wiSTARTM Light Level Sensor

Comments

Transcription

wiSTARTM Light Level Sensor
wiSTARTM Light Level Sensor
WIRELESS LIGHTING CONTROLS
PROJECT INFORMATION
TITLE
24
COMPLIANCE
Project Name
WIRELESS
DAYLIGHT
HARVESTING
NO BATTERIES OR
POWER REQUIRED
Catalog No.Date
TM
Hubbell Control Solutions' self-powered wiSTAR™ Light Level Sensor measures and
reports the level of available natural light. Used in conjunction with the wiSTAR In-line
Dimming Module, it enables implementation of energy saving daylight harvesting
control systems.
The sensor uses a solar cell to measure the amount of natural light and to generate
the required energy for its operation, eliminating the need for periodic battery
changes. No additional wiring is needed, and installation can be completed in a
matter of minutes. On-going maintenance costs are eliminated.
The wiSTAR sensor enables a new level of energy saving for rooms, hallways and
other common areas. Unit features clean contemporary styling.
WIS-LLS-WH
Using WIS-LLS-WH sensor with WIS-IDM-WH Dimming Relay enables
daylight harvesting function with smooth performance.
PRODUCT FEATURES
• Harvests ambient solar energy to power the sensor and
wireless communication
• Built-in tests to confirm operation
• Two buttons with LED indicator lights configuring the device
• Alternate power supply options for extreme low light conditions
• Mounts easily on any ceiling material
2.35”
[59.57]
1.15”
[29.21]
6.3”
[159.96]
General Specifications
Power Supply
Solar energy harvesting
RF Communications
EnOcean 902 MHz
Transmission Range
80ft (25m)
Measurement Range
0 – 1020 lux
Resolution
4 lux
Typical Accuracy
+- 5% @ full scale, 68°F
Measurement Interval
1 minute
Transmission Interval
Immediate if change > 50 lux since last transmission
Heartbeat every 20-30 minutes (affected at random)
Minimum Operating Light
50 lux (for auto-off only)
Dimensions
6.3” H x 2.36” W x 1.15” D (160mm x 60mm x 37mm)
Mounting Height
At the ceiling, close to the ambient light source (window)
Startup Charge Times (from empty)
5 min @ 200 lux
Note: Bright light or battery can be temporarily used to shorten initial startup charge times
Charge Time to Full
30 hrs @ 200 lux
Sustaining Charge Time
3 hours per day @ 200 lux
Operating Life in Total Darkness
80 hours (after full charge)
EnOcean Profile
A5-06-02
Ordering Information
WIS-LLS-WH
MODEL
WIS-LLS-WH
wiSTAR™ Light Level Sensor Module
9601 Dessau Road | Building One | Austin, Texas 78754 | 512-450-1100 | 512-450-1215 fax | www.hubbell-automation.com
4309A 10.20.2016

Similar documents