DRUCKLUFTTECHNIK OTTO NEMEC

DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
Catalogue
Spare parts illustrated in catalogue can be ordered through e-Mail adress [email protected] and
with former price offer.
By ordering a filling ramps, compressors and HP reservoirs the firma DON reserve yourself a
delivery period up to 28 calender days.
Installing and putting the facility into operation is ussualy icluded in delivery, but it will be
a part of writting contract.
Delivery period for all others parts is 10 working days.
The physical functionality of planned facilities we can present them (not binding) by visiting
our work-room after former agreement.
Used shortcut:
EL
GK
KK
LP
HP
PL
TPA
IG
AG
Electronics
Large conic
Short conic
Low press
High press
Pressed air
Technical pressure revision
Internal thread
External thread
-1-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 01- 01
Valve RGS GK
Input: G ¾ ´´ AG
Output: G 5/8 ´´ IG
DIN 200 / 300 bar
D- 01- 02
Valve RGS KK
Output: G 5/8 ´ IG
DIN 200 / 300 bar
D- 01- 03
Protection valve Input:
without / with sinter filter
A
D- 01- 04
Valve RGS
Input: M18 x 1,5
Output: G 5/8 ´´
DIN 200 / 300 bar
B
AG
IG
-2-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 01- 05
Valve for composit tank 6,8 L
Input: M18 x 1,5
AG
Output: G 5/8 ´´
IG
DIN 300 bar
D- 01- 06
Round Valve for 50 L PL tank
Input: G ¾ ´´ AG
Output: G ¼ ´´ IG
DIN 350 bar
D- 01- 07
Round filling valve for panel
Input: G ¼ ´´
IG
Output: G ¼ ´´
IG
Mounting:
M32 x 1,5 AG
-3-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 01- 08
Filling valve for hose Input:, with deaerating
(without gauge)
D- 01- 09
Flip filling valve with deaerating
DIN 200 / 300 bar
D- 01- 10
Ball valve - rustless – 2 way
Mounting hole Ø 20,4, Ø 6 / 8 mm tube
D- 01- 11
Ball valve - rustless – 3 way
Mounting hole Ø 20,4
Ø 6 / 8 mm tube
-4-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 01- 12
Deaerat valve - swiveling
Mounting hole Ø 20,4
Input: M14 x 1,5 IG
Output: hose Ø6 mm (inside thread)
D- 01- 13
Seat for deaerat valve
D- 01- 14
Repair set for filling valve
(belong to D0-1-06)
D- 01- 15
Repair set for Flip filling valve
-5-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 01- 16
Wrench for repair set of Flip filling valve
D- 01- 17
Sealing screw for Valve
A,B
D- 01- 18
A
Round filling valve for panell without deaerating
B
Round filling valve for panell with deaerating
C
RGS Valve GK / KK
„O“ rings (various dimensions)
(after writted request)
-6-
C
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 02- 01
Filling tube for the filling ramp
Input:
M16 x 1,5
Output:
DIN 200 bar
D- 02- 02
Filling tube for the filling ramp
Input:
M16 x 1,5
Output:
DIN 300 bar
D- 02- 03
Filling tube
Input:
Output:
M16 x 1,5 – 60° for hose
DIN 200 bar
D- 02- 04
Filling tube with Flow-Stop
Input:
M16 x 1,5 – 60° for hose
Output:
DIN 200 bar
D- 02- 05
Filling tube short with Flow-Stop
Input:
M16 x 1,5 – 60° for hose
Output:
DIN 200 bar
-7-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 02- 06
Filling tube with Flow-Stop
Input:
M16 x 1,5 – 60° for hose
Output:
DIN 300 bar
-8-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 03- 01
Metal hand-ring for sealing Ø 50
DIN 300 bar
D- 03- 02
Metal hand-ring Ø 42
DIN 300 bar
D- 03- 03
Metal hand-ring Ø 42
DIN 200 bar
D- 03- 04
Metal hand-ring Ø 50
DIN 200 bar
-9-
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 03- 05
Rubber- metal hand-ring Ø 42
DIN 200 bar
D- 03- 06
Metal hand-ring Ø 75
DIN 300 bar, AG 5/8“
- 10 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 04- 01
Backlash valve
Input:
Output:
A
EO Ø6S
G ¼ ´´ IG
A
D- 04- 02
Reduction
Input: G ¼ ´´ AG
Output: G 5/8 ´´ IG, DIN 200 bar
D- 04- 03
Reduction
Input: G ¼ ´´ AG
Output: G 5/8 ´´ IG, DIN 300 bar
B
EO Ø8S
G ¼ ´´ IG
B
- 11 -
C
G ¼ ´´ IG
G ¼ ´´ IG
C
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 04- 04
Reduction for hose inlet
Input: M16 x 1,5 AG
Output: G 5/8 ´´
IG, DIN 200 bar
D- 04- 05
Reduction for hose inlet
Input: M16 x 1,5 AG
Output: G 5/8 ´´
IG, DIN 300 bar
D- 04- 06
Reduction
Input: G ¼ ´´ AG
1. Output:
G 5/8 ´´ IG, DIN 300 bar
2. Output:
SV 225
D- 04- 07
Adapter
Input: G ¾ ´´ IG
Output: G 5/8 ´´ IG
- 12 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 04- 08
Adapter
Input: G ¾ ´´ AG
Output: M22 x 1,5 AG
D- 04- 09
Oxygen adapter for Nitrox
Input: G 5/8 ´´ IG
Output: G 5/8 ´´ IG
DIN 200 bar
D- 04- 10
Cover cap
G 5/8 ´´ IG, without chain
D- 04- 11
Cover cap anchoring
- 13 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 04- 12
Cover cap for oxygen
G ¾ ´´, without chain
D- 04- 13
Connection 90° DIN 300 bar
Input: G 5/8 ´´ IG
Output: G 5/8 ´´ AG
DIN 300 bar
D- 04- 14
Double connection
Input: 2 x G 5/8 ´´ IG
Output:
1 x G 5/8 ´´ AG
DIN 200 bar
D- 04- 15
Double connection for oxygen
Input: 2 x G ¾ ´´ AG
Output:
1 x G ¾ ´´ IG
DIN 200 bar
- 14 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 04- 16
Adapter
Input: M22 x 1,5 AG
Output:
G 5/8 ´´ IG
DIN 200 bar
D- 04- 17
Adapter
Input: M22 x 1,5 AG
Output: G 5/8 ´´ IG
DIN 300 bar
- 15 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 05- 01
HP Press reducer– steepless, adjustable
DIN 0 – 350 bar
D- 05- 02
Fixing ring for HP Press reducer (D-05-01)
D- 05- 03
HP Press reducer – fix adjusted
Adjust range up to 300 bar
D- 05- 04
LP Press reducer 0 – 16 bar
Input: 5/8 ´´ , 200 bar
Otput: ¼ ´´
- 16 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 05- 05
LP Press reducer 0 – 20 bar
Input: G 5/8 ´´ AG
Output: Quick coupling
D- 05- 05
Safety valve without ( TÜV )
PN 225 / 350 bar, DN 5
D- 05- 06
Safety valve holder
A
- 17 -
B
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
( without TÜV )
D- 05- 07
Safety valve
PN 225 bar
D- 05- 08
Pneumatic swivel
with 2 way valve
- 18 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 06- 01
Check gauge with deaerating
Input: G 5/8 ´´
D- 06- 02
Check gauge for oxygen with deaerating
Input: G 3/4 ´´
DIN 400 bar
- 19 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 06- 03
Check gauge Ø 100
Inlet: in the rear
DIN 400 bar, with glycerine
D- 06- 04
Check gauge Ø 63
Inlet: in the rear
DIN 400 bar, with glycerine
D- 06- 05
Check gauge Ø 100
Inlet: in the rear
DIN 16 bar, with glycerine
- 20 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 06- 06
Check gauge Ø 63
Inlet: below
DIN 100 bar, with glycerine
D- 06- 07
Check gauge Ø 63
Inlet: below
DIN 100 bar
D- 06- 08
Check gauge Ø 100
Inlet: below
DIN 400 bar, with glycerine
D- 06- 09
Rubber cap for Check gauge Ø 63
- 21 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 07- 01
Press switch
30 – 500 bar, 240V / 1,5 A
D- 07- 02
Timer
0,05 Sec – 300 Hr.
24V, 42 – 48 V, 110 – 240 V
- 22 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 07- 03
Magnetic valve
330 bar, 220V / 50 Hz, 7,7 W
D- 07- 04
Magnetic valve
230V / 50 Hz
D- 07- 05
Condense automatic
D- 07- 06
Piston for magentic valves
for D-07-04
- 23 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 07- 07
Collecting strip for condensate
2 – way
D- 07- 08
Deaerating Valve with check gauge 400 bar
Without armature screw
D- 07- 09
Air filter Ø 65 x 70 – N 260 (Bauer, Poseidon, Coltri, Nemec )
D- 07- 10
Air filter Ø 160 x 76
N500
- 24 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 07- 11
Noise silencer
Input: ½´´
IG
D- 07- 12
Silencer for oil separator
Input: 5/8´´
D- 07- 13
Oil level gauge, 1 Block
D- 07- 14
Oil level gauge, 2 Blocks
- 25 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 07- 15
Kompressor oil
1 L. Mineral
D- 07- 16
Silicone vaseline 200 Gr.
D- 07- 17
Silentblock Ø 50 x 50
D- 07- 18
Rubber foot
- 26 -
1 L. Synthetic
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 07- 19
Suck hosepipe
Ø 30 mm (inner)
D- 07- 19
Digital wet measurement
D- 08- 01
Filter cartridge D 45-200
length: 200 mm, rechargeable
D- 08- 02
Filter cartridge D 45-380
length: 380 mm, rechargeable
- 27 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 08- 03
Filter cartridge D 70-500
length: 500 mm, rechargeable
D- 08- 04
Filter cartridge D 70-500 EL
length: 500 mm, rechargeable
D- 08- 05
Filter cartridge D 70-700
length: 700 mm, rechargeable
D- 08- 06
Filter cartridge D 70-700 EL
length: 700 mm, rechargeable
D- 08- 07
Oil separator N 280-A
length: 280 mm
with / without TÜV
- 28 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 08- 08
Filter corpus complete N 620 F
length: 500 mm, 300 bar, volume 2,1 L.
with / without TÜV
N
D- 08- 09
EL
Filter corpus complete N 835 F
length: 700 mm, 300 bar, volume 2,85 L.
with / without TÜV
- 29 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
N
EL
D- 08- 10
Head of filter cartridge for D 70 EL
D- 08- 11
Head of filter cartridge for D 70
D- 08- 12
Filter spring for D 45
- 30 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 08- 13
Filter spring for D 70
D- 08- 14
Filter separator plate for D 45
D- 08- 15
Filter separator plate for D 70
D- 08- 16
Filter separator felt for D 70
Ø 67 mm
D- 08- 17
Filter separator foamy material for D 70 EL
Ø 67 mm
D- 08- 18
Filter separator felt for D 70 EL
Ø 63 mm
- 31 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 08- 18
Filter separator felt for D 45
Ø 42 mm
D- 08- 19
Steel bracket for filter D 70
D- 08- 20
Plate for filter D 70
D- 08- 21
Molecular sieve
1 – 1,5 mm
- 32 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 08- 22
Active charcoal
D- 08- 23
Transmitting hose for air
Input: 5/8´´ IG
Output: 5/8´´ AG
D- 08- 24
Transmitting hose for air without tightening screw 200 / 300 bar
Input: M16 x 1,5 IG
Output: M16 x 1,5 IG
D- 08- 25
Steel bracket for 50 L. reservoirs tanks,
complete
200 / 300 bar
- 33 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 10- 01
Fill ramp to build in
2x 300 bar, 2x 200 bar
D- 10- 02
Extern fill ramp
2x 300 bar, 4x 200 bar
D- 10- 03
Compressor N 260 Booster
- 34 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
E – Motor, 380 V, 50 Hz, 5,5 Kw
condensing automatic,
air output: 260 – 1200 l / min, ...
D- 10- 04
Compressor N 260 Booster - silenced
E – Motor, 380 V, 50 Hz, 5,5 kW
air output: 260 – 1200 l / min,
condensing automatic with timer and also after turn off , ...
- 35 -
DON-Drucklufttechnik s.r.o.
Tel.: +421 2 5479 3123, Handy: +421 905 488 740
e-Mail: [email protected]
D- 10- 05
Reservoirs steel tanks
N SS 100
2 x 50 L/ 360 bar
N SS 200
4 x 50 L/ 360 bar
- 36 -