 3 Phase 50 480 E200P2TN4X-1 1 or 3 Phase 90 240 E200DP2TN4X-1 1 or 3 Phase 90 240 E200P4TN4X-1 1 or 3 Phase 90 480 E200DP4TN4X-1 1 or 3 Phase 90 480 F200P2N4X-1 1 or 3 Phase 150 240 F200DP2TN4X-1 1 or 3 Phase 150 240 F200P4N4X-1 1 or 3 Phase 150 480 F200DP4TN4X-1 1 or 3 Phase 150 480 25 Seesaw Floatswitch 5AMP@240V Single Switch 10AMP@120V 5AMP@240V Dual Switch 10AMP@120V Polypro Titanium Range of Motion Polypro Titanium Range of Motion LP7 LT7 6-9in / 152-229mm LP7 LT7 6-9in / 152-229mm LP10 LT10 9-13in / 229-330mm LP10 LT10 9-13in / 229-330mm LP13 LT13 12-16in / 305-406mm LP13 LT13 12-16in / 305-406mm LP22 LT22 21-25in / 533-635mm LP22 LT22 21-25in / 533-635mm Single Switch 20AMP@120V/240V Polypro Titanium Range of Motion 6-9in / 152-229mm LT7 LP7 LP10 LT10 9-13in / 229-330mm LP13 LT13 12-16in / 305-406mm LP22 LT22 21-25in / 533-635mm CRG95 Mechanism Replacement for All 95 Series Model No. Temperature Range Phase Max. Amps Volts Sensor w/ (FEP) Sleeve M95 70° to 240°F / -21° to 115.5°C 1 Phase 25 120 / 240 5.5ft M16 Mechanism Replacement for All 16 Series Temperature Range Max. Amps Volts Sensor w/ (FEP) Sleeve M16 0° to 999°F / -0° to 537°C 5 100-240 None M16-s 0° to 999°F / -0° to 537°C with Sensor 5 100-240 10ft Model No. Features • Can be used with all Combination Controllers. Solid State Timer Model No. 26 Volts Switching Capacity ET-1 120 10 AMPS ET-2 240 10 AMPS P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Magnetic Contactor Model No. Coil Voltage AMPS Contacts Max. Contact Voltage CP2 240 30 3 All Modals 600 All Modals CP1 120 30 3 All Modals 600 All Modals DP2 240 50 3 All Modals 600 All Modals DP1 120 50 3 All Modals 600 All Modals EP2 240 90 3 All Modals 600 All Modals EP1 120 90 3 All Modals 600 All Modals FP2 240 150 3 All Modals 600 All Modals FP1 120 150 3 All Modals 600 All Modals Features • Safety protection offered in one-time fuse operation and resettable style fuse in various temperatures. (Consult Factory) Smart Heater Replacement Fuses Model No. Leadwire Description AMPS Option A 2 Red One-time fuse, temperature under 190°F 25 Option AH 2 White One-time fuse, temperature under 329°F 25 Option E 2 Blue Single bimetallic resetable assembly, temperature under 266°F 5 Option B 1 White, 1 Red, 1 Orange Dual bimetallic for alarm, resetable assembly temperature under 200°F 5 Features • For other fuse configurations. (Consult Factory) Smart Heater Replacement Grounded Fuses for Quartz & Teflon Style Heaters Model No. Leadwire Option AG Option AHG Description AMPS 2 Red, 1 Green One-time fuse, temperature under 190°F 25 2 Red, 1 Green One-time fuse, temperature under 329°F 25 Features • Add $2 for each additional foot in length above standard senor wire length. Extra length added to sensor wire only not to FEP sleeve. (Consult Factory) Sensors Model No. Digital Controls Sensor w/ (FEP) Sleeve SJ10 16 Series, 200 Series, 167 Series, 101 Series 10ft S50 DRG50, QD50 8ft S20 DRG20, QD20 10ft P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 27 Features • All $30 for set up fee on all orders under 12 units per order. • Minimum of 4 elements required. Quartz Infrared Radiant Elements - 24” Panel Elements Model No. Watts Volts Model No. Watts Volts E-524 500 115 E-1524 1500 115 AE-524 500 115 AE-1524 1500 115 E-724 750 115 E-524-2 500 230 AE-724 750 115 AE-524-2 500 230 E-1024 1000 115 E-724-2 750 230 AE-1024 1000 115 AE-724-2 750 230 E-1224 1250 115 E-1024-2 1000 230 AE-1224 1250 115 AE-1024-2 1000 230 Features • All $30 for set up fee on all orders under 12 units per order. • Minimum of 4 elements required. Quartz Infrared Radiant Elements - 36” Panel Elements 28 Model No. Walts Volts Model No. Watts Volts E-536 500 115 E-536-2 500 230 AE-536 500 115 AE-536-2 500 230 E-736 750 115 E-736-1 750 230 AE-736 750 115 AE-736-1 750 230 E-1036 1000 115 E-1036-2 1000 230 AE-1036 1000 115 AE-1036-2 1000 230 E-1236 1250 115 E-1236-2 1250 230 AE-1236 1250 115 AE-1236-2 1250 230 E-1536 1500 115 E-1536-2 1500 230 AE-1536 1500 115 AE-1536-2 1500 230 E-2036 2000 115 E-2036-2 2000 230 AE-2036 2000 230 AE-2036-2 2000 230 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • All $30 for set up fee on all orders under 12 units per order. • Minimum of 4 elements required. Quartz Infrared Radiant Elements - 48” Panel Elements Model No. Walts Volts Model No. Watts Volts E-548 500 115 E-748-1 750 230 AE-548 500 115 AE-748-1 750 230 E-748 750 115 E-1048-2 1000 230 AE-748 750 115 AE-1048-2 1000 230 E-1048 1000 115 E-1248-2 1250 230 AE-1048 1000 115 AE-1248-2 1250 230 E-1248 1250 115 E-1548-2 1500 230 AE-1248 1250 115 AE-1548-2 1500 230 E-1548 1500 115 E-2048-2 2000 230 AE-1548 1500 115 AE-2048-2 2000 230 E-2048 2000 115 E-2548-2 2500 230 AE-2048 2000 230 AE-2548-2 2500 230 E-548-2 500 230 E-3048-2 3000 230 AE-548-2 500 230 AE-3048-2 3000 230 Features • All $30 for set up fee on all orders under 12 units per order. • Minimum of 4 elements required. Quartz Infrared Radiant Elements - 60” Panel Elements Model No. Walts Volts Model No. Watts Volts E-1060 1000 115 E-1260-2 1250 230 AE-1060 1000 115 AE-1260-2 1250 230 E-1260 1250 115 E-1560-2 1500 230 AE-1260 1250 115 AE-1560-2 1500 230 E-1560 1500 115 E-2060-2 2000 230 AE-1560 1500 230 AE-2060-2 2000 230 E-2060 2000 230 E-2560-2 2500 230 AE-2060 2000 230 AE-2560-2 2500 230 E-1060 1000 230 E-3060-2 3000 230 AE-1060-2 1000 230 AE-3060-2 3000 230 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 29 Features • Entire exchanger is active exchange area. • Leak free design provides long life. • Compact low profile design. • Mounting hangers available. • High 100 PSI pressure rating (Custom higher pressure ratings available.Consult factory for addtional information). • Custom risers available. • Horizontal or vertical designs available. • Unlimited sizes available (Standard 4.6 sq. ft. to 89.8 sq. ft. of exchange area). The SRG Series Exchanger offer superior performance for use in heating and cooling applications and can be used in salt water, alkaline solutions and plating rinse tanks. Rugged construction with heavy gauge material in 316 stainless steel, titanium, zirconium or mild steel allows for long uninterrupted life. Fluoropolymer coating is available for corrosion protection at solution interface. Precision inlet and outlet manifolds enable single point connections that reduce potential for leaks while simplifying installation. Always consult your chemical supplier for proper sheathing material compatibility. Single Round Grid Coils SRG - 12-1/2” Width Area (sq ft) Weight (lbs/kg) 24 / 610 4.6 13 / 6 14 / 6.5 Model No. # Tubes Depth (in/mm) Length (in/mm) 8SRG-24 8 12.5 / 318 8SRG-30 8 12.5 / 318 30 / 762 5.6 8SRG-36 8 12.5 / 318 36 / 915 6.7 15 / 7 8SRG-48 8 12.5 / 318 48 / 1219 8.8 18 / 8 8SRG-60 8 12.5 / 318 60 / 1524 10.9 20 / 9 8SRG-72 8 12.5 / 318 72 / 1829 13.7 25 / 11.5 8SRG-84 8 12.5 / 318 84 / 2134 15.1 30 / 13.5 8SRG-96 8 12.5 / 318 96 / 2439 17.2 35 / 16 8SRG-108 8 12.5 / 318 108 / 2743 19.2 38 / 17 8SRG-120 8 12.5 / 318 120 / 3048 21.3 42 / 19 8SRG-132 8 12.5 / 318 132 / 3353 23.4 45 / 20.5 8SRG-144 8 12.5 / 318 144 / 3658 25.5 50 / 22.5 Area (sq ft) Weight (lbs/kg) Single Round Grid Coils SRG - 18-1/2” Width 30 Model No. # Tubes Depth (in/mm) Length (in/mm) 12SRG-24 12 18.5 / 470 24 / 610 6.8 15 / 7 12SRG-30 12 18.5 / 470 30 / 762 8.4 18 / 8 12SRG-36 12 18.5 / 470 36 / 915 10 22 / 10 12SRG-48 12 18.5 / 470 48 / 1219 13.2 28 / 13 12SRG-60 12 18.5 / 470 60 / 1524 16.3 35 / 16 12SRG-72 12 18.5 / 470 72 / 1829 19.5 45 / 20.5 12SRG-84 12 18.5 / 470 84 / 2134 22.6 50 / 22.5 12SRG-96 12 18.5 / 470 96 / 2439 25.7 56 / 25.5 12SRG-108 12 18.5 / 470 108 / 2743 28.9 62 / 28 12SRG-120 12 18.5 / 470 120 / 3048 32 68 / 31 12SRG-132 12 18.5 / 470 132 / 3353 35.2 75 / 34 12SRG-144 12 18.5 / 470 144 / 3658 38.3 90 / 41 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • Entire exchanger is active exchange area. • Leak free design provides long life. • Compact low profile design. • Mounting hangers available. • High 100 PSI pressure rating (Custom higher pressure ratings available.Consult factory for addtional information). • Custom risers available. • Horizontal or vertical designs available. • Unlimited sizes available (Standard 4.6 sq. ft. to 89.8 sq. ft. of exchange area). The SRG Series Exchanger offer superior performance for use in heating and cooling applications and can be used in salt water, alkaline solutions and plating rinse tanks. Rugged construction with heavy gauge material in 316 stainless steel, titanium, zirconium or mild steel allows for long uninterrupted life. Fluoropolymer coating is available for corrosion protection at solution interface. Precision inlet and outlet manifolds enable single point connections that reduce potential for leaks while simplifying installation. Always consult your chemical supplier for proper sheathing material compatibility. Single Round Grid Coils SRG - 24-1/2” Width Length (in/mm) Model No. # Tubes Depth (in/mm) 24SRG-24 16 24.5 / 622 24 / 610 Area (sq ft) Weight (lbs/kg) 9.4 20 / 9 25 / 11.5 24SRG-30 16 24.5 / 622 30 / 762 11.5 24SRG-36 16 24.5 / 622 36 / 915 13.5 29 / 13 24SRG-48 16 24.5 / 622 48 / 1219 17.8 35 / 15/5 24SRG-60 16 24.5 / 622 60 / 1524 22 43 / 19.5 24SRG-72 16 24.5 / 622 72 / 1829 26.1 50 / 22.5 24SRG-84 16 24.5 / 622 84 / 2134 30.3 62 / 28 24SRG-96 16 24.5 / 622 96 / 2439 34.5 70 / 32 24SRG-108 16 24.5 / 622 108 / 2743 38.7 80 / 36 88 / 40 24SRG-120 16 24.5 / 622 120 / 3048 42.9 24SRG-132 16 24.5 / 622 132 / 3353 47 97 / 44 24SRG-144 16 24.5 / 622 144 / 3658 51.3 105 / 47.5 h t d iW ” 2 / 1 - 0 3 - G R S s l i o C d i r G d n u o R e l g n i S Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) Weight (lbs/kg) 23 / 10.5 30SRG-24 20 30.5 / 775 24 / 610 11.5 30SRG-30 20 30.5 / 775 30 / 762 14.2 28 / 13 30SRG-36 20 30.5 / 775 36 / 915 16.8 34 / 15/5 30SRG-48 20 30.5 / 775 48 / 1219 22 40 / 18 30SRG-60 20 30.5 / 775 60 / 1524 27.2 48 / 22 30SRG-72 20 30.5 / 775 72 / 1829 32.5 55 / 25 30SRG-84 20 30.5 / 775 84 / 2134 37.7 68 / 31 30SRG-96 20 30.5 / 775 96 / 2439 42.9 75 / 34 30SRG-108 20 30.5 / 775 108 / 2743 48.2 87 / 39.5 30SRG-120 20 30.5 / 775 120 / 3048 53.4 100 / 45/5 30SRG-132 20 30.5 / 775 132 / 3353 58.5 115 / 52 30SRG-144 20 30.5 / 775 144 / 3658 63.9 125 / 57 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 31 Features • Entire exchanger is active exchange area. • Leak free design provides long life. • Compact low profile design. • Mounting hangers available. • High 100 PSI pressure rating (Custom higher pressure ratings available.Consult factory for addtional information). • Custom risers available. • Horizontal or vertical designs available. • Unlimited sizes available (Standard 4.6 sq. ft. to 89.8 sq. ft. of exchange area). The SRG Series Exchanger offer superior performance for use in heating and cooling applications and can be used in salt water, alkaline solutions and plating rinse tanks. Rugged construction with heavy gauge material in 316 stainless steel, titanium, zirconium or mild steel allows for long uninterrupted life. Fluoropolymer coating is available for corrosion protection at solution interface. Precision inlet and outlet manifolds enable single point connections that reduce potential for leaks while simplifying installation. Always consult your chemical supplier for proper sheathing material compatibility. Single Round Grid Coils SRG - 36-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) Weight (lbs/kg) 36SRG-24 24 36.5 / 927 24 / 610 13.7 38 / 17 36SRG-30 24 36.5 / 927 30 / 762 16.8 42 / 19 36SRG-36 24 36.5 / 927 36 / 915 20 45 / 20.5 36SRG-48 24 36.5 / 927 48 / 1219 26.3 50 / 22.5 36SRG-60 24 36.5 / 927 60 / 1524 32.5 57 / 26 36SRG-72 24 36.5 / 927 72 / 1829 38.8 65 / 29.5 36SRG-84 24 36.5 / 927 84 / 2134 45.1 75 / 35 36SRG-96 24 36.5 / 927 96 / 2439 51.4 85 / 38.5 36SRG-108 24 36.5 / 927 108 / 2743 57.7 100 / 45.5 36SRG-120 24 36.5 / 927 120 / 3048 64 115 / 52 36SRG-132 24 36.5 / 927 132 / 3353 70.3 130 / 59 36SRG-144 24 36.5 / 927 144 / 3658 76.6 150 / 68 Area (sq ft) Weight (lbs/kg) 15.8 40 / 18 Single Round Grid Coils SRG - 48-1/2” Width 32 Length (in/mm) Model No. # Tubes Depth (in/mm) 48SRG-24 28 42.5 / 1080 24 / 610 48SRG-30 28 42.5 / 1080 30 / 762 19.5 45 / 20.5 48SRG-36 28 42.5 / 1080 36 / 915 23.2 50 / 22.5 48SRG-48 28 42.5 / 1080 48 / 1219 30.6 58 / 26.5 48SRG-60 28 42.5 / 1080 60 / 1524 38 65 / 29.5 48SRG-72 28 42.5 / 1080 72 / 1829 45.4 75 / 34 48SRG-84 28 42.5 / 1080 84 / 2134 52.8 85 / 38.5 48SRG-96 28 42.5 / 1080 96 / 2439 60.2 100 / 45.5 48SRG-108 28 42.5 / 1080 108 / 2743 67.6 115 / 52 48SRG-120 28 42.5 / 1080 120 / 3048 75 130 / 59 48SRG-132 28 42.5 / 1080 132 / 3353 82.4 150 / 68 48SRG-144 28 42.5 / 1080 144 / 3658 89.8 175 / 79.5 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Features • Entire exchanger is active exchange area. • Leak free design provides long life. • Compact low profile design. • Mounting hangers available. • High 100 PSI pressure rating (Custom higher pressure ratings available.Consult factory for addtional information). • Custom risers available. • Horizontal or vertical designs available. • Unlimited sizes available (Standard 5.9 sq. ft. to 140.0 sq. ft. of exchange area). This dual footprint design offers superior performance for use in heating and cooling applications where space is an issue. These dual format round tube grids require a substantially smaller footprint to adequately heat or cool a given exchange area. Rugged construction with heavy gauge material in 316 stainless steel, titanium, zirconium or mild steel allows for long uninterrupted life. Fluoropolymer coating is available for corrosion protection at solution interface. Precision inlet and outlet manifolds enable single point connections that reduce potential for leaks while simplifying installation. Always consult your chemical supplier for proper sheathing material compatibility. Double Round Grid Coils DRG - 12-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 16DRG-14 16 12.5 / 318 14 / 355 16DRG-18 16 12.5 / 318 18 / 457 6.1 16DRG-24 16 12.5 / 318 24 / 609 8.2 16DRG-30 16 12.5 / 318 30 / 762 10.3 4.9 16DRG-36 16 12.5 / 318 36 / 914 12.4 16DRG-48 16 12.5 / 318 48 / 1219 16.6 16DRG-60 16 12.5 / 318 60 / 1524 20.8 Double Round Grid Coils DRG - 18-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 24DRG-18 24 18.5 / 470 18 / 457 9.2 24DRG-24 24 18.5 / 470 24 / 609 12.4 24DRG-30 24 18.5 / 470 30 / 762 15.5 24DRG-36 24 18.5 / 470 36 / 914 18.6 24DRG-48 24 18.5 / 470 48 / 1219 25 24DRG-60 24 18.5 / 470 60 / 1524 31 24DRG-74 24 18.5 / 470 74 / 1879 38.6 htdiW ”2/1-42 - GRD slio C dirG dnuoR elbuo D Length (in/mm) Model No. # Tubes Depth (in/mm) 32DRG-24 32 24.5 / 622 24 / 609 Area (sq ft) 16.6 32DRG-30 32 24.5 / 622 30 / 762 20.7 32DRG-36 32 24.5 / 622 36 / 914 24.9 32DRG-48 32 24.5 / 622 48 / 1219 33 32DRG-60 32 24.5 / 622 60 / 1524 41.7 32DRG-74 32 24.5 / 622 74 / 1879 55.6 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 33 Features • Entire exchanger is active exchange area. • Leak free design provides long life. • Compact low profile design. • Mounting hangers available. • High 100 PSI pressure rating (Custom higher pressure ratings available.Consult factory for addtional information). • Custom risers available. • Horizontal or vertical designs available. • Unlimited sizes available (Standard 5.9 sq. ft. to 140.0 sq. ft. of exchange area). This dual footprint design offers superior performance for use in heating and cooling applications where space is an issue. These dual format round tube grids require a substantially smaller footprint to adequately heat or cool a given exchange area. Rugged construction with heavy gauge material in 316 stainless steel, titanium, zirconium or mild steel allows for long uninterrupted life. Fluoropolymer coating is available for corrosion protection at solution interface. Precision inlet and outlet manifolds enable single point connections that reduce potential for leaks while simplifying installation. Always consult your chemical supplier for proper sheathing material compatibility. Double Round Grid Coils DRG - 30-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 40DRG-30 40 30.5 / 755 30 / 762 40DRG-36 40 30.5 / 755 36 / 914 31 40DRG-48 40 30.5 / 755 48 / 1219 41.7 40DRG-60 40 30.5 / 755 60 / 1524 52 40DRG-74 40 30.5 / 755 74 / 1879 64 25.9 Double Round Grid Coils DRG - 36-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 48DRG-36 48 36.5 / 927 36 / 914 37.4 48DRG-48 48 36.5 / 927 48 / 1219 50 48DRG-60 48 36.5 / 927 60 / 1524 62.6 48DRG-74 48 36.5 / 927 74 / 1879 77 Double Round Grid Coils DRG - 48-1/2” Width 34 Length (in/mm) Area (sq ft) Model No. # Tubes Depth (in/mm) 56DRG-48 56 48.5 / 1080 48 / 1219 56DRG-60 56 48.5 / 1080 60 / 1524 73 56DRG-74 56 48.5 / 1080 74 / 1879 90 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 58 Features • Entire exchanger is active exchange area. • Leak free design provides long life. • Compact low profile design. • Mounting hangers available. • High 100 PSI pressure rating (Custom higher pressure ratings available.Consult factory for addtional information). • Custom risers available. • Horizontal or vertical designs available. • Unlimited sizes available (Standard 6.58 sq. ft. to 185.5 sq. ft. of exchange area). These unique C-shape tube grids require a substantially smaller footprint to adequately heat or cool a given exchange area. They can be used in salt water, alkaline solutions and plating rinse tanks. Rugged construction with heavy gauge material in 316 stainless steel, titanium, zirconium or mild steel allows for long uninterrupted life. Fluoropolymer coating is available for corrosion protection at solution interface. Precision inlet and outlet manifolds enable single point connections that reduce potential for leaks while simplifying installation. Always consult your chemical supplier for proper sheathing material compatibility. Double C Style Grid Coils DCG - 12-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 26DCG-14 26 12.5 / 318 14 / 355 6.58 26DCG-18 26 12.5 / 318 18 / 457 8.8 26DCG-24 26 12.5 / 318 24 / 609 12 15.6 26DCG-30 26 12.5 / 318 30 / 762 26DCG-36 26 12.5 / 318 36 / 914 19 26DCG-48 26 12.5 / 318 48 / 1219 25.8 26DCG-54 26 12.5 / 318 54 / 1371 29 26DCG-64 26 12.5 / 318 64 / 1625 34.9 Double C Style Grid Coils DCG - 18-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) 38DCG-18 38 18.5 / 470 18 / 457 Area (sq ft) 13 38DCG-24 38 18.5 / 470 24 / 609 18 38DCG-30 38 18.5 / 470 30 / 762 23 38DCG-36 38 18.5 / 470 36 / 914 27.9 38DCG-48 38 18.5 / 470 48 / 1219 35 42.9 38DCG-54 38 18.5 / 470 54 / 1371 38DCG-64 38 18.5 / 470 64 / 1625 51 38DCG-74 38 18.5 / 470 74 / 1879 59.5 Double C Style Grid Coils DCG - 24-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 52DCG-24 52 24.5 / 622 24 / 609 52DCG-30 52 24.5 / 622 30 / 762 31 52DCG-36 52 24.5 / 622 36 / 914 38 52DCG-48 52 24.5 / 622 48 / 1219 51.8 52DCG-54 52 24.5 / 622 54 / 1371 58.6 52DCG-64 52 24.5 / 622 64 / 1625 70 52DCG-74 52 24.5 / 622 74 / 1879 81 24.6 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 35 Features • Entire exchanger is active exchange area. • Leak free design provides long life. • Compact low profile design. • Mounting hangers available. • High 100 PSI pressure rating (Custom higher pressure ratings available.Consult factory for addtional information). • Custom risers available. • Horizontal or vertical designs available. • Unlimited sizes available (Standard 6.58 sq. ft. to 185.5 sq. ft. of exchange area). These unique C-shape tube grids require a substantially smaller footprint to adequately heat or cool a given exchange area. They can be used in salt water, alkaline solutions and plating rinse tanks. Rugged construction with heavy gauge material in 316 stainless steel, titanium, zirconium or mild steel allows for long uninterrupted life. Fluoropolymer coating is available for corrosion protection at solution interface. Precision inlet and outlet manifolds enable single point connections that reduce potential for leaks while simplifying installation. Always consult your chemical supplier for proper sheathing material compatibility. Double C Style Grid Coils DCG - 30-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 64DCG-30 64 30.5 / 755 30 / 762 64DCG-36 64 30.5 / 755 36 / 914 47 64DCG-48 64 30.5 / 755 48 / 1219 63.9 38.8 64DCG-54 64 30.5 / 755 54 / 1371 72 64DCG-64 64 30.5 / 755 64 / 1625 86 64DCG-74 64 30.5 / 755 74 / 1879 100 64DCG-84 64 30.5 / 755 84 / 2134 114 Double C Style Grid Coils DCG - 36-1/2” Width Model No. # Tubes Depth (in/mm) Length (in/mm) Area (sq ft) 78DCG-36 78 36.5 / 927 36 / 914 57.4 78DCG-48 78 36.5 / 927 48 / 1219 77.8 78DCG-54 78 36.5 / 927 54 / 1371 88 78DCG-64 78 36.5 / 927 64 / 1625 105 78DCG-74 78 36.5 / 927 74 / 1879 122 78DCG-84 78 36.5 / 927 84 / 2134 139 Double C Style Grid Coils DCG - 48-1/2” Width 36 Length (in/mm) Area (sq ft) Model No. # Tubes Depth (in/mm) 104DCG-48 104 48.5 / 1080 48 / 1219 103.8 104DCG-54 104 48.5 / 1080 54 / 1371 117.4 104DCG-64 104 48.5 / 1080 64 / 1625 140 104DCG-74 104 48.5 / 1080 74 / 1879 162.8 104DCG-84 104 48.5 / 1080 84 / 2134 185.5 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs Control Amerpage Selector Control Sizing - Heating Load Amperage THREE PHASE BALANCE SINGLE PHASE Heater Wattage 120V 208V 240V 480V 208V 240V 480V 600V 500 4.2 2.4 2.1 1.1 1.4 1.2 0.6 0.5 1000 8.4 4.8 4.2 2.1 2.8 2.5 1.2 1.0 2000 1 6.7 9.7 8.4 4.2 5.6 4.9 2.5 1.9 3000 25.0 14.5 12.5 6.3 8.4 7.3 3.7 2.9 4000 33.4 1 9.3 1 6.7 8.4 11.2 9.7 4.9 3.9 5000 41.7 24.0 20.8 10.4 14.0 12.1 6.0 4.8 6000 50.0 28.9 25.0 12.5 1 6.7 14.5 7.3 5.8 7000 58.3 33.7 29.2 14.6 1 9.5 1 6.9 8.4 6.7 8000 66.7 38.5 33.4 1 6.7 22.3 1 9.3 9.7 7.7 9000 75.0 43.3 37.5 1 8.8 25.1 21.7 10.9 8.7 10000 83.3 4 8.1 41.7 20.9 27.8 24.1 12.0 9.6 12000 100.0 57.7 50.0 25.0 33.4 29.0 14.5 11.6 1 5000 125.0 72.1 62.5 31.2 41.7 36.1 1 8.1 14.5 1 8000 1 50.0 86.6 75.0 37.5 50.1 43.4 21.7 17.3 21000 175.0 101.0 87.5 43.8 58.3 50.6 25.3 20.5 24000 200.0 11 5.4 100.0 50.0 66.7 57.8 28.9 23.0 27000 225.0 129.9 112.5 56.3 75.1 65.1 32.6 26.0 30000 250.0 144.2 125.0 62.5 83.3 72.3 36.1 28.9 36000 300.0 173.1 1 50.0 75.0 100.1 86.8 43.3 34.7 Controls are determined by finding the amperage per line and multiplying by 1.25 factor. How to calculate control amerpage • For single phase or two wire power supplies to heaters. Example: Formula: Total capacity (watts) = AMP rating per pole 4000 watts = 16.67 Amps 240 volts Line voltage • For three phase or three wire power supplied (Delta or Wye connections) to heaters using a three-pole contactor. Example: Formula: Total capacity (watts) Line voltage x 1.73 = AMP rating per pole 4000 watts = 16.67 Amps 240 volts x 1.73 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 37 ELECTRIC HEATER SIZING INFORMATION Temperature Gallons This chart provides an easy reference to estimate the KW required to heat a tank. Heat losses from the surface of the solution and from the sides of the tank have been taken into account. Find the gallons at the left, move to the right of the column with the temperature at which you will be heating the solution. The number indicated here is the KW required to do the heating job. The KW figure assumes a heat-up period of six hours; for a twelve hour heat-up time simply divide the KW figure in half. 100 110 120 130 140 150 160 170 180 190 200 210 50 1 1 1 2 2 2 2 3 3 4 4 5 100 2 2 3 3 3 4 4 5 6 6 8 8 200 4 4 5 6 6 7 8 9 10 11 12 14 300 6 6 7 8 9 10 12 14 15 16 18 20 400 8 8 9 10 12 14 16 18 20 21 24 25 500 9 10 12 13 15 18 20 24 24 27 30 32 600 11 12 15 16 18 21 24 28 30 32 36 38 700 13 13 17 18 21 24 28 32 36 38 42 44 800 15 16 19 21 24 28 32 36 40 44 48 54 900 17 18 21 24 27 32 38 40 44 48 54 58 1000 18 21 24 27 30 36 40 44 48 54 58 64 To determine the heating requirement of a tank, first obtain the following information: 1. Total cubic feet of tank. (Multiply the inside dimensions of the tank - depth x width x length.) 2. Total gallons of solution. (Multiply by 7.48 the cubic feet of the tank occupied by the solution. If the solution is normally 6” below the top of the tank, allow this when figuring) 3. Average ambient (room) temperature at which the tank will be used. 4. Temperature level at which solution is to be held. 5. Heat up time desired. Ax1.0* x 8.35** x B FORMULA : = 3412 x C DxE = Add the results of both calculations. The total is the Kilowatt requirement of the tank. A = Total gallons of solution. B = Difference from ambient temperature and desired solution temperature. C = Desired heat-up time (hours). D = Heat loss of tank - refer to charts on following page. E = Square feet of top of tank (multiply length x width). * = Specific heat of water. Insert specific heat of you solution here. ** = Weight of water. Insert specific weight of your solution here. Surface loss from open hot water tank with mild air agitation or ventilation (120) FPM TANK TEMPT. TANK TEMPT. 80 .03 150 .51 85 .05 155 .58 .65 90 .07 160 95 .09 165 .73 100 .11 170 .83 105 .13 175 .95 110 .15 180 1.1 115 .18 185 1.3 120 .21 190 1.6 125 .25 195 2.35 130 .30 200 2.80 135 .35 205 3.25 140 .41 210 3.75 145 .45 Surface loss from open hot water tank TANK TEMPT. 80 SAMPLE PROBLEM Tank Specifications: Dimensions: 4’ deep x 3’ wide x 5’ long or 488 gallons Operating Temperature: 160°F Heat-up Time: 6 hours Assume tank heat up to be from room temperature (70°F to 160°F) 448 gallons x 1.0 x 8.35 x 90 3412 x 6 hours = 336672 20472 Surface Loss Calculation 15sq. ft. (surface area) x .34 (open tank surface loss factor) = 5KW Total KW needed = 16KW + 5KW = 21KW 38 TANK TEMPT. P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 85 .01 150 .27 155 .30 90 .02 160 .34 95 .04 165 .37 100 .05 170 .41 105 .065 175 .45 .50. 110 .09 180 115 .10 185 55 120 .12 190 .60 .66 125 .14 195 130 .16 200 .72 135 .18 205 .80 140 .21 210 .87 145 .24 215 .95 WARRANTY INFORMATION & STANDARD CONDITION OF SALE IGNITION SOURCE DELIVERY Always use a low liquid level safety device! Electric immersion heaters may ignite plastic tanks (such as poly-propylene and polyethylene). Delivery of goods to a common carrier shall constitue delivery to the purchaser and all the risk of loss or damage in transit shall be borne by the purchaser. Unless otherwise specifically provided, delivery of te apparatus hereunder shall be made F.O.B point of shipment. Shipping dates are approximate - and are based upon prompt receipt of all necessary information. Company reserves the right to make delivery in installments unless otherwise expressly staed. All such installments shall be separately invoiced and paid for when due without regard to subsequent deliveries. Delay in delivery of any installment shall not relieve the purchaser of its obligation to accpet remaining deliveries. The Company shall not be liable for delya due to causes beyond its reasonable control, such as acts of God, acts of the Purchaser, act of civil or military authority, priorities, fires, strikes, lockouts, floods, epidemics, quarantine restriction, war, riot, delays in transporation, car shortages and the inability due to causes beyong its reasonable control to obtain necessary labor, materials, or manufacturing facilities. In the event of any such delay, the date of delivery shall be extended for a period equal to the time lost by the reason of the delay. SHOCK HAZARD Beware of shock hazard! If an electric immersion heater is not properly installed it could pose a shock hazard to personnel. WARRANTY All CLEPCO equipment manufactured and sold by Intelligent Heater, LLC has been carefully inspected before shipping and subject to stringent quality control. CLEPCO products are warranted against defects in material and workmanship for a period of one year from date of shipment and are applied on a pro rate basis. As its option CLEPCO will repair or replace defective equipment. Intelligent Heater, LLC disclaims responsibility for failure arising from misuse, improper installation, negligence, tampering or other operating conditions beyond its control. Intelligent Heater, LLC is NOT liable for labor cost arising from removal, re-installation or unauthorized repair of the product or for damage of any type including incidental or consequential damage. The user is responsible for overall safety and operation of the equipment. We highly recommend the use of low liquid level protection systems and liquid level controls when the use of heaters is involved. The suitability of products to specific application is the final responsibility of the user. DAMAGES Upon receipt of merchandise inspect immediately for damages. Notify carrier promptly if equipment is damaged and keep all packaging for inspections. Do not reship back to Intelligent Heater, LLC claims against carrier for damages in transit must be filed by the buyer. CANCELLATION POLICY Intelligent Heater, LLC reserves the right to determine customer’s financial responsibility in case of order change or cancellation. A determination will be made by Intelligent Heater, LLC based on point of production. CREDIT Credit will be issued only after receipt and examination of return merchandise. Replacement merchandise will be sent out and invoice as a new order. Any credits due will be issued against the old invoice. RETURNS No products shall be returned to Intelligent Heater, LLC without first obtaining return authorization from the factory or one of its representatives. All returns must be freight prepaid. Frieght collect or shipment without proper authorization will be refused. All returns must be clearly marked on the outside of th carton with RMA number. Also include the invoice number covering the original purchase, model number if the equipment being returned as well as any instructions where applicable. All return items must be thoroughly cleaned and free of any chemicals. A material safety data sheet for the chemicals must accompany the heaters or they will be refused. PAYMENTS If in the judgement of the Company, the finincial condition of the Purchaser at any time does not justify continuance of production or shipment on the terms of payment specified, the Company may require full or partial payment in advance. Pro rata payments shall become due as shipments are made. If the shipments are delayed by the Purchaser payments shall become due from date when the Company is prepared to make shipment. If manufacturer is delayed by the Purchaser, payment shall be made based on the contract price and the percentage of completion. Apparatus held for the Purchaser shall be at the risk and expense of the Purchaser. GENERAL Any controversy, dispute or claim arsing out of or related to this contract or breech thereof shall be settled by arbitration held the Homestead, Florida in accordance with the rules of the American Arbitration Association, and judgment may be entered upon any award in the Court of Comoon Pleas and Miami-Dade County, Florida or in any other court in any state having jurisdiction. Any of the terms and provisions of the Purchaser’s order which are in any way inconsistent with these Standard Conditions of Sale or which are not expressly contained in this acknowledgement shall not be binding on the Company and shall not be considered applicable to this sale. In no event shall any claim for the consequential damages are made by either party. The Company will comply with all applicable Federal, State and local laws. No waiver, cancellation recession, alteration or modification of any of the provisions on the face or reverse hereof shall be binding unless in writing and signed by an executive officer of the Company or by the General Sales Manager of the Company. P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs 39 40 P l e a s e c o n s u l t f a cto r y fo r up to date G loba l S a fet y A ge n cy li sti n gs