JUL Y 2 0 13 - Campbell Fittings

Transcription

JULY 2013
®
A
PAGES 3-10
B
PAGES 11-14
• Combination Nipples
• Menders
• TOE Nipples
• Reducing Nipples
• Suction Hose Couplings
• NH Suction Hose Couplings
• Foot Valves
• Strainers
• Ball & Socket Couplings
F
PAGES 37-40
G
PAGES 41-48
H
PAGES 49-54
I
PAGES 55-62
• ChemJoint™ Couplings
• ChemJoint™ Male Stems
• ChemJoint™
Weld-on Couplings
• ChemJoint™ Unions
• Ferrules for
ChemJoint Couplings
• Ferrules (standard length)
• Ferrules (long)
• Ferrules (light duty)
• Sleeves (standard length)
• Sleeves (short)
• Crimpnology Nipples
• Flanges
• Ferrules for
Crimpnology Nipples
• FRAC-16C
• 206 Hose Union
C
PAGES 15-24
D
PAGES 25-30
E
• Campbell Cobra™
Cam & Groove Couplings
• Standard Cobra™
• Ferrules and Sleeves for
Campbell Cobra and
Standard Cobra
• Viton® Seal Ground Joint
Couplings
• Interlocking Male Stems
• Air Hammer Couplings
• Interlocking U-Bolt Clamps
• Whip Check Safety Cables
• Ferrules for Ground Joints
PAGES 31-36
• Universal Couplings
• UniversaLock™ Couplings
• Universal Clamps
• Single-Lock Couplings
• Double-Lock Couplings
• Nitrogen Couplings
• Throttle Valves
• Light Duty Ferrules
• Barbed Insert Fittings
• Oxygen Acetylene
Fittings
• Brass Push-on Fittings
• Garden Hose Couplings
• Brass Ferrules
• Band Clamps
• Worm Gear Clamps
• T-Bolt Clamps
J
PAGES 63-68
• Combination Nipples
• Suction Hose Couplings
• Universal Couplings
• Sand Blast Couplings
• Ground Joint Couplings
• Male Stems
• 2, 4, and 6-Bolt Clamps
• Double-Bolt Clamps
• Spiral Clamps
• Brass Fire Hose Couplings
Campbell Coupling Selection Guide
From the Selection Guide below, choose an appropriate coupling based on the hose type and application working pressure.
Hose construction will affect the working pressure of a hose system. The following chart outlines the maximum working pressure of each Campbell coupling
based on the type and size of hose used and identifies the Campbell
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
catalog section in which the coupling can be found.
Hose System Components
Fitting/Coupling
A
B
C
D
E
F
Combination Nipple
Combination Nipple
Combination Nipple
Pin Lug Coupling
Pin Lug Coupling
Ball & Socket Coupling3, 6
Ball & Socket Coupling3, 6
Crimpnology Nipple
Crimpnology Nipple
FRAC Crimpnology Nipple
Long Shank Nipple
206 Hose Union
Crimpnology Flange (Steel)4
Crimpnology Flange (SS)4
Campbell COBRA Cam & Groove (SS)5
Campbell COBRA Cam & Groove (Alum)5
Viton Ground Joint Coupling
Viton Ground Joint/Air Hammer Cplg
Male Stem
Male Stem
Male Stem and Mender
UniversaLock6
UniversaLock6
Universal6
Universal6
Single-Lock Coupling
Double-Lock Coupling
ChemJoint/Male Stem
ChemJoint/Male Stem
ChemJoint Weld-On and Union
Hose Size
Attachment
Hose Type
1/2
3/4
1
Short Sleeve
Short Sleeve
Short Sleeve
Short Sleeve
Short Sleeve
Short Sleeve
Short Sleeve
Ferrule
Ferrule
Ferrule
Long Ferrule
Long Ferrule
Ferrule
Ferrule
Ferrule
Ferrule
Staked Ferrule
Long Ferrule
Long Ferrule
Staked Ferrule
U-Bolt Clamp
U-Bolt Clamp
Ferrule
Bolt Clamp
Ferrule
Bolt Clamp
Ferrule
Ferrule
Ferrule
Ferrule
None
Rubber
Chemical
PVC
Rubber
PVC
Rubber
PVC
Chem/Rubber
Soft
Rubber
Rubber
Rubber
Chem/Rubber
Chem/Rubber
Chem/Rubber
Chem/Rubber
Steam
Rubber
Rubber
Steam
Rubber/Steam
Rubber/Steam
Air
Air
Air
Air
Air
Air
Chemical
Rubber
None
400
200
125
–
–
–
–
–
–
–
–
–
–
–
–
–
1250
1000
1000
1250
1500
1500
300
150
150
150
300
300
350
350
–
350
200
125
–
–
–
–
–
–
–
–
–
–
–
–
–
1250
1000
1000
1250
1250
1250
300
150
150
150
300
300
400
400
800
300
200
100
–
–
–
–
500
200
–
–
–
–
–
250
–
1250
1000
1000
1250
1250
1250
300
150
150
150
300
300
450
450
800
2
1-1/4 1-1/2
275
140
90
275
90
–
–
350
175
–
–
–
–
–
–
–
–
1000
1000
–
1250
1250
–
–
–
–
–
–
325
425
–
250
130
85
250
85
–
–
325
150
–
1000
–
285
230
250
250
–
1000
1000
–
1250
1250
–
–
–
–
–
–
250
400
650
HOSE SYSTEM PRESSURE DERATING MULTIPLIERS FOR ELEVATED TEMPERATURES (°F)*
Hose Type
70°
90°
150°
200°
250°
300°
350°
400°
450°
500°
Steam, Hot Tar, Asphalt
1.00
0.95
0.81
0.68
0.56
0.44
0.32
0.20
0.08
N/R
PVC
1.00
0.82
0.30
N/R
N/R
N/R
N/R
N/R
N/R
N/R
All other
1.00
0.91
0.64
0.42
0.20
N/R
N/R
N/R
N/R
N/R
No hose: weld-on or union 1.00
1.00
0.97
0.95
0.92
0.89
0.86
0.84
0.81
N/R
* System temperature is affected by both the media and the environment.
N/R means NOT RECOMMENDED!
1) For normal fluids (not hazardous, combustible, flammable, volatile, corrosive, ammonia or LPG). Individual testing
should be employed for non-normal fluids to ensure capability. Pressures shown are only valid for the fitting/coupling/attachment and hose combinations indicated and for their threaded mating parts. System working pressure
does not include end pull forces. Not for plastic fittings/couplings. All hose systems must be assembled using
Campbell procedures and crimp specifications. See elevated temperature derating chart above. Consult factory for
reduced temperatures. Never exceed the working pressure of the lowest rated component in the hose
system. Maximum working pressure includes the highest pressure the system will experience, such as spikes, surges,
and water hammer effects. (For example: If a system consists of a hose rated to 150 PSI and the couplings are rated to
500 PSI, the system should never be used in excess of 150 PSI.)
Hose Assemblies vs. Hose Systems
A hose assembly is a collection of components using attachments,
such as band clamps or bolt clamps.
A hose system uses Campbell’s integrated-designed fittings,
couplings, ferrules, sleeves, or U-bolt clamps and is assembled
using Campbell crimping procedures and specifications. A hose
system is repeatable, measurable, and performance rated.
All Campbell pressure ratings are verified by extensive hydrostatic
burst testing with hoses to ASTM D380 standards. Test results for
2
2-1/2
3
4
6
8
10 12
225
120
65
225
65
3003
1703
300
150
–
1000
–
285
230
250
200
–
1000
1000
–
1250
1250
–
–
–
–
–
–
250
350
600
225
110
60
210
60
–
–
275
125
–
650
–
275
230
150
150
–
650
650
–
800
800
–
–
–
–
–
–
225
325
–
225
100
55
200
55
2503
1403
250
100
–
600
–
250
230
150
125
–
500
500
–
500
500
–
–
–
–
–
–
225
300
600
175
50
40
175
40
2253
1003
250
75
400
500
500
250
230
100
75
–
400
400
–
500
500
–
–
–
–
–
–
200
250
–
150
–
30
150
30
1403
803
225
50
–
–
–
225
225
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
125
–
20
100
20
603
503
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
75 Call
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
2) Hose descriptions: Air - any smooth bore rubber air or
water hose. Includes most general purpose hose;
Chemical – any smooth bore rubber chemical hose,
including plastic lined (PTFE, UHMW, XLPE). Does not
include soft tube hose; PVC – any smooth bore PVC or
vinyl hose; Rubber – any smooth bore rubber hose
except steam, hot tar & asphalt, chemical, and soft
tube hose; Soft – any smooth bore rubber hose with a
thick, soft tube. Usually gum rubber and some foodgrade hose; Steam – includes hot tar and asphalt
3) Ball & Socket pressure ratings are based on 1.5 x WP.
4) Due to limitations with flanges, consult factory for
temperatures other than 70°F.
5) Campbell COBRA Cam & Groove Couplings are
identified by the name “Campbell” on the body, by the
ferrule interlock groove, and by the part number, which
includes a “C” suffix. Not for air or gas service.
6) Maximum temperature 160°F.
specific hoses can be provided upon request.
The Safety Factor
The RMA requires that hose working pressures include a safety factor commensurate with their intended
application. Most hoses are required to meet a 4x safety factor, except the following: Water hose rated under
150 PSI requires a 3x safety factor; Steam hose requires a 10x safety factor; and Hose conveying
gas in a liquid state requires a 5x safety factor. (For example: a 150 PSI rated air hose has a 4x safety factor
and must be successfully tested to a minimum of 600 PSI.)
Campbell’s fitting and coupling pressure ratings match the RMA safety factor requirements with most hoses.
1
Due to the wide variety of industrial hoses, as well as variations in design, construction, and material, we
cannot guarantee that our pressure ratings meet the safety factor requirement with every hose.
ALPHABETICAL INDEX
206 Hose Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Sleeves for Ball & Socket Couplings . . . . . . . 9-10, 46-47
Air Hammer Couplings . . . . . . . . . . . . . . . . . . . . . . 28-29
Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ball & Socket Couplings. . . . . . . . . . . . . . . . . . . . . . . . . 9
Suction Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . 7-8
Band Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-59
Suction Hose Couplings (imported) . . . . . . . . . . . . . . . 65
Barbed Insert Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Throttle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Brass Fire Hose Accessories . . . . . . . . . . . . . . . . . . 67-68
TOE Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Brass Push-on Fittings. . . . . . . . . . . . . . . . . . . . . . . . . 52
Universal Couplings, Campbell. . . . . . . . . . . . . . . . . . . 33
Cam & Groove Couplings, standard COBRA . . . . . 17-22
Universal Couplings (standard imported) . . . . . . . . . . . 65
Cam & Groove Couplings, Campbell COBRA . . . . . . . 17
UniversaLock Couplings . . . . . . . . . . . . . . . . . . . . . . . 33
Campbell Coupling Selection Guide . . . . . . . . . . . . . . . 1
Whip Check Safety Cables . . . . . . . . . . . . . . . . . . . . . 29
ChemJoint Male Stems . . . . . . . . . . . . . . . . . . . . . . . . 39
Worm Gear Clamps . . . . . . . . . . . . . . . . . . . . . . . . 59-60
ChemJoint Viton Seal Couplings. . . . . . . . . . . . . . . 39-40
Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Clamps, Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-59
Clamps, Double-Bolt (imported). . . . . . . . . . . . . . . . . . 67
Clamps, Interlocking 360 U-Bolt . . . . . . . . . . . . . . . . . 29
Clamps, Interlocking 2, 4, 6-Bolt (imported) . . . . . . . . . 67
Clamps, Spiral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Clamps, T-Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Clamps, Worm Gear. . . . . . . . . . . . . . . . . . . . . . . . 59-60
Combination Nipples . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Crimpnology Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Double-Lock Couplings . . . . . . . . . . . . . . . . . . . . . 34-35
Ferrules, All Crimpnology . . . . . . . . . . . . . . . . . . . . 43-44
Ferrules, Brass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Ferrules for Campbell COBRA . . . . . . . . . . . . . . . . 22, 43
Ferrules for ChemJoint Viton Seal Couplings . . . . . 40, 43
Ferrules for Crimpnology Nipples . . . . . . . . . . . 14, 43-44
Ferrules, Light Duty . . . . . . . . . . . . . . . . . . . . . . . . 36, 44
Ferrules for Viton Seal Ground Joint Couplings . . . 30, 44
Foot Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Garden Hose Couplings. . . . . . . . . . . . . . . . . . . . . . . . 53
Glossary of Campbell Crimpnology Terms . . . . . . . . . . 48
Ground Joint Couplings, Campbell Viton Seal . . . . 27-28
Ground Joint Couplings (imported) . . . . . . . . . . . . . . . 66
Male Stems, ChemJoint. . . . . . . . . . . . . . . . . . . . . . . . 39
Male Stems, Interlocking . . . . . . . . . . . . . . . . . . . . . . . 27
Male Stems, Interlocking (imported) . . . . . . . . . . . . . . . 66
Menders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Menders, Interlocking . . . . . . . . . . . . . . . . . . . . . . . . . 28
NH Suction Hose Couplings . . . . . . . . . . . . . . . . . . . . . 8
Nitrogen Couplings. . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Oxygen Acetylene Fittings . . . . . . . . . . . . . . . . . . . . . . 52
Reducing Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Sand Blast Couplings (imported) . . . . . . . . . . . . . . . . . 66
Single-Lock Couplings . . . . . . . . . . . . . . . . . . . . . . . . . 34
Sleeves for Cam & Groove Couplings . . . . . 23-24, 45-46
Sleeves, All Crimpnology . . . . . . . . . . . . . . . . . . . . 46-47
Sleeves for Suction Hose Couplings . . . . . . . 9-10, 46-47
2
WE WORK
GREAT UNDER
PRESSURE!
®
A
3
A
Fittings & Accessories for Multi-Purpose and Utility Hose
CampbellCrimpnology™
offers crimping flexibility for
your multi-purpose hose
applications.
COMBINATION NIPPLES
AND MENDERS
SUCTION HOSE COUPLINGS
Features & Benefits
• Maximum number of serrations for
maximum holding power.
• Long lead serration for easier hose insertion.
• Suction Couplings machined from pipe
eliminate porosity and parting lines,
improving sealing and retention.
Features & Benefits
• Maximum
number of
serrations for
maximum
holding power.
• Long lead
serration for
easier hose
insertion.
• Formed hex
wrench area
on 3/4” through
1-1/2” combination nipples for
easier installation.
Recommended Hose Attachment
• Sleeves (Section G)
• Preformed Bands (Section I)
Recommended Use
• Liquid, bulk handling
Manufacturing
Suction Hose
Couplings from
pipe eliminates
wide, flat mating
surfaces at
the male and
female halves.
• Preformed Bands (Section I)
Recommended Use
• Liquid, bulk handling, low-pressure air
BALL & SOCKET COUPLINGS
Features & Benefits
• Proven, Campbell-style machined
hose shank is designed for crimping
(crimp specs available).
• Shank design dramatically improves sealing
and retention, cuts installation time in half.
• Hose shanks are welded to ball & socket
ball ends.
Recommended Use
• Water Suction/Discharge
• Sewage bypass
Bauer-style vs. Campbell
Ball & Socket
4
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
Combination Nipple
Combination Nipple
Combination Nipple
Suction Coupling
Suction Coupling
Ball & Socket Coupling
Ball & Socket Coupling
Short Sleeve
Short Sleeve
Short Sleeve
Short Sleeve
Short Sleeve
Sleeve
Sleeve
Rubber
Chemical
PVC
Rubber
PVC
Rubber
PVC
400
200
150
–
–
–
–
350
200
125
–
–
–
–
300
200
100
–
–
–
–
2
See footnotes 1, 2, 3 and 6 on Page 1.
1-1/4 1-1/2
275
140
90
275
90
–
–
250
130
85
250
85
–
–
2
2-1/2
225 210
120 110
65
60
225 210
65
60
300*
–
170*
–
3
4
6
8
200 175 150 100
100 50
–
–
55
40
30
20
200 175 150 100
55
40
–
–
250* 225* 140* 60*
140* 100* 80* 50*
*Ball & Socket safety factor is 1.5 x working pressure.
10
12
75
–
–
–
–
–
–
Call
–
–
–
–
–
–
A
COMBINATION
NIPPLES & MENDERS
Hastelloy®
1
1-1/2
2
3
4
HAHAST-4
HAHAST-6
HAHAST-8
HAHAST-12
HAHAST-16
GROOVED
POR
POR
POR
POR
POR
Brass
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
part
number
HAS-2
HAS-3
HAS-4
HAS-5
HAS-6
HAS-8
HAS-10
HAS-12
HAS-16
HAS-20
HAS-24
HAS-32
HAS-40
HAS-48
list
each
4.22
4.32
5.03
6.49
7.26
9.45
19.56
22.97
36.12
80.60
92.81
157.14
267.62
371.13
Plated Steel
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
HAPS-2
HAPS-3
HAPS-4
HAPS-5
HAPS-6
HAPS-8
HAPS-10
HAPS-12
HAPS-16
HAPS-20
HAPS-24
HAPS-32
HAPS-40
HAPS-48
4.68
4.83
5.84
6.92
8.17
11.41
21.86
26.48
40.95
91.99
105.57
203.88
337.27
482.01
316 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
17.13
24.58
24.76
31.41
35.21
50.33
88.33
120.73
247.52
Aluminum
THREADED
Steel
HAB-2
HAB-3
HAB-4
HAB-5
HAB-6
HAB-8
HAB-10
HAB-12
HAB-16
HASS-2
HASS-3
HASS-4
HASS-5
HASS-6
HASS-8
HASS-10
HASS-12
HASS-16
HASS-20
HASS-24
HASS-32
20.89
20.94
21.04
26.83
32.27
44.55
81.92
116.23
182.36
400.95
503.12
965.25
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
HAA-2
HAA-3
HAA-4
HAA-5
HAA-6
HAA-8
HAA-10
HAA-12
HAA-16
HAA-20
HAA-24
15.18
14.41
14.41
16.00
16.33
19.68
48.00
48.00
76.78
167.97
188.75
Poly-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
HAPP-2
HAPP-3
HAPP-4
HAPP-5
HAPP-6
HAPP-8
HAPP-12
HAPP-16
0.91
1.03
1.47
3.17
5.86
7.41
13.96
44.09
hose
size
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
hose
size
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
part
number
HAGS-3
HAGS-4
HAGS-5
HAGS-6
HAGS-8
HAGS-10
HAGS-12
HAGS-16
HAGS-20
HAGS-24
HAGS-32
HAGS-40
HAGS-48
list
each
14.89
10.89
11.94
14.32
17.63
23.71
25.54
37.37
80.79
99.59
171.20
313.73
420.57
316 Stainless
1
1-1/4
1-1/2
2
3
4
HAGSS-4
HAGSS-5
HAGSS-6
HAGSS-8
HAGSS-12
HAGSS-16
42.57
45.87
46.04
52.41
142.92
198.96
part
number
HRS-4X3
HRS-5X4
HRS-6X5
HRS-8X6
HRS-10X8
HRS-12X10
HRS-16X12
list
each
11.66
15.34
13.86
16.96
30.96
37.32
75.79
REDUCER
Steel
npt x
hose
1 x 3/4
1-1/4 x 1
1-1/2 x 1-1/4
2 x 1-1/2
2-1/2 x 2
3 x 2-1/2
4x3
Plated Steel
BEVELED
Steel
Steel
part
number
HAS-3 BV
HAS-4 BV
HAS-5 BV
HAS-6 BV
HAS-8 BV
HAS-10 BV
HAS-12 BV
HAS-16 BV
HAS-20 BV
HAS-24 BV
HAS-32 BV
HAS-40 BV
HAS-48 BV
list
each
6.48
6.56
8.69
8.80
11.20
22.21
26.35
40.08
86.81
101.19
181.28
320.17
453.82
1 x 3/4
1-1/4 x 1
1-1/2 x 1-1/4
2 x 1-1/2
2-1/2 x 2
3 x 2-1/2
4x3
HRPS-4X3
HRPS-5X4
HRPS-6X5
HRPS-8X6
HRPS-10X8
HRPS-12X10
HRPS-16X12
11.75
15.40
14.02
17.63
32.81
38.94
78.17
316 Stainless
1 x 3/4
1-1/4 x 1
1-1/2 x 1-1/4
2 x 1-1/2
2-1/2 x 2
HRSS-4X3
HRSS-5X4
HRSS-6X5
HRSS-8X6
HRSS-10X8
46.16
56.04
83.40
98.91
118.67
continued on next page
316 Stainless
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
8
HASS-3 BV
HASS-4 BV
HASS-5 BV
HASS-6 BV
HASS-8 BV
HASS-10 BV
HASS-12 BV
HASS-16 BV
HASS-24 BV
HASS-32 BV
25.54
26.13
38.97
34.17
54.39
96.71
122.00
182.72
502.28
797.29
Other configurations and materials not
listed above can be quoted upon request.
5
PHONE 800-367-3678
FAX 800-367-3670
TOE NIPPLES AND
REDUCING NIPPLES
EXPANDER
Steel
npt x
hose
3/4 x 1
1 x 1-1/4
1-1/4 x 1-1/2
1-1/2 x 2
2 x 2-1/2
2-1/2 x 3
3x4
MENDER
part
number
HES-3X4
HES-4X5
HES-5X6
HES-6X8
HES-8X10
HES-10X12
HES-12X16
list
each
7.67
9.70
10.37
19.33
29.67
36.43
73.35
Plated Steel
3/4 x 1
1 x 1-1/4
1-1/4 x 1-1/2
1-1/2 x 2
2 x 2-1/2
2-1/2 x 3
3x4
HEPS-3X4
HEPS-4X5
HEPS-5X6
HEPS-6X8
HEPS-8X10
HEPS-10X12
HEPS-12X16
8.15
10.32
10.84
21.05
30.92
38.49
84.21
316 Stainless
1/2 x 3/4
3/4 x 1
1 x 1-1/4
1 x 1-1/2
1-1/4 x 1-1/2
1-1/4 x 2
1-1/2 x 2
2 x 2-1/2
HESS-2X3
HESS-3X4
HESS-4X5
HESS-4X6
HESS-5X6
HESS-5X8
HESS-6X8
HESS-8X10
33.48
31.89
71.72
79.69
82.90
87.68
95.66
119.55
LONG SHANK
Steel
hose
size
1-1/4
1-1/2
2
2-1/2
3
4
part
number
HALS-5
HALS-6
HALS-8
HALS-10
HALS-12
HALS-16
list
each
18.51
21.28
26.09
46.21
48.10
68.95
Plated Steel
1-1/4
1-1/2
2
2-1/2
3
4
HALPS-5
HALPS-6
HALPS-8
HALPS-10
HALPS-12
HALPS-16
18.66
21.64
26.47
46.35
48.90
70.31
316 Stainless
1-1/4
1-1/2
2
2-1/2
3
4
HALSS-5
HALSS-6
HALSS-8
HALSS-10
HALSS-12
HALSS-16
64.25
70.83
81.90
115.64
149.36
353.35
Steel
hose
size
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
part
number
HCS-38
HCS-2
HCS-3
HCS-4
HCS-5
HCS-6
HCS-8
HCS-10
HCS-12
HCS-16
HCS-20
HCS-24
HCS-32
HCS-40
HCS-48
list
each
7.34
6.63
5.39
5.50
8.42
8.25
10.89
21.05
22.13
37.45
127.35
77.86
209.48
361.17
574.28
Plated Steel
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
HCPS-38
HCPS-2
HCPS-3
HCPS-4
HCPS-5
HCPS-6
HCPS-8
HCPS-10
HCPS-12
HCPS-16
HCPS-20
HCPS-24
HCPS-32
HCPS-40
HCPS-48
7.79
7.04
5.71
5.81
8.91
8.67
11.51
22.66
23.28
40.13
135.35
82.18
220.32
381.53
604.08
316 Stainless
3/4
1
1-1/4
1-1/2
2
3
4
HCSS-3
HCSS-4
HCSS-5
HCSS-6
HCSS-8
HCSS-12
HCSS-16
56.81
63.29
68.17
80.04
81.14
186.61
219.08
Brass
3/4
1
1-1/4
1-1/2
2
HCB-3
HCB-4
HCB-5
HCB-6
HCB-8
14.25
14.67
23.75
38.54
42.42
TOE NIPPLES
Steel
npt x
length
1/2 x 1-1/2
1/2 x 2
3/4 x 1-1/2
3/4 x 2
1x2
1-1/4 x 2
1-1/4 x 2-1/2
1-1/2 x 2
1-1/2 x 2-1/2
1-1/2 x 3
2x2
2 x 2-1/2
2x3
2-1/2 x 2-1/2
3x3
3 x 3-1/2
3x4
list
each
1.95
1.95
2.41
2.43
3.55
4.63
5.20
5.53
5.91
6.72
6.89
7.66
8.77
24.88
27.95
29.96
33.26
304 Stainless
1/2 x 1-1/2
1/2 x 2
3/4 x 1-1/2
3/4 x 2
1x2
1-1/4 x 2
1-1/4 x 2-1/2
1-1/2 x 2
1-1/2 x 2-1/2
1-1/2 x 3
2x2
2 x 2-1/2
2x3
2-1/2 x 2-1/2
3x3
3 x 3-1/2
3x4
RNS-2S
RNS-2
RNS-3S
RNS-3
RNS-4
RNS-5
RNS-5L
RNS-6
RNS-6L
RNS-6XL
RNS-8
RNS-8L
RNS-8XL
RNS-10S
RNS-12
RNS-12L
RNS-12XL
9.01
9.39
9.56
9.78
14.13
14.73
15.94
16.99
17.24
18.04
23.02
23.75
28.04
66.31
70.68
76.63
89.40
REDUCING NIPPLES
Steel
npt x
npt
3/4 x 1/2
1 x 3/4
1-1/4 x 1
1-1/2 x 1-1/4
2 x 1-1/2
2-1/2 x 2
3 x 2-1/2
4x3
6
part
number
RN-2S
RN-2
RN-3S
RN-3
RN-4
RN-5
RN-5L
RN-6
RN-6L
RN-6XL
RN-8
RN-8L
RN-8XL
RN-10S
RN-12
RN-12L
RN-12XL
part
number
NS 3-2
NS 4-3
NS 5-4
NS 6-5
NS 8-6
NS 10-8
NS 12-10
NS 16-12
list
each
9.62
10.30
15.09
16.31
17.15
34.30
37.75
60.05
A
SUCTION HOSE
COUPLINGS
FEMALE SHANK
FEMALE LONG SHANK
Shank: Plated Steel
Nut: Brass
hose
size
1-1/4
1-1/2
2
2-1/2
3
4
6
8
COMPLETE SET
Shanks: Plated Steel
Nut: Brass
hose
size
1-1/4
1-1/2
2
2-1/2
3
4
6
8
part
number
CSB-5
CSB-6
CSB-8
CSB-10
CSB-12
CSB-16
CSB-24
CSB-32
list
each
44.04
30.90
40.28
57.67
68.48
110.23
228.44
763.86
1-1/2
2
2-1/2
3
4
6
CSD-6
CSD-8
CSD-10
CSD-12
CSD-16
CSD-24
30.71
41.26
60.19
70.24
111.91
241.55
Nut: Ductile Iron
Shanks: Brass
Nut: Brass
1-1/4
1-1/2
2
2-1/2
3
4
CBB-5
CBB-6
CBB-8
CBB-10
CBB-12
CBB-16
CSS-6
CSS-8
CSS-12
list
each
26.39
17.90
20.49
29.63
38.02
65.76
129.84
599.56
Shank: Plated Steel
Nut: Ductile Iron
1-1/2
2
2-1/2
3
4
6
FSD-6
FSD-8
FSD-10
FSD-12
FSD-16
FSD-24
17.65
21.39
32.14
39.83
67.44
143.03
Shank: Brass
Nut: Brass
1-1/4
1-1/2
2
2-1/2
3
4
FBB-5
FBB-6
FBB-8
FBB-10
FBB-12
FBB-16
32.52
28.20
38.69
69.42
91.65
157.30
Shank: 316 Stainless
Nut: 316 Stainless
1-1/2
2
3
FSS-6
FSS-8
FSS-12
117.38
157.09
224.42
MALE SHANK
53.01
47.83
63.46
109.08
162.66
275.70
Shanks: 316 Stainless
Nut: 316 Stainless
1-1/2
2
3
part
number
FSB-5
FSB-6
FSB-8
FSB-10
FSB-12
FSB-16
FSB-24
FSB-32
148.47
201.97
348.73
Plated Steel
hose
size
1-1/4
1-1/2
2
2-1/2
3
4
6
8
part
number
MS-5
MS-6
MS-8
MS-10
MS-12
MS-16
MS-24
MS-32
MB-5
MB-6
MB-8
MB-10
MB-12
MB-16
20.48
19.76
23.81
49.60
70.62
118.52
316 Stainless Steel
1-1/2
2
3
MSS-6
MSS-8
MSS-12
hose
size
1-1/2
2
2-1/2
3
4
part
number
LSB-6
LSB-8
LSB-10
LSB-12
LSB-16
list
each
43.86
51.17
83.27
77.14
121.79
Shank: Brass
Nut: Brass
1-1/2
2
2-1/2
3
4
LBB-6
LBB-8
LBB-10
LBB-12
LBB-16
56.89
70.61
106.88
151.01
247.11
Shank: 316 Stainless
Nut: 316 Stainless
(includes Teflon Washer)
1-1/2
2
3
LSS-6
LSS-8
LSS-12
138.11
172.64
233.05
FEMALE LONG SHANK
(hex nut)
Shank: Brass
Hex Nut: Brass
hose
size
1-1/2
2
2-1/2
3
4
part
number
XLFB-6
XLFB-8
XLFB-10
XLFB-12
XLFB-16
list
each
89.25
103.14
138.86
196.35
376.86
MALE LONG SHANK
list
each
17.16
12.71
19.30
27.30
29.62
43.25
95.89
159.77
Brass
1-1/4
1-1/2
2
2-1/2
3
4
Shank: Plated Steel
Nut: Brass
31.08
44.89
124.30
Plated Steel
hose
size
1-1/2
2
2-1/2
3
4
part
number
LMS-6
LMS-8
LMS-10
LMS-12
LMS-16
list
each
21.05
26.31
43.86
43.43
66.67
Brass
1-1/2
2
2-1/2
3
4
LMB-6
LMB-8
LMB-10
LMB-12
LMB-16
41.66
61.48
89.25
137.86
322.81
316 Stainless
1-1/2
2
3
LMSS-6
LMSS-8
LMSS-12
60.41
88.04
160.55
7
FOOT VALVES
& STRAINERS
NH SUCTION HOSE
COUPLINGS
(NST threads)
WASHER
Neoprene (NPSM)
hose
size
1-1/4
1-1/2
2
2-1/2
3
4
6
8
Nut: Brass
part
number
NHS-6
NHS-10
list
each
53.94
102.98
Shanks: Brass
Nut: Brass
1-1/2
2-1/2
NHB-6
NHB-10
85.00
171.92
FEMALE SHANK (NH)
Nut: Brass
hose
size
1-1/2
2-1/2
part
number
FHS-6
FHS-10
list
each
31.87
65.38
Shanks: Brass
Nut: Brass
1-1/2
2-1/2
FHB-6
FHB-10
38.64
81.12
MALE SHANK (NH)
Plated Steel
hose
size
1-1/2
2-1/2
part
number
MHS-6
MHS-10
list
each
22.06
37.60
Brass
1-1/2
2-1/2
MHB-6
MHB-10
list
each
0.72
0.72
0.80
0.95
1.49
1.85
7.50
16.23
Teflon® (NPSM)
COMPLETE SET (NH)
hose
size
1-1/2
2-1/2
part
number
WN-5
WN-6
WN-8
WN-10
WN-12
WN-16
WN-24
WN-32
46.35
90.79
1-1/2
2
3
WT-6
WT-8
WT-12
14.02
16.52
22.71
Neoprene (NH)
1-1/2
2-1/2
NHW-6
NHW-10
3.18
3.18
SPANNER WRENCH
size
1-1/2
2
3
4
6
8
part
number
SW-6
SW-8
SW-12
SW-16
SW-32
SW-32
list
each
9.75
9.75
11.68
11.68
55.61
55.61
ADJUSTABLE HYDRANT
WRENCH
part
number
AHW-1
list
each
53.29
• Adjustable for 1-1/4"
square nuts and
pentagon hydrant
nuts up to 1-3/4"
point to flat.
• Spanner hook for
1-1/2" through 6"
pin lug nuts.
• 18" overall length.
• Sold in 5 per carton
quantity.
ROUND HOLE
STEEL STRAINER
npsm
size
1-1/2
2
2-1/2
3
4
6
8
part
number
RHS-6
RHS-8
RHS-10
RHS-12
RHS-16
RHS-24
RHS-32
list
each
21.33
24.34
27.94
33.99
47.28
132.96
295.49
SQUARE HOLE
STEEL STRAINER
npsm
size
1-1/2
2
2-1/2
3
4
6
part
number
SHS-6
SHS-8
SHS-10
SHS-12
SHS-16
SHS-24
list
each
22.60
25.70
29.55
37.76
52.54
147.76
TOP HOLE
STEEL STRAINER
npsm
size
1-1/2
2
3
part
number
THS-6
THS-8
THS-12
list
each
65.33
73.10
165.11
BOTTOM HOLE
STEEL STRAINER
npsm
size
1-1/2
2
3
part
number
BHS-6
BHS-8
BHS-12
list
each
70.36
79.79
178.67
FOOT VALVE
(painted cast iron)
Foot Valve
components
are available
upon request.
8
npt
size
1-1/2
2
2-1/2
3
4
6
8
part
number
FV-6
FV-8
FV-10
FV-12
FV-16
FV-24
FV-32
list
each
32.50
47.80
61.05
79.60
132.34
326.56
649.43
A
BALL & SOCKET
COUPLINGS
SLEEVES
FEMALE*
(socket x machined hose end)
Plated Steel
hose
size
2
3
4
6
8
part
number
BFGS-8
BFGS-12
BFGS-16
BFGS-24
BFGS-32
list
each
61.32
86.26
133.12
279.12
436.36
*Sold without SBR ring gasket listed below
MALE
(ball x machined hose end)
Plated Steel
hose
size
2
3
4
6
8
part
number
BMGS-8
BMGS-12
BMGS-16
BMGS-24
BMGS-32
list
each
60.77
85.22
126.36
252.16
395.37
LEVER
Galvanized Steel
hose
size
2
3
4
6
8
part
number
BLGS-8
BLGS-12
BLGS-16
BLGS-24
BLGS-32
list
each
29.88
48.04
76.15
145.12
262.79
RING GASKET
SBR
hose
size
2
3
4
6
8
part
number
BSG-8
BSG-12
BSG-16
BSG-24
BSG-32
list
each
5.08
6.15
7.19
14.17
21.71
SLEEVES
for medium machined shank couplings
Plated Steel
hose
size
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
sleeve
i.d.
1
1-8/64
1-12/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-40/64
1-48/64
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-8/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
2-48/64
2-56/64
3
3-8/64
3-16/64
part
number
SPS050100S
SPS075108S
SPS075112S
SPS075116S
SPS075120S
SPS075124S
SPS100128S
SPS100132S
SPS100136S
SPS100140S
SPS100144S
SPS100148S
SPS125140S
SPS125148S
SPS125152S
SPS125156S
SPS150160S
SPS150200S
SPS150204S
SPS150208S
SPS150212S
SPS150216S
SPS150220S
SPS150224S
SPS200208S
SPS200216S
SPS200224S
SPS200228S
SPS200232S
SPS200236S
SPS200240S
SPS200244S
SPS200248S
SPS200252S
SPS200256S
SPS200260S
SPS200300S
SPS250248S
SPS250256S
SPS250300S
SPS250308S
SPS250316S
list
each
4.73
4.90
4.90
4.90
4.90
4.90
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.94
4.94
4.94
4.94
4.94
4.94
4.94
4.94
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
8.18
8.18
8.18
8.18
8.18
9
PHONE 800-367-3678
FAX 800-367-3670
Plated Steel Sleeves
(continued from previous page)
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
5
5
5
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
10
10
10
10
10
10
10
12
3-24/64
3-32/64
3-8/64
3-16/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-16/64
4-24/64
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-36/64
5-48/64
5-60/64
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7-8/64
7-16/64
7-24/64
8-16/64
8-32/64
8-48/64
9
9-16/64
9-32/64
9-48/64
10-32/64
10-48/64
10-56/64
11
11-16/64
11-32/64
11-48/64
SPS250324S 8.18
SPS250332S 8.18
SPS300308S 9.75
SPS300316S 9.75
SPS300324S 9.75
SPS300328S 9.75
SPS300332S 9.75
SPS300336S 9.75
SPS300340S 9.75
SPS300344S 9.75
SPS300348S 9.75
SPS300352S 9.75
SPS300356S 9.75
SPS300360S 9.75
SPS300400S 9.75
SPS400416S 13.14
SPS400424S 13.14
SPS400432S 13.14
SPS400436S 13.14
SPS400440S 13.14
SPS400444S 13.14
SPS400448S 13.14
SPS400452S 13.14
SPS400456S 13.14
SPS400460S 13.14
SPS400500S 13.14
SPS500536 32.09
SPS500548 32.09
SPS500560 32.09
SPS600616 36.76
SPS600624 36.76
SPS600632 36.76
SPS600640 36.76
SPS600648 36.76
SPS600656 36.76
SPS600700 36.76
SPS600708 36.76
SPS600716 36.76
SPS600724 36.76
SPS800816 62.46
SPS800832 62.46
SPS800848 62.46
SPS800900 62.46
SPS800916 62.46
SPS800932 62.46
SPS800948 62.46
SPS101032 118.00
SPS101048 118.00
SPS101056 118.00
SPS101100 118.00
SPS101116 118.00
SPS101132 118.00
SPS101148 118.00
SPS120XXX POR
304 Stainless
10
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1-4/64
1-8/64
1-12/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
SSS050100S
SSS075104S
SSS075108S
SSS075112S
SSS075116S
SSS075120S
SSS075124S
SSS100128S
SSS100132S
SSS100136S
SSS100140S
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
1-44/64
1-48/64
1-40/64
1-48/64
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-8/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-8/64
3-16/64
3-24/64
3-32/64
3-8/64
3-16/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-16/64
4-24/64
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7-8/64
7-16/64
7-24/64
SSS100144S
SSS100148S
SSS125140S
SSS125148S
SSS125152S
SSS125156S
SSS150160S
SSS150200S
SSS150204S
SSS150208S
SSS150212S
SSS150216S
SSS150220S
SSS150224S
SSS200208S
SSS200216S
SSS200224S
SSS200228S
SSS200232S
SSS200236S
SSS200240S
SSS200244S
SSS200248S
SSS200252S
SSS200256S
SSS200260S
SSS200300S
SSS250308S
SSS250316S
SSS250324S
SSS250332S
SSS300308S
SSS300316S
SSS300324S
SSS300328S
SSS300332S
SSS300336S
SSS300340S
SSS300344S
SSS300348S
SSS300352S
SSS300356S
SSS300360S
SSS400400S
SSS400416S
SSS400424S
SSS400432S
SSS400436S
SSS400440S
SSS400444S
SSS400448S
SSS400452S
SSS400456S
SSS400460S
SSS400500S
SSS600616
SSS600624
SSS600632
SSS600640
SSS600648
SSS600656
SSS600700
SSS600708
SSS600716
SSS600724
For a complete listing of
all Ferrules and Sleeves,
go to Section G.
7.20
7.20
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
16.08
16.08
16.08
16.08
16.08
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
®
B
11
B
Fittings for critical application or high pressure Multi-Purpose Hose and Chemical Hose
your multi-purpose hose
applications.
CRIMPNOLOGY NIPPLES
Smooth
End Detail
Features & Benefits
• Designed for use with Campbell
Interlocking Ferrules.
Rounder
Serrations
• Fittings use the same ferrules as
Campbell COBRA Parts C and E,
ChemJoint Couplings, and
Goodyear InstaLock Cam & Groove
Couplings to keep ferrule inventory
low and flexible.
• Interlock groove on fitting
locks ferrule into place for the
ultimate in holding power.
Sharper
Serrations
• Graduated serration pattern
(sharper near the interlock, rounder
near the end, with smooth end detail
to reduce potential failure caused by
abrasion) grips, seals, and protects
hose.
Interlock
Groove
• Shank and ferrule lengths are matched
for performance and to avoid potential
hose tube or cover damage.
• Crimped assemblies are low profile
and eliminate sharp edges from
clamp buckles.
Crimpnology Nipple
Recommended
Hose Attachment
• Interlocking ferrules
Flanges meet
ANSI/ASME B16.5 150 pound class
specifications.
Recommended Use
• Multi-purpose fluid, chemical,
bulk handling
Special Features
• Crimpnology Nipples provide an
excellent fitting solution for mediumpressure applications such as “Frac
Hose”, mud-pump hose, and other
abusive applications.
• Long Shank Crimpnology Nipples
provide excellent sealing and retention
for high-pressure applications
(See ratings chart below).
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
Crimpnology Nipple
Crimpnology Nipple
Long Crimpnology Nipple
Crimpnology Flange (Steel)3
Crimpnology Flange (SS)3
Ferrule
Ferrule
Long Ferrule
Ferrule
Ferrule
Chem/Rubber
Soft
Rubber
Chem/Rubber
Chem/Rubber
–
–
–
–
–
–
–
–
–
–
500
200
–
–
–
2
See footnotes 1, 2, and 4 on Page 1
12
1-1/4 1-1/2
350
175
–
–
–
2
325 300
150 150
1000 1000
285 285
230 230
2-1/2
3
4
6
8
275
125
650
275
230
250
100
600
250
230
250
75
500
250
230
225
–
–
225
–
–
–
–
–
–
B
CRIMPNOLOGY
NIPPLES
GROOVED
Steel
hose
size
1-1/2
2
2-1/2
3
4
6
FLANGE-FLOATING
(150 lb.)
part
number
HAGS-6C
HAGS-8C
HAGS-10C
HAGS-12C
HAGS-16C
HAGS-24C
list
each
29.69
35.62
54.97
63.85
77.22
136.88
316 Stainless
THREADED
Plated Steel
hose
size
1
1-1/4
1-1/2
2
2-1/2
3
4
6
part
number
HAPS-4C
HAPS-5C
HAPS-6C
HAPS-8C
HAPS-10C
HAPS-12C
HAPS-16C
HAPS-24C
list
each
20.78
23.24
22.25
26.46
42.28
50.47
62.38
132.15
1-1/2
2
2-1/2
3
4
HASS-4C
HASS-5C
HASS-6C
HASS-8C
HASS-10C
HASS-12C
HASS-16C
HASS-24C
33.71
47.92
50.47
62.43
108.42
133.62
197.47
730.10
Ductile Iron
hose
size
4
hose
size
4
Steel
part
number
FRAC-16C
Steel
hose
size
1-1/2
2
2-1/2
3
4
6
list
each
74.00
SCH. 80 THREADED LONG SHANK
Steel
part
list
number
each
HALPS-6C
37.05
HALPS-8C
38.16
HALPS-10C 64.25
HALPS-12C 85.56
HALPS-16C 126.32
SQUARE CUT END
Steel
hose
size
1-1/2
2
2-1/2
3
4
part
number
HAS-6C SQ
HAS-8C SQ
HAS-10C SQ
HAS-12C SQ
HAS-16C SQ
list
each
22.54
26.75
40.58
47.53
60.12
list
each
499.00
list
18/skid
469.00
part
number
FHAS-6C
FHAS-8C
FHAS-10C
FHAS-12C
FHAS-16C
FHAS-24C
1-1/2
2
2-1/2
3
4
6
list
each
97.91
97.34
178.94
141.87
181.25
308.57
FHASS-6C
277.73
FHASS-8C
304.82
FHASS-10C 443.42
FHASS-12C 489.72
FHASS-16C 670.11
FHASS-24C 1065.00
TURNBACK
(for use with 150 lb. floating flange)
Steel
hose
size
1-1/2
2
2-1/2
3
4
6
part
number
THAS-6C
THAS-8C
THAS-10C
THAS-12C
THAS-16C
THAS-24C
list
each
46.32
48.59
94.21
100.95
159.68
426.48
316 Stainless
1-1/2
2
2-1/2
3
4
6
THASS-6C
THASS-8C
THASS-10C
THASS-12C
THASS-16C
THASS-24C
part
number
FF150S-6
FF150S-8
FF150S-10
FF150S-12
FF150S-16
FF150S-24
FF150S-32
list
each
34.81
36.75
56.70
61.11
90.83
125.69
208.53
1-1/2
2
2-1/2
3
4
6
FF150SS-6
FF150SS-8
FF150SS-10
FF150SS-12
FF150SS-16
FF150SS-24
162.01
200.92
257.99
314.48
436.17
601.34
316 Stainless
FLANGE-THREADED
(150 lb.)
Steel
npt
size
1-1/2
2
2-1/2
3
4
6
part
number
FT150S-6
FT150S-8
FT150S-10
FT150S-12
FT150S-16
FT150S-24
list
each
52.64
62.10
64.39
73.34
82.01
151.25
316 Stainless
316 Stainless
Use only heavy duty
FRAC ferrules on page 14
hose
size
1-1/2
2
2-1/2
3
4
part
number
206S-16C
part
number
206S-16C
FLANGED
(with 150 lb. fixed flange)
SCH. 80 THREADED
(for 400 psi frac hose)
hose
size
4
63.85
78.69
159.87
187.08
245.74
206 HOSE UNION
(complete set)
316 Stainless
1
1-1/4
1-1/2
2
2-1/2
3
4
6
HAGSS-6C
HAGSS-8C
HAGSS-10C
HAGSS-12C
HAGSS-16C
Steel
hose
size
1-1/2
2
2-1/2
3
4
6
8
98.28
183.57
246.13
328.56
466.62
875.00
1-1/2
2
2-1/2
3
4
6
FT150SS-6
FT150SS-8
FT150SS-10
FT150SS-12
FT150SS-16
FT150SS-24
169.40
212.52
256.97
306.54
429.49
659.78
FLANGE-SLIP ON
(150 lb.)
Steel
npt
size
1-1/2
2
2-1/2
3
4
6
part
number
FS150S-6
FS150S-8
FS150S-10
FS150S-12
FS150S-16
FS150S-24
list
each
32.87
34.39
59.48
56.18
73.24
103.74
316 Stainless
1-1/2
2
2-1/2
3
4
6
FS150SS-6
FS150SS-8
FS150SS-10
FS150SS-12
FS150SS-16
FS150SS-24
135.80
164.90
359.86
291.00
378.30
582.00
FERRULES FOR CRIMPNOLOGY NIPPLES
13
FERRULES
304 Stainless
FERRULES
for crimpnology nipples
Plated Steel
hose
size
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
6
6
6
6
14
ferrule
i.d.
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-52/64
1-52/64
1-56/64
1-60/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-8/64
4-16/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
6-40/64
6-56/64
7-8/64
7-24/64
part
number
FPS100132
FPS100136
FPS100140
FPS100144
FPS100148
FPS100152
FPS125152
FPS125156
FPS125160
FPS150160
FPS150200
FPS150204
FPS150208
FPS150212
FPS150216
FPS150220
FPS150224
FPS200232
FPS200236
FPS200240
FPS200244
FPS200248
FPS200252
FPS200256
FPS200260
FPS250308
FPS250312
FPS250316
FPS250320
FPS250328
FPS300336
FPS300340
FPS300344
FPS300348
FPS300352
FPS300356
FPS300360
FPS300400
FPS300408
FPS300416
FPS400436
FPS400440
FPS400444
FPS400448
FPS400452
FPS400456
FPS400460
FPS400500
FPS400504
FPS600640
FPS600656
FPS600708
FPS600724
list
each
9.86
9.86
9.86
9.86
9.86
9.86
10.25
10.25
10.25
11.24
11.24
11.24
11.24
11.24
11.24
11.24
11.24
12.56
12.56
12.56
12.56
12.56
12.56
12.56
12.56
16.72
16.72
16.72
16.72
16.72
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
22.31
22.31
22.31
22.31
22.31
22.31
22.31
22.31
22.31
49.99
49.99
49.99
49.99
hose
size
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
6
6
6
ferrule
i.d.
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-52/64
1-52/64
1-56/64
1-60/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
6-56/64
7-8/64
7-24/64
part
number
FSS100132
FSS100136
FSS100140
FSS100144
FSS100148
FSS100152
FSS125152
FSS125156
FSS125160
FSS150160
FSS150200
FSS150204
FSS150208
FSS150212
FSS150216
FSS150220
FSS150224
FSS200232
FSS200236
FSS200240
FSS200244
FSS200248
FSS200252
FSS200256
FSS200260
FSS250308
FSS250312
FSS250316
FSS250320
FSS250328
FSS300336
FSS300340
FSS300344
FSS300348
FSS300352
FSS300356
FSS300360
FSS300400
FSS400436
FSS400440
FSS400444
FSS400448
FSS400452
FSS400456
FSS400460
FSS400500
FSS400504
FSS600656
FSS600708
FSS600724
list
each
9.85
9.85
9.85
9.85
9.85
9.85
11.84
11.84
11.84
15.45
15.45
15.45
15.45
15.45
15.45
15.45
15.45
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
26.69
26.69
26.69
26.69
26.69
28.08
28.08
28.08
28.08
28.08
28.08
28.08
28.08
65.18
65.18
65.18
65.18
65.18
65.18
65.18
65.18
65.18
82.45
82.45
82.45
LONG SHANK FERRULES
for long shank crimpnology nipples
Plated Steel
hose
size
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
ferrule
i.d.
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-8/64
4-16/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
5-12/64
5-20/64
5-28/64
part
list
number
each
FPS150160L 16.60
FPS150200L 16.60
FPS150204L 16.60
FPS150208L 16.60
FPS150212L 16.60
FPS150216L 16.60
FPS150220L 16.60
FPS150224L 16.60
FPS200232L 20.16
FPS200236L 20.16
FPS200240L 20.16
FPS200244L 20.16
FPS200248L 20.16
FPS200252L 20.16
FPS200256L 20.16
FPS200260L 20.16
FPS250308L 27.72
FPS250312L 27.72
FPS250316L 27.72
FPS250320L 27.72
FPS250328L 27.72
FPS300336L 27.88
FPS300340L 27.88
FPS300344L 27.88
FPS300348L 27.88
FPS300352L 27.88
FPS300356L 27.88
FPS300360L 27.88
FPS300400L 27.88
FPS300408L 27.88
FPS300416L 27.88
FPS400440L 37.85
FPS400444L 37.85
FPS400448L 37.85
FPS400452L 37.85
FPS400456L 37.85
FPS400460L 37.85
FPS400500L 37.85
FPS400504L 37.85
FPS400512L 37.85
FPS400520L 37.85
FPS400528L 37.85
Plated Steel-Heavy Duty
(for FRAC-16 fittings only)
hose
size
4
4
4
4
4
ferrule
i.d.
4-48/64
4-52/64
4-56/64
4-60/64
5
part
number
FPS400448F
FPS400452F
FPS400456F
FPS400460F
FPS400500F
list
each
31.20
31.20
31.20
31.20
31.20
go to Section G.
®
C
15
C
Cam & Groove Couplings for Liquid, Bulk, and Chemical Transfer
“CAMPBELL COBRA” VS.
“STANDARD COBRA”
Campbell
COBRA
“COBRA” is the trade name for our entire
line of cam & groove couplings. “Campbell
COBRA” is the upgraded versions of Parts C
and E. Although imported, Campbell
COBRA C’s and E’s are designed by
Campbell and produced to strict
Campbell specifications.
Features & Benefits
Ferrule
zone:
3-15/16”
• Designed for use with Campbell
Interlocking Ferrules.
• 360° interlock groove on fitting locks
ferrule into place for the ultimate in
holding power.
• Shank and ferrule lengths are matched for
performance and to avoid potential hose
tube or hose cover damage (right).
Campbell Cobra Part C and matching
Campbell Interlocking Ferrule
• Serrations designed to grip, seal, and
protect hose when crimped. Note:
Traditional “two bump” designs are
for banding, not crimping. Campbell
does not recommend crimping on
“two bump” shanks.
Ferrule
length:
3-15/16”
• Crimped assemblies are low profile and
eliminate sharp edges from clamp buckles.
• Couplings use the same ferrules as
Crimpnology Nipples, ChemJoint
Couplings, and Goodyear InstaLock Cam
& Groove Couplings to keep your inventory
as flexible as possible.
Special Feature
• Designed to couple and interchange
with couplings made to ASTM F1122,
CID A-A-59326, MIL-C-27487.
• Locking handles (right)
can be purchased
assembled onto the
coupling or as a kit and
retrofitted onto existing
inventory ... another
easy and cost-effective
way to keep inventory
flexible.
Recommended
Hose Attachment
your liquid, bulk, and chemical
transfer hose applications.
Recommended Use
• Multi-purpose liquid, chemical,
bulk handling
Locking Handle
Fitting/Coupling
Campbell COBRA Cam & Groove (SS)
Campbell COBRA Cam & Groove (Alum)4
4
Hose Size
Attachment
Hose Type
1/2
3/4
1
Ferrule
Ferrule
Chem/Rubber
Chem/Rubber
–
–
–
–
250
–
2
16
1-1/4 1-1/2
–
–
250
225
2
2-1/2
3
4
6
8
250
200
150
150
150
125
100
75
–
–
–
–
C
CAMPBELL COBRA
CAM & GROOVE
COUPLINGS
Aluminum
1-1/2
2
3
4
CL-AL-150C
CL-AL-200C
CL-AL-300C
CL-AL-400C
65.36
71.35
88.09
98.63
PART A
PART E
(with ferrule interlock)
316 Stainless
316 Stainless
hose
size
1
1-1/2
2
2-1/2
3
4
316 Stainless
hose
size
1
1-1/2
2
2-1/2
3
4
part
list
number
each
C-316-100C 25.62
C-316-150C 48.36
C-316-200C 69.58
C-316-250C 92.49
C-316-300C 123.14
C-316-400C 189.99
Aluminum
1-1/2
2
2-1/2
3
4
C-AL-150C
C-AL-200C
C-AL-250C
C-AL-300C
C-AL-400C
12.19
15.05
20.14
25.04
34.61
Brass
1
1-1/2
2
3
4
C-BR-100C 30.31
C-BR-150C 45.55
C-BR-200C 59.14
C-BR-300C 114.71
C-BR-400C 159.60
Steel
(investment cast)
1
1-1/2
2
3
4
C-S-100C
C-S-150C
C-S-200C
C-S-300C
C-S-400C
21.95
30.97
36.52
60.40
93.85
PART C - locking handles
316 Stainless
hose
size
1
1-1/2
2
3
4
part
list
number
each
E-316-100C 19.30
E-316-150C 37.71
E-316-200C 60.09
E-316-250C 80.58
E-316-300C 105.32
E-316-400C 170.58
Aluminum
PART C
part
list
number
each
CL-316-100C 53.92
CL-316-150C 80.07
CL-316-200C 101.26
CL-316-300C 172.85
CL-316-400C 247.04
1-1/2
2
2-1/2
3
4
E-AL-150C
E-AL-200C
E-AL-250C
E-AL-300C
E-AL-400C
6.08
7.89
12.83
14.08
23.10
Brass
1
1-1/2
2
3
4
E-BR-100C
20.43
E-BR-150C
34.30
E-BR-200C
47.74
E-BR-300C
94.05
E-BR-400C 144.21
Steel
(investment cast)
1
1-1/2
2
3
4
E-S-100C
E-S-150C
E-S-200C
E-S-300C
E-S-400C
14.58
19.10
29.43
51.65
69.56
LOCKING HANDLE KIT
(for Campbell Cobra C’s only)
Ring/Pin/Lock: Stainless
Handle: Investment Cast
Stainless
size
1
1-1/2
2
2-1/2
3
4
part
number
LHRPSS-100
LHRPSS-200
LHRPSS-200
LHRPSS-200
LHRPSS-300
LHRPSS-300
list
each
18.30
20.20
20.20
20.20
23.98
23.98
CONE STRAINERS
(for use with Part C’s)
Stainless
hose
size
2
3
4
6
part
number
CGSS-8
CGSS-12
CGSS-16
CGSS-24
STANDARD COBRA
CAM & GROOVE
COUPLINGS
list
each
39.95
33.65
40.35
61.95
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
part
number
A-316-50
A-316-75
A-316-100
A-316-125
A-316-150
A-316-200
A-316-250
A-316-300
A-316-400
A-316-500
A-316-600
A-316-800
list
each
12.60
12.64
15.59
22.21
26.73
31.56
56.52
61.57
116.38
189.34
236.88
543.40
304 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
A-SS-50
A-SS-75
A-SS-100
A-SS-125
A-SS-150
A-SS-200
A-SS-250
A-SS-300
A-SS-400
A-SS-500
A-SS-600
A-SS-800
9.80
9.79
11.78
17.31
19.97
23.28
41.47
44.74
88.42
149.77
182.74
469.30
Aluminum
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
A-AL-50
A-AL-75
A-AL-100
A-AL-125
A-AL-150
A-AL-200
A-AL-250
A-AL-300
A-AL-400
A-AL-500
A-AL-600
A-AL-800
3.96
3.61
4.12
5.67
4.69
5.52
10.56
10.15
16.73
34.96
35.01
143.10
Brass
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
A-BR-50
A-BR-75
A-BR-100
A-BR-125
A-BR-150
A-BR-200
A-BR-250
A-BR-300
A-BR-400
A-BR-500
A-BR-600
9.96
9.78
11.09
16.30
17.14
23.20
37.27
44.81
77.30
166.30
222.09
FERRULES FOR CAMPBELL COBRA COUPLINGS (PG. 22)
17
PHONE 800-367-3678
FAX 800-367-3670
Ductile Iron
1-1/2
2
2-1/2
3
4
5
A-DI-150
A-DI-200
A-DI-250
A-DI-300
A-DI-400
A-DI-500
Poly-Glass
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
3
4
part
number
A-PP-50
A-PP-75
A-PP-100
A-PP-125
A-PP-150
A-PP-200
A-PP-300
A-PP-400
14.20
17.04
POR
26.64
43.07
58.60
list
each
2.25
2.25
2.66
4.04
4.08
4.81
8.53
20.71
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
A-NY-50
A-NY-75
A-NY-100
A-NY-125
A-NY-150
A-NY-200
A-NY-300
A-NY-400
3.98
3.98
4.70
4.90
5.27
6.12
13.36
32.29
PART B
316 Stainless
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
number
B-316-50
B-316-75
B-316-100
B-316-125
B-316-150
B-316-200
B-316-250
B-316-300
B-316-400
B-316-500
B-316-600
list
each
20.36
20.38
26.75
38.01
45.22
53.69
69.30
100.93
152.47
248.81
341.76
304 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
B-SS-50
B-SS-75
B-SS-100
B-SS-125
B-SS-150
B-SS-200
B-SS-250
B-SS-300
B-SS-400
B-SS-500
B-SS-600
17.30
17.27
21.15
29.50
32.97
40.76
51.86
74.93
113.15
181.47
251.62
Aluminum
18
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
B-AL-50
B-AL-75
B-AL-100
B-AL-125
B-AL-150
B-AL-200
B-AL-250
B-AL-300
B-AL-400
B-AL-500
B-AL-600
B-AL-800
8.77
7.81
9.31
11.69
10.99
12.42
20.88
21.58
27.15
58.03
65.46
281.37
Aluminum
(with stainless handles)
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
B-ALS-75 244.07
B-ALS-100
8.51
B-ALS-125
7.57
B-ALS-150
9.03
B-ALS-200 11.34
B-ALS-250 10.66
B-ALS-300 12.04
B-ALS-400 20.26
B-ALS-600 20.93
Brass
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
number
B-BR-50
B-BR-75
B-BR-100
B-BR-125
B-BR-150
B-BR-200
B-BR-250
B-BR-300
B-BR-400
B-BR-500
B-BR-600
list
each
17.95
17.85
21.59
28.28
30.66
38.07
54.14
74.18
105.24
258.70
304.92
Ductile Iron
1-1/2
2
2-1/2
3
4
5
B-DI-150
B-DI-200
B-DI-250
B-DI-300
B-DI-400
B-DI-500
26.13
27.32
POR
47.80
64.19
91.13
Poly-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
B-PP-50
B-PP-75
B-PP-100
B-PP-125
B-PP-150
B-PP-200
B-PP-300
B-PP-400
6.95
6.95
7.41
9.79
10.93
12.88
21.11
38.27
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
B-NY-50
B-NY-75
B-NY-100
B-NY-125
B-NY-150
B-NY-200
B-NY-300
B-NY-400
9.26
9.61
9.98
14.33
12.98
16.23
28.38
39.83
PART C
(for use with sleeves or bands)
316 Stainless
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
list
number
each
C-316-50
20.15
C-316-75
18.42
C-316-100 23.93
C-316-125 36.41
C-316-150 38.29
C-316-200 52.58
C-316-250 78.58
C-316-300 94.00
C-316-400 148.26
C-316-500 324.72
C-316-600 378.89
304 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
C-SS-50
C-SS-75
C-SS-100
C-SS-125
C-SS-150
C-SS-200
C-SS-250
C-SS-300
C-SS-400
C-SS-500
C-SS-600
C-SS-800
Aluminum
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
part
number
C-AL-50
C-AL-75
C-AL-100
C-AL-125
C-AL-150
C-AL-200
C-AL-250
C-AL-300
C-AL-400
C-AL-500
C-AL-600
C-AL-800
16.73
15.04
20.09
29.88
34.72
45.69
63.96
88.14
129.19
236.86
278.33
771.86
list
each
6.88
6.84
8.14
12.11
10.89
12.76
19.70
22.78
33.42
62.16
75.75
283.34
Aluminum
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
C-ALS-75
C-ALS-100
C-ALS-125
C-ALS-150
C-ALS-200
C-ALS-250
C-ALS-300
C-ALS-400
C-ALS-600
6.67
6.63
7.89
11.75
10.56
12.37
19.11
22.10
32.42
Brass
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
C-BR-50
C-BR-75
C-BR-100
C-BR-125
C-BR-150
C-BR-200
C-BR-250
C-BR-300
C-BR-400
C-BR-500
C-BR-600
16.88
17.10
23.73
31.21
32.17
42.79
56.14
75.42
111.23
268.26
353.57
Ductile Iron
1-1/2
2
2-1/2
3
4
5
C-DI-150
C-DI-200
C-DI-250
C-DI-300
C-DI-400
C-DI-500
26.38
31.09
POR
51.44
76.17
117.97
Poly-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
C-PP-50
C-PP-75
C-PP-100
C-PP-125
C-PP-150
C-PP-200
C-PP-300
C-PP-400
7.18
7.18
8.16
10.44
11.89
13.90
21.11
39.89
C
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
C-NY-50
C-NY-75
C-NY-100
C-NY-125
C-NY-150
C-NY-200
C-NY-300
C-NY-400
Brass
7.43
7.81
8.74
14.74
15.47
17.09
27.92
44.43
PART D
316 Stainless
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
number
D-316-50
D-316-75
D-316-100
D-316-125
D-316-150
D-316-200
D-316-250
D-316-300
D-316-400
D-316-500
D-316-600
list
each
20.38
20.38
26.71
38.67
47.09
58.46
83.60
105.56
162.83
302.72
330.34
304 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
D-SS-50
D-SS-75
D-SS-100
D-SS-125
D-SS-150
D-SS-200
D-SS-250
D-SS-300
D-SS-400
D-SS-500
D-SS-600
17.58
17.58
21.15
31.13
37.25
45.27
64.37
86.73
127.49
214.37
250.91
Aluminum
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
D-AL-50
D-AL-75
D-AL-100
D-AL-125
D-AL-150
D-AL-200
D-AL-250
D-AL-300
D-AL-400
D-AL-500
D-AL-600
D-AL-800
9.98
8.16
9.31
12.73
11.57
13.59
21.61
21.97
31.62
59.48
72.93
266.47
Aluminum
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
D-ALS-75
D-ALS-100
D-ALS-125
D-ALS-150
D-ALS-200
D-ALS-250
D-ALS-300
D-ALS-400
D-ALS-600
9.68
7.92
9.03
12.35
11.22
13.18
20.96
21.31
30.68
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
D-BR-50
D-BR-75
D-BR-100
D-BR-125
D-BR-150
D-BR-200
D-BR-250
D-BR-300
D-BR-400
D-BR-500
D-BR-600
Aluminum
17.43
17.83
22.02
32.69
31.31
38.84
55.77
70.54
110.74
236.03
317.75
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
Ductile Iron
1-1/2
2
2-1/2
3
4
5
D-DI-150
D-DI-200
D-DI-250
D-DI-300
D-DI-400
D-DI-500
Poly-Glass
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
3
4
part
number
D-PP-50
D-PP-75
D-PP-100
D-PP-125
D-PP-150
D-PP-200
D-PP-300
D-PP-400
Brass
26.38
40.66
POR
50.06
75.17
102.74
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
list
each
7.37
7.37
8.16
10.21
11.25
13.70
23.80
41.73
D-NY-50
D-NY-75
D-NY-100
D-NY-125
D-NY-150
D-NY-200
D-NY-300
D-NY-400
1-1/2
2
2-1/2
3
4
5
8.15
8.51
10.14
14.04
13.76
18.51
29.17
45.58
1/2
3/4
1
1-1/4
1-1/2
2
3
4
316 Stainless
part
list
number
each
E-316-50
10.31
E-316-75
11.11
E-316-100 18.07
E-316-125 26.28
E-316-150 29.95
E-316-200 45.14
E-316-250 68.46
E-316-300 91.17
E-316-400 138.83
E-316-500 256.56
E-316-600 343.69
304 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
E-SS-50
E-SS-75
E-SS-100
E-SS-125
E-SS-150
E-SS-200
E-SS-250
E-SS-300
E-SS-400
E-SS-500
E-SS-600
8.85
8.85
12.99
18.97
23.90
35.85
51.30
73.52
112.31
187.15
248.95
list
each
9.51
12.42
13.37
18.84
22.37
32.00
45.88
60.80
99.34
239.08
314.20
E-DI-150
E-DI-200
E-DI-250
E-DI-300
E-DI-400
E-DI-500
15.31
25.06
POR
43.96
59.24
95.38
Poly-Glass
PART E
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
number
E-BR-50
E-BR-75
E-BR-100
E-BR-125
E-BR-150
E-BR-200
E-BR-250
E-BR-300
E-BR-400
E-BR-500
E-BR-600
4.11
4.00
4.42
6.62
5.08
6.64
12.22
13.56
22.52
47.50
56.48
172.54
Ductile Iron
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
E-AL-50
E-AL-75
E-AL-100
E-AL-125
E-AL-150
E-AL-200
E-AL-250
E-AL-300
E-AL-400
E-AL-500
E-AL-600
E-AL-800
E-PP-50
E-PP-75
E-PP-100
E-PP-125
E-PP-150
E-PP-200
E-PP-300
E-PP-400
2.60
2.60
3.08
4.37
4.44
4.70
9.14
18.13
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
E-NY-50
E-NY-75
E-NY-100
E-NY-125
E-NY-150
E-NY-200
E-NY-300
E-NY-400
3.28
3.62
3.98
5.63
5.73
7.95
15.20
28.11
PART F
316 Stainless
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
list
number
each
F-316-50
13.92
F-316-75
13.92
F-316-100 20.38
F-316-125 29.94
F-316-150 35.85
F-316-200 47.64
F-316-250 68.16
F-316-300 91.52
F-316-400 161.23
F-316-500 261.40
F-316-600 355.77
19
PHONE 800-367-3678
FAX 800-367-3670
304 Stainless
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
number
F-SS-50
F-SS-75
F-SS-100
F-SS-125
F-SS-150
F-SS-200
F-SS-250
F-SS-300
F-SS-400
F-SS-500
F-SS-600
PART DC
list
each
12.79
12.23
15.50
22.62
28.25
35.27
48.92
70.57
121.58
191.01
264.14
Aluminum
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
F-AL-50
F-AL-75
F-AL-100
F-AL-125
F-AL-150
F-AL-200
F-AL-250
F-AL-300
F-AL-400
F-AL-500
F-AL-600
F-AL-800
5.44
4.47
4.76
7.82
5.91
6.99
13.89
14.62
20.99
45.89
51.53
200.32
Brass
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
F-BR-50
F-BR-75
F-BR-100
F-BR-125
F-BR-150
F-BR-200
F-BR-250
F-BR-300
F-BR-400
F-BR-500
F-BR-600
11.19
11.19
13.99
20.94
21.99
30.60
49.29
62.69
98.42
202.82
267.41
Ductile Iron
1-1/2
2
2-1/2
3
4
5
F-DI-150
F-DI-200
F-DI-250
F-DI-300
F-DI-400
F-DI-500
17.29
21.99
POR
33.82
53.64
77.27
Poly-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
F-PP-50
F-PP-75
F-PP-100
F-PP-125
F-PP-150
F-PP-200
F-PP-300
F-PP-400
2.60
2.60
2.89
4.08
4.32
4.70
10.05
18.13
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
20
F-NY-50
F-NY-75
F-NY-100
F-NY-125
F-NY-150
F-NY-200
F-NY-300
F-NY-400
3.28
3.45
3.73
5.41
5.18
7.61
15.42
26.20
Ductile Iron
316 Stainless
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
part
number
DC-316-50
DC-316-75
DC-316-100
DC-316-125
DC-316-150
DC-316-200
DC-316-250
DC-316-300
DC-316-400
DC-316-500
DC-316-600
list
each
18.15
18.28
22.21
30.23
34.72
42.04
60.03
80.13
110.63
215.50
286.34
304 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
DC-SS-50
DC-SS-75
DC-SS-100
DC-SS-125
DC-SS-150
DC-SS-200
DC-SS-250
DC-SS-300
DC-SS-400
DC-SS-500
DC-SS-600
14.19
14.75
17.29
24.82
26.30
32.47
45.95
64.95
89.26
163.20
205.36
Aluminum
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
DC-AL-50
DC-AL-75
DC-AL-100
DC-AL-125
DC-AL-150
DC-AL-200
DC-AL-250
DC-AL-300
DC-AL-400
DC-AL-500
DC-AL-600
DC-AL-800
6.91
7.52
7.93
12.92
9.88
11.42
16.04
18.97
23.95
40.60
60.45
242.85
Aluminum
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
DC-ALS-75
DC-ALS-100
DC-ALS-125
DC-ALS-150
DC-ALS-200
DC-ALS-250
DC-ALS-300
DC-ALS-400
DC-ALS-600
6.71
7.29
7.69
12.53
9.59
11.08
15.56
18.40
23.32
Brass
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
DC-BR-50
DC-BR-75
DC-BR-100
DC-BR-125
DC-BR-150
DC-BR-200
DC-BR-250
DC-BR-300
DC-BR-400
DC-BR-500
DC-BR-600
1-1/2
2
2-1/2
3
4
5
DC-DI-150
DC-DI-200
DC-DI-250
DC-DI-300
DC-DI-400
DC-DI-500
22.22
24.49
POR
39.65
55.20
84.09
Poly-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
DC-PP-50
DC-PP-75
DC-PP-100
DC-PP-125
DC-PP-150
DC-PP-200
DC-PP-300
DC-PP-400
7.01
7.01
7.60
9.79
10.73
12.89
20.95
34.28
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
DC-NY-50
DC-NY-75
DC-NY-100
DC-NY-125
DC-NY-150
DC-NY-200
DC-NY-300
DC-NY-400
8.16
8.53
9.60
13.65
14.21
16.18
25.22
36.26
PART DP
316 Stainless
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
part
list
number
each
DP-316-50
8.30
DP-316-75
8.30
DP-316-100 10.34
DP-316-125 17.58
DP-316-150 21.37
DP-316-200 31.90
DP-316-250 46.39
DP-316-300 53.57
DP-316-400 91.79
DP-316-600 239.67
304 Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
DP-SS-50
DP-SS-75
DP-SS-100
DP-SS-125
DP-SS-150
DP-SS-200
DP-SS-250
DP-SS-300
DP-SS-400
DP-SS-600
8.30
6.60
7.93
13.92
15.59
23.20
35.27
40.06
67.34
164.61
Aluminum
15.87
16.92
20.26
26.13
28.42
34.77
42.45
63.80
85.90
198.05
227.36
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
DP-AL-50
DP-AL-75
DP-AL-100
DP-AL-125
DP-AL-150
DP-AL-200
DP-AL-250
DP-AL-300
DP-AL-400
DP-AL-500
DP-AL-600
3.92
3.73
3.99
4.66
3.98
4.66
9.58
9.06
14.51
26.59
30.25
C
Brass
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
DOUBLE D
DP-BR-50
DP-BR-75
DP-BR-100
DP-BR-125
DP-BR-150
DP-BR-200
DP-BR-250
DP-BR-300
DP-BR-400
DP-BR-500
DP-BR-600
9.80
9.90
12.18
14.15
14.42
20.36
28.26
34.56
52.48
137.09
163.47
Ductile Iron
1-1/2
2
2-1/2
3
4
5
DP-DI-150
DP-DI-200
DP-DI-250
DP-DI-300
DP-DI-400
DP-DI-500
12.36
16.05
POR
21.82
31.23
52.28
Poly-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
DP-PP-50
DP-PP-75
DP-PP-100
DP-PP-125
DP-PP-150
DP-PP-200
DP-PP-300
DP-PP-400
2.53
2.43
2.64
3.01
3.19
4.07
7.85
14.19
Ny-Glass
1/2
3/4
1
1-1/4
1-1/2
2
3
4
DP-NY-50
DP-NY-75
DP-NY-100
DP-NY-125
DP-NY-150
DP-NY-200
DP-NY-300
DP-NY-400
3.28
3.62
3.84
4.17
4.65
5.36
13.39
21.19
adapter
x adapter
1
1-1/2
1-1/2 x 2
2
2x3
3
3x4
4
part
number
AA-316-100
AA-316-150
AA-316-1520
AA-316-200
AA-316-2030
AA-316-300
AA-316-3040
AA-316-400
list
each
67.09
85.68
102.13
108.31
139.90
187.98
229.62
289.79
Aluminum
1
1-1/2
2
2x3
2-1/2
3
3x4
4
AA-AL-100
AA-AL-150
AA-AL-200
AA-AL-2030
AA-AL-250
AA-AL-300
AA-AL-3040
AA-AL-400
13.60
15.79
17.88
25.24
26.26
33.84
44.16
44.90
Brass
1-1/2
2
2-1/2
3
4
AA-BR-150
AA-BR-200
AA-BR-250
AA-BR-300
AA-BR-400
part
number
DD-316-150
DD-316-200
DD-316-300
DD-316-400
list
each
111.32
143.65
222.37
299.54
Aluminum
1-1/2
2
3
4
DD-AL-150
DD-AL-200
DD-AL-300
DD-AL-400
47.08
52.55
73.66
97.89
JUMP SIZE COUPLER X
ADAPTER
316 Stainless
coupler
x adapter
2 x 1-1/2
3x2
4x3
6x4
part
number
DA-316-2015
DA-316-3020
DA-316-4030
DA-316-6040
list
each
131.05
162.04
241.03
432.36
Aluminum
1-1/2 x 1
1-1/2 x 2
2 x 1-1/2
2x3
2x4
3 x 1-1/2
3x2
3x4
4x2
4x3
4x6
6x4
DA-AL-1510
DA-AL-1520
DA-AL-2015
DA-AL-2030
DA-AL-2040
DA-AL-3015
DA-AL-3020
DA-AL-3040
DA-AL-4020
DA-AL-4030
DA-AL-4060
DA-AL-6040
45.29
49.00
44.03
41.83
79.27
61.42
51.96
67.15
70.27
65.59
131.56
145.46
DA-BR-2030
DA-BR-3020
DA-BR-4020
DA-BR-4030
DA-BR-6040
153.86
186.46
260.28
270.40
454.18
Brass
SPOOL ADAPTER
316 Stainless
316 Stainless
coupler
size
1-1/2
2
3
4
JUMP SIZE C
62.49
78.78
111.63
134.14
185.67
2x3
3x2
4x2
4x3
6x4
JUMP SIZE A
Aluminum
adapter x part
female npt number
2x3
A-AL-2030
3x2
A-AL-3020
3x4
A-AL-3040
4x3
A-AL-4030
4x6
A-AL-4060
6x4
A-AL-6040
list
each
35.15
34.66
59.60
54.33
139.35
139.35
JUMP SIZE B
Aluminum
coupler
x male npt
1-1/2 x 1
2 x 1-1/2
3x2
3x4
4x3
part
number
B-AL-1510
B-AL-2015
B-AL-3020
B-AL-3040
B-AL-4030
list
each
65.63
44.66
46.34
87.66
86.56
Aluminum
coupler
x hose
3x2
3x4
4x3
part
number
C-AL-3020
C-AL-3040
C-AL-4030
list
each
57.83
88.25
77.45
JUMP SIZE D
Aluminum
coupler x
female npt
1-1/2 x 1
2 x 1-1/2
3x2
4x3
part
number
D-AL-1510
D-AL-2015
D-AL-3020
D-AL-4030
list
each
44.61
44.61
54.56
82.95
JUMP SIZE E
Aluminum
adapter x
hose
2 x 1-1/2
2 x 2-1/2
2x3
3x2
3 x 2-1/2
3x4
4x2
4x3
part
number
E-AL-2015
E-AL-2025
E-AL-2030
E-AL-3020
E-AL-3025
E-AL-3040
E-AL-4020
E-AL-4030
list
each
14.41
19.25
21.55
29.19
31.58
36.35
33.65
43.00
JUMP SIZE F
Aluminum
adapter x
male npt
3 x 1-1/2
3x2
3x4
part
number
F-AL-3015
F-AL-3020
F-AL-3040
list
each
46.13
44.40
64.29
HANDLE, RING AND PIN
Ring/Pin: Stainless
Handle: Investment Cast
Stainless
size
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
part
number
HRPSS-75
HRPSS-100
HRPSS-200
HRPSS-200
HRPSS-200
HRPSS-200
HRPSS-300
HRPSS-300
HRPSS-600
list
each
4.04
4.04
11.52
11.52
11.52
11.52
14.71
14.71
40.62
21
PHONE 800-367-3678
FAX 800-367-3670
Ring/Pin: Steel
Handle: Forged Brass
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
HRPB-75
HRPB-100
HRPB-200
HRPB-200
HRPB-200
HRPB-200
HRPB-300
HRPB-300
HRPB-600
3.68
5.42
5.97
5.97
5.97
5.97
8.08
8.08
34.27
FERRULES
for Campbell Cobra Parts C and E
GASKET
Buna-N
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
part
number
BG-50
BG-75
BG-100
BG-125
BG-150
BG-200
BG-250
BG-300
BG-400
BG-500
BG-600
BG-800
list
each
0.68
0.68
0.68
0.76
0.76
0.76
0.90
0.97
1.36
3.41
3.67
17.08
1
1-1/2
2
2-1/2
3
4
VG-100
VG-150
VG-200
VG-250
VG-300
VG-400
6.46
9.06
9.61
12.91
15.33
23.06
Viton®
Teflon® (Teflon®
Encapsulated Viton®)
1
1-1/2
2
2-1/2
3
4
22
304 Stainless
FERRULES
TG-100
TG-150
TG-200
TG-250
TG-300
TG-400
36.57
47.82
54.27
54.27
61.95
85.61
Plated Steel
hose
size
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
6
6
6
6
ferrule
i.d.
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-8/64
4-16/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
6-40/64
6-56/64
7-8/64
7-24/64
part
number
FPS150160
FPS150200
FPS150204
FPS150208
FPS150212
FPS150216
FPS150220
FPS150224
FPS200232
FPS200236
FPS200240
FPS200244
FPS200248
FPS200252
FPS200256
FPS200260
FPS250308
FPS250312
FPS250316
FPS250320
FPS250328
FPS300336
FPS300340
FPS300344
FPS300348
FPS300352
FPS300356
FPS300360
FPS300400
FPS300408
FPS300416
FPS400436
FPS400440
FPS400444
FPS400448
FPS400452
FPS400456
FPS400460
FPS400500
FPS400504
FPS600640
FPS600656
FPS600708
FPS600724
list
each
11.24
11.24
11.24
11.24
11.24
11.24
11.24
11.24
12.56
12.56
12.56
12.56
12.56
12.56
12.56
12.56
16.72
16.72
16.72
16.72
16.72
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
22.31
22.31
22.31
22.31
22.31
22.31
22.31
22.31
22.31
49.99
49.99
49.99
49.99
hose
size
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
6
6
6
ferrule
i.d.
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-52/64
1-52/64
1-56/64
1-60/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-8/64
4-16/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
6-56/64
7-8/64
7-24/64
part
number
FSS100132
FSS100136
FSS100140
FSS100144
FSS100148
FSS100152
FSS125152
FSS125156
FSS125160
FSS150160
FSS150200
FSS150204
FSS150208
FSS150212
FSS150216
FSS150220
FSS150224
FSS200232
FSS200236
FSS200240
FSS200244
FSS200248
FSS200252
FSS200256
FSS200260
FSS250308
FSS250312
FSS250316
FSS250320
FSS250328
FSS300336
FSS300340
FSS300344
FSS300348
FSS300352
FSS300356
FSS300360
FSS300400
FSS300408
FSS300416
FSS400436
FSS400440
FSS400444
FSS400448
FSS400452
FSS400456
FSS400460
FSS400500
FSS400504
FSS600656
FSS600708
FSS600724
go to Section G.
list
each
9.85
9.85
9.85
9.85
9.85
9.85
11.84
11.84
11.84
15.45
15.45
15.45
15.45
15.45
15.45
15.45
15.45
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
28.08
28.08
28.08
28.08
28.08
28.08
28.08
28.08
28.08
28.08
65.18
65.18
65.18
65.18
65.18
65.18
65.18
65.18
65.18
82.45
82.45
82.45
C
SLEEVES
SLEEVES
for Standard or Campbell Cobra Parts C and E
Plated Steel
hose
size
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2
sleeve
i.d.
1-8/64
1-12/64
1-16/64
1-20/64
1-24/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-56/64
2
1-48/64
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-2/64
part
number
SPS075108
SPS075112
SPS075116
SPS075120
SPS075124
SPS100116
SPS100120
SPS100124
SPS100128
SPS100132
SPS100136
SPS100140
SPS100144
SPS100148
SPS125156
SPS125200
SPS150148
SPS150152
SPS150156
SPS150160
SPS150200
SPS150204
SPS150208
SPS150212
SPS150216
SPS150220
SPS150224
SPS200216
SPS200224
SPS200228
SPS200232
SPS200236
SPS200240
SPS200244
SPS200248
SPS200252
SPS200256
SPS200260
SPS200300
SSS200302
list
each
4.81
4.81
4.81
4.81
4.81
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
3
3-8/64
3-16/64
3-24/64
3-32/64
3-34/64
3-16/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-2/64
4-16/64
4-24/64
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-2/64
5-36/64
5-48/64
5-60/64
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7-8/64
7-16/64
7-24/64
8-16/64
8-32/64
8-48/64
9
9-16/64
9-32/64
9-48/64
SPS250300
SPS250308
SPS250316
SPS250324
SPS250332
SPS250334
SPS300316
SPS300324
SPS300328
SPS300332
SPS300336
SPS300340
SPS300344
SPS300348
SPS300352
SPS300356
SPS300360
SPS300400
SPS300402
SPS400416
SPS400424
SPS400432
SPS400436
SPS400440
SPS400444
SPS400448
SPS400452
SPS400456
SPS400460
SPS400500
SPS400502
SPS500536
SPS500548
SPS500560
SPS600616
SPS600624
SPS600632
SPS600640
SPS600648
SPS600656
SPS600700
SPS600708
SPS600716
SPS600724
SPS800816
SPS800832
SPS800848
SPS800900
SPS800916
SPS800932
SPS800948
8.45
8.45
8.45
8.45
8.45
8.45
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
32.09
32.09
32.09
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
62.46
62.46
62.46
62.46
62.46
62.46
62.46
23
PHONE 800-367-3678
FAX 800-367-3670
304 Stainless
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
24
1-4/64
1-8/64
1-12/64
1-16/64
1-24/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-56/64
2
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-2/64
3
3-8/64
3-16/64
3-24/64
3-32/64
3-34/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-2/64
SSS075104
SSS075108
SSS075112
SSS075116
SSS075124
SSS100116
SSS100120
SSS100124
SSS100128
SSS100132
SSS100136
SSS100140
SSS100144
SSS100148
SSS125156
SSS125200
SSS150152
SSS150156
SSS150160
SSS150200
SSS150204
SSS150208
SSS150212
SSS150216
SSS150220
SSS150224
SSS200216
SSS200224
SSS200228
SSS200232
SSS200236
SSS200240
SSS200244
SSS200248
SSS200252
SSS200256
SSS200260
SSS200300
SSS200302
SSS250300
SSS250308
SSS250316
SSS250324
SSS250332
SSS250334
SSS300324
SSS300328
SSS300332
SSS300336
SSS300340
SSS300344
SSS300348
SSS300352
SSS300356
SSS300360
SSS300400
SSS300402
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
8.53
8.53
8.35
8.35
8.35
8.35
8.35
8.35
8.35
8.35
8.35
8.35
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
16.08
16.08
16.08
16.08
16.08
16.08
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-2/64
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7-8/64
7-16/64
7-24/64
SSS400432
SSS400436
SSS400440
SSS400444
SSS400448
SSS400452
SSS400456
SSS400460
SSS400500
SSS400502
SSS600616
SSS600624
SSS600632
SSS600640
SSS600648
SSS600656
SSS600700
SSS600708
SSS600716
SSS600724
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
SAL200228
SAL200232
SAL200236
SAL200240
SAL200244
SAL200248
SAL200252
SAL200256
SAL200260
SAL200300
SAL300332
SAL300336
SAL300340
SAL300344
SAL300348
SAL300352
SAL300356
SAL300360
SAL300400
SAL300404
SAL400436
SAL400440
SAL400444
SAL400448
SAL400452
SAL400456
SAL400460
SAL400500
SAL400504
SAL400508
SAL600632
SAL600640
SAL600648
SAL600656
10.63
10.63
10.63
10.63
10.63
10.63
10.63
10.63
10.63
10.63
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
21.51
21.51
21.51
21.51
21.51
21.51
21.51
21.51
21.51
21.51
63.55
63.55
63.55
63.55
Aluminum
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
6
6
6
6
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-4/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
5-8/64
6-32/64
6-40/64
6-48/64
6-56/64
®
D
25
D
Couplings for High-Pressure Air and Steam Hose
Stem
Viton O-Ring
CampbellCrimpnology™ offers
hose assembly systems for
your high-pressure steam
and air applications
VITON SEAL
GROUND JOINT COUPLINGS,
AIR HAMMER COUPLINGS,
AND MALE STEMS
Permanentlyattached Ferrule
Features & Benefits
• Viton Seal Couplings pass 1000
hour MIL-H-29210 steam test.
Spud
• Eliminates leaks with nut
hand tightened.
• Viton seal (formulated by DuPont
for high pressure steam and air
applications) is protected inside
machined stem groove and by
swivel nut, extending working life.
• Spud does not contain plastic seat,
extending working life.
• Interchangeable with old-style domestic
ground joint couplings.
• Machined hose
ends with smooth
Smooth
end detail to reduce
End
potential failure
Detail
due to abrasion grips, seals, and
protects hose.
• Interlock groove
locks ferrule into
place for superior
holding power.
• Crimped assemblies
are low profile and
Interlock
eliminate sharp
Groove
edges from bolts.
• Machined from
carbon steel,
cast ductile iron
(meets ASTM A395
specification), and
316 stainless steel.
Recommended hose attachment
• Interlocking U-bolt clamps (Page 29)
Low Profile
Swivel Nut
Steam Hose
Swivel Interlocking
Male Stem
• Designed for use with steam.
• Available with staked ferrule for
crimped steam applications.
• Allows end-user easy
connection into plant facilities.
Staked-On Ferrule for steam hose
Designed specifically for certain hose brands.
Check with factory for information.
• Crimped steam assemblies eliminate the
need for retightening bolts.
• Eliminates leaks, cuts costs caused by
leaky clamps.
• Ferrule serrations bite to the wire achieving
electrical continuity.
• Meets 250 PSI pressure rating for steam
applications.
INTERLOCKING U-BOLT CLAMPS
Features & Benefits
• 360° design wraps completely around hose
for superior retention.
• Clamps fit hoses tightly without cracking,
eliminating costly rework.
• Bolts on “up side” allow easier tightening/
re-tightening and improve “dragability”.
• Field repairable.
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
Male Stem and Mender
Viton Ground Joint Coupling
Male Stem
Male Stem
U-Bolt Clamp
U-Bolt Clamp
Staked Ferrule
Long Ferrule
Long Ferrule
Staked Ferrule
Rubber/Steam
Rubber/Steam
Steam
Rubber
Rubber
Steam
1500
1500
1250
1000
1000
1250
1250
1250
1250
1000
1000
1250
1250
1250
1250
1000
1000
1250
2
See footnotes 1 and 2 on Page 1
26
1-1/4 1-1/2
1250
1250
–
1000
1000
–
1250
1250
–
1000
1000
–
2
2-1/2
3
4
6
8
1250
1250
–
1000
1000
–
800
800
–
650
650
–
500
500
–
400
400
–
500
500
–
400
400
–
–
–
–
–
–
–
–
–
–
–
–
–
D
VITON SEAL
GROUND
JOINT
COUPLINGS
VITON SEAL HOSE STEM
(staked ferrule & low profile nut)
Steel
hose
size
1/2
3/4
1
part
number
**
**
**
list
each
**
**
**
(staked ferrule & wing nut)
Steel
DISTRIBUTOR AUTHORIZATION
Safety is of paramount concern to everyone. Due to the volatile nature of compressed air and steam, and in
accordance with our ISO 9000 quality
system, we reserve the right to restrict
sales of our Ground Joint Viton® Seal
Couplings and U-Bolt Clamps to only
those distributors authorized by
Campbell Fittings.
Please contact our customer service
department for more information.
FEMALE SET
(with low-profile nut)
Steel/Ductile Iron
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
part
number
RGJF-2
RGJF-3
RGJF-4
RGJF-5
RGJF-6
RGJF-8
RGJF-10
RGJF-12
RGJF-16
list
each
32.72
41.15
41.15
72.87
69.93
84.23
220.55
224.29
508.72
316 Stainless
1/2
3/4
1
RGJFSS-2 260.61
RGJFSS-3 270.37
RGJFSS-4 299.34
FEMALE SET
(with wing nut)
Steel/Ductile
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
part
number
GJF-2
GJF-3
GJF-4
GJF-5
GJF-6
GJF-8
GJF-10
GJF-12
GJF-16
hose
size
1/2
3/4
1
part
number
**
**
**
Plated Steel
hose
size
3/4
part
number
IMS-3SW
list
each
36.43
SWIVEL MALE STEM
(with staked ferrule
for use with steam)
list
each
**
**
**
Plated Steel
hose
size
3/4
1
part
number
**
**
list
each
**
**
INTERLOCKING MALE STEM
Steel
npt x
hose
1/4 X 1/4
1/4 X 3/8
3/8 X 1/4
3/8 X 3/8
3/8 X 1/2
1/4 X 1/2
1/2 X 3/8
1/2 X 1/2
1/2 X 3/4
3/4 X 1/2
3/4 X 3/4
3/4 X 1
1 X 3/4
1X1
part
number
IMS-1
IMS-1X38
IMS-38X1
IMS-38
IMS-38X2
IMS-1X2
IMS-2X38
IMS-2
IMS-2X3
IMS-3X2
IMS-3
IMS-3X4
IMS-4X3
IMS-4
list
each
7.25
8.00
8.40
6.30
7.80
7.80
11.10
6.45
14.60
18.60
9.89
22.77
22.37
14.47
Machined Ductile Iron
1-1/4 X 1-1/4
1-1/2 X 1-1/2
2X2
2-1/2 X 2-1/2
3X3
4X4
IMS-5
IMS-6
IMS-8
IMS-10
IMS-12
IMS-16
22.89
25.02
34.82
63.77
86.98
153.08
316 Stainless
1/2 X 1/2
3/4 X 3/4
1X1
IMSS-2
IMSS-3
IMSS-4
63.00
64.00
65.00
INTERLOCKING MALE STEM
(with staked ferrule)
list
each
32.72
41.15
41.15
72.87
69.93
84.23
220.55
221.45
494.72
SWIVEL MALE STEM
(for use with steam)
Steel
hose
size
1/2
3/4
1
part
number
**
**
**
list
each
**
**
**
Steel
hose
size
1/2
3/4
1
part
number
GJS-2
GJS-3
GJS-4
list
each
10.08
18.18
18.18
1-1/4
1-1/2
2
2-1/2
3
4
GJS-5
GJS-6
GJS-8
GJS-10
GJS-12
GJS-16
28.04
28.70
35.99
59.92
91.78
170.32
316 Stainless
1/2
3/4
1
GJSS-2
GJSS-3
GJSS-4
93.40
100.19
127.37
VITON SEAL MALE END
(Viton seal x male npt)
Steel
npt
size
3/4
1
1-1/2
2
part
number
GJMS-3
GJMS-4
GJMS-6
GJMS-8
list
each
52.59
52.59
85.94
90.62
VITON SEAL FEMALE END
(Viton seal x female npt)
Steel
npt
size
3/4
part
number
GJFS-3
list
each
107.85
** Contact Customer Service for part numbers, prices, and availability
Viton should never be used with ammonia.. Please contact
our engineering department for information on all our gasketing materials.
27
HEAVY DUTY
VITON SEAL
AIR HAMMER
COUPLINGS
PHONE 800-367-3678
FAX 800-367-3670
FEMALE SPUD
Steel
npt
size
1/2
3/4
1
part
number
GFS-2
GFS-3
GFS-4
LOW PROFILE NUT
list
each
16.70
14.16
14.16
1-1/4
1-1/2
2
2-1/2
3
4
GFS-5
GFS-6
GFS-8
GFS-10
GFS-12
GFS-16
31.11
27.50
32.91
88.84
72.74
168.78
316 Stainless
1/2
3/4
1
GFSS-2
GFSS-3
GFSS-4
81.50
88.32
90.00
MALE SPUD
Steel
npt
size
1/2
3/4
1
part
number
GMS-2
GMS-3
GMS-4
list
each
23.59
22.28
23.43
GMS-5
GMS-6
GMS-8
GMS-10
GMS-12
53.32
51.37
54.11
133.12
140.55
DOUBLE SPUD
Steel
size
1/2
3/4
1
part
number
GDS-2
GDS-3
GDS-3
list
each
38.77
36.14
36.14
GDS-5
GDS-5
GDS-8
GDS-10
GDS-12
64.62
64.62
64.54
137.32
145.39
SOCKET WELD SPUD
316 Stainless
size
3/4
1
part
number
GWSS-3
GWSS-4
list
each
88.32
90.00
All steel and machined ductile iron parts
are zinc plated. DuPont Viton is the best
O-ring material for couplings used in
both air and steam applications. For
special applications, O-rings of other
materials are available upon request.
28
part
number
RGN-2
RGN-3
RGN-3
RGN-5
RGN-5
RGN-8
RGN-10
RGN-12
RGN-16
list
each
5.41
8.82
8.82
13.73
13.73
15.34
68.64
59.79
169.62
316 Stainless
1/2
3/4
1
RGNSS-2
RGNSS-3
RGNSS-3
85.18
95.71
95.71
WING NUT
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
part
number
GN-2
GN-3
GN-3
GN-5
GN-5
GN-8
GN-10
GN-12
GN-16
list
each
5.41
8.82
8.82
13.73
13.73
15.34
68.64
59.79
169.62
INTERLOCKING HOSE MENDER
Steel
1-1/4
1-1/2
2
2-1/2
3
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
1-1/4
1-1/2
2
2-1/2
3
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
part
number
IHM-2
IHM-3
IHM-4
IHM-5
IHM-6
IHM-8
list
each
22.71
23.90
35.14
50.66
68.63
42.49
part
number
GDC-3
GDC-3
list
each
55.86
55.86
part
number
VO-2
VO-3
VO-3
VO-5
VO-5
VO-8
VO-10
VO-12
VO-16
list
each
1.02
1.19
1.19
2.19
2.19
3.03
4.63
6.37
7.04
part
number
RHJF-3
RHJF-4
list
each
59.36
54.44
FEMALE SET
(with wing nut)
Steel/Ductile Iron
hose
size
3/4
1
part
number
HJF-3
HJF-4
list
each
59.36
54.44
part
number
HJS-3
HJS-4
list
each
19.97
17.40
part
number
HFS-3
HFS-4
list
each
25.48
23.12
part
number
HMS-3
HMS-4
list
each
33.74
31.67
HOSE STEM
Steel
hose
size
3/4
1
FEMALE SPUD
npt
size
3/4
1
MALE SPUD
Steel
VITON O-RING
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
Steel/Ductile Iron
hose
size
3/4
1
Steel
DEAD-END
size
3/4
1
FEMALE SET
(with low profile nut)
npt
size
3/4
1
LOW PROFILE SWIVEL NUT
Ductile Iron
size
3/4
1
part
number
RHN-3
RHN-3
list
each
13.92
13.92
D
INTERLOCKING U-BOLT CLAMPS
WING NUT
Ductile Iron
size
3/4
1
part
number
HN-3
HN-3
list
each
13.92
13.92
part
number
HDS-3
HDS-3
list
each
34.39
34.39
DOUBLE SPUD
Steel
size
3/4
1
SINGLE U-BOLT
hose
o.d. min
13/16
1-1/16
1-3/32
DEAD END
Steel
size
3/4
1
CASTING
part
number
HDC-3
HDC-3
list
each
69.16
69.16
HOSE
part
number
IC-2
IC-3S
IC-3
list
each
8.09
10.47
10.47
hose
o.d. min
1-5/16
1-1/2
1-9/16
1-15/16
2-3/16
2-11/32
2-11/16
3
3-9/32
hose
o.d. max
1-1/2
1-11/16
2
2-3/16
2-3/8
2-11/16
2-15/16
3-9/32
3-9/16
hose
size
1
1
1-1/4
1-1/2
1-1/2
2
2
2-1/2
2-1/2
part
number
IC-4
IC-4L
IC-5
IC-6
IC-6L
IC-8
IC-8L
IC-10
IC-10L
list
each
18.67
18.94
31.03
26.25
28.62
39.50
34.15
50.17
67.49
hose
o.d. max
3-3/4
4-1/8
4-1/2
4-3/4
5-1/8
5-1/2
hose
size
3
3
3
4
4
4
part
number
IC-12S
IC-12
IC-12L
IC-16S
IC-16
IC-16L
list
each
77.59
83.63
116.67
221.87
232.34
381.01
TRIPLE U-BOLT
FITTING
LINER
hose
size
1/2
3/4
3/4
DOUBLE U-BOLT
•
•
hose
o.d. max
1-1/32
1-1/4
1-3/8
hose
o.d. min
3-5/16
3-11/16
4-1/16
4-5/16
4-11/16
5-1/16
•
•
For your convenience, clamps are available bulk packed, upon request.
Bulk pack price is the same as listed above. (IC-2 through IC-4L are packed
25 pieces per carton. IC-5 through IC-8L are packed 10 per carton.)
•
U-BOLT
WHIP CHEK® SAFETY CABLE
(hose to hose)
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
3
4
This 2" 1000 psi rated hose exploded in a test at 5200 psi.
The hose exceeded its minimum 4X safety factor.
The fitting and clamp exceeded the capacity of the hose.
part
number
WC-1
WC-1
WC-1
WC-2
WC-2
WC-2
WC-2
WC-4
list
each
26.08
26.08
26.08
40.74
40.74
40.74
40.74
99.17
FERRULES FOR GROUND JOINT COUPLINGS,
AIR HAMMER COUPLINGS, AND MALE STEMS
29
PHONE 800-367-3678
FAX 800-367-3670
FERRULES
FERRULES
for ground joints
Plated Steel
hose
size
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
ferrule
i.d.
1
1-4/64
1-8/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-52/64
1-52/64
1-56/64
1-60/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
part
number
FPS050100S
FPS050104S
FPS050108S
FPS075116
FPS075120
FPS075124
FPS075128
FPS075132
FPS100132
FPS100136
FPS100140
FPS100144
FPS100148
FPS100152
FPS125152L
FPS125156L
FPS125160L
FPS150160L
FPS150200L
FPS150204L
FPS150208L
FPS150212L
FPS150216L
FPS150220L
FPS150224L
list
each
8.64
8.64
8.64
7.85
7.85
7.85
7.85
7.85
9.86
9.86
9.86
9.86
9.86
9.86
13.87
13.87
13.87
16.60
16.60
16.60
16.60
16.60
16.60
16.60
16.60
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-8/64
4-16/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
5-12/64
5-20/64
5-28/64
FPS200232L
FPS200236L
FPS200240L
FPS200244L
FPS200248L
FPS200252L
FPS200256L
FPS200260L
FPS250308L
FPS250312L
FPS250316L
FPS250320L
FPS250328L
FPS300336L
FPS300340L
FPS300344L
FPS300348L
FPS300352L
FPS300356L
FPS300360L
FPS300400L
FPS300408L
FPS300416L
FPS400440L
FPS400444L
FPS400448L
FPS400452L
FPS400456L
FPS400460L
FPS400500L
FPS400504L
FPS400512L
FPS400520L
FPS400528L
20.16
20.16
20.16
20.16
20.16
20.16
20.16
20.16
27.72
27.72
27.72
27.72
27.72
27.88
27.88
27.88
27.88
27.88
27.88
27.88
27.88
27.88
27.88
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
These ferrules should never
be used for steam applications
go to Section G.
30
®
E
31
E
Couplings & Safety Couplings for Air and Water Hose
hose assembly systems for all
your air applications:
CAMPBELL
SINGLE-LOCK (Bowes-style)
DOUBLE-LOCK (Thor-style)
COUPLINGS
Features & Benefits
• High strength zinc-aluminum alloy
sleeves never rust, never seize or gall.
• Crimpnology hose ends provide the
ultimate in hose retention.
• New 1” sizes added
• Interchangeable with other
Bowes and Thor style couplings.
CAMPBELL
SINGLE-LOCK (Nitrogen)
DOUBLE-LOCK (Nitrogen)
COUPLINGS
Features & Benefits
Nitrogen Kills!
Introducing
Nitrogen-only Single-lock
and Double-lock Couplings.
• High strength zinc-aluminum alloy
sleeves never rust, never seize or gall.
• Crimpnology hose ends provide the
ultimate in hose retention.
• New 1” sizes added
• Interchangeable with other
Bowes and Thor style couplings.
SAFETY AND SAVINGS!
Specify the yellow ring!
Universalock, Single-lock and
Simply the best and safest
way to avoid deadly nitrogen
accidents in plant.
Double-lock couplings meet
OSHA regulation 29CFR1915.131
and MSHA 30 CFR65. 13021
requirements for air hose
UL RECOGNIZED
Patent no. 5,779,277
UNIVERSAL COUPLINGS
AND UNIVERSALOCK™
COUPLINGS
Features & Benefits
• Mates with domestic and imported
universal couplings.
• UniversaLocks automatically lock onto
mating coupling.
• Crimpnology hose end for superior
retention and sealing.
• Cast ductile iron meets ASTM A536
specification.
• Washers manufactured from nitrile for
superior oil resistance.
Investment Cast
Universal Hose Ends
couplings. The fine for an
unpinned/unlocked air hose
coupling can be $800 or more
per infraction. Save your
customer money and headaches.
Use Campbell safety air hose
• Investment casting provides a crisp
high quality, hose-end surface-finish
without costly machining.
• Crimpnology hose ends for superior
retention and sealing.
couplings.
MAXIMUM SYSTEM WORKING PRESSURE (PSI @ 70°F)
32
SEE NOTE 1
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
UniversaLock
UniversaLock
Universal
Universal
Single-Lock Coupling
Double-Lock Coupling
Ferrule
Bolt Clamp
Ferrule
Bolt Clamp
Ferrule
Ferrule
Air
Air
Air
Air
Air
Air
300
150
150
150
300
300
300
150
150
150
300
300
300
150
150
150
300
300
2
Investment Cast
Universal
Hose Ends:
Short,
Crimp-Specific
Shank (left) and
Standard Shank
(right)
E
UNIVERSAL COUPLINGS
MALE NPT
Ductile Iron
npt
size
3/8
1/2
3/4
1
part
number
UM-38
UM-2
UM-3
UM-4
UNIVERSALOCK™
COUPLINGS
list
each
9.35
8.20
8.40
9.20
ctn
qty
25
25
25
25
60.24
52.21
56.24
25
25
25
list
each
13.03
ctn
qty
25
316 Stainless
1/2
3/4
1
BLANK END
HOSE END
Ductile Iron
(machined serrations)
hose
size
3/8
1/2
5/8
3/4
1
part
number
UH-38
UH-2
UH-58
UH-3
UH-4
list
each
10.74
6.90
10.56
7.05
9.29
ctn
qty
25
25
25
25
25
Plated Steel
(investment cast)
1/2
3/4
1
UH-2i
UH-3i
UH-4i
5.54
5.64
7.33
25
25
25
316 Stainless
1/2
3/4
1
UHSS-2
UHSS-3
UHSS-4
55.68
46.80
51.75
25
25
25
Plated Steel
(investment cast)
part
number
UH-3C
npt
size
3/8
1/2
3/4
1
part
number
UF-38
UF-2
UF-3
UF-4
list
each
4.94
ctn
qty
25
list
each
9.26
8.50
8.15
10.41
ctn
qty
25
25
25
25
60.24
52.21
56.24
25
25
25
316 Stainless
1/2
3/4
1
UFSS-2
UFSS-3
UFSS-4
size
All
part
number
UB
THREE WAY
Ductile Iron
size
All
part
number
UTW
list
each
24.06
ctn
qty
12
UNIVERSAL WASHER
Nitrile
size
All
part
number
UG
list
each
0.70
part
number
SC
list
each
0.35
ctn
qty
25
ctn
qty
25
TWO-BOLT
UNIVERSAL CLAMP
Ductile Iron
hose o.d.
min to max
3/4 to 15/16
1 to 1-1/4
1-1/4 to 1-17/32
Safety is of paramount concern to everyone. Due to the volatile nature of compressed air, and in accordance with our ISO
9000 quality system, we reserve the right
to restrict sales of our UniversaLock ®
Couplings to only those distributors authorized by Campbell Fittings.
Please contact our customer service depart-
Never use Universal Washers
in UniversaLock Couplings
size
All
FEMALE NPT
Ductile Iron
Ductile Iron
SAFETY CLIP
HOSE END
(crimp specific)
hose
size
3/4
UMSS-2
UMSS-3
UMSS-4
part
list ctn
no.
each qty
UC-2 7.42 25
UC-3 7.48 25
UC-4 12.93 25
HOSE END
Ductile Iron
hose
size
1/2
3/4
1
part
number
ULH-2
ULH-3
ULH-4
list
each
26.54
26.54
27.05
ctn
qty
10
10
10
list
each
26.54
26.54
27.05
ctn
qty
10
10
10
list
each
26.54
26.54
ctn
qty
10
10
MALE END
Ductile Iron
npt
size
1/2
3/4
1
part
number
ULM-2
ULM-3
ULM-4
FEMALE END
Ductile Iron
npt
size
1/2
3/4
part
number
ULF-2
ULF-3
UNIVERSALOCK WASHER
Nitrile
size
All
part
number
ULW
list
each
2.75
ctn
qty
25
Never use UniversaLock Washers
in standard Universal Couplings
33
PHONE 800-367-3678
FAX 800-367-3670
SINGLE-LOCK
COUPLINGS
(Bowes interchange)
FEMALE X MALE NPT
Plated Steel
npt
size
3/8
1/2
3/4
1
part
number
BFMS-38
BFMS-2
BFMS-3
BFMS-4
MALE X FEMALE NPT
(with locking ring)
Plated Steel
list
each
19.35
19.35
19.35
22.22
npt
size
3/8
1/2
3/4
1
Brass
3/8
1/2
3/4
1
BFMB-38
BFMB-2
BFMB-3
BFMB-4
Plated Steel
MALE X HOSE
Plated Steel
hose
size
1/2
3/4
part
number
BMHS-2
BMHS-3
list
each
23.88
23.88
Brass
1/2
3/4
BMHB-2
BMHB-3
40.21
40.21
MALE X MALE NPT
Plated Steel
npt
size
1/2
3/4
part
number
BMMS-2
BMMS-3
list
each
24.68
24.68
Brass
1/2
3/4
BMMB-2
BMMB-3
36.07
36.07
npt
size
1/2
3/4
part
number
BMFS-2
BMFS-3
list
each
23.88
23.88
Brass
1/2
3/4
BMFB-2
BMFB-3
37.61
37.61
FEMALE X HOSE
Plated Steel
hose
size
1/2
3/4
part
number
BFHS-2
BFHS-3
list
each
19.35
19.35
Brass
1/2
3/4
BFHB-2
BFHB-3
part
number
BFFS-38
BFFS-2
BFFS-3
BFFS-4
list
each
19.35
19.35
19.35
22.22
Brass
3/8
1/2
3/4
1
BFFB-38
BFFB-2
BFFB-3
BFFB-4
28.94
28.94
28.94
33.28
29.94
28.94
1/2
3/4
1
BMFB-2L
BMFB-3L
BMFB-4L
43.86
43.86
49.43
GASKET
Nitrile
size
ALL
part
number
BGN-1
list
each
1.39
SINGLE-LOCK
COUPLINGS
(for Nitrogen use only)
MALE X HOSE
(with locking ring)
Plated Steel
hose
size
3/8
1/2
3/4
1
part
number
BMHS-38L
BMHS-2L
BMHS-3L
BMHS-4L
list
each
32.72
32.72
32.72
36.65
Brass
MALE X FEMALE NPT
Plated Steel
npt
size
3/8
1/2
3/4
1
list
each
32.72
32.72
32.72
37.62
Brass
28.94
28.94
28.94
33.28
FEMALE X FEMALE NPT
part
number
BMFS-38L
BMFS-2L
BMFS-3L
BMFS-4L
1/2
3/4
1
BMHB-2L
BMHB-3L
BMHB-4L
43.86
43.86
49.43
MALE X MALE NPT
(with locking ring)
Plated Steel
npt
size
3/8
1/2
3/4
1
part
number
BMMS-38L
BMMS-2L
BMMS-3L
BMMS-4L
list
each
32.72
32.72
32.72
37.62
Brass
1/2
3/4
1
BMMB-2L
BMMB-3L
BMMB-4L
43.86
43.86
49.43
Safety is of paramount concern to
everyone. Due to the dangers of
Nitrogen, and in accordance with our
ISO 9000 quality system, we reserve
the right to restrict sales of our Nitrogen
Couplings to only those distributors
authorized by Campbell Fittings.
MALE X HOSE
(with Nitrogen ring)
Plated Steel
hose
size
3/8
1/2
3/4
1
part
number
BMHS-38N
BMHS-2N
BMHS-3N
BMHS-4N
list
each
32.72
32.72
31.87
36.65
Brass
1/2
3/4
1
34
BMHB-2N
BMHB-3N
BMHB-4N
43.86
43.86
49.43
E
MALE X MALE NPT
Plated Steel
npt
size
3/8
1/2
3/4
1
part
number
BMMS-38N
BMMS-2N
BMMS-3N
BMMS-4N
MALE NPT
Plated Steel
Brass
1/2
3/4
1
BMMB-2N
BMMB-3N
BMMB-4N
npt
size
3/8
1/2
3/4
list
each
32.72
32.72
32.72
37.62
43.86
43.86
49.43
Plated Steel
part
number
BMFS-38N
BMFS-2N
BMFS-3N
BMFS-4N
3/4
BMFB-2N
BMFB-3N
BMFB-4N
TLMSS-3
279.64
FEMALE NPT
Plated Steel
npt
size
1/2
3/4
part
number
TLF-2
TLF-3
list
each
37.96
37.96
Stainless
list
each
32.72
32.72
32.72
37.62
3/4
TLFSS-3
279.64
MALE NPT
(without locking sleeve)
Plated Steel
npt
size
3/8
1/2
3/4
1
Brass
1/2
3/4
1
list
each
33.33
33.15
33.15
Stainless
MALE X FEMALE NPT
npt
size
3/8
1/2
3/4
1
part
number
TLM-38
TLM-2
TLM-3
43.86
43.86
49.43
part
number
TM-38
TM-2
TM-3
TM-4
list
each
19.72
19.35
20.32
22.78
Stainless
3/4
DOUBLE-LOCK
COUPLINGS
(Thor interchange)
TMSS-3
138.73
Plated Steel
npt
size
3/8
1/2
3/4
1
part
number
TF-38
TF-2
TF-3
TF-4
list
each
22.74
24.63
24.74
26.94
Stainless
3/4
TFSS-3
138.73
GASKET
Nitrile
Plated Steel
hose
size
3/8
1/2
3/4
1
part
number
TLH-38
TLH-2
TLH-3
TLH-4
list
each
35.23
35.23
37.22
56.71
Stainless
3/4
TLHSS-3
315.45
size
ALL
part
number
TGN-1
Safety is of paramount concern to
everyone. Due to the dangers of
Nitrogen, and in accordance with our
ISO 9000 quality system, we reserve
the right to restrict sales of our Nitrogen
Couplings to only those distributors
authorized by Campbell Fittings.
HOSE END
Plated Steel
FEMALE NPT
(without locking sleeve)
HOSE END
DOUBLE-LOCK
COUPLINGS
(for Nitrogen use only)
list
each
2.63
hose
size
3/8
1/2
3/4
1
part
number
TLH-38N
TLH-2N
TLH-3N
TLH-4N
list
each
46.86
46.86
49.50
75.42
MALE NPT
Plated Steel
hose
size
3/8
1/2
3/4
1
part
number
TLM-38N
TLM-2N
TLM-3N
TLM-4N
list
each
44.33
44.09
44.09
61.60
FEMALE NPT
Plated Steel
hose
size
3/8
1/2
3/4
1
part
number
TLF-38N
TLF-2N
TLF-3N
TLF-4N
list
each
50.49
50.49
50.49
61.60
FERRULES FOR AIR HOSE COUPLINGS
35
PHONE 800-367-3678
FAX 800-367-3670
LIGHT DUTY
FERRULES
THROTTLE VALVES
FERRULES
(light duty)
Plated Steel
FEMALE X FEMALE
npt
size
1/2
3/4
1
part
number
ADI-12
ADI-34
ADI-10
list
each
POR
POR
POR
MALE X MALE
npt
size
1/2
3/4
1
part
number
ADA-12
ADA-34
ADA-10
list
each
POR
POR
POR
FEMALE X DOUBLE MALE
(female 1" npt)
npt
part
size
number
1 X 3/4 DHA-10
list
each
POR
DHA-10 has downstream venting.
hose
size
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
ferrule
i.d.
58/64
60/64
1-8/64
1-10/64
1-12/64
1-14/64
1-16/64
1-18/64
1-28/64
1-30/64
1-32/64
1-34/64
1-36/64
part
number
FLPS050058
FLPS050060
FLPS075108
FLPS075110
FLPS075112
FLPS075114
FLPS075116
FLPS075118
FLPS100128
FLPS100130
FLPS100132
FLPS100134
FLPS100136
list ctn
each qty
1.07 25
1.07 25
1.43 25
1.43 25
1.43 25
1.43 25
1.43 25
1.43 25
2.06 25
2.06 25
2.06 25
2.06 25
2.06 25
FLSS050058
FLSS075108
FLSS075112
FLSS075114
FLSS075116
FLSS075118
FLSS100128
FLSS100130
FLSS100132
FLSS100134
FLSS100136
2.28
2.64
2.64
2.64
2.64
2.64
3.89
3.89
3.89
3.89
3.89
304 Stainless
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
58/64
1-8/64
1-12/64
1-14/64
1-16/64
1-18/64
1-28/64
1-30/64
1-32/64
1-34/64
1-36/64
go to Section G.
36
25
25
25
25
25
25
25
25
25
25
25
®
F
37
F
Fittings & Couplings for High, Medium, and Low Pressure Chemical Hose
hose assembly systems for all
your chemical applications!
CHEMJOINT™ COUPLINGS & MALE STEMS
Description
ChemJoint Couplings and Male Stems create an extremely
versatile chemical hose assembly system. The system solves
problematic cam and groove issues such as pressure,
temperature, side load, viscosity, line dedication and ergonomics.
Features and Benefits
• Graduated serration pattern sharper near the interlock,
rounder near the end. Grips
and seals plastic lined chemical
hose without cutting through
the tube.
• Interlock-groove locks ferrule
into place for the ultimate in
holding power.
• Crimped assemblies are low
profile and eliminate sharp
edges from bands.
• Viton seal allows coupling to
meet pressure ratings with nut
hand tightened.
Recommended
hose attachment
• Preformed bands (Section I)
ChemJoint Couplings are
available with weld ends for
use with metal hose.
(left)
1” ChemJoint
Coupling Set
(right)
1” ChemJoint
Union with
Viton Spud
Hose Size
Fitting/Coupling
Attachment
Hose Type2
1/2
3/4
1
ChemJoint/Male Stem
ChemJoint/Male Stem
ChemJoint Weld-On and Union
Ferrule
Ferrule
None
Chemical
Rubber
None
350
350
–
400
400
800
450
450
800
See footnotes 1 and 2 on Page 1
38
1-1/4 1-1/2
325
425
–
250
400
650
2
2-1/2
3
4
6
8
250
350
600
225
325
–
225
300
600
200
250
–
–
–
–
–
–
–
F
®
CHEMJOINT FEMALE VITON SPUD
CHEMJOINT
COUPLINGS
316 Stainless
npt
size
3/4
1
1-1/2
2
3
part
number
CJVS-3
CJVS-4
CJVS-6
CJVS-8
CJVS-12
list
each
125.08
125.08
140.90
250.14
483.60
316 Stainless with ACME threads
npt
size
1
2
part
number
CJVS-4A
CJVS-8A
list
each
158.00
311.00
CHEMJOINT HOSE STEM
316 Stainless
hose
size
3/4
1
1-1/2
2
3
Safety is of paramount concern to everyone. Due to
the dangerous nature of chemical hose applications,
and in accordance with our ISO 9000 quality system,
we reserve the right to restrict sales of our
ChemJoint™ Couplings and Male Stems to only those
distributors authorized by Campbell Fittings.
316 Stainless
size
1
1-1/2
2
3
CHEMJOINT MALE STEM
316 Stainless
part
number
CJMS-2
CJMS-3
CJMS-4
CJMS-5
CJMS-6
CJMS-8
CJMS-10
CJMS-12
CJMS-16
list
each
41.70
41.70
50.03
58.36
65.03
71.70
113.41
146.38
216.29
CHEMJOINT COUPLING FEMALE SET
316 Stainless
hose
size
3/4
1
1-1/2
2
3
part
number
CJSS-3
CJSS-4
CJSS-6
CJSS-8
CJSS-12
list
each
108.40
108.40
108.40
116.73
161.73
CHEMJOINT WELD-ON STEM
Please contact our customer service department for
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
part
number
CJHS-3
CJHS-4
CJHS-6
CJHS-8
CJHS-12
list
each
321.84
321.84
398.57
541.97
975.54
part
number
CJWS-4
CJWS-6
CJWS-8
CJWS-12
list
each
100.08
100.08
108.40
133.40
CHEMJOINT MALE THREADED STEM
316 Stainless
npt
size
1
1-1/2
2
3
part
number
CJTS-4
CJTS-6
CJTS-8
CJTS-12
list
each
108.40
108.40
116.73
161.73
CHEMJOINT UNION WITH VITON SPUD
316 Stainless
npt
size
3/4
1
2
3
part
number
CJFU-3
CJFU-4
CJFU-8
CJFU-12
list
each
541.97
625.34
792.10
1067.27
Viton should never be used with ammonia.
Please contact our engineering department for information on all our gasketing materials.
39
PHONE 800-367-3678
FAX 800-367-3670
FERRULES
CHEMJOINT UNION (without Viton Spud)
316 Stainless
npt
size
3/4
1
2
3
part
number
CJFS-3
CJFS-4
CJFS-8
CJFS-12
list
each
416.92
500.26
541.97
583.66
npt
size
1
2
part
number
CJFS-4A
CJFS-8A
FERRULES
for chemjoint couplings
list
each
591.00
633.00
304 Stainless
CHEMJOINT NUT
316 Stainless
size
3/4
1
1-1/2
2
3
part
number
CJN-3
CJN-3
CJN-6
CJN-8
CJN-12
list
each
85.19
85.19
149.26
175.08
330.19
npt
size
1
2
part
number
CJN-4A
CJN-8A
list
each
103.00
187.00
CHEMJOINT DUST CAP
316 Stainless
size
3/4
1
2
3
part
number
CJDC-3
CJDC-3
CJDC-8
CJDC-12
list
each
83.38
83.38
166.78
333.53
npt
size
1
2
part
number
CJDC-4A
CJDC-8A
list
each
125.00
174.00
CHEMJOINT VITON® SEAL DUST PLUG
316 Stainless
size
3/4
1
2
3
part
number
CJDP-3
CJDP-3
CJDP-8
CJDP-12
list
each
119.15
119.15
303.49
546.62
npt
size
1
2
part
number
CJDP-4A
CJDP-8A
list
each
165.00
374.00
go to Section G.
40
hose
size
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
ferrule
i.d.
1
1-4/64
1-8/64
1-12/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-52/64
1-52/64
1-56/64
1-60/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
part
number
FSS050100
FSS050104
FSS050108
FSS075112
FSS075116
FSS075120
FSS075124
FSS075128
FSS075132
FSS100132
FSS100136
FSS100140
FSS100144
FSS100148
FSS100152
FSS125152
FSS125156
FSS125160
FSS150160
FSS150200
FSS150204
FSS150208
FSS150212
FSS150216
FSS150220
FSS150224
FSS200232
FSS200236
FSS200240
FSS200244
FSS200248
FSS200252
FSS200256
FSS200260
FSS250308
FSS250312
FSS250316
FSS250320
FSS250328
FSS300336
FSS300340
FSS300344
FSS300348
FSS300352
FSS300356
FSS300360
FSS300400
FSS400436
FSS400440
FSS400444
FSS400448
FSS400452
FSS400456
FSS400460
FSS400500
FSS400504
list
each
9.18
9.18
9.18
9.51
9.51
9.51
9.51
9.51
9.51
9.85
9.85
9.85
9.85
9.85
9.85
11.84
11.84
11.84
15.45
15.45
15.45
15.45
15.45
15.45
15.45
15.45
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
17.12
28.08
28.08
28.08
28.08
28.08
28.08
28.08
28.08
65.18
65.18
65.18
65.18
65.18
65.18
65.18
65.18
65.18
G
®
41
G
Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems
CampbellCrimpnology™ ...
the only comprehensive package of
crimping products in the industry!
Crimpnology refers to all of the technology involved in crimping: the
integrated design of every fitting, coupling, ferrule, and sleeve; the crimp
procedures; crimp specifications; and crimp training & support.
HOSE
FERRULE
FITTING
INTERLOCK
The turn-in of the ferrule
interlocks with the machined
groove on the fitting or coupling,
providing a mechanical attachment
for exceptional hose retention
Features and Benefits
Crimpnology offers the following “7 Essentials” for crimping safe, repeatable,
performance-rated hose systems:
• Interlock groove on all fittings and couplings is compatible with the
turn-in end of the ferrule to ensure a 360° ferrule-to-fitting interlock.
• Serrations specifically designed for crimping provide
maximum hose retention without potential tube failure.
• Shank length and ferrule/sleeve length are matched
to maximize retention and to avoid hose tube or
cover damage.
• Detailed assembly procedures are
provided, including information to ensure
use of compatible components.
• Detailed crimping procedures (right) ensure
appropriate crimp specification is derived for each
hose and fitting combination.
• On-site crimping training by a Hose System Specialist,
including a CD/video for review (left), is offered by
Campbell to assist distributor personnel.
• A daytime, toll-free “hotline” is manned by a Campbell
Hose System Specialist to assist in all aspects of training.
FERRULE & SLEEVE PART NUMBERING
PRODUCT
F = Ferrule
S = Sleeve
MATERIAL
FERRULE/SLEEVE I.D.
PS = Plated Steel
216 = 2-16/64”
SS = Stainless Steel
340 = 3-40/64”
F PS 150 216 L
NOMINAL HOSE SIZE
150 = 1-1/2”
200 = 2”
42
NON-STANDARD LENGTH
L = Long
S = Short
Performance-Rated
All Campbell pressure ratings are established and verified by hydrostatic
testing to a 4X safety factor where applicable (see page 1 for pressure
rating information). Test data and information regarding various combinations of hoses and fittings are available upon request.
Note: Campbell sleeves may be used on non-Campbell fittings. We
cannot provide crimp specifications or recommend working pressures for
non-Campbell parts. The pressure ratings in this catalog are valid only
when using all Campbell parts. For safety and quality assurance, always
proof test hose assembly according to NAHAD guidelines.
G
FERRULES
FERRULES
for use with products shown below only:
Crimpnology
Nipples
(page 13)
Campbell
Cobra
Parts C & E
(page 17)
Plated Steel
hose
size
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
ferrule
i.d.
1-12/64
1-20/64
1-24/64
1-28/64
1-32/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-52/64
1-52/64
1-56/64
1-60/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-8/64
4-16/64
4-36/64
4-40/64
4-44/64
4-48/64
part
number
FPS075112
FPS075120
FPS075124
FPS075128
FPS075132
FPS100132
FPS100136
FPS100140
FPS100144
FPS100148
FPS100152
FPS125152
FPS125156
FPS125160
FPS150160
FPS150200
FPS150204
FPS150208
FPS150212
FPS150216
FPS150220
FPS150224
FPS200232
FPS200236
FPS200240
FPS200244
FPS200248
FPS200252
FPS200256
FPS200260
FPS250308
FPS250312
FPS250316
FPS250320
FPS250328
FPS300336
FPS300340
FPS300344
FPS300348
FPS300352
FPS300356
FPS300360
FPS300400
FPS300408
FPS300416
FPS400436
FPS400440
FPS400444
FPS400448
ChemJoint
Couplings &
Male Stems
(page 39)
list
each
7.85
7.85
7.85
7.85
7.85
9.86
9.86
9.86
9.86
9.86
9.86
10.25
10.25
10.25
11.24
11.24
11.24
11.24
11.24
11.24
11.24
11.24
12.56
12.56
12.56
12.56
12.56
12.56
12.56
12.56
16.72
16.72
16.72
16.72
16.72
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
16.98
22.31
22.31
22.31
22.31
4
4
4
4
4
6
6
6
6
4-52/64
4-56/64
4-60/64
5
5-4/64
6-40/64
6-56/64
7-8/64
7-24/64
FPS400452
FPS400456
FPS400460
FPS400500
FPS400504
FPS600640
FPS600656
FPS600708
FPS600724
22.31
22.31
22.31
22.31
22.31
49.99
49.99
49.99
49.99
304 Stainless
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
6
6
6
1
FSS050100
9.18
1-4/64
FSS050104
9.18
1-8/64
FSS050108
9.18
1-12/64 FSS075112
9.51
1-16/64 FSS075116
9.51
1-20/64 FSS075120
9.51
1-24/64 FSS075124
9.51
1-28/64 FSS075128
9.51
1-32/64 FSS075132
9.51
1-32/64 FSS100132
9.85
1-36/64 FSS100136
9.85
1-40/64 FSS100140
9.85
1-44/64 FSS100144
9.85
1-48/64 FSS100148
9.85
1-52/64 FSS100152
9.85
1-52/64 FSS125152 11.84
1-56/64 FSS125156 11.84
1-60/64 FSS125160 11.84
1-60/64 FSS150160 15.45
2
FSS150200 15.45
2-4/64
FSS150204 15.45
2-8/64
FSS150208 15.45
2-12/64 FSS150212 15.45
2-16/64 FSS150216 15.45
2-20/64 FSS150220 15.45
2-24/64 FSS150224 15.45
2-32/64 FSS200232 17.12
2-36/64 FSS200236 17.12
2-40/64 FSS200240 17.12
2-44/64 FSS200244 17.12
2-48/64 FSS200248 17.12
2-52/64 FSS200252 17.12
2-56/64 FSS200256 17.12
2-60/64 FSS200260 17.12
3-8/64
FSS250308 17.12
3-12/64 FSS250312 17.12
3-16/64 FSS250316 17.12
3-20/64 FSS250320 17.12
3-28/64 FSS250328 17.12
3-36/64 FSS300336 28.08
3-40/64 FSS300340 28.08
3-44/64 FSS300344 28.08
3-48/64 FSS300348 28.08
3-52/64 FSS300352 28.08
3-56/64 FSS300356 28.08
3-60/64 FSS300360 28.08
4
FSS300400 28.08
4-36/64 FSS400436 65.18
4-40/64 FSS400440 65.18
4-44/64 FSS400444 65.18
4-48/64 FSS400448 65.18
4-52/64 FSS400452 65.18
4-56/64 FSS400456 65.18
4-60/64 FSS400460 65.18
5
FSS400500 65.18
5-4/64
FSS400504 65.18
6-56/64 FSS600656 82.45
7-8/64
FSS600708 82.45
7-24/64 FSS600724 82.45
43
PHONE 800-367-3678
FAX 800-367-3670
Plated Steel-Heavy Duty
(for FRAC-16 fittings only)
hose
size
4
4
4
4
4
ferrule
i.d.
4-48/64
4-52/64
4-56/64
4-60/64
5
part
number
FPS400448F
FPS400452F
FPS400456F
FPS400460F
FPS400500F
3
3
4
4
4
4
4
4
4
4
4
4
4
list
each
31.20
31.20
31.20
31.20
31.20
FERRULES
4-8/64
4-16/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
5-12/64
5-20/64
5-28/64
FPS300408L
FPS300416L
FPS400440L
FPS400444L
FPS400448L
FPS400452L
FPS400456L
FPS400460L
FPS400500L
FPS400504L
FPS400512L
FPS400520L
FPS400528L
27.88
27.88
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
37.85
WARNING: NOT FOR USE WITH STEAM
Long
Crimpnology
Nipples
(page 13)
Plated Steel
44
hose
size
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
ferrule
i.d.
1
1-4/64
1-8/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-52/64
1-52/64
1-56/64
1-60/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3-8/64
3-12/64
3-16/64
3-20/64
3-28/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
Viton Seal
Ground
Joints and
Male Stems
(page 27)
part
number
FPS050100S
FPS050104S
FPS050108S
FPS075116
FPS075120
FPS075124
FPS075128
FPS075132
FPS100132
FPS100136
FPS100140
FPS100144
FPS100148
FPS100152
FPS125152L
FPS125156L
FPS125160L
FPS150160L
FPS150200L
FPS150204L
FPS150208L
FPS150212L
FPS150216L
FPS150220L
FPS150224L
FPS200232L
FPS200236L
FPS200240L
FPS200244L
FPS200248L
FPS200252L
FPS200256L
FPS200260L
FPS250308L
FPS250312L
FPS250316L
FPS250320L
FPS250328L
FPS300336L
FPS300340L
FPS300344L
FPS300348L
FPS300352L
FPS300356L
FPS300360L
FPS300400L
list
each
8.64
8.64
8.64
7.85
7.85
7.85
7.85
7.85
9.86
9.86
9.86
9.86
9.86
9.86
13.87
13.87
13.87
16.60
16.60
16.60
16.60
16.60
16.60
16.60
16.60
20.16
20.16
20.16
20.16
20.16
20.16
20.16
20.16
27.72
27.72
27.72
27.72
27.72
27.88
27.88
27.88
27.88
27.88
27.88
27.88
27.88
LIGHT DUTY
FERRULES
FERRULES (light duty)
for use with couplings shown below only:
All
Campbell
Universals
(page 33)
UniversaLock
(page 33)
Plated Steel
hose
size
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
ferrule
i.d.
58/64
60/64
1-8/64
1-10/64
1-12/64
1-14/64
1-16/64
1-18/64
1-28/64
1-30/64
1-32/64
1-34/64
1-36/64
Single-Lock
(Bowes)
(page 34)
part
list
number
each
FLPS050058 1.12
FLPS050060 1.12
FLPS075108 1.50
FLPS075110 1.50
FLPS075112 1.50
FLPS075114 1.50
FLPS075116 1.50
FLPS075118 1.50
FLPS100128 2.16
FLPS100130 2.16
FLPS100132 2.16
FLPS100134 2.16
FLPS100136 2.16
304 Stainless
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
58/64
1-8/64
1-12/64
1-14/64
1-16/64
1-18/64
1-28/64
1-30/64
1-32/64
1-34/64
1-36/64
FLSS050058
FLSS075108
FLSS075112
FLSS075114
FLSS075116
FLSS075118
FLSS100128
FLSS100130
FLSS100132
FLSS100134
FLSS100136
2.39
2.77
2.77
2.77
2.77
2.77
4.08
4.08
4.08
4.08
4.08
Double-Lock
(Thor)
(page 34)
G
SLEEVES
SLEEVES
Campbell
Cobra™
Parts C & E
(page 17)
Plated Steel
hose
size
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2
sleeve
i.d.
1-8/64
1-12/64
1-16/64
1-20/64
1-24/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-56/64
2
1-48/64
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-2/64
Standard
Cobra™
Parts C & E
(page 18, 19)
part
number
SPS075108
SPS075112
SPS075116
SPS075120
SPS075124
SPS100116
SPS100120
SPS100124
SPS100128
SPS100132
SPS100136
SPS100140
SPS100144
SPS100148
SPS125156
SPS125200
SPS150148
SPS150152
SPS150156
SPS150160
SPS150200
SPS150204
SPS150208
SPS150212
SPS150216
SPS150220
SPS150224
SPS200216
SPS200224
SPS200228
SPS200232
SPS200236
SPS200240
SPS200244
SPS200248
SPS200252
SPS200256
SPS200260
SPS200300
SSS200302
list
each
4.81
4.81
4.81
4.81
4.81
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.70
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
4.83
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
5.53
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
3
3-8/64
3-16/64
3-24/64
3-32/64
3-34/64
3-16/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-2/64
4-16/64
4-24/64
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-2/64
5-36/64
5-48/64
5-60/64
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7-8/64
7-16/64
7-24/64
8-16/64
8-32/64
8-48/64
9
9-16/64
9-32/64
9-48/64
SPS250300
SPS250308
SPS250316
SPS250324
SPS250332
SPS250334
SPS300316
SPS300324
SPS300328
SPS300332
SPS300336
SPS300340
SPS300344
SPS300348
SPS300352
SPS300356
SPS300360
SPS300400
SPS300402
SPS400416
SPS400424
SPS400432
SPS400436
SPS400440
SPS400444
SPS400448
SPS400452
SPS400456
SPS400460
SPS400500
SPS400502
SPS500536
SPS500548
SPS500560
SPS600616
SPS600624
SPS600632
SPS600640
SPS600648
SPS600656
SPS600700
SPS600708
SPS600716
SPS600724
SPS800816
SPS800832
SPS800848
SPS800900
SPS800916
SPS800932
SPS800948
8.45
8.45
8.45
8.45
8.45
8.45
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
32.09
32.09
32.09
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
62.46
62.46
62.46
62.46
62.46
62.46
62.46
SSS075104
SSS075108
SSS075112
SSS075116
SSS075124
SSS100116
SSS100120
SSS100124
SSS100128
SSS100132
SSS100136
SSS100140
SSS100144
SSS100148
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
7.55
304 Stainless
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1-4/64
1-8/64
1-12/64
1-16/64
1-24/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
45
PHONE 800-367-3678
FAX 800-367-3670
304 Stainless Sleeves
Aluminum
(continued from previous page)
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
6
6
6
6
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
8
10
46
1-56/64
2
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-2/64
3
3-8/64
3-16/64
3-24/64
3-32/64
3-34/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-2/64
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-2/64
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7
SSS125156
SSS125200
SSS150152
SSS150156
SSS150160
SSS150200
SSS150204
SSS150208
SSS150212
SSS150216
SSS150220
SSS150224
SSS200216
SSS200224
SSS200228
SSS200232
SSS200236
SSS200240
SSS200244
SSS200248
SSS200252
SSS200256
SSS200260
SSS200300
SSS200302
SSS250300
SSS250308
SSS250316
SSS250324
SSS250332
SSS250334
SSS300324
SSS300328
SSS300332
SSS300336
SSS300340
SSS300344
SSS300348
SSS300352
SSS300356
SSS300360
SSS300400
SSS300402
SSS400432
SSS400436
SSS400440
SSS400444
SSS400448
SSS400452
SSS400456
SSS400460
SSS400500
SSS400502
SSS600616
SSS600624
SSS600632
SSS600640
SSS600648
SSS600656
SSS600700
SSS600700
SSS800XXX
SSS101XXX
8.53
8.53
8.35
8.35
8.35
8.35
8.35
8.35
8.35
8.35
8.35
8.35
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
11.40
16.08
16.08
16.08
16.08
16.08
16.08
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
POR
POR
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-4/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-4/64
5-8/64
6-32/64
6-40/64
6-48/64
6-56/64
SAL200228
SAL200232
SAL200236
SAL200240
SAL200244
SAL200248
SAL200252
SAL200256
SAL200260
SAL200300
SAL300332
SAL300336
SAL300340
SAL300344
SAL300348
SAL300352
SAL300356
SAL300360
SAL300400
SAL300404
SAL400436
SAL400440
SAL400444
SAL400448
SAL400452
SAL400456
SAL400460
SAL400500
SAL400504
SAL400508
SAL600632
SAL600640
SAL600648
SAL600656
10.63
10.63
10.63
10.63
10.63
10.63
10.63
10.63
10.63
10.63
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
16.07
21.51
21.51
21.51
21.51
21.51
21.51
21.51
21.51
21.51
21.51
63.55
63.55
63.55
63.55
SLEEVES
Suction Hose
Couplings
(page 7)
Combination
Nipples
(page 5)
Plated Steel
hose
size
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
sleeve
i.d.
1
1-8/64
1-12/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
part
list
number
each
SPS050100S 4.73
SPS075108S 4.90
SPS075112S 4.90
SPS075116S 4.90
SPS075120S 4.90
SPS075124S 4.90
SPS100128S 4.70
SPS100132S 4.70
SPS100136S 4.70
SPS100140S 4.70
SPS100144S 4.70
SPS100148S 4.70
Ball & Socket
Couplings
(page 9)
G
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
5
5
5
6
6
6
6
6
6
6
6
6
1-40/64
1-48/64
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-8/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
2-48/64
2-56/64
3
3-8/64
3-16/64
3-24/64
3-32/64
3-8/64
3-16/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-16/64
4-24/64
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
5-36/64
5-48/64
5-60/64
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7-8/64
7-16/64
SPS125140S
SPS125148S
SPS125152S
SPS125156S
SPS150160S
SPS150200S
SPS150204S
SPS150208S
SPS150212S
SPS150216S
SPS150220S
SPS150224S
SPS200208S
SPS200216S
SPS200224S
SPS200228S
SPS200232S
SPS200236S
SPS200240S
SPS200244S
SPS200248S
SPS200252S
SPS200256S
SPS200260S
SPS200300S
SPS250248S
SPS250256S
SPS250300S
SPS250308S
SPS250316S
SPS250324S
SPS250332S
SPS300308S
SPS300316S
SPS300324S
SPS300328S
SPS300332S
SPS300336S
SPS300340S
SPS300344S
SPS300348S
SPS300352S
SPS300356S
SPS300360S
SPS300400S
SPS400416S
SPS400424S
SPS400432S
SPS400436S
SPS400440S
SPS400444S
SPS400448S
SPS400452S
SPS400456S
SPS400460S
SPS400500S
SPS500536
SPS500548
SPS500560
SPS600616
SPS600624
SPS600632
SPS600640
SPS600648
SPS600656
SPS600700
SPS600708
SPS600716
4.70
4.70
4.70
4.70
4.94
4.94
4.94
4.94
4.94
4.94
4.94
4.94
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
8.18
8.18
8.18
8.18
8.18
8.18
8.18
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
9.75
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
13.14
32.09
32.09
32.09
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
36.76
6
8
8
8
8
8
8
8
10
10
10
10
10
10
10
12
7-24/64
8-16/64
8-32/64
8-48/64
9
9-16/64
9-32/64
9-48/64
10-32/64
10-48/64
10-56/64
11
11-16/64
11-32/64
11-48/64
11-48/64
SPS600724
SPS800816
SPS800832
SPS800848
SPS800900
SPS800916
SPS800932
SPS800948
SPS101032
SPS101048
SPS101056
SPS101100
SPS101116
SPS101132
SPS101148
SPS101148
36.76
62.46
62.46
62.46
62.46
62.46
62.46
62.46
118.00
118.00
118.00
118.00
118.00
118.00
118.00
POR
304 Stainless
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
1
1-4/64
1-8/64
1-12/64
1-16/64
1-20/64
1-24/64
1-28/64
1-32/64
1-36/64
1-40/64
1-44/64
1-48/64
1-40/64
1-48/64
1-52/64
1-56/64
1-60/64
2
2-4/64
2-8/64
2-12/64
2-16/64
2-20/64
2-24/64
2-8/64
2-16/64
2-24/64
2-28/64
2-32/64
2-36/64
2-40/64
2-44/64
2-48/64
2-52/64
2-56/64
2-60/64
3
3-8/64
3-16/64
SSS050100S
SSS075104S
SSS075108S
SSS075112S
SSS075116S
SSS075120S
SSS075124S
SSS100128S
SSS100132S
SSS100136S
SSS100140S
SSS100144S
SSS100148S
SSS125140S
SSS125148S
SSS125152S
SSS125156S
SSS150150S
SSS150200S
SSS150204S
SSS150208S
SSS150212S
SSS150216S
SSS150220S
SSS150224S
SSS200208S
SSS200216S
SSS200224S
SSS200228S
SSS200232S
SSS200236S
SSS200240S
SSS200244S
SSS200248S
SSS200252S
SSS200256S
SSS200260S
SSS250300S
SSS250308S
SSS250316S
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
7.20
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
8.58
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
12.33
16.08
16.08
16.08
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
8
3-24/64
3-32/64
3-8/64
3-16/64
3-24/64
3-28/64
3-32/64
3-36/64
3-40/64
3-44/64
3-48/64
3-52/64
3-56/64
3-60/64
4
4-16/64
4-24/64
4-32/64
4-36/64
4-40/64
4-44/64
4-48/64
4-52/64
4-56/64
4-60/64
5
6-16/64
6-24/64
6-32/64
6-40/64
6-48/64
6-56/64
7
7-8/64
7-16/64
7-24/64
SSS250324S
SSS250332S
SSS300308S
SSS300316S
SSS300324S
SSS300328S
SSS300332S
SSS300336S
SSS300340S
SSS300344S
SSS300348S
SSS300352S
SSS300356S
SSS300360S
SSS400400S
SSS400416S
SSS400424S
SSS400432S
SSS400436S
SSS400440S
SSS400444S
SSS400448S
SSS400452S
SSS400456S
SSS400460S
SSS400500S
SSS600616
SSS600624
SSS600632
SSS600640
SSS600648
SSS600656
SSS600700
SSS600708
SSS600716
SSS600724
SSS800XXX
16.08
16.08
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
16.54
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
27.50
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
69.10
POR
47
Glossary of CampbellCrimpnology™ Terms
Crimp chart: a chart designed to assist
in determining the crimp spec, which
includes allowances for serration style,
fitting and ferrule/sleeve O.D. and design.
Crimp spec (or specification): the
outside diameter of the ferrule/sleeve after
assembling and crimping.
Cut-slots: notches cut into the turned-in
end of a ferrule that allows the interlock
portion to crimp straight down into the
fitting interlock without opening outward
during crimping.
48
Ferrule: a tube-like product with one end
turned in so as to affect an interlock into a
groove on a mating fitting or coupling.
Ferrule length: the overall length of the
ferrule as measured from the turn-in end to
the open end.
Ferrule/Sleeve I.D.: the inside bowl
diameter of the ferrule; the inside diameter of
the sleeve; the inside diameter of either
where the hose is placed
Gauge: the thickness of the ferrule/sleeve
material.
Interlock groove: a groove designed into
the fitting/coupling to accept the turn-in end
of the ferrule.
Shank length: the hose barb area measured from the end of the fitting to the
interlock groove.
Sleeve: a tube-like product with no interlock
provisions.
Sleeve length: the overall length of the
sleeve from end to end.
Turn-in: the interlocking end of the ferrule.
®
H
49
H
Small Diameter Multi-Purpose Fittings
MALE & FEMALE
INSERT FITTINGS
BRASS GARDEN HOSE
COUPLINGS
Insert fittings are precision screw machined
in steel, stainless steel and brass.
Precision screw machined from brass.
Available with short shank or long shank.
Recommended use
Recommended use
• Low pressure air, water
• Low pressure water
• Brass Crimp-on Ferrules (Page 53)
• Worm Gear Clamps (Page 59)
• Preformed Band Clamps (Page 57)
• Brass Crimp-on Ferrules (Page 53)
• Worm Gear Clamps (Page 59)
• Preformed Band Clamps (Page 57)
BRASS PUSH-ON FITTINGS
BRASS FERRULES
Recommended use
• Low pressure air, water
• None. When used with special Push-on
Hose, no clamp or ferrule is needed. The
liner of the hose grabs securely onto the
barb of the fitting.
DO NOT use Push-on Fittings with
conventional hose.
50
Brass ferrules are lightweight, easy to
assemble, and provide a smooth outer
surface.
Recommended use
• Crimp-on hose assemblies to secure
hose and fittings for low-pressure air
and water applications
H
Brass
BARBED HOSE INSERTS
MALE INSERT
Plated Steel
hose x
npt
1/4 x 1/8
1/4 x 1/4
1/4 x 3/8
3/8 x 1/8
3/8 x 1/4
3/8 x 3/8
3/8 x 1/2
1/2 x 1/4
1/2 x 3/8
1/2 x 1/2
1/2 x 3/4
3/4 x 1/2
3/4 x 3/4
1 x 3/4
1x1
part
number
SM-0402
SM-0404
SM-0406
SM-0602
SM-0604
SM-0606
SM-0608
SM-0804
SM-0806
SM-0808
SM-0812
SM-1208
SM-1212
SM-1612
SM-1616
list
each
6.75
10.93
8.45
8.75
10.42
9.65
12.25
12.40
12.06
9.59
17.33
14.27
14.22
17.31
17.97
316 Stainless Steel
1/4 x 1/8
1/4 x 1/4
1/4 x 3/8
3/8 x 1/4
3/8 x 3/8
3/8 x 1/2
1/2 x 1/4
1/2 x 3/8
1/2 x 1/2
1/2 x 3/4
5/8 x 1/2
3/4 x 1/2
3/4 x 3/4
3/4 x 1
1 x 3/4
1x1
SSM-0402
SSM-0404
SSM-0406
SSM-0604
SSM-0606
SSM-0608
SSM-0804
SSM-0806
SSM-0808
SSM-0812
SSM-1008
SSM-1208
SSM-1212
SSM-1216
SSM-1612
SSM-1616
hose x
npt
1/4 x 1/8
1/4 x 1/4
1/4 x 3/8
5/16 x 1/8
5/16 x 1/4
3/8 x 1/8
3/8 x 1/4
3/8 x 3/8
3/8 x 1/2
1/2 x 1/4
1/2 x 3/8
1/2 x 1/2
1/2 x 3/4
5/8 x 3/8
5/8 x 1/2
5/8 x 3/4
3/4 x 1/2
3/4 x 3/4
1 x 3/4
1x1
1-1/4 x 1
part
number
BM-0402
BM-0404
BM-0406
BM-0502
BM-0504
BM-0602
BM-0604
BM-0606
BM-0608
BM-0804
BM-0806
BM-0808
BM-0812
BM-1006
BM-1008
BM-1012
BM-1208
BM-1212
BM-1612
BM-1616
BM-2016
list/
100
184.00
184.00
284.00
189.00
231.00
231.00
184.00
284.00
498.00
284.00
296.00
415.00
628.00
355.00
455.99
621.00
509.00
598.00
776.00
1256.00
1682.00
carton
qty.
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
part
number
BF-0402
BF-0404
BF-0504
BF-0604
BF-0606
BF-0806
BF-0808
list/
100
213.00
260.00
320.00
267.00
350.00
401.99
503.00
carton
qty.
25
25
25
25
25
25
25
part
number
BH-0404
BH-0505
BH-0606
BH-0808
BH-1010
BH-1212
list/
100
184.00
207.00
225.00
308.00
401.99
503.00
carton
qty.
25
25
25
25
25
25
part
number
BFS-0404
BFS-0504
BFS-0604
BFS-0606
BFS-0806
BFS-0808
BFS-1212
list/
100
314.00
308.00
290.00
415.00
498.00
657.00
888.00
carton
qty.
25
25
25
25
25
25
25
FEMALE INSERT
Brass
hose x
npt
1/4 x 1/8
1/4 x 1/4
5/16 x 1/4
3/8 x 1/4
3/8 x 3/8
1/2 x 3/8
1/2 x 1/2
HOSE MENDER
30.97
11.30
28.65
25.07
24.01
43.60
23.39
28.35
39.50
54.50
52.65
52.65
71.23
118.47
60.70
91.35
Brass
hose
size
1/4
5/16
3/8
1/2
5/8
3/4
FEMALE SWIVEL
(with ball seat)
Brass
hose x
npsm
1/4 x 1/4
5/16 x 1/4
3/8 x 1/4
3/8 x 3/8
1/2 x 3/8
1/2 x 1/2
3/4 x 3/4
51
PHONE 800-367-3678
FAX 800-367-3670
OXYGEN ACETYLENE FITTINGS
BRASS PUSH-ON FITTINGS
OXYGEN HOSE END
(9/16-18 right hand thread)
Brass
hose
size
3/16
1/4
5/16
3/8
part
number
ORH-03
ORH-04
ORH-05
ORH-06
MALE PUSH-ON
list
each
3.32
3.32
3.32
3.32
carton
qty.
25
25
25
25
list
each
3.32
3.32
3.32
3.32
carton
qty.
25
25
25
25
ACETYLENE HOSE END
(9/16-18 left hand thread)
Brass
hose
size
3/16
1/4
5/16
3/8
part
number
ALH-03
ALH-04
ALH-05
ALH-06
hose x
npt
1/4 x 1/8
1/4 x 1/4
1/4 x 3/8
5/16 x 1/4
3/8 x 1/8
3/8 x 1/4
3/8 x 3/8
3/8 x 1/2
1/2 x 1/4
1/2 x 3/8
1/2 x 1/2
1/2 x 3/4
5/8 x 1/2
5/8 x 3/4
3/4 x 1/2
3/4 x 3/4
part
number
BMP-0402
BMP-0404
BMP-0406
BMP-0504
BMP-0602
BMP-0604
BMP-0606
BMP-0608
BMP-0804
BMP-0806
BMP-0808
BMP-0812
BMP-1008
BMP-1012
BMP-1208
BMP-1212
list/
100
225.00
255.00
320.00
284.00
272.00
267.00
320.00
485.00
379.00
350.00
462.00
693.00
669.00
852.00
770.00
763.00
carton
qty.
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
part
number
BFP-0402
BFP-0404
BFP-0504
BFP-0604
BFP-0606
BFP-0806
BFP-0808
list/
100
284.00
308.00
386.00
350.00
391.00
433.00
515.00
carton
qty.
25
25
25
25
25
25
25
list/
100
290.00
314.00
320.00
498.00
657.00
799.00
carton
qty.
25
25
25
25
25
25
FEMALE PUSH-ON
hose x
npt
1/4 x 1/8
1/4 x 1/4
5/16 x 1/4
3/8 x 1/4
3/8 x 3/8
1/2 x 3/8
1/2 x 1/2
HOSE MENDER PUSH-ON
hose
size
1/4
5/16
3/8
1/2
5/8
3/4
52
part
number
BHP-0404
BHP-0505
BHP-0606
BHP-0808
BHP-1010
BHP-1212
H
MALE LONG SHANK
MACHINED BRASS
GARDEN HOSE COUPLINGS
hose
size
1/2
5/8
3/4
1(NPSH)
part
number
GHML-08
GHML-10
GHML-12
NPML-16
list
each
7.35
7.35
7.35
20.49
carton
qty.
25
25
25
25
part
number
GHW-12
GHW-16
list/
100
27.00
49.00
carton
qty.
100
100
WASHER
Neoprene
washer
size
3/4
1
BRASS FERRULES
GARDEN HOSE SET
hose
size
3/8
1/2
5/8
3/4
1(NPSH)
part
number
GHS-06
GHS-08
GHS-10
GHS-12
NPS-16
list
each
12.08
11.96
12.25
12.55
30.91
carton
qty.
25
25
25
25
25
list
each
6.52
6.52
6.52
6.80
17.52
carton
qty.
25
25
25
25
25
part
number
GHM-06
GHM-08
GHM-10
GHM-12
NPM-16
list
each
5.55
5.45
5.74
5.74
13.38
carton
qty.
25
25
25
25
25
part
number
GHSL-08
GHSL-10
GHSL-12
NPSL-16
list
each
15.69
15.69
16.04
39.55
carton
qty.
25
25
25
25
list
each
8.35
8.35
8.70
19.06
carton
qty.
25
25
25
25
GARDEN HOSE FEMALE
hose
size
3/8
1/2
5/8
3/4
1(NPSH)
part
number
GHF-06
GHF-08
GHF-10
GHF-12
NPF-16
GARDEN HOSE MALE
hose
size
3/8
1/2
5/8
3/4
1(NPSH)
LONG SHANK SET
hose
size
1/2
5/8
3/4
1(NPSH)
FEMALE LONG SHANK
hose
size
1/2
5/8
3/4
1(NPSH)
part
number
GHFL-08
GHFL-10
GHFL-12
NPFL-16
i.d. x
length
0.410 x 0.500
0.450 x 0.563
0.478 x 0.687
0.500 x 0.500
0.500 x 1.000
0.525 x 0.500
0.525 x 1.000
0.531 x 1.000
pierce
dia.
0.266
0.344
0.328
0.344
0.344
0.344
0.375
0.438
part
number
F-222
F-316
F-157
F-225
F-265
F-230
F-268
F-273
list/
100
33.60
33.60
46.20
33.60
58.80
33.60
60.90
63.00
bag
qty.
50
50
50
50
50
50
50
50
0.548 x 0.484
0.562 x 1.000
0.575 x 0.484
0.593 x 1.000
0.600 x 0.500
0.625 x 0.500
0.625 x 1.000
0.650 x 0.500
0.375
0.438
0.468
0.438
0.500
0.500
0.438
0.500
F-236
F-278
F-031
F-284
F-030
F-028
F-288
F-025
33.60
66.15
38.85
68.25
38.85
40.95
72.44
40.95
50
50
50
50
50
50
50
50
0.656 x 1.000
0.675 x 0.516
0.687 x 1.000
0.700 x 0.516
0.718 x 1.000
0.718 x 1.000
0.725 x 0.531
0.750 x 0.531
0.750 x 1.000
0.750 x 1.000
0.438
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.625
0.500
F-294
F-022
F-300
F-018
F-302
F-302B
F-016
F-013
F-305
F-305B
75.60
44.10
75.60
80.85
80.85
79.80
44.10
46.20
80.85
77.70
50
50
50
50
50
50
50
50
50
50
0.775 x 0.563
0.782 x 1.000
0.782 x 1.000
0.800 x 0.563
0.812 x 1.000
0.825 x 0.547
0.875 x 0.844
0.937 x 0.844
0.975 x 0.844
1.150 x 0.844
0.500
0.625
0.500
0.562
0.625
0.562
0.688
0.688
0.688
0.875
F-009
79.80
F-310
85.05
F-310B
85.05
F-008
–
F-314
87.15
F-001
88.20
F-255
75.60
F-242
127.05
F-181
92.40
F-241
109.20
50
50
50
50
50
50
50
50
50
50
Please order by part number.
53
PHONE 800-367-3678
FAX 800-367-3670
54
®
I
55
I
Multi-Purpose Clamps & Tools
PREFORMED BAND CLAMPS
BANDING AND BUCKLES
Banding is cartoned in 100 foot rolls and available in 201
stainless steel. Buckles, sold separately, are 201 stainless
steel. Banding features specially rolled edges to reduce the
possibility of injury. Use the C001 Banding Tool (Page 59)
to install.
WORM GEAR CLAMPS
All band clamps, banding, tools and accessories
are genuine Band-It products. Ultra-Lok® and Jr®
are registered trademarks of Band-It®.
ULTRA-LOK® CLAMPS
Worm gear clamps are available in standard 1/2” band,
miniature 5/16” band and quick release 1/2” band. All are
manufactured with stainless steel band and stainless steel
housing, with your choice of a carbon steel or stainless
steel screw.
Ultra-Lok® Clamps are manufactured from 201 Stainless
Steel. The buckle is thicker and stronger than standard
band clamps for superior holding strength.
The powerful Ultra-Lok® Tool is portable which enables
the operator to bring the tool to the hose, instead of the
hose to the tool, for much easier assembly.
JR®-TYPE PREFORMED CLAMPS
®
Jr -type preformed clamps are available in both galvanized
carbon steel and 201 stainless steel. All buckles are
stainless steel.
Jr® clamps are designed for use with high production air
tools, or the C001 Banding Tool (Page 57).
PUNCH-TYPE PREFORMED CLAMPS
Punch type preformed clamps are available in galvanized
carbon steel and 201 stainless steel. All buckles are
stainless steel.
Punch clamps are designed for use with the punch style tool
(Page 58) for the ultimate in field serviceability.
56
T-BOLT CLAMPS
T-Bolt clamps provide 360 degrees of sealing surface, and
are particularly useful for high torque applications.
I
®
BAND CLAMPS, BANDING,
AND BUCKLES
5/8
clamp
width
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
clamp
i.d.
2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
9
part
number
UL227
UL210
UL211
UL212
UL213
UL214
UL215
UL270
UL216
UL217
UL218
UL219
UL228
list/
100
822.00
896.00
971.00
1033.00
1186.00
1273.00
1376.00
1428.00
1582.00
1744.00
1904.00
2144.00
2400.00
carton
qty.
100
50
50
50
25
25
25
25
25
25
25
25
10
Jr ®-TYPE PREFORMED-SMOOTH I.D.
Band: Galvanized Steel
Buckle: 201 Stainless
1-1/2
1-3/4
2
2-1/4
2-1/2
JS305
JS306
JS307
JS308
JS309
198.00
219.00
240.00
255.00
275.99
100
100
100
100
100
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/4
6
7
8
JS327
JS310
JS311
JS312
JS313
JS314
JS315
JS370
JS316
JS318
JS319
294.00
330.00
348.00
375.00
434.00
458.00
501.00
617.00
576.00
683.00
971.00
100
50
50
50
25
25
25
25
25
25
25
2-1/2
JS309
138.52
50
Band: 201 Stainless
ULTRA-LOK® SMOOTH I.D. CLAMPS
Band: 201 Stainless
5/8
5/8
5/8
5/8
5/8
clamp
width
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
clamp
i.d.
13/16
1
1-3/8
2
2-1/2
3
3-1/2
4
part
number
JS301
JS343
JS302
JS345
JS321
JS346
JS355
JS348
list/
100
115.00
120.00
126.00
157.00
232.00
202.00
291.00
320.00
carton
qty.
100
100
100
100
100
100
100
100
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1
1-1/4
1-1/2
1-3/4
2
2-1/2
2-3/4
3
3-1/2
4
JS303
JS304
JS331
JS336
JS337
JS333
JS330
JS334
JS347
JS349
153.00
168.00
190.00
222.00
230.00
244.00
264.00
293.00
330.00
371.00
100
100
100
100
100
100
100
100
100
100
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
13/16
1
1-3/8
1-1/2
2
2-1/2
2-3/4
3
3-1/2
4
4-1/2
JS240
JS242
JS241
JS252
JS253
JS220
JS256
JS244
JS257
JS258
JS259
270.00
272.00
296.00
294.00
329.00
366.00
393.00
389.00
417.00
505.99
596.00
100
100
100
100
100
100
100
100
100
100
100
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
13/16
1
1-3/8
2
2-1/2
3
3-1/2
4
JS201
JS243
JS202
JS245
JS221
JS246
JS255
JS248
280.00
322.00
315.00
357.00
407.00
457.00
562.00
541.00
100
100
100
100
100
100
100
100
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1
1-1/4
1-1/2
1-3/4
2
2-1/2
2-3/4
3
3-1/2
4
JS203
JS204
JS231
JS236
JS237
JS233
JS230
JS234
JS247
JS249
390.00
430.00
495.00
562.00
589.00
618.00
649.00
718.00
788.00
860.00
100
100
100
100
100
100
100
100
100
100
5/8
5/8
5/8
5/8
5/8
1-1/2
1-3/4
2
2-1/4
2-1/2
JS205
JS206
JS207
JS208
JS209
518.00
572.00
626.99
667.00
712.00
100
100
100
100
100
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/4
6
7
8
JS227
JS210
JS211
JS212
JS213
JS214
JS215
JS270
JS216
JS218
JS219
775.00
844.00
915.00
973.00
1117.00
1199.00
1296.00
1346.00
1491.00
1794.00
2020.00
100
50
50
50
25
25
25
25
25
25
25
57
PHONE 800-367-3678
FAX 800-367-3670
I.D. TAG IMPRINTERS
PUNCH-TYPE PREFORMED
Band: Galvanized Steel
clamp
width
3/8
3/8
clamp
i.d.
13/16
1-3/8
part
number
CP3
CP311
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
6
7
8
CP4
CP5
CP6
CP7
CP8
CP9
CP10
CP11
CP12
CP14
CP16
CP18
CP20
CP24
CP28
CP32
list/
100
83.00
98.00
carton
qty.
100
100
98.00
103.00
110.00
121.00
129.00
137.98
166.00
174.00
182.00
195.00
224.00
237.00
250.00
272.00
314.00
440.00
100
100
100
100
100
100
50
50
50
50
25
25
25
25
25
25
Band: 201 Stainless
character
wheel
3/32”
1/16”
1/8”
3/16”
1/4”
13/16
1-3/8
CP3-S
CP311-S
193.00
221.00
100
100
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
6
7
8
CP4-S
CP5-S
CP6-S
CP7-S
CP8-S
CP9-S
CP10-S
CP11-S
CP12-S
CP14-S
CP16-S
CP18-S
CP20-S
CP24-S
CP28-S
CP32-S
293.00
308.00
327.00
359.00
379.00
404.00
438.00
464.00
485.00
535.00
607.00
654.00
703.00
794.00
945.00
1033.00
100
100
100
100
100
100
50
50
50
50
25
25
25
25
25
25
kit contains:
• 1 tie-lok tool
• 200 i.d. tags (3/4 x 2)
• 100 i.d. tags (1-1/2 x 2-1/2)
• 100 tie-loks (1/4 x 8)
• 200 tie-loks (1/4 x 14-1/2)
• 100 tie-loks (1/4 x 21)
304 Stainless
length
in.
10
16-1/2
22-1/2
29
35
I.D. TAGS
304 Stainless
YOUR NAME
58
width
in.
3/4
1-1/2
3/4
length
in.
2
2-1/2
3-1/2
part
number
AS211
AS212
AS213
AS214
AS215
list/
100
254.00
333.00
412.00
494.00
568.00
carton
qty.
100
100
100
100
100
carton
qty.
1
1
1
1
1
part
number
ID300
list
each
POR
carton
qty.
1
ULTRA-LOK ELECTRIC INSTALLATION TOOL
description
list each
for Ultra-Lok Preformed Clamps
POR
STANDARD AIR TOOL & COMPONENTS
part
number
S750
description
with S180 head
list
each
POR
CENTER PUNCH TOOLS & ACCESSORIES
part
number
T300
I.D. TIE-LOK TIES
width
in.
1/4
1/4
1/4
1/4
1/4
list
each
POR
POR
POR
POR
POR
HANDY I.D. KIT
part number
UL9010
3/8
3/8
part
number
ID200
ID202
ID203
ID204
ID205
description
for 5/8” wide clamps
list
each
POR
COMPACT TOOL SET
part
number
S38
list
each
POR
part
number
C001
list
each
POR
BAND TOOL
part
number
ID100
ID101
ID102
list/
100
194.00
266.00
255.00
carton
qty.
100
100
100
I
®
BAND TOOL ADAPTER
part
number
J001
J050
description
Jr adapter
heavy duty adapter
list
each
POR
POR
WORM GEAR CLAMPS
TIE-LOK TOOL
part
number
A920
list
each
POR
BAND
201 Stainless Steel
band
width
1/4
3/8
1/2
5/8
3/4
part
number
C202
C203
C204
C205
C206
list/
100 ft.
126.39
164.63
222.52
269.29
332.09
carton
qty.
100 ft.
100 ft.
100 ft.
100 ft.
100 ft.
Galvanized Carbon Steel
3/8
1/2
5/8
3/4
C303
C304
C305
C306
75.69
98.14
121.08
143.45
100 ft.
100 ft.
100 ft.
100 ft.
BUCKLES
201 Stainless Steel
band
width
1/4
3/8
1/2
5/8
3/4
part
number
C252
C253
C254
C255
C256
list/
100
103.00
113.99
154.00
192.00
232.00
carton
qty.
100
100
100
100
100
Galvanized Carbon Steel
3/8
1/2
5/8
3/4
C353
C354
C355
C356
59.00
77.00
91.00
108.00
100
100
100
100
STANDARD WORM GEAR
(5/16" screw, 1/2" band)
Screw: Galvanized Steel
Band: 301 Stainless Steel
size
range
3/8 x 7/8
7/16 x 1
9/16 x 1-1/16
9/16 x 1-1/4
11/16 x 1-1/2
3/4 x 1-3/4
1-1/16 x 2
1-5/16 x 2-1/4
part
number
WGCS-6
WGCS-8
WGCS-10
WGCS-12
WGCS-16
WGCS-20
WGCS-24
WGCS-28
list/ carton
100
qty.
153.02
10
153.02
10
153.02
10
160.21
10
160.21
10
160.21
10
160.21
10
160.21
10
1-9/16 x 2-1/2
1-13/16 x 2-3/4
2-1/16 x 3
2-5/16 x 3-1/4
2-9/16 x 3-1/2
2-13/16 x 3-3/4
3-1/16 x 4
3-5/16 x 4-1/4
WGCS-32
WGCS-36
WGCS-40
WGCS-44
WGCS-48
WGCS-52
WGCS-56
WGCS-60
160.21
165.35
209.51
239.29
239.29
261.89
261.89
274.21
10
10
10
10
10
10
10
10
3-9/16 x 4-1/2
4-1/16 x 5
4-5/8 x 5-1/2
4-3/32 x 6
4-1/2 x 6-1/2
5x7
6-1/2 x 8-1/2
8 x 10
WGCS-64
WGCS-72
WGCS-80
WGCS-88
WGCS-96
WGCS-104
WGCS-128
WGCS-152
274.21
291.67
337.88
344.05
350.21
355.34
478.58
513.30
10
10
10
10
10
10
10
10
10-1/4 x 12-1/4
11 x 13
11-3/4 x 13-3/4
12-1/2 x 14-1/2
14 x 16
15-3/8 x 17-3/8
18 x 20
19-1/8 x 21-1/4
22-7/8 x 24-7/8
WGCS-188
WGCS-200
WGCS-212
WGCS-224
WGCS-248
WGCS-270
WGCS-312
WGCS-332
WGCS-390
565.88
589.50
635.71
699.39
805.17
875.00
979.75
1003.38
1014.68
10
10
10
10
10
10
10
10
10
STANDARD WORM GEAR
(continued on next page)
59
PHONE 800-367-3678
FAX 800-367-3670
QUICK RELEASE WORM GEAR
(5/16" screw, 1/2" band)
STANDARD WORM GEAR (continued from previous page)
Screw: 305 Stainless Steel
size
range
3/8 x 7/8
7/16 x 1
9/16 x 1-1/16
9/16 x 1-1/4
11/16 x 1-1/2
3/4 x 1-3/4
1-1/16 x 2
1-5/16 x 2-1/4
part
number
WGSS-6
WGSS-8
WGSS-10
WGSS-12
WGSS-16
WGSS-20
WGSS-24
WGSS-28
list/ carton
100
qty.
198.21
10
198.21
10
198.21
10
205.40
10
205.40
10
211.56
10
211.56
10
211.56
10
1-9/16 x 2-1/2
1-13/16 x 2-3/4
2-1/16 x 3
2-5/16 x 3-1/4
2-9/16 x 3-1/2
2-13/16 x 3-3/4
3-1/16 x 4
3-5/16 x 4-1/4
WGSS-32
WGSS-36
WGSS-40
WGSS-44
WGSS-48
WGSS-52
WGSS-56
WGSS-60
211.56
223.89
249.56
285.50
285.50
303.99
303.99
317.34
10
10
10
10
10
10
10
10
3-9/16 x 4-1/2
4-1/16 x 5
4-5/8 x 5-1/2
4-3/32 x 6
4-1/2 x 6-1/2
5x7
6-1/2 x 8-1/2
8 x 10
WGSS-64
WGSS-72
WGSS-80
WGSS-88
WGSS-96
WGSS-104
WGSS-128
WGSS-152
317.34
349.18
360.48
404.64
415.94
415.94
622.35
685.01
10
10
10
10
10
10
10
10
10-1/4 x 12-1/4
11 x 13
11-3/4 x 13-3/4
12-1/2 x 14-1/2
14 x 16
15-3/8 x 17-3/8
18 x 20
WGSS-188
WGSS-200
WGSS-212
WGSS-224
WGSS-248
WGSS-270
WGSS-312
746.63
758.95
796.95
852.41
1046.51
1109.16
1201.59
10
10
10
10
10
10
10
MINIATURE WORM GEAR
(1/4" screw, 5/16" band)
size
range
7/32 x 5/8
7/16 x 11/16
5/16 x 7/8
7/16 x 1
1/2 x 1-1/16
9/16 x 1-1/4
11/16 x 1-1/2
7/8 x 1-3/4
part
number
MGCS-4
MGCS-5
MGCS-6
MGCS-8
MGCS-10
MGCS-12
MGCS-16
MGCS-20
list/ carton
100
qty.
117.07
10
117.07
10
128.38
10
139.67
10
139.67
10
145.83
10
145.83
10
152.00
10
7/32 x 5/8
7/16 x 11/16
5/16 x 7/8
7/16 x 1
1/2 x 1-1/16
9/16 x 1-1/4
11/16 x 1-1/2
7/8 x 1-3/4
60
MGSS-4
MGSS-5
MGSS-6
MGSS-8
MGSS-10
MGSS-12
MGSS-16
MGSS-20
148.92
148.92
160.21
180.75
180.75
193.08
193.08
198.21
10
10
10
10
10
10
10
10
size
range
1/2 x 1-1/4
3/4 x 1-3/4
1 x 2-1/4
1 x 2-3/4
1-1/2 x 3-1/2
1x4
2x5
2-1/16 x 6
part
number
QGCS-12
QGCS-20
QGCS-28
QGCS-36
QGCS-48
QGCS-56
QGCS-72
QGCS-88
list/ carton
100
qty.
217.72
10
221.83
10
230.05
10
231.08
10
250.59
10
268.05
10
309.12
10
361.50
10
1-3/4 x 7
1-3/4 x 8-9/16
2 x 10
2-1/16 x 12-5/16
QGCS-104
QGCS-128
QGCS-152
QGCS-188
448.80
448.80
653.17
530.96
10
10
10
10
1/2 x 1-1/4
3/4 x 1-3/4
1 x 2-1/4
1 x 2-3/4
1-1/2 x 3-1/2
1x4
2x5
2-1/16 x 6
QGSS-12
QGSS-20
QGSS-28
QGSS-36
QGSS-48
QGSS-56
QGSS-72
QGSS-88
283.44
302.97
323.51
329.67
417.99
429.29
436.48
516.58
10
10
10
10
10
10
10
10
1-3/4 x 7
1-3/4 x 8-9/16
2 x 10
2-1/16 x 12-5/16
10-3/16 x 14
10 x 16
14-1/4 x 18
14 x 20
QGSS-104
QGSS-128
QGSS-152
QGSS-188
QGSS-216
QGSS-248
QGSS-280
QGSS-312
585.39
585.39
624.42
672.69
734.31
822.63
896.57
1066.03
10
10
10
10
10
10
10
10
I
®
Bolt & Trunion: Stainless Steel
Band: Stainless Steel
T-BOLT CLAMPS
T-BOLT CLAMPS
Bolt & Trunion: Galvanized Steel
Band: Stainless Steel
size
range
1.31 x 1.56
1.56 x 1.81
1.69 x 1.94
1.81 x 2.06
2.06 x 2.31
2.19 x 2.50
2.31 x 2.62
2.38 x 2.69
2.44 x 2.75
2.56 x 2.87
2.69 x 3.00
2.81 x 3.12
2.94 x 3.25
3.06 x 3.37
3.31 x 3.62
3.56 x 3.87
3.63 x 3.94
3.81 x 4.12
4.06 x 4.37
4.31 x 4.62
4.56 x 4.87
4.81 x 5.12
5.06 x 5.37
5.31 x 5.62
5.56 x 5.87
5.81 x 6.12
6.06 x 6.37
6.31 x 6.62
6.56 x 6.87
6.81 x 7.12
7.06 x 7.37
7.31 x 7.62
7.56 x 7.87
7.81 x 8.12
8.06 x 8.37
8.69 x 9.19
10.63 x 11.13
12.63 x 13.13
part
number
TBCS-21
TBCS-25
TBCS-27
TBCS-29
TBCS-33
TBCS-35
TBCS-37
TBCS-38
TBCS-39
TBCS-41
TBCS-43
TBCS-45
TBCS-47
TBCS-49
TBCS-53
TBCS-57
TBCS-58
TBCS-61
TBCS-65
TBCS-69
TBCS-73
TBCS-77
TBCS-81
TBCS-85
TBCS-89
TBCS-93
TBCS-97
TBCS-101
TBCS-105
TBCS-109
TBCS-113
TBCS-117
TBCS-121
TBCS-125
TBCS-129
TBCS-139
TBCS-170
TBCS-202
list
each
9.69
9.69
9.69
9.69
9.89
9.89
9.89
9.89
9.65
9.65
9.65
10.12
10.12
10.12
10.12
10.12
10.12
10.12
10.12
10.12
10.12
10.40
10.40
10.50
10.50
10.31
10.31
10.31
10.31
10.50
11.17
11.17
11.17
11.17
11.01
12.02
13.37
13.73
1.31 x 1.56
1.56 x 1.81
1.69 x 1.94
1.81 x 2.06
2.06 x 2.31
2.19 x 2.50
2.31 x 2.62
2.38 x 2.69
2.44 x 2.75
2.56 x 2.87
2.69 x 3.00
2.81 x 3.12
2.94 x 3.25
3.06 x 3.37
3.31 x 3.62
3.56 x 3.87
3.63 x 3.94
3.81 x 4.12
4.06 x 4.37
4.31 x 4.62
4.56 x 4.87
4.81 x 5.12
5.06 x 5.37
5.31 x 5.62
5.56 x 5.87
5.81 x 6.12
6.06 x 6.37
6.31 x 6.62
6.56 x 6.87
6.81 x 7.12
7.06 x 7.37
7.31 x 7.62
7.56 x 7.87
7.81 x 8.12
8.06 x 8.37
8.69 x 9.19
10.63 x 11.13
12.63 x 13.13
TBSS-21
TBSS-25
TBSS-27
TBSS-29
TBSS-33
TBSS-35
TBSS-37
TBSS-38
TBSS-39
TBSS-41
TBSS-43
TBSS-45
TBSS-47
TBSS-49
TBSS-53
TBSS-57
TBSS-58
TBSS-61
TBSS-65
TBSS-69
TBSS-73
TBSS-77
TBSS-81
TBSS-85
TBSS-89
TBSS-93
TBSS-97
TBSS-101
TBSS-105
TBSS-109
TBSS-113
TBSS-117
TBSS-121
TBSS-125
TBSS-129
TBSS-139
TBSS-170
TBSS-202
13.30
13.30
13.30
13.30
13.30
13.30
13.30
13.31
13.31
13.31
13.31
13.31
13.31
13.52
13.52
13.52
13.52
13.52
13.67
13.67
14.46
14.46
14.57
14.76
14.76
14.98
14.98
14.98
14.98
14.98
15.26
15.69
15.69
15.69
16.09
17.18
19.14
19.55
All T-Bolt Clamps are packaged 10 per bag.
61
PHONE 800-367-3678
FAX 800-367-3670
62
®
IMPORTED PRODUCTS
J
63
J
Imported Fittings, Couplings, Clamps, and Accessories
The primary goal of providing imported
products is to offer a convenient and
consistent source for low-cost commodity hose fittings to our customers.
While imported products are rarely
innovative or technologically advanced,
they do fill a need when economy is of
primary importance.
Campbell makes no claims as to
performance or pressure ratings for any
products in Section J.
64
COBRA
Please note: we are now cataloging our line of Cobra
Cam & Groove Couplings in Section C (pages 17 thru 24)
joining the Campbell Cobra part C's and E's. Campbell
Cobra C's and E's are designed for use with ferrules.
Standard Cobra C's and E's can be used with sleeves.
Part A
Part B
Part C
Part D
Part E
Part F
Part DC
Part DP
FEMALE SHANK
COMBINATION
NIPPLES
Shank: Aluminum
Nut: Brass
THREADED
Steel
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
8
part
list
number
each
CNPS-50
2.38
CNPS-75
2.58
CNPS-100
3.20
CNPS-125
4.39
CNPS-150
5.04
CNPS-200
6.14
CNPS-250 13.62
CNPS-300 16.08
CNPS-400 24.21
CNPS-600 70.15
CNPS-800 140.91
Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
Shanks: Aluminum
Nut: Brass
list
each
11.73
17.38
32.23
36.21
63.88
150.58
Shanks: Brass
Nut: Brass
hose
size
1-1/2
2
3
4
part
number
CBB-150
CBB-200
CBB-300
CBB-400
list
each
8.20
11.92
20.31
24.32
43.18
102.01
Shank: Brass
Nut: Brass
1-1/2
2
3
4
FBB-150
FBB-200
FBB-300
FBB-400
25.14
42.53
89.80
162.21
MALE SHANK
hose
size
1-1/2
2
2-1/2
3
4
6
part
number
MA-150
MA-200
MA-250
MA-300
MA-400
MA-600
list
each
4.52
6.30
11.52
14.34
24.02
50.86
Brass
1-1/2
2
3
4
MB-150
MB-200
MB-300
MB-400
21.90
32.78
78.29
128.61
list
each
50.68
71.99
160.27
316.17
Shanks: Steel/Ductile
Hex Nut: Ductile Iron
part
number
SLS-50
SLS-75
SLS-100
SLS-125
SLS-150
SLS-200
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
part
number
FLS-50
FLS-75
FLS-100
FLS-125
FLS-150
FLS-200
list
each
12.29
12.29
12.66
12.99
15.08
20.60
1/2
3/4
1
1-1/4
1-1/2
2
FLB-50
FLB-75
FLB-100
FLB-125
FLB-150
FLB-200
20.53
20.53
25.87
38.77
45.21
63.09
MALE LONG SHANK
Shank: Steel/Ductile
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
part
number
MLS-50
MLS-75
MLS-100
MLS-125
MLS-150
MLS-200
list
each
8.86
8.86
9.43
9.51
11.42
16.76
Shanks: Brass
1/2
3/4
1
1-1/4
1-1/2
2
MLB-50
MLB-75
MLB-100
MLB-125
MLB-150
MLB-200
16.45
16.45
18.48
33.22
41.27
57.68
WASHER (Neoprene)
COMPLETE SET
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
Shank: Steel/Ductile
Hex Nut: Ductile Iron
Shank: Brass
Hex Nut: Brass
LONG SHANK
SUCTION HOSE
COUPLINGS
COMPLETE SET
part
number
CAB-150
CAB-200
CAB-250
CAB-300
CAB-400
CAB-600
part
number
FAB-150
FAB-200
FAB-250
FAB-300
FAB-400
FAB-600
Aluminum
CNSS-50
8.79
CNSS-75
8.94
CNSS-100 12.27
CNSS-125 16.21
CNSS-150 18.64
CNSS-200 24.85
CNSS-250 41.67
CNSS-300 46.82
CNSS-400 73.94
CNSS-600 243.12
SUCTION HOSE
COUPLINGS
hose
size
1-1/2
2
2-1/2
3
4
6
hose
size
1-1/2
2
2-1/2
3
4
6
J
FEMALE LONG SHANK
list
each
19.32
19.32
20.71
22.72
26.70
37.47
size
1-1/4
1-1/2
2
2-1/2
3
4
6
part
number
WN-5
WN-6
WN-8
WN-10
WN-12
WN-16
WN-24
list
each
0.69
0.69
0.76
0.90
1.42
1.76
7.14
Shanks: Brass
Hex Nut: Brass
1/2
3/4
1
1-1/4
1-1/2
2
SLB-50
SLB-75
SLB-100
SLB-125
SLB-150
SLB-200
39.74
39.74
45.08
78.25
92.91
134.03
65
MALE NPT
SUCTION HOSE
COUPLINGS
(NST threads)
npt
size
1/4
3/8
1/2
3/4
1
COMPLETE SET
Shanks: Aluminum
Nut: Brass
hose
size
1-1/2
2-1/2
part
number
NSTA-150
NSTA-250
list
each
19.28
36.95
Shanks: Ductile Iron
Nut: Ductile Iron
1-1/2
2-1/2
NSTD-150
NSTD-250
22.36
59.13
part
number
ME-25
ME-37
ME-50
ME-75
ME-100
list
each
4.73
4.73
4.52
4.64
5.45
UNIVERSAL 3-WAY (Two Lug)
size
range
all
part
number
TWC
list
each
11.11
DEAD END (Two Lug)
size
range
all
Shanks: Brass
Nut: Brass
1-1/2
2-1/2
FEMALE NPT
NSTB-150 64.92
NSTB-250 142.15
part
number
UD
list
each
5.20
part
number
SC
list
each
0.37
SAFETY CLIP
UNIVERSAL
COUPLINGS
(includes safety clip)
size
all
WASHER (Two lug)
HOSE END
hose
size
3/8
1/2
3/4
1
Neoprene
part
number
HE-37
HE-50
HE-75
HE-100
list
each
3.95
3.95
4.31
5.45
size
range
all
part
number
HE-125
HE-150
HE-200
list
each
14.42
16.08
20.00
FEMALE NPT
npt
size
1/4
3/8
1/2
3/4
1
part
number
FE-25
FE-37
FE-50
FE-75
FE-100
list
each
4.73
4.73
4.52
4.64
5.25
size
range
all
66
part
number
FE-125
FE-150
FE-200
list
each
14.27
14.60
16.46
part
number
FW
list
each
1.69
ALUMINUM
SAND BLAST
COUPLINGS
hose
size
3/4
1
1-1/4
1-1/2
part
number
SBF-125
SBF-150
list
each
10.93
11.26
part
number
SBW
list
each
1.15
WASHER
size
all
GROUND JOINT
COUPLINGS
(with copper seat)
SEE WARNING BELOW
FEMALE SET
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
part
number
GF-50
GF-75
GF-100
GF-125
GF-150
GF-200
GF-250
GF-300
GF-400
list
each
27.39
29.82
29.82
50.44
52.64
74.95
153.15
197.30
323.51
part
number
GS-50
GS-75
GS-100
GS-125
GS-150
GS-200
GS-250
GS-300
GS-400
list
each
8.86
7.72
9.44
14.77
15.61
19.93
41.74
54.23
98.18
part
number
N-50
N-75
N-75
N-125
N-125
N-200
N-250
N-300
N-400
list
each
6.26
9.37
9.37
15.03
15.03
27.65
55.11
60.85
107.23
HOSE STEM
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
WING NUT
HOSE END
FEMALE NPT (Four Lug)
npt
size
1-1/4
1-1/2
2
list
each
0.75
WASHER (Four lug)
HOSE END (Four Lug)
hose
size
1-1/4
1-1/2
2
part
number
UG
npt
size
1-1/4
1-1/2
part
number
SBH-75
SBH-100
SBH-125
SBH-150
list
each
9.80
10.31
15.02
17.19
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
FEMALE SPUD
NOZZLE
hose
size
3/4
1
1-1/4
1-1/2
part
number
SBN-75
SBN-100
SBN-125
SBN-150
list
each
9.14
10.10
12.98
20.76
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
part
number
FSP-50
FSP-75
FSP-100
FSP-125
FSP-150
FSP-200
FSP-250
FSP-300
FSP-400
list
each
14.29
13.45
14.36
21.45
19.17
26.49
58.61
78.80
121.15
MALE SPUD
npt
size
1/2
3/4
1
1-1/4
1-1/2
2
part
number
MSP-50
MSP-75
MSP-100
MSP-125
MSP-150
MSP-200
list
each
9.14
15.40
19.71
26.64
27.35
37.45
hose
o.d. min.
1-17/32
2-1/16
2-3/32
2-1/4
2-1/2
2-3/4
3-3/32
3-1/2
3-13/16
4-1/16
DOUBLE SPUD
size
1/2
3/4
1
1-1/4
1-1/2
2
part
number
DSP-50
DSP-75
DSP-75
DSP-125
DSP-125
DSP-200
list
each
21.01
35.20
35.20
42.94
42.94
49.87
part
number
MST-50
MST-75
MST-100
MST-125
MST-150
MST-200
MST-250
MST-300
MST-400
list
each
6.14
10.97
16.54
17.34
20.12
30.44
53.63
64.62
113.13
hose
o.d. min.
4-1/4
4-7/8
5-1/8
We DO NOT RECOMMEND the use of imported ground joint
couplings and clamps for steam, critical, toxic, or combustible
fluids, nor in cyclic conditions involving temperature or
pressure. Imported ground joint couplings and clamps do not
meet NAHAD material guidelines for those applications.
We DO RECOMMEND Campbell Viton Seal Ground Joint
Couplings and Interlocking U-bolt Clamps (page 27) for use
HOSE CLAMPS
part
number
UHC-50
UHC-75
UHC-100
list
each
4.46
6.05
7.46
INTERLOCKING CLAMP (two-bolt)
hose
o.d. min.
15/16
1-3/16
1-5/16
1-1/2
hose
o.d. max.
1-1/16
1-5/16
1-1/2
1-11/16
list
each
13.01
19.99
22.26
25.11
28.42
38.34
58.01
65.65
79.37
103.41
hose
o.d. max.
4-13/16
5-5/16
6-3/16
part
number
LBU-39
LBU-49
LB-49
list
each
110.41
204.93
207.66
hose
o.d. min.
7/8
1-3/16
1-5/16
1-3/4
2-3/16
2-5/16
3-3/16
3-7/16
4
4-1/2
4-11/16
5-1/2
6-1/8
6-7/8
7-3/8
8-1/4
8-15/16
9-5/16
11-3/16
13-3/16
15-1/16
hose
o.d. max.
1-1/8
1-5/16
1-17/32
1-31/32
2-9/16
2-15/16
3-3/4
3-13/16
4-3/8
5-1/8
5-1/8
5-15/16
6-7/8
7-3/8
8
8-7/8
9-3/4
11-3/8
13
15
17-1/2
part
number
SL-29
SL-34
SL-40
SL-49
SL-60
SL-76
SL-94
400
463
525
550
600
675
769
818
875
988
1125
1275
1450
1700
list
each
3.08
3.29
4.42
6.11
6.58
7.27
12.91
15.07
15.07
21.16
21.16
22.22
25.05
30.97
48.56
43.48
46.60
94.37
107.39
177.41
216.27
SPIRAL CLAMPS
(right hand a.k.a. clockwise)
UNIVERSAL COUPLING CLAMP
hose
o.d. max.
1-1/8
1-5/16
1-13/16
part
number
LBU-14
LB-19
LBU-24
LB-24
LBU-29
LB-29
LBU-34
LB-34
LB-35
LB-39
DOUBLE BOLT CLAMPS
WARNING!
hose
o.d. min.
1
1-1/8
1-1/2
hose
o.d. max.
1-23/32
2-1/4
2-9/32
2-7/16
2-25/32
3-1/16
3-7/16
3-15/16
4-3/16
4-7/16
INTERLOCKING CLAMP (six-bolt)
MALE STEM
hose
size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
J
INTERLOCKING CLAMP (four-bolt)
part
number
LB-4
LBU-9
LB-9
LB-10
list
each
4.54
6.64
8.49
10.46
PLATED STEEL
hose
size
1-1/2
2
2-1/2
3
4
5
6
8
10
12
part
number
SC-150
SC-200
SC-250
SC-300
SC-400
SC-500
SC-600
SC-800
SC-1000
SC-1200
list
each
11.72
13.15
15.51
16.55
18.40
25.51
25.07
28.75
40.33
42.28
67
FEMALE TO MALE NIPPLE
BRASS FIRE HOSE
ACCESSORIES
npt x ght
thread
size
1 x 3/4
DOUBLE MALE HEX NIPPLE
npt x ght
thread
size
1 x 3/4
part
number
DMH1076
list
each
28.15
DMH1010
DMH1515
DMH2020
DMH2525
26.87
29.39
72.27
72.27
npt x nst
1x1
1-1/2 x 1-1/2
2 x 2-1/2
2-1/2 x 2-1/2
3 x 2-1/2
thread
size
1-1/2 x 3/4
2-1/2 x 3/4
part
number
HA1576
HA2576
list
each
50.27
43.42
HA2510
HA2515
HA2520
41.36
41.36
58.62
HA1515T
HA2575T
HA2510T
HA2515T
HA2520T
51.75
43.42
41.37
43.42
58.62
HA2515F
HA3025F
43.41
106.05
nst x npsh
2-1/2 x 1
2-1/2 x 1-1/2
2-1/2 x 2
nst x npt
1-1/2 x 1-1/2
2-1/2 x 3/4
2-1/2 x 1
2-1/2 x 1-1/2
2-1/2 x 2
nst x nst
2-1/2 x 1-1/2
3 x 2-1/2
npsh x nst
1-1/2 x 1-1/2
3 x 2-1/2
68
FM1515
FM2525
36.32
76.53
FM1515F
FM2525F
FM3025F
36.32
76.50
121.91
npt x nst
1-1/2 x 1-1/2
2-1/2 x 2-1/2
3 x 2-1/2
npsh x nst
1-1/2 x 1-1/2
2-1/2 x 2-1/2
FM15S15F
FM25S25F
36.32
76.50
1-1/2 x 1-1/2
2-1/2 x 2-1/2
2-1/2 x 2
2-1/2 x 1-1/2
2-1/2 x 3
FM15F15T
36.32
FM25F25T
80.14
FM25F20T
76.50
FM25F15T
86.72
FM25F30T 144.62
npsh x npt
DMH15F15F 29.39
FEMALE TO MALE HYDRANT ADAPTER
nst x ght
1-1/2 x 1-1/2
2-1/2 x 2-1/2
nst x npt
DMH1010F 26.87
DMH1515F 30.63
DMH2025F 80.40
DMH2525F 76.50
DMH3025F 125.81
nst x nst
1-1/2 x 1-1/2
list
each
27.58
npt x npsh
npt x npsh
1x1
1-1/2 x 1-1/2
2x2
2-1/2 x 2-1/2
part
number
FM1076
HA15S15F
47.58
HA30S25F 106.05
1-1/2 x 1-1/2
FM15S15T
36.32
part
number
FC150
FC150F
FC250
FC250F
list
each
29.74
29.74
51.78
51.78
part
number
BN6
BN7
BN10
BN12
BN15
BN15F
BN20
BN25
BN25F
list
each
27.16
27.16
33.18
66.44
61.61
61.61
101.96
120.98
120.98
CAPS WITH CHAIN
size
thread
1-1/2 npsh
1-1/2 nst
2-1/2 npsh
2-1/2 nst
BRASS NOZZLES
size
thread
3/4 ght
3/4 npsh
1 npsh
1-1/4 npsh
1-1/2 npsh
1-1/2 nst
2 npsh
2-1/2 npsh
2-1/2 nst
Our Guarantee of Quality
WARRANTY – Campbell Fittings, Inc. warrants the products described herein to be free from
defects in materials or workmanship for a period of one year from the date of shipment by Campbell
Fittings, Inc. under normal use and service. The obligation under this warranty is limited to replacing or repairing, without charge, any part supplied by Campbell Fittings, Inc. proven to have been
defective at time of shipment, and is expressly conditioned on the Purchaser’s giving Campbell
Fittings, Inc. immediate notice upon discovery of the defect. Campbell Fittings, Inc. shall have the
option of requiring the return of the defective material (transportation prepaid) to establish the claim.
This warranty shall not apply if the product has been altered or repaired by others, and Campbell
Fittings, Inc. shall make no allowance or credit for such repairs or alterations unless authorized in writing by Campbell Fittings, Inc.
The foregoing warranty is the only warranty applicable to the products described herein, and any previous agreements, representations or warranties, oral or written, are hereby cancelled. No other
expressed or implied warranties shall apply, including but not limited to implied warranties of merchantability and fitness for a particular use.
Under no circumstances will Campbell Fittings, Inc. assume any liability whatsoever for any consequential or contingent damages.
PRODUCT CHANGES – The right is reserved to make changes in pattern, design or material when
deemed necessary, without notice. Products which have become obsolete by reason of design
change or discontinued as a manufactured item may not be returned for credit.
RETURNED GOODS – Materials must not be returned unless consent has first been obtained in
writing from Campbell Fittings, Inc.
RESPONSIBILITY – We will not be responsible for delays resulting from strikes, accidents, negligence of carriers, or other causes beyond our control.
RISK – All goods are at the risk of the Purchaser after they have been delivered to the carrier and
receipt obtained for same (in good order).
ORDERS – Are subject to acceptance at Campbell Fittings, Inc., Boyertown, PA 19512.
SPECIAL PRODUCTS – Requests for cancellation of orders made to customer’s specifications
are not refundable and will not be considered if the manufacture of material is in process when the
request is made.
ERRORS, SHORTAGES, ETC. – Claims for errors, shortages, etc. must be made on receipt of goods,
otherwise no allowance will be made.
PRICES AND QUOTATIONS – All prices and quotations are subject to change without notice.
TAXES – Any tax that may be imposed by law on the sale of articles made or sold by this company shall be added to the sale price of such articles.
LIABILITY WARNING – Campbell Fittings, Inc. has no warranty applicable to fitness for
the purpose of a particular use of any of the products it sells or issues as samples and shall
not be responsible for any loss involving its products. It is entirely the responsibility of the
end user or installer to be sure that fittings, hose, and their applications are compatible.
69
Factory:
Campbell Fittings, Inc.
Box 417
Front & Washington Streets
Boyertown, PA 19512
Warehouse Locations:
Boyertown, PA
Midwest
Schaumburg, IL
Warehouse
Northeast
Boyertown, PA
Factory and
Warehouse
West
Ceres, CA
Warehouse
Atlanta, GA
Houston, TX
Schaumburg, IL
Ceres, CA
U.S. and Canada:
phone 1.800.367.3678
fax 1.800.367.3670
email [email protected]
website campbellfittings.com
International:
phone 1.610.367.6916
fax 1.610.367.0689
email [email protected]
Southwest
Houston, TX
Warehouse
Southeast
Atlanta, GA
Warehouse

JUL Y 2 0 13 - Campbell Fittings

Transcription

Similar documents

Die BUCHSTAVIER - Das Dosierte Leben

why procore? the truth why how

Rheem Prestige Series™ Heat Pumps equipped with the Comfort