Tufline Parts - Farmco Distributing Inc

Transcription

2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
Prices subject to change without
notice.
1
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
PARTS PRICE LIST
Monroe Tufline
P.O. Box 7755 / 2219 Tufline Lane
Columbus, MS 39705
(p) 662-328-8347 (f) 662-328-8361
email: [email protected]
Index
Parts Ordering Options...............................................................................................3
Quick Reference Chart for disc axle components ...............................................4-10
AXLES .....................................................................................................................11-12
SPECIAL CUT AXLES..................................................................................................13
Shanks and Cutting Edges....................................................................................14-16
Wheel Hub Components.............................................................................................17
DISC BLADES ..............................................................................................................18
ALPHA-NUMERIC LISTING ....................................................................................18-27
NUMERIC LISTING .................................................................................................27-63
NOTES:
1. All parts’ prices are FOB, Columbus, MS
2. Special axles and other special made parts are non-returnable
3. A minimum 15% restocking fee will be charged on returned parts
Returned parts should be shipped pre-paid to:
Monroe Tufline
2219 Tufline Lane
Columbus, MS 39705
4. Prices are subject to change without notice
5. Minimum order is $15.00 list price
6. Most parts are in stock and available for shipment if ordered by
10:00AM CST
7. Effective date: JANUARY 2015
8. UPS Next Day Air, 2nd Day Air and other special priority shipments
are not guaranteed due to weather related issues, therefore, no
credit will be issued due to these delays.
2
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
PARTS ORDERING OPTIONS
ORDER ON LINE at www.monroetufline.com/dealers
Enter your user name and password or click the sign up button .
This site offers on line ordering of parts and whole goods, and also has many dowloads
available, such as, parts schematics to assist you in determining what parts are needed.
Benefits of ordering on line:
Receive Order confirmation by e-mail.
Receive Shipment notification by e-mail.
Receive UPS Tracking number by e-mail.
Know the total cost including shipping before you receive your order.
Save time and money!
Please call Sid Perkins if you have any questions about this site and On-line ordering.
GIVE US A CALL: We always welcome your call and realize that sometimes it’s just better to talk to someone in order to determine your parts needs. Our knowledgeable
staff includes - Sid Perkins, and Neel Abrams.
Please give any of them a call today at 662-328-8347 to place your order.
SEND US A FAX: Simply Fax us your orders‑ with your shipping address and we will ship it
out for you.
We will gladly drop ship to your customers at no extra cost.
3
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
QUICK REFERENCE
7/8” AXLE COMPONENTS
T-10
OBSOLETE
T-11
T-12
OBSOLETE
OBSOLETE
T-7
T-8
7/8” Axle Components
Part #
T-7
T-8
T-10
T-11
T-12
T-8035
4
Description
End Washer 7/8”
Bumper Washer 7/8”
Bearing Spool 7/8” x 7 1/2” OBSOLETE
Bottom Cap OBSOLETE
Top Cap OBSOLETE
Spacer Spool 7/8” x 7 1/2” (NOT SHOWN)
List
$9.49
$21.30
NA
NA
NA
$23.04
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
QUICK REFERENCE
1” AXLE COMPONENTS
13425
13424
13419
13428
13420
13427
13422
13426
13423
13689
1” Axle Components
Part #
13422
13423
13419
13420
13424
13425
13426
13427
13428
13689
Description
End Washer 1”
Bumper Washer 1”
Bearing Spool 1” x 7 1/2”
Cap with Grease Fitting
Spacer Spool 7 1/2”
Spacer Spool 9”
End Spacer 1” x 2 3/8”
1” Bearing Flange Housing (ST208-1)
List
8.45
19.43
16.15
13.54
16.87
21.79
15.08
15.52
19.43
36.29
5
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
QUICK REFERENCE
1 1/8” AXLE COMPONENTS
1 1/8” Axle Components
Part #
T-1
T-2
T-3
14905
T-4
T-5
T-6
T-46
T-47
T-48
T-49
T-91
14906
TMB
T-602
T-722
TMBT602
TMBRT602R
TMB/R
T-602R
TPB
T-60
11479
TPBT60
T-OR1
11170
15564
TPBT60
6
Description
List
$11.66
$20.48
$39.91
$28.69
NA
NA
NA
$15.74
$21.43
$18.06
$24.14
$37.97
$25.97
$30.10
$57.88
$1.74
$92.61
$109.97
$34.84
$62.51
$36.01
$36.45
$5.33
$62.63
$17.07
$11.81
$42.14
End Washer 1 1/8”
Bumper Washer 1 1/8”
Spacer Spool 9”
Spacer Spool 9”
Bearing Spool 1 1/8” x 9” OBSOLETE
Bottom Cap OBSOLETE
Top Cap OBSOLETE
End Spacer 1 1/8’ x 3” (For 7 1/2” Spacing)
End Spacer 1 1/8” x 3” (For 7 1/2” Spacing)
End Spacer 1/18” x 3 3/4” (For 9” Spacing)
End Spacer 1 1/8” x 3 3/4” (For 9” Spacing)
Spacer Spool 1 1/8” x 7 1/2”
Trunion Housing
Trunion Bearing (W208PPB12)
Snap Ring 3 1/2”
Trunion Housing & Bearing Assembly
Regreasable Trunion Housing & Bearing Assembly
Regreasable Trunion Housing
Regreasable Bearing (GW208PP17)
Pillow Block Housing
Pillow Block Bearing (W208PPB5)
Flangette 1 1/8”
PB Housing & Bearing Assembly
Outrigger Washer 1 1/8”
Spacer Washer 1 1/8”
Flangette & Bearing Assembly
TPB
T60
15564
11479
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
QUICK REFERENCE
14905
T-4
OBSOLETE
OBSOLETE
T-48
T-5
OBSOLETE
T-46
T-2
14906
T-91
T-3
T-6
T-47
T-49
T-OR1
T-1
TMBT602
TMB
T-602
T-722
TMBRT602R
TMB/R
T-602R
7
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
QUICK REFERENCE
1 1/2” Axle Components
Part #
T-492
T-491
T-495
T-103
T-104
T-105
T-106
T-107
End Washer 1 1/2”
Bumper Washer 1 1/2”
End Spacer 1 1/2” x 3 3/4” (For 9” Spacing)
Spacer Spool 1 1/2” x 9”
End Spacer 1 1/2” x 4 1/2” (For 10 1/2” Spacing)
End Spacer 1 1/2” x 4 1/2” (For 10 1/2” Spacing)
2 5/16” Concave End Spacer (For 10 1/2” Shock Flex Spacing)
List
$23.86
$48.04
$53.83
$74.67
$85.20
$64.83
$52.68
$39.38
T-108
TMD
T-604IP
T-729
TMDT604IP
TMDRT604RIP
TMDR
T-604RIP
T-OR15
15376
5 9/16” Convex End Spacer (For 10 1/2” Shock Flex Spacing)
Trunion Housing 1 1/2”
Bearing 1 1/2” (W211PP3)
Snap Ring 4”
Bearing & Housing
Trunion Bearing & Housing Regreasable
Trunion Housing Regreasable
Regreasable Bearing 1 1/2” (GW211PP3)
Spacer Washer 1 1/2”
$56.16
$55.57
$97.24
$3.48
$113.45
$129.65
$54.64
$97.95
$25.47
$11.69
8
Description
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
QUICK REFERENCE
T-104
T-105
T-106
T-491
T-103
T-108
T-492
T-495
T-107
T-OR15
TMDT604IP
TMDRT604RIP
T-604RIP
T-604IP
T-729
TMDR
TMD
9
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
QUICK REFERENCE
OUTRIGGER COMPONENTS
T-703
T-OR2
T-703
T-OR2
T-OR1
T-OR15
10
Part #
T-OR15
OUTRIGGER COMPONENTS
T-OR1
Description
Pair of Outrigger Assemblies for OR1, 1 1/8” Axle Less Blade
Outrigger Half
List
$147.02
$36.29
$17.07
$25.47
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
AXLES
-------------------------------------------------------------------------------------------------------------------------------------PART
LIST
NUMBER
DESCRIPTION
PRICE
-------------------------------------------------------------------------------------------------------------------------------------T-138
T-15
T-16
13173
T-19A
T-21
11316
11317
11318
T-19A
T-21
AXLES 7/8” SQUARE WITH REGULAR SQ. HEAD
AXLE 7/8” SQ. X 18 3/8” 3-BLADE, 7 ½” SPACING
AXLE 7/8” SQ. X 33 ½” 5-BLADE, 7 ½” SPACING
AXLE 7/8” SQ. X 41 ½” 6-BLADE, 7 ½” SPACING
LOCKNUT 7/8”
LOCK WASHER 7/8”
AXLES – 7/8” SQ. W/BUMPER WASHER WELDED ON
AXLE 7/8” SQ. X 25” 4-BLADE, 7 ½” SPACING
LOCKNUT 7/8”
LOCK WASHER 7/8”
$38.66
$42.95
$46.65
$54.64
$4.28
$1.04
$49.31
$57.30
$63.90
$4.28
$1.04
AXLES- 1” SQUARE W/REGULAR SQUARE HEAD
15187
13429
13430
13431
13432
13433
13434
T-34
T-606
10332
T-131
T-13
T-14
T-130
T-132
T-133
T-141
T-142
T-143
T-144
T-20
T-698
T-18A
11170
AXLE 1” SQ. X 18” 3-BLADE, 7 ½” SPACING
AXLE 1” SQ. X 25 ¾” 4-BLADE, 7 ½” SPACING
AXLE 1” SQ. X 33 ¼” 5-BLADE, 7 ½” SPACING
AXLE 1” SQ. X 40 ¾” 6-BLADE, 7 ½” SPACING
AXLE 1” SQ. X 21 1/4” 3-BLADE, 9” SPACING
AXLE 1” SQ. X 30 ½” 4-BLADE, 9” SPACING
AXLE 1” SQ. X 39 1/4” 5-BLADE, 9” SPACING
LOCK WASHER 1”
FLAT WASHER 1”
LOCKNUT 1”
AXLES – 1 1/8” SQ. W/REGULAR SQUARE HEAD
LENGTHS MEASURED UNDER SQUARE HEAD
AXLE 1 1/8” SQ. X 21 ¼” 3-BLADE, 9” SPACING
AXLE 1 1/8” SQ. X 31” 4-BLADE, 9” SPACING
AXLE 1 1/8” SQ. X 18 5/8” 3-BLADE, 7 ½” SPACING
AXLE 1 1/8” SQ. X 26 ½” 4-BLADE, 7 ½” SPACING
AXLE 1 1/8” SQ. X 34” 5-BLADE, 7 ½” SPACING
AXLE 1 1/8” SQ. X 41 ¾” 6-BLADE, 7 ½” SPACING
AXLE 1 1/8” SQ. X 49 ¼” 7-BLADE, 7 ½” SPACING OR 6-BLADE,
9” SPACING
AXLE 1 1/8” SQ. X 58 ½” 7-BLADE, 9” SPACING
LOCK WASHER 1 1/8”
FLAT WASHER 1 1/8”
LOCKNUT 1 1/8”
SPACER WASHER
$36.96
$43.87
$52.32
$64.13
$42.14
$49.08
$61.93
$1.16
$1.27
$5.56
$41.33
$53.95
$67.61
$41.33
$48.16
$59.96
$68.99
$79.30
$91.92
$97.24
$1.27
$1.39
$8.09
$11.81
11
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
AXLES
--------------------------------------------------------------------------------------------------------------------PART
LIST
NUMBER
DESCRIPTION
PRICE
---------------------------------------------------------------------------------------------------------------------
AXLES – 1 1/8” RC SQ. HI-YIELD C1045 COLD DRAWN
THREADED ON EACH END
12
11319
11320
11321
11322
11323
11324
11325
11326
11327
11328
11329
11330
11331
11332
T-20
T-18A
11398
AXLE 1 1/8” SQ. X 42 ¾” 6-BLADE, 7 ½” SPCAING
AXLE 1 1/8” SQ. X 72 ¼” 10-BLADE 7 ½” SPACING
AXLE 1 1/8” SQ. X 59 3/8” 7-BLADE, 9” SPACING
LOCKNUT 1 1/8”
SQUARE NUT 1 1/8”
$88.56
$96.89
$105.00
$112.41
$119.58
$127.11
$132.78
$86.94
$95.16
$104.07
$112.29
$120.86
$129.31
$137.53
$1.27
$8.09
$34.50
9879
9880
9881
9882
9883
9869
9870
9871
9872
9873
11339
11340
T-728
T-727A
11397
9472
15376
AXLES – 1 ½” RC SQ. HI-YIELD C1045 COLD DRAWN
AND THREADED ON EACH END
AXLE 1 ½” SQ. X 34 1/8” 4-BLADE, 9” SPACING
AXLE 1 ½” SQ. X 43 ¼” 5-BLADE, 9” SPACING
AXLE 1 ½” SQ. X 52 ¾” 6-BLADE, 9” SPACING
AXLE 1 ½” SQ. X 37 5/8” 4-BLADE, 10 ½” SPACING
AXLE 1 ½” SQ. X 48 ¼” 5-BLADE, 10 ½” SPACING
AXLE 1 ½” SQ. X 58 ¾” 6-BLADE, 10 ½” SPACING
AXLE 1 ½” SQ. X 79 5/8” 8-BLADE, 10 ½” SPACING
AXLE 1 ½” SQ. X 90 ¼” 9-BLADE, 10 ½” SPACING
LOCKNUT 1 1/2”
SQUARE NUT 1 1/2”
JAM NUT 1 1/2”
SPACER WASHER
$144.58
$160.46
$178.85
$185.80
$214.17
$145.51
$163.46
$182.21
$207.33
$235.69
$251.44
$292.42
$3.24
$17.71
$39.36
$6.95
$11.69
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
SPECIAL CUT AXLES
SPECIAL LENGTH AXLES MADE OF THE FOLLOWING MATERIAL SIZES.
SPECIFY LENGTH OF AXLE UNDER HEAD AND LENGTH OF THREAD.
MULTIPLY LENGTH OF AXLE, IN INCHES, BY THE BELOW LISTED
MULTIPLIER TO ESTABLISH LIST PRICE AND WEIGHT.
MATERIAL SIZE
LIST PRICE MINIMUM LIST
WEIGHT PER
PER INCH
PRICE
INCH
7/8” SQUARE
1” RC SQUARE
1” CR ROUND
1 1/8” RC SQUARE
C1045
1 1/8” ROUND
1 ½” RC SQUARE
C1045
1 ½” ROUND
$ 2.75
$ 2.75
$ 3.00
$ 3.20
$ 3.35
$ 4.10
$ 70.00
$ 7500
$ 75.00
$ 85.00
$ 85.00
$ 130.00
.2168#
.2225#
.223#
.361#
.282#
.638#
$ 4.10
$ 125.00
.50#
STANDARD HEAD SIZES AVAILABLE:
1 ¼” SQUARE, 3/8” THICK
2 ½” SQUARE, ½” THICK
1 ¾” SQUARE, ½” THICK
4” ROUND, ½” THICK
ADDITIONAL CHARGES
EXTRA THREADS $ 1.15 per inch
EXAMPLE
EXAMPLE: 48 INCH AXLE – 1 1/8” SQ. C1045 MATERIAL
48 X $3.20 = $ 153.60 LIST
WEIGHT 48 X .361 = 17.33#
NOTE: ALLOW AT LEAST 5 WORKING DAYS BEFORE SHIPMENT.
SPECIAL AXLES ARE NON-RETURNABLE.
ALL SPECIAL AXLES ARE NON-RETURNABLE
MEASURE
FROM THREAD TIP TO THREAD TIP
MEASURE
FROM UNDER HEAD TO THREAD TIP
13
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
QUICK REFERENCE
SCARIFIER SHANKS
10677S
REAR NOTCHED
SHANK
14834
REAR NOTCHED
SHANK
14835F
FRONT NOTCHED
SHANK
10697
15513
Part #
10677S
14834
14835F
10697
15513
10685
14
SCARIFIERS
Description
SCARIFIER SHANK W/CRIMP ON POINT
( TB0, TB1, TB2 )
SCARIFIER SHANK W/ WELD ON POINT
(TBX)
SCARIFIER SHANK, FRONT NOTCHED, WELD ON POINT
(TB25, TB30,TB40)
SCARIFIER POINT ONLY
REPLACEMENT POINT FOR BOX SHANK 10677S
List
$49.31
$49.79
$54.87
SHANK KEY AND CHAIN (WELD ON)
$10.88
$13.94
$10.07
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
QUICK REFERENCE
CUTTING EDGES
TWO HOLE
END PATTERN
ONE HOLE
END PATTERN
10699
Part #
10699
T-22
T-24
10745
10746
10701
14420
10702
10703
10704
12566
10705
10706
13455
13456
CUTTING EDGES
Description
5/8” X 1 3/4” PLOW BOLT
HEX NUT 5/8”
LOCK WASHER 5/8”
CUTTING EDGE
36”
CUTTING EDGE
42”
CUTTING EDGE
48”
CUTTING EDGE
54”
CUTTING EDGE
60”
CUTTING EDGE
66”
CUTTING EDGE
72”
CUTTING EDGE
78”
CUTTING EDGE
84”
CUTTING EDGE
96”
CUTTING EDGE
108”
CUTTING EDGE
120”
T-24
T-22
# OF BOLTS # OF BOLTS
TWO HOLE ONE HOLE
5
6
6
7
7
8
8
9
9
10
11
12
3
4
4
5
5
6
6
7
7
8
9
10
List
$1.74
$0.69
$0.46
$61.24
$71.54
$81.61
$93.54
$105.05
$115.52
$125.77
$136.53
$146.70
$167.71
$197.03
$218.33
15
Effective:
December 23, 2013
notice.
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
QUICK REFERENCE
PRC AND V-PLOW SHANKS
13360
13403
PRC SHANK COMPONENTS
Part #
13360
13403
12612
10697
Description
RENOVATOR SHANK FOR PRC
REPLACEABLE POINT FOR PRC SHANK
SCARIFIER SHANK WITH POINT FOR PRC
SCARIFIER POINT ONLY
VP24
VP28
VP32
List
$74.32
$29.64
$55.80
$13.94
VP35M
MT13454
VP25
V-PLOW SHANK COMPONENTS
Part #
Description
VP24
VP28
VP32
MT13454
VP35M
VP25
24” V-PLOW SHANK
28” V-PLOW SHANK
32” V-PLOW SHANK
V-PLOW POINT (HEAT TREATED)
REVERSIBLE V-PLOW POINT
ROLL PIN 7/16” X 2”
16
List
$457.26
$485.04
$497.78
$53.25
$113.45
$1.50
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
Effective:
December 23, 2013
notice.
QUICK REFERENCE
WHEEL HUB COMPONENTS
T-572
13630
T-342
T-564
T-603 T-567
T-576
T-575
T-574
T-577
WHEEL HUB COMPONENTS
Part #
13630
T-342
T-564
T-567
T-572
T-574
T-575
T-576
T-577
T-603
T-582
T-583
Description
HUB & SPINDLE ASSY ( 5 BOLT HUB 1 5/8 SPINDLE)
COTTER PIN 5/32” X 1 1/4”
SPINDLE 1 5/8”
SLOTTED NUT 3/4”
HUB ASSEMBLY ( INCLUDES 5 LUG NUTS)
WHEEL BEARING 3/4” (LM11949)
WHEEL BEARING 1 1/4” (LM67048)
SEAL 1 1/2” (47S278Z)
HUBCAP
SPINDLE WASHER 3/4”
WHEEL BEARING CUP 1 3/8” (LM11910) RACE
WHEEL BEARING CUP 2” (LM67010) RACE
List
$200.17
$1.08
$42.95
$3.82
$114.03
$16.21
$20.72
$6.48
$6.83
$1.04
$17.92
$19.32
17
Effective:
December 23, 2013
notice.
PART #
5-16118-1
5-16118-2
5-18118-1
5-18118-2
2-18138-1
2-18138-2
2-20138-1
2-20138-2
2-22157-1
2-22157-2
2-22177-1
2-22177-2
3-22177-1
3-22177-2
3-24256-1
3-24256-2
3-26256-1
3-26256-2
3-28310-1
3-28310-2
17157-1C
MT13454
T-1
T-10
T-1001
T-1002
T-1003
T-1004
T-1005
T-1006
T-1007
T-1008
T-1009
T-1010
T-1011
T-1012
T-103
18
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
DISC BLADES
DESCRIPTION
16” X 3MM X 1” SQ. C.H. PLAIN BLADE
16” X 3MM X 1” SQ. C.H. NOTCHED BLADE
18” X 3MM X 1” SQ. C.H. PLAIN BLADE
18” X 3MM X 1” SQ. C.H. NOTCHED BLADE
18” X 3.5MM X 1” - 1 1/8” DUAL C.H. PLAIN BLADE
18” X 3.5MM X 1” - 1 1/8” DUAL C.H. NOTCHED BLADE
20” X 3.5MM X 1 1/8” C.H. PLAIN BLADE
20” X 3.5MM X 1 1/8” C.H. NOTCHED BLADE
22” X 4MM X 1 1/8” C.H. PLAIN BLADE
22” X 4MM X 1 1/8” C.H. NOTCHED BLADE
17” X 4MM PLAIN COULTER BLADE
ALPHA-NUMERIC LISTING
Point for V-plow for units with serial greater than 21270
END WASHER 1 1/8”.........................................................
BEARING SPOOL 7/8” X 7 1/2”.........................................
GANG BEAM, 5” X 3” X 63”, (OFFSET HARROW).........
GANG BEAM, 6” X 4” X 105”, (OFFSET HARROW).......
SPACER SPOOL, 1 1/2 X 9
LIST
$30.10
$27.78
$38.00
$36.00
$37.62
$38.43
$57.88
$53.25
$78.72
$74.09
$79.88
$81.61
$79.88
$81.61
$129.89
$135.00
$136.48
$141.58
$223.07
$233.03
$58.34
$53.25
$11.66
$25.47
$243.67
$273.39
$308.85
$323.58
$338.73
$355.28
$373.00
$384.22
$428.94
$474.63
$517.57
$607.87
$74.67
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
T-104
T-105
T-106
T-107
T-108
T-11
T-12
T-13
T-130
T-131
T-132
T-133
T-138
T-14
T-141
T-142
T-143
T-144
T-147
T-149
T-15
T-151
T-152
T-156
T-158
T-159
T-16
T-163
T-17
T-170
T-18
T-18A
T-19
T-19A
T-2
T-20
T-21
T-22
T-23
T-24
Effective:
December 23, 2013
notice.
SPACER SPOOL, 1 ½” X 10 ½”.........................................
HALF SPACER, 1 ½” , FOR 10 ½” SPACING....................
HALF SPACER, 1 ½”, FOR 10 ½” SPACING....................
2 5/16” Concave End Spacer (For 10 1/2” Shock Flex Spacing)
5 9/16” Convex End Spacer (For 10 1/2” Shock Flex Spacing)
BOTTOM CAP....................................................................
TOP CAP.............................................................................
AXLE 1 1/8” X 31” (4 BLADE 9” SPACING)....................
AXLE 1 1/8” X 18 5/8” (3 BLADE, 7 ½” SPACING)..........
AXLE 1 1/8” X 21 1/4” (3 BLADE, 9” SPACING)..............
AXLE 1 1/8 “ X 26 ½” (4 BLADE, 7 ½” SPACING)...........
AXLE 1 1/8” X 34” (5 BLADE, 7 ½” SPACING)................
AXLE 7/8” X 18 3/8” (3 BLADE, 7 ½” SPACING).............
AXLE 1 1/8” X 40” (5 BLADE 9” SPACING)....................
AXLE 1 1/8” X 41 ¾” (6 BLADE, 7 ½” SPACING)............
AXLE 1 1/8” X 49 ¼” (7 BLADE, 7 ½” SPACING AND 6 BLADE, 9”
SPACING)........................................................
AXLE 1 1/8” X 56 5/8” (8 BLADE, 7 ½” SPACING)..........
AXLE 1 1/8” X 58 ½” (7 BLADE, 9” SPACING)................
AXLE 1 ½” X 23 5/8” (3 BLADE, 9” SPACING)................
AXLE 1 ½” X 26” ( 3 BLADE, 10 ½” SPACING)...............
AXLE 7/8” X 26 3/8” (4 BLADE 7 ½ SP.)..........................
AXLE 1 ½” X 32 7/8” (4 BLADE, 9” SPACING)................
AXLE 1 ½” X 36 ½” (4 BLADE, 10 ½”SPACING”)............
AXLE 1 ½” X 42” (5 BLADE, 9” SPACING)......................
AXLE 1 ½” X 47” (5 BLADE, 10 ½” SPACING)...............
AXLE 1 ½” X 51 ½” (6 BLADE, 9” SPACING)..................
AXLE 7/8” X 33 ½” (5 BLADE 7 ½ SP.).............................
GANG BEAM 3” X 3” X 33”...............................................
HEX NUT 3/8”....................................................................
AXLE 1 ½” X 57 ½” (6 BLADE, 10 ½” SPACING)............
HEX NUT 1 1/8” ................................................................
LOCK NUT 1 1/8”...............................................................
HEX NUT 7/8”....................................................................
LOCK NUT 7/8”..................................................................
BUMPER WASHER 1 1/8”.................................................
LOCK WASHER 1 1/8”.......................................................
LOCK WASHER 7/8”..........................................................
HEX NUT 5/8”....................................................................
LUG NUT ½” (NF)...........................................................
LOCK WASHER 5/8”.........................................................
$85.20
$64.83
$52.68
$39.38
$56.16
$15.51
$16.55
$53.95
$41.33
$42.60
$48.16
$59.96
$38.66
$67.61
$68.99
$79.30
$91.92
$97.24
$110.44
$114.72
$42.95
$137.29
$133.36
$144.12
$153.39
$164.38
$46.65
$74.24
$0.58
$180.01
$3.36
$8.09
$1.62
$4.28
$20.48
$1.27
$1.04
$0.69
$1.50
$0.46
19
Effective:
December 23, 2013
notice.
T-25
T-2531
T-2551
T-2561
T-2571
T-2581
T-259
T-26
T-260
T-2601
T-261
T-2611
T-262
T-2621
T-263
T-2631
T-2635
T-264
T-2641
T-2644
T-2645
T-2646
T-2647
T-2648
T-2649
T-265
T-2650
T-2651
T-2652
T-2661
T-2662
T-2664
T-2665
T-27
T-28
T-29
T-3
T-31
T-32
T-33
T-331
20
LOCKWASHER ½”..........................................................
SCRAPER BAR, 66” X 1” SQUARE...................................
REGULAR SCRAPER BAR 1” X 1” X 23”.........................
HEX NUT ½”....................................................................
REGULAR SCRAPER BAR, 1” X1” X 27”.........................
HEAVY SCRAPER BAR, 1” X 1” X 33”............................
HEAVY SCRAPER BAR, 1” X 1” X 41”.............................
HEAVY SCRAPER BAR, 1” X 1” X 53”.............................
REGULAR SCRAPER BAR, 1” X 1” X 55”........................
REGULAR SCRAPER BLADE...........................................
SCRAPER BAR, 105” X 1” SQUARE.................................
PIN, 1” X 4”........................................................................
HEX BOLT, 1” X 6 ½”, GR. 5.............................................
TRUNNION ELLS FOR OLD STYLE OFFSET.................
TONGUE CLEVIS......................
HEX NUT ¾”....................................................................
HEX NUT 1”.......................................................................
HEX NUT, 1” NF................................................................
SPACER SPOOL 1 1/8” X 9”..............................................
LOCKWASHER, ¾”.........................................................
HEX NUT, 7/8” NF PLATED..............................................
DRAFT PIN, 7/8” CAT. 1....................................................
DRAFT PIN, 1 1/8” WITH NUT AND WASHER...............
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$0.33
$94.81
$75.01
$97.24
$81.96
$100.83
$41.44
$0.69
$43.64
$68.88
$68.07
$62.05
$75.17
$87.86
$83.70
$89.48
$105.11
$58.81
$106.85
$96.31
$112.06
$115.84
$120.97
$125.51
$129.65
$13.34
$133.78
$154.70
$177.06
$9.26
$12.04
$22.34
$128.84
$1.04
$1.97
$2.89
$39.91
$0.81
$3.13
$5.93
$22.34
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
T-333
T-34
T-341
T-342
T-35
T-350
T-39
T-391
T-392
T-393
T-3F
T-4
T-40
T-401
T-41
T-411
T-412
T-4515
T-4516
T-46
T-463
T-465
T-466
T-47
T-48
T-49
T-491
T-492
T-495
T-496
T-497
T-5
T-509
T-510
T-511
T-512
T-513
T-520
T-521
T-522
T-523
Effective:
December 23, 2013
notice.
DRAFT PIN, DUAL 7/8” & 1 1/8” W/ NUT & WASHER...
LOCKWASHER, 1”.............................................................
COTTER PIN, 3/16” X 1 ½”................................................
COTTER PIN, 5/32” X 1 ¼”................................................
LOCKWASHER, 3/8”..........................................................
LOCKING PIN, 7/8” X 4 ½”................................................
STRUT MEMBER 37 1/2”, (TMH) EACH......................................
SQUARE SPACER, ½” THICK...........................................
SQUARE SPACER, 3/8” THICK.........................................
STRUT MEMBER, 32 ¼”....................................................
SPACER SPOOL 1 1/8” X 9” (FAB) (SEE PART# 14905)
BEARING SPOOL 1 1/8” X 9”...........................................
GANG HANGER, FRICTION BEARING 9”......................
GANG HANGER, FRICTION BEARING, 7 ½”SPACING
GANG HANGER, PILLOW BLOCK MOUNT....................
GANG HANGER, TRUNNION BEARING.........................
TRUNNION ELL.................................................................
SEE PART# T-2665
SEE PART# T-2665
END SPACER, 1 1/8” SQ. 7 ½” SPACING.......................
WEAR PLATE, ½” X 9”......................................................
SPIRAL HOSE HOLDER, 23”.............................................
WEAR PLATE ¼” X 9”......................................................
END SPACER, 1 1/8” SQ. 7 ½” SPACING.......................
END SPACER, 1 1/8” SQ. 9” SPACING.............................
END SPACER, 1 1/8” SQ. 9” SPACING.............................
BUMPER WASHER 1 ½”...................................................
END WASHER, 1 ½”..........................................................
END SPACER, 1 ½” SQ., FOR 9” SPACING 3 1/2”..........
DOUBLE WEAR PLATE, ½” X 9”.....................................
WEAR PLATE ½” X 9 ¾”...................................................
BOTTOM CAP....................................................................
ADJUSTING SPRING, 8 ½”...............................................
SPRING HOUSING.............................................................
ADJUSTING SPRING, 4 ½”................................................
LEVELING SCREW............................................................
LEVELING ROD 50”..........................................................
ADJUSTING SCREW, 18”..................................................
ADJUSTING SCREW, 21”..................................................
ADJUSTING SCREW, 25”..................................................
ADJUSTING SCREW, 29”..................................................
$32.18
$1.16
$0.69
$1.08
$0.46
$15.63
$43.64
$2.55
$2.32
$37.04
0
$35.42
$53.48
$43.64
$46.48
$38.66
$19.10
0
0
$15.74
$26.05
$25.62
$17.71
$21.43
$18.06
$24.14
$48.04
$23.86
$53.83
$51.86
$27.09
$22.92
$44.34
$33.69
$36.58
$71.54
$81.84
$79.76
$91.22
$120.62
$141.00
21
Effective:
December 23, 2013
notice.
T-530
T-531
T-532
T-533
T-534
T-56
T-561
T-562
T-563
T-564
T-565
T-566
T-567
T-568
T-569
T-57
T-570
T-571
T-572
T-574
T-5745
T-5746
T-575
T-576
T-577
T-578
T-579
T-58
T-580
T-582
T-583
T-584
T-6
T-60
T-602
T-602R
T-603
T-604IP
T-604RIP
T-605
22
SPINDLE 1 ¾”, ONLY......................................................
SPINDLE ASSEMBLY, 1 ¾”(INC. NUT & WASHERS)..
SEAL, 1 5/8”........................................................................
HUB, ONLY (6 HOLE)........................................................
HUB ASSEMBLY, (INCLUDES 6 LUG BOLTS)...............
BUSHING, 5/8” X 3 1/16”...................................................
BUSHING, 5/8” X 2 1/16”...................................................
LUG BOLT, ½” X 1 ½” NF.................................................
LUG BOLT, ½” X 1” NF.....................................................
SPINDLE ONLY 1 5/8”.......................................................
SPINDLE ASSEMBLY, 1 5/8” (INC. NUTS & WASHER).
HUB ONLY, (FOR 5 BOLT)...............................................
SLOTTED NUT, ¾”............................................................
SLOTTED NUT, 7/8”..........................................................
SET SCREW, 5/8” X 1 1/4”.................................................
WHEEL CARRIAGE BEARING 4”.....................................
SET COLLAR, WITH SCREW...........................................
SPINDLE ASSEMBLY, BOLTED 1 5/8” ..........................
HUB ASSEMBLY, (INCLUDES 5 LUG NUTS)..................
WHEEL BEARING, ¾” (LM11949)..................................
WHEEL CARRIAGE BEARING, 4 ½”................................
WHEEL CARRIAGE BEARING TOP 4 ½”........................
WHEEL BEARING, 1 ¼” (LM67048)...............................
SEAL, 1 ½”, (47S278Z).....................................................
HUB CAP ...........................................................................
HUB CAP............................................................................
WHEEL BEARING, 1 ½” (JL69349)...................................
WHEEL CARRIAGE BEARING TOP 4”............................
SPINDLE WELDMENT, 1 5/8”..........................................
WHEEL BEARING CUP 1 3/8” (LM11910) RACE............
WHEEL BEARING CUP 2” (LM67010) RACE..................
WHEEL BEARING CUP 2” (JL69310) RACE....................
TOP CAP............................................................................
.
PILLOW BLOCK BEARING (W208PPB5).........................
TRUNNION BEARING 1 1/8” SQ. (W208PPB12)..............
REGREASEABLE BEARING (GW208PP17).....................
SPINDLE WASHER, ¾”.....................................................
TRUNION BEARING 1 1/2” SQ. (W211PP3)
REGREASEABLE Bearing 1 ½” SQ. (GW211PP3).
FLATWASHER, 1 ½”.........................................................
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$65.41
$71.54
$8.22
$114.49
$130.46
$3.01
$2.66
$3.24
$2.89
$42.95
$45.96
$103.38
$3.82
$5.09
$3.47
$41.91
$24.31
$81.84
$114.03
$16.21
$55.22
$49.31
$20.72
$6.48
$6.83
$7.52
$23.04
$42.37
$78.72
$17.92
$19.32
$20.86
$26.86
$36.45
$57.88
$62.51
$1.04
$97.24
$97.95
$3.13
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
T-606
T-607
T-610
T-612
T-614
T-62
T-620
T-621
T-623
T-624
T-625
T-626
T-627
T-628
T-63
T-632
T-633
T-635
T-637
T-638
T-640
T-641
T-680
T-681
T-682
T-683L
T-683R
T-684L
T-684R
T-685L
T-685R
T-687
T-688L
T-688R
T-690
T-692
T-694
T-698
T-7
T-7022
FLATWASHER, 1”.............................................................
SPINDLE WASHER 7/8”....................................................
BUSHING, 5/8” X 4 1/16”...................................................
WHEEL RIM, 15” - 5 HOLE...............................................
FLOTATION WHEEL RIM, 15” - 6 HOLE.........................
GANG BEAM (2x3x3/16 - 19”)...........................................
GANG BEAM 2” X 3” X 24”...............................................
GANG BEAM 2” X 3” X 27”...............................................
GANG BEAM 2” X 3” X 33”...............................................
GANG BEAM 2” X 3”X 37”................................................
GANG BEAM 2” X 3” X 40”...............................................
GANG BEAM 2” X 3” X 44”...............................................
GANG BEAM 2” X 3” X 48”...............................................
GANG BEAM 2” X 3” X 55”...............................................
GANG BEAM (3x3x3/16 - 27”)...........................................
GANG BEAM 3” X 3” X 37”...............................................
GANG BEAM 3” X 3” X 40”...............................................
GANG BEAM 3” X 3” X 48”...............................................
GANG BEAM 3” X 3” X 55”...............................................
GANG BEAM 3” X 3” X 65”...............................................
GANG BEAM 3” X 3” X 75”...............................................
GANG BEAM 3” X 3” X 82”...............................................
STRUT MEMBER, 39” EACH............................................
STRUT MEMBER, 38 ¼” EACH......................................
A-FRAME MEMBER, 3” HEAVY DUTY...........................
ANGLE HANGER, (3”X3”) LEFT HAND..........................
ANGLE HANGER, (3”X3”) RIGHT HAND........................
ANGLE HANGER, (3”X4”) 1 1/8” AXLE, LEFT HAND....
ANGLE HANGER, (3”X4”) 1 1/8” AXLE, RIGHT HAND.
ANGLE HANGER, (4”X4”) 1 1/8” AXLE, LEFT HAND....
ANGLE HANGER, (4”X4”) 1 1/8” AXLE, RIGHT HAND.
A-FRAME MEMBER, 3” REGULAR..................................
ANGLE HANGER (4”X4”) 1 ½” AXLE, LEFT HAND......
ANGLE HANGER (4”X4”) 1 ½” AXLE, RIGHT HAND....
A-FRAME MEMBER, 2 ½” EACH.....................................
SCRAPER BAR HOLDER (ANGLE HANGER).................
STRUT MEMBER, 36” EACH (TXH).................................
FLATWASHER, 1 1/8”.......................................................
END WASHER 7/8”............................................................
SLIDE PLATE BOTTOM, ½” X 3”.....................................
Effective:
December 23, 2013
notice.
$1.27
$2.66
$3.36
$107.49
$213.70
$48.27
$55.80
$60.66
$69.92
$76.17
$80.92
$86.82
$93.07
$104.07
$62.86
$81.85
$87.65
$100.81
$122.94
$141.81
$160.56
$173.76
$46.77
$45.73
$57.53
$59.96
$59.96
$73.28
$73.28
$78.60
$78.60
$56.61
$85.90
$85.90
$48.62
$10.88
$43.64
$1.39
$9.49
$13.66
23
Effective:
December 23, 2013
notice.
T-703
T-7033
T-703-5
T-704
T-7040
T-7041
T-7042
T-7043
T-7044
T-705
T-7051
T-7052
T-7053
T-7054
T-7055
T-7056
T-7057
T-7058
T-714
T-715
T-718
T-722
T-723
T-724
T-725
T-727
T-727A
T-728
T-729
T-730
T-731
T-732
T-733
T-734
T-735
T-736
T-737
T-738
24
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
PAIR OF OUTRIGGER ASSY. FOR 0R1, 1 1/8” AXLE, LESS BLADES......
..............................................................
SLIDE PLATE BOTTOM, ½” X 2 ½”.................................
PAIR OF OUTRIGGER ASSY. FOR OR15, 1 ½” AXLE, LESS BLADES.....
...............................................................
SLIDE PLATE TOP, 2” X 3”...............................................
SLIDE PLATE TOP, 3” X 4” TUBE....................................
SLIDE PLATE BOTTOM, ½” X 4”.....................................
SLIDE PLATE TOP, 4” X 4” TUBE, (T4X)........................
SLIDE PLATE TOP, 4” X 4” TUBE, (TWH, TW6 AND FLEX WING)..........
............................................................
SLIDE PLATE BOTTOM, 4” X 4” TUBE, (TWH, TW6 AND FLEX WING)
.............................................................
SLIDE PLATE TOP, 3” X 3”, ½”X 3”.................................
SLIDE PLATE TOP, 2” X 3” SCREW ADJUST.................
SLIDE PLATE TOP 3”X 3” REGULAR SCREW ADJUST
SLIDE PLATE TOP, 3” X 3” HEAVY SCREW ADJUST...
SLIDE PLATE TOP, 3” X 4” SCREW ADJUST.................
SCREW ADJUSTMENT SLIDE PLATE ASSY. 3” X 4”....
SCREW ADJUSTMENT SLIDE PLATE ASSY. 2” X 3”....
SCREW ADJUSTMENT SLIDE PLATE ASSY. 3X3 REG.
SCREW ADJUST SLIDE PLATE ASSY. 3X3 HEAVY....
2 ½” GANG BEAM STRAP (2 X 3 OR 3 X 3 BEAM)
GANG BEAM STRAP, 3” (OBSOLETE, USE T-714)........
ANGLE ADJUSTING PIN, 5/8” X 4 ¾”..............................
SNAP RING, 3 ½”...............................................................
FLATWASHER, ¾”............................................................
HEX BOLT, 5/8” X 4”, GR. 2.............................................
HEX BOLT, 5/8” X 3 ¾”, GR. 5.........................................
HEX NUT, 1 ½”...................................................................
LOCK NUT, 1 1/2”
LOCKWASHER, 1 ½”.........................................................
SNAP RING, 4”...................................................................
ANGLE ADJUSTING PIN, 5/8” X 5 ¾”..............................
CLIP HANGER, (TR7, FRICTION BEARING)...................
HEX BOLT, ½” X 1 ¼”, GR. 2............................................
HEX BOLT, ½” X 1 ½”, GR. 2............................................
HEX BOLT, ½” X 4”, GR. 2................................................
HEX BOLT, ½” X 5 ½”, GR. 2............................................
HEX BOLT, ½” X 6”, GR. 2................................................
HEX BOLT, ½” X 3 ½”, GR. 2............................................
HEX BOLT, ½” X 3”, GR. 2................................................
$147.02
$12.97
$147.02
$27.20
$35.65
$18.41
$36.70
$37.97
$20.72
$29.29
$90.29
$93.54
$108.24
$115.99
$138.10
$102.91
$107.54
$129.54
$11.38
0
$4.40
$1.74
$1.16
$2.08
$2.66
$9.72
$17.71
$3.24
$3.48
$7.52
$32.53
$1.04
$1.04
$1.50
$1.97
$2.08
$1.39
$1.59
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
T-740
T-741
T-742
T-743
T-744
T-745
T-746
T-747
T-748
T-749
T-750
T-751
T-753
T-760
T-761
T-762
T-763
T-768
T-769
T-770
T-771
T-772
T-773
T-774
T-780
T-791
T-792
T-793
T-794
T-8
T-8023
T-8024
T-8026
T-8027
T-8028
T-803
T-8035
T-8036
T-804
T-805
T-806
Effective:
December 23, 2013
notice.
HEX BOLT, 5/8” X 2”, GR. 2..............................................
HEX BOLT, 5/8” X 2 ½”, GR. 2..........................................
HEX BOLT, 5/8” X 3 ½”, GR. 2..........................................
HEX BOLT, 5/8” X 4”, GR. 8..............................................
HEX BOLT, 5/8” X 4 ½”, GR. 2..........................................
HEX BOLT, 5/8” X 5”, GR. 2..............................................
HEX BOLT, 5/8” X 5 ½”, GR. 2..........................................
HEX BOLT, 5/8” X 6”, GR. 2..............................................
HEX BOLT, 5/8” X 6”, GR. 5..............................................
HEX BOLT, 5/8” X 6 ½”, GR. 5.........................................
HEX BOLT, 5/8” X 7”, GR. 5..............................................
HEX BOLT, 5/8” X 7 ½”, GR. 5..........................................
HEX BOLT, 5/8” X 8, GR. 5...............................................
HEX BOLT ¾” X 3 ½” GR. 5..............................................
HEX BOLT ¾” X 6 ½” GR. 5..............................................
HEX BOLT ¾” X 2 ½” GR. 2..............................................
HEX BOLT ¾” X 3” GR. 5..................................................
HEX BOLT 7/8” X 2” GR. 5................................................
HEX BOLT 7/8” X 3” GR. 5................................................
HEX BOLT 7/8” X 3 ½” GR. 5............................................
HEX BOLT 7/8 X 4” GR. 5.................................................
HEX BOLT 7/8” X 5 GR. 5.................................................
HEX BOLT 7/8” X 6 ½” GR5..............................................
HEX BOLT 7/8” X 8 ½” GR. 5............................................
HEX BOLT 1” X 3 ½” GR.5..............................................
GANG BEAM, 3” X 4” X 55”..............................................
GANG BEAM, 3” X 4” X 65”..............................................
GANG BEAM, 3” X 4” X 75”..............................................
GANG BEAM, 3” X 4” X 82”..............................................
BUMPER WASHER 7/8”....................................................
Left Scraper Blade & Arm w/9330 arm (OBSOLETE, see part#11028)
Right Scraper Blade & Arm w/9330 arm (OBSOLETE, see part#11027)
End Washer 7/8” Steel .(OBSOLETE See Part# T-7).........
“A” FRAME MEMBER 2”..................................................
STRUT MEMBER 34”, TE5................................................
SCRAPER BAR CLAMP, “U” CLAMP - 1 HOLE..............
FABRICATED SPACER SPOOL, 7/8” X 7 ½”...................
FABRICATED HALF SPACER, 7/8” X 3” ........................
1/2” X 1 ½” CARRIAGE BOLT, GR. 2...............................
1/2” X 2” CARRIAGE BOLT, GR. 2...................................
SCRAPER BAR HOLDER (BRACKET HGR) 3/8” X 2”....
$1.39
$1.50
$1.97
$4.28
$2.32
$2.43
$2.55
$2.66
$4.28
$4.40
$5.21
$5.56
$5.56
$4.05
$6.95
$3.36
$3.47
$3.70
$4.40
$4.86
$5.79
$6.90
$9.61
$12.73
$6.48
$157.44
$180.01
$202.35
$218.10
$21.30
0
0
0
$34.50
$28.94
$6.83
$23.04
$18.06
$1.04
$1.39
$22.34
25
Effective:
December 23, 2013
notice.
T-807
T-810
T-811
T-812
T-814
T-818
T-819
T-820
T-822
T-829
T-830
T-831
T-832
T-892
T-895
T-9
T-91
T-914
T-916
T-918
T-91F
T-920
T-921
T-922
T-923
T-929
T-933
T-934
T-938
T-940
T-970
TMB
TMB/R
TMBRT602R
TMBT602
TMD
TMD/R
TMDRT604RIP
TMDT604IP
T-OR1
T-OR15
26
1/2” X 2 ½” CARRIAGE BOLT, GR. 2.............................
GANG BEAM, 4” X 4” X 33”..............................................
GANG BEAM, 4” X 4” X 37”..............................................
GANG BEAM, 4” X 4” X 40”..............................................
GANG BEAM, 4” X 4” X 48”..............................................
GANG BEAM, 4” X 4” X 85”..............................................
PIPE SPACER, ¾” X 4 1/8”................................................
PIPE SPACER, ¾” X 5 ¼”..................................................
PIPE SPACER, ½” X 4 1/8”................................................
GANG BEAM, 4” X 4” X 92”..............................................
GANG BEAM, 4” X 4” X 46”..............................................
GANG BEAM, 4” X 4” X 63”..............................................
GANG BEAM, 4” X 4” X 90”.............................................
3/8” X 3” HEX BOLT, GR. 5..............................................
3/8” X 8” HEX BOLT, GR. 2..............................................
GREASE FITTING..............................................................
SPACER SPOOL, 1 1/8” X 7 ½”.......................................
PIN, 7/8” X 4”.....................................................................
PIN, 7/8” X 5”......................................................................
PIN, 7/8” X 6”......................................................................
SPACER SPOOL, 1 1/8” X 7 1/2” OBSOLETE SEE PART # 14906
PIN, 7/8” X 8”......................................................................
PIN, 7/8” X 9”......................................................................
PIN, 7/8” X 9 ½”..................................................................
PIN, 7/8” X 10 ½”................................................................
PIN, 1” X 10 ½”...................................................................
TONGUE JACK ASSEMBLY.............................................
PIN, 1” X 5”........................................................................
PIN, 1” X 8”........................................................................
PIN, 1” X 9 ½”....................................................................
TONGUE SIDE BRACE......................................................
TRUNNION BEARING HOUSING, 1 1/8”.........................
TRUNNION BEARING HOUSING REGREASABLE 1 1/8
Regreasable Housing and W208PPB12 Bearing Assemlbly
Trunion Housing and W208PPB12 Bearing Assemlbly
TRUNNION BEARING HOUSING, 1 ½”.........................
TRUNNION BEARING HOUSING REGREASABLE 1 ½
Regreasable Housing and GW211PP3 BRG Assembly
Trunion Housing and W211PP3 Bearing Assembly
OUTRIGGER WASHER 1 1/8”.......................................
OUTRIGGER WASHER 1 ½”..........................................
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$1.62
$119.70
$130.00
$137.76
$158.36
$253.98
$5.09
$5.90
$4.75
$271.93
$153.27
$197.03
$266.83
$1.16
$1.97
$0.46
$37.97
$6.48
$7.87
$15.35
0
$9.96
$11.23
$11.69
$12.97
$13.20
$97.02
$9.96
$12.97
$14.93
$69.80
$30.10
$34.84
$109.97
$92.61
$55.57
$54.64
$129.65
$113.45
$17.07
$25.47
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
T-OR2
TPB
TPBT60
VP101
VP102
VP111
VP112
VP180
VP201
VP24
VP25
VP251
VP252
VP253
VP254
VP28
VP28T1
VP32
VP32T1
VP35M
VP54
VP750
9004
9006
9011
9027
9034
9042
9048
9049
9056
9072
9073
9089
9095
9104
9106
9149
9160
9175
OUTRIGGER HALF............................................................
PILLOW BLOCK BEARING HOUSING............................
Pillow Block Housing and W208PPB5 Bearing Assembly
RIGHT MOUNTING ANGLE RIGHT SIDE 15”.................
LEFT MOUNTING ANGLE LEFT SIDE 15”......................
LEFT MOUNTING ANGLE RIGHT SIDE 15”..................
RIGHT MOUNTING ANGLE LEFT SIDE 15”...................
TURNBUCKLE ASSEMBLY 12 ½”...................................
HEX BOLT 1” X 4 ½” GR 5................................................
24” SHANK 1 ¼”.................................................................
ROLL PIN 7/16” X 2”..........................................................
HITCH PIN 11 ¾” CAT 2 AND 3, (V-PLOW)....................
LINCH PIN 7/16”................................................................
BUSHING 1 ½” OD X 1 7/8” ..............................................
PARKING STAND 38”........................................................
28” SHANK 1 ¼”.................................................................
28” SHANK 1 ¼”(MADE OF T1 STEEL)...........................
32” SHANK 1 ¼”.................................................................
32” SHANK 1 ¼” (MADE OF T1 STEEL)..........................
REVERSIBLE PLOW POINT, HARD SURFACED............
PARK STAND, 36 ¼”, (V-PLOW)......................................
SEE PART# 10531
ROCKER ARM, and Link Bar DH16...............................
RETAINER STRAP, (TW5, HW, 4W, & TW6)..................
ADJUSTING ROD WELDED..............................................
TONGUE, (TW6).................................................................
TONGUE, (TW5).................................................................
HEAVY DUTY SCRAPER ARM........................................
RIGHT ANGLE HANGER..................................................
LEFT ANGLE HANGER.....................................................
TONGUE, (99 SERIES OFFSET)........................................
DRAW BAR HINGE PIN....................................................
TONGUE PIVOT BOLT.....................................................
TOP GANG BAR CLAMP PLATE......................................
MAIN PIVOT HYDRAULIC HINGE PIN...........................
BOTTOM GANG BAR CLAMP PLATE, LEFT FRONT....
BOTTOM GANG BAR CLAMP PLATE, RIGHT FRONT.
BOTTOM GANG BAR CLAMP PLATE.............................
LEVELING SCREW PAD EYE...........................................
SHANK HOLDER FOR BALK BREAKER 4” BEAM........
Effective:
December 23, 2013
notice.
$36.29
$36.01
$62.63
$81.84
$81.84
$81.84
$81.84
$204.55
$8.68
$457.26
$1.50
$56.26
$1.62
$5.09
$79.18
$485.04
$918.58
$497.78
$945.20
$113.45
$74.78
0
$157.50
$7.69
$69.81
$386.65
$440.82
$48.50
$113.22
$113.22
$974.95
$35.42
$39.24
$32.99
$32.99
$69.11
$69.11
$65.64
$27.67
$48.36
27
Effective:
December 23, 2013
notice.
9187
9192
9195
9209
9211
9219
9220
9221
9222
9223
9224
9225
9226
9237
9238
9239
9258
9261
9264
9269
9270
9282
9283
9312
9314
9318
9330
9333
9346
9347
9348
9350
9351
9354
9356
9364
9389
9390
9398
9401
28
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
SHANK MOUNTING BRACKET FOR BALK BREAKER 4” BEAM 11
3/8” LONG.....................................................
HEX BOLT 5/8” X 2 ½” GR. 5............................................
TONGUE ADJUSTING PIN (63 SERIES) 8 1/4”................
ANGLE HANGER SPACER 7”...........................................
HEX BOLT, 5/8 X 9 1/2”, GR. 5.........................................
SPRING MOUNT TOP PLATE, SF (3” X 4”, 4”X4”).........
SPRING MOUNT ALIGNMENT PLATE (3 X 4, 4 X 4).....
SPRING MOUNT BOTTOM PLATE (3” X 4”, 4” X4”).....
SHOCK FLEX HANGER SHANK 1” X 2” X 11 7/8”.........
HEX BOLT ¾” X 7 ½”........................................................
HEX BOLT ½” X 4 ½” GR. 5 .............................................
FLAT WASHER ½”............................................................
HEX SELF LOCKING FLANGE NUT, ½”.........................
FLOW DIVIDER, 3/8” ........................................................
SWIVEL ELBOW 3/8” MALE NPT X 3/8” JIC FEMALE..
HYDRAULIC CYLINER 3 ½” X 16”.................................
HYDRAULIC CROSS, 3/8” NPT........................................
RIGHT HAND WHEEL CARRIAGE, (99 SERIES)............
WHEEL CARRIAGE MOUNTING PLATE, (63 SERIES)..
SPINDLE 2” X 15”..............................................................
DEPTH CONTROL BAR, (99 SERIES)..............................
LEFT HAND WHEEL CARRIAGE, (99 SERIES)..............
TURNBUCKLE GANG BAR BRACKET............................
LATCH BAIL WELDMENT, (99 SERIES).........................
HYDRAULIC SWIVEL TEE...............................................
HYDRAULIC TEE, 3/8” NPSM..........................................
SCRAPER ARM ½” X 2”....................................................
SCRAPER ARM, DOUBLE BEND.....................................
TRANSPORT LOCK PIN, ¼” X 10 ¼”...............................
CYLINDER ANCHOR PIN, 1” X 8 5/16”...........................
LATCH CYLINDER PIVOT PIN 1” X 11 7/8”....................
LATCH PIVOT PIN 1” X 11 ¾”..........................................
ROLL PIN, 5/16” X 1 ½”.....................................................
FLATWASHER 5/8”...........................................................
SCRAPER BAR CLAMP, U-CLAMP, 2 HOLES................
A-FRAME MEMBER, 3” HEAVY DUTY...........................
TRANSPORT LOCK PIN, (99 & 63 SERIES)....................
DEPTH CONTROL PIN, (99 & 63 SERIES)......................
ADJUSTING TUBE, 51” (TLO-B).......................................
JAM NUT, 1 1/8”................................................................
$68.88
$1.97
$10.88
$9.26
$9.61
$18.29
$17.02
$20.84
$150.84
$7.41
$1.50
$0.81
$1.62
$552.30
$15.40
$457.26
$26.86
$1,150.10
$91.92
$98.17
$155.82
$1,133.78
$28.36
$79.76
$22.34
$26.05
$23.04
$32.18
$10.88
$15.40
$18.64
$18.64
$0.81
$0.81
$10.44
$58.34
$17.02
$12.04
$114.26
$4.75
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
9402
9404
9413
9445
9461
9462
9464
9470
9472
9481
9494
9495
9498
9506
9523
9524
9525
9526
9552
9553
9554
9555
9556
9557
9558
9559
9560
9609
9620
9622
9624
9638
9639
9642
9643
9644
9645
9646
9647
9648
9650
LEVELING ROD SCREW, (TLO).......................................
SPACER, 2”, (TLO).............................................................
GREASE FITTING, ¼” SELF TAPPING............................
ADJUSTING SCREW (FW, HT, 99)...................................
LEFT SCRAPER BLADE & ARM (63 & 99 SERIES)........
RIGHT SCRAPER BLADE & ARM (63 & 99 SERIES)......
ADJUSTING TUBE 19 ¾”, (TW55 & TW51).....................
DEPTH CONTROL BAR, (TW51) ½” X 2 ½” X 28 1/8”....
JAM NUT, 1 ½”, UNC HEX................................................
SPRING MOUNT BOTTOM PLATE..................................
HYDRAULIC HOSE 124”, WITH ENDS............................
HYDRAULIC HOSE 107”, WITH ENDS............................
LEVELING TUBE AND SHAFT, (63 SERIES)..................
SCRAPER BAR MOUNTING BRACKET..........................
OFFSET BEARING SPACER FRONT, 1 1/8”, SF .............
OFFSET BEARING SPACER REAR, 1 1/8, SF..................
HEX BOLT 5/8” X 9” GR. 5................................................
HEX BOLT ¾” X 9” GR.5...................................................
TRUNNION MOUNT ANGLE............................................
SHOCK FLEX HANGER, 1 ¼” X 2” X 10 ¼”...................
TOP SPRING MOUNT PLATE..........................................
ALIGNMENT PLATE.........................................................
HANGER SPACER PAD.....................................................
HEX BOLT 5/8” X 8 ½” GR. 5............................................
HEX BOLT 7/8” X 9” GR. 5...............................................
OFFSET BEARING SPACER, REAR, 10 ½” SPACING....
OFFSET BEARING SPACER, FRONT, 10 ½” SPACING
JAM NUT 1”........................................................................
LEFT HAND WHEEL CARRIAGE , (63 SERIES)..............
RIGHT HAND WHEEL CARRIAGE, (63 SERIES)............
DEPTH & TRANSPORT CONTROL BAR, (63 SERIES)...
FABRICATED HALF SPACER, 7/8” X 3”.........................
BEARING, PILLOW BLOCK 7/8” (W208PPB13)..............
ANGLE ADJUSTING BAR, 15 ¾”......................................
CARRIAGE BOLT ¼” X 1”................................................
GANG BEAM 2” X 2” X 33”...............................................
GANG BEAM 2” X 2” X 37”...............................................
GANG HANGER PILLOW BLOCK, (TG/TGE).................
GANG HANGER, FRICTION BEARING, (TE)..................
GANG HANGER, PILLOW BLOCK, (TE).........................
GANG HANGER, FRICTION BEARING, (TG/TGE).........
Effective:
December 23, 2013
notice.
$56.14
$2.66
$1.50
$81.84
$70.62
$70.62
$102.78
$64.94
$6.95
$29.52
$130.70
$117.73
$203.74
$27.67
$13.20
$17.94
$7.29
$9.96
$39.94
$150.14
$21.76
$15.86
$12.62
$6.48
$13.54
$51.28
$20.03
$5.09
$1,132.62
$1,150.10
$114.49
$15.40
$59.96
$21.07
$0.58
$58.46
$64.71
$65.29
$38.66
$46.65
$46.65
29
Effective:
December 23, 2013
notice.
9651
9652
9653
9654
9656
9658
9659
9661
9663
9664
9665
9666
9667
9668
9669
9670
9671
9672
9673
9674
9675
9676
9677
9678
9679
9683
9684
9685
9688
9689
9690
9691
9698
9735
9736
9737
9859
9860
9869
9870
9871
30
HEX BOLT 5/8” X 3 GR. 2.................................................
STRUT MEMBER, 25 ¾”, (TGE3&4).................................
STRUT SPACER.................................................................
STRUT MEMBER, (TGE-5, TE4) 30”................................
CATEGORY 0 DRAFT PINS W/NUTS & WASHER.........
DRAFT PIN, CATEGORY III.............................................
HEX BOLT ½” X 1’ GR 2...................................................
HEX BOLT 5/8” X 6 ½” GR. 2............................................
HEX BOLT ¾” X 4 1/2” GR. 5...........................................
HEX BOLT ¾” X 5 ½” GR. 2 .............................................
HEX BOLT ¾” X 5 ½” GR. 5..............................................
HEX BOLT ¾” X 6” GR. 5..................................................
HEX BOLT 7/8” X 7 ½” GR. 5............................................
ANGLE ADJUSTING BAR 15”( TGE)................................
HEX BOLT 1” X 5 ½” GR. 5...............................................
HEX BOLT 1” X 8” GR. 5...................................................
HEX BOLT 1 ¼” X 5” GR. 5...............................................
HEX BOLT 1 1/8” X 5 ½” GR. 5.........................................
HEX NUT ¼”.......................................................................
ANGLE ADJUSTING BAR, 22 ½”, (TGE).........................
HEX NUT 1 ¼”....................................................................
LOCKWASHER ¼”.............................................................
LOCKWASHER 1 ¼”..........................................................
HEX BOLT ½” X 2 GR. 2...................................................
FORMED TOP CAP (FOR FAB SPOOL)...........................
FORMED BOTTOM CAP (FOR FAB SPOOL)..................
FABRICATED BEARING SPOOL 7/8” X 7 ½”..................
GANG HANGER, FAB BEARING, (ECOA).......................
TGE SLIDE PLATE TOP....................................................
ANGLE ADJUSTING BAR, 17 ½”, (TGE)..........................
ADJUSTING PIN 5/8” X 3 ½”.............................................
TGE SLIDE PLATE BOTTOM...........................................
TOP ADJUSTING PLATE (TGE/ECO)………………….
STRUT SPACER, 1” (FOR TS & TSF)...............................
STRUT 26 ½”, (TE3)...........................................................
STRUT 28 ½”, (TE4)...........................................................
HEX BOLT ¾” X 4” GR. 5 .................................................
HEX BOLT 7/8” X 2 ½” GR. 5............................................
AXLE 1 ½” X 37 5/8” threaded each end, 4 BLADE, 10 ½” SP.....
AXLE 1 ½” X 48 ¼” threaded each end, 5 BLADE, 10 ½” SP.......
AXLE 1 ½” X 58 ¾” threaded each end, 6 BLADE, 10 ½” SP......
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$1.50
$25.70
$2.66
$28.94
$9.03
$55.57
$0.69
$4.63
$4.28
$5.09
$5.33
$5.67
$11.34
$20.77
$9.96
$15.63
$14.93
$11.92
$0.46
$26.86
$5.33
$0.35
$1.97
$1.04
$13.20
$11.46
$23.50
$29.52
$18.13
$21.85
$6.83
$6.06
$21.88
$3.13
$22.34
$23.50
$4.05
$3.70
$145.51
$163.46
$182.21
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
9872
9873
9874
9875
9876
9877
9879
9880
9881
9882
9883
9884
9885
9886
9887
9889
9892
9894
9925
9955
9957
9958
9959
9961
9962
9965
9966
9967
9968
9969
9973
9979
9981
9982
10001
10012
10014
10015
10038
10039
10040
AXLE 1 ½” X 68 ¾”threaded each end, 7 BLADE 10 ½” SP........
AXLE 1 ½” X 79 5/8” threaded each end, 8 BLADE 10 ½” SP......
LEFT HAND THREADED ROD FOR 12”TURNBUCKLE
RIGHT HAND THREADED ROD FOR 12” T. BUCKLE...
TURNBUCKLE BODY, 24”................................................
TURNBUCKLE ASSEMBLY..............................................
AXLE 1 ½” X 34 1/8” threaded each end , 4 BLADE 9” SP
AXLE 1 ½” X 43 ¼” threaded each end, 5 BLADE 9” SP
AXLE 1 ½” X 51 ¾”threaded each end, 6 BLADE 9” SP..
AXLE 1 ½” X 61 ¾”, threaded each end7 BLADE 9” SP.............
AXLE 1 ½’ X 70 ¾” threaded each end, 8 BLADE 9” SP............
CLEVIS...............................................................................
HEX BOLT ¼” X 4 GR. 2...................................................
HYDRAULIC HOSE CLAMP ASSEMBLY........................
DRAW BAR & LEVELING ARM, (63 SERIES).................
TONGUE, (63 SERIES).......................................................
CYLINDER LATCH WELDMENT, (TW5 & TW6)...........
WHEEL CARRIAGE (TW51), 63”......................................
DEPTH CONTROL BAR, (IMPLEMENT CARRIER)........
CLEVIS PIN........................................................................
HEX BOLT, 7/8” X 2 ½”,GR. 8...........................................
SPINDLE ASSEMBLY, 2 ¾” (IMPLEMENT CARRIER)...
HUB ASSEMBLY, (IMPLEMENT CARRIER)...................
INNER WHEEL BEARING CUP 3.543 OD, JLM506810....
OUTER WHEEL BEARING CUP LM501310.....................
INNER WHEEL BEARING CONE 2.165 OD, JLM506849.
OUTER WHEEL BEARING CONE 1 5/8” LM501349........
SEAL C/R 2 ¼” X 3 ¾”.......................................................
HUB CAP(3.125OD)............................................................
WHEEL RIM, 8 HOLE, 10” WIDE......................................
HEX BOLT 5/8” X 3 GR. 5.................................................
HAIR PIN CLIP...................................................................
DEPTH CONTROL PIN, (IMP. CARRIER)........................
DEPTH CONTROL PIVOT PIN, (IMP. CARRIER)............
CYLINDER, 5” X 12”..........................................................
HEX BOLT, 1” X 2 ½”, GR. 5.............................................
ROLL PIN, 5/16” X 2 ¼”.....................................................
HAIR PIN COTTER, 3/16”..................................................
SPINDLE ASSEMBLY 2 X 15 (#106169L).........................
SEAL, 1 7/8” (#106166).......................................................
INNER WHEEL BEARING CONE, 1 5/8” (LM501349).....
Effective:
December 23, 2013
notice.
$207.33
$235.69
$51.63
$51.63
$135.21
$229.21
$144.58
$160.46
$178.85
$185.80
$214.17
$167.62
$0.81
$7.52
$928.99
$699.21
$55.82
$1,229.75
$344.16
$85.78
$7.06
$198.42
$326.22
$30.45
$23.85
$51.75
$27.90
$12.62
$10.88
$166.81
$2.25
$1.16
$20.72
$25.58
$696.43
$6.42
$1.04
$1.04
$98.40
$8.22
$30.91
31
Effective:
December 23, 2013
notice.
10041
10042
10044
10045
10046
10047
10048
10049
10050
10051
10054
10055
10056
10072
10075
10091
10100
10101
10105
10119
10125
10142
10145
10151
10158
10159
10162
10166
10168
10170
10185
10196
10224
10228
10230
10234
10238
10241
10245
10246
10247
32
-SEE PART NO. T-575........................................................
HUB (#604-2467).................................................................
HUB ASSEMBLY COMPLETE (#106686C).......................
INNER WHEEL BEARING CUP 2 3/8” (LM501310).........
-SEE PART NO. T-583........................................................
-SEE PART NO. T-578........................................................
-SEE PART NO. T-567........................................................
-SEE PART NO. T-603........................................................
COTTER PIN 3/16” X 2 ½”.................................................
OBSOLETE - SEE PART NO. T-105 & T-106....................
SPRING MOUNT TOP PLATE, SHOCK FLEX (4 X 4).....
SPRING MOUNT ALIGNMENT PLATE, SF (4 X 4).........
SPRING MOUNT BOTTOM PLATE, SF (4 X 4)...............
ANGLE HANGER LH 17 DEGREES, 1 1/8” AXLE..........
ANGLE HANGER RH 17 DEGREES, 1 1/8” AXLE..........
HINGE PIVOT BOLT.........................................................
DEPTH CONTROL BAR, LH, (FW, HT)............................
DEPTH CONTROL BAR, RH, (FW, HT)...........................
GANG HANGER (ECO/R)..................................................
GANG BEAM PIVOT CLAMP PLATE..............................
CLEVIS PIVOT PIN...........................................................
REAR LEVELING LINK....................................................
LEVELING PIVOT BAR.....................................................
SCRAPER ARM..................................................................
LEVELING SPRING GUIDE..............................................
LEVELING TUBE...............................................................
FRONT LEVELING PIVOT PIN.........................................
REAR LEVELING LINK PIN..............................................
MAIN LEVELING PIVOT PIN...........................................
TONGUE & DRAW BAR (FW20 SERIES).........................
WING CYLINDER ADJUSTING ANCHOR SCREW........
DRAWBAR HITCH PIN.....................................................
CYLINDER CLEVIS PIN....................................................
CYLINDER PIN WASHER.................................................
CYLINDER BUSHING........................................................
TURNBUCKLE BARREL WELDMENT 12”......................
RIGHT HAND ADJUSTING SCREW 9” (FW)...................
LEFT HAND ADJUSTING SCREW 9” (FW)......................
WING GANG BEAM BOTTOM CLAMP PLATE..............
WING GANG BEAM TOP CLAMP PLATE.......................
MAIN GANG BEAM BOTTOM CLAMP PLATE..............
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
#VALUE!
$119.58
$128.84
$23.04
#VALUE!
#VALUE!
#VALUE!
#VALUE!
$0.81
0
$19.10
$17.60
$21.76
$73.28
$73.28
$29.98
$112.41
$112.41
$27.20
$20.14
$26.28
$65.41
$59.04
$22.80
$140.88
$115.18
$16.21
$16.21
$16.21
$1,061.66
$114.03
$37.04
$21.53
$4.28
$7.06
$104.65
$53.48
$53.48
$70.62
$23.96
$72.58
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
10250
10254
10255
10257
10260
10267
10268
10278
10281
10299
10322
10332
10333
10338
10342
10346
10355
10356
10362
10369
10370
10388
10392
10393
10394
10398
10400
10432
10433
10435
10436
10437
10459
10463
10482
10483
10487
10489
10490
10492
10500
FLEX WING & HT DEPTH CONTROL PIN......................
GANG BEAM TURNBUCKLE CLAMP TOP PLATE........
GANG BEAM TURNBUCKLE CLAMP BTM. PLATE......
WING TURNBUCKLE CLAMP TOP PLATE....................
WING TURNBUCKLE CLAMP BOTTOM PLATE...........
HEX BOLT, ½” X 5”, GR. 5................................................
MAIN WHEEL CARRIAGE (FW20 SERIES).....................
CYLINDER TEE WELDMENT..........................................
CYLINDER TEE & MAIN FRAME BRACE......................
CYLINDER 4” X 24”...........................................................
HEX BOLT, 5/8” X 1 ½”, GR. 5..........................................
1” LOCKNUT......................................................................
ROLL PIN, ¼” X 1 ½”.........................................................
LOWER LATCH BAIL (HW)..............................................
MAIN PIVOT PIN...............................................................
HW-BASIC GANG BEAM 70”...........................................
HW-WING BEAM 50”........................................................
HW-WING BEAM 42”........................................................
UPPER LIFTING BAIL(HW)..............................................
LATCH & CYLINDER PIVOT PIN....................................
LATCH PIVOT PIN.............................................................
BALK BREAKER BRACKET.............................................
SPRING MOUNT BOTTOM PLATE, (42 SERIES-SF)......
SPRING MOUNT TOP PLATE, (42 SERIES-SF)...............
SPRING MOUNT ALIGNMENT PLATE,(42 SERIES-SF).
CYLINDER 4” X 8” REPHASING......................................
CYLINDER 3 ¾” X 8” REPHASING..................................
HYDRAULIC MANIFOLD ADAPTER PLATE WLDMT..
MAIN PIVOT BOLT (3 X 5 BEAM) 10 1/4”.......................
CYLINDER PIVOT LATCH PIN (5 X 3 BEAM) 9 1/8”......
LATCH PIVOT PIN (3 X 5 BEAM) 9 1/8”..........................
CYLINDER FRAME & CYLINDER PIVOT PIN 5 5/8”.....
LOWER CYLINDER LATCH BAIL...................................
CYLINDER LATCH BAIL..................................................
DEPTH CONTROL BAR, TW6..........................................
HEX BOLT, 7/8” X 8”, GR. 5..............................................
MAIN PIVOT BOLT, (4 X 3 BEAM)..................................
LATCH PIVOT PIN, (4 X 3 BEAM)....................................
CYLINDER LATCH BAIL WELDED.................................
LATCH CYLINDER PIVOT PIN (4 X 3 BEAM) 8 1/8”......
ELBOW 90 DEGREES, 3/8” FM - ½” M...........................
Effective:
December 23, 2013
notice.
$22.81
$17.02
$17.02
$18.64
$10.42
$2.32
$1,327.10
$104.65
$115.18
$653.83
$1.39
$5.56
$0.93
$82.42
$39.94
$631.72
$421.03
$390.00
$170.87
$14.70
$13.54
$113.22
$25.24
$25.58
$21.88
$663.67
$645.61
$20.72
$33.92
$15.40
$12.62
$12.62
$75.25
$45.73
$74.78
$12.04
$14.01
$10.88
$79.18
$17.02
$26.05
33
Effective:
December 23, 2013
notice.
10522
10527
10531
10532
10533
10535
10538
10539
10540
10541
10599
10601
10602
10604
10605
10606
10607
10608
10610
10611
10628
10630
10633
10635
10636
10637
10639
10640
10641
10649
10650
10651
10652
10653
10654
10656
10657
10658
10659
10660
10661
34
HYDRAULIC HOSE 3/8” X 94” W/ENDS..........................
ROCKING ARM, LINK BAR-TW5.....................................
TOP CLAMP PLATE ¾” X 10” X 7”..................................
BOTTOM PLATE, 3/8”.......................................................
PIN, 1” X 4”........................................................................
SPACER, ¾” X 1 ¼”...........................................................
GANG BEAM 2” X 2” X 17”...............................................
GANG BEAM 2” X 2” X 20”...............................................
GANG BEAM 2” X 2” X 25”...............................................
GANG BEAM 2” X 2” X 28”...............................................
SHANK HOLDER FOR BALK BREAKER 3” BEAM........
SHANK MTG. BRACKET-BALK BREAKER 3” BEAM...
BALK BREAKER SHANK.................................................
ROLL PIN 5/16” X 3”..........................................................
TOP ADJUSTING PLATE, (THE)......................................
BOTTOM ADJUSTING PLATE, (THE)..............................
ADJUSTING BAR FRONT, 18” (THE)...............................
ADJUSTING BAR REAR, 20” (THE).................................
HYDRAULIC CYLINDER, 4” BORE X 8” STROKE ........
HYDRAULIC CYLINDER, 2 ½” X 12”..............................
WHEEL CARRIAGE, 45” (TW55)......................................
STRUT MEMBER, 26 5/8”, (TE3)......................................
SLOTTED NUT, 1” UNF....................................................
SPRING MOUNT TOP PLATE, SHOCK FLEX (3 X 5)....
OFFSET BEARING SPACER FOR SF................................
OFFSET BEARING SPACER, 3”........................................
HEX BOLT, 7/8” X 7”, GR. 5..............................................
TOP MAST, SOIL BREAKER ...........................................
RIGHT HAND FRONT MOUNTING ANGLE BRACKET.
LEFT HAND FRONT MOUNTING ANGLE BRACKET...
REAR TOP MOUNTING PLATE (PS)................................
FRONT TOP MOUNTING PLATE (PS).............................
GAUGE WHEEL & SPINDLE ARM...................................
SHANK 32 X 1 ½” (PARABOLIC SUBSOILER)................
BUSHING, (SOIL BREAKER)...........................................
RIGHT HAND REAR MOUNTING ANGLE BRACKET...
LEFT HAND REAR MOUNTING ANGLE BRACKET......
ROLL PIN ½” X 2 ½”..........................................................
REVERSIBLE POINT, HARD SURFACED........................
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$106.73
$156.91
$55.80
$42.02
$9.61
$2.32
$27.23
$29.61
$33.25
$35.19
$66.48
$83.53
$56.93
$1.16
$29.52
$11.92
$22.45
$23.28
$343.81
$309.90
$1,292.72
$26.28
$6.95
$23.04
$19.80
$25.58
$16.55
$61.70
$10.42
$445.69
$272.04
$272.04
$15.74
$76.75
$362.92
$975.00
$4.05
$272.04
$272.04
$1.62
$131.16
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
10663
10664
10665
10666
10667
10668
10670
10671
10677S
10684
10685
10686
10687
10697
10699
10701
10702
10703
10704
10705
10706
10711
10722
10724
10725
10727
10729
10731
10738
10739
10745
10746
10748
10754
10760
10777
10780
10782
10784
Effective:
December 23, 2013
notice.
WHEEL CARRIAGE-(TW61) 68”.......................................
WHEEL CARRIAGE-(TW64) 108”.....................................
WHEEL CARRIAGE-(TW65) 123 3/4”...............................
TONGUE, (TW5) - 15 FT...................................................
REAR GANG LATERAL TURNBUCKLE BOTTOM PLT.
REAR GANG LATERAL SHIFT TURNBUCKLE TOP PL
SCARIFIER SHANK WITH POINT....................................
HITCH PIN 7/8” X 8”..........................................................
SHANK KEY & CHAIN......................................................
SHANK KEY ONLY...........................................................
SHANK KEY CHAIN ONLY..............................................
SCARIFIER POINT ONLY.................................................
5/8” X 1 3/4” PLOW BOLT...................................................
CUTTING EDGE ½ X 6 X 48”............................................
CUTTING EDGE ½ X 6 X 60”............................................
CUTTING EDGE ½ X 6 X 66”............................................
CUTTING EDGE ½ X 6 X 72”............................................
CUTTING EDGE ½ X 6 X 84”............................................
CUTTING EDGE ½ X 6 X 96”............................................
CLEVIS PIN, (99 SERIES, FW)..........................................
ROLL PIN 5/16” X 2 ½”......................................................
MAIN FRAME GANG BEAM BOTTOM CLAMP.............
MAIN FRAME GANG BEAM TOP CLAMP PLATE.........
WING GANG BEAM CLAMP............................................
REAR GANG BEAM PIVOT CLAMP PLATE...................
FRONT GANG BEAM PIVOT CLAMP PLATE.................
LEFT HAND ANGLE HANGER, 22 DEGREES, 1 1/2” AXLE, 5 X 7
GANG BEAM................................................
RIGHT HAND ANGLE HANGER, 22 DEGREES, 1 1/2” AXLE, 5 X 7
GANG BEAM................................................
CUTTING EDGE ½ X 6 X 36”............................................
CUTTING EDGE ½ X 6 X 42”............................................
CLEVIS EYE HITCH..........................................................
TONGUE & DRAW BAR (FW10).......................................
HEX BOLT, ¾” X 7 ½”, GR. 5............................................
RIGHT HAND DEPTH CONTROL BRACKET (FW10).....
CLEVIS PIVOT PIN............................................................
REAR LEVELING LINK.....................................................
$1,114.10
$1,220.60
$1,333.58
$1,433.60
$1,580.97
$463.74
$24.31
$13.66
$49.31
$12.62
$10.88
$6.02
$5.56
$13.94
$1.74
$81.61
$105.05
$115.52
$125.77
$146.70
$167.71
$17.02
$1.04
$58.34
$20.14
$83.92
$32.18
$21.88
$80.11
$80.11
$61.24
$71.54
$133.71
$902.48
$8.22
$97.59
$26.86
$26.28
$82.89
35
Effective:
December 23, 2013
notice.
10792
10797
10802
10808
10823
10825
10856
10861
10868
10870
10882
10912
10927
10934
10935
10936
10937
10938
10939
10940
10941
10942
10943
10945
10946
10947
10978
10983
10985
10986
10990
11007
11008
11018
11019
11021
11025
11027
11028
36
GANG BEAM PIVOT CLAMP PLATE...............................
GANG BEAM CLAMP BOTTOM REAR, (63 SERIES).....
HITCH PIN, CATEGORY II & III.......................................
CLEVIS EYE HITCH..........................................................
CLEVIS PIVOT PIN............................................................
HITCH PIN, CATEGORY, I & II, 8 1/8”.............................
LEVELING TUBE...............................................................
REAR LEVELING LINK.....................................................
WING FRAME TURNBUCKLE CLAMP TOP PLATE......
GANG BEAM ALIGNER BAR...........................................
GANG BEAM BOTTOM CLAMP PLATE.........................
HITCH LOCK PIVOT PIN, (IMPLEMENT CARRIER)......
15/16” X 1 ¼” SPECIAL END SPACER USED ON 3-BLADE FRONT
GANG ONLY (TGE-BF).........................
15/16” X 4 7/8” SPECIAL END SPACER USED ON 3-BLADE FRONT
GANG ONLY (TGE-BF)..........................
15/16” X 3 CONVEX END SPACER..................................
15/16” X 3 CONCAVE END SPACER................................
FLANGETTE-3 HOLE........................................................
BEARING (205PPB7)..........................................................
SPACER SPOOL 15/16” X 7 1/2”.......................................
AXLE, 15/16” X 17 1/8” RD. (3 BLADE, 7 1/2” SP)..........
AXLE, 15/16” X 24 3/4” RD. (4 BLADE, 7 1/2” SP)..........
AXLE, 15/16” X 32 3/8” RD. (5 BLADE, 7 1/2” SP)..........
HEX BOLT, 5/16” X 3/4”, GR. 2........................................
HEX NUT, 5/16”.................................................................
LOCKWASHER, 5/16”.......................................................
15/16” END WASHER........................................................
RENOVATOR SHANK W/HARD SURFACED POINT.....
RENOVATOR HARD SURFACED POINT ONLY.............
STRUT MEMBER(PR-3), 17 1/2”.......................................
PARKING STAND, (PR) - 17 ¾”.......................................
FLANGETTE GANG HANGER, (TGE)..............................
FLANGETTE GANG HANGER, (TE).................................
LEVELING SPRING GUIDE, (63 & 99 SERIES)................
LEVELING TUBE & BAR WELDMENT, (99 SERIES).....
LEVELING TUBE, (63 SERIES).........................................
CYLINDER LATCH, (63 SERIES)......................................
RIGHT SCRAPER BLADE & ARM ASSEMBLY..............
LEFT SCRAPER BLADE & ARM ASSEMBLY.................
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$31.02
$123.52
$40.98
$163.80
$40.98
$35.31
$39.94
$70.27
$76.06
$20.03
$40.63
$147.02
$5.90
$13.08
$17.71
$15.40
$15.40
$4.05
$22.81
$23.04
$50.36
$58.00
$61.24
$0.58
$0.58
$0.46
$8.80
$46.65
$13.20
$33.34
$30.45
$37.74
$46.65
$114.49
$263.82
$222.96
$82.42
$43.73
$43.73
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
11029
11030
11031
11032
11033
11034
11037
11038
11039
11056
11057
11065
11066
11067
11081
11082
11084
11085
11086
11114
11116
11138
11139
11144
11145
11147
11148
11149
11150
11151
11161
11164
11165
11166
11167
11169
11170
11173
11174
11178
Effective:
December 23, 2013
notice.
TOP PLATE 5/8” X 8” X 10”..............................................
LH SHANK MOUNTING ANGLE, 5/8”X4”X4”X 11 ½”....
RH SHANK MOUNTING ANGLE, 5/8”X4”X4”X 11 ½”...
SHANK MOUNTING BOLT ¾” X 8”, GR.5.......................
PARKING STAND 2” X 2” X 31 ¾”...................................
PIN ¾” X 3 1/2” USEABLE LENGTH.........................................
PARKING STAND 1 ½” X 1 ½” X 31 ¾”...........................
SEE PART# 9690
A-FRAME FOR PR-3..........................................................
SCRAPER BAR MOUNT BRACKET (5X7 GB) (63 & 99)
SCRAPER MOUNTING TOP CLAMP PLATE (5X7)........
OUTRIGGER SCRAPER BLADE.......................................
SCRAPER BAR MOUNTING BRACKET..........................
SCRAPER ARM..................................................................
UNIVERSAL SCRAPER BLADE........................................
HEX BOLT ½” X 2 ½”, GR. 2.............................................
RIGHT SCRAPER BLADE & ARM ASSY (HT SERIES)..
LEFT SCRAPER BLADE & ARM ASSY (HT SERIES).....
OUTRIGGER BLADE RETAINER WASHER....................
WING WHEEL CARRIAGE 16” LEFT (FW20 SERIES)....
WING WHEEL CARRIAGE 16” RIGHT (FW20 SERIES).
U-BOLT ½” FOR (2X2) TUBING.......................................
U-BOLT 5/8” FOR (3X3) TUBING.....................................
GANG BEAM, 3/16” X 3” X 3” X 46”, (TLO)....................
GANG BEAM, 3/16” X 3” X 3” X 54”, (TLO)....................
GANG BEAM, 3/16” X 3” X 3” X 65”, (TLO)....................
GANG BEAM, 3/16” X 3” X 3” X 74”, (TLO)....................
GANG BEAM, 3/16” X 3” X 3” X 83”, (TLO)....................
GANG BEAM, 3/16” X 3” X 3” X 92”, (TLO)....................
GANG BEAM, 3/16” X 3” X 3” X 101”, (TLO)...................
A-FRAME HITCH PIN BUSHING......................................
REAR TOP MOUNTING PLATE 5/8” X 2 ½” X 5 ½”.......
LH SHANK MOUNTING ANGLE 4”X4”X 5/8” X 24”......
RH SHANK MOUNTING ANGLE 4”X4”X 5/8” X 24”......
PIN, CATEGORY II, 1 1/8” X 5” SP...................................
2” X 2” X ½” SPECIAL WASHER (ROUND HOLE)........
GANG AXLE SPECIAL WASHER FOR 1 1/8” SQ. AXLE, 4” ROUND.......
........................................................
RH ANGLE HANGER 6 X 4 X 1 ½” AXLE........................
LH ANGLE HANGER 6 X 4 X 1 ½” AXLE........................
FURROW WHEEL SPINDLE, (DISC PLOW)....................
$48.74
$67.61
$67.61
$8.80
$69.80
$8.22
$35.89
0
$32.18
$42.37
$21.88
$29.55
$42.60
$46.77
$20.00
$1.16
$65.41
$65.41
$3.13
$530.89
$530.89
$5.09
$7.87
$127.34
$142.50
$163.23
$180.36
$197.03
$214.39
$231.53
$12.62
$10.88
$100.60
$100.60
$16.55
$3.82
$11.81
$76.29
$76.29
$75.25
37
Effective:
December 23, 2013
notice.
11179
11183
11187
11196
11200
11205
11207
11209
11213
11218
11227
11233
11234
11236
11237
11299
11305
11306
11308
11310
11312
11313
11314
11315
11316
11317
11318
11319
11320
11321
11322
11323
11324
11325
11326
11327
11328
11329
11330
11331
11332
38
FURROW WHEEL SPINDLE ARM, (DISC PLOW)..........
PIPE SPACER, ¾” X 6 1/8”................................................
DISC SPINDLE WELDMENT, (DISC PLOW II)...............
NUT, WASHER - (DISC PLOW)........................................
ADJUSTING SCREW - (DISC PLOW)..............................
ADJUSTING TUBE - (DISC PLOW, 2 BLADE).................
ADJUSTING TUBE - (DISC PLOW, 1 BLADE).................
SCRAPER ARM..................................................................
PARK STAND, 29” (DISC PLOW & ROW DISC).............
SPINDLE 1” X 8 ¼” (TDP-GW)..........................................
BLADE RETAINER NUT...................................................
FRONT SCRAPER SPACER BRACKET, (TDP2)..............
REAR SCRAPER BRACKET, (DISC PLOW)....................
REAR SCRAPER SPACER BRACKET, (TDP2)................
SCRAPER ARM, (TDP2)....................................................
GAUGE WHEEL ARM & SPINDLE WELDMENT, TDP.
GREASE CAP SHIELD.......................................................
GAUGE WHEEL CLAMP CHANNEL................................
GAUGE WHEEL DOUBLE CLAMP WASHER..................
SCRAPER ARM, (TDP1)....................................................
WHEEL CARRIAGE ARM-RIGHT, (38 & 42 SERIES).....
WHEEL CARRIAGE ARM-LEFT, (38 & 42 SERIES).......
WHEEL CARRIAGE 54 ½” - (38 SERIES).........................
WHEEL CARRIAGE 58 ½” - (42 SERIES).........................
AXLE 7/8” X 17 3/8” SQ. (3 BLADE, 7 ½” SPACING)......
AXLE 7/8” X 25” SQ. (4 BLADE, 7 ½” SPACING)............
AXLE 7/8” X 32 5/8” SQ. (5 BLADE, 7 ½” SPACING)......
AXLE 1 1/8” X 27 ½” threaded each end (4 BLADE 7 ½” SPC)....
AXLE 1 1/8” X 35 3/8”threaded each end (5 BLADE 7 ½” SPC)..
AXLE 1 1/8” X 42 ¾” threaded each end (6 BLADE 7 ½” SPC)....
AXLE 1 1/8” X 50 ½”threaded each end (7 BLADE 7 ½” SPC)....
AXLE 1 1/8” X 58 1/8” threaded each end (8 BLADE 7 ½” SPC)..
AXLE 1 1/8” X 65 5/8” threaded each end (9 BLADE 7 ½” SPC)..
AXLE 1 1/8” X 72 ½” threaded each end (10 BLADE 7 ½” SPC)...
AXLE 1 1/8” X 23 ½”threaded each end (3 BLADE 9” SPC)........
AXLE 1 1/8” X 32” threaded each end(4 BLADE 9” SPC)............
AXLE 1 1/8” X 41 ¼” threaded each end (5 BLADE 9” SPC)........
AXLE 1 1/8” X 50 ¼” threaded each end (6 BLADE 9” SPC)........
AXLE 1 1/8” X 59 3/8” threaded each end (7 BLADE 9” SPC)......
AXLE 1 1/8” X 68 5/8” threaded each end (8 BLADE 9” SPC)......
AXLE 1 1/8” X 77 5/8”threaded each end (9 BLADE 9” SPC)......
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$57.65
$5.09
$177.00
$23.73
$42.14
$75.25
$69.11
$19.80
$33.34
$41.56
$12.62
$20.72
$19.10
$19.10
$21.07
$127.57
$13.20
$13.08
$7.52
$18.17
$415.93
$415.93
$527.53
$539.92
$49.31
$57.30
$63.90
$88.56
$96.89
$105.00
$112.41
$119.58
$127.11
$132.78
$86.94
$95.16
$104.07
$112.29
$120.86
$129.31
$137.53
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
11339
11340
11373
11374
11375
11376
11378
11379
11380
11381
11382
11384
11385
11387
11389
11390
11392
11397
11398
11408
11421
11427
11429
11443
11450
11451
11452
11453
11454
11455
11456
11457
11458
11461
11463
11464
11465
11466
11467
11468
11469
Effective:
December 23, 2013
notice.
AXLE 1 ½” X 90 ¼”, threaded each end(9 BLADE 10 ½” SPC)...........
AXLE 1 ½” X 100 ¾”, threaded each end(10 BLADE 10 ½” SPC)........
MAST WELDMENT, (TXXH)............................................
CLAMP PLATE...................................................................
HEX BOLT, 7/8” X 5 ½”, GR.5...........................................
STRUT, 85 ¼”.....................................................................
DRAW BAR 34”, (38 SERIES)............................................
DRAW BAR 38”, (42 SERIES)............................................
TONGUE FOR 38 & 42 SERIES OFFSET..........................
ROLL PIN, 5/16” X 2”.........................................................
ROLL PIN, 7/16” X 2 1/2”...................................................
GANG BEAM BOTTOM CLAMP PLATE, (38 SERIES)...
GANG BEAM TOP CLAMP PLATE..................................
GANG BEAM TOP CLAMP PLATE W/ STUD (38)..........
GANG BEAM BOTTOM CLAMP PLATE-(42 SERIES)...
GANG BEAM TOP CLAMP PLATE - (42 SERIES)...........
GANG BEAM TOP CLAMP W/STUD -(42 SERIES).........
SQUARE NUT, 1 ½”...........................................................
SQUARE NUT 1 1/8”..........................................................
HINGE PIVOT BOLT.........................................................
SLIDE PLATE BOTTOM....................................................
WHEEL CARRIAGE 97”, (TW52, 4W)...............................
WHEEL CARRIAGE 111”, (TW53)....................................
SET SCREW 5/8” X 1 ½” SQ. HEAD.................................
SEE PART# 12907
SEE PART# 12896
REAR ADJUSTING BAR, 15”-(TMEA)..............................
ADJUSTING BAR, 16” - (TMEB, TMEA)..........................
FRONT ADJUSTING BAR 20 ½”.......................................
MAST WELDMENT (HL)...................................................
CLAMP PLATE...................................................................
STRUT, 41 ¼” (HEAVY) - (HL)..........................................
STRUT, 39 ¼” (LIGHT) - (HL)...........................................
HITCH PIN, (HL)................................................................
HEX BOLT, 9/16” X 2” NF.................................................
BLADE RETAINER NUT ASSEMBLY..............................
HUB CAP, 2.720 OD...........................................................
DUAL SEAL BEARING CONE, 1 ½” BORE LM29700LA.
BEARING CUP, 2.562 LM29710........................................
BEARING CONE, 1 ½” ID LM29749.................................
RIGHT ADJUSTING SCREW 12”......................................
$251.44
$292.42
$198.30
$11.69
$7.64
$113.56
$532.51
$555.43
$353.19
$0.81
$1.50
$92.73
$39.71
$45.96
$80.34
$42.37
$48.39
$39.46
$34.50
$54.06
$18.13
$1,217.36
$1,319.00
$4.86
0
0
$20.61
$21.07
$23.04
$210.69
$11.82
$52.32
$46.77
$15.63
$2.08
$14.01
$5.56
$31.72
$13.66
$13.66
$64.94
39
Effective:
December 23, 2013
notice.
11470
11473
11474
11478
11479
11480
11481
11482
11493
11494
11495
11496
11497
11498
11500
11502
11505
11506
11507
11508
11525
11533
11534
11535
11536
11538
11539
11540
11550
11559
11560
11561
11562
11563
11564
11565
11572
11573
11577
11579
11594
40
LEFT ADJUSTING SCREW 12”.........................................
HITCH PIN, CATEGORY II (TB).......................................
HITCH PIN, CATEGORY III..............................................
FAB SPACER SPOOL 1 1/8” X 7 ½”..OBSOLETE SEE PART# 14906
FLANGETTE, 1 1/8” BF.....................................................
BALL FLANGETTE GANG HANGER...............................
FRICTION HANGER 7 ½” SPACING................................
FRICTION HANGER 9” SPACING....................................
GANG BEAM 5 X 3 X 56”, (HL SERIES)...........................
GANG BEAM 3 X 3 X 24”..................................................
FAB SPACER SPOOL, 1 1/8” X 9”(OBSOLETE SEE PART# 14905)
GANG BEAM 5 X 3 X 55”, (HL SERIES)..........................
GANG BEAM 2 X 3 X 31” (FRONT, TME)........................
AXLE 1 1/8” X 49 ¼” SQ. 4 BLADE(COULTER KIT).......
AXLE 1 1/8” X 64 ½” SQ. 5 BLADE(COULTER KIT).......
AXLE 1 1/8” X 12 ½”, 2 BLADE(ROW DISC)...................
GANG HANGER RH(ROW DISC) (2 ½” SQ.)....................
TRUNNION ELL RH(ROW DISC).....................................
HEX BOLT, ¾” X 5”, GR. 5...............................................
GANG BEAM 3 X 4 X 80”..................................................
GANG BEAM 3 X 4 X 90”..................................................
GANG BEAM 3 X 4 X 85”..................................................
GANG BEAM 3 X 4 X 95”..................................................
TILT PIN, (GB3).................................................................
TILT PIN,(GB2)..................................................................
PARKING STAND 19”,(GB2).............................................
ANGLE & SWING PIN, 1 ¼” X 5”,(GB3)...........................
WING LOCK PIN...............................................................
HYDRAULIC TEE CLAMP ELL........................................
GANG BEAM 3 X 3 X 19”..................................................
END PLATE 4” X 4”, (38 SERIES OFFSET)......................
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$64.94
$17.36
$28.01
0
$5.33
$46.77
$42.60
$51.98
$217.63
$125.95
$168.55
$165.42
$198.07
$184.87
$139.15
$175.26
$45.56
0
$214.39
$250.28
$66.79
$97.24
$110.78
$123.87
$141.81
$32.53
$43.99
$13.54
$4.86
$213.47
$235.81
$224.70
$247.04
$35.89
$35.08
$40.63
$37.04
$11.69
$9.26
$54.76
$10.88
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
11595
11596
11600
11601
11603
11604
11605
11606
11607
11608
11609
11610
11611
11612
11613
11614
11615
11656
11657
11658
11659
11685
11686
11687
11688
11689
11690
11691
11692
11693
11694
11695
11696
11712
11713
11714
11715
11716
11728
11729
11730
END PLATE 6” X 4”, (42 SERIES OFFSET)......................
LEVELING ROD SCREW, (38 & 42 SERIES OFFSET).....
RIGHT HAND THREADED ROD, 9” TURNBUCKLE......
LEFT HAND THREADED ROD, 9” TURNBUCKLE.........
GANG BEAM 5 X 3 X 74”, (OFFSET)................................
GANG BEAM 5 X 3 X 105”, (OFFSET)..............................
HEAVY SCRAPER BAR 74”..............................................
HEAVY SCRAPER BAR 95”..............................................
HEAVY SCRAPER BAR 116”............................................
HEAVY SCRAPER BAR, 158”...........................................
GANG BEAM 5 X 3 X 72”..................................................
GANG BEAM 5 X 3 X 117”................................................
GANG BEAM 5 X 3 X 135”................................................
GANG BEAM 5 X 3 X 153”................................................
GANG BEAM 6 X 4 X 63”..................................................
GANG BEAM 6 X 4 X 72”..................................................
GANG BEAM 6 X 4 X 81”..................................................
GANG BEAM 6 X 4 X 90”..................................................
GANG BEAM 6 X 4 X 99”..................................................
GANG BEAM 6 X 4 X 117”................................................
GANG BEAM 6 X 4 X 135”................................................
HEAVY SCRAPER BAR, 72”.............................................
SEE PART# T-1
STRUT, 32 ½”.....................................................................
Effective:
December 23, 2013
notice.
$14.01
$112.41
$61.70
$61.70
$264.86
$297.74
$333.51
$366.16
$402.27
$470.81
$341.27
$384.22
$431.79
$474.63
$521.86
$612.15
$702.56
$101.64
$119.70
$137.76
$155.82
$174.57
$275.51
$405.52
$464.44
$524.29
$294.15
$332.70
$371.48
$410.03
$448.81
$526.02
$603.82
$104.65
$138.68
$154.08
$169.71
0
$35.42
$77.62
$84.51
41
Effective:
December 23, 2013
notice.
11731
11732
11737
11738
11739
11741
11743
11744
11750
11752
11753
11754
11755
11757
11758
11759
11760
11761
11762
11763
11774
11775
11816
11825
11895
11896
11898
11899
11902
11918
11922
11923
11924
11925
42
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
FURROW WHEEL,( DISC PLOW).....................................
CYLINDER 3 X 8................................................................
TUBE HANGER FOR 3 X 5, 1 1/8” AXLE.........................
ADJUSTING TUBE, 42 7/8”...............................................
RH GAUGE WHEEL & SPINDLE WELDMENT, REG. 1 5/8”,(V-PLOW 3
SHANK)...................................................
RH GAUGE WHEEL & SPINDLE WELDMENT, FLOTATION, 1 ¾”,(VPLOW 3 SHANK)..........................
RH GAUGE WHEEL & SPINDLE WELDMENT, REG. 1 5/8”,(V-PLOW 5,
7, 9 & 11 SHANK)..................................
RH GAUGE WHEEL & SPINDLE WELDMENT, FLOTATION, 1 ¾”(VPLOW 5, 7, 9, & 11 SHANK)..........
LH GAUGE WHEEL & SPINDLE WELDMENT, REG. 1 5/8”( V-PLOW 3
SHANK)...................................................
LH GAUGE WHEEL & SPINDLE WELDMENT, FLOTATION, 1 ¾” ,(VPLOW 3 SHANK)........................
LH GAUGE WHEEL & SPINDLE WELDMENT, REG. 1 5/8”,(V-PLOW 5,
7, 9 & 11 SHANK)..................................
LH GAUGE WHEEL & SPINDLE WELDMENT, FLOTATION, 1 ¾”,(VPLOW, 5, 7, 9 & 11 SHANK).........
SPRING MOUNT TOP PLATE, SHOCK FLEX (3 X 5).....
CYLINDER PIN, 1” X 12 ½”...............................................
SPACER 1”, SCH. 40 X 3 ¾”..............................................
RETAINER STUD 7/8” X 14”.............................................
CATEGORY 3 HITCH PIN (TXXH)...................................
BOTTOM CLAMP PATE, ( 38 SERIES).............................
GANG BEAM SHIFT BRACKET (38 SERIES)..................
BOTTOM CLAMP PLATE, (42 SERIES)...........................
GANG BEAM SHIFT BRACKET, (42 SERIES).................
RIGHT ADJUSTING SCREW LEFT HAND FRONT (63)..
PARKING STAND 37 ¼”(PARABOLIC SUBSOILER)......
HEX BOLT, ¾” X 3 ½”, GR. 2............................................
LEVELING & PRESSURE CONTROL GUIDE BAR.........
LEVELING TUBE WELDMENT........................................
ROLL PIN WASHER..........................................................
$118.65
$127.91
$64.71
$74.33
$80.99
$110.78
$291.90
$128.96
$97.59
$153.39
$180.36
$168.90
$171.44
$153.39
$180.36
$168.90
$171.44
$20.72
$18.64
$22.81
$13.54
$5.90
$34.50
$70.50
$13.20
$20.72
$14.01
$22.46
$98.17
$69.46
$3.70
$119.12
$81.27
$1.97
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
11935
11944
11946
11947
11948
11949
11950
11951
11971
11972
11973
11974
11975
11977
11978
11979
11980
11981
11983
11984
11985
11986
11987
11991
12021
12026
12028
12029
12030
12034
12041
12047
12048
12049
12051
12055
12077
12089
Effective:
December 23, 2013
notice.
FURROW WHEEL ARM....................................................
PIN, 1” X 6 ½”.....................................................................
RH GAUGE WHEEL MOUNTING BRACKET TOP..........
LH GAUGE WHEEL MOUNTING BRACKET TOP..........
RH GAUGE WHEEL MOUNTING BRACKET BOTTOM.
LH GAUGE WHEEL MOUNTING BRACKET BOTTOM.
GAUGE WHEEL TOP CLAMP PLATE..............................
GAUGE WHEEL ARM & SPINDLE WELDMENT............
3/4” U-BOLT FOR 4 X 4 TUBING......................................
1 1/8” U-BOLT FOR 5 X 7 TUBING...................................
1” U-BOLT FOR 5 X 7 TUBING.........................................
WHEEL & TIRE ASSEMBLY.............................................
HUB (4 BOLT), 2 7/16” PILOT...........................................
LUG BOLTS ½” UNF X 1”, 60 DEGREES.........................
SEAL 1 15/16” OD X 1 ¼” ID.............................................
BEARING 1” TAPER ROLLER, L44543............................
FALT WASHER 13/16” ID X 1 7/16” OD...........................
BEARING CUP, L44610......................................................
HUB CAP, 2” OD................................................................
COTTER PIN 1/8” X 1 ½”...................................................
HOSE END 3/8” (PARKER 10143-6-6)...............................
ADJUSTING TUBE, 26 1/4” (TW52,TW53,4W).................
GANG HANGER-(TUBULAR) FOR 4 X 3 BEAM.............
SLIDE PLATE (TOP) 3 X 4................................................
1” U-BOLT FOR 6 X 4 TUBING.........................................
GANG ADJUSTING LEVER,(TW55, TW51).....................
GANG ADJUSTING BAR, 13”, 6 HOLE (LO40)...............
GANG ANGLE ADJUSTING KIT,(TW55).........................
GANG ANGLE ADJUSTING KIT,(TW51).........................
GANG ANGLE ADJUSTING KIT,(TW52, 4W)..................
GANG ADJUSTING KIT, (TW53)......................................
SLIDE PLATE TOP FOR 3 X 3 GB (NEW GANG ADJUSTMENT) (TW55,
TW51)..........................................
HYDRAULIC FLOW RESTRICTOR 3/32” ORIFICE, 3/8 MNPT X 3/8
FNPT (SWIVEL)............................................
HYDRAULIC FLOW RESTRICTOR 1 1/16” ORIFICE, 3/8” MNPT X 3/8
FNPT (SWIVEL)....................................
$68.65
$11.69
$64.94
$64.94
$114.03
$114.03
$49.66
$122.71
$14.70
$14.01
$29.64
$23.96
$23.73
$126.32
$127.27
$3.13
$6.59
$21.01
$1.74
$8.22
$7.47
$1.21
$9.96
$120.62
$129.08
$50.63
$7.52
$16.87
$37.28
$29.70
$20.84
$45.73
$50.13
$50.36
$56.26
$28.94
$20.72
$20.72
43
Effective:
December 23, 2013
notice.
12090
12091
12094
12102
12104
12132
12135
12159
12160
12163
12164
12165
12166
12175
12176
12177
12178
12179
12180
12181
12182
12183
12184
12188
12204
12210
12214
12216
12217
12241
12245
12250
12251
12256
12271
12272
12274
44
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
SCRAPER MOUNTING PLATE TOP (3X3 & 2X3)...........
SCRAPER MOUNTING PLATE BOTTOM (2X3 & 3X3)..
TUBULAR GANG HANGER 19 DEGREES (7X5 G.B.).....
TUBULAR GANG HANGER 19 DEGREES (3X3 G.B.).....
GANG BEAM ALIGNER CLAMP ASSEMBLY.................
HYDRAULIC HOSE MANIFOLD ADAPTER PLATE (63 & 99 SERIES
OFFSET).......................................................
HYDRAULIC TEE CLAMP ELL,(63 & 99 SERIES)..........
TRUNNION MOUNT WELDMENT, 1 ½” AXLE -SF........
TRUNNION MOUNT WELDMENT, 1 1/8” AXLE - SF.....
HEX BOLT, ½” X 3 ½”, GR. 5............................................
TUBE GANG HANGER 19 DEGREES, 1 ½” AXLE, 4 X 4 BEAM,(HW &
TW6 SERIES).............................................
HEX BOLT, 3/8” X 3”, GR. 2..............................................
TUBE GANG HANGER 19 DEGREES, 1 ½” AXLE, 3 X 5 BEAM FOR
FW20 SERIES.................................................
BRACKET FOR TONGUE JACK.......................................
SET SCREW 3/8” X ½” (DISC PLOW)...............................
GANG BEAM STRAP, 2 X 2 TUBING,(TGE & ECO).......
HEX BOLT, 5/8” X 2 ½”, ALL THREAD...........................
HEX BOLT, 1/2” X 5”, GR. 2..............................................
RH SCRAPER ARM & BLADE ASSY. WITH 9333 ARM.
LH SCRAPER ARM & BLADE ASSY. WITH 9333 ARM.
RH OUTRIGGER SCRAPER ASSEMBLY.........................
LH OUTRIGGER SCRAPER ASSEMBLY.........................
SCRAPER MOUNT BOTTOM PLATE 11 ¼” ...................
MAST WELDMENT QUICK HITCH & CAT. III...............
TUBE GANG HANGER, 19 DEGREES, 4 X 4 G.B. 1 1/8” AXLE................
...................................................................
A-FRAME HITCH,(TLO SERIES)......................................
TUBE GANG HANGER, (6X4) 1 ½” AXLE,(42 SERIES)..
RH ANGLE HANGER, 17 DEGREES(TLO).......................
LH ANGLE HANGER, 17 DEGREES (TLO).....................
TOP LINKAGE WELDMENT,(LIFT ASSIST OFFSET)....
MAST & PIVOT WELDMENT, (LIFT ASSIST OFFSET).
PIVOT PIN,(LIFT ASSIST OFFSET)..................................
LIFT ASSIST BEAM...........................................................
PRESSURE CONTROL SCREW(LIFT ASSIST OFFSET).
G.B. PIVOT CLAMP (J-BOLT)(LIFT ASSIST OFFSET)...
LINKAGE PIN,(LIFT ASSIST OFFSET)...........................
BOTTOM LINKAGE,(LIST ASSIST OFFSET)..................
$15.94
$24.77
$209.88
$105.00
$47.93
$17.36
$10.88
$56.61
$43.64
$1.50
$169.82
$1.04
$191.88
$24.31
$1.62
$7.87
$2.66
$1.62
$55.22
$55.22
$52.56
$52.56
$26.05
$319.74
$145.17
$57.53
$171.79
$44.34
$44.34
$201.77
$231.99
$29.99
$163.23
$111.13
$78.72
$17.71
$148.41
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
12275
12276
12287
12288
12292
12293
12294
12295
12296
12297
12298
12299
12300
12301
12302
12303
12304
12305
12306
12307
12308
12309
12310
12311
12312
12313
12314
12315
12316
12317
12318
12319
12320
12321
12322
12323
12324
12325
12326
12327
Effective:
December 23, 2013
notice.
REAR PIVOT PIN,(LIFT ASSIST OFFSET).......................
FRONT PIVOT PIN,(LIFT ASSIST OFFSET)...................
HITCH PIN,(LIFT ASSIST OFFSET).................................
GANG BEAM TOP CLAMP PLATE..................................
GANG BEAM, 41” - 3 SQUARE.........................................
GANG BEAM, 29” - 3 SQUARE.........................................
GANG BEAM, 43” - 3 SQUARE.........................................
GANG BEAM, 51” - 3 SQUARE.........................................
GANG BEAM, 58” - 3 SQUARE.........................................
GANG BEAM, 56” - 4 X 3...................................................
GANG BEAM, 58” - 4 X 3...................................................
GANG BEAM, 62” - 4 X 3...................................................
GANG BEAM, 66” - 4 X 3...................................................
GANG BEAM, 74” - 4 X 3..................................................
GANG BEAM, 77” - 4 X 3...................................................
GANG BEAM, 70” - 4 X 3...................................................
GANG BEAM, 84” - 4 X 3...................................................
GANG BEAM, 87” - 4 X 3...................................................
GANG BEAM, 93” - 4 X 3...................................................
SCRAPER BAR, 33” RSK - ANGLE...................................
SCRAPER BAR BOTTOM MOUNTING BRKT.(4X3 GB)
TOOL BAR & HITCH ASSEMBLY, 3 SQ. - 60”................
GANG HANGER FOR ROW DISC FOR 3” SQ. TOOL BAR........................
.............................................................
MAIN FRAME GANG BEAM, 41” - 4 X 4(HW SERIES)..
$19.22
$17.94
$27.90
$30.10
$108.84
$52.90
$100.13
$142.24
$158.45
$161.98
$164.38
$175.47
$185.59
$200.04
$206.52
$191.12
$222.38
$229.21
$242.64
$57.88
$62.86
$72.93
$34.03
$261.97
$45.26
$540.73
$544.43
$555.43
$570.25
$573.49
$578.47
$580.43
$602.78
$612.85
$629.63
$633.68
$642.83
$650.47
$669.34
$680.92
45
Effective:
December 23, 2013
notice.
12328
12329
12330
12331
12332
12333
12334
12335
12336
12337
12338
12339
12340
12341
12342
12343
12344
12345
12346
12347
12348
12349
12350
12351
12352
12353
12354
12355
12356
12357
12367
12368
12369
12370
12371
12378
12387
12407
12409
12411
12412
46
WING GANG BEAM, 28” - 4 X 4(HW SERIES).................
WING GANG BEAM, 32” - 4 X 4(HW SERIES).................
WING GANG BEAM, 33” - 4 X 4( HW SERIES)................
WING GANG BEAM, 34” - 4 X 4(HW SERIES)................
3/8” HYDRAULIC HOSE 100” W/CONNECTORS............
ROW DISC GANG HANGER L.H.(3” TOOL BAR)...........
HITCH PIN, CAT. III, 1 7/16” X 7”....................................
MAIN BEAM 4” X 4” X 59”,(HW)......................................
MAIN BEAM 4” X 4” X 69”,(HW)......................................
MAIN BEAM 4” X 4” X 41”,(HW)......................................
MAIN BEAM 4” X 4” X 51”,(HW)......................................
HUB CAP SHIELD FOR DISC PLOW................................
GANG HANGER PILLOW BLOCK FOR 22” BLADE MODELS
DEPTH CONTROL BAR, 29 5/8”,(TW6/HW)....................
DEPTH CONTROL PIN, 5”,(TW6/HW) SEE PART# 13308
SLIDE PLATE TOP FOR 4 X 4 BEAM...............................
GANG ANGLE ADJUSTING LEVER 14 ¾”......................
GANG ANGLE ADJUSTING LEVER 15 9/16”..................
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$695.96
$352.50
$365.46
$368.82
$372.99
$376.92
$407.25
$437.47
$46.08
$62.62
$71.64
$70.62
$71.54
$74.20
$77.68
$80.22
$87.74
$86.94
$90.53
$93.07
$104.30
$111.48
$104.30
$96.43
$86.94
$80.45
$55.80
$51.98
$45.26
$26.63
$594.90
$642.25
$539.11
$573.49
$11.00
$50.94
$73.05
0
$37.04
$25.24
$25.58
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
12413
12414
12415
12416
12417
12418
12419
12420
12421
12423
12437
12443
12444
12447
12448
12449
12450
12451
12452
12453
12454
12455
12456
12457
12458
12459
12460
12461
12462
12463
12464
12465
12466
12467
12468
12498
12499
12502
12511
12512
12513
GANG ANGLE ADJUSTING LEVER 17 ¾”....................
GANG ANGLE ADJUSTING LEVER 19 5/8”....................
GANG ANGLE ADJUSTING LEVER 13”..........................
GANG ANGLE ADJUSTING LEVER 17 ¼”....................
GANG HANGER - BALL FLANGE, YELLOW 4-HOLE....
HOSE TIE DOWN...............................................................
GANG ADJUSTING BAR, REAR 18 ½”.............................
GANG ADJUSTING BAR, FRONT 22 ½”..........................
GANG BEAM 4 X 4 X 47”..................................................
GANG BEAM 4 X 4 X 57”..................................................
GANG BEAM 4 X 4 X 56”..................................................
GANG BEAM 4 X 4 X 66”..................................................
GANG BEAM 4 X 4 X 55”..................................................
GANG BEAM 4 X 4 X 65”..................................................
GANG BEAM 4 X 4 X 75”..................................................
GANG BEAM 4 X 4 X 74”..................................................
GANG BEAM 4 X 4 X 84”..................................................
GANG BEAM 4 X 4 X 76”..................................................
GANG BEAM 4 X 4 X 86”..................................................
GANG BEAM 4 X 4 X 83”..................................................
GANG BEAM 4 X 4 X 93”..................................................
GANG BEAM 4 X 4 X 96”..................................................
MAIN GANG BEAM, 86”,(HW).........................................
MAIN GANG BEAM, 90”,(HW).........................................
HITCH PIN, CAT. I & II, (TB4) SEE PART# 13257
GREASE FITTING, 1/8” X 1 3/4”.......................................
1/8” PIPE COUPLING.........................................................
GREASE FITTING 1/8” NPT STRAIGHT..........................
Effective:
December 23, 2013
notice.
$27.20
$28.25
$30.33
$29.87
$23.38
$23.62
$25.58
$23.73
$26.28
$51.86
$8.80
$23.53
$26.83
$155.82
$181.63
$178.97
$204.78
$176.42
$202.35
$228.28
$225.39
$251.32
$230.71
$256.41
$248.89
$274.59
$282.23
$81.03
$99.56
$96.55
$102.57
$106.04
$111.83
$111.25
$114.72
$691.33
$705.34
0
$2.54
$3.36
$3.13
47
Effective:
December 23, 2013
notice.
12526
12528
12548
12551
12555
12556
12560
12563
12565
12566
12567
12568
12575
12576
12577
12578
12579
12584
12585
12588
12589
12592
12593
12594
12595
12597
12598
12599
12612
12615
12622
12623
12624
12639
12648
12652
12653
12656
12659
48
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
CAM LOCK .................................................
RELEASE LEVER (TB4)....................................................
7-SHANK EXTENSION (CHISEL PLOW).........................
9-SHANK EXTENSION (CHISEL PLOW).........................
MAIN GANG BEAM - 77” (HW)........................................
MAIN GANG BEAM - 87” (HW)........................................
HITCH BUSHING, CAT. II (TLO)......................................
GAUGE WHEEL ARM & SPINDLE (CHISEL PLOW)......
GAUGE WHEEL PIN..........................................................
CUTTING EDGE ½” X 6 X 78”..........................................
SCARIFIER SHANK (TB4).................................................
HEX BOLT, ½” X 2 ½”, GR. 5............................................
SPRING PAD FOR CHISEL PLOW....................................
TOP CLAMP PLATE FOR CHISEL PLOW........................
REAR SHANK CLAMP FOR CHISEL PLOW....................
HITCH PIN, CAT. II............................................................
HITCH PIN, CAT. I & II
DECAL, “TUFLINE” 8”
DECAL, “TUFLINE” 15”
DECAL, “WARNING, HANDS, FEET”
DECAL, “WARNING, ASSEMBLY MANUAL”
DECAL, “DANGER, HYDRAULICS”
DECAL, “DANGER, ELECTRIC SHOCK”
DECAL, “ WARNING”, GB & TB
DECAL, “WARNING, FALLING BLADE”
CHISEL PLOW SHANK 1 1/4” X 2” X 30”........................
CHISEL PLOW POINT
PLOW BOLT, ½” X 2 ½”, GR. 5.........................................
SCARIFIER SHANK W/POINT (PASTURE RENOVATOR/COULTER)......
...........................................
HARD SURFACED POINT ONLY FOR PASTURE RENOVATOR/COULTER..................................................
PRC-10 SHANK EXTENSION-RIGHT HAND...................
PRC-8 SHANK EXTENSION-RIGHT HAND.....................
COULTER ARM & SPINDLE WELDMENT......................
TIE DOWN BAND FOR DRUM RACK..............................
REAR HITCH EYE(PRC)....................................................
HITCH PIN CAT. II FOR PRC (SEE PART# 11167)
PARKING STAND FOR PRC/GB6 - 25 1/2”......................
HUB ASSEMBLY, 4-BOLT FOR COULTER BLADE........
SCARIFIER LATCH FOR HYDRAULIC BOX BLADE.....
$20.72
$64.94
$116.57
$277.14
$671.77
$729.19
$4.28
$111.48
$16.55
$136.53
$77.10
$1.39
$21.53
$17.36
$11.34
$36.12
$39.48
$4.75
$5.33
$2.08
$4.40
$2.43
$2.43
$2.43
$2.43
$219.60
$43.64
$2.32
$67.00
$14.01
$516.18
$434.34
$120.62
$18.87
$36.12
0
$48.50
$98.17
$159.98
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
12681
12682
12683
12703
12704
12705
12719
12722
12723
12728
12735
12738
12739
12740
12741
12743
12747
12750
12756
12760
12765
12766
12836
12841
12842
12848
12849
12852
12853
12854
12856
12860
12870
12871
12878
12879
12888
12889
12890
12891
12892
RH GAUGE WHEEL MOUNTING PLATE WELDMENT.
LH GAUGE WHEEL MOUNTING PLATE WELDMENT..
GAUGE WHEEL CLAMP PLATE (3 SHANK ONLY)...
SLOTTED NUT, 5/8”..........................................................
PRC/10 SHANK EXTENSION LEFT..................................
PRC/8 SHANK EXTENSION LEFT...................................
MAST & TOOL BAR (HRRD)-84”.....................................
CYLINDER TEE ADJUSTING BOLT WELDMENT..........
CYLINDER TEE/ADJUSTING ASSEMBLY......................
PRESSURE CONTROL BAR,(LO40).................................
MAST & PIVOT WELDMENT,(LO40)..............................
GANG BEAM, 3” X 5” X 83”,(LO40).................................
GANG BEAM, 3” X 5” X 74”,(LO40).................................
HW BASIC GANG BEAM, 79”...........................................
HW BASIC GANG BEAM, 49”...........................................
ADJUSTABLE MOUNTING TUBE....................................
DUAL TUBE GANG HANGER...........................................
LEFT MOUNTING PLATE WELDMENT (HRRD)...........
FRONT MOUNTING ANGLE (HRRD)..............................
STRUT - WELDMENT (TXXH).........................................
MAST BUSHING (TXXH)..................................................
MAST BUSHING (V-PLOW).............................................
SUB-RIPPER POINT 2” X 13 1/2”......................................
SUB-RIPPER SHANK 1” X 34”..........................................
HYDRAULIC HOSE 3/8” X 72”.........................................
HITCH PIN 1 7/16” X 8 3/16” (SR).....................................
MAST PIN 1” SP X 5 1/16”.................................................
GW PIVOT PIN 1” X 6 11/16”............................................
MAST BUSHING 1.055 I.D. X 2”.......................................
RIGHT HAND ADJUSTING SCREW................................
SUB-RIPPER SHANK SHIN...............................................
SET SCREW 3/8” X 3 ALL THREAD................................
HEX BOLT 3/4” X 4, GR. 2................................................
LUG STUD 1/2” X 1 UNF...................................................
MOUNTING PLATE, RIGHT (HRRD6).............................
MAST PIN 1” X 4 1/2”(HRRD)...........................................
REGULAR SCRAPER MOUNTING BRACKET (2X2)......
REGULAR SCRAPER BAR HOLDER (3X3).....................
SCRAPER MOUNTING BRACKET(5X3,6X4)(FW,38,42)
SCRAPER MOUNT (4X3,3X3,4X4)(TW5,TW6,4W)..........
SCRAPER BAR MOUNTING BRACKET(2X3,3X3)..........
Effective:
December 23, 2013
notice.
$79.64
$79.64
$45.26
$2.89
$516.18
$434.34
$524.29
$14.01
$129.54
$238.47
$460.73
$294.62
$264.98
$680.10
$426.01
$220.53
$310.59
$141.69
$37.04
$177.93
$5.56
$6.48
$165.00
$368.82
$89.37
$41.56
$19.10
$21.07
$6.48
$61.70
$91.11
$1.74
$4.28
$1.50
$141.69
$17.36
$14.82
$16.05
$37.51
$34.84
$27.34
49
Effective:
December 23, 2013
notice.
12893
12894
12895
12896
12899
12901
12902
12903
12905
12906
12907
12911
12912
12946
12947
12948
12988
13050
13052
13053
13054
13058
13060
13061
13062
13063
13066
13068
13071
13072
13073
13074
13077
13165
13166
13167
13168
13169
13171
13172
13173
50
CLAMP PLATE FOR (3X5), (6X4).....................................
CLAMP PLATE FOR (3X3), (4X3), (4X4)..........................
SLIDE PLATE TOP FOR ADJUSTING BAR (3X3)...........
SLIDE PLATE BOTTOM (3X3), (2X3)...............................
HEX FLANGE LOCKNUT, 3/8”.........................................
FRONT ANGLE ADJUSTING BAR, 26”............................
REAR ANGLE ADJUSTING BAR, 22 1/4”........................
ANGLE ADJUSTING BAR 28”,(TMH)FRONT..................
TUFLINE RED SPRAY PAINT...........................................
TUFLINE YELLOW SPRAY PAINT..................................
SLIDE PLATE TOP FOR ADJUSTING BAR (2X3)...........
FRONT ANGLE ADJUSTING BAR, 29”............................
REAR ANGLE ADJUSTING BAR, 26”...............................
PIVOT BOLT FOR BEARING (SR)....................................
HEX BOLT, 3/8” X 2” GR. 2...............................................
HEX BOLT, 5/8” X 11 1/2”, GR. 5......................................
HEX BOLT, 1” X 8 1/2”, GR/ 5...........................................
HYDRAULIC HOSE 3/8” X 105” W/ENDS........................
HYDRAULIC HOSE 3/8” X 123” W/ENDS
GANG BEAM 4 X 4 X 44”..................................................
ONE GALLON “TUFLINE” RED PAINT...........................
ONE GALLON “TUFLINE” YELLOW PAINT...................
ONE QUART “TUFLINE” RED PAINT..............................
ONE QUART “TUFLINE” YELLOW PAINT.....................
COULTER ARM/SPINDLE/HUB COMPLETE (PRC).......
GANG BEAM 4 X 4 X 41”..................................................
GANG BEAM 4 X 4 X 51”..................................................
AXLE, 7/8” SQ. X 41 1/2” (6 BLADE, 7 1/2” SPACING)
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$20.72
$21.23
$30.12
$12.06
$1.16
$32.76
$27.90
$35.31
$15.74
$17.71
$28.01
$36.58
$32.76
$6.71
$0.58
$9.26
$15.74
$55.22
$62.86
$66.79
$74.32
$107.89
$115.65
$123.06
$129.54
$135.33
$143.20
$150.84
$158.25
$168.90
$182.09
$196.68
$148.06
$91.92
$87.86
$23.04
$22.81
$258.15
$140.42
$154.89
$54.64
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
13174
13190
13226
13227
13228
13229
13230
13231
13232
13233
13234
13235
13236
13237
13238
13239
13240
13241
13242
13243
13245
13246
13247
13253
13254
13255
13257
13258
13259
13260
13261
13264
13279
13294
13295
13303
13304
13308
13309
13310
13311
HEX BOLT 1 1/4” X 4 1/2”, GR. 5......................................
HYDRAULIC CYLINDER 3” X 12”...................................
GANG BEAM 5 X 7 X 116”................................................
GANG BEAM 5 X 7 X 135”................................................
GANG BEAM 5 X 7 X 137”................................................
GANG BEAM 5 X 7 X 153”................................................
GANG BEAM 5 X 7 X 158”................................................
GANG BEAM 5 X 7 X 171”................................................
GANG BEAM 5 X 7 X 179”................................................
GANG BEAM 5 X 7 X 189”................................................
GANG BEAM 5 X 7 X 200”................................................
GANG BEAM 5 X 7 X 221”................................................
GANG BEAM 5 X 7 X 207”................................................
GANG BEAM 5 X 3 X 93”, (LO40)....................................
HITCH PIN CAT. 2 & 3, (LO40)........................................
LEVELING TUBE 72 1/2” (LO40922/24)............................
HEX BOLT 1” X 3”, GR. 8..................................................
HEX BOLT 1” X 7”, GR. 5..................................................
HEX BOLT 5/8” X 1 1/2”, GR. 8.........................................
HITCH PIN CAT. I & II, (GB4)...........................................
ADJUSTING BAR 18 1/2”, (GB4).......................................
ADJUSTING SLEEVE 18”, (GB4)......................................
ADJUSTING BAR PIN 1”, (GB4,5,6)..................................
FLATWASHER 9/16”..........................................................
HITCH BAR, WELDMENT, (GB4).....................................
MAIN BAR WELDMENT, (GB4).......................................
PIVOT HOUSING, (GB4)...................................................
MOLDBOARD FOR GB4-72..............................................
CONNECTOR PLATE 1/2” X 6 1/2”, (GB4)......................
MOLDBOARD ANGLE PIN 1” X 3”..................................
TILT PIN 3/4” X 5”, (GB4)..................................................
PARK STAND 24 1/2”, (GB4/GB1)...................................
STRUT PIN 1” X 5”, (GB4/GB1).......................................
TOP LINK PIN 1” X 3 1/2”, (GB4).....................................
Effective:
December 23, 2013
notice.
$15.05
$375.30
$131.16
$139.49
$900.40
$1,044.87
$1,059.92
$1,181.01
$1,218.86
$1,317.26
$1,377.92
$1,453.51
$1,536.75
$1,695.69
$1,590.00
$184.99
$192.28
$200.85
$210.11
$216.13
$327.03
$53.83
$324.48
$6.71
$15.74
$1.50
$27.34
$45.26
$48.50
$13.20
$0.81
$367.89
$555.43
$348.33
$622.57
$24.31
$14.82
$11.46
$38.32
$21.88
$14.59
51
Effective:
December 23, 2013
notice.
13316
13317
13326
13328
13331
13335
13339
13344
13345
13346
13347
13348
13349
13358
13360
13361
13362
13363
13366
13367
13370
13372
13386
13387
13388
13397
13400
13403
13404
13405
13408
13409
13410
13411
13418
13419
13420
13422
13423
13424
13425
52
MOLDBOARD FOR GB4-84..............................................
MOLDBOARD FOR GB4-96..............................................
LATERAL ADJUSTING BAR (GB1)..................................
ADJUSTING BAR RECEIVER (GB1).................................
HITCH WELDMENT (GB1)...............................................
MAIN BAR WELDMENT (GB1)........................................
PIVOT & TILT, HOUSING (GB1)......................................
MOLDBOARD WELDMENT,(GB1-60)..............................
TILT PIN, 7/8” X 6”............................................................
PIVOT PIN, 3/4” X 10”.......................................................
PIVOT PIN STOP................................................................
COULTER ARM 16 3/4” (PRCM).......................................
RENOVATOR SHANK (PRCM) HEAT TREATED...........
HEX BOLT 1/2” X 2 1/4” GR. 5..........................................
HEX BOLT 3/4” X 2 1/2 GR. 5...........................................
HEX BOLT 3/8” X 2 1/2” GR. 5..........................................
COULTER ARM 9”, WITH SPINDLE (PRCM)..................
FRONT DRUM RACK MOUNTING BRACKET (PRCM).
REAR DRUM RACK MOUNTING BRACKET (PRCM)....
DRUM TIE DOWN STRAP, (PRCM).................................
CRANK HANDLE FOR SCREW ADJUSTMENT
LUG BOLT 9/16” X 1” NF (63 & 99 SERIES)....................
MAIN FRAME, GB0
STRUT, (GB0)
ANGLE PIN, 7/8” X 4” (GB0)............................................
Replaceable POINT FOR 1/2” HEAT TREATED Shank
MOLDBOARD WELDMENT 60” FOR GB0-60.................
MOLDBOARD WELDMENT 72” FOR GB0-72.................
DUAL TUBE GANG HANGER, 1 1/8’, (FOR MRRD6)....
AXLE 1 1/8” X 23 5/8” (MRRD6).......................................
GANG BEAM 4” X 4” X 108”.............................................
BEARING 1” (W208PPB6)..................................................
BEARING SPOOL, 1” X 7 1/2”...........................................
CAP, WITH GREASE FITTING FOR BEARING SPOOL..
END WASHER, 1”..............................................................
BUMPER WASHER, 1”......................................................
SPACER SPOOL 1” X 7 1/2”..............................................
SPACER SPOOL 1” SQ.” X 9”............................................
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$663.67
$720.97
$34.15
$35.89
$303.18
$286.86
$255.24
$435.96
$481.69
$517.81
$14.93
$14.01
$1.74
$37.04
$74.32
$1.21
$3.70
$0.58
$71.89
$29.64
$31.37
$10.88
$21.53
$3.82
$309.90
$16.67
$17.36
$29.64
$327.72
$350.76
$269.61
$44.80
$313.48
$124.91
$29.98
$16.15
$13.54
$8.45
$19.43
$16.87
$21.79
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
13426
13427
13428
13429
13430
13431
13432
13433
13434
13435
13436
13440
13441
13442
13443
13444
13445
13446
13447
13448
13449
13450
13451
13452
13453
13454
13455
13456
13465
13466
13467
13471
13476
13505
13510
13511
13512
13521
13522
13523
Effective:
December 23, 2013
notice.
END SPACER, 1” SQ., 2 3/8”(FOR 7 1/2”& 9”SPACING)
END SPACER, 1” SQ., 3 5/8”(FOR 7 1/2”SPACING)........
END SPACER 1” SQ. 5 1/8” (FOR 9” SPACING)..............
AXLE 1” SQ. X 25 3/4”” ( 4 BLADE, 7 1/2” SPACING)......
AXLE 1” SQ. X 33 1/4” ( 5 BLADE, 7 1/2” SPACING)......
AXLE 1” SQ. X 40 3/4” ( 6 BLADE, 7 1/2” SPACING)......
AXLE 1” SQ. X 21 1/4” (3 BLADE, 9” SAPCING).............
AXLE 1” SQ. X 30 1/2” ( 4 BLADE, 9” SPACING)............
AXLE 1” SQ. X 39 1/4” ( 5 BLADE, 9” SAPCING)............
HEX BOLT 1/2” X 7 1/2” GR. 8.........................................
GANG HANGER FOR 1” FRICTION BEARING...............
REMOVEABLE DISC HUB MOUNT, (TDP3)...................
REMOVEABLE DISC HUB MOUNT, WITH FURROW WHEEL MOUNTING ARM, (TDP3)..................................
FURROW WHEEL SPINDLE MOUNTING ARM..............
GAUGE WHEEL SPINDLE & MOUNTING ARM.............
GAUGE WHEEL ADJUSTING BAR...................................
HITCH PIN, CAT 2 & 3......................................................
LEVELING PIN, 1” X 5”.....................................................
MAST PIN, 1” X 3 1/2”.......................................................
LEVELING GUIDE BAR(TDP3).......................................
LEVELING TUBE (TDP3)..................................................
PARKING STAND, 34” (TDP3)..........................................
UPPER MAST PIN 1 1/4” X 4” (GB6)................................
PLOW BOLT, 5/8” X 2 1/4”................................................
SKID SHOE WELDMENT..................................................
OBSOLETE, SEE VP35M
CUTTING EDGE, 108” (9’).................................................
CUTTING EDGE, 120” (10’)...............................................
MANUAL OFFSET ADJUSTING BAR (GB6)....................
MANUAL ADJUSTING BAR RECEIVER (GB6)...............
MANUAL REAR TILT BAR (GB6)....................................
DRAWBAR & SWING BAR PIN (GB6).............................
4” WASHER........................................................................
TILT & PIVOT HOUSING (GB6)......................................
PIVOT HOUSING REAR TILT BOLT (GB6).....................
PIVOT HOUSING TILT BOLT BUSHING (GB6)..............
HITCH WELDMENT FOR 96” & 108” MODELS..............
SWING BAR WELDMENT FOR GB6-96...........................
HITCH WELDMENT FOR GB6-120..................................
SWING BAR WELDMENT FOR GB6-108 & 120..............
$15.08
$15.52
$19.43
$43.87
$52.32
$64.13
$42.14
$49.08
$61.93
$6.48
$39.24
$532.51
$555.43
$97.59
$143.55
$47.35
$55.57
$15.74
$13.20
$118.89
$134.52
$44.34
$19.45
$2.66
$48.50
0
$197.03
$218.33
$68.88
$57.65
$74.78
$278.52
$14.93
$818.56
$76.29
$70.85
$1,391.00
$1,319.00
$1,352.45
$1,333.58
53
Effective:
December 23, 2013
notice.
13524
13525
13526
13527
13528
13539
13540
13549
13562
13563
13566
13567
13568
13569
13570
13571
13572
13573
13574
13592
13593
13603
13604
13610
13612
13613
13614
13629
13630
13632
13633
13633A
13635
13635A
13636
13637
13638
13639
13640
13641
13689
54
MOLDBOARD WELDMENT FOR GB6-96........................
MOLDBOARD WELDMENT FOR GB6-108.....................
MOLDBOARD WELDMENT FOR GB6-120......................
TOP LINK MAST PIN 1” X 5 3/8” (GB6)...........................
HITCH PIN CAT. II & III (GB5, GB6)................................
HITCH WELDMENT (GB5)...............................................
SWING BAR WELDMENT.................................................
TILT & PIVOT HOUSING (GB5)
REAR TILT BOLT, 12 1/2”................................................
REAR MANUAL TILT BAR WELD’T GB5
PIVOT HOUSING BUSHING, 9 7/16”................................
ADJUSTING TUBE PIN, 1” X 3 1/2”..................................
FRONT SWING BAR PIN, 1 1/2” X 8 7/8”........................
ADJUSTING TUBE RECEIVER.........................................
MANUAL OFFSET ADJUSTING TUBE............................
MOLD BOARD WELDMENT, 7’.......................................
HYDRAULIC HOSE W/CONNECTORS 60”
TUFLINE DECAL 3.5 X 18
HYD. HOSE 3/8” X 120” W/ENDS
GANG BEAM (REAR) 5 X 3 X 57”
HEX BOLT 1” X 4” GR. 5 PLAIN
SKID SHOE FOR PHB
SCRAPER ARM (1/2 X 2 X 9 ¾ DOUBLE BEND)
BRG. RETAINER NUT ASSY W/SET SCREW 1 ½” JAM
4” SWEEP POINT
SR WING POINT & WING BLADE ASSY
HUB & SPINDLE ASSY (5 BOLT HUB 1 5/8 SPINDLE)
TILT & PIVOT HOUSING COLLAR ( 4” OD X 3” ID)
MAIN BAR WELDMENT
MAIN BAR WELDMENT - GB4HR
TILT PLATE WELDMENT
TILT PLATE WELDMENT - GB4-HR
MOLDBOARD WELDMENT 6’
REAR TILT BOLT WELDMENT
HYDRAULIC HOSE 3/8 X 62 W/FITTINGS
HYDRAULIC HOSE 87” W/FITTINGS
1” BEARING IN FLANGE HOUSING (W208PPB6)
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$2,169.85
$2,262.46
$2,360.74
$23.04
$61.01
$1,244.45
$1,218.86
$761.95
$68.88
$74.90
$52.90
$17.02
$31.95
$63.32
$61.01
$2,039.74
$2,147.74
$2,254.13
$80.45
$5.09
$127.57
$220.87
$7.52
$137.76
$32.18
$12.62
$19.58
$172.14
$200.17
$48.50
$577.54
$605.55
$375.30
$420.33
$693.07
$724.09
$737.29
$28.94
$82.08
$101.64
$36.29
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
13726
13772
13796
13801
13806
13807
13810
13811
13812
13813
13814
13815
13841
13842
13843
13844
13845
13875
13876
13877
13878
13879
13941
13944
13947
14138
14139
14140
14141
14149
14150
14167
14168
14169
14210
14241
14303
14306
14307
14308
14309
HITCH WELDMENT FOR GB4-H
SKID SHOE WELDMENT FOR PHB
SKID SHOE WELDMENT FOR GB5 & GB6
SKID SHOE MOUNTING BRACKET WELD’T
BOX WELDMENT,48” BB0-48
BOX WELDMENT, 60” BB0-60
TOOL BAR WELDMENT 36” FOR TB0
CYLINDER ARM GUIDE WELDMENT TB3
HYD. SCARIFIER RETRACTOR ARM WELD’T
CYLINDER ARM GUIDE PIVOT PIN
TOOL BAR WELDMENT 60” (LR1)
LANDSCAPE RAKE TINE, 2-HOLE
HEX BOLT 3/8” X 1 1/2”
PREVENTION WARNING DECAL
OVERTURN WARNING DECAL
IMPORTANT DECAL
BOLT ON COULTER BRACKET
CAT III BUSHING
GANG BEAM 3 X 3 X 62” TLO
ASSEMBLY & Operators Manual- TB-Box Blades
ASSEMBLY & Operators Manaul- GBO-Grader Blade
ASSEMBLY & Operators Manual - GB1/GB4 Grader Blade
ASSEMBLY & Operators Manual- GB4H, GB5, GB6 Blades
Effective:
December 23, 2013
notice.
$363.15
$69.80
$78.72
$78.49
$498.59
$520.01
$390.00
$398.22
$424.50
$444.18
$451.36
$490.95
$435.96
$450.66
$462.12
$475.21
$535.86
$546.51
$554.62
$566.19
$741.00
$966.27
$55.22
$37.51
$27.20
$360.60
$368.82
$380.51
$410.49
$11.23
$0.58
$1.39
$1.39
$1.39
$73.05
$11.34
$151.65
$9.96
$9.96
$9.96
$9.96
55
Effective:
December 23, 2013
notice.
14310
14311
14312
14315
14316
14317
14318
14319
14320
14321
14322
14323
14324
14325
14326
14327
14328
14329
14330
14331
14332
14334
14335
14336
14337
14338
14339
14340
14341
14344
14345
14346
14347
14413
14418
14419
14420
14427
14435
14437
14438
56
ASSEMBLY & Operators Manual - TGE/ECO/TE/ECOR
ASSEMBLY & Operators Manual- TME & THE Disc
ASSEMBLY & Operators Manual- TH & THF Disc
ASSEMBLY & Operators Manual- TS & TSF Disc
ASSEBMLY & Operators Manual - TLO Lift Offset Disc
ASSEBMLY & Operators Manual - TXXH Disc
ASSEMBLY & Operators Manual - RD Row Disc
ASSEMBLY & Operators Manual - PHB Box Blade
ASSEMBLY & Operators Manual - TW5 Wheel Disc
ASSEMBLY & Operators Manual - TW6 Wheel Disc
ASSEMBLY & Operators Manual - HW Wing Disc
ASSEMBLY & Operators Manual - 38/42 Offset Disc
ASSEMBLY & Operators Manual - PR PastureRenovator
ASSEMBLY & Operators Manual - PRC Pasture Renovator
ASSEMBLY & Operators Manual - 38/42 Shock Flex Disc
ASSEMBLY & Operators Manual - PRCM Pasture Renovator
ASSEMBLY & Operators Manual - V-PLOW
ASSEMBLY & Operators Manual - SUB-SOILER
ASSEMBLY & Operators Manual - SR SUB-RIPPER
ASSEMBLY & Operators Manual - TDP 2-Blade Disc Plow
ASSEMBLY & Operators Manual - TDP 3-Blade Disc Plow
ASSEMBLY & Operators Manual - HRRD Row Disc
ASSEMBLY & Operators Manual - MRRD Row Disc
ASSEMBLY & Operators Manual - LO40 Offset Disc
ASSEMBLY & Operators Manual - Chisel Plow
ASSEMBLY & Operators Manual - Parabolic Sub-Soiler
ASSEMBLY & Operators Manual - LR1 Landscape Rake
ASSEMBLY & Operators Manual - ATVD Disc, Series I & II
Assembly & Operators Manual - ATV Box Blade & Land Rake
ASSEMBLY & Operators Manual - 63 Offset Disc
ASSEMBLY & Operators Manual - 99 Offset Disc
ASSEMBLY & Operators Manual - HL Disc Harrow
ASSEMBLY & Operators Manual - 63 Offset Disc Shock Flex
MAST WELDMENT TL-43
STRUT, 35 3/4” TL-43, RIGHT
GANG HANGER, BF -(Cast Iron)
CUTTING EDGE, 54”
ASSEMBLY & Operators Manual - TL43
SQ. AXLE HEAD, 1 1/8”
FLAT WASHER 9/16”
BALL FLANGETTE GANG HANGER, 3W
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$13.20
$13.20
$13.20
$13.20
$13.20
$13.20
$6.71
$6.71
$14.93
$14.93
$14.93
$14.93
$6.71
$9.96
$14.93
$9.96
$9.96
$9.96
$9.96
$9.96
$9.96
$6.71
$6.71
$9.96
$9.96
$9.96
$9.96
$9.96
$9.96
$14.93
$14.93
$13.20
$14.93
$204.07
$42.02
$43.73
$93.54
$13.20
$7.52
$0.46
$53.48
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
14477
14478
14479
14508
14509
14510
14533
14594
14629
14630
14631
14632
14634
14679
14683
14688
14739
14754
14755
14770
14771
14779
14834
14835F
14837
14840
14841
14856
14857
14858
14861
14862
14876
14905
14906
14907
14908
14938
14939
14943
14952
Effective:
December 23, 2013
notice.
AXLE 1” X 18” (3 BLADE, 7 1/2” SPACING) SEE PART# 15187
AXLE 1” X 49” (6 BLADE, 9” SPACING)
AXLE 1” X 58” (7 BLADE, 9” SPACING)
MOLDBOARD WELDMENT, 48” ATVG-48
MOLDBOARD WELDMENT, 60” ATVG-60
CUTTING EDGE, 60” FOR ATG-60
2” BALL COUPLER (Coupler Only)
AXLE 1” X 48 1/4” (7 BLADE, 7 1/2”)
GANG BEAM 4 X 3 X 30”, TL-43
MOSSY OAK BIOLOGIC by Tufline ATV Decal Page
GAUGE WHEEL MOUNTING BRACKET, (LR1)
GAUGE WHEEL ARM WELDMENT, (LR1)
GAUGE WHEEL YOKE WELDMENT, (LR1)
ASSEMBLY & Operators Manual - 38 Vineyard Series
TOOL BAR WELDMENT 72”, FOR ATVLR-72
TOOL BAR WELDMENT 72”, FOR LR0-72
TOOL BAR WELDMENT FOR BCP1816
TOOB BAR WELDMENT FOR BCP2416
ASSEMBLY & Operators Manual - ATVG
TBX - BOX BLADE SHANK
SCARFIRE SHANK - notched front (TB30 & TB40),
MAIN FRAME, WELDMENT ATVB-H
HEX BOLT, 1/2” X 3” GR. 5
MAIN FRAME WELDMENT, ATVLR-H & ATVG-H
ASSEMBLY & Operators Manual - LP Land Plane
ASSEMBLY & Operators Manual - TBX Box Blade
ADJUSTING HANDLE WELDMENT
GANG HANGER, FOR 1” AXLES ON TE3,4,5
GANG HANGER, FOR 1” AXLES ON TGE3,4,5
SCREW ADJUSTMENT HANDLE
SPACER SPOOL 1 1/8” X 9”
SPACER SPOOL 1 1/8” X 7 1/2”
CULTI-PACKER GANG HANGER WELDMENT, LEFT
CULTI-PACKER GANG HANGER WELDMENT, RIGHT
CULTI-PACKER ROLLER LOCKING BRACKET
U-BOLT 1/2” for CULTI-PACKER
MAIN BAR WELDMENT, GB4-HR
TILT PLATE WELDMENT, GB4-HR
0
$75.94
$86.94
$548.71
$583.91
$104.19
$49.08
$74.78
$84.69
$93.23
$104.52
$135.56
$15.98
$26.28
$58.34
$43.64
$14.93
$416.17
$421.84
$697.93
$937.10
$9.96
$49.79
$54.87
$430.17
$1.39
$425.31
$6.71
$6.71
$43.64
$22.81
$25.58
$28.94
$28.69
$25.97
$114.03
$114.03
$126.88
$27.90
$653.83
$497.43
57
Effective:
December 23, 2013
notice.
14962
14963
14964
14965
14966
14967
14968
14969
14970
14971
14972
14974
14977
14978
14979
14980
14981
14982
14983
14984
14985
14986
14987
14990
14991
14992
14993
14994
14995
14996
14997
14998
14999
15000
15001
15002
15003
15004
15005
15006
15007
58
CULTI-PACKER ROLLER 72”
CULTI-PACKER ROLLER 96”
CULTI-PACKER ROLLER, 44”
ASSEMBLY & Operators Manual - ATV Disc
ASSEMBLY & Operators Manual - UC-20 & UC-30 Cart
ASSEMBLY & Operators Manual - BT25M10 SPRAYER
ASSEMBLY & Operators Manual - BTU55T10 SPRAYER
ASSEMBLY & Operators Manual - STB SPREADER
ASSEMBLY & Operators Manual - SB SPREADER
CULTI-PACKER WHEEL
ASSEMBLY & Operators Manual - BCP CULTI-PACKER
GANG BEAM 4” X 3” X 41”
HEX BOLT, 1/2” X 5 1/4” GR. 2
RAKE TINE, 1-HOLE
REGULAR SCRAPER BAR, 24”
HEAVY SCRAPER BAR, 30”
END SPACER 1” X 1 1/2”
PIPE SPACER FOR 1” AXLE, 3/4”
PLOW BOLT 7/16” X 1 1/2”
FLAT WASHER, 7/16”
HEX NUT 7/16”
LOCK WASHER, 7/16”
A-FRAME MEMBER, 2” RIGHT
A-FRAME MEMBER, 2” LEFT
STRUT, 3/8” X 23 1/2” RIGHT
SMV SIGN
BRACKET FOR SMV SIGN
CARRIAGE BOLT 5/16” X 1” GR. 5
BUSHING 2 1/4” (TL43)
ATVD MAIN FRAME WELD’T
WHEEL CARRIAGE WELD’T FOR ATVD
SPINDLE WELDMENT FOR ATVD
TONGUE WELDMENT FOR ATVD
HITCH ADJUSTMENT WELD’T FOR ATVD
TURNBUCKLE ASSY FOR ATVD
WHEEL CARRIAGE CUFF (TOP) FOR ATVD
BF HANGER FOR ATVD
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$2,777.72
$3,383.16
$2,065.55
$9.96
$6.71
$6.71
$6.71
$6.71
$6.71
$79.88
$6.71
$126.18
$1.74
$9.96
$51.62
$55.10
$65.38
$15.94
$12.62
$1.50
$0.81
$0.58
$0.58
$41.01
$41.01
$26.42
$36.87
$36.36
$5.09
$28.69
$14.75
$0.81
$10.03
$1,007.71
$512.83
$86.66
$350.76
$70.62
$183.54
$55.80
$56.26
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
15008
15009
15043
15044
15045
15046
15047
15070
15071
15081
15082
15091
15092
15094
15095
15096
15097
15098
15099
15100
15105
15110
15113
15114
15121
15122
15123
15124
15125
15128
15129
15130
15131
15132
15133
15134
15135
15136
15139
15142
15143
BALL COUPLER 1 7/8” FOR ATVD
HITCH ARM WELD’T FOR ATVD
BALK BREAKER SWEEP
SEE PART# 13614
PLOW BOLT 7/16”
SEE PART # 14984
FLATWASHER 7/16”
SEE PART# 14985
LOCKWASHER 7/16”
SEE PART# 14987
HEX NUT 7/16” PLAIN
SEE PART# 14986
ADJUSTMENT PIN 5/8” X 8” FOR ATVD
ATVD-2 MAIN FRAME WELD’T
OBSOLETE, SEE 15232
WHEEL CARRIAGE WELD’T FOR ATVD-2
SLIDE PLATE WELD’T FOR ATVD-2
SLIDE PLATE BOTTOM FOR ATVD-2
ANGLE ADJUSTING PIN FOR ATVD-2
FLANGETTE HANGER FOR ATVD-2
SPACER (WHEEL) FOR ATVD-2
SLIDE PLATE WELD’T FOR ATVD (3 X 3)
SLIDE PLATE BOTTOM 3X3 ATVD
RIM & TIRE ASSEMBLY FOR ATVD-2, ATVLR, ATVG
MAIN FRAME WELD’T FOR ATVLR
WHEEL CARRIAGE WELDMENT, ATVLB
LIFT ADJUSTMENT HANDLE WELDMENT
DEPTH ADJUSTMENT LOCK
WHEEL CARRIAGE ADJUSTMENT ARM WELDMENT
PIVOT PIN (WHEEL CARRIAGE)
TOOL BAR WELDMENT, 48” ATVLR
TOOL BAR WELDMENT, 60” ATVLR
TINE BAR WELDMENT, 48” LR0-48
TINE BAR WELDMENT, 60” LR0-60
EXTENSION SPRING
HEX BOLT 3/8” X 3 1/2” GR. 5
FLAT WASHER, 3/8”
LOCK NUT W/NYLON INSERT, 3/8”
LOCK NUT W/NYLON INSERT, 5/8”
COTTER PIN 7/32” X 2”
COTTER PIN 5/32” X 1 1/2”
PULL PIN
HAIR PIN
MAIN FRAME WELD’T FOR ATVB
MOLDBOARD & BOX WELD’T, 42”
MOLDBOARD & BOX WELD’T, 48”
Effective:
December 23, 2013
notice.
$47.76
$24.77
0
0
0
0
0
$11.69
$417.90
$0.00
$367.08
$22.34
$6.71
$9.03
$50.12
$4.40
$29.52
$11.92
$92.73
$390.00
$111.48
$44.34
$23.85
$39.82
$32.18
$332.70
$347.40
$332.12
$349.14
$5.90
$1.27
$0.58
$0.81
$1.28
$1.16
$1.04
$26.63
$1.04
$405.75
$483.42
$501.37
59
Effective:
December 23, 2013
notice.
15152
15154
15155
15156
15157
15159
15160
15161
15162
15163
15166
15167
15170
15171
15176
15177
15179
15180
15185
15187
15197
15198
15201
15202
15203
15204
15205
15206
15207
15208
15209
15210
15211
15212
15213
15214
15232
15239
15242
15243
15244
60
WHEEL CARRIAGE ADJ. ARM WELDMENT
CUTTING EDGE FOR 42” ATVB
CUTTING EDGE FOR 48” ATVB
WHEEL AND TIRE ASSEMBLY, 12” (ATVB)
WHEEL BEARING, 5/8”
WHEEL CARRIAGE WELDMENT, ATVLR
26” RECEIVER TUBE, (GROUND HOG)
1/4” FLAT SPACER, (GROUND HOG)
1/2” FLAT SPACER, (GROUND HOG)
SPACER BLOCK, (GROUND HOG)
TONGUE STRAP, (GROUND HOG)
MALE HITCH (GROUND HOG)
ADJUSTING TUBE, 10 1/2”, (GROUND HOG)
AXLE ASSEMBLY, (GROUND HOG)
INNER SPACER, (GROUND HOG)
3” OUTER SPACER, (GROUND HOG)
8” PLAIN BLADE WITH BEARING FOR GROUND HOG
5” GROUNDHOG RECEIVER TUBE
HAIR PIN
AXLE 1” X 18” (3 BLADE, 7 1/2” SPACING)
HEX BOLT 5/16” X 1” GR. 2
5/16” NYLON INSERT LOCK NUT
STRUT, 3/8” X 23 1/2”, LEFT
STRUT, 3/8” X 29 3/4”, LEFT
STRUT, 1/2” X 29 3/4”, LEFT
STRUT SPACER, 1 3/4”
STRUT, 35 1/2”, LEFT
CAT. 1 TOP LINK PI, 3 7/8” USABLE LENGTH
CAT. 1 TOP LINK PI, 3 7/8” USABLE LENGTH
CAT. 2 TOP LINK PIN, 4 3/8” USABLE LENGTH
CAT. 1 BUSHING, 1 15/16”
ROUND HEAD MACHINE SCREW, 1/8” X 1/2” GR. 2
HEX NUT, 1/8”
HEX BOLT, 5/16” X 1 1/2” GR. 2
WHEEL CARRIAGE CUFF (TOP) FOR ATVD-2
HEX BOLT 1” X 2” GR. 5
AXLE HEAD 1 1/4” FOR 7/8” AXLE
AXLE HEAD 1 3/4” FOR 1 1/8” AXLE
AXLE HEAD 2 1/2” FOR 1 1/2” AXLE
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$39.94
$73.05
$83.23
$81.84
$13.20
$115.65
$94.81
$2.08
$2.55
$12.62
$21.30
$126.88
$65.64
$129.77
$15.05
$19.33
$54.29
$35.08
$0.46
$36.96
$0.69
$0.69
$26.42
$36.36
$36.87
$3.37
$43.04
$6.60
$8.78
$12.15
$4.05
$6.02
$8.45
$0.69
$0.46
$0.81
$35.77
$5.90
$9.26
$9.96
$12.97
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
15274
15276
15277
15289
15292
15295
15330
15336
15337
15338
15354
15355
15356
15365
15366
15368
15376
15390
15398
15406
15408
15410
15412
15413
15421
15423
15439
15441
15451
15452
15453
15467
15477
15478
15486
15487
15488
15501
15511
15513
15516
TINE BAR CLAMP
MOLDBAORD WELDMENT, 84” GB0-84
MOLDBOARD WELDMENT, 48” GB0-48
GANG BEAM 4 X 4 X 102”
STRUT 26 3/4” TMEB
SPINDLE WASHER, 5/8” (PRC)
COTTER PIN, 3/16” X 2”
ELECTRIC ACTUATOR (500LB)
SAFETY LABEL, (GROUND HOG)
OWNERS MANUAL, (GROUND HOG)
WHEEL CARRIAGE WELDMENT, TW52 91”
HEX BOLT, 1/4” X 1 1/2”
1/4” NYLON INSERT LOCK NUT
HYDRAULIC QUICK COUPLER
SPACER WASHER, 4” FOR 1 1/2” AXLE
EXTENSION ARM (TB30)
PIN, 1” X 14 1/8”
SEAL KIT FOR 3X8 CYLINDER, 3000 PSI
SCARFIRE SHANK BAR, TB3060H
RETAINER CLILP (TB30 & TB40)
INNER LOCK ARM (TB30 & TB40)
ELBOW FOR ATVD 2” COUPLER
HYDRAULIC RESTRICTOR ELBOW
LOCK ARM (TB30 & TB40)
HYDRAULIC ARM LEVER (TB30 & TB40)
TOP CYLINDER HOSE (TB30 & TB40)
BOTTOM CYLINDER HOSE (TB30 & TB40)
WHEEL SPACER FOR FLIP DISC
SAFTEY DECAL SHEET (4 DECALS) TB30, TB40
REPLACEABLE POINT FOR BOX SHANK, 10677S
2 x 4 CYLINDER (TB30 & TB40)
Effective:
December 23, 2013
notice.
$12.95
$413.16
$277.95
$299.94
$30.45
$0.81
$0.58
$813.23
$5.79
$7.29
$1,317.72
$205.84
$212.58
$0.86
$1.70
$16.45
$11.69
$85.20
$22.76
$84.16
$454.60
$491.53
$505.77
$10.07
$22.57
$85.20
$29.98
$102.68
$557.05
$578.47
$611.23
$266.49
$39.94
$39.94
$673.97
$685.31
$710.90
$12.16
$16.55
$10.07
$463.05
61
Effective:
December 23, 2013
notice.
15517
15518
15520
15521
15522
15523
15524
15525
15526
15527
15528
15529
15530
15531
15532
15533
15534
15535
15536
15541
15557
15558
15559
15560
15561
15563
15564
15566
15567
15568
15569
15570
15571
15572
15576
15579
15587
15589
15590
15592
15598
62
SPRING, 3 1/2” (TB30)
SPRING, 4 1/2” (TB40)
EXTENSION ARM (TB40)
MAIN FRAME, TB3060H
MAIN FRAME, TB3066H
MAIN FRAME, TB3072H
MAIN FRAME, TB3078H
MAIN FRAME, TB3084H
MAIN FRAME, TB3096H
MAIN FRAME, TB4078H
MAIN FRAME, TB4084H
MAIN FRAME, TB4096H
COTTER PIN, 3/16”X 2”
BOTTOM CYLINDER PIN, 3/4”
CYLINDER PIN, 1”
HYDRAULIC SEAL KIT (C20201A)
PIN, 1/2” X 2”
PIN, 1/2” X 1 1/2”
PIN, 1/2” X 3”
PIN, 1” X 3 9/16”
TURNBUCKLE HANDLE
TURNBUCKLE HANDLE EXTENDED
LEFT A-FRAEME 2 1/2”, (TH/THE)
RIGHT A-FRAME 2 1/2”, (TH/THE)
TB30, TB40 ASSEMBLY MANUAL
2” ADAPTER SLEEVE
FLANGETTE HOUSING AND PPB5 BEARING ASSEMBLY
CULTI-PACKER ROLLER, 52”
PLOW BOLT, 5/8” X 2 1/4” GR. 2
FLAT WASHER, 7/8”
ASSEMBLY & OPERATORS MANUAL - ATV CULTI-PACKER
GANG BEAM 3” X 3” X 40” for UTD DISC (5 BLADE)
GANG BEAM, 3” x 3” x 60” for UTD DISC (7BLADE)
WHEEL CARRIAGE CUFF (TOP)
CUTTING EDGE, 59 3/4” (ATVLP-60)
ATVLP TONGUE WELDMENT
CARRIAGE BOLT, 5/8” X 1 3/4” GR. 2
WHEEL CARRIAGE WELDMENT
GANG BEAM, 3” X 3” X 47” for UTD DISC (6 BLADE)
157” BCP TOOL BAR WELDMENT
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
$39.94
$41.44
$85.20
$1,866.09
$2,052.70
$2,240.81
$2,427.31
$2,614.03
$2,987.14
$2,688.01
$2,894.64
$3,309.19
$1.23
$4.98
$14.70
$41.44
$2.55
$2.43
$2.89
$8.68
$12.62
$16.55
$58.28
$58.28
$7.29
$13.66
$42.14
$1,816.31
$7.76
$1.39
$2.66
$6.71
$91.22
$136.83
$35.77
$109.86
$282.17
$2.43
$372.76
$107.20
$1,263.43
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361
15602
15605
15606
15607
15608
15614
15618
15620
15624
15650
15651
15652
15666
15667
15668
15669
15670
15671
15672
15673
15674
15675
15676
15682
15689
15690
15691
MAST WELDMENT
3/8” X 75” HYD. HOSE WITH ENDS
CENTER GANG HANGER FOR BCP3618
ASSEMBLY & Operators Manual - LP Land Plane
CUTTING EDGE, 48” (ATVLP-48)
WHEEL CARRIAGE WELDMENT
ASSEMBLY & OPERATORS MANUAL - ATV LAND PLANE
CAT 2 & 3 HITCH PIN
CAT 3 TOP LINK PIN
FRONT PIVOT PIN
SMV SIGN RECEIVING BRACKET
FRONT GANG BEAM, 3” X 3” X 60”
REAR GANG BEAM, 3” X 3” X 60”
4” X 4” GANG BEAM 108”
AXLE, 1” X 49” (6 BLADE - 9” SPACING)
AXLE, 1” X 57 3/4” (6 BLADE - 9” SPACING)
Effective:
December 23, 2013
notice.
$283.63
$79.88
$84.16
$109.86
$131.16
$17.38
$95.27
$354.12
$17.38
$39.94
$15.98
$16.67
$9.83
$173.64
$173.64
$185.22
$185.22
$208.37
$208.37
$231.53
$231.53
$254.68
$254.68
$316.38
$58.58
$78.26
$92.26
63
Effective:
December 23, 2013
notice.
64
2219 Tufline Lane
Columbus, MS 39705
Phone: (662)328-8347
Fax: (662)328-8361

Tufline Parts - Farmco Distributing Inc

Transcription

Similar documents

Tufline Wholegoods

idler catalog - Superior Industries

One Step Rod Cutter - Section 8

Door Parts Catalog - Erect-A-Tube