1134800B CIA Faxon Machining-6

Transcription

1134800B CIA Faxon Machining-6
1134800B CIA Faxon Machining-6
7/8/11
8:54 AM
Page 3
LATE MODEL CNC MACHINING EQUIPMENT
BY MAKINO, OKUMA, MAZAK, HAAS AND
OTHER AUTOMOTIVE MANUFACTURING EQUIPMENT
NEW
2001
To
Se
lec
Be
co S t Ite
m ee
e a In ms
Qu stru To B
ali ct e O
fie ion ff
d s o ere
Bi
dd n P d O
er ag nli
on e 3 ne
th
eI
nt
er
ne
t
Featuring: (2) Makino A71 CNC HMC’s Loaded w/ Options (2003),
Makino FMS System w/ (3) Makino A88 CNC HMC’s and WSS 8-Pallet
Robot System (2001), 60” Monarch Two- Pallet CNC VTL (1996),
(2) Michigan Tool Co. Roto-Flow Spline Rollers, Mazak OT-10 & QT-20
CNC Turning Centers, (4) Mazak H-400 CNC HMC’s, HAAS VF-4 & VF-3
CNC VMC’s, (2) HAAS HMC’s. (3) Shigiya GPS-30 CNC Cylindrical
Grinders (2000), Mitsubishi RD-23-11 CNC Angle Head Grinder (1995),
Miroku MEG-1000 CNC Gun Drill, (3) Hardinge Conquest VT-200 CNC
VTC’s, Gardener Denver Disc Grinder, Misc. Machinery and
Automotive Manufacturing Equipment
SURPLUS TO THE ONGOING OPERATIONS OF
Overall View Makino A88 (3) Machine FMS Cell w/ 8-Pallet Robotic
Loading System
FAXON MACHINING, INC.
11101 Adwood Drive – Cincinnati, Ohio 45240
20 Miles Northeast of Downtown off I-275
NEW
2002/2003
SALE DATE:
Thursday,
August 11th
Starting at 1:00 PM
INSPECTION:
Wed., August 10th
10:00 AM to 4:00 PM
(2) Makino Model A71 Four-Axis Two-Pallet CNC Horizontal Machining
Centers
www.cia-a
uction.com
Feature
s:
Upcoming
Sale Inform
ation
Liquidation
& Equipmen
t Section
Email Auct
ion Notifica
tion
Recent Auct
ion Results
Lot Catalog
Listings
Photo Galle
ries
Downloada
ble Forms
Complete Te
rms of Sale
Staff Profile
s
Reference
Informatio
n
NEW
2000
NEW
11/1996
60” Monarch Model VLN-14 67X63.6 Two-Pallet CNC VTL
11.8” X 23.6” Shigiya Model GPS-30.60 CNC
Cylindrical Grinder
Mazak Model HTC-400 Two-Pallet CNC
Horizontal Machining Center
Miroku Model MEG-1000NC CNC Knee Type
Gun Drill
Michigan Tool Model 4085 Roto-Flo Spline
Rolling Machine
SALE UNDER THE MANAGEMENT OF
Cincinnati Industrial Auctioneers Inc.
2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760
INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding
1134800B CIA Faxon Machining-6
7/8/11
8:54 AM
Page 4
THURSDAY, AUGUST 11TH
NEW
2001
Overall View Makino A88 (3) Machine FMS Cell w/ 8-Pallet Robotic Loading System
NEW
11/1996
Makino Model WSS Eight-Pallet Robotic Pallet Loading
System
CNC VTL
60” Monarch Model VLN-14 67X63.6 Two-Pallet CNC
VTL; S/N T-53088NC, Fanuc 15TT CNC Control, (2) 57” Dia. 4Jaw Chucks, 5-Pos. Turret Head, CNC Side Head, 67” Max.
Swing, 66.1” Max. Height Under Cross Rail, 59.3” Max. Turning
Diameter With Side Head, 10.5” Min. Turning Diameter With Side
Head, 30” Vertical Travel, 63.6” Horizontal Travel, Chuck Speeds:
2.7 - 88 Rpm Low, 9.8 - 235 Rpm High, 75 HP Main Drive Motor,
Offload Pallet Station, Set Up Pallet Station, Hydraulic System,
Coolant System, Chip Conveyor (New 11/1996) SEE PHOTO
(3) MAKINO A88 HMC FMS CELL
Cell Will Be Sold Separate and Overall, Highest Bids or
Bid to Prevail
(3) Makino Model A88E Four-Axis Two-Pallet CNC
Horizontal Machining Centers; S/N 01-274, 01-273, 01-285,
Makino Professional 3 Control, 24-3/4” X 24-3/4” T-Slotted Pallets,
Full 4th Axis .001 Degree Pallet Rotation, 31” X-Axis, 29” Y-Axis,
31” Z-Axis, No. 50 Taper Spindle, Spindle Speeds to 10,000 RPM,
90-Position ATC, Thru Spindle Coolant, Balcrank Cutting Edge
Systems Coolant System w/ Twin Micron Filters, Chip Conveyor,
Kento Seiki Oilmatic Oil Temperature Controller, SMC Air Dryer,
Mist Buster II Mist Collector (New 2001)
SEE PHOTO
60” Monarch Model VLN-14 67X63.6 Two-Pallet CNC VTL
NEW
2002/2003
(2) Makino Model A71 Four-Axis Two-Pallet CNC Horizontal Machining Centers
Makino Model WSS Eight-Pallet Robotic Pallet Loading
System; (8) Pallet Storage Positions or Stations, (2) Pallet Loader
Stations set up for 24-3/4” X 24-3/4” Pallets and (3) Machine Cell
Various Views Makino A71 CNC HMC’s
1134800B CIA Faxon Machining-6
7/8/11
8:54 AM
Page 5
FAXON MACHINING, INC.
LOW
HOURS
NEW
2001
Miroku Model MEG-1000NC CNC Knee Type Gun Drill
NEW
1996
(3) Makino Model A88E Four-Axis Two-Pallet CNC Horizontal Machining Centers
MAKINO A71 CNC HMC’S
(2) Makino Model A71 Four-Axis Two-Pallet
CNC Horizontal Machining Centers; S/N 03-92 &
02-18, Makino Pro 3 Control, (2) 19-3/4” X 19-3/4” TSlotted Pallets, Full 4th Axis .001 Degree Pallet Rotation,
28” X-Axis, 28” Y-Axis, 31” Z-Axis, Spindle Speeds to
10,000 RPM, 60-Position ATC, No. 50 Taper Spindle,
High Pressure Coolant Thru Spindle, Chip Conveyor,
Oilmatic Automatic Oil Temperature Controller, Micron
Oil Filter System, Air Dryer (New 2002/2003)
SEE PHOTO
CNC GUN DRILL
Miroku Model MEG-1000NC CNC Knee Type
Gun Drill; S/N MS413, Fanuc O Series CNC Control,
54” X 34” T-Slotted Table, 1” Dia. Capacity, 60” Stroke,
(2) Work Rest Supports, Coolant System w/ Tanks, Filters
and 10 HP Pump, Appears to be very Low Hour Machine
(New 1993)
SEE PHOTO
MAZAK CNC HMC’S
Mazak Model HTC-400 Two-Pallet CNC
Horizontal Machining Center; S/N 121314, Mazak
Mazatrol M Plus Control, 15-3/4” X 15-3/4” T-Slotted
Pallets, Full 4th Axis .001 Degree Pallet Rotation, 22” XAxis, 20” Y-Axis, 20” Z-Axis, Spindle Speeds to 10,000
RPM, No. 40 Taper Spindle, Coolant Thru Spindle, Chip
Conveyor (New 5/1996)
SEE PHOTO
(2) Mazak Model H-400N / AL Two-Pallet CNC
Horizontal Machining Centers; S/N 110127
(2/1994) & S/N 116933 (6/1995), Mazatrol M-32
Control, 15-3/4” X 15-3/4” T-Slotted Pallets, Full 4th Axis
.001 Degree Pallet Rotation, 22.1” X-Axis, 20” Y-Axis, 20”
Z-Axis, No. 40 Taper Spindle, Coolant Thru Spindle,
High Pressure Overhead Flood Coolant, Chip Conveyor
(New 1994/1995)
SEE PHOTO
Mazak Model HTC-400 Two-Pallet CNC Horizontal Machining
Center
NEW
1994/1995
HAAS CNC HMC
Haas Model HS-1 Two-Pallet CNC Horizontal
Machining Center; S/N 50200, Haas CNC Control, (2)
16” X 16” Drilled and Tapped Pallets, No. 40 Taper
Spindle, 24-Pos. Automatic Tool Changer, 15 HP High
Torque Spindle, 710 IPM Brushless Servo Drives, Chip
Conveyor, Coolant System (New 1996) SEE PHOTO
WEBCAST BIDDER INSTRUCTIONS
➢ All Internet bidders must register for this auction
at www.bidspotter.com at least 48-Hours Prior
to the Sale Date, if you do not you will not be
approved.
➢ All Internet bidders must Post a Deposit of Approx.
25% of Your Planned Spending Budget or $5,000
Minimum with Cincinnati Industrial Auctioneers in
Order to be approved to Bid. Those who do Not
Post the Deposit Will Not be Approved. Period.
PLEASE READ THE IMPORTANT
AUCTION INFORMATION BOX
ON PAGE 5
(2) Mazak Model H-400N / AL
Two-Pallet CNC Horizontal
Machining Centers
NEW
1996
➢ Only Major Items Will be Available for
Online Bidding. Please refer to the Listing on
www.bidspotter.com for Available Online Items.
➢ There is a 15% Buyer’s Premium in Effect for All
Online Purchases.
➢ We Highly Recommend that Potential Buyers
Attend this Auction & Bid Live Onsite. This will
give you the Ability to Inspect the Items & Fully
Appreciate Their Condition, Along with Saving
You 3% of the Buyer’s Premium.
No Last Minute Registrations will be accepted. Make
Sure to Register & Post Your Deposit No Later than
48-Hours Prior to the Start of the Auction.
Haas Model HS-1 Two-Pallet CNC
Horizontal Machining Center
Haas Model VF-4 Three Axis CNC Vertical Machining Center
1134800B CIA Faxon Machining-6
7/8/11
8:54 AM
Page 6
THURSDAY, AUGUST 11TH
NEW
2000
11.8” X 23.6” Shigiya Model GPS-30.60 CNC
Cylindrical Grinder
CNC GRINDERS
11.8” X 23.6” Shigiya Model GPS-30.60 CNC
Cylindrical Grinder; S/N 100187, Fanuc Powermate
Control, Marpross In Process Gauging, 11.8” Swing, 23.6”
Max. Bet. Centers, 16” Max. Grinding Wheel Dia., 7.5 HP
Drive Motor, Coolant System, Torit Dry-Off Mist Collection
System (New 7/2000)
SEE PHOTO
11.8” X 14.6” Shigiya Model GPS-30.40 CNC
Cylindrical Grinder; S/N 09062, Fanuc Powermate
Control, Marpross In Process Gauging, 11.8” Swing, 14.6”
Max. Bet. Centers, 16” Max. Grinding Wheel Dia., 7.5 HP
Drive Motor, Coolant System, Torit Dry-Off Mist Collection
System (New 1999)
SEE PHOTO
9.1” X 13.8” Mitsubishi Model RD23-H-35A Angle
Head CNC Cylindrical Grinder; S/N N/A, Fanuc 18-T
Control, Marpross In Process Gauge, 9.1” Max Swing, 13.8”
Max Bet. Centers, 16” X 5” Bore X 50 MM Wide Grinding
Wheel Size, Coolant System (New 8/1995)
SEE PHOTO
CNC TURNING CENTERS
Okuma Model LU-15 Four-Axis Two-Turret CNC
Turning Center; S/N 1247, Okuma OSP-7000L Control,
20.87” Swing Over Bed, 14.96” Swing Over Cross Slide,
23.62” Between Centers, 14.17” Max Turning Dia., 10.24” /
5.51” X-Axis (Upper/Lower), 25.20” / 24.21” Z-Axis
(Upper/Lower), 2.44” Spindle Bore, 75 - 4500 RPM, 12Position Top & 8-Position Bottom Turrets, Sub Spindle, Chip
Conveyor, Coolant - Currently Out Of Service, Lower Turret
Needs Repair (New 1998)
SEE PHOTO
Mazak Quick Turn Model QT-20 CNC Turning
Center; S/N 124308, Mazak Mazatrol T Plus Control, 8”
Chuck, 20” Max. Swing, 11.8” Max. Cutting Diameter, 17.5”
Max Machining Length, 7.08” X-Axis, 21.1” Z-Axis, 8Position Turret, Tailstock, Coolant, Chip Conveyor (New
9/1996)
SEE PHOTO
Mazak Quick Turn Model QT-15N Univ CNC
Turning Center; S/N 113876, Mazatrol T-Plus CNC
Control, 8” Kitagawa Chuck, 18” Distance Between Centers,
17” Swing Over Bed, 10” Swing Over Cross Slide, 7.09” XAxis, 20.12” Z-Axis, 45-4500 RPM Spindle, 2.44” Hole Thru
Spindle, 8-Station Tool Turret, Chip Conveyor, Coolant
System, Tool Eye (New 1995)
SEE PHOTO
NEW
1999
NEW
1995
11.8” X 14.6” Shigiya Model GPS-30.40 CNC
Cylindrical Grinder
9.1” X 13.8” Mitsubishi Model RD23-H-35A Angle
Head CNC Cylindrical Grinder
Mazak Quick Turn Model QT-10 CNC Turning
Center; S/N 421689, Mazatrol T-Plus Control, 6” Kitagawa
Chuck, 8-Pos. Turret, Tailstock, Chip Conveyor, Tool Arm,
Coolant (New 1996)
SEE PHOTO
NEW
1998
Wasino Model G07-M Three-Axis Gang Tool CNC
Lathe; S/N 1024, Fanuc 21i-TB CNC Control, (2) Live
Spindles (1) Straight & (1) Right Angle, 6-3/4” X 22-1/2” TSlotted Tool Mounting Area, Coolant, Low Hours (New
2004)
SEE PHOTO
CNC VERTICAL TURNING CENTERS
(2) Hardinge Model Conquest VT-200 / RV-200 CNC
Vertical Turning Centers; S/N VL214-2 VT-200, VL352-2,
Fanuc 18T CNC Control, 24” Approx. Swing, 7.94” X-Axis,
19.88” Z-Axis, 12-Pos. Turret, 18.5 KW / 22KW Spindle
Motor, Coolant, Chip Conveyor (New Approx. 1996)
SEE PHOTO
(2) Olofsson Model 2075E Twin-Spindle CNC
Vertical Turning Centers; S/N 14156 and 14157, Fanuc
Okuma Model LU-15 Four-Axis Two-Turret CNC
Turning Center
NEW
1996
LOW
HOURS
16T CNC Control, Single Station Turning Tool, Approx. 12”
Horizontal Travel, Approx. 18” Vertical Travel, 18.5 / 22 KW
Drive Motor, Coolant, Light Curtains, Push & Palm Buttons
(New 1997)
SEE PHOTO
Carcass of Hardinge VT-200
CNC VMC’S
Haas Model VF-4 Three Axis CNC Vertical
Machining Center; S/N 3466, Haas CNC Control, 18” X
52” T-Slotted Table, 50” X-Axis, 20” Y-Axis, 25” Z-Axis, No.
40 Taper Spindle, 20-Pos. ATC, 15 HP High Torque Spindle,
Chip Conveyor, Coolant System (New 1994) SEE PHOTO
Haas Model VF-3 Three-Axis CNC Vertical
Machining Center; S/N 2388, Haas CNC Control, 18” X
48” T-Slotted Table, 40” X-Axis, 20” Y-Axis, 25” Z-Axis, No.
40 Taper Spindle, Spindle Speeds to 7,500 RPM, 20-Pos.
Automatic Tool Changer, Coolant System (New 1993)
SEE PHOTO
NEW
1996
NEW
2004
Mazak Quick Turn Model QT-20 CNC Turning Center
NEW
1995
Mazak Quick Turn Model QT-15N Univ CNC Turning
Center
NEW
1996
(2) Hardinge Model Conquest
VT-200 / RV-200 CNC Vertical
Turning Centers
Wasino Model G07-M Three-Axis Gang Tool CNC Lathe
Mazak Quick Turn Model QT-10 CNC Turning
Center
1134800B CIA Faxon Machining-6
7/8/11
8:54 AM
Page 1
THURSDAY, AUGUST 11TH
Michigan Tool Model 4085 Roto-Flo Spline Rolling Machine
SPLINE ROLLING MACHINES
Michigan Tool Model 4085 Roto-Flo Spline Rolling
Machine; S/N 3251, 40 HP Hydraulic System, Push Button
Control
SEE PHOTO
Michigan Tool Model 3225 Roto-Flo Spline Rolling
Machine; S/N 3653, Reconditioned by Micromatic Textron, 15 HP
Hydraulic System, Push Button Control
SEE PHOTO
DOUBLE DISC GRINDER
Gardner Model SDG3-30 Double Disc Grinder; S/N 869-7,
(2) 40 HP Grinding Head, 30” Wheel Face, 4’ Belt Feed, PB
Control, Airtronics Gauging System
SEE PHOTO
➢ Henry Filters Model 150 MV-9 Coolant Filtration System
D.E. FACING & CENTERING MACHINES
Georg Fischer Type ZM-80 D.E. Facing and Centering
Machine; S/N 26532-20, Spindle Speeds 28 to 2360 RPM, Twin
Spindle, (2) Tool Rests, Front Parts Loader and Rear Unloading
Conveyor, Chip Conveyor, Coolant System, Pendant Push Button
Control (New 1999)
SEE PHOTO
Georg Fischer Type ZM-80 D.E. Facing and Centering
Machine; S/N 21814, Spindle Speeds 28 to 2360 RPM, Twin
Spindle, (2) Tool Rests, Chip Conveyor, Coolant System
CNC WIRE EDM
Mitsubishi Model DWC90SB CNC Wire Cut EDM; S/N
0095B108, 19” X 21” Table, Dielectric Fluid, Mitsubishi CNC
Control, Auto Wire Threading (New 1990)
SEE PHOTO
MISC. MACHINERY
25 Ton Eitel Model RP-25 C-Frame Hydraulic
Straightening Press; S/N 25170, 10” X 55” Bed Size
SEE PHOTO
18”/28” X 60” Whacheon Model VL-435 X 1500G Geared
Head Gap Bed Engine Lathe; S/N 8901-65, 18” Swing Over
Bed, 28” Swing In Gap, Inch Threading, Chasing Dial, PB Control,
Coolant, 5 HP Spindle Motor (New 1989)
Advance Hydrocat Model 459005 LP Gas Sit Down Rider
Type Floor Scrubber; S/N 1122735
SEE PHOTO
Sunnen Model CHV-31C Cylinder King Precision Hone;
S/N 1S1115, 48” Wide, Overarm Honing Spindle, Coolant in Base
SEE PHOTO
Impco Horizontal Shaft Straightening Machine; S/N N/A,
Approx. 24” Between Centers, (3) Shaft Checking Stands, Push &
Palm Buttons, Currently in Storage
SEE PHOTO
Crane Packaging Lapmaster 48 Lapping Machine;
S/N 45024, Currently in Storage
Cincinnati No. 2 Universal Tool & Cutter Grinder;
S/N 102T5F-70, Universal Grinding Head, Motorized Workhead,
Tailstock
24” Kansas Instruments Model PG-1400 Belt Sander;
Michigan Tool Model 3225 Roto-Flo Spline Rolling
Machine
AUCTION INFORMATION
Mitsubishi Model DWC90SB
CNC Wire Cut EDM
NEW
1999
Auction and Equipment Located at
FAXON MACHINING, INC.
11101 Adwood Drive
Cincinnati, Ohio 45240
Auction Date:
THURSDAY, AUGUST 11TH
STARTING AT 1:00 PM
Exclusive Rigging Company:
Georg Fischer Type ZM-80 D.E. Facing and
Centering Machine
SK Rigging Co., Inc.
11515 Rockfield Court
Cincinnati, OH 45241-1918
Brad Schneider
[email protected]
513.771.7766 office
513.782.3666 fax
There will be an exclusive rigging company
for all equipment at the facility. Pricing will
be available for each item in the auction
catalog. Check our website one week prior
to sale for catalog listing.
Inspection Times & Requirements:
Wednesday, August 10th From 10:00 AM to
4:00 PM and morning of sale starting at 9AM
➢ Plant Safety Regulations will be strictly
enforced. Proper attire will be required,
no shorts or open toed shoes.
Haas Model VF-3 Three-Axis CNC Vertical
Machining Center
NEW
1997
Sale Info:
This will be a short auction of only about
50 lots of primarily large machinery. Very
Few or No small items will be available. There
is a possibility that additional machinery and
equipment will be added to this auction, see
auction catalog one week prior to auction for
complete listing.
S/N 40368, 15 HP
Advance Hydrocat Model
459005 LP Gas Sit Down
Rider Type Floor Scrubber
Gardner Model SDG3-30 Double Disc Grinder
25 Ton Eitel Model RP-25
C-Frame Hydraulic
Straightening Press
(2) Olofsson Model 2075E Twin-Spindle
CNC Vertical Turning Centers
Impco Horizontal Shaft
Straightening Machine
Sunnen Model CHV-31C Cylinder King
Precision Hone
1134800B CIA Faxon Machining-6
7/8/11
8:54 AM
Page 2
(5)
(5) Makino
Makino CNC
CNC HMC’s
HMC’s
60”
60” Monarch
Monarch CNC
CNC VTL
VTL
(3)
(3) CNC
CNC Cylindrical
Cylindrical Grinders
Grinders
CNC
CNC Gun
Gun Drill
Drill
LATE MODEL CNC MACHINING EQUIPMENT BY
MAKINO, OKUMA, MAZAK, HAAS AND OTHER
AUTOMOTIVE MANUFACTURING EQUIPMENT
SURPLUS TO THE ONGOING OPERATIONS OF
FAXON
MACHINING, INC.
11101 Adwood Drive – Cincinnati, Ohio 45240
FIRST CLASS MAIL!
PRE-SORT
FIRST CLASS
U.S. POSTAGE
20 Miles Northwest of Downtown off I-275
PAID
SALE DATE:
Thursday, August 11th
CINCINNATI, OHIO
PERMIT NO. 3593
STARTING AT 1:00 PM
INSPECTION:
Wednesday, August 10th
10:00 AM to 4:00 PM
Cincinnati Industrial
Auctioneers Inc.
2020 DUNLAP ST., CINCINNATI, OHIO 45214
PHONE (513) 241-9701 / FAX (513) 241-6760
INTERNET: cia-auction.com
☞
Important Mail
TO BE DIRECTED TO THE ATTENTION
OF EXECUTIVE PERSONNEL
THURSDAY, AUGUST
AUGUST 11TH
11TH
THURSDAY,
SURPLUS TO THE ONGOING OPERATIONS OF
FAXON
MACHINING, INC.
11101 Adwood Drive
Cincinnati, Ohio 45240
20 Miles Northwest of Downtown off I-275
IMPORTANT NOTICE:
Although information has been obtained from sources
deemed reliable, the auctioneer makes no warranty or
guarantee, expressed or implied, as to the accuracy of
the information herein contained. It is for this reason
that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure
is intended to provide general information of the equipment being offered and is subject to errors, omissions,
additions or deletions. Please check with the Auctioneer’s
Office for a final listing. Items offered may or may not
necessarily be sold as described and/or photographed in
this brochure.
MAIL BIDS ACCEPTED WITH A 25% DEPOSIT
DIRECTIONS
TERMS OF SALE
From I-275 Just West of the junction of I-75 Exit
I-275 at No. 41 OH RT-4 Springfield Pike. Proceed
South on OH-4 for 1 Mile to Northland Blvd. Turn
Right and proceed 1/4 mile to Adwood Dr. Turn
Left and proceed 1/4 mile to sale site on right.
Watch for Auction Parking Signs and Arrows.
All equipment described herein will be sold “as
is”, “where is” to the highest bidder or bidders
for cash in accordance with our regular terms
and conditions of sale. Unless other satisfactory
arrangements are made, a 25% deposit in cash,
certified or cashier’s check payable to Cincinnati
Industrial Auctioneers, Inc., is required on all
purchases. Firm and personal checks accepted
only if accompanied by a letter from your bank
guaranteeing your funds. All sales are subject
to state and/or local taxes unless a signed
exemption form is presented at the time of purchase. All balances are due at the conclusion
of the sale. No merchandise may be removed
while the sale is in progress. All bidders must
comply with our Standard Terms of Sale,
copies of which will be available at the sale site
or can be obtained from our website.
AUCTIONEERS
Cincinnati Industrial Auctioneers, Inc. – License No. 63-1983-10439
Jeffrey L. Luggen – License No. 57-1983-33789
Jerome A. Luggen – License No. 52-1983-33799
Jeffrey M. Luggen – License No. 2010-0000-26
Joseph M. Luggen – License No. 2010-0000-19
John F. Rome – License No. 57-2000-84249
12% ONSITE BUYER’S PREMIUM
15% ONLINE BUYER’S PREMIUM
SALE UNDER THE MANAGEMENT OF
Cincinnati Industrial Auctioneers Inc.
2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760
INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding
SALE DATE
Thursday,
August 11th
1:00 pm