rigid frames / 1-1/4” tubing

Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Rigids
Kickstands
Handlebars
Exhaust
Misc.
44
Frames
Frames
RIGID FRAMES / 1-1/4” TUBING
* All DOM steel tubing, mandrel bent * TIG-MIG welded
* Frames will accept Evolution motors (except Twin Cam), Shovelhead & Panhead engines
with clearance for cylinders up to .200” taller than stock Evolution
* Run a 5 or 6-speed Softail-type transmission in these frames
Swingarms
GAS TANK MOUNTS are welded to the frame and accept
Softail-style flatside tanks
Beefy 1-1/2” tubing used on all
FRAME BACKBONES
Fenders
Struts
NECKS are CNC machined
from solid steel
REAR FENDER MOUNTS provide
a solid, secure platform for fastening
a wide variety of fenders
Gas Tanks
OIL TANK MOUNTS are set-up
to accept stock or custom
Softail-style oil tanks,with purchase of K13006 rear mounting
bracket
Oil Tanks
REAR AXLE CARRIERS
are solid steel
230/240/250 frames come
with our 1” axle, whereas
the stock width, 180 & 200
width frames are
delivered with 3/4” axles
NECK RAKE angles
30º / 34º / 38º
All
Fwd
Controls
frames come complete
Manufacturer’s
Statement of Origin
with a
S.N. BOSS
Kickstands
FRONT RAIL STRETCHES of
0” / 2 “ / 4” / 8”
Provision for 1986-1999
Softail-style BRAKE CALIPERS
and caliper brackets
TRANSMISSION PLATES are available
in welded-in, one-piece versions
with built-in offsets, providing the best
possible driveline alignment as well as
unit construction strength
(Some models are designed for use with
traditional-type trans plate)
REAR MOTOR MOUNT is
milled after welding
Handlebars
FRONT MOTOR MOUNT is solid steel
Wide tire models have built-in offsets
Exhaust
Frame shown is 4” stretch model
Misc.
Frames
45
Frames
RIGID FRAMES / 1-1/4” TUBING / STOCK WIDTH
* Frames use stock width disc brake wheel, 1986-1999 Softail-style brakes, axles and spacers
* Run a 1-1/2” belt (or chain) * Frame is made with an integral 1-piece transmission mount for Softail-style 5-speeds
* Component kits are included, where indicated
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Part #
Style
Up Stretch
30º
0"
34º
2"
K16051
K16052 Rigid
Rigid
Tire Width Tubing
Stock
Stock
1-1/4"
1-1/4"
Rake
Kickstands
Handlebars
Included
Exhaust
Misc.
Part #
Style
K16054
K16055 Frames
Stock
Stock
1-1/4"
1-1/4"
Rake
Up Stretch Back Bone Str.
34º
4"
1-1/2"
38º
4"
1-1/2"
46
Rigid
Rigid
Tire Width Tubing
RIGID FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH
Frames
* Designed for 180 width tire w/1-1/2” belt or 200 width tire with a chain
* Offset built into frame...no spacing required * Stock motor and transmission bolt right in without modification
* Trans mount built into frame, providing additional strength & accurate driveline alignment
* Component kit is included
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Sold Separately
Oil Tanks
Part #
K16056
K16057 K16058
Style
Tire Width
Rigid
180
Rigid
180
Rigid 180
Up Stretch Includes
30º
0"
Axle Kit
34º
2"
Axle Kit
38º
2"Axle Kit
Tubing
1-1/4"
1-1/4"
1-1/4"
Rake
Fwd
Controls
Kickstands
Kit Included
Handlebars
Exhaust
Sold Separately
Part #
Style
Up Stretch Back Bone Str. Includes
Axle Kit
34º
4"
1-1/2"
Axle Kit
38º
4"
1-1/2"
K16060
K16061 Rigid
Rigid
Tire Width Tubing
180
180
1-1/4"
1-1/4"
Rake
Frames
Misc.
47
Frames
RIGID FRAMES / 1-1/4” TUBING / 200 TIRE WIDTH
* Designed for 200 width tire w/1-1/2” belt or chain
* Offset is built into the frame...use 1/2” spacer between engine and inner primary cover
use 1/2” longer spacing on engine sprocket or pulley
* Component kit is included
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Oil Tanks
Part #
K16074 Style
Rigid
Fwd
Controls
Tire Width Tubing
1-1/4"
200
Rake
34º
Up Stretch Back Bone Str. Includes
4"
1-1/2"
Axle Kit
Kickstands
Kit Included
Handlebars
Exhaust
Part #
Misc.
K16063 K16064
48
Frames
Style
Up Stretch Back Bone Str. Includes
34º
8"
4"
Axle Kit
38º
8"
4"
Axle Kit
Rigid
Rigid
Tire Width Tubing
200
200
1-1/4"
1-1/4" Rake
RIGID FRAMES / 1-1/4” TUBING / 230/240/250 TIRE WIDTH
Frames
* Designed for 230/240 tires using a 1-1/2” belt (or chain), and 250 width tires using a 1-1/8” belt (or chain)
* 1-piece transmission mount is welded to frame and provides unit construction strength & better driveline alignment
* Offset is built into frame...use 1” spacer between engine and inner primary cover
use 1” spacer on engine sprocket or pulley
* Component kit is included
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Oil Tanks
Part #
K16066 K16068
Style
Rigid
Rigid
Tire Width Tubing
230/240/250 1-1/4"
230/240/250 1-1/4" Rake
Up Stretch Includes
34º
2"
1" Axle Kit
38º
2"
1" Axle Kit
Fwd Controls
Kickstands
Kit Included
Handlebars
Exhaust
Part #
K16071 K16073
Style
Rigid
Rigid
Tire Width Tubing
230/240/250 1-1/4"
230/240/250 1-1/4" Rake
Up Stretch Back Bone Str. Includes
34º
4"
1-1/2"
38º
4"
1-1/2"
Misc.
Axle Kit
Axle Kit
Frames
49
Frames
RIGID FRAMES / 1-1/4” TUBING / STOCK WIDTH
* Frames are designed for removable transmission plate for chain drive 4 and 5-speeds
* Uses stock width disc brake wheel, Softail-style brakes (pre-2000), axle & adjusters
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Part #
K16001 K16002
Rigid
Rigid
Tire Width Tubing
1-1/4"
Stock
Stock 1-1/4" Frames
Rake
Up Stretch
30º
0"
34º
2"
Misc.
50
Style
Frames
RIGID FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH
* Frames are engineered for 180 tire w/ 1-1/2” belt or 200 tire with chain
* Offset built into frame. . .no spacing required
* Stock motor and transmission bolt-in
* Accepts 4 or 5-speed transmissions
* Requires using a removable trans plate
* Component kit is included
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Sold Separately
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Part #
K16006 K16007
K16008
Style
Tire Width Tubing
Rigid
180
Rigid
180
Rigid 180
1-1/4"
1-1/4" 1-1/4"
Rake
Up Stretch Includes
30º
34º
38º
0"
2"
2"
Exhaust
Axle Kit
Axle Kit
Axle Kit
Misc.
Frames
51
Frames
RIGID FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH
* Frames are engineered for 180 tire w/ 1-1/2” belt or 200 tire with chain
* Offset built into frame. . .no spacing required
* Stock motor and transmission bolt-in
* Accepts 4 or 5-speed transmissions
* Requires using a removable trans plate
* Component kit is included
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Sold Separately
Oil Tanks
Part #
Style
K16010 K16011
Fwd
Controls
Rigid
Rigid
Tire Width Tubing
180
180
1-1/4"
1-1/4" Rake
Up Stretch Back Bone Str. Includes
34º
4"
1-1/2"
38º
4"
1-1/2"
RIGID FRAMES / 1-1/4” TUBING / 230/240/250 TIRE WIDTH
* Run a 230/240 tire with a 1-1/2” belt or chain, 250 tire with 1-1/8” belt or chain
* Offset built into frame. . .requires 1” spacing between engine & inner primary cover and 1” spacer on engine sprocket or pulley
* Accepts 5-speed transmissions
* Requires using a removable transmission plate
* Component kit is included
Kickstands
Handlebars
Kit Included
Exhaust
Part #
Misc.
K16016 52
Style
Rigid
Tire Width Tubing
230/240/250 1-1/4"
Frames
Axle Kit
Axle Kit
Rake
Up Stretch Includes
38º
2"
Axle Kit
Frames
RIGID SPORTSTER FRAMES / 1-1/4” TUBING
* Feature 1-1/4” thick wall, DOM steel tubing with 1-1/2” backbones
* All frames are TIG-MIG welded & will accept Sportster Engines(1986-2003)
* Component Kits are included with purchase of frame... These kits are not sold seperately
* Standard frames accept a 130 tire with a conventional 1-1/8" belt drive assembly or chain,
and 180 width frames can take a stock belt, or a 200-series tire when using a chain.
* Frame is designed to use a 1/2" transmission off-set sprocket for proper balance.
* Available with neck rakes of 30º and 34º and up-stretches of 0"/ 2"/ 3"/ and 4".
Swingarms
Fenders
Struts
All frames come complete with a Manufacturer’s Statement of Origin
Gas Tanks
NECKS are CNC-machined
from solid steel
Oil Tanks
1-1/2” BACKBONE TUBING
Available Stretch Configurations
0" / 1-1/2" / 4"
OIL TANK MOUNTS
NECK RAKE
ANGLES
30º / 34º
TOP MOTOR MOUNT
REAR AXLES are
supplied stock and 180.
Frame uses 3/4" axles.
VOLTAGE REGULATOR
MOUNTS
FRONT MOTOR
MOUNTS
FRONT RAIL STRETCHES of
0” / 2 “ / 3” / 4”
Fwd
Controls
TRANSMISSION
PLATE
REAR FENDER
MOUNTS
Kickstands
Handlebars
REAR AXLE CARRIERS
are precision machined
billet steel offered
with open axle.
Exhaust
Misc.
Frames
53