Towing Hitch Application Guide

Transcription

REESE TOWPOWER
71
APPLICATIONS GUIDE INSTRUCTIONS
2
1
Towing
Hitch Application
Guide
5
4
6
7
2
1
1 Vehicle Model/Style & Years
Applications are listed alphabetically by
make, followed by model and year.
2
2
3
4
5
3
6
4
8
5
6
3
4
5
6
9
3
7
7
7
2
8
4
5
6
8
10
11
7
2 Hitch Style
Indicates Square Tube (n) design
or Round Tube (l) design.
3 Hitch Number
4 Hitch Footnotes
Footnotes reference additional information
pertinent to the installation of each hitch.
See right side of each application spread
for explanations of each abbreviation.
5 Wrenches
Listing of each size wrench needed for
hitch installation.
6 Drill Bits
On hitches that require drilling, we list
the sizes needed. "NO DRILL" is listed for
hitches that do not require drilling.
7 Installation Time
Times are based on common mechanical
practices and should be used as an estimate as actual installation times may vary.
8 Receiver Weight Ratings
Weight Carrying refers to the total load
the hitch is capable of pulling. Weight
Distributing is the total load capacity of the
hitch when a weight distribution system
is properly used. Numbers listed are in
thousands (ie. 5 = 5,000 lb).
9 T-Connector
Reese Towpower® T-connectors require no splicing of wires. Simply unplug your vehicle's wiring
harness connector and insert the T-connector. No
special tools required.
10Standard Wire
Applies to bare wires that can be spliced into the
vehicles wiring system by using an electrical connection device. Use the appropriate size electrical
butt style connector for best results.
11Electrical Footnotes
Footnotes reference additional information pertinent to
the installation of T-connector
or Standard Wiring. See
right side of each application
spread for explanation of
each abbreviation.
APPLICATIONS GUIDE
2012
3
REESE TOWPOWER
FootNOTE ABBREVIATIONS
ø No drilling required - use existing holes.
n Square Tube hitch design.
l Round Tube hitch design.
@ Ultra Frame ball mount must be used to achieve maximum
weight carrying rating.
† Available while supply lasts.
A
2 wire system. No Converter required, but a ModuLite® can
be used.
AA Requires temporary removal of bumper during installation.
AB Requires four (4) 3/8” spacer blocks (#01077-011) for installation
(sold separately).
AC Hitch rated at 1000 lbs. GTW, 100 lbs. TW.
AF Hitch is ONLY rated for weight carrying at 3500 lbs. GTW, 350 lbs. TW
and DO NOT use w/weight distribution spring bars for this specific vehicle,
except for long bed trucks.
AG Drawbar Kit & Accessory Adapter sold separately.
AI Additional installation time required.
AL Additional installation time required for vehicles equipped with load leveling
compressor.
AM Not recommended on Trofeó models prior to 1989. 1989 units require minor
fascia trim and exhaust repositioning.
AO Will not fit vehicles with twin tailpipes.
AW Will not fit turbo models.
AY Does fit SE models with Sport Appearance Package, GT model or 4 Dr. STE.
B 3 wire system. Requires Converter, but a ModuLite® can be used.
BC Hitch rated at 1,500 lbs. GTW, 100 lbs. TW
BF Requires standard bumper. Will not fit with step bumper.
BN Exterior mounted plug on some or all models. May require an aftermarket
electrical mounting box or bracket. (Sold separately)
C 2 or 3 wire system, determine at install.
CA Models with dual exhaust require exhaust modification.
CC Requires minimum of 19” from end of frame rail to spring shackle bracket.
CE T-connector includes fuse(s) & relays(s), converter not required.
Standard 2 wire system at factory tow plug.
CG T-One incorporates circuit protected taillight converter.
CH T-One is equipped with circuit protected ModuLite® module.
CK Drawbar installs though fascia on SC models. Obtain customer approval.
CM OEM Style Attachments/Requires Factory Bumper For Hitch Installation.
CN Requires OEM factory bumper for hitch installation.
CO Will not fit 8 ft. 2500/3500 Series with HD suspension or four door Crew Cab.
CP Fits All Models without Factory Installed Receiver.
CQ Will not fit with heavy duty suspension.
CS Will fit with full-size spare tire stowed under vehicle.
CT Will not fit long bed models after 1999.
CV Will not fit short wheel base with dual exhaust.
D See auto dealer for trailer tow wiring kit.
DA Will not fit with tube style bumper.
DB Will not fit 6 ft. bed pickups.
DG 71-77 (Standard) Van: will not fit with optional large gas tank.
74-77 (Maxi) Van: includes models with optional large gas tank.
DH Cannot be installed on 1987 and later vehicles with factory step bumper
unless step bumper and its mounting brackets are permanently removed and standard factory bumper is installed.
DS Use #33072 on 1500 models built after 11/1/02. Use #37084
on 1500 models built before 11/1/02.
DU Fascia removal required.
DV Will not fit short wheel base models.
DY Use on 1500 models built after 11/1/02.
DX Requires six 3/8” spacer blocks (#01077-011 and six 1/2-13 x 2-1/4
GRS carriage bolts (#01266-009), which are not provided (sold separately).
E ModuLite® required.
EB Factory electrical bracket will NOT fit with this hitch. Must use aftermarket
electrical box or bracket.
EF Fits all models with standard bumpers.
EG Relocation of spare tire bracket is not required.
NOTE: 19mm open end style wrench must be purchased to allow removal of spare tire after hitch installation.
EK Extended cab only.
EO Requires longer ball mount.
EP Fascia trimming required.
F ModuLite® recommended.
FB Will not fit vehicles fitted with optional 31” tires stowed under vehicle
FE Fascia trimming required. Allow additional installation time.
FM On vehicles equipped with load leveling device, air pump mounting
modification required.
FP Spare tire repositioning and/or modification of spare tire carrier
may be required.
FS Includes 2 & 4 WD models with heavy duty suspension.
FT Models with 16" spare tire must be relocated.
G Low-side switching system.
GC T-One is equipped with ModuLite® Lite module.
GH Will not fit models with 34” wide frames.
GO Requires hitch with packaging date code 2/15/94 or later.
GW Spare tire cannot be stowed under vehicle on short wheelbase models
equipped with 15” tires or full-size spare.
GX Requires fabrication of “L” bracket to reposition exhaust on ‘95
`and later 6 ft. box models.
GP Hitch crosstube concealed behind bumper.
GU Will not fit vehicles with factory or after market lower Fascia/Rollpan
or Tube Bumper.
H 3 wire system with OEM standard 2 wire harness.
HA External dress panel beneath 95-97 and 03-05 vehicles must be removed
for hitch installation.
HB Slight fascia deformation may occur on some models.
HC Will not fit with mini or full size tire stowed under vehicle.
HD Will not fit 6 ft. bed pickups except 6 ft. Super Cab.
HG T-One incorporates taillight converter.
HJ Per Dodge owner's manual: If trailer is equipped with more than standard
lighting (1 taillight per side), use of ModuLite® or dealer supplied harness is required.
HM Hitch crosstube is visible beneath bumper.
HP Requires four (4) 7/16” x 1” x 2” spacer blocks (#01080-012) for installation.
(Sold separately)
HX Minor exhaust modification may be required.
HY Ultra Frame ball mount DT #4283/HH #80125 cannot be used in rise position
on vehicles with step bumpers.
J Under vehicle spare tire stowage is retained.
JF Will not fit with 16" spare tire.
JL Installation requires OEM bumper & brackets.
JM Some early production 1994 models may require #74667.
JR Exhaust must be temporarily lowered for installation.
JT 2WD models only.
JV Rubber air deflector/fascia must be removed or trimmed to install hitch.
K Adapter kit (#1685) required with #37081 for 1980 and later F-series pickups.
KA Gasoline engine models only.
KH Minor heat shield modification may be required.
KK When installing on a vehicle originally equipped with an OEM hitch, OEM bumper brackets must be purchased and installed prior to new hitch installation.
KL Hitch is designed to attach beneath the OEM hitch.
LA Optional Wider 1200mm Length Cross Bar.
LB Optional Wider 1300mm Length Cross Bar.
LS T-One incorporates low-side switching taillight converter.
Additional installation time required.
LT Requires removal of factory hitch if equipped.
M Will fit with heavy-duty suspension.
MB Will not fit models equipped with air suspension package.
MX Multiplexed wiring system.
N DO NOT cut or splice vehicle wiring. Only use approved T-One or see auto
dealer for trailer tow wiring kit.
O Will not fit vehicles equipped with dual exhaust existing below the bumper.
P For 124” wheelbase and E350 models, adapter kit (2626) is required
(sold separately).
PA Will not fit 124" wheelbase or E-350 models.
QS Hitch rated at 2500 lb GTW, 200 lb TW.
RA Do not install on 1996 models equipped with M10 fasteners.
RB Hitch installation can be made easier with a “cutter” type drill bit.
RD For vehicles equipped with factory tow package, may require additional
components or may be used as a replacement harness.
RH Optional 06280 draw bar required (sold separately), except for models
with ZR2 & Highrider package.
RI Cutting of rollpan in license plate area required for receiver tube access.
Obtain customer approval first.
RK Fits vehicles with factory and some aftermarket rollpans.
RL Short box models require relocation of spare tire.
Look For Our
Exclusive
UPRATED Hitch
Designs With
Increased
Tongue Weight.
RN Aftermarket spare tire repositioner may be used on 8 ft. bed models to ease
installation of larger spare tires.
RO Will not fit Silverado SS.
RW On some models it may require an upgraded flasher or Power Module.
SA Requires drilling on 6 ft. bed models.
SB Will not fit models with short bed.
SC Minor trimming of plastic trunk pan required.
SD Hitches produced before 07/21/06 are rated
at 350/3500 WC.
SG Hitches produced before 09/10/07 are rated
at 1000/10000 WC & 1200/12000 WD.
SH Hitches produced before 09/27/07 are rated
at 1200/12,000 WC & 1400/14,000 WD.
SI Hitches produced before 07/31/07 are rated
at 350/3500 WC & 500/5000 WD.
SN Hitches produced before 04/28/08 are rated
at 1000/10000 WC & 1200/12000 WD.
SP Hitches produced before 04/27/08 are rated
at 1200/12,000 WC & 1400/14,000 WD.
SS Hitches produced before 03/31/08 are rated
at 1000/10,000 WC & 1200/12,000 WD.
ST Will not fit 2WD models with short bed.
SU Hitches produced before 03/11/08 are rated
at 1000/10000 WC & 1200/12000 WD.
SV Trimming or removal of under body appearance panel required.
T Vans with step bumpers require longer ball mounts.
TA Trunk access required for hitch installation.
TS Hitch without electrical bracket rated at 350/3500 WC & no WD.
Hitch with electrical bracket rated at 350/3500 WC and 500/5000 WD.
TF For 3/4 and 1 ton vehicles only.
TH Will not fit models with skid shield.
UD Fascia removal required on XR & XRS models.
V For vehicles with factory installed step bumpers only.
VB Will not fit vehicles with vibration damper installed at rear of frame on drivers
side.
X Minor fascia trimming required.
73
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
ABBREVIATIONS
ABBREVIATIONS
72
REESE TOWPOWER
9/16”, 11/16”
7/16”
n 77073 †,X
n 77165 Ø,JR
9/16”, 11/16”
n 77165 Ø,JR
3/4”
3/4”
n 77247 Ø,HM,JR
n 77063 Ø,HM
10mm, 3/4”, 7/8” NO DRILL 30
9/16”, 3/4”
1/2”
40
n 77063 HM
9/16”, 3/4”
1/2”
00-06
X5
07-12
BUICK
Allure Canada Only
05-09
3/4”, 7/8”
1/2”
– 77131
n 77208
n 77144
n 77208
n 77226
10mm, 3/4”
Ø,HM,JR,KH 10mm, 11/16”
Ø,HM,JR
10mm, 11/16”
Ø,HM,JR,KH 10mm, 11/16”
1/2”
1/2”
14, 17mm, 7/8”
1/2”
17mm
Ø,EP,GP
3/4”
Ø,HM,JR
13mm, 3/4”
NO DRILL 25
NO DRILL 25
Ø,HM,JR
13mm, 3/4”
NO DRILL 25
8, 10, 18mm, 3/4” NO DRILL 45
8, 10, 18mm, 3/4” NO DRILL 45
78-81
89-96
97-05 n 77109
NO DRILL 15
n 44589 Ø,CS,GP,JR 10, 14, 17,
19mm
l 44562 Ø,†,JR
10, 17mm
14, 17, 19mm
NO DRILL 30
7.5 45
19mm, 3/4”
n 33043 –
14, 17, 19mm 1/2”
n 06003 –
n 06003 –
n 06615 AO,GP
n 06073 –
1/2”
20 n 06367
GP,JR
n 06407 –
n 06200 JR
1/2”
30 n 06384
n 51183
n 06407
n 06054
n 88002
n 06407
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
FOOTNOTES
HG
HG
HG
HG
–
HG
HG
HG
CH
CH
CH
–
BN,HG
HG
–
HG
HG
CH
–
–
–
1/2”,
11/16”
6
6
60
–
78104
–
NO DRILL 6
6
75
–
78104
–
30
30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
7, 13, 15mm, 11/16” 1/2”
40
3/4”, 9/16”
1/2”
40
10, 13, 15mm, 9/16” 1/2”
40
–
78104
–
–
–
–
–
–
78104
78104
78104
78104
78058
–
30
–
–
–
78013
78013
78058
–
–
–
78104
78104
–
–
78058
–
3/4”, 7/8”
1/2”
3/4”, 7/8”
1/2”
9/16”, 11/16”, 7/8” 3/8”
13mm
GP,JR
3/4”, 7/8”
–
HG
100
3/4”, 7/8”
Ø,AI,FM
HG
3.5 4
GP,JR
–
NO DRILL 4.5 –
HG
1/2”
8, 13, 17mm, 1/2”,
T-50, T-55, 11/16”
3/4”
6
6 60
n 44178 AA,EP
EP,GP
n 06384 GP,JR
n 51183 GP,JR
13mm, 3/4”,
7/8”, T-20
WRENCHES
–
5
n 44646 Ø,GP
FOOTNOTES
78104
78104
78104
78104
78104
NO DRILL 4
35
5 35
– 30
– 30
HITCH
NUMBER
78104
78104
78104
78104
–
30
–
–
–
–
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
CH
NO DRILL 3.5 5
10, 17, 19mm NO DRILL 4
19mm, 3/4” NO DRILL 4
n 44590 Ø,AA,
7/8”
78104
78104
78104
78104
–
78104
78104
78104
78104
78104
78104
30
–
–
–
–
–
–
n 51093 AA,EP
TA
NO DRILL 3.5 5
l 44594 Ø,CR,JR
n 44584 Ø,GP
n 44531 AA,EP
10, 13, 15mm,
9/16”
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
30
l 44654 Ø,HM
n 77231 Ø,GP,SV
n 77231 Ø,GP,SV
Century Sedan
Century Sedan
Century Sedan
19mm, 3/4”
NO DRILL 3.5 5
NO DRILL 45
NO DRILL 25
Ø,GP,I
JR
74701
74701
85721
85721
–
74661
85704
–
78002
78002
85723
30
30
35
8, 10, 18mm, 3/4” NO DRILL 45
8, 10, 18mm, 3/4” NO DRILL 45
1977
78-85
86-89
90-91
92-99 n 77070
–
NO DRILL 45
NO DRILL 40
n 77231 Ø,GP,SV
n 77231 Ø,GP,SV
Centurion RWD
Centurion RWD
Centurion FWD
Centurion FWD
Centurion FWD
78104
78104
78104
78104
78104
78104
78104
78104
78104
–
78104
78104
78104
30
n 06130 Ø
TA
–
–
74660
74660
74660
74660
74660
74660
74660
–
74660
74660
74660
40
n 06465 Ø,GP
TA
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
HITCH
NUMBER
WRENCHES
14, 17mm, 7/8”
n 51159 Ø,CS,GP,JR 10, 14, 17,
19mm
– 77033
1250 lb TW 12000 lb GTW
20
7/16”
20
7/16”
20
NO DRILL 15
NO DRILL 15
n 06996 –
n 06996 –
X5
78-81
9/16”, 11/16”
500-750 lb TW 5000-7000 lb GTW
500 lb TW 5000 lb GTW
WIRING
STANDARD WIRE
n 77073 †,X
n 77073 †,X
2007
08-11
2007
08-11
04-10
Century Wagon RWD
INSTALL TIME
STYLE
NO DRILL 15
NO DRILL 15
BMW
328i Sedan
328i Sedan
328xi Sedan
328xi Sedan
X3
78-81
84-96
DRILL BITS
9/16”, 7/8”
09-12 n 77203
05-12 n 77210
06-12 n 77210
09-12
Century Estate Wagon RWD
Century Estate Wagon FWD
WRENCHES
9/16”, 7/8”
RDX, All styles
RDX, except models w/ full-size spare tire
NX
NX
RSX
SLX, All styles
TL
TL, All styles
TSX
TSX, All styles
ZDX
AUDI
A4 4 Dr. Sedan, Inc. Quattro
A6 4 Dr. Sedan, Inc. Quattro
A6 Avant Wagon, Inc. Quattro
Q5
07-12
07-12
07-09
10-12
02-06
96-99
04-08
09-12
06-08
09-12
10-12
FOOTNOTES
HITCH
NUMBER
n 77025 Ø
n 77025 Ø
CLASS V
T-CONNECTOR
97-00
2001
1997
98-99
97-99
01-03
99-03
96-01
02-04
06-11
94-01
94-01
01-06
STYLE
YEAR
MODEL
ACURA
1.6 EL, Canada Only
1.7 EL, Canada Only
2.2 CL
2.3 CL
3.0 CL
3.2 CL
3.2 TL
3.5 RL
3.5 RL
CSX Canada Only
Integra 2 Dr.
Integra 4 Dr.
MDX
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
NO DRILL 40
1/2”
30
30
9/16”, 11/16”, 7/8” 3/8”
30
13mm, 7/8”
NO DRILL 40
See Instructions
45
9/16”, 11/16”, 7/8” 3/8”
30
8, 10mm,
11/16”, T-20
8, 13, 17mm,
T-50, T-55,
3/4”
8, 18mm
deep socket
–
–
–
–
–
–
–
–
–
–
1/2”
Observe all safety precautions when working beneath a vehicle and eye wear protection.
–
ABBREVIATIONS
@ Ultra Frame ball mount must be used to achieve maximum weight carrying rating.
A 2 wire system. No Converter required, but a ModuLite® can be used.
AC Hitch rated at 1,000 lbs. GTW, 100 lbs. TW.
AL Additional installation time required for vehicles equipped with load leveling compressor.
AMNot recommended on Trofeó models prior to 1989. 1989 units require minor
EG Relocation of spare tire bracket is not required. NOTE: 19mm open end style
wrench must be purchased to allow removal of spare tire after hitch installation.
FMOn vehicles equipped with load leveling device, air pump mounting modification required.
FP Spare tire repositioning and/or modification of spare tire carrier may be required.
GU Will not fit vehicles with factory or aftermarket lower Fascia/Rollpan or Tube Bumper.
HJ Per Dodge owner's manual: If trailer is equipped with more than standard lighting
(1 taillight per side), use of ModuLite® or dealer supplied harness is required.
JL Installation requires OEM bumper and brackets.
JT 2WD models only.
KK When installing on a vehicle originally equipped with an OEM hitch, OEM
bumper brackets must be purchased and installed prior to new hitch installation.
LS T-One incorporates low-side switching taillight converter. Additional installation time required.
N DO NOT cut or splice vehicle wiring. Only use approved T-One or see auto dealer
for trailer tow wiring kit.
RI Cutting of rollpan in license plate area required for receiver tube access. Obtain
customer approval first.
SD Hitches produced before 07/21/06 are rated at 350/3500 WC.
SH Hitches produced before 09/27/07 are rated at 1200/12,000 WC & 1400/14,000 WD.
SI Hitches produced before 07/31/07 are rated at 350/3500 WC & 500/5000 WD.
SP Hitches produced before 04/27/08 are rated at 1200/12,000 WC & 1400/14,000 WD.
SS Hitches produced before 03/31/08 are rated at 1000/10,000 WC & 1200/12,000 WD.
VB Will not fit vehicles with vibration damper installed at rear of frame on drivers side.
75
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - BUICK
ACURA
ACURA MODEL
- BUICK
74
REESE TOWPOWER
REESE TOWPOWER
Electra RWD
Electra FWD
Electra FWD
Electra FWD
Electra Park Ave. RWD
Electra Park Ave. RWD
Electra Park Ave. FWD
Electra Park Ave. FWD
n 88002
n 06003 –
78-84
85-90
86-89
n 88002
n 06615 AO,GP
90-91
1977
78-84
86-89
1990
13mm, 7/8”
n 06993 Ø,HM
Le Sabre RWD
Le Sabre RWD
1977
78-83
n 06003
n 06003
84-85
n 88002
n 06003
86-95
n 88002
n 88001
See Instructions
86-87
n 88002
n 06409 –
See Instructions
88-89
n 88002
n 06615 AO,GP
90-91
JR
10, 13, 15mm,
9/16”
1/2”
JR
10, 13, 15mm,
9/16”
1/2”
9/16”
13mm, 3/4”, 7/8”,
9/16”
13mm, 3/4”, 7/8”,
9/16”
13mm, 3/4”, 7/8”,
9/16”
9/16”, 5/8”, 11/16”
7, 13, 15mm,
11/16”
See Instructions
n 88002
n 06615 AO,GP
See Instructions
n 51173
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
CH
NO DRILL 20
85719 78104
CH
3/8”, 1/2” 30
–
–
78104
78104
–
–
78104
–
–
78104
–
–
78104
–
–
78104
–
–
78058
–
45
45
30
40
–
78058
–
1/2”
35
–
78104
–
1/2”
30
1/2”
30
1/2”
30
–
78104
–
1/2”
30
1/2”
1/2”
7, 13, 15mm, 11/16” 1/2”
10, 13, 15mm, 9/16” 1/2”
7, 13, 15mm, 11/16” 1/2”
GP,JR
10, 13, 15mm, 9/16” 1/2”
n 51173 HM,JR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
85719 78104
AO,GP
n 06976 HM,JR
DRILL BITS
NO DRILL 20
See Instructions
HM,JR
WRENCHES
CH
See Instructions
n 06976 HM,JR
FOOTNOTES
85719 78104
See Instructions
13, 15mm, 9/16”,
3/4”, 7/8”
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
HITCH
NUMBER
NO DRILL 20
See Instructions
n 06285 GP,JR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
CH
See Instructions
3/4”, 9/16”
n 06615
20 n 06367
DRILL BITS
85719 78104
30
3/4”, 7/8”
1/2”
30
3/4”, 7/8”
1/2”
30
13mm, 3/4”, 7/8”, NO DRILL 20
See Instructions
n 88001
n 88002
WRENCHES
BN
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
See Instructions
45
GP,JR
FOOTNOTES
78058
78058
–
78058
See Instructions
n 06073 –
n 88001
20 n 06367
HITCH
NUMBER
78066
74682
–
78111
45
40
40
45
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
See Instructions
45
n 88001
n 88002
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
–
40
l 51083 Ø,GP,JR,RT 18mm, 3/4” NO DRILL 5
10-12
02-05
78104
–
1/2”
See Instructions
La Crosse CXS
Le Sabre All Models
–
–
3/4”, 9/16”
n 06993 Ø,HM
00-01
–
1/2”
7, 13, 15mm, 11/16” 1/2”
10-12
Le Sabre All Models
–
78104
78104
n 06073 –
n 88002
La Crosse CXL, FWD
97-99 n 77070
–
–
–
40
See Instructions
n 06993 HM
Le Sabre FWD
–
n 88002
n 06615 AO,GP
10-12
92-96 n 77070
78104
78104
78104
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
La Crosse CXL, AWD
Le Sabre FWD
–
–
–
n 06003 –
n 06003 –
10-12
Le Sabre FWD
–
See Instructions
La Crosse CX
Le Sabre FWD
78058
78104
n 06073
n 06073 –
n 51183 GP,JR
n 06993 Ø, HM
Le Sabre FWD
–
–
7, 13, 15mm, 11/16” 1/2”
n 06409 –
n 06384 GP,JR
Le Sabre
NO DRILL 40
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
See Instructions
45
3/4”, 9/16”
WIRING
1250 lb TW 12000 lb GTW
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
See Instructions
45
08-12
08-12
77-90
05-09
Le Sabre RWD
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
HITCH
NUMBER
n 06054 Ø,AI,FM
n 06003 –
84-96
1977
CLASS III/IV
CLASS III
45
45
30
45
30
45
45
40
45
45
30
40
5 25
l 44569 Ø,GP,JR
l 44569 Ø,GP,JR
18mm, 3/4”
18mm, 3/4”
NO DRILL 5
NO DRILL 5
5
5
25
25
–
–
–
–
–
–
BN
–
–
–
ABBREVIATIONS
# Hitches requires use of a 2-1/2" shank ball mount.
JT 2WD models only.
APPLICATIONS GUIDE
Enclave, w/o Tow Package
Enclave, with Tow Package
Estate Wagon Full Size
La Crosse All, Except Super
YEAR
MODEL
Century Wagon FWD
Electra RWD
APPLICATIONS GUIDE
CLASS II
CLASS I
77
MODEL
BUICK
MODEL
BUICK
76
REESE TOWPOWER
REESE TOWPOWER
30
30
n 51173 HM,JR,KH
15, 17mm,
9/16”, 3/4”
15, 17mm, 9/16”,
11/16”
15, 17mm, 9/16”,
11/16”
3/4”, 9/16”
1/2”
30
n 06125
Lucerne All Models
10-11
n 06125 Ø,HM,JR
Park Ave.
1991
n 06073 –
n 88001
Park Ave.
97-99
00-04
n 06993 Ø,HM
Regal Estate Wagon
Rendezvous All, Inc. Ultra
82-83
02-07
n 06407 –
n 06457 –
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
40
–
78013
–
40
–
78013
–
74682 78058
–
78058
–
30
60
–
78058
–
n 06407 –
11-12
FOOTNOTES
–
See Instructions
Regal, All Models
9/16”, 11/16”,
7/8”
HITCH
NUMBER
–
–
–
–
See Instructions
See Instructions
See Instructions
40 n 06411
AI,JR,TA
9/16”, 11/16”,
7/8”
See Instructions
40 n 06411
AI,JR,TA
See Instructions
60
–
78058
–
n 06305
40 n 06411
AW,FE,HB,JR,TA See Instructions
60
60
–
–
78058
78058
–
60
60
35
–
–
–
78058
78058
78058
–
85724 78104
CH
–
78058
85261 78058
–
–
–
–
–
AI,JR,TA
3/8”
See Instructions
n 06305 AW,FE,HB,JR,TA See Instructions
n 06305 AW,FE,HB,JR,TA See Instructions
Ø,TA
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
–
–
n 06263 JR
n 88002
93-94
95-96
97-04 – 77077
DRILL BITS
–
See Instructions
Regal Limited
Regal 2 & 4 Dr.
Regal (Application begins with 97-1/2)
WRENCHES
–
n 06263 JR
n 88002
AI,JR,TA
FOOTNOTES
–
1/2”
91-92
92-94 n 77001
HITCH
NUMBER
40
45
45
45
45
40
40
1/2”
See Instructions
1/2”
Regal GS
Regal 4 Dr., Except GS
STYLE
–
3/4”, 9/16”
AI,JR,TA
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
74696 78058
3/4”, 9/16”
1991 n 77001
DRILL BITS
NO DRILL 25
n 06073 –
n 88002
Regal 4 Dr., Except GS/Limited
WRENCHES
–
See Instructions
AI,JR,TA
FOOTNOTES
74696 78058
See Instructions
88-94 n 77001
HITCH
NUMBER
NO DRILL 25
n 88002
n 06073 –
Regal 2 Dr.
10, 15mm, 11/16” 1/8”,
7/16”,
9/16”
–
See Instructions
04-07
78-87
10, 15mm, 11/16” 1/8”,
7/16”,
9/16”
10, 15mm, 11/16” 1/8”,
7/16”,
9/16”
–
78058
74696 78058
n 88002
n 88001
Rainier
Regal All Models
WIRING
1250 lb TW 12000 lb GTW
NO DRILL 20 n 06262 JR
3/4”, 7/8”
1/2”
13mm, 3/4”, 7/8”, NO DRILL 20
9/16”
9/16”, 11/16”, 7/8” 3/8”
30
9/16”, 11/16”, 3/4” 3/8”
40 n 51151
Riviera
Riviera
Riviera
1977
1978
95-99
n 06003 –
n 06003 –
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
n 06285 GP,JR
n 88002
See Instructions
Roadmaster 4 Dr. Sedan
91-96
n 06003 –
n 88002
Roadmaster Estate Wagon Full Size
91-96
n 06409 –
n 88002
Skylark
Terraza All, Inc. AWD
92-98
05-07
n 06027 Ø,JR,KH
n 06302 AL,GP,JR
n 51102 AL,GP,JR
35
See Instructions
45
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
See Instructions
45
See Instructions
30
See Instructions
45
See Instructions
40
10, 15mm,
1/2”
40 n 51079
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
40
HM
AL,GP,JR
9/16”,
3/8”
11/16”, 3/4”
10, 15mm,
3/4”, 7/8”
1/2”
3.5
40
3.5 5 40
n 33061 Ø
15mm, 3/4”
n 44538 –
9/16”, 1/16”, 3/8”
3/4”
n 33094 AL,JR
n 44574 AL,JR
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
NO DRILL 3.5 –
55
–
–
–
–
BN
3.5 – 40
1/2”
3.5 5
40
1/2”
3.5 5
40
–
–
–
–
–
74487 78058
–
74491 78058
–
–
78058
85344 78058
–
BN
ABBREVIATIONS
JT 2WD models only.
QX Will not fit vehicles with dual exhaust.
APPLICATIONS GUIDE
Park Ave.
92-95
1996
INSTALL TIME
STYLE
1/2”
08-09
Park Ave.
Park Ave.
DRILL BITS
15, 17mm,
9/16”, 3/4”
Lucerne Super & Special Edition Models
91-94
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
See Instructions
CLASS V
500-750 lb TW 5000-7000 lb GTW
n 06409 –
n 06976 HM,JR
Ø,HM,JR
CLASS III/IV
CLASS III
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
YEAR
77-90
06-09
STYLE
MODEL
Le Sabre Wagon Full Size
Lucerne All, Except Super
& Special Edition Models
Park Ave.
APPLICATIONS GUIDE
CLASS II
CLASS I
79
MODEL
BUICK
MODEL
BUICK
78
REESE TOWPOWER
Escalade All, Inc. EXT
11/16”
11/16”
n 06003 Ø,†
n 06616 –
See Instructions
n 06616 –
n 06616 –
See Instructions
n 06614 JR,TA
13, 15mm,
11/16”, 7/8”
See Instructions
7/8”
13mm, 7/8”
13mm, 7/8”
NO DRILL 20
NO DRILL 20
13mm, 3/4”
NO DRILL 40
n 06265 JR
n 06298 Ø
n 06298 Ø
n 06157 Ø, JR
See Instructions
See Instructions
n 06995 –
n 51041
Ø,CN,HM
7/8”
85-94
n 06227 Ø,CR,HM
14, 15mm
NO DRILL 30
90-05
n 06037 Ø,GP,HC
n 06227 Ø,CR,HM
14, 15mm
Astro Extended Body
14, 15mm
NO DRILL 30
NO DRILL 30 n 51029 CS,GP
15, 17mm
n 06037 Ø,GP,HC
14, 15mm
NO DRILL 30 n 37042
See Instructions
n 88001
See Instructions
n 88001
n 88002
See Instructions
n 88002
n 88002
See Instructions
n 06157 Ø
n 06617 Ø,EP,GP,JR
7 30
10 15
n 44096 HM
7/8”
n 44656 HM
7/8”
n 37074 HM
7/8”
n 37072
Ø,CN,HM
22mm, 7/8”
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
22mm, 7/8”
n 44145 Ø,CN
See Instructions
See Instructions
13mm, 3/4”
See Instructions
–
3/4”, 7/8”
10 20
22mm, 7/8”
NO DRILL 5
NO DRILL 6
22mm, 7/8”
NO DRILL 6
10 20
10 15
7.5 30
30
NO DRILL 20
NO DRILL 20
1/2”
30
9/16”, 5/8”,
11/16”
–
–
–
85778
–
–
74180
78104
78104
78104
78104
–
78058
–
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
78104
78104
78104
78104
CH
–
–
–
–
–
CH
–
–
BN
74682 78058
85262
BN,N
74682 78058
85262
BN,N
–
–
–
–
–
–
–
–
78104
78104
78104
78104
78104
78104
78104
78104
–
TW
13mm, 19mm NO DRILL 3.5 5
10mm, 19mm NO DRILL 4 5
60
15
NO DRILL 3.5 6
3/8”, 1/2” 30
–
–
–
–
–
–
–
45
–
85217
–
30
n 33057 CR,HM
45
–
74051
–
n 37152 AF
1/2”,
9/16”
1/2”
3.5 6
45
15, 17mm,
3/4”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
15, 17mm
5
6
65
NO DRILL 3.5 6
NO DRILL 3.5 6
30
30
10 15
10 15
n 37072 Ø,CN,HM
15, 17mm,
3/4”
22mm, 7/8”
NO DRILL 6
10 20
74682 78058
85262
–
NO DRILL 5
NO DRILL 6
10
10
10
10
10
74682 78058
–
85709
85709
85709
85709
–
CG
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
22mm, 7/8”
n 37072 Ø,CN,HM
n 44095 Ø,CN,HM
22mm, 7/8”
22mm, 7/8”
NO DRILL 6
NO DRILL 5
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL 6
22mm, 7/8”
1/2”
n 06003 –
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
6
lb
0
3/4”
10 30
–
–
–
–
CH
NO DRILL 3.5 6
90
Ø,HM,TA
6
CH
15, 17mm,
3/4”
n 44010 Ø,CS,GP
n 33057 Ø,CS,GP
n 51041 Ø,CN,HM
3/4”
7.5 30
78104
78104
78104
78104
n 33057 Ø,CR,HM
45
03-06
Ø,HM,TA
5
lb
30
1/8”, 1/2” 45
n 51041 Ø,CN,HM
3/4”, 7/8”
7
25
40
NO DRILL 20
35
l 33086 Ø,JR,KH
l 44638 Ø
–
5
1/2”,
9/16”
1/2”,
9/16”
1/2”,
9/16”
NO DRILL
See Instructions
2002
– 77098
n 77181
n 77181
– 77097
5
74717
78033
74717
78033
0
n 06003 †,AO
n 06616 –
1/2”,
9/16”
77-96
86-92
85-92
77-92
93-96
89-93
92-97
98-04
04-09
10-12
05-11 n 77143
11/16”
DRILL BITS
30
n 51012 HM
JR,TA
WRENCHES
20
2002
04-06
2006
07-11
04-11
1977
FOOTNOTES
25
40
40
40
40
Fleetwood RWD
Fleetwood
Fleetwood FWD
Fleetwood Brougham
Fleetwood Brougham
Fleetwood Coupe & Sedan FWD
Seville All, Inc. SLS & STS
Seville All, Inc. SLS & STS
SRX All, Except Models w/Sport Package Fascia
SRX
STS
CHEVROLET
Astro Standan Body
Aveo 4 Dr. Sedan
Aveo 4 Dr. Sedan
Aveo 4 Dr. Sedan
Aveo 5 Dr. Hatchback
Bel Air
STYLE
1/8”, 1/2” 40
1/8”, 1/2” 40
03-06
Avalanche
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
1/8”, 1/2” 40
1/8”, 1/2” 40
Escalade All, Inc. EXT & ESV
Avalanche
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 77143 JR,TA
n 77143 JR,TA
11/16”
STANDARD WIRE
97-99
00-05
06-11
92-94
95-02
99-00
11/16”
WIRING
1250 lb TW 12000 lb GTW
T-CONNECTOR
De Ville
De Ville
DTS
Eldorado
Eldorado
Escalade Old Body Style
n 77143 JR,TA
n 77143 JR,TA
CLASS V
500-750 lb TW 5000-7000 lb GTW
TW
20
15
20
20
15
78013
78013
78013
78013
78058
CG
CG
CG
–
ABBREVIATIONS
AF Hitch is ONLY rated for weight carrying at 3,500 lbs. GTW, 350 lbs. TW and DO
NOT use w/weight distribution spring bars for this specific vehicle, except for
long bed trucks.
JT 2WD models only.
81
APPLICATIONS GUIDE
03-07
08-12
04-07
08-12
1977
86-88
89-92
1993
94-96
STYLE
YEAR
MODEL
CADILLAC
CTS
CTS 4 Dr. Sedan Only
CTS-V
CTS-V 4 Dr. Sedan Only
De Ville FWD
De Ville FWD
De Ville FWD
De Ville FWD
De Ville Inc. Concours
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
90
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - CHEVROLET
CADILLAC
CADILLAC - CHEVROLET
MODEL
80
REESE TOWPOWER
78-81
Blazer Full Size
Blazer Full Size
Blazer Full Size
Blazer Full Size
73-75
76-84
85-91
92-94
n 06003 –
n 88001
9/16”, 5/8”,
11/16”
See Instructions
n 06955 Ø,GP
95-97
18mm, 7/8”
1/2”
n 33042 –
n 37074 HM
3/4”, 7/8”
1/2”
n 06955
99-01
18mm, 7/8”
02-05
–
18mm,
NO DRILL 4
1-1/8”
See Instructions
6 15
n 44656 HM
l 33015 Ø,SD
18mm, 1-1/8” NO DRILL 4
6 15
n 33021 Ø
l 37051 JT
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
NO DRILL 15 n 51031 Ø,FP,HM,KK 18mm,
NO DRILL 4
1-1/8”
l 37041
See Instructions
6 15
n 44098 Ø,HM
l 33015 Ø,SD
18mm, 1-1/8” NO DRILL 4
6
6
6
6
6 15
n 33021 Ø,FP,KK
l 37051 FP,JT,KK
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
6
6
20
30
n 44098 Ø,FP,
18mm, 1-1/8” NO DRILL 4
6
20
18mm, 7/8”
NO DRILL 4
6
15
NO DRILL 15 n 51031
1-1/8”
See Instructions
18mm,
1-1/8”
NO DRILL 4
6 15
l 33015
NO DRILL 4
6 15
n 33021 Ø,FP,KK
l 37051 FP,JT,KK
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
6
6
20
30
n 44098 Ø,FP,
18mm, 1-1/8” NO DRILL 4
6
20
6 15
l 33015 Ø,SD
18mm, 7/8”
NO DRILL 4
6
15
6 15
n 33021 Ø,FP,KK
l 37051 FP,JT,KK
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
6
6
20
30
n 44098 Ø,FP,
18mm, 1-1/8” NO DRILL 4
6
20
NO DRILL 15 n 51031 Ø,FP,HM,KK 18mm,
NO DRILL 4
1-1/8”
l 37041
See Instructions
18mm,
1-1/8”
NO DRILL 4
HM,KK
FOOTNOTES
–
n 44096 HM
Ø,SD
STANDARD WIRE
–
7 30
Ø,FP,HM,KK 18mm,
T-CONNECTOR
20
30
20
15
5
NO DRILL 4
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
–
30
1/2”,
9/16”
18mm,
1-1/8”
DRILL BITS
–
7
7/8”
NO DRILL 4
WRENCHES
–
30
n 51012 HM
18 mm, 7/8”
FOOTNOTES
7.5 30
6 15
6
n 37152 –
NO DRILL 15 n 51031 Ø,HM
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
BN
7 30
n 51031 Ø,HM
Camaro Inc. Z-28 & SS, Except w/Dual
Exhaust Pipes On Drivers Side
Camaro Inc. Z-28 & SS, Except w/Dual
Exhaust Pipes On Drivers Side
Camaro All Models, except convertible &
dealer-installed ground effects
Camaro All Models, except convertible &
dealer-installed ground effects
Caprice
Caprice
Caprice
78058
78058
78058
78058
30
30
30
30
5
HM,KK
Blazer Downsize, All Models
1/2”,
9/16”
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
7/8”
1/2”,
5
9/16”
7/8”
1/2”, 9/16” 5
74425
74425
74178
78180
7.5
7.5
7.5
10
1/2”,
9/16”
l 37041
n 51031 Ø,HM
n 06955 Ø,FP,GP,KK 18mm, 7/8”
7/8”
5
5
5
6
–
7/8”
HM,KK
DRILL BITS
1/2”
3/4”, 7/8”
78058
n 51012 HM
n 51031 Ø,HM
Ø,FP,GP,KK
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
45
See Instructions
3/4”, 7/8”
–
BN
BN
BN
85262 78091
BN,N
–
–
–
–
78013
–
93-96 n 77006 JR
7/8”
9/16”
40
97-02 n 77006
JR
7/8”
9/16”
40
10-11 n 77223
Ø,GP
13mm, 9/16”
NO DRILL 15
85710 78104
CH
2012 n 77223
Ø,GP
13mm, 9/16”
NO DRILL 15
–
–
1977
78-90
91-96
n 06003 –
n 06003 –
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
n 06003 –
n 88002
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
See Instructions
45
Caprice Estate Wagon
Caprice Estate Wagon
77-90
91-96
n 06409 –
n 06409 –
See Instructions
See Instructions
30
30
n 88002
See Instructions
45
Cavalier 2 & 4 Dr., Except Z-24
Cavalier All, Except Z-24
88-90 n 77101
95-99 n 77049
†,TA
See Instructions
GP,JR
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
n 51163 GP,JR
Cavalier Z-24
95-99 n 77069
JR,KH
Cavalier All, Inc. RS & Z-24
95-02 n 77049
GP,JR
Cavalier All, Inc. Z-24
00-01 n 77049
GP,JR
n 51163 GP,JR
n 33007 –
13mm, 14mm, 13/32”
3/4”
3.5 10 40
–
–
78058
–
78058
74487 78058
–
–
78058
74491 78058
–
–
–
78058
78058
–
–
–
–
7/16”
30
40
7/16”
40
1/2”
40
–
78058
–
7/16”
40
–
78058
–
7/16”
40
–
78058
–
7/16”
40
–
ABBREVIATIONS
JT 2WD models only.
83
APPLICATIONS GUIDE
n 06955 Ø,FP,GP,KK 18mm, 7/8”
1998
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
45 n 37042
n 33042 –
n 33042 –
WIRING
1250 lb TW 12000 lb GTW
3/8”, 1/2” 30
l 37041
n 51031 Ø,HM
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Bel Air
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL
CHEVROLET
CHEVROLET
MODEL
82
REESE TOWPOWER
REESE TOWPOWER
2002 n 77049
40
7/16”
40
1/2”
JR
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
–
7/16”
40
1/2”
40
–
78058
–
1/2”
40
–
78058
–
1/2”
JR
3/4”
1/2”
HM,JR
3/4”
1/2”
78058
78058
78058
78058
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
78035 78058
BN
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
78043 78058
BN
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
78035 78058
BN
HM,JR
3/4”
1/2”
40
40
25
25
25
25
25
25
25
25
–
78043
78035
78043
–
3/4”
78001 78013
85262
74682
78001 78013
85262
74682
–
–
BN,CG
–
78058
85732 78104
–
78058
–
78028 78013
CG
74709 78013
CE
85716 78104
–
85716 78104
12 35 74659 78013
14 45
–
10 12 35 85246 78013
14 45
HG
12 35 74886 78013
14 45
–
JR,KH
n 06054 Ø,AI,FM
13mm, 7/8”
NO DRILL 40
n 51074 Ø,GP
n 51074 Ø,CP,GP
08-12
Corvette
97-04 n 77260
–
13mm, 11/16”,
3/4”
1/2”, 1”
hole saw
Corsica
Cruze All Models
El Camino
87-96
11-12 n 77232
78-87
Ø,GP
11/16”
NO DRILL 15
Equinox
05-06
2003
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
78058
03-05 n 77069
00-02
DRILL BITS
–
Cavalier Z-24 (Canada Only)
10-12
96-99
WRENCHES
40
JR,KH
Equinox All, Except V6 Models
Express Van Full Size
FOOTNOTES
7/16”
03-05 n 77069
10-12
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
–
Cavalier LS Sport
FOOTNOTES
78058
n 51163 GP,JR
HITCH
NUMBER
–
21, 22mm,
11/16”
NO DRILL 6
21, 22mm,
11/16”
NO DRILL 6
7.5 25
7.5 25
n 44593 Ø,GP
n 44593 Ø,GP
21, 22mm,
11/16”
NO DRILL 6
21, 22mm,
11/16”
NO DRILL 6
7.5 25
7.5 25
35
n 06407 –
30
3/8”
n 06391 Ø,HM
9/16”, 11/16”,
7/8”
18, 19mm, 3/4”
n 51185 Ø,HM
18, 19mm, 3/4”
NO DRILL 25
n 06391 Ø,HM
18, 19mm, 3/4”
n 51185 Ø,HM
18, 19mm, 3/4”
NO DRILL 25
n 06391 Ø,HM
18, 19mm, 3/4”
n 51185 Ø,HM
18, 19mm, 3/4”
NO DRILL 25
n 06099 Ø,HM
n 88001
See Instructions
n 06099 Ø,HM
n 88001
n 06099 Ø,HM
n 88001
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions
15 l 37041
n 37042
n 51023
15 l 37041
n 37042
n 51023
15 n 51023
45 l 37041
n 37042
18, 19mm,
3/4”
NO DRILL 3.5 4
30
n 44637 Ø,HM
n 44630 Ø,†,HM
18, 19mm,
3/4”
NO DRILL 3.5 4
30
n 44637 Ø,HM
n 44630 Ø,†,HM
18, 19mm,
3/4”
NO DRILL 3.5 4
NO DRILL 5
45
45
10 15
45
45
10 15
See Instructions
See Instructions
Ø,HM
3/4”, 7/8”
See Instructions
See Instructions
Ø,HM
3/4”, 7/8”
NO DRILL 5
Ø,HM
3/4”, 7/8”
NO DRILL 5
See Instructions
See Instructions
30
10 15
45
45
n 44637 Ø,HM
n 44630 Ø,†,HM
n 37004 Ø,HM
l 37051 HM
n 37152 HM
n 44028 Ø,HM
n 37004 Ø,HM
l 37051 HM
n 37152 HM
n 44028 Ø,HM
n 37004 Ø,HM
l 37051 HM
n 37152 HM
n 44028 Ø,HM
18, 19mm,
3/4”
18, 19mm,
3/4”
18, 19mm,
3/4”
18, 19mm,
3/4”
18, 19mm,
3/4”
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
18, 19mm, 3/4” NO DRILL 3.5 4 30
3/4”
NO DRILL 5 10 20 n 41921 @,HM
13/16”, 15/16” 9/16”
10
3/4”
1/2”
NO DRILL 12
5 6 35 n 45007 Ø,#,HM,TF 3/4”
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
3/4”
3/4”
NO DRILL 5
1/2”
5
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
3/4”
3/4”
NO DRILL 5
1/2”
5
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
6
30
10
10
6
6
30
20 n 41921
35 n 45007
30
10
10
6
6
30
20 n 41921
35 n 45007
30
10 30
@,HM
13/16”, 15/16” 9/16”
Ø,#,HM,TF 3/4”
@,HM
BN
BN
Factory 7-Way
models only
BN,CG
Factory 7-Way
models only
–
CH
–
HG
NO DRILL 12
13/16”, 15/16” 9/16”
Ø,#,HM,TF 3/4”
BN
10
NO DRILL 12
ABBREVIATIONS
CE T-connector includes fuse(s) & relays(s), converter not required. Standard 2 wire system at factory tow plug.
FM On vehicles equipped with load leveling device, air pump mounting modification required.
JT 2WD models only.
APPLICATIONS GUIDE
40
GP,JR
Equinox All Models
1250 lb TW 12000 lb GTW
–
03-05 n 77049
07-09
500-750 lb TW 5000-7000 lb GTW
WIRING
78058
Cavalier All, Except LS Sport
Equinox
CLASS V
–
JR,KH
Colorado All Models
INSTALL TIME
STYLE
7/16”
2002 n 77069
84-90
05-10 n 77122
05-10 n 77122
08-10 n 77132
n 51164
08-10 n 77132
Cobalt Sport 4 Dr.
n 51164
Cobalt SS 2 Dr., Inc. Supercharged Models 05-10 n 77132
n 51164
05-10 n 77132
Cobalt SS 4 Dr.
n 51164
04-07
Colorado All Models
DRILL BITS
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
GP,JR
Cavalier Z-24
Celebrity Wagon
Cobalt 2 Dr., Except SS Models
Cobalt 4 Dr., Except SS Models
Cobalt Sport 2 Dr.
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Cavalier All, Except Z-24
CLASS III/IV
CLASS III
n 51163 GP,JR
APPLICATIONS GUIDE
CLASS II
CLASS I
85
MODEL
CHEVROLET
CHEVROLET
MODEL
84
REESE TOWPOWER
REESE TOWPOWER
04-07
04-12
n 06099 Ø,HM
n 88001
HHR SS
Impala All Models
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
EP,HM,JR
3/4”
1/2”
11/16”, 7/8”
1/2”
–
11/16”, 7/8”
1/2”
20 n 06389
20 n 51188
n 06389
n 51188
n 06003
n 37004 Ø,HM
l 37051 HM
3/4”
n 37152 HM
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
10 20 n 41921
6 35 n 45007
6 30
Ø,GP,JR
3/4”
Ø,GP,JR
3/4”
Ø,GP,JR
3/4”
–
9/16”, 5/8”,
11/16”
See Instructions
FOOTNOTES
STANDARD WIRE
78043 78058
BN
78043 78058
BN
–
78058
–
78058
85735 78058
–
NO DRILL 30
NO DRILL 30
74694 78013
BN
3/8”, 1/2” 30
74487 78058
–
3/4”, 7/8”
See Instructions
NO DRILL 5
10 15
3/4”
NO DRILL 5
1/2”
5
@,HM
13/16”, 15/16” 9/16”
Ø,#,HM,TF 3/4”
NO DRILL 12
10 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
3/4”
T-CONNECTOR
CH
See Instructions
Ø,GP,JR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
See Instructions
Ø,HM
25
25
25
35
n 06003
n 06003 –
–
1250 lb TW 12000 lb GTW
NO DRILL 30
NO DRILL 30
–
–
Impala SS
94-96
Kodiak C4500, Cab & Chassis w/34
Wide Frames
Wide Frames
Kodiak C6500, Cab &
Chassis w/34 Wide Frames
Wide Frames
Wide Frames
Lumina All, Except Z-34
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
–
78058
–
Lumina All Models
Lumina APV Van
Lumina APV Van
Lumina APV Van
Malibu All Models
Malibu 4 Dr.
Malibu 4 Dr. Sedan Only
Malibu SS 4 Dr. Sedan Only
Malibu All, Except LTZ
Malibu LTZ
Malibu Classic 4 Dr. Old Body Style
Malibu Classic 4 Dr. Sedan Only (Old Body Style)
Malibu Classic SS 4 Dr. Sedan Only (Old Body Style)
Malibu Maxx
Malibu Maxx All, Except SS
Malibu Wagon
Monte Carlo
Monte Carlo All, Inc. Z-34
Monte Carlo Inc. SS (Will not fit SS
Sport Appearance Pkg.)
Monte Carlo Inc. SS (Will not fit SS
Sport Appearance Pkg.)
Pickup, C/K Series w/6 ft. Bed
95-00
90-92
1993
94-96
78-83
97-03
04-07
06-07
08-12
08-12
04-05
2008
2008
04-05
06-07
78-83
78-88
95-99
00-05
–
–
74492
74492
–
–
74716
74716
78066
–
–
74716
74716
74716
74716
–
–
–
–
78058
78058
78058
78058
78058
–
78013
78013
78058
78104
–
78013
78013
78013
78013
–
78058
78058
78013
–
–
78058
–
–
78058
74425 78058
–
n 88002
90-94 n 77001
06-07
– 77259
AI,JR,TA
AI
n 77076 Ø,GP
n 77076 Ø,GP
– 77259
– 77185
10, 15mm, 11/16” 1/8”,
7/16”,
9/16”
13mm, 3/4”
1/2”
13mm, 3/4”
13mm, 3/4”
AI
13mm, 3/4”
TA
7/8”
40 n 06411
30 n 06022
n 06091
n 06091
n 06091
n 06407
NO DRILL 15 n 06249
n 06988
n 06988
n 06658
n 06658
NO DRILL 15 n 06249
n 06988
n 06988
n 06388
n 06388
n 06407
n 06407
1/2”
30 n 06022
1/2”
20 n 06358
AI,JR,TA
See Instructions
Ø,JR
See Instructions
–
See Instructions
–
AL,GP
–
–
JR
JR,X
GP,JR,RB
GP,JR,RB
–
JR
JR,X
–
–
–
–
Ø,JR
Ø,JR
n 06358 Ø,JR
45
60
60
40
See Instructions
40
40
9/16”, 11/16”, 7/8” 3/8”
30
See Instructions
20
See Instructions
40
See Instructions
50
11/16”, 3/4”
1/2”, 3/8” 45
11/16”, 3/4”
1/2”, 3/8” 45
See Instructions
20
13mm, 11/16”, 3/4” 3/8”
40
13mm, 11/16”, 3/4” 3/8”
50
3/4”
1/2”
25
3/4”
1/2”
25
9/16”, 11/16”, 7/8” 3/8”
30
9/16”, 11/16”, 7/8” 3/8”
30
See Instructions
60
13mm, 7/8”
–
30
13mm, 7/8”
–
n 33068 †,AL
n 33068 †,AL
13mm, 9/16” 1/2”
n 33068 †,AL
13mm, 9/16” 1/2”
13mm, 9/16” 1/2”
3.5 3.5 30
3.5 3.5 30
3.5 3.5 30
30
67-72
73-84
n 33065 CQ,DX,FP See Instructions
n 44108 CQ,FP,GU, 18mm, 3/4”
HM,HX
deep socket
n 44109 CQ,FP,GP, 18mm, 3/4”
GU,HX
deep socket
1/2”
5
5
6
8 30
8 40
10 30
1/2”
6
10 30
–
–
–
–
–
BN
BN
BN
–
–
BN
BN
BN
BN
–
–
–
–
BN
ABBREVIATIONS
DX Requires six 3/8" spacer blocks (#01077-011 and six 1/2-13 x 2-1/4 GRS
carriage bolts (#01266-009), which are not provided (sold separately).
JT 2WD models only.
RB Hitch installation can be made easier with a "cutter" type drill bit.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Impala
Impala
Impala All Models
06-11 n 77132
n 51164
08-10 n 77132
n 51164
1977
78-85
00-05 – 77082
– 51099
06-12
WIRING
10 12 35 78029 78058
14 45
See Instructions
n 44028 Ø,HM
HHR
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
l 37041
15 n 51023
n 37042
CLASS V
500-750 lb TW 5000-7000 lb GTW
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
87
MODEL
CHEVROLET
CHEVROLET
MODEL
86
REESE TOWPOWER
REESE TOWPOWER
10 30
1/2”
6
10 30
FOOTNOTES
5 10 20
l 37094 Ø
15/16”, 3/4” 5/8”
7
12 40
74180 78058
99-00
Classic Only
10 40
l 37069 –
9/16”, 3/4”
5
7.5 40
10 40
n 44105 Ø,GP
13, 18, 19mm, NO DRILL 5
3/4”, 7/8”
10 25
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
5 10 20
n 44108 CQ,FP,GU, 18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP,
18mm, 3/4”
GU,HX
deep socket
n 41522 CO,HK
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
1/2”
6
10 30
1/2”
6
10 30
5
5.5 40
85741 78058
BN
13, 18, 19mm, NO DRILL 6
7/8”
10 20
85741 78058
BN
10 40
n 33065 FP
10 40
n 37087 FP
3/4”, 7/8”
n 37081 M
13, 18, 19mm, NO DRILL 5
7/8”
10 40
n 33065 FP
See Instructions
10 40
n 37087 FP
3/4”, 7/8”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
1/2”
5
8
30 n 41938
@
13/16”, 7/8”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
9/16”
12 15 40 –
–
–
78058
–
12 15 40 74425 78058
BN
15 16 35
–
10 30
5
8
30 n 41938
@
13/16”, 7/8”
1/2”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
1/2”
6
10 30
1/2”
6
10 30
n 37081 M
13, 18, 19mm, NO DRILL 5
7/8”
10 40
10 40
n 33065 FP
See Instructions
10 40
n 37087 FP
3/4”, 7/8”
n 44108 FP,GU,
18mm, 3/4” 1/2”
6
deep socket
18mm, 3/4” 1/2”
6
deep socket
13, 18, 19mm, NO DRILL 5
7/8”
9/16”
15 16 35
45
45 n 51016
CQ,HM,JT
n 51017 CQ,GP,JT
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
HM,HX
n 44109
FP,GP,
GU,HX
n 37081 M
85-87
See Instructions
STANDARD WIRE
See Instructions
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
GU,HX
n 88001
T-CONNECTOR
n 51022 Ø,GP
n 44109 FP,GP,
See Instructions
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
BN
HM,HX
n 88001
DRILL BITS
85741 78058
n 51017 CQ,GP,JT
85-87
BN
12 40
n 51016 CQ,HM,JT
See Instructions
85741 78058
7
63-72
n 88001
10 13
15/16”, 3/4” 5/8”
n 51016 CQ,HM,JT
82-84
73-84
13, 18, 19mm, 9/16”
13/16”, 15/16”
l 37034 Ø
n 37080 Ø,FS,J
73-84
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
DRILL BITS
6
BN
45 n 51016
CQ,HM,JT
n 51017 CQ,GP,JT
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 33065 FP
See Instructions
10 40
n 37087 FP
3/4”, 7/8”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
HM,HX
n 44109 FP,GP,
GU,HX
1/2”
5
8
30 n 41938
@
13/16”, 7/8”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
9/16”
74425 78058
BN
12 15 40 74178 78058
BN
15 16 35
10 30
10 30
74178 78058
BN
12 15 40 85741 78058
BN
10 40
5
8
30 n 41938
@
13/16”, 7/8”
1/2”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
1/2”
6
10 35
1/2”
6
10 35
9/16”
15 16
ABBREVIATIONS
CO Will not fit 8 ft. 2500/3500 Series with heavy-duty suspension or four door Crew Cab.
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
1/2”
74178 78058
45
n 51017 CQ,GP,JT
88-91
40
See Instructions
n 51021 Ø,HM,J
Pickup, C/K Series w/8 ft. Bed w/Deep
Drop Bumper
Pickup, C/K Series w/8 ft. Bed 4 Dr.
Crew Cab
8
n 37096
n 51017 GP,FP
Drop Bumper
5
HM,SS
Pickup, C/K Series w/8 ft. Bed equipped w/ 88-00
aftermarket Roll Pan
Pickup, C/K Series w/6 ft. Bed Regular & 88-00
Extended Cabs, Inc. Sportside Fenders w/10 Deep
Drop Bumper
63-72
WIRING
1250 lb TW 12000 lb GTW
n 41909 @,EK,
n 51016 HM,FP
Drop Bumper
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 44108 CQ,FP,GU, 18mm, 3/4”
HM,HX
deep socket
n 44109 CQ,FP,GP, 18mm, 3/4”
GU,HX
deep socket
85-87
88-00
Extended Cab, Inc. Sportside Fenders
Pickup, C/K Series w/6 ft. Bed 2 Dr. Regular 88-00
& Extended Cabs, Inc. Sportside Fenders
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
89
MODEL
CHEVROLET
CHEVROLET
MODEL
88
REESE TOWPOWER
REESE TOWPOWER
n 88001
See Instructions
See Instructions
See Instructions
5
10 40 n 41901
@,DB,
GP,SN
18, 19mm,
13/16”, 7/8”
9/16”
#,TF
3/4”
1/2”
l 37034 Ø
15/16”, 3/4” 5/8”
7
12 40 n 45006
n 51016 HM
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
l 37069 Ø
9/16”, 3/4”
1/2”
5
7.5 40
10 40
l 37094 Ø
15/16”, 3/4” 5/8”
7
12 40
n 44105 Ø,GP
5
10 25
6
10 30
6
10 30
n 37080 Ø,FS,J
13, 18, 19mm, NO DRILL
3/4”, 7/8”
18mm, 3/4” 1/2”
deep socket
18mm, 3/4” 1/2”
deep socket
See Instructions
6
10 20
88-00
BN
12 14
74180 78058
99-00
Classic Only
85741 78058
BN
45
n 36007 Ø
See Instructions
5
10 40 n 41901
@,DB,
GP,SN
18, 19mm,
13/16”, 7/8”
9/16”
10 13
85741 78058
BN
n 51022 Ø,GP
See Instructions
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
5 10 20
l 37034 Ø
15/16”, 3/4” 5/8”
7
12 40 n 45006
#,TF
3/4”
1/2”
12 14
74180 78058
99-00
Classic Only
10 40
l 37069 Ø
9/16”, 3/4”
1/2”
5
7.5 40
10 40
l 37094 Ø
15/16”, 3/4” 5/8”
7
12 40
n 44105 Ø,GP
13, 18, 19mm, NO DRILL 5
3/4”, 7/8”
See Instructions
6
10 25
–
–
–
–
–
–
n 51021 Ø,HM,J
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
5 10 20
n 37080 Ø,FS,J
92-00
10 20
n 41938 @,CC
85-00
13/16”, 7/8”
9/16”
12 15
n 41940 @
See Instructions
45 l 51072
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
NO DRILL 6
8
l 51081 Ø,RT,JL,RO 21, 22mm, NO DRILL 6
3/4”
n 37096
See Instructions
10.5 15
l 44563 Ø,JL,RO
NO DRILL 6
10.5 15
45
n 44619 Ø,CM,RO
NO DRILL 6
7.5 15
l 51072 Ø,RT,JL
7.5 15
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
21mm,
3/4”,7/8”
21mm,
3/4”,7/8”
NO DRILL 5
n 37016 Ø,RO
l 37094 Ø,RO
l 44564 Ø,JL,RO
n 88001
See Instructions
45 l 51072
Ø,RT,JL
l 51081 Ø,RT,JL
n 37096
l 51072 Ø,RT,JL
NO DRILL 5
7.5 15
l 33093 Ø,JL
21, 22mm, NO DRILL 6
3/4”
See Instructions
10.5 15
l 44563 Ø,JL
45
7.5 15
n 37016 Ø
n 44619 Ø,CM
21mm,
3/4”,7/8”
21mm,
3/4”,7/8”
NO DRILL 5
l 37034
l 37069 Ø
Ø,RO
n 44564 Ø,JL
21mm, 13/16”, 9/16”
15
7/8”
15 n 41932 Ø,@,JL,RO 21mm, 7/8” NO DRILL 12
NO DRILL 5
Ø,RT,JL,RO
l 37034 Ø,RO
l 37069 Ø,RO
Pickup, Silverado 1500 LD 99-02
8 ft. Bed, 2 & 4 WD
FOOTNOTES
85741 78058
See Instructions
n 51017 GP
n 88001
STANDARD WIRE
10 13
n 37096
n 51016 HM
6.6 ft. Bed, 2 & 4 WD
T-CONNECTOR
BN
7
5
15/16”, 3/4” 5/8”
7
21mm, 3/4”, NO DRILL 6
12
7.5
12
8
25
25
25
15
NO DRILL 6
8
15 n 41932
NO DRILL 6
10.5 15
9/16”, 3/4”
1/2”
7/8”
21mm, 3/4”,
7/8”
NO DRILL 7.5 12 20
3/4”
15/16”, 3/4” 5/8”
7
5
9/16”, 3/4”
7/8”
14 20 74180 78058
99-00
Classic Only
14 20 78071 –
BN,N
NO DRILL 7.5 12 20
15/16”, 3/4” 5/8”
21, 22mm,
3/4”
21mm, 3/4”
16
1/2”
7.5 15
12 25
7.5 25
8 15
Ø,@,JL
21mm, 7/8”
NO DRILL 12
ABBREVIATIONS
CC Requires minimum of 19" from end of frame rail to spring shackle bracket.
JT 2WD models only.
SN Hitches produced before 04/28/08 are rated at 1000/310000 WC & 1200/12000 WD.
APPLICATIONS GUIDE
10 20
GU,HX
85741 78058
10 40
5
5 10 20
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
n 36007 Ø
HM,HX
APPLICATIONS GUIDE
HITCH
NUMBER
45
n 44109 FP,GP,
Pickup, C/K Series w/8 ft. Bed 4 Dr. Crew
Cab, w/10 Deep Drop Bumper
Pickup, C/K Series, Cab & Chassis w/34
Wide Frames
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
13, 18, 19mm, NO DRILL 5
7/8”
n 44108 FP,GU,
92-00
DRILL BITS
n 37081 M
See Instructions
n 51021 Ø,HM,J
WIRING
1250 lb TW 12000 lb GTW
n 51022 Ø,GP
n 51017 GP
Pickup, C/K Series w/8 ft. Bed Regular &
Extended Cabs, w/10 Deep Drop Bumper
Crew Cab
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
45 n 37096
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup, C/K Series w/8 ft. Bed 4 Dr. Crew 88-91
Cab w/Deep Drop Bumper
Pickup, C/K Series w/8 ft. Bed 2 Dr. Regular 88-00
& Extended Cabs
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
91
MODEL
CHEVROLET
CHEVROLET
MODEL
90
REESE TOWPOWER
REESE TOWPOWER
n 88001
See Instructions
21mm, 3/4”,
7/8”
NO DRILL 6
l 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
n 37016 Ø
21mm, 3/4”
NO DRILL 7.5 12 20 n 45009 Ø,#,TF
NO DRILL 5
7.5 15
l 37034 Ø,RO
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø,RO
9/16”, 3/4”
l 44563 Ø,JL
21, 22mm,
3/4”
7/8”
21, 22mm, 3/4” NO DRILL 6
Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
n 44619 Ø,CM
l 33093 Ø,JL
l 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
NO DRILL 5
7.5 15
45 l 51072
Ø,RT,JL
See Instructions
7
12 25
9/16”, 3/4”
5
7.5 25
10.5 15
8 15
NO DRILL 5
7.5 15
n 44619 Ø,CM
l 33093 Ø,JL
l 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
NO DRILL 5
7.5 15
45 n 51050
See Instructions
See Instructions
7.5 15
8 15 n 41932
21mm, 3/4”,
7/8”
NO DRILL 6
n 37016 Ø
21mm, 3/4”
NO DRILL 7.5 12 20
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
21, 22mm,
3/4”
Ø,@,JL
14 20 78071 –
BN,N
21mm, 3/4”
NO DRILL 12
14 20
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14 20 78071 –
85217 –
5
7
NO DRILL 6
7.5 25
12 25
10.5 15
NO DRILL 6
8
NO DRILL 6
7.5 15
NO DRILL 6
11 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
21, 22mm, 1/2”
6
3/4”, 7/8”
21, 22mm, 3/4” NO DRILL 6
12 20 n 45022
Ø,#,CS,FS,
LT,TF
18, 21mm
11 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
6
12 20 n 45022
Ø,#,CS,FS,
LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,FS
18, 21mm
NO DRILL 18
18 25
l 44577 Ø,CS,FS,
3/4”
See Instructions
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
NO DRILL 5
10 20
l 44577 Ø,CS,FS,
21, 22mm, 3/4” NO DRILL 6
11 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
l 51073 Ø,RT,CS,
21, 22mm,
3/4”
NO DRILL 5
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
6
12 20 n 45022
Ø,#,CS,FS,
LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,FS, 18, 21mm
NO DRILL 18
18 25
l 51072
Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
SA
45 n 51050
SA
JL,LT
JL,LT
21, 22mm,
3/4”, 7/8”
1/2”
45
,LT,TF
JL,LT
1/2”
See Instructions
7.5 15
l 33093
Ø,JL
21mm, 3/4”,
7/8”
NO DRILL 6
8
10.5 15
l 44563 Ø,JL
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL 6
10.5 15 n 45009
NO DRILL 6
7.5 15
n 44619 Ø,CM
n 37016 Ø
l 37034 Ø
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
9/16”, 3/4”
l 44564 Ø,JL
21mm, 3/4”,
7/8”
with amber
bulbs)
15 n 41932
NO DRILL 13
15 25 78071 –
BN,N
17 25
15 25 78071 –
15 25 78071 –
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14 20 78071 –
Ø,#,TF
21mm, 3/4”
NO DRILL 12
14 20
BN,N
BN,N
BN,N
NO DRILL 7.5 12 20
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø
BN,N
15
10 20
45 n 51050
21, 22mm,
3/4”, 7/8”
FOOTNOTES
NO DRILL 12
12 25
1/2”
STANDARD WIRE
21mm, 7/8”
7
15/16”, 3/4” 5/8”
T-CONNECTOR
99-00
Classic Only
LT,TF
n 88001
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
14 20 74180 –
n 44657 HM,SA
FS,JL,LT
6.6 ft. Bed, 2 & 4 WD
DRILL BITS
WRENCHES
NO DRILL 12
7.5 20
n 37096
n 88001
21mm, 3/4”
3/4”
21, 22, 3/4”, NO DRILL 5
7/8”
FS,JL,LT
01-02
BN,N
l 44577 Ø,CS,FS,
l 51073 Ø,RT,CS,
Pickup, Silverado 3500
Series 8 ft. Bed, 2 & 4 WD
14 20 78071 –
10 20
FS,JL,LT
n 88001
1/2”
NO DRILL 12
NO DRILL 5
SA
l 51073 Ø,RT,CS,
Pickup, Silverado 2500 HD 01-02
8 ft. Bed, 2 & 4 WD
7.5 15
8 15 n 41932
15/16”, 3/4” 5/8”
21, 22mm, 3/4” NO DRILL 6
7/8”
21, 22mm, 3/4” NO DRILL 6
21mm, 7/8”
15
l 37034
Ø,RO
n 44619 Ø,CM
n 88001
8
NO DRILL 7.5 12 20 n 45009 Ø,#,TF
l 44564 Ø,JL
6.6 ft. Bed, 2 & 4 WD
7.5 25
12 25
10.5 15
21mm, 3/4”
21mm,
3/4”,7/8”
l 51072 Ø,RT,JL
5
7
NO DRILL 6
1/2”
n 37016 Ø
Ø,RT,JL
45 l 51072
12 25
NO DRILL 6
l 44564 Ø,JL
See Instructions
7
Ø,@,JL
21mm, 3/4”,
7/8”
l 37069 Ø
l 44563 Ø,JL
n 88001
8
15 n 41932
FOOTNOTES
l 33093 Ø,JL
l 51072
6.6 ft. Bed, 2 & 4 WD
HITCH
NUMBER
7.5 15
1/2”
15/16”, 3/4” 5/8”
7
5
7
NO DRILL 6
12 25
7.5 25
12 25
8
15
85217 –
(with
amber
bulbs)
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
See Instructions
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
NO DRILL 5
l 44564 Ø,JL
n 88001
DRILL BITS
21mm,
3/4”,7/8”
15/16”, 3/4” 5/8”
WIRING
1250 lb TW 12000 lb GTW
Ø,RT,JL
l 51072 Ø,RT,JL
8 ft. Bed, 2 & 4 WD
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
45 l 51072
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
6.6 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
93
MODEL
CHEVROLET
CHEVROLET
MODEL
92
REESE TOWPOWER
REESE TOWPOWER
n 88001
APPLICATIONS GUIDE
n 88001
See Instructions
See Instructions
NO DRILL 6
10.5 20 78071 –
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
21, 22mm, 3/4” NO DRILL 6
8
15 n 45009
Ø,#,TF
21mm, 3/4”
NO DRILL 12
14 20
n 44619 Ø,#,TF
n 37016 Ø
21, 22mm, 3/4” NO DRILL 12 14 20
21mm, 3/4” NO DRILL 7.5 12 20
15/16”, 3/4” 5/8”
7 12 25
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14 20 78071 –
BN,N
85217 –
(with
amber
bulbs)
NO DRILL 6
5
7.5 25
7.5 15
NO DRILL 6
8
7.5 15
l 44564 Ø,CM
NO DRILL 5
7.5 15
l 33093 Ø,JL
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
21, 22mm, 3/4” NO DRILL 6
n 37096
l 51072 Ø,RT,JL
See Instructions
NO DRILL 5
45
7.5 15
n 44619 Ø,CM
n 37016 Ø
21, 22mm, 3/4” NO DRILL 6 7.5 15
21mm, 3/4” NO DRILL 7.5 12 20
l 37034 Ø,RO
l 37069 Ø
15/16”, 3/4” 5/8”
45 l 51072
Ø,RT,JL
21mm,
3/4”,7/8”
9/16”, 3/4”
1/2”
l 37094 Ø
l 44564 Ø,JL
7
5
15/16”, 3/4” 5/8”
7
7/8”
21mm, 3/4”,
7/8”
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
l 51081 Ø,RT,JL,RO 21, 22mm,
3/4”
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
l 44563 Ø,JL,RO
NO DRILL 5
7.5 15
n 44619 Ø,CM,RO
Ø,RT,JL,RO
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
15 n 41932
10.5 15
12
7.5
12
8
25
25
25
15
NO DRILL 6
8
15 n 41932
NO DRILL 6
10.5 15
NO DRILL 6
7.5 15
9/16”, 3/4”
1/2”
7
5
12 25
7.5 25
8 15
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
n 44619 Ø,CM
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL 6
7.5 15
45 n 37096
45
See Instructions
Ø,RT,CS,
FS,JL,LT
n 51050 SA
n 37096
21mm, 7/8”
NO DRILL 12
14 20 78071 –
BN,N
15 n 41932
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14 20 78071 –
BN,N
85217 –
(with
amber
bulbs)
15 25 78071 –
BN,N
NO DRILL 7.5 12 20
7
5
15/16”, 3/4” 5/8”
7
15/16”, 3/4” 5/8”
12
7.5
12
8
25
25
25
15
1/2”
l 44577 Ø,CS,FS,
7/8”
21, 22mm,
3/4”
NO DRILL 6
11 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
n 44657 HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 5
10 20
NO DRILL 5
7.5 20
NO DRILL 5
10 20
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
3/4”
See Instructions
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
21, 22mm,
3/4”
NO DRILL 6
21, 22mm,
3/4”, 7/8”
1/2”
21, 22mm,
3/4”, 7/8”
21, 22mm,
3/4”
21, 22mm,
3/4”, 7/8”
JL,LT
FS,LT,TF
n 51050 SA
21, 22mm,
3/4”, 7/8”
NO DRILL 5
10 20
l 44577 Ø,CS,FS,
l 51073 Ø,RT,CS,
21, 22mm,
3/4”
NO DRILL 5
7.5 20
n 44657 Ø,HM,SA
FS,JL,LT
Ø,@,JL
9/16”, 3/4”
JL,LT
JL,LT
6
NO DRILL 13
17 25
15 25 78071 –
11 20 n 41939 Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
12 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
FS,LT,TF
BN,N
NO DRILL 7.5 12 20
15/16”, 3/4” 5/8”
Ø,RT,JL
45 l 51072
See Instructions
1/2”
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
NO DRILL 5
FS,JL,LT
Pickup, Silverado 3500 Series 03-06
8 ft. Bed, 2 & 4 WD
9/16”, 3/4”
21mm,
3/4”,7/8”
21mm,
3/4”,7/8”
l 51073 Ø,RT,CS,
n 88001
FOOTNOTES
21mm, 7/8”
45 l 51072
See Instructions
STANDARD WIRE
Ø,JL
l 51073
n 88001
T-CONNECTOR
15 n 41932
n 51050 SA
8 ft. Bed, 2 & 4 WD
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
8
l 44564 Ø,JL
See Instructions
DRILL BITS
NO DRILL 6
l 37069 Ø
l 37094 Ø
n 88001
WRENCHES
21mm, 3/4”,
7/8”
n 37016 Ø
l 37034 Ø
6.6 ft. Bed, 2 & 4 WD
FOOTNOTES
l 33093 Ø,JL
l 37069 Ø,RO
l 44564 Ø,JL,RO
n 88001
HITCH
NUMBER
7.5 15
n 37016 Ø,RO
l 37034 Ø,RO
8 ft. Bed, 2 & 4 WD
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
NO DRILL 5
15 25 78071 –
BN,N
BN,N
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
6.6 ft. Bed, 2 & 4 WD
See Instructions
DRILL BITS
21mm,
3/4”,7/8”
l 51072 Ø,RT,JL
n 88001
WIRING
1250 lb TW 12000 lb GTW
l 51072 Ø,RT,JL
l 37034 Ø,RO
l 37069 Ø
6.6 ft. Bed, 2 & 4 WD
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
See Instructions
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
8 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
95
MODEL
CHEVROLET
CHEVROLET
MODEL
94
REESE TOWPOWER
REESE TOWPOWER
n 88001
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
NO DRILL 6
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
l 44563 Ø,JL
NO DRILL 6
10.5 15
NO DRILL 5
7.5 15
n 44619 Ø,CM
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL 6
7.5 15
n 88001
See Instructions
See Instructions
n 88001
See Instructions
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
n 37096
See Instructions
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
l 37094 Ø
15/16”, 3/4” 5/8”
7
5
7
12 25
7.5 25
12 25
l 44564 Ø,JL
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
n 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
n 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
l 44563 Ø,JL
NO DRILL 5
7.5 15
l 37034 Ø
NO DRILL 6
8
15 n 41932
NO DRILL 6
7.5 15
l 33093 Ø,JL
n 51081 Ø,RT,JL,RO 21, 22mm,
3/4”
n 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
l 44563 Ø,JL,RO
NO DRILL 5
7.5 15
l 37034 Ø,RO
n 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
n 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
l 44563 Ø,JL
NO DRILL 5
7.5 15
l 37034 Ø,RO
n 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
n 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL 6
10.5 15
l 44563 Ø,JL
NO DRILL 5
7.5 15
l 37034 Ø
9/16”, 3/4”
1/2”
15/16”, 3/4” 5/8”
7/8”
21mm, 3/4”,
7/8”
8
15 n 41932
10.5 15
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
NO DRILL 12
14 20 78071 –
BN,N
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14 20 78071 –
BN,N
5
1/2”
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
7.5 25
8 15
NO DRILL 6
8
15 n 41932
3/4”
15/16”, 3/4” 5/8”
7
10.5 15
5
1/2”
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
7.5 25
8 15
NO DRILL 6
8
15 n 41932
3/4”
15/16”, 3/4” 5/8”
7
10.5 15
l 44564 Ø,JL
5
7
7.5 25
12 25
8 15
1/2”
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
8
n 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
n 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
7
12 25
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
5
7
7.5 25
12 25
8 15
1/2”
NO DRILL 12
14
78071 –
BN,N
85217 –
with amber
bulbs
Ø,@,JL,RO 21mm, 7/8”
NO DRILL 12
14
78071 –
BN,N
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14
78071 –
BN,N
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14
74682 –
BN,N
85217 –
with amber
bulbs
74682 –
N
85217 –
(with
amber
bulbs)
12 25
n 51072 Ø,RT,JL
15/16”, 3/4” 5/8”
21mm, 7/8”
(with
amber
bulbs)
12 25
9/16”, 3/4”
15/16”, 3/4” 5/8”
Ø,@,JL
85217
12 25
9/16”, 3/4”
7/8”
21mm, 7/8”
12 25
3/4”
15/16”, 3/4” 5/8”
7
9/16”, 3/4”
HITCH
NUMBER
15
l 44564 Ø,JL
l 44564 Ø,JL
8
7.5 25
12 25
8 15
l 37069 Ø
l 37094 Ø
Pickup, Silverado 1500 LD 2007
5.8 ft. Bed, 2 & 4 WD (Classic)
NO DRILL 6
5
7
NO DRILL 5
n 51072 Ø,RT,JL
1/2”
10.5 15
l 37069 Ø
l 44564 Ø,JL
2007
9/16”, 3/4”
15 n 41932
3/4”
15/16”, 3/4” 5/8”
7
n 51072 Ø,RT,JL,RO 21mm,
3/4”,7/8”
n 51072 Ø,RT,JL
Pickup, Silverado 1500 HD
12 25
7.5 25
8 15
l 33093 Ø,JL
l 37069 Ø,RO
n 44564 Ø,JL,RO
8 ft. Bed, 2 & 4 WD
7
5
7.5 15
l 37069 Ø
l 37094 Ø
n 88001
1/2”
NO DRILL 5
n 51072 Ø,RT,JL
6.6 ft. Bed, 2 & 4 WD
9/16”, 3/4”
21mm,
3/4”,7/8”
45
Ø,@,JL
NO DRILL 7.5 12 20
15/16”, 3/4” 5/8”
l 51072 Ø,RT,JL
l 51072 Ø,RT,JL
5.8 ft. Bed, 2 & 4 WD
15 n 41932
15 n 41932
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
See Instructions
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
NO DRILL 5
l 37069 Ø
l 44564 Ø,JL
n 88001
DRILL BITS
21mm,
3/4”,7/8”
n 37016 Ø
l 37034 Ø,RO
WIRING
1250 lb TW 12000 lb GTW
l 51072 Ø,RT,JL
l 51072 Ø,RT,JL
Pickup, Silverado 1500 HD 2006
6.6 ft. Bed, 2 & 4 WD
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
See Instructions
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
5.8 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
97
MODEL
CHEVROLET
CHEVROLET
MODEL
96
REESE TOWPOWER
REESE TOWPOWER
n 51072 Ø,RT,JL,RO 21mm,
3/4”,7/8”
l 33093 Ø,JL
21mm, 3/4”,
7/8”
n 51081 Ø,RT,JL,RO 21, 22mm, NO DRILL 6
3/4”
n 37096
See Instructions
10.5 15
l 44563 Ø,JL,RO
45
7.5 15
l 37034 Ø,RO
l 37069 Ø,RO
3/4”
15/16”, 3/4” 5/8”
7
21mm,
3/4”,7/8”
NO DRILL 5
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
l 51081 Ø,RT,JL
3/4”
See Instructions
10.5 15
l 44563 Ø,JL
45
7.5 15
l 37034
l 37069 Ø
21mm,
3/4”,7/8”
NO DRILL 5
l 44564 Ø,JL
8 ft. Bed, 2 & 4 WD (Classic)
5
15/16”, 3/4” 5/8”
7
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
8
15 n 41932
1/2”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
NO DRILL 6
8
NO DRILL 6
11 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
15
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
45
45
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
n 51050 SA
21, 22mm,
3/4”, 7/8”
21, 22mm,
3/4”
21, 22mm,
3/4”, 7/8”
NO DRILL 5
10 20
NO DRILL 5
7.5 20
NO DRILL 5
21, 22mm,
3/4”
NO DRILL 5
FS,LT,TF
10 20
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
JL,LT
6
l 51073 Ø,RT,CS,
FS,JL,LT
21, 22mm,
3/4”
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
JL,LT
21, 22mm,
3/4”
NO DRILL 6
FS,JL,LT
21, 22mm,
3/4”
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
JL,LT
21, 22mm,
3/4”
NO DRILL 6
21, 22mm,
3/4”
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
JL,LT
21, 22mm,
3/4”
NO DRILL 6
12 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
11 20 n 41939
Ø,@,CS,
FS,LT
11 20 n 41939
Ø,@,CS,
FS,LT
FS,JL,LT
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
JL,LT
21, 22mm,
3/4”
NO DRILL 6
17 25
NO DRILL 18
18 25
Ø,@,CS,
FS,LT
11 20 n 41939 Ø,@,CS,
FS,LT
l 33093
21mm, 3/4”,
7/8”
NO DRILL 6
8
NO DRILL 6
10.5 15
l 44563 Ø,JL
NO DRILL 6
10.5 15
NO DRILL 5
7.5 15
l 44564
NO DRILL 6
8
15
NO DRILL 5
7.5 15
l 33093 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
8
15
NO DRILL 6
10.5 15
l 44563 Ø,JL
NO DRILL 6
10.5 15
NO DRILL 5
7.5 15
l 44564 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
NO DRILL 6
8
NO DRILL 5
l 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
21mm,
3/4”,7/8”
21, 22mm,
3/4”
21mm,
3/4”,7/8”
l 51072
Ø,RT,JL
l 51072 Ø,RT,JL
l 51081 Ø,RT,JL
l 51072 Ø,RT,JL
7.5 15
21mm,
3/4”,7/8”
Ø,JL
15
15
15 25 74682 –
18, 21mm
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
18, 21mm
NO DRILL 13
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
15 25 74682 –
N
BN,N
BN,N
BN,N
17 25
15 25 74682 –
n 45022 Ø,#,CS,
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
FS,LT,TF
l 51072
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
N
17 25
n 45293 Ø,#,CS,
11 20 n 41939
Ø,JL
NO DRILL 13
NO DRILL 13
FS,LT,TF
Ø,RT,JL
18, 21mm
15 25 74682 –
18, 21mm
FS,LT,TF
21, 22mm,
3/4”
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
15 25 74682 –
n 45022 Ø,#,CS,
n 45022 Ø,#,CS,
l 51073 Ø,RT,CS,
15 25 74682 –
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
FS,LT,TF
FS,JL,LT
17 25
FS,LT
FS,LT,TF
l 51073 Ø,RT,CS,
NO DRILL 13
11 20 n 41939 Ø,@,CS,
FS,LT,TF
l 51073 Ø,RT,CS,
FOOTNOTES
N
12 25
7.5 25
9/16”, 3/4”
n 44657 HM,SA
JL,LT
STANDARD WIRE
15 25 74682 –
10.5 15
10 20
See Instructions
T-CONNECTOR
N
n 45022 Ø,#,CS,
6.6 ft. Bed, 2 & 4 WD (New Body Style)
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
14 20 74682 –
FS,LT,TF
DRILL BITS
NO DRILL 12
3/4”, 7/8”
See Instructions
n 37096
n 37096
with amber
bulbs
21mm, 7/8”
n 51050 SA
JL,LT
N
Ø,@,JL
l 44577 Ø,CS,FS,
FS,JL,LT
8 ft. Bed, 2 & 4 WD (New Body Style)
WRENCHES
FOOTNOTES
85217 –
7.5 20
l 51073 Ø,RT,CS,
14 20 74682 –
NO DRILL 5
FS,JL,LT
NO DRILL 12
21, 22mm,
3/4”
FS,JL,LT
l 51073 Ø,RT,CS,
21mm, 7/8”
12 25
7.5 25
12 25
8 15
5
Ø,@,JL
10.5 15
NO DRILL 6
3/4”
15/16”, 3/4” 5/8”
7
HITCH
NUMBER
15 n 41932
l 51073 Ø,RT,CS,
n 51050 SA
Pickup, Silverado 3500 Series 2007
1/2”
9/16”, 3/4”
8
BN,N
74682 –
BN,N
74682 –
BN,N
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 37096
l 51072 Ø,RT,JL
Ø,RO
NO DRILL 6
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
7.5 15
l 37094 Ø,RO
l 44564 Ø,JL,RO
DRILL BITS
NO DRILL 5
l 51072 Ø,RT,JL
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
99
MODEL
CHEVROLET
CHEVROLET
MODEL
98
REESE TOWPOWER
REESE TOWPOWER
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
21, 22mm,
3/4”, 7/8”
NO DRILL 6
10.5 15
l 44563 Ø,JL
NO DRILL 5
7.5 15
l 44564 Ø,JL
NO DRILL 6
11 15
n 44653 Ø,CS,FS,
3/4”
7/8”
13, 21, 22mm, NO DRILL 8
3/4”, 7/8”
HM,JL,LT
GP,JL,LT
n 44653 Ø,CS,FS,
GP,JL,LT
HM,JL,LT
21, 22mm,
3/4”, 7/8”
NO DRILL 6
11 15
n 44653 Ø,CS,FS,
GP,JL,LT
n 44653 Ø,CS,FS,
GP,JL,LT
13mm, 21,
22mm, 3/4”,
7/8”
13mm, 21,
22mm, 3/4”,
7/8”
01-07
Pickup, Silverado 3500
Series, Cab & Chassis w/34 Wide Frames (Classic)
NO DRILL 8
NO DRILL 8
NO DRILL 8
8
8
Ø,@,CS,FS, 13mm, 21,
GP,JL,LT
22mm, 3/4”,
7/8”
n 45300 #,CS,FS,HM, 13, 19, 21,
JL,KH,LT
22mm, 3/4”,
7/8”
12 20 n 41942 Ø,@,CS,FS, 13mm, 21,
GP,JL,LT
22mm, 3/4”,
7/8”
n 45300 Ø,#,CS,FS, 13mm, 19mm,
HM,JL,LT 21, 22mm,
3/4”, 7/8”
12 20 n 41942 Ø,@,CS,FS, 13mm, 21,
GP,JL,LT
22mm, 3/4”,
7/8”
n 45300 #,CS,FS,HM, 13mm, 19mm,
JL,KH,LT
21, 22mm,
3/4”, 7/8”
12 20 n 41942 Ø,@,CS,FS, 13mm, 21,
GP,JL,LT
22mm, 3/4”,
7/8”
n 45300 Ø,#,CS,FS, 13mm, 19mm,
HM,JL,LT 21, 22mm,
3/4”, 7/8”
n 41936 @
3/4”
n 41938 @,CC
n 41940 @
S-10 Blazer Downsize, All Models
S-10 Blazer Downsize, 2 Dr.
S-10 Blazer Downsize, 4 Dr.
S-10 Blazer Downsize, All Models
S-10 Pickup w/Standan Box & Step
Bumper
1983
84-91
84-91
92-94
83-84
S-10 Pickup w/Rear Fascia & No
Step Bumper
Bumper, Inc. ZR2 & Highlander Pkg.
Step Bumper
S-10 Pickup w/Sportside Box &
Non-Towing Bumper
Step Bumper
S-10 Pickup All, Except Sportside Box w/
Non-Towing Bumper & Standan Box w/Rear Fascia
Step Bumper
10, 17, 18mm,
11/16”
1” hole
saw
30
n 88002
n 88002
See Instructions
n 88002
n 88002
See Instructions
n 06958 Ø,GU,
18mm, 3/4”, 7/8” –
45
45
45
45
35
n 88001
See Instructions
45 n 37042
85-93
n 88001
See Instructions
45
85-97
n 06958 Ø,GU,
18mm, 3/4”, 7/8” –
35 n 37042
n 88001
See Instructions
45
See Instructions
See Instructions
HM,RH
HM,RH
See Instructions
See Instructions
45
45
94-97
96-97
98-99
n 51105 Ø,GP
See Instructions
3.5 6 40
98-04
n 51063 CN,GP,GU
See Instructions
3.5 5 20
98-04
n 33014 Ø
n 33014 Ø
18mm
n 33014 Ø
n 33014 Ø
18mm
18mm
NO DRILL 3.5 6
NO DRILL 3.5 6
n 33053 Ø,GU
18mm
NO DRILL 3.5 6
18mm
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
12 20 n 41942
n 41936 @
–
16 25 74682 –
BN,N
15
Cab & Chassis w/34 Wide Frames (New Body Style)
98-02 n 77005
BN,N
10.5 15
n 41940 @
Prizm
74682 –
15
NO DRILL 3.5 6
NO DRILL 3.5 6
60
60
60
60
45
NO DRILL 15
3/8”, 9/16”
hole saw
18 18 60
NO DRILL 15
3/8”, 9/16”
hole saw
16 20 74682 –
16 20 74682 –
3/8”, 9/16”
hole saw
18 18 60
17/32”
12
30 74682 –
21mm, 13/16”, 9/16”
7/8”
3/4”
17/32”
15 16 35
13/16”, 7/8”
12 15 40
15 16 35
9/16”
BN,N
18 18 60
NO DRILL 15
21mm, 13/16”, 9/16”
7/8”
BN,N
18 18 60
NO DRILL 15
3/8”, 9/16”
hole saw
16 25 74682 –
12
30 74682 –
BN,N
–
BN,N
–
78013
–
–
74427
–
–
–
78058
78058
78058
–
–
–
–
–
BN
–
–
–
n 37152 CN,GU,SB 15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
n 33055 Ø
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
30
40
–
n 33053 Ø,GU
NO DRILL 3.5 6
45
74178 78058
–
n 37152 CN,GU,SB 15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
n 33055 Ø,†
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
30
40
74178 78058
–
n 33055 Ø
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
40
74178 78058
–
n 33055 Ø
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
40
–
–
–
–
–
–
–
–
–
n 33055 Ø
18mm, 3/4”,
7/8”
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
40
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
l 51197 Ø,CS,FS,
13mm, 21,
22mm, 3/4”,
7/8”
NO DRILL 6
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
NO DRILL 5
l 51197 Ø,CS,FS,
WRENCHES
FOOTNOTES
21mm,
3/4”,7/8”
APPLICATIONS GUIDE
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
l 51072 Ø,RT,JL
l 51072 Ø,RT,JL
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
101
MODEL
CHEVROLET
CHEVROLET
MODEL
100
REESE TOWPOWER
REESE TOWPOWER
Sonic, 4 Dr. Sedan, All Models
Suburban Old Body Style
2012
92-99
n 77251 Ø,GP
13mm, 3/4”
11/16”
N
74682 78058
85262
N
74180 78058
BN
45
n 44062 CN,GU
n 88001
See Instructions
45 n 37042
See Instructions
45
n 37074 HM
7/8”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
7/8”
1/2”,
9/16”
7/8”
1/2”,
9/16”
22mm, 7/8” NO DRILL
n 51012 HM
7/8”
1/2”, 9/16” 5
7 30
n 37152 –
n 51012 HM
7/8”
1/2”, 9/16” 5
7 30
n 44656 HM
n 37152 –
10 15
TW
45
See Instructions
10 15
Ø,CN,HM
900
lb
l 44668 Ø,CN,HM
n 44095 Ø,CN,HM
45
See Instructions
n 88001
30 n 45013
10 15
10 20
10 30
NO DRILL 15 n 88001
See Instructions
n 06955 Ø,FP,GP,KK 18mm, 7/8”
45 n 51152
NO DRILL 15 n 51031
Ø,HM
14, 18mm
Ø,FP,HM,KK 18mm,
1-1/8”
See Instructions
l 37041
NO DRILL 3.5
NO DRILL 4 6
n 51031 Ø,FP,HM,KK 18mm,
NO DRILL 4
1-1/8”
n 06302 AL,GP,JR
n 51102 AL,GP,JR
n 06302 AL,GP,JR
n 51102 AL,GP,JR
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
40 n 51079
1/2”
40
1/2”
40 n 51079
1/2”
40
AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
10, 15mm,
3/4”, 7/8”
1/2”
21mm, 3/4”
12 14
1/2”
30
85262 78058
N, 4-Flat
models only
10 20
10 15
10 20
74682 78058
N, Factory
7-Way models only
85262 78058
N, 4-Flat
models only
–
78013
74896 78013
85262 85217
–
22mm, 7/8”
NO DRILL 6
NO DRILL 6
n 37072 Ø,CN,HM
22mm, 7/8”
n 37152 –
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
6
NO DRILL 6
NO DRILL 3.5
NO DRILL 4 6
45
n 33021 Ø,FP,KK
l 37051 FP,JT,KK
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
n 44098 Ø,FP,
18mm, 1-1/8” NO DRILL 4
l 44569 Ø,GP,JR
n 33094 AL,JR
18mm, 3/4”
HM,KK
n 33094 AL,JR
n 44574 AL,JR
18mm, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
lb
TW
30
lb
TW
10 20
10 15
22mm, 7/8”
14, 18mm
3.5 5 40
#,TF
6
n 44574 AL,JR
AL,GP,JR
10 12
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
n 37152 –
n 33038 Ø,HM
l 33015 Ø,SD
5 25
3.5 5 40
22mm, 13/16”, 1/2”
7/8”, 3/4”
N, Factory
7-Way models only
15
15
6 15
@,CN
15
15
lb
0
1/2”
19mm
12 14
74682 78058
90
14, 18, 19mm
Ø,HM
1/2”
7.5 30
20
Ø,HM
21mm, 3/4”
10 20
n 37072 Ø,CN,HM
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
2009
NO DRILL 5
1/2”,
6
9/16”
1/2”
5
6
#,TF
0
10 15
22mm, 7/8”
10 15
10 20
10 20 n 41930
10 12
30
n 44096 HM
NO DRILL 5
NO DRILL 6
30 n 45013
22mm, 13/16”, 1/2”
7/8”, 3/4”
7
7 30
n 51041 Ø,CN,HM
22mm, 7/8”
6
@,CN
30
1/2”, 9/16” 5
45
10 20 n 41930
6
7/8”
See Instructions
6
30
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
7/8”
1/2”,
5
9/16”
7/8”
1/2”,
5
9/16”
n 51012 HM
45 n 37042
See Instructions
7
30
90
n 88001
5
BN
7/8”
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
Tahoe New Body Style w/Amber Turn Signals 03-06
7.5 30
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
–
n 37074 HM
n 37152 –
10 15
5
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
7 30
6
n 37152 –
1/2”, 9/16” 5
45
5
22mm, 7/8”
7/8”
See Instructions
10 30
n 37072 Ø,CN,HM
n 51012 HM
45 n 37042
See Instructions
6
0
45 n 37042
See Instructions
1/2”,
9/16”
1/2”
–
20
90
APPLICATIONS GUIDE
45 n 37042
See Instructions
n 37072
45
See Instructions
FOOTNOTES
74682 78058
85262
See Instructions
45 n 37042
STANDARD WIRE
–
45 n 37042
See Instructions
T-CONNECTOR
–
–
74180 78058
See Instructions
n 51041 Ø,CN,HM
Uplander All, Inc. AWD (Canada Only)
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
–
n 88001
n 88001
Tahoe New Body Style w/Amber Turn Signals 00-02
09-12
05-08
DRILL BITS
74216 78058
GU,ST
n 44656 HM
Traverse
Uplander All, Inc. AWD
WRENCHES
30
15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
3/4”
NO DRILL 3.5 5
n 88001
95-00
02-10
FOOTNOTES
n 37152 AF,CN,
35
n 88001
03-06
TrailBlazer w/ Tow Package
HITCH
NUMBER
–
20
00-02
1998 n 77015
99-04 n 77023
99-01
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
40
l 44668 Ø,CN,HM
n 44095 Ø,CN,HM
Tracker 2 & 4 Dr.
Tracker
TrailBlazer
DRILL BITS
NO DRILL 3.5 6
TW
BN
BN,N
6
6
6
20
30
20
74682 78058
–
NO DRILL 5 5
1/2”
3.5 5
25
40
78066 78113
85344 78058
BN
1/2”
3.5 5
40
1/2”
3.5 5
40
85344 78058
BN
1/2”
3.5 5
40
BN
ABBREVIATIONS
JT 2WD models only.
RH Optional 06280 draw bar required (sold separately), except for models with
ZR2 & Highrider package.
APPLICATIONS GUIDE
3/4”
18mm, 3/4”, 7/8” –
n 51041 Ø,CN,HM
Tahoe Old Body Style
1250 lb TW 12000 lb GTW
n 06958 Ø,GU,RH
n 51041 Ø,CN,HM
Suburban New Body Style w/Amber
Turn Signals
WIRING
n 44062 Ø
n 44096 HM
Suburban New Body Style w/Amber
Turn Signals
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
98-04
98-04
CLASS V
500-750 lb TW 5000-7000 lb GTW
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
S-10 Pickup w/Sportside Box &
Non-Towing Bumper
Bumper, Inc. ZR2, Highlander Pkg. & Crew Cab
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
103
MODEL
CHEVROLET
CHEVROLET
MODEL
102
REESE TOWPOWER
REESE TOWPOWER
AL,GP,JR
CHRYSLER
200 4 Dr. Sedan
200 Convertible
300 All, Except 300C
11-12 n 77254
2012 n 77254
05-07
08-10
Ø
See Instructions
Ø
See Instructions
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
n
300C All Styles
05-10
n
n
n 06129 Ø,HM,JR
300C All Styles
2011
n 06129 Ø,AE,HM,
300M
300M All, Except Special
Aspen
99-01
02-04
07-08
n 06284 HM,JR
n 06284 HM,JR
SV
10, 13, 15,
19mm, 3/4”
10, 13, 15,
19mm, 3/4”
See Instructions
NO DRILL 40
85767 78104
CH
NO DRILL 30
78042 78104
CH
NO DRILL 40
85767 78104
CH
30
30
74224 78013
74224 78013
78027 78104
–
78027 78104
85253 85262
BN,CH
–
–
74224
74224
–
–
–
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 44574 AL,JR
5
7.5 45
5
10 30
5
7.5 45
5
10 30
See Instructions
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
5
7.5 45
1/2”
3.5 5
40
1/2”
3.5 5
40
BN,CH
–
30
NO DRILL 30
30
NO DRILL 30
See Instructions
l 51067 –
7/8”
1/2”
5 7.5 30
n 33082 AI
11/16”, 3/4” 1/2”
–
7/8”
5 7.5 30
44173
n 33082
– 44173
AI
11/16”, 3/4” 1/2”
–
7/8”
–
Aspen
FOOTNOTES
CH
AL,GP,JR
10 30
–
STANDARD WIRE
78042 78104
40 n 51079
NO DRILL 30
11-12
T-CONNECTOR
BN,CH
1/2”
n
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
85773 78104
85773 78104
78040 78058
40
NO DRILL 30
n
DRILL BITS
HG
n 35365 Ø,BF,CV
n 33094 AL,JR
1/2”
n 06129 Ø,HM,JR
n
WRENCHES
74207 78013
5 7.5 30
See Instructions
5
n 06079 Ø,†,HM,JR 10, 13, 19mm, 3/4” NO DRILL 30
n 51176 Ø,†,HM,JR See Instructions
30
10, 13, 15mm,
19mm, 3/4”
06079 Ø,†,HM,JR 10, 13, 19mm,
3/4”
51176 Ø,†,HM,JR See Instructions
06129 Ø,HM,JR 10, 13, 15,
19mm, 3/4”
06129 Ø,AE,HM,SV 10, 13, 15,
19mm, 3/4”
06079 Ø,†,HM,JR 10, 13, 19mm,
3/4”
51176 Ø,†,HM,JR See Instructions
FOOTNOTES
–
n 35365 Ø,BF,CV
n 44011 Ø,BF,CV
30 n 06302
HITCH
NUMBER
78058
n 51003 BF
1/2”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
–
Van, G-Series Classic & Sport Full Size 1996
w/Lo-Mount Taillights
10, 15mm,
3/4”, 7/8”
DRILL BITS
–
5 7.5 30
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions
l 51067 –
2009
7/8”
1/2”
1/2”
1/2”
6
5
6
5
9
7.5
9
7.5
50
30
50
30
–
BN,CH
Factory
7-Way
models only
Cirrus
Concone
Concone
Concorde
Concorde
Imperial
95-00
93-97
98-01
2002
03-04
90-93
n 06977 JR
n 06354 JR,TA
See Instructions
n 06275 HM
n 06281 JR
See Instructions
13mm, 11/16”
1/2”
n 06281 JR
n 06097 –
13mm, 11/16”
1/2”
3/8”
Intrepid Canada Only
Intrepid Canada Only
Le Baron 2 Dr. Coupe, Inc. Convertible
93-97
98-04
87-95
n 06354 JR,TA
n 06355 JR
13mm, 9/16”,
11/16”
See Instructions
40
40
35
30
30
40
3/8”
–
78013
74224 78013
–
78058
BN,HG
13mm, 9/16”,
11/16”
See Instructions
40
30
40
Le Baron 4 Dr.
90-94
3/8”
40
–
78104
–
LHS
LHS
LHS
New Yorker All, Inc. Turbo
94-97
1999
00-01
86-88
n 06354 JR,TA
n 06281 JR
13mm, 9/16”,
11/16”
See Instructions
1/2”
13mm, 11/16”
1/2”
3/8”
–
74224
–
–
78013
78013
78013
78104
New Yorker FWD Sedan, Inc. Landau
88-90
n 06097 –
3/8”
40
–
78104
–
New Yorker Fifth Ave. FWD
90-93
n 06097 –
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
40
30
30
40
–
13mm, 11/16”
3/8”
40
–
78104
–
n 06097 AO
n 88002
n 06097 –
n 06281 JR
n 06097 –
See Instructions
See Instructions
78013
78013
78013
78013
78013
78104
–
BN,HG
BN,HG
–
–
BN,HG
–
BN,HG
–
–
ABBREVIATIONS
AF Hitch is ONLY rated for weight carrying at 3,500 lbs. GTW, 350 lbs. TW and DO NOT use w/weight distribution spring bars for this specific vehicle,
except for long bed trucks.
JT 2WD models only.
APPLICATIONS GUIDE
74486 78058
n 51003 BF
AL,GP,JR
1250 lb TW 12000 lb GTW
–
87-95
97-05 n 77040
WIRING
78058
n 44011 Ø,BF,CV
Venture All, Inc. AWD
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
n 35365 Ø,BF,CV
n 44011 Ø,BF,CV
Van, G-Series Full Size
CLASS V
500-750 lb TW 5000-7000 lb GTW
78-86
n 51102 AL,GP,JR
APPLICATIONS GUIDE
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
105
MODEL
CHEVROLET
- CHRYSLER
CHEVROLET - CHRYSLER
MODEL
104
REESE TOWPOWER
90-93
n 06097 –
New Yorker
Pacifica
94-96
04-08
n 06354 JR,TA
Pacifica with Factory 7-way
PT Cruiser All, Inc. GT & Turbo Models
PT Cruiser All, Inc. GT & Turbo Models
PT Cruiser Convertible
ll, Inc. GT & Turbo Models
Sebring All, Except Convertible
04-08
01-04 n 77135
05-10 n 77135
05-09 n 77135
13mm, 9/16”,
11/16”
See Instructions
40
40
l 51084 Ø,RT,JR
18, 19mm,
3/4”
NO DRILL 3.5 5
45
l 44566 Ø,JR
18, 19mm, 3/4” NO DRILL 3.5 5
45
FOOTNOTES
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
–
STANDARD WIRE
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
3/8”
CLASS V
500-750 lb TW 5000-7000 lb GTW
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
New Yorker Salon
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
78104
–
–
78013
78003 78104
–
78003
78021
78021
78021
–
78013
78013
78013
BN,CH
–
JR
15, 17mm, 3/4”
1/2”
JR
15, 17mm, 3/4”
1/2”
JR
15, 17mm, 3/4”
1/2”
30
30
30
95-00 n 77088
JR,KH
1/2”
30
–
–
BN,CH
Sebring 2 Dr. Except Convertible
01-02 n 77088
JR,KH
12, 13, 14mm,
11/16”
12, 13, 14mm,
11/16”
1/2”
30
–
–
BN,CH
Sebring 4 Dr. Only
01-06
40
–
–
BN,CH
Sebring All, Except Convertible
Sebring Convertible All Models
Town & Country Mini Van,
2 WD Long Wheelbase
07-10
1996
97-00
01-06
07-10
1990
30
–
–
–
–
74721
–
–
78058
78013
78013
78104
78058
BN,CH
Town & Country Mini Van,
2 WD Long Wheelbase
n 06977 JR
n 77171 Ø,GP,JR
n 77184 Ø,HM,JR
3/4”, 7/8”
NO DRILL 15 n 06526 GP,JR
See Instructions
n 77184 Ø,HM,JR
n 77092 GP
See Instructions
n 77171 Ø,GP,JR
3/4”, 7/8”
30
30
1/2”
15
NO DRILL 15
7/8”
n 88001
n 88001
91-95
13, 16, 17mm, 3/4”, 1/2”
9/16”, 11/16”
3/4”, 7/8”
1/2”
45 n 37042
See Instructions
See Instructions
45 n 37042
See Instructions
See Instructions
45
45
n 33046 †,JT
See Instructions
3.5 3.5 30
n 37152 JT
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
5
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
15, 17, 18,
19mm, 7/8”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4”
1/2”
5
6
40
7/16”
3.5 5
30
1/2”
5
40
1/2”
3.5 3.5 30
3.5 5 30
n 33046 †
n 37152 –
Town & Country All, Inc. 4 WD
96-00 n 77012
Ø,HM
18, 19mm
NO DRILL 30 n 06369 Ø,GP
n 88001
Town & Country All, Inc. 4 WD
01-03 n 77012
Ø,HM
18, 19mm
n 88001
Town & Country
Except Stow & Go Seats, Inc. 4 WD
04-07 n 77012
Ø,HM
18, 19mm
18, 19mm
–
–
n 88001
See Instructions
30 n 51062
–
30 n 51062
19mm, 3/4” 1/2”
See Instructions
HM
45 n 37042
See Instructions
18, 19mm
HM
45 n 37042
See Instructions
18, 19mm
30 n 51062
19mm, 3/4” 1/2”
See Instructions
HM
45 n 37042
19mm, 3/4” 1/2”
See Instructions
3.5 3.5 30
n 33045 –
45
n 37152 –
3.5 3.5 30
45
3.5 3.5 30
45
n 44006 HM
n 33045 Ø
n 37152 –
n 44006 HM
n 33045 Ø
n 37152 –
15, 17, 18, 7/16”
19mm, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
15, 17, 18,
19mm, 7/8”
7/16”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
6
5
6
6
BN,CH
BN,CH
BN,CH
BN,CH
BN,CH
–
74187 78058
BN
74658 78013
HG
85245 78013
HG
78000 78058
–
78000 78058
–
40
3.5 3.5 30
3.5 5 30
5
BN,CH
40
3.5 3.5 30
6
BN,CH
40
Town & Country
w/Stow & Go Seats, Inc. 4 WD
05-07
n 06992 Ø,HM
15mm, 18mm
–
25
n 44006 HM
n 44176 Ø
–
08-10
n 51175 Ø,HM
n 06550 Ø,GP,JR
15mm, 18mm
Town & Country
25
20
n 44586 Ø,GP,JR
13, 15mm,
18mm
NO DRILL 4
5
20
85775 78104
CH
11-12
n 51192 Ø,GP,JR
n 06550 Ø,GP,JR
13, 15mm, 18mm –
Town & Country
n 44586 Ø,GP,JR
13, 15, 18mm NO DRILL 4
5
20
85777 78104
BN, CH
n 51192 Ø,GP,JR
13, 15mm, 18mm –
3.5 3.5 30
n 33045 Ø
3.5 5
30
85245 78013
HG
45
n 37152 –
15, 17, 18, 7/16”
19mm, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
5
40
Voyager All, Inc. 4 WD
01-03 n 77012
Ø,HM
18, 19mm
n 88001
13, 15mm, 18mm –
13, 15mm, 18mm –
18, 19mm
See Instructions
–
20
20
51203
20
30 n 51062
45 n 37042
HM
19mm, 3/4” 1/2”
See Instructions
n 44006 HM
3.5 3.5 30
25
6
3.5 3.5 30
ABBREVIATIONS
JT 2WD models only.
107
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL
CHRYSLER
CHRYSLER
MODEL
106
REESE TOWPOWER
REESE TOWPOWER
DODGE
Avenger
95-00 n 77088
Avenger
Avenger
Caliber All, Except R/T
Caliber All, Except R/T & SRT-4
Caravan
08-10
11-12
2007
08-11
84-90
Caravan Short Wheelbase, 2 WD Only
Caravan Short Wheelbase, 2 & 4 WD
Caravan Short Wheelbase, 2 WD Only
JR,KH
n 77171 Ø,GP,JR
n 77254 Ø,GP,JR
n 77145 Ø,GP
n 77145 Ø,GP
3/4”, 7/8”
15/16”
15/16”
1/2”
NO DRILL 15 n 06526 GP,JR
NO DRILL 15
96-00 n 77012
96-00 n 77012
n 06080 GW,GP
n 88001
18, 19mm
Ø,HM
18, 19mm
01-03 n 77012
Ø,HM
18, 19mm
04-07 n 77012
Ø,HM
18, 19mm
NO DRILL 15
See Instructions
18, 19mm
–
–
HM
19mm, 3/4” 1/2”
3.5 3.5 30
30 n 51062
HM
19mm, 3/4” 1/2”
3.5 3.5 30
–
n 88001
See Instructions
45
91-93
n 06080 JT
See Instructions
30
91-95
n 06080 GW,GP
See Instructions
30
HM
19mm, 3/4” 1/2”
3.5 3.5 30
n 33045 –
15, 17, 18, 7/16”
19mm, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
n 44006 HM
n 33045 Ø
n 44006 HM
n 33045 Ø
n 37152 –
94-95
n 06080 JT
08-10
n 06079 Ø,†,HM,JR 19mm, 3/4”
n 51176 Ø,†,HM,JR 19mm, 3/4”
Challenger All Models
Charger All Models
11-12
06-10
Charger All Models
Dakota Pickup Inc. Extended Cab
11-12
87-94
n 06129 Ø,HM,JR
n 06128 Ø,HM,JR
15, 17, 18, 7/16”
19mm, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
15, 17, 18,
19mm, 7/8”
7/16”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
78104
78104
78104
78104
78058
BN,CH
3.5 3.5 30
5 6 40
–
78058
–
3.5 5 30
3.5 3.5 30
5 6 40
74187 78058
74187 78058
BN
74658 78013
74658 78013
HG
85245 78013
HG
78000 78058
–
74187 78058
BN
3.5 5
30
5
40
6
3.5 3.5 30
3.5 5 30
5
6
3.5 3.5 30
3.5 5 30
5
6
BN,CH
BN,CH
CH
–
BN
HG
40
40
3.5 3.5 30
See Instructions
3.5 5
30
74187 78058
BN
n 33046 †,JT
See Instructions
3.5 3.5 30
74187 78058
BN
n 37152 JT
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
5
30
74187 78058
BN
NO DRILL 30
NO DRILL 30
78040 78058
–
78040 78058
78040 78058
–
85765 78104
74182 78058
CH
See Instructions
6
40
10, 13, 19mm, 3/4” NO DRILL 40
10, 13, 19mm, 3/4” NO DRILL 35
n 06079 Ø,†,HM,JR 10, 13, 19mm, 3/4” NO DRILL 30
n 51176 Ø,†,HM,JR 19mm, 3/4”
NO DRILL 30
n 06129 Ø,HM,JR
n 06128 Ø,HM,JR
10, 13, 19mm, 3/4” NO DRILL 30
10, 13, 19mm, 3/4” NO DRILL 35
n 06250 GU
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
n 88001
FOOTNOTES
74722
85773
74705
85775
–
n 44618 –
91-95
Caravan Cargo Van
Long Wheelbase, 2 WD Only, Except LE
Challenger All Models
See Instructions
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
n 37152 –
30 n 51062
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
n 37152 JT
n 37152 –
45
See Instructions
18, 19mm
30 n 51062
45
See Instructions
18, 19mm
n 44618 –
n 33046 †,JT
30
45
See Instructions
See Instructions
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
See Instructions
n 44006 HM
Caravan Cargo Van
Long Wheelbase, 2 WD Only
Caravan Cargo Van
Short Wheelbase, 2 & 4 WD
Caravan Cargo Van
Short Wheelbase, 2 WD Only
–
30
45
See Instructions
n 33046 †,JT
n 37152 JT
GP,QS
78058
30
84-90
n 88001
Caravan
Except Stow & Go Seats, Inc. 2 & 4 WD
1/2”
–
NO DRILL 15
NO DRILL 15
n 88001
Caravan All, Inc. 2 & 4 WD
3/4”, 7/8”
WIRING
1250 lb TW 12000 lb GTW
30
n 06080 GW,GP
n 88001
91-95
91-95
CLASS V
500-750 lb TW 5000-7000 lb GTW
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
12, 13, 14mm,
11/16”
3/4”, 7/8”
CLASS III/IV
CLASS III
1/2”
40 n 51025
GU
45 n 37042
n 51025 GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
3.5 5 30
n 36047 GU
3/4”, 9/16”
1/2”
5
7
30
45
n 37152 GU
5
6
35
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
n 44102 GU
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5
30
–
BN
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
Caravan All, Except Sport
Caravan All, Inc. 2 & 4 WD
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
109
MODEL
DODGE
MODEL
DODGE
108
REESE TOWPOWER
REESE TOWPOWER
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
40 n 51025
GU
45 n 37042
n 51025 GU
Dakota Pickup
All, Inc. RT & Dakota Sport w/Step Bumper
97-99
n 06250 Ø,GU
n 88001
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
1/2”
40 n 51025
Ø,GU
45 n 37042
Dakota Pickup
00-01
n 06250 Ø,GU
n 88001
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
1/2”
40 n 51025
Ø,GU
45 n 37042
n 51025 Ø,GU
Dakota Pickup All Models
02-03
n 88001
See Instructions
Dakota Pickup All, Except Quad Cab
02-03
n 06250 Ø,GU
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
n 44102 GU
3.5 5
30
3.5 5 30
n 36047 Ø,GU
5
7
30
45
n 37152 CT,GU
5
6
35
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
n 44102 Ø,GU
3.5 5
30
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
3.5 5 30
n 36025 GU
n 36047 Ø,GU
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3/4”
1/2”
5
5
8
7
30
30
45
n 37152 CT,GU
5
6
35
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
n 44102 Ø,GU
3.5 5
30
5
5
8
7
5
5
45 n 51025
Ø,GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
n 36025 GU
n 36047 Ø,GU
40 n 51025
Ø,GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
n 36025 GU
n 37152 CT,GU
n 44102 Ø,GU
2004
n 88001
See Instructions
Dakota Pickup All, Except Quad Cab
2004
n 06250 Ø,GU
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
n 51025 Ø,GU
1/2”
40 n 51025
Ø,GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
n 36047 Ø,GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
n 36025 GU
n 37152 CT,GU
05-09
n 51138 Ø,HM
10-11
n 51138 Ø,HM
Durango
98-99
Durango
00-03
n 06960 Ø
n 06960 Ø
3/4”, 7/8”
3/4”, 7/8”
–
–
15 n 51035
15 n 51035
Durango, w/ OEM 7-Way (4-Flat Upgrade) 00-08
04-06
Durango
Ø
Ø
n 51067 –
n 51148 Ø,RT
22mm,
1-1/8”
22mm,
1-1/8”
3/4”, 7/8”
3/4”, 7/8”
7/8”
18, 21mm,
3/4”, 7/8”
Durango
Durango
Dynasty
n 88002
3/8”
40
1/2”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3/4”, 9/16” 1/2”
3/4”
1/2”
74475 78058
BN,HJ
30
30
74475 78058
BN,HJ
8
6
30
35
74475 78058
BN,HJ
3.5 5
30
5
7
30
5
8
30
35
74187 78058
BN,HJ
20
74187 78058
BN,HJ
20
74187 78058
BN,HJ
74658 78013
–
74658 78013
BN,HG
85253 78058
78027 78104
BN,N
78027 78104
BN,CH
78027 78104
BN,CH
85775 78104
–
78058
CH
NO DRILL 5
8 20
n 33092 Ø,HM
22mm, 1-1/8” NO DRILL 5
n 33056 Ø
n 44064 Ø
3/4”
n 33056 Ø
n 44064 Ø
3/4”
NO DRILL 5 7.5 30
NO DRILL 3.5 5 20
NO DRILL 5 7.5 30
3/4”, 7/8”
NO DRILL 3.5 5
n 33082 AI
11/16”, 3/4” 1/2”
– 44173
7/8”
NO DRILL 3.5 5
NO DRILL 3.5 5
15
15
5 7.5 30
NO DRILL 6 9 20
1/2”
n 51067 –
7/8”
1/2”
5 7.5 30
n 51067 –
7/8”
1/2”
5 7.5 30
2009
13mm, 9/16”,
11/16”
See Instructions
3/4”
BN,HJ
n 33092 Ø,HM
–
n 33082 AI
n 06097 –
1/2”
74475 78058
8 20
07-08
11-12
88-93
3/4”, 9/16”
BN,HJ
NO DRILL 5
l 44175 Ø
Durango
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3/4”
1/2”
74475 78058
15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
18mm, 1/2”, 1/2”
3.5 5
5/8”, 11/16”,
3/4”, 7/8”
22mm, 1-1/8” NO DRILL 5 8
n 44102 Ø,GU
1/2”
– 44173
n 33082
– 44173
l 44662
–
AI
–
Ø,CS,HM
3/4”, 7/8”
1/2”
6
5
18, 21mm
NO DRILL 6
deep socket,
3/4”, 7/8”
11/16”, 3/4” 1/2”
6
5
11/16”, 3/4” 1/2”
6
7/8”
1/2”
5
21mm
NO DRILL 6
7/8”
1/2”
FOOTNOTES
3.5 5 30
STANDARD WIRE
35
T-CONNECTOR
6
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3/4”, 9/16” 1/2”
DRILL BITS
n 37152 GU
WRENCHES
45
FOOTNOTES
30
HITCH
NUMBER
7
3/4”, 9/16”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
5
DRILL BITS
1/2”
WRENCHES
3/4”, 9/16”
FOOTNOTES
n 36047 GU
DRILL BITS
3.5 5 30
8
30
20
9 50
7.5 30
9
20
9
7.5
9
7.5
7.5
50
30
50
30
20
BN,CH
–
ABBREVIATIONS
equipped with 15" tires or full-size spare.
JT 2WD models only.
QS Hitch rated at 2500 lb GTW, 200 lb TW.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 51025 Ø,GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
See Instructions
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
1/2”
WIRING
1250 lb TW 12000 lb GTW
STYLE
n 88001
WRENCHES
FOOTNOTES
HITCH
NUMBER
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 06250 GU
CLASS V
500-750 lb TW 5000-7000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
95-96
STYLE
YEAR
MODEL
Dakota Pickup
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
111
MODEL
DODGE
MODEL
DODGE
110
REESE TOWPOWER
REESE TOWPOWER
n 88001
Grand Caravan Long Wheelbase, 2 WD Only 91-93
Grand Caravan
Long Wheelbase, 2 WD Only, Except LE
See Instructions
n 06080 JT
96-00 n 77012
Ø,HM
18, 19mm
45
n 37152 JT
5
30
n 33046 †,JT
n 37152 JT
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
45
See Instructions
n 33046 †,JT
Grand Caravan All, Inc. 4 WD
01-03 n 77012
Ø,HM
18, 19mm
n 88001
Grand Caravan
Except Stow & Go Seats, Inc. 4 WD
04-07 n 77012
Ø,HM
18, 19mm
–
n 88001
See Instructions
30 n 51062
–
30 n 51062
05-07
n 06992 Ø,HM
15mm, 18mm
–
25
–
08-10
n 51175 Ø,HM
n 06550 Ø,GP,JR
15mm, 18mm
Grand Caravan
13, 15, 18mm
–
25
20
–
11-12
n 51192 Ø,GP,JR
n 06550 Ø,GP,JR
13, 15, 18mm
Grand Caravan All Styles
13, 15, 18mm
–
n 51192 Ø,GP,JR
n 06354 JR,TA
13, 15, 18mm
–
n 06355 JR
13mm, 3/4”
1/2”
Intrepid
Intrepid
Journey
Journey
Journey
Magnum All Models
93-97
98-04
2009
2010
11-12
05-08
n 06079 Ø,HM,JR
n 51176 Ø,HM,JR
n 06129 Ø,HM,JR
Mini-Ram
84-88
Neon 2 & 4 Dr.
Neon 2 & 4 Dr.
Neon All Inc. R/T
Nitro
Nitro
Pickup D/W Series, Full Size
95-99 n 77121
00-01 n 77052
02-05 n 77052
2007
08-10
67-70
n 06080 GW,GP
–
See Instructions
GP,JR
7/8”
1/2”
GP,JR
7/8”
1/2”
HM
3.5 3.5 30
n 33045 –
45
n 37152 –
19mm, 3/4” 1/2”
3.5 3.5 30
45
See Instructions
HM
45 n 37042
Grand Caravan
w/Stow & Go Seats, Inc. 4 WD
19mm, 3/4” 1/2”
See Instructions
45 n 37042
See Instructions
18, 19mm
HM
45 n 37042
See Instructions
18, 19mm
30 n 51062
19mm, 3/4” 1/2”
3.5 3.5 30
45
See Instructions
n 44006 HM
n 33045 Ø
n 37152
n 44006 HM
n 33045 Ø
n 37152
n 44006 HM
n 44176 Ø
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
15, 17, 18,
19mm, 7/8”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4”
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
74187 78058
BN
3.5 3.5 30
74187 78058
BN
74658 78013
HG
85245 78013
HG
78000 78058
–
78000 78058
–
6
30
7/16”
3.5 5
30
1/2”
5
30
1/2”
3.5 3.5 30
3.5 5 30
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
FOOTNOTES
3.5 3.5 30
5 6 30
30
5
7/16”
HITCH
NUMBER
–
1/2”
15, 17, 18, 7/16”
19mm, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
15, 17, 18,
19mm, 7/8”
78058
6
5
6
6
–
30
3.5 3.5 30
3.5 5 30
5
6
40
3.5 3.5 30
25
51203
n 44586 Ø,GP,JR
13, 15mm,
18mm
NO DRILL 4
5
20
85775 78104
CH
20
20 n 37042
n 44586 Ø,GP,JR
13, 15mm,
18mm
NO DRILL 4
5
20
85758 –
BN,CH
N/A
74224
78086
85717
–
78039
78013
–
–
–
–
78104
–
–
78058
–
78058
78058
78058
78104
78104
–
–
20
40
30
10, 13, 19mm,
3/4”
NO DRILL 30
10, 13, 19mm,
3/4”
NO DRILL 30
51203
n 44601 Ø,HM,JR
n 44601 Ø,HM,JR
3/4”
3/4”
NO DRILL 4
NO DRILL 4
n 44601 Ø,HM,JR
3/4”
NO DRILL 4
4
4
4
25
25
25
BN,HG
CH
–
–
BN,CH
30
n 33046 †,JT
30
3.5 3.5 30
See Instructions
30
20
20
n 51089 Ø,GP
n 51089 Ø,GP
18, 19mm
18, 19mm
NO DRILL 5
NO DRILL 5
n 51016 HM
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 51017 GP
6 20
6 20
10 40
10 40
n 44559 Ø,GP
n 44559 Ø,GP
18, 19mm
18, 19mm
NO DRILL 5
NO DRILL 5
n 36025 –
3/4”
1/2”
5
6
6
8
20
20
30 n 41902
@,DB
3/4”, 13/16”, 9/16”
7/8”
–
–
–
78017
78017
10 12 40 –
–
–
BN,CH
CH
–
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001
–
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
3.5 3.5 30
30 n 37042
18, 19mm
DRILL BITS
See Instructions
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
WIRING
1250 lb TW 12000 lb GTW
n 33046 †,JT
45
See Instructions
n 37152 JT
Grand Caravan All, Inc. 4 WD
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
30 n 37042
n 06080 JT
94-95
INSTALL TIME
STYLE
DRILL BITS
n 06080 GW,GP,JT
84-90
CLASS V
500-750 lb TW 5000-7000 lb GTW
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Grand Caravan
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
113
MODEL
DODGE
MODEL
DODGE
112
REESE TOWPOWER
REESE TOWPOWER
n 51017 GP
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
l 37034 GU
15/16”, 3/4” 5/8”
7
12 25 n 45005
l 37069 GU
l 37094 GU
9/16”, 3/4”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5
7
6
7.5 25
12 25
10 25
1/2”
6
10 25
1/2”
5
8 30
10 45
n 51017 GP
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 36025 FP,GU
3/4”
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 25 n 45005
l 37069 GU
l 37094 GU
9/16”, 3/4”
n 44108 FP,GU,
1/2”
7.5 25
12 25
10 25
1/2”
6
10 25
n 36025 –
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
5
7
6
1/2”
5
8
10 40
n 36025 FP,GU
3/4”
1/2”
7.5 12 30 n 41902
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 25 n 45005
l 37069 GU
l 37094 GU
9/16”, 3/4”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5
7
6
7.5 25
12 25
10 25
1/2”
6
10 25
1/2”
5
8 30
10 45
n 44109 FP,GP,
GU,HX
82-85
86-93
n 88001
n 88001
See Instructions
See Instructions
45
45 n 51016
HM
n 51017 GP
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
HM,HX
n 44109 FP,GP,
GU,HX
Pickup
D/W Series, Full Size w/Deep Drop Bumper
Pickup Ram, Full Size
n 36025 –
n 37081 CQ
86-93
1994
n 88001
See Instructions
45 n 37096
n 51016 HM,FP
n 51017 GP,FP
n 51039 –
See Instructions
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
5
See Instructions
–
12 14 45
@,DB
3/4”, 13/16”, 9/16”
7/8”
10 12 40 74182 –
#,HX,TF
3/4”, 15/16”
12 14 45
1/2”, 3/8”,
5/8”
FOOTNOTES
STANDARD WIRE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
T-CONNECTOR
–
3/4”, 15/16”
1/2”
5
7.5 40 n 45005
#,HX,TF
10 40
n 37094 GU
15/16”, 3/4” 5/8”
7
12 40
10 15
n 44103 GU
n 44108 Ø,FP,GU,
7/8”
5
10 20
10 25
1/2”, 3/8”,
5/8”
3/4”, 13/16”, 9/16”
7/8”
3/4”, 15/16” 1/2”, 3/8”,
5/8”
BN,HJ
74182 –
BN,HJ
12 14 35 74182 –
BN,HJ
12 14 45
10 25
74182 –
BN,HJ
12 14 35 74475 –
BN,HJ
10 45
45
l 37034 GU
15/16”, 3/4” 5/8”
7
12 40 n 41923
@,SA
#,HX,TF
7/8”
1/2”
5
10 15
l 37069 GU
9/16”, 3/4”
1/2”
5
7.5 40 n 45005
n 51016 HM,FP
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
l 37094
15/16”, 3/4” 5/8”
7
12 40
10 40
n 44103 GU
7/8”
1/2”
5
10 20
n 44108 Ø,FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
1/2”
6
10 25
1/2”
6
10 25
GU,HX
–
#,HX,TF
9/16”, 3/4”
n 44109 Ø,FP,GP,
–
10 12 40 –
l 37069 GU
1/2”
–
3/4”, 13/16”, 9/16”
7/8”
10 40
18mm, 3/4” 1/2”
6
deep socket
18mm, 3/4” 1/2”
6
deep socket
13, 18, 19mm, NO DRILL 5
7/8”
–
@,DB
@,SA
HM,HX
12 14 45
1/2”, 3/8”,
5/8”
–
30
n 51039 –
n 51017 GP,FP
3/4”, 15/16”
12 40 n 41923
n 37081 CQ
45 n 37096
13, 18, 19mm, NO DRILL 5
7/8”
#,HX,TF
7
1994
See Instructions
1/2”
15/16”, 3/4” 5/8”
10 12 40 –
15/16”, 3/4” 5/8”
GU,HX
n 88001
1/2”
15/16”, 3/4” 5/8”
7.5 12 30 n 41902
3/4”, 13/16”, 9/16”
7/8”
l 37034 GU
HM,HX
95-98
1/2”
@,DB
45
n 44109 Ø,FP,GP,
Pickup, Ram
Full Size w/Deep Drop Bumper
Pickup, Ram Full Size
13, 18, 19mm, NO DRILL 5
7/8”
10 40
HM,HX
1/2”
15/16”, 3/4” 5/8”
7.5 12 30 n 41902
3/4”, 13/16”, 9/16”
7/8”
3/4”, 15/16” 1/2”, 3/8”,
5/8”
12 14 45
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 36025 –
n 37081 CQ
71-85
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
HITCH
NUMBER
10 40
GU,HX
n 51016 HM
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
3/4”
n 44109 FP,GP,
73-85
DRILL BITS
n 36025 FP,GU
1/2”
WIRING
1250 lb TW 12000 lb GTW
10 40
HM,HX
Pickup
D/W Series, Full Size w/Deep Drop Bumper
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 51016 HM
71-72
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
115
MODEL
DODGE
MODEL
DODGE
114
REESE TOWPOWER
REESE TOWPOWER
Pickup, Ram
Full Size 1500, Except Mega Cab & SRT-10
APPLICATIONS GUIDE
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
15/16”, 3/4” 5/8”
1/2”
7
5
12 40 n 45010
7.5 40
10 40
l 37094 See Instuctions 15/16”, 3/4” 5/8”
7
12 40
n 44103 GU
n 37081 CQ
7/8”
5
10 20
10 40
n 37017 †,GU
3/4”
10 15
10 40
l 37034 GU
l 37069 GU
15/16”, 3/4” 5/8”
1/2”
7
5
12 40 n 45010
7.5 40
10 40
7
12 40
n 44103 GU
7/8”
5
10 20
n 37081 CQ
13, 18, 19mm, NO DRILL 5
7/8”
10 45
n 37017 †,GU
3/4”
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 40 n 45010
10 40
l 37069 GU
9/16”, 3/4”
5
7.5 40
10 15
n 44103 GU
7/8”
1/2”
2002
n 37081 CQ
7
5
13, 18, 19mm, NO DRILL 5
12 40
10 20
10 45
74475 78058
BN,HJ
02-03
n 37084 Ø,CP,DS,GU 7/8”, 15/16” NO DRILL 5
10 20
–
78058
–
– 33072
NO DRILL 5
8
20 n 41929
@,DY,KL,SG 3/4”, 13/16”,
1/2”
12 15 35 –
78058
–
NO DRILL 6
10 25 n 45288
#,DY,KL,SB 3/4”, 13/16”,
1/2”
12 14 35
3/4”, 13/16”,
15/16”
25 n 45288 #,KL,SB 3/4”, 13/16”,
15/16”
20 n 45299 #,AA,CS,FS, 16, 18, 21mm,
GH,HM,LT, 3/8”
20 n 41929 @,KL,SG 3/4”, 13/16”,
15/16”
25 n 45288 #,KL,SB 3/4”, 13/16”,
15/16”
20 n 45299 #,AA,CS,FS, 16, 18, 21mm,
GH,HM,LT, 3/8”
20 n 41929 @,KL,SG 3/4”, 13/16”,
15/16”
1/2”
12 15 35 –
78058
–
1/2”
12 14 35
9/16”
18 18 35
1/2”
12 15 35 –
78058
–
1/2”
12 14 35
9/16”
18 18 35
1/2”
12 15 35 –
78058
–
78058
–
45
See Instructions
5
7/8”
1/2”
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
99-01
2002
n 88001
See Instructions
45 n 37096
45
See Instructions
5
7/8”
1/2”
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
2002
2002
n 37096
See Instructions
n 51016 HM,FP
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
7/8”
n 51039 –
Pickup, Ram
Full Size 1500, Except Daytona, Hemi Sport Quad
Cab, Ram Rumble Bee & SRT-10
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
l 37034 GU
l 37069 GU
45 n 37096
n 51017 GP,FP
Pickup, Ram Full Size 3500 HD
DRILL BITS
10 15
10 40
See Instructions
n 51017 GP,FP
Pickup, Ram Full Size 2500 HD
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
3/4”
n 88001
2003
03-05
03-05
04-05
06-08
– 51143
– 51143
– 51143
– 51143
– 51143
45
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
5
Ø,CP,DS,GU 3/4”, 15/16” NO DRILL
Ø,CP,GU
Ø,CP,GU
Ø,CP,GU
Ø,CP,GU
5
3/4”, 15/16” NO DRILL 5
3/4”, 15/16” NO DRILL 5
3/4”, 15/16” NO DRILL 5
3/4”, 15/16” NO DRILL 5
8 20
8 20
8 20
8 20
8 20
1/2”
7.5 12 30 n 41923
13, 18, 19mm, NO DRILL 5
7/8”
9/16”, 3/4”
1/2”
1/2”
1/2”
1/2”
7.5 12 30 n 41923
7.5 12 30 n 41923
7/8”
Ø,CP,DS,GU 3/4”, 15/16”
l 44536 Ø,CP,DY
3/4”, 7/8”
n 44603 Ø,CP,DS
3/4”, 1-1/8” NO DRILL 6
10 20
– 33072
3/4”, 15/16” NO DRILL 5
8
Ø,CP,GU
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL 6
10
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL 6
10
– 33072
3/4”, 15/16” NO DRILL 5
8
Ø,CP,GU
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL 6
10
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL 6
10
– 33072
3/4”, 15/16” NO DRILL 5
8
Ø,CP,GU
BN,HJ
20 n 41929
@,SA
#,TF
@,SA
#,TF
3/4”, 13/16”, 9/16”
7/8”
3/4”
1/2”
12 14 35 74475 –
BN,HJ
3/4”, 13/16”, 9/16”
7/8”
3/4”
1/2”
12 14 45
74475 –
BN,HJ
12 14 34 74475 –
BN,HJ
12 14 45
74475 –
BN,HJ
BN,HJ
@,SA
3/4”, 13/16”, 9/16”
7/8”
12 14 35 74475 –
#,TF
3/4”
12 14 30
15/16”
15/16”
@,KL,SG
1/2”
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL 6
10 25 n 45288
#,KL,SB
3/4”, 13/16”, 1/2”
15/16”
12 14 35
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL 6
3/4”, 15/16” NO DRILL 5
10 20
8 20 n 45288
#,KL,SB
3/4”, 13/16”, 1/2”
15/16”
12 14 35 –
– 33072
Ø,CP,GU
l 44536 Ø,CP
n 44603 Ø,CP
9/16”, 3/4”
1/2”
74475 –
10 45
3/4”, 7/8”
NO DRILL 6
3/4”, 1-1/8” NO DRILL 6
10 25
10 20
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
n 37017 †,GU
99-01
n 51039 –
n 51016 HM,FP
Pickup, Ram
Full Size 3500 Only, w/Deep Drop Bumper
Pickup, Ram
Full Size 1500 Only Built Before 11/2002
Pickup, Ram
Full Size 1500 Built After 11/2002
1250 lb TW 12000 lb GTW
13, 18, 19mm, NO DRILL 5
7/8”
n 51017 GP,FP
Pickup, Ram
Full Size 2500 Only, w/Deep Drop Bumper
Pickup, Ram
Full Size 3500 Only
WIRING
n 37081 CQ
95-98
n 51039 –
n 51016 HM,FP
Pickup, Ram
Pickup, Ram Full Size 2500 Only
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup, Ram
Pickup, Ram Full Size
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
117
MODEL
DODGE
MODEL
DODGE
116
REESE TOWPOWER
REESE TOWPOWER
– 33072
l 44536 Ø,CP
n 44603 Ø,CP
Pickup, Ram
Full Size 2500 HD, Except Mega Cab
Pickup, Ram
Full Size 2500 HD, Inc. Mega Cab
Pickup, Ram
Full Size 3500 HD Chassis Cab
Pickup, Ram
3/4”, 7/8”
NO DRILL 6
3/4”, 1-1/8” NO DRILL 6
8
n 45288 #,KL,SB
– 51143
Ø,CP,GU
3/4”, 15/16” NO DRILL 5
8 20
– 33072
Ø,CP,GU
3/4”, 15/16” NO DRILL 5
l 44536 Ø,CP
3/4”, 7/8”
n 44603
3/4”, 1-1/8” NO DRILL 6
Ø,CP
NO DRILL 6
8
20 n 41929
10 25 n 45299
@,KL,SG
Ø,CP,GU
3/4”, 15/16” NO DRILL 5
8 20
– 33072
Ø,CP,GU
3/4”, 15/16” NO DRILL 5
l 44536 Ø,CP
3/4”, 7/8”
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL 6
NO DRILL 6
8
20 n 41929
10 25 n 45299
@,KL,SG
09-12
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
–
3/4”, 13/16”, 1/2”
15/16”
12 15 35 –
–
–
18 18 95
3/4”, 13/16”, 1/2”
15/16”
12 14 35 –
–
–
3/4”, 13/16”, 1/2”
15/16”
12 15 35 –
78058
–
78058
–
78058
–
–
–
18 18 95
n 41940 @
21mm, 13/16”, 9/16”
7/8”
3/4”
17/32”
15 16 35
21mm, 13/16”, 9/16”
7/8”
3/4”
17/32”
15 16 35
@
n 41940 @
3/4”, 1-1/8” NO DRILL 6
78058
3/4”
n 41936 @
08-10
n 44603 Ø,CP
12 14 35 –
n 41936 @
n 41936
08-10
2009
3/4”, 13/16”, 1/2”
15/16”
10 20
07-10
–
#,AA,CS,FS, 16, 18, 21mm, 9/16”
GH,HM,LT, 3/8”
n 41940 @
Pickup, Ram
78058
#,AA,CS,FS, 16, 18, 21mm, 9/16”
GH,HM,LT, 3/8”
n 45288 #,KL,SB
– 51143
12 15 35 –
10 20
06-09
06-09
3/4”, 13/16”, 1/2”
15/16”
10 25
10 20
06-09
06-09
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
@,KL,SG
DRILL BITS
20 n 41929
WRENCHES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
3/4”, 15/16” NO DRILL 5
17/32”
21mm, 13/16”, 9/16”
7/8”
12
12
12
30 –
30 –
30 –
15 16 35
10 20
Pickup, Ram
10-11
n 45288 #,KL,SB
Pickup, Ram
10-11
n 41929 @,KL,SG
74682 78058
85262
Factory
7-Way
models only
78071
Fifth Wheel
models only
3/4”, 13/16”, 1/2”
15/16”
12 14 35 74682 78058
85262
Factory
7-Way
models only
3/4”, 13/16”, 1/2”
15/16”
12 15 35 –
–
–
n 45299 #,AA,CS,FS, 16, 18, 21mm, 9/16”
GH,HM,LT, 3/8”
18 18 95 74682 78058
85262
Factory
7-Way
models only
Pickup, Ram
10-11
n 45288 #,KL,SB
3/4”, 13/16”, 1/2”
15/16”
12 14 35 74682 78058
85262
Factory
7-Way
models only
Pickup, Ram
10-11
n 41929 @,KL,SG
3/4”, 13/16”, 1/2”
15/16”
12 15 35 74682 78058
85262
Factory
7-Way
models only
n 45299 #,AA,CS,FS, 16, 18, 21mm, 9/16”
GH,HM,LT, 3/8”
18 18 95
10-12
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL 6
10 20
74682 78058
85262
Factory
7-Way
models only
Ramcharger
w/Deep Drop Bumper, Except w/Skid Shield
Ramcharger
74-85
n 37081 M,TH
13, 18, 19mm, NO DRILL 5
7/8”
10 45
–
78058
–
6
–
78058
–
Ramcharger
Ramcharger
86-88
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
13, 18, 19mm, NO DRILL 5
7/8”
10 45
74182 78058
BN
86-93
n 88001
See Instructions
5
6
74182 78508
BN
Spirit
89-95
n 06097 –
13mm, 9/16”,
11/16”
–
78104
–
Sprinter All 41 Wide Frames, Except 118
Wheelbase & Factory Metal Step Platform
Sprinter 144 & 170 Wheelbase Models
Only, Except w/Factory Step Bumper
Sprinter w/Factory Step Bumper
03-06
n 33089 Ø
18mm, 3/4”
NO DRILL 5
7.5 20
–
78104
–
2007
n 44576 Ø,HM
18, 19mm
NO DRILL 6
7.5 20
–
–
–
2007
08-09
n 44576 Ø,HM
n 44576 Ø,HM
18, 19mm
NO DRILL 5
NO DRILL 6
7.5 30
7.5 20
–
–
–
–
–
82-85
n 88001
See Instructions
3/8”
45 n 37042
See Instructions
45
n 37152 –
n 37042
See Instructions
45
n 37081 M,TH
45 n 37042
See Instructions
45
n 37152 –
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
30
30
40
18, 19mm
–
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Pickup, Ram
Pickup, Ram
WRENCHES
FOOTNOTES
Ø,CP,GU
FOOTNOTES
8 20
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
3/4”, 15/16” NO DRILL 5
WIRING
1250 lb TW 12000 lb GTW
HITCH
NUMBER
Ø,CP,GU
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
– 51143
06-08
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup, Ram
Full Size 1500, Inc. Mega Cab
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
119
MODEL
DODGE
MODEL
DODGE
118
REESE TOWPOWER
REESE TOWPOWER
JR,KH
12mm, 13mm,
14mm, 11/16”
1/2”
13, 16, 17mm, 3/4”, 1/2”
9/16”, 11/16”
n 06977 JR
13, 16, 17mm, 3/4”, 1/2”
9/16”, 11/16”
n 51037 Ø,DG
1993
n 51037 Ø,DH
Van, B-Series Full Size
94-97
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
10 30
n 44094 Ø,BF,DG
n 06962 Ø,DH
3/4”, 7/8”
NO DRILL 15 n 51037 Ø,DH
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
NO DRILL 5
10 30
n 44094 Ø,BF,DG
NO DRILL 5
10 30
n 44094 Ø,BF
NO DRILL 5
10 30
n 44094 Ø,BF
NO DRILL 5
10 30
n 33009 Ø,BF
n 44094 Ø,BF
n 06962 Ø,BF
1998
3/4”, 7/8”
NO DRILL 15 n 51037 Ø
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
10 30
n 33009 Ø,BF
n 37070 Ø,BF
n 44094 Ø
n 06962 Ø,BF
99-00
3/4”, 7/8”
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
10 30
n 33009 Ø,BF
n 37070 Ø,BF
n 44094 Ø
01-03
EAGLE
Vision
FIAT
500 All, Inc. 500c (Cabrio)
FORD
Aerostar Van Extended Body
n 06962 Ø,BF
n 06354 JR,TA
93-97
2012 n 77255
Ø,GP,JR
7/8”, M8, M13
3/4”, 7/8”
See Instructions
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
3/4”, 7/8”
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
10 30
3/4”, 7/8”
–
–
78013
–
–
78058
–
5/8”, 11/16”, NO DRILL 10
3/4”, 7/8”
12 35 –
78058
–
5/8”, 11/16”, NO DRILL 10
3/4”, 7/8”
5/8”, 11/16”, NO DRILL 10
3/4”, 7/8”
5/8”, 11/16”, NO DRILL 10
3/4”, 7/8”
12 35 –
78058
–
12 35 74430 78058
BN
12 35 74430 78058
BN
Ø,@
5/8”, 11/16”, NO DRILL 10
3/4”, 7/8”
12 35 74430 78058
BN
Ø,@
5/8”, 11/16”, NO DRILL 10
3/4”, 7/8”
12 35 74888 78058
BN
n 41910 Ø,@
5/8”, 11/16”, NO DRILL 10
3/4”, 7/8”
12 35 85253 78058
BN,N
85253 78058
BN,N
–
–
NO DRILL 5
10 30 n 41910
Ø,@,DH
NO DRILL 5
10 30 n 41910
Ø,@,DH
NO DRILL 5
7.5 20 n 41910
Ø,@,DH
NO DRILL 5
NO DRILL 6
10 45
10 25
10 30
NO DRILL 6
3/4”, 7/8”
NO DRILL 6
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
7.5 20 n 41910
7.5 20 n 41910
10 25
10 30
3/4”, 7/8”
NO DRILL 5
7.5 20
n 37070 Ø,BF
n 44094 Ø
3/4”, 7/8”
NO DRILL 6
10 25
10 30
NO DRILL 30
n 06033 J,GP
See Instructions
30 n 37042
86-96
n 88001
n 06033 GP,HC
See Instructions
Aerostar Van Standand Body
See Instructions
45
30
Aerostar Van Extended Body
1997
n 06033 J,GP
See Instructions
30 n 37042
1997
n 88001
n 06033 GP,HC
See Instructions
Aerostar Van Standand Body
45
30
Bronco Full Size
78-79
See Instructions
See Instructions
See Instructions
45
45
85769 78104
BN,CH
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
5
6
40
–
78013
–
n 44615 †,J
See Instructions
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
3.5 6
40
–
78013
–
5
6
40
74665 78058
BN
See Instructions
3/4”
3.5 6
40
74665 78058
BN
–
78058
–
–
78058
–
n 37152 –
n 44615 †,J
n 36025 FP
n 44108 FP,GU,
HM,HX
GU,HX
–
n 37152 –
n 44109 FP,GP,
78-79
–
10 25
10 30
n 33009 Ø,BF
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
FOOTNOTES
–
10 30
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
3/4”, 7/8” NO DRILL 5
STANDARD WIRE
–
NO DRILL 5
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
3/4”, 7/8” NO DRILL 5
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
–
10 30
40
86-96
Bronco Full Size w/Deep Drop Bumper
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
5/8”, 11/16”, NO DRILL 5
3/4”, 7/8”
n 36072 Ø,†,BF,DV 3/4”
n 37070 Ø,BF
3/4”, 7/8”
Van, Ram Full Size
–
78013
n 36025 –
n 37081 M
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
7.5 12 30
6 10 45
1/2”
6
10 45
1/2”
5
8 30
10 45
1/2”
13, 18, 19mm, NO DRILL 5
7/8”
ABBREVIATIONS
DS Use #33072 on 1500 models built after 11/1/02. Use #37084 on 1500 models built before 11/1/02.
DY Use on 1500 models built after 11/1/02.
GH Will not fit models with 34" wide frames.
GO Requires hitch with packaging date code 2/15/94 or later.
GX Requires fabrication of "L" bracket to reposition exhaust on '95 and later 6 ft. box models.
JT 2WD models only.
SG Hitches produced before 09/10/07 are rated at 1000/10000 WC & 1200/12000 WD.
APPLICATIONS GUIDE
01-03
–
–
7.5 30
n 41910 Ø,@
n 51037 Ø,DG
Van, Ram All, Except 109.3 Wheelbase
NO DRILL 5
40
86-92
Van, Ram Full Size
1250 lb TW 12000 lb GTW
30
DRILL BITS
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
18, 19mm
WIRING
40
n 51037 Ø,DG
APPLICATIONS GUIDE
WRENCHES
FOOTNOTES
78-85
HITCH
NUMBER
INSTALL TIME
STYLE
71-77
n 44591 Ø,HM
n 06977 JR
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
01-06
FOOTNOTES
Stratus 4 Dr. Only
INSTALL TIME
STYLE
01-02 n 77088
DRILL BITS
Stratus 2 Dr. Only
WRENCHES
08-09
95-00
FOOTNOTES
HITCH
NUMBER
YEAR
STYLE
MODEL
Stratus 4 Dr. Only
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
121
MODEL - FORD
DODGE
DODGEMODEL
- FORD
120
REESE TOWPOWER
REESE TOWPOWER
HM,HX
n 44109 FP,GP,
GU,HX
80-86
Bronco Full Size
82-86
n 36025 –
n 37081 M
n 88001
See Instructions
45 n 37042
45
See Instructions
n 36025 FP
n 37152 –
n 44108 FP,GU,
HM,HX
n 44109 FP,GP,
Bronco Full Size
n 88001
87-91
See Instructions
45
n 37152 –
n 44108 FP,GU,
HM,HX
n 44109 FP,GP,
GU,HX
Bronco Full Size
n 88001
92-93
See Instructions
n 36025 –
n 36025 FP
45
n 37152 –
n 44108 FP,GU,
HM,HX
n 44109 FP,GP,
GU,HX
Bronco Full Size
n 88001
94-96
See Instructions
n 36025 –
n 36025 FP
45
n 37152 –
n 44108 FP,GU,
HM,HX
n 44109 FP,GP,
GU,HX
n 36025
n 37152 –
–
Bronco II
84-90
Contour All, Except SVT
Crown Victoria / LTD
Crown Victoria / LTD
E-100 Econoline Van
Full Size, All Models
95-00 n 77009
92-97
98-07
75-83
n 88001
–
13mm, 3/4”
1/2”
See Instructions
45 n 37042
45
See Instructions
75-91
n 88002
See Instructions
45 n 51007 HM,HX,
O,PA,T
3/4”, 7/8”
1/2”
E-150 Econoline Van
92-94
95-96
7.5 12 30
6 10 45
1/2”
6
10 45
1/2”
5
8
5
10 30
n 88002
See Instructions
45 n 51007
HM,HX,
O,PA,T
3/4”, 7/8”
1/2”
5
10 30
n 06127 Ø,EF,HM
See Instructions
20 n 51007
n 88002
See Instructions
45 l 37041
n 06127 Ø,EF,HM
See Instructions
20 n 51007
n 88002
See Instructions
45 l 37041
HM,HX,
O,PA,T
3/4”, 7/8”
1/2”
5
45
See Instructions
HM,HX,
O,PA,T
3/4”, 7/8”
See Instructions
10 30
1/2”
5
10 30
45
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
1/2”
74426 78058
BN
74426 78058
BN
74426 78058
BN
–
78058
–
74669 78058
–
74669 78058
–
–
78104
–
–
74428
–
–
78058
78058
78013
78058
–
–
78058
–
30
13, 18, 19mm, NO DRILL 5 10 45
7/8”
3/4”
1/2”
7.5 12 30
15,18,21mm, 1/2”
5 6 30
T-50, 3/4”,
11/16”, 9/16”
18mm, 3/4” 1/2”
6 10 45
deep socket
18mm, 3/4” 1/2”
6 10 45
deep socket
3/4”
1/2”
5 8 30
3/4”
1/2”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
7.5 12 30
5 6 30
1/2”
6
10 45
1/2”
6
10 45
1/2”
3/4”
1/2”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5 8 30
7.5 12 30
5 6 40
1/2”
6
10 45
1/2”
6
10 45
1/2”
3/4”
1/2”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5 8 30
7.5 12 30
5 6 30
1/2”
6
10 45
1/2”
6
10 45
1/2”
5
5
8
6
30
30
–
–
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
5
10 30
n 44652 CS,HM,
3/4”, 7/8”
1/2”
6
10 20
n 44027 HX,O,
3/4”, 7/8”
1/2”
5
10 30
l 44652 CS,HM,
3/4”, 7/8”
1/2”
6
10 20
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
5
10 30 n 41906
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 74664 78013
–
l 44652 CS,HM
l 37051
3/4”, 7/8”
1/2”
3/4”
1/2”
6
5
5
10 20
6 20
10 30 n 41906
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 74665 78058
–
6
5
10 20
6 20
PA,T
HX,O,P
E-150 Econoline Van
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
30
HX,O,P
E-150 Econoline Van
1250 lb TW 12000 lb GTW
3/4”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
WIRING
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
l 44652 CS,HM
l 37051
3/4”, 7/8”
1/2”
3/4”
1/2”
–
ABBREVIATIONS
FB Will not fit vehicles fitted with optional 31" tires stowed under vehicle.
GH Will not fit models with 34" wide frames.
HP Requires four (4) 7/16" x 1" x 2" spacer blocks (#01080-012) for installation.
(Sold separately)
JT 2WD models only.
SG Hitches produced before 09/10/07 are rated at 1000/10000 WC & 1200/12000 WD.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
GU,HX
n 36025 –
n 36025 FP
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 36025 FP
n 44108 FP,GU,
80-81
Bronco Full Size w/Deep Drop Bumper
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Bronco Full Size
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
123
MODEL
FORD
MODEL
FORD
122
REESE TOWPOWER
REESE TOWPOWER
45 l 37041
00-03
n 88002
See Instructions
45 l 51094
Ø,RT
E-150 Econoline
Van Full Size, All Models
04-07
n 88002
See Instructions
l 37041
45 l 51094
Ø,RT
APPLICATIONS GUIDE
09-12
04-11
Econoline Van Full Size,
Except E-250 Super Wagon, Cargo Van & E-350 Models
75-91
E-250 Econoline
n 88002
n 88002
See Instructions
See Instructions
See Instructions
45 l 51094
3/4”
3/4”
3/4”
Ø,RT
l 51007 HM,HX,
O,PA,T
E-250 Econoline Van
E-250 Econoline Van
92-94
95-96
97-03
n 06127 Ø,EF,HM
n 06127 Ø,EF,HM
n 06127 Ø,EF,HM
See Instructions
See Instructions
See Instructions
20 n 51007
20 n 51007
20 n 51007
HM,HX,
O,PA,T
HM,HX,
O,PA,T
HM,HX,
O,PA,T
n 51094 Ø,RT
10 12 30 74665 78058
BN
8
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 –
78058
–
CH
NO DRILL 6
l 37051
l 44652 CS,HM
3/4”
1/2”
3/4”, 7/8”
1/2”
l 37051
3/4”, 7/8”
1/2”
5
10 30
1/2”
1/2”
1/2”
5
5
5
10 30
10 30
10 30
15 n 41906
13/16”, 7/8”
9/16”
10 12 30
1/2”
6 20 n 41926
10 20
6 20 n 41906
Ø,@,HM
3/4”
5
6
5
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 85774 78058
l 44532 Ø
l 44652 CS,HM
3/4”
NO DRILL 6
1/2”
6
13/16”, 7/8”
9/16”
10 12 30
l 37051
3/4”
1/2”
5
8 15 n 41926
10 20
6 20 n 41906
Ø,@,HM
3/4”, 7/8”
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 85774 78058
l 44532 Ø
l 44652 Ø,CS,HM
3/4”
NO DRILL 6
1/2”
6
8 15 n 41926
10 20
Ø,@,HM
13/16”, 7/8”
9/16”
10 12 30
3/4”, 7/8”
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
5
10 30
l 44652 CS,HM,
3/4”, 7/8”
1/2”
6
10 20
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
5
10 30 n 41906
@,HM,HY
13/16”, 7/8”
l 44652 CS,HM
l 37051
3/4”, 7/8”
1/2”
3/4”
1/2”
6
5
5
10 20
6 20
10 30 n 41906
@,HM,HY
5
6
5
6 20
10 20
10 30 n 41906
@,HM,HY
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
l 37051 –
l 44652 CS,HM
3/4”
1/2”
3/4”, 7/8”
1/2”
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
l 37051 –
l 44652 CS,HM
3/4”
1/2”
3/4”, 7/8”
1/2”
l 44532 Ø
3/4”
5
6
NO DRILL 6
–
–
9/16”
10 12 30 74664 78013
–
13/16”, 7/8”
9/16”
10 12 30 74665 78058
–
13/16”, 7/8”
9/16”
10 12 30 74665 78058
BN
74665 78058
BN
6 20
10 20
8 15
00-03
E-250 Econoline Van
Full Size, Inc. E-250 Super Wagon Cargo Van
E-250 Econoline Van
E-250 Econoline Van Full Size,
Except E-250 Super Wagon Cargo Van Models
00-03
E-250 Econoline Van
Full Size, Inc. E-250 Super Wagon Cargo Van
E-250 Econoline Van
04-07
n 41926 Ø,@,HM
13/16”, 7/8”
2008
n 41906 @,HM,HY 13/16”, 7/8”
NO DRILL 6
8 15
n 41926 Ø,@,HM
04-07
04-07
2008
Inc. E-250 Super Wagon Cargo Van
All Models
2008
l 51094 Ø,RT
l 51094 Ø,RT
3/4”
3/4”
NO DRILL 6
NO DRILL 6
8 15
8 15
3/4”, 7/8”
1/2”
l 44532 Ø
3/4”
NO DRILL 6
8
15
l 37051 –
3/4”
1/2”
5
6
20
6
l 44652 CS,HM
l 44532 Ø
3/4”, 7/8”
1/2”
3/4”
NO DRILL 6
l 37051 –
3/4”
1/2”
6
5
10 20 n 41906
@,HM,HY
6
l 51094 Ø,RT
3/4”
NO DRILL 6
8 15
9/16”
10 12 30 74665 78058
BN
13/16”, 7/8”
9/16”
10 12 30 –
78058
–
–
78058
–
9/16”
10 12 30 –
78058
–
9/16”
10 12 30 85774 78058
CH
85774 78058
CH
20
l 44652 CS,HM
3/4”, 7/8”
1/2”
l 44532 Ø
3/4”
NO DRILL 6
8
15
l 37051 –
3/4”
1/2”
5
6
20
6
13/16”, 7/8”
10 20
8 15
n 41926 Ø,@,HM
09-11
09-12
l 44652 CS,HM
CH
78058
3/4”
FOOTNOTES
9/16”
3/4”
8 15
STANDARD WIRE
13/16”, 7/8”
l 44532 Ø
NO DRILL 6
T-CONNECTOR
Ø,@,HM
45
8 15
45
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
10 20
6 20
8 15 n 41926
DRILL BITS
BN
NO DRILL 6
8 15
3/4”, 7/8”
10 12 30 74665 78058
3/4”
NO DRILL 6
3/4”, 7/8”
9/16”
n 44532 Ø
3/4”
3/4”, 7/8”
13/16”, 7/8”
8 15
HX,O,P
E-250 Econoline
@,HM,HY
NO DRILL 6
45
45 l 51094
10 30 n 41906
6
5
NO DRILL 6
See Instructions
Ø,RT
5
HITCH
NUMBER
1/2”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
1/2”
3/4”
DRILL BITS
3/4”, 7/8”
WRENCHES
l 44652 CS,HM
l 37051
45
FOOTNOTES
DRILL BITS
WRENCHES
1/2”
10 30
10 20 n 41906
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 85774 78058
CH
13/16”, 7/8”
9/16”
10 12 30 85774 78058
CH
85774 78058
CH
ABBREVIATIONS
DG 1971-77 (Standard) Van: will not fit with optional large gas tank.
1974-77 (Maxi) Van: includes models with optional large gas tank.
DH Cannot be installed on 1987 and later vehicles with factory step bumper
unless step bumper and its mounting brackets are permanently removed and
standard factory bumper is installed.
DV Will not fit short wheel base models.
JT 2WD models only.
APPLICATIONS GUIDE
E-150 Econoline
n 88002
n 44027 HX,O,PA,T 3/4”, 7/8”
See Instructions
l 37041
2008
5
See Instructions
E-150 Econoline
E-150 Econoline
1/2”
1250 lb TW 12000 lb GTW
WRENCHES
See Instructions
3/4”, 7/8”
WIRING
FOOTNOTES
n 88002
HM,HX,
O,PA,T
STYLE
20 n 51007
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
See Instructions
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 06127 Ø,EF,HM
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
YEAR
97-03
STYLE
MODEL
E-150 Econoline Van
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
125
125
FORD
MODEL
MODEL
FORD
124
REESE TOWPOWER
REESE TOWPOWER
O,PA,T
n 06127 Ø,EF,HM
92-94
20 n 51007
See Instructions
3/4”, 7/8”
1/2”
5
10 30
5
10 30
l 44652 CS,HM,
3/4”, 7/8”
1/2”
6
10 20
3/4”
1/2”
5
6
3/4”, 7/8”
1/2”
5
10 30
l 37051 –
n 51007 HM,HX,
3/4”, 7/8”
1/2”
5
10 30
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
5
10 30
n 06127 Ø,EF,HM
n 06127 Ø,EF,HM
6
6
10 20
10 20
HM,HX,
O,PA,T
3/4”, 7/8”
1/2”
5
10 30
l 37051 –
3/4”
1/2”
5
6
n 51007 HM,HX,
3/4”, 7/8”
1/2”
5
10 30
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
5
10 30
n 51007 HM,HX,
3/4”, 7/8”
1/2”
5
10 30
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20
3/4”, 7/8”
1/2”
5
10 30
n 44027 HX,O,PA,T 3/4”, 7/8”
1/2”
5
10 30 n 41906
5
HM,HX,
O,PA,T
20 n 41906
@,HM,HY
13/16”, 7/8”
13/16”, 7/8”
9/16”
9/16”
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
1/2”
20 n 51007
See Instructions
FOOTNOTES
1/2”
3/4”, 7/8”
O,PA,T
97-03
HITCH
NUMBER
l 44652
l 44652 CS,HM
3/4”, 7/8”
10 30
@,HM,HY
9/16”
10 12 30 85774 78058
CH
74664 78013
–
10 12 30 74664 78013
–
74665 78058
BN
10 12 30 74665 78058
BN
74665 78058
BN
BN
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 74665 78058
13/16”, 7/8”
9/16”
10 12 30
1/2”
l 51094 Ø,RT
3/4”
NO DRILL 6
8 15
3/4”
NO DRILL 6
6
8
20 n 41926
15
Ø,@,HM
00-03
l 37051 –
l 44532 Ø
3/4”
All Models
E-350 Econoline Van
04-07
l 51094 Ø,RT
3/4”
NO DRILL 6
8 15
l 44532 Ø
3/4”
NO DRILL 6
8
15 n 41906
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30 –
78058
–
1/2”
13/16”, 7/8”
9/16”
l 51094 Ø,RT
3/4”
NO DRILL 6
8 15
3/4”
NO DRILL 6
10 20 n 41926
8 15 n 41906
Ø,@,HM
2008
l 44652 CS,HM
l 44532 Ø
3/4”, 7/8”
E-350 Econoline Van
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30
10 12 30 85774 78058
–
1/2”
13/16”, 7/8”
9/16”
l 51094 Ø,RT
3/4”
NO DRILL 6
8 15
3/4”
NO DRILL 6
10 20 n 41926
8 15 n 41906
Ø,@,HM
09-12
l 44652 CS,HM
l 44532 Ø
3/4”, 7/8”
E-350 Econoline Van
@,HM,HY
13/16”, 7/8”
9/16”
10 12 30
10 12 30 85774 78058
CH
1/2”
13/16”, 7/8”
9/16”
10 12 30
0
10 20 n 41926
45
Ø,@,HM
07-10
l 44652 CS,HM
n 44567 Ø,CP,GP,
3/4”, 7/8”
Edge All, Except Sport Models
Edge Sport
09-10
Edge All, Except Sport Models
11-12
Edge Sport
2011
Escape
01-02
n 06525 Ø,GP,JR,KH 5.5mm, 8mm, 3/4” NO DRILL 45 n 51200 CP,GP,JR,KH 5.5, 8mm,
3/4”
n 51200 CP,GP,JR,KH 5.5, 8mm,
3/4”
45 l 51142
See Instructions
Ø,RT,KH
Escape
n 88001
2003
45 l 51142
See Instructions
Ø,RT
n 37042
Escape
n 88001
2004
45 l 51142
See Instructions
n 37042
Escape All, Inc. Hybrid
Escape All, Inc. Hybrid
–
Escort Sedan
1997 n 77018
–
Escort Sedan
98-99 n 77022
–
9/16”, 11/16”, 9/16”
13/16”
9/16”, 11/16”, 9/16”
13/16”
3/4”, 11/16”, 13/16” 1/2”
10, 18mm, NO DRILL 3.5 5
11/16”
See Instructions
10, 18mm, NO DRILL 3.5 5
11/16”
See Instructions
10, 18mm, NO DRILL 3.5 5
11/16”
See Instructions
55
35
45
35
45
35
85774 78058
CH
NO DRILL 3.5
45
74707 78058
CH
NO DRILL 3.5 4
45
85742 –
CH
NO DRILL 3.5 4
45
NO DRILL 3.5 5
35
74664 78013
HG,RW
74664 78013
HG,RW
–
78104
–
lb
6
60
NO DRILL 3.5 5
35
1/2”
5
6
60
NO DRILL 3.5 5
35
1/2”
5
25
74703 78104
–
10, 18mm, 5/8” NO DRILL 3.5 5
25
85774 78058
78070 78058
CH
35
–
78104
–
35
74665 78058
–
30
74665 78058
–
7/8”
1”, 3/8”
7/8”
1”, 3/8”
n 51191 †,HM
n 51194 HM
7/8”
1”, 3/8”
7/8”
1”, 3/8”
n 06417 HM
n 51191 †,HM
7/8”
1”, 3/8”
7/8”
1”, 3/8”
20
20
20
20
20
20
n 51194 HM
7/8”
1”, 3/8”
20
l 44647 Ø
1/2”
5
TW
NO DRILL 3.5 5
n 06417 †,HM
n 06417 HM
45
6
NO DRILL 3.5
60
08-12
91-96 n 77018
0
5.5mm, 8mm,
JR,KH
3/4”
n 44641 Ø,GP,JR,KH 5.5mm, 8mm,
3/4”
n 44658 Ø,GP,JR,KH 5.5mm or
7/32”, 8mm,
3/4”
n 44672 Ø,GP,JR,KH 8mm,5.5mm (or
7/32”), 3/4”
l 33039 Ø,KH
10, 18mm,
11/16”
n 37152 KH
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
l 33039 Ø
10, 18mm,
11/16”
n 37152 KH
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
l 33039 Ø
10, 18mm,
11/16”
n 37152 KH
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
l 44647 Ø
10, 18mm, 5/8”
6
05-07
Escort All Models
Ø,RT
4
55
BN
5
n 37042
1/2”
4
6
52
n 88001
1/2”
6
74665 78058
Factory Tow
Package
models only
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
97-03
20 n 41906
5
20 n 51007
See Instructions
13/16”, 7/8”
1/2”
O,PA,T
95-96
n 41926 Ø,@,HM
3/4”, 7/8”
n 51007 HM,HX,
95-96
O,PA,T
APPLICATIONS GUIDE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
1/2”
CS,HM
All Models
Inc. Super Wagon
DRILL BITS
n 44027 HX,O,PA,T 3/4”, 7/8”
HM,HX,
O,PA,T
O,PA,T
All Models
Inc. Super Wagon
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
l 51007 HM,HX,
75-91
WIRING
1250 lb TW 12000 lb GTW
09-11
HX,O,P
All Models
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Inc. E-250 Super Wagon Cargo Van
All Models
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
127
MODEL
FORD
MODEL
FORD
126
REESE TOWPOWER
REESE TOWPOWER
98-03 n 77022
–
Escort Wagon
1997 n 77018
–
Escort Wagon
Excursion
Excursion w/ Factory 7-way
Expedition
98-99 n 77078
00-03
00-05
97-02
†,GP,JR
Expedition
Explorer All Styles
Explorer 2 & 4 Dr.
3/4”, 11/16”,
13/16”
9/16”, 11/16”,
13/16”
See Instructions
APPLICATIONS GUIDE
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
–
74665
74682
74665
78013
–
78058
78058
–
74665 78058
85759 78058
74190 –
BN
74724 –
BN,GC
74724 –
BN,GC
74724 –
BN,GC
74724 –
BN,GC
74665 78058
BN
n 06365 –
See Instructions
15 n 51024
Ø,HM
l 37041
n 06365 Ø
15 n 51033
–
n 06365 Ø
15 n 51033
Ø
n 06365 –
15 n 51033
Ø
n 51033 Ø
7/8”
See
Instructions
15, 18,
NO DRILL 5
21mm, 3/4”
10 15
45
6 15
n 33052 Ø,GP
3/4”, 7/8”
NO DRILL 5
8
n 44032 Ø,HM
n 44622 Ø,GP
7/8”, 3/4”
NO DRILL 5
NO DRILL 6
10 20
10 15
NO DRILL 4
1/2”
5
5
6
45
20
5
6
25
15, 18, 21mm, NO DRILL 5
3/4”, 15/16”
13/16”,
1/2”
5
7/8”,15/16”
3/4”, 15/16” 1/2”
5
6
20
15, 18,
NO DRILL 5
21mm, 3/4”
See Instructions
6 15
6
20
45
5
5
6
6
6
50
25
15
15, 18,
NO DRILL 5
21mm, 3/4”
15, 18,
NO DRILL 5
21mm, 3/4”
See Instructions
NO DRILL 5
6
20
1/2”
5
6
20
15, 18,
NO DRILL 5
21mm, 3/4”
1/2”
15, 18,
NO DRILL 5
21mm, 3/4”
15, 18,
NO DRILL 5
21mm, 3/4”
l 33051 Ø,JF
n 37012 –
l 37051 JF
6 15
n 44100 Ø
6 15
l 33051 Ø,JF
45
6 15
n 37012 Ø
l 37051 JF
Ø
6 15
l 33051 Ø,JF
6 15
n 37012 Ø
n 44100 Ø
n 06365 –
15 n 51033
Ø
n 51033 Ø
15, 18,
NO DRILL 5
21mm, 3/4”
15, 18,
NO DRILL 5
21mm, 3/4”
6 15
l 33051 Ø,JF
6 15
n 37012 Ø
l 37051 Ø,JF
l 44067 Ø,JF
n 44100 Ø
n 06365 –
15 n 51033
Ø
n 51033 Ø
15, 18,
NO DRILL 5
21mm, 3/4”
15, 18,
NO DRILL 5
21mm, 3/4”
6 15
l 33051 Ø,JF
6 15
n 37012 Ø
l 37051 Ø,JF
l 44067 Ø,JF
n 44100 Ø
Explorer 4 Dr.
Explorer 4 Dr.
2001
02-03
l 33031 Ø,KL
Explorer 4 Dr.
04-05
l 33031 Ø,KL
Explorer Models w/1-1/4 Receivers Only
06-10
n 44542 Ø,KL
7/8”, 3/4”
l 44659 Ø, HM, JR, L 18mm, 3/4”
l 33051 –
13/16”,
7/8”,15/16”
l 37051 –
3/4”
l 37051 Ø,JF
l 44067 Ø,JF
02-03
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
20
n 44100
Explorer Sport 2 Dr.
DRILL BITS
–
l 44067 Ø,JF
2001
WRENCHES
78013
l 37041
n 51033 Ø
Explorer 4 Dr.
FOOTNOTES
–
n 51033 –
2001
HITCH
NUMBER
35
l 44067 Ø,JF
Explorer Sport 2 Dr.
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
9/16”
l 37041
98-00
DRILL BITS
–
n 44100 –
Explorer 2 & 4 Dr.
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
74665 78058
1/2”
20
BN
–
BN
BN
BN
3/4”
1/2”
13/16”,
7/8”,15/16”
15, 18, 21mm,
3/4”, 15/16”
13/16”,
7/8”,15/16”
3/4”, 15/16”
1/2”
3/4”
1/2”
5
5
6
6
40
30
13/16”,
7/8”,15/16”
15, 18, 21mm,
3/4”, 15/16”
13/16”,
7/8”,15/16”
3/4”, 15/16”
1/2”
5
6
45
NO DRILL 5
6
20
1/2”
5
6
20
1/2”
5
6
40
3/4”
1/2”
13/16”,
7/8”,15/16”
15, 18, 21mm,
3/4”, 15/16”
13/16”,
7/8”,15/16”
3/4”, 15/16”
1/2”
5
5
6
6
30
45
NO DRILL 5
6
20
1/2”
5
6
20
1/2”
5
6
40
3/4”
1/2”
13/16”,
7/8”,15/16”
15, 18, 21mm,
3/4”, 15/16”
13/16”,
7/8”,15/16”
3/4”, 15/16”
1/2”
5
5
6
6
30
45
NO DRILL 5
6
20
1/2”
5
6
20
1/2”
5
6
40
3/4”
1/2”
5
6
6
30
45
6
20
8
20
74724 78104
74665 78058
BN,GC
NO DRILL 5
NO DRILL 5
8
20
–
78058
–
NO DRILL 5
8
25
–
78013
–
13/16”,
1/2”
5
7/8”,15/16”
15, 18, 21mm, NO DRILL 5
3/4”, 15/16”
15, 18mm,
7/8”
15, 18mm,
7/8”
13mm, 3/4”
BN
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
30
2003
11-12
91-94
95-97
WIRING
1250 lb TW 12000 lb GTW
1/2”
n 51033 –
Explorer 2 & 4 Dr.
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Escort ZX2
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
129
MODEL
FORD
MODEL
FORD
128
REESE TOWPOWER
REESE TOWPOWER
2001
l 51141 Ø,RT,CS
Explorer Sport Trac
02-03
l 51141 Ø,RT,CS
Explorer Sport Trac
04-05
l 51141 Ø,RT,CS
F-100, F-150, F-250, F-350 63-72
n 51016 HM
n 51017 GP
F-100, F-150, F-250, F-350 63-72
w/Deep Drop Bumper
F-100, F-150, F-250, F-350 73-79
n 51016 HM
13/16”, 7/8”,
15/16”
13/16”, 7/8”,
15/16”
13/16”, 7/8”,
15/16”
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
6 15
l 33020 Ø,CS
NO DRILL 5
6 15
l 33020 Ø,CS
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 33065 FP
10 40
n 37087 FP
3/4”, 7/8”
6
10 45
n 37081 FP,M
13, 18, 19mm, NO DRILL 5
7/8”
10 40
n 36025 FP,GU
3/4”
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 35
l 37069 GU
l 37094 GU
9/16”, 3/4”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5
7
6
7.5 35
12
10 40
1/2”
6
10 40
1/2”
5
8 30
10 45
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 36025 GH
n 37081 FP,M
45 n 51009
–
n 51016 FT,HM
n 51017 FT,GP
1/2”
15/16”, 3/4” 5/8”
–
78058
BN
6
15
–
78058
BN
8
30
–
78058
BN
10 45
–
78058
BN
7.5 12 30
–
78058
BN
–
78058
BN
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 35 n 45002
10 40
l 37069 GU
9/16”, 3/4”
1/2”
5
7.5 35
l 37094 GU
n 44026 GU
15/16”, 3/4” 5/8”
3/4”, 7/8”
1/2”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
7
5
6
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8 30
10 45
n 36025 –
n 37081 FP,K,M
7.5 12 30 n 41904
13, 18, 19mm, NO DRILL 5
7/8”
@,HD,KF
#,GU,TF
n 41904 @,HD,KF
n 45002 #,GU,TF
F-100, F-150, F-250, F-350 87-91
Styleside/Flareside, All Models Inc. SuperCab
n 88001
See Instructions
45 n 51016
FT,HM
n 51017 FT,GP
n 51009 –
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 36025 FP,GU
3/4”
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 35
5
10 30
l 37069 GU
l 37094 GU
9/16”, 3/4”
n 44026 GU
n 44108 FP,GU,
3/4”, 7/8”
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5
7
5
6
7.5 35
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8 30
10 45
HM,HX
n 44109 FP,GP,
GU,HX
F-100, F-150, F-250, F-350 87-91
w/Deep Drop Bumper, Inc. SuperCab
92-93
F-150 Flareside w/Rear Fascia
F-150 Flareside w/Rear Fascia
92-96
n 36025 –
n 37081 FP,K,M
n 88001
n 88001
See Instructions
See Instructions
45
45
n 36025 FP
n 36047 –
1/2”
1/2”
15/16”, 3/4” 5/8”
7.5 12 30
13, 18, 19mm, NO DRILL 5
7/8”
3/4”
1/2”
3/4”, 9/16”
1/2”
FOOTNOTES
15
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
F-100, F-150, F-250, F-350 80-86
w/Deep Drop Bumper, Inc. SuperCab, Will Not Fit
Custom Fascia
F-100, F-150, F-250, F-350 87-91
Styleside, All Models Inc. SuperCab
STANDARD WIRE
6
3/4”
GU,HX
T-CONNECTOR
BN
n 36025 FP,GU
n 44109 FP,GP,
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
78058
10 30
HM,HX
DRILL BITS
–
13, 18, 19mm, NO DRILL 5
7/8”
1/2”
WRENCHES
15
5
See Instructions
FOOTNOTES
6
15/16”, 7/8”, NO DRILL 5
13/16”
15/16”, 7/8”, NO DRILL 5
13/16”
15/16”, 7/8”, NO DRILL 5
13/16”
See Instruc5
tions
1/2”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
NO DRILL 5
GU,HX
See Instructions
DRILL BITS
l 33020 Ø,CS
n 44109 FP,GP,
n 88001
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
6 15
HM,HX
F-100, F-150, F-250, F-350 73-79
w/Deep Drop Bumper
F-100, F-150, F-250, F-350 80-86
All, Inc. SuperCab, Will Not Fit Custom Fascia
1250 lb TW 12000 lb GTW
NO DRILL 5
1/2”
WIRING
7.5 12 30
5 7 30
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
10 12 30 74426 –
BN
12 14 45
74426 –
BN
10 12 30 74181 –
BN
12 14 45
74181 –
BN
74181 –
BN
74181 78058
BN
ABBREVIATIONS
ABBREVIATIONS
† No
Available
supply
ø
drillingwhile
required
- uselasts.
existing holes.
# Square
HitchesTube
requires
of a 2-1/2" shank ball mount.
n
hitchuse
design.
A
2
wire
system.
No
Converter
l Round Tube hitch design. required, but a ModuLite® can be used.
AA Requires
temporary
removal
of bumper
during installation.
@ Ultra
Frame
ball mount
must be
used to achieve
maximum weight carrying rating.
Hitch ratedwhile
at 1,000
GTW, 100 lbs. TW.
†AC Available
supplylbs.lasts.
AG
Drawbar
Kit
&
Accessory
Adapter
sold
separately.
AI 2Additional
installation
time required.
A
wire system.
No Converter
required, but a ModuLite® can be used.
AL Requires
Additionaltemporary
installation removal
time required
for vehicles
with load leveling compressor.
AA
of bumper
duringequipped
installation.
AMNot
Trofeó
priorTW.to 1989. 1989 units require minor
AC
Hitchrecommended
rated at 1,000onlbs.
GTW,models
100 lbs.
fascia
trim
and
exhaust
repositioning.
AO Additional
Will not fitinstallation
vehicles with
tailpipes.
AI
timetwin
required.
AY Additional
Does fit SEinstallation
models with
or 4 Dr.compressor.
STE.
AL
time Sport
requiredAppearance
for vehiclesPackage,
equipped GT
withmodel
load leveling
B 3 wire
system. Requires
Converter,
canunits
be used.
AMNot
recommended
on Trofeó
modelsbut
priora ModuLite®
to 1989. 1989
require minor
BC fascia
Hitch rated
at
1,500
lbs.
GTW,
100
lbs.
TW
trim and exhaust repositioning.
BF Will
Requires
Willtailpipes.
not fit with step bumper.
AO
not fitstandard
vehiclesbumper.
with twin
BN Does
Exterior
mounted
someAppearance
or all models.
May require
an aftermarket
AY
fit SE
modelsplug
withonSport
Package,
GT model
or 4 Dr. STE.
mounting
box orConverter,
bracket. (Sold
B 3electrical
wire system.
Requires
but a separately)
ModuLite® can be used.
CA
Models
with
dual
exhaust
require
exhaust
modification.
CG Requires
T-One incorporates
circuit protected
converter.
BF
standard bumper.
Will not fittaillight
with step
bumper.
CH Exterior
T-One ismounted
equippedplug
withoncircuit
ModuLite®
module.
BN
someprotected
or all models.
May require
an aftermarket
CK electrical
Drawbar installs
though
on SC
models.
Obtain customer approval.
mounting
box orfascia
bracket.
(Sold
separately)
CM
OEM
Style
Attachments/Requires
Factory
Bumper
For
Hitch
CA Models with dual exhaust require exhaust modification. Installation.
CN T-One
Requires
OEM factory
bumper
for hitch
installation.
CG
incorporates
circuit
protected
taillight
converter.
CP T-One
Fits AllisModels
without
Factoryprotected
InstalledModuLite®
Receiver. module.
CH
equipped
with circuit
CQ Drawbar
Will not fitinstalls
with heavy
suspension.
CK
thoughduty
fascia
on SC models. Obtain customer approval.
CS OEM
Will fitStyle
withAttachments/Requires
full-size spare tire stowed
vehicle.
CM
Factoryunder
Bumper
For Hitch Installation.
CT Requires
Will not fitOEM
longfactory
bed models
1999.installation.
CN
bumperafter
for hitch
CV Fits
WillAll
notModels
fit shortwithout
wheel Factory
base with
dual exhaust.
CP
Installed
Receiver.
D Will
See auto
trailer
wiring kit.
CQ
not fitdealer
with for
heavy
dutytow
suspension.
EB Will
Factory
electrical
bracket
fit with
thisvehicle.
hitch. Must use aftermarket
CS
fit with
full-size
sparewill
tireNOT
stowed
under
electrical
box
or
bracket.
EF Will
Fits all
standard
bumpers.
CV
notmodels
fit shortwith
wheel
base with
dual exhaust.
EG See
Relocation
of spare
tire bracket
is not kit.
required. NOTE: 19mm open end style
D
auto dealer
for trailer
tow wiring
wrench
must
be
purchased
to
allow
spareMust
tire after
hitch installation.
EB Factory electrical bracket will NOT fitremoval
with thisofhitch.
use aftermarket
EP electrical
Fascia trimming
required.
box or bracket.
F Fits
ModuLite®
EF
all modelsrecommended.
with standard bumpers.
FE Relocation
Fascia trimming
required.
Allowisadditional
installation
time. open end style
EG
of spare
tire bracket
not required.
NOTE: 19mm
Spare tiremust
repositioning
and/orto modification
of spare
tire tire
carrier
be required.
FP wrench
be purchased
allow removal
of spare
aftermayhitch
installation.
FS
Includes
2
&
4
WD
models
with
heavy
duty
suspension.
Models with recommended.
16" spare tire must be relocated.
FFT ModuLite®
GC Fascia
T-One istrimming
equippedrequired.
with ModuLite®
Lite module.
FE
Allow additional
installation time.
GP Spare
Hitch crosstube
concealed
behind
bumper.of spare tire carrier may be required.
tire repositioning
and/or
modification
FP
GU
Will
not
fit
vehicles
with
factory
or
aftermarket
lower Fascia/Rollpan or Tube Bumper.
H Models
3 wire system
OEMtirestandard
wire harness.
FT
with 16"with
spare
must be2relocated.
HB T-One
Slight isfascia
deformation
may occur on
models.
GC
equipped
with ModuLite®
Litesome
module.
HC Will
fit withconcealed
mini or fullbehind
size tire
stowed under vehicle.
GP
Hitchnot
crosstube
bumper.
HD
Will
not
fit
6
ft.
bed
pickups
except
6
ft.
Super
Cab.Fascia/Rollpan or Tube Bumper.
GU Will not fit vehicles with factory or aftermarket lower
HG 3T-One
converter.
H
wire incorporates
system withtaillight
OEM standard
2 wire harness.
HJ Slight
Per Dodge
manual:may
If trailer
with more than standard lighting
HB
fasciaowner's
deformation
occur isonequipped
some models.
(1 taillight
use of ModuLite®
HD Will
not fit per
6 ft.side),
bed pickups
except 6 ft. or dealer
Super Cab.supplied harness is required.
HM
Hitch
crosstube
is
visible
beneath
bumper.
HX Per
Minor
exhaust
modification
be isrequired.
HJ
Dodge
owner's
manual: Ifmay
trailer
equipped with more than standard lighting
HY (1
Ultra
Frameperballside),
mount
be used
in rise
position
taillight
useDT
of #4283/HH
ModuLite®#80125
or dealercannot
supplied
harness
is required.
on
vehicles
with
step
bumpers.
J Under
vehicle
spare
tire
stowage
is
retained.
JF Ultra
Will not
fit with
16" spare
tire.
HY
Frame
ball mount
DT #4283/HH
#80125 cannot be used in rise position
JL on
Installation
bumper and brackets.
vehicles requires
with stepOEM
bumpers.
JR
Exhaust
must
be
temporarily
lowered
for
installation.
JT Installation
2WD modelsrequires
only. OEM bumper and brackets.
JL
KA Exhaust
Gasolinemust
engine
only.lowered for installation.
JR
be models
temporarily
KH 2WD
Minormodels
heat shield
JT
only.modification may be required.
KK
When
installing
on
a
vehicle
KA Gasoline engine models only. originally equipped with an OEM hitch, OEM
bumperheat
brackets
be purchased
installed prior to new hitch installation.
KH Minor
shieldmust
modification
may beandrequired.
KL When
Hitch isinstalling
designedontoaattach
theequipped
OEM hitch.
KK
vehiclebeneath
originally
with an OEM hitch, OEM
LA bumper
Optionalbrackets
Wider 1200mm
CrossandBar.
must be Length
purchased
installed prior to new hitch installation.
LB
Optional
Wider
1300mm
Length
Cross
Bar.
LS Optional
T-One incorporates
low-side switching
taillightBar.
converter. Additional installation time required.
LA
Wider 1200mm
Length Cross
LT Optional
RequiresWider
removal
of factory
hitchCross
if equipped.
LB
1300mm
Length
Bar.
M Will
with heavy-duty
suspension.
LS
T-Onefitincorporates
low-side switching
taillight converter. Additional installation time required.
MB Requires
Will not fitremoval
modelsofequipped
withifairequipped.
suspension package.
LT
factory hitch
N
DO
NOT
cut
or
splice
vehicle
wiring.
use approved
T-One or see auto dealer
MB Will not fit models equipped with airOnly
suspension
package.
for trailer
kit. wiring. Only use approved T-One or see auto dealer
N DO
NOT cuttowor wiring
splice vehicle
O for
Willtrailer
not fittow
vehicles
with dual exhaust existing below the bumper.
wiringequipped
kit.
P Will
For 124"
and E350 ormodels,
kit (2626) is required (sold separately).
PA
not fitwheelbase
124" wheelbase
E-350adapter
models.
PA
Will
not
fit
124"
wheelbase
or
E-350
RD For vehicles equipped with factory
towmodels.
package, may require additional
RD components
For vehicles or
equipped
tow package,
may require additional
may bewith
usedfactory
as a replacement
harness.
components
or may
be usedplate
as a area
replacement
RI Cutting
of rollpan
in license
requiredharness.
for receiver tube access. Obtain
RI customer
Cutting ofapproval
rollpan infirst.
license plate area required for receiver tube access. Obtain
customer
first. relocation of spare tire.
RL Short
box approval
models require
RL Aftermarket
Short box models
relocationmay
of spare
tire.on 8 ft. bed models to ease
RN
spare require
tire repositioner
be used
RN installation
Aftermarketofspare
repositioner
largertirespare
tires. may be used on 8 ft. bed models to ease
installation
of
larger
spare
tires.
RO Requires
Will not fitdrilling
Silverado
SA
on 6 SS.
ft. bed models.
SA Will
Requires
6 ft. short
bed models.
SB
not fitdrilling
modelsonwith
bed.
SB Minor
Will nottrimming
fit models
with short
SC
of plastic
trunkbed.
pan required.
SC
Minor
trimming
of
plastic
trunk
pan are
required.
SD Hitches produced before 07/21/06
rated at 350/3500 WC.
SD
Hitches
produced
before
07/21/06
are rated
at 350/3500
SH Hitches produced before 09/27/07 are rated
at 1200/12,000
WCWC.
& 1400/14,000 WD.
SH Hitches
Hitches produced
produced before
before 07/31/07
09/27/07 are
are rated
rated atat 350/3500
1200/12,000
& 1400/14,000
SI
WCWC
& 500/5000
WD. WD.
SI Hitches
Hitches produced
produced before
before 04/27/08
07/31/07 are
are rated
rated atat 1200/12,000
350/3500 WCWC
& 500/5000
WD. WD.
SP
& 1400/14,000
SP
Hitches
produced
before
04/27/08
are
rated
at
1200/12,000
WC
&
1400/14,000
WD.
SS
Hitches
produced
before
03/31/08
are
rated
at
1000/10,000
WC
&
1200/12,000
WD.
SV Trunk
Trimming
or removal
appearance panel required.
TA
access
requiredofforunder
hitchbody
installation.
T For
Vans3/4with
bumpers
TF
andstep
1 ton
vehiclesrequire
only. longer ball mounts.
TA Will
Trunknot
access
required
hitchshield.
installation.
TH
fit models
withforskid
TF
For
3/4
and
1
ton
vehicles
only. damper installed at rear of frame on drivers side.
VB Will not fit vehicles with vibration
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 51017 GP
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
Explorer Sport Trac
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
131
MODEL
FORD
MODEL
FORD
130
REESE TOWPOWER
REESE TOWPOWER
See Instructions
45 n 51016
FT,HM
n 51017 FT,GP
n 51009 –
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
APPLICATIONS GUIDE
1993
n 51017 FT,GP
n 51016 FT,HM
n 88001
See Instructions
45 n 51016
FT,HM
n 51009 –
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
1/2”
6
10 40
1/2”
5
8 30
10 45
74181 78058
BN
8
30
74181 78058
BN
8
7
30
30
74181 78058
BN
74181 78058
BN
10 12 30 74181 78058
BN
74181 78058
BN
74181 78058
BN
74682 –
–
78063 –
–
74682 –
–
5
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
F-150 Flareside (New Body Style)
2004
2005
l 51064 Ø,RT
l 51064 Ø,RT,VB
n 37096
3/4”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 30
10 40
n 36025 –
1/2”
15/16”, 3/4” 5/8”
13, 18, 19mm, NO DRILL 5
7/8”
3/4”
1/2”
5
10 40
3/4”
1/2”
3/4”, 9/16”
1/2”
5
5
10 40
10 40
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 36025 FP,GU
3/4”
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 35
5
10 30
l 37069 GU
9/16”, 3/4”
1/2”
5
7.5 35
l 37094 GU
n 44026 GU
15/16”, 3/4” 5/8”
3/4”, 7/8”
1/2”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
7
5
6
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8 30
10 45
7/16”
5
See Instructions
3/4”
3/4”
See Instructions
FOOTNOTES
3/4”, 7/8”
7.5 35
12
10 30
10 40
n 36025 –
n 37081 FP,K,M
l 51064 Ø,RT,VB
n 37096
STANDARD WIRE
n 44026 GU
n 44108 FP,GU,
5
7
5
6
GU,HX
2004
T-CONNECTOR
9/16”, 3/4”
n 44109 FP,GP,
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
l 37069 GU
l 37094 GU
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
DRILL BITS
10 30
See Instructions
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
WRENCHES
5
HM,HX
94-96
FOOTNOTES
12 35
7.5 12 30
n 41904 @,HD,KF
n 51017 FT,GP
F-150 w/Deep Drop Bumper, Inc. SuperCab
HITCH
NUMBER
7
1/2”
94-96
F-150 Styleside/Flareside, All Models Inc. SuperCab 94-96
F-150 Styleside (New Body Style)
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
15/16”, 3/4” 5/8”
n 36025 –
n 36047 –
n 51017 FT,GP
F-150 Styleside, All Models Inc. SuperCab
DRILL BITS
l 37034 GU
94-95
94-96
BN
10 40
n 36025 –
n 37081 FP,K,M
n 51009 –
n 51016 FT,HM
74181 78058
3/4”
7/16”
7/16”
5
5
10 30
45
10 30
10
45
l 33077 Ø,HM,VB
l 37069 VB
1/2”
7.5 12 30
13, 18, 19mm, NO DRILL 5
7/8”
3/4”
7/16”
6
9/16”, 3/4”
l 37090 Ø,VB
l 44131 Ø,VB
3/4”
l 44655 Ø,HM,VB
l 33077 Ø,HM
TBD
l 37069 VB
l 37090 Ø,VB
9/16”, 3/4”
l 44131 Ø
l 44655 Ø,HM
3/4”
l 33077 Ø,HM,VB
l 37069 VB
3/4”
l 37090 Ø,VB
l 44131 Ø,VB
3/4”
l 44655 Ø,HM,VB
TBD
3/4”
3/4”
3/4”
TBD
9/16”, 3/4”
3/4”
5
7/16”
6
7/16”
5
NO DRILL 6
7/16”
6
1/2”
5
7/16”
6
7/16”
5
NO DRILL 6
7/16”
6
1/2”
5
7/16”
6
7/16”
5
NO DRILL 6
1/2”
8
7.5
10
10
8
8
7.5
10
10
8
8
7.5
10
10
8
30
45
30
30
30
30
45
30
30
30
30
45
30
30
30
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
ABBREVIATIONS
JT 2WD models only.
O Will not fit vehicles equipped with dual exhaust existing below the bumper.
RWOn some models it may require an upgraded flasher or Power Module.
T Vans with step bumpers require longer ball mounts.
APPLICATIONS GUIDE
F-150 Lightning Pickup
BN
n 36025 FP,GU
GU,HX
92-93
10 12 30 74181 78058
10 40
n 44109 FP,GP,
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
HM,HX
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 41904 @,HD,KF
n 88001
WIRING
1250 lb TW 12000 lb GTW
92-93
F-150 Styleside/Flareside, All Models Inc. SuperCab 92-93
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
F-150 Styleside, All Models Inc. SuperCab
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
133
MODEL
FORD
MODEL
FORD
132
REESE TOWPOWER
REESE TOWPOWER
3/4”
7/16”
5
10 30
l 33077 Ø,HM
l 37069 VB
l 37090 Ø,VB
l 44131 Ø
06-08
n 51075 Ø,CP
06-08
n 51096 Ø,CP,HM
n 51075 Ø,CP
09-12
F-150 Light Duty Flareside
F-150 Light Duty Styleside
F-150
Light Duty Heritage Flareside (Old Body Style)
97-03
2004
n 88001
n 88001
n 88001
See Instructions
See Instructions
See Instructions
n 88001
See Instructions
3/4”
NO DRILL 6
10 20 n 41920
10 13 30 74665 –
BN
9/16”, 3/4”
n 44007 Ø
n 36099 Ø
3/4”, 7/8”
10 15
10 15
45
n 88001
See Instructions
45 n 37096
n 51020 Ø
n 51095 Ø,FP,GP
15/16”, 3/4” 5/8”
6
10 20
l 37069 Ø
l 37094 GU
9/16”, 3/4”
n 44007 Ø
n 36099 Ø
3/4”, 7/8”
l 37034 GU
l 37069 Ø
15/16”, 3/4” 5/8”
10 15
10 20
45
10 15
10 20
n 36099 Ø
l 37034 GU
l 37069 Ø
45
NO DRILL 5
6
See Instructions
10 15
10 20
n 36099 Ø
l 37034 GU
l 37069 Ø
l 37094 GU
n 44007 Ø
F-150 SuperCrew
New Body Style, w/5.5 ft. Bed
F-150 SuperCrew
New Body Style, w/5.5 ft. Bed
F-150 SuperCrew
New Body Style, w/5.5 & 6.5 ft. Beds
2004
2005
06-08
l 51064 Ø,RT
3/4”
n 37096
See Instructions
l 51064 Ø,RT
3/4”
n 37096
See Instructions
3/4”
l 37034 GU
See Instructions
3/4”, 7/8”
5
7
NO DRILL 5
NO DRILL 6
1/2”
10 15
45
7/16”
5
10 30
45
7/16”
5
10 30
n 51075 Ø,CP
7/8”
10 20
n 51096 Ø,CP,HM
See Instructions
5
8 20
l 33077 Ø,HM
7
5
7
NO DRILL 5
NO DRILL 6
@,SU
3/4”, 13/16”, 1/2”
7/8”
78993 –
12 35
7.5 25
12
10 20
10 20 n 41920
@,SU
3/4”, 13/16”, 1/2”
7/8”
10 13 30 74665 –
78993 –
12 25
Factory Tow
Package
models only
BN
Factory Tow
Package
models only
7.5 25
12
10 20
10 20 n 41920
@,SU
3/4”, 13/16”, 1/2”
7/8”
10 13 30 74665 –
BN
7
5
15/16”, 3/4” 5/8”
7
3/4”, 7/8” NO DRILL 5
3/4”
NO DRILL 6
12
7.5
12
10
10
25
25
@,SU
3/4”, 13/16”, 1/2”
7/8”
10 13 30 74665 –
BN
7
5
15/16”, 3/4” 5/8”
7
3/4”, 7/8” NO DRILL 5
3/4”
NO DRILL 6
12
7.5
12
10
10
25
25
@,SU
3/4”, 13/16”, 1/2”
7/8”
10 13 30 74665 –
BN
7
5
15/16”, 3/4” 5/8”
7
3/4”, 7/8” NO DRILL 5
3/4”
7/16”
6
12
7.5
12
10
8
25
25
20
30
74682 –
–
6
5
NO DRILL 6
7/16”
6
10
10
8
8
30
30
30
30
74682 –
–
6
5
TBD
NO DRILL 6
10
10
8
10
30
30
30
20 n 41933
12 20 74682 –
–
1/2”
15/16”, 3/4” 5/8”
3/4”
9/16”, 3/4”
1/2”
15/16”, 3/4” 5/8”
9/16”, 3/4”
1/2”
15/16”, 3/4” 5/8”
9/16”, 3/4”
1/2”
l 37090 Ø
l 44131 Ø
3/4”
7/16”
3/4”
7/16”
l 44655 Ø,HM
l 33077 Ø,HM
TBD
l 37090 Ø
l 44131 Ø
3/4”
7/16”
3/4”
7/16”
l 44655 Ø,HM
n 44552 Ø,CP
7
15/16”, 3/4” 5/8”
NO DRILL 5
l 37094 GU
n 44007 Ø
00-03
FOOTNOTES
n 36099 Ø
l 37069 Ø
l 37094 GU
6
STANDARD WIRE
–
10 20
NO DRILL 5
T-CONNECTOR
74682 –
6
See Instructions
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
12 20
See Instructions
3/4”, 7/8”
DRILL BITS
NO DRILL 6
n 51095 Ø,FP,GP
See Instructions
WRENCHES
3/4”, 7/8”
15/16”, 3/4” 5/8”
45 n 37096
FOOTNOTES
n 44645 Ø,CP,GP
l 37034 GU
6
HITCH
NUMBER
–
10 15
NO DRILL 5
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
74682 –
NO DRILL 5
n 51020 Ø
n 51095 Ø,FP,GP
F-150 SuperCrew
DRILL BITS
12 20
3/4”, 7/8”
See Instructions
–
NO DRILL 6
n 51020 Ø
3/4”, 7/8”
12 20 74682 –
8 20
See Instructions
See Instructions
NO DRILL 10
3/4”, 7/8”
NO DRILL 5
45 n 37096
–
n 44645 Ø,CP,GP
3/4”, 7/8”
See Instructions
3/4”, 7/8”
12 20 74682 –
10 20 n 41933
n 51097 Ø,CP,HM
n 37096
n 51095 Ø,FP,GP
Ø,@,CP
NO DRILL 10
NO DRILL 6
NO DRILL 5
3/4”, 7/8”
3/4”, 7/8”
–
21mm, 3/4”,
7/8”
3/4”, 7/8”
n 51020 Ø
Ø,@,CP
74682 –
n 44552 Ø,CP
n 51097 Ø,CP,HM
See Instructions
30
45
30
30
30
20 n 41933
8 20
10 20
7/8”
n 51096 Ø,CP,HM
45 n 37096
8
7.5
10
10
8
10
l 44655 Ø,HM
n 44552 Ø,CP
l 37094 GU
n 44007 Ø
2004
1/2”
7/8”
See Instructions
5
n 51020 Ø
n 51095 Ø,FP,GP
F-150
Light Duty Heritage Styleside (Old Body Style)
7/16”
9/16”, 3/4”
10 20
09-12
97-03
6
5
3/4”
7/16”
6
3/4”
7/16”
5
TBD
NO DRILL 6
3/4”
WIRING
1250 lb TW 12000 lb GTW
3/4”
7/8”
20
20 n 41920
20
20 n 41920
Ø,@,CP
3/4”, 7/8”
NO DRILL 10
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
7/8”
See Instructions
5
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 51064 Ø,RT
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
YEAR
2005
STYLE
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
135
MODEL
FORD
MODEL
FORD
134
REESE TOWPOWER
REESE TOWPOWER
92-93
See Instructions
n 51097 Ø,CP,HM
45 n 51016 FT,HM
n 51017 FT,GP
n 51009 –
3/4”, 7/8”
NO DRILL 5
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
5
12 35 n 45002
10 30
l 37069 GU
l 37094 GU
9/16”, 3/4”
n 44026 GU
n 44108 FP,GU,
3/4”, 7/8”
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5
7
5
6
7.5 35
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8
n 44109 FP,GP,
92-93
F-250 All Models Inc. SuperCab
94-96
n 36025 –
n 37081 FP,K,M
n 88001
See Instructions
45 n 51016
FT,HM
n 51017 FT,GP
n 51009 –
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 36025 FP,GU
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 35 n 45002
5
10 30
l 37069 GU
l 37094 GU
9/16”, 3/4”
5
7
7.5 35
12
n 44026 GU
n 44108 FP,GU,
3/4”, 7/8”
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5
6
10 30
10 40
1/2”
6
10 40
1/2”
5
8
HM,HX
GU,HX
94-96
F-250 Heavy Duty All Models Inc. SuperCab
1997
n 36025 –
n 37081 FP,K,M
n 88001
See Instructions
45 n 51016
FT,HM
n 51017 FT,GP
n 51009 –
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
10 40
n 36025 FP,GU
10 40
l 37034 GU
15/16”, 3/4” 5/8”
7
12 35 n 45002
5
10 30
l 37069 GU
l 37094 GU
9/16”, 3/4”
n 44026 GU
n 44108 FP,GU,
3/4”, 7/8”
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
5
7
5
6
7.5 35
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8 30
10 45
GU,HX
F-250 Super Duty Pickups Only Will Not Fit Cab & Chassis
n 36025 –
n 37081 FP,K,M
1997
00-03
99-01
n 88001
See Instructions
n 37096
See Instructions
n 51020 Ø
3/4”, 7/8”
n 51095 Ø,FP,GP
See Instructions
n 37096
45 n 37096
n 51068 Ø,HM
n 51095 Ø,FP,GP
45
n 36099 Ø
3/4”
NO DRILL 6
10 15
l 37034 GU
15/16”, 3/4” 5/8”
6
10 20
l 37069 Ø
l 37094 GU
9/16”, 3/4”
n 44007 Ø
45
45
See Instructions
See Instructions
13, 18, 19mm, NO DRILL 5
7/8”
NO DRILL 5
See Instructions
3/4”
1/2”
15/16”, 3/4” 5/8”
–
6
6
10 20
10 20
10 20 n 41920
7
12 35
3/4”, 7/8”
5
7
NO DRILL 5
7.5 25
12
10 20
n 33088 Ø
3/4”, 7/8”
NO DRILL 6
8
l 37034 GU
l 37069 –
15/16”, 3/4” 5/8”
l 37093 Ø
3/4”
7
5
NO DRILL 6
12 30 n 41931
7.5 30 n 45008
10 30 n 45297
l 37094 GU
n 44141 Ø,HM
15/16”, 3/4” 5/8”
1/2”
15/16”, 3/4” 5/8”
9/16”, 3/4”
3/4”
1/2”
7
NO DRILL 6
–
12 14 45
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
74181 78058
–
10 12 30 74181 78058
–
12 14 45
30
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 44109 FP,GP,
97-99
#,GU,TF
13, 18, 19mm, NO DRILL 5 10 45
7/8”
3/4”
1/2”
7.5 12 30 n 41904 @,HD
HM,HX
F-250
Heavy Duty w/Deep Drop Bumper, Inc. SuperCab
1/2”
15/16”, 3/4” 5/8”
10 12 30 74181 78058
30
13, 18, 19mm, NO DRILL 5 10 45
7/8”
3/4”
1/2”
7.5 12 30 n 41904 @,HD
n 44109 FP,GP,
#,GU,TF
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
–
20 n 41922
12
10 20
#,GU,TF
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
74181 78058
–
10 12 30 74181 78058
–
12 14 45
74181 78058
@,SU
3/4”, 13/16”, 1/2”
7/8”
10 13 30 74682 –
78993 –
Ø,@
13/16”, 7/8”
NO DRILL 10
Ø,@,SH
3/4”, 7/8”
Ø,#,TF
3/4”
NO DRILL 12
NO DRILL 12
Ø,#,CS,EF, 21, 24mm
HM,LT,M,TF
12 15 74682 78058
15 30
14 20
NO DRILL 18 18 50
–
–
Factory Tow
Package
models only
–
ABBREVIATIONS
JT 2WD models only.
KF Will not fit Flareside.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
GU,HX
1/2”
@,HD
FOOTNOTES
7
STANDARD WIRE
15/16”, 3/4” 5/8”
74682 –
12 20
7.5 12 30 n 41904
T-CONNECTOR
l 37034 GU
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
10 40
DRILL BITS
1/2”
WRENCHES
3/4”
FOOTNOTES
n 36025 FP,GU
HITCH
NUMBER
10 15
10 40
HM,HX
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
NO DRILL 6
DRILL BITS
3/4”, 7/8”
STYLE
n 44645 Ø,CP,GP
15/16”, 3/4” 5/8”
WIRING
1250 lb TW 12000 lb GTW
WRENCHES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
500-750 lb TW 5000-7000 lb GTW
09-12
n 88001
CLASS V
FOOTNOTES
YEAR
MODEL
F-150 SuperCrew
New Body Style, w/5.5 & 6.5 ft. Beds
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
137
MODEL
FORD
MODEL
FORD
136
REESE TOWPOWER
REESE TOWPOWER
99-01
02-04
n 88001
See Instructions
Ø,HM
n 37096
n 51095 Ø,FP,GP
02-04
05-07
3/4”
n 51068 Ø,EB,HM
3/4”
n 51095 Ø,FP,GP
See Instructions
–
n 45012
20 n 41922
10 20
n 33088 Ø
3/4”, 7/8”
45
10 20
l 37034 GU
l 37069 –
15/16”, 3/4” 5/8”
6
l 37093 Ø
3/4”
l 37094 GU
n 44141 Ø,HM
15/16”, 3/4” 5/8”
3/4”
NO DRILL 6
12
10 20
9/16”, 3/4”
NO DRILL 6
8
7
5
NO DRILL 6
12 30 n 41931
7.5 30 n 45008
10 30 n 45297
1/2”
7
Ø,#,TF
15/16”
Ø,@
13/16”, 7/8”
Ø,@,SH
3/4”, 7/8”
Ø,#,TF
3/4”
Ø,#,CS,EF, 21, 24mm
HM,LT,M,TF
10 20
n 33088 Ø,EB
3/4”, 7/8”
NO DRILL 6
8
n 45012
20 n 41931
Ø,#,TF
6
6
10 20
n 37093 Ø,EB
n 44141 Ø,EB,HM
3/4”
NO DRILL 6
NO DRILL 6
10 30 n 45008
10 20 n 45297
Ø,#,TF
3/4”
08-10
11-12
92-93
n 88001
See Instructions
45 n 51017
FT,GP
n 51009 –
n 51016 FT,HM
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
13, 18,
19mm, 3/4”,
13/16”
15 30
n 45008 Ø,#,TF
n 45297 Ø,#,CS,EF,
21, 24mm
NO DRILL 12
NO DRILL 18
14 20
18 50
n 41931 Ø,@,EB,SH 3/4”, 7/8”
NO DRILL 12
15 30
n 45008 Ø,#,TF
n 45297 Ø,#,CS,EF,
NO DRILL 12
NO DRILL 18
14 20
18 50
3/4”
5
10 30
l 37034 GU
15/16”, 3/4” 5/8”
7
12 35 n 45002
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
l 37069 GU
9/16”, 3/4”
1/2”
5
7.5 35
l 37094 GU
n 44026 GU
15/16”, 3/4” 5/8”
3/4”, 7/8”
1/2”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
1/2”
7
5
6
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8
GU,HX
92-93
94-96
n 36025 –
n 37081 FP,K,M
n 88001
See Instructions
45 n 51017
FT,GP
n 51009 –
n 51016 FT,HM
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
See Instructions
5
13, 18, 19mm, 3/16”, 9/32”, 5
3/4”, 13/16” 1/2”, 17/32”
n 36025 FP,GU
10 30
10 40
l 37034 GU
l 37069 GU
15/16”, 3/4” 5/8”
l 37094 GU
n 44026 GU
15/16”, 3/4” 5/8”
3/4”, 7/8”
1/2”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
HM,HX
n 44109 FP,GP,
GU,HX
94-96
F-350 Heavy Duty All Models Inc. SuperCab
1997
n 36025 –
n 37081 FP,K,M
n 88001
See Instructions
45 n 51017
FT,GP
n 51009 –
n 51016 FT,HM
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
See Instructions
5
13, 18, 19mm, 3/16”, 9/32”, 5
3/4”, 13/16” 1/2”, 17/32”
12 35 n 45002
7.5 35
1/2”
7
5
6
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8
l 37034 GU
l 37069 GU
15/16”, 3/4” 5/8”
l 37094 GU
n 44026 GU
15/16”, 3/4” 5/8”
3/4”, 7/8”
1/2”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”
n 36025 –
#,GU,TF
#,GU,TF
9/16”, 3/4”
7
5
12 35 n 45002
7.5 35
1/2”
7
5
6
12
10 30
10 40
1/2”
6
10 40
1/2”
5
8
1/2”
3/4”
21, 24mm
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
10 12 30 74181 78058
–
12 14 45
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
74181 78058
–
10 12 30 74181 78058
–
12 14 45
30
13, 18, 19mm, NO DRILL 5 10 45
7/8”
3/4”
1/2”
7.5 12 30 n 41904 @,HD
10 30
10 40
GU,HX
@,HD
3/4”
30
7
5
1/2”
n 36025 FP,GU
n 44109 FP,GP,
9/16”, 3/4”
10 40
HM,HX
7.5 12 30 n 41904
13, 18, 19mm, NO DRILL 5 10 45
7/8”
3/4”
1/2”
7.5 12 30 n 41904 @,HD
10 40
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
NO DRILL 12
n 36025 FP,GU
n 44109 FP,GP,
DRILL BITS
n 41931 Ø,@,EB,SH 3/4”, 7/8”
10 40
HM,HX
15 30
14 20
NO DRILL 18 18 50
14 20
18 50
3/4”
Ø,#,CS,EF, 21, 24mm
HM,LT,M,TF
–
NO DRILL 12
NO DRILL 12
NO DRILL 12
NO DRILL 18
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
14 20 74894 –
12 15
14 20
15 30
HM,LT,M,TF
NO DRILL 12
NO DRILL 10
NO DRILL 12
NO DRILL 12
15/16”
Ø,@,EB,SH 3/4”, 7/8”
HM,LT,M,TF
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
1250 lb TW 12000 lb GTW
6
See Instructions
See Instructions
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
–
WIRING
30
#,GU,TF
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
3/4”
1/2”
74181 78058
–
10 12 30 74181 78058
–
12 14 45
ABBREVIATIONS
JT 2WD models only.
RT
APPLICATIONS GUIDE
APPLICATIONS GUIDE
F-250 Super Duty w/Deep Drop Bumper
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
45 n 51068
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
139
FORD
MODEL
MODEL
FORD
138
REESE TOWPOWER
REESE TOWPOWER
n 88001
See Instructions
45 n 51068
Ø,HM
n 51095 Ø,FP,GP
99-01
02-04
n 88001
See Instructions
45 n 51068
Ø,HM
02-04
05-07
3/4”
See Instructions
3/4”
–
See Instructions
n 51068 Ø,EB,HM
3/4”
n 51095 Ø,FP,GP
See Instructions
–
13, 18, 19mm, NO DRILL 5
7/8”
10 20
n 33088 Ø
3/4”, 7/8”
20 n 41922
6
10 20
l 37034 GU
l 37069 –
15/16”, 3/4” 5/8”
n 37093 Ø
3/4”
l 37094 GU
n 44141 Ø,HM
15/16”, 3/4” 5/8”
3/4”
NO DRILL 6
12
10 20
NO DRILL 6
8
7
5
NO DRILL 6
12 30 n 41931
7.5 30 n 45008
10 30 n 45297
NO DRILL 6
8
7
5
NO DRILL 6
12 30 n 41931
7.5 30 n 45008
10 30 n 45297
1/2”
7
n 45012
20 n 41922
6
10 20
n 33088 Ø
3/4”, 7/8”
6
10 20
l 37034 GU
l 37069 –
15/16”, 3/4” 5/8”
n 37093 Ø
3/4”
l 37094 GU
n 44141 Ø,HM
15/16”, 3/4” 5/8”
3/4”
NO DRILL 6
12
10 20
9/16”, 3/4”
1/2”
7
Ø,@
13/16”, 7/8”
Ø,@,SH
3/4”, 7/8”
Ø,#,TF
3/4”
Ø,#,CS,EF, 21, 24mm
HM,LT,M,TF
Ø,#,TF
15/16”
Ø,@
13/16”, 7/8”
Ø,@,SH
3/4”, 7/8”
Ø,#,TF
3/4”
Ø,#,CS,EF, 21, 24mm
HM,LT,M,TF
10 20
n 33088 Ø,EB
3/4”, 7/8”
NO DRILL 6
8
n 45012
20 n 41931
Ø,#,TF
6
6
10 20
n 37093 Ø,EB
n 44141 Ø,EB,HM
3/4”
NO DRILL 6
NO DRILL 6
10 30 n 45008
10 20 n 45297
Ø,#,TF
3/4”
08-10
11-12
99-00
F-350 Super Duty Cab & Chassis w/34 Wide 99-00
Frames & w/Deep Drop Bumper
01-04
F-350 Super Duty Cab & Chassis w/34
Wide Frames
Wide Frames
n 37087 FP
15/16”, 3/4” 5/8”
n 37088 –
15/16”, 3/4” 5/8”
n 37081 FP,M
6
NO DRILL 12
15 30
n 45008 Ø,#,TF
n 45297 Ø,#,CS,EF,
21, 24mm
NO DRILL 12
NO DRILL 18
14 20
18 50
n 41931 Ø,@,EB,SH 3/4”, 7/8”
NO DRILL 12
15 30
n 45008 Ø,#,TF
n 45297 Ø,#,CS,EF,
21, 24mm
NO DRILL 12
NO DRILL 18
14 20
18 50
@,SP
21, 22mm,
13/16”, 7/8”
1/2”,
9/16”
12 15 40
@
13/16”, 7/8”
9/16”
#,TF
15/16”, 1-1/8” 3/4”, 5/8” 12
12 15 40
14 60
10 45 n 41927
7.5 12 60 n 41938
n 45014
13, 18, 19mm, NO DRILL 5 10 45
3/4”
3/4”
7/8”
n 41927 @,SP
21, 22mm,
13/16”, 7/8”
1/2”, 9/16” 12
15 40
n 41940 @
21mm, 13/16”, 9/16”
15
7/8”
21, 22mm, 1/2”, 9/16” 12
13/16”, 7/8”
16 35
21mm, 13/16”, 9/16”
15
7/8”
21, 22mm, 1/2”, 9/16” 12
13/16”, 7/8”
16 35
16 35
08-10
n 45297 Ø,#,CS,EF,
21mm, 13/16”, 9/16”
15
7/8”
21, 24mm
NO DRILL 18
2011
n 45297 Ø,#,CS,EF,
21, 24mm
NO DRILL 18
18 50
21, 22mm,
13/16”, 7/8”
1/2”, 9/16” 12
15 40
21mm, 13/16”, 9/16”
15
7/8”
15/16”,
3/4”, 5/8” 12
1-1/8”
21, 22mm, 1/2”, 9/16” 12
13/16”, 7/8”
16 35
n 41927 @,SP
05-07
n 41927
08-11
99-04
@,SP
HM,LT,M,TF
HM,LT,M,TF
n 37088 –
15/16”, 3/4” 5/8”
7.5 12 60 n 41927
@,SP
n 45014 #,TF
05-07
n 37088 –
15/16”, 3/4” 5/8”
7.5 12 60 n 41927
@,SP
n 41940 @
n 45014 #,TF
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
15 30
14 20
NO DRILL 18 18 50
n 41931 Ø,@,EB,SH 3/4”, 7/8”
n 41940 @
F-450 Super Duty Cab & Chassis
w/34 Wide Frames
NO DRILL 12
NO DRILL 12
14 20
18 30
n 41940 @
w/34 Wide Frames
14 20
12 15
NO DRILL 12
NO DRILL 18
3/4”
Ø,#,CS,EF, 21, 24mm
HM,LT,M,TF
n 41940 @
Wide Frames
NO DRILL 12
NO DRILL 10
14 20
15 30
HM,LT,M,TF
w/34 Wide Frames
12 15 118001 –
74051
NO DRILL 12 15 30
NO DRILL 12 14 20
NO DRILL 18 18 50
NO DRILL 10
NO DRILL 12
NO DRILL 12
15/16”
Ø,@,EB,SH 3/4”, 7/8”
HM,LT,M,TF
WRENCHES
10 45
6
9/16”, 3/4”
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
–
n 37081 FP,K,M
WIRING
1250 lb TW 12000 lb GTW
21mm, 13/16”, 9/16”
7/8”
15/16”,
3/4”, 5/8”
1-1/8”
15 40
15 40
18 50
14 60
15 40
15 16 35
12 14 60
–
ABBREVIATIONS
JT 2WD models only.
SU Hitches produced before 03/31/08 are rated at 1000/10,000 WC & 1200/12,000 WD.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 51095 Ø,FP,GP
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
1997
99-01
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
F-350 Heavy Duty
w/Deep Drop Bumper, Inc. SuperCab
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
141
FORD
MODEL
MODEL
FORD
140
REESE TOWPOWER
REESE TOWPOWER
n 37088 –
08-11
15/16”, 3/4” 5/8”
@,SP
n 45014 #,TF
n 37088 –
99-04
15/16”, 3/4” 5/8”
7.5 12 60 n 41927
@,SP
n 41940 @
n 45014 #,TF
w/34 Wide Frames
n 37088 –
05-07
15/16”, 3/4” 5/8”
7.5 12 60 n 41927
@,SP
n 41940 @
w/34 Wide Frames
n 37088 –
08-11
15/16”, 3/4” 5/8”
7.5 12 60 n 41927
@,SP
n 45014 #,TF
Fiesta 4 Dr. Sedan
Fiesta 5 Dr. Hatchback
11-12 n 77229
11-12 n 77228
Five Hundred
05-07
Flex All, Inc. EcoBoost
09-12
Ø,HM
5/8”, 11/16”
Ø,HM,JR,KH 10mm, 3/4”,
11/16”
NO DRILL 15
NO DRILL 30
n 06301 Ø,GP,JR
10, 13, 15mm,
3/4”
n 51179 Ø,GP,JR
Flex Models w/Single Muffler & Dual Tail Pipes 09-12
On Drivers Side Only
2000 n 77114
Focus Sedan
n 51161
01-04 n 77114
Focus Sedan
n 51161
Focus Sedan, Except w/Street Appearance Pkg. 05-07 n 77114
n 51161
08-11 n 77176
Focus Coupe
08-11 n 77176
Focus Sedan
2012
Focus Sedan
77256
00-03 n 77115
Focus Wagon Built Before 11/1/02
03-07 n 77115
Focus Wagon Built After 11/1/02
00-07 n 77114
Focus ZX3 3 Dr. Hatchback,
Except SVT & w/Street Appearance Pkg.
n 51161
02-07 n 77114
Focus ZX5 5 Dr. Hatchback,
Except SVT & w/Street Appearance Pkg.
n 51161
04-07
Freestar
05-07
Freestyle
18, 19mm, 6” NO DRILL 4
ratchet
l 44620 Ø,†,HM,JR 18, 19mm
NO DRILL 4
1/2”
3/4”, 7/8”
1/2”
Ø,HM
3/4”, 7/8”
Ø,HM
3/4”, 7/8”
Ø,HM
3/4”, 7/8”
Ø,HM
3/4”, 7/8”
LTD Crown Victoria
LTD Crown Victoria
15 16 35
3/4”,
5/8”
1/2”,
9/16”
12 14 60
21mm, 13/16”,
7/8”
15/16”,
1-1/8”
21, 22mm,
13/16”, 7/8”
9/16”
15 16 35
3/4”,
5/8”
1/2”,
9/16”
12 14 60
21mm, 13/16”,
7/8”
15/16”,
1-1/8”
21, 22mm,
13/16”, 7/8”
9/16”
15 16 35
3/4”,
5/8”
1/2”,
9/16”
12 14 60
15/16”,
1-1/8”
3/4”,
5/8”
12 14 60
12 15 40
12 15 40
30
78032 78058
–
4
30
78087 78058
–
4
20
78087 78058
–
–
78013
–
–
78104
–
–
78058
–
78058
78058
78104
78058
78058
78058
–
78058
–
78022 –
79032 78058
–
–
–
7/8”
Ø,JR
7/8”
NO DRILL 20
NO DRILL 20
HM
3/4”, 7/8”
1/2”
20
HM
3/4”, 7/8”
1/2”
HM
3/4”, 7/8”
1/2”
20
20
–
HM
3/4”, 7/8”
1/2”
20
n 06989 Ø,JR
n 06301 Ø,GP,JR
06-09 n 77152
10-12 n 77239
83-91 n 77002
GP,JR,TA
12, 13mm, 3/4”
1/2”
Ø,GP,JR
11/16”
CA
3/4”
NO DRILL 20
1/2”
25 n 06043 CA
83-91 n 77002
CA
3/4”
1/2”
25
10, 13, 15mm,
3/4”
NO DRILL 30
CA
3/4”
1/2”
n 44129 GP,JR
n 44525 Ø,JR
3/4”
n 37081 FP,K,M
13, 18, 19mm, NO DRILL 5
7/8”
1/2”
3.5 5
10, 13, 15mm, NO DRILL 3.5 4
3/4”
30
30
CH
–
–
–
–
–
–
30
10 45
45
n 88002
25 n 06043
n 88002
25 n 06043
n 88002
FOOTNOTES
12 15 40
Ø,JR
Ø,HM,JR,KH 10mm, 11/16”
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
9/16”
78019
78019
85771
74665
–
–
Ø,HM,JR,KH 10mm, 11/16”
89-97
92-97 n 77002
21mm, 13/16”,
7/8”
15/16”,
1-1/8”
21, 22mm,
13/16”, 7/8”
CH
20
20
1/2”
20
1/2”
20
1/2”
20
1/2”
20
NO DRILL 30
NO DRILL 30
3/4”, 7/8”
Ø,HM
12 15 40
74699 78104
78095 78104
10, 13, 15mm, NO DRILL 3.5 4
3/4”
l 44636 Ø,HM,JR
Ø,HM
1/2”,
9/16”
30
n 51179 Ø,GP,JR
F-Series Super Duty Cab & Chassis w/34 Wide
Frames & 161 Wheelbase & w/Deep Drop Bumper
Fusion
Fusion
LTD Country Squire Wagon
Full Size
n 44525 Ø,JR
NO DRILL 30
21, 22mm,
13/16”, 7/8”
30
See Instructions
CA
See Instructions
CA
See Instructions
45
30 n 51103
45
30 n 51103
45
–
74699 78104
74699 78104
–
78058
–
–
–
CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
–
78058
–
CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
74428 78104
–
ABBREVIATIONS
JT 2WD models only.
SH Hitches produced before 09/27/07 are rated at 1200/12,000 WC & 1400/14000 WD.
SP Hitches produced before 04/27/08 are rated at 1200/12,000 WC & 1400/14000 WD.
SS Hitches produced before 03/31/08 are rated at 1000/10,000 WC & 1200/12000 WD.
SU Hitches produced before 03/11/08 are rated at 1000/10000 WC & 1200/12000 WD.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 45014 #,TF
WRENCHES
FOOTNOTES
HITCH
NUMBER
7.5 12 60 n 41927
n 41940 @
w/34 Wide Frames
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
w/34 Wide Frames
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
143
MODEL
FORD
MODEL
FORD
142
REESE TOWPOWER
REESE TOWPOWER
3/4”
25 n 06043
n 88002
25 n 06043
30 n 51103
45
30
FOOTNOTES
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STANDARD WIRE
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
n 33047 CA,GP
FOOTNOTES
3.5 6 30
HITCH
NUMBER
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
1/2”
STYLE
CA
CLASS V
500-750 lb TW 5000-7000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
98-09 n 77002
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
LTD Crown Victoria
–
78104
–
–
78058
–
–
–
–
78058
78058
78058
–
20
–
78058
–
20
74428 78058
–
20
74428 78058
–
45
–
78058
–
CA
See Instructions
CA,GP
13mm, 3/4” 1/2”
13mm, 3/4”
1/2”
3.5 6
30
LTD Crown Victoria Wagon 83-91 n 77002
Full Size
CA
3/4”
1/2”
LTD Custom & Galaxie Sedan
LTD Custom & Galaxie Wagon
Mustang All Models
79-82 n 77002
79-82 n 77002
79-86 n 77060
CA
3/4”
1/2”
CA
3/4”
1/2”
X
Mustang All, Except GT
87-93 n 77060
X
Mustang All Models
94-98 n 77029
RB
Mustang All, Except Cobra SVT
99-04 n 77029
RB
Mustang All, Except GT/CS California
Special, Shelby GT & GT500
Mustang All, Except GT/CS California
Special, Shelby GT & GT500
Mustang All V6 Models
Mustang All V8 Models, including GT/CS
California Special, Shelby GT & GT500
Ranger Pickup All, Except GT
05-09 n 77242
GP,JR
9/16”, 5/8”,
3/8”
11/16”
9/16”, 5/8”,
3/8”
11/16”
13, 15mm, 11/16” 1/4”, 7/16”,
1” hole saw
13, 15mm, 11/16” 1/4”, 7/16”,
1” hole saw
13mm, 11/16” 3/8”
2010 n 77243
GP,JR,X
13mm, 11/16”
3/8”
45
85706 78104
–
11-12 n 77238
11-12 n 77238
Ø,HM,JR
13mm, 11/16”
13mm, 11/16”
NO DRILL 40
NO DRILL 40
85706 78104
85706 78104
CH
Ø,GP,HB,JR
–
78058
–
n 88002
25 n 06043
25 n 06043
20
CA
See Instructions
CA
CA
45
30 n 51103
30
83-85
Ranger Pickup All, Except GT
86-92
CA,GP
n 51032 EG,V
83-85
Ranger Pickup
All, Except w/Rear Fascia
13mm, 3/4” 1/2”
n 88001
See Instructions
13mm, 3/4” 1/2”
18, 19mm,
3/4”, 7/8”
1/2”
3.5 6 30
3.5 5 20
n 33047 CA,GP
n 51032 EG,V
18, 19mm,
3/4”, 7/8”
1/2”
3.5 5 20
86-92
Ranger Pickup
93-97
n 88001
See Instructions
n 51032 EG,V
18, 19mm,
3/4”, 7/8”
1/2”
3.5 5 20
93-97
Ranger Pickup
1998
Ranger Pickup
All, Except Flareside or w/Rear Fascia
98-99
Ranger Pickup
1999
Ranger Pickup
n 88001
See Instructions
n 37042
n 51032 V
n 88001
See Instructions
45 n 37042
n 37042
n 51032 V
n 37042
n 51032 V
00-03
Ranger Pickup
00-03
Ranger Pickup
04-11
n 88001
See Instructions
45 n 37042
n 37042
n 51032 V
n 88001
See Instructions
18, 19mm, 1/2”
3/4”, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18, 19mm, 7/8” 1/2”
3.5 5
20
5
6
40
74426 78058
–
4
6
20
74179 78058
A
18, 19mm, 1/2”
3/4”, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18, 19mm, 7/8” 1/2”
3.5 5
20
5
6
40
74179 78058
A
4
6
20
74424 78013
–
18, 19mm, 1/2”
3/4”, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18, 19mm, 7/8” 1/2”
3.5 5
20
5
6
40
74424 78013
–
4 6
3.5 5
20
20
74424 78013
–
5
6
40
74424 78013
–
4 6
3.5 5
20
20
74424 78013
–
4 6
3.5 5
20
20
74665 –
A
5
6
40
74665 –
A
4 6
3.5 5
20
20
5
40
74665 –
A
n 33058 EG,SD,V
Ø
n 33058 EG,SD,V
n 33058 SD,V
n 44101 –
3.5 5 20
See Instructions
45
3.5 5 20
n 33058 SD,V
n 44101 –
45
3.5 5 20
n 33058 SD,V
n 44101 –
18, 19mm, 1/2”
3/4”, 7/8”
See Instructions
18, 19mm, 1/2”
3/4”, 7/8”
See Instructions
See Instructions
18, 19mm,
3/4”, 7/8”
1/2”
45
45
3.5 5 20
CH
n 44101 EG
18, 19mm, 1/2”
3/4”, 7/8”
See Instructions
45
–
20
n 37152 Ø
45
–
6
n 44101 EG
Ranger Pickup
30
4
n 37152
45
3.5 6
18, 19mm, 7/8” 1/2”
n 44101 EG
Ranger Pickup
1/2”
n 33058 EG,SD,V
n 37152 Ø
45
13mm, 3/4”
n 37152 Ø
n 37152 Ø
n 33058 SD,V
n 44101 –
n 37152 Ø
18, 19mm, 1/2”
3/4”, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18, 19mm, 7/8” 1/2”
18, 19mm, 1/2”
3/4”, 7/8”
18, 19mm, 7/8” 1/2”
18, 19mm,
1/2”
3/4”, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18, 19mm, 7/8” 1/2”
18, 19mm, 1/2”
3/4”, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
Ranger Pickup
04-11
Taurus Sedan All Models
86-91 n 77017
Ø,JR,KH
10, 13, 15mm, 3/4” NO DRILL 20 n 06368 Ø,GP,JR,KH 10, 13, 15mm, 3/4” NO DRILL 20
n 88002
See Instructions
45
–
78104
C
Taurus Sedan Inc. SHO
92-95 n 77017
Ø,JR
10, 13, 15mm, 3/4” NO DRILL 20 n 06368 Ø,GP,JR
n 88002
10, 13, 15mm, 3/4” NO DRILL 20
See Instructions
45
74429 78058
A
Taurus Sedan Except SHO
96-99 n 77017
Ø,JR
10, 13, 15mm, 3/4” NO DRILL 20
74657 78013
B
See Instructions
45
6
ABBREVIATIONS
JT 2WD models only.
SH Hitches produced before 09/27/07 are rated at 1200/12,000 WC & 1400/14000 WD.
SP Hitches produced before 04/27/08 are rated at 1200/12,000 WC & 1400/14000 WD.
SS Hitches produced before 03/31/08 are rated at 1000/10,000 WC & 1200/12000 WD.
SU Hitches produced before 03/11/08 are rated at 1000/10000 WC & 1200/12000 WD.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
CLASS II
CLASS I
145
MODEL
FORD
MODEL
FORD
144
REESE TOWPOWER
96-99
00-03 n 77017
FOOTNOTES
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STANDARD WIRE
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Taurus SHO
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
n 06368 Ø,GP,JR
n 88002
10, 13, 15mm, 3/4” NO DRILL 20
See Instructions
45
85243 78013
B
n 06991 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL 20
10, 13, 15mm, 3/4” NO DRILL 40
85243 78013
A
04-06
n 51101 Ø,GP,JR
n 06991 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
–
78058
A
08-09
n 51101 Ø,GP,JR
n 06301 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 30
n 44525 Ø,JR
10, 13, 15mm, NO DRILL 3.5 4
3/4”
30
78069 78058
A
Taurus Sedan Inc. SHO
10-12
n 51179 Ø,GP,JR
n 06121 GP,JR
30
30
n 44632 GP,JR
18mm, 3/4”,
7/8”
30
85711 78104
B
Taurus Wagon
86-91 n 77017
Ø,JR,KH
10, 13, 15mm, 3/4” NO DRILL 20 n 06368 Ø,GP,JR,KH 10, 13, 15mm, 3/4” NO DRILL 20
n 88002
See Instructions
45
–
78104
C
Taurus Wagon
92-95 n 77017
Ø,JR
n 88002
10, 13, 15mm, 3/4” NO DRILL 20
See Instructions
45
–
78058
A
Taurus Wagon
96-99 n 77017
Ø,JR
n 88002
10, 13, 15mm, 3/4” NO DRILL 20
See Instructions
45
–
78013
B
Taurus Wagon
00-03 n 77017
Ø,JR
n 06991 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL 20
10, 13, 15mm, 3/4” NO DRILL 40
–
–
C
Taurus Wagon
04-06
n 51101 Ø,GP,JR
n 06991 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
–
–
A
Taurus X
08-09
n 51101 Ø,GP,JR
n 06301 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 30
Thunderbird All, Except SC
Thunderbird
Transit Connect
Windstar
89-95
96-97
10-12
95-98
n 51179 Ø,GP,JR
n 06004 Ø
30
40
40
Windstar Built Before 11/2002
99-03
Windstar Built After 11/2002
FREIGHTLINER
Sprinter All 41 Wide Frames, Except 118
Wheelbase & Factory Metal Step Platform
GEO
Tracker 2 & 4 Dr.
Tracker 2 & 4 Dr.
Ø,JR
n 06004 Ø
n 06967 –
30 n 51027
–
See Instructions
3.5 4 40
n 06967 –
n 88001
30 n 51027
45 n 37042
–
See Instructions
3.5 4 40
45
n 06967 –
n 88001
2003
n 44525 Ø,JR
See Instructions
30 n 51027 –
45
See Instructions
3.5 4 40
4
4
10, 13, 15mm, NO DRILL 3.5 4
3/4”
n 44634 Ø
n 33012 –
18mm
7/8”
NO DRILL 3.5 4
1/2”
3.5 5
n 44097 –
n 33012 –
3/4
1/2”
7/8”
1/2”
n 37152 Ø,AF
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
3/4
1/2”
n 44097 –
n 33012 –
n 37152 Ø,AF
7/8”
1/2”
30
3.5 4
3.5 5
5 6
20
45
45
45
40
3.5 4
3.5 5
5 6
45
45
40
3.5 4
45
78068 78058
A
–
78104
–
78104
85707 78104
A,F
74226 –
G,MX
85290 –
G,MX
A,F
B,E
n 44097 –
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
3/4
1/2”
03-06
n 33089 Ø
18mm, 3/4”
NO DRILL 5
7.5 20
–
78104
B,F
2007
n 44576 Ø,HM
18, 19mm
NO DRILL 6
7.5 20
–
78013
B
2007
08-09
n 44591 Ø,HM
n 44576 Ø,HM
18, 19mm
NO DRILL 5
NO DRILL 6
7.5 30
7.5 20
–
–
78013
78013
B
18, 19mm
08-09
n 44591 Ø,HM
18, 19mm
NO DRILL 5
7.5 30
–
78013
B
–
78013
74896 78013
B
89-95 n 77015
96-97 n 77015
Ø,HM
See Instructions
Ø,HM
See Instructions
See Instructions
See Instructions
1/2”
20
20
B
B
ABBREVIATIONS
JT 2WD models only.
147
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL
FORD
- GEO
FORD
MODEL
- GEO
146
REESE TOWPOWER
REESE TOWPOWER
Canyon All Models
04-07
n 51074 Ø,GP
21, 22mm,
11/16”
NO DRILL 6
7.5 25
n 44593 Ø,GP
21, 22mm,
11/16”
NO DRILL 6
7.5 25
Canyon All Models
08-12
n 51074 Ø,CP,GP
21, 22mm,
11/16”
NO DRILL 6
7.5 25
n 44593 Ø,CP,GP
21, 22mm,
11/16”
NO DRILL 6
7.5 25
Envoy
1998
NO DRILL 15 n 51031 Ø,FP,HM,KK 18mm, 1-1/8” NO DRILL 4
l 37041
See Instructions
6 15
45
6 15
l 33015 Ø,FP,KK,SD 18mm, 7/8” NO DRILL 4
n 33021 Ø,FP,KK 18mm, 1-1/8” NO DRILL 4
l 37051 FP,JT,KK 3/4”
1/2”
5
n 06407 –
9/16”, 11/16”,
7/8”
n 06955 Ø,FP,GP,KK 18mm, 7/8”
3/8”
Envoy
99-01
n 06955 Ø,FP,GP,KK 18mm, 7/8”
n 88001
See Instructions
l 37041
See Instructions
45 n 37042
6 15
45
6 15
95-97
n 06955 Ø,GP
18mm, 7/8”
1998
n 06955 Ø,FP,GP,KK 18mm, 7/8”
Jimmy Downsize, All Models
99-01
2002
n 06955 Ø,FP,GP,KK 18mm, 7/8”
n 06955 Ø,FP,GP,KK 18mm, 7/8”
45
See Instructions
n 33042 –
n 33042 –
3/4”, 7/8”
1/2”
3/4”, 7/8”
1/2”
n 33042 –
n 37074 HM
3/4”, 7/8”
1/2”
7/8”
1/2”,
9/16”
1/2”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
7/8”
1/2”,
9/16”
7/8”
1/2”,
9/16”
18mm, 7/8” NO DRILL
n 51012 HM
7/8”
1/2”, 9/16” 5
7 30
n 37152
n 51012 HM
7/8”
1/2”, 9/16” 5
7 30
n 44096 HM
n 51031 Ø,HM
4
18mm, 1-1/8” NO DRILL 4
n 51031 Ø,FP,HM,KK 18mm, 1-1/8” NO DRILL 4
6 15
6 15
6 15
6 15
6 15
6 15
6 15
Pickup C/K Series w/6 ft. Bed
HM
l 33015 Ø,SD
n 33021 Ø
63-72
73-84
85-87
6 15
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
A,N
78001 78013
74682
78001 78013
74682
–
85217
B
Factory 7-Way
models only
B
Factory 7-Way
models only
A
–
–
A
74425
74425
74178
78180
78058
78058
78058
78058
A
–
A
5
6
30
5
7
30
5
7.5 30
4
6
6
6
6
15
20
30
20
–
85217
A
6
6
6
6
15
20
30
20
–
85217
A
6
6
6
6
15
20
30
20
–
85217
A
6
6
6
6
15
20
30
20
–
85217
A
–
78058
74425 78058
A
74178 78058
A
10 13 30 85741 78058
A
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
18mm, 1-1/8” NO DRILL 4
l 37041
See Instructions
l 37051 FP,JT,KK 3/4”
1/2”
5
l 37041
See Instructions
n 33021 Ø,FP,KK
18mm, 1-1/8” NO DRILL 4
l 37051 FP,JT,KK 3/4”
1/2”
5
A
A
A
See Instructions
n 33065 CQ,DX,FP
n 44108 CQ,FP,GU, 18mm, 3/4”
HM,HX
deep socket
n 44109 CQ,FP,GP, 18mm, 3/4”
GU,HX
deep socket
n 33065 CQ,DX,FP
n 44108 CQ,FP,GU, 18mm, 3/4”
HM,HX
deep socket
n 44109 CQ,FP,GP, 18mm, 3/4”
GU,HX
deep socket
Pickup C/K Series w/6 ft. Bed 2 Dr. Extended 88-00
Cab, Inc. Sportside Fenders
78009 78058
74682 85262
–
78058
5
5
5
6
l 37041
See Instructions
l 37041
n 33065 CQ,DX,FP
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
25
15
20
30
20
15
20
30
20
30
30
30
30
l 37051 FP,JT,KK 3/4”
1/2”
5
5
6
6
6
6
6
6
6
6
7.5
7.5
7.5
10
n 37051 FP,JT,KK 3/4”
1/2”
5
l 37051 JT
n 44098 Ø,HM
NO DRILL 5
n 33015 Ø,FP,KK,SD 18mm, 7/8” NO DRILL 4
n 44656
18mm, 3/4”
1/2”
5
5
6
8 30
8 40
10 30
1/2”
6
10 30
1/2”
5
6
8 40
10 30
1/2”
6
10 30
n 41909 @,EK,
HM,SS
13, 18, 19mm, 9/16”
13/16”, 15/16”
A
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
73-75
76-84
85-91
92-94
l 44569 Ø,GP,JR
30
Jimmy Full Size
Jimmy Full Size
Jimmy Full Size
Jimmy Full Size
5 25
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
07-12
07-12
78-87
WIRING
1250 lb TW 12000 lb GTW
GMC
Acadia
Acadia w/ Tow Package
Caballero
APPLICATIONS GUIDE
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
149
MODEL
GMC
MODEL
GMC
148
REESE TOWPOWER
REESE TOWPOWER
n 37096
See Instructions
n 51022 Ø,GP
See Instructions
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
See Instructions
n 51017 GP,FP
n 51016 HM,FP
n 51021 Ø,HM,J
45
12 40
5
10 20
l 37069
9/16”, 3/4”
1/2”
5
7.5 40
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
l 37094 GU
15/16”, 3/4” 5/8”
7
12 40
10 40
n 44105 Ø,GP
13, 18, 19mm, NO DRILL 5
3/4”, 7/8”
10 25
5
10 20
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
1/2”
6
10 30
1/2”
6
10 30
APPLICATIONS GUIDE
Pickup C/K Series w/8 ft. Bed w/Deep
Drop Bumper
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 51017 CQ,GP,JT
n 51016 CQ,HM,JT
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 33065 FP
5
8
30 n 41938
@
13/16”, 7/8”
10 40
n 37087 FP
3/4”, 7/8”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
n 37081 M
13, 18, 19mm, NO DRILL 5
7/8”
10 40
n 33065 FP
5
8
30 n 41938
@
13/16”, 7/8”
10 40
n 37087 FP
3/4”, 7/8”
1/2”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
n 44108 FP,GU,
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
1/2”
6
10 30
1/2”
6
10 30
n 37081 M
13, 18, 19mm, NO DRILL 5
7/8”
10 30
10 40
n 33065 FP
5
8
30 n 41938
@
13/16”, 7/8”
10 40
n 37087 FP
3/4”, 7/8”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
n 44108 FP,GU,
18mm, 3/4” 1/2”
6
deep socket
18mm, 3/4” 1/2”
6
deep socket
13, 18, 19mm, NO DRILL 5
7/8”
GU,HX
n 88001
85-87
n 88001
See Instructions
See Instructions
45 n 51017
CQ,GP,JT
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
HM,HX
n 44109 FP,GP,
GU,HX
n 37081 M
85-87
88-91
n 88001
See Instructions
45 n 51017
CQ,GP,JT
n 51016 CQ,HM,JT
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 33065 FP
10 40
n 37087 FP
3/4”, 7/8”
n 44108 FP,GU,
18mm, 3/4” 1/2”
6
deep socket
18mm, 3/4” 1/2”
6
deep socket
13, 18, 19mm, NO DRILL 5
7/8”
n 44109 FP,GP,
GU,HX
88-91
1/2”
10 40
HM,HX
Pickup C/K Series w/8 ft. Bed 4 Dr. Crew
Cab w/Deep Drop Bumper
1/2”
9/16”
FOOTNOTES
74180 –
99-00
Classic only
85741 78058
A
85741 78058
A
12 15 40 –
78058
A
78058
A
12 15 40 74425 78058
A
15 16 35
–
10 30
9/16”
STANDARD WIRE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
T-CONNECTOR
A
15 16 35
45
n 51016 CQ,HM,JT
Drop Bumper
Pickup C/K Series w/8 ft. Bed 4 Dr.
Crew Cab
DRILL BITS
10 40
n 44109 FP,GP,
82-84
73-84
WRENCHES
10 20
HM,HX
Drop Bumper
FOOTNOTES
6
63-72
73-84
HITCH
NUMBER
n 37080 Ø,FS,J
85741 78058
n 37081
M
1/2”
9/16”
74425 78058
A
12 15 40 74178 78058
A
15 16 35
10 30
10 30
74178 78058
A
12 15 40 74178 78058
A
10 30
5
8
30 n 41938
@
13/16”, 7/8”
6
10 45 n 41940
@
21mm, 13/16”, 9/16”
7/8”
9/16”
15 16 35
10 35
10 35
10 30
74178 78058
A
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
n 51017 CQ,GP,JT
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
7
GU,HX
n 51016 CQ,HM,JT
DRILL BITS
15/16”, 3/4” 5/8”
HM,HX
WIRING
1250 lb TW 12000 lb GTW
l 37034 GU
n 44109 FP,GP,
Pickup C/K Series w/6 ft. Bed Equipped w/ 88-00
Aftermarket Roll Pan
88-00
Pickup C/K Series w/6 ft. Bed Regular &
Extended Cabs, Inc. Sportside Fenders w/10 Deep
Drop Bumper
63-72
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
Pickup C/K Series w/6 ft. Bed 2 Dr. Regular 88-00
& Extended Cabs, Inc. Sportside Fenders
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
151
MODEL
GMC
MODEL
GMC
150
REESE TOWPOWER
REESE TOWPOWER
n 88001
See Instructions
45
See
Instructions
l 37069 Ø
9/16”, 3/4”
1/2”
5
7.5 40
10 40
l 37094 GU
15/16”, 3/4” 5/8”
7
12 30
5
10 20
n 44105 Ø,GP
13, 18, 19mm, NO DRILL 5
3/4”, 7/8”
18mm, 3/4” 1/2”
6
deep socket
18mm, 3/4” 1/2”
6
deep socket
10 25
5
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
See Instructions
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 51021 Ø,HM,J
5
10 30
10 30
n 37096
l 51081 Ø,RT,JL
See Instructions
21, 22mm,
3/4”
5
10 40 n 41901
@,DB,
GP,SN
18, 19mm,
13/16”, 7/8”
9/16”
10 13 30 74180 –
#,TF
3/4”
1/2”
12 14 45
l 37034 GU
l 37069 Ø
15/16”, 3/4” 5/8”
1/2”
7
5
12 40 n 45006
7.5 40
10 40
l 37094 GU
15/16”, 3/4” 5/8”
7
12 30
10 20
n 44105 Ø,GP
13, 18, 19mm, NO DRILL 5
3/4”, 7/8”
10 25
6
10 20
Ø,FS,J
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
1/2”
7
5
12 25
7.5 25
l 37094 Ø
n 37016 Ø
15/16”, 3/4” 5/8”
7
12 25
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
l 44564 Ø,JL
n 44619
99-02
n 88001
See Instructions
45 n 37096
99-02
n 88001
See Instructions
45 l 51072
Ø,RT,JL
n 37096
l 51081 Ø,RT,JL
21mm,
3/4”,7/8”
See Instructions
45 n 37096
See Instructions
13/16”, 7/8”
n 41940 @
21mm, 13/16”, 9/16”
15
7/8”
15 n 41932
Ø,@,JL
9/16”
12 15 40 –
NO DRILL 6
8
NO DRILL 6
7.5 15
21mm, 3/4”,
7/8”
45
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
1/2”
7
5
12 25
7.5 25
l 37094 Ø
n 37016 Ø
15/16”, 3/4” 5/8”
7
12 25
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
45
21mm, 3/4”
A
A
16 35
14 20 74180 85209
H
Amber bulb
15
l 33093 Ø,JL
9/16”, 3/4”
–
99-00
Classic
only
NO DRILL 7.5 12 20
NO DRILL 6 10.5 15
7.5 15
n 44619 Ø,CM
n 88001
n 41938 @
–
l 44564 Ø,JL
99-02
21mm, 3/4”
8
NO DRILL 5
See Instructions
21, 22mm,
3/4”
Ø,CM
9/16”, 3/4”
NO DRILL 6
74178 78058
45
See Instructions
A
n 36007 Ø
85-00
21mm,
3/4”,7/8”
74178 78058
10 20
n 37080
l 51072 Ø,RT,JL
A
6
10 20
10 40
92-00
74178 78058
n 37080 Ø,FS,J
9/16”, 3/4”
FOOTNOTES
99-00 Classic only
10 40
See Instructions
STANDARD WIRE
12 14 45 74180 –
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 51022 Ø,GP
n 51016 HM
T-CONNECTOR
1/2”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
See Instructions
45
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
3/4”
n 51017 GP
See Instructions
DRILL BITS
#,TF
12 30 n 45006
n 37096
WRENCHES
A
7
FP,GU,
HM,HX
FOOTNOTES
10 13 30 85741 78058
15/16”, 3/4” 5/8”
n 51017 GP
99-02
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
9/16”
NO DRILL 6
8
15 n 41932
Ø,@,JL
21mm, 7/8”
NO DRILL 12
78058
14 20 74180 78058
H
H
Amber bulb
NO DRILL 7.5 12 20
NO DRILL 6 10.5 15
NO DRILL 6
8
15
NO DRILL 6
7.5 15
–
78058
H
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
18, 19mm,
13/16”, 7/8”
l 37034 GU
GU,HX
Pickup, Sierra 1500 LD
8 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan
@,DB,
GP,SN
10 20
n 44109 FP,GP,
6.6 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan
8 ft. Bed, 2 & 4 WD
10 40 n 41901
5
n 44108
Pickup Sierra 1500 LD 6.6 ft. Bed,
2 & 4 WD
5
See Instructions
n 51021 Ø,HM,J
Pickup C/K Series w/8 ft. Bed 4 Dr. Crew
Cab, w/10 Deep Drop Bumper
Pickup C/K Series, Cab & Chassis w/34
Wide Frames
DRILL BITS
n 36007 Ø
WIRING
1250 lb TW 12000 lb GTW
n 51022 Ø,GP
n 51016 HM
Pickup C/K Series w/8 ft. Bed Equipped w/ 88-00
Aftermarket Roll Pan
88-00
Pickup C/K Series w/8 ft. Bed Regular &
Extended Cabs, w/10 Deep Drop Bumper
92-00
Pickup C/K Series w/8 ft. Bed 4 Dr.
Crew Cab
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
45 n 37096
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup C/K Series w/8 ft. Bed 2 Dr. Regular 88-00
& Extended Cabs
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
153
MODEL
GMC
MODEL
GMC
152
REESE TOWPOWER
REESE TOWPOWER
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
l 44564 Ø,JL
15 n 41932
12 25 n 45009
7.5
12
12
10.5
25
25
20
15
NO DRILL 6
8
15
NO DRILL 6
7.5 15
1/2”
99-02
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
n 44619 Ø,CM
99-02
n 88001
See Instructions
45
01-02
n 88001
See Instructions
45 l 51072
Ø,RT,JL
n 37096
l 51081 Ø,RT,JL
21mm,
3/4”,7/8”
See Instructions
45 n 37096
01-02
21, 22mm,
3/4”, 7/8”
n 37096
See Instructions
l 51073
01-02
n 88001
See Instructions
45 n 51050
Ø,RT,CS,
FS,JL,LT
SA
n 37096
FS,JL,LT
Pickup, Sierra 3500 Series 01-02
8 ft. Bed, 2 & 4 WD
See Instructions
45 n 51050 SA
l 51073 Ø,RT,CS,
FS,JL,LT
25
25
20
15
NO DRILL 6
8
15
NO DRILL 6
7.5 15
45
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
1/2”
7
5
12 25
7.5 25
l 37094 Ø
n 37016 Ø
15/16”, 3/4” 5/8”
7
12 25
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
9/16”, 3/4”
21mm, 3/4”
NO DRILL 6
8
15 n 41932
NO DRILL 5
10 20
45
21mm, 7/8”
NO DRILL 12
14 20 85217 78058
Ø,#,TF
21mm, 3/4”
NO DRILL 12
14 20
21mm, 7/8”
NO DRILL 12
14 20 74180 78058
Ø,#,TF
21mm, 3/4”
NO DRILL 12
14 20
Ø,@,JL
NO DRILL 12
NO DRILL 6
8
NO DRILL 6
7.5 15
6
12 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
H
14 20 –
85209
H
–
85209
H
15 25 74682 78058
H
NO DRILL 13
17 25
NO DRILL 5
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
45
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
21, 22mm,
3/4”, 7/8”
1/2”
21, 22mm,
3/4”
NO DRILL 6
7.5 20
FS,LT,TF
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
JL,LT
FOOTNOTES
78058
7.5 20
NO DRILL 5
H
Amber
bulb
15
1/2”
21, 22mm,
3/4”, 7/8”
H
–
NO DRILL 5
21, 22mm, 3/4” NO DRILL 5
H
Amber Bulb
NO DRILL 7.5 12 20
NO DRILL 6 10.5 15
6
15 25 74682 78058
12 20 n 41939 Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
FS,LT,TF
21mm, 7/8”
21, 22mm,
3/4”, 7/8”
JL,LT
78058
Ø,@,JL
n 44657 HM,SA
JL,LT
STANDARD WIRE
Ø,@,JL
45
See Instructions
l 51073 Ø,RT,CS,
n 88001
21, 22mm,
3/4”
21, 22mm,
3/4”, 7/8”
7.5
12
12
10.5
1/2”
15/16”, 3/4” 5/8”
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
12 25 n 45009
21mm, 3/4”,
7/8”
See Instructions
n 51050 SA
5
7
21mm, 3/4” NO DRILL 7.5
15 n 41932
l 33093 Ø,JL
n 44619 Ø,CM
n 88001
7
8
7.5 15
See Instructions
21, 22mm,
3/4”
NO DRILL 6
NO DRILL 5
l 44564 Ø,JL
01-02
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
5
7
21mm, 3/4” NO DRILL 7.5
8
–
l 44564 Ø,JL
Pickup, Sierra 2500 HD
8 ft. Bed, 2 & 4 WD
7
15/16”, 3/4” 5/8”
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
1250 lb TW 12000 lb GTW
99-02
n 37016 Ø
l 44563 Ø,JL
6.6 ft. Bed, 2 & 4 WD
NO DRILL 6
WIRING
15 25 74682 78058
H
H
ABBREVIATIONS
C 2 or 3 wire system, determine at installation.
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 44619 Ø,CM
6.6 ft. Bed, 2 & 4 WD
DRILL BITS
l 51072 Ø,RT,JL
n 37016 Ø
l 44563 Ø,JL
8 ft. Bed, 2 & 4 WD
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
99-02
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
6.6 ft. Bed, 2 & 4 WD
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
155
MODEL
GMC
MODEL
GMC
154
REESE TOWPOWER
REESE TOWPOWER
8 ft. Bed, 2 & 4 WD
03-04
See Instructions
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
7
12 25 n 45009
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
n 37016 Ø
l 44563 Ø,JL
21mm, 3/4”
l 44564 Ø,JL
n 44619 Ø,CM
21mm, 3/4”, 7/8” NO DRILL
5
7
7.5
6
6
6
7.5
12
12
10.5
8
7.5
1/2”
15/16”, 3/4” 5/8”
NO DRILL
21, 22mm, 3/4” NO DRILL
21, 22mm, 3/4” NO DRILL
8
15 n 41932
21mm, 7/8”
NO DRILL 12
14 20 74682 78058
Ø,#,TF
21mm, 3/4”
NO DRILL 12
14 20
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm, 3/4” NO DRILL 6
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
7
5
15/16”, 3/4” 5/8”
7
21mm, 3/4” NO DRILL 7.5
21, 22mm, 3/4” NO DRILL 6
9/16”, 3/4”
1/2”
7/8”
21, 22mm, 3/4” NO DRILL 6
n 88001
See Instructions
45 l 51072
Ø,RT,JL
n 37096
l 51081 Ø,RT,JL
03-05
n 88001
See Instructions
45 n 37096
03-05
n 88001
See Instructions
45 l 51072
21mm,
3/4”,7/8”
21, 22mm,
3/4”
21mm, 7/8”
NO DRILL 12
14 20 74682 78058
12
7.5
12
12
10.5
8
25 n 45009
25
25
20
15
15
Ø,#,TF
21mm, 3/4”
NO DRILL 12
14 20
7.5 15
21mm, 3/4”,
7/8”
45
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
1/2”
7
5
12 25
7.5 25
l 37094 Ø
n 37016 Ø
15/16”, 3/4” 5/8”
7
12 25
Ø,RT,JL
n 37096
l 51081 Ø,RT,JL
21mm,
3/4”,7/8”
l 44563 Ø,JL
l 44564 Ø,JL
NO DRILL 7.5 12 20
21, 22mm, 3/4” NO DRILL 6 10.5 15
21mm, 3/4”, 7/8” NO DRILL 6 8 15
n 44619 Ø,CM
21, 22mm, 3/4” NO DRILL 6
See Instructions
45 n 37096
03-05
n 88001
See Instructions
45 l 51072
21mm, 3/4”,
7/8”
45
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
1/2”
7
5
12 25
7.5 25
l 37094 Ø
n 37016 Ø
15/16”, 3/4” 5/8”
7
12 25
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
n 37096
l 51081 Ø,RT,JL
21mm,
3/4”,7/8”
21mm, 3/4”
8
15 n 41932
NO DRILL 6
8
N
74682 78058
N
Ø,@,JL
21mm, 7/8”
NO DRILL 12
14 20 74682 78058
N
74682 78058
N
14 20 74682 78058
N
15
NO DRILL 6
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
45
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
1/2”
7
5
12 25
7.5 25
l 37094 Ø
n 37016 Ø
15/16”, 3/4” 5/8”
7
12 25
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
n 44619 Ø,CM
14 20 74682 78058
NO DRILL 7.5 12 20
NO DRILL 6 10.5 15
7.5 15
l 44564 Ø,JL
9/16”, 3/4”
NO DRILL 6
NO DRILL 5
See Instructions
21, 22mm,
3/4”
NO DRILL 12
45
See Instructions
Ø,RT,JL
21mm, 7/8”
N
7.5 15
l 33093 Ø,JL
n 44619 Ø,CM
n 88001
Ø,@,JL
74682 78058
21mm, 3/4”
7.5 15
l 44564 Ø,JL
03-05
15 n 41932
NO DRILL 5
See Instructions
21, 22mm,
3/4”
8
45
See Instructions
N
Ø,@,JL
l 33093 Ø,JL
9/16”, 3/4”
N
15 n 41932
7.5 15
See Instructions
74682 78058
8
NO DRILL 5
NO DRILL 6
FOOTNOTES
25
25
20
15
15
15
03-04
03-05
N
9/16”, 3/4”
21mm, 3/4”
NO DRILL 6
8
15 n 41932
NO DRILL 7.5 12 20
NO DRILL 6 10.5 15
NO DRILL 6
8
15
NO DRILL 6
7.5 15
Ø,@,JL
21mm, 7/8”
NO DRILL 12
ABBREVIATIONS
long bed trucks.
C 2 or 3 wire system, determine at installation.
G Low-side switching system.
JT 2WD models only.
MX Multiplexed wiring system.
APPLICATIONS GUIDE
l 51072 Ø,RT,JL
STANDARD WIRE
Ø,@,JL
03-04
03-04
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
10.5 15
n 44619 Ø,CM
8 ft. Bed, 2 & 4 WD
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
NO DRILL 6
l 44563 Ø,JL
l 44564 Ø,JL
6.6 ft. Bed, 2 & 4 WD
DRILL BITS
21, 22mm,
3/4”
NO DRILL 6
WIRING
1250 lb TW 12000 lb GTW
Ø,RT,JL
l 37094 Ø
n 37016 Ø
6.6 ft. Bed, 2 & 4 WD
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
45 l 51081
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 88001
CLASS III/IV
CLASS III
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
6.6 ft. Bed, 2 & 4 WD
APPLICATIONS GUIDE
CLASS II
CLASS I
157
MODEL
GMC
MODEL
GMC
156
REESE TOWPOWER
REESE TOWPOWER
03-06
n 88001
See Instructions
45 n 51050
SA
8 ft. Bed, 2 & 4 WD
03-06
n 88001
See Instructions
45 n 51050
Ø,RT,CS,
FS,JL,LT
SA
6
12 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
JL,LT
NO DRILL 13
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
45
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
JL,LT
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
l 51073 Ø,RT,CS,
21, 22mm,
3/4”
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
l 51072
Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093
21mm, 7/8”
NO DRILL 12
14 20 74682 78058
N
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069
l 37094 Ø
9/16”, 3/4”
74682 78058
N
14 20 74682 78058
N
74682 78058
N
14 20 74682 78058
N
74682 78058
N
14 20 74682 78058
N
Ø,RT,JL
n 37096
l 51081 Ø,RT,JL
JL,LT
Ø,JL
21mm,
3/4”,7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
7
5
7
21mm, 3/4” NO DRILL 7.5
15 n 41932
Ø,@,JL
25
25
20
15
NO DRILL 6
8
15
NO DRILL 6
7.5 15
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
45
10.5 15
l 37034 Ø
l 37069 Ø
15/16”, 3/4” 5/8”
NO DRILL 6
1/2”
7
5
12 25
7.5 25
l 37094 Ø
l 44563 Ø,JL
15/16”, 3/4” 5/8”
7
12 25
10.5 15
8 15
See Instructions
21, 22mm,
3/4”
2006
n 88001
See Instructions
45 n 37096
2006
n 88001
See Instructions
45 l 51072
9/16”, 3/4”
NO DRILL 6
21, 22mm, 3/4” NO DRILL 6
7/8”
8
15 n 41932
Ø,@,JL
21mm, 7/8”
NO DRILL 12
45
See Instructions
Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
l 44563 Ø,JL
l 44564 Ø,JL
NO DRILL 6
7
5
7
21, 22mm, 3/4” NO DRILL 6
1/2”
15/16”, 3/4” 5/8”
7/8”
8
15 n 41932
Ø,@,JL
21mm, 7/8”
NO DRILL 12
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
l 44564 Ø,JL
NO DRILL 6
7.5
12
10.5
8
25
25
15
15
8
15 n 41932
7
12 25
5
7
NO DRILL 6
7.5 25
12 25
10.5 15
NO DRILL 6
8
1/2”
15/16”, 3/4” 5/8”
N
12 25
2006
l 51072 Ø,RT,JL
15 25 74682 78058
12 25
7.5
12
12
10.5
1/2”
15/16”, 3/4” 5/8”
3/4”
21mm, 3/4”,
7/8”
21, 22mm,
3/4”
8
NO DRILL 5
l 44564 Ø,JL
N
10 20
45 l 51072
2006
15 25 74682 78058
NO DRILL 5
SA
FS,LT,TF
04-05
See Instructions
17 25
NO DRILL 5
n 44619 Ø,CM
n 88001
N
7.5 20
l 44564 Ø,JL
2006
15 25 74682 78058
NO DRILL 5
n 37016 Ø
l 44563 Ø,JL
6.6 ft. Bed, 2 & 4 WD
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
1/2”
Ø
5.8 ft. Bed, 2 & 4 WD
DRILL BITS
21, 22mm,
3/4”, 7/8”
FS,LT,TF
6.6 ft. Bed, 2 & 4 WD
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
STYLE
n 44657 HM,SA
7.5 20
45 n 51050
04-05
N
NO DRILL 5
FS,JL,LT
5.8 ft. Bed, 2 & 4 WD
74682 78058
15
Ø,@,JL
21mm, 7/8”
NO DRILL 12
ABBREVIATIONS
DX Requires six 3/8" spacer blocks (#01077-011 and six 1/2-13 x 2-1/4 GRS
carriage bolts (#01266-009), which are not provided (sold separately).
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
1250 lb TW 12000 lb GTW
21, 22mm,
3/4”
21, 22mm,
3/4”, 7/8”
FS,JL,LT
See Instructions
21, 22mm,
3/4”
21, 22mm,
3/4”, 7/8”
10 20
45
See Instructions
l 51073 Ø,RT,CS,
n 88001
NO DRILL 5
See Instructions
n 37096
Pickup, Sierra 3500 Series 03-06
8 ft. Bed, 2 & 4 WD
21, 22mm,
3/4”, 7/8”
WIRING
45
See Instructions
n 37096
l 51073
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 37096
03-05
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
6.6 ft. Bed, 2 & 4 WD
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
159
MODEL
GMC
MODEL
GMC
158
REESE TOWPOWER
REESE TOWPOWER
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069
l 37094 Ø
9/16”, 3/4”
l 51072 Ø,RT,JL
2006
2007
n 88001
See Instructions
45 n 37096
21mm,
3/4”,7/8”
NO DRILL 5
See Instructions
21, 22mm,
3/4”
NO DRILL 6
2007
n 88001
See Instructions
45 n 37096
2007
n 88001
See Instructions
45 l 51072
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
45
l 37034 Ø
15/16”, 3/4” 5/8”
7
12 25 n 41932
10.5 15
l 37069 Ø
9/16”, 3/4”
1/2”
5
7.5 25
l 37094 Ø
l 44563 Ø,JL
15/16”, 3/4” 5/8”
7
NO DRILL 6
12 25
10.5 15
NO DRILL 6
8
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
7.5
12
10.5
8
25
25
15
15
8
15
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
7
12 25
l 37069 Ø
l 44563 Ø,JL
9/16”, 3/4”
1/2”
5
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
NO DRILL 6
7.5 25
10.5 15
NO DRILL 6
8
n 88001
See Instructions
45 l 51072
NO DRILL 6
Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
l 37069 Ø
l 37094 Ø
9/16”, 3/4”
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
n 88001
See Instructions
45
n 88001
See Instructions
45 l 51072
NO DRILL 6
8
8
15 n 41932
15 n 41932
7
12 25
5
7
NO DRILL 6
7.5 25
12 25
10.5 15
NO DRILL 6
8
1/2”
15/16”, 3/4” 5/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 37034 Ø
15/16”, 3/4” 5/8”
7
12 25
l 37069 Ø
l 44563 Ø,JL
9/16”, 3/4”
1/2”
5
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
NO DRILL 6
7.5 25
10.5 15
NO DRILL 6
8
l 44564 Ø,JL
See Instructions
45
2007
n 88001
See Instructions
45 n 51050
SA
n 37096
21, 22mm,
3/4”, 7/8”
NO DRILL 5
FS,JL,LT
21, 22mm,
3/4”
10 20
45
See Instructions
l 51073 Ø,RT,CS,
NO DRILL 5
7.5 20
NO DRILL 6
Ø,@,JL
21mm, 7/8”
NO DRILL 12
8
Ø,@,JL
21mm, 7/8”
NO DRILL 12
Ø,@,JL
21mm, 7/8”
NO DRILL 12
15 n 41932
Ø,@,JL
21mm, 7/8”
NO DRILL 12
FOOTNOTES
N
14 20 85262 78058
BN,N
85262 78058
BN,N
14 20 85262 78058
BN,N
85262 78058
BN,N
14 20 85262 78058
BN,N
85262 78058
BN,N
14 20 85262 78058
BN,N
85262 78058
BN,N
15 25 85262 78058
BN,N
15
n 44657 HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
JL,LT
STANDARD WIRE
74682 78058
15
21mm,
3/4”,7/8”
n 88001
N
15
Ø,RT,JL
2007
14 20 74682 78058
45
See Instructions
NO DRILL 5
45
NO DRILL 12
15
21mm,
3/4”,7/8”
See Instructions
21mm, 7/8”
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
l 33093 Ø,JL
7.5 15
1/2”
15/16”, 3/4” 5/8”
Ø,@,JL
N
12 25
Ø,RT,JL
n 88001
15 n 41932
l 44563 Ø,JL
l 44564 Ø,JL
l 44564 Ø,JL
2007
6.6 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan (Classic)
2007
7
8
5
7
21, 22mm, 3/4” NO DRILL 6
l 44564 Ø,JL
2007
5.8 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan (Classic)
2007
NO DRILL 6
74682 78058
NO DRILL 13
17 25
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
DRILL BITS
l 51072 Ø,RT,JL
l 44564 Ø,JL
8 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan (Classic)
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
2006
l 51081 Ø,RT,JL
(Classic)
WIRING
1250 lb TW 12000 lb GTW
2006
Ø
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
8 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
161
MODEL
GMC
MODEL
GMC
160
REESE TOWPOWER
REESE TOWPOWER
SA
l 51073 Ø,RT,CS,
FS,JL,LT
n 37096
Pickup, Sierra 3500 Series 2007
n 88001
See Instructions
45 n 51050
SA
l 51073 Ø,RT,CS,
FS,JL,LT
l 51073 Ø,RT,CS,
07-10
FS,JL,LT
7.5 20
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293 Ø,#,CS,
18, 21mm
NO DRILL 18
18 25
21, 22mm,
3/4”, 7/8”
NO DRILL 5
21, 22mm,
3/4”
NO DRILL 5
21, 22mm,
3/4”
NO DRILL 5
JL,LT
45
FS,LT,TF
10 20
l 44657
Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
7.5 20
l 44577 Ø,CS,FS,
21, 22mm,
3/4”
NO DRILL 6
7.5 20
JL,LT
l 44577 Ø,CS,FS,
JL,LT
21, 22mm,
3/4”
NO DRILL 6
12 20 n 41939
Ø,@,CS,
FS,LT
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
11 20 n 45022
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 13
17 25
n 45293
Ø,#,CS,
FS,LT,TF
18, 21mm
NO DRILL 18
18 25
11 20 n 41939 Ø,@,CS,
FS,LT
FS,LT,TF
FS,JL,LT
21, 22mm,
3/4”
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
JL,LT
21, 22mm,
3/4”
NO DRILL 6
11 20 n 41939
Ø,@,CS,
FS,LT
n 88001
See Instructions
45 l 51073
Ø,RT,CS,
FS,JL,LT
21, 22mm,
3/4”
NO DRILL 5
7.5 20
l 44577 Ø,CS,FS,
7.5 20
l 44577 Ø,CS,FS,
JL,LT
21, 22mm,
3/4”
NO DRILL 6
07-10
FS,JL,LT
21, 22mm,
3/4”
NO DRILL 5
JL,LT
21, 22mm,
3/4”
NO DRILL 6
NO DRILL 13
17 25
NO DRILL 18
18 25
11 20 n 41939
Ø,@,CS,
FS,LT
11 20 n 41939 Ø,@,CS,
FS,LT
n 45022 Ø,#,CS,
07-12
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
NO DRILL 6
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
10.5 15
NO DRILL 6
8
15
NO DRILL 6
8
15
21, 22mm,
3/4”
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
NO DRILL 6
10.5 15
NO DRILL 6
8
15
NO DRILL 6
8
15
l 44564
07-12
Ø,JL
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
07-12
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL 5
7.5 15
l 33093 Ø,JL
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL 6
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
11-12
11-12
n 44653 Ø,CS,FS,
GP,JL,LT
n 44653 Ø,CS,FS,
GP,JL,LT
3/4”
7/8”
13, 21, 22mm, NO DRILL 8
3/4”, 7/8”
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
18, 21mm
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
17 25
n 45293 Ø,#,CS,FS,LT,TF 18, 21mm
NO DRILL 18
18 25
11-12
n 44653 Ø,CS,FS,
GP,JL,LT
n 44653 Ø,CS,FS,
GP,JL,LT
BN,N
BN,N
BN,N
85262 78058
BN,N
85262 78058
BN,N
15 16 20 85262 78058
BN,N
10.5 15
8
15
12 20 n 41942
Ø,@,CS,FS, 13, 21, 22mm, NO DRILL
GP,JL,LT
3/4”, 7/8”
n 45300 #,CS,FS,HM, 13, 19, 21,
JL,KH,LT
22mm, 3/4”,
7/8”
12 20 n 41942 Ø,@,CS,FS, 13, 21, 22mm,
GP,JL,LT
3/4”, 7/8”
18 20
3/8”,
18
9/16”
hole saw
NO DRILL 15
18 20
13, 21, 22mm, NO DRILL 8
3/4”, 7/8”
13, 19, 21,
22mm, 3/4”,
7/8”
12 20 n 41942 Ø,@,CS,FS, 13, 21, 22mm,
GP,JL,LT
3/4”, 7/8”
3/8”,
18
9/16”
hole saw
NO DRILL 15
18 20
13, 21, 22mm, NO DRILL 8
3/4”, 7/8”
n 45300 #,CS,FS,HM, 13, 19, 21,
JL,KH,LT
22mm, 3/4”,
7/8”
12 20 n 41942 Ø,@,CS,FS, 13, 21, 22mm,
GP,JL,LT
3/4”, 7/8”
n 45300 Ø,#,CS,FS,
HM,JL,LT
BN,N
85262 78058
15
HM,JL,LT
11-12
15 25 85262 78058
3/8”,
18
9/16”
hole saw
NO DRILL 15
13, 21, 22mm, NO DRILL 8
3/4”, 7/8”
BN,N
17 25
NO DRILL 13
n 45300 Ø,#,CS,FS,
NO DRILL 13
15 25 85262 78058
18, 21mm
FS,LT,TF
15 25 85262 78058
18, 21mm
FS,LT,TF
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
BN,N
17 25
18, 21mm
n 45022 Ø,#,CS,
l 51073 Ø,RT,CS,
NO DRILL 13
n 45293 Ø,#,CS,
FS,LT,TF
07-10
18, 21mm
15 25 85262 78058
n 45022 Ø,#,CS,
FS,LT,TF
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
15 25 85262 78058
BN,N
13, 19, 21,
22mm, 3/4”,
7/8”
3/8”,
9/16”
hole saw
16 20 85262 78058
16 20 85262 78058
16 20 85262 78058
18 18 20
BN,N
BN,N
BN,N
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
l 51073 Ø,RT,CS,
07-10
15 25 85262 78058
FOOTNOTES
3/4”
See Instructions
STANDARD WIRE
18, 21, 22mm, NO DRILL 12
13/16”, 7/8”
T-CONNECTOR
Ø,@,CS,
FS,LT
DRILL BITS
12 20 n 41939
WRENCHES
6
HITCH
NUMBER
1/2”
DRILL BITS
21, 22mm,
3/4”, 7/8”
STYLE
n 44657 Ø,HM,SA
DRILL BITS
10 20
21, 22mm,
3/4”, 7/8”
n 45022 Ø,#,CS,
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
1250 lb TW 12000 lb GTW
NO DRILL 5
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
45 n 51050
WIRING
WRENCHES
See Instructions
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 88001
CLASS V
FOOTNOTES
2007
STYLE
YEAR
MODEL
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
163
MODEL
GMC
MODEL
GMC
162
REESE TOWPOWER
REESE TOWPOWER
Pickup, Sierra Cab & Chassis 3500
Series w/34 Wide Frames (Classic)
n 44653 Ø,CS,FS,
11-12
GP,JL,LT
13, 21, 22mm, NO DRILL 8
3/4”, 7/8”
01-07
APPLICATIONS GUIDE
45
83-84
18 20
n 41938 @,CC
n 41940 @
9/16”
12
15
15 40
16 35
35 n 37042
See Instructions
45
n 33053 Ø,GU
n 37152 CN,GU,SB 15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
13/16”, 7/8”
21mm, 13/16”, 9/16”
7/8”
3/4”
17/32”
13/16”, 7/8”
9/16”
21mm, 13/16”, 9/16”
7/8”
12
12
15
30 85262 78058
30 85262 78058
FOOTNOTES
BN,N
BN,N
15 40
16 35
78058
–
–
78058
–
74178 78058
BN
74178 78058
BN
74178 78058
BN
74178 78058
BN
74216 78058
BN
3.5 5 20
74216 78058
BN
18mm, 3/4”, 7/8”
n 88001
See Instructions
45 n 37096
See Instructions
45
See Instructions
45
–
STANDARD WIRE
3/8”,
18
9/16”
hole saw
17/32” 12
–
n 06958 Ø,GU,HM,
RH
T-CONNECTOR
n 45300 #,CS,FS,HM, 13, 19, 21,
JL,KH,LT
22mm, 3/4”,
7/8”
n 41936 @
3/4”
BN,N
See Instructions
3.5 6
45
5
40
6
85-94
n 88002
n 88001
See Instructions
S-15 & Sonoma Pickup
w/Standan Box & Step Bumper
See Instructions
45
45 n 37096
85-94
n 88002
See Instructions
n 37042
45 n 37096
See Instructions
S-15 & Sonoma Pickup w/
Rear Fascia & No Step Bumper
w/Standan Box & Step Bumper, Inc. ZR2 &
Highlander Pkg.
See Instructions
45
45
85-97
n 06958 Ø,GU,HM,
18mm, 3/4”, 7/8” –
35 n 37042
See Instructions
45
n 33053 Ø,GU
3.5 6
45
n 88001
See Instructions
45 n 37096
See Instructions
45
40
94-97
n 37096
See Instructions
45
n 37152 CN,GU,SB 15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
n 33055 Ø,†
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
96-97
n 37096
See Instructions
45
98-99
n 37096
See Instructions
45
98-04
n 51063 CN,GP,GU
See Instructions
n 37096
n 37096
See Instructions
See Instructions
45
45
74216 78058
BN
n 37096
See Instructions
45
74216 78058
BN
S-15 & Sonoma Pickup w/
Rear Fascia & No Step Bumper
w/Sportside Box & Non-Towing Bumper
w/Rear Fascia & No Step Bumper
All, Except Sportside Box w/Non-Towing Bumper &
Standan Box w/Rear Fascia
98-04
98-04
w/Sportside Box & Non-Towing Bumper
98-04
w/Standan Box & Step Bumper, Inc. ZR2, Highlander
Pkg. & Crew Cab
S-15 Jimmy
Downsize, All Models
S-15 Jimmy
Downsize, 2 Dr.
S-15 Jimmy
Downsize, 4 Dr.
S-15 Jimmy
Downsize, All Models
Safari Standard Body
RH
n 33055 Ø,†
See Instructions
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
n 06958 Ø,GU,RH
18mm, 3/4”, 7/8” –
35 n 37042
See Instructions
45
n 37152 AF,CN,GU,ST 15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
n 88001
n 88002
See Instructions
45
n 44062 CN,GU
n 33014 Ø
3/4”
See Instructions
45 n 37096
45
See Instructions
1983
84-91
n 88002
See Instructions
45
40
40
6
40
74216 78058
BN
18mm
NO DRILL 3.5 5
NO DRILL 3.5 6
20
60
74427 78058
BN
n 33014 Ø
18mm
NO DRILL 3.5 6
60
74427 78058
BN
84-91
n 33014 Ø
18mm
NO DRILL 3.5 6
60
74427 78058
BN
92-94
n 33014 Ø
18mm
NO DRILL 3.5 6
60
–
78058
–
n 33057 Ø,CR,HM
Ø
n –
15, 17mm, 3/4” NO DRILL 3.5 6
45
30
–
78058
–
85-94
n 06227 Ø,CR,HM
n 06037 Ø,GP,HC
14, 15mm
14, 15mm
NO DRILL 30
NO DRILL 30
5
3.5 6
ABBREVIATIONS
JT 2WD models only.
RT
APPLICATIONS GUIDE
See Instructions
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
16 20 85262 78058
n 41938 @,CC
n 41940 @
n 37096
DRILL BITS
NO DRILL 15
Ø,@,CS,FS, 13, 21, 22mm,
GP,JL,LT
3/4”, 7/8”
n 41936 @
83-84
WRENCHES
FOOTNOTES
HITCH
NUMBER
12 20 n 41942
Pickup, Sierra Cab & Chassis 3500 HD 07-12
w/34 Wide Frames (New Body Style)
w/Standan Box & Step Bumper
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
CLASS V
500-750 lb TW 5000-7000 lb GTW
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup, Sierra Denali HD
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
165
MODEL
GMC
MODEL
GMC
164
REESE TOWPOWER
REESE TOWPOWER
Savana Van Full Size
90-05
96-99
2003
04-08
04-12
14, 15mm
NO DRILL 30 n 37042
n 88001
See Instructions
45 n 37096
n 06099 Ø,HM
15 n 51023
See Instructions
See Instructions
n 06099 Ø,HM
See Instructions
n 06099 Ø,HM
n 88001
45 n 37042
n 37096
l 37041
15 n 51023
n 06099 Ø,HM
Ø,HM
n 33057 CR,HM
See Instructions
45
n 37152 AF
See Instructions
45
n 44010 Ø,CS,GP
n 33057 Ø,CS,GP
3/4”, 7/8”
NO DRILL 5
10 15
45
45
See Instructions
See Instructions
3/4”, 7/8”
NO DRILL 5
45
10 15
n 37004 Ø,HM
l 37051 HM
n 37152 HM
n 44028 Ø,HM
n 37004 Ø,HM
NO DRILL 3.5 6
3/4”
1/2”
NO DRILL 5
3/4”
1/2”
See Instructions
l 37041
15 n 51023 Ø,HM
See Instructions
45 n 37042
n 37096
See Instructions
See Instructions
45
45
l 37051 HM
n 37152 HM
l 37041
l 37041
See Instructions
45
n 44028 Ø,HM
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
10 15
n 37004 Ø,HM
3/4”
NO DRILL 5
l 37051 HM
n 37152 HM
3/4”
1/2”
15 n 51023
3/4”, 7/8”
NO DRILL 5
45
10 15
n 44028 Ø,HM
n 37004 Ø,HM
3/4”
NO DRILL 5
3/4”
1/2”
Ø,HM
3/4”, 7/8”
NO DRILL 5
See Instructions
See Instructions
n 33055 Ø,†
73-84
85-91
92-99
n 44605
n 44605
See Instructions
7/8”
10-12
99-10
5
n 37042
See Instructions
n 37074 HM
n 37096
See Instructions
n 37152 –
n 51012 HM
7/8”
1/2”, 9/16” 5
7 30
n 44096 HM
n 51012 HM
7/8”
1/2”,
9/16”
5
7 30
n 44656 HM
18, 19mm,
3/4”
NO DRILL 3.5 4
n 06391 Ø,HM
18, 19mm, 3/4”
n 51185 Ø,HM
18, 19mm, 3/4”
NO DRILL 25
30
5
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
92-93
See Instructions
5
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
13/16”,
15/16”
35 n 45007 Ø,#,HM,TF 3/4”
@,HM
9/16”
10 12 35 74659 78013
HG
NO DRILL 12
14 45
30
13/16”,
15/16”
35 n 45007 Ø,#,HM,TF 3/4”
@,HM
9/16”
10 12 35 85246 78013
NO DRILL 12
HG
14 45
30
10 30
10 20 n 41921
6
6
–
30
30
10 30
10 20 n 41921
6
6
78058
65
10 20 n 41921
6
6
FOOTNOTES
HITCH
NUMBER
–
45
13/16”,
15/16”
35 n 45007 Ø,#,HM,TF 3/4”
@,HM
9/16”
10 12 35 78029 78058
NO DRILL 12
–
14 45
30
10 30
See Instructions
n 37042
n 37096
See Instructions
45
45
Sonoma GT
Suburban
Suburban
Suburban
Terrain All, Except V6 Models
Topkick C4500
Cab & Chassis w/34 Wide Frames
Topkick C5500
Topkick C6500
Topkick C7500
Topkick C8500
5
3/4”
n 44028 Ø,HM
n 33055 Ø,GP
91-92
10-12
NO DRILL 5
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
3/4”, 7/8” NO DRILL 5
92-93
Syclone
Terrain All Models
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
15, 17mm,
3/4”
3/4”
Sonoma GT
n 88001
DRILL BITS
15, 17mm, 3/4” 1/2”,
3.5 6
9/16”
15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
15, 17mm
NO DRILL 3.5 6
45 n 37042
n 37096
See Instructions
l 37051 HM
n 37152 HM
WRENCHES
FOOTNOTES
30
NO DRILL 3.5 6
See Instructions
Ø,HM
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
n 06037 Ø,GP,HC
n 88001
HITCH
NUMBER
15, 17mm
n 88001
INSTALL TIME
STYLE
NO DRILL 30 n 51029 Ø,CS,GP
WIRING
1250 lb TW 12000 lb GTW
10 20 n 41921
6
6
1/2”,
9/16”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
7/8”
1/2”,
9/16”
7/8”
1/2”,
9/16”
9/16”
10 12 35 78029 78058
NO DRILL 12
–
14 45
30
10 30
40
74178 78058
–
40
74178 78058
–
5
5
6
7.5 40
7.5 40
10 30
74225 78058
74178 78058
74180 78058
BN
5
6
30
5
7
30
5
7.5 30
74178 78058
85716 78104
BN
85716 78104
–
15 16 35 –
CH
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
13, 18, 19mm, NO DRILL 3.5 6
3/4”, 7/8”
See Instructions
13/16”,
15/16”
35 n 45007 Ø,#,HM,TF 3/4”
@,HM
n 44637 Ø,HM
18, 19mm, 3/4” NO DRILL 3.5 4
30
n 44630 Ø,†,HM
18, 19mm, 3/4” NO DRILL 3.5 4
30
BN
BN
CH
n 41940 @
21mm, 13/16”, 9/16”
7/8”
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
99-10
n 41940 @
21mm, 13/16”, 9/16”
7/8”
15 16 35 –
–
–
78058
–
78-86
n 35365 Ø,BF,CV
n 44011 Ø,BF,CV
See Instructions
See Instructions
5
5
10 30
7.5 45
–
–
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
00-02
DRILL BITS
14, 15mm
CLASS V
500-750 lb TW 5000-7000 lb GTW
n 06227 Ø,CR,HM
n 88001
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Safari Extended Body
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
167
MODEL
GMC
MODEL
GMC
166
REESE TOWPOWER
REESE TOWPOWER
Van, G-Series
Vandura & Rally Full Size w/Lo-Mount Taillights
1996
Yukon Old Body Style
92-00
n 88001
See Instructions
45 n 37042
n 37096
n 51012 HM
n 51012 HM
Yukon New Body Style w/Amber Turn Signals 00-02
n 88001
See Instructions
45 n 37042
n 37096
See Instructions
45 n 37042
n 37096
n 44011 Ø,BF,CV
n 37074 HM
n 37152
n 44096 HM
n 44656 HM
See Instructions
7 30
7 30
45
45
10 15
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
7/8”
7/8”
1/2”, 9/16” 5
1/2”, 9/16” 5
See Instructions
See Instructions
See Instructions
45
45
n 37072 Ø,CN,HM
n 37152
n 51041 Ø,CN,HM
10 15
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
n 37042
n 51012 HM
See Instructions
7/8”
1/2”, 9/16” 5
45
7 30
n 37074 HM
n 37152 –
n 51012 HM
7/8”
1/2”, 9/16” 5
7 30
n 44096 HM
n 44656 HM
n 37042
See Instructions
n 51041 Ø,CN,HM
n 88001
See Instructions
n 51041 Ø,CN,HM
TW
00-02
10 15
900
03-06
n 88001
See Instructions
n 37042
n 51041 Ø,CN,HM
See Instructions
10 15
900
Yukon XL Denali
01-02
n 37042
n 51041 Ø,CN,HM
See Instructions
10 15
lb
22mm, 7/8”
1/2”, 9/16” 5
NO DRILL 6
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
22mm, 7/8”
22mm, 7/8”
NO DRILL 6
NO DRILL 6
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
22mm, 7/8”
NO DRILL 6
1/2”, 9/16” 6
7/8”
1/2”, 9/16” 5
NO DRILL 6
22mm, 7/8”
n 37152 –
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
n 37072 Ø,CN,HM
n 37152 –
n 37072 Ø,CN,HM
n 37152 –
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
n 37072 Ø,CN,HM
n 37152 –
90
22mm, 7/8”
NO DRILL 6
NO DRILL 6
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
22mm, 7/8”
22mm, 7/8”
NO DRILL 6
NO DRILL 6
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
22mm, 7/8”
22mm, 7/8”
NO DRILL 6
NO DRILL 6
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
22mm, 7/8”
0
lb
22mm, 7/8”
TW
NO DRILL 6
7
7.5
10
6
30
30
20
30
10
10
10
6
20
15
20
30
10
10
10
6
20
15
30
30
7 30
7.5 30
10 20
lb
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
7.5 45
10 30
6 30
n 37072 Ø,CN,HM
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
DRILL BITS
5
1/2”, 9/16” 6
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
7/8”
1/2”, 9/16” 5
7/8”
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
7/8”
1/2”, 9/16” 5
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
TW
Yukon XL All Styles
lb
See Instructions
7/8”
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
Yukon XL All Styles
See Instructions
10 30
7.5 45
10 30
7/8”
n 37072 Ø,CN,HM
n 37152
10 15
WRENCHES
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
STYLE
n 35365 Ø,BF,CV
5
5
5
See Instructions
74486 78058
–
74486 78058
–
74180 78058
BN
74682 78058
BN,N
74682 78058
BN,N
74180 78058
BN,N
lb
74682 78058
N
74682 78058
N
74682 78058
N
74682 78058
N
TW
0
01-02
See Instructions
See Instructions
90
99-00
45
45
See Instructions
n 35365 Ø,BF,CV
n 44011 Ø,BF,CV
0
Yukon Denali
New Body Style w/Amber Turn Signals
n 88001
See Instructions
5 7.5 30
5 7.5 30
TW
6
30
10
10
10
6
20
15
20
30 n 41930
10
10
10
6
10
10
10
6
@,CN
22mm, 13/16”, 1/2”
7/8”, 3/4”
10 12 35
20 n 45013
15
20
30 n 41930
#,TF
21mm, 3/4”
1/2”
12 14 50
@,CN
22mm, 13/16”, 1/2”
7/8”, 3/4”
10 12 35
20 n 45013
15
20
30 n 41930
#,TF
21mm, 3/4”
1/2”
12 14 50
@,CN
22mm, 13/16”, 1/2”
7/8”, 3/4”
10 12 35
10 20 n 45013
10 15
#,TF
21mm, 3/4”
12 14 50
1/2”
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
Yukon New Body Style w/Amber Turn Signals 03-06
See Instructions
WIRING
1250 lb TW 12000 lb GTW
90
APPLICATIONS GUIDE
n 51041 Ø,CN,HM
Yukon Denali Old Body Style
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
87-95
n 51003 BF
n 51003 BF
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
169
MODEL
GMC
MODEL
GMC
168
REESE TOWPOWER
REESE TOWPOWER
NO DRILL
11/16”, 3/4”
9/16”
n 51167 Ø,HR,JR
03-05 n 77161 Ø,HR,JR
n 51167 Ø,HR,JR
11/16”, 3/4”
9/16”
11/16”, 3/4”
9/16”
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Accord Crosstour All Models
Civic 4 Dr.
06-07 n 77161
n 51167
06-07 n 77161
n 51167
08-12 n 77177
n 77208
08-12 n 77177
n 77208
08-10 n 77177
n 77208
08-10 n 77177
n 77208
10-12 n 77224
92-98 n 77025
Ø, EP
9/16”, 7/8”
NO DRILL
Civic 2 Dr. Coupe
93-98 n 77025
Ø
9/16”, 7/8”
NO DRILL 15
Civic 3 Dr. Hatchback
Civic 2 & 4 Dr.
Civic 2 & 4 Dr.
Civic Si Models Only
Civic 2 Dr., Except Si Models
96-00 n 77194 X
99-00 n 77025 Ø
9/16”, 11/16”
7/16”
9/16”, 7/8”
–
9/16”, 7/8”
TA
3/4”, 7/8”
1/2”
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,RC
3/4”
NO DRILL
Ø,BY,JR
3/4”
NO DRILL
Ø,BY,JR
3/4”
NO DRILL
Ø,JR
3/4”, 11/16”
NO DRILL
Ø,JR
3/4”, 11/16”
NO DRILL
–
3/4”, 7/8”
7/16”
Ø
3/4”, 7/8”
7/16”
–
3/4”, 7/8”
7/16”
Ø
3/4”, 7/8”
7/16”
–
3/4”, 7/8”
7/16”
Ø
3/4”, 7/8”
7/16”
Element SC Models Only
Element All, Except SC
Fit All, Inc. Sport
01-05 n 77116
02-05 l 77033
06-12 n 77139
n 51165
06-12 n 77139
n 51165
06-12 n 77139
n 51165
06-12 n 77139
n 51165
06-12 n 77139
n 51165
97-01 n 77164
02-06 n 77149
n 51166
07-11 n 77147
n 51168
03-04 n 77034
n 77034
05-06 n 77034
n 77034
05-06
07-08 n 77034
n 77034
07-10
09-11 n 77034
07-08 n 77153
NO DRILL 15
1-1/8”
15
–
3/4”, 7/8”
7/16”
Ø
Fit
Odyssey
09-12 n 77198
95-98
Ø,HM
12mm, 13mm,
11/16”
11/16”
Accord 4 Dr., Including Hybrid
Accord 2 Dr.
Accord 4 Dr., Including Hybrid
Accord 2 Dr., 2.4L I4 Engine
Accord 2 Dr.,3.5L V6 Engine
Accord 4 Dr., 2.4L I4 Engine
Accord 4 Dr.,3.5L V6 Engine
Civic 2 Dr., Si Models
Civic 4 Dr., Except Hybrid & Si Models
Civic 4 Dr., Si Models
Civic Hybrid
CR-V
CR-V
CR-V All Styles
Element
Element SC Models Only
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10mm, 11/16”
NO DRILL
Ø,HM,JR,KH 10, 13, 17mm
NO DRILL
20
30
30
30
30
30
30
30
30
30
30
30
20
20
20
20
20
25
25
25
25
l 51205 Ø,HM,JR,TJ 17mm, 11/16” NO DRILL 3.5 0
25
25
25
NO DRILL 25
NO DRILL 25
n 06953 HM,JR
30
25
–
74660
74660
74718
78013
78104
78104
78013
–
78002 78104
HG
74713 –
HG
78002 78104
HG
74697 78104
CH
74697 78104
CH
74697 78104
CH
74697 78104
CH
85721
–
–
–
–
–
–
–
–
74714
78104
78104
78013
78104
78013
78013
78013
78013
78013
78013
CH
–
78013
–
74697 78013
CG
–
78013
–
–
78013
–
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
20
30
15
25
25
25
25
25
25
25
25
30
30
45
30
30
30
45
30
40
15
STANDARD WIRE
3/4”
WIRING
1250 lb TW 12000 lb GTW
T-CONNECTOR
n 77165 Ø,JR
n 77161 Ø,HR,JR
See Instructions
HITCH
NUMBER
INSTALL TIME
STYLE
See Instructions
CLASS V
500-750 lb TW 5000-7000 lb GTW
HG
HG
CG
92-95 Only
96-98 Only
93-95 Only
96-98 Only
–
–
–
–
CG
30
74660 78013
74660 78013
HG
n 44643 Ø,BY,HM,JR 11/16”, 7/8” NO DRILL 3.5
l 44575 Ø,HM,JR
17mm, 11/16” NO DRILL 3.5
25
74704 78013
CG
l 44612 Ø
3/4” 7/8”
NO DRILL 3.5
30
74660 78013
HG
l 44612 Ø
3/4” 7/8”
NO DRILL 3.5
30
–
78104
–
l 44612 Ø,EP
l 44612 Ø
3/4” 7/8”
NO DRILL 3.5
NO DRILL 3.5
35
30
–
78104
78099 78104
–
l 44612 Ø,EP
l 44612 Ø
3/4” 7/8”
NO DRILL 3.5
NO DRILL 3.5
35
30
78099 78104
78099 78104
74697 78013
CH
74697 78013
74660 78013
CG
3/4” 7/8”
3/4” 7/8”
HG
CH
CH
CG
HG
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
n 77019 –
n 77013 Ø,HM
90-93
94-97
98-02
03-05
CLASS III/IV
CLASS III
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
HONDA
Accord 2 & 4 Dr.
Accord 2 & 4 Dr.
Accord 2 & 4 Dr.
Accord 2 Dr.
APPLICATIONS GUIDE
CLASS II
CLASS I
171
MODEL
HONDA
MODEL
HONDA
170
REESE TOWPOWER
10-11
01-06
Sonata All, Incl. GLS, SE & Limited
Tiburon
Tucson
Tucson
–
l –
n 77053 Ø
n 77136 Ø
n 77167 Ø,JR
18mm
NO DRILL 3.5 5
17, 19mm
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
n 33041 Ø
19mm, 7/8”, NO DRILL 3.5 5
15/16”
n 44589 Ø,CS,GP,JR 10, 14, 17, NO DRILL 3.5 5
19mm
74217 78013
BN,HG
30
74660 78013
HG
85715
–
–
74660
78013
78104
78013
78013
–
74682 78058
–
–
–
–
–
78013
78013
78013
78013
–
74690 78013
–
78013
–
78013
–
74710
78088
85761
78046
78110
78013
78104
78104
78104
78104
CG
CH
n 44528 Ø,JR
10, 17, 19mm NO DRILL 5
6
20
n 44177 Ø
21mm
NO DRILL 5
5
25
FOOTNOTES
15
NO DRILL 25
NO DRILL 15
HG
CH
CH
BN,HG
BN,HG
–
–
HG
–
–
–
NO DRILL 15
n 77148 Ø,JR
n 77111 TA
10, 12, 17mm, 3/8” NO DRILL 20
13/16”, 7/8”
1/2”
30
n 77089 Ø,HM
n 51162 Ø,HM
14, 17mm, 7/8”
n 77167 Ø,JR
n 77246 Ø,GP,JR
17, 19mm
17, 19mm
NO DRILL 25
NO DRILL 25
n 77250 Ø,HM,JR
11/16”, 3/4”
1/2”
14, 17mm, 7/8”
NO DRILL 15
NO DRILL 15
15
n 44537 Ø,JR
10mm, 9/16”,
11/16”
1/2”
19mm
NO DRILL 3.5 4
20
60
l 51088 Ø,RT,GP,JR 14, 17, 19mm NO DRILL 3.5
35
n 51076 Ø
n 51206 Ø, HM
20
15
07-09
10-12
99-01 n 77090
02-05 n 77030
06-10 n 77133
5
3.5 5
30
l 77263 Ø,HM
l 77263 Ø,HM
n 06659 HM,JR,KH
78013
78013
78013
78013
78013
12, 13, 3/4” (x2) NO DRILL 20
19mm
NO DRILL 20
16mm
16mm
NO DRILL 3.5
NO DRILL 3.5 5
–
–
CG
CH
BN,CH
CH
n 33037 Ø,GP,JR
14, 17, 19mm NO DRILL 3.5
35
85748 78104
78088 78013
n 44549 Ø
16mm
NO DRILL 3.5
20
74692 78013
CG
n 44639 Ø,HM
16mm
NO DRILL 3.5 5
15
74692 78013
85729 78013
CG
CG
Factory Tow
Package
models only
Ø,†,JR
See Instructions
15
14, 17mm, 7/8”
NO DRILL 15
NO DRILL 20
–
78013
_
78013
74710 78013
–
Ø,HM
NO DRILL 30
74710 78013
CG
–
78013
78034 78013
–
85722 78013
CH
85756 78104
–
10mm, 18mm,
9/16”
11-12 n 77225 Ø,HM,JR,KH 10mm, 13mm,
11/16”
9/16”, 3/4”
03-08 n 77042 TA
Ø,HM
1/2”
25
05-09
n 06339 Ø,GP.JR
n 51180 Ø,GP.JR
10-12
n 06667 Ø,GP
n 06994 Ø,GP
n 06132 Ø,GP.JR
Veracruz
6 20
STANDARD WIRE
Genesis 2 Dr. Coupe
Santa Fe
Sonata
Sonata
Sonata
10, 17, 19mm NO DRILL 5
30
T-CONNECTOR
95-99
00-05
06-11
07-11
2012
2012
06-11
96-00
01-06
07-11
09-12
11-12
07-09
09-11
Santa Fe
l 51139 Ø,RT,JR
NO DRILL 3.5 5
06-10
Elantra 4 Dr. Sedan
Elantra Touring 5 Dr.
Elantra 4 Dr. Sedan
Entourage
Genesis 4 Dr. Sedan
Santa Fe
n 51159 Ø,CS,GP,JR 10, 14, 17,
19mm
74660
74715
85747
74477
74217
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
09-11
92-96
97-00
01-02
06-11
l 44174 Ø,HM,JR
n 33040 Ø
n 37152 Ø
15
15
15
45
15
DRILL BITS
Pilot
Prelude All Models
Prelude All Models
Prelude All Models
Ridgeline
HUMMER
H3
HYUNDAI
Accent All Models
Accent All Models
Accent 4 Dr. Sedan
Accent 3 Dr. Hatchback Only
Accent 4 Dr. Sedan
Accent 5 Dr. Hatchback
Azera All Models
Elantra All Models
Elantra All Models, Inc. GT
NO DRILL 3.5 5
NO DRILL 3.5 5
WRENCHES
03-08
18mm
FOOTNOTES
Pilot
18mm
HITCH
NUMBER
15
l 44174 Ø,HM,JR
l 44174 Ø,HM,JR
See Instructions
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
n 06356 Ø,HM
DRILL BITS
98-02
WRENCHES
Passport w/Under Vehicle Spare
15
15
NO DRILL 3.5 5 15
FOOTNOTES
n 06366 Ø
30
15
NO DRILL 3.5 5
NO DRILL 3.5 5
STYLE
18mm
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
n 06398 Ø,HM,JR
n 06057 Ø
NO DRILL 20 l 51156 Ø,RT,HM,JR 18mm
DRILL BITS
18mm
WRENCHES
n 06398 Ø,HM,JR
n 06398 Ø,HM,JR
FOOTNOTES
99-04
05-10
11-12
94-97
98-01
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
YEAR
STYLE
MODEL
CLASS V
500-750 lb TW 5000-7000 lb GTW
Odyssey
Odyssey
Odyssey
Passport
Passport w/Door Mounted Spare
18mm
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
16mm
25
25
15
15
NO DRILL 20
07-12
n 44582 Ø,GP.JR
13, 14, 17mm NO DRILL 3.5
n 44642 Ø,†,GP
n 44660 Ø,GP
M16
n 44666 Ø,GP,JR
n 44573 Ø,HM,JR
15
15
16mm
NO DRILL 3.5 5.25 20
10, 14, 16mm NO DRILL 5 5 30
16mm
NO DRILL 3.5 4
NO DRILL 3.5 4
25
–
CG
CG
ABBREVIATIONS
JT 2WD models only.
173
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - HYUNDAI
HONDA
HONDA - HYUNDAI
MODEL
172
REESE TOWPOWER
REESE TOWPOWER
l 44610 Ø
FX50
09-11
l 44610 Ø
G35 4 Dr. Sedan
G37 4 Dr. Sedan
I30
I30
I35
QX4
07-08
09-10
95-99
00-01
02-04
97-03
13mm, 3/4”
3/4”
13mm, 3/4”
3/4”
n 77028 TA
n 77028 TA
7/8”
1/2”
7/8”
1/2”
n 77028 TA
7/8”
1/2”
10, 12, 13, 14, NO DRILL 3.5
17, 19mm
10, 12, 13, 14, NO DRILL 3.5
17, 19mm
15
17mm
NO DRILL 5
l 33050 Ø
l 44132 Ø
17mm
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
40
78105 78104
CH
40
78105 78104
CH
78108
78108
–
–
–
74218
CH
45
45
30
30
30
n 06061 Ø,GP
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
09-12
l 51046 Ø,HM
17mm
NO DRILL 5
NO DRILL 5
5.5 20
5.5 20
78104
78104
78104
78103
78013
78013
CH
–
–
–
HG
5.5 20
QX56
04-07
l 37091 Ø
19mm
NO DRILL 6
10 15
74682 78058
only models
w/Tow
Package
08-10
l 44674 Ø, HM
l 44674 Ø, HM
19mm
QX56
NO DRILL 6
NO DRILL 6
10 15
10 15
74682 78058
only models
w/Tow
Package
INTERNATIONAL
Pickup Full Size
69-75
n 33065 FP
n 37087 FP
See Instructions
5
6
13, 18, 19mm, NO DRILL 5
8 30
10 45
10 45
–
78058
–
–
78058
–
Pickup Full Size w/Deep Drop Bumper
69-75
ISUZU
Amigo w/Door Mounted Spare
Axiom w/Under Vehicle Spare
98-00
02-03
Hombre w/Rear Fascia & No Step Bumper
96-97
Hombre w/Step Bumper
96-97
n 37081 M
n 06366 Ø
n 33055 Ø,†
HM,RH
18mm, 3/4”, 7/8” –
n 33053 Ø,GU
35
n 33055 Ø,†
Hombre w/Rear Fascia & No Step Bumper
Hombre w/Step Bumper
98-00
98-00
n 06958 Ø,GU,RH
n 06953 HM,JR
3/4”, 7/8”
1/2”
7/8”
15
n 33041 Ø
n 06958 Ø,GU,
19mm
18mm, 3/4”, 7/8” –
n 37096
35 n 37042
n 37096
45
45
45
See Instructions
See Instructions
See Instructions
n 51063 CN,GP,GU
See Instructions
n 51074 Ø,GP
21, 22mm,
11/16”
21, 22mm,
11/16”
3.5 5 20
19mm, 7/8”,
15/16”
13, 18, 19mm,
3/4”, 7/8”
18mm, 3/4”,
7/8”
13, 18, 19mm,
3/4”, 7/8”
20
–
78013
74217 78013
–
1” hole 3.5 5
saw
NO DRILL 3.5 6
40
74178 78058
BN
NO DRILL 3.5 6
45
74178 78058
BN
NO DRILL 3.5 6
40
74216 78058
74216 78058
BN
n 37152 AF,CN,GU,ST 15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
n 44062 CN,GU
3/4”
NO DRILL 3.5 5
Oasis
Pickup I-Series All Models
96-99
06-07
Pickup I-Series All Models
2008
Rodeo
1991
n 06057 Ø
30
n 33040 Ø
Rodeo
92-97
n 06057 Ø
30
n 33040 Ø
Rodeo w/Door Mounted Spare
98-01
n 06366 Ø
15
n 44621 Ø
Rodeo w/Under Vehicle Spare & Except
Models Equipped w/3.5L
Rodeo Sport
2 Dr., w/Door Mounted Spare
Trooper All Models
98-04
n 06356 Ø,HM
15
n 33041 Ø
01-03
n 06366 Ø
15
92-02
n 06130 Ø
30
n 51074 Ø,GP
7.5 25
n 44593 Ø,GP
NO DRILL 6
7.5 25
n 44593 Ø,GP
n 33043 –
21, 22mm,
11/16”
21, 22mm,
11/16”
See Instructions
See Instructions
See Instructions
19mm, 7/8”,
15/16”
See Instructions
BN
40
20
30
NO DRILL 6
BN,HG
7.5 25
74660 78013
78001 78013
HG
NO DRILL 6
NO DRILL 6
7.5 25
78001 78013
BN,CG
5
45
–
–
5
45
74477 78013
BN,HG
3.5 5
15
74217 78013
BN,HG
NO DRILL 3.5 5
15
74217 78013
BN,HG
74217 78013
BN,HG
74661 78013
BN,HG
5
7.5 45
78013
BN,CG
ABBREVIATIONS
long bed trucks.
JT 2WD models only.
RK Fits vehicles with factory and some aftermarket rollpans.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
INFINITI
FX35
n 77204 EP,GP
n 77204 EP,GP
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
175
MODEL - ISUZU
INFINITI
INFINITI MODEL
- ISUZU
174
REESE TOWPOWER
REESE TOWPOWER
Cherokee Downsize
All Models (Will Not Fit Grand Cherokee)
91-96
3/4”, 13/16”, NO DRILL 3.5 5.5 45
7/8”
n 88001
See Instructions
n 37096
See Instructions
n 37152 –
n 51001 –
See Instructions
15,18,21mm, 1/2”
5 6 35
T-50, 3/4”,
11/16”, 9/16”
18mm, 7/8”, NO DRILL 3.5 5 40
13/16”, 3/4”
3/4”, 13/16”, NO DRILL 3.5 5.5 45
7/8”
n 06954 Ø,GP
9/16”, 3/4”, 7/8”, NO DRILL 30 n 37042
various metric
n 88001
See Instructions
n 51001 –
n 44088 –
n 33002 –
See Instructions
3.5 5 40
See Instructions
n 37152 –
APPLICATIONS GUIDE
9/16”, 3/4”, 7/8”, NO DRILL 30 n 37042
various metric
n 88001
See Instructions
n 33002 –
See Instructions
n 51001 –
3.5 5 40
See Instructions
n 37152 –
n 06378 Ø
n 06428 Ø,GP
3/4”
16mm, 15/ 16”
5/8”
15 n 51085 Ø,GP
n 06428 Ø,GP
n 06428 Ø,EP,GP
16mm, 15/ 16”
5/8”
16mm, 15/ 16”
5/8”
Grand Cherokee
1993
n 06081 Ø
n 88001
18, 19mm
1/2”
n 06081 Ø
n 88001
18, 19mm
See Instructions
1/2”
See Instructions
Grand Cherokee
1999
n 06966 Ø
Grand Cherokee
00-04
n 06966 Ø
Grand Cherokee
All, Except SRT-8 & Models w/OEM Tow Hook
Grand Cherokee
Models w/OEM Tow Hook
Grand Cherokee
All, Except SRT-8 & Models w/OEM Tow Hook
Grand Cherokee
Grand Cherokee
All, Except Models w/OEM Tow Hook
Grand Cherokee
Grand Wagoneer
05-06
n 06378 Ø
05-06
n 06378 Ø,AI
07-10
n 06378 Ø
3/4”
07-10
n 06378 Ø,AI
3/4”
3/4”
15
30 n 51085
Ø,EP,GP
30 n 37042
n 37096
n 51010
30 n 37096
45 n 37042
3/4”
NO DRILL 5
3.5
See Instructions
16mm,
NO DRILL 3.5
15/16”
See Instructions
7.5 20
15
30
See Instructions
Ø
See Instructions
See Instructions
See Instructions
n 33095 Ø
n 44555 Ø,GP
15,18,21mm, 1/2”
5 6 35
T-50, 3/4”,
11/16”, 9/16”
18mm, 7/8”, NO DRILL 3.5 5 40
13/16”, 3/4”
3/4”
NO DRILL 5 7.5 20
16mm, 15/16” NO DRILL 3.5
15
n 44555 Ø,EP,GP
16mm, 15/16” NO DRILL 3.5
30
n 33006 Ø
n 37152 –
See Instructions
3.5 5 20
45
45
n 44093 Ø
n 33006 Ø
n 37152 –
n 51010 Ø
15 n 51059 Ø
See Instructions
See Instructions
3.5 5 20
3.5 5 15
n 44093 Ø
n 33018 Ø,EP
15 n 51059
See Instructions
3.5 5 15
n 44092 Ø
n 33018 Ø,EP
Ø
15,18,21mm, 1/2”
5 6 35
T-50, 3/4”,
11/16”, 9/16”
18mm, 7/8”, NO DRILL 3.5 5 40
13/16”, 3/4”
3/4”, 13/16”, NO DRILL 3.5 5.5 45
7/8”
FOOTNOTES
STANDARD WIRE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
T-CONNECTOR
–
78013
–
74476 78013
HG
74206 78013
HG
78044
74705
85764
74705
BN,CG
78013
78104
78104
78104
BN,CH
–
BN,CH
74667 78104
GC
74668 78104
GC,JM
NO DRILL 5
3.5 5 20
7.5 75
74889 78104
GC
NO DRILL 3.5 5 20
NO DRILL 5 7.5 75
74889 78104
GC
3/4”
NO DRILL 3.5 5 20
NO DRILL 5 7.5 20
78031 78013
BN,CG
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
See Instructions
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
18, 19mm,
9/16”
18, 19mm
18, 19mm,
9/16”
18, 19mm
3.5 5
5 6
45
35
3.5 5
3.5 5
5 6
20
45
35
3/4”
NO DRILL 5
7.5 20
n 44092 Ø
n 33095 Ø
3/4”
NO DRILL 5
7.5 90
n 33095 Ø,AI
3/4”
NO DRILL 5
7.5 90
78031 78013
BN,CG
3/4”
NO DRILL 5
7.5 20
n 33095 Ø
3/4”
NO DRILL 5
7.5 20
74702 78104
BN
NO DRILL 90 n 51149 Ø,AI
3/4”
NO DRILL 5
7.5 90
n 33095 Ø,AI
3/4”
NO DRILL 5
7.5 90
74702 78104
BN
90 n 51149
Ø,AI
11-12
n 51195 Ø,GP
See Instructions
5 7.5 20
n 44650 Ø,GP
21mm
NO DRILL 5
7.5 20
74702 78104
BN
11-12
n 51195 Ø,AI,GP
See Instructions
5 7.5 40
n 44650 Ø,AI,GP
21mm
NO DRILL 5
7.5 40
74702 78104
BN
See Instructions
3.5 5 20
n 33006 Ø
n 44093 Ø
See Instructions
–
78013
GC
7.5 20
n 37053 Ø,GP
85750 78104
CH
45
45
n 44082 Ø,GP
n 37152 –
18, 19mm,
9/16”
18, 19mm
3.5 5
3.5 5
NO DRILL 4 5
78017
78017
74682
85262
74705
78104
78104
78058
BN,CH
78104
BN,CH
1993
02-07
n 06081 Ø
18, 19mm
1/2”
n 06971 Ø,GP
n 88001
30 n 51010
15 n 51054
Ø
Ø,GP
45 n 37096
n 37042
See Instructions
Liberty
Liberty
2008
09-12
n 06529 Ø,HM
n 06529 Ø,HM
19mm
19mm
NO DRILL 15
NO DRILL 15
Patriot
2007
n 06428 Ø,GP
16mm, 15/ 16”
5/8”
15 n 51085
18, 19mm
NO DRILL 5
See Instructions
See Instructions
l 44585 Ø,HM
l 44585 Ø,HM
Ø,GP
16mm, 15/16” 5/8”
3.5
15
n 44555 Ø,GP
See Instructions
NO DRILL 5
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
18, 19mm
NO DRILL 5
18, 19mm
NO DRILL 5
16mm, 15/16” NO DRILL 3.5
45
20
20
7.5 20
6 35
7.5 20
7.5 20
15
BN,CH
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
n 06954 Ø,GP
06-10
07-10
2011
07-10
Liberty
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
n 33002 –
Commander
Compass
Compass
Compass Rallye Edition
94-98
DRILL BITS
See Instructions
n 44088 –
Grand Cherokee
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
9/16”, 3/4”, 7/8”, NO DRILL 30 n 37042
various metric
3.5 5 40
WIRING
1250 lb TW 12000 lb GTW
n 06954 Ø,GP
n 44088 –
Cherokee Downsize All Models (Will Not 97-01
Fit Grand Cherokee)
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
YEAR
84-90
STYLE
MODEL
JEEP
Cherokee Downsize
All Models (Will Not Fit Grand Cherokee)
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
177
MODEL
JEEP
MODEL
JEEP
176
REESE TOWPOWER
REESE TOWPOWER
2011
1997 n 77016
Ø,DA
TJ Canada
98-06 n 77016
Ø,DA
15 l 51145
Ø,RT,HM
See Instructions
4
15
l 33036 Ø,HM,TD
l 44565 Ø,HM
Wagoneer Downsize
All Models (Will Not Fit Grand Wagoneer)
84-90
See Instructions
3.5 5 40
9/16”, 3/4”, 7/8” NO DRILL 30 n 51001 –
HITCH
NUMBER
HITCH
NUMBER
WRENCHES
n 06954 Ø,GP
n 33002 –
7/8”
18mm, 7/8”, NO DRILL 3.5 5
13/16”, 3/4”
85775 78104
Factory 7-Way
models only
85775 78104
74489 78058
CH
74223 78058
BN
–
78013
–
BN
40
Wrangler
87-90 n 77003
–
10, 13, 17mm,
9/16”, 5/8”
3/8”
30
–
78058
–
Wrangler All, Except Renegade
Wrangler All, Inc. Renegade
91-95
91-95 n 77003
3/8”
30
Wrangler
1997 n 77016
Ø,DA
10, 13, 17mm,
9/16”, 5/8”
5/8”, 3/4”
74489 78058
74489 78058
BN
–
74489 78058
BN
74223 78058
BN
74223 78058
74693 78058
BN
Wrangler All, Inc. Unlimited
Wrangler Except Unlimited
Wrangler Unlimited 4 Dr.
98-06 n 77016
Ø,DA
98-06
07-12
Wrangler
YJ Canada
07-12
87-90 n 77003
–
YJ Canada
91-95 n 77003
–
KIA
Amanti
Amanti
04-06
07-09
10-12 n 77234
01-04
06-10 n 77154
01-06
06-08 n 77154
Sedona
Sedona 118.9 Long Wheelbase Only
Sedona 113.8 Short Wheelbase Only
Sorento
02-05
06-12
07-10
03-06
09-10
11-12
02-05
06-11
06-11
07-10
10, 13, 17mm,
9/16”, 5/8”
10, 13, 17mm,
9/16”, 5/8”
15 l 51145
15 l 51145
l 06448 Ø
20
l 06448 Ø
– 51077
20 – 51077
Ø,RT,HM
Ø,RT,HM
See Instructions
See Instructions
Ø
3/4”
Ø
3/4”
4
15
4
15
NO DRILL 3.5 4
NO DRILL 3.5 4
20
20
l 33036 Ø,HM,TD
l 44565 Ø,HM
5/8”, 3/4”
l 33036 Ø,HM,TD
l 44565 Ø,HM
5/8”, 3/4”
n –
– 44557
Ø
Ø
3/4”
NO DRILL 3.5 4
15
15
15
15
15
20
– 44557
Ø
3/4”
NO DRILL 3.5 4
20
5/8”, 3/4”
NO DRILL 4
NO DRILL 4
5/8”, 3/4”
NO DRILL 4
NO DRILL 4
3.5
74693 78058
–
78058
BN
30
3/8”
30
74489 78058
BN
–
78013
78011 78013
–
74692
–
–
–
78065
78013
78013
78013
78013
78013
CG
74710
78011
–
–
–
74708
78013
78013
78013
78013
78013
78013
CG
85266
78046
78046
85317
78013
78104
78104
78013
HG
74706
85726
85726
85760
85726
85726
85726
85760
74708
–
–
74895
78104
–
–
–
–
–
–
–
–
78013
78104
78104
–
Ø,HM,JR
17mm, 11/16”
NO DRILL 20
Ø,HM,JR
17mm, 3/4”
NO DRILL 20
Ø,HM,JR
17mm, 3/4”
NO DRILL 20
n 77154 Ø,HM,JR
17mm, 3/4”
NO DRILL 20
n 77225 Ø,HM,JR,KH 10, 13mm, 11/16” NO DRILL 30
n 77044 TA
n 77136 Ø
3/4”
n 77167 Ø,JR,X
n 77169 Ø,GP,JR
17, 19mm
07-09
11-12
11-12
11-12
11-12
11-12
11-12
11-12
10-11 n 77230
05-09 n 77099
95-97
98-02
19mm
10, 12, 13, 14,
17mm
20
NO DRILL 20
NO DRILL 25
NO DRILL 30
1/2”
n 06029 –
n 33062 –
n 44537 Ø,JR
20
n 44578 HM,JR
l 44558 Ø,HM
06133
06133
06133
06133
06133
06133
06133
Ø,GP,JR
17mm
Ø,JR
14, 17mm, 7/8”
BN
3/8”
n 06396 Ø,HM,JR,SC 10, 12, 13, 17mm NO DRILL 40
n 06607 Ø,HM,JR 10, 12, 17mm, NO DRILL 20
11/16”
Forte 4 Dr. Sedan, All Models
Magentis Canada Only
Magentis Canada Only
Optima
Optima
New Body Style (App. starts with 2006-1/2)
Optima
Optima All, Incl. LX & EX
Rio All, Inc. Cinco
Rio 4 Dr. Sedan
Rio5 5 Dr. Hatchback Only
Rondo
Sorento
Sorento Base I4
Sorento EX I4
Sorento EX V6 w/ Factory Tow Package
Sorento EX V6 w/o Factory Tow Package
Sorento LX I4
Sorento LX V6
Sorento SX V6
Soul
Spectra Except Spectra5
Sportage 2 & 4 Dr.
Sportage 2 & 4 Dr.
5/8”, 3/4”
BN
NO DRILL 40
NO DRILL 20
n 06264 HM
n 06264 HM
20
20
l 51082 Ø,RT,HM
l 51082 Ø,RT,HM
19mm
n 51206 Ø, HM
n 51206 Ø, HM
16mm
n 51206 Ø, HM
n 51206 Ø, HM
16mm
n 51206 Ø, HM
n 51206 Ø, HM
16mm
16mm
NO DRILL 3.5
NO DRILL 3.5
n 51206 Ø, HM
16mm
NO DRILL 3.5
19mm
16mm
16mm
NO DRILL 5
NO DRILL 5
NO DRILL 3.5
NO DRILL 3.5
NO DRILL 3.5
NO DRILL 3.5
5
5
5
5
5
5
5
5
5
15
15
15
15
15
15
15
15
15
17, 18mm, 7/8” 1/2”
5
5.5 30
20
25
5 15
NO DRILL 3.5 4
12, 17mm, 3/4” 3/8”
3.5 4
19mm
19mm
NO DRILL 5
l 44558 Ø,HM
n 44639 Ø,HM
19mm
NO DRILL 5 5
NO DRILL 3.5 5
n 44639 Ø,HM
n 44639 Ø,HM
16mm
n 44639 Ø,HM
n 44639 Ø,HM
16mm
n 44639 Ø,HM
n 44639 Ø,HM
16mm
16mm
16mm
16mm
16mm
NO DRILL 3.5 5
NO DRILL 3.5 5
NO DRILL 3.5 5
NO DRILL 3.5 5
NO DRILL 3.5 5
NO DRILL 3.5 5
15
15
15
15
15
15
15
15
–
–
–
–
–
CG
HG
–
–
–
–
BN,CH
BN,CH
BN,HG
CH
CH
BN,CH
CH
CH
CH
BN,CH
BN,CG
–
–
HG
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 44088 –
15
5/8”, 3/4”
15
5/8”, 3/4” NO DRILL 4
15
5/8”, 3/4” NO DRILL 4
15
3/4”, 13/16”, NO DRILL 3.5 5.5 45
FOOTNOTES
5/8”, 3/4”
NO DRILL 4
NO DRILL 4
STANDARD WIRE
5/8”, 3/4”
T-CONNECTOR
l 33036 Ø,HM,TD
n 44565 Ø,HM
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
15
DRILL BITS
4
WRENCHES
See Instructions
15
FOOTNOTES
Ø,RT,HM
WIRING
1250 lb TW 12000 lb GTW
HITCH
NUMBER
15
15 l 51145
DRILL BITS
5/8”
WRENCHES
n 06428 Ø,GP
16mm, 15/ 16”
5/8”, 3/4”
FOOTNOTES
STYLE
Patriot
TJ Canada
DRILL BITS
16mm, 15/16” NO DRILL 3.5
WRENCHES
n 44555 Ø,GP
FOOTNOTES
15
INSTALL TIME
STYLE
3.5
DRILL BITS
16mm, 15/16” 5/8”
WRENCHES
Ø,GP
FOOTNOTES
15 n 51085
HITCH
NUMBER
5/8”
INSTALL TIME
STYLE
16mm, 15/ 16”
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
08-10
CLASS V
500-750 lb TW 5000-7000 lb GTW
n 06428 Ø,GP
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Patriot
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
CLASS II
CLASS I
179
MODEL
JEEP
- KIA
JEEP
MODEL
- KIA
178
REESE TOWPOWER
05-10
n 06339 Ø,GP.JR
n 51180 Ø,GP.JR
Sportage 6 Cyl. Models
05-10
n 06339 Ø,GP.JR
n 51180 Ø,GP.JR
Sportage
11-12
n 06994 Ø,GP
n 06132 Ø,GP.JR
LAND ROVER
Freelander
Freelander
LR2
02-03
04-05
08-11
LEXUS
ES 250
ES 250 FWD
ES 300 4 Dr.
ES 300 4 Dr.
90-91
90-91 l 77102
92-96 n 77004
97-01 n 77004
ES 300 4 Dr.
ES 330 4 Dr.
EP
See Instructions
Ø
14, 17mm
Ø
14, 17mm
02-03
04-06
40
NO DRILL 30
NO DRILL 30 n 06326
n 51178
n 06326
n 51178
n 06326
n 51178
16mm
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
n 44660 Ø,GP
16mm
NO DRILL 3.5 4
15
85751 78104
B,E
n 33064 –
n 33064 –
13, 17mm, 3/4” 1/2”
22mm,
11/16”, 5/8”
20
20
20
–
–
–
78104
78104
78104
–
n 44640 Ø,HM
3.5
3.5
NO DRILL 4 4
–
–
–
–
78104
78104
78104
78104
–
–
78104
–
–
78104
–
13, 17mm, 3/4” 1/2”
RX 300
RX 330 All, Inc. Models w/18 Spare Tire
RX 350
RX 350
01-03
04-06
07-09
10-12
14, 17mm
14, 17mm
NO DRILL 3.5
NO DRILL 3.5
Ø,RT
14, 17mm
NO DRILL 3.5
15
20
20
l 51155 Ø,RT
–
–
–
–
–
–
Factory
7-Way
models
only
7.3 35
–
78104
–
30
20
20
20
20
15
85728
74208
74225
–
–
–
–
–
78013
78013
78104
78104
78104
78104
CH
6
6
6
6
6
–
78106
78106
78106
78104
78104
78104
78104
–
NO DRILL 3.5
NO DRILL 4 5
15
20
20
30
NO DRILL 4
5
30
NO DRILL 3.5
n 44633 Ø,GP,JR,JV 10, 12, 14, 17, NO DRILL 4 5
19mm
20
30
–
78104
85708 78104
–
n 33066 Ø
n 44546 Ø
Ø,RT
–
85740 85262
74682
Ø
19mm
NO DRILL 5
5
10, 12, 13,
17mm, 3/4”,
1/2”
NO DRILL 6
15
NO DRILL 25
Ø,HM
FOOTNOTES
BN,CG
10-11 n 77237
96-97
98-99
2000
01-02
03-07
99-00
15 l 51153
l 51155
l 51155
STANDARD WIRE
78038 78013
HS 250h Hybrid
LX 450
LX 470
LX 470
LX 470
LX 470
RX 300
n 06276 Ø
T-CONNECTOR
25
l 44548 Ø,LT,SI
15
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
13, 14, 17mm NO DRILL 3.5
03-09
NO DRILL 3.5
DRILL BITS
n 44582 Ø,GP.JR
GX 470
14, 17mm
WRENCHES
–
– 44644
Ø,HM
FOOTNOTES
25
10-11
15 l 51153
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
13, 14, 17mm NO DRILL 3.5
15
15
15
15
15
15
n 06276 Ø
WIRING
1250 lb TW 12000 lb GTW
n 44582 Ø,GP.JR
GX 460
Ø,HM,JR,KH 10, 17, 19mm
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
25
25
25
25
15
NO DRILL 20
HM
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Sportage 4 Cyl. Models
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
12, 19mm, 7/8” NO DRILL
5
5
5
5
5
3.5
n 44546 Ø
n 44546 Ø
12, 19mm, 7/8” NO DRILL
n 44546 Ø
l 44076 Ø,HM
12, 19mm, 7/8” NO DRILL
14, 17mm
NO DRILL
l 44076 Ø,HM
l 33075 Ø
14, 17mm
NO DRILL 3.5
NO DRILL 3.5
12, 19mm, 7/8” NO DRILL
14, 17mm
l 33075 Ø
14, 17mm
n 44633 Ø,GP,JR,JV 10, 12, 14, 17,
19mm
n 44627 Ø,†,GP,JR,JV 10, 12, 14, 17,
19mm
l 33075 Ø
14, 17mm
BN,HG
BN,HG
–
–
–
–
–
–
–
RX 400h Hybrid
RX 450h Hybrid
06-09
10-12
LINCOLN
Aviator
03-04
l 33031 Ø,KL
15, 18mm, 7/8” NO DRILL 5
8
20
74665 78058
74682 78058
w/ Factory
7-Way
models w/Tow
Package only
Aviator
2005
l 33031 Ø,KL
15, 18mm, 7/8” NO DRILL 5
8
20
74682 78058
w/ Factory
7-Way
Continental
88-97 n 77017
Ø,JR
10, 13, 15mm,
3/4”
–
78104
–
Continental
98-02 n 77017
Ø,JR
10, 13, 15mm,
3/4”
–
78104
–
85251 –
85251 –
74682 78058
LS
00-02
LS
03-06
LS
Mark LT Built Before 8/2005 w/ Factory 7-Way 2006
NO DRILL 20 n 06368 Ø,GP,JR
n 88002
NO DRILL 20 n 06368 Ø,GP,JR
n 88002
n 06393 –
n 06393 FE
10, 13, 15mm,
3/4”
See Instructions
NO DRILL 20
10, 13, 15mm,
3/4”
See Instructions
NO DRILL 20
11/16”
7/16”
11/16”
7/16”
14, 17mm
NO DRILL 3.5
20
–
45
45
20
30
l 51064 Ø,RT
3/4”
7/16”
5
10 30
l 33077 Ø,HM
3/4”
7/16”
l 37090 Ø
l 44131 Ø
3/4”
7/16”
3/4”
7/16”
l 44655 Ø,HM
TBD
6
6
5
NO DRILL 6
8
30
10 30
10 30
8 30
LS
w/ Factory
7-Way
ABBREVIATIONS
JT 2WD models only.
181
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL
KIA
- LINCOLN
KIA - LINCOLN
MODEL
180
REESE TOWPOWER
8 20
80-83 n 77002
Mark VIII
MKS
MKT All Models
93-98
09-12
10-12
MKX
07-10
MKX
2011
MKZ
MKZ
Navigator
07-09 n 77152
10-12 n 77239
98-02
Town Car
CA
3/4”
1/2”
25 n 06043
n 88002
n 06004
n 06663
30 n 51103
45
40
30
CA
See Instructions
Ø,JR
Ø,JR
CA,GP
13mm, 3/4” 1/2”
3.5 6 30
l 44636 Ø,HM,JR
80-89 n 77002
Town Car
90-02 n 77002
Town Car
Town Car
90-96
03-10
Town Coupe
80-89 n 77002
n 06525 Ø,GP,JR,KH 5.5mm, 8mm, 3/4” NO DRILL 45 n 51200 CP,GP,JR,KH 5.5, 8mm, 3/4” 1/2”
4
0
55
n 51200 CP,GP,JR,KH 5.5, 8mm, 3/4” 1/2”
4
0
55
12, 13mm, 3/4”
1/2”
Ø
11/16”
NO DRILL 20
n 51024 Ø,HM
CA,HA
3/4”
3/4”
1/2”
1/2”
25 n 06043
n 88002
25 n 06043
3/4”
1/2”
25 n 06043
n 88002
45
30 n 51103
45
30 n 51103
CA
See Instructions
CA,HA
n 88002
n 06043 CA,HA
CA,HA
13mm, 3/4”
5.5, 8mm,
3/4”
n 44658 Ø,GP,JR,KH 5.5mm or
7/32”, 8mm,
3/4”
JR,KH
45
30 n 51103
See Instructions
30 n 51103
45
CA
See Instructions
7/8”
10 15
NO DRILL 10
12 20 –
–
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
3/4”, 7/8”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
Ø,@,CP
–
85727 –
CH, w/
Factory
7-Way
30
–
78058
–
–
30
–
78104
78095 78104
85727 78104
NO DRILL 3.5
45
85774 78104
CH
NO DRILL 3.5 4
45
85746 78104
CH
CH
20
85731 78104
85766 78104
74665 78058
–
78104
–
1/2”
3.5 6
18, 19mm, 6” NO DRILL 4
ratchet
n 44567 Ø,CP,GP,
10 20 n 41933
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
NO DRILL 6
4
45
GP,JR,TA
CA
WRENCHES
FOOTNOTES
STYLE
n 33047 CA,GP
21mm, 3/4”,
7/8”
WRENCHES
5
n 44552 Ø,CP
FOOTNOTES
10 20
WIRING
1250 lb TW 12000 lb GTW
HITCH
NUMBER
7/8”
n 51096 Ø,CP,HM
Mark VI All Styles
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 51075 Ø,CP
06-08
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Mark LT Built After 8/2005
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
n 33052 Ø,GP
3/4”, 7/8”
NO DRILL 5
n 44032 Ø,HM
n 44622 Ø,GP
7/8”, 3/4”
NO DRILL 5
NO DRILL 6
8
CH
CH, w/
Factory
7-Way
CH
BN
AB,CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 AB,CA,GP 13mm, 3/4”
1/2”
10 20
10 15
3.5 6 30
AB,CA,EO,
GP,HA
13mm, 3/4”
1/2”
3.5 6 30
n 33047 AB,CA,EO, 13mm, 3/4”
1/2”
3.5 6
30
–
78104
–
AB,CA,EO,
GP,HA
13mm, 3/4”
1/2”
3.5 6 30
n 33047 AB,CA,EO, 13mm, 3/4”
1/2”
3.5 6
30
–
78104
–
AB,CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 AB,CA,GP 13mm, 3/4”
1/2”
3.5 6
30
–
78104
–
–
78104
–
7/8”, 3/4”
GP,HA
GP,HA
Zephyr
MAZDA
2
3 4 Dr. Sedan, Except Models with Grand Touring
LED Taillights Package
3 5 Dr. Hatchback, Except Models with Grand
Touring LED Taillights Package
3 4 Dr. Sedan, Models with Grand Touring LED
Taillights Package
3 5 Dr. Hatchback, Models with Grand Touring LED
Taillights Package
3 4 Dr. Sedan, Except Models with Grand Touring
LED Taillights Package
3 4 Dr. Sedan, Models with Grand Touring LED
Taillights Package
3 5 Dr. Hatchback, Except Models with Grand
Touring LED Taillights Package
3 5 Dr. Hatchback, Models with Grand Touring LED
Taillights Package
5
5
6 4 Dr. Sedan
6 Sport Wagon
6 5 Dr. Hatchback
6 4 Dr. Sedan
2006 n 77152
GP,JR,TA
12, 13mm, 3/4”
1/2”
11-12 n 77252
04-09 n 77188
Ø,GP,JR
See Instructions
11/16”
NO DRILL 30
1/2”
35
85754 78104
74697 78013
CH
GP
04-09 n 77188
GP
11/16”
1/2”
35
74697 78013
CG
06-09 n 77188
GP
11/16”
1/2”
35
–
78013
–
06-09 n 77188
GP
11/16”
1/2”
35
–
78013
–
10-12 n 77244
Ø,GP
10mm, 11/16”,
9/16”
NO DRILL 20
74697 78013
CG
10-12 n 77244
Ø,GP
10mm, 11/16”,
9/16”
NO DRILL 20
–
78013
–
10-12 n 77245
Ø,GP
11/16”, 9/16”
NO DRILL 15
74697 78013
CG
10-12 n 77245
Ø,GP
11/16”, 9/16”
NO DRILL 15
–
78013
–
85754
85754
85701
–
85701
78112
78104
78104
78104
78104
78104
78104
CH
626
98-02 n 77021
–
78013
–
CX-7
07-11
n 06401 Ø,GP,JR
CX-9
Millenia
07-12
95-02
n 06134 AI
06-10
2012
03-08
04-07
04-08
09-12
n 77150 GP
n 77246 GP
n 77152 GP,JR,TA
n 77159 Ø,TA
n 77152 GP,JR,TA
n 77205 GP,JR
JR
25
25
12, 13mm, 3/4” 1/2”
45
11/16”
NO DRILL 25
12, 13mm, 3/4” 1/2”
45
11/16”
1-1/8”
30
11/16”, 3/4”
1/2”
11/16”, 3/4”
3/8”
3/4”, 7/8”
hole saw
1/2”, 1”
hole saw
30
40
10mm, 11/16”
7/16”
60
l 44554 Ø,GP,JR
11/16”
NO DRILL 3.5
l 44572 Ø,HM
19mm
NO DRILL 4
4
CG
–
CH
–
CH
CH
40
85701 78104
78061
CH
w/ Factory Tow
package
15
85754 78104
–
78104
CH
–
ABBREVIATIONS
JT 2WD models only.
183
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - MAZDA
LINCOLN
LINCOLN - MODEL
MAZDA
182
REESE TOWPOWER
REESE TOWPOWER
MPV Van w/o Ground Effects
MPV Van All Models
00-03
04-06
n 06068 Ø,JR
Navajo
91-94
n 06365 –
6
30
–
–
1/2”
4
6
20
74424 78013
BN,HG
1/2”
5
6
40
1/2”
3.5 5
20
1/2”
4
6
20
74424 78013
BN,HG
1/2”
3.5 5
20
l 37051 –
APPLICATIONS GUIDE
n 44100 –
Pickup B-Series All Models
90-93
n 37042
See Instructions
94-97
n 37096
n 51032 EG
See Instructions
n 37042
18, 19mm, 1/2”
3/4”, 7/8”
See Instructions
n 37096
See Instructions
n 51032 V
18, 19mm, 1/2”
3/4”, 7/8”
See Instructions
n 37042
98-01
n 37096
n 37042
See Instructions
99-01
n 37096
n 51032 V
See Instructions
n 37042
Protege All Models
Protege All Models
Protege 5
Tribute
n 37096
n 51032 V
02-09
95-98 n 77241
99-03 n 77080
02-03 n 77119
01-02
Tribute
Tribute
2003
2004
05-06
18, 19mm, 1/2”
3/4”, 7/8”
See Instructions
n 33058 EG,SD
45
n 37152 Ø
45
n 44101 EG
3.5 5 20
45
See Instructions
3.5 5 20
n 33058 SD,V
n 44101 V
18, 19mm,
7/8”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
18, 19mm,
3/4”, 7/8”
18, 19mm,
7/8”
18, 19mm,
3/4”, 7/8”
See Instructions
Ø
3/4”, 7/8”, 11/16” NO DRILL 20
14mm, 11/16” NO DRILL 15
n 88001
n 37042
n 37096
See Instructions
l 51142 Ø,RT,KH
See Instructions
n 88001
n 88001
n 37096
l 51142 Ø,RT
See Instructions
See Instructions
n 06417 †,HM
n 51191 †,HM
7/8”
n 51194 HM
7/8”
7/8”
20
1”, 3/8” 20
1”, 3/8” 20
1”, 3/8”
–
78013
n 37152 Ø
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
5
6
40
74424 78013
BN,HG
n 33058 SD,V
18, 19mm,
7/8”
18, 19mm,
3/4”, 7/8”
1/2”
4
6
20
74424 78013
BN,HG
1/2”
3.5 5
20
4
6
20
74424 78013
BN,HG
5
6
40
3.5 5
20
–
–
–
74664
–
n 44101 V
See Instructions
18, 19mm, 1/2”
3/4”, 7/8”
See Instructions
n 37042
Tribute
3.5 5 20
n 37152 –
–
25
3.5 5 20
n 33058 SD,V
n 37152 Ø
n 44101 V
18, 19mm, 1/2”
7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
18, 19mm, 1/2”
3/4”, 7/8”
40
†,JR
Ø,JR
45
FOOTNOTES
20
6 20
l 44067 –
1998
STANDARD WIRE
6
15, 18,
NO DRILL 5
21mm, 3/4”
T-CONNECTOR
45
l 33051 –
DRILL BITS
6
45
See Instructions
WRENCHES
13/16”,
1/2”
5
7/8”,15/16”
15, 18, 21mm, NO DRILL 5
3/4”, 15/16”
15,18,21mm, 1/2”
5
T-50, 3/4”,
11/16”, 9/16”
15 l 37041
FOOTNOTES
BN
15
HITCH
NUMBER
74190 78058
DRILL BITS
20
WRENCHES
78104
78104
FOOTNOTES
20
HITCH
NUMBER
17mm, 7/8”, NO DRILL 3.5 5
3/4”
13/16”, 7/8”, 1/2”
5 6
15/16”
3/4”
1/2”
5 6
DRILL BITS
n 44553 Ø,HM,JR
WRENCHES
3.5 5 20
–
–
–
n 51092 Ø,RT,HM,JR See Instructions
FOOTNOTES
78104
78104
HITCH
NUMBER
–
–
INSTALL TIME
STYLE
DRILL BITS
50
20
17mm, 7/8”,
3/4”
10, 18mm, NO DRILL 3.5 5
11/16”
See Instructions
35
l 33039 Ø,KH
n 37152 KH
10, 18mm, NO DRILL 3.5 5
11/16”
15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”, 9/16”
40
10, 18mm, NO DRILL 3.5 5
11/16”
15,18,21mm, 1/2”
5 6
T-50, 3/4”,
11/16”,
9/16”
10, 18mm, NO DRILL 3.5 5
11/16”
40
78013
78013
–
78013
–
–
HG,RW
60
See Instructions
n 37042
10, 18mm, NO DRILL 3.5 5
11/16”
See Instructions
n 37096
See Instructions
l 51142 Ø,RT
n 37042
10, 18mm, NO DRILL 3.5 5
11/16”
See Instructions
n 37096
See Instructions
35
l 33039 Ø
n 37152
l 33039 Ø
HG,RW
–
–
60
40
35
n 37152
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
6
60
l 44647 Ø
10, 18mm, 5/8” NO DRILL 3.5 5
25
5
74664 78013
78013
74703 78104
BN, CH
ABBREVIATIONS
AF Hitch is ONLY rated for weight carrying at 3,500 lbs. GTW, 350 lbs. TW and
DO NOT use w/weight distribution spring bars for this specific vehicle, except
for long bed trucks.
JT 2WD models only.
ST Will not fit 2WD models with short bed.
APPLICATIONS GUIDE
1/2”, 3/8” 3.5 5
NO DRILL 3.5 5
–
3.5 5 20
n 44617 –
n 44553 Ø,HM,JR
7/8”
n 51092 Ø,RT,HM,JR See Instructions
n 51033 –
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
500-750 lb TW 5000-7000 lb GTW
WIRING
STYLE
96-98
00-03
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
MPV Van 2 & 4 WD
MPV Van w/Ground Effects
WRENCHES
FOOTNOTES
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
HITCH
NUMBER
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
CLASS II
CLASS I
185
MODEL
MAZDA
MODEL
MAZDA
184
REESE TOWPOWER
08-11
n 06417 †,HM
n 51191 †,HM
7/8”
1”, 3/8”
7/8”
1”, 3/8”
n 51194 HM
7/8”
78113
78113
–
4
50
50
30
–
–
–
78113
78113
78113
–
50
30
–
–
78113
78113
–
50
50
25
50
25
50
25
50
25
50
–
–
–
–
–
–
–
–
–
–
78113
78113
78113
78113
78113
78113
78113
78113
78113
78113
–
–
78104
–
30
–
78058
–
40
40
30 n 51103
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
78058
78058
78058
–
CA,GP
–
–
–
30 n 51103
CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
74428 78104
–
30 n 51103
CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
–
78104
–
–
78058
–
–
–
78104
78104
–
85774 78058
78070 78058
CH
l 44534 MB,TA
n 33027 Ø
ML500
ML550
R320 BlueTEC
R320 BlueTEC w/Panoramic Roof Package
R320 CDI
R320 CDI w/Panoramic Roof Package
R350
R350 w/Panoramic Roof Package
R500
R500 w/Panoramic Roof Package
MERCURY
Capri
06-07
08-11
2009
2009
07-08
07-08
06-11
06-11
06-07
06-07
l 44534 MB,TA
l 44534 MB,TA
79-86 l 77060
X
Colony Park Wagon
83-91 n 77002
CA
Grand Marquis
Grand Marquis Wagon
Marauder
Mariner All, Inc. Hybrid
92-97 n 77002
98-11 n 77002
83-91 n 77002
03-04 n 77002
05-07
08-09
n 44547 Ø,SC
n 44547 SC
n 44547 Ø,SC
n 44547 SC
n 44547 Ø,SC
n 44547 SC
n 44547 Ø,SC
n 44547 SC
CA
CA
CA
CA
3/4”
3/4”
3/4”
3/4”
1/2”
1/2”
1/2”
1/2”
FOOTNOTES
–
–
10-11
02-05
Grand Marquis
STANDARD WIRE
50
30
ML450 Hybrid, All Styles
ML500
1/2”
T-CONNECTOR
4
5
n 33027 Ø
3/4”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
78113
78113
l 44534 MB,TA
l 44534 MB,TA
CA
DRILL BITS
–
–
06-09
10-11
99-01
89-95
96-97
83-91 n 77002
WRENCHES
20
30
–
5
ML350
ML350 Except Blue Tec
ML430
Cougar All Models
Cougar All Models
Grand Marquis
FOOTNOTES
CH
l 44534 MB,TA
n 33027 Ø
CA
HITCH
NUMBER
85774 78058
07-08
03-05
25 n 06043
n 88002
n 06004
n 06004
25 n 06043
n 88002
25 n 06043
n 88002
25 n 06043
n 88002
25 n 06043
n 88002
25 n 06043
n 06417
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
7/8”, 3/4”
25
ML320 CDI
ML350
1/2”
DRILL BITS
10, 18mm, 5/8” NO DRILL 3.5 5
l 44649 Ø,HM
n 33027 Ø
20
WIRING
1250 lb TW 12000 lb GTW
l 44647 Ø
10-11
98-02
3/8”
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
20
20
1”, 3/8” 20
MERCEDES-BENZ
GLK350 All Models
ML320
9/16”, 5/8”,
11/16”
3/4”
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Tribute All, Inc. Hybrid
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
NO DRILL 4
3/4”, 11/16”,
9/16”
10, 16mm, 3/4” NO DRILL 3.5
10, 21mm,
NO DRILL 5
3/4”, 11/16”,
9/16”
10, 16mm, 3/4” NO DRILL 3.5
10, 16mm, 3/4” NO DRILL 3.5 4
10, 21mm, NO DRILL 5 5
3/4”, 11/16”,
9/16”
10, 16mm, 3/4” NO DRILL 3.5 4
10, 21mm,
NO DRILL 5 5
3/4”, 11/16”,
9/16”
10, 16mm, 3/4” NO DRILL 3.5 4
10, 16mm, 3/4” NO DRILL 3.5 4
10, 15, 17mm NO DRILL 3.5
10, 15, 17mm NO DRILL 3.5
10, 15, 17mm NO DRILL 3.5
10, 15, 17mm NO DRILL 3.5
10, 15, 17mm NO DRILL 3.5
10, 15, 17mm NO DRILL 3.5
10, 15, 17mm NO DRILL 3.5
10, 15, 17mm NO DRILL 3.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
See Instructions
Ø
Ø
CA
–
–
See Instructions
CA
See Instructions
CA
See Instructions
30
CA
See Instructions
CA
†,HM
7/8”
1”, 3/8”
n 06417 HM
n 51191 †,HM
7/8”
1”, 3/8”
7/8”
1”, 3/8”
n 51194 HM
n 06417 †,HM
7/8”
n 51191 †,HM
7/8”
7/8”
30 n 51103
20
20
20
1”, 3/8” 20
1”, 3/8” 20
1”, 3/8” 20
CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
l 44647 Ø
3.5 6
13mm, 3/4”
1/2”
10, 18mm,
5/8”
NO DRILL 3.5 5
30
25
CH
Factory Tow
Package
models only
ABBREVIATIONS
JM Some early production 1994 models may require #74667.
JT 2WD models only.
187
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - MERCURY
MAZDA
MAZDA - MERCURY
MODEL
186
REESE TOWPOWER
08-11
Marquis Sedan
Marquis Wagon
Milan
Milan
Montego
79-82
79-82
06-09
10-11
05-07
n 77002 CA
n 77002 CA
Monterey Sedan
Monterey Van
Mountaineer
79-82 n 77002
04-07
97-01
n 77152 GP,JR,TA
n 77239 Ø,GP,JR
CA
7/8”
1”, 3/8”
20
n 51194 HM
7/8”
1”, 3/8”
20
25 n 06043
25 n 06043
12, 13mm, 3/4” 1/2”
45
11/16”
NO DRILL 20
n 06301
3/4”
1/2”
CA
See Instructions
3/4”
1/2”
CA
See Instructions
3/4”
1/2”
n 51179
25 n 06043
n 06989
n 06365
Ø,GP,JR
See Instructions
Ø,JR
Ø
See Instructions
30 n 51103
30
n 33047 CA,GP
10, 18mm,
5/8”
NO DRILL 3.5 5
30
45
6
20
8
8
8
20
20
25
74665 78058
–
78058
74682 78058
BN
NO DRILL 5
8
25
74682 78058
–
–
–
78058
78104
–
20
20
74670 78058
–
20
74657 78013
HG
20
85243 78058
–
–
78013
–
78069 78058
–
30
20
–
78104
–
20
–
78058
20
–
78013
–
20
–
78058
–
–
78058
–
1/2”,
13/16”,
1/2”
5
7/8”,15/16”
15, 18, 21mm, NO DRILL 5
3/4”, 15/16”
15, 18mm, 7/8” NO DRILL 5
92-95 n 77017
Ø,JR
Sable Sedan All Models
04-05
n 51101 Ø,GP,JR
n 06991 Ø,GP,JR
08-09
n 51101 Ø,GP,JR
n 06991 Ø,GP,JR
n 06301 Ø,GP,JR
n 51179 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
Sable Wagon
92-95 n 77017
Ø,JR
n 88002
See Instructions
n 88002
See Instructions
n 06991 Ø,GP,JR
See Instructions
Sable Wagon
00-03 n 77017
Ø,JR
n 51101 Ø,GP,JR
n 06991 Ø,GP,JR
04-05
n 51101 Ø,GP,JR
Tracer All Models
91-96 n 77018
–
Tracer Sedan
1997 n 77018
–
Tracer Sedan
98-99 n 77022
–
Tracer Wagon
1997 n 77018
–
9/16”, 11/16”,
13/16”
9/16”, 11/16”,
13/16”
3/4”, 11/16”,
13/16”
9/16”, 11/16”,
13/16”
–
CH
BN,GC
–
–
–
n 44525 Ø,JR
10, 13, 15mm, NO DRILL 3.5 4
3/4”
30
10, 13, 15mm, 3/4” NO DRILL 30
10, 13, 15mm, 3/4” NO DRILL 20 n 06368 Ø,GP,JR,KH See Instructions
n 88002
See Instructions
Sable Wagon
CH
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
Ø,JR,KH
Ø,JR
CH
See Instructions
86-91 n 77017
96-99 n 77017
–
See Instructions
Sable Wagon
Sable Wagon
FOOTNOTES
6
6
3/4”
STANDARD WIRE
5
n 37012 Ø
13mm, 3/4”
See Instructions
T-CONNECTOR
40
6 15
–
n 06991 Ø,GP,JR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
6
15, 18,
NO DRILL 5
21mm, 3/4”
95-00 n 77009
86-91 n 77017
Ø,JR
DRILL BITS
5
See Instructions
13mm, 3/4”
00-03 n 77017
WRENCHES
–
78058
78022 78104
74724 78104
n 44542 Ø,KL
FOOTNOTES
13/16”, 7/8”, 1/2”
15/16”
3/4”, 15/16” 1/2”
30
30
20
08-10
See Instructions
HITCH
NUMBER
l 33051 Ø,JF
3.5 6
3.5 5
5 6
–
1/2”
30
See Instructions
See Instructions
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
10, 13, 15mm, 3/4” NO DRILL 40
9/16”
35
–
78104
–
9/16”
35
74665 78058
–
1/2”
30
74665 78058
–
9/16”
35
–
–
78013
ABBREVIATIONS
DA Will not fit with tube style bumper.
JT 2WD models only.
TD Hitches without electrical bracket are rated at 350/3500 WC & No WD. Hitch
with electrical bracket rated at 400/4000 WC & No WD.
189
APPLICATIONS GUIDE
1/2”
3.5 6 30
n 44542 Ø,KL
n 88002
–
3/4”
13mm, 3/4” 1/2”
15, 18mm, 7/8” NO DRILL 5
Ø,JR
78058
78058
78104
78104
78104
13mm, 3/4”
CA,GP
3.5 6
l 33031 Ø,KL
l 33031 Ø,KL
96-99 n 77017
Factory Tow
Package
models only
n 33047 CA,GP
n 44129 GP,JR
30
30 n 51103
25
15 l 37041
1/2”
02-03
04-05
06-07
78070 78058
30
13mm, 3/4”
Mountaineer
Mountaineer
Mountaineer
Models w/1-1/4 Receivers Only
Mountaineer
Models w/1-1/4 Receivers Only
Mystique
See Instructions
CH
10, 13, 15mm, NO DRILL 3.5 4
3/4”
3.5 6 30
n 44100 Ø
n 88002
85774 78058
n 44525 Ø,JR
13mm, 3/4” 1/2”
l 37051 Ø,JF
l 44067 Ø,JF
1/2”
30
10, 13, 15mm, 3/4” NO DRILL 20 n 06368 Ø,GP,JR,KH See Instructions
n 88002
See Instructions
25
–
–
85731
85731
–
CA,GP
n 51033 Ø
Ø,JR,KH
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
l 44647 Ø
10, 13, 15mm, 3/4” NO DRILL 30
Ø,GP,JR
CA
HITCH
NUMBER
INSTALL TIME
STYLE
n 06417 HM
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL
MERCURY
MERCURY
MODEL
188
REESE TOWPOWER
19mm, 11/16”
1/2”
n 77110 EP
n 77110 EP
19mm, 11/16”
1/2”
19mm, 11/16”
1/2”
MITSUBISHI
Eclipse All, Inc. Spider
00-05 n 77093
AE
Eclipse
Endeavor
06-12 n 77130
04-05
TA
Endeavor
Galant
Lancer
06-08
07-11 n 77209
02-03 n 77032
Lancer All, Except Evolution
Montero not Inc. Montero Sport
Montero Sport
Outlander
08-10 n 77192
01-06
97-04
03-06 n 77048
Outlander
Outlander All, Except Outlander Sport
Outlander Sport All Styles
07-10
11-12
2011
Raider
06-09
RVR Canada Only
2011
NISSAN
200-SX
Altima
Altima
Altima
97-98
93-97 n 77112
98-01 n 77112
02-06 n 77162
Altima 4 Dr. Sedan
07-12 n 77168
AE,HM,TA
Altima 2 Dr. Coupe
Armada
08-12 n 77172
04-07
Ø,HM
Armada
08-11
Cube
Frontier Pickup All, Inc. Desert Runner
09-11 n 77233
98-03
10, 12, 14mm,
11/16”
10mm, 11/16”
20
30 n 06961
30 n 06961
30 n 06961
n 06968
1/2”
40
15/32”
30
See Instructions
Ø,JR
See Instructions
Ø,JR
See Instructions
Ø,JR
See Instructions
15
15
15
15
n 33001 Ø,JR
n 33001 Ø,JR
18mm
n 33001 Ø,JR
n 33017 Ø,JR
18mm
n 33080 Ø,JR
n 44561 Ø,JR
Ø,JR,KH
9/16”, 3/4”
–
10mm, 11/16”,
3/4”
10mm, 7/8”
Ø,GP
14, 17mm,
3/4”, 7/8”
l 06131 Ø,HM
HM,JR
14, 17mm,
3/4”, 7/8”
22mm, 1-1/8” NO DRILL 5
8 20
n 33092 Ø,HM
9/16”, 11/16”,
3/4”
16mm, 11/16”,
5/8”
3/4”
Juke AWD Only
Maxima Sedan
Maxima Sedan
Maxima Sedan
Maxima All Models
2011
95-99
00-02
2003
04-08
Maxima All Models
09-11 n 77168
7/16”
5.5 25
5.5 20
17mm, 3/4”
17mm, 3/4”
NO DRILL 4
NO DRILL 4
4
4
25
25
22mm, 1-1/8” NO DRILL 5
8
20
NO DRILL 30
n 37042
n 37096
See Instructions
See Instructions
n 77248 Ø,HM,JR
l 77028 TA
17,18,19mm
7/8”
NO DRILL 40
1/2”
30
l 77028 TA
l 77028 TA
7/8”
1/2”
n 77162 Ø,JR,TA
9/16”, 11/16”,
3/4”
16mm, 11/16”,
5/8”
7/8”
See Instructions
30
1/2”
30
NO DRILL 30
7/16”
45
n 37042
n 37096
See Instructions
n 51147 Ø,GP
19mm
NO DRILL 5
8 30
–
–
78013
–
–
–
78104
78104
–
85743 78104
74697 78104
–
78104
CH
–
85252
–
85315
78104
78013
78013
78104
–
85745 78104
85745 78104
85758 78104
CH
74187 78058
85253
85758 78104
BN
w/ Factory
7-Way
–
–
74218
–
78013
78013
78013
78104
–
78094 78104
CG
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
78013
78013
–
–
–
BN,HG
–
–
CG
–
BN,HG
–
HG
CH
CH
CH
–
HG
–
NO DRILL 6
10 15
78094 78013
74682 –
CG
19mm
l 44674 Ø, HM
l 44596 Ø
19mm
NO DRILL 6
NO DRILL 6
10 15
10 15
74682 –
Factory 7-Way
models only
See Instructions
85713 78013
74219 78013
CG
n 33048 –
n 37152
74219 78013
BN,HG
85757
85763
85755
–
–
–
78094
BN, BN,
Fact. 7-Way
models only
n 33048 –
n 37152
See Instructions
–
–
74219
–
l 37091 Ø
18mm
16, 17mm, 11/16” 1” hole saw 45
See Instructions
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
10, 17, 19mm NO DRILL 5
17mm
NO DRILL 5
45
n 88001
AE,HM,TA
25
NO DRILL 30
n 88001
05-11
NO DRILL 3.5
12, 14, 17mm, 3/4” NO DRILL 20
12, 14, 17mm, 3/4” NO DRILL 20
2004
Frontier Pickup
20
30
n 44148 –
Frontier Pickup All, Inc. Desert Runner
NO DRILL 3.5 5
30
n 51138 Ø,HM
Ø,JR,TA
12, 13 (x2),
17mm
12, 17mm
NO DRILL 3.5 5
NO DRILL 3.5 5
20
20
20
15
10mm, 13mm, 14, NO DRILL 40
17mm
l 06131 Ø,HM
Ø,HM,JR
10, 19mm
NO DRILL 3.5 5
NO DRILL 3.5 5
NO DRILL 30
n 44579 Ø,HM,JR
n 44579 Ø,HM,JR
Ø,HM,JR
18mm
1250 lb TW 12000 lb GTW
NO DRILL 30
1/2”
15
n 33028 Ø,KH
n 33044 Ø,GP
Ø,KH
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
Ø,JR
500-750 lb TW 5000-7000 lb GTW
WIRING
STANDARD WIRE
See Instructions
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 77078 †,GP,JR
n 77110 EP
CLASS V
T-CONNECTOR
98-99
93-97
1998
99-02
STYLE
YEAR
MODEL
Tracer Wagon
Villager Mini Van
Villager Mini Van
Villager Mini Van
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
n 44148 –
n 44526 Ø,GP
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
See Instructions
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm
4
5
5
6
30
35
4
5
30
4
5
5
6
30
35
4
5
8
30
30
NO DRILL 5
78013
78058
78104
78013
78013
78104
78104
78107 78104
Factory 7-Way
models only
BN,HG
CH
–
–
–
CH
CH
ABBREVIATIONS
E ModuLite® required.
JT 2WD models only.
191
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL
MERCURY
- NISSAN
MERCURY - NISSAN
MODEL
190
REESE TOWPOWER
03-07
n 33069 Ø,JR
n 44583 Ø,JR
12, 17, 19mm NO DRILL 3.5
12, 17, 19mm NO DRILL 3.5
Murano
09-11
n 44600 Ø,GP,JR
NV1500
NV2500 HD
NV3500 HD
Pathfinder 2 & 4 Dr.
Pathfinder 2 & 4 Dr.
2012
2012
2012
87-95
96-04
n 44664 Ø,HM
n 44664 Ø,HM
10, 16, 17,
19mm
17mm
n 44664 Ø,HM
n 44152 HM,JR
40
20
See Instructions
See Instructions
Pickup (App. starts with 86-1/2)
86-87
n 88001
See Instructions
l 51046 Ø,HM
n 37042
Pickup
88-97
n 88001
See Instructions
n 37042
Quest Mini Van
Quest Mini Van
Quest Mini Van
Quest Mini Van
Quest Mini Van
93-97 n 77110
1998 n 77110
99-02 n 77110
04-09
2011
Rogue All, Except Krom
Sentra All, Inc. SE-R & SE-R SPEC V
Sentra All, Inc. SE-R & SE-R SPEC V
Sentra
Titan Pickup Crew Cab 5.6 ft. Bed
08-12
00-02 n 77126
03-06 n 77126
07-12 n 77166
04-11
Titan Pickup Crew Cab 7.25 ft. Bed
EP
19mm, 11/16”
1/2”
EP
19mm, 11/16”
1/2”
EP
19mm, 11/16”
1/2”
30 n 06961
30 n 06961
30 n 06968
Ø,JR
See Instructions
Ø,JR
See Instructions
Ø,JR
See Instructions
NO DRILL 5
5.5 20
l 33050 Ø
n 44132 Ø
17mm
See Instructions
n 37152
See Instructions
n 33048 –
n 37152
n 44148 –
n 33001 Ø,JR
15
15
15
n 33001 Ø,JR
n 33017 Ø,JR
n 33079 Ø,JR
l 44663 Ø,HM,JR
n 44592 Ø,GP
17mm
17mm
NO DRILL 7.5 10 20
NO DRILL 7.5 10 20
NO DRILL 7.5 10 20
3.5
17mm
NO DRILL 5
17mm
NO DRILL 5
15,18,21mm, 1/2”
5
5
5.5
5.5
6
40
20
20
30
4
5
5
6
30
30
4
5
NO DRILL 3.5
30
20
20
15
20
35
NO DRILL 3.5
20
T-50, 3/4”,
11/16”, 9/16”
See Instructions
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
18mm
18mm
30
30
35
NO DRILL 4
See Instructions
NO DRILL 3.5 5
NO DRILL 3.5 5
NO DRILL 3.5 5
10, 12, 18mm NO DRILL 3.5 5
10, 19mm
18, 19mm,
6” ratchet
extension
18, 19mm
FOOTNOTES
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STANDARD WIRE
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
Murano
n 06048 –
n 06061 Ø,HM
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
Dealer
–
78107 78104
CH
85775
85775
85775
74494
74218
CH
–
78104
78104
78104
78013
78013
CH
CH
CH
HG
74494 78013
BN,HG
74494 78013
BN,HG
–
74219
–
78093
85770
78013
–
–
78104
78104
–
78104
78013
78013
78104
78058
CH
BN,HG
–
CH
BN,CH
l 51106 Ø,RT
19mm
NO DRILL 6
10 15
l 37092 Ø
19mm
NO DRILL 6
10 15
78108
–
–
78094
74682
04-11
l 51106 Ø,RT
19mm
NO DRILL 6
10 15
l 37092 Ø
19mm
NO DRILL 6
10 15
74682 78058
Factory 7-Way
models only
Titan Pickup King Cab 6.5 ft. Bed
04-11
l 51106 Ø,RT
19mm
NO DRILL 6
10 15
l 37092 Ø
19mm
NO DRILL 6
10 15
74682 78058
Factory 7-Way
models only
Titan Pickup King Cab 8 ft. Bed
04-11
l 51106 Ø,RT
19mm
NO DRILL 6
10 15
l 37092 Ø
19mm
NO DRILL 6
10 15
74682 78058
Factory 7-Way
models only
Versa Hatchback
Versa Sedan
Xterra
07-12 n 77170
07-11 n 77170
00-04
85768 78104
85768 78104
74897 78058
CH
Xterra
05-12
BN, BN,
Fact. 7-Way
models only
X-Trail All Models (Canada Only)
OLDSMOBILE
88 RWD
88 RWD
88 RWD
88
88 FWD
98
98
98 FWD
98 Regency
98 Regency
98 Regency FWD
05-06 n 77096
85757 78058
85763
–
78013
–
–
–
78058
78058
78104
–
–
–
–
–
–
–
–
78013
78058
78058
78058
78058
78058
78058
–
98 Regency Includes Touring Sedan
98 Regency Includes Touring Sedan
1977
78-79
80-85
86-95
86-89
1977
78-84
86-89
1977
78-84
86-89
1990
91-96
Ø,TA
3/4”, 7/8”, 11/16” NO DRILL 20
3/4”, 7/8”, 11/16” NO DRILL 20
TA
3/4”, 7/8”, 11/16” NO DRILL 30
Ø,TA
HM
3/4”
1”
HM
3/4”
1”
25
25
l 51109 Ø,RT
Ø,EP
10, 16, 17mm
NO DRILL 45
n 06003 –
n 06003 –
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
n 06003 –
n 88002
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
See Instructions
n 06615 AO,GP
n 06003 –
7, 13, 15mm, 11/16” 1/2”
n 06003 –
n 06003 †,AO
n 06003 –
n 06003 –
n 06615 †,AO
n 88002
30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 40
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
7, 13, 15mm, 11/16” 1/2”
40
See Instructions
3.5 5.5 15
l 33019 Ø
7/8”
NO DRILL 3.5 5.5 15
n 44529 Ø
18, 19mm
NO DRILL 3.5 5.5 30
–
–
CH
Factory 7-Way
models only
CH
BN, Fact.
7-Way
models only
–
–
–
–
–
–
–
–
–
See Instructions
n 06073 –
n 88002
3/4”, 9/16”
n 06073 –
n 88002
3/4”, 9/16”
1/2”
40
–
–
–
1/2”
40
–
–
–
See Instructions
See Instructions
ABBREVIATIONS
ABRequires four (4) 3/8" spacer blocks (#01077-011) for installation (sold separately).
EO Requires longer ball mount.
HA External dress panel beneath 95-97 and 03-05 vehicles must be removed for
hitch installation.
JT 2WD models only.
JV Rubber air deflector/fascia must be removed or trimmed to install hitch.
193
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - OLDS
NISSAN
NISSANMODEL
- OLDS
192
REESE TOWPOWER
REESE TOWPOWER
92-98
99-04
95-99
00-03
n 06027 Ø,JR,KH
n 06299 –
See Instructions
n 06285 GP,JR
n 06976 HM,JR
See Instructions
n 51173 HM,JR
Bravada
Bravada
n 88002
n 06955 Ø,GP
91-94
96-97
30
18mm, 7/8”
l 37041
See Instructions
APPLICATIONS GUIDE
n 06955 Ø,FP,GP,KK 18mm, 7/8”
99-01
18mm, 1-1/8” NO DRILL 4
6 15
n 33021 Ø
l 37051 JT
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
l 37041
See Instructions
6 15
n 44098 Ø,HM
18mm, 1-1/8” NO DRILL 4
6 15
n 33021 Ø,FP,KK
l 37051 FP,JT,KK
l 37041
See Instructions
6 15
6 15
n 33021 Ø,FP,KK
l 37051 FP,JT,KK
18mm, 7/8”
NO DRILL 3.5 6
NO DRILL 4 6
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
18mm, 1-1/8” NO DRILL 4
3/4”
1/2”
5
Custom Cruiser Wagon Full Size 77-90
Custom Cruiser Wagon Full Size 91-92
Cutlass RWD
Cutlass 4 Dr., FWD
Cutlass Ciera FWD
Cutlass Ciera FWD
Cutlass Ciera Cruiser Wagon RWD
Cutlass Ciera Cruiser Wagon FWD
78-80
97-00 n 77076
85-88
89-96
78-83
84-96
Cutlass Supreme 4 Dr. RWD
Cutlass Supreme 2 Dr. RWD
Cutlass Supreme 2 Dr. FWD
81-87
81-88
88-93 n 77001
Cutlass Supreme
2 Dr. FWD w/Aero Sport Pkg.
92-97 n 77001
Ø,GP
13mm, 3/4”
n 06409 –
n 06409 –
See Instructions
n 88002
n 06407 –
See Instructions
NO DRILL 15 n 06249 –
n 06220 JR,X
n 06220 JR,X
n 06407 –
n 06054 Ø,AI,FM
n 88002
n 06407 –
n 06407 –
30
30
See Instructions
30
20
See Instructions
40
See Instructions
40
9/16”, 11/16”, 7/8” 3/8”
30
13mm, 7/8”
NO DRILL 40
9/16”, 11/16”, 7/8” 3/8”
See Instructions
n 33007 –
13mm, 14mm, 13/32”
3/4”
6
6
6
6
6
6
6
6
6
6
6
60
15
20
30
20
15
20
30
20
15
20
30
20
3.5 10 40
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
n 33014 Ø
l 33015 Ø,SD
18mm
6 15
WIRING
1250 lb TW 12000 lb GTW
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
74491 78058
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
See Instructions
See Instructions
90-91
10, 15mm, 11/16” 1/8”, 7/16”, 40 n 06411 AI,JR,TA
9/16”
n 06305 AW,FE,
30
30
60
See Instructions
60
–
–
–
92-93
n 06305 AW,FE,
See Instructions
60
–
–
–
AI,JR,TA
See Instructions
60
–
–
–
94-97
n 06305 AW,FE,
See Instructions
60
–
–
–
Delta 88
Delta 88
Delta 88
Delta 88 FWD
1977
78-79
80-85
86-89
n 06003 –
n 06003 –
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
7, 13, 15mm,
1/2”
30
11/16”
See Instructions
–
–
–
–
–
n 06003 –
n 06615 AO,GP
–
–
–
–
Delta 88
90-91
AI,JR,TA
HB,JR,TA
HB,JR,TA
AI,JR,TA
10, 15mm, 11/16” 1/8”,
7/16”,
9/16”
40 n 06411
HB,JR,TA
n 88002
n 06073 –
n 88002
n 06615 AO,GP
Delta 88
Delta 88
Intrigue
92-95 n 77070
96-99
98-02 n 77109
LSS
LSS
90-91
92-95 n 77070
LSS
96-99
JR
TA
JR
10, 13, 15mm, 9/16” 1/2”
7/8”
10, 13, 15mm,
9/16”
1/2”
1/2”
20 n 06367
n 88002
n 06615
n 06306
30 n 06384
n 51183
n 06073
20 n 06367
GP,JR
9/16”, 11/16”, 7/8” 3/8”
9/16”, 11/16”, 7/8” 3/8”
–
–
–
–
–
1/2”
40
–
–
–
7, 13, 15mm, 11/16” 1/2”
30
40
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3/4”, 9/16”
See Instructions
10, 13, 15mm, 9/16” 1/2”
See Instructions
AO,GP
7, 13, 15mm, 11/16” 1/2”
GP,KH
See Instructions
GP,JR
3/4”, 7/8”
1/2”
GP,JR
3/4”, 7/8”
1/2”
–
3/4”, 9/16”
1/2”
GP,JR
10, 13, 15mm, 9/16” 1/2”
30
30
30
30
40
40
See Instructions
30
n 06306 GP,KH
–
–
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
Bravada
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
1/2”
n 06955 Ø,FP,GP,KK 18mm, 7/8”
1998
DRILL BITS
1/2”
n 51031 Ø,HM
Bravada
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
See Instructions
40
20
35
30
See Instructions
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Achieva
Alero
Aurora
Aurora
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
195
MODEL
OLDS
MODEL
OLDS
194
REESE TOWPOWER
REESE TOWPOWER
86-96
97-98
90-91
92-95 n 77070
96-99
90-92
Silhouette
93-96
Silhouette All, Inc. AWD
97-04 n 77040
n 88002
n 06306 GP,KH
JR
10, 13, 15mm, 9/16” 1/2”
AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
APPLICATIONS GUIDE
PLYMOUTH
Acclaim
89-95
n 06097 –
Breeze
96-00
n 06977 JR
Grand Voyager
84-90
n 06080 GW,GP
n 88001
n 06080 GP
91-95
96-00 n 77012
Ø,HM
18, 19mm
n 88001
Voyager
Voyager Short Wheelbase, 2 & 4 WD
Voyager Short Wheelbase, 2 WD Only
Voyager All, Inc. 4 WD
95-99 n 77121
00-01 n 77052
74-85
–
See Instructions
GP,JR
7/8”
1/2”
91-95
91-95
96-00 n 77012
18, 19mm
PONTIAC
6000 All, Except AWD Models
6000 Wagon
Aztek All, Inc. AWD
Bonneville
Bonneville
Bonneville
Bonneville Sedan
85-91
84-91
01-05
1977
78-81
80-81
82-86
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
–
1/2”
40 n 51079
n 33094 AL,JR
1/2”
3.5 5
40
74207 78013
HG
1/2”
40
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
40
13mm, 9/16”,
3/8”
11/16”
13, 16, 17mm, 3/4”, 1/2”
9/16”, 11/16”
See Instructions
40
–
78104
40
–
78013
3.5 3.5 30
5 6 30
–
78058
3.5 3.5 30
74187 78058
BN
74658 78013
BN
–
AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 44574 AL,JR
30 n 37042
n 33046 †,JT
n 37152 JT
See Instructions
See Instructions
n 33046 †
30
See Instructions
18, 19mm
NO DRILL 30 n 51062 HM
n 37042
See Instructions
11/16",7/8"
n 88001
See Instructions
n 88001
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
74492 78104
n 06080 GW,GP
n 88001
DRILL BITS
3.5 3.5 30
19mm, 3/4” 1/2”
3.5 3.5 30
n 33045 –
n 37152
See Instructions
n –
n 37081 M,TH
Ø,HM
WRENCHES
13mm,9/16" 1/2”
3/4"
1/2”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
3/4"
1/2”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
15, 17, 18,
19mm, 7/8”
15,18,21mm,
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4”
1/2”
5
6
30
7/16”
3.5 5
30
1/2”
5
40
1/2”
3.5 3.5 30
6
30
20
n 06080 GW,GP
FOOTNOTES
n 33068 †,AL
86-88
86-88
91-95
HITCH
NUMBER
40
n 37081 M,TH
84-90
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
1/2”
See Instructions
n 44006 HM
Neon 2 & 4 Dr.
Neon 2 & 4 Dr.
Trailduster
Trailduster All, Except w/Skid Shield
Trailduster
Voyager
DRILL BITS
3.5 3.5 30
10, 13, 15mm, 9/16” 1/2”
n 37152
Grand Voyager All, Inc. 4 WD
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
13mm,9/16" 1/2”
1/2”
15/32"
See Instructions
11/16",7/8"
18, 19mm
15/32"
–
30 n 37042
n 37096
See Instructions
n 37042
n 37096
See Instructions
30 n 37096
n 37096
30 n 51062
See Instructions
See Instructions
n 06220 JR,X
n 06054 Ø,AI,FM
See Instructions
n 06457 –
9/16”, 11/16”,
3/4”
13mm, 7/8”
n 33046 †,JT
n 37152 JT
See Instructions
n 33046 †,JT
n 37152 JT
See Instructions
n 44618 –
n 33046 –
See Instructions
HM
19mm, 3/4” 1/2”
3.5 3.5 30
n 33045 –
n 37042
See Instructions
n 37152
n 37096
See Instructions
n 44006 HM
n 06003 –
n 06003 –
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
n 06003 –
n 06407 –
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 11/16”, 7/8” 3/8”
30
9/16”,
3/8”
11/16”, 3/4”
3.5
40
–
–
–
–
13, 18, 19mm, NO DRILL 5
7/8”
10 45
6
10 40
10 45
74182 78058
74182 78058
–
3.5 3.5 30
5 6 30
74182 78058
–
3.5 3.5 30
5 6 30
74187 78058
BN
3.5 5 30
3.5 3.5 30
3.5 5 30
74187 78058
74187 78058
74658 78013
BN
–
78104
–
78107
85261 78058
–
–
–
–
–
–
13, 18, 19mm, NO DRILL 5
7/8”
3/4"
1/2”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
3/4"
1/2”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
See Instructions
3/4"
1/2”
15, 17, 18, 7/16”
19mm, 7/8”
15,18,21mm, 1/2”
T-50, 3/4”,
11/16”, 9/16”
19mm, 3/4” 1/2”
5
6
n 33061 Ø
15mm, 3/4”
n 44538 –
9/16”, 1/16”, 3/8”
3/4”
78058
78058
78058
–
–
–
–
–
–
BN
HG
40
3.5 3.5 30
40
NO DRILL 40
3/8”
40 n 51151 HM
–
–
–
–
–
NO DRILL 3.5 –
3.5
55
–
BN
40
78058
78058
78058
78058
–
–
–
ABBREVIATIONS
JT 2WD models only.
RW On some models it may require an upgraded flasher or Power Module.
APPLICATIONS GUIDE
n 33068 †,AL
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
n 51102 AL,GP,JR
Grand Voyager
1/2”
–
–
–
–
–
n 06302 AL,JR
AL,GP,JR
1250 lb TW 12000 lb GTW
30
40
40
30
40
See Instructions
3/4”, 9/16”
30 n 06302
WIRING
See Instructions
n 06073 –
20 n 06367 GP,JR
n 06306 GP,KH
n 06302 AL,JR
CLASS V
500-750 lb TW 5000-7000 lb GTW
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Regency
Regency
Royale
Royale
Royale
Silhouette
FOOTNOTES
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
197
MODEL
OLDS
- PONTIAC
OLDS - PONTIAC
MODEL
196
REESE TOWPOWER
REESE TOWPOWER
92-95 n 77070
JR
10, 13, 15mm,
9/16”
1/2”
20 n 06367
APPLICATIONS GUIDE
G5 Pursuit GT 4 Dr. (Canada Only)
05-07
05-07
05-07
05-07
Grand Am All Models
Grand Am w/Steel Bumper Reinforcement
Grand Am All, Inc. GT Models
Grand Am All, Inc. GT Models
Grand Prix
78-80
78-80
92-98
99-05
78-87
Grand Prix All, Except SE & Turbo
88-90 n 77001
Grand Prix 2 & 4 Dr., Except Turbo
Grand Prix 4 Dr. STE
3/4”, 7/8”
1/2”
–
3/4”, 7/8”
1/2”
JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
JR
3/4”
1/2”
JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
Ø,JR,KH
10, 13, 15mm,
11/16”, 3/4”
NO DRILL 45
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
78058
78058
78013
78013
78058
–
60
–
78104
–
60
–
78104
–
60
–
78104
–
n 06305 AW,FE,HB, See Instructions
60
–
78013
–
60
–
78013
–
n 06027 Ø,JR,KH
n 06299 –
See Instructions
n 06407 –
9/16”, 11/16”,
7/8”
See Instructions
n 06003 –
Le Mans All Models
78-81
n 06407 –
Le Mans w/Steel Bumper Reinforcement
78-81
n 06407 –
Le Mans Wagon
78-81
n 06407 –
Montana All, Inc. AWD
99-05 – 77040
9/16”, 11/16”, 7/8” 3/8”
3/8”
30 n 06353
NO DRILL 20 n 06262 JR
1/2”
30 n 06302
AL,GP,JR
n 06302 AL,GP,JR
n 51102 AL,GP,JR
n 06302 AL,GP,JR
–
30
30
30
–
–
–
–
–
–
CG
–
–
–
–
–
–
–
–
–
–
1/2”
30
35
–
–
78058
78058
–
3/4”, 7/8”
9/16”, 5/8”,
11/16”
9/16”, 11/16”,
7/8”
9/16”, 11/16”,
7/8”
9/16”, 11/16”,
7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
3/8”, 1/2” 30
–
78058
–
3/8”
30
–
78013
–
3/8”
30
–
78013
–
3/8”
30
–
78058
–
1/2”
40 n 51079
74207 78013
HG
1/2”
40
n 44574 AL,JR
1/2”
40
n 33094 AL,JR
85344 78058
HG
1/2”
40 n 51079
AL,GP,JR
1/2”
40 n 51079
AL,GP,JR
85344 78058
BN
JR
n 51102 AL,GP,JR
Montana SV6 All, Inc. AWD (Canada Only) 07-09
HITCH
NUMBER
–
–
–
–
–
9/16”, 11/16”, 7/8” 3/8”
77-81
05-06
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
30
30
40
20
30
n 06407 –
n 06407 –
97-03 n 77109
97-08 – 77077
Montana SV6 All, Inc. AWD
DRILL BITS
–
Grand Prix SE Sedan
Grand Prix GT
Coupe & Sedan Inc. GTP Package
Grand Ville
1/2”
WRENCHES
74716 78058
–
78013
10mm, 9/16”, 3/4” 1/2”
JR,TA
10, 15mm,
3/4”, 7/8”
FOOTNOTES
–
JR,TA
AL,GP,JR
STYLE
78043 78058
JR,TA
9/16”, 11/16”,
7/8”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
–
30
30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 5/8”, 11/16” 3/8”, 1/2” 30
10, 15mm, 11/16” 1/8”, 7/16”, 40 n 06411 AI,JR,TA
9/16”
91-93 n 77001 AI,AY,JR,TA 10, 15mm, 11/16” 1/8”, 7/16”, 40 n 06411 AI,AY,JR,TA See Instructions
9/16”
91-93
7/8”
DRILL BITS
78043 78058
78043 78058
78043 78058
AI,AY,JR,TA
Ø,TA
WRENCHES
–
n 06463 GP
TA
FOOTNOTES
78058
78058
78058
78104
78104
78104
78104
78058
78058
78058
78058
15, 17mm,
1/2”
9/16”, 3/4”
15, 17mm,
1/2”
9/16”, 3/4”
9/16”, 11/16”, 7/8” 3/8”
30
30
40
25
25
40
40
25
25
25
25
–
Grand Prix 2 Dr. SE w/Sport Appearance 91-96
Package & GT Models
94-96
Grand Prix 2 & 4 Dr.
HITCH
NUMBER
–
–
–
–
–
–
–
85709
78043
78043
78043
n 06003 –
05-09
08-09 n 77193
INSTALL TIME
STYLE
–
n 06407
n 06003 –
G6 All Models
G8 All Models
DRILL BITS
78104
78104
–
– 77097
– 77097
n 77122
n 77132
n 51164
n 77122
n 77122
n 77132
n 51164
n 77132
n 51164
30
–
–
10, 13, 15mm,
9/16”
7, 13, 15mm,
11/16”
See Instructions
AL,GP,JR
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 33094 AL,JR
1/2”
3.5 5 40
n 44574 AL,JR
1/2”
3.5 5 40
n 33094 AL,JR
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
40
1/2”
3.5 5
40
1/2”
3.5 5
40
1/2”
3.5 5
40
1/2”
3.5 5
40
–
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
G5 Pursuit 2 Dr. (Canada Only)
G5 Pursuit 4 Dr. (Canada Only)
G5 Pursuit GT 2 Dr. (Canada Only)
82-83
1977
78-81
93-96
97-02
93-96
97-02
2009
2009
07-09
07-09
1/2”
–
n 51173 HM,JR
Bonneville Wagon
Catalina
Catalina
Firebird Inludes Formula
Firebird Inludes Formula
Firebird Trans Am
Firebird Trans Am
G3 5 Dr.
G3 Wave 5 Dr. (Canada Only)
G5 All, Except GT
G5 GT
40
WIRING
1250 lb TW 12000 lb GTW
78104
n 06306 GP,KH
n 06976 HM,JR
96-99
00-05
1/2”
CLASS V
500-750 lb TW 5000-7000 lb GTW
–
GP,JR
n 06615 AO,GP
Bonneville All, Except SLE, SSE & SSEi
Bonneville All Models
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Bonneville All, Except SSE & SSEi
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
199
MODEL
PONTIAC
PONTIAC
MODEL
198
REESE TOWPOWER
n 51102 AL,GP,JR
Parisienne
83-86
n 06003 –
Parisienne Wagon
Safari Wagon Full Size
Solstice
Solstice GXP
Solstice
Solstice GXP
Sunbird
Sunbird GT
Sunfire All, Except GT
83-86
77-89
06-08
07-08
2009
2009
88-94
88-89
95-99
n 06409 –
n 06409 –
Sunfire All Models
Sunfire All Models
Sunfire GT
Torrent
Torrent
Trans Sport Van
Trans Sport Van
Trans Sport Van
Trans Sport Van All, Inc. Montana
Vibe All, Except GT Models
Wave 5 Dr. (Canada Only)
SAAB
9-2X Aero & Linear
9 - 3 All Styles
9-3 Convertible Only
9-5
SATURN
Astra 3 Dr. Hatchback
Astra 5 Dr. Hatchback
Aura
Ion All, Except Redline & Models w/2.4 Liter Engine
Ion 3 w/2.4 Liter Engine
Ion Redline
L Series All Models
L Series Wagon Only
Outlook
Relay All, Inc. AWD
3.5 5
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
1/2”
40
30
30
–
–
–
–
–
–
–
–
–
–
78058
78058
78058
78058
78058
78013
78013
78058
–
–
–
78058
78058
–
–
–
78028 78013
–
74709 78013
CE
–
74492
74492
74207
78058
78058
78058
78013
–
NO DRILL 15
NO DRILL 15
78008 78013
CG
78010 78104
CH
11/16”, 3/8”, 1/2” 7/16”
n 77101 †,TA
n 77101 †,TA
See Instructions
n 77049 GP,JR
n 51163 GP,JR
13mm, 9/16”, 11/16” 7/16”
11/16”, 3/8”, 1/2” 7/16”
11/16”, 3/8”, 1/2” 7/16”
See Instructions
13mm, 9/16”, 11/16” 7/16”
JR,KH
13mm, 9/16”, 11/16” 1/2”
GP,JR
13mm, 9/16”, 11/16” 7/16”
GP,JR
13mm, 9/16”, 11/16” 7/16”
JR,KH
13mm, 9/16”, 11/16” 1/2”
See Instructions
35
35
40
40
30
30
40
40
40
40
40
40
07-09
n 06391 Ø,HM
18, 19mm, 3/4”
n 51185 Ø,HM
18, 19mm, 3/4”
NO DRILL 25
n 06391
Ø,HM
18, 19mm, 3/4”
NO DRILL 25 n 51193
n 51185 Ø,HM
18, 19mm, 3/4”
NO DRILL 25
18, 19mm, 3/4” NO DRILL 3.5 4
30
n 44637 Ø,HM
n 44630 Ø,†,HM
Ø,HM
18, 19mm, 3/4” NO DRILL 3.5 4
30
n 44637
Ø,HM
n 44630 Ø,†,HM
n 33068 †,AL
n 33068 †,AL
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
–
n 77206 HM,JR
n 77206 HM,JR,X
AL,GP,JR
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
FOOTNOTES
n 44574 AL,JR
40
78058
1/2”
n 06091 AL,GP
30 n 06302 AL,GP,JR
n 51102 AL,GP,JR
Vibe All, Inc. GT Models
1/2”
WIRING
1250 lb TW 12000 lb GTW
–
11/16”, 3/8”, 1/2” 7/16”
90-92
1993
94-96
97-98 n 77040
10, 15mm,
3/4”, 7/8”
9/16”, 5/8”,
11/16”
See Instructions
CLASS V
500-750 lb TW 5000-7000 lb GTW
3/8”, 1/2” 30
n 77206 Ø,HM,JR
n 77206 Ø,HM,JR,X
00-02 n 77069
03-05 n 77049
n 51163
95-99 n 77069
2006
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
40
40 n 51079
1/2”
40
AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
18, 19mm,
3/4”
18, 19mm,
3/4”
18, 19mm,
3/4”
18, 19mm,
3/4”
13mm,9/16"
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
n 33068 †,AL
n 33094 AL,JR
13mm,9/16" 1/2”
1/2”
3.5
3.5
3.5
3.5
n 44574 AL,JR
1/2”
3.5 5
1/2”
13mm,9/16" 1/2”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
3.5
3.5
3.5
5
30
30
30
40
–
–
–
–
–
–
–
–
–
CG
–
–
–
40
03-08 n 77183
n 51169
09-10 n 77183
n 51169
04-08 – 77097
Ø,HM
19mm
Ø,HM
19mm
Ø,HM
19mm
Ø,HM
19mm
NO DRILL 15
NO DRILL 15
–
3/4”, 7/8”
1/2”
30
–
–
–
05-06 n 77134
Ø,JR
14, 16, 17mm,
5/8”
NO DRILL 30
–
78104
–
–
–
–
–
78104
78013
–
–
–
74700
–
–
78104
78104
78013
78013
78013
–
–
78013
–
–
–
74711
85344
78013
78013
78104
78058
–
–
78104
–
–
78013
–
n 06135 JR
n 06135 JR
99-02
2003
99-05
08-09
08-09
07-09
03-07
05-07
n 06136 Ø,TA
n 77180 Ø,GP,JR
n 77180 Ø,GP,JR
n 77050 JR
n 77132 HM,JR
3/4”
1/2”
3/4”
1/2”
n 51164 HM,JR
04-06 n 77132 HM,JR
n 51164 HM,JR
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
00-02 n 77113
03-04 n 77113
07-09
05-07
TA
3/4”
1/2”
TA
3/4”
1/2”
n 51102 AL,GP,JR
HM,JR,
KH,TA
SC Series 2 Dr. Coupe
96-02 n 77014
HM,JR,
KH,TA
1/2”
13mm, 11/16”
deep socket
13mm, 11/16”
deep socket
11/16”, 3/4”
1/2”, 3/8” 45
35
25
25
25
25
35
35
n 06302 AL,GP,JR
91-95 n 77014
1/2”
11/16”, 3/4”
11/16”, 3/4”, 7/8” NO DRILL 25
11/16”, 3/4”, 7/8” NO DRILL 25
n 06658 GP,JR,RB
SC Series 2 Dr. Coupe
30
30
14, 17mm, 11/16” NO DRILL 30
11/16”, 3/4”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
l 51083 Ø,GP,JR,RT 18mm, 3/4” NO DRILL 5 5
3.5 5
40 n 51079 AL,GP,JR 10, 15mm, 1/2”
3/4”, 7/8”
1/2”
40
1/8”, 3/16”, 40
7/16”, 9/16”
1/8”, 3/16”, 40
7/16”, 9/16”
25
40
l 44569 Ø,GP,JR
n 33094 AL,JR
n 44574 AL,JR
18mm, 3/4”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
NO DRILL 5 5
1/2”
3.5 5
25
40
3.5 5
40
1/2”
–
–
–
–
–
–
–
–
–
ABBREVIATIONS
AE Requires temporary removal of muffler during installation.
JT 2WD models only.
201
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - SATURN
PONTIAC
PONTIAC - SATURN
MODEL
200
REESE TOWPOWER
07-08
07-08
2009
2009
91-02
SW Series Wagon
91-01 n 77014
Vue All, Except Redline
02-07
Vue All, Inc. Redline
SCION
tC
tC
tC
xB
xB
xB
xD
STERLING
Pickup, Bullet
Pickup, Bullet
n 77206 Ø,HM,JR
n 77206 Ø,HM,JR
n 77206 HM,JR
n 77206 HM,JR
n 77014 HM,JR,
KH,TA
HM,JR,
KH,TA
deep socket
13mm, 11/16”
deep socket
n 06391 Ø,HM
18, 19mm, 3/4”
n 44637 Ø,HM
n 51185 Ø,HM
18, 19mm, 3/4”
NO DRILL 25
n 44630 Ø,†,HM
n 06528
18mm
NO DRILL 15
n 44580
FOOTNOTES
STANDARD WIRE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
T-CONNECTOR
–
78013
–
–
–
–
–
CH
–
85702
–
74691
78100
78010
–
78013
78104
78104
78013
78104
–
78013
–
–
–
–
–
–
–
78064
78064
–
78064
78104
78104
78104
78104
CH
78092 78104
78104
–
CH
NO DRILL 30
–
78104
–
1/2”, 3/8” 35
1/2”, 3/8” 45
78098 78104
–
78104
CH
–
–
78104
78104
–
3/8”
17mm, 11/16”
3/8”
n 77187 Ø,GP
n 28501 Ø,AG,JR
17, 19mm
NO DRILL
10, 14, 17mm
NO DRILL
n 77187 Ø,GP
n 77187 Ø,GP
17, 19mm
NO DRILL
17, 19mm
NO DRILL
n 77200 Ø,GP,JR
12mm, 13mm,
9/16”, 11/16”,
3/4”
NO DRILL
NO DRILL 3.5 4
30
Ø,GP
18, 19mm,
3/4”
18, 19mm,
3/4”
18mm
NO DRILL 3.5 4
30
NO DRILL 3.5 4
30
NO DRILL 4
15
4
30
30
15
25
15
15
20
n 41936 @
3/4”
n 41940 @
21mm, 13/16”, 9/16”
7/8”
3/4”
17/32”
15 16
21mm, 13/16”, 9/16”
7/8”
15 16
n 41936 @
08-09
06-10
2011
03-06 n 77051
98-08
Forester
Impreza All, Inc. Outback Sport
09-12 n 77178
93-01 n 77091
HM,JR
10mm, 3/4”
Ø,JR
Impreza
Inc. Outback Sport & WRX, Except WRX STi
Impreza 4 Dr. Sedan, Inc. WRX
Impreza 5 Dr. Wagon, Inc. Outback Sport &
WRX, Except WRX STi
Legacy Coupe & Sedan, Inc. Outback & SUS
Legacy Sedan, Except Outback
02-07 n 77091
Ø,JR
14, 16, 17mm,
5/8”, 11/16”
14, 16, 17mm,
5/8”, 11/16”
08-11 n 77178
08-12 n 77222
HM,JR
10mm, 3/4”
HM,JR
3/4”
90-99
00-04
n 06020 KH
n 06287 Ø
Legacy Sedan, Except Outback
05-07
n 06377 Ø,JR
n 51177 Ø,JR
n 44535 Ø,GP,JR
n 44665 Ø,GP
11/16”, 3/4” NO DRILL 3.5 4 35
11/16”, 7/8” NO DRILL 3.5 5.25 30
NO DRILL 20
n 06975 Ø,GP,JR
n 51174 Ø,GP,JR
12mm, 14, 17mm NO DRILL 30
12mm, 14, 17mm NO DRILL 30
n 44607 HM,JR
1/2”, 3/8” 35
NO DRILL 30
1/2"
12mm, 11/16”,
3/4”, 7/8”
14, 17mm, 3/4”
NO DRILL 20
14, 17mm, 3/4”
n 06377 Ø,JR
n 51177 Ø,JR
14, 17mm, 3/4”
14, 17mm, 3/4”
12
CG
CH
CH
–
CH
–
CH
–
–
–
14, 17mm, 3/4” NO DRILL 4
25
–
78104
–
NO DRILL 25
NO DRILL 25
n 44581 Ø,JR
14, 17mm, 3/4” NO DRILL 4
25
–
78104
–
n 44631 JR,KH
10mm, 11/16” NO DRILL 4
45
85734 78104
CH
–
–
78064
–
78104
78104
78104
78104
–
78064 78104
CH
–
–
10mm, 11/16”
Legacy Wagon All, Inc. Outback
Legacy Wagon All, Except Outback
Legacy Wagon Outback
90-95
96-99
96-99
00-04
n 06020 KH
n 06020 KH
12mm, 3/4”, 7/8” 1/2"
n 06020 KH
n 06287 Ø
25
25
12mm, 3/4”, 7/8” 1/2"
25
12mm, 11/16”, NO DRILL 20
05-07
n 06377 Ø,JR
n 51177 Ø,JR
14, 17mm, 3/4”
1-1/8
Hole Saw
12mm, 3/4”, 7/8” 1/2"
12mm, 11/16”,
3/4”, 7/8”
35
12
CG
n 44581 Ø,JR
n 06669 JR,KH
n 06287 Ø
NO DRILL 3.5
17/32”
CG
NO DRILL 25
NO DRILL 25
10-12
3/4”, 7/8”
14, 17mm, 3/4”
10mm, 3/4”
25
3/4",7/8",12mm
Legacy Sedan
00-04
–
74720 78104
Ø,GP
SUBARU
B9 Tribeca All Models
B9 Tribeca All Models
Baja
Forester All, Inc. XT
Outback Sedan, Except Sport
78104
78104
78104
78104
78013
BN,CG
17mm, 11/16”
3/4” (2)
–
–
–
–
–
74695 78013
18, 19mm,
3/4”
08-09
08-09
DRILL BITS
7/16”, 9/16”
1/8”, 3/16”, 40
7/16”, 9/16”
n 41940 @
Legacy Sedan
WRENCHES
FOOTNOTES
HITCH
NUMBER
35
35
11/16”, 3/8”, 1/2” 7/16”
40
11/16”, 3/8”, 1/2” 7/16”
40
13mm, 11/16” 1/8”, 3/16”, 40
11/16”, 3/8”, 1/2” 7/16”
n 77199 GP
n 77199 GP
Ø
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
CLASS V
500-750 lb TW 5000-7000 lb GTW
11/16”, 3/8”, 1/2” 7/16”
08-09
05-06
07-10
11-12
04-07
08-10
11-12
08-10
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Sky
Sky Redline
Sky
Sky Redline
SL Series 4 Dr. Sedan
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
45 n 51204
NO DRILL 25
NO DRILL 25
NO DRILL 20
HM,JR,KH
10mm,
11/16”
1-1/8
4
Hole Saw
– 45
n 44581 Ø,JR
14, 17mm, 3/4” NO DRILL 4
25
–
–
CH
–
ABBREVIATIONS
AE Requires temporary removal of muffler during installation.
JT 2WD models only.
203
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - SUBARU
SATURN
SATURN - SUBARU
MODEL
202
REESE TOWPOWER
05-07
n 06377 Ø,JR
n 51177 Ø,JR
14, 17mm, 3/4”
12mm, 11/16”,
3/4”, 7/8”
14, 17mm, 3/4”
Outback Wagon All, Except Sport
00-04
n 06287 Ø
05-07
n 06377 Ø,JR
n 51177 Ø,JR
08-09
10-12
SUZUKI
Equator
09-11
99-05
06-11
89-95
96-98
n 77023 Ø,HM
n 77140 Ø,EP
19mm
n 77015 Ø,HM
n 77015 Ø,HM
4,18,19mm
04-09 – 77097
07-10 n 77189
SX4 Sport Sedan
Vitara
X-90
XL-7
19mm
14, 17mm, 3/4”
n 06669 JR,KH
10mm, 11/16”
NO DRILL 15 n 88001
NO DRILL 20
4,18,19mm
–
3/4”, 7/8”
1/2”
HM,JR
11/16”, 3/4”
08-09 n 77190
HM,JR
11/16”, 3/4”
99-05 n 77023
96-98 n 77015
01-06 n 77023
Ø,HM
19mm
Ø,HM,HP
4,18,19mm
1” Hole
40
Cut Saw
1” Hole
40
Cut Saw
NO DRILL 15 n 88001
NO DRILL 20
Ø,HM
19mm
NO DRILL 15
TOYOTA
4Runner
4Runner
4Runner
4Runner
92-95
96-00
01-02
03-06
4Runner
07-09
Avalon
95-99
Avalon
Avalon
Avalon
Camry 4 Dr. Sedan
Camry 2 & 4 Dr.
Camry 4 Dr.
Camry 4 Dr.
Camry 4 Dr.
Camry 4 Dr., Except Hybrid
Camry 4 Dr., Hybrid
Camry 4 Dr., Hybrid
00-04
05-10
2011
87-91
92-96
10,13,14mm
– 77102
n 77004
EP
See Instructions
Ø,HM,JR
14, 17mm
02-04 n 77035
07-09
07-09
10-11
10-11
Ø,HM,JR
Ø,HM,JR
10,13,14mm
17mm
17mm
25
FOOTNOTES
STANDARD WIRE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
T-CONNECTOR
–
78104
–
78064 78104
CH
NO DRILL 25
NO DRILL 25
n 44581 Ø,JR
14, 17mm, 3/4” NO DRILL 4
25
78064 78104
CH
NO DRILL 25
NO DRILL 25
n 44581 Ø,JR
14, 17mm, 3/4” NO DRILL 4
25
78064 78104
CH
45
78092 78104
CH
1-1/8
Hole Saw
45 n 51204
See Instructions
10mm,
11/16”
1-1/8
4
Hole Saw
– 45
n 44631 JR,KH
10mm, 11/16” NO DRILL 4
n 51147 Ø,GP
19mm
NO DRILL 5
8 30
n 44526 Ø,GP
19mm
NO DRILL 5
8
30
85757 78058
85763 78058
BN, ,
BN,N,RZ,
Fact Tow Package
models only
n 51152 Ø,HM
14, 18mm
NO DRILL 3.5
15
n 33038 Ø,HM
n 44543 Ø,EP
14, 18mm
NO DRILL 3.5
NO DRILL 3.5 4
15
20
74896
78018
–
–
78013
78013
78013
78013
HG
–
78013
78018 78013
–
78101 78013
CG
HG
15
74896 78013
–
78013
74896 78013
4
30
74709 78104
Factory Tow
Package
models only
40
30
30
35
–
74663
74663
–
78104
78104
78104
78013
–
NO DRILL 6
5
5.5
5.5
7.3
NO DRILL 6
7.3 35
–
78013
–
–
78013
–
–
–
78109
–
–
78013
78013
78013
78104
78104
–
74205 78013
HG
85318 78013
HG
85318 78013
HG
85701 78104
CH
78109 78013
CH
78109 78013
CH
78109 78013
CH
HM,JR,KH
19mm
n 51152 Ø,HM
14, 18mm
NO DRILL 3.5
n 51152 Ø,HM
14, 18mm
NO DRILL 3.5
15
n 33038 Ø,HM
14, 18mm
NO DRILL 3.5
15
n 33038 Ø,HM
14, 18mm
NO DRILL 3.5
n 44570 Ø,HM
18mm
NO DRILL 4
n 33023 †
l 33013 Ø
18mm, 3/4”
NO DRILL 5
NO DRILL 5
15
CG
HG
HG
CG
–
HG
See Instructions
See Instructions
See Instructions
n 06326 HM
n 51178 HM
14, 17mm, 11/16” 1/2”
30
30
n 06025 –
14mm,17mm,11/16” 1/2”
14, 17mm, 11/16” 1/2”
15
15
20
NO DRILL 40
NO DRILL 40
40
NO DRILL 30 n 06326
n 51178
NO DRILL 15 n 06326
n 51178
NO DRILL 15 n 06326
n 51178
n 06326
n 51178
n 06397
n 51190
n 06397
n 51190
n 06397
n 51190
n 06397
n 51190
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
14, 17mm, 3/4” NO DRILL 4
NO DRILL 20
l 33013 Ø
l 44548 Ø,FE,LT,SI
l 44548 Ø,FE,LT,SI
n 77253 Ø,HM,JR
n 77253 Ø,HM,JR
WIRING
1250 lb TW 12000 lb GTW
30
n 06098 –
n 06098 –
97-01 n 77035
05-06
14, 17mm, 3/4”
n 44581 Ø,JR
NO DRILL 25
NO DRILL 25
See Instructions
n 88001
07-09
14, 17mm, 3/4”
n 06377 Ø,JR
n 51177 Ø,JR
NO DRILL 20
NO DRILL 20
XL-7
14, 17mm, 3/4”
CLASS V
500-750 lb TW 5000-7000 lb GTW
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
15
15
15
15
15
15
15
15
45
45
45
45
45
45
45
45
5
18mm, 3/4”
10, 12, 13,
17mm, 3/4”,
1/2”
10, 12, 13,
17mm, 3/4”,
1/2”
HG
HG
–
–
CH
–
–
ABBREVIATIONS
AW Will not fit turbo models.
JT 2WD models only.
205
APPLICATIONS GUIDE
Grand Vitara
Grand Vitara
Sidekick 2 & 4 Dr.
Sidekick 2 & 4 Dr., Inc. JS 2WD, JX 4WD
(Will Not Fit Sport Model)
Swift+ 5 Dr. (Canada Only)
SX4 Crossover
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Outback Sedan, Except Sport
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL - TOYOTA
SUBARU
SUBARU - TOYOTA
MODEL
204
REESE TOWPOWER
REESE TOWPOWER
Camry Wagon, All Styles
Celica All Models
Corolla 2 & 4 Dr. Sedan
Corolla 2 & 4 Dr. Sedan
87-91 l 77102
00-05 n 77085
86-92
93-02 n 77005
EP
See Instructions
Ø
14, 17mm
NO DRILL 15
Corolla
2003 n 77186
n 51171
04-07 n 77186
n 51171
2008 n 77186
n 51171
09-11 n 77186
n 51171
88-92
88-93
86-92
00-02 n 77086
00-02
03-05
04-05 n 77127
Ø,HM
10, 17, 18mm,
11/16”
17, 19mm
1” hole
30
saw
NO DRILL 20
Ø,HM
17, 19mm
Ø,HM
17, 19mm
NO DRILL 20
NO DRILL 20
Ø,HM
17, 19mm
Ø,HM
17, 19mm
NO DRILL 20
NO DRILL 20
Ø,HM
17, 19mm
Ø,HM
17, 19mm
NO DRILL 20
NO DRILL 20
Ø,HM
17, 19mm
NO DRILL 20
Corolla
Corolla
Corolla
Corolla Wagon 2 WD
Corolla Wagon 4 WD
Cressida Sedan
Echo
Echo All, Except Hatchback
Echo All, Except Hatchback
Echo
Hatchback 2 & 4 Dr., Except Turbo (Canada Only)
FJ Cruiser
Highlander
KH,SV
Ø
Ø,AD
17mm
14, 17mm
10, 12, 14, 17mm 1/2”, 1”
n 51087 Ø,GP
l 51153 Ø,HM
l 51155 Ø,RT
14, 17mm
19mm, 3/4”
NO DRILL 5
l 44076 Ø
l 33075 Ø
14, 17mm
NO DRILL 3.5
NO DRILL 3.5
l 44670 Ø,HM,SV
10, 12, 14,
17mm
NO DRILL 5
5
n 44587 Ø,HM
10, 14, 17mm NO DRILL 5
5
25
2012
l 44670 Ø,HM,SV
10, 12, 14,
17mm
08-12
91-95
96-97
98-99
n 33066 Ø
n 33066 Ø
See Instructions
Sequoia
Sequoia
n 51158 Ø,HM
08-12
14, 17mm
NO DRILL 3.5
NO DRILL 3.5
10, 14, 17mm NO DRILL 5
15
20
5 25
14, 17mm
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
–
78013
78013
78013
–
78024 78013
CG
–
78013
–
–
78013
–
78020 78104
CH
–
–
–
78023
78023
–
–
78013
78013
78013
78013
78013
78013
78013
–
85701 78013
74690 78013
CH
78062 78013
CH
78067 78104
CH
TW
78067 78104
CH
78013
78013
78013
78013
BN,HG
TW
85718
–
74208
74225
–
85248
–
78023
78013
78013
–
78013
–
78023 78013
78023 78013
78010 78104
CG
–
–
85250
–
85725
85725
78025
78026
78048
85249
78013
78104
78104
78013
78013
78013
78013
78013
78104
78013
–
–
–
–
–
–
CG
CG
–
–
BN,HG
0
lb
WRENCHES
FOOTNOTES
–
–
–
–
15
75
MR2
Pickup All, Except T-100
Pickup All, Except T-100
Previa All, Inc. Supercharged
Prius
Prius
RAV4
RAV4
RAV4
Sequoia
See Instructions
6 30
n 44545 Ø,GP
15
20
40
2000
01-02
03-07
03-08 n 77183
n 51169
03-08
03-08
09-11 n 77183
n 51169
86-90
84-88
89-95
91-97
04-09 n 77179
10-11 n 77236
96-00 n 77107
01-05 n 77107
06-11
01-02
CH
NO DRILL 15
30
LandCruiser
LandCruiser
LandCruiser
Matrix All Models
85701 78104
NO DRILL 15
6
04-07
08-11
HITCH
NUMBER
40
40
n 06276 Ø
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
HITCH
NUMBER
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
n 06139 HM,JR,
07-12
01-03
Highlander All, Inc. Hybrid
Highlander
All, Inc. Hybrid & models w/ Full Size 19” Spare
Highlander
All, Inc. Hybrid, except for w/ 19” spare
Highlander
All, Inc. Hybrid & models w/ Full Size 19” Spare
Hilux
LandCruiser
LandCruiser
LandCruiser
NO DRILL 5
5
40
5
See Instructions
5
30
30
20
n 44546 Ø
n 44546 Ø
7/8”
12, 19mm, 7/8” NO DRILL 5
12, 19mm, 7/8” NO DRILL 5
6
6
6
n 44546 Ø
12, 19mm, 7/8” NO DRILL 5
6
6
6
20
20
20
75
n 44546 Ø
Ø,HM,UD
19mm
Ø,HM,UD
19mm
Ø,HM
19mm
Ø,HM
19mm
NO DRILL 15
NO DRILL 15
NO DRILL 15
NO DRILL 15
n 51015 Ø,AA
n 51015 Ø,AA
n 06229 Ø,GP,JR
Ø,HM,SC
10, 14, 17mm
Ø,HM,JR
17, 19mm
Ø
17, 19mm
Ø
17, 19mm
See Instructions
See Instructions
See Instructions
3.5 4 20
3.5 4 20
n 33024 Ø,AA
n 33024 Ø,AA
5
5
See Instructions
See Instructions
5
5
60
60
30
NO DRILL 30
NO DRILL 25
n 33060 Ø,RA
n 33060 Ø
NO DRILL 15
NO DRILL 15
CH
BN,HG
BN,HG
–
–
CG
CG
CH
–
BN,HG
–
CH
CH
n 44540 Ø
n 44089 Ø
20
17, 19mm
20
17, 19mm
NO DRILL 3.5 4 20
18mm, 7/8”, NO DRILL 5 6.5 25
03-07
n 44089 Ø
NO DRILL 5
6.5 25
–
78113
–
08-10
n 44602 Ø,AI
6
10 40
–
78113
–
n 06668 Ø,HM
17, 19mm
NO DRILL 20 n 51157 Ø,RT
17mm,19mm NO DRILL 3.5 4
20
17, 19mm
3/4”
18mm, 7/8”,
3/4”
3/4”
NO DRILL 3.5
NO DRILL 3.5
lb
0
Matrix w/Ground Effects
Matrix w/o Ground Effects
Matrix All Models
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
2012
CLASS V
1/2”
CG
CG
CH
w/ Factory
Tow Package
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
CLASS III/IV
CLASS III
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
207
MODEL
TOYOTA
TOYOTA
MODEL
206
REESE TOWPOWER
REESE TOWPOWER
98-00
n 06077 Ø
See Instructions
15
n 33008 –
Sienna Van
01-03
n 06077 Ø
See Instructions
15
n 33008 –
Sienna Van All Models
Sienna Van All Models
04-10
11-12
l 06137 Ø,HM,SV
10mm, 19mm, 6” NO DRILL 20 l 51080 Ø,RT,JR
Ratchet Extension
l 51196 Ø,HM,SV
Solara
99-03 n 77035
04-06
07-09
93-98
Tacoma Pickup
ll, 2 & 4 WD (App. starts with 95-1/2)
95-04
17mm
NO DRILL 15 n 06326
n 51178 HM
HM
n 06387 Ø,JR
n 06387 Ø,JR
19mm
NO DRILL 3.5 5
NO DRILL 3.5 5
30
30
l 33070 Ø,JR,TS
l 33070 Ø,JR,TS
10 19mm
NO DRILL 3.5 5
45
l 44648 Ø,HM,SV
19mm
Tundra
Tundra
models without Factory installed Receiver
Tundra
models without Factory”stalled Receiver
Venza All Styles
Yaris Sedan
Yaris Liftback
14, 17mm
14, 17mm
n 33022 Ø,†,CN
n 51108 Ø,GP
n 51146 Ø,GP
n 51146 Ø,GP
n 51047 Ø,GP
n 51047 Ø,GP
01-02
n 51047 Ø,GP
03-06
FOOTNOTES
STANDARD WIRE
3.5 5
30
–
78013
–
NO DRILL 3.5 5
NO DRILL 3.5 5
30
30
78004 78013
85720 78104
–
NO DRILL 3.5 5
45
–
78013
–
–
45
–
78013
–
–
85718 78013
See Instructions
5 5.5 40
n 33025 Ø
5.5 30
85250 78013
BN,HG
10, 17, 19mm NO DRILL 5
10, 17, 19mm NO DRILL 5
5.5 30
5.5 30
7.5 15
7.5 15
7.5 15
n 33090 Ø,GP
n 33090 Ø,GP
85718
85718
74682
–
–
74887
78013
78013
78058
78013
78013
78104
BN,HG
85247 78104
BN,GC
–
–
78104
–
–
78058
–
18mm, 9/16”, NO DRILL 5
7/32” Allen
9/16”, 3/4”,
#45 Torx
See Instruc5
tions
10, 17, 19mm NO DRILL 5
10, 17, 19mm NO DRILL 5
n 33049 Ø
l 37034 –
18mm, 3/4”
l 37069 –
l 37094 Ø
9/16”, 3/4”
n 44054 Ø
n 33049 Ø
18mm, 7/8”
NO DRILL
18mm, 3/4”
NO DRILL
l 37034 –
l 37069 –
15/16”, 3/4” 5/8”
l 37094 Ø
n 44054 Ø
15/16”, 3/4” 5/8”
18mm, 7/8”
NO DRILL
n 33049 Ø
l 37034 Ø
18mm, 3/4”
NO DRILL
l 37069 –
l 37094 Ø
9/16”, 3/4”
NO DRILL 5
15/16”, 3/4” 5/8”
7
CH
BN,HG
Factory 7-Way
models only
–
–
7.5
12
7.5
8
35
30
20
20 n 41935
Ø,@,CP,HM
17, 19, 21mm NO DRILL 12
14
–
8
20 n 41935
Ø,@,CP,HM
17, 19, 21mm NO DRILL 12
14
74682 78058
78071 78104
Factory 7-Way
models only
5th-Wheel
Harness
78108 78104
85744 78104
–
78013
B
1/2”
15/16”, 3/4” 5/8”
1/2”
15/16”, 3/4” 5/8”
17, 19, 22mm, NO DRILL 6
3/4”, 7/8”
l 44604 Ø,HM,JR
17mm
5.5 30
5.5 30
5
7
17, 19, 22mm, NO DRILL 6
9/16”, 3/4”
n 44568 Ø,CP,HM
NO DRILL 20
5.5 40
5
7
5
5
7
5
7
5
5
7
1/2”
15/16”, 3/4” 5/8”
8 20
17mm
BN,HG
20
30
35
30
20
20
30
35
30
20
20
30
n 51091 Ø,RT,CP,HM 17, 19, 22mm, NO DRILL 6
3/4”, 7/8”
NO DRILL 20
NO DRILL 20
7
–
7.5
12
7.5
12
7.5
7.5
12
7.5
12
7.5
7.5
12
10-12
12mm, 13mm
T-CONNECTOR
1/2”
n 44054 Ø
n 44568 Ø,CP,HM
Ø,GP
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
–
8 20
l 06138 Ø
DRILL BITS
78013
n 51091 Ø,RT,CP,HM 17, 19, 22mm, NO DRILL 6
3/4”, 7/8”
12mm, 13mm
WRENCHES
–
07-09
Ø,GP
FOOTNOTES
30
15
15
NO DRILL 15
NO DRILL 15
83-90
91-98
2000
09-11
07-11 n 77191
07-11 n 77191
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
10, 19mm,
6 ratchet
3.5 5
14, 17mm, 11/16” 1/2”
Tacoma Pickup All, Except X-Runner 05-08
Tacoma Pickup All, Except X-Runner 09-12
Tundra
19mm
1/2”
14, 17mm, 11/16” 1/2”
n 44051 Ø
Tercel 2 & 4 Dr. Sedan
Tercel 2 & 4 Dr. Sedan
Tundra
14, 17mm,
7/8”
14, 17mm,
7/8”
19mm
WIRING
1250 lb TW 12000 lb GTW
3/4”, 7/8”
NO DRILL 3.5 4
20
BN,GC
Factory 7-Way
models only
–
–
ABBREVIATIONS
AWWill not fit turbo models. A
Y Does fit SE models with Sport Appearance Package, GT model or 4 Dr. STE.
JT 2WD models only.
APPLICATIONS GUIDE
Solara
Solara
T-100 Pickup All Models
Ø,HM,JR
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
Sienna Van
l 51080 Ø,RT,JR
CLASS V
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
CLASS III/IV
CLASS III
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
209
MODEL
TOYOTA
TOYOTA
MODEL
208
REESE TOWPOWER
98-01
02-10
2012
2012
09-12
– 77026
– 77026
n 77264
n 77266
n 77221
TA
13mm, 7/8”
1/2”
TA
13mm, 7/8”
1/2”
City Golf Canada Only
City Jetta Sedan (Canada Only)
Eos All Models
Golf
Golf Except GTI V6
Golf All, Inc. TDI
Golf GTI 2 Dr. Hatchback (Canada Only)
Golf GTI 4 Dr. Hatchback (Canada Only)
Golf Wagon Canada Only
07-10
07-09
07-11
85-06
99-06
10-11
2010
2010
10-11
– 77026
n 77106
n 77196
– 77026
– 77026
n 77197
n 77235
n 77235
n 77249
GTI 2 Dr. Hatchback
GTI 2 Dr. Hatchback
GTI 4 Dr. Hatchback
GTI 4 Dr. Hatchback
GTI 2 Dr. Hatchback
Jetta Jetta III Inc. GT
Jetta Sedan Except Gas Turbo & Wagon Models
Jetta Sedan, Except Wagon Models
(App. starts w/ 99-1/2)
Jetta Sedan, Except Gas Turbo & Wagon
Models (Old Body Style)
Jetta
Sedan, Except Wagon Models (Old Body Style)
Jetta
4 Dr. Sedan (New Body Style)
Jetta
4 Dr. Sedan (New Body Style)
Jetta SportWagen
2006
07-09
07-09
2010
10-12
94-98
99-04
99-04
n 77197 Ø,HM
n 77197 Ø,HM
Passat
All, Except 4 Motion & W8 Engine Models
Passat Sedan, All, Except 4 Motion
Ø,HM,JR
GP,JR
HM,JR,X
FOOTNOTES
T-CONNECTOR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STANDARD WIRE
WIRING
1250 lb TW 12000 lb GTW
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
FOOTNOTES
500-750 lb TW 5000-7000 lb GTW
DRILL BITS
WRENCHES
FOOTNOTES
CLASS V
30
30
12mm, 11/16” NO DRILL 20
13mm, 3/4”
11/16” 30
T-20, T-25, 13mm, 1/2”
35
–
–
–
–
–
78104
78104
–
–
–
–
30
30
40
30
30
15
40
40
40
–
–
–
–
–
78013
78013
78113
78013
78013
–
NO DRILL 15
NO DRILL 15
–
–
–
–
–
–
–
–
78104
78113
78113
78113
78113
78013
78013
78013
–
TA
11/16”
13mm, 7/8”
1/2”
TA
3/4”, 7/8”
1/2”
Ø,GP,JR
13mm, 3/4”
NO DRILL
TA
13mm, 7/8”
1/2”
TA
13mm, 7/8”
1/2”
Ø,HM
13, 19mm, 3/4”
NO DRILL
Ø,JR,KH
13, 18mm, 3/4”
NO DRILL
Ø,JR,KH
13, 18mm, 3/4”
NO DRILL
Ø,JR,TA
T-25, 10, 13mm,
11/16”, 3/4”
13, 19mm, 3/4”
NO DRILL
13, 19mm, 3/4”
n 77197 Ø,HM
n 77235 Ø,JR,KH
13, 19mm, 3/4”
n 77235 Ø,JR,KH
n 77065 –
13, 18mm, 3/4”
3/4”, 7/8”
NO DRILL 40
1/2”
30
n 77106 TA
n 77106 TA
3/4”, 7/8”
1/2”
3/4”, 7/8”
1/2”
30
30
13, 18mm, 3/4”
NO DRILL 15
NO DRILL 40
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2005 n 77106
TA
3/4”, 7/8”
1/2”
30
–
78013
–
2005 n 77106
TA
3/4”, 7/8”
1/2”
30
–
78013
–
05-10 n 77249
Ø,HM,JR,TA T-25, 10, 13mm,
NO DRILL 40
85782 78104
CH
11-12 n 77249
Ø,HM,JR,TA T-25, 10, 13mm,
NO DRILL 40
–
–
–
09-12 n 77249
Ø,JR,TA
NO DRILL 40
–
–
–
99-05 n 77039
RB,TA
T-25, 10, 13mm,
11/16”, 3/4”
T-25, T-27,
10mm, 3/4”
1/2”
40
–
78013
–
06-12 n 77221
HM,JR,X
1/2”
35
–
78113
–
1/2”
35
1/2”
35
85781 78113
CH
1/2”
35
Ø,HM
T-20, T-25, 13mm,
11/16”
T-20, 13mm,
11/16”
T-20, T-25, 13mm,
11/16”
T-20, 13mm,
11/16”
13, 19mm, 3/4”
13, 19mm, 3/4”
78104
78113
–
Ø,HM
–
11/16”, 3/4”
11/16”, 3/4”
n 77155 †,HM,JR,X
Passat Wagon All, Except 4 Motion
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
VOLKSWAGEN
Beetle
Beetle All, except Turbo S
Beetle All, except Turbo
Beetle Turbo Only
CC All, Except 4 Motion
HITCH
NUMBER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
07-10 n 77221
HM,JR,X
n 77155 †,HM,JR,X
Rabbit All Models
Rabbit All Models
Routan
2006 n 77197
07-09 n 77197
09-11
Tiguan
Touareg
09-12
04-10
NO DRILL 15
NO DRILL 15
n 06550 Ø,GP,JR
n 51192 Ø,GP,JR
13,15,18mm
13,15,18mm
NO DRILL 20
NO DRILL 20
n 06625 Ø,EP
17mm
NO DRILL 20
51203
n 44586 Ø,GP,JR
13,15,18mm NO DRILL 4
– 44611
n 44530
Ø,EP
17mm
AA,RB
18mm,
1/2”
T-25,T-27,7/8”
5
20
–
–
–
6
20
90
–
78104
85733 78113
NO DRILL 3.5
6
–
CH
ABBREVIATIONS
CE T-connector includes fuse(s) & relays(s), converter not required. Standard 2 wire system at factory tow plug.
JT 2WD models only.
RB Hitch installation can be made easier with a "cutter" type drill bit.
X= Minor fascia trimming required.
211
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODEL
VOLKSWAGEN
VOLKSWAGEN
MODEL
210
REESE TOWPOWER
REESE TOWPOWER
14, 17mm, 22mm NO DRILL 60
n 06426 FE
n 06223 Ø,FE,JR
8, 17, 19mm
NO DRILL 40
n 06223 Ø,FE,JR
n 06223 Ø,FE,JR
8, 17, 19mm
n 06024 GP,JR
850 Series Wagon
94-97
n 06024 GP,JR
940 Series All Styles
960 Series
C30
91-95
92-94
95-97
08-10 n 77182
n 06223 Ø,FE,JR
n 06223 Ø,FE,JR
12, 14mm,
3/4”, 7/8”
12, 14mm,
3/4”, 7/8”
8, 17, 19mm
C70 Coupe
98-02
n 06024 GP,JR
C70 Convertible
98-04
n 06024 GP,JR
S40 Sedan Old Body Style
S40 Sedan New Body Style
(App. starts with 2004-1/2)
S60 Sedan
00-04 n 77084
04-10 n 77156
n –
HM,JR,KH
3/4”
8, 17, 19mm
1/2”
M10, M12,
M13, 3/4”
NO DRILL 25
01-09
12, 14mm,
3/4”, 7/8”
12, 14mm,
3/4”, 7/8”
n 06420 Ø,HM,JR
n 51172 Ø,HM,JR
17mm
12, 14mm,
3/4”, 7/8
8, 17, 19mm
17mm
n 06024 GP,JR
S80 Sedan
S80 Sedan
V40 Wagon
V50 Wagon
99-06
07-11
00-04 n 77084
05-10 n 77156
n 06394 Ø,X
n 06608 Ø,HM,JR,KH 13mm, 11/16”
V70 Wagon All, Inc. AWD & XC
98-00
n 06024 GP,JR
V70 Wagon All, Inc. AWD & XC
01-02
n 06420 Ø,HM,JR
n 51172 Ø,HM,JR
V70 Wagon All, Inc. AWD
03-07
n 06420 Ø,HM,JR
n 51172 Ø,HM,JR
17mm
17mm
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
NO DRILL 40
NO DRILL 40
–
–
–
–
78104
78104
–
78113
–
78013
78013
78013
78104
78104
78104
78104
–
–
–
–
–
–
–
–
–
–
1/2”
20
–
78113
–
1/2”
20
–
78113
–
–
–
–
–
–
NO DRILL 15
NO DRILL 15
–
78104
–
20
–
78104
–
–
78012
–
–
78104
78113
78104
78104
–
20
–
78113
–
NO DRILL 15
NO DRILL 15
–
–
–
78113
78113
78113
–
70
78005 78113
CH
4.5 45
85749 78113
CH
–
78113
–
70
–
78113
–
25
25
–
78113
78047 78113
–
1/2"
NO DRILL 40
NO DRILL 35
1/2”
NO DRILL 15
NO DRILL 15
n 44597 Ø,DU,
XC60
10-12
n 44629 Ø,GP,JR,
XC70 Wagon AWD
03-07
EP,GP,N
KH,SR
17mm
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
–
08-10
17mm
DRILL BITS
78104
V70 Wagon All, Inc. AWD
n 06420 Ø,HM,JR
n 51172 Ø,HM,JR
WRENCHES
–
20
NO DRILL 25
17mm
FOOTNOTES
20
1/2”
12, 14mm,
3/4”, 7/8”
17mm
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
1/2”
40
98-00
M10, M12,
M13, 3/4”
20
NO DRILL 40
NO DRILL 40
Ø,JR
S70 Sedan Inc. AWD
Ø,GP,JR
1/2”
–
–
–
–
–
–
–
20
3/4”, 7/8”
Ø,GP,JR
3/4”, 7/8”
1250 lb TW 12000 lb GTW
3/8”, 1” 45
Hole Saw
TA
TA
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
n 06426 FE
n 06426 FE
WIRING
8, 10, 13,
NO DRILL 4
17mm,
T-20 Torx
13mm, 11/16” NO DRILL 4
NO DRILL 15
NO DRILL 15
XC70 Wagon AWD
08-11
n 44597 Ø,DU,
XC90
XC90
03-04
05-12
n 33073 Ø,JR
n 33073 Ø,JR
EP,GP,N
8, 10, 13,
17mm,
T-20 Torx
17, 18mm
17, 18mm
NO DRILL 4
NO DRILL 5
NO DRILL 5
5
5
–
CH
–
–
–
–
CH
ABBREVIATIONS
JT 2WD models only.
APPLICATIONS GUIDE
74-82
74-82
74-93
84-92
84-90
88-90
93-97
CLASS V
500-750 lb TW 5000-7000 lb GTW
VOLVO
140 Series
160 Series
240 Series
780 Series 2 Dr. Coupe
850 Series Sedan, Inc. T5
8, 17, 19mm
CLASS III/IV
CLASS III
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
213
MODEL
VOLVO
MODEL
VOLVO
212
REESE TOWPOWER
FRONT MOUNT RECEIVERS
YEAR
HITCH
NUMBER
WRENCHES
SAFETY
GLASSES
DRILL BITS
FOOTNOTES
VERT LOAD
LINE PULL
INSTALL TIME
YEAR
HITCH
NUMBER
WRENCHES
SAFETY
GLASSES
DRILL BITS
FOOTNOTES
VERT LOAD
LINE PULL
INSTALL TIME
Blazer, Full Size
92 - 94
65005
10, 18mm, 7/8"
SAFETY
1/2"
JU,JV
500
9,000
40
FORD Continued
Blazer, Downsize, All Models
95 - 05
65004
15mm, 11/16"
SAFETY
7/16"
JW,JX,X
300
9,000
30
E-350 Econoline Van, Full Size, All Models
91 - 07
65001
7/8"
SAFETY
1/2"
–
500
9,000
20
Express Van, Full Size
96 - 02
65016
10, 15, 17mm, 3/4"
SAFETY
1/2"
X
500
9,000
35
E-350 Econoline Van, RV Cutaway
91 - 07
65001
7/8"
SAFETY
1/2"
–
500
9,000
20
Express Van, RV Cutaway Only
2003
65016
10, 15, 17mm, 3/4"
SAFETY
1/2"
X
500
9,000
35
08 - 12
65053
8, 21mm deep socket, 7/8"
SAFETY
3/8", 1/2"
AI,EP,GP,JV
500
9,000
50
Pickup, C Series, 2 Dr. Regular & Extended Cabs, 2WD
88 - 00
65021
10, 18mm, 7/8"
SAFETY
1/2"
JV,KD,KE
500
9,000
30
08 - 11
65053
SAFETY
3/8", 1/2"
AI,EP,GP,JV
500
9,000
50
Pickup, C Series, 4 Dr. Crew Cab, 2WD
92 - 00
65021
10, 18mm, 7/8"
SAFETY
1/2"
JV,KD,KE
500
9,000
30
91 - 07
65001
7/8"
SAFETY
1/2"
–
500
9,000
20
Pickup, C/K Series, 2 Dr. Regular & Extended Cabs
88 - 00
65005
10, 18mm, 7/8"
SAFETY
1/2"
JU,JV,KC
500
9,000
40
08 - 11
65053
SAFETY
3/8", 1/2"
AI,EP,GP,JV
500
9,000
50
Pickup, K Series, 4 Dr. Crew Cab, 4WD
92 - 00
65005
10, 18mm, 7/8"
SAFETY
1/2"
JU,JV,KC
500
9,000
40
Excursion
00 - 05
65022
15, 18mm, 3/4"
SAFETY
5/8"
AA,KI
500
9,000
40
Pickup, Silverado, 1500 LD 6.6 ft. Bed, 2 & 4 WD (Classic)
99 - 07
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
20
Expedition
97 - 02
65025
7, 8, 10, 15mm, 7/8"
–
–
–
500
9,000
20
Pickup, Silverado, 1500 LD 8 ft. Bed, 2 & 4 WD (Classic)
99 - 07
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
20
Explorer
91 - 94
65017
10, 15, 17mm, 3/4"
–
–
–
300
9,000
35
Pickup, Silverado, 2500 LD 6.6 ft. Bed, 2 & 4 WD
99 - 04
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
Explorer, 2 Dr. Sport
01 - 03
65030
8, 10, 15mm, 7/8"
–
–
–
300
9,000
25
Pickup, Silverado, 2500 LD 8 ft. Bed, 2 & 4 WD
99 - 04
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
Explorer, 4 Dr.
02 - 05
65032
19mm
SAFETY
1/2"
–
500
9,000
30
Pickup, Silverado, 1500 HD 6.6 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
Explorer Sport Trac
01 - 05
65030
8, 10, 15mm, 7/8"
–
–
–
300
9,000
25
Pickup, Silverado, 2500 HD 6.6 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
F-150, Flareside (New Body Style)
04 - 08
65043
7/8"
–
–
–
500
9,000
20
Pickup, Silverado, 2500 HD 8 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
F-150, Styleside (New Body Style)
04 - 08
65043
7/8"
–
–
–
500
9,000
20
Pickup, Silverado, 3500 Series 8 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
F-150, Flareside (New Body Style), 2 & 4 WD
09 - 11
65054
3/4", 7/8", 15/16"
–
–
EP,GP
500
9,000
30
Pickup, Silverado, 1500 LD 5.8 ft. Bed, 2 & 4 WD (Classic)
04 - 07
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
20
F-150, Harley-Davidson, 2 & 4 WD
09 - 11
65054
3/4", 7/8", 15/16"
–
–
EP,GP,HB
500
9,000
30
Pickup, Silverado, 1500 LD 5.8 ft. Bed, 2 & 4 WD (New Body Style)
07 - 12
65052
3/4", 7/8"
–
–
GP,X
500
9,000
25
F-150, Styleside (New Body Style), 2 & 4 WD
09 - 11
65054
3/4", 7/8", 15/16"
–
–
EP,GP
500
9,000
30
Pickup, Silverado, 1500 LD 6.6 ft. Bed, 2 & 4 WD (New Body Style)
07 - 12
65052
3/4", 7/8"
–
–
GP,X
500
9,000
25
F-150, SVT Raptor
10 - 11
65054
3/4", 7/8", 15/16"
–
–
EP,GP,KG
500
9,000
30
Pickup, Silverado, 1500 LD 8 ft. Bed, 2 & 4 WD (New Body Style)
07 - 12
65052
3/4", 7/8"
–
–
GP,X
500
9,000
25
F-150 Light Duty, Flareside
97 - 98
65025
7, 8, 10, 15mm, 7/8"
–
–
JW
500
9,000
20
Pickup, Silverado, 2500 HD 6.6 ft. Bed, 2 & 4 WD (New Body Style)
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
F-150 Light Duty, Styleside
97 - 98
65025
7, 8, 10, 15mm, 7/8"
–
–
JW
500
9,000
20
Pickup, Silverado, 2500 HD 8 ft. Bed, 2 & 4 WD (New Body Style)
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
F-150 Light Duty, Flareside
99 - 03
65025
7, 8, 10, 15mm, 7/8"
–
–
–
500
9,000
20
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
99 - 03
65025
7, 8, 10, 15mm, 7/8"
–
–
–
500
9,000
20
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
F-150 Light Duty Heritage, Flareside/Styleside (Old Body Style)
2004
65025
7, 8, 10, 15mm, 7/8"
–
–
–
500
9,000
20
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
F-150 SuperCrew
00 - 03
65025
7, 8, 10, 15mm, 7/8"
–
–
–
500
9,000
20
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
F-150 SuperCrew, New Body Style, w/5.5 & 6.5 ft. Beds
04 - 08
65043
7/8"
–
–
–
500
9,000
20
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
F-150 SuperCrew, New Body Style, w/5.5 & 6.5 ft. Beds, 2 & 4 WD
09 - 11
65054
3/4", 7/8", 15/16"
–
–
EP,GP
500
9,000
30
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
F-250, Styleside, All Models Inc. Super Cab
92 - 96
–
94 - 04
65004
15mm, 11/16"
SAFETY
7/16"
JW,JX,X
300
9,000
30
13mm, 7/8"
21mm, 13/16", 15/16"
–
S-10 Pickup
65014
65015
JT,KB
JW
500
500
9,000
9,000
25
25
Suburban, Old Body Style
92 - 99
65005
65021
10, 18mm, 7/8"
10, 18mm, 7/8"
SAFETY
SAFETY
1/2"
1/2"
JU,JV,KC
JV,KD
500
500
9,000
9,000
40
40
F-250 Heavy Duty
1997
65014
65015
13mm, 7/8"
21mm, 13/16", 15/16"
–
–
JT,KB
JW
500
500
9,000
9,000
25
25
Suburban, All 1500 Series, 2 & 4 WD
00 - 06
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
20
97 - 98
65025
7, 8, 10, 15mm, 7/8"
–
–
JW
500
9,000
20
20
1999
65025
7, 8, 10, 15mm, 7/8"
–
–
–
500
9,000
20
40
F-250 Super Duty
99 - 07
65022
15, 18mm, 3/4"
SAFETY
5/8"
AA,KI
500
9,000
40
20
F-250 Super Duty
2008
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
30
F-250 Super Duty, 2WD (App. starts with 2008-1/2)
08 - 10
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
DODGE
08 - 10
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
9,000
20
Dakota Pickup
00 - 04
65029
15, 18mm, 7/8"
–
–
JW
300
9,000
25
F-250 Super Duty, All Models
11 - 12
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
9,000
20
Durango
00 - 03
65029
15, 18mm, 7/8"
–
–
JW
300
9,000
25
F-350 Styleside, All Models Inc. Super Cab
92 - 96
65003
15, 16, 18mm, T-30 Torx
–
–
JV
500
9,000
30
13mm, 7/8"
21mm, 13/16", 15/16"
–
95 - 99
65014
65015
–
Pickup, Ram Sport
JT,KB
JW
500
500
9,000
9,000
25
25
Pickup, Ram, Full Size
94 - 01
65003
15, 16, 18mm, T-30 Torx
–
–
JV
500
9,000
30
F-350 Heavy Duty
1997
–
02 - 05
65033
3/4"
–
–
GP
500
9,000
25
13mm, 7/8"
21mm, 13/16", 15/16"
–
Pickup, Ram, Full Size, 1500 Only, All Models
65014
65015
JT,KB
JW
500
500
9,000
9,000
25
25
2002
65003
15, 16, 18mm, T-30 Torx
–
–
JV
500
9,000
30
F-350 Super Duty
99 - 07
65022
15, 18mm, 3/4"
SAFETY
5/8"
AA,KI
500
9,000
40
2002
65003
15, 16, 18mm, T-30 Torx
–
–
JV
500
9,000
30
F-350 Super Duty
2008
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
Pickup, Ram, Full Size, 2500 HD, Inc. Mega Cab, 2 & 4 WD
03 - 09
65046
18mm, 3/4" socket
SAFETY
1/2", 1-1/4" –
500
9,000
40
08 - 10
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
Pickup, Ram, Full Size, 3500 HD, Inc. Mega Cab & Dually, 2 & 4 WD
03 - 09
65046
18mm, 3/4" socket
SAFETY
1/2",1-1/4"
–
500
9,000
40
08 - 10
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
9,000
20
09 - 12
65058
18mm, 7/8"
SAFETY
1/2"
EP,GP
500
9,000
35
11 - 12
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
9,000
20
Pickup, Ram, Full Size, 2500 HD, Inc. Mega Cab, 4 WD Only
10 - 11
65057
18mm deep well, 7/8"
–
–
EP,GP,JW
500
9,000
40
F-350 Super Duty Cab & Chassis, w/34 Wide Frames
99 - 07
65022
15, 18mm, 3/4"
SAFETY
5/8"
AA,KI
500
9,000
40
2008
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
F-350 Super Duty Cab & Chassis, 2WD (App. starts with 2008-1/2)
08 - 11
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
08 - 11
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
9,000
20
F-450 Super Duty
2008
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
08 - 10
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
MODEL
Suburban, All 2500 Series, 2 & 4 WD
Tahoe, Old Body Style
Tahoe, All 1500 Series, 2 & 4 WD
TrailBlazer, Downsize, All Models
00 - 06
95 - 00
00 - 06
99 - 01
65028
65005
65023
65004
18mm, 3/4", 7/8"
10, 18mm, 7/8"
18mm, 3/4"
15mm, 11/16"
SAFETY
SAFETY
SAFETY
SAFETY
9/16"
1/2"
1/2"
7/16"
HB
JU,JV
–
JW,JX,X
500
500
500
300
9,000
9,000
9,000
9,000
FORD
91 - 07
65001
7/8"
SAFETY
1/2"
–
500
9,000
20
08 - 12
65053
SAFETY
3/8", 1/2"
EP,GP,JV
500
9,000
40
91 - 07
65001
7/8"
SAFETY
1/2"
–
500
9,000
20
08 - 12
65053
SAFETY
3/8", 1/2"
EP,GP,JV
500
9,000
40
MODEL
215
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MODELMOUNT
FRONT
FRONT MOUNT
MODEL
214
REESE TOWPOWER
YEAR
HITCH
NUMBER
WRENCHES
SAFETY
GLASSES
DRILL BITS
FOOTNOTES
VERT LOAD
LINE PULL
INSTALL TIME
INSTALL TIME
JW,JX,X
300
9,000
30
Cherokee, Downsize, All Models (Will Not Fit Grand Cherokee)
84 - 01
65009
15mm, 7/8"
SAFETY
1/2"
JV
300
9,000
30
Comanche
86 - 92
65009
15mm, 7/8"
SAFETY
1/2"
JV
300
9,000
30
20
Grand Cherokee
93 - 98
65008
15mm, 16mm
–
–
JV
300
9,000
25
9,000
20
Grand Wagoneer
1993
65008
15mm, 16mm
–
–
JV
300
9,000
25
500
9,000
40
TJ, Canada
97 - 06
65048
10, 15mm, T-45, T-55 Torx
–
–
X
300
9,000
25
GP
500
9,000
20
Wagoneer, Downsize, All Models (Will Not Fit Grand Wagoneer)
84 - 90
65009
15mm, 7/8"
SAFETY
1/2"
JV
300
9,000
30
–
GP
500
9,000
20
Wrangler
87 - 95
65048
–
–
X
300
9,000
25
–
–
GP,X
500
9,000
20
10mm, 15mm, T-45,
T-55 Torx
10, 15, 17mm, 3/4"
–
–
–
300
9,000
35
Wrangler, All, Inc. Unlimited
97 - 06
65048
10, 15mm, T-45, T-55 Torx
–
–
X
300
9,000
25
10, 15, 17mm, 3/4"
–
–
JY
300
9,000
35
Wrangler
07 - 12
65055
3/4"
–
–
EP,GP
500
9,000
40
8, 10, 12mm, 7/8"
SAFETY
1/2"
–
500
9,000
35
Wrangler, Unlimited, 4 Dr.
07 - 12
65055
3/4"
–
–
EP,GP
500
9,000
40
YJ, Canada
87 - 95
65048
10, 15mm, T-45, T-55 Torx
–
–
X
300
9,000
25
Mark LT
06 - 08
65043
7/8"
–
–
–
500
9,000
20
Mark LT, (Mexico Only), 2 & 4 WD
2010
65054
3/4", 7/8", 15/16"
–
–
EP,GP
500
9,000
30
Navigator
98 - 02
65025
7, 8, 10, 15mm, 7/8"
–
–
–
500
9,000
20
Navajo
91 - 94
65017
10, 15, 17mm, 3/4"
–
–
JY
300
9,000
35
Pickup B-Series, All Models
94 - 97
65017
10, 15, 17mm, 3/4"
–
–
JY
300
9,000
35
Pickup B-Series, All Models
01 - 05
65024
8, 10, 12mm, 7/8"
SAFETY
1/2"
–
500
9,000
35
02 - 05
65032
19mm
SAFETY
1/2"
–
500
9,000
30
96 - 01
65004
15mm, 11/16"
SAFETY
7/16"
JW,JX,X
300
9,000
30
Sequoia
01 - 07
65031
18, 19mm, 3/4"
SAFETY
1/2"
–
500
9,000
40
Tacoma Pickup
01 - 04
65041
18, 19mm, 3/4"
SAFETY
11/16"
–
500
9,000
30
Tundra
00 - 06
65031
18, 19mm, 3/4"
SAFETY
1/2"
–
500
9,000
40
Tundra
07 - 12
65051
17n, 18mm, 7/8"
–
–
HM,KG
500
9,000
25
LINE PULL
7/16"
VERT LOAD
SAFETY
FOOTNOTES
15mm, 11/16"
DRILL BITS
65004
SAFETY
GLASSES
96 - 00
WRENCHES
HITCH
NUMBER
MODEL
YEAR
FORD Continued
MODEL
ISUZU
08 - 10
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
9,000
20
Hombre
2011
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
9,000
20
JEEP
99 - 07
65022
15, 18mm, 3/4"
SAFETY
5/8"
AA,KI
500
9,000
40
2008
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
20
08 - 11
65049
13/16", 7/8", 15/16"
–
–
GP
500
9,000
08 - 11
65049
13/16", 7/8", 15/16"
–
–
GP,X
500
99 - 07
65022
15, 18mm, 3/4"
SAFETY
5/8"
AA,KI
2008
65049
13/16", 7/8", 15/16"
–
–
08 - 11
65049
13/16", 7/8", 15/16"
–
08 - 11
65049
13/16", 7/8", 15/16"
Ranger Pickup, All Models
89 - 92
65017
93 - 97
65017
01 - 05
65024
GMC
Jimmy, Full Size
92 - 94
65005
10, 18mm, 7/8"
SAFETY
1/2"
JU,JV
500
9,000
40
Jimmy, Downsize, All Models
95 - 02
65004
15mm, 11/16"
SAFETY
7/16"
JW,JX,X
300
9,000
30
Pickup, C Series, 2 Dr. Regular & Extended Cabs, 2WD
88 - 00
65021
10, 18mm, 7/8"
Pickup, C Series, 4 Dr. Crew Cab, 2WD
92 - 00
65021
10, 18mm, 7/8"
Pickup, C/K Series, 2 Dr. Regular & Extended Cabs
88 - 00
65005
Pickup, K Series, 4 Dr. Crew Cab, 4WD
92 - 00
65005
Pickup, Sierra, 1500 LD 6.6 ft. Bed, 2 & 4 WD, Except Denali (Classic)
99 - 07
65023
SAFETY
1/2"
SAFETY
1/2"
10, 18mm, 7/8"
SAFETY
1/2"
10, 18mm, 7/8"
SAFETY
1/2"
18mm, 3/4"
Pickup, Sierra, 1500 LD 8 ft. Bed, 2 & 4 WD, Except Denali (Classic)
99 - 07
65023
18mm, 3/4"
Pickup, Sierra, 2500 LD 6.6 ft. Bed, 2 & 4 WD
99 - 04
65028
Pickup, Sierra, 2500 LD 8 ft. Bed, 2 & 4 WD
99 - 04
65028
Pickup, Sierra, 1500 HD 6.6 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
Pickup, Sierra, 2500 HD 6.6 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
Pickup, Sierra, 2500 HD 8 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
Pickup, Sierra, 3500 Series 8 ft. Bed, 2 & 4 WD (Classic)
01 - 07
65028
Pickup, Sierra, 1500 LD 5.8 ft. Bed, 2 & 4 WD, Except Denali (Classic)
04 - 07
Pickup, Sierra, 1500 LD 5.8 ft. Bed, 2 & 4 WD (New Body Style)
SAFETY
1/2"
SAFETY
1/2"
18mm, 3/4", 7/8"
SAFETY
9/16"
18mm, 3/4", 7/8"
SAFETY
9/16"
18mm, 3/4", 7/8"
SAFETY
9/16"
18mm, 3/4", 7/8"
SAFETY
9/16"
18mm, 3/4", 7/8"
SAFETY
9/16"
18mm, 3/4", 7/8"
SAFETY
9/16"
65023
18mm, 3/4"
SAFETY
07 - 12
65052
3/4", 7/8"
Pickup, Sierra, 1500 LD 6.6 ft. Bed, 2 & 4 WD (New Body Style)
07 - 12
65052
Pickup, Sierra, 1500 LD 8 ft. Bed, 2 & 4 WD (New Body Style)
07 - 12
Pickup, Sierra, 2500 HD 6.6 ft. Bed, 2 & 4 WD (New Body Style)
Pickup, Sierra, 2500 HD 8 ft. Bed, 2 & 4 WD (New Body Style)
JV,KD,KE
500
9,000
30
500
9,000
30
JU,JV,KC
500
9,000
40
JU,JV,KC
500
9,000
40
JV,KD,KE
–
500
9,000
20
500
9,000
20
HB
500
9,000
20
HB
500
9,000
20
HB
500
9,000
20
HB
500
9,000
20
HB
500
9,000
20
HB
500
9,000
20
1/2"
–
500
9,000
20
–
–
GP,X
500
9,000
25
3/4", 7/8"
–
–
GP,X
500
9,000
25
65052
3/4", 7/8"
–
–
GP,X
500
9,000
25
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
07 - 10
65050
18, 21mm, 3/4"
–
–
EP,GP,RZ
500
9,000
40
Pickup, Sierra, 2500 HD 6.6 ft. Bed, 2 & 4 WD, Except Denali HD (New Body Style)
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
Pickup, Sierra, 2500 HD 8 ft. Bed, 2 & 4 WD, Except Denali HD (New Body Style)
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
11 - 12
65056
18mm, 3/4"
–
–
EP,GP,RZ
500
9,000
45
94 - 04
65004
15mm, 11/16"
SAFETY
7/16"
JW,JX,X
300
9,000
30
Savana Van, Full Size
96 - 02
65016
10, 15, 17mm, 3/4"
SAFETY
1/2"
X
500
9,000
35
Savana Van, RV Cutaway Only
2003
65016
10, 15, 17mm, 3/4"
SAFETY
1/2"
X
500
9,000
35
Suburban
92 - 99
65005
65021
10, 18mm, 7/8"
10, 18mm, 7/8"
SAFETY
SAFETY
1/2"
1/2"
JU,JV,KC
JV,KD
500
500
9,000
9,000
40
30
Yukon, Old Body Style
92 - 00
65005
10, 18mm, 7/8"
SAFETY
1/2"
JU,JV
500
9,000
40
Yukon, All 1500 Series, 2 & 4 WD
00 - 06
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
20
Yukon Denali, All 1500 Series, 2 & 4 WD
01 - 06
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
30
Yukon XL, All 1500 Series, 2 & 4 WD
00 - 06
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
20
Yukon XL, All 2500 Series, 2 & 4 WD
00 - 06
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
Yukon XL Denali, All 1500 Series, 2 & 4 WD
01 - 06
65023
18mm, 3/4"
SAFETY
1/2"
–
500
9,000
30
Yukon XL Denali, All 2500 Series, 2 & 4 WD
01 - 06
65028
18mm, 3/4", 7/8"
SAFETY
9/16"
HB
500
9,000
20
–
LINCOLN
MAZDA
MERCURY
Mountaineer
OLDSMOBILE
Bravada
TOYOTA
FootNOTE ABBREVIATIONS
@ Ultra Frame ball mount must be used to achieve maximum
weight carrying rating.
JT 2WD models only.
JU License plate relocation required to install hitch, see 5443
(Sold separately).
JV Rubber air deflector/facia must be removed or trimmed to install
hitch.
JW 4WD models only.
JX Requires factory tow hooks for installation on 2WD models.
JY Extensive fascia cutting required on models w/fog lamp option.
KB Diesel engine models only.
KC Does not fit 2500/3500 2WD (C-Series) models w/8 lug wheels.
KD Fits 2500/3500 2WD (C-Series) models w/8 lug wheels only.
KE Does not fit 88-91 4 Dr. Crew Cab models.
KG Skid shield must be removed if present.
KI Optional OEM Fog Lights must be removed for receiver installation.
RZ License plate holder relocation and or modification required to install
hitch. See 49802 or 5443 (sold separately).
217
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
FRONT MOUNT
FRONT MOUNT
216

Towing Hitch Application Guide

Transcription

Similar documents

applications guide instructions

TABLE OF CONTENTS - Truck Accessories